From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- arch/ppc/syslib/cpm2_common.c | 198 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 198 insertions(+) create mode 100644 arch/ppc/syslib/cpm2_common.c (limited to 'arch/ppc/syslib/cpm2_common.c') diff --git a/arch/ppc/syslib/cpm2_common.c b/arch/ppc/syslib/cpm2_common.c new file mode 100644 index 000000000000..ea5e77080e8d --- /dev/null +++ b/arch/ppc/syslib/cpm2_common.c @@ -0,0 +1,198 @@ +/* + * General Purpose functions for the global management of the + * 8260 Communication Processor Module. + * Copyright (c) 1999 Dan Malek (dmalek@jlc.net) + * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com) + * 2.3.99 Updates + * + * In addition to the individual control of the communication + * channels, there are a few functions that globally affect the + * communication processor. + * + * Buffer descriptors must be allocated from the dual ported memory + * space. The allocator for that is here. When the communication + * process is reset, we reclaim the memory available. There is + * currently no deallocator for this memory. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static void cpm2_dpinit(void); +cpm_cpm2_t *cpmp; /* Pointer to comm processor space */ + +/* We allocate this here because it is used almost exclusively for + * the communication processor devices. + */ +cpm2_map_t *cpm2_immr; + +#define CPM_MAP_SIZE (0x40000) /* 256k - the PQ3 reserve this amount + of space for CPM as it is larger + than on PQ2 */ + +void +cpm2_reset(void) +{ + cpm2_immr = (cpm2_map_t *)ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE); + + /* Reclaim the DP memory for our use. + */ + cpm2_dpinit(); + + /* Tell everyone where the comm processor resides. + */ + cpmp = &cpm2_immr->im_cpm; +} + +/* Set a baud rate generator. This needs lots of work. There are + * eight BRGs, which can be connected to the CPM channels or output + * as clocks. The BRGs are in two different block of internal + * memory mapped space. + * The baud rate clock is the system clock divided by something. + * It was set up long ago during the initial boot phase and is + * is given to us. + * Baud rate clocks are zero-based in the driver code (as that maps + * to port numbers). Documentation uses 1-based numbering. + */ +#define BRG_INT_CLK (((bd_t *)__res)->bi_brgfreq) +#define BRG_UART_CLK (BRG_INT_CLK/16) + +/* This function is used by UARTS, or anything else that uses a 16x + * oversampled clock. + */ +void +cpm_setbrg(uint brg, uint rate) +{ + volatile uint *bp; + + /* This is good enough to get SMCs running..... + */ + if (brg < 4) { + bp = (uint *)&cpm2_immr->im_brgc1; + } + else { + bp = (uint *)&cpm2_immr->im_brgc5; + brg -= 4; + } + bp += brg; + *bp = ((BRG_UART_CLK / rate) << 1) | CPM_BRG_EN; +} + +/* This function is used to set high speed synchronous baud rate + * clocks. + */ +void +cpm2_fastbrg(uint brg, uint rate, int div16) +{ + volatile uint *bp; + + if (brg < 4) { + bp = (uint *)&cpm2_immr->im_brgc1; + } + else { + bp = (uint *)&cpm2_immr->im_brgc5; + brg -= 4; + } + bp += brg; + *bp = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN; + if (div16) + *bp |= CPM_BRG_DIV16; +} + +/* + * dpalloc / dpfree bits. + */ +static spinlock_t cpm_dpmem_lock; +/* 16 blocks should be enough to satisfy all requests + * until the memory subsystem goes up... */ +static rh_block_t cpm_boot_dpmem_rh_block[16]; +static rh_info_t cpm_dpmem_info; + +static void cpm2_dpinit(void) +{ + spin_lock_init(&cpm_dpmem_lock); + + /* initialize the info header */ + rh_init(&cpm_dpmem_info, 1, + sizeof(cpm_boot_dpmem_rh_block) / + sizeof(cpm_boot_dpmem_rh_block[0]), + cpm_boot_dpmem_rh_block); + + /* Attach the usable dpmem area */ + /* XXX: This is actually crap. CPM_DATAONLY_BASE and + * CPM_DATAONLY_SIZE is only a subset of the available dpram. It + * varies with the processor and the microcode patches activated. + * But the following should be at least safe. + */ + rh_attach_region(&cpm_dpmem_info, (void *)CPM_DATAONLY_BASE, + CPM_DATAONLY_SIZE); +} + +/* This function returns an index into the DPRAM area. + */ +uint cpm_dpalloc(uint size, uint align) +{ + void *start; + unsigned long flags; + + spin_lock_irqsave(&cpm_dpmem_lock, flags); + cpm_dpmem_info.alignment = align; + start = rh_alloc(&cpm_dpmem_info, size, "commproc"); + spin_unlock_irqrestore(&cpm_dpmem_lock, flags); + + return (uint)start; +} +EXPORT_SYMBOL(cpm_dpalloc); + +int cpm_dpfree(uint offset) +{ + int ret; + unsigned long flags; + + spin_lock_irqsave(&cpm_dpmem_lock, flags); + ret = rh_free(&cpm_dpmem_info, (void *)offset); + spin_unlock_irqrestore(&cpm_dpmem_lock, flags); + + return ret; +} +EXPORT_SYMBOL(cpm_dpfree); + +/* not sure if this is ever needed */ +uint cpm_dpalloc_fixed(uint offset, uint size, uint align) +{ + void *start; + unsigned long flags; + + spin_lock_irqsave(&cpm_dpmem_lock, flags); + cpm_dpmem_info.alignment = align; + start = rh_alloc_fixed(&cpm_dpmem_info, (void *)offset, size, "commproc"); + spin_unlock_irqrestore(&cpm_dpmem_lock, flags); + + return (uint)start; +} +EXPORT_SYMBOL(cpm_dpalloc_fixed); + +void cpm_dpdump(void) +{ + rh_dump(&cpm_dpmem_info); +} +EXPORT_SYMBOL(cpm_dpdump); + +void *cpm_dpram_addr(uint offset) +{ + return (void *)&cpm2_immr->im_dprambase[offset]; +} +EXPORT_SYMBOL(cpm_dpram_addr); -- cgit v1.2.1