From 0c14c7f957e70c3cb100e3fd6553b0ebea557571 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Mon, 28 May 2012 16:42:49 -0300 Subject: drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_hdmi.c | 88 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 85 insertions(+), 3 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 8d892b0cd8a1..2f2adc4e511c 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -308,9 +308,6 @@ static void intel_set_infoframe(struct drm_encoder *encoder, { struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); - if (!intel_hdmi->has_hdmi_sink) - return; - intel_dip_infoframe_csum(frame); intel_hdmi->write_infoframe(encoder, frame); } @@ -348,6 +345,30 @@ static void intel_hdmi_set_spd_infoframe(struct drm_encoder *encoder) static void g4x_set_infoframes(struct drm_encoder *encoder, struct drm_display_mode *adjusted_mode) { + struct drm_i915_private *dev_priv = encoder->dev->dev_private; + struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); + u32 reg = VIDEO_DIP_CTL; + u32 val = I915_READ(reg); + + /* If the registers were not initialized yet, they might be zeroes, + * which means we're selecting the AVI DIP and we're setting its + * frequency to once. This seems to really confuse the HW and make + * things stop working (the register spec says the AVI always needs to + * be sent every VSync). So here we avoid writing to the register more + * than we need and also explicitly select the AVI DIP and explicitly + * set its frequency to every VSync. Avoiding to write it twice seems to + * be enough to solve the problem, but being defensive shouldn't hurt us + * either. */ + val |= VIDEO_DIP_SELECT_AVI | VIDEO_DIP_FREQ_VSYNC; + + if (!intel_hdmi->has_hdmi_sink) { + if (!(val & VIDEO_DIP_ENABLE)) + return; + val &= ~VIDEO_DIP_ENABLE; + I915_WRITE(reg, val); + return; + } + intel_hdmi_set_avi_infoframe(encoder, adjusted_mode); intel_hdmi_set_spd_infoframe(encoder); } @@ -355,6 +376,23 @@ static void g4x_set_infoframes(struct drm_encoder *encoder, static void ibx_set_infoframes(struct drm_encoder *encoder, struct drm_display_mode *adjusted_mode) { + struct drm_i915_private *dev_priv = encoder->dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); + struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); + u32 reg = TVIDEO_DIP_CTL(intel_crtc->pipe); + u32 val = I915_READ(reg); + + /* See the big comment in g4x_set_infoframes() */ + val |= VIDEO_DIP_SELECT_AVI | VIDEO_DIP_FREQ_VSYNC; + + if (!intel_hdmi->has_hdmi_sink) { + if (!(val & VIDEO_DIP_ENABLE)) + return; + val &= ~VIDEO_DIP_ENABLE; + I915_WRITE(reg, val); + return; + } + intel_hdmi_set_avi_infoframe(encoder, adjusted_mode); intel_hdmi_set_spd_infoframe(encoder); } @@ -362,6 +400,23 @@ static void ibx_set_infoframes(struct drm_encoder *encoder, static void cpt_set_infoframes(struct drm_encoder *encoder, struct drm_display_mode *adjusted_mode) { + struct drm_i915_private *dev_priv = encoder->dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); + struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); + u32 reg = TVIDEO_DIP_CTL(intel_crtc->pipe); + u32 val = I915_READ(reg); + + /* See the big comment in g4x_set_infoframes() */ + val |= VIDEO_DIP_SELECT_AVI | VIDEO_DIP_FREQ_VSYNC; + + if (!intel_hdmi->has_hdmi_sink) { + if (!(val & VIDEO_DIP_ENABLE)) + return; + val &= ~(VIDEO_DIP_ENABLE | VIDEO_DIP_ENABLE_AVI); + I915_WRITE(reg, val); + return; + } + intel_hdmi_set_avi_infoframe(encoder, adjusted_mode); intel_hdmi_set_spd_infoframe(encoder); } @@ -369,6 +424,23 @@ static void cpt_set_infoframes(struct drm_encoder *encoder, static void vlv_set_infoframes(struct drm_encoder *encoder, struct drm_display_mode *adjusted_mode) { + struct drm_i915_private *dev_priv = encoder->dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); + struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); + u32 reg = VLV_TVIDEO_DIP_CTL(intel_crtc->pipe); + u32 val = I915_READ(reg); + + /* See the big comment in g4x_set_infoframes() */ + val |= VIDEO_DIP_SELECT_AVI | VIDEO_DIP_FREQ_VSYNC; + + if (!intel_hdmi->has_hdmi_sink) { + if (!(val & VIDEO_DIP_ENABLE)) + return; + val &= ~VIDEO_DIP_ENABLE; + I915_WRITE(reg, val); + return; + } + intel_hdmi_set_avi_infoframe(encoder, adjusted_mode); intel_hdmi_set_spd_infoframe(encoder); } @@ -376,6 +448,16 @@ static void vlv_set_infoframes(struct drm_encoder *encoder, static void hsw_set_infoframes(struct drm_encoder *encoder, struct drm_display_mode *adjusted_mode) { + struct drm_i915_private *dev_priv = encoder->dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); + struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); + u32 reg = HSW_TVIDEO_DIP_CTL(intel_crtc->pipe); + + if (!intel_hdmi->has_hdmi_sink) { + I915_WRITE(reg, 0); + return; + } + intel_hdmi_set_avi_infoframe(encoder, adjusted_mode); intel_hdmi_set_spd_infoframe(encoder); } -- cgit v1.2.1