From 64e711ca59ef9b7873d77ef06bc174aa01af9115 Mon Sep 17 00:00:00 2001 From: Amritha Nambiar Date: Fri, 17 Nov 2017 15:51:47 -0800 Subject: i40e: Remove UDP support for big buffer Since UDP based filters are not supported via big buffer cloud filters, remove UDP support. Also change a few return types to indicate unsupported vs invalid configuration. Signed-off-by: Amritha Nambiar Acked-by: Alexander Duyck Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_main.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers/net/ethernet/intel') diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 321d8be80871..fffd4868defb 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -6038,8 +6038,8 @@ static int i40e_validate_and_set_switch_mode(struct i40e_vsi *vsi) /* Set Bit 7 to be valid */ mode = I40E_AQ_SET_SWITCH_BIT7_VALID; - /* Set L4type to both TCP and UDP support */ - mode |= I40E_AQ_SET_SWITCH_L4_TYPE_BOTH; + /* Set L4type for TCP support */ + mode |= I40E_AQ_SET_SWITCH_L4_TYPE_TCP; /* Set cloud filter mode */ mode |= I40E_AQ_SET_SWITCH_MODE_NON_TUNNEL; @@ -6969,18 +6969,18 @@ static int i40e_add_del_cloud_filter_big_buf(struct i40e_vsi *vsi, is_valid_ether_addr(filter->src_mac)) || (is_multicast_ether_addr(filter->dst_mac) && is_multicast_ether_addr(filter->src_mac))) - return -EINVAL; + return -EOPNOTSUPP; - /* Make sure port is specified, otherwise bail out, for channel - * specific cloud filter needs 'L4 port' to be non-zero + /* Big buffer cloud filter needs 'L4 port' to be non-zero. Also, UDP + * ports are not supported via big buffer now. */ - if (!filter->dst_port) - return -EINVAL; + if (!filter->dst_port || filter->ip_proto == IPPROTO_UDP) + return -EOPNOTSUPP; /* adding filter using src_port/src_ip is not supported at this stage */ if (filter->src_port || filter->src_ipv4 || !ipv6_addr_any(&filter->ip.v6.src_ip6)) - return -EINVAL; + return -EOPNOTSUPP; /* copy element needed to add cloud filter from filter */ i40e_set_cld_element(filter, &cld_filter.element); @@ -6991,7 +6991,7 @@ static int i40e_add_del_cloud_filter_big_buf(struct i40e_vsi *vsi, is_multicast_ether_addr(filter->src_mac)) { /* MAC + IP : unsupported mode */ if (filter->dst_ipv4) - return -EINVAL; + return -EOPNOTSUPP; /* since we validated that L4 port must be valid before * we get here, start with respective "flags" value -- cgit v1.2.1 From 248de22e638f10bd5bfc7624a357f940f66ba137 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Fri, 8 Dec 2017 10:55:04 -0800 Subject: i40e/i40evf: Account for frags split over multiple descriptors in check linearize The original code for __i40e_chk_linearize didn't take into account the fact that if a fragment is 16K in size or larger it has to be split over 2 descriptors and the smaller of those 2 descriptors will be on the trailing edge of the transmit. As a result we can get into situations where we didn't catch requests that could result in a Tx hang. This patch takes care of that by subtracting the length of all but the trailing edge of the stale fragment before we test for sum. By doing this we can guarantee that we have all cases covered, including the case of a fragment that spans multiple descriptors. We don't need to worry about checking the inner portions of this since 12K is the maximum aligned DMA size and that is larger than any MSS will ever be since the MTU limit for jumbos is something on the order of 9K. Signed-off-by: Alexander Duyck Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 26 +++++++++++++++++++++++--- drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 26 +++++++++++++++++++++++--- 2 files changed, 46 insertions(+), 6 deletions(-) (limited to 'drivers/net/ethernet/intel') diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index 4566d66ffc7c..5bc2748ac468 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -3047,10 +3047,30 @@ bool __i40e_chk_linearize(struct sk_buff *skb) /* Walk through fragments adding latest fragment, testing it, and * then removing stale fragments from the sum. */ - stale = &skb_shinfo(skb)->frags[0]; - for (;;) { + for (stale = &skb_shinfo(skb)->frags[0];; stale++) { + int stale_size = skb_frag_size(stale); + sum += skb_frag_size(frag++); + /* The stale fragment may present us with a smaller + * descriptor than the actual fragment size. To account + * for that we need to remove all the data on the front and + * figure out what the remainder would be in the last + * descriptor associated with the fragment. + */ + if (stale_size > I40E_MAX_DATA_PER_TXD) { + int align_pad = -(stale->page_offset) & + (I40E_MAX_READ_REQ_SIZE - 1); + + sum -= align_pad; + stale_size -= align_pad; + + do { + sum -= I40E_MAX_DATA_PER_TXD_ALIGNED; + stale_size -= I40E_MAX_DATA_PER_TXD_ALIGNED; + } while (stale_size > I40E_MAX_DATA_PER_TXD); + } + /* if sum is negative we failed to make sufficient progress */ if (sum < 0) return true; @@ -3058,7 +3078,7 @@ bool __i40e_chk_linearize(struct sk_buff *skb) if (!nr_frags--) break; - sum -= skb_frag_size(stale++); + sum -= stale_size; } return false; diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c index 50864f99446d..1ba29bb85b67 100644 --- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c @@ -2012,10 +2012,30 @@ bool __i40evf_chk_linearize(struct sk_buff *skb) /* Walk through fragments adding latest fragment, testing it, and * then removing stale fragments from the sum. */ - stale = &skb_shinfo(skb)->frags[0]; - for (;;) { + for (stale = &skb_shinfo(skb)->frags[0];; stale++) { + int stale_size = skb_frag_size(stale); + sum += skb_frag_size(frag++); + /* The stale fragment may present us with a smaller + * descriptor than the actual fragment size. To account + * for that we need to remove all the data on the front and + * figure out what the remainder would be in the last + * descriptor associated with the fragment. + */ + if (stale_size > I40E_MAX_DATA_PER_TXD) { + int align_pad = -(stale->page_offset) & + (I40E_MAX_READ_REQ_SIZE - 1); + + sum -= align_pad; + stale_size -= align_pad; + + do { + sum -= I40E_MAX_DATA_PER_TXD_ALIGNED; + stale_size -= I40E_MAX_DATA_PER_TXD_ALIGNED; + } while (stale_size > I40E_MAX_DATA_PER_TXD); + } + /* if sum is negative we failed to make sufficient progress */ if (sum < 0) return true; @@ -2023,7 +2043,7 @@ bool __i40evf_chk_linearize(struct sk_buff *skb) if (!nr_frags--) break; - sum -= skb_frag_size(stale++); + sum -= stale_size; } return false; -- cgit v1.2.1 From 458867b2ca0c987445c5d9adccd1642970e1ba07 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Wed, 20 Dec 2017 11:04:36 -0500 Subject: i40e: don't remove netdev->dev_addr when syncing uc list In some circumstances, such as with bridging, it is possible that the stack will add a devices own MAC address to its unicast address list. If, later, the stack deletes this address, then the i40e driver will receive a request to remove this address. The driver stores its current MAC address as part of the MAC/VLAN hash array, since it is convenient and matches exactly how the hardware expects to be told which traffic to receive. This causes a problem, since for more devices, the MAC address is stored separately, and requests to delete a unicast address should not have the ability to remove the filter for the MAC address. Fix this by forcing a check on every address sync to ensure we do not remove the device address. There is a very narrow possibility of a race between .set_mac and .set_rx_mode, if we don't change netdev->dev_addr before updating our internal MAC list in .set_mac. This might be possible if .set_rx_mode is going to remove MAC "XYZ" from the list, at the same time as .set_mac changes our dev_addr to MAC "XYZ", we might possibly queue a delete, then an add in .set_mac, then queue a delete in .set_rx_mode's dev_uc_sync and then update netdev->dev_addr. We can avoid this by moving the copy into dev_addr prior to the changes to the MAC filter list. A similar race on the other side does not cause problems, as if we're changing our MAC form A to B, and we race with .set_rx_mode, it could queue a delete from A, we'd update our address, and allow the delete. This seems like a race, but in reality we're about to queue a delete of A anyways, so it would not cause any issues. A race in the initialization code is unlikely because the netdevice has not yet been fully initialized and the stack should not be adding or removing addresses yet. Note that we don't (yet) need similar code for the VF driver because it does not make use of __dev_uc_sync and __dev_mc_sync, but instead roles its own method for handling updates to the MAC/VLAN list, which already has code to protect against removal of the hardware address. Signed-off-by: Jacob Keller Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_main.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) (limited to 'drivers/net/ethernet/intel') diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index fffd4868defb..9e4b78e447f8 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -1573,11 +1573,18 @@ static int i40e_set_mac(struct net_device *netdev, void *p) else netdev_info(netdev, "set new mac address %pM\n", addr->sa_data); + /* Copy the address first, so that we avoid a possible race with + * .set_rx_mode(). If we copy after changing the address in the filter + * list, we might open ourselves to a narrow race window where + * .set_rx_mode could delete our dev_addr filter and prevent traffic + * from passing. + */ + ether_addr_copy(netdev->dev_addr, addr->sa_data); + spin_lock_bh(&vsi->mac_filter_hash_lock); i40e_del_mac_filter(vsi, netdev->dev_addr); i40e_add_mac_filter(vsi, addr->sa_data); spin_unlock_bh(&vsi->mac_filter_hash_lock); - ether_addr_copy(netdev->dev_addr, addr->sa_data); if (vsi->type == I40E_VSI_MAIN) { i40e_status ret; @@ -1923,6 +1930,14 @@ static int i40e_addr_unsync(struct net_device *netdev, const u8 *addr) struct i40e_netdev_priv *np = netdev_priv(netdev); struct i40e_vsi *vsi = np->vsi; + /* Under some circumstances, we might receive a request to delete + * our own device address from our uc list. Because we store the + * device address in the VSI's MAC/VLAN filter list, we need to ignore + * such requests and not delete our device address from this list. + */ + if (ether_addr_equal(addr, netdev->dev_addr)) + return 0; + i40e_del_mac_filter(vsi, addr); return 0; -- cgit v1.2.1 From bc4244c6e33f96b48c4986ce4653df4673c6a08e Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Fri, 22 Dec 2017 12:45:16 +0100 Subject: i40e: flower: Fix return value for unsupported offload When filter configuration is not supported, drivers should return -EOPNOTSUPP so the core can react correctly. Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower") Signed-off-by: Jiri Pirko Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet/intel') diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 9e4b78e447f8..42dcaefc4c19 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -7371,7 +7371,7 @@ static int i40e_configure_clsflower(struct i40e_vsi *vsi, if (tc < 0) { dev_err(&vsi->back->pdev->dev, "Invalid traffic class\n"); - return -EINVAL; + return -EOPNOTSUPP; } if (test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state) || -- cgit v1.2.1