From 34eb9751ea8285c7732991a09cb8729d624f6245 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 27 Nov 2017 10:10:28 -0500 Subject: media: drxj and drxk: don't produce kernel-doc warnings Those drivers use a different notation for comments. While it is not worth converting to kernel-doc, removing it is also not an option. So, just replace /** by /* and be happy :-) Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb-frontends/drx39xyj/drxj.c | 248 ++++++++++++++-------------- 1 file changed, 124 insertions(+), 124 deletions(-) (limited to 'drivers/media/dvb-frontends/drx39xyj') diff --git a/drivers/media/dvb-frontends/drx39xyj/drxj.c b/drivers/media/dvb-frontends/drx39xyj/drxj.c index 499ccff557bf..8cbd8cc21059 100644 --- a/drivers/media/dvb-frontends/drx39xyj/drxj.c +++ b/drivers/media/dvb-frontends/drx39xyj/drxj.c @@ -73,7 +73,7 @@ INCLUDE FILES #define DRX39XX_MAIN_FIRMWARE "dvb-fe-drxj-mc-1.0.8.fw" -/** +/* * \brief Maximum u32 value. */ #ifndef MAX_U32 @@ -100,8 +100,8 @@ INCLUDE FILES #ifndef OOB_DRX_DRIVE_STRENGTH #define OOB_DRX_DRIVE_STRENGTH 0x02 #endif -/**** START DJCOMBO patches to DRXJ registermap constants *********************/ -/**** registermap 200706071303 from drxj **************************************/ +/*** START DJCOMBO patches to DRXJ registermap constants *********************/ +/*** registermap 200706071303 from drxj **************************************/ #define ATV_TOP_CR_AMP_TH_FM 0x0 #define ATV_TOP_CR_AMP_TH_L 0xA #define ATV_TOP_CR_AMP_TH_LP 0xA @@ -188,7 +188,7 @@ INCLUDE FILES #define IQM_RC_ADJ_SEL_B_OFF 0x0 #define IQM_RC_ADJ_SEL_B_QAM 0x1 #define IQM_RC_ADJ_SEL_B_VSB 0x2 -/**** END DJCOMBO patches to DRXJ registermap *********************************/ +/*** END DJCOMBO patches to DRXJ registermap *********************************/ #include "drx_driver_version.h" @@ -208,25 +208,25 @@ DEFINES #define DRXJ_WAKE_UP_KEY (demod->my_i2c_dev_addr->i2c_addr) #endif -/** +/* * \def DRXJ_DEF_I2C_ADDR * \brief Default I2C address of a demodulator instance. */ #define DRXJ_DEF_I2C_ADDR (0x52) -/** +/* * \def DRXJ_DEF_DEMOD_DEV_ID * \brief Default device identifier of a demodultor instance. */ #define DRXJ_DEF_DEMOD_DEV_ID (1) -/** +/* * \def DRXJ_SCAN_TIMEOUT * \brief Timeout value for waiting on demod lock during channel scan (millisec). */ #define DRXJ_SCAN_TIMEOUT 1000 -/** +/* * \def HI_I2C_DELAY * \brief HI timing delay for I2C timing (in nano seconds) * @@ -234,7 +234,7 @@ DEFINES */ #define HI_I2C_DELAY 42 -/** +/* * \def HI_I2C_BRIDGE_DELAY * \brief HI timing delay for I2C timing (in nano seconds) * @@ -242,13 +242,13 @@ DEFINES */ #define HI_I2C_BRIDGE_DELAY 750 -/** +/* * \brief Time Window for MER and SER Measurement in Units of Segment duration. */ #define VSB_TOP_MEASUREMENT_PERIOD 64 #define SYMBOLS_PER_SEGMENT 832 -/** +/* * \brief bit rate and segment rate constants used for SER and BER. */ /* values taken from the QAM microcode */ @@ -260,21 +260,21 @@ DEFINES #define DRXJ_QAM_SL_SIG_POWER_QAM64 43008 #define DRXJ_QAM_SL_SIG_POWER_QAM128 20992 #define DRXJ_QAM_SL_SIG_POWER_QAM256 43520 -/** +/* * \brief Min supported symbolrates. */ #ifndef DRXJ_QAM_SYMBOLRATE_MIN #define DRXJ_QAM_SYMBOLRATE_MIN (520000) #endif -/** +/* * \brief Max supported symbolrates. */ #ifndef DRXJ_QAM_SYMBOLRATE_MAX #define DRXJ_QAM_SYMBOLRATE_MAX (7233000) #endif -/** +/* * \def DRXJ_QAM_MAX_WAITTIME * \brief Maximal wait time for QAM auto constellation in ms */ @@ -290,7 +290,7 @@ DEFINES #define DRXJ_QAM_DEMOD_LOCK_EXT_WAITTIME 200 #endif -/** +/* * \def SCU status and results * \brief SCU */ @@ -299,7 +299,7 @@ DEFINES #define FEC_RS_MEASUREMENT_PERIOD 12894 /* 1 sec */ #define FEC_RS_MEASUREMENT_PRESCALE 1 /* n sec */ -/** +/* * \def DRX_AUD_MAX_DEVIATION * \brief Needed for calculation of prescale feature in AUD */ @@ -307,14 +307,14 @@ DEFINES #define DRXJ_AUD_MAX_FM_DEVIATION 100 /* kHz */ #endif -/** +/* * \brief Needed for calculation of NICAM prescale feature in AUD */ #ifndef DRXJ_AUD_MAX_NICAM_PRESCALE #define DRXJ_AUD_MAX_NICAM_PRESCALE (9) /* dB */ #endif -/** +/* * \brief Needed for calculation of NICAM prescale feature in AUD */ #ifndef DRXJ_AUD_MAX_WAITTIME @@ -371,21 +371,21 @@ DEFINES /*============================================================================*/ /*=== GLOBAL VARIABLEs =======================================================*/ /*============================================================================*/ -/** +/* */ -/** +/* * \brief Temporary register definitions. * (register definitions that are not yet available in register master) */ -/******************************************************************************/ +/*****************************************************************************/ /* Audio block 0x103 is write only. To avoid shadowing in driver accessing */ /* RAM adresses directly. This must be READ ONLY to avoid problems. */ /* Writing to the interface adresses is more than only writing the RAM */ /* locations */ -/******************************************************************************/ -/** +/*****************************************************************************/ +/* * \brief RAM location of MODUS registers */ #define AUD_DEM_RAM_MODUS_HI__A 0x10204A3 @@ -394,13 +394,13 @@ DEFINES #define AUD_DEM_RAM_MODUS_LO__A 0x10204A4 #define AUD_DEM_RAM_MODUS_LO__M 0x0FFF -/** +/* * \brief RAM location of I2S config registers */ #define AUD_DEM_RAM_I2S_CONFIG1__A 0x10204B1 #define AUD_DEM_RAM_I2S_CONFIG2__A 0x10204B2 -/** +/* * \brief RAM location of DCO config registers */ #define AUD_DEM_RAM_DCO_B_HI__A 0x1020461 @@ -408,20 +408,20 @@ DEFINES #define AUD_DEM_RAM_DCO_A_HI__A 0x1020463 #define AUD_DEM_RAM_DCO_A_LO__A 0x1020464 -/** +/* * \brief RAM location of Threshold registers */ #define AUD_DEM_RAM_NICAM_THRSHLD__A 0x102045A #define AUD_DEM_RAM_A2_THRSHLD__A 0x10204BB #define AUD_DEM_RAM_BTSC_THRSHLD__A 0x10204A6 -/** +/* * \brief RAM location of Carrier Threshold registers */ #define AUD_DEM_RAM_CM_A_THRSHLD__A 0x10204AF #define AUD_DEM_RAM_CM_B_THRSHLD__A 0x10204B0 -/** +/* * \brief FM Matrix register fix */ #ifdef AUD_DEM_WR_FM_MATRIX__A @@ -430,7 +430,7 @@ DEFINES #define AUD_DEM_WR_FM_MATRIX__A 0x105006F /*============================================================================*/ -/** +/* * \brief Defines required for audio */ #define AUD_VOLUME_ZERO_DB 115 @@ -443,14 +443,14 @@ DEFINES #define AUD_I2S_FREQUENCY_MIN 12000UL #define AUD_RDS_ARRAY_SIZE 18 -/** +/* * \brief Needed for calculation of prescale feature in AUD */ #ifndef DRX_AUD_MAX_FM_DEVIATION #define DRX_AUD_MAX_FM_DEVIATION (100) /* kHz */ #endif -/** +/* * \brief Needed for calculation of NICAM prescale feature in AUD */ #ifndef DRX_AUD_MAX_NICAM_PRESCALE @@ -478,7 +478,7 @@ DEFINES /*=== REGISTER ACCESS MACROS =================================================*/ /*============================================================================*/ -/** +/* * This macro is used to create byte arrays for block writes. * Block writes speed up I2C traffic between host and demod. * The macro takes care of the required byte order in a 16 bits word. @@ -486,7 +486,7 @@ DEFINES */ #define DRXJ_16TO8(x) ((u8) (((u16)x) & 0xFF)), \ ((u8)((((u16)x)>>8)&0xFF)) -/** +/* * This macro is used to convert byte array to 16 bit register value for block read. * Block read speed up I2C traffic between host and demod. * The macro takes care of the required byte order in a 16 bits word. @@ -501,7 +501,7 @@ DEFINES /*=== HI COMMAND RELATED DEFINES =============================================*/ /*============================================================================*/ -/** +/* * \brief General maximum number of retries for ucode command interfaces */ #define DRXJ_MAX_RETRIES (100) @@ -807,7 +807,7 @@ static struct drxj_data drxj_data_g = { }, }; -/** +/* * \var drxj_default_addr_g * \brief Default I2C address and device identifier. */ @@ -816,7 +816,7 @@ static struct i2c_device_addr drxj_default_addr_g = { DRXJ_DEF_DEMOD_DEV_ID /* device id */ }; -/** +/* * \var drxj_default_comm_attr_g * \brief Default common attributes of a drxj demodulator instance. */ @@ -887,7 +887,7 @@ static struct drx_common_attr drxj_default_comm_attr_g = { 0 /* mfx */ }; -/** +/* * \var drxj_default_demod_g * \brief Default drxj demodulator instance. */ @@ -897,7 +897,7 @@ static struct drx_demod_instance drxj_default_demod_g = { &drxj_data_g /* demod device specific attributes */ }; -/** +/* * \brief Default audio data structure for DRK demodulator instance. * * This structure is DRXK specific. @@ -997,7 +997,7 @@ struct drxj_hi_cmd { /*=== MICROCODE RELATED STRUCTURES ===========================================*/ /*============================================================================*/ -/** +/* * struct drxu_code_block_hdr - Structure of the microcode block headers * * @addr: Destination address of the data in this block @@ -1086,7 +1086,7 @@ static u32 frac28(u32 N, u32 D) return Q1; } -/** +/* * \fn u32 log1_times100( u32 x) * \brief Compute: 100*log10(x) * \param x 32 bits @@ -1198,7 +1198,7 @@ static u32 log1_times100(u32 x) } -/** +/* * \fn u32 frac_times1e6( u16 N, u32 D) * \brief Compute: (N/D) * 1000000. * \param N nominator 16-bits. @@ -1235,7 +1235,7 @@ static u32 frac_times1e6(u32 N, u32 D) /*============================================================================*/ -/** +/* * \brief Values for NICAM prescaler gain. Computed from dB to integer * and rounded. For calc used formula: 16*10^(prescaleGain[dB]/20). * @@ -1280,7 +1280,7 @@ static const u16 nicam_presc_table_val[43] = { #define DRXJ_DAP_AUDTRIF_TIMEOUT 80 /* millisec */ /*============================================================================*/ -/** +/* * \fn bool is_handled_by_aud_tr_if( u32 addr ) * \brief Check if this address is handled by the audio token ring interface. * \param addr @@ -1386,7 +1386,7 @@ int drxbsp_i2c_write_read(struct i2c_device_addr *w_dev_addr, /*============================================================================*/ -/****************************** +/***************************** * * int drxdap_fasi_read_block ( * struct i2c_device_addr *dev_addr, -- address of I2C device @@ -1498,7 +1498,7 @@ static int drxdap_fasi_read_block(struct i2c_device_addr *dev_addr, } -/****************************** +/***************************** * * int drxdap_fasi_read_reg16 ( * struct i2c_device_addr *dev_addr, -- address of I2C device @@ -1531,7 +1531,7 @@ static int drxdap_fasi_read_reg16(struct i2c_device_addr *dev_addr, return rc; } -/****************************** +/***************************** * * int drxdap_fasi_read_reg32 ( * struct i2c_device_addr *dev_addr, -- address of I2C device @@ -1566,7 +1566,7 @@ static int drxdap_fasi_read_reg32(struct i2c_device_addr *dev_addr, return rc; } -/****************************** +/***************************** * * int drxdap_fasi_write_block ( * struct i2c_device_addr *dev_addr, -- address of I2C device @@ -1705,7 +1705,7 @@ static int drxdap_fasi_write_block(struct i2c_device_addr *dev_addr, return first_err; } -/****************************** +/***************************** * * int drxdap_fasi_write_reg16 ( * struct i2c_device_addr *dev_addr, -- address of I2C device @@ -1734,7 +1734,7 @@ static int drxdap_fasi_write_reg16(struct i2c_device_addr *dev_addr, return drxdap_fasi_write_block(dev_addr, addr, sizeof(data), buf, flags); } -/****************************** +/***************************** * * int drxdap_fasi_read_modify_write_reg16 ( * struct i2c_device_addr *dev_addr, -- address of I2C device @@ -1778,7 +1778,7 @@ static int drxdap_fasi_read_modify_write_reg16(struct i2c_device_addr *dev_addr, return rc; } -/****************************** +/***************************** * * int drxdap_fasi_write_reg32 ( * struct i2c_device_addr *dev_addr, -- address of I2C device @@ -1811,7 +1811,7 @@ static int drxdap_fasi_write_reg32(struct i2c_device_addr *dev_addr, /*============================================================================*/ -/** +/* * \fn int drxj_dap_rm_write_reg16short * \brief Read modify write 16 bits audio register using short format only. * \param dev_addr @@ -1890,7 +1890,7 @@ static int drxj_dap_read_modify_write_reg16(struct i2c_device_addr *dev_addr, /*============================================================================*/ -/** +/* * \fn int drxj_dap_read_aud_reg16 * \brief Read 16 bits audio register * \param dev_addr @@ -1997,7 +1997,7 @@ static int drxj_dap_read_reg16(struct i2c_device_addr *dev_addr, } /*============================================================================*/ -/** +/* * \fn int drxj_dap_write_aud_reg16 * \brief Write 16 bits audio register * \param dev_addr @@ -2086,7 +2086,7 @@ static int drxj_dap_write_reg16(struct i2c_device_addr *dev_addr, #define DRXJ_HI_ATOMIC_READ SIO_HI_RA_RAM_PAR_3_ACP_RW_READ #define DRXJ_HI_ATOMIC_WRITE SIO_HI_RA_RAM_PAR_3_ACP_RW_WRITE -/** +/* * \fn int drxj_dap_atomic_read_write_block() * \brief Basic access routine for atomic read or write access * \param dev_addr pointer to i2c dev address @@ -2168,7 +2168,7 @@ rw_error: /*============================================================================*/ -/** +/* * \fn int drxj_dap_atomic_read_reg32() * \brief Atomic read of 32 bits words */ @@ -2215,7 +2215,7 @@ int drxj_dap_atomic_read_reg32(struct i2c_device_addr *dev_addr, /*============================================================================*/ /*============================================================================*/ -/** +/* * \fn int hi_cfg_command() * \brief Configure HI with settings stored in the demod structure. * \param demod Demodulator. @@ -2258,7 +2258,7 @@ rw_error: return rc; } -/** +/* * \fn int hi_command() * \brief Configure HI with settings stored in the demod structure. * \param dev_addr I2C address. @@ -2369,7 +2369,7 @@ rw_error: return rc; } -/** +/* * \fn int init_hi( const struct drx_demod_instance *demod ) * \brief Initialise and configurate HI. * \param demod pointer to demod data. @@ -2450,7 +2450,7 @@ rw_error: /*============================================================================*/ /*============================================================================*/ -/** +/* * \fn int get_device_capabilities() * \brief Get and store device capabilities. * \param demod Pointer to demodulator instance. @@ -2656,7 +2656,7 @@ rw_error: return rc; } -/** +/* * \fn int power_up_device() * \brief Power up device. * \param demod Pointer to demodulator instance. @@ -2710,7 +2710,7 @@ static int power_up_device(struct drx_demod_instance *demod) /*----------------------------------------------------------------------------*/ /* MPEG Output Configuration Functions - begin */ /*----------------------------------------------------------------------------*/ -/** +/* * \fn int ctrl_set_cfg_mpeg_output() * \brief Set MPEG output configuration of the device. * \param devmod Pointer to demodulator instance. @@ -3356,7 +3356,7 @@ rw_error: /* miscellaneous configurations - begin */ /*----------------------------------------------------------------------------*/ -/** +/* * \fn int set_mpegtei_handling() * \brief Activate MPEG TEI handling settings. * \param devmod Pointer to demodulator instance. @@ -3429,7 +3429,7 @@ rw_error: } /*----------------------------------------------------------------------------*/ -/** +/* * \fn int bit_reverse_mpeg_output() * \brief Set MPEG output bit-endian settings. * \param devmod Pointer to demodulator instance. @@ -3472,7 +3472,7 @@ rw_error: } /*----------------------------------------------------------------------------*/ -/** +/* * \fn int set_mpeg_start_width() * \brief Set MPEG start width. * \param devmod Pointer to demodulator instance. @@ -3522,7 +3522,7 @@ rw_error: /*----------------------------------------------------------------------------*/ /* UIO Configuration Functions - begin */ /*----------------------------------------------------------------------------*/ -/** +/* * \fn int ctrl_set_uio_cfg() * \brief Configure modus oprandi UIO. * \param demod Pointer to demodulator instance. @@ -3659,7 +3659,7 @@ rw_error: return rc; } -/** +/* * \fn int ctrl_uio_write() * \brief Write to a UIO. * \param demod Pointer to demodulator instance. @@ -3868,7 +3868,7 @@ rw_error: /*----------------------------------------------------------------------------*/ /* I2C Bridge Functions - begin */ /*----------------------------------------------------------------------------*/ -/** +/* * \fn int ctrl_i2c_bridge() * \brief Open or close the I2C switch to tuner. * \param demod Pointer to demodulator instance. @@ -3903,7 +3903,7 @@ ctrl_i2c_bridge(struct drx_demod_instance *demod, bool *bridge_closed) /*----------------------------------------------------------------------------*/ /* Smart antenna Functions - begin */ /*----------------------------------------------------------------------------*/ -/** +/* * \fn int smart_ant_init() * \brief Initialize Smart Antenna. * \param pointer to struct drx_demod_instance. @@ -4116,7 +4116,7 @@ rw_error: return rc; } -/** +/* * \fn int DRXJ_DAP_SCUAtomicReadWriteBlock() * \brief Basic access routine for SCU atomic read or write access * \param dev_addr pointer to i2c dev address @@ -4188,7 +4188,7 @@ rw_error: /*============================================================================*/ -/** +/* * \fn int DRXJ_DAP_AtomicReadReg16() * \brief Atomic read of 16 bits words */ @@ -4216,7 +4216,7 @@ int drxj_dap_scu_atomic_read_reg16(struct i2c_device_addr *dev_addr, } /*============================================================================*/ -/** +/* * \fn int drxj_dap_scu_atomic_write_reg16() * \brief Atomic read of 16 bits words */ @@ -4237,7 +4237,7 @@ int drxj_dap_scu_atomic_write_reg16(struct i2c_device_addr *dev_addr, } /* -------------------------------------------------------------------------- */ -/** +/* * \brief Measure result of ADC synchronisation * \param demod demod instance * \param count (returned) count @@ -4297,7 +4297,7 @@ rw_error: return rc; } -/** +/* * \brief Synchronize analog and digital clock domains * \param demod demod instance * \return int. @@ -4365,7 +4365,7 @@ rw_error: /*== 8VSB & QAM COMMON DATAPATH FUNCTIONS ==*/ /*============================================================================*/ /*============================================================================*/ -/** +/* * \fn int init_agc () * \brief Initialize AGC for all standards. * \param demod instance of demodulator. @@ -4741,7 +4741,7 @@ rw_error: return rc; } -/** +/* * \fn int set_frequency () * \brief Set frequency shift. * \param demod instance of demodulator. @@ -4839,7 +4839,7 @@ rw_error: return rc; } -/** +/* * \fn int get_acc_pkt_err() * \brief Retrieve signal strength for VSB and QAM. * \param demod Pointer to demod instance @@ -4891,7 +4891,7 @@ rw_error: /*============================================================================*/ -/** +/* * \fn int set_agc_rf () * \brief Configure RF AGC * \param demod instance of demodulator. @@ -5105,7 +5105,7 @@ rw_error: return rc; } -/** +/* * \fn int set_agc_if () * \brief Configure If AGC * \param demod instance of demodulator. @@ -5334,7 +5334,7 @@ rw_error: return rc; } -/** +/* * \fn int set_iqm_af () * \brief Configure IQM AF registers * \param demod instance of demodulator. @@ -5380,7 +5380,7 @@ rw_error: /*============================================================================*/ /*============================================================================*/ -/** +/* * \fn int power_down_vsb () * \brief Powr down QAM related blocks. * \param demod instance of demodulator. @@ -5478,7 +5478,7 @@ rw_error: return rc; } -/** +/* * \fn int set_vsb_leak_n_gain () * \brief Set ATSC demod. * \param demod instance of demodulator. @@ -5694,7 +5694,7 @@ rw_error: return rc; } -/** +/* * \fn int set_vsb() * \brief Set 8VSB demod. * \param demod instance of demodulator. @@ -6200,7 +6200,7 @@ rw_error: return rc; } -/** +/* * \fn static short get_vsb_post_rs_pck_err(struct i2c_device_addr *dev_addr, u16 *PckErrs) * \brief Get the values of packet error in 8VSB mode * \return Error code @@ -6239,7 +6239,7 @@ rw_error: return rc; } -/** +/* * \fn static short GetVSBBer(struct i2c_device_addr *dev_addr, u32 *ber) * \brief Get the values of ber in VSB mode * \return Error code @@ -6284,7 +6284,7 @@ rw_error: return rc; } -/** +/* * \fn static short get_vs_bpre_viterbi_ber(struct i2c_device_addr *dev_addr, u32 *ber) * \brief Get the values of ber in VSB mode * \return Error code @@ -6306,7 +6306,7 @@ static int get_vs_bpre_viterbi_ber(struct i2c_device_addr *dev_addr, return 0; } -/** +/* * \fn static int get_vsbmer(struct i2c_device_addr *dev_addr, u16 *mer) * \brief Get the values of MER * \return Error code @@ -6340,7 +6340,7 @@ rw_error: /*============================================================================*/ /*============================================================================*/ -/** +/* * \fn int power_down_qam () * \brief Powr down QAM related blocks. * \param demod instance of demodulator. @@ -6444,7 +6444,7 @@ rw_error: /*============================================================================*/ -/** +/* * \fn int set_qam_measurement () * \brief Setup of the QAM Measuremnt intervals for signal quality * \param demod instance of demod. @@ -6656,7 +6656,7 @@ rw_error: /*============================================================================*/ -/** +/* * \fn int set_qam16 () * \brief QAM16 specific setup * \param demod instance of demod. @@ -6891,7 +6891,7 @@ rw_error: /*============================================================================*/ -/** +/* * \fn int set_qam32 () * \brief QAM32 specific setup * \param demod instance of demod. @@ -7126,7 +7126,7 @@ rw_error: /*============================================================================*/ -/** +/* * \fn int set_qam64 () * \brief QAM64 specific setup * \param demod instance of demod. @@ -7362,7 +7362,7 @@ rw_error: /*============================================================================*/ -/** +/* * \fn int set_qam128 () * \brief QAM128 specific setup * \param demod: instance of demod. @@ -7597,7 +7597,7 @@ rw_error: /*============================================================================*/ -/** +/* * \fn int set_qam256 () * \brief QAM256 specific setup * \param demod: instance of demod. @@ -7835,7 +7835,7 @@ rw_error: #define QAM_SET_OP_CONSTELLATION 0x2 #define QAM_SET_OP_SPECTRUM 0X4 -/** +/* * \fn int set_qam () * \brief Set QAM demod. * \param demod: instance of demod. @@ -8845,7 +8845,7 @@ rw_error: #define DEMOD_LOCKED 0x1 #define SYNC_FLIPPED 0x2 #define SPEC_MIRRORED 0x4 -/** +/* * \fn int qam64auto () * \brief auto do sync pattern switching and mirroring. * \param demod: instance of demod. @@ -8993,7 +8993,7 @@ rw_error: return rc; } -/** +/* * \fn int qam256auto () * \brief auto do sync pattern switching and mirroring. * \param demod: instance of demod. @@ -9077,7 +9077,7 @@ rw_error: return rc; } -/** +/* * \fn int set_qam_channel () * \brief Set QAM channel according to the requested constellation. * \param demod: instance of demod. @@ -9284,7 +9284,7 @@ rw_error: /*============================================================================*/ -/** +/* * \fn static short get_qamrs_err_count(struct i2c_device_addr *dev_addr) * \brief Get RS error count in QAM mode (used for post RS BER calculation) * \return Error code @@ -9355,7 +9355,7 @@ rw_error: /*============================================================================*/ -/** +/* * \fn int get_sig_strength() * \brief Retrieve signal strength for VSB and QAM. * \param demod Pointer to demod instance @@ -9435,7 +9435,7 @@ rw_error: return rc; } -/** +/* * \fn int ctrl_get_qam_sig_quality() * \brief Retrieve QAM signal quality from device. * \param devmod Pointer to demodulator instance. @@ -9721,7 +9721,7 @@ rw_error: */ /* -------------------------------------------------------------------------- */ -/** +/* * \fn int power_down_atv () * \brief Power down ATV. * \param demod instance of demodulator @@ -9822,7 +9822,7 @@ rw_error: /*============================================================================*/ -/** +/* * \brief Power up AUD. * \param demod instance of demodulator * \return int. @@ -9850,7 +9850,7 @@ rw_error: return rc; } -/** +/* * \fn int set_orx_nsu_aox() * \brief Configure OrxNsuAox for OOB * \param demod instance of demodulator. @@ -9884,7 +9884,7 @@ rw_error: return rc; } -/** +/* * \fn int ctrl_set_oob() * \brief Set OOB channel to be used. * \param demod instance of demodulator @@ -9986,9 +9986,9 @@ static int ctrl_set_oob(struct drx_demod_instance *demod, struct drxoob *oob_par 20; } - /*********/ + /********/ /* Stop */ - /*********/ + /********/ rc = drxj_dap_write_reg16(dev_addr, ORX_COMM_EXEC__A, ORX_COMM_EXEC_STOP, 0); if (rc != 0) { pr_err("error %d\n", rc); @@ -10004,9 +10004,9 @@ static int ctrl_set_oob(struct drx_demod_instance *demod, struct drxoob *oob_par pr_err("error %d\n", rc); goto rw_error; } - /*********/ + /********/ /* Reset */ - /*********/ + /********/ scu_cmd.command = SCU_RAM_COMMAND_STANDARD_OOB | SCU_RAM_COMMAND_CMD_DEMOD_RESET; scu_cmd.parameter_len = 0; @@ -10017,9 +10017,9 @@ static int ctrl_set_oob(struct drx_demod_instance *demod, struct drxoob *oob_par pr_err("error %d\n", rc); goto rw_error; } - /***********/ + /**********/ /* SET_ENV */ - /***********/ + /**********/ /* set frequency, spectrum inversion and data rate */ scu_cmd.command = SCU_RAM_COMMAND_STANDARD_OOB | SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV; @@ -10376,9 +10376,9 @@ static int ctrl_set_oob(struct drx_demod_instance *demod, struct drxoob *oob_par pr_err("error %d\n", rc); goto rw_error; } - /*********/ + /********/ /* Start */ - /*********/ + /********/ scu_cmd.command = SCU_RAM_COMMAND_STANDARD_OOB | SCU_RAM_COMMAND_CMD_DEMOD_START; scu_cmd.parameter_len = 0; @@ -10419,7 +10419,7 @@ rw_error: /*============================================================================= ===== ctrl_set_channel() ========================================================== ===========================================================================*/ -/** +/* * \fn int ctrl_set_channel() * \brief Select a new transmission channel. * \param demod instance of demod. @@ -10652,7 +10652,7 @@ rw_error: ===== SigQuality() ========================================================== ===========================================================================*/ -/** +/* * \fn int ctrl_sig_quality() * \brief Retrieve signal quality form device. * \param devmod Pointer to demodulator instance. @@ -10768,7 +10768,7 @@ rw_error: /*============================================================================*/ -/** +/* * \fn int ctrl_lock_status() * \brief Retrieve lock status . * \param dev_addr Pointer to demodulator device address. @@ -10856,7 +10856,7 @@ rw_error: /*============================================================================*/ -/** +/* * \fn int ctrl_set_standard() * \brief Set modulation standard to be used. * \param standard Modulation standard. @@ -11012,7 +11012,7 @@ static void drxj_reset_mode(struct drxj_data *ext_attr) ext_attr->vsb_pre_saw_cfg.use_pre_saw = true; } -/** +/* * \fn int ctrl_power_mode() * \brief Set the power mode of the device to the specified power mode * \param demod Pointer to demodulator instance. @@ -11171,7 +11171,7 @@ rw_error: /*== CTRL Set/Get Config related functions ===================================*/ /*============================================================================*/ -/** +/* * \fn int ctrl_set_cfg_pre_saw() * \brief Set Pre-saw reference. * \param demod demod instance @@ -11234,7 +11234,7 @@ rw_error: /*============================================================================*/ -/** +/* * \fn int ctrl_set_cfg_afe_gain() * \brief Set AFE Gain. * \param demod demod instance @@ -11324,7 +11324,7 @@ static int drx_ctrl_u_code(struct drx_demod_instance *demod, enum drxu_code_action action); static int drxj_set_lna_state(struct drx_demod_instance *demod, bool state); -/** +/* * \fn drxj_open() * \brief Open the demod instance, configure device, configure drxdriver * \return Status_t Return status. @@ -11543,7 +11543,7 @@ rw_error: } /*============================================================================*/ -/** +/* * \fn drxj_close() * \brief Close the demod instance, power down the device * \return Status_t Return status. @@ -11594,7 +11594,7 @@ rw_error: * Microcode related functions */ -/** +/* * drx_u_code_compute_crc - Compute CRC of block of microcode data. * @block_data: Pointer to microcode data. * @nr_words: Size of microcode block (number of 16 bits words). @@ -11622,7 +11622,7 @@ static u16 drx_u_code_compute_crc(u8 *block_data, u16 nr_words) return (u16)(crc_word >> 16); } -/** +/* * drx_check_firmware - checks if the loaded firmware is valid * * @demod: demod structure @@ -11708,7 +11708,7 @@ eof: return -EINVAL; } -/** +/* * drx_ctrl_u_code - Handle microcode upload or verify. * @dev_addr: Address of device. * @mc_info: Pointer to information about microcode data. -- cgit v1.2.1