From d9d41df3e8ef39b7b2cfeb4e9a2ba5c7cf7cad88 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 3 Sep 2015 17:50:01 -0500 Subject: dt-bindings: consolidate various misc bindings Move various bindings in misc to appropriate subsystem directories. Signed-off-by: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala --- .../devicetree/bindings/arm/tegra/nvidia,nvec.txt | 21 ++++ .../devicetree/bindings/hid/hid-over-i2c.txt | 28 ----- .../devicetree/bindings/iio/accel/lis302.txt | 119 +++++++++++++++++++++ .../devicetree/bindings/iio/dac/ti,dac7512.txt | 20 ++++ .../devicetree/bindings/iio/pressure/bmp085.txt | 24 +++++ .../devicetree/bindings/input/hid-over-i2c.txt | 28 +++++ .../bindings/interrupt-controller/open-pic.txt | 98 +++++++++++++++++ Documentation/devicetree/bindings/misc/bmp085.txt | 24 ----- Documentation/devicetree/bindings/misc/lis302.txt | 119 --------------------- .../devicetree/bindings/misc/ti,dac7512.txt | 20 ---- .../devicetree/bindings/nvec/nvidia,nvec.txt | 21 ---- Documentation/devicetree/bindings/open-pic.txt | 98 ----------------- 12 files changed, 310 insertions(+), 310 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/tegra/nvidia,nvec.txt delete mode 100644 Documentation/devicetree/bindings/hid/hid-over-i2c.txt create mode 100644 Documentation/devicetree/bindings/iio/accel/lis302.txt create mode 100644 Documentation/devicetree/bindings/iio/dac/ti,dac7512.txt create mode 100644 Documentation/devicetree/bindings/iio/pressure/bmp085.txt create mode 100644 Documentation/devicetree/bindings/input/hid-over-i2c.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/open-pic.txt delete mode 100644 Documentation/devicetree/bindings/misc/bmp085.txt delete mode 100644 Documentation/devicetree/bindings/misc/lis302.txt delete mode 100644 Documentation/devicetree/bindings/misc/ti,dac7512.txt delete mode 100644 Documentation/devicetree/bindings/nvec/nvidia,nvec.txt delete mode 100644 Documentation/devicetree/bindings/open-pic.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,nvec.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,nvec.txt new file mode 100644 index 000000000000..5ae601e7f51f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,nvec.txt @@ -0,0 +1,21 @@ +NVIDIA compliant embedded controller + +Required properties: +- compatible : should be "nvidia,nvec". +- reg : the iomem of the i2c slave controller +- interrupts : the interrupt line of the i2c slave controller +- clock-frequency : the frequency of the i2c bus +- gpios : the gpio used for ec request +- slave-addr: the i2c address of the slave controller +- clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names : Must include the following entries: + Tegra20/Tegra30: + - div-clk + - fast-clk + Tegra114: + - div-clk +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - i2c diff --git a/Documentation/devicetree/bindings/hid/hid-over-i2c.txt b/Documentation/devicetree/bindings/hid/hid-over-i2c.txt deleted file mode 100644 index 488edcb264c4..000000000000 --- a/Documentation/devicetree/bindings/hid/hid-over-i2c.txt +++ /dev/null @@ -1,28 +0,0 @@ -* HID over I2C Device-Tree bindings - -HID over I2C provides support for various Human Interface Devices over the -I2C bus. These devices can be for example touchpads, keyboards, touch screens -or sensors. - -The specification has been written by Microsoft and is currently available here: -http://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx - -If this binding is used, the kernel module i2c-hid will handle the communication -with the device and the generic hid core layer will handle the protocol. - -Required properties: -- compatible: must be "hid-over-i2c" -- reg: i2c slave address -- hid-descr-addr: HID descriptor address -- interrupt-parent: the phandle for the interrupt controller -- interrupts: interrupt line - -Example: - - i2c-hid-dev@2c { - compatible = "hid-over-i2c"; - reg = <0x2c>; - hid-descr-addr = <0x0020>; - interrupt-parent = <&gpx3>; - interrupts = <3 2>; - }; diff --git a/Documentation/devicetree/bindings/iio/accel/lis302.txt b/Documentation/devicetree/bindings/iio/accel/lis302.txt new file mode 100644 index 000000000000..2a19bff9693f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/lis302.txt @@ -0,0 +1,119 @@ +LIS302 accelerometer devicetree bindings + +This device is matched via its bus drivers, and has a number of properties +that apply in on the generic device (independent from the bus). + + +Required properties for the SPI bindings: + - compatible: should be set to "st,lis3lv02d_spi" + - reg: the chipselect index + - spi-max-frequency: maximal bus speed, should be set to 1000000 unless + constrained by external circuitry + - interrupts: the interrupt generated by the device + +Required properties for the I2C bindings: + - compatible: should be set to "st,lis3lv02d" + - reg: i2c slave address + - Vdd-supply: The input supply for Vdd + - Vdd_IO-supply: The input supply for Vdd_IO + + +Optional properties for all bus drivers: + + - st,click-single-{x,y,z}: if present, tells the device to issue an + interrupt on single click events on the + x/y/z axis. + - st,click-double-{x,y,z}: if present, tells the device to issue an + interrupt on double click events on the + x/y/z axis. + - st,click-thresh-{x,y,z}: set the x/y/z axis threshold + - st,click-click-time-limit: click time limit, from 0 to 127.5msec + with step of 0.5 msec + - st,click-latency: click latency, from 0 to 255 msec with + step of 1 msec. + - st,click-window: click window, from 0 to 255 msec with + step of 1 msec. + - st,irq{1,2}-disable: disable IRQ 1/2 + - st,irq{1,2}-ff-wu-1: raise IRQ 1/2 on FF_WU_1 condition + - st,irq{1,2}-ff-wu-2: raise IRQ 1/2 on FF_WU_2 condition + - st,irq{1,2}-data-ready: raise IRQ 1/2 on data ready contition + - st,irq{1,2}-click: raise IRQ 1/2 on click condition + - st,irq-open-drain: consider IRQ lines open-drain + - st,irq-active-low: make IRQ lines active low + - st,wu-duration-1: duration register for Free-Fall/Wake-Up + interrupt 1 + - st,wu-duration-2: duration register for Free-Fall/Wake-Up + interrupt 2 + - st,wakeup-{x,y,z}-{lo,hi}: set wakeup condition on x/y/z axis for + upper/lower limit + - st,wakeup-threshold: set wakeup threshold + - st,wakeup2-{x,y,z}-{lo,hi}: set wakeup condition on x/y/z axis for + upper/lower limit for second wakeup + engine. + - st,wakeup2-threshold: set wakeup threshold for second wakeup + engine. + - st,highpass-cutoff-hz=: 1, 2, 4 or 8 for 1Hz, 2Hz, 4Hz or 8Hz of + highpass cut-off frequency + - st,hipass{1,2}-disable: disable highpass 1/2. + - st,default-rate=: set the default rate + - st,axis-{x,y,z}=: set the axis to map to the three coordinates. + Negative values can be used for inverted axis. + - st,{min,max}-limit-{x,y,z} set the min/max limits for x/y/z axis + (used by self-test) + + +Example for a SPI device node: + + lis302@0 { + compatible = "st,lis302dl-spi"; + reg = <0>; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio>; + interrupts = <104 0>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + }; + +Example for a I2C device node: + + lis331dlh: lis331dlh@18 { + compatible = "st,lis331dlh", "st,lis3lv02d"; + reg = <0x18>; + Vdd-supply = <&lis3_reg>; + Vdd_IO-supply = <&lis3_reg>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <120>; + st,min-limit-y = <120>; + st,min-limit-z = <140>; + st,max-limit-x = <550>; + st,max-limit-y = <550>; + st,max-limit-z = <750>; + }; + diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7512.txt b/Documentation/devicetree/bindings/iio/dac/ti,dac7512.txt new file mode 100644 index 000000000000..1db45939dac9 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7512.txt @@ -0,0 +1,20 @@ +TI DAC7512 DEVICETREE BINDINGS + +Required properties: + + - "compatible" Must be set to "ti,dac7512" + +Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt +apply. In particular, "reg" and "spi-max-frequency" properties must be given. + + +Example: + + spi_master { + dac7512: dac7512@0 { + compatible = "ti,dac7512"; + reg = <0>; /* CS0 */ + spi-max-frequency = <1000000>; + }; + }; + diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.txt b/Documentation/devicetree/bindings/iio/pressure/bmp085.txt new file mode 100644 index 000000000000..d7a6deb6b21e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.txt @@ -0,0 +1,24 @@ +BMP085/BMP18x digital pressure sensors + +Required properties: +- compatible: bosch,bmp085 + +Optional properties: +- chip-id: configurable chip id for non-default chip revisions +- temp-measurement-period: temperature measurement period (milliseconds) +- default-oversampling: default oversampling value to be used at startup, + value range is 0-3 with rising sensitivity. +- interrupt-parent: should be the phandle for the interrupt controller +- interrupts: interrupt mapping for IRQ + +Example: + +pressure@77 { + compatible = "bosch,bmp085"; + reg = <0x77>; + chip-id = <10>; + temp-measurement-period = <100>; + default-oversampling = <2>; + interrupt-parent = <&gpio0>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; +}; diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.txt b/Documentation/devicetree/bindings/input/hid-over-i2c.txt new file mode 100644 index 000000000000..488edcb264c4 --- /dev/null +++ b/Documentation/devicetree/bindings/input/hid-over-i2c.txt @@ -0,0 +1,28 @@ +* HID over I2C Device-Tree bindings + +HID over I2C provides support for various Human Interface Devices over the +I2C bus. These devices can be for example touchpads, keyboards, touch screens +or sensors. + +The specification has been written by Microsoft and is currently available here: +http://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx + +If this binding is used, the kernel module i2c-hid will handle the communication +with the device and the generic hid core layer will handle the protocol. + +Required properties: +- compatible: must be "hid-over-i2c" +- reg: i2c slave address +- hid-descr-addr: HID descriptor address +- interrupt-parent: the phandle for the interrupt controller +- interrupts: interrupt line + +Example: + + i2c-hid-dev@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x0020>; + interrupt-parent = <&gpx3>; + interrupts = <3 2>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/open-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/open-pic.txt new file mode 100644 index 000000000000..909a902dff85 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/open-pic.txt @@ -0,0 +1,98 @@ +* Open PIC Binding + +This binding specifies what properties must be available in the device tree +representation of an Open PIC compliant interrupt controller. This binding is +based on the binding defined for Open PIC in [1] and is a superset of that +binding. + +Required properties: + + NOTE: Many of these descriptions were paraphrased here from [1] to aid + readability. + + - compatible: Specifies the compatibility list for the PIC. The type + shall be and the value shall include "open-pic". + + - reg: Specifies the base physical address(s) and size(s) of this + PIC's addressable register space. The type shall be . + + - interrupt-controller: The presence of this property identifies the node + as an Open PIC. No property value shall be defined. + + - #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. The type shall be a and the value shall be 2. + + - #address-cells: Specifies the number of cells needed to encode an + address. The type shall be and the value shall be 0. As such, + 'interrupt-map' nodes do not have to specify a parent unit address. + +Optional properties: + + - pic-no-reset: The presence of this property indicates that the PIC + shall not be reset during runtime initialization. No property value shall + be defined. The presence of this property also mandates that any + initialization related to interrupt sources shall be limited to sources + explicitly referenced in the device tree. + +* Interrupt Specifier Definition + + Interrupt specifiers consists of 2 cells encoded as + follows: + + - <1st-cell>: The interrupt-number that identifies the interrupt source. + + - <2nd-cell>: The level-sense information, encoded as follows: + 0 = low-to-high edge triggered + 1 = active low level-sensitive + 2 = active high level-sensitive + 3 = high-to-low edge triggered + +* Examples + +Example 1: + + /* + * An Open PIC interrupt controller + */ + mpic: pic@40000 { + // This is an interrupt controller node. + interrupt-controller; + + // No address cells so that 'interrupt-map' nodes which reference + // this Open PIC node do not need a parent address specifier. + #address-cells = <0>; + + // Two cells to encode interrupt sources. + #interrupt-cells = <2>; + + // Offset address of 0x40000 and size of 0x40000. + reg = <0x40000 0x40000>; + + // Compatible with Open PIC. + compatible = "open-pic"; + + // The PIC shall not be reset. + pic-no-reset; + }; + +Example 2: + + /* + * An interrupt generating device that is wired to an Open PIC. + */ + serial0: serial@4500 { + // Interrupt source '42' that is active high level-sensitive. + // Note that there are only two cells as specified in the interrupt + // parent's '#interrupt-cells' property. + interrupts = <42 2>; + + // The interrupt controller that this device is wired to. + interrupt-parent = <&mpic>; + }; + +* References + +[1] Power.org (TM) Standard for Embedded Power Architecture (TM) Platform + Requirements (ePAPR), Version 1.0, July 2008. + (http://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf) + diff --git a/Documentation/devicetree/bindings/misc/bmp085.txt b/Documentation/devicetree/bindings/misc/bmp085.txt deleted file mode 100644 index d7a6deb6b21e..000000000000 --- a/Documentation/devicetree/bindings/misc/bmp085.txt +++ /dev/null @@ -1,24 +0,0 @@ -BMP085/BMP18x digital pressure sensors - -Required properties: -- compatible: bosch,bmp085 - -Optional properties: -- chip-id: configurable chip id for non-default chip revisions -- temp-measurement-period: temperature measurement period (milliseconds) -- default-oversampling: default oversampling value to be used at startup, - value range is 0-3 with rising sensitivity. -- interrupt-parent: should be the phandle for the interrupt controller -- interrupts: interrupt mapping for IRQ - -Example: - -pressure@77 { - compatible = "bosch,bmp085"; - reg = <0x77>; - chip-id = <10>; - temp-measurement-period = <100>; - default-oversampling = <2>; - interrupt-parent = <&gpio0>; - interrupts = <25 IRQ_TYPE_EDGE_RISING>; -}; diff --git a/Documentation/devicetree/bindings/misc/lis302.txt b/Documentation/devicetree/bindings/misc/lis302.txt deleted file mode 100644 index 2a19bff9693f..000000000000 --- a/Documentation/devicetree/bindings/misc/lis302.txt +++ /dev/null @@ -1,119 +0,0 @@ -LIS302 accelerometer devicetree bindings - -This device is matched via its bus drivers, and has a number of properties -that apply in on the generic device (independent from the bus). - - -Required properties for the SPI bindings: - - compatible: should be set to "st,lis3lv02d_spi" - - reg: the chipselect index - - spi-max-frequency: maximal bus speed, should be set to 1000000 unless - constrained by external circuitry - - interrupts: the interrupt generated by the device - -Required properties for the I2C bindings: - - compatible: should be set to "st,lis3lv02d" - - reg: i2c slave address - - Vdd-supply: The input supply for Vdd - - Vdd_IO-supply: The input supply for Vdd_IO - - -Optional properties for all bus drivers: - - - st,click-single-{x,y,z}: if present, tells the device to issue an - interrupt on single click events on the - x/y/z axis. - - st,click-double-{x,y,z}: if present, tells the device to issue an - interrupt on double click events on the - x/y/z axis. - - st,click-thresh-{x,y,z}: set the x/y/z axis threshold - - st,click-click-time-limit: click time limit, from 0 to 127.5msec - with step of 0.5 msec - - st,click-latency: click latency, from 0 to 255 msec with - step of 1 msec. - - st,click-window: click window, from 0 to 255 msec with - step of 1 msec. - - st,irq{1,2}-disable: disable IRQ 1/2 - - st,irq{1,2}-ff-wu-1: raise IRQ 1/2 on FF_WU_1 condition - - st,irq{1,2}-ff-wu-2: raise IRQ 1/2 on FF_WU_2 condition - - st,irq{1,2}-data-ready: raise IRQ 1/2 on data ready contition - - st,irq{1,2}-click: raise IRQ 1/2 on click condition - - st,irq-open-drain: consider IRQ lines open-drain - - st,irq-active-low: make IRQ lines active low - - st,wu-duration-1: duration register for Free-Fall/Wake-Up - interrupt 1 - - st,wu-duration-2: duration register for Free-Fall/Wake-Up - interrupt 2 - - st,wakeup-{x,y,z}-{lo,hi}: set wakeup condition on x/y/z axis for - upper/lower limit - - st,wakeup-threshold: set wakeup threshold - - st,wakeup2-{x,y,z}-{lo,hi}: set wakeup condition on x/y/z axis for - upper/lower limit for second wakeup - engine. - - st,wakeup2-threshold: set wakeup threshold for second wakeup - engine. - - st,highpass-cutoff-hz=: 1, 2, 4 or 8 for 1Hz, 2Hz, 4Hz or 8Hz of - highpass cut-off frequency - - st,hipass{1,2}-disable: disable highpass 1/2. - - st,default-rate=: set the default rate - - st,axis-{x,y,z}=: set the axis to map to the three coordinates. - Negative values can be used for inverted axis. - - st,{min,max}-limit-{x,y,z} set the min/max limits for x/y/z axis - (used by self-test) - - -Example for a SPI device node: - - lis302@0 { - compatible = "st,lis302dl-spi"; - reg = <0>; - spi-max-frequency = <1000000>; - interrupt-parent = <&gpio>; - interrupts = <104 0>; - - st,click-single-x; - st,click-single-y; - st,click-single-z; - st,click-thresh-x = <10>; - st,click-thresh-y = <10>; - st,click-thresh-z = <10>; - st,irq1-click; - st,irq2-click; - st,wakeup-x-lo; - st,wakeup-x-hi; - st,wakeup-y-lo; - st,wakeup-y-hi; - st,wakeup-z-lo; - st,wakeup-z-hi; - }; - -Example for a I2C device node: - - lis331dlh: lis331dlh@18 { - compatible = "st,lis331dlh", "st,lis3lv02d"; - reg = <0x18>; - Vdd-supply = <&lis3_reg>; - Vdd_IO-supply = <&lis3_reg>; - - st,click-single-x; - st,click-single-y; - st,click-single-z; - st,click-thresh-x = <10>; - st,click-thresh-y = <10>; - st,click-thresh-z = <10>; - st,irq1-click; - st,irq2-click; - st,wakeup-x-lo; - st,wakeup-x-hi; - st,wakeup-y-lo; - st,wakeup-y-hi; - st,wakeup-z-lo; - st,wakeup-z-hi; - st,min-limit-x = <120>; - st,min-limit-y = <120>; - st,min-limit-z = <140>; - st,max-limit-x = <550>; - st,max-limit-y = <550>; - st,max-limit-z = <750>; - }; - diff --git a/Documentation/devicetree/bindings/misc/ti,dac7512.txt b/Documentation/devicetree/bindings/misc/ti,dac7512.txt deleted file mode 100644 index 1db45939dac9..000000000000 --- a/Documentation/devicetree/bindings/misc/ti,dac7512.txt +++ /dev/null @@ -1,20 +0,0 @@ -TI DAC7512 DEVICETREE BINDINGS - -Required properties: - - - "compatible" Must be set to "ti,dac7512" - -Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt -apply. In particular, "reg" and "spi-max-frequency" properties must be given. - - -Example: - - spi_master { - dac7512: dac7512@0 { - compatible = "ti,dac7512"; - reg = <0>; /* CS0 */ - spi-max-frequency = <1000000>; - }; - }; - diff --git a/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt b/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt deleted file mode 100644 index 5ae601e7f51f..000000000000 --- a/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt +++ /dev/null @@ -1,21 +0,0 @@ -NVIDIA compliant embedded controller - -Required properties: -- compatible : should be "nvidia,nvec". -- reg : the iomem of the i2c slave controller -- interrupts : the interrupt line of the i2c slave controller -- clock-frequency : the frequency of the i2c bus -- gpios : the gpio used for ec request -- slave-addr: the i2c address of the slave controller -- clocks : Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names : Must include the following entries: - Tegra20/Tegra30: - - div-clk - - fast-clk - Tegra114: - - div-clk -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: - - i2c diff --git a/Documentation/devicetree/bindings/open-pic.txt b/Documentation/devicetree/bindings/open-pic.txt deleted file mode 100644 index 909a902dff85..000000000000 --- a/Documentation/devicetree/bindings/open-pic.txt +++ /dev/null @@ -1,98 +0,0 @@ -* Open PIC Binding - -This binding specifies what properties must be available in the device tree -representation of an Open PIC compliant interrupt controller. This binding is -based on the binding defined for Open PIC in [1] and is a superset of that -binding. - -Required properties: - - NOTE: Many of these descriptions were paraphrased here from [1] to aid - readability. - - - compatible: Specifies the compatibility list for the PIC. The type - shall be and the value shall include "open-pic". - - - reg: Specifies the base physical address(s) and size(s) of this - PIC's addressable register space. The type shall be . - - - interrupt-controller: The presence of this property identifies the node - as an Open PIC. No property value shall be defined. - - - #interrupt-cells: Specifies the number of cells needed to encode an - interrupt source. The type shall be a and the value shall be 2. - - - #address-cells: Specifies the number of cells needed to encode an - address. The type shall be and the value shall be 0. As such, - 'interrupt-map' nodes do not have to specify a parent unit address. - -Optional properties: - - - pic-no-reset: The presence of this property indicates that the PIC - shall not be reset during runtime initialization. No property value shall - be defined. The presence of this property also mandates that any - initialization related to interrupt sources shall be limited to sources - explicitly referenced in the device tree. - -* Interrupt Specifier Definition - - Interrupt specifiers consists of 2 cells encoded as - follows: - - - <1st-cell>: The interrupt-number that identifies the interrupt source. - - - <2nd-cell>: The level-sense information, encoded as follows: - 0 = low-to-high edge triggered - 1 = active low level-sensitive - 2 = active high level-sensitive - 3 = high-to-low edge triggered - -* Examples - -Example 1: - - /* - * An Open PIC interrupt controller - */ - mpic: pic@40000 { - // This is an interrupt controller node. - interrupt-controller; - - // No address cells so that 'interrupt-map' nodes which reference - // this Open PIC node do not need a parent address specifier. - #address-cells = <0>; - - // Two cells to encode interrupt sources. - #interrupt-cells = <2>; - - // Offset address of 0x40000 and size of 0x40000. - reg = <0x40000 0x40000>; - - // Compatible with Open PIC. - compatible = "open-pic"; - - // The PIC shall not be reset. - pic-no-reset; - }; - -Example 2: - - /* - * An interrupt generating device that is wired to an Open PIC. - */ - serial0: serial@4500 { - // Interrupt source '42' that is active high level-sensitive. - // Note that there are only two cells as specified in the interrupt - // parent's '#interrupt-cells' property. - interrupts = <42 2>; - - // The interrupt controller that this device is wired to. - interrupt-parent = <&mpic>; - }; - -* References - -[1] Power.org (TM) Standard for Embedded Power Architecture (TM) Platform - Requirements (ePAPR), Version 1.0, July 2008. - (http://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf) - -- cgit v1.2.1