From 8f02d8da969a73133d82edaaa63f6286fba0195a Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Tue, 3 Mar 2015 13:46:44 +0300 Subject: stmmac: check IRQ availability early on probe Currently we're getting IRQs after lots of resources are already allocated: * netdev * clocks * MDIO bus Also HW gets initialized by the time when checking IRQs as well. Now there's a possibility for master interrupt controller to be not probed yet. This will lead to exit from GMAC probe routine with "- EPROBE_DEFER" and so deferred probe will hapen later on. But since we exited the first GMAC probe without release of all allocated resources there could be conflicts on subsequent probes. For example this is what happens for me: --->8--- stmmaceth e0018000.ethernet: no reset control found stmmac - user ID: 0x10, Synopsys ID: 0x37 Ring mode enabled DMA HW capability register supported Normal descriptors RX Checksum Offload Engine supported (type 2) TX Checksum insertion supported Enable RX Mitigation via HW Watchdog Timer libphy: stmmac: probed eth0: PHY ID 20005c7a at 1 IRQ POLL (stmmac-0:01) active platform e0018000.ethernet: Driver stmmaceth requests probe deferral ... ... ... stmmaceth e0018000.ethernet: no reset control found stmmac - user ID: 0x10, Synopsys ID: 0x37 Ring mode enabled DMA HW capability register supported Normal descriptors RX Checksum Offload Engine supported (type 2) TX Checksum insertion supported Enable RX Mitigation via HW Watchdog Timer ------------[ cut here ]------------ WARNING: CPU: 0 PID: 6 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x4e/0x68() sysfs: cannot create duplicate filename '/devices/platform/axs10x_mb/e0018000.ethernet/mdio_bus/stmmac-0' CPU: 0 PID: 6 Comm: kworker/u2:0 Not tainted 4.0.0-rc1-next-20150303+#8 Workqueue: deferwq deferred_probe_work_func Stack Trace: arc_unwind_core+0xb8/0x114 warn_slowpath_common+0x5a/0x8c warn_slowpath_fmt+0x2e/0x38 sysfs_warn_dup+0x4e/0x68 sysfs_create_dir_ns+0x98/0xa0 kobject_add_internal+0x8c/0x2e8 kobject_add+0x4a/0x8c device_add+0xc6/0x448 mdiobus_register+0x6c/0x164 stmmac_mdio_register+0x112/0x264 stmmac_dvr_probe+0x6c0/0x85c stmmac_pltfr_probe+0x2e4/0x50c platform_drv_probe+0x26/0x5c really_probe+0x76/0x1dc bus_for_each_drv+0x42/0x7c device_attach+0x64/0x6c bus_probe_device+0x74/0xa4 deferred_probe_work_func+0x50/0x84 process_one_work+0xf8/0x2cc worker_thread+0x110/0x478 kthread+0x8a/0x9c ret_from_fork+0x14/0x18 ---[ end trace a2dfaa7d630c8be1 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 6 at lib/kobject.c:240 kobject_add_internal+0x218/0x2e8() kobject_add_internal failed for stmmac-0 with -EEXIST, don't try to register things with the same name in the same di. CPU: 0 PID: 6 Comm: kworker/u2:0 Tainted: G W 4.0.0-rc1-next-20150303+ #8 Workqueue: deferwq deferred_probe_work_func Stack Trace: arc_unwind_core+0xb8/0x114 warn_slowpath_common+0x5a/0x8c warn_slowpath_fmt+0x2e/0x38 kobject_add_internal+0x218/0x2e8 kobject_add+0x4a/0x8c device_add+0xc6/0x448 mdiobus_register+0x6c/0x164 stmmac_mdio_register+0x112/0x264 stmmac_dvr_probe+0x6c0/0x85c stmmac_pltfr_probe+0x2e4/0x50c platform_drv_probe+0x26/0x5c really_probe+0x76/0x1dc bus_for_each_drv+0x42/0x7c device_attach+0x64/0x6c bus_probe_device+0x74/0xa4 deferred_probe_work_func+0x50/0x84 process_one_work+0xf8/0x2cc worker_thread+0x110/0x478 kthread+0x8a/0x9c ret_from_fork+0x14/0x18 ---[ end trace a2dfaa7d630c8be2 ]--- libphy: mii_bus stmmac-0 failed to register : Cannot register as MDIO bus stmmac_pltfr_probe: main driver probe failed stmmaceth: probe of e0018000.ethernet failed with error -22 --->8--- Essential fix is to check for IRQs availability as early as possible and then safely go to deferred probe if IRQs are not there yet. Signed-off-by: Alexey Brodkin Cc: Vineet Gupta Cc: Andy Shevchenko Cc: Giuseppe Cavallaro Cc: Sonic Zhang Cc: David S. Miller Signed-off-by: David S. Miller --- .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 65 ++++++++++++---------- 1 file changed, 36 insertions(+), 29 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index fb846ebba1d9..f9b42f11950f 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -272,6 +272,37 @@ static int stmmac_pltfr_probe(struct platform_device *pdev) struct stmmac_priv *priv = NULL; struct plat_stmmacenet_data *plat_dat = NULL; const char *mac = NULL; + int irq, wol_irq, lpi_irq; + + /* Get IRQ information early to have an ability to ask for deferred + * probe if needed before we went too far with resource allocation. + */ + irq = platform_get_irq_byname(pdev, "macirq"); + if (irq < 0) { + if (irq != -EPROBE_DEFER) { + dev_err(dev, + "MAC IRQ configuration information not found\n"); + } + return irq; + } + + /* On some platforms e.g. SPEAr the wake up irq differs from the mac irq + * The external wake up irq can be passed through the platform code + * named as "eth_wake_irq" + * + * In case the wake up interrupt is not passed from the platform + * so the driver will continue to use the mac irq (ndev->irq) + */ + wol_irq = platform_get_irq_byname(pdev, "eth_wake_irq"); + if (wol_irq < 0) { + if (wol_irq == -EPROBE_DEFER) + return -EPROBE_DEFER; + wol_irq = irq; + } + + lpi_irq = platform_get_irq_byname(pdev, "eth_lpi"); + if (lpi_irq == -EPROBE_DEFER) + return -EPROBE_DEFER; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); addr = devm_ioremap_resource(dev, res); @@ -323,39 +354,15 @@ static int stmmac_pltfr_probe(struct platform_device *pdev) return PTR_ERR(priv); } + /* Copy IRQ values to priv structure which is now avaialble */ + priv->dev->irq = irq; + priv->wol_irq = wol_irq; + priv->lpi_irq = lpi_irq; + /* Get MAC address if available (DT) */ if (mac) memcpy(priv->dev->dev_addr, mac, ETH_ALEN); - /* Get the MAC information */ - priv->dev->irq = platform_get_irq_byname(pdev, "macirq"); - if (priv->dev->irq < 0) { - if (priv->dev->irq != -EPROBE_DEFER) { - netdev_err(priv->dev, - "MAC IRQ configuration information not found\n"); - } - return priv->dev->irq; - } - - /* - * On some platforms e.g. SPEAr the wake up irq differs from the mac irq - * The external wake up irq can be passed through the platform code - * named as "eth_wake_irq" - * - * In case the wake up interrupt is not passed from the platform - * so the driver will continue to use the mac irq (ndev->irq) - */ - priv->wol_irq = platform_get_irq_byname(pdev, "eth_wake_irq"); - if (priv->wol_irq < 0) { - if (priv->wol_irq == -EPROBE_DEFER) - return -EPROBE_DEFER; - priv->wol_irq = priv->dev->irq; - } - - priv->lpi_irq = platform_get_irq_byname(pdev, "eth_lpi"); - if (priv->lpi_irq == -EPROBE_DEFER) - return -EPROBE_DEFER; - platform_set_drvdata(pdev, priv->dev); pr_debug("STMMAC platform driver registration completed"); -- cgit v1.2.1 From cd33ccf5fd87e94342b6cf8990e2e1570632c276 Mon Sep 17 00:00:00 2001 From: Nicolas Schichan Date: Tue, 3 Mar 2015 12:45:12 +0100 Subject: bcm63xx_enet: fix poll callback. In case there was some tx buffer reclaimed and not enough rx packets to consume the whole budget, napi_complete would not be called and interrupts would be kept disabled, effectively resulting in the network core never to call the poll callback again and no rx/tx interrupts to be fired either. Fix that by only accounting the rx work done in the poll callback. Signed-off-by: Nicolas Schichan Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c index 21206d33b638..a7f2cc3e485e 100644 --- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c +++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c @@ -486,7 +486,7 @@ static int bcm_enet_poll(struct napi_struct *napi, int budget) { struct bcm_enet_priv *priv; struct net_device *dev; - int tx_work_done, rx_work_done; + int rx_work_done; priv = container_of(napi, struct bcm_enet_priv, napi); dev = priv->net_dev; @@ -498,14 +498,14 @@ static int bcm_enet_poll(struct napi_struct *napi, int budget) ENETDMAC_IR, priv->tx_chan); /* reclaim sent skb */ - tx_work_done = bcm_enet_tx_reclaim(dev, 0); + bcm_enet_tx_reclaim(dev, 0); spin_lock(&priv->rx_lock); rx_work_done = bcm_enet_receive_queue(dev, budget); spin_unlock(&priv->rx_lock); - if (rx_work_done >= budget || tx_work_done > 0) { - /* rx/tx queue is not yet empty/clean */ + if (rx_work_done >= budget) { + /* rx queue is not yet empty/clean */ return rx_work_done; } -- cgit v1.2.1 From ecadf4e71de079d4050f249547d25b3bd333f89f Mon Sep 17 00:00:00 2001 From: Iyappan Subramanian Date: Tue, 3 Mar 2015 11:39:41 -0800 Subject: drivers: net: xgene: fix new firmware backward compatibility with older driver This patch fixes the backward compatibile of the older driver with the newer firmware by making the binding unique so that the older driver won't recognize the non-supported interfaces. Signed-off-by: Iyappan Subramanian Signed-off-by: Keyur Chudgar Tested-by: Mark Langsdorf Signed-off-by: David S. Miller --- drivers/net/ethernet/apm/xgene/xgene_enet_main.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c index 4de62b210c85..635a83be7e5e 100644 --- a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c @@ -1025,6 +1025,8 @@ static int xgene_enet_remove(struct platform_device *pdev) #ifdef CONFIG_ACPI static const struct acpi_device_id xgene_enet_acpi_match[] = { { "APMC0D05", }, + { "APMC0D30", }, + { "APMC0D31", }, { } }; MODULE_DEVICE_TABLE(acpi, xgene_enet_acpi_match); @@ -1033,6 +1035,8 @@ MODULE_DEVICE_TABLE(acpi, xgene_enet_acpi_match); #ifdef CONFIG_OF static struct of_device_id xgene_enet_of_match[] = { {.compatible = "apm,xgene-enet",}, + {.compatible = "apm,xgene1-sgenet",}, + {.compatible = "apm,xgene1-xgenet",}, {}, }; -- cgit v1.2.1 From 61615cd27e2fdcf698261ba77c7d93f7a7739c65 Mon Sep 17 00:00:00 2001 From: Fugang Duan Date: Wed, 4 Mar 2015 07:52:11 +0800 Subject: net: fec: fix rcv is not last issue when do suspend/resume test When do suspend/resume stress test, some log shows "rcv is not +last". The issue is that enet suspend will disable phy clock, phy link down, after resume back, enet MAC redo initial and ready to tx/rx packet, but phy still is not ready which is doing auto-negotiation. When phy link is not up, don't schdule napi soft irq. [Peter] It has fixed kernel panic after long time suspend/resume test with nfs rootfs. [ 8864.429458] fec 2188000.ethernet eth0: rcv is not +last [ 8864.434799] fec 2188000.ethernet eth0: rcv is not +last [ 8864.440088] fec 2188000.ethernet eth0: rcv is not +last [ 8864.445424] fec 2188000.ethernet eth0: rcv is not +last [ 8864.450782] fec 2188000.ethernet eth0: rcv is not +last [ 8864.456111] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 8864.464225] pgd = 80004000 [ 8864.466997] [00000000] *pgd=00000000 [ 8864.470627] Internal error: Oops: 17 [#1] SMP ARM [ 8864.475353] Modules linked in: evbug [ 8864.479006] CPU: 0 PID: 3 Comm: ksoftirqd/0 Not tainted 4.0.0-rc1-00044-g7a2a1d2 #234 [ 8864.486854] Hardware name: Freescale i.MX6 SoloX (Device Tree) [ 8864.492709] task: be069380 ti: be07a000 task.ti: be07a000 [ 8864.498137] PC is at memcpy+0x80/0x330 [ 8864.501919] LR is at gro_pull_from_frag0+0x34/0xa8 [ 8864.506735] pc : [<802bb080>] lr : [<8057c204>] psr: 00000113 [ 8864.506735] sp : be07bbd4 ip : 00000010 fp : be07bc0c [ 8864.518235] r10: 0000000e r9 : 00000000 r8 : 809c7754 [ 8864.523479] r7 : 809c7754 r6 : bb43c040 r5 : bd280cc0 r4 : 00000012 [ 8864.530025] r3 : 00000804 r2 : fffffff2 r1 : 00000000 r0 : bb43b83c [ 8864.536575] Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 8864.543904] Control: 10c5387d Table: bd14c04a DAC: 00000015 [ 8864.549669] Process ksoftirqd/0 (pid: 3, stack limit = 0xbe07a210) [ 8864.555869] Stack: (0xbe07bbd4 to 0xbe07c000) [ 8864.560250] bbc0: bd280cc0 bb43c040 809c7754 [ 8864.568455] bbe0: 809c7754 bb43b83c 00000012 8057c204 00000000 bd280cc0 bd8a0718 00000003 [ 8864.576658] bc00: be07bc5c be07bc10 8057ebf0 8057c1dc 00000000 00000000 8057ecc4 bef59760 [ 8864.584863] bc20: 00000002 bd8a0000 be07bc64 809c7754 00000000 bd8a0718 bd280cc0 bd8a0000 [ 8864.593066] bc40: 00000000 0000001c 00000000 bd8a0000 be07bc74 be07bc60 8057f148 8057eb90 [ 8864.601268] bc60: bf0810a0 00000000 be07bcf4 be07bc78 8044e7b4 8057f12c 00000000 8007df6c [ 8864.609470] bc80: bd8a0718 00000040 00000000 bd280a80 00000002 00000019 bd8a0600 bd8a1214 [ 8864.617672] bca0: bd8a0690 bf0810a0 00000000 00000000 bd8a1000 00000000 00000027 bd280cc0 [ 8864.625874] bcc0: 80062708 800625cc 000943db bd8a0718 00000001 000d1166 00000040 be7c1ec0 [ 8864.634077] bce0: 0000012c be07bd00 be07bd3c be07bcf8 8057fc98 8044e3ac 809c2ec0 3ddff000 [ 8864.642280] bd00: be07bd00 be07bd00 be07bd08 be07bd08 00000000 00000020 809c608c 00000003 [ 8864.650481] bd20: 809c6080 40000001 809c6088 00200100 be07bd84 be07bd40 8002e690 8057fac8 [ 8864.658684] bd40: be07bd64 be07bd50 00000001 04208040 000d1165 0000000a be07bd84 809c0d7c [ 8864.666885] bd60: 00000000 809c6af8 00000000 00000001 be008000 00000000 be07bd9c be07bd88 [ 8864.675087] bd80: 8002eb64 8002e564 00000125 809c0d7c be07bdc4 be07bda0 8006f100 8002eaac [ 8864.683291] bda0: c080e10c be07bde8 809c6c6c c080e100 00000002 00000000 be07bde4 be07bdc8 [ 8864.691492] bdc0: 800087a0 8006f098 806f2934 20000013 ffffffff be07be1c be07be44 be07bde8 [ 8864.699695] bde0: 800133a4 80008784 00000001 00000001 00000000 00000000 be7c1680 00000000 [ 8864.707896] be00: be0cfe00 bd93eb40 00000002 00000000 00000000 be07be44 be07be00 be07be30 [ 8864.716098] be20: 8006278c 806f2934 20000013 ffffffff be069380 be7c1680 be07be7c be07be48 [ 8864.724300] be40: 80049cfc 806f2910 00000001 00000000 80049cb4 00000000 be07be7c be7c1680 [ 8864.732502] be60: be3289c0 be069380 bd23b600 be0cfe00 be07bebc be07be80 806ed614 80049c68 [ 8864.740706] be80: be07a000 0000020a 809c608c 00000003 00000001 8002e858 be07a000 be035740 [ 8864.748907] bea0: 00000000 00000001 809d4598 00000000 be07bed4 be07bec0 806edd0c 806ed440 [ 8864.757110] bec0: be07a000 be07a000 be07bee4 be07bed8 806edd68 806edcf0 be07bef4 be07bee8 [ 8864.765311] bee0: 8002e860 806edd34 be07bf24 be07bef8 800494b0 8002e828 be069380 00000000 [ 8864.773512] bf00: be035780 be035740 8004938c 00000000 00000000 00000000 be07bfac be07bf28 [ 8864.781715] bf20: 80045928 80049398 be07bf44 00000001 00000000 be035740 00000000 00030003 [ 8864.789917] bf40: dead4ead ffffffff ffffffff 80a2716c 80b59b00 00000000 8088c954 be07bf5c [ 8864.798120] bf60: be07bf5c 00000000 00000000 dead4ead ffffffff ffffffff 80a2716c 00000000 [ 8864.806320] bf80: 00000000 8088c954 be07bf88 be07bf88 be035780 8004584c 00000000 00000000 [ 8864.814523] bfa0: 00000000 be07bfb0 8000ed10 80045858 00000000 00000000 00000000 00000000 [ 8864.822723] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 8864.830925] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 5ffbb5f7 f9fcf5e7 [ 8864.839115] Backtrace: [ 8864.841631] [<8057c1d0>] (gro_pull_from_frag0) from [<8057ebf0>] (dev_gro_receive+0x6c/0x3f8) [ 8864.850173] r6:00000003 r5:bd8a0718 r4:bd280cc0 r3:00000000 [ 8864.855958] [<8057eb84>] (dev_gro_receive) from [<8057f148>] (napi_gro_receive+0x28/0xac) [ 8864.864152] r10:bd8a0000 r9:00000000 r8:0000001c r7:00000000 r6:bd8a0000 r5:bd280cc0 [ 8864.872115] r4:bd8a0718 [ 8864.874713] [<8057f120>] (napi_gro_receive) from [<8044e7b4>] (fec_enet_rx_napi+0x414/0xc74) [ 8864.883167] r5:00000000 r4:bf0810a0 [ 8864.886823] [<8044e3a0>] (fec_enet_rx_napi) from [<8057fc98>] (net_rx_action+0x1dc/0x2ec) [ 8864.895016] r10:be07bd00 r9:0000012c r8:be7c1ec0 r7:00000040 r6:000d1166 r5:00000001 [ 8864.902982] r4:bd8a0718 [ 8864.905570] [<8057fabc>] (net_rx_action) from [<8002e690>] (__do_softirq+0x138/0x2c4) [ 8864.913417] r10:00200100 r9:809c6088 r8:40000001 r7:809c6080 r6:00000003 r5:809c608c [ 8864.921382] r4:00000020 [ 8864.923966] [<8002e558>] (__do_softirq) from [<8002eb64>] (irq_exit+0xc4/0x138) [ 8864.931289] r10:00000000 r9:be008000 r8:00000001 r7:00000000 r6:809c6af8 r5:00000000 [ 8864.939252] r4:809c0d7c [ 8864.941841] [<8002eaa0>] (irq_exit) from [<8006f100>] (__handle_domain_irq+0x74/0xe8) [ 8864.949688] r4:809c0d7c r3:00000125 [ 8864.953342] [<8006f08c>] (__handle_domain_irq) from [<800087a0>] (gic_handle_irq+0x28/0x68) [ 8864.961707] r9:00000000 r8:00000002 r7:c080e100 r6:809c6c6c r5:be07bde8 r4:c080e10c [ 8864.969597] [<80008778>] (gic_handle_irq) from [<800133a4>] (__irq_svc+0x44/0x5c) [ 8864.977097] Exception stack(0xbe07bde8 to 0xbe07be30) [ 8864.982173] bde0: 00000001 00000001 00000000 00000000 be7c1680 00000000 [ 8864.990377] be00: be0cfe00 bd93eb40 00000002 00000000 00000000 be07be44 be07be00 be07be30 [ 8864.998573] be20: 8006278c 806f2934 20000013 ffffffff [ 8865.003638] r7:be07be1c r6:ffffffff r5:20000013 r4:806f2934 [ 8865.009447] [<806f2904>] (_raw_spin_unlock_irq) from [<80049cfc>] (finish_task_switch+0xa0/0x160) [ 8865.018334] r4:be7c1680 r3:be069380 [ 8865.021993] [<80049c5c>] (finish_task_switch) from [<806ed614>] (__schedule+0x1e0/0x5dc) [ 8865.030098] r8:be0cfe00 r7:bd23b600 r6:be069380 r5:be3289c0 r4:be7c1680 [ 8865.036942] [<806ed434>] (__schedule) from [<806edd0c>] (preempt_schedule_common+0x28/0x44) [ 8865.045307] r9:00000000 r8:809d4598 r7:00000001 r6:00000000 r5:be035740 r4:be07a000 [ 8865.053197] [<806edce4>] (preempt_schedule_common) from [<806edd68>] (_cond_resched+0x40/0x48) [ 8865.061822] r4:be07a000 r3:be07a000 [ 8865.065472] [<806edd28>] (_cond_resched) from [<8002e860>] (run_ksoftirqd+0x44/0x64) [ 8865.073252] [<8002e81c>] (run_ksoftirqd) from [<800494b0>] (smpboot_thread_fn+0x124/0x190) [ 8865.081550] [<8004938c>] (smpboot_thread_fn) from [<80045928>] (kthread+0xdc/0xf8) [ 8865.089133] r10:00000000 r9:00000000 r8:00000000 r7:8004938c r6:be035740 r5:be035780 [ 8865.097097] r4:00000000 r3:be069380 [ 8865.100752] [<8004584c>] (kthread) from [<8000ed10>] (ret_from_fork+0x14/0x24) [ 8865.107990] r7:00000000 r6:00000000 r5:8004584c r4:be035780 [ 8865.113767] Code: e320f000 e4913004 e4914004 e4915004 (e4916004) [ 8865.120006] ---[ end trace b0a4c6bd499288ca ]--- [ 8865.124697] Kernel panic - not syncing: Fatal exception in interrupt [ 8865.131084] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Cc: [v3.19+] stable@vger.kernel.org Tested-by: Peter Chen Signed-off-by: Peter Chen Signed-off-by: Fugang Duan Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 9bb6220663b2..5ff8fee3850f 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -1597,7 +1597,7 @@ fec_enet_interrupt(int irq, void *dev_id) writel(int_events, fep->hwp + FEC_IEVENT); fec_enet_collect_events(fep, int_events); - if (fep->work_tx || fep->work_rx) { + if ((fep->work_tx || fep->work_rx) && fep->link) { ret = IRQ_HANDLED; if (napi_schedule_prep(&fep->napi)) { -- cgit v1.2.1 From 04b91701d471fbc09689b96d2e7c94ee3a0fff74 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 4 Mar 2015 23:39:18 +0100 Subject: ARM: fix typos in smc91x platform data I recently did a rework of the smc91x driver and did some build-testing by compiling hundreds of randconfig kernels. Unfortunately, my script was wrong and did not actually test the configurations that mattered, so I introduced stupid typos in almost every file I touched. I fixed my script now, built all configurations that actually matter and fixed all the typos, this is the result. Signed-off-by: Arnd Bergmann Fixes: b70661c70830d ("net: smc91x: use run-time configuration on all ARM machines") Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smc91x.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c index 209ee1b27f8d..5d093dc0f5f5 100644 --- a/drivers/net/ethernet/smsc/smc91x.c +++ b/drivers/net/ethernet/smsc/smc91x.c @@ -92,6 +92,7 @@ static const char version[] = #include "smc91x.h" #if defined(CONFIG_ASSABET_NEPONSET) +#include #include #endif -- cgit v1.2.1 From da293700568ed3d96fcf062ac15d7d7c41377f11 Mon Sep 17 00:00:00 2001 From: Brian King Date: Wed, 4 Mar 2015 08:09:44 -0600 Subject: bnx2x: Force fundamental reset for EEH recovery EEH recovery for bnx2x based adapters is not reliable on all Power systems using the default hot reset, which can result in an unrecoverable EEH error. Forcing the use of fundamental reset during EEH recovery fixes this. Cc: stable Signed-off-by: Brian King Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 7155e1d2c208..bef750a09027 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -12722,6 +12722,9 @@ static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev, pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, PCICFG_VENDOR_ID_OFFSET); + /* Set PCIe reset type to fundamental for EEH recovery */ + pdev->needs_freset = 1; + /* AER (Advanced Error reporting) configuration */ rc = pci_enable_pcie_error_reporting(pdev); if (!rc) -- cgit v1.2.1 From b0ab0afaebc88158c02755d2d9a09f1406c82406 Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Wed, 4 Mar 2015 11:51:57 -0500 Subject: net: eth: xgene: fix booting with devicetree Commit de7b5b3d790a ("net: eth: xgene: change APM X-Gene SoC platform ethernet to support ACPI") breaks booting with devicetree with UEFI firmware. In that case, I get: Unhandled fault: synchronous external abort (0x96000010) at 0xfffffc0000620010 Internal error: : 96000010 [#1] SMP Modules linked in: vfat fat xfs libcrc32c ahci_xgene libahci_platform libahci CPU: 7 PID: 634 Comm: NetworkManager Not tainted 4.0.0-rc1+ #4 Hardware name: AppliedMicro Mustang/Mustang, BIOS 1.1.0-rh-0.14 Mar 1 2015 task: fffffe03d4c7e100 ti: fffffe03d4e24000 task.ti: fffffe03d4e24000 PC is at xgene_enet_rd_mcx_mac.isra.11+0x58/0xd4 LR is at xgene_gmac_tx_enable+0x2c/0x50 pc : [] lr : [] pstate: 80000145 sp : fffffe03d4e27590 x29: fffffe03d4e27590 x28: 0000000000000000 x27: fffffe03d4e277c0 x26: fffffe03da8fda10 x25: fffffe03d4e2760c x24: fffffe03d49e28c0 x23: fffffc0000620004 x22: 0000000000000000 x21: fffffc0000620000 x20: fffffc0000620010 x19: 000000000000000b x18: 000003ffd4a96020 x17: 000003ff7fc1f7a0 x16: fffffe000079b9cc x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: fffffe03d4e24000 x11: fffffe03d4e27da0 x10: 0000000000000001 x9 : 0000000000000000 x8 : fffffe03d4e27a20 x7 : 0000000000000000 x6 : 00000000ffffffef x5 : fffffe000105f7d0 x4 : fffffe00007ca8c8 x3 : fffffe03d4e2760c x2 : 0000000000000000 x1 : fffffc0000620000 x0 : 0000000040000000 Process NetworkManager (pid: 634, stack limit = 0xfffffe03d4e24028) Stack: (0xfffffe03d4e27590 to 0xfffffe03d4e28000) ... Call trace: [] xgene_enet_rd_mcx_mac.isra.11+0x58/0xd4 [] xgene_gmac_tx_enable+0x28/0x50 [] xgene_enet_open+0x2c/0x130 [] __dev_open+0xc8/0x148 [] __dev_change_flags+0x90/0x158 [] dev_change_flags+0x30/0x70 [] do_setlink+0x278/0x870 [] rtnl_newlink+0x404/0x6a8 [] rtnetlink_rcv_msg+0x98/0x218 [] netlink_rcv_skb+0xe0/0xf8 [] rtnetlink_rcv+0x30/0x44 [] netlink_unicast+0xfc/0x210 [] netlink_sendmsg+0x498/0x5ac [] do_sock_sendmsg+0xa4/0xcc [] ___sys_sendmsg+0x1fc/0x208 [] __sys_sendmsg+0x4c/0x94 [] SyS_sendmsg+0x2c/0x3c The problem here is that the enet hw clocks are not getting initialized because of a test to avoid the initialization if UEFI is used to boot. This is an incorrect test. When booting with UEFI and devicetree, the kernel must still initialize the enet hw clocks. If booting with ACPI, the clock hw is not exposed to the kernel and it is that case where we want to avoid initializing clocks. Signed-off-by: Mark Salter Acked-by: Feng Kan Signed-off-by: David S. Miller --- drivers/net/ethernet/apm/xgene/xgene_enet_hw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c index 869d97fcf781..b927021c6c40 100644 --- a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c @@ -593,7 +593,7 @@ static int xgene_enet_reset(struct xgene_enet_pdata *pdata) if (!xgene_ring_mgr_init(pdata)) return -ENODEV; - if (!efi_enabled(EFI_BOOT)) { + if (pdata->clk) { clk_prepare_enable(pdata->clk); clk_disable_unprepare(pdata->clk); clk_prepare_enable(pdata->clk); -- cgit v1.2.1 From 386668a61f90412a61a12719d15dfec58d0ece1c Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 4 Mar 2015 11:43:03 -0800 Subject: net: bcmgenet: properly disable password matching bcmgenet_set_wol() correctly sets MPD_PW_EN when a password is specified to match magic packets against, however, when we switch from a password-matching to a matching without password we would leave this bit turned on, and GENET would only match magic packets with passwords. This can be reproduced using the following sequence: ethtool -s eth0 wol g ethtool -s eth0 wol s sopass 00:11:22:33:44:55 ethtool -s eth0 wol g The simple fix is to clear the MPD_PWD_EN bit when WAKE_MAGICSECURE is not set. Fixes: c51de7f3976b ("net: bcmgenet: add Wake-on-LAN support code") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c index 149a0d70c108..b97122926d3a 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c @@ -73,15 +73,17 @@ int bcmgenet_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) if (wol->wolopts & ~(WAKE_MAGIC | WAKE_MAGICSECURE)) return -EINVAL; + reg = bcmgenet_umac_readl(priv, UMAC_MPD_CTRL); if (wol->wolopts & WAKE_MAGICSECURE) { bcmgenet_umac_writel(priv, get_unaligned_be16(&wol->sopass[0]), UMAC_MPD_PW_MS); bcmgenet_umac_writel(priv, get_unaligned_be32(&wol->sopass[2]), UMAC_MPD_PW_LS); - reg = bcmgenet_umac_readl(priv, UMAC_MPD_CTRL); reg |= MPD_PW_EN; - bcmgenet_umac_writel(priv, reg, UMAC_MPD_CTRL); + } else { + reg &= ~MPD_PW_EN; } + bcmgenet_umac_writel(priv, reg, UMAC_MPD_CTRL); /* Flag the device and relevant IRQ as wakeup capable */ if (wol->wolopts) { -- cgit v1.2.1 From f50724cdfeea37ddbd969e1445be7c85329d7d09 Mon Sep 17 00:00:00 2001 From: Tobias Waldekranz Date: Thu, 5 Mar 2015 14:48:23 +0100 Subject: net: gianfar: correctly determine the number of queue groups eTSEC of-nodes may have children which are not queue-group nodes. For example new-style fixed-phy declarations. These where incorrectly assumed to be additional queue-groups. Change the search to filter out any nodes which are not queue-groups, or have been disabled. Signed-off-by: Tobias Waldekranz Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/gianfar.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 178e54028d10..7bf3682cdf47 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -747,6 +747,18 @@ static int gfar_parse_group(struct device_node *np, return 0; } +static int gfar_of_group_count(struct device_node *np) +{ + struct device_node *child; + int num = 0; + + for_each_available_child_of_node(np, child) + if (!of_node_cmp(child->name, "queue-group")) + num++; + + return num; +} + static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev) { const char *model; @@ -784,7 +796,7 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev) num_rx_qs = 1; } else { /* MQ_MG_MODE */ /* get the actual number of supported groups */ - unsigned int num_grps = of_get_available_child_count(np); + unsigned int num_grps = gfar_of_group_count(np); if (num_grps == 0 || num_grps > MAXGROUPS) { dev_err(&ofdev->dev, "Invalid # of int groups(%d)\n", @@ -851,7 +863,10 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev) /* Parse and initialize group specific information */ if (priv->mode == MQ_MG_MODE) { - for_each_child_of_node(np, child) { + for_each_available_child_of_node(np, child) { + if (of_node_cmp(child->name, "queue-group")) + continue; + err = gfar_parse_group(child, priv, model); if (err) goto err_grp_init; -- cgit v1.2.1 From d941bebf5e89478f480038ea30d194537eb64311 Mon Sep 17 00:00:00 2001 From: Punnaiah Choudary Kalluri Date: Thu, 5 Mar 2015 15:02:10 +0100 Subject: net: macb: Correct the MID field length value The latest spec "I-IPA01-0266-USR Rev 10" limit the MID field length to 12 bit value. For previous versions it is 16 bit value. This change will not break the backward compatibility as the latest ID value is 7 and with in the 12 bit value limit. Signed-off-by: Punnaiah Choudary Kalluri Signed-off-by: Michal Simek Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h index 31dc080f2437..ff85619a9732 100644 --- a/drivers/net/ethernet/cadence/macb.h +++ b/drivers/net/ethernet/cadence/macb.h @@ -351,7 +351,7 @@ /* Bitfields in MID */ #define MACB_IDNUM_OFFSET 16 -#define MACB_IDNUM_SIZE 16 +#define MACB_IDNUM_SIZE 12 #define MACB_REV_OFFSET 0 #define MACB_REV_SIZE 16 -- cgit v1.2.1 From e9647d1e74a9778539ad3232e58833210c1935f5 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Thu, 5 Mar 2015 15:09:29 +0100 Subject: net: fec: fix unbalanced clk disable on driver unbind When the driver is removed (e.g. using unbind through sysfs), the clocks get disabled twice, once on fec_enet_close and once on fec_drv_remove. Since the clocks are enabled only once, this leads to a warning: WARNING: CPU: 0 PID: 402 at drivers/clk/clk.c:992 clk_core_disable+0x64/0x68() Remove the call to fec_enet_clk_enable in fec_drv_remove to balance the clock enable/disable calls again. This has been introduce by e8fcfcd5684a ("net: fec: optimize the clock management to save power"). Signed-off-by: Stefan Agner Acked-by: Fugang Duan Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 5ff8fee3850f..99492b7e3713 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -3383,7 +3383,6 @@ fec_drv_remove(struct platform_device *pdev) regulator_disable(fep->reg_phy); if (fep->ptp_clock) ptp_clock_unregister(fep->ptp_clock); - fec_enet_clk_enable(ndev, false); of_node_put(fep->phy_node); free_netdev(ndev); -- cgit v1.2.1 From 8edfe3b6fad28da191c8fa15e4e0d8f7335a0091 Mon Sep 17 00:00:00 2001 From: Peter Senna Tschudin Date: Sat, 7 Mar 2015 12:10:26 +0100 Subject: bgmac: Clean warning messages MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On my test environment the throughput of a file transfer drops from 4.4MBps to 116KBps due the number of repeated warning messages. This patch removes the warning messages as DMA works correctly with addresses using 0xC0000000 bits. Signed-off-by: Peter Senna Tschudin Acked-by: Rafał Miłecki Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bgmac.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c index 676ffe093180..0469f72c6e7e 100644 --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -302,9 +302,6 @@ static int bgmac_dma_rx_skb_for_slot(struct bgmac *bgmac, slot->skb = skb; slot->dma_addr = dma_addr; - if (slot->dma_addr & 0xC0000000) - bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n"); - return 0; } @@ -505,8 +502,6 @@ static int bgmac_dma_alloc(struct bgmac *bgmac) ring->mmio_base); goto err_dma_free; } - if (ring->dma_base & 0xC0000000) - bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n"); ring->unaligned = bgmac_dma_unaligned(bgmac, ring, BGMAC_DMA_RING_TX); @@ -536,8 +531,6 @@ static int bgmac_dma_alloc(struct bgmac *bgmac) err = -ENOMEM; goto err_dma_free; } - if (ring->dma_base & 0xC0000000) - bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n"); ring->unaligned = bgmac_dma_unaligned(bgmac, ring, BGMAC_DMA_RING_RX); -- cgit v1.2.1 From 0b2eb3e9bc738c23784b9281dd035ee0b450d98a Mon Sep 17 00:00:00 2001 From: Josh Cartwright Date: Mon, 9 Mar 2015 11:14:39 -0500 Subject: net: macb: constify macb configuration data The configurations are not modified by the driver. Make them 'const' so that they may be placed in a read-only section. Signed-off-by: Josh Cartwright Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index ad76b8e35a00..81d41539fcba 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -2113,17 +2113,17 @@ static const struct net_device_ops macb_netdev_ops = { }; #if defined(CONFIG_OF) -static struct macb_config pc302gem_config = { +static const struct macb_config pc302gem_config = { .caps = MACB_CAPS_SG_DISABLED | MACB_CAPS_GIGABIT_MODE_AVAILABLE, .dma_burst_length = 16, }; -static struct macb_config sama5d3_config = { +static const struct macb_config sama5d3_config = { .caps = MACB_CAPS_SG_DISABLED | MACB_CAPS_GIGABIT_MODE_AVAILABLE, .dma_burst_length = 16, }; -static struct macb_config sama5d4_config = { +static const struct macb_config sama5d4_config = { .caps = 0, .dma_burst_length = 4, }; @@ -2154,7 +2154,7 @@ static void macb_configure_caps(struct macb *bp) if (bp->pdev->dev.of_node) { match = of_match_node(macb_dt_ids, bp->pdev->dev.of_node); if (match && match->data) { - config = (const struct macb_config *)match->data; + config = match->data; bp->caps = config->caps; /* -- cgit v1.2.1