From b16a228d05a95b27d77d07a91688382f68ece8a7 Mon Sep 17 00:00:00 2001 From: "simon@thekelleys.org.uk" Date: Sun, 30 Oct 2005 15:50:15 +0000 Subject: [PATCH] Atmel wireless update * Merge PCMCIA card table with new Brodowski PCMCIA id table. * Add missing entries to PCMCIA id table. * Other tweaks to conform with Documentation/driver-changes.txt (types, call request_region, etc) * Fix size of requested IO region. * Reduce printk verbosity. * Remove EXPERIMENTAL * tweak to association code - don't force shared key authentication when wep in use. Signed-off-by: Jeff Garzik --- drivers/net/wireless/atmel_cs.c | 176 +++++++++++----------------------------- 1 file changed, 47 insertions(+), 129 deletions(-) (limited to 'drivers/net/wireless/atmel_cs.c') diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index ff031a3985b3..0c3301ef70cc 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -63,6 +63,7 @@ be present but disabled -- but it can then be enabled for specific modules at load time with a 'pc_debug=#' option to insmod. */ + #ifdef PCMCIA_DEBUG static int pc_debug = PCMCIA_DEBUG; module_param(pc_debug, int, 0); @@ -288,41 +289,6 @@ static int card_present(void *arg) return 0; } -/* list of cards we know about and their firmware requirements. - Go either by Manfid or version strings. - Cards not in this list will need a firmware parameter to the module - in all probability. Note that the SMC 2632 V2 and V3 have the same - manfids, so we ignore those and use the version1 strings. */ - -static struct { - int manf, card; - char *ver1; - AtmelFWType firmware; - char *name; -} card_table[] = { - { 0, 0, "WLAN/802.11b PC CARD", ATMEL_FW_TYPE_502D, "Actiontec 802CAT1" }, - { 0, 0, "ATMEL/AT76C502AR", ATMEL_FW_TYPE_502, "NoName-RFMD" }, - { 0, 0, "ATMEL/AT76C502AR_D", ATMEL_FW_TYPE_502D, "NoName-revD" }, - { 0, 0, "ATMEL/AT76C502AR_E", ATMEL_FW_TYPE_502E, "NoName-revE" }, - { 0, 0, "ATMEL/AT76C504", ATMEL_FW_TYPE_504, "NoName-504" }, - { 0, 0, "ATMEL/AT76C504A", ATMEL_FW_TYPE_504A_2958, "NoName-504a-2958" }, - { 0, 0, "ATMEL/AT76C504_R", ATMEL_FW_TYPE_504_2958, "NoName-504-2958" }, - { MANFID_3COM, 0x0620, NULL, ATMEL_FW_TYPE_502_3COM, "3com 3CRWE62092B" }, - { MANFID_3COM, 0x0696, NULL, ATMEL_FW_TYPE_502_3COM, "3com 3CRSHPW196" }, - { 0, 0, "SMC/2632W-V2", ATMEL_FW_TYPE_502, "SMC 2632W-V2" }, - { 0, 0, "SMC/2632W", ATMEL_FW_TYPE_502D, "SMC 2632W-V3" }, - { 0xd601, 0x0007, NULL, ATMEL_FW_TYPE_502, "Sitecom WLAN-011" }, - { 0x01bf, 0x3302, NULL, ATMEL_FW_TYPE_502E, "Belkin F5D6020-V2" }, - { 0, 0, "BT/Voyager 1020 Laptop Adapter", ATMEL_FW_TYPE_502, "BT Voyager 1020" }, - { 0, 0, "IEEE 802.11b/Wireless LAN PC Card", ATMEL_FW_TYPE_502, "Siemens Gigaset PC Card II" }, - { 0, 0, "IEEE 802.11b/Wireless LAN Card S", ATMEL_FW_TYPE_504_2958, "Siemens Gigaset PC Card II" }, - { 0, 0, "CNet/CNWLC 11Mbps Wireless PC Card V-5", ATMEL_FW_TYPE_502E, "CNet CNWLC-811ARL" }, - { 0, 0, "Wireless/PC_CARD", ATMEL_FW_TYPE_502D, "Planet WL-3552" }, - { 0, 0, "OEM/11Mbps Wireless LAN PC Card V-3", ATMEL_FW_TYPE_502, "OEM 11Mbps WLAN PCMCIA Card" }, - { 0, 0, "11WAVE/11WP611AL-E", ATMEL_FW_TYPE_502E, "11WAVE WaveBuddy" }, - { 0, 0, "LG/LW2100N", ATMEL_FW_TYPE_502E, "LG LW2100N 11Mbps WLAN PCMCIA Card" }, -}; - static void atmel_config(dev_link_t *link) { client_handle_t handle; @@ -331,10 +297,11 @@ static void atmel_config(dev_link_t *link) local_info_t *dev; int last_fn, last_ret; u_char buf[64]; - int card_index = -1, done = 0; - + struct pcmcia_device_id *did; + handle = link->handle; dev = link->priv; + did = handle_to_dev(handle).driver_data; DEBUG(0, "atmel_config(0x%p)\n", link); @@ -343,59 +310,6 @@ static void atmel_config(dev_link_t *link) tuple.TupleDataMax = sizeof(buf); tuple.TupleOffset = 0; - tuple.DesiredTuple = CISTPL_MANFID; - if (pcmcia_get_first_tuple(handle, &tuple) == 0) { - int i; - cistpl_manfid_t *manfid; - CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple)); - CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse)); - manfid = &(parse.manfid); - for (i = 0; i < sizeof(card_table)/sizeof(card_table[0]); i++) { - if (!card_table[i].ver1 && - manfid->manf == card_table[i].manf && - manfid->card == card_table[i].card) { - card_index = i; - done = 1; - } - } - } - - tuple.DesiredTuple = CISTPL_VERS_1; - if (!done && (pcmcia_get_first_tuple(handle, &tuple) == 0)) { - int i, j, k; - cistpl_vers_1_t *ver1; - CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple)); - CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse)); - ver1 = &(parse.version_1); - - for (i = 0; i < sizeof(card_table)/sizeof(card_table[0]); i++) { - for (j = 0; j < ver1->ns; j++) { - char *p = card_table[i].ver1; - char *q = &ver1->str[ver1->ofs[j]]; - if (!p) - goto mismatch; - for (k = 0; k < j; k++) { - while ((*p != '\0') && (*p != '/')) p++; - if (*p == '\0') { - if (*q != '\0') - goto mismatch; - } else { - p++; - } - } - while((*q != '\0') && (*p != '\0') && - (*p != '/') && (*p == *q)) p++, q++; - if (((*p != '\0') && *p != '/') || *q != '\0') - goto mismatch; - } - card_index = i; - break; /* done */ - - mismatch: - j = 0; /* dummy stmt to shut up compiler */ - } - } - /* This reads the card's CONFIG tuple to find its configuration registers. @@ -512,12 +426,13 @@ static void atmel_config(dev_link_t *link) ((local_info_t*)link->priv)->eth_dev = init_atmel_card(link->irq.AssignedIRQ, link->io.BasePort1, - card_index == -1 ? ATMEL_FW_TYPE_NONE : card_table[card_index].firmware, + did ? did->driver_info : ATMEL_FW_TYPE_NONE, &handle_to_dev(handle), card_present, link); if (!((local_info_t*)link->priv)->eth_dev) - goto cs_failed; + goto cs_failed; + /* At this point, the dev_node_t structure(s) need to be @@ -526,26 +441,7 @@ static void atmel_config(dev_link_t *link) strcpy(dev->node.dev_name, ((local_info_t*)link->priv)->eth_dev->name ); dev->node.major = dev->node.minor = 0; link->dev = &dev->node; - - /* Finally, report what we've done */ - printk(KERN_INFO "%s: %s%sindex 0x%02x: Vcc %d.%d", - dev->node.dev_name, - card_index == -1 ? "" : card_table[card_index].name, - card_index == -1 ? "" : " ", - link->conf.ConfigIndex, - link->conf.Vcc/10, link->conf.Vcc%10); - if (link->conf.Vpp1) - printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq.AssignedIRQ); - if (link->io.NumPorts1) - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1+link->io.NumPorts1-1); - if (link->io.NumPorts2) - printk(" & 0x%04x-0x%04x", link->io.BasePort2, - link->io.BasePort2+link->io.NumPorts2-1); - printk("\n"); - + link->state &= ~DEV_CONFIG_PENDING; return; @@ -572,7 +468,7 @@ static void atmel_release(dev_link_t *link) link->dev = NULL; if (dev) - stop_atmel_card(dev, 0); + stop_atmel_card(dev); ((local_info_t*)link->priv)->eth_dev = NULL; /* Don't bother checking to see if these succeed or not */ @@ -640,25 +536,47 @@ static int atmel_event(event_t event, int priority, } /* atmel_event */ /*====================================================================*/ +/* We use the driver_info field to store the correct firmware type for a card. */ + +#define PCMCIA_DEVICE_MANF_CARD_INFO(manf, card, info) { \ + .match_flags = PCMCIA_DEV_ID_MATCH_MANF_ID| \ + PCMCIA_DEV_ID_MATCH_CARD_ID, \ + .manf_id = (manf), \ + .card_id = (card), \ + .driver_info = (kernel_ulong_t)(info), } + +#define PCMCIA_DEVICE_PROD_ID12_INFO(v1, v2, vh1, vh2, info) { \ + .match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \ + PCMCIA_DEV_ID_MATCH_PROD_ID2, \ + .prod_id = { (v1), (v2), NULL, NULL }, \ + .prod_id_hash = { (vh1), (vh2), 0, 0 }, \ + .driver_info = (kernel_ulong_t)(info), } + static struct pcmcia_device_id atmel_ids[] = { - PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0620), - PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0696), - PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x3302), - PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0007), - PCMCIA_DEVICE_PROD_ID12("11WAVE", "11WP611AL-E", 0x9eb2da1f, 0xc9a0d3f9), - PCMCIA_DEVICE_PROD_ID12("ATMEL", "AT76C502AR", 0xabda4164, 0x41b37e1f), - PCMCIA_DEVICE_PROD_ID12("ATMEL", "AT76C504", 0xabda4164, 0x5040670a), - PCMCIA_DEVICE_PROD_ID12("ATMEL", "AT76C504A", 0xabda4164, 0xe15ed87f), - PCMCIA_DEVICE_PROD_ID12("BT", "Voyager 1020 Laptop Adapter", 0xae49b86a, 0x1e957cd5), - PCMCIA_DEVICE_PROD_ID12("CNet", "CNWLC 11Mbps Wireless PC Card V-5", 0xbc477dde, 0x502fae6b), - PCMCIA_DEVICE_PROD_ID12("IEEE 802.11b", "Wireless LAN PC Card", 0x5b878724, 0x122f1df6), - PCMCIA_DEVICE_PROD_ID12("OEM", "11Mbps Wireless LAN PC Card V-3", 0xfea54c90, 0x1c5b0f68), - PCMCIA_DEVICE_PROD_ID12("SMC", "2632W", 0xc4f8b18b, 0x30f38774), - PCMCIA_DEVICE_PROD_ID12("SMC", "2632W-V2", 0xc4f8b18b, 0x172d1377), - PCMCIA_DEVICE_PROD_ID12("Wireless", "PC", 0xa407ecdd, 0x556e4d7e), - PCMCIA_DEVICE_PROD_ID12("WLAN", "802.11b PC CARD", 0x575c516c, 0xb1f6dbc4), + PCMCIA_DEVICE_MANF_CARD_INFO(0x0101, 0x0620, ATMEL_FW_TYPE_502_3COM), + PCMCIA_DEVICE_MANF_CARD_INFO(0x0101, 0x0696, ATMEL_FW_TYPE_502_3COM), + PCMCIA_DEVICE_MANF_CARD_INFO(0x01bf, 0x3302, ATMEL_FW_TYPE_502E), + PCMCIA_DEVICE_MANF_CARD_INFO(0xd601, 0x0007, ATMEL_FW_TYPE_502), + PCMCIA_DEVICE_PROD_ID12_INFO("11WAVE", "11WP611AL-E", 0x9eb2da1f, 0xc9a0d3f9, ATMEL_FW_TYPE_502E), + PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C502AR", 0xabda4164, 0x41b37e1f, ATMEL_FW_TYPE_502), + PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C502AR_D", 0xabda4164, 0x3675d704, ATMEL_FW_TYPE_502D), + PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C502AR_E", 0xabda4164, 0x4172e792, ATMEL_FW_TYPE_502E), + PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C504_R", 0xabda4164, 0x917f3d72, ATMEL_FW_TYPE_504_2958), + PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C504", 0xabda4164, 0x5040670a, ATMEL_FW_TYPE_504), + PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C504A", 0xabda4164, 0xe15ed87f, ATMEL_FW_TYPE_504A_2958), + PCMCIA_DEVICE_PROD_ID12_INFO("BT", "Voyager 1020 Laptop Adapter", 0xae49b86a, 0x1e957cd5, ATMEL_FW_TYPE_502), + PCMCIA_DEVICE_PROD_ID12_INFO("CNet", "CNWLC 11Mbps Wireless PC Card V-5", 0xbc477dde, 0x502fae6b, ATMEL_FW_TYPE_502E), + PCMCIA_DEVICE_PROD_ID12_INFO("IEEE 802.11b", "Wireless LAN PC Card", 0x5b878724, 0x122f1df6, ATMEL_FW_TYPE_502), + PCMCIA_DEVICE_PROD_ID12_INFO("IEEE 802.11b", "Wireless LAN Card S", 0x5b878724, 0x5fba533a, ATMEL_FW_TYPE_504_2958), + PCMCIA_DEVICE_PROD_ID12_INFO("OEM", "11Mbps Wireless LAN PC Card V-3", 0xfea54c90, 0x1c5b0f68, ATMEL_FW_TYPE_502), + PCMCIA_DEVICE_PROD_ID12_INFO("SMC", "2632W", 0xc4f8b18b, 0x30f38774, ATMEL_FW_TYPE_502D), + PCMCIA_DEVICE_PROD_ID12_INFO("SMC", "2632W-V2", 0xc4f8b18b, 0x172d1377, ATMEL_FW_TYPE_502), + PCMCIA_DEVICE_PROD_ID12_INFO("Wireless", "PC_CARD", 0xa407ecdd, 0x119f6314, ATMEL_FW_TYPE_502D), + PCMCIA_DEVICE_PROD_ID12_INFO("WLAN", "802.11b PC CARD", 0x575c516c, 0xb1f6dbc4, ATMEL_FW_TYPE_502D), + PCMCIA_DEVICE_PROD_ID12_INFO("LG", "LW2100N", 0xb474d43a, 0x6b1fec94, ATMEL_FW_TYPE_502E), PCMCIA_DEVICE_NULL }; + MODULE_DEVICE_TABLE(pcmcia, atmel_ids); static struct pcmcia_driver atmel_driver = { -- cgit v1.2.1