From 9bd80b41c5a350831599464689ab0d4db94d7c75 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 12 Aug 2013 17:49:03 +0200 Subject: ARM: tegra: beaver: Enable HDMI output Enable the HDMI output as well as DDC and hotplug detection on Beaver. Signed-off-by: Thierry Reding Signed-off-by: Stephen Warren --- arch/arm/boot/dts/tegra30-beaver.dts | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot/dts/tegra30-beaver.dts') diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index 87c5f7b7c271..7c96057844ac 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -10,6 +10,19 @@ reg = <0x80000000 0x7ff00000>; }; + host1x { + hdmi { + status = "okay"; + + vdd-supply = <&sys_3v3_reg>; + pll-supply = <&vio_reg>; + + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + nvidia,ddc-i2c-bus = <&hdmiddc>; + }; + }; + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -107,7 +120,7 @@ clock-frequency = <100000>; }; - i2c@7000c700 { + hdmiddc: i2c@7000c700 { status = "okay"; clock-frequency = <100000>; }; -- cgit v1.2.1