From 5371bbf4b295eea334ed453efa286afa2c3ccff3 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 15 Mar 2017 12:57:21 -0700 Subject: net: bcmgenet: Do not suspend PHY if Wake-on-LAN is enabled Suspending the PHY would be putting it in a low power state where it may no longer allow us to do Wake-on-LAN. Fixes: cc013fb48898 ("net: bcmgenet: correctly suspend and resume PHY device") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index 69015fa50f20..365895ed3c3e 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -3481,7 +3481,8 @@ static int bcmgenet_suspend(struct device *d) bcmgenet_netif_stop(dev); - phy_suspend(priv->phydev); + if (!device_may_wakeup(d)) + phy_suspend(priv->phydev); netif_device_detach(dev); @@ -3578,7 +3579,8 @@ static int bcmgenet_resume(struct device *d) netif_device_attach(dev); - phy_resume(priv->phydev); + if (!device_may_wakeup(d)) + phy_resume(priv->phydev); if (priv->eee.eee_enabled) bcmgenet_eee_enable_set(dev, true); -- cgit v1.2.1 From 622c36f143fc9566ba49d7cec994c2da1182d9e2 Mon Sep 17 00:00:00 2001 From: "Lendacky, Thomas" Date: Wed, 15 Mar 2017 15:11:23 -0500 Subject: amd-xgbe: Fix jumbo MTU processing on newer hardware Newer hardware does not provide a cumulative payload length when multiple descriptors are needed to handle the data. Once the MTU increases beyond the size that can be handled by a single descriptor, the SKB does not get built properly by the driver. The driver will now calculate the size of the data buffers used by the hardware. The first buffer of the first descriptor is for packet headers or packet headers and data when the headers can't be split. Subsequent descriptors in a multi-descriptor chain will not use the first buffer. The second buffer is used by all the descriptors in the chain for payload data. Based on whether the driver is processing the first, intermediate, or last descriptor it can calculate the buffer usage and build the SKB properly. Tested and verified on both old and new hardware. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/xgbe/xgbe-common.h | 6 +- drivers/net/ethernet/amd/xgbe/xgbe-dev.c | 20 +++--- drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 102 +++++++++++++++++----------- 3 files changed, 78 insertions(+), 50 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-common.h b/drivers/net/ethernet/amd/xgbe/xgbe-common.h index 8a280e7d66bd..86f1626816ff 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-common.h +++ b/drivers/net/ethernet/amd/xgbe/xgbe-common.h @@ -1148,8 +1148,8 @@ #define RX_PACKET_ATTRIBUTES_CSUM_DONE_WIDTH 1 #define RX_PACKET_ATTRIBUTES_VLAN_CTAG_INDEX 1 #define RX_PACKET_ATTRIBUTES_VLAN_CTAG_WIDTH 1 -#define RX_PACKET_ATTRIBUTES_INCOMPLETE_INDEX 2 -#define RX_PACKET_ATTRIBUTES_INCOMPLETE_WIDTH 1 +#define RX_PACKET_ATTRIBUTES_LAST_INDEX 2 +#define RX_PACKET_ATTRIBUTES_LAST_WIDTH 1 #define RX_PACKET_ATTRIBUTES_CONTEXT_NEXT_INDEX 3 #define RX_PACKET_ATTRIBUTES_CONTEXT_NEXT_WIDTH 1 #define RX_PACKET_ATTRIBUTES_CONTEXT_INDEX 4 @@ -1158,6 +1158,8 @@ #define RX_PACKET_ATTRIBUTES_RX_TSTAMP_WIDTH 1 #define RX_PACKET_ATTRIBUTES_RSS_HASH_INDEX 6 #define RX_PACKET_ATTRIBUTES_RSS_HASH_WIDTH 1 +#define RX_PACKET_ATTRIBUTES_FIRST_INDEX 7 +#define RX_PACKET_ATTRIBUTES_FIRST_WIDTH 1 #define RX_NORMAL_DESC0_OVT_INDEX 0 #define RX_NORMAL_DESC0_OVT_WIDTH 16 diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c index 937f37a5dcb2..24a687ce4388 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c @@ -1896,10 +1896,15 @@ static int xgbe_dev_read(struct xgbe_channel *channel) /* Get the header length */ if (XGMAC_GET_BITS_LE(rdesc->desc3, RX_NORMAL_DESC3, FD)) { + XGMAC_SET_BITS(packet->attributes, RX_PACKET_ATTRIBUTES, + FIRST, 1); rdata->rx.hdr_len = XGMAC_GET_BITS_LE(rdesc->desc2, RX_NORMAL_DESC2, HL); if (rdata->rx.hdr_len) pdata->ext_stats.rx_split_header_packets++; + } else { + XGMAC_SET_BITS(packet->attributes, RX_PACKET_ATTRIBUTES, + FIRST, 0); } /* Get the RSS hash */ @@ -1922,19 +1927,16 @@ static int xgbe_dev_read(struct xgbe_channel *channel) } } - /* Get the packet length */ - rdata->rx.len = XGMAC_GET_BITS_LE(rdesc->desc3, RX_NORMAL_DESC3, PL); - - if (!XGMAC_GET_BITS_LE(rdesc->desc3, RX_NORMAL_DESC3, LD)) { - /* Not all the data has been transferred for this packet */ - XGMAC_SET_BITS(packet->attributes, RX_PACKET_ATTRIBUTES, - INCOMPLETE, 1); + /* Not all the data has been transferred for this packet */ + if (!XGMAC_GET_BITS_LE(rdesc->desc3, RX_NORMAL_DESC3, LD)) return 0; - } /* This is the last of the data for this packet */ XGMAC_SET_BITS(packet->attributes, RX_PACKET_ATTRIBUTES, - INCOMPLETE, 0); + LAST, 1); + + /* Get the packet length */ + rdata->rx.len = XGMAC_GET_BITS_LE(rdesc->desc3, RX_NORMAL_DESC3, PL); /* Set checksum done indicator as appropriate */ if (netdev->features & NETIF_F_RXCSUM) diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c index ffea9859f5a7..a713abd9d03e 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c @@ -1971,13 +1971,12 @@ static struct sk_buff *xgbe_create_skb(struct xgbe_prv_data *pdata, { struct sk_buff *skb; u8 *packet; - unsigned int copy_len; skb = napi_alloc_skb(napi, rdata->rx.hdr.dma_len); if (!skb) return NULL; - /* Start with the header buffer which may contain just the header + /* Pull in the header buffer which may contain just the header * or the header plus data */ dma_sync_single_range_for_cpu(pdata->dev, rdata->rx.hdr.dma_base, @@ -1986,30 +1985,49 @@ static struct sk_buff *xgbe_create_skb(struct xgbe_prv_data *pdata, packet = page_address(rdata->rx.hdr.pa.pages) + rdata->rx.hdr.pa.pages_offset; - copy_len = (rdata->rx.hdr_len) ? rdata->rx.hdr_len : len; - copy_len = min(rdata->rx.hdr.dma_len, copy_len); - skb_copy_to_linear_data(skb, packet, copy_len); - skb_put(skb, copy_len); - - len -= copy_len; - if (len) { - /* Add the remaining data as a frag */ - dma_sync_single_range_for_cpu(pdata->dev, - rdata->rx.buf.dma_base, - rdata->rx.buf.dma_off, - rdata->rx.buf.dma_len, - DMA_FROM_DEVICE); - - skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, - rdata->rx.buf.pa.pages, - rdata->rx.buf.pa.pages_offset, - len, rdata->rx.buf.dma_len); - rdata->rx.buf.pa.pages = NULL; - } + skb_copy_to_linear_data(skb, packet, len); + skb_put(skb, len); return skb; } +static unsigned int xgbe_rx_buf1_len(struct xgbe_ring_data *rdata, + struct xgbe_packet_data *packet) +{ + /* Always zero if not the first descriptor */ + if (!XGMAC_GET_BITS(packet->attributes, RX_PACKET_ATTRIBUTES, FIRST)) + return 0; + + /* First descriptor with split header, return header length */ + if (rdata->rx.hdr_len) + return rdata->rx.hdr_len; + + /* First descriptor but not the last descriptor and no split header, + * so the full buffer was used + */ + if (!XGMAC_GET_BITS(packet->attributes, RX_PACKET_ATTRIBUTES, LAST)) + return rdata->rx.hdr.dma_len; + + /* First descriptor and last descriptor and no split header, so + * calculate how much of the buffer was used + */ + return min_t(unsigned int, rdata->rx.hdr.dma_len, rdata->rx.len); +} + +static unsigned int xgbe_rx_buf2_len(struct xgbe_ring_data *rdata, + struct xgbe_packet_data *packet, + unsigned int len) +{ + /* Always the full buffer if not the last descriptor */ + if (!XGMAC_GET_BITS(packet->attributes, RX_PACKET_ATTRIBUTES, LAST)) + return rdata->rx.buf.dma_len; + + /* Last descriptor so calculate how much of the buffer was used + * for the last bit of data + */ + return rdata->rx.len - len; +} + static int xgbe_tx_poll(struct xgbe_channel *channel) { struct xgbe_prv_data *pdata = channel->pdata; @@ -2092,8 +2110,8 @@ static int xgbe_rx_poll(struct xgbe_channel *channel, int budget) struct napi_struct *napi; struct sk_buff *skb; struct skb_shared_hwtstamps *hwtstamps; - unsigned int incomplete, error, context_next, context; - unsigned int len, rdesc_len, max_len; + unsigned int last, error, context_next, context; + unsigned int len, buf1_len, buf2_len, max_len; unsigned int received = 0; int packet_count = 0; @@ -2103,7 +2121,7 @@ static int xgbe_rx_poll(struct xgbe_channel *channel, int budget) if (!ring) return 0; - incomplete = 0; + last = 0; context_next = 0; napi = (pdata->per_channel_irq) ? &channel->napi : &pdata->napi; @@ -2137,9 +2155,8 @@ read_again: received++; ring->cur++; - incomplete = XGMAC_GET_BITS(packet->attributes, - RX_PACKET_ATTRIBUTES, - INCOMPLETE); + last = XGMAC_GET_BITS(packet->attributes, RX_PACKET_ATTRIBUTES, + LAST); context_next = XGMAC_GET_BITS(packet->attributes, RX_PACKET_ATTRIBUTES, CONTEXT_NEXT); @@ -2148,7 +2165,7 @@ read_again: CONTEXT); /* Earlier error, just drain the remaining data */ - if ((incomplete || context_next) && error) + if ((!last || context_next) && error) goto read_again; if (error || packet->errors) { @@ -2160,16 +2177,22 @@ read_again: } if (!context) { - /* Length is cumulative, get this descriptor's length */ - rdesc_len = rdata->rx.len - len; - len += rdesc_len; + /* Get the data length in the descriptor buffers */ + buf1_len = xgbe_rx_buf1_len(rdata, packet); + len += buf1_len; + buf2_len = xgbe_rx_buf2_len(rdata, packet, len); + len += buf2_len; - if (rdesc_len && !skb) { + if (!skb) { skb = xgbe_create_skb(pdata, napi, rdata, - rdesc_len); - if (!skb) + buf1_len); + if (!skb) { error = 1; - } else if (rdesc_len) { + goto skip_data; + } + } + + if (buf2_len) { dma_sync_single_range_for_cpu(pdata->dev, rdata->rx.buf.dma_base, rdata->rx.buf.dma_off, @@ -2179,13 +2202,14 @@ read_again: skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, rdata->rx.buf.pa.pages, rdata->rx.buf.pa.pages_offset, - rdesc_len, + buf2_len, rdata->rx.buf.dma_len); rdata->rx.buf.pa.pages = NULL; } } - if (incomplete || context_next) +skip_data: + if (!last || context_next) goto read_again; if (!skb) @@ -2243,7 +2267,7 @@ next_packet: } /* Check if we need to save state before leaving */ - if (received && (incomplete || context_next)) { + if (received && (!last || context_next)) { rdata = XGBE_GET_DESC_DATA(ring, ring->cur); rdata->state_saved = 1; rdata->state.skb = skb; -- cgit v1.2.1 From 4cbe4dac82e423ecc9a0ba46af24a860853259f4 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Mon, 13 Mar 2017 19:29:08 +0200 Subject: net/mlx4_core: Avoid delays during VF driver device shutdown Some Hypervisors detach VFs from VMs by instantly causing an FLR event to be generated for a VF. In the mlx4 case, this will cause that VF's comm channel to be disabled before the VM has an opportunity to invoke the VF device's "shutdown" method. For such Hypervisors, there is a race condition between the VF's shutdown method and its internal-error detection/reset thread. The internal-error detection/reset thread (which runs every 5 seconds) also detects a disabled comm channel. If the internal-error detection/reset flow wins the race, we still get delays (while that flow tries repeatedly to detect comm-channel recovery). The cited commit fixed the command timeout problem when the internal-error detection/reset flow loses the race. This commit avoids the unneeded delays when the internal-error detection/reset flow wins. Fixes: d585df1c5ccf ("net/mlx4_core: Avoid command timeouts during VF driver device shutdown") Signed-off-by: Jack Morgenstein Reported-by: Simon Xiao Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/cmd.c | 11 +++++++++++ drivers/net/ethernet/mellanox/mlx4/main.c | 11 +++++++++++ 2 files changed, 22 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c index e8c105164931..0e0fa7030565 100644 --- a/drivers/net/ethernet/mellanox/mlx4/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c @@ -2305,6 +2305,17 @@ static int sync_toggles(struct mlx4_dev *dev) rd_toggle = swab32(readl(&priv->mfunc.comm->slave_read)); if (wr_toggle == 0xffffffff || rd_toggle == 0xffffffff) { /* PCI might be offline */ + + /* If device removal has been requested, + * do not continue retrying. + */ + if (dev->persist->interface_state & + MLX4_INTERFACE_STATE_NOWAIT) { + mlx4_warn(dev, + "communication channel is offline\n"); + return -EIO; + } + msleep(100); wr_toggle = swab32(readl(&priv->mfunc.comm-> slave_write)); diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 21377c315083..703205475524 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -1940,6 +1940,14 @@ static int mlx4_comm_check_offline(struct mlx4_dev *dev) (u32)(1 << COMM_CHAN_OFFLINE_OFFSET)); if (!offline_bit) return 0; + + /* If device removal has been requested, + * do not continue retrying. + */ + if (dev->persist->interface_state & + MLX4_INTERFACE_STATE_NOWAIT) + break; + /* There are cases as part of AER/Reset flow that PF needs * around 100 msec to load. We therefore sleep for 100 msec * to allow other tasks to make use of that CPU during this @@ -3955,6 +3963,9 @@ static void mlx4_remove_one(struct pci_dev *pdev) struct devlink *devlink = priv_to_devlink(priv); int active_vfs = 0; + if (mlx4_is_slave(dev)) + persist->interface_state |= MLX4_INTERFACE_STATE_NOWAIT; + mutex_lock(&persist->interface_state_mutex); persist->interface_state |= MLX4_INTERFACE_STATE_DELETION; mutex_unlock(&persist->interface_state_mutex); -- cgit v1.2.1 From bc9ab9231ec8c08352ea860480523d88a221a68f Mon Sep 17 00:00:00 2001 From: David Arcari Date: Mon, 13 Mar 2017 19:07:16 -0400 Subject: net: ethernet: aquantia: set net_device mtu when mtu is changed When the aquantia device mtu is changed the net_device structure is not updated. As a result the ip command does not properly reflect the mtu change. Commit 5513e16421cb incorrectly assumed that __dev_set_mtu() was making the assignment ndev->mtu = new_mtu; This is not true in the case where the driver has a ndo_change_mtu routine. Fixes: 5513e16421cb ("net: ethernet: aquantia: Fixes for aq_ndev_change_mtu") Cc: Pavel Belous Signed-off-by: David Arcari Tested-by: Pavel Belous Reviewed-by: Jarod Wilson Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_main.c b/drivers/net/ethernet/aquantia/atlantic/aq_main.c index dad63623be6a..d05fbfdce5e5 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_main.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_main.c @@ -98,6 +98,7 @@ static int aq_ndev_change_mtu(struct net_device *ndev, int new_mtu) if (err < 0) goto err_exit; + ndev->mtu = new_mtu; if (netif_running(ndev)) { aq_ndev_close(ndev); -- cgit v1.2.1 From 9501df3cd9204f5859f649182431616a31ee88a1 Mon Sep 17 00:00:00 2001 From: Nathan Fontenot Date: Wed, 15 Mar 2017 23:38:07 -0400 Subject: ibmvnic: Free tx/rx scrq pointer array when releasing sub-crqs The pointer array for the tx/rx sub crqs should be free'ed when releasing the tx/rx sub crqs. Signed-off-by: Nathan Fontenot Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 5f11b4dc95d2..b23d6545f835 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -1257,6 +1257,7 @@ static void release_sub_crqs(struct ibmvnic_adapter *adapter) release_sub_crq_queue(adapter, adapter->tx_scrq[i]); } + kfree(adapter->tx_scrq); adapter->tx_scrq = NULL; } @@ -1269,6 +1270,7 @@ static void release_sub_crqs(struct ibmvnic_adapter *adapter) release_sub_crq_queue(adapter, adapter->rx_scrq[i]); } + kfree(adapter->rx_scrq); adapter->rx_scrq = NULL; } } -- cgit v1.2.1 From 13e2d5187f6b965ba3556caedb914baf81b98ed2 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 17 Mar 2017 23:52:35 +0300 Subject: bna: integer overflow bug in debugfs We could allocate less memory than intended because we do: bnad->regdata = kzalloc(len << 2, GFP_KERNEL); The shift can overflow leading to a crash. This is debugfs code so the impact is very small. Fixes: 7afc5dbde091 ("bna: Add debugfs interface.") Signed-off-by: Dan Carpenter Acked-by: Rasesh Mody Signed-off-by: David S. Miller --- drivers/net/ethernet/brocade/bna/bnad_debugfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/brocade/bna/bnad_debugfs.c b/drivers/net/ethernet/brocade/bna/bnad_debugfs.c index 05c1c1dd7751..cebfe3bd086e 100644 --- a/drivers/net/ethernet/brocade/bna/bnad_debugfs.c +++ b/drivers/net/ethernet/brocade/bna/bnad_debugfs.c @@ -325,7 +325,7 @@ bnad_debugfs_write_regrd(struct file *file, const char __user *buf, return PTR_ERR(kern_buf); rc = sscanf(kern_buf, "%x:%x", &addr, &len); - if (rc < 2) { + if (rc < 2 || len > UINT_MAX >> 2) { netdev_warn(bnad->netdev, "failed to read user buffer\n"); kfree(kern_buf); return -EINVAL; -- cgit v1.2.1 From be9ca0d33c850192198c22518eeb1f41401268e8 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 20 Mar 2017 09:52:50 +0100 Subject: cpsw/netcp: work around reverse cpts dependency The dependency is reversed: cpsw and netcp call into cpts, but cpts depends on the other two in Kconfig. This can lead to cpts being a loadable module and its callers built-in: drivers/net/ethernet/ti/cpsw.o: In function `cpsw_remove': cpsw.c:(.text.cpsw_remove+0xd0): undefined reference to `cpts_release' drivers/net/ethernet/ti/cpsw.o: In function `cpsw_rx_handler': cpsw.c:(.text.cpsw_rx_handler+0x2dc): undefined reference to `cpts_rx_timestamp' drivers/net/ethernet/ti/cpsw.o: In function `cpsw_tx_handler': cpsw.c:(.text.cpsw_tx_handler+0x7c): undefined reference to `cpts_tx_timestamp' drivers/net/ethernet/ti/cpsw.o: In function `cpsw_ndo_stop': As a workaround, I'm introducing another Kconfig symbol to control the compilation of cpts, while making the actual module controlled by a silent symbol that is =y when necessary. Fixes: 6246168b4a38 ("net: ethernet: ti: netcp: add support of cpts") Signed-off-by: Arnd Bergmann Reviewed-by: Grygorii Strashko Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/Kconfig | 8 +++++++- drivers/net/ethernet/ti/Makefile | 2 +- 2 files changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig index 296c8efd0038..d923890a9fda 100644 --- a/drivers/net/ethernet/ti/Kconfig +++ b/drivers/net/ethernet/ti/Kconfig @@ -74,7 +74,7 @@ config TI_CPSW will be called cpsw. config TI_CPTS - tristate "TI Common Platform Time Sync (CPTS) Support" + bool "TI Common Platform Time Sync (CPTS) Support" depends on TI_CPSW || TI_KEYSTONE_NETCP imply PTP_1588_CLOCK ---help--- @@ -83,6 +83,12 @@ config TI_CPTS The unit can time stamp PTP UDP/IPv4 and Layer 2 packets, and the driver offers a PTP Hardware Clock. +config TI_CPTS_MOD + tristate + depends on TI_CPTS + default y if TI_CPSW=y || TI_KEYSTONE_NETCP=y + default m + config TI_KEYSTONE_NETCP tristate "TI Keystone NETCP Core Support" select TI_CPSW_ALE diff --git a/drivers/net/ethernet/ti/Makefile b/drivers/net/ethernet/ti/Makefile index 1e7c10bf8713..10e6b0ce51ba 100644 --- a/drivers/net/ethernet/ti/Makefile +++ b/drivers/net/ethernet/ti/Makefile @@ -12,7 +12,7 @@ obj-$(CONFIG_TI_DAVINCI_MDIO) += davinci_mdio.o obj-$(CONFIG_TI_DAVINCI_CPDMA) += davinci_cpdma.o obj-$(CONFIG_TI_CPSW_PHY_SEL) += cpsw-phy-sel.o obj-$(CONFIG_TI_CPSW_ALE) += cpsw_ale.o -obj-$(CONFIG_TI_CPTS) += cpts.o +obj-$(CONFIG_TI_CPTS_MOD) += cpts.o obj-$(CONFIG_TI_CPSW) += ti_cpsw.o ti_cpsw-y := cpsw.o -- cgit v1.2.1 From 07fef3623407444e51c12ea57cd91df38c1069e0 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 20 Mar 2017 09:58:33 +0100 Subject: cpsw/netcp: cpts depends on posix_timers With posix timers having become optional, we get a build error with the cpts time sync option of the CPSW driver: drivers/net/ethernet/ti/cpts.c: In function 'cpts_find_ts': drivers/net/ethernet/ti/cpts.c:291:23: error: implicit declaration of function 'ptp_classify_raw';did you mean 'ptp_classifier_init'? [-Werror=implicit-function-declaration] This adds a hard dependency on PTP_CLOCK to avoid the problem, as building it without PTP support makes no sense anyway. Fixes: baa73d9e478f ("posix-timers: Make them configurable") Cc: Nicolas Pitre Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann Acked-by: Nicolas Pitre Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig index d923890a9fda..9e631952b86f 100644 --- a/drivers/net/ethernet/ti/Kconfig +++ b/drivers/net/ethernet/ti/Kconfig @@ -76,7 +76,7 @@ config TI_CPSW config TI_CPTS bool "TI Common Platform Time Sync (CPTS) Support" depends on TI_CPSW || TI_KEYSTONE_NETCP - imply PTP_1588_CLOCK + depends on PTP_1588_CLOCK ---help--- This driver supports the Common Platform Time Sync unit of the CPSW Ethernet Switch and Keystone 2 1g/10g Switch Subsystem. -- cgit v1.2.1 From 1f30a86c58093046dc3e49c23d2618894e098f7a Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Tue, 21 Mar 2017 15:59:12 +0200 Subject: net/mlx5: Add missing entries for set/query rate limit commands The switch cases for the rate limit set and query commands were missing, which could get us wrong under fw error or driver reset flow, fix that. Fixes: 1466cc5b23d1 ('net/mlx5: Rate limit tables support') Signed-off-by: Or Gerlitz Reviewed-by: Hadar Hen Zion Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index caa837e5e2b9..a380353a78c2 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -361,6 +361,8 @@ static int mlx5_internal_err_ret_value(struct mlx5_core_dev *dev, u16 op, case MLX5_CMD_OP_QUERY_VPORT_COUNTER: case MLX5_CMD_OP_ALLOC_Q_COUNTER: case MLX5_CMD_OP_QUERY_Q_COUNTER: + case MLX5_CMD_OP_SET_RATE_LIMIT: + case MLX5_CMD_OP_QUERY_RATE_LIMIT: case MLX5_CMD_OP_ALLOC_PD: case MLX5_CMD_OP_ALLOC_UAR: case MLX5_CMD_OP_CONFIG_INT_MODERATION: @@ -497,6 +499,8 @@ const char *mlx5_command_str(int command) MLX5_COMMAND_STR_CASE(ALLOC_Q_COUNTER); MLX5_COMMAND_STR_CASE(DEALLOC_Q_COUNTER); MLX5_COMMAND_STR_CASE(QUERY_Q_COUNTER); + MLX5_COMMAND_STR_CASE(SET_RATE_LIMIT); + MLX5_COMMAND_STR_CASE(QUERY_RATE_LIMIT); MLX5_COMMAND_STR_CASE(ALLOC_PD); MLX5_COMMAND_STR_CASE(DEALLOC_PD); MLX5_COMMAND_STR_CASE(ALLOC_UAR); -- cgit v1.2.1 From d85cdccbb3fe9a632ec9d0f4e4526c8c84fc3523 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Tue, 21 Mar 2017 15:59:13 +0200 Subject: net/mlx5e: Change the TC offload rule add/del code path to be per NIC or E-Switch Refactor the code to deal with add/del TC rules to have handler per NIC/E-switch offloading use case, and push the latter into the e-switch code. This provides better separation and is to be used in down-stream patch for applying a fix. Fixes: bffaa916588e ("net/mlx5: E-Switch, Add control for inline mode") Signed-off-by: Or Gerlitz Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 59 ++++++++++++++-------- drivers/net/ethernet/mellanox/mlx5/core/eswitch.h | 5 ++ .../ethernet/mellanox/mlx5/core/eswitch_offloads.c | 14 +++++ 3 files changed, 58 insertions(+), 20 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index 79481f4cf264..2825b5665456 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -133,6 +133,23 @@ err_create_ft: return rule; } +static void mlx5e_tc_del_nic_flow(struct mlx5e_priv *priv, + struct mlx5e_tc_flow *flow) +{ + struct mlx5_fc *counter = NULL; + + if (!IS_ERR(flow->rule)) { + counter = mlx5_flow_rule_counter(flow->rule); + mlx5_del_flow_rules(flow->rule); + mlx5_fc_destroy(priv->mdev, counter); + } + + if (!mlx5e_tc_num_filters(priv) && (priv->fs.tc.t)) { + mlx5_destroy_flow_table(priv->fs.tc.t); + priv->fs.tc.t = NULL; + } +} + static struct mlx5_flow_handle * mlx5e_tc_add_fdb_flow(struct mlx5e_priv *priv, struct mlx5_flow_spec *spec, @@ -149,7 +166,24 @@ mlx5e_tc_add_fdb_flow(struct mlx5e_priv *priv, } static void mlx5e_detach_encap(struct mlx5e_priv *priv, - struct mlx5e_tc_flow *flow) { + struct mlx5e_tc_flow *flow); + +static void mlx5e_tc_del_fdb_flow(struct mlx5e_priv *priv, + struct mlx5e_tc_flow *flow) +{ + struct mlx5_eswitch *esw = priv->mdev->priv.eswitch; + + mlx5_eswitch_del_offloaded_rule(esw, flow->rule, flow->attr); + + mlx5_eswitch_del_vlan_action(esw, flow->attr); + + if (flow->attr->action & MLX5_FLOW_CONTEXT_ACTION_ENCAP) + mlx5e_detach_encap(priv, flow); +} + +static void mlx5e_detach_encap(struct mlx5e_priv *priv, + struct mlx5e_tc_flow *flow) +{ struct list_head *next = flow->encap.next; list_del(&flow->encap); @@ -173,25 +207,10 @@ static void mlx5e_detach_encap(struct mlx5e_priv *priv, static void mlx5e_tc_del_flow(struct mlx5e_priv *priv, struct mlx5e_tc_flow *flow) { - struct mlx5_eswitch *esw = priv->mdev->priv.eswitch; - struct mlx5_fc *counter = NULL; - - if (!IS_ERR(flow->rule)) { - counter = mlx5_flow_rule_counter(flow->rule); - mlx5_del_flow_rules(flow->rule); - mlx5_fc_destroy(priv->mdev, counter); - } - - if (flow->flags & MLX5E_TC_FLOW_ESWITCH) { - mlx5_eswitch_del_vlan_action(esw, flow->attr); - if (flow->attr->action & MLX5_FLOW_CONTEXT_ACTION_ENCAP) - mlx5e_detach_encap(priv, flow); - } - - if (!mlx5e_tc_num_filters(priv) && (priv->fs.tc.t)) { - mlx5_destroy_flow_table(priv->fs.tc.t); - priv->fs.tc.t = NULL; - } + if (flow->flags & MLX5E_TC_FLOW_ESWITCH) + mlx5e_tc_del_fdb_flow(priv, flow); + else + mlx5e_tc_del_nic_flow(priv, flow); } static void parse_vxlan_attr(struct mlx5_flow_spec *spec, diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h index 5b78883d5654..9227a83a97e3 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h @@ -271,6 +271,11 @@ struct mlx5_flow_handle * mlx5_eswitch_add_offloaded_rule(struct mlx5_eswitch *esw, struct mlx5_flow_spec *spec, struct mlx5_esw_flow_attr *attr); +void +mlx5_eswitch_del_offloaded_rule(struct mlx5_eswitch *esw, + struct mlx5_flow_handle *rule, + struct mlx5_esw_flow_attr *attr); + struct mlx5_flow_handle * mlx5_eswitch_create_vport_rx_rule(struct mlx5_eswitch *esw, int vport, u32 tirn); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c index 4f5b0d47d5f3..bfabefe20ac0 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c @@ -97,6 +97,20 @@ mlx5_eswitch_add_offloaded_rule(struct mlx5_eswitch *esw, return rule; } +void +mlx5_eswitch_del_offloaded_rule(struct mlx5_eswitch *esw, + struct mlx5_flow_handle *rule, + struct mlx5_esw_flow_attr *attr) +{ + struct mlx5_fc *counter = NULL; + + if (!IS_ERR(rule)) { + counter = mlx5_flow_rule_counter(rule); + mlx5_del_flow_rules(rule); + mlx5_fc_destroy(esw->dev, counter); + } +} + static int esw_set_global_vlan_pop(struct mlx5_eswitch *esw, u8 val) { struct mlx5_eswitch_rep *rep; -- cgit v1.2.1 From 375f51e2b5b7b9a42b3139aea519cbb1bfc5d6ef Mon Sep 17 00:00:00 2001 From: Roi Dayan Date: Tue, 21 Mar 2017 15:59:14 +0200 Subject: net/mlx5: E-Switch, Don't allow changing inline mode when flows are configured Changing the eswitch inline mode can potentially cause already configured flows not to match the policy. E.g. set policy L4, add some L4 rules, set policy to L2 --> bad! Hence we disallow it. Keep track of how many offloaded rules are now set and refuse inline mode changes if this isn't zero. Fixes: bffaa916588e ("net/mlx5: E-Switch, Add control for inline mode") Signed-off-by: Roi Dayan Reviewed-by: Or Gerlitz Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/eswitch.h | 1 + drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 8 ++++++++ 2 files changed, 9 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h index 9227a83a97e3..ad329b1680b4 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h @@ -209,6 +209,7 @@ struct mlx5_esw_offload { struct mlx5_eswitch_rep *vport_reps; DECLARE_HASHTABLE(encap_tbl, 8); u8 inline_mode; + u64 num_flows; }; struct mlx5_eswitch { diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c index bfabefe20ac0..307ec6c5fd3b 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c @@ -93,6 +93,8 @@ mlx5_eswitch_add_offloaded_rule(struct mlx5_eswitch *esw, spec, &flow_act, dest, i); if (IS_ERR(rule)) mlx5_fc_destroy(esw->dev, counter); + else + esw->offloads.num_flows++; return rule; } @@ -108,6 +110,7 @@ mlx5_eswitch_del_offloaded_rule(struct mlx5_eswitch *esw, counter = mlx5_flow_rule_counter(rule); mlx5_del_flow_rules(rule); mlx5_fc_destroy(esw->dev, counter); + esw->offloads.num_flows--; } } @@ -922,6 +925,11 @@ int mlx5_devlink_eswitch_inline_mode_set(struct devlink *devlink, u8 mode) MLX5_CAP_INLINE_MODE_VPORT_CONTEXT) return -EOPNOTSUPP; + if (esw->offloads.num_flows > 0) { + esw_warn(dev, "Can't set inline mode when flows are configured\n"); + return -EOPNOTSUPP; + } + err = esw_inline_mode_from_devlink(mode, &mlx5_mode); if (err) goto out; -- cgit v1.2.1 From 09c91ddf2cd33489c2c14edfef43ae38d412888e Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Tue, 21 Mar 2017 15:59:15 +0200 Subject: net/mlx5e: Use the proper UAPI values when offloading TC vlan actions Currently we use the non UAPI values and we miss erring on the modify action which is not supported, fix that. Fixes: 8b32580df1cb ('net/mlx5e: Add TC vlan action for SRIOV offloads') Signed-off-by: Or Gerlitz Reported-by: Petr Machata Reviewed-by: Jiri Pirko Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index 2825b5665456..9c13abaf3885 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -1131,14 +1131,16 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv, struct tcf_exts *exts, } if (is_tcf_vlan(a)) { - if (tcf_vlan_action(a) == VLAN_F_POP) { + if (tcf_vlan_action(a) == TCA_VLAN_ACT_POP) { attr->action |= MLX5_FLOW_CONTEXT_ACTION_VLAN_POP; - } else if (tcf_vlan_action(a) == VLAN_F_PUSH) { + } else if (tcf_vlan_action(a) == TCA_VLAN_ACT_PUSH) { if (tcf_vlan_push_proto(a) != htons(ETH_P_8021Q)) return -EOPNOTSUPP; attr->action |= MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH; attr->vlan = tcf_vlan_push_vid(a); + } else { /* action is TCA_VLAN_ACT_MODIFY */ + return -EOPNOTSUPP; } continue; } -- cgit v1.2.1 From 1ad9a00ae0efc2e9337148d6c382fad3d27bf99a Mon Sep 17 00:00:00 2001 From: Paul Blakey Date: Tue, 21 Mar 2017 15:59:16 +0200 Subject: net/mlx5e: Avoid supporting udp tunnel port ndo for VF reps This was added to allow the TC offloading code to identify offloading encap/decap vxlan rules. The VF reps are effectively related to the same mlx5 PCI device as the PF. Since the kernel invokes the (say) delete ndo for each netdev, the FW erred on multiple vxlan dst port deletes when the port was deleted from the system. We fix that by keeping the registration to be carried out only by the PF. Since the PF serves as the uplink device, the VF reps will look up a port there and realize if they are ok to offload that. Tested: ip link add vxlan1 type vxlan id 44 dev ens5f0 dstport 9999 ip link set vxlan1 up ip link del dev vxlan1 Fixes: 4a25730eb202 ('net/mlx5e: Add ndo_udp_tunnel_add to VF representors') Signed-off-by: Paul Blakey Reviewed-by: Or Gerlitz Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en.h | 4 ---- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 8 ++++---- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 2 -- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 9 +++++++-- 4 files changed, 11 insertions(+), 12 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index f6a6ded204f6..dc52053128bc 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -928,10 +928,6 @@ void mlx5e_destroy_netdev(struct mlx5_core_dev *mdev, struct mlx5e_priv *priv); int mlx5e_attach_netdev(struct mlx5_core_dev *mdev, struct net_device *netdev); void mlx5e_detach_netdev(struct mlx5_core_dev *mdev, struct net_device *netdev); u32 mlx5e_choose_lro_timeout(struct mlx5_core_dev *mdev, u32 wanted_timeout); -void mlx5e_add_vxlan_port(struct net_device *netdev, - struct udp_tunnel_info *ti); -void mlx5e_del_vxlan_port(struct net_device *netdev, - struct udp_tunnel_info *ti); int mlx5e_get_offload_stats(int attr_id, const struct net_device *dev, void *sp); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 8ef64c4db2c2..66c133757a5e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -3100,8 +3100,8 @@ static int mlx5e_get_vf_stats(struct net_device *dev, vf_stats); } -void mlx5e_add_vxlan_port(struct net_device *netdev, - struct udp_tunnel_info *ti) +static void mlx5e_add_vxlan_port(struct net_device *netdev, + struct udp_tunnel_info *ti) { struct mlx5e_priv *priv = netdev_priv(netdev); @@ -3114,8 +3114,8 @@ void mlx5e_add_vxlan_port(struct net_device *netdev, mlx5e_vxlan_queue_work(priv, ti->sa_family, be16_to_cpu(ti->port), 1); } -void mlx5e_del_vxlan_port(struct net_device *netdev, - struct udp_tunnel_info *ti) +static void mlx5e_del_vxlan_port(struct net_device *netdev, + struct udp_tunnel_info *ti) { struct mlx5e_priv *priv = netdev_priv(netdev); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 2c864574a9d5..f621373bd7a5 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -393,8 +393,6 @@ static const struct net_device_ops mlx5e_netdev_ops_rep = { .ndo_get_phys_port_name = mlx5e_rep_get_phys_port_name, .ndo_setup_tc = mlx5e_rep_ndo_setup_tc, .ndo_get_stats64 = mlx5e_rep_get_stats, - .ndo_udp_tunnel_add = mlx5e_add_vxlan_port, - .ndo_udp_tunnel_del = mlx5e_del_vxlan_port, .ndo_has_offload_stats = mlx5e_has_offload_stats, .ndo_get_offload_stats = mlx5e_get_offload_stats, }; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index 9c13abaf3885..fade7233dac5 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -267,12 +267,15 @@ static int parse_tunnel_attr(struct mlx5e_priv *priv, skb_flow_dissector_target(f->dissector, FLOW_DISSECTOR_KEY_ENC_PORTS, f->mask); + struct mlx5_eswitch *esw = priv->mdev->priv.eswitch; + struct net_device *up_dev = mlx5_eswitch_get_uplink_netdev(esw); + struct mlx5e_priv *up_priv = netdev_priv(up_dev); /* Full udp dst port must be given */ if (memchr_inv(&mask->dst, 0xff, sizeof(mask->dst))) goto vxlan_match_offload_err; - if (mlx5e_vxlan_lookup_port(priv, be16_to_cpu(key->dst)) && + if (mlx5e_vxlan_lookup_port(up_priv, be16_to_cpu(key->dst)) && MLX5_CAP_ESW(priv->mdev, vxlan_encap_decap)) parse_vxlan_attr(spec, f); else { @@ -995,6 +998,8 @@ static int mlx5e_attach_encap(struct mlx5e_priv *priv, struct mlx5_esw_flow_attr *attr) { struct mlx5_eswitch *esw = priv->mdev->priv.eswitch; + struct net_device *up_dev = mlx5_eswitch_get_uplink_netdev(esw); + struct mlx5e_priv *up_priv = netdev_priv(up_dev); unsigned short family = ip_tunnel_info_af(tun_info); struct ip_tunnel_key *key = &tun_info->key; struct mlx5_encap_entry *e; @@ -1015,7 +1020,7 @@ vxlan_encap_offload_err: return -EOPNOTSUPP; } - if (mlx5e_vxlan_lookup_port(priv, be16_to_cpu(key->tp_dst)) && + if (mlx5e_vxlan_lookup_port(up_priv, be16_to_cpu(key->tp_dst)) && MLX5_CAP_ESW(priv->mdev, vxlan_encap_decap)) { tunnel_type = MLX5_HEADER_TYPE_VXLAN; } else { -- cgit v1.2.1 From 5f40b4ed975c26016cf41953b7510fe90718e21c Mon Sep 17 00:00:00 2001 From: Maor Gottlieb Date: Tue, 21 Mar 2017 15:59:17 +0200 Subject: net/mlx5: Increase number of max QPs in default profile With ConnectX-4 sharing SRQs from the same space as QPs, we hit a limit preventing some applications to allocate needed QPs amount. Double the size to 256K. Fixes: e126ba97dba9e ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Maor Gottlieb Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index e2bd600d19de..60154a175bd3 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -87,7 +87,7 @@ static struct mlx5_profile profile[] = { [2] = { .mask = MLX5_PROF_MASK_QP_SIZE | MLX5_PROF_MASK_MR_CACHE, - .log_max_qp = 17, + .log_max_qp = 18, .mr_cache[0] = { .size = 500, .limit = 250 -- cgit v1.2.1 From d3a4e4da54c7adb420d5f48e89be913b14bdeff1 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Tue, 21 Mar 2017 15:59:18 +0200 Subject: net/mlx5e: Count GSO packets correctly TX packets statistics ('tx_packets' counter) used to count GSO packets as one, even though it contains multiple segments. This patch will increment the counter by the number of segments, and align the driver with the behavior of other drivers in the stack. Note that no information is lost in this patch due to 'tx_tso_packets' counter existence. Before, ethtool showed: $ ethtool -S ens6 | egrep "tx_packets|tx_tso_packets" tx_packets: 61340 tx_tso_packets: 60954 tx_packets_phy: 2451115 Now, we will see the more logical statistics: $ ethtool -S ens6 | egrep "tx_packets|tx_tso_packets" tx_packets: 2451115 tx_tso_packets: 60954 tx_packets_phy: 2451115 Fixes: e586b3b0baee ("net/mlx5: Ethernet Datapath files") Signed-off-by: Gal Pressman Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c index f193128bac4b..57f5e2d7ebd1 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c @@ -274,15 +274,18 @@ static netdev_tx_t mlx5e_sq_xmit(struct mlx5e_sq *sq, struct sk_buff *skb) sq->stats.tso_bytes += skb->len - ihs; } + sq->stats.packets += skb_shinfo(skb)->gso_segs; num_bytes = skb->len + (skb_shinfo(skb)->gso_segs - 1) * ihs; } else { bf = sq->bf_budget && !skb->xmit_more && !skb_shinfo(skb)->nr_frags; ihs = mlx5e_get_inline_hdr_size(sq, skb, bf); + sq->stats.packets++; num_bytes = max_t(unsigned int, skb->len, ETH_ZLEN); } + sq->stats.bytes += num_bytes; wi->num_bytes = num_bytes; ds_cnt = sizeof(*wqe) / MLX5_SEND_WQE_DS; @@ -381,8 +384,6 @@ static netdev_tx_t mlx5e_sq_xmit(struct mlx5e_sq *sq, struct sk_buff *skb) if (bf) sq->bf_budget--; - sq->stats.packets++; - sq->stats.bytes += num_bytes; return NETDEV_TX_OK; dma_unmap_wqe_err: -- cgit v1.2.1 From 8ab7e2ae15d84ba758b2c8c6f4075722e9bd2a08 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Tue, 21 Mar 2017 15:59:19 +0200 Subject: net/mlx5e: Count LRO packets correctly RX packets statistics ('rx_packets' counter) used to count LRO packets as one, even though it contains multiple segments. This patch will increment the counter by the number of segments, and align the driver with the behavior of other drivers in the stack. Note that no information is lost in this patch due to 'rx_lro_packets' counter existence. Before, ethtool showed: $ ethtool -S ens6 | egrep "rx_packets|rx_lro_packets" rx_packets: 435277 rx_lro_packets: 35847 rx_packets_phy: 1935066 Now, we will see the more logical statistics: $ ethtool -S ens6 | egrep "rx_packets|rx_lro_packets" rx_packets: 1935066 rx_lro_packets: 35847 rx_packets_phy: 1935066 Fixes: e586b3b0baee ("net/mlx5: Ethernet Datapath files") Signed-off-by: Gal Pressman Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c index 3d371688fbbb..bafcb349a50c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c @@ -601,6 +601,10 @@ static inline void mlx5e_build_rx_skb(struct mlx5_cqe64 *cqe, if (lro_num_seg > 1) { mlx5e_lro_update_hdr(skb, cqe, cqe_bcnt); skb_shinfo(skb)->gso_size = DIV_ROUND_UP(cqe_bcnt, lro_num_seg); + /* Subtract one since we already counted this as one + * "regular" packet in mlx5e_complete_rx_cqe() + */ + rq->stats.packets += lro_num_seg - 1; rq->stats.lro_packets++; rq->stats.lro_bytes += cqe_bcnt; } -- cgit v1.2.1 From 31739eae738ccbe8b9d627c3f2251017ca03f4d2 Mon Sep 17 00:00:00 2001 From: Doug Berger Date: Tue, 21 Mar 2017 14:01:06 -0700 Subject: net: bcmgenet: remove bcmgenet_internal_phy_setup() Commit 6ac3ce8295e6 ("net: bcmgenet: Remove excessive PHY reset") removed the bcmgenet_mii_reset() function from bcmgenet_power_up() and bcmgenet_internal_phy_setup() functions. In so doing it broke the reset of the internal PHY devices used by the GENETv1-GENETv3 which required this reset before the UniMAC was enabled. It also broke the internal GPHY devices used by the GENETv4 because the config_init that installed the AFE workaround was no longer occurring after the reset of the GPHY performed by bcmgenet_phy_power_set() in bcmgenet_internal_phy_setup(). In addition the code in bcmgenet_internal_phy_setup() related to the "enable APD" comment goes with the bcmgenet_mii_reset() so it should have also been removed. Commit bd4060a6108b ("net: bcmgenet: Power on integrated GPHY in bcmgenet_power_up()") moved the bcmgenet_phy_power_set() call to the bcmgenet_power_up() function, but failed to remove it from the bcmgenet_internal_phy_setup() function. Had it done so, the bcmgenet_internal_phy_setup() function would have been empty and could have been removed at that time. Commit 5dbebbb44a6a ("net: bcmgenet: Software reset EPHY after power on") was submitted to correct the functional problems introduced by commit 6ac3ce8295e6 ("net: bcmgenet: Remove excessive PHY reset"). It was included in v4.4 and made available on 4.3-stable. Unfortunately, it didn't fully revert the commit because this bcmgenet_mii_reset() doesn't apply the soft reset to the internal GPHY used by GENETv4 like the previous one did. This prevents the restoration of the AFE work- arounds for internal GPHY devices after the bcmgenet_phy_power_set() in bcmgenet_internal_phy_setup(). This commit takes the alternate approach of removing the unnecessary bcmgenet_internal_phy_setup() function which shouldn't have been in v4.3 so that when bcmgenet_mii_reset() was restored it should have only gone into bcmgenet_power_up(). This will avoid the problems while also removing the redundancy (and hopefully some of the confusion). Fixes: 6ac3ce8295e6 ("net: bcmgenet: Remove excessive PHY reset") Signed-off-by: Doug Berger Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmmii.c | 15 --------------- 1 file changed, 15 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c index e87607621e62..2f9281936f0e 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmmii.c +++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c @@ -220,20 +220,6 @@ void bcmgenet_phy_power_set(struct net_device *dev, bool enable) udelay(60); } -static void bcmgenet_internal_phy_setup(struct net_device *dev) -{ - struct bcmgenet_priv *priv = netdev_priv(dev); - u32 reg; - - /* Power up PHY */ - bcmgenet_phy_power_set(dev, true); - /* enable APD */ - reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT); - reg |= EXT_PWR_DN_EN_LD; - bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT); - bcmgenet_mii_reset(dev); -} - static void bcmgenet_moca_phy_setup(struct bcmgenet_priv *priv) { u32 reg; @@ -281,7 +267,6 @@ int bcmgenet_mii_config(struct net_device *dev) if (priv->internal_phy) { phy_name = "internal PHY"; - bcmgenet_internal_phy_setup(dev); } else if (priv->phy_interface == PHY_INTERFACE_MODE_MOCA) { phy_name = "MoCA"; bcmgenet_moca_phy_setup(priv); -- cgit v1.2.1 From c04ca616eed02b9abe7afd311382c3ed5eef5c40 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 22 Mar 2017 12:10:02 +0300 Subject: sfc: cleanup a condition in efx_udp_tunnel_del() Presumably if there is an "add" function, there is also a "del" function. But it causes a static checker warning because it looks like a common cut and paste bug. Signed-off-by: Dan Carpenter Acked-by: Jarod Wilson Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/efx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c index 334bcc6df6b2..50d28261b6b9 100644 --- a/drivers/net/ethernet/sfc/efx.c +++ b/drivers/net/ethernet/sfc/efx.c @@ -2404,7 +2404,7 @@ static void efx_udp_tunnel_del(struct net_device *dev, struct udp_tunnel_info *t tnl.type = (u16)efx_tunnel_type; tnl.port = ti->port; - if (efx->type->udp_tnl_add_port) + if (efx->type->udp_tnl_del_port) (void)efx->type->udp_tnl_del_port(efx, tnl); } -- cgit v1.2.1 From f43feef4e6acde10857fcbfdede790d6b3f2c71d Mon Sep 17 00:00:00 2001 From: "Lendacky, Thomas" Date: Wed, 22 Mar 2017 17:25:27 -0500 Subject: amd-xgbe: Fix the ECC-related bit position definitions The ECC bit positions that describe whether the ECC interrupt is for Tx, Rx or descriptor memory and whether the it is a single correctable or double detected error were defined in incorrectly (reversed order). Fix the bit position definitions for these settings so that the proper ECC handling is performed. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/xgbe/xgbe-common.h | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-common.h b/drivers/net/ethernet/amd/xgbe/xgbe-common.h index 86f1626816ff..127adbeefb10 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-common.h +++ b/drivers/net/ethernet/amd/xgbe/xgbe-common.h @@ -984,29 +984,29 @@ #define XP_ECC_CNT1_DESC_DED_WIDTH 8 #define XP_ECC_CNT1_DESC_SEC_INDEX 0 #define XP_ECC_CNT1_DESC_SEC_WIDTH 8 -#define XP_ECC_IER_DESC_DED_INDEX 0 +#define XP_ECC_IER_DESC_DED_INDEX 5 #define XP_ECC_IER_DESC_DED_WIDTH 1 -#define XP_ECC_IER_DESC_SEC_INDEX 1 +#define XP_ECC_IER_DESC_SEC_INDEX 4 #define XP_ECC_IER_DESC_SEC_WIDTH 1 -#define XP_ECC_IER_RX_DED_INDEX 2 +#define XP_ECC_IER_RX_DED_INDEX 3 #define XP_ECC_IER_RX_DED_WIDTH 1 -#define XP_ECC_IER_RX_SEC_INDEX 3 +#define XP_ECC_IER_RX_SEC_INDEX 2 #define XP_ECC_IER_RX_SEC_WIDTH 1 -#define XP_ECC_IER_TX_DED_INDEX 4 +#define XP_ECC_IER_TX_DED_INDEX 1 #define XP_ECC_IER_TX_DED_WIDTH 1 -#define XP_ECC_IER_TX_SEC_INDEX 5 +#define XP_ECC_IER_TX_SEC_INDEX 0 #define XP_ECC_IER_TX_SEC_WIDTH 1 -#define XP_ECC_ISR_DESC_DED_INDEX 0 +#define XP_ECC_ISR_DESC_DED_INDEX 5 #define XP_ECC_ISR_DESC_DED_WIDTH 1 -#define XP_ECC_ISR_DESC_SEC_INDEX 1 +#define XP_ECC_ISR_DESC_SEC_INDEX 4 #define XP_ECC_ISR_DESC_SEC_WIDTH 1 -#define XP_ECC_ISR_RX_DED_INDEX 2 +#define XP_ECC_ISR_RX_DED_INDEX 3 #define XP_ECC_ISR_RX_DED_WIDTH 1 -#define XP_ECC_ISR_RX_SEC_INDEX 3 +#define XP_ECC_ISR_RX_SEC_INDEX 2 #define XP_ECC_ISR_RX_SEC_WIDTH 1 -#define XP_ECC_ISR_TX_DED_INDEX 4 +#define XP_ECC_ISR_TX_DED_INDEX 1 #define XP_ECC_ISR_TX_DED_WIDTH 1 -#define XP_ECC_ISR_TX_SEC_INDEX 5 +#define XP_ECC_ISR_TX_SEC_INDEX 0 #define XP_ECC_ISR_TX_SEC_WIDTH 1 #define XP_I2C_MUTEX_BUSY_INDEX 31 #define XP_I2C_MUTEX_BUSY_WIDTH 1 -- cgit v1.2.1 From 68c386590375b2aea5a3154f17882a30170707bf Mon Sep 17 00:00:00 2001 From: Pavel Belous Date: Thu, 23 Mar 2017 02:20:39 +0300 Subject: net:ethernet:aquantia: Fix for RX checksum offload. Since AQC-100/107/108 chips supports hardware checksums for RX we should indicate this via NETIF_F_RXCSUM flag. v1->v2: 'Signed-off-by' tag added. Signed-off-by: Pavel Belous Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0_internal.h | 1 + drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0_internal.h | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0_internal.h b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0_internal.h index 1093ea18823a..0592a0330cf0 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0_internal.h +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0_internal.h @@ -137,6 +137,7 @@ static struct aq_hw_caps_s hw_atl_a0_hw_caps_ = { .tx_rings = HW_ATL_A0_TX_RINGS, .rx_rings = HW_ATL_A0_RX_RINGS, .hw_features = NETIF_F_HW_CSUM | + NETIF_F_RXCSUM | NETIF_F_RXHASH | NETIF_F_SG | NETIF_F_TSO, diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0_internal.h b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0_internal.h index 8bdee3ddd5a0..f3957e930340 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0_internal.h +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0_internal.h @@ -188,6 +188,7 @@ static struct aq_hw_caps_s hw_atl_b0_hw_caps_ = { .tx_rings = HW_ATL_B0_TX_RINGS, .rx_rings = HW_ATL_B0_RX_RINGS, .hw_features = NETIF_F_HW_CSUM | + NETIF_F_RXCSUM | NETIF_F_RXHASH | NETIF_F_SG | NETIF_F_TSO | -- cgit v1.2.1 From 1adbddef118ae8bf6409c13208645d28c29731c1 Mon Sep 17 00:00:00 2001 From: Pavel Belous Date: Thu, 23 Mar 2017 14:19:41 +0300 Subject: net:ethernet:aquantia: Remove adapter re-opening when MTU changed. Closing/opening the adapter is not needed at all. The new MTU settings take effect immediately. Fixes: 97bde5c4f909 ("net: ethernet: aquantia: Support for NIC-specific code") Signed-off-by: Pavel Belous Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_main.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_main.c b/drivers/net/ethernet/aquantia/atlantic/aq_main.c index d05fbfdce5e5..5d6c40d86775 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_main.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_main.c @@ -100,11 +100,6 @@ static int aq_ndev_change_mtu(struct net_device *ndev, int new_mtu) goto err_exit; ndev->mtu = new_mtu; - if (netif_running(ndev)) { - aq_ndev_close(ndev); - aq_ndev_open(ndev); - } - err_exit: return err; } -- cgit v1.2.1 From ea0504f554c8f989eab58549300d15582d36f039 Mon Sep 17 00:00:00 2001 From: Pavel Belous Date: Thu, 23 Mar 2017 14:19:42 +0300 Subject: net:ethernet:aquantia: Fix packet type detection (TCP/UDP) for IPv6. In order for the checksum offloads to work correctly we need to set the packet type bit (TCP/UDP) in the TX context buffer. Fixes: 97bde5c4f909 ("net: ethernet: aquantia: Support for NIC-specific code") Signed-off-by: Pavel Belous Tested-by: David Arcari Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c index ee78444bfb88..db2b51da2988 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c @@ -510,10 +510,22 @@ static unsigned int aq_nic_map_skb(struct aq_nic_s *self, if (skb->ip_summed == CHECKSUM_PARTIAL) { dx_buff->is_ip_cso = (htons(ETH_P_IP) == skb->protocol) ? 1U : 0U; - dx_buff->is_tcp_cso = - (ip_hdr(skb)->protocol == IPPROTO_TCP) ? 1U : 0U; - dx_buff->is_udp_cso = - (ip_hdr(skb)->protocol == IPPROTO_UDP) ? 1U : 0U; + + if (ip_hdr(skb)->version == 4) { + dx_buff->is_tcp_cso = + (ip_hdr(skb)->protocol == IPPROTO_TCP) ? + 1U : 0U; + dx_buff->is_udp_cso = + (ip_hdr(skb)->protocol == IPPROTO_UDP) ? + 1U : 0U; + } else if (ip_hdr(skb)->version == 6) { + dx_buff->is_tcp_cso = + (ipv6_hdr(skb)->nexthdr == NEXTHDR_TCP) ? + 1U : 0U; + dx_buff->is_udp_cso = + (ipv6_hdr(skb)->nexthdr == NEXTHDR_UDP) ? + 1U : 0U; + } } for (; nr_frags--; ++frag_count) { -- cgit v1.2.1 From 9f0dd8c322e89f137c44b437d6fbecc9dea12204 Mon Sep 17 00:00:00 2001 From: Pavel Belous Date: Thu, 23 Mar 2017 14:19:43 +0300 Subject: net:ethernet:aquantia: Missing spinlock initialization. Fix for missing initialization aq_ring header.lock spinlock. Fixes: 018423e90bee ("net: ethernet: aquantia: Add ring support code") Signed-off-by: Pavel Belous Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_ring.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c index 0358e6072d45..3a8a4aa13687 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c @@ -101,6 +101,7 @@ int aq_ring_init(struct aq_ring_s *self) self->hw_head = 0; self->sw_head = 0; self->sw_tail = 0; + spin_lock_init(&self->header.lock); return 0; } -- cgit v1.2.1 From 386aff88e32ec3f82e3f032217bad0c8c8846349 Mon Sep 17 00:00:00 2001 From: Pavel Belous Date: Thu, 23 Mar 2017 14:19:44 +0300 Subject: net:ethernet:aquantia: Fix for LSO with IPv6. Fix Context Command bit: L3 type = "0" for IPv4, "1" for IPv6. Fixes: bab6de8fd180 ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions.") Signed-off-by: Pavel Belous Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 3 +++ drivers/net/ethernet/aquantia/atlantic/aq_ring.h | 3 ++- drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c | 3 +++ drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c | 3 +++ 4 files changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c index db2b51da2988..cdb02991f249 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c @@ -487,6 +487,9 @@ static unsigned int aq_nic_map_skb(struct aq_nic_s *self, dx_buff->mss = skb_shinfo(skb)->gso_size; dx_buff->is_txc = 1U; + dx_buff->is_ipv6 = + (ip_hdr(skb)->version == 6) ? 1U : 0U; + dx = aq_ring_next_dx(ring, dx); dx_buff = &ring->buff_ring[dx]; ++ret; diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ring.h b/drivers/net/ethernet/aquantia/atlantic/aq_ring.h index 257254645068..eecd6d1c4d73 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_ring.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_ring.h @@ -58,7 +58,8 @@ struct __packed aq_ring_buff_s { u8 len_l2; u8 len_l3; u8 len_l4; - u8 rsvd2; + u8 is_ipv6:1; + u8 rsvd2:7; u32 len_pkt; }; }; diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c index a2b746a2dd50..a536875a7d0d 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c @@ -433,6 +433,9 @@ static int hw_atl_a0_hw_ring_tx_xmit(struct aq_hw_s *self, buff->len_l3 + buff->len_l2); is_gso = true; + + if (buff->is_ipv6) + txd->ctl |= HW_ATL_A0_TXD_CTL_CMD_IPV6; } else { buff_pa_len = buff->len; diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c index cab2931dab9a..69488c9b03e2 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c @@ -471,6 +471,9 @@ static int hw_atl_b0_hw_ring_tx_xmit(struct aq_hw_s *self, buff->len_l3 + buff->len_l2); is_gso = true; + + if (buff->is_ipv6) + txd->ctl |= HW_ATL_B0_TXD_CTL_CMD_IPV6; } else { buff_pa_len = buff->len; -- cgit v1.2.1 From 5d73bb863c2ef3aa1a28b5885c85ede7307df8ea Mon Sep 17 00:00:00 2001 From: Pavel Belous Date: Thu, 23 Mar 2017 14:19:45 +0300 Subject: net:ethernet:aquantia: Reset is_gso flag when EOP reached. We need to reset is_gso flag when EOP reached (entire LSO packet processed). Fixes: bab6de8fd180 ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions.") Signed-off-by: Pavel Belous Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c | 1 + drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c index a536875a7d0d..4ee15ff06a44 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c @@ -461,6 +461,7 @@ static int hw_atl_a0_hw_ring_tx_xmit(struct aq_hw_s *self, if (unlikely(buff->is_eop)) { txd->ctl |= HW_ATL_A0_TXD_CTL_EOP; txd->ctl |= HW_ATL_A0_TXD_CTL_CMD_WB; + is_gso = false; } } diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c index 69488c9b03e2..42150708191d 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c @@ -499,6 +499,7 @@ static int hw_atl_b0_hw_ring_tx_xmit(struct aq_hw_s *self, if (unlikely(buff->is_eop)) { txd->ctl |= HW_ATL_B0_TXD_CTL_EOP; txd->ctl |= HW_ATL_B0_TXD_CTL_CMD_WB; + is_gso = false; } } -- cgit v1.2.1 From a5af83925363eb85d467933e3d6ec5a87001eb7c Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 23 Mar 2017 17:07:26 +0100 Subject: bna: avoid writing uninitialized data into hw registers The latest gcc-7 snapshot warns about bfa_ioc_send_enable/bfa_ioc_send_disable writing undefined values into the hardware registers: drivers/net/ethernet/brocade/bna/bfa_ioc.c: In function 'bfa_iocpf_sm_disabling_entry': arch/arm/include/asm/io.h:109:22: error: '*((void *)&disable_req+4)' is used uninitialized in this function [-Werror=uninitialized] arch/arm/include/asm/io.h:109:22: error: '*((void *)&disable_req+8)' is used uninitialized in this function [-Werror=uninitialized] The two functions look like they should do the same thing, but only one of them initializes the time stamp and clscode field. The fact that we only get a warning for one of the two functions seems to be arbitrary, based on the inlining decisions in the compiler. To address this, I'm making both functions do the same thing: - set the clscode from the ioc structure in both - set the time stamp from ktime_get_real_seconds (which also avoids the signed-integer overflow in 2038 and extends the well-defined behavior until 2106). - zero-fill the reserved field Fixes: 8b230ed8ec96 ("bna: Brocade 10Gb Ethernet device driver") Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/ethernet/brocade/bna/bfa_ioc.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc.c b/drivers/net/ethernet/brocade/bna/bfa_ioc.c index 9e59663a6ead..0f6811860ad5 100644 --- a/drivers/net/ethernet/brocade/bna/bfa_ioc.c +++ b/drivers/net/ethernet/brocade/bna/bfa_ioc.c @@ -1930,13 +1930,13 @@ static void bfa_ioc_send_enable(struct bfa_ioc *ioc) { struct bfi_ioc_ctrl_req enable_req; - struct timeval tv; bfi_h2i_set(enable_req.mh, BFI_MC_IOC, BFI_IOC_H2I_ENABLE_REQ, bfa_ioc_portid(ioc)); enable_req.clscode = htons(ioc->clscode); - do_gettimeofday(&tv); - enable_req.tv_sec = ntohl(tv.tv_sec); + enable_req.rsvd = htons(0); + /* overflow in 2106 */ + enable_req.tv_sec = ntohl(ktime_get_real_seconds()); bfa_ioc_mbox_send(ioc, &enable_req, sizeof(struct bfi_ioc_ctrl_req)); } @@ -1947,6 +1947,10 @@ bfa_ioc_send_disable(struct bfa_ioc *ioc) bfi_h2i_set(disable_req.mh, BFI_MC_IOC, BFI_IOC_H2I_DISABLE_REQ, bfa_ioc_portid(ioc)); + disable_req.clscode = htons(ioc->clscode); + disable_req.rsvd = htons(0); + /* overflow in 2106 */ + disable_req.tv_sec = ntohl(ktime_get_real_seconds()); bfa_ioc_mbox_send(ioc, &disable_req, sizeof(struct bfi_ioc_ctrl_req)); } -- cgit v1.2.1 From 9f47a48e6eb97d793db85373e3ef4c55d876d334 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Thu, 23 Mar 2017 20:47:15 -0700 Subject: Revert "e1000e: driver trying to free already-free irq" This reverts commit 7e54d9d063fa239c95c21548c5267f0ef419ff56. After additional regression testing, several users are experiencing kernel panics during shutdown on e1000e devices. Reverting this change resolves the issue. Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/e1000e/netdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 2175cced402f..e9af89ad039c 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -6274,8 +6274,8 @@ static int e1000e_pm_freeze(struct device *dev) /* Quiesce the device without resetting the hardware */ e1000e_down(adapter, false); e1000_free_irq(adapter); - e1000e_reset_interrupt_capability(adapter); } + e1000e_reset_interrupt_capability(adapter); /* Allow time for pending master requests to run */ e1000e_disable_pcie_master(&adapter->hw); -- cgit v1.2.1 From 13a8cd191a2b470cfd435b3b57dbd21aa65ff78c Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Fri, 24 Mar 2017 15:01:42 -0700 Subject: i40e: Do not enable NAPI on q_vectors that have no rings When testing the epoll w/ busy poll code I found that I could get into a state where the i40e driver had q_vectors w/ active NAPI that had no rings. This was resulting in a divide by zero error. To correct it I am updating the driver code so that we only support NAPI on q_vectors that have 1 or more rings allocated to them. Signed-off-by: Alexander Duyck Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/i40e/i40e_main.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index e8a8351c8ea9..82a95cc2c8ee 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -4438,8 +4438,12 @@ static void i40e_napi_enable_all(struct i40e_vsi *vsi) if (!vsi->netdev) return; - for (q_idx = 0; q_idx < vsi->num_q_vectors; q_idx++) - napi_enable(&vsi->q_vectors[q_idx]->napi); + for (q_idx = 0; q_idx < vsi->num_q_vectors; q_idx++) { + struct i40e_q_vector *q_vector = vsi->q_vectors[q_idx]; + + if (q_vector->rx.ring || q_vector->tx.ring) + napi_enable(&q_vector->napi); + } } /** @@ -4453,8 +4457,12 @@ static void i40e_napi_disable_all(struct i40e_vsi *vsi) if (!vsi->netdev) return; - for (q_idx = 0; q_idx < vsi->num_q_vectors; q_idx++) - napi_disable(&vsi->q_vectors[q_idx]->napi); + for (q_idx = 0; q_idx < vsi->num_q_vectors; q_idx++) { + struct i40e_q_vector *q_vector = vsi->q_vectors[q_idx]; + + if (q_vector->rx.ring || q_vector->tx.ring) + napi_disable(&q_vector->napi); + } } /** -- cgit v1.2.1 From a17f1861b5ea4327f9f35e9edb3c5fadceaa7c64 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 24 Mar 2017 23:02:49 +0100 Subject: net: hns: fix uninitialized data use When dev_dbg() is enabled, we print uninitialized data, as gcc-7.0.1 now points out: ethernet/hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_set_promisc_tcam': ethernet/hisilicon/hns/hns_dsaf_main.c:2947:75: error: 'tbl_tcam_data.low.val' may be used uninitialized in this function [-Werror=maybe-uninitialized] ethernet/hisilicon/hns/hns_dsaf_main.c:2947:75: error: 'tbl_tcam_data.high.val' may be used uninitialized in this function [-Werror=maybe-uninitialized] We also pass the data into hns_dsaf_tcam_mc_cfg(), which might later use it (not sure about that), so it seems safer to just always initialize the tbl_tcam_data structure. Fixes: 1f5fa2dd1cfa ("net: hns: fix for promisc mode in HNS driver") Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c index 90dbda792614..cd93657abe87 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c @@ -2924,10 +2924,11 @@ void hns_dsaf_set_promisc_tcam(struct dsaf_device *dsaf_dev, /* find the tcam entry index for promisc */ entry_index = dsaf_promisc_tcam_entry(port); + memset(&tbl_tcam_data, 0, sizeof(tbl_tcam_data)); + memset(&tbl_tcam_mask, 0, sizeof(tbl_tcam_mask)); + /* config key mask */ if (enable) { - memset(&tbl_tcam_data, 0, sizeof(tbl_tcam_data)); - memset(&tbl_tcam_mask, 0, sizeof(tbl_tcam_mask)); dsaf_set_field(tbl_tcam_data.low.bits.port_vlan, DSAF_TBL_TCAM_KEY_PORT_M, DSAF_TBL_TCAM_KEY_PORT_S, port); -- cgit v1.2.1 From 834a61d455ff8069552f44140b2c1de85e6bc84d Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 24 Mar 2017 23:02:50 +0100 Subject: net: hns: avoid gcc-7.0.1 warning for uninitialized data hns_dsaf_set_mac_key() calls dsaf_set_field() on an uninitialized field, which will then change only a few of its bits, causing a warning with the latest gcc: hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_set_mac_uc_entry': hisilicon/hns/hns_dsaf_reg.h:1046:12: error: 'mac_key.low.bits.port_vlan' may be used uninitialized in this function [-Werror=maybe-uninitialized] (origin) &= (~(mask)); \ ^~ hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_set_mac_mc_entry': hisilicon/hns/hns_dsaf_reg.h:1046:12: error: 'mac_key.low.bits.port_vlan' may be used uninitialized in this function [-Werror=maybe-uninitialized] hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_add_mac_mc_port': hisilicon/hns/hns_dsaf_reg.h:1046:12: error: 'mac_key.low.bits.port_vlan' may be used uninitialized in this function [-Werror=maybe-uninitialized] hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_del_mac_entry': hisilicon/hns/hns_dsaf_reg.h:1046:12: error: 'mac_key.low.bits.port_vlan' may be used uninitialized in this function [-Werror=maybe-uninitialized] hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_rm_mac_addr': hisilicon/hns/hns_dsaf_reg.h:1046:12: error: 'mac_key.low.bits.port_vlan' may be used uninitialized in this function [-Werror=maybe-uninitialized] hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_del_mac_mc_port': hisilicon/hns/hns_dsaf_reg.h:1046:12: error: 'mac_key.low.bits.port_vlan' may be used uninitialized in this function [-Werror=maybe-uninitialized] hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_get_mac_uc_entry': hisilicon/hns/hns_dsaf_reg.h:1046:12: error: 'mac_key.low.bits.port_vlan' may be used uninitialized in this function [-Werror=maybe-uninitialized] hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_get_mac_mc_entry': hisilicon/hns/hns_dsaf_reg.h:1046:12: error: 'mac_key.low.bits.port_vlan' may be used uninitialized in this function [-Werror=maybe-uninitialized] The code is actually correct since we always set all 16 bits of the port_vlan field, but gcc correctly points out that the first access does contain uninitialized data. This initializes the field to zero first before setting the individual bits. Fixes: 5483bfcb169c ("net: hns: modify tcam table and set mac key") Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c index cd93657abe87..403ea9db6dbd 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c @@ -1519,6 +1519,7 @@ static void hns_dsaf_set_mac_key( mac_key->high.bits.mac_3 = addr[3]; mac_key->low.bits.mac_4 = addr[4]; mac_key->low.bits.mac_5 = addr[5]; + mac_key->low.bits.port_vlan = 0; dsaf_set_field(mac_key->low.bits.port_vlan, DSAF_TBL_TCAM_KEY_VLAN_M, DSAF_TBL_TCAM_KEY_VLAN_S, vlan_id); dsaf_set_field(mac_key->low.bits.port_vlan, DSAF_TBL_TCAM_KEY_PORT_M, -- cgit v1.2.1 From c2b341a620018d4eaeb0e85c16274ac4e5f153d4 Mon Sep 17 00:00:00 2001 From: Jonas Jensen Date: Tue, 28 Mar 2017 12:12:38 +0200 Subject: net: moxa: fix TX overrun memory leak moxart_mac_start_xmit() doesn't care where tx_tail is, tx_head can catch and pass tx_tail, which is bad because moxart_tx_finished() isn't guaranteed to catch up on freeing resources from tx_tail. Add a check in moxart_mac_start_xmit() stopping the queue at the end of the circular buffer. Also add a check in moxart_tx_finished() waking the queue if the buffer has TX_WAKE_THRESHOLD or more free descriptors. While we're at it, move spin_lock_irq() to happen before our descriptor pointer is assigned in moxart_mac_start_xmit(). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=99451 Signed-off-by: Jonas Jensen Signed-off-by: David S. Miller --- drivers/net/ethernet/moxa/moxart_ether.c | 20 ++++++++++++++++++-- drivers/net/ethernet/moxa/moxart_ether.h | 1 + 2 files changed, 19 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/moxa/moxart_ether.c b/drivers/net/ethernet/moxa/moxart_ether.c index 06c9f4100cb9..6ad44be08b33 100644 --- a/drivers/net/ethernet/moxa/moxart_ether.c +++ b/drivers/net/ethernet/moxa/moxart_ether.c @@ -25,6 +25,7 @@ #include #include #include +#include #include "moxart_ether.h" @@ -278,6 +279,13 @@ rx_next: return rx; } +static int moxart_tx_queue_space(struct net_device *ndev) +{ + struct moxart_mac_priv_t *priv = netdev_priv(ndev); + + return CIRC_SPACE(priv->tx_head, priv->tx_tail, TX_DESC_NUM); +} + static void moxart_tx_finished(struct net_device *ndev) { struct moxart_mac_priv_t *priv = netdev_priv(ndev); @@ -297,6 +305,9 @@ static void moxart_tx_finished(struct net_device *ndev) tx_tail = TX_NEXT(tx_tail); } priv->tx_tail = tx_tail; + if (netif_queue_stopped(ndev) && + moxart_tx_queue_space(ndev) >= TX_WAKE_THRESHOLD) + netif_wake_queue(ndev); } static irqreturn_t moxart_mac_interrupt(int irq, void *dev_id) @@ -324,13 +335,18 @@ static int moxart_mac_start_xmit(struct sk_buff *skb, struct net_device *ndev) struct moxart_mac_priv_t *priv = netdev_priv(ndev); void *desc; unsigned int len; - unsigned int tx_head = priv->tx_head; + unsigned int tx_head; u32 txdes1; int ret = NETDEV_TX_BUSY; + spin_lock_irq(&priv->txlock); + + tx_head = priv->tx_head; desc = priv->tx_desc_base + (TX_REG_DESC_SIZE * tx_head); - spin_lock_irq(&priv->txlock); + if (moxart_tx_queue_space(ndev) == 1) + netif_stop_queue(ndev); + if (moxart_desc_read(desc + TX_REG_OFFSET_DESC0) & TX_DESC0_DMA_OWN) { net_dbg_ratelimited("no TX space for packet\n"); priv->stats.tx_dropped++; diff --git a/drivers/net/ethernet/moxa/moxart_ether.h b/drivers/net/ethernet/moxa/moxart_ether.h index 93a9563ac7c6..afc32ec998c0 100644 --- a/drivers/net/ethernet/moxa/moxart_ether.h +++ b/drivers/net/ethernet/moxa/moxart_ether.h @@ -59,6 +59,7 @@ #define TX_NEXT(N) (((N) + 1) & (TX_DESC_NUM_MASK)) #define TX_BUF_SIZE 1600 #define TX_BUF_SIZE_MAX (TX_DESC1_BUF_SIZE_MASK+1) +#define TX_WAKE_THRESHOLD 16 #define RX_DESC_NUM 64 #define RX_DESC_NUM_MASK (RX_DESC_NUM-1) -- cgit v1.2.1 From e497ec680c4cd51e76bfcdd49363d9ab8d32a757 Mon Sep 17 00:00:00 2001 From: Talat Batheesh Date: Tue, 28 Mar 2017 16:13:41 +0300 Subject: net/mlx5: Avoid dereferencing uninitialized pointer In NETDEV_CHANGEUPPER event the upper_info field is valid only when linking is true. Otherwise it should be ignored. Fixes: 7907f23adc18 (net/mlx5: Implement RoCE LAG feature) Signed-off-by: Talat Batheesh Reviewed-by: Aviv Heller Reviewed-by: Moni Shoua Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/lag.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag.c b/drivers/net/ethernet/mellanox/mlx5/core/lag.c index 55957246c0e8..b5d5519542e8 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/lag.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/lag.c @@ -294,7 +294,7 @@ static int mlx5_handle_changeupper_event(struct mlx5_lag *ldev, struct netdev_notifier_changeupper_info *info) { struct net_device *upper = info->upper_dev, *ndev_tmp; - struct netdev_lag_upper_info *lag_upper_info; + struct netdev_lag_upper_info *lag_upper_info = NULL; bool is_bonded; int bond_status = 0; int num_slaves = 0; @@ -303,7 +303,8 @@ static int mlx5_handle_changeupper_event(struct mlx5_lag *ldev, if (!netif_is_lag_master(upper)) return 0; - lag_upper_info = info->upper_info; + if (info->linking) + lag_upper_info = info->upper_info; /* The event may still be of interest if the slave does not belong to * us, but is enslaved to a master which has one or more of our netdevs -- cgit v1.2.1 From 16b8b6de32572207abeb4dfb74ab7bd8409a5690 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 28 Mar 2017 16:11:18 +0200 Subject: rocker: fix Wmaybe-uninitialized false-positive gcc-7 reports a warning that earlier versions did not have: drivers/net/ethernet/rocker/rocker_ofdpa.c: In function 'ofdpa_port_stp_update': arch/x86/include/asm/string_32.h:79:22: error: '*((void *)&prev_ctrls+4)' may be used uninitialized in this function [-Werror=maybe-uninitialized] *((short *)to + 2) = *((short *)from + 2); ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/rocker/rocker_ofdpa.c:2218:7: note: '*((void *)&prev_ctrls+4)' was declared here This is clearly a variation of the warning about 'prev_state' that was shut up using uninitialized_var(). We can slightly simplify the code and get rid of the warning by unconditionally saving the prev_state and prev_ctrls variables. The inlined memcpy is not particularly expensive here, as it just has to read five bytes from one or two cache lines. Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/ethernet/rocker/rocker_ofdpa.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/rocker/rocker_ofdpa.c b/drivers/net/ethernet/rocker/rocker_ofdpa.c index 7cd76b6b5cb9..2ae852454780 100644 --- a/drivers/net/ethernet/rocker/rocker_ofdpa.c +++ b/drivers/net/ethernet/rocker/rocker_ofdpa.c @@ -2216,18 +2216,15 @@ static int ofdpa_port_stp_update(struct ofdpa_port *ofdpa_port, { bool want[OFDPA_CTRL_MAX] = { 0, }; bool prev_ctrls[OFDPA_CTRL_MAX]; - u8 uninitialized_var(prev_state); + u8 prev_state; int err; int i; - if (switchdev_trans_ph_prepare(trans)) { - memcpy(prev_ctrls, ofdpa_port->ctrls, sizeof(prev_ctrls)); - prev_state = ofdpa_port->stp_state; - } - - if (ofdpa_port->stp_state == state) + prev_state = ofdpa_port->stp_state; + if (prev_state == state) return 0; + memcpy(prev_ctrls, ofdpa_port->ctrls, sizeof(prev_ctrls)); ofdpa_port->stp_state = state; switch (state) { -- cgit v1.2.1 From 2247925f0942dc4e7c09b1cde45ca18461d94c5f Mon Sep 17 00:00:00 2001 From: Sankar Patchineelam Date: Tue, 28 Mar 2017 19:47:29 -0400 Subject: bnxt_en: Fix NULL pointer dereference in reopen failure path Net device reset can fail when the h/w or f/w is in a bad state. Subsequent netdevice open fails in bnxt_hwrm_stat_ctx_alloc(). The cleanup invokes bnxt_hwrm_resource_free() which inturn calls bnxt_disable_int(). In this routine, the code segment if (ring->fw_ring_id != INVALID_HW_RING_ID) BNXT_CP_DB(cpr->cp_doorbell, cpr->cp_raw_cons); results in NULL pointer dereference as cpr->cp_doorbell is not yet initialized, and fw_ring_id is zero. The fix is to initialize cpr fw_ring_id to INVALID_HW_RING_ID before bnxt_init_chip() is invoked. Signed-off-by: Sankar Patchineelam Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 32de4589d16a..7ee772483f26 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -2455,6 +2455,18 @@ static int bnxt_init_one_rx_ring(struct bnxt *bp, int ring_nr) return 0; } +static void bnxt_init_cp_rings(struct bnxt *bp) +{ + int i; + + for (i = 0; i < bp->cp_nr_rings; i++) { + struct bnxt_cp_ring_info *cpr = &bp->bnapi[i]->cp_ring; + struct bnxt_ring_struct *ring = &cpr->cp_ring_struct; + + ring->fw_ring_id = INVALID_HW_RING_ID; + } +} + static int bnxt_init_rx_rings(struct bnxt *bp) { int i, rc = 0; @@ -5006,6 +5018,7 @@ static int bnxt_shutdown_nic(struct bnxt *bp, bool irq_re_init) static int bnxt_init_nic(struct bnxt *bp, bool irq_re_init) { + bnxt_init_cp_rings(bp); bnxt_init_rx_rings(bp); bnxt_init_tx_rings(bp); bnxt_init_ring_grps(bp, irq_re_init); -- cgit v1.2.1 From 23e12c893489ed12ecfccbf866fc62af1bead4b0 Mon Sep 17 00:00:00 2001 From: Sankar Patchineelam Date: Tue, 28 Mar 2017 19:47:30 -0400 Subject: bnxt_en: Correct the order of arguments to netdev_err() in bnxt_set_tpa() Signed-off-by: Sankar Patchineelam Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 7ee772483f26..6c8568780a6a 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -4744,7 +4744,7 @@ static int bnxt_set_tpa(struct bnxt *bp, bool set_tpa) rc = bnxt_hwrm_vnic_set_tpa(bp, i, tpa_flags); if (rc) { netdev_err(bp->dev, "hwrm vnic set tpa failure rc for vnic %d: %x\n", - rc, i); + i, rc); return rc; } } -- cgit v1.2.1 From 3ed3a83e3f3871c57b18cef09b148e96921236ed Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 28 Mar 2017 19:47:31 -0400 Subject: bnxt_en: Fix DMA unmapping of the RX buffers in XDP mode during shutdown. In bnxt_free_rx_skbs(), which is called to free up all RX buffers during shutdown, we need to unmap the page if we are running in XDP mode. Fixes: c61fb99cae51 ("bnxt_en: Add RX page mode support.") Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 6c8568780a6a..1f1e54ba0ecb 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -1983,20 +1983,25 @@ static void bnxt_free_rx_skbs(struct bnxt *bp) for (j = 0; j < max_idx; j++) { struct bnxt_sw_rx_bd *rx_buf = &rxr->rx_buf_ring[j]; + dma_addr_t mapping = rx_buf->mapping; void *data = rx_buf->data; if (!data) continue; - dma_unmap_single(&pdev->dev, rx_buf->mapping, - bp->rx_buf_use_size, bp->rx_dir); - rx_buf->data = NULL; - if (BNXT_RX_PAGE_MODE(bp)) + if (BNXT_RX_PAGE_MODE(bp)) { + mapping -= bp->rx_dma_offset; + dma_unmap_page(&pdev->dev, mapping, + PAGE_SIZE, bp->rx_dir); __free_page(data); - else + } else { + dma_unmap_single(&pdev->dev, mapping, + bp->rx_buf_use_size, + bp->rx_dir); kfree(data); + } } for (j = 0; j < max_agg_idx; j++) { -- cgit v1.2.1 From 358e78b5f445c35f5b7f9241425fb499ee9fe3e2 Mon Sep 17 00:00:00 2001 From: Zakharov Vlad Date: Wed, 29 Mar 2017 13:41:46 +0300 Subject: ezchip: nps_enet: check if napi has been completed After a new NAPI_STATE_MISSED state was added to NAPI we can get into this state and in such case we have to reschedule NAPI as some work is still pending and we have to process it. napi_complete_done() function returns false if we have to reschedule something (e.g. in case we were in MISSED state) as current polling have not been completed yet. nps_enet driver hasn't been verifying the return value of napi_complete_done() and has been forcibly enabling interrupts. That is not correct as we should not enable interrupts before we have processed all scheduled work. As a result we were getting trapped in interrupt hanlder chain as we had never been able to disabale ethernet interrupts again. So this patch makes nps_enet_poll() func verify return value of napi_complete_done() and enable interrupts only in case all scheduled work has been completed. Signed-off-by: Vlad Zakharov Signed-off-by: David S. Miller --- drivers/net/ethernet/ezchip/nps_enet.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/ezchip/nps_enet.c b/drivers/net/ethernet/ezchip/nps_enet.c index 992ebe973d25..f819843e2bae 100644 --- a/drivers/net/ethernet/ezchip/nps_enet.c +++ b/drivers/net/ethernet/ezchip/nps_enet.c @@ -189,11 +189,9 @@ static int nps_enet_poll(struct napi_struct *napi, int budget) nps_enet_tx_handler(ndev); work_done = nps_enet_rx_handler(ndev); - if (work_done < budget) { + if ((work_done < budget) && napi_complete_done(napi, work_done)) { u32 buf_int_enable_value = 0; - napi_complete_done(napi, work_done); - /* set tx_done and rx_rdy bits */ buf_int_enable_value |= NPS_ENET_ENABLE << RX_RDY_SHIFT; buf_int_enable_value |= NPS_ENET_ENABLE << TX_DONE_SHIFT; -- cgit v1.2.1 From 0b98ca2a45e35dfe02f4512fa30b9f5a9900cb29 Mon Sep 17 00:00:00 2001 From: Suresh Reddy Date: Thu, 30 Mar 2017 00:58:32 -0400 Subject: be2net: Fix endian issue in logical link config command Use cpu_to_le32() for link_config variable in set_logical_link_config command as this variable is of type u32. Signed-off-by: Suresh Reddy Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_cmds.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index 30e855004c57..02dd5246dfae 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -4939,8 +4939,9 @@ static int __be_cmd_set_logical_link_config(struct be_adapter *adapter, int link_state, int version, u8 domain) { - struct be_mcc_wrb *wrb; struct be_cmd_req_set_ll_link *req; + struct be_mcc_wrb *wrb; + u32 link_config = 0; int status; mutex_lock(&adapter->mcc_lock); @@ -4962,10 +4963,12 @@ __be_cmd_set_logical_link_config(struct be_adapter *adapter, if (link_state == IFLA_VF_LINK_STATE_ENABLE || link_state == IFLA_VF_LINK_STATE_AUTO) - req->link_config |= PLINK_ENABLE; + link_config |= PLINK_ENABLE; if (link_state == IFLA_VF_LINK_STATE_AUTO) - req->link_config |= PLINK_TRACK; + link_config |= PLINK_TRACK; + + req->link_config = cpu_to_le32(link_config); status = be_mcc_notify_wait(adapter); err: -- cgit v1.2.1 From b917078c1c107ce34264af893e436e6115eeb9f6 Mon Sep 17 00:00:00 2001 From: Daode Huang Date: Thu, 30 Mar 2017 16:37:41 +0100 Subject: net: hns: Add ACPI support to check SFP present The current code only supports DT to check SFP present. This patch adds ACPI support as well. Signed-off-by: Daode Huang Reviewed-by: Yisen Zhuang Signed-off-by: Salil Mehta Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c | 11 +++++---- drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c | 28 +++++++++++++++++++++- 2 files changed, 34 insertions(+), 5 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c index 3239d27143b9..bdd8cdd732fb 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c @@ -82,9 +82,12 @@ void hns_mac_get_link_status(struct hns_mac_cb *mac_cb, u32 *link_status) else *link_status = 0; - ret = mac_cb->dsaf_dev->misc_op->get_sfp_prsnt(mac_cb, &sfp_prsnt); - if (!ret) - *link_status = *link_status && sfp_prsnt; + if (mac_cb->media_type == HNAE_MEDIA_TYPE_FIBER) { + ret = mac_cb->dsaf_dev->misc_op->get_sfp_prsnt(mac_cb, + &sfp_prsnt); + if (!ret) + *link_status = *link_status && sfp_prsnt; + } mac_cb->link = *link_status; } @@ -855,7 +858,7 @@ static int hns_mac_get_info(struct hns_mac_cb *mac_cb) of_node_put(np); np = of_parse_phandle(to_of_node(mac_cb->fw_port), - "serdes-syscon", 0); + "serdes-syscon", 0); syscon = syscon_node_to_regmap(np); of_node_put(np); if (IS_ERR_OR_NULL(syscon)) { diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c index a2c22d084ce9..e13aa064a8e9 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c @@ -461,6 +461,32 @@ int hns_mac_get_sfp_prsnt(struct hns_mac_cb *mac_cb, int *sfp_prsnt) return 0; } +int hns_mac_get_sfp_prsnt_acpi(struct hns_mac_cb *mac_cb, int *sfp_prsnt) +{ + union acpi_object *obj; + union acpi_object obj_args, argv4; + + obj_args.integer.type = ACPI_TYPE_INTEGER; + obj_args.integer.value = mac_cb->mac_id; + + argv4.type = ACPI_TYPE_PACKAGE, + argv4.package.count = 1, + argv4.package.elements = &obj_args, + + obj = acpi_evaluate_dsm(ACPI_HANDLE(mac_cb->dev), + hns_dsaf_acpi_dsm_uuid, 0, + HNS_OP_GET_SFP_STAT_FUNC, &argv4); + + if (!obj || obj->type != ACPI_TYPE_INTEGER) + return -ENODEV; + + *sfp_prsnt = obj->integer.value; + + ACPI_FREE(obj); + + return 0; +} + /** * hns_mac_config_sds_loopback - set loop back for serdes * @mac_cb: mac control block @@ -592,7 +618,7 @@ struct dsaf_misc_op *hns_misc_op_get(struct dsaf_device *dsaf_dev) misc_op->hns_dsaf_roce_srst = hns_dsaf_roce_srst_acpi; misc_op->get_phy_if = hns_mac_get_phy_if_acpi; - misc_op->get_sfp_prsnt = hns_mac_get_sfp_prsnt; + misc_op->get_sfp_prsnt = hns_mac_get_sfp_prsnt_acpi; misc_op->cfg_serdes_loopback = hns_mac_config_sds_loopback_acpi; } else { -- cgit v1.2.1 From 3af887c38f1ae0db66c00c4ee2e8a0b1e99ffc29 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 30 Mar 2017 17:00:12 +0100 Subject: net/faraday: Explicitly include linux/of.h and linux/property.h This driver uses interfaces from linux/of.h and linux/property.h but relies on implict inclusion of those headers which means that changes in other headers could break the build, as happened in -next for arm today. Add a explicit includes. Signed-off-by: Mark Brown Acked-by: Joel Stanley Signed-off-by: David S. Miller --- drivers/net/ethernet/faraday/ftgmac100.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c index 928b0df2b8e0..ade6b3e4ed13 100644 --- a/drivers/net/ethernet/faraday/ftgmac100.c +++ b/drivers/net/ethernet/faraday/ftgmac100.c @@ -28,8 +28,10 @@ #include #include #include +#include #include #include +#include #include #include -- cgit v1.2.1 From 75514b6654859e0130b512396dc964d2a9e84967 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Fri, 31 Mar 2017 18:41:23 -0500 Subject: net: ethernet: ti: cpsw: wake tx queues on ndo_tx_timeout In case, if TX watchdog is fired some or all netdev TX queues will be stopped and as part of recovery it is required not only to drain and reinitailize CPSW TX channeles, but also wake up stoppted TX queues what doesn't happen now and netdevice will stop transmiting data until reopenned. Hence, add netif_tx_wake_all_queues() call in .ndo_tx_timeout() to complete recovery and restore TX path. Signed-off-by: Grygorii Strashko Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 9f3d9c67e3fe..58cdc066ef2c 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1817,6 +1817,8 @@ static void cpsw_ndo_tx_timeout(struct net_device *ndev) } cpsw_intr_enable(cpsw); + netif_trans_update(ndev); + netif_tx_wake_all_queues(ndev); } static int cpsw_ndo_set_mac_address(struct net_device *ndev, void *p) -- cgit v1.2.1 From a8919661d78b90d747b3514197e49ecf8727d08c Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 3 Apr 2017 11:19:10 +0100 Subject: bnx2x: fix spelling mistake in macros HW_INTERRUT_ASSERT_SET_* Trival fix, rename HW_INTERRUT_ASSERT_SET_* to HW_INTERRUPT_ASSERT_SET_* Signed-off-by: Colin Ian King Acked-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 6 +++--- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 18 +++++++++--------- 2 files changed, 12 insertions(+), 12 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 0a23034bbe3f..352beff796ae 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -2277,7 +2277,7 @@ void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id, GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RBCP) | \ GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RSVD_GRC)) -#define HW_INTERRUT_ASSERT_SET_0 \ +#define HW_INTERRUPT_ASSERT_SET_0 \ (AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT | \ AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT | \ AEU_INPUTS_ATTN_BITS_TSEMI_HW_INTERRUPT | \ @@ -2290,7 +2290,7 @@ void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id, AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR |\ AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR |\ AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR) -#define HW_INTERRUT_ASSERT_SET_1 \ +#define HW_INTERRUPT_ASSERT_SET_1 \ (AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT | \ AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT | \ AEU_INPUTS_ATTN_BITS_XSDM_HW_INTERRUPT | \ @@ -2318,7 +2318,7 @@ void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id, AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR | \ AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR |\ AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR) -#define HW_INTERRUT_ASSERT_SET_2 \ +#define HW_INTERRUPT_ASSERT_SET_2 \ (AEU_INPUTS_ATTN_BITS_CSEMI_HW_INTERRUPT | \ AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT | \ AEU_INPUTS_ATTN_BITS_DMAE_HW_INTERRUPT | \ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index ac76fc251d26..a851f95c307a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -4166,14 +4166,14 @@ static void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn) bnx2x_release_phy_lock(bp); } - if (attn & HW_INTERRUT_ASSERT_SET_0) { + if (attn & HW_INTERRUPT_ASSERT_SET_0) { val = REG_RD(bp, reg_offset); - val &= ~(attn & HW_INTERRUT_ASSERT_SET_0); + val &= ~(attn & HW_INTERRUPT_ASSERT_SET_0); REG_WR(bp, reg_offset, val); BNX2X_ERR("FATAL HW block attention set0 0x%x\n", - (u32)(attn & HW_INTERRUT_ASSERT_SET_0)); + (u32)(attn & HW_INTERRUPT_ASSERT_SET_0)); bnx2x_panic(); } } @@ -4191,7 +4191,7 @@ static void bnx2x_attn_int_deasserted1(struct bnx2x *bp, u32 attn) BNX2X_ERR("FATAL error from DORQ\n"); } - if (attn & HW_INTERRUT_ASSERT_SET_1) { + if (attn & HW_INTERRUPT_ASSERT_SET_1) { int port = BP_PORT(bp); int reg_offset; @@ -4200,11 +4200,11 @@ static void bnx2x_attn_int_deasserted1(struct bnx2x *bp, u32 attn) MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1); val = REG_RD(bp, reg_offset); - val &= ~(attn & HW_INTERRUT_ASSERT_SET_1); + val &= ~(attn & HW_INTERRUPT_ASSERT_SET_1); REG_WR(bp, reg_offset, val); BNX2X_ERR("FATAL HW block attention set1 0x%x\n", - (u32)(attn & HW_INTERRUT_ASSERT_SET_1)); + (u32)(attn & HW_INTERRUPT_ASSERT_SET_1)); bnx2x_panic(); } } @@ -4235,7 +4235,7 @@ static void bnx2x_attn_int_deasserted2(struct bnx2x *bp, u32 attn) } } - if (attn & HW_INTERRUT_ASSERT_SET_2) { + if (attn & HW_INTERRUPT_ASSERT_SET_2) { int port = BP_PORT(bp); int reg_offset; @@ -4244,11 +4244,11 @@ static void bnx2x_attn_int_deasserted2(struct bnx2x *bp, u32 attn) MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2); val = REG_RD(bp, reg_offset); - val &= ~(attn & HW_INTERRUT_ASSERT_SET_2); + val &= ~(attn & HW_INTERRUPT_ASSERT_SET_2); REG_WR(bp, reg_offset, val); BNX2X_ERR("FATAL HW block attention set2 0x%x\n", - (u32)(attn & HW_INTERRUT_ASSERT_SET_2)); + (u32)(attn & HW_INTERRUPT_ASSERT_SET_2)); bnx2x_panic(); } } -- cgit v1.2.1 From 30c57f073449e09ae42f908bfff56c08c8751a6f Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Mon, 3 Apr 2017 17:34:28 +0530 Subject: net: ethernet: ti: cpsw: fix race condition during open() TI's cpsw driver handles both OF and non-OF case for phy connect. Unfortunately of_phy_connect() returns NULL on error while phy_connect() returns ERR_PTR(). To handle this, cpsw_slave_open() overrides the return value from phy_connect() to make it NULL or error. This leaves a small window, where cpsw_adjust_link() may be invoked for a slave while slave->phy pointer is temporarily set to -ENODEV (or some other error) before it is finally set to NULL. _cpsw_adjust_link() only handles the NULL case, and an oops results when ERR_PTR() is seen by it. Note that cpsw_adjust_link() checks PHY status for each slave whenever it is invoked. It can so happen that even though phy_connect() for a given slave returns error, _cpsw_adjust_link() is still called for that slave because the link status of another slave changed. Fix this by using a temporary pointer to store return value of {of_}phy_connect() and do a one-time write to slave->phy. Reviewed-by: Grygorii Strashko Reported-by: Yan Liu Signed-off-by: Sekhar Nori Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 58cdc066ef2c..fa674a8bda0c 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1267,6 +1267,7 @@ static void soft_reset_slave(struct cpsw_slave *slave) static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv) { u32 slave_port; + struct phy_device *phy; struct cpsw_common *cpsw = priv->cpsw; soft_reset_slave(slave); @@ -1300,27 +1301,28 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv) 1 << slave_port, 0, 0, ALE_MCAST_FWD_2); if (slave->data->phy_node) { - slave->phy = of_phy_connect(priv->ndev, slave->data->phy_node, + phy = of_phy_connect(priv->ndev, slave->data->phy_node, &cpsw_adjust_link, 0, slave->data->phy_if); - if (!slave->phy) { + if (!phy) { dev_err(priv->dev, "phy \"%s\" not found on slave %d\n", slave->data->phy_node->full_name, slave->slave_num); return; } } else { - slave->phy = phy_connect(priv->ndev, slave->data->phy_id, + phy = phy_connect(priv->ndev, slave->data->phy_id, &cpsw_adjust_link, slave->data->phy_if); - if (IS_ERR(slave->phy)) { + if (IS_ERR(phy)) { dev_err(priv->dev, "phy \"%s\" not found on slave %d, err %ld\n", slave->data->phy_id, slave->slave_num, - PTR_ERR(slave->phy)); - slave->phy = NULL; + PTR_ERR(phy)); return; } } + slave->phy = phy; + phy_attached_info(slave->phy); phy_start(slave->phy); -- cgit v1.2.1 From c383bdd14f91562babd269aa7c36b46fee7b6c75 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Tue, 4 Apr 2017 15:56:55 -0700 Subject: nfp: fix potential use after free on xdp prog We should unregister the net_device first, before we give back our reference on xdp_prog. Otherwise xdp_prog may be freed before .ndo_stop() disabled the datapath. Found by code inspection. Fixes: ecd63a0217d5 ("nfp: add XDP support in the driver") Signed-off-by: Jakub Kicinski Reviewed-by: Simon Horman Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/nfp_net_common.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c index 9179a99563af..a41377e26c07 100644 --- a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c +++ b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c @@ -3275,9 +3275,10 @@ void nfp_net_netdev_clean(struct net_device *netdev) { struct nfp_net *nn = netdev_priv(netdev); + unregister_netdev(nn->netdev); + if (nn->xdp_prog) bpf_prog_put(nn->xdp_prog); if (nn->bpf_offload_xdp) nfp_net_xdp_offload(nn, NULL); - unregister_netdev(nn->netdev); } -- cgit v1.2.1 From 271a8b428f8361f3ad4c599835ccd34dd458b212 Mon Sep 17 00:00:00 2001 From: Bert Kenward Date: Wed, 12 Apr 2017 17:06:52 +0100 Subject: sfc: limit the number of receive queues The number of rx queues is determined by the rss_cpus parameter or the cpu topology. If that is higher than EFX_MAX_RX_QUEUES the driver can corrupt state. Fixes: 8ceee660aacb ("New driver "sfc" for Solarstorm SFC4000 controller.") Signed-off-by: Bert Kenward Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/efx.c | 7 +++++++ drivers/net/ethernet/sfc/falcon/efx.c | 7 +++++++ 2 files changed, 14 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c index 50d28261b6b9..b9cb697b2818 100644 --- a/drivers/net/ethernet/sfc/efx.c +++ b/drivers/net/ethernet/sfc/efx.c @@ -1371,6 +1371,13 @@ static unsigned int efx_wanted_parallelism(struct efx_nic *efx) free_cpumask_var(thread_mask); } + if (count > EFX_MAX_RX_QUEUES) { + netif_cond_dbg(efx, probe, efx->net_dev, !rss_cpus, warn, + "Reducing number of rx queues from %u to %u.\n", + count, EFX_MAX_RX_QUEUES); + count = EFX_MAX_RX_QUEUES; + } + /* If RSS is requested for the PF *and* VFs then we can't write RSS * table entries that are inaccessible to VFs */ diff --git a/drivers/net/ethernet/sfc/falcon/efx.c b/drivers/net/ethernet/sfc/falcon/efx.c index f5e5cd1659a1..29614da91cbf 100644 --- a/drivers/net/ethernet/sfc/falcon/efx.c +++ b/drivers/net/ethernet/sfc/falcon/efx.c @@ -1354,6 +1354,13 @@ static unsigned int ef4_wanted_parallelism(struct ef4_nic *efx) free_cpumask_var(thread_mask); } + if (count > EF4_MAX_RX_QUEUES) { + netif_cond_dbg(efx, probe, efx->net_dev, !rss_cpus, warn, + "Reducing number of rx queues from %u to %u.\n", + count, EF4_MAX_RX_QUEUES); + count = EF4_MAX_RX_QUEUES; + } + return count; } -- cgit v1.2.1 From b47a57a273fc0c1a922fe8b6a139881971e3d8de Mon Sep 17 00:00:00 2001 From: George Cherian Date: Thu, 13 Apr 2017 07:25:01 +0000 Subject: net: thunderx: Fix set_max_bgx_per_node for 81xx rgx Add the PCI_SUBSYS_DEVID_81XX_RGX and use the same to set the max bgx per node count. This fixes the issue intoduced by following commit 78aacb6f6 net: thunderx: Fix invalid mac addresses for node1 interfaces With this commit the max_bgx_per_node for 81xx is set as 2 instead of 3 because of which num_vfs is always calculated as zero. Signed-off-by: George Cherian Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/thunder/thunder_bgx.c | 1 + drivers/net/ethernet/cavium/thunder/thunder_bgx.h | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c index 64a1095e4d14..a0ca68ce3fbb 100644 --- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c +++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c @@ -134,6 +134,7 @@ static void set_max_bgx_per_node(struct pci_dev *pdev) pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &sdevid); switch (sdevid) { case PCI_SUBSYS_DEVID_81XX_BGX: + case PCI_SUBSYS_DEVID_81XX_RGX: max_bgx_per_node = MAX_BGX_PER_CN81XX; break; case PCI_SUBSYS_DEVID_83XX_BGX: diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.h b/drivers/net/ethernet/cavium/thunder/thunder_bgx.h index c5080f2cead5..6b7fe6fdd13b 100644 --- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.h +++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.h @@ -16,6 +16,7 @@ /* Subsystem device IDs */ #define PCI_SUBSYS_DEVID_88XX_BGX 0xA126 #define PCI_SUBSYS_DEVID_81XX_BGX 0xA226 +#define PCI_SUBSYS_DEVID_81XX_RGX 0xA254 #define PCI_SUBSYS_DEVID_83XX_BGX 0xA326 #define MAX_BGX_THUNDER 8 /* Max 2 nodes, 4 per node */ -- cgit v1.2.1 From 81d2dd09ca11a2b834c8a915c6aabf8325d57ecf Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Fri, 14 Apr 2017 11:19:11 +0800 Subject: net: ethernet: mediatek: fix inconsistency between TXD and the used buffer Fix inconsistency between the TXD descriptor and the used buffer that would cause unexpected logic at mtk_tx_unmap() during skb housekeeping. Signed-off-by: Sean Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 9e757684816d..50a6fe87e990 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -613,7 +613,7 @@ static int mtk_tx_map(struct sk_buff *skb, struct net_device *dev, struct mtk_mac *mac = netdev_priv(dev); struct mtk_eth *eth = mac->hw; struct mtk_tx_dma *itxd, *txd; - struct mtk_tx_buf *tx_buf; + struct mtk_tx_buf *itx_buf, *tx_buf; dma_addr_t mapped_addr; unsigned int nr_frags; int i, n_desc = 1; @@ -627,8 +627,8 @@ static int mtk_tx_map(struct sk_buff *skb, struct net_device *dev, fport = (mac->id + 1) << TX_DMA_FPORT_SHIFT; txd4 |= fport; - tx_buf = mtk_desc_to_tx_buf(ring, itxd); - memset(tx_buf, 0, sizeof(*tx_buf)); + itx_buf = mtk_desc_to_tx_buf(ring, itxd); + memset(itx_buf, 0, sizeof(*itx_buf)); if (gso) txd4 |= TX_DMA_TSO; @@ -647,9 +647,9 @@ static int mtk_tx_map(struct sk_buff *skb, struct net_device *dev, return -ENOMEM; WRITE_ONCE(itxd->txd1, mapped_addr); - tx_buf->flags |= MTK_TX_FLAGS_SINGLE0; - dma_unmap_addr_set(tx_buf, dma_addr0, mapped_addr); - dma_unmap_len_set(tx_buf, dma_len0, skb_headlen(skb)); + itx_buf->flags |= MTK_TX_FLAGS_SINGLE0; + dma_unmap_addr_set(itx_buf, dma_addr0, mapped_addr); + dma_unmap_len_set(itx_buf, dma_len0, skb_headlen(skb)); /* TX SG offload */ txd = itxd; @@ -685,10 +685,9 @@ static int mtk_tx_map(struct sk_buff *skb, struct net_device *dev, last_frag * TX_DMA_LS0)); WRITE_ONCE(txd->txd4, fport); - tx_buf->skb = (struct sk_buff *)MTK_DMA_DUMMY_DESC; tx_buf = mtk_desc_to_tx_buf(ring, txd); memset(tx_buf, 0, sizeof(*tx_buf)); - + tx_buf->skb = (struct sk_buff *)MTK_DMA_DUMMY_DESC; tx_buf->flags |= MTK_TX_FLAGS_PAGE0; dma_unmap_addr_set(tx_buf, dma_addr0, mapped_addr); dma_unmap_len_set(tx_buf, dma_len0, frag_map_size); @@ -698,7 +697,7 @@ static int mtk_tx_map(struct sk_buff *skb, struct net_device *dev, } /* store skb to cleanup */ - tx_buf->skb = skb; + itx_buf->skb = skb; WRITE_ONCE(itxd->txd4, txd4); WRITE_ONCE(itxd->txd3, (TX_DMA_SWC | TX_DMA_PLEN0(skb_headlen(skb)) | -- cgit v1.2.1 From 134d21525f5f7c89f1f6ce052a11ac09dc27b331 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Fri, 14 Apr 2017 11:19:12 +0800 Subject: net: ethernet: mediatek: fix inconsistency of port number carried in TXD Fix port inconsistency on TXD due to hardware BUG that would cause different port number is carried on the same TXD between tx_map() and tx_unmap() with the iperf test. It would cause confusing BQL logic which leads to kernel panic when dual GMAC runs concurrently. Signed-off-by: Sean Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 14 +++++++++----- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 12 +++++++++--- 2 files changed, 18 insertions(+), 8 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 50a6fe87e990..93949139e62c 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -648,6 +648,8 @@ static int mtk_tx_map(struct sk_buff *skb, struct net_device *dev, WRITE_ONCE(itxd->txd1, mapped_addr); itx_buf->flags |= MTK_TX_FLAGS_SINGLE0; + itx_buf->flags |= (!mac->id) ? MTK_TX_FLAGS_FPORT0 : + MTK_TX_FLAGS_FPORT1; dma_unmap_addr_set(itx_buf, dma_addr0, mapped_addr); dma_unmap_len_set(itx_buf, dma_len0, skb_headlen(skb)); @@ -689,6 +691,9 @@ static int mtk_tx_map(struct sk_buff *skb, struct net_device *dev, memset(tx_buf, 0, sizeof(*tx_buf)); tx_buf->skb = (struct sk_buff *)MTK_DMA_DUMMY_DESC; tx_buf->flags |= MTK_TX_FLAGS_PAGE0; + tx_buf->flags |= (!mac->id) ? MTK_TX_FLAGS_FPORT0 : + MTK_TX_FLAGS_FPORT1; + dma_unmap_addr_set(tx_buf, dma_addr0, mapped_addr); dma_unmap_len_set(tx_buf, dma_len0, frag_map_size); frag_size -= frag_map_size; @@ -1011,17 +1016,16 @@ static int mtk_poll_tx(struct mtk_eth *eth, int budget) while ((cpu != dma) && budget) { u32 next_cpu = desc->txd2; - int mac; + int mac = 0; desc = mtk_qdma_phys_to_virt(ring, desc->txd2); if ((desc->txd3 & TX_DMA_OWNER_CPU) == 0) break; - mac = (desc->txd4 >> TX_DMA_FPORT_SHIFT) & - TX_DMA_FPORT_MASK; - mac--; - tx_buf = mtk_desc_to_tx_buf(ring, desc); + if (tx_buf->flags & MTK_TX_FLAGS_FPORT1) + mac = 1; + skb = tx_buf->skb; if (!skb) { condition = 1; diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h index 99b1c8e9f16f..08285a96ff70 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h @@ -406,12 +406,18 @@ struct mtk_hw_stats { struct u64_stats_sync syncp; }; -/* PDMA descriptor can point at 1-2 segments. This enum allows us to track how - * memory was allocated so that it can be freed properly - */ enum mtk_tx_flags { + /* PDMA descriptor can point at 1-2 segments. This enum allows us to + * track how memory was allocated so that it can be freed properly. + */ MTK_TX_FLAGS_SINGLE0 = 0x01, MTK_TX_FLAGS_PAGE0 = 0x02, + + /* MTK_TX_FLAGS_FPORTx allows tracking which port the transmitted + * SKB out instead of looking up through hardware TX descriptor. + */ + MTK_TX_FLAGS_FPORT0 = 0x04, + MTK_TX_FLAGS_FPORT1 = 0x08, }; /* This enum allows us to identify how the clock is defined on the array of the -- cgit v1.2.1 From 1debdc8f9ebd07daf140e417b3841596911e0066 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 17 Apr 2017 15:55:22 +0300 Subject: sh_eth: unmap DMA buffers when freeing rings The DMA API debugging (when enabled) causes: WARNING: CPU: 0 PID: 1445 at lib/dma-debug.c:519 add_dma_entry+0xe0/0x12c DMA-API: exceeded 7 overlapping mappings of cacheline 0x01b2974d to be printed after repeated initialization of the Ether device, e.g. suspend/resume or 'ifconfig' up/down. This is because DMA buffers mapped using dma_map_single() in sh_eth_ring_format() and sh_eth_start_xmit() are never unmapped. Resolve this problem by unmapping the buffers when freeing the descriptor rings; in order to do it right, we'd have to add an extra parameter to sh_eth_txfree() (we rename this function to sh_eth_tx_free(), while at it). Based on the commit a47b70ea86bd ("ravb: unmap descriptors when freeing rings"). Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 122 +++++++++++++++++++--------------- 1 file changed, 67 insertions(+), 55 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 54248775f227..f68c4db656ed 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -1127,12 +1127,70 @@ static struct mdiobb_ops bb_ops = { .get_mdio_data = sh_get_mdio, }; +/* free Tx skb function */ +static int sh_eth_tx_free(struct net_device *ndev, bool sent_only) +{ + struct sh_eth_private *mdp = netdev_priv(ndev); + struct sh_eth_txdesc *txdesc; + int free_num = 0; + int entry; + bool sent; + + for (; mdp->cur_tx - mdp->dirty_tx > 0; mdp->dirty_tx++) { + entry = mdp->dirty_tx % mdp->num_tx_ring; + txdesc = &mdp->tx_ring[entry]; + sent = !(txdesc->status & cpu_to_le32(TD_TACT)); + if (sent_only && !sent) + break; + /* TACT bit must be checked before all the following reads */ + dma_rmb(); + netif_info(mdp, tx_done, ndev, + "tx entry %d status 0x%08x\n", + entry, le32_to_cpu(txdesc->status)); + /* Free the original skb. */ + if (mdp->tx_skbuff[entry]) { + dma_unmap_single(&ndev->dev, le32_to_cpu(txdesc->addr), + le32_to_cpu(txdesc->len) >> 16, + DMA_TO_DEVICE); + dev_kfree_skb_irq(mdp->tx_skbuff[entry]); + mdp->tx_skbuff[entry] = NULL; + free_num++; + } + txdesc->status = cpu_to_le32(TD_TFP); + if (entry >= mdp->num_tx_ring - 1) + txdesc->status |= cpu_to_le32(TD_TDLE); + + if (sent) { + ndev->stats.tx_packets++; + ndev->stats.tx_bytes += le32_to_cpu(txdesc->len) >> 16; + } + } + return free_num; +} + /* free skb and descriptor buffer */ static void sh_eth_ring_free(struct net_device *ndev) { struct sh_eth_private *mdp = netdev_priv(ndev); int ringsize, i; + if (mdp->rx_ring) { + for (i = 0; i < mdp->num_rx_ring; i++) { + if (mdp->rx_skbuff[i]) { + struct sh_eth_rxdesc *rxdesc = &mdp->rx_ring[i]; + + dma_unmap_single(&ndev->dev, + le32_to_cpu(rxdesc->addr), + ALIGN(mdp->rx_buf_sz, 32), + DMA_FROM_DEVICE); + } + } + ringsize = sizeof(struct sh_eth_rxdesc) * mdp->num_rx_ring; + dma_free_coherent(NULL, ringsize, mdp->rx_ring, + mdp->rx_desc_dma); + mdp->rx_ring = NULL; + } + /* Free Rx skb ringbuffer */ if (mdp->rx_skbuff) { for (i = 0; i < mdp->num_rx_ring; i++) @@ -1141,27 +1199,18 @@ static void sh_eth_ring_free(struct net_device *ndev) kfree(mdp->rx_skbuff); mdp->rx_skbuff = NULL; - /* Free Tx skb ringbuffer */ - if (mdp->tx_skbuff) { - for (i = 0; i < mdp->num_tx_ring; i++) - dev_kfree_skb(mdp->tx_skbuff[i]); - } - kfree(mdp->tx_skbuff); - mdp->tx_skbuff = NULL; - - if (mdp->rx_ring) { - ringsize = sizeof(struct sh_eth_rxdesc) * mdp->num_rx_ring; - dma_free_coherent(NULL, ringsize, mdp->rx_ring, - mdp->rx_desc_dma); - mdp->rx_ring = NULL; - } - if (mdp->tx_ring) { + sh_eth_tx_free(ndev, false); + ringsize = sizeof(struct sh_eth_txdesc) * mdp->num_tx_ring; dma_free_coherent(NULL, ringsize, mdp->tx_ring, mdp->tx_desc_dma); mdp->tx_ring = NULL; } + + /* Free Tx skb ringbuffer */ + kfree(mdp->tx_skbuff); + mdp->tx_skbuff = NULL; } /* format skb and descriptor buffer */ @@ -1409,43 +1458,6 @@ static void sh_eth_dev_exit(struct net_device *ndev) update_mac_address(ndev); } -/* free Tx skb function */ -static int sh_eth_txfree(struct net_device *ndev) -{ - struct sh_eth_private *mdp = netdev_priv(ndev); - struct sh_eth_txdesc *txdesc; - int free_num = 0; - int entry; - - for (; mdp->cur_tx - mdp->dirty_tx > 0; mdp->dirty_tx++) { - entry = mdp->dirty_tx % mdp->num_tx_ring; - txdesc = &mdp->tx_ring[entry]; - if (txdesc->status & cpu_to_le32(TD_TACT)) - break; - /* TACT bit must be checked before all the following reads */ - dma_rmb(); - netif_info(mdp, tx_done, ndev, - "tx entry %d status 0x%08x\n", - entry, le32_to_cpu(txdesc->status)); - /* Free the original skb. */ - if (mdp->tx_skbuff[entry]) { - dma_unmap_single(&ndev->dev, le32_to_cpu(txdesc->addr), - le32_to_cpu(txdesc->len) >> 16, - DMA_TO_DEVICE); - dev_kfree_skb_irq(mdp->tx_skbuff[entry]); - mdp->tx_skbuff[entry] = NULL; - free_num++; - } - txdesc->status = cpu_to_le32(TD_TFP); - if (entry >= mdp->num_tx_ring - 1) - txdesc->status |= cpu_to_le32(TD_TDLE); - - ndev->stats.tx_packets++; - ndev->stats.tx_bytes += le32_to_cpu(txdesc->len) >> 16; - } - return free_num; -} - /* Packet receive function */ static int sh_eth_rx(struct net_device *ndev, u32 intr_status, int *quota) { @@ -1690,7 +1702,7 @@ static void sh_eth_error(struct net_device *ndev, u32 intr_status) intr_status, mdp->cur_tx, mdp->dirty_tx, (u32)ndev->state, edtrr); /* dirty buffer free */ - sh_eth_txfree(ndev); + sh_eth_tx_free(ndev, true); /* SH7712 BUG */ if (edtrr ^ sh_eth_get_edtrr_trns(mdp)) { @@ -1751,7 +1763,7 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev) /* Clear Tx interrupts */ sh_eth_write(ndev, intr_status & cd->tx_check, EESR); - sh_eth_txfree(ndev); + sh_eth_tx_free(ndev, true); netif_wake_queue(ndev); } @@ -2412,7 +2424,7 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev) spin_lock_irqsave(&mdp->lock, flags); if ((mdp->cur_tx - mdp->dirty_tx) >= (mdp->num_tx_ring - 4)) { - if (!sh_eth_txfree(ndev)) { + if (!sh_eth_tx_free(ndev, true)) { netif_warn(mdp, tx_queued, ndev, "TxFD exhausted.\n"); netif_stop_queue(ndev); spin_unlock_irqrestore(&mdp->lock, flags); -- cgit v1.2.1 From 66367dab30c7040e638e5496a47184cfc8ba39a4 Mon Sep 17 00:00:00 2001 From: "sudarsana.kalluru@cavium.com" Date: Wed, 19 Apr 2017 03:19:52 -0700 Subject: qed: Fix possible error in populating max_tc field. Some adapters may not publish the max_tc value. Populate the default value for max_tc field in case the mfw didn't provide one. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c index 5bd36a4a8fcd..c24436c911f3 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c @@ -583,6 +583,13 @@ qed_dcbx_get_ets_data(struct qed_hwfn *p_hwfn, p_params->ets_cbs, p_ets->pri_tc_tbl[0], p_params->max_ets_tc); + if (p_params->ets_enabled && !p_params->max_ets_tc) { + p_params->max_ets_tc = QED_MAX_PFC_PRIORITIES; + DP_VERBOSE(p_hwfn, QED_MSG_DCB, + "ETS params: max_ets_tc is forced to %d\n", + p_params->max_ets_tc); + } + /* 8 bit tsa and bw data corresponding to each of the 8 TC's are * encoded in a type u32 array of size 2. */ -- cgit v1.2.1 From 6cf75f1cebb048cfc1424b4b8ac9bbc08d5f9f66 Mon Sep 17 00:00:00 2001 From: "sudarsana.kalluru@cavium.com" Date: Wed, 19 Apr 2017 03:19:53 -0700 Subject: qed: Fix sending an invalid PFC error mask to MFW. PFC error-mask value is not supported by MFW, but this bit could be set in the pfc bit-map of the operational parameters if remote device supports it. These operational parameters are used as basis for populating the dcbx config parameters. User provided configs will be applied on top of these parameters and then send them to MFW when requested. Driver need to clear the error-mask bit before sending the config parameters to MFW. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c index c24436c911f3..ff058a380003 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c @@ -1008,6 +1008,8 @@ qed_dcbx_set_pfc_data(struct qed_hwfn *p_hwfn, u8 pfc_map = 0; int i; + *pfc &= ~DCBX_PFC_ERROR_MASK; + if (p_params->pfc.willing) *pfc |= DCBX_PFC_WILLING_MASK; else -- cgit v1.2.1 From 62289ba27558553871fd047baadaaeda886c6a63 Mon Sep 17 00:00:00 2001 From: "sudarsana.kalluru@cavium.com" Date: Wed, 19 Apr 2017 03:19:54 -0700 Subject: qed: Fix possible system hang in the dcbnl-getdcbx() path. qed_dcbnl_get_dcbx() API uses kmalloc in GFT_KERNEL mode. The API gets invoked in the interrupt context by qed_dcbnl_getdcbx callback. Need to invoke this kmalloc in atomic mode. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c index ff058a380003..8f0783a62953 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c @@ -1264,7 +1264,7 @@ static struct qed_dcbx_get *qed_dcbnl_get_dcbx(struct qed_hwfn *hwfn, { struct qed_dcbx_get *dcbx_info; - dcbx_info = kzalloc(sizeof(*dcbx_info), GFP_KERNEL); + dcbx_info = kmalloc(sizeof(*dcbx_info), GFP_ATOMIC); if (!dcbx_info) return NULL; -- cgit v1.2.1 From c0c5dbe711c7d642415359ef5d216896a15a434b Mon Sep 17 00:00:00 2001 From: "sudarsana.kalluru@cavium.com" Date: Wed, 19 Apr 2017 03:19:55 -0700 Subject: qed: Fix issue in populating the PFC config paramters. Change ieee_setpfc() callback implementation to populate traffic class count with the user provided value. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c index 8f0783a62953..a6e2bbe629bd 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c @@ -2082,6 +2082,8 @@ static int qed_dcbnl_ieee_setpfc(struct qed_dev *cdev, struct ieee_pfc *pfc) for (i = 0; i < QED_MAX_PFC_PRIORITIES; i++) dcbx_set.config.params.pfc.prio[i] = !!(pfc->pfc_en & BIT(i)); + dcbx_set.config.params.pfc.max_tc = pfc->pfc_cap; + ptt = qed_ptt_acquire(hwfn); if (!ptt) return -EINVAL; -- cgit v1.2.1