From cf091ee994ec266e33c3a305d6fc8c5ccb1f8acd Mon Sep 17 00:00:00 2001 From: Robin van der Gracht Date: Fri, 3 Mar 2017 15:14:05 +0100 Subject: clk: imx: clk-imx6ul: The i.mx6ul has no aips_tz3 clock The clock was mapped on CG15 (gpio2_clocks) in the CCRG0 register. Reviewed-by: Fabio Estevam Signed-off-by: Robin van der Gracht Signed-off-by: Stephen Boyd Signed-off-by: Michael Turquette --- drivers/clk/imx/clk-imx6ul.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c index 75c35fb12b60..dbd6e59377c3 100644 --- a/drivers/clk/imx/clk-imx6ul.c +++ b/drivers/clk/imx/clk-imx6ul.c @@ -73,7 +73,7 @@ static struct clk *clks[IMX6UL_CLK_END]; static struct clk_onecell_data clk_data; static int const clks_init_on[] __initconst = { - IMX6UL_CLK_AIPSTZ1, IMX6UL_CLK_AIPSTZ2, IMX6UL_CLK_AIPSTZ3, + IMX6UL_CLK_AIPSTZ1, IMX6UL_CLK_AIPSTZ2, IMX6UL_CLK_AXI, IMX6UL_CLK_ARM, IMX6UL_CLK_ROM, IMX6UL_CLK_MMDC_P0_FAST, IMX6UL_CLK_MMDC_P0_IPG, }; @@ -341,9 +341,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node) clks[IMX6UL_CLK_GPT2_SERIAL] = imx_clk_gate2("gpt2_serial", "perclk", base + 0x68, 26); clks[IMX6UL_CLK_UART2_IPG] = imx_clk_gate2("uart2_ipg", "ipg", base + 0x68, 28); clks[IMX6UL_CLK_UART2_SERIAL] = imx_clk_gate2("uart2_serial", "uart_podf", base + 0x68, 28); - if (clk_on_imx6ul()) - clks[IMX6UL_CLK_AIPSTZ3] = imx_clk_gate2("aips_tz3", "ahb", base + 0x68, 30); - else if (clk_on_imx6ull()) + if (clk_on_imx6ull()) clks[IMX6UL_CLK_AIPSTZ3] = imx_clk_gate2("aips_tz3", "ahb", base + 0x80, 18); /* CCGR1 */ @@ -482,6 +480,9 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node) for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) clk_prepare_enable(clks[clks_init_on[i]]); + if (clk_on_imx6ull()) + clk_prepare_enable(clks[IMX6UL_CLK_AIPSTZ3]); + if (IS_ENABLED(CONFIG_USB_MXS_PHY)) { clk_prepare_enable(clks[IMX6UL_CLK_USBPHY1_GATE]); clk_prepare_enable(clks[IMX6UL_CLK_USBPHY2_GATE]); -- cgit v1.2.1