From 2226b1c219a18804bc40e32a5d53c287a6c925d9 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Tue, 6 Jan 2009 17:55:32 +0000 Subject: uwb: safely remove all reservations When removing all reservations during shutdown, terminate them first and then wait for any pending timeout work to complete. This prevents the timeout work from running after the reservation has been freed. Signed-off-by: David Vrabel --- drivers/uwb/rsv.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/drivers/uwb/rsv.c b/drivers/uwb/rsv.c index ec6eecb32f30..886f977cd2ea 100644 --- a/drivers/uwb/rsv.c +++ b/drivers/uwb/rsv.c @@ -114,7 +114,8 @@ void uwb_rsv_dump(char *text, struct uwb_rsv *rsv) devaddr = rsv->target.devaddr; uwb_dev_addr_print(target, sizeof(target), &devaddr); - dev_dbg(dev, "rsv %s -> %s: %s\n", owner, target, uwb_rsv_state_str(rsv->state)); + dev_dbg(dev, "rsv %s %s -> %s: %s\n", + text, owner, target, uwb_rsv_state_str(rsv->state)); } static void uwb_rsv_release(struct kref *kref) @@ -511,8 +512,7 @@ void uwb_rsv_remove(struct uwb_rsv *rsv) if (uwb_rsv_is_owner(rsv)) uwb_rsv_put_stream(rsv); - - del_timer_sync(&rsv->timer); + uwb_dev_put(rsv->owner); if (rsv->target.type == UWB_RSV_TARGET_DEV) uwb_dev_put(rsv->target.dev); @@ -943,13 +943,22 @@ void uwb_rsv_remove_all(struct uwb_rc *rc) mutex_lock(&rc->rsvs_mutex); list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) { - uwb_rsv_remove(rsv); + if (rsv->state != UWB_RSV_STATE_NONE) + uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE); + del_timer_sync(&rsv->timer); } /* Cancel any postponed update. */ rc->set_drp_ie_pending = 0; mutex_unlock(&rc->rsvs_mutex); cancel_delayed_work_sync(&rc->rsv_update_work); + flush_workqueue(rc->rsv_workq); + + mutex_lock(&rc->rsvs_mutex); + list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) { + uwb_rsv_remove(rsv); + } + mutex_unlock(&rc->rsvs_mutex); } void uwb_rsv_init(struct uwb_rc *rc) -- cgit v1.2.1 From 9a9b1d17ba59b78e4bae67f7a7cf546986a42e7d Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Tue, 6 Jan 2009 17:58:02 +0000 Subject: wusb: return -ENOTCONN when resetting a port with no connected device If reading the device descriptor fails during hub_port_init() fails, then the port is disabled, disconnecting the device. The port is then reset at the start of the next init attempt but there is no device to reset. Signed-off-by: David Vrabel --- drivers/usb/wusbcore/devconnect.c | 1 + drivers/usb/wusbcore/rh.c | 3 +++ 2 files changed, 4 insertions(+) diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c index e2e7e4bc8463..8e18141bb2e0 100644 --- a/drivers/usb/wusbcore/devconnect.c +++ b/drivers/usb/wusbcore/devconnect.c @@ -386,6 +386,7 @@ static void __wusbhc_dev_disconnect(struct wusbhc *wusbhc, | USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED); port->change |= USB_PORT_STAT_C_CONNECTION | USB_PORT_STAT_C_ENABLE; if (wusb_dev) { + dev_dbg(wusbhc->dev, "disconnecting device from port %d\n", wusb_dev->port_idx); if (!list_empty(&wusb_dev->cack_node)) list_del_init(&wusb_dev->cack_node); /* For the one in cack_add() */ diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c index 95c6fa3bf6b2..407a9fcc89cc 100644 --- a/drivers/usb/wusbcore/rh.c +++ b/drivers/usb/wusbcore/rh.c @@ -100,6 +100,9 @@ static int wusbhc_rh_port_reset(struct wusbhc *wusbhc, u8 port_idx) struct wusb_port *port = wusb_port_by_idx(wusbhc, port_idx); struct wusb_dev *wusb_dev = port->wusb_dev; + if (wusb_dev == NULL) + return -ENOTCONN; + port->status |= USB_PORT_STAT_RESET; port->change |= USB_PORT_STAT_C_RESET; -- cgit v1.2.1 From 04c470adb01c62bb9bd663cfc4875cf0a4eb01ab Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Sun, 4 Jan 2009 11:13:50 +0800 Subject: uwb: remove unused #include 's Remove unused #include 's in file(s) below, drivers/uwb/allocator.c Signed-off-by: Huang Weiyi Signed-off-by: David Vrabel --- drivers/uwb/allocator.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/uwb/allocator.c b/drivers/uwb/allocator.c index c8185e6b0cd5..c13cec7dcbc5 100644 --- a/drivers/uwb/allocator.c +++ b/drivers/uwb/allocator.c @@ -15,7 +15,6 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#include #include #include -- cgit v1.2.1 From a5e6ced58d423cb09c4fc0087dcfdb0b5deb5e1c Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Wed, 7 Jan 2009 10:54:22 +0000 Subject: wusb: timeout when waiting for ASL/PZL updates in whci-hcd Timeout if an ASL or PZL update doesn't not complete and reset the hardware. Signed-off-by: David Vrabel --- drivers/usb/host/whci/asl.c | 9 +++++++-- drivers/usb/host/whci/hw.c | 15 +++++++++++++++ drivers/usb/host/whci/pzl.c | 9 +++++++-- drivers/usb/host/whci/whcd.h | 1 + 4 files changed, 30 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c index 577c0d29849d..2291c5f5af51 100644 --- a/drivers/usb/host/whci/asl.c +++ b/drivers/usb/host/whci/asl.c @@ -170,12 +170,17 @@ void asl_stop(struct whc *whc) void asl_update(struct whc *whc, uint32_t wusbcmd) { struct wusbhc *wusbhc = &whc->wusbhc; + long t; mutex_lock(&wusbhc->mutex); if (wusbhc->active) { whc_write_wusbcmd(whc, wusbcmd, wusbcmd); - wait_event(whc->async_list_wq, - (le_readl(whc->base + WUSBCMD) & WUSBCMD_ASYNC_UPDATED) == 0); + t = wait_event_timeout( + whc->async_list_wq, + (le_readl(whc->base + WUSBCMD) & WUSBCMD_ASYNC_UPDATED) == 0, + msecs_to_jiffies(1000)); + if (t == 0) + whc_hw_error(whc, "ASL update timeout"); } mutex_unlock(&wusbhc->mutex); } diff --git a/drivers/usb/host/whci/hw.c b/drivers/usb/host/whci/hw.c index d498e7203217..6afa2e379160 100644 --- a/drivers/usb/host/whci/hw.c +++ b/drivers/usb/host/whci/hw.c @@ -87,3 +87,18 @@ out: return ret; } + +/** + * whc_hw_error - recover from a hardware error + * @whc: the WHCI HC that broke. + * @reason: a description of the failure. + * + * Recover from broken hardware with a full reset. + */ +void whc_hw_error(struct whc *whc, const char *reason) +{ + struct wusbhc *wusbhc = &whc->wusbhc; + + dev_err(&whc->umc->dev, "hardware error: %s\n", reason); + wusbhc_reset_all(wusbhc); +} diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c index 2ae5abf69a6a..7dc85a0bee7c 100644 --- a/drivers/usb/host/whci/pzl.c +++ b/drivers/usb/host/whci/pzl.c @@ -183,12 +183,17 @@ void pzl_stop(struct whc *whc) void pzl_update(struct whc *whc, uint32_t wusbcmd) { struct wusbhc *wusbhc = &whc->wusbhc; + long t; mutex_lock(&wusbhc->mutex); if (wusbhc->active) { whc_write_wusbcmd(whc, wusbcmd, wusbcmd); - wait_event(whc->periodic_list_wq, - (le_readl(whc->base + WUSBCMD) & WUSBCMD_PERIODIC_UPDATED) == 0); + t = wait_event_timeout( + whc->periodic_list_wq, + (le_readl(whc->base + WUSBCMD) & WUSBCMD_PERIODIC_UPDATED) == 0, + msecs_to_jiffies(1000)); + if (t == 0) + whc_hw_error(whc, "PZL update timeout"); } mutex_unlock(&wusbhc->mutex); } diff --git a/drivers/usb/host/whci/whcd.h b/drivers/usb/host/whci/whcd.h index 0f3540f04f53..d3543a181dc9 100644 --- a/drivers/usb/host/whci/whcd.h +++ b/drivers/usb/host/whci/whcd.h @@ -137,6 +137,7 @@ void whc_clean_up(struct whc *whc); /* hw.c */ void whc_write_wusbcmd(struct whc *whc, u32 mask, u32 val); int whc_do_gencmd(struct whc *whc, u32 cmd, u32 params, void *addr, size_t len); +void whc_hw_error(struct whc *whc, const char *reason); /* wusb.c */ int whc_wusbhc_start(struct wusbhc *wusbhc); -- cgit v1.2.1 From c225aa57ff4ffe715df4692676b77c815a337236 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Simon=20Holm=20Th=C3=B8gersen?= Date: Sun, 11 Jan 2009 22:34:01 -0500 Subject: ext4: fix wrong use of do_div MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit the following warning: fs/jbd2/journal.c: In function ‘jbd2_seq_info_show’: fs/jbd2/journal.c:850: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 3 has type ‘uint32_t’ is caused by wrong usage of do_div that modifies the dividend in-place and returns the quotient. So not only would an incorrect value be displayed, but s->journal->j_average_commit_time would also be changed to a wrong value! Fix it by using div_u64 instead. Signed-off-by: Simon Holm Thøgersen Signed-off-by: "Theodore Ts'o" --- fs/jbd2/journal.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index 56675306ed81..eb343008eded 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -37,10 +37,10 @@ #include #include #include +#include #include #include -#include EXPORT_SYMBOL(jbd2_journal_start); EXPORT_SYMBOL(jbd2_journal_restart); @@ -846,8 +846,8 @@ static int jbd2_seq_info_show(struct seq_file *seq, void *v) jiffies_to_msecs(s->stats->u.run.rs_flushing / s->stats->ts_tid)); seq_printf(seq, " %ums logging transaction\n", jiffies_to_msecs(s->stats->u.run.rs_logging / s->stats->ts_tid)); - seq_printf(seq, " %luus average transaction commit time\n", - do_div(s->journal->j_average_commit_time, 1000)); + seq_printf(seq, " %lluus average transaction commit time\n", + div_u64(s->journal->j_average_commit_time, 1000)); seq_printf(seq, " %lu handles per transaction\n", s->stats->u.run.rs_handle_count / s->stats->ts_tid); seq_printf(seq, " %lu blocks per transaction\n", -- cgit v1.2.1 From 14819ea1e0bcbdc9b084cd60a6a24d5d786324ef Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 14 Jan 2009 12:34:21 +0100 Subject: irq: export __set_irq_handler() and handle_level_irq() Impact: build fix ARM updates broke x86 allmodconfig builds: ERROR: "__set_irq_handler" [drivers/mfd/pcf50633-core.ko] undefined! ERROR: "handle_level_irq" [drivers/mfd/pcf50633-core.ko] undefined! Signed-off-by: Ingo Molnar --- kernel/irq/chip.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c index f63c706d25e1..7de11bd64dfe 100644 --- a/kernel/irq/chip.c +++ b/kernel/irq/chip.c @@ -383,6 +383,7 @@ handle_level_irq(unsigned int irq, struct irq_desc *desc) out_unlock: spin_unlock(&desc->lock); } +EXPORT_SYMBOL_GPL(handle_level_irq); /** * handle_fasteoi_irq - irq handler for transparent controllers @@ -593,6 +594,7 @@ __set_irq_handler(unsigned int irq, irq_flow_handler_t handle, int is_chained, } spin_unlock_irqrestore(&desc->lock, flags); } +EXPORT_SYMBOL_GPL(__set_irq_handler); void set_irq_chip_and_handler(unsigned int irq, struct irq_chip *chip, -- cgit v1.2.1 From 06a279d636734da32bb62dd2f7b0ade666f65d7c Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 17 Jan 2009 18:41:37 -0500 Subject: ext4: only use i_size_high for regular files Directories are not allowed to be bigger than 2GB, so don't use i_size_high for anything other than regular files. E2fsck should complain about these inodes, but the simplest thing to do for the kernel is to only use i_size_high for regular files. This prevents an intentially corrupted filesystem from causing the kernel to burn a huge amount of CPU and issuing error messages such as: EXT4-fs warning (device loop0): ext4_block_to_path: block 135090028 > max Thanks to David Maciejak from Fortinet's FortiGuard Global Security Research Team for reporting this issue. http://bugzilla.kernel.org/show_bug.cgi?id=12375 Signed-off-by: "Theodore Ts'o" Cc: stable@kernel.org --- fs/ext4/ext4.h | 7 +++++-- fs/ext4/inode.c | 4 ++-- 2 files changed, 7 insertions(+), 4 deletions(-) diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index c668e4377d76..aafc9eba1c25 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -1206,8 +1206,11 @@ static inline void ext4_r_blocks_count_set(struct ext4_super_block *es, static inline loff_t ext4_isize(struct ext4_inode *raw_inode) { - return ((loff_t)le32_to_cpu(raw_inode->i_size_high) << 32) | - le32_to_cpu(raw_inode->i_size_lo); + if (S_ISREG(le16_to_cpu(raw_inode->i_mode))) + return ((loff_t)le32_to_cpu(raw_inode->i_size_high) << 32) | + le32_to_cpu(raw_inode->i_size_lo); + else + return (loff_t) le32_to_cpu(raw_inode->i_size_lo); } static inline void ext4_isize_set(struct ext4_inode *raw_inode, loff_t i_size) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index a6444cee0c7e..49484ba801c9 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -360,9 +360,9 @@ static int ext4_block_to_path(struct inode *inode, final = ptrs; } else { ext4_warning(inode->i_sb, "ext4_block_to_path", - "block %lu > max", + "block %lu > max in inode %lu", i_block + direct_blocks + - indirect_blocks + double_blocks); + indirect_blocks + double_blocks, inode->i_ino); } if (boundary) *boundary = final - 1 - (i_block & (ptrs - 1)); -- cgit v1.2.1 From e6b8bc09ba2075cd91fbffefcd2778b1a00bd76f Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 16 Jan 2009 11:13:40 -0500 Subject: ext4: Add sanity check to make_indexed_dir Make sure the rec_len field in the '..' entry is sane, lest we overrun the directory block and cause a kernel oops on a purposefully corrupted filesystem. Thanks to Sami Liedes for reporting this bug. http://bugzilla.kernel.org/show_bug.cgi?id=12430 Signed-off-by: "Theodore Ts'o" Cc: stable@kernel.org --- fs/ext4/namei.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index fec0b4c2f5f1..ba702bd7910d 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -1368,7 +1368,7 @@ static int make_indexed_dir(handle_t *handle, struct dentry *dentry, struct fake_dirent *fde; blocksize = dir->i_sb->s_blocksize; - dxtrace(printk(KERN_DEBUG "Creating index\n")); + dxtrace(printk(KERN_DEBUG "Creating index: inode %lu\n", dir->i_ino)); retval = ext4_journal_get_write_access(handle, bh); if (retval) { ext4_std_error(dir->i_sb, retval); @@ -1377,6 +1377,20 @@ static int make_indexed_dir(handle_t *handle, struct dentry *dentry, } root = (struct dx_root *) bh->b_data; + /* The 0th block becomes the root, move the dirents out */ + fde = &root->dotdot; + de = (struct ext4_dir_entry_2 *)((char *)fde + + ext4_rec_len_from_disk(fde->rec_len)); + if ((char *) de >= (((char *) root) + blocksize)) { + ext4_error(dir->i_sb, __func__, + "invalid rec_len for '..' in inode %lu", + dir->i_ino); + brelse(bh); + return -EIO; + } + len = ((char *) root) + blocksize - (char *) de; + + /* Allocate new block for the 0th block's dirents */ bh2 = ext4_append(handle, dir, &block, &retval); if (!(bh2)) { brelse(bh); @@ -1385,11 +1399,6 @@ static int make_indexed_dir(handle_t *handle, struct dentry *dentry, EXT4_I(dir)->i_flags |= EXT4_INDEX_FL; data1 = bh2->b_data; - /* The 0th block becomes the root, move the dirents out */ - fde = &root->dotdot; - de = (struct ext4_dir_entry_2 *)((char *)fde + - ext4_rec_len_from_disk(fde->rec_len)); - len = ((char *) root) + blocksize - (char *) de; memcpy (data1, de, len); de = (struct ext4_dir_entry_2 *) data1; top = data1 + len; -- cgit v1.2.1 From a21102b55c4f8dfd3adb4a15a34cd62237b46039 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 16 Jan 2009 11:13:47 -0500 Subject: ext3: Add sanity check to make_indexed_dir Make sure the rec_len field in the '..' entry is sane, lest we overrun the directory block and cause a kernel oops on a purposefully corrupted filesystem. This fixes a bug related to a bug originally reported by Sami Liedes for ext4 at: http://bugzilla.kernel.org/show_bug.cgi?id=12430 Signed-off-by: "Theodore Ts'o" Cc: stable@kernel.org --- fs/ext3/namei.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c index 69a3d19ca9fd..4db4ffa1edad 100644 --- a/fs/ext3/namei.c +++ b/fs/ext3/namei.c @@ -1358,7 +1358,7 @@ static int make_indexed_dir(handle_t *handle, struct dentry *dentry, struct fake_dirent *fde; blocksize = dir->i_sb->s_blocksize; - dxtrace(printk("Creating index\n")); + dxtrace(printk(KERN_DEBUG "Creating index: inode %lu\n", dir->i_ino)); retval = ext3_journal_get_write_access(handle, bh); if (retval) { ext3_std_error(dir->i_sb, retval); @@ -1367,6 +1367,19 @@ static int make_indexed_dir(handle_t *handle, struct dentry *dentry, } root = (struct dx_root *) bh->b_data; + /* The 0th block becomes the root, move the dirents out */ + fde = &root->dotdot; + de = (struct ext3_dir_entry_2 *)((char *)fde + + ext3_rec_len_from_disk(fde->rec_len)); + if ((char *) de >= (((char *) root) + blocksize)) { + ext3_error(dir->i_sb, __func__, + "invalid rec_len for '..' in inode %lu", + dir->i_ino); + brelse(bh); + return -EIO; + } + len = ((char *) root) + blocksize - (char *) de; + bh2 = ext3_append (handle, dir, &block, &retval); if (!(bh2)) { brelse(bh); @@ -1375,11 +1388,6 @@ static int make_indexed_dir(handle_t *handle, struct dentry *dentry, EXT3_I(dir)->i_flags |= EXT3_INDEX_FL; data1 = bh2->b_data; - /* The 0th block becomes the root, move the dirents out */ - fde = &root->dotdot; - de = (struct ext3_dir_entry_2 *)((char *)fde + - ext3_rec_len_from_disk(fde->rec_len)); - len = ((char *) root) + blocksize - (char *) de; memcpy (data1, de, len); de = (struct ext3_dir_entry_2 *) data1; top = data1 + len; -- cgit v1.2.1 From 08ec8c3878cea0bf91f2ba3c0badf44b383752d0 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 16 Jan 2009 11:57:00 -0500 Subject: jbd2: On a __journal_expect() assertion failure printk "JBD2", not "EXT3-fs" Otherwise it can be very confusing to find a "EXT3-fs: " failure in the middle of EXT4-fs failures, and it makes it harder to track the source of the failure. Signed-off-by: "Theodore Ts'o" --- include/linux/jbd2.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index b45109c61fba..b28b37eb11c6 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -308,7 +308,8 @@ void buffer_assertion_failure(struct buffer_head *bh); int val = (expr); \ if (!val) { \ printk(KERN_ERR \ - "EXT3-fs unexpected failure: %s;\n",# expr); \ + "JBD2 unexpected failure: %s: %s;\n", \ + __func__, #expr); \ printk(KERN_ERR why "\n"); \ } \ val; \ -- cgit v1.2.1 From 141e6ebd1b1759bd5cebf092b7216b6f1c7b4c4f Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Mon, 5 Jan 2009 14:44:11 +0100 Subject: UBI: add ioctl for map operation This patch adds ioctl for the LEB map operation (as a debugging option so far). [Re-named ioctl to make it look the same as the other one and made some minor stylistic changes. Artem Bityutskiy.] Signed-off-by: Corentin Chary Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/cdev.c | 14 ++++++++++++++ include/mtd/ubi-user.h | 15 +++++++++++++++ 2 files changed, 29 insertions(+) diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index 98cf31ed0814..055e3f563c13 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -518,6 +518,20 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file, err = ubi_wl_flush(ubi); break; } + + /* Logical eraseblock map command */ + case UBI_IOCEBMAP: + { + struct ubi_map_req req; + + err = copy_from_user(&req, argp, sizeof(struct ubi_map_req)); + if (err) { + err = -EFAULT; + break; + } + err = ubi_leb_map(desc, req.lnum, req.dtype); + break; + } #endif default: diff --git a/include/mtd/ubi-user.h b/include/mtd/ubi-user.h index 2dc2eb2b8e22..758574039fca 100644 --- a/include/mtd/ubi-user.h +++ b/include/mtd/ubi-user.h @@ -133,6 +133,9 @@ #define UBI_IOCEBER _IOW(UBI_VOL_IOC_MAGIC, 1, int32_t) /* An atomic eraseblock change command */ #define UBI_IOCEBCH _IOW(UBI_VOL_IOC_MAGIC, 2, int32_t) +/* Map an eraseblock, used for debugging, disabled by default */ +#define UBI_IOCEBMAP _IOW(UBI_VOL_IOC_MAGIC, 3, struct ubi_map_req) + /* Maximum MTD device name length supported by UBI */ #define MAX_UBI_MTD_NAME_LEN 127 @@ -319,4 +322,16 @@ struct ubi_leb_change_req { int8_t padding[7]; } __attribute__ ((packed)); +/** + * struct ubi_map_req - a data structure used in map eraseblock requests. + * @lnum: logical eraseblock number to unmap + * @dtype: data type (%UBI_LONGTERM, %UBI_SHORTTERM, %UBI_UNKNOWN) + * @padding: reserved for future, not used, has to be zeroed + */ +struct ubi_map_req { + int32_t lnum; + int8_t dtype; + int8_t padding[3]; +} __attribute__ ((packed)); + #endif /* __UBI_USER_H__ */ -- cgit v1.2.1 From c3da23be1673be4e738aea235604b4e6cb259655 Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Mon, 5 Jan 2009 14:46:19 +0100 Subject: UBI: add ioctl for unmap operation This patch adds ioctl for the LEB unmap operation (as a debugging option so far). [Re-named ioctl to make it look the same as the other one and made some minor stylistic changes. Artem Bityutskiy.] Signed-off-by: Corentin Chary Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/cdev.c | 15 ++++++++++++++- include/mtd/ubi-user.h | 3 ++- 2 files changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index 055e3f563c13..fd7e0f923b38 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -532,13 +532,26 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file, err = ubi_leb_map(desc, req.lnum, req.dtype); break; } + + /* Logical eraseblock un-map command */ + case UBI_IOCEBUNMAP: + { + int32_t lnum; + + err = get_user(lnum, (__user int32_t *)argp); + if (err) { + err = -EFAULT; + break; + } + err = ubi_leb_unmap(desc, lnum); + break; + } #endif default: err = -ENOTTY; break; } - return err; } diff --git a/include/mtd/ubi-user.h b/include/mtd/ubi-user.h index 758574039fca..ee2ea2e224af 100644 --- a/include/mtd/ubi-user.h +++ b/include/mtd/ubi-user.h @@ -135,7 +135,8 @@ #define UBI_IOCEBCH _IOW(UBI_VOL_IOC_MAGIC, 2, int32_t) /* Map an eraseblock, used for debugging, disabled by default */ #define UBI_IOCEBMAP _IOW(UBI_VOL_IOC_MAGIC, 3, struct ubi_map_req) - +/* Unmap an eraseblock, used for debugging, disabled by default */ +#define UBI_IOCEBUNMAP _IOW(UBI_VOL_IOC_MAGIC, 4, int32_t) /* Maximum MTD device name length supported by UBI */ #define MAX_UBI_MTD_NAME_LEN 127 -- cgit v1.2.1 From a27ce8f55dd5fddf0b8ea179cce8f399c13dc94f Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Mon, 5 Jan 2009 14:48:59 +0100 Subject: UBI: add ioctl for is_mapped operation This patch adds ioctl to check if an LEB is mapped or not (as a debugging option so far). [Re-named ioctl to make it look the same as the other one and made some minor stylistic changes. Artem Bityutskiy.] Signed-off-by: Corentin Chary Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/cdev.c | 14 ++++++++++++++ include/mtd/ubi-user.h | 2 ++ 2 files changed, 16 insertions(+) diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index fd7e0f923b38..9ddbade72887 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -546,6 +546,20 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file, err = ubi_leb_unmap(desc, lnum); break; } + + /* Check if logical eraseblock is mapped command */ + case UBI_IOCEBISMAP: + { + int32_t lnum; + + err = get_user(lnum, (__user int32_t *)argp); + if (err) { + err = -EFAULT; + break; + } + err = ubi_is_mapped(desc, lnum); + break; + } #endif default: diff --git a/include/mtd/ubi-user.h b/include/mtd/ubi-user.h index ee2ea2e224af..5828d7879199 100644 --- a/include/mtd/ubi-user.h +++ b/include/mtd/ubi-user.h @@ -137,6 +137,8 @@ #define UBI_IOCEBMAP _IOW(UBI_VOL_IOC_MAGIC, 3, struct ubi_map_req) /* Unmap an eraseblock, used for debugging, disabled by default */ #define UBI_IOCEBUNMAP _IOW(UBI_VOL_IOC_MAGIC, 4, int32_t) +/* Check if an eraseblock is mapped, used for debugging, disabled by default */ +#define UBI_IOCEBISMAP _IOR(UBI_VOL_IOC_MAGIC, 5, int32_t) /* Maximum MTD device name length supported by UBI */ #define MAX_UBI_MTD_NAME_LEN 127 -- cgit v1.2.1 From f7fc6f3f33703e3365c0ef9d4bf322b88cc9dae7 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 7 Jan 2009 16:10:58 +0200 Subject: UBI: improve ioctl commentaries Signed-off-by: Artem Bityutskiy --- include/mtd/ubi-user.h | 88 +++++++++++++++++++++++++++++++++++--------------- 1 file changed, 62 insertions(+), 26 deletions(-) diff --git a/include/mtd/ubi-user.h b/include/mtd/ubi-user.h index 5828d7879199..82113e160a2c 100644 --- a/include/mtd/ubi-user.h +++ b/include/mtd/ubi-user.h @@ -40,37 +40,37 @@ * UBI volume creation * ~~~~~~~~~~~~~~~~~~~ * - * UBI volumes are created via the %UBI_IOCMKVOL IOCTL command of UBI character + * UBI volumes are created via the %UBI_IOCMKVOL ioctl command of UBI character * device. A &struct ubi_mkvol_req object has to be properly filled and a - * pointer to it has to be passed to the IOCTL. + * pointer to it has to be passed to the ioctl. * * UBI volume deletion * ~~~~~~~~~~~~~~~~~~~ * - * To delete a volume, the %UBI_IOCRMVOL IOCTL command of the UBI character + * To delete a volume, the %UBI_IOCRMVOL ioctl command of the UBI character * device should be used. A pointer to the 32-bit volume ID hast to be passed - * to the IOCTL. + * to the ioctl. * * UBI volume re-size * ~~~~~~~~~~~~~~~~~~ * - * To re-size a volume, the %UBI_IOCRSVOL IOCTL command of the UBI character + * To re-size a volume, the %UBI_IOCRSVOL ioctl command of the UBI character * device should be used. A &struct ubi_rsvol_req object has to be properly - * filled and a pointer to it has to be passed to the IOCTL. + * filled and a pointer to it has to be passed to the ioctl. * * UBI volumes re-name * ~~~~~~~~~~~~~~~~~~~ * * To re-name several volumes atomically at one go, the %UBI_IOCRNVOL command * of the UBI character device should be used. A &struct ubi_rnvol_req object - * has to be properly filled and a pointer to it has to be passed to the IOCTL. + * has to be properly filled and a pointer to it has to be passed to the ioctl. * * UBI volume update * ~~~~~~~~~~~~~~~~~ * - * Volume update should be done via the %UBI_IOCVOLUP IOCTL command of the + * Volume update should be done via the %UBI_IOCVOLUP ioctl command of the * corresponding UBI volume character device. A pointer to a 64-bit update - * size should be passed to the IOCTL. After this, UBI expects user to write + * size should be passed to the ioctl. After this, UBI expects user to write * this number of bytes to the volume character device. The update is finished * when the claimed number of bytes is passed. So, the volume update sequence * is something like: @@ -80,14 +80,50 @@ * write(fd, buf, image_size); * close(fd); * - * Atomic eraseblock change + * Logical eraseblock erase * ~~~~~~~~~~~~~~~~~~~~~~~~ * - * Atomic eraseblock change operation is done via the %UBI_IOCEBCH IOCTL - * command of the corresponding UBI volume character device. A pointer to - * &struct ubi_leb_change_req has to be passed to the IOCTL. Then the user is - * expected to write the requested amount of bytes. This is similar to the - * "volume update" IOCTL. + * To erase a logical eraseblock, the %UBI_IOCEBER ioctl command of the + * corresponding UBI volume character device should be used. This command + * unmaps the requested logical eraseblock, makes sure the corresponding + * physical eraseblock is successfully erased, and returns. + * + * Atomic logical eraseblock change + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * Atomic logical eraseblock change operation is called using the %UBI_IOCEBCH + * ioctl command of the corresponding UBI volume character device. A pointer to + * a &struct ubi_leb_change_req object has to be passed to the ioctl. Then the + * user is expected to write the requested amount of bytes (similarly to what + * should be done in case of the "volume update" ioctl). + * + * Logical eraseblock map + * ~~~~~~~~~~~~~~~~~~~~~ + * + * To map a logical eraseblock to a physical eraseblock, the %UBI_IOCEBMAP + * ioctl command should be used. A pointer to a &struct ubi_map_req object is + * expected to be passed. The ioctl maps the requested logical eraseblock to + * a physical eraseblock and returns. Only non-mapped logical eraseblocks can + * be mapped. If the logical eraseblock specified in the request is already + * mapped to a physical eraseblock, the ioctl fails and returns error. + * + * Logical eraseblock unmap + * ~~~~~~~~~~~~~~~~~~~~~~~~ + * + * To unmap a logical eraseblock to a physical eraseblock, the %UBI_IOCEBUNMAP + * ioctl command should be used. The ioctl unmaps the logical eraseblocks, + * schedules corresponding physical eraseblock for erasure, and returns. Unlike + * the "LEB erase" command, it does not wait for the physical eraseblock being + * erased. Note, the side effect of this is that if an unclean reboot happens + * after the unmap ioctl returns, you may find the LEB mapped again to the same + * physical eraseblock after the UBI is run again. + * + * Check if logical eraseblock is mapped + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * To check if a logical eraseblock is mapped to a physical eraseblock, the + * %UBI_IOCEBISMAP ioctl command should be used. It returns %0 if the LEB is + * not mapped, and %1 if it is mapped. */ /* @@ -101,7 +137,7 @@ /* Maximum volume name length */ #define UBI_MAX_VOLUME_NAME 127 -/* IOCTL commands of UBI character devices */ +/* ioctl commands of UBI character devices */ #define UBI_IOC_MAGIC 'o' @@ -114,7 +150,7 @@ /* Re-name volumes */ #define UBI_IOCRNVOL _IOW(UBI_IOC_MAGIC, 3, struct ubi_rnvol_req) -/* IOCTL commands of the UBI control character device */ +/* ioctl commands of the UBI control character device */ #define UBI_CTRL_IOC_MAGIC 'o' @@ -123,21 +159,21 @@ /* Detach an MTD device */ #define UBI_IOCDET _IOW(UBI_CTRL_IOC_MAGIC, 65, int32_t) -/* IOCTL commands of UBI volume character devices */ +/* ioctl commands of UBI volume character devices */ #define UBI_VOL_IOC_MAGIC 'O' /* Start UBI volume update */ #define UBI_IOCVOLUP _IOW(UBI_VOL_IOC_MAGIC, 0, int64_t) -/* An eraseblock erasure command, used for debugging, disabled by default */ +/* LEB erasure command, used for debugging, disabled by default */ #define UBI_IOCEBER _IOW(UBI_VOL_IOC_MAGIC, 1, int32_t) -/* An atomic eraseblock change command */ +/* Atomic LEB change command */ #define UBI_IOCEBCH _IOW(UBI_VOL_IOC_MAGIC, 2, int32_t) -/* Map an eraseblock, used for debugging, disabled by default */ +/* Map LEB command */ #define UBI_IOCEBMAP _IOW(UBI_VOL_IOC_MAGIC, 3, struct ubi_map_req) -/* Unmap an eraseblock, used for debugging, disabled by default */ +/* Unmap LEB command */ #define UBI_IOCEBUNMAP _IOW(UBI_VOL_IOC_MAGIC, 4, int32_t) -/* Check if an eraseblock is mapped, used for debugging, disabled by default */ +/* Check if LEB is mapped command */ #define UBI_IOCEBISMAP _IOR(UBI_VOL_IOC_MAGIC, 5, int32_t) /* Maximum MTD device name length supported by UBI */ @@ -311,8 +347,8 @@ struct ubi_rnvol_req { } __attribute__ ((packed)); /** - * struct ubi_leb_change_req - a data structure used in atomic logical - * eraseblock change requests. + * struct ubi_leb_change_req - a data structure used in atomic LEB change + * requests. * @lnum: logical eraseblock number to change * @bytes: how many bytes will be written to the logical eraseblock * @dtype: data type (%UBI_LONGTERM, %UBI_SHORTTERM, %UBI_UNKNOWN) @@ -326,7 +362,7 @@ struct ubi_leb_change_req { } __attribute__ ((packed)); /** - * struct ubi_map_req - a data structure used in map eraseblock requests. + * struct ubi_map_req - a data structure used in map LEB requests. * @lnum: logical eraseblock number to unmap * @dtype: data type (%UBI_LONGTERM, %UBI_SHORTTERM, %UBI_UNKNOWN) * @padding: reserved for future, not used, has to be zeroed -- cgit v1.2.1 From 573135b5dbc02be12940558db23158cc9ee89c66 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Fri, 16 Jan 2009 18:02:08 +0200 Subject: UBI: remove unnecessry header inclusion Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/cdev.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index 9ddbade72887..98cf7a4ceea8 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -40,7 +40,6 @@ #include #include #include -#include #include #include #include "ubi.h" -- cgit v1.2.1 From ade44ce07c9316351ae321051221c9bad3af3a44 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Fri, 16 Jan 2009 18:03:22 +0200 Subject: UBI: allow all ioctls Some ioctl's in UBI are enabled only when debugging is switched on. There is not particular reason for this, just noone needed them. However, some people need the now for their user-space development. Thus, allow these ioctl's even if UBI debugging is disabled. Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/cdev.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index 98cf7a4ceea8..c183be99c6ca 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -486,7 +486,6 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file, break; } -#ifdef CONFIG_MTD_UBI_DEBUG_USERSPACE_IO /* Logical eraseblock erasure command */ case UBI_IOCEBER: { @@ -559,7 +558,6 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file, err = ubi_is_mapped(desc, lnum); break; } -#endif default: err = -ENOTTY; -- cgit v1.2.1 From 4d187a88d3ee3be6a1a0b6859eb00f70e1601b5e Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Sun, 11 Jan 2009 23:55:39 +0100 Subject: UBI: constify file operations Signed-off-by: Jan Engelhardt Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/cdev.c | 6 +++--- drivers/mtd/ubi/ubi.h | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index c183be99c6ca..d99935c0f3c6 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -1025,20 +1025,20 @@ static int ctrl_cdev_ioctl(struct inode *inode, struct file *file, } /* UBI control character device operations */ -struct file_operations ubi_ctrl_cdev_operations = { +const struct file_operations ubi_ctrl_cdev_operations = { .ioctl = ctrl_cdev_ioctl, .owner = THIS_MODULE, }; /* UBI character device operations */ -struct file_operations ubi_cdev_operations = { +const struct file_operations ubi_cdev_operations = { .owner = THIS_MODULE, .ioctl = ubi_cdev_ioctl, .llseek = no_llseek, }; /* UBI volume character device operations */ -struct file_operations ubi_vol_cdev_operations = { +const struct file_operations ubi_vol_cdev_operations = { .owner = THIS_MODULE, .open = vol_cdev_open, .release = vol_cdev_release, diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h index 4a8ec485c91d..381f0e1d0a74 100644 --- a/drivers/mtd/ubi/ubi.h +++ b/drivers/mtd/ubi/ubi.h @@ -449,9 +449,9 @@ struct ubi_device { }; extern struct kmem_cache *ubi_wl_entry_slab; -extern struct file_operations ubi_ctrl_cdev_operations; -extern struct file_operations ubi_cdev_operations; -extern struct file_operations ubi_vol_cdev_operations; +extern const struct file_operations ubi_ctrl_cdev_operations; +extern const struct file_operations ubi_cdev_operations; +extern const struct file_operations ubi_vol_cdev_operations; extern struct class *ubi_class; extern struct mutex ubi_devices_mutex; -- cgit v1.2.1 From f429b2ea8eadb5a576542a70f7fd6f5c2a7455e1 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Fri, 16 Jan 2009 18:06:55 +0200 Subject: UBI: add ioctl compatibility UBI ioctl's do not work when running 64-bit kernel and 32-bit user-land. Fix this by adding the compat_ioctl method. Also, UBI serializes all ioctls, so more than one ioctl at a time is not a problem. Amd UBI does not seem to depend on anything else, so use unlocked_ioctl instead of ioctl (no BKL needed). Reported-by: Geert Uytterhoeven Signed-off-by: Artem Bityutskiy Reviewed-by: Arnd Bergmann --- drivers/mtd/ubi/cdev.c | 80 +++++++++++++++++++++++++++++++++++--------------- 1 file changed, 57 insertions(+), 23 deletions(-) diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index d99935c0f3c6..0a2d835fec80 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -40,6 +40,7 @@ #include #include #include +#include #include #include #include "ubi.h" @@ -401,8 +402,8 @@ static ssize_t vol_cdev_write(struct file *file, const char __user *buf, return count; } -static int vol_cdev_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long vol_cdev_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int err = 0; struct ubi_volume_desc *desc = file->private_data; @@ -800,8 +801,8 @@ out_free: return err; } -static int ubi_cdev_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long ubi_cdev_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int err = 0; struct ubi_device *ubi; @@ -811,7 +812,7 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file, if (!capable(CAP_SYS_RESOURCE)) return -EPERM; - ubi = ubi_get_by_major(imajor(inode)); + ubi = ubi_get_by_major(imajor(file->f_mapping->host)); if (!ubi) return -ENODEV; @@ -947,8 +948,8 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file, return err; } -static int ctrl_cdev_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long ctrl_cdev_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int err = 0; void __user *argp = (void __user *)arg; @@ -1024,26 +1025,59 @@ static int ctrl_cdev_ioctl(struct inode *inode, struct file *file, return err; } -/* UBI control character device operations */ -const struct file_operations ubi_ctrl_cdev_operations = { - .ioctl = ctrl_cdev_ioctl, - .owner = THIS_MODULE, +#ifdef CONFIG_COMPAT +static long vol_cdev_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + unsigned long translated_arg = (unsigned long)compat_ptr(arg); + + return vol_cdev_ioctl(file, cmd, translated_arg); +} + +static long ubi_cdev_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + unsigned long translated_arg = (unsigned long)compat_ptr(arg); + + return ubi_cdev_ioctl(file, cmd, translated_arg); +} + +static long ctrl_cdev_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + unsigned long translated_arg = (unsigned long)compat_ptr(arg); + + return ctrl_cdev_ioctl(file, cmd, translated_arg); +} +#else +#define vol_cdev_compat_ioctl NULL +#define ubi_cdev_compat_ioctl NULL +#define ctrl_cdev_compat_ioctl NULL +#endif + +/* UBI volume character device operations */ +const struct file_operations ubi_vol_cdev_operations = { + .owner = THIS_MODULE, + .open = vol_cdev_open, + .release = vol_cdev_release, + .llseek = vol_cdev_llseek, + .read = vol_cdev_read, + .write = vol_cdev_write, + .unlocked_ioctl = vol_cdev_ioctl, + .compat_ioctl = vol_cdev_compat_ioctl, }; /* UBI character device operations */ const struct file_operations ubi_cdev_operations = { - .owner = THIS_MODULE, - .ioctl = ubi_cdev_ioctl, - .llseek = no_llseek, + .owner = THIS_MODULE, + .llseek = no_llseek, + .unlocked_ioctl = ubi_cdev_ioctl, + .compat_ioctl = ubi_cdev_compat_ioctl, }; -/* UBI volume character device operations */ -const struct file_operations ubi_vol_cdev_operations = { - .owner = THIS_MODULE, - .open = vol_cdev_open, - .release = vol_cdev_release, - .llseek = vol_cdev_llseek, - .read = vol_cdev_read, - .write = vol_cdev_write, - .ioctl = vol_cdev_ioctl, +/* UBI control character device operations */ +const struct file_operations ubi_ctrl_cdev_operations = { + .owner = THIS_MODULE, + .unlocked_ioctl = ctrl_cdev_ioctl, + .compat_ioctl = ctrl_cdev_compat_ioctl, }; -- cgit v1.2.1 From 3013ee31b6c5fd9a49a81816d6c13e1cdb7a1288 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Fri, 16 Jan 2009 19:08:43 +0200 Subject: UBI: use nicer 64-bit math Get rid of 'do_div()' and use more user-friendly primitives from 'linux/math64.h'. Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/cdev.c | 20 +++++--------------- drivers/mtd/ubi/gluebi.c | 11 +++-------- drivers/mtd/ubi/scan.c | 8 +++----- drivers/mtd/ubi/upd.c | 21 +++++++-------------- drivers/mtd/ubi/vmt.c | 17 +++++++---------- 5 files changed, 25 insertions(+), 52 deletions(-) diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index 0a2d835fec80..f9631eb3fef3 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -41,8 +41,8 @@ #include #include #include +#include #include -#include #include "ubi.h" /** @@ -195,7 +195,6 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count, int err, lnum, off, len, tbuf_size; size_t count_save = count; void *tbuf; - uint64_t tmp; dbg_gen("read %zd bytes from offset %lld of volume %d", count, *offp, vol->vol_id); @@ -225,10 +224,7 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count, return -ENOMEM; len = count > tbuf_size ? tbuf_size : count; - - tmp = *offp; - off = do_div(tmp, vol->usable_leb_size); - lnum = tmp; + lnum = div_u64_rem(*offp, vol->usable_leb_size, &off); do { cond_resched(); @@ -279,7 +275,6 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf, int lnum, off, len, tbuf_size, err = 0; size_t count_save = count; char *tbuf; - uint64_t tmp; dbg_gen("requested: write %zd bytes to offset %lld of volume %u", count, *offp, vol->vol_id); @@ -287,10 +282,7 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf, if (vol->vol_type == UBI_STATIC_VOLUME) return -EROFS; - tmp = *offp; - off = do_div(tmp, vol->usable_leb_size); - lnum = tmp; - + lnum = div_u64_rem(*offp, vol->usable_leb_size, &off); if (off & (ubi->min_io_size - 1)) { dbg_err("unaligned position"); return -EINVAL; @@ -882,7 +874,6 @@ static long ubi_cdev_ioctl(struct file *file, unsigned int cmd, case UBI_IOCRSVOL: { int pebs; - uint64_t tmp; struct ubi_rsvol_req req; dbg_gen("re-size volume"); @@ -902,9 +893,8 @@ static long ubi_cdev_ioctl(struct file *file, unsigned int cmd, break; } - tmp = req.bytes; - pebs = !!do_div(tmp, desc->vol->usable_leb_size); - pebs += tmp; + pebs = div_u64(req.bytes + desc->vol->usable_leb_size - 1, + desc->vol->usable_leb_size); mutex_lock(&ubi->volumes_mutex); err = ubi_resize_volume(desc, pebs); diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c index 6dd4f5e77f82..49cd55ade9c8 100644 --- a/drivers/mtd/ubi/gluebi.c +++ b/drivers/mtd/ubi/gluebi.c @@ -28,7 +28,7 @@ * eraseblock size is equivalent to the logical eraseblock size of the volume. */ -#include +#include #include "ubi.h" /** @@ -109,7 +109,6 @@ static int gluebi_read(struct mtd_info *mtd, loff_t from, size_t len, int err = 0, lnum, offs, total_read; struct ubi_volume *vol; struct ubi_device *ubi; - uint64_t tmp = from; dbg_gen("read %zd bytes from offset %lld", len, from); @@ -119,9 +118,7 @@ static int gluebi_read(struct mtd_info *mtd, loff_t from, size_t len, vol = container_of(mtd, struct ubi_volume, gluebi_mtd); ubi = vol->ubi; - offs = do_div(tmp, mtd->erasesize); - lnum = tmp; - + lnum = div_u64_rem(from, mtd->erasesize, &offs); total_read = len; while (total_read) { size_t to_read = mtd->erasesize - offs; @@ -160,7 +157,6 @@ static int gluebi_write(struct mtd_info *mtd, loff_t to, size_t len, int err = 0, lnum, offs, total_written; struct ubi_volume *vol; struct ubi_device *ubi; - uint64_t tmp = to; dbg_gen("write %zd bytes to offset %lld", len, to); @@ -173,8 +169,7 @@ static int gluebi_write(struct mtd_info *mtd, loff_t to, size_t len, if (ubi->ro_mode) return -EROFS; - offs = do_div(tmp, mtd->erasesize); - lnum = tmp; + lnum = div_u64_rem(to, mtd->erasesize, &offs); if (len % mtd->writesize || offs % mtd->writesize) return -EINVAL; diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c index ecde202a5a12..c3d653ba5ca0 100644 --- a/drivers/mtd/ubi/scan.c +++ b/drivers/mtd/ubi/scan.c @@ -42,7 +42,7 @@ #include #include -#include +#include #include "ubi.h" #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID @@ -904,10 +904,8 @@ struct ubi_scan_info *ubi_scan(struct ubi_device *ubi) dbg_msg("scanning is finished"); /* Calculate mean erase counter */ - if (si->ec_count) { - do_div(si->ec_sum, si->ec_count); - si->mean_ec = si->ec_sum; - } + if (si->ec_count) + si->mean_ec = div_u64(si->ec_sum, si->ec_count); if (si->is_empty) ubi_msg("empty MTD device detected"); diff --git a/drivers/mtd/ubi/upd.c b/drivers/mtd/ubi/upd.c index 8b89cc18ff0b..6b4d1ae891ae 100644 --- a/drivers/mtd/ubi/upd.c +++ b/drivers/mtd/ubi/upd.c @@ -40,7 +40,7 @@ #include #include -#include +#include #include "ubi.h" /** @@ -89,7 +89,6 @@ static int clear_update_marker(struct ubi_device *ubi, struct ubi_volume *vol, long long bytes) { int err; - uint64_t tmp; struct ubi_vtbl_record vtbl_rec; dbg_gen("clear update marker for volume %d", vol->vol_id); @@ -101,9 +100,9 @@ static int clear_update_marker(struct ubi_device *ubi, struct ubi_volume *vol, if (vol->vol_type == UBI_STATIC_VOLUME) { vol->corrupted = 0; - vol->used_bytes = tmp = bytes; - vol->last_eb_bytes = do_div(tmp, vol->usable_leb_size); - vol->used_ebs = tmp; + vol->used_bytes = bytes; + vol->used_ebs = div_u64_rem(bytes, vol->usable_leb_size, + &vol->last_eb_bytes); if (vol->last_eb_bytes) vol->used_ebs += 1; else @@ -131,7 +130,6 @@ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol, long long bytes) { int i, err; - uint64_t tmp; dbg_gen("start update of volume %d, %llu bytes", vol->vol_id, bytes); ubi_assert(!vol->updating && !vol->changing_leb); @@ -161,9 +159,8 @@ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol, if (!vol->upd_buf) return -ENOMEM; - tmp = bytes; - vol->upd_ebs = !!do_div(tmp, vol->usable_leb_size); - vol->upd_ebs += tmp; + vol->upd_ebs = div_u64(bytes + vol->usable_leb_size - 1, + vol->usable_leb_size); vol->upd_bytes = bytes; vol->upd_received = 0; return 0; @@ -282,7 +279,6 @@ static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum, int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol, const void __user *buf, int count) { - uint64_t tmp; int lnum, offs, err = 0, len, to_write = count; dbg_gen("write %d of %lld bytes, %lld already passed", @@ -291,10 +287,7 @@ int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol, if (ubi->ro_mode) return -EROFS; - tmp = vol->upd_received; - offs = do_div(tmp, vol->usable_leb_size); - lnum = tmp; - + lnum = div_u64_rem(vol->upd_received, vol->usable_leb_size, &offs); if (vol->upd_received + count > vol->upd_bytes) to_write = count = vol->upd_bytes - vol->upd_received; diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c index 22e1d7398fce..df5483562b7a 100644 --- a/drivers/mtd/ubi/vmt.c +++ b/drivers/mtd/ubi/vmt.c @@ -24,7 +24,7 @@ */ #include -#include +#include #include "ubi.h" #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID @@ -205,7 +205,6 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req) int i, err, vol_id = req->vol_id, do_free = 1; struct ubi_volume *vol; struct ubi_vtbl_record vtbl_rec; - uint64_t bytes; dev_t dev; if (ubi->ro_mode) @@ -255,10 +254,8 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req) /* Calculate how many eraseblocks are requested */ vol->usable_leb_size = ubi->leb_size - ubi->leb_size % req->alignment; - bytes = req->bytes; - if (do_div(bytes, vol->usable_leb_size)) - vol->reserved_pebs = 1; - vol->reserved_pebs += bytes; + vol->reserved_pebs += div_u64(req->bytes + vol->usable_leb_size - 1, + vol->usable_leb_size); /* Reserve physical eraseblocks */ if (vol->reserved_pebs > ubi->avail_pebs) { @@ -301,10 +298,10 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req) vol->used_bytes = (long long)vol->used_ebs * vol->usable_leb_size; } else { - bytes = vol->used_bytes; - vol->last_eb_bytes = do_div(bytes, vol->usable_leb_size); - vol->used_ebs = bytes; - if (vol->last_eb_bytes) + vol->used_ebs = div_u64_rem(vol->used_bytes, + vol->usable_leb_size, + &vol->last_eb_bytes); + if (vol->last_eb_bytes != 0) vol->used_ebs += 1; else vol->last_eb_bytes = vol->usable_leb_size; -- cgit v1.2.1 From f90d4118bacef87894621a3e8aba853fa0c89abc Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Fri, 16 Jan 2009 10:24:10 +0800 Subject: cpuset: fix possible deadlock in async_rebuild_sched_domains Lockdep reported some possible circular locking info when we tested cpuset on NUMA/fake NUMA box. ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.29-rc1-00224-ga652504 #111 ------------------------------------------------------- bash/2968 is trying to acquire lock: (events){--..}, at: [] flush_work+0x24/0xd8 but task is already holding lock: (cgroup_mutex){--..}, at: [] cgroup_lock_live_group+0x12/0x29 which lock already depends on the new lock. ...... ------------------------------------------------------- Steps to reproduce: # mkdir /dev/cpuset # mount -t cpuset xxx /dev/cpuset # mkdir /dev/cpuset/0 # echo 0 > /dev/cpuset/0/cpus # echo 0 > /dev/cpuset/0/mems # echo 1 > /dev/cpuset/0/memory_migrate # cat /dev/zero > /dev/null & # echo $! > /dev/cpuset/0/tasks This is because async_rebuild_sched_domains has the following lock sequence: run_workqueue(async_rebuild_sched_domains) -> do_rebuild_sched_domains -> cgroup_lock But, attaching tasks when memory_migrate is set has following: cgroup_lock_live_group(cgroup_tasks_write) -> do_migrate_pages -> flush_work This patch fixes it by using a separate workqueue thread. Signed-off-by: Miao Xie Signed-off-by: Lai Jiangshan Signed-off-by: Ingo Molnar --- kernel/cpuset.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/kernel/cpuset.c b/kernel/cpuset.c index a85678865c5e..f76db9dcaa05 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -60,6 +60,14 @@ #include #include +/* + * Workqueue for cpuset related tasks. + * + * Using kevent workqueue may cause deadlock when memory_migrate + * is set. So we create a separate workqueue thread for cpuset. + */ +static struct workqueue_struct *cpuset_wq; + /* * Tracks how many cpusets are currently defined in system. * When there is only one cpuset (the root cpuset) we can @@ -831,7 +839,7 @@ static DECLARE_WORK(rebuild_sched_domains_work, do_rebuild_sched_domains); */ static void async_rebuild_sched_domains(void) { - schedule_work(&rebuild_sched_domains_work); + queue_work(cpuset_wq, &rebuild_sched_domains_work); } /* @@ -2111,6 +2119,9 @@ void __init cpuset_init_smp(void) hotcpu_notifier(cpuset_track_online_cpus, 0); hotplug_memory_notifier(cpuset_track_online_nodes, 10); + + cpuset_wq = create_singlethread_workqueue("cpuset"); + BUG_ON(!cpuset_wq); } /** -- cgit v1.2.1 From 082605de5f82eb692cc90f7fda071cc01bb5ac34 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 19 Jan 2009 14:32:51 -0500 Subject: ring-buffer: fix alignment problem Impact: fix to allow some archs to use the ring buffer Commits in the ring buffer are checked by pointer arithmetic. If the calculation is incorrect, then the commits will never take place and the buffer will simply fill up and report an error. Each page in the ring buffer has a small header: struct buffer_data_page { u64 time_stamp; local_t commit; unsigned char data[]; }; Unfortuntely, some of the calculations used sizeof(struct buffer_data_page) to know the size of the header. But this is incorrect on some archs, where sizeof(struct buffer_data_page) does not equal offsetof(struct buffer_data_page, data), and on those archs, the commits are never processed. This patch replaces the sizeof with offsetof. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- kernel/trace/ring_buffer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 8b0daf0662ef..1d6526361d06 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -246,7 +246,7 @@ static inline int test_time_stamp(u64 delta) return 0; } -#define BUF_PAGE_SIZE (PAGE_SIZE - sizeof(struct buffer_data_page)) +#define BUF_PAGE_SIZE (PAGE_SIZE - offsetof(struct buffer_data_page, data)) /* * head_page == tail_page && head == tail then buffer is empty. -- cgit v1.2.1 From e7f07968c16bdd9480001c0a9de013ba56889cf9 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Tue, 20 Jan 2009 09:50:19 -0500 Subject: ext4: Fix ext4_free_blocks() w/o a journal when files have indirect blocks When trying to unlink a file with indirect blocks on a filesystem without a journal, the "circular indirect block" sanity test was getting falsely triggered. Signed-off-by: "Theodore Ts'o" --- fs/ext4/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 49484ba801c9..b4386dafeb0c 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -3622,7 +3622,7 @@ static void ext4_free_data(handle_t *handle, struct inode *inode, * block pointed to itself, it would have been detached when * the block was cleared. Check for this instead of OOPSing. */ - if (bh2jh(this_bh)) + if ((EXT4_JOURNAL(inode) == NULL) || bh2jh(this_bh)) ext4_handle_dirty_metadata(handle, inode, this_bh); else ext4_error(inode->i_sb, __func__, -- cgit v1.2.1 From 8c4c19f1367435afdc16ac122a2a95a4d6cff9f0 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Tue, 20 Jan 2009 17:48:02 +0200 Subject: UBI: remove unused variable Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/build.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 9082768cc6c3..09a326ecd05b 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -380,7 +380,7 @@ static void free_user_volumes(struct ubi_device *ubi) */ static int uif_init(struct ubi_device *ubi) { - int i, err, do_free = 0; + int i, err; dev_t dev; sprintf(ubi->ubi_name, UBI_NAME_STR "%d", ubi->ubi_num); @@ -427,13 +427,10 @@ static int uif_init(struct ubi_device *ubi) out_volumes: kill_volumes(ubi); - do_free = 0; out_sysfs: ubi_sysfs_close(ubi); cdev_del(&ubi->cdev); out_unreg: - if (do_free) - free_user_volumes(ubi); unregister_chrdev_region(ubi->cdev.dev, ubi->vtbl_slots + 1); ubi_err("cannot initialize UBI %s, error %d", ubi->ubi_name, err); return err; -- cgit v1.2.1 From 36b477d005fbda29e7581c3cef7ee31a59d8970b Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Tue, 20 Jan 2009 18:04:09 +0200 Subject: UBI: fix resource de-allocation GregKH asked to fix UBI which has fake device release method. Indeed, we have to free UBI device description object from the release method, because otherwise we'll oops is someone opens a UBI device sysfs file, then the device is removed, and he reads the file. With this fix, he will get -ENODEV instead of an oops. Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/build.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 09a326ecd05b..4048db83aef6 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -263,8 +263,12 @@ static ssize_t dev_attribute_show(struct device *dev, return ret; } -/* Fake "release" method for UBI devices */ -static void dev_release(struct device *dev) { } +static void dev_release(struct device *dev) +{ + struct ubi_device *ubi = container_of(dev, struct ubi_device, dev); + + kfree(ubi); +} /** * ubi_sysfs_init - initialize sysfs for an UBI device. @@ -944,6 +948,12 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway) if (ubi->bgt_thread) kthread_stop(ubi->bgt_thread); + /* + * Get a reference to the device in order to prevent 'dev_release()' + * from freeing @ubi object. + */ + get_device(&ubi->dev); + uif_close(ubi); ubi_wl_close(ubi); free_internal_volumes(ubi); @@ -955,7 +965,7 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway) vfree(ubi->dbg_peb_buf); #endif ubi_msg("mtd%d is detached from ubi%d", ubi->mtd->index, ubi->ubi_num); - kfree(ubi); + put_device(&ubi->dev); return 0; } -- cgit v1.2.1 From a5c7f4710fba334bf613d705f97b4471b36446f8 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Wed, 19 Mar 2008 22:02:40 +0100 Subject: firewire: insist on successive self ID complete events The whole topology code only works if the old and new topologies which are compared come from immediately successive self ID complete events. If there happened bus resets without self ID complete events in the meantime, or self ID complete events with invalid selfIDs, the topology comparison could identify nodes wrongly, or more likely just corrupt kernel memory or panic right away. We now discard all nodes of the old topology and treat all current nodes as new ones if the current self ID generation is not the previous one plus 1. Signed-off-by: Stefan Richter Signed-off-by: Jarod Wilson --- drivers/firewire/fw-topology.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/fw-topology.c index c9be6e6948c4..e7520e4bd6bc 100644 --- a/drivers/firewire/fw-topology.c +++ b/drivers/firewire/fw-topology.c @@ -518,6 +518,18 @@ fw_core_handle_bus_reset(struct fw_card *card, struct fw_node *local_node; unsigned long flags; + /* + * If the selfID buffer is not the immediate successor of the + * previously processed one, we cannot reliably compare the + * old and new topologies. + */ + if ((generation & 0xff) != ((card->generation + 1) & 0xff) && + card->local_node != NULL) { + fw_notify("skipped bus generations, destroying all nodes\n"); + fw_destroy_nodes(card); + card->bm_retries = 0; + } + spin_lock_irqsave(&card->lock, flags); card->node_id = node_id; -- cgit v1.2.1 From 8cd0bbbdff7471163cc6a058be8b8610ddd01d6b Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Mon, 24 Mar 2008 20:56:40 +0100 Subject: firewire: unnecessary BM delay after generation rollover Noticed by Jarod Wilson: The bus manager work was unnecessarily delayed each time the bus generation counter rolled over. Signed-off-by: Stefan Richter Signed-off-by: Jarod Wilson --- drivers/firewire/fw-card.c | 2 +- drivers/firewire/fw-topology.c | 2 +- drivers/firewire/fw-transaction.h | 9 +++++++++ 3 files changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/firewire/fw-card.c b/drivers/firewire/fw-card.c index 6bd91a15d5e6..17a80cecdc14 100644 --- a/drivers/firewire/fw-card.c +++ b/drivers/firewire/fw-card.c @@ -232,7 +232,7 @@ fw_card_bm_work(struct work_struct *work) root_id = root_node->node_id; grace = time_after(jiffies, card->reset_jiffies + DIV_ROUND_UP(HZ, 10)); - if (card->bm_generation + 1 == generation || + if (is_next_generation(generation, card->bm_generation) || (card->bm_generation != generation && grace)) { /* * This first step is to figure out who is IRM and diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/fw-topology.c index e7520e4bd6bc..8dd6703b55cd 100644 --- a/drivers/firewire/fw-topology.c +++ b/drivers/firewire/fw-topology.c @@ -523,7 +523,7 @@ fw_core_handle_bus_reset(struct fw_card *card, * previously processed one, we cannot reliably compare the * old and new topologies. */ - if ((generation & 0xff) != ((card->generation + 1) & 0xff) && + if (!is_next_generation(generation, card->generation) && card->local_node != NULL) { fw_notify("skipped bus generations, destroying all nodes\n"); fw_destroy_nodes(card); diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h index c9ab12a15f6e..1d78e9cc5940 100644 --- a/drivers/firewire/fw-transaction.h +++ b/drivers/firewire/fw-transaction.h @@ -275,6 +275,15 @@ static inline void fw_card_put(struct fw_card *card) extern void fw_schedule_bm_work(struct fw_card *card, unsigned long delay); +/* + * Check whether new_generation is the immediate successor of old_generation. + * Take counter roll-over at 255 (as per to OHCI) into account. + */ +static inline bool is_next_generation(int new_generation, int old_generation) +{ + return (new_generation & 0xff) == ((old_generation + 1) & 0xff); +} + /* * The iso packet format allows for an immediate header/payload part * stored in 'header' immediately after the packet info plus an -- cgit v1.2.1 From 3d36a0df3b473fb53531484df227f2da8bc7494b Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 17 Jan 2009 22:45:54 +0100 Subject: firewire: keep highlevel drivers attached during brief connection loss There are situations when nodes vanish from the bus and come back quickly thereafter: - When certain bus-powered hubs are plugged in, - when certain devices are plugged into 6-port hubs, - when certain disk enclosures are switched from self-power to bus power or vice versa and break the daisy chain during the transition, - when the user plugs a cable out and quickly plugs it back in, e.g. to reorder a daisy chain (works on Mac OS X if done quickly enough), - when certain hubs temporarily malfunction during high bus traffic. Until now, firewire-core reported affected nodes as lost to the highlevel drivers (firewire-sbp2 and userspace drivers). We now delay the destruction of device representations until after at least two seconds after the last bus reset. If a "new" device is detected in this period whose bus information block and root directory header match that of a device which is pending for deletion, we resurrect that device and send update calls to highlevel drivers. Signed-off-by: Stefan Richter --- drivers/firewire/fw-device.c | 121 +++++++++++++++++++++++++++++++++++-------- drivers/firewire/fw-device.h | 1 + 2 files changed, 100 insertions(+), 22 deletions(-) diff --git a/drivers/firewire/fw-device.c b/drivers/firewire/fw-device.c index 2af5a8d1e012..0925d91b2610 100644 --- a/drivers/firewire/fw-device.c +++ b/drivers/firewire/fw-device.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -634,12 +635,38 @@ struct fw_device *fw_device_get_by_devt(dev_t devt) return device; } +/* + * These defines control the retry behavior for reading the config + * rom. It shouldn't be necessary to tweak these; if the device + * doesn't respond to a config rom read within 10 seconds, it's not + * going to respond at all. As for the initial delay, a lot of + * devices will be able to respond within half a second after bus + * reset. On the other hand, it's not really worth being more + * aggressive than that, since it scales pretty well; if 10 devices + * are plugged in, they're all getting read within one second. + */ + +#define MAX_RETRIES 10 +#define RETRY_DELAY (3 * HZ) +#define INITIAL_DELAY (HZ / 2) +#define SHUTDOWN_DELAY (2 * HZ) + static void fw_device_shutdown(struct work_struct *work) { struct fw_device *device = container_of(work, struct fw_device, work.work); int minor = MINOR(device->device.devt); + if (time_is_after_jiffies(device->card->reset_jiffies + SHUTDOWN_DELAY)) { + schedule_delayed_work(&device->work, SHUTDOWN_DELAY); + return; + } + + if (atomic_cmpxchg(&device->state, + FW_DEVICE_GONE, + FW_DEVICE_SHUTDOWN) != FW_DEVICE_GONE) + return; + fw_device_cdev_remove(device); device_for_each_child(&device->device, NULL, shutdown_unit); device_unregister(&device->device); @@ -647,6 +674,7 @@ static void fw_device_shutdown(struct work_struct *work) down_write(&fw_device_rwsem); idr_remove(&fw_device_idr, minor); up_write(&fw_device_rwsem); + fw_device_put(device); } @@ -654,25 +682,63 @@ static struct device_type fw_device_type = { .release = fw_device_release, }; +static void fw_device_update(struct work_struct *work); + /* - * These defines control the retry behavior for reading the config - * rom. It shouldn't be necessary to tweak these; if the device - * doesn't respond to a config rom read within 10 seconds, it's not - * going to respond at all. As for the initial delay, a lot of - * devices will be able to respond within half a second after bus - * reset. On the other hand, it's not really worth being more - * aggressive than that, since it scales pretty well; if 10 devices - * are plugged in, they're all getting read within one second. + * If a device was pending for deletion because its node went away but its + * bus info block and root directory header matches that of a newly discovered + * device, revive the existing fw_device. + * The newly allocated fw_device becomes obsolete instead. */ +static int lookup_existing_device(struct device *dev, void *data) +{ + struct fw_device *old = fw_device(dev); + struct fw_device *new = data; + struct fw_card *card = new->card; + int match = 0; + + down_read(&fw_device_rwsem); /* serialize config_rom access */ + spin_lock_irq(&card->lock); /* serialize node access */ + + if (memcmp(old->config_rom, new->config_rom, 6 * 4) == 0 && + atomic_cmpxchg(&old->state, + FW_DEVICE_GONE, + FW_DEVICE_RUNNING) == FW_DEVICE_GONE) { + struct fw_node *current_node = new->node; + struct fw_node *obsolete_node = old->node; + + new->node = obsolete_node; + new->node->data = new; + old->node = current_node; + old->node->data = old; + + old->max_speed = new->max_speed; + old->node_id = current_node->node_id; + smp_wmb(); /* update node_id before generation */ + old->generation = card->generation; + old->config_rom_retries = 0; + fw_notify("rediscovered device %s\n", dev_name(dev)); -#define MAX_RETRIES 10 -#define RETRY_DELAY (3 * HZ) -#define INITIAL_DELAY (HZ / 2) + PREPARE_DELAYED_WORK(&old->work, fw_device_update); + schedule_delayed_work(&old->work, 0); + + if (current_node == card->root_node) + fw_schedule_bm_work(card, 0); + + match = 1; + } + + spin_unlock_irq(&card->lock); + up_read(&fw_device_rwsem); + + return match; +} static void fw_device_init(struct work_struct *work) { struct fw_device *device = container_of(work, struct fw_device, work.work); + struct device *revived_dev; int minor, err; /* @@ -696,6 +762,15 @@ static void fw_device_init(struct work_struct *work) return; } + revived_dev = device_find_child(device->card->device, + device, lookup_existing_device); + if (revived_dev) { + put_device(revived_dev); + fw_device_release(&device->device); + + return; + } + device_initialize(&device->device); fw_device_get(device); @@ -734,9 +809,10 @@ static void fw_device_init(struct work_struct *work) * fw_node_event(). */ if (atomic_cmpxchg(&device->state, - FW_DEVICE_INITIALIZING, - FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) { - fw_device_shutdown(work); + FW_DEVICE_INITIALIZING, + FW_DEVICE_RUNNING) == FW_DEVICE_GONE) { + PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown); + schedule_delayed_work(&device->work, SHUTDOWN_DELAY); } else { if (device->config_rom_retries) fw_notify("created device %s: GUID %08x%08x, S%d00, " @@ -847,8 +923,8 @@ static void fw_device_refresh(struct work_struct *work) case REREAD_BIB_UNCHANGED: if (atomic_cmpxchg(&device->state, - FW_DEVICE_INITIALIZING, - FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) + FW_DEVICE_INITIALIZING, + FW_DEVICE_RUNNING) == FW_DEVICE_GONE) goto gone; fw_device_update(work); @@ -879,8 +955,8 @@ static void fw_device_refresh(struct work_struct *work) create_units(device); if (atomic_cmpxchg(&device->state, - FW_DEVICE_INITIALIZING, - FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) + FW_DEVICE_INITIALIZING, + FW_DEVICE_RUNNING) == FW_DEVICE_GONE) goto gone; fw_notify("refreshed device %s\n", dev_name(&device->device)); @@ -890,8 +966,9 @@ static void fw_device_refresh(struct work_struct *work) give_up: fw_notify("giving up on refresh of device %s\n", dev_name(&device->device)); gone: - atomic_set(&device->state, FW_DEVICE_SHUTDOWN); - fw_device_shutdown(work); + atomic_set(&device->state, FW_DEVICE_GONE); + PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown); + schedule_delayed_work(&device->work, SHUTDOWN_DELAY); out: if (node_id == card->root_node->node_id) fw_schedule_bm_work(card, 0); @@ -995,9 +1072,9 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event) */ device = node->data; if (atomic_xchg(&device->state, - FW_DEVICE_SHUTDOWN) == FW_DEVICE_RUNNING) { + FW_DEVICE_GONE) == FW_DEVICE_RUNNING) { PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown); - schedule_delayed_work(&device->work, 0); + schedule_delayed_work(&device->work, SHUTDOWN_DELAY); } break; } diff --git a/drivers/firewire/fw-device.h b/drivers/firewire/fw-device.h index df51732608d9..8ef6ec2ca21c 100644 --- a/drivers/firewire/fw-device.h +++ b/drivers/firewire/fw-device.h @@ -28,6 +28,7 @@ enum fw_device_state { FW_DEVICE_INITIALIZING, FW_DEVICE_RUNNING, + FW_DEVICE_GONE, FW_DEVICE_SHUTDOWN, }; -- cgit v1.2.1 From 00f57f545afa422db3003b0d0b30a30f8de7ecb2 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Wed, 14 Jan 2009 13:33:27 -0800 Subject: tracing/function-graph-tracer: fix a regression while suspend to disk Impact: fix a crash while kernel image restore When the function graph tracer is running and while suspend to disk, some racy and dangerous things happen against this tracer. The current task will save its registers including the stack pointer which contains the return address hooked by the tracer. But the current task will continue to enter other functions after that to save the memory, and then it will store other return addresses, and finally loose the old depth which matches the return address saved in the old stack (during the registers saving). So on image restore, the code will return to wrong addresses. And there are other things: on restore, the task will have it's "current" pointer overwritten during registers restoring....switching from one task to another... That would be insane to try to trace function graphs at these stages. This patch makes the function graph tracer listening on power events, making it's tracing disabled for the current task (the one that performs the hibernation work) while suspend/resume to disk, making the tracing safe during hibernation. Signed-off-by: Frederic Weisbecker Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- kernel/trace/ftrace.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 2f32969c09df..7dcf6e9f2b04 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -1965,6 +1966,7 @@ ftrace_enable_sysctl(struct ctl_table *table, int write, #ifdef CONFIG_FUNCTION_GRAPH_TRACER static atomic_t ftrace_graph_active; +static struct notifier_block ftrace_suspend_notifier; int ftrace_graph_entry_stub(struct ftrace_graph_ent *trace) { @@ -2043,6 +2045,27 @@ static int start_graph_tracing(void) return ret; } +/* + * Hibernation protection. + * The state of the current task is too much unstable during + * suspend/restore to disk. We want to protect against that. + */ +static int +ftrace_suspend_notifier_call(struct notifier_block *bl, unsigned long state, + void *unused) +{ + switch (state) { + case PM_HIBERNATION_PREPARE: + pause_graph_tracing(); + break; + + case PM_POST_HIBERNATION: + unpause_graph_tracing(); + break; + } + return NOTIFY_DONE; +} + int register_ftrace_graph(trace_func_graph_ret_t retfunc, trace_func_graph_ent_t entryfunc) { @@ -2050,6 +2073,9 @@ int register_ftrace_graph(trace_func_graph_ret_t retfunc, mutex_lock(&ftrace_sysctl_lock); + ftrace_suspend_notifier.notifier_call = ftrace_suspend_notifier_call; + register_pm_notifier(&ftrace_suspend_notifier); + atomic_inc(&ftrace_graph_active); ret = start_graph_tracing(); if (ret) { @@ -2075,6 +2101,7 @@ void unregister_ftrace_graph(void) ftrace_graph_return = (trace_func_graph_ret_t)ftrace_stub; ftrace_graph_entry = ftrace_graph_entry_stub; ftrace_shutdown(FTRACE_STOP_FUNC_RET); + unregister_pm_notifier(&ftrace_suspend_notifier); mutex_unlock(&ftrace_sysctl_lock); } -- cgit v1.2.1 From 551b4048b3d4acf15aff9fe4aed89b892c135b02 Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Mon, 12 Jan 2009 11:06:18 +0800 Subject: ring_buffer: reset write when reserve buffer fail Impact: reset struct buffer_page.write when interrupt storm if struct buffer_page.write is not reset, any succedent committing will corrupted ring_buffer: static inline void rb_set_commit_to_write(struct ring_buffer_per_cpu *cpu_buffer) { ...... cpu_buffer->commit_page->commit = cpu_buffer->commit_page->write; ...... } when "if (RB_WARN_ON(cpu_buffer, next_page == reader_page))", ring_buffer is disabled, but some reserved buffers may haven't been committed. we need reset struct buffer_page.write. when "if (unlikely(next_page == cpu_buffer->commit_page))", ring_buffer is still available, we should not corrupt it. Signed-off-by: Lai Jiangshan Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- kernel/trace/ring_buffer.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 1d6526361d06..9c1e73da4e30 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -1025,12 +1025,8 @@ __rb_reserve_next(struct ring_buffer_per_cpu *cpu_buffer, } if (next_page == head_page) { - if (!(buffer->flags & RB_FL_OVERWRITE)) { - /* reset write */ - if (tail <= BUF_PAGE_SIZE) - local_set(&tail_page->write, tail); + if (!(buffer->flags & RB_FL_OVERWRITE)) goto out_unlock; - } /* tail_page has not moved yet? */ if (tail_page == cpu_buffer->tail_page) { @@ -1105,6 +1101,10 @@ __rb_reserve_next(struct ring_buffer_per_cpu *cpu_buffer, return event; out_unlock: + /* reset write */ + if (tail <= BUF_PAGE_SIZE) + local_set(&tail_page->write, tail); + __raw_spin_unlock(&cpu_buffer->lock); local_irq_restore(flags); return NULL; -- cgit v1.2.1 From faf6861ebd776871e77b761c43ec045cd20b5716 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 14 Jan 2009 12:24:42 -0500 Subject: trace: print ftrace_dump at KERN_EMERG log level Impact: fix to print out ftrace_dump when expected I was debugging a hard race condition to only find out that after I hit the race, my log level was not at level to show KERN_INFO. The time it took to trigger the race was wasted because I did not capture the trace. Since ftrace_dump is only called from kernel oops (and only when it is set in the kernel command line to do so), or when a developer adds it to their own local tree, the log level of the print should be at KERN_EMERG to make sure the print appears. ftrace_dump is not called by a normal user setup, and will not add extra unwanted print out to the console. There is no reason it should be at KERN_INFO. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- kernel/trace/trace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index c580233add95..1a1c5a6ab24e 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -3736,7 +3736,7 @@ static struct notifier_block trace_die_notifier = { * it if we decide to change what log level the ftrace dump * should be at. */ -#define KERN_TRACE KERN_INFO +#define KERN_TRACE KERN_EMERG static void trace_printk_seq(struct trace_seq *s) -- cgit v1.2.1 From a442e5e0a2011af5b2d1f118fee0a8f9079f1d88 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 14 Jan 2009 14:50:19 -0500 Subject: trace: stop all recording to ring buffer on ftrace_dump Impact: limit ftrace dump output Currently ftrace_dump only calls ftrace_kill that is a fast way to prevent the function tracer functions from being called (just sets a flag and clears the function to call, nothing else). It is better to also turn off any recording to the ring buffers as well. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- kernel/trace/trace.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 1a1c5a6ab24e..4d89e84f0f4b 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -3770,6 +3770,7 @@ void ftrace_dump(void) dump_ran = 1; /* No turning back! */ + tracing_off(); ftrace_kill(); for_each_tracing_cpu(cpu) { -- cgit v1.2.1 From 1092307d582a7566d23779c304cf86f3075ac5f0 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 15 Jan 2009 23:40:11 -0500 Subject: trace: set max latency variable to zero on default Impact: trace max latencies on start of latency tracing This patch sets the max latency to zero whenever one of the irq variant tracers or the wakeup tracer is set to current tracer. Most developers expect to see output when starting up a latency tracer. But since the max_latency is already set to max, and it takes a latency greater than max_latency to be recorded, there is no trace. This is not the expected behavior and has even confused myself. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- kernel/trace/trace.c | 2 +- kernel/trace/trace_irqsoff.c | 1 + kernel/trace/trace_sched_wakeup.c | 1 + 3 files changed, 3 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 4d89e84f0f4b..17bb88d86ac2 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -40,7 +40,7 @@ #define TRACE_BUFFER_FLAGS (RB_FL_OVERWRITE) -unsigned long __read_mostly tracing_max_latency = (cycle_t)ULONG_MAX; +unsigned long __read_mostly tracing_max_latency; unsigned long __read_mostly tracing_thresh; /* diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c index 7c2e326bbc8b..62a78d943534 100644 --- a/kernel/trace/trace_irqsoff.c +++ b/kernel/trace/trace_irqsoff.c @@ -380,6 +380,7 @@ static void stop_irqsoff_tracer(struct trace_array *tr) static void __irqsoff_tracer_init(struct trace_array *tr) { + tracing_max_latency = 0; irqsoff_trace = tr; /* make sure that the tracer is visible */ smp_wmb(); diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c index 43586b689e31..42ae1e77b6b3 100644 --- a/kernel/trace/trace_sched_wakeup.c +++ b/kernel/trace/trace_sched_wakeup.c @@ -333,6 +333,7 @@ static void stop_wakeup_tracer(struct trace_array *tr) static int wakeup_tracer_init(struct trace_array *tr) { + tracing_max_latency = 0; wakeup_trace = tr; start_wakeup_tracer(tr); return 0; -- cgit v1.2.1 From 91a8d07d82cac3aae3ef2ea1aaba5c9c4a934e91 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 21 Jan 2009 18:45:57 -0500 Subject: ring-buffer: reset timestamps when ring buffer is reset Impact: fix bad times of recent resets The ring buffer needs to reset its timestamps when reseting of the buffer, otherwise the timestamps are stale and might be used to calculate times in the buffer causing funny timestamps to appear. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- kernel/trace/ring_buffer.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 9c1e73da4e30..bd38c5cfd8ad 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -2174,6 +2174,9 @@ rb_reset_cpu(struct ring_buffer_per_cpu *cpu_buffer) cpu_buffer->overrun = 0; cpu_buffer->entries = 0; + + cpu_buffer->write_stamp = 0; + cpu_buffer->read_stamp = 0; } /** -- cgit v1.2.1 From ba2607fe9c1f2d4ad5a3d4c4ae9117c5bfdca826 Mon Sep 17 00:00:00 2001 From: Markus Metzger Date: Mon, 19 Jan 2009 10:38:35 +0100 Subject: x86, ds, bts: cleanup/fix DS configuration Cleanup the cpuid check for DS configuration. This also fixes a Corei7 CPUID enumeration bug. Signed-off-by: Markus Metzger Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- arch/x86/kernel/ds.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-) diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c index da91701a2348..169a120587be 100644 --- a/arch/x86/kernel/ds.c +++ b/arch/x86/kernel/ds.c @@ -15,8 +15,8 @@ * - buffer allocation (memory accounting) * * - * Copyright (C) 2007-2008 Intel Corporation. - * Markus Metzger , 2007-2008 + * Copyright (C) 2007-2009 Intel Corporation. + * Markus Metzger , 2007-2009 */ @@ -890,7 +890,7 @@ int ds_set_pebs_reset(struct pebs_tracer *tracer, u64 value) } static const struct ds_configuration ds_cfg_netburst = { - .name = "netburst", + .name = "Netburst", .ctl[dsf_bts] = (1 << 2) | (1 << 3), .ctl[dsf_bts_kernel] = (1 << 5), .ctl[dsf_bts_user] = (1 << 6), @@ -904,7 +904,7 @@ static const struct ds_configuration ds_cfg_netburst = { #endif }; static const struct ds_configuration ds_cfg_pentium_m = { - .name = "pentium m", + .name = "Pentium M", .ctl[dsf_bts] = (1 << 6) | (1 << 7), .sizeof_field = sizeof(long), @@ -915,8 +915,8 @@ static const struct ds_configuration ds_cfg_pentium_m = { .sizeof_rec[ds_pebs] = sizeof(long) * 18, #endif }; -static const struct ds_configuration ds_cfg_core2 = { - .name = "core 2", +static const struct ds_configuration ds_cfg_core2_atom = { + .name = "Core 2/Atom", .ctl[dsf_bts] = (1 << 6) | (1 << 7), .ctl[dsf_bts_kernel] = (1 << 9), .ctl[dsf_bts_user] = (1 << 10), @@ -949,19 +949,22 @@ void __cpuinit ds_init_intel(struct cpuinfo_x86 *c) switch (c->x86) { case 0x6: switch (c->x86_model) { - case 0 ... 0xC: - /* sorry, don't know about them */ - break; - case 0xD: - case 0xE: /* Pentium M */ + case 0x9: + case 0xd: /* Pentium M */ ds_configure(&ds_cfg_pentium_m); break; - default: /* Core2, Atom, ... */ - ds_configure(&ds_cfg_core2); + case 0xf: + case 0x17: /* Core2 */ + case 0x1c: /* Atom */ + ds_configure(&ds_cfg_core2_atom); + break; + case 0x1a: /* i7 */ + default: + /* sorry, don't know about them */ break; } break; - case 0xF: + case 0xf: switch (c->x86_model) { case 0x0: case 0x1: -- cgit v1.2.1 From 00a602db1ce9d61319d6f769dee206ec85f19bda Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 23 Jan 2009 11:55:42 +0100 Subject: ALSA: hda - Fix PCM reference NID for STAC/IDT analog outputs The reference NID for the analog outputs of STAC/IDT codecs is set to a fixed number 0x02. But this isn't always correct and in many codecs it points to a non-existing NID. This patch fixes the initialization of the PCM reference NID taken from the actually probed DAC list. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 3dd4eee70b7c..b787b3cc096f 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -2539,6 +2539,8 @@ static int stac92xx_build_pcms(struct hda_codec *codec) info->name = "STAC92xx Analog"; info->stream[SNDRV_PCM_STREAM_PLAYBACK] = stac92xx_pcm_analog_playback; + info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = + spec->multiout.dac_nids[0]; info->stream[SNDRV_PCM_STREAM_CAPTURE] = stac92xx_pcm_analog_capture; info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adc_nids[0]; info->stream[SNDRV_PCM_STREAM_CAPTURE].substreams = spec->num_adcs; -- cgit v1.2.1 From 8f5140a6a0b1a9aa79585b0008e88c5d266c5c1d Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Fri, 23 Jan 2009 12:57:20 +0000 Subject: uwb: lock rc->rsvs_lock with spin_lock_bh() rc->rsvs_lock may be taken in a timer so lock it with spin_lock_bh(). Signed-off-by: David Vrabel --- drivers/uwb/drp.c | 4 ++-- drivers/uwb/rsv.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/uwb/drp.c b/drivers/uwb/drp.c index 2b4f9406789d..4f5ca99a04b9 100644 --- a/drivers/uwb/drp.c +++ b/drivers/uwb/drp.c @@ -66,14 +66,14 @@ static void uwb_rc_set_drp_cmd_done(struct uwb_rc *rc, void *arg, } else dev_err(&rc->uwb_dev.dev, "SET-DRP-IE: timeout\n"); - spin_lock(&rc->rsvs_lock); + spin_lock_bh(&rc->rsvs_lock); if (rc->set_drp_ie_pending > 1) { rc->set_drp_ie_pending = 0; uwb_rsv_queue_update(rc); } else { rc->set_drp_ie_pending = 0; } - spin_unlock(&rc->rsvs_lock); + spin_unlock_bh(&rc->rsvs_lock); } /** diff --git a/drivers/uwb/rsv.c b/drivers/uwb/rsv.c index 886f977cd2ea..6b76f4bb4cc7 100644 --- a/drivers/uwb/rsv.c +++ b/drivers/uwb/rsv.c @@ -870,7 +870,7 @@ void uwb_rsv_queue_update(struct uwb_rc *rc) */ void uwb_rsv_sched_update(struct uwb_rc *rc) { - spin_lock(&rc->rsvs_lock); + spin_lock_bh(&rc->rsvs_lock); if (!delayed_work_pending(&rc->rsv_update_work)) { if (rc->set_drp_ie_pending > 0) { rc->set_drp_ie_pending++; @@ -879,7 +879,7 @@ void uwb_rsv_sched_update(struct uwb_rc *rc) uwb_rsv_queue_update(rc); } unlock: - spin_unlock(&rc->rsvs_lock); + spin_unlock_bh(&rc->rsvs_lock); } /* -- cgit v1.2.1 From b006854955254a971096c120d4ef115a7c6145fb Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Mon, 5 Jan 2009 20:43:23 +0100 Subject: firewire: ohci: change "context_stop: still active" log message The present message is mostly just noise. We only need to be notified if the "active" flag does not go off before the retry loop terminates. Signed-off-by: Stefan Richter --- drivers/firewire/fw-ohci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index ab9c01e462ef..9bedd6159f28 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -896,11 +896,11 @@ static void context_stop(struct context *ctx) for (i = 0; i < 10; i++) { reg = reg_read(ctx->ohci, CONTROL_SET(ctx->regs)); if ((reg & CONTEXT_ACTIVE) == 0) - break; + return; - fw_notify("context_stop: still active (0x%08x)\n", reg); mdelay(1); } + fw_error("Error: DMA context still active (0x%08x)\n", reg); } struct driver_data { -- cgit v1.2.1 From 8b7b6afaa84708d08139daa08538ca3e56c351f1 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Tue, 20 Jan 2009 19:10:58 +0100 Subject: firewire: ohci: increase AT req. retries, fix ack_busy_X from Panasonic camcorders and others Camcorders have a tendency to fail read requests to their config ROM and write request to their FCP command register with ack_busy_X. This has become a problem with newer kernels and especially Panasonic camcorders, causing AV/C in dvgrab and kino to fail. Dvgrab for example frequently logs "send oops"; kino reports loss of AV/C control. I suspect that lower CPU scheduling latencies in newer kernels made this issue more prominent now. According to https://sourceforge.net/tracker/?func=detail&atid=114103&aid=2492640&group_id=14103 this can be fixed by configuring the FireWire controller for more hardware retries for request transmission; these retries are evidently more successful than libavc1394's own retry loop (typically 3 tries on top of hardware retries). Presumably the same issue has been reported at https://bugzilla.redhat.com/show_bug.cgi?id=449252 and https://bugzilla.redhat.com/show_bug.cgi?id=477279 . In a quick test with a JVC camcorder (which didn't malfunction like the reported camcorders), this change decreased the number of ack_busy_X from 16 in three runs of dvgrab to 4 in three runs of the same capture duration. Signed-off-by: Stefan Richter --- drivers/firewire/fw-ohci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index 9bedd6159f28..6d19828a93a5 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -226,7 +226,7 @@ static inline struct fw_ohci *fw_ohci(struct fw_card *card) #define CONTEXT_DEAD 0x0800 #define CONTEXT_ACTIVE 0x0400 -#define OHCI1394_MAX_AT_REQ_RETRIES 0x2 +#define OHCI1394_MAX_AT_REQ_RETRIES 0xf #define OHCI1394_MAX_AT_RESP_RETRIES 0x2 #define OHCI1394_MAX_PHYS_RESP_RETRIES 0x8 -- cgit v1.2.1 From 64c634ef83991b390ec0503e61f16efb0ba3c60b Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Tue, 20 Jan 2009 19:09:58 +0100 Subject: ieee1394: ohci1394: increase AT req. retries, fix ack_busy_X from Panasonic camcorders and others Camcorders have a tendency to fail read requests to their config ROM and write request to their FCP command register with ack_busy_X. This has become a problem with newer kernels and especially Panasonic camcorders, causing AV/C in dvgrab and kino to fail. Dvgrab for example frequently logs "send oops"; kino reports loss of AV/C control. I suspect that lower CPU scheduling latencies in newer kernels made this issue more prominent now. According to https://sourceforge.net/tracker/?func=detail&atid=114103&aid=2492640&group_id=14103 this can be fixed by configuring the FireWire controller for more hardware retries for request transmission; these retries are evidently more successful than libavc1394's own retry loop (typically 3 tries on top of hardware retries). Presumably the same issue has been reported at https://bugzilla.redhat.com/show_bug.cgi?id=449252 and https://bugzilla.redhat.com/show_bug.cgi?id=477279 . Tested-by: Mathias Beilstein Signed-off-by: Stefan Richter --- drivers/ieee1394/ohci1394.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ieee1394/ohci1394.h b/drivers/ieee1394/ohci1394.h index 4320bf010495..7fb8ab9780ae 100644 --- a/drivers/ieee1394/ohci1394.h +++ b/drivers/ieee1394/ohci1394.h @@ -26,7 +26,7 @@ #define OHCI1394_DRIVER_NAME "ohci1394" -#define OHCI1394_MAX_AT_REQ_RETRIES 0x2 +#define OHCI1394_MAX_AT_REQ_RETRIES 0xf #define OHCI1394_MAX_AT_RESP_RETRIES 0x2 #define OHCI1394_MAX_PHYS_RESP_RETRIES 0x8 #define OHCI1394_MAX_SELF_ID_ERRORS 16 -- cgit v1.2.1 From e747a5c0be3efe5465e45c8e326bc766b1288be6 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 24 Jan 2009 20:35:38 +0100 Subject: firewire: core: optimize card shutdown This fixes a regression by "firewire: keep highlevel drivers attached during brief connection loss": There were 2 seconds unnecessary waiting added to the shutdown procedure of each controller. We use card->link as status flag to signal the device handler that there is no use to wait for a come-back. Signed-off-by: Stefan Richter --- drivers/firewire/fw-card.c | 2 +- drivers/firewire/fw-device.c | 6 ++++-- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/firewire/fw-card.c b/drivers/firewire/fw-card.c index 17a80cecdc14..7be2cf3514e7 100644 --- a/drivers/firewire/fw-card.c +++ b/drivers/firewire/fw-card.c @@ -512,7 +512,7 @@ fw_core_remove_card(struct fw_card *card) fw_core_initiate_bus_reset(card, 1); mutex_lock(&card_mutex); - list_del(&card->link); + list_del_init(&card->link); mutex_unlock(&card_mutex); /* Set up the dummy driver. */ diff --git a/drivers/firewire/fw-device.c b/drivers/firewire/fw-device.c index 0925d91b2610..bf53acb45652 100644 --- a/drivers/firewire/fw-device.c +++ b/drivers/firewire/fw-device.c @@ -657,7 +657,8 @@ static void fw_device_shutdown(struct work_struct *work) container_of(work, struct fw_device, work.work); int minor = MINOR(device->device.devt); - if (time_is_after_jiffies(device->card->reset_jiffies + SHUTDOWN_DELAY)) { + if (time_is_after_jiffies(device->card->reset_jiffies + SHUTDOWN_DELAY) + && !list_empty(&device->card->link)) { schedule_delayed_work(&device->work, SHUTDOWN_DELAY); return; } @@ -1074,7 +1075,8 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event) if (atomic_xchg(&device->state, FW_DEVICE_GONE) == FW_DEVICE_RUNNING) { PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown); - schedule_delayed_work(&device->work, SHUTDOWN_DELAY); + schedule_delayed_work(&device->work, + list_empty(&card->link) ? 0 : SHUTDOWN_DELAY); } break; } -- cgit v1.2.1 From 3a9f84d354ce1e19956083c8e691727dea33bd5a Mon Sep 17 00:00:00 2001 From: Ed Swierk Date: Mon, 26 Jan 2009 15:33:31 -0800 Subject: signals, debug: fix BUG: using smp_processor_id() in preemptible code in print_fatal_signal() With print-fatal-signals=1 on a kernel with CONFIG_PREEMPT=y, sending an unexpected signal to a process causes a BUG: using smp_processor_id() in preemptible code. get_signal_to_deliver() releases the siglock before calling print_fatal_signal(), which calls show_regs(), which calls smp_processor_id(), which is not supposed to be called from a preemptible thread. Make sure show_regs() runs with preemption disabled. Signed-off-by: Ed Swierk Signed-off-by: Ingo Molnar --- kernel/signal.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/signal.c b/kernel/signal.c index e73759783dc8..b6b36768b758 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -909,7 +909,9 @@ static void print_fatal_signal(struct pt_regs *regs, int signr) } #endif printk("\n"); + preempt_disable(); show_regs(regs); + preempt_enable(); } static int __init setup_print_fatal_signals(char *str) -- cgit v1.2.1 From fdff73f094e7220602cc3f8959c7230517976412 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Mon, 26 Jan 2009 19:06:41 -0500 Subject: ext4: Initialize the new group descriptor when resizing the filesystem Make sure all of the fields of the group descriptor are properly initialized. Previously, we allowed bg_flags field to be contain random garbage, which could trigger non-deterministic behavior, including a kernel OOPS. http://bugzilla.kernel.org/show_bug.cgi?id=12433 Signed-off-by: "Theodore Ts'o" Cc: stable@kernel.org --- fs/ext4/resize.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c index c328be5d6885..c06886abd658 100644 --- a/fs/ext4/resize.c +++ b/fs/ext4/resize.c @@ -861,12 +861,13 @@ int ext4_group_add(struct super_block *sb, struct ext4_new_group_data *input) gdp = (struct ext4_group_desc *)((char *)primary->b_data + gdb_off * EXT4_DESC_SIZE(sb)); + memset(gdp, 0, EXT4_DESC_SIZE(sb)); ext4_block_bitmap_set(sb, gdp, input->block_bitmap); /* LV FIXME */ ext4_inode_bitmap_set(sb, gdp, input->inode_bitmap); /* LV FIXME */ ext4_inode_table_set(sb, gdp, input->inode_table); /* LV FIXME */ ext4_free_blks_set(sb, gdp, input->free_blocks_count); ext4_free_inodes_set(sb, gdp, EXT4_INODES_PER_GROUP(sb)); - gdp->bg_flags |= cpu_to_le16(EXT4_BG_INODE_ZEROED); + gdp->bg_flags = cpu_to_le16(EXT4_BG_INODE_ZEROED); gdp->bg_checksum = ext4_group_desc_csum(sbi, input->group, gdp); /* -- cgit v1.2.1 From 9fd9784c91db79e953ea3fe3741f885bdc390a72 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Mon, 26 Jan 2009 19:26:26 -0500 Subject: ext4: Fix building with EXT4FS_DEBUG When bg_free_blocks_count was renamed to bg_free_blocks_count_lo in 560671a0, its uses under EXT4FS_DEBUG were not changed to the helper ext4_free_blks_count. Another commit, 498e5f24, also did not change everything needed under EXT4FS_DEBUG, thus making it spill some warnings related to printing format. This commit fixes both issues and makes ext4 build again when EXT4FS_DEBUG is enabled. Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: "Theodore Ts'o" --- fs/ext4/balloc.c | 6 +++--- fs/ext4/extents.c | 2 +- fs/ext4/mballoc.c | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c index 6bba06b09dd1..9a50b8052dcf 100644 --- a/fs/ext4/balloc.c +++ b/fs/ext4/balloc.c @@ -684,15 +684,15 @@ ext4_fsblk_t ext4_count_free_blocks(struct super_block *sb) gdp = ext4_get_group_desc(sb, i, NULL); if (!gdp) continue; - desc_count += le16_to_cpu(gdp->bg_free_blocks_count); + desc_count += ext4_free_blks_count(sb, gdp); brelse(bitmap_bh); bitmap_bh = ext4_read_block_bitmap(sb, i); if (bitmap_bh == NULL) continue; x = ext4_count_free(bitmap_bh, sb->s_blocksize); - printk(KERN_DEBUG "group %lu: stored = %d, counted = %u\n", - i, le16_to_cpu(gdp->bg_free_blocks_count), x); + printk(KERN_DEBUG "group %u: stored = %d, counted = %u\n", + i, ext4_free_blks_count(sb, gdp), x); bitmap_count += x; } brelse(bitmap_bh); diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 54bf0623a9ae..e2eab196875f 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -3048,7 +3048,7 @@ retry: WARN_ON(ret <= 0); printk(KERN_ERR "%s: ext4_ext_get_blocks " "returned error inode#%lu, block=%u, " - "max_blocks=%lu", __func__, + "max_blocks=%u", __func__, inode->i_ino, block, max_blocks); #endif ext4_mark_inode_dirty(handle, inode); diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 918aec0c8a11..deba54f6cbed 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -3025,7 +3025,7 @@ ext4_mb_mark_diskspace_used(struct ext4_allocation_context *ac, goto out_err; ext4_debug("using block group %u(%d)\n", ac->ac_b_ex.fe_group, - gdp->bg_free_blocks_count); + ext4_free_blks_count(sb, gdp)); err = ext4_journal_get_write_access(handle, gdp_bh); if (err) -- cgit v1.2.1 From 8527bec548e01a29c6d1928d20d6d3be71861482 Mon Sep 17 00:00:00 2001 From: "Ira W. Snyder" Date: Mon, 26 Jan 2009 21:00:33 -0800 Subject: virtio_net: use correct accessors for scatterlists Without this fix, virtio_net makes incorrect usage of scatterlists. It sets the end of the scatterlist chain after the first element, despite the fact that more entries come after it. If you try to run dma_map_sg() on one of the scatterlists given to you by add_buf(), you will get a null pointer oops. Signed-off-by: Ira W. Snyder Signed-off-by: Rusty Russell Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 63ef2a8905fb..c68808336c8c 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -287,7 +287,7 @@ static void try_fill_recv_maxbufs(struct virtnet_info *vi) skb_put(skb, MAX_PACKET_LEN); hdr = skb_vnet_hdr(skb); - sg_init_one(sg, hdr, sizeof(*hdr)); + sg_set_buf(sg, hdr, sizeof(*hdr)); if (vi->big_packets) { for (i = 0; i < MAX_SKB_FRAGS; i++) { @@ -488,9 +488,9 @@ static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb) /* Encode metadata header at front. */ if (vi->mergeable_rx_bufs) - sg_init_one(sg, mhdr, sizeof(*mhdr)); + sg_set_buf(sg, mhdr, sizeof(*mhdr)); else - sg_init_one(sg, hdr, sizeof(*hdr)); + sg_set_buf(sg, hdr, sizeof(*hdr)); num = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1; -- cgit v1.2.1 From 98322f22eca889478045cf896b572250d03dc45f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 26 Jan 2009 21:35:35 -0800 Subject: udp: optimize bind(0) if many ports are in use commit 9088c5609584684149f3fb5b065aa7f18dcb03ff (udp: Improve port randomization) introduced a regression for UDP bind() syscall to null port (getting a random port) in case lot of ports are already in use. This is because we do about 28000 scans of very long chains (220 sockets per chain), with many spin_lock_bh()/spin_unlock_bh() calls. Fix this using a bitmap (64 bytes for current value of UDP_HTABLE_SIZE) so that we scan chains at most once. Instead of 250 ms per bind() call, we get after patch a time of 2.9 ms Based on a report from Vitaly Mayatskikh Reported-by: Vitaly Mayatskikh Signed-off-by: Eric Dumazet Tested-by: Vitaly Mayatskikh Signed-off-by: David S. Miller --- net/ipv4/udp.c | 55 +++++++++++++++++++++++++++++++++++++++---------------- 1 file changed, 39 insertions(+), 16 deletions(-) diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index cf5ab0581eba..b7faffe5c029 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -120,8 +120,11 @@ EXPORT_SYMBOL(sysctl_udp_wmem_min); atomic_t udp_memory_allocated; EXPORT_SYMBOL(udp_memory_allocated); +#define PORTS_PER_CHAIN (65536 / UDP_HTABLE_SIZE) + static int udp_lib_lport_inuse(struct net *net, __u16 num, const struct udp_hslot *hslot, + unsigned long *bitmap, struct sock *sk, int (*saddr_comp)(const struct sock *sk1, const struct sock *sk2)) @@ -132,12 +135,17 @@ static int udp_lib_lport_inuse(struct net *net, __u16 num, sk_nulls_for_each(sk2, node, &hslot->head) if (net_eq(sock_net(sk2), net) && sk2 != sk && - sk2->sk_hash == num && + (bitmap || sk2->sk_hash == num) && (!sk2->sk_reuse || !sk->sk_reuse) && (!sk2->sk_bound_dev_if || !sk->sk_bound_dev_if || sk2->sk_bound_dev_if == sk->sk_bound_dev_if) && - (*saddr_comp)(sk, sk2)) - return 1; + (*saddr_comp)(sk, sk2)) { + if (bitmap) + __set_bit(sk2->sk_hash / UDP_HTABLE_SIZE, + bitmap); + else + return 1; + } return 0; } @@ -160,32 +168,47 @@ int udp_lib_get_port(struct sock *sk, unsigned short snum, if (!snum) { int low, high, remaining; unsigned rand; - unsigned short first; + unsigned short first, last; + DECLARE_BITMAP(bitmap, PORTS_PER_CHAIN); inet_get_local_port_range(&low, &high); remaining = (high - low) + 1; rand = net_random(); - snum = first = rand % remaining + low; - rand |= 1; - for (;;) { - hslot = &udptable->hash[udp_hashfn(net, snum)]; + first = (((u64)rand * remaining) >> 32) + low; + /* + * force rand to be an odd multiple of UDP_HTABLE_SIZE + */ + rand = (rand | 1) * UDP_HTABLE_SIZE; + for (last = first + UDP_HTABLE_SIZE; first != last; first++) { + hslot = &udptable->hash[udp_hashfn(net, first)]; + bitmap_zero(bitmap, PORTS_PER_CHAIN); spin_lock_bh(&hslot->lock); - if (!udp_lib_lport_inuse(net, snum, hslot, sk, saddr_comp)) - break; - spin_unlock_bh(&hslot->lock); + udp_lib_lport_inuse(net, snum, hslot, bitmap, sk, + saddr_comp); + + snum = first; + /* + * Iterate on all possible values of snum for this hash. + * Using steps of an odd multiple of UDP_HTABLE_SIZE + * give us randomization and full range coverage. + */ do { - snum = snum + rand; - } while (snum < low || snum > high); - if (snum == first) - goto fail; + if (low <= snum && snum <= high && + !test_bit(snum / UDP_HTABLE_SIZE, bitmap)) + goto found; + snum += rand; + } while (snum != first); + spin_unlock_bh(&hslot->lock); } + goto fail; } else { hslot = &udptable->hash[udp_hashfn(net, snum)]; spin_lock_bh(&hslot->lock); - if (udp_lib_lport_inuse(net, snum, hslot, sk, saddr_comp)) + if (udp_lib_lport_inuse(net, snum, hslot, NULL, sk, saddr_comp)) goto fail_unlock; } +found: inet_sk(sk)->num = snum; sk->sk_hash = snum; if (sk_unhashed(sk)) { -- cgit v1.2.1 From a7a41acf99d9150b424839b0d7b4f5ad9d211e2d Mon Sep 17 00:00:00 2001 From: Manish Katiyar Date: Mon, 26 Jan 2009 21:54:21 -0800 Subject: r6040: Remove unused variable pdev from drivers/net/r6040.c drivers/net/r6040.c:441: warning: unused variable 'pdev' Signed-off-by: Manish Katiyar Signed-off-by: David S. Miller --- drivers/net/r6040.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c index 72fd9e97c190..b2dcdb5ed8bd 100644 --- a/drivers/net/r6040.c +++ b/drivers/net/r6040.c @@ -438,7 +438,6 @@ static void r6040_down(struct net_device *dev) { struct r6040_private *lp = netdev_priv(dev); void __iomem *ioaddr = lp->base; - struct pci_dev *pdev = lp->pdev; int limit = 2048; u16 *adrp; u16 cmd; -- cgit v1.2.1 From 9fa5fdf291c9b58b1cb8b4bb2a0ee57efa21d635 Mon Sep 17 00:00:00 2001 From: Dimitris Michailidis Date: Mon, 26 Jan 2009 22:15:31 -0800 Subject: tcp: Fix length tcp_splice_data_recv passes to skb_splice_bits. tcp_splice_data_recv has two lengths to consider: the len parameter it gets from tcp_read_sock, which specifies the amount of data in the skb, and rd_desc->count, which is the amount of data the splice caller still wants. Currently it passes just the latter to skb_splice_bits, which then splices min(rd_desc->count, skb->len - offset) bytes. Most of the time this is fine, except when the skb contains urgent data. In that case len goes only up to the urgent byte and is less than skb->len - offset. By ignoring len tcp_splice_data_recv may a) splice data tcp_read_sock told it not to, b) return to tcp_read_sock a value > len. Now, tcp_read_sock doesn't handle used > len and leaves the socket in a bad state (both sk_receive_queue and copied_seq are bad at that point) resulting in duplicated data and corruption. Fix by passing min(rd_desc->count, len) to skb_splice_bits. Signed-off-by: Dimitris Michailidis Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 0cd71b84e483..76b148bcb0dc 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -524,7 +524,8 @@ static int tcp_splice_data_recv(read_descriptor_t *rd_desc, struct sk_buff *skb, struct tcp_splice_state *tss = rd_desc->arg.data; int ret; - ret = skb_splice_bits(skb, offset, tss->pipe, rd_desc->count, tss->flags); + ret = skb_splice_bits(skb, offset, tss->pipe, min(rd_desc->count, len), + tss->flags); if (ret > 0) rd_desc->count -= ret; return ret; -- cgit v1.2.1 From aa9d823bb347fb66cb07f98c686be8bb85cb6a74 Mon Sep 17 00:00:00 2001 From: Joerg Schirottke Date: Tue, 27 Jan 2009 11:01:34 +0100 Subject: ALSA: hda - Add quirk for HP DV6700 laptop Added the matching model=laptop for HP DV6700 laptop. Signed-off-by: Joerg Schirottke Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 75de40aaab0a..9ae72b803f2d 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -1566,6 +1566,7 @@ static struct snd_pci_quirk cxt5047_cfg_tbl[] = { SND_PCI_QUIRK(0x103c, 0x30a5, "HP DV5200T/DV8000T", CXT5047_LAPTOP_HP), SND_PCI_QUIRK(0x103c, 0x30b2, "HP DV2000T/DV3000T", CXT5047_LAPTOP), SND_PCI_QUIRK(0x103c, 0x30b5, "HP DV2000Z", CXT5047_LAPTOP), + SND_PCI_QUIRK(0x103c, 0x30cf, "HP DV6700", CXT5047_LAPTOP), SND_PCI_QUIRK(0x1179, 0xff31, "Toshiba P100", CXT5047_LAPTOP_EAPD), {} }; -- cgit v1.2.1 From 5801f992276366cd6a4f1f9939a4c9da33d499ee Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 27 Jan 2009 12:53:22 +0100 Subject: ALSA: hda - Fix compile warning with CONFIG_SND_JACK=n sound/pci/hda/patch_conexant.c:352: warning: 'conexant_add_jack' defined but not used Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 9ae72b803f2d..0177ef8f4c9e 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -347,6 +347,7 @@ static int conexant_mux_enum_put(struct snd_kcontrol *kcontrol, &spec->cur_mux[adc_idx]); } +#ifdef CONFIG_SND_JACK static int conexant_add_jack(struct hda_codec *codec, hda_nid_t nid, int type) { @@ -394,7 +395,6 @@ static void conexant_report_jack(struct hda_codec *codec, hda_nid_t nid) static int conexant_init_jacks(struct hda_codec *codec) { -#ifdef CONFIG_SND_JACK struct conexant_spec *spec = codec->spec; int i; @@ -422,10 +422,19 @@ static int conexant_init_jacks(struct hda_codec *codec) ++hv; } } -#endif return 0; } +#else +static inline void conexant_report_jack(struct hda_codec *codec, hda_nid_t nid) +{ +} + +static inline int conexant_init_jacks(struct hda_codec *codec) +{ + return 0; +} +#endif static int conexant_init(struct hda_codec *codec) { -- cgit v1.2.1 From 766fb95ba06e1bbf531d30dc05e21b2d4a0e8dd2 Mon Sep 17 00:00:00 2001 From: Sidney Amani Date: Tue, 27 Jan 2009 10:11:46 +0100 Subject: UBI: allow direct user-space I/O Introduce a new ioctl UBI_IOCSETPROP to set properties on a volume. Also add the first property: UBI_PROP_DIRECT_WRITE, this property is used to set the ability to use direct writes in userspace Signed-off-by: Sidney Amani Signed-off-by: Corentin Chary Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/Kconfig.debug | 10 ---------- drivers/mtd/ubi/cdev.c | 36 ++++++++++++++++++++++++++++-------- drivers/mtd/ubi/ubi.h | 5 ++++- include/mtd/ubi-user.h | 34 ++++++++++++++++++++++++++++++++++ 4 files changed, 66 insertions(+), 19 deletions(-) diff --git a/drivers/mtd/ubi/Kconfig.debug b/drivers/mtd/ubi/Kconfig.debug index 1e2ee22edeff..2246f154e2f7 100644 --- a/drivers/mtd/ubi/Kconfig.debug +++ b/drivers/mtd/ubi/Kconfig.debug @@ -33,16 +33,6 @@ config MTD_UBI_DEBUG_DISABLE_BGT This option switches the background thread off by default. The thread may be also be enabled/disabled via UBI sysfs. -config MTD_UBI_DEBUG_USERSPACE_IO - bool "Direct user-space write/erase support" - default n - depends on MTD_UBI_DEBUG - help - By default, users cannot directly write and erase individual - eraseblocks of dynamic volumes, and have to use update operation - instead. This option enables this capability - it is very useful for - debugging and testing. - config MTD_UBI_DEBUG_EMULATE_BITFLIPS bool "Emulate flash bit-flips" depends on MTD_UBI_DEBUG diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index f9631eb3fef3..e63c8fc3df3a 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -259,12 +259,9 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count, return err ? err : count_save - count; } -#ifdef CONFIG_MTD_UBI_DEBUG_USERSPACE_IO - /* * This function allows to directly write to dynamic UBI volumes, without - * issuing the volume update operation. Available only as a debugging feature. - * Very useful for testing UBI. + * issuing the volume update operation. */ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf, size_t count, loff_t *offp) @@ -276,6 +273,9 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf, size_t count_save = count; char *tbuf; + if (!vol->direct_writes) + return -EPERM; + dbg_gen("requested: write %zd bytes to offset %lld of volume %u", count, *offp, vol->vol_id); @@ -339,10 +339,6 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf, return err ? err : count_save - count; } -#else -#define vol_cdev_direct_write(file, buf, count, offp) (-EPERM) -#endif /* CONFIG_MTD_UBI_DEBUG_USERSPACE_IO */ - static ssize_t vol_cdev_write(struct file *file, const char __user *buf, size_t count, loff_t *offp) { @@ -552,6 +548,30 @@ static long vol_cdev_ioctl(struct file *file, unsigned int cmd, break; } + /* Set volume property command*/ + case UBI_IOCSETPROP: + { + struct ubi_set_prop_req req; + + err = copy_from_user(&req, argp, + sizeof(struct ubi_set_prop_req)); + if (err) { + err = -EFAULT; + break; + } + switch (req.property) { + case UBI_PROP_DIRECT_WRITE: + mutex_lock(&ubi->volumes_mutex); + desc->vol->direct_writes = !!req.value; + mutex_unlock(&ubi->volumes_mutex); + break; + default: + err = -EINVAL; + break; + } + break; + } + default: err = -ENOTTY; break; diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h index 381f0e1d0a74..c055511bb1b2 100644 --- a/drivers/mtd/ubi/ubi.h +++ b/drivers/mtd/ubi/ubi.h @@ -206,6 +206,7 @@ struct ubi_volume_desc; * @upd_marker: %1 if the update marker is set for this volume * @updating: %1 if the volume is being updated * @changing_leb: %1 if the atomic LEB change ioctl command is in progress + * @direct_writes: %1 if direct writes are enabled for this volume * * @gluebi_desc: gluebi UBI volume descriptor * @gluebi_refcount: reference count of the gluebi MTD device @@ -253,6 +254,7 @@ struct ubi_volume { unsigned int upd_marker:1; unsigned int updating:1; unsigned int changing_leb:1; + unsigned int direct_writes:1; #ifdef CONFIG_MTD_UBI_GLUEBI /* @@ -304,7 +306,8 @@ struct ubi_wl_entry; * @vtbl_size: size of the volume table in bytes * @vtbl: in-RAM volume table copy * @volumes_mutex: protects on-flash volume table and serializes volume - * changes, like creation, deletion, update, re-size and re-name + * changes, like creation, deletion, update, re-size, + * re-name and set property * * @max_ec: current highest erase counter value * @mean_ec: current mean erase counter value diff --git a/include/mtd/ubi-user.h b/include/mtd/ubi-user.h index 82113e160a2c..296efae3525e 100644 --- a/include/mtd/ubi-user.h +++ b/include/mtd/ubi-user.h @@ -124,6 +124,14 @@ * To check if a logical eraseblock is mapped to a physical eraseblock, the * %UBI_IOCEBISMAP ioctl command should be used. It returns %0 if the LEB is * not mapped, and %1 if it is mapped. + * + * Set an UBI volume property + * ~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * To set an UBI volume property the %UBI_IOCSETPROP ioctl command should be + * used. A pointer to a &struct ubi_set_prop_req object is expected to be + * passed. The object describes which property should be set, and to which value + * it should be set. */ /* @@ -175,6 +183,8 @@ #define UBI_IOCEBUNMAP _IOW(UBI_VOL_IOC_MAGIC, 4, int32_t) /* Check if LEB is mapped command */ #define UBI_IOCEBISMAP _IOR(UBI_VOL_IOC_MAGIC, 5, int32_t) +/* Set an UBI volume property */ +#define UBI_IOCSETPROP _IOW(UBI_VOL_IOC_MAGIC, 6, struct ubi_set_prop_req) /* Maximum MTD device name length supported by UBI */ #define MAX_UBI_MTD_NAME_LEN 127 @@ -210,6 +220,16 @@ enum { UBI_STATIC_VOLUME = 4, }; +/* + * UBI set property ioctl constants + * + * @UBI_PROP_DIRECT_WRITE: allow / disallow user to directly write and + * erase individual eraseblocks on dynamic volumes + */ +enum { + UBI_PROP_DIRECT_WRITE = 1, +}; + /** * struct ubi_attach_req - attach MTD device request. * @ubi_num: UBI device number to create @@ -373,4 +393,18 @@ struct ubi_map_req { int8_t padding[3]; } __attribute__ ((packed)); + +/** + * struct ubi_set_prop_req - a data structure used to set an ubi volume + * property. + * @property: property to set (%UBI_PROP_DIRECT_WRITE) + * @padding: reserved for future, not used, has to be zeroed + * @value: value to set + */ +struct ubi_set_prop_req { + uint8_t property; + uint8_t padding[7]; + uint64_t value; +} __attribute__ ((packed)); + #endif /* __UBI_USER_H__ */ -- cgit v1.2.1 From 418e4da33f45fd7bdcce48778b149b780ff730bc Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 26 Jan 2009 21:43:08 +0100 Subject: PCI PM: Fix suspend error paths and testing facility breakage If one of device drivers refuses to suspend by returning error code from its ->suspend() callback, the devices that have already been suspended are resumed by executing their drivers' ->resume() callbacks. Some of these callbacks expect the device's configuration space to be restored if the device has been put into D3 before they are called. Unfortunately, this mechanism has been broken by recent changes moving the restoration of config spaces of some devices (most importantly, USB controllers and HDA Intel) into the resume callbacks executed with interrupts off. Obviously, these callbacks are not invoked in the suspend error path and, as a result, the system cannot be successfully brought back into the working state in case of a suspend error. The same thing happens in the hibernation error path right before putting the system into S4. Similarly, the suspend testing facility associated with the /sys/power/pm_test file is broken, because it uses the very same mechanism that is used in the suspend and hibernation error paths. Fix the breakage by making the PCI core restore the configuration spaces of PCI devices that haven't been restored already before pci_pm_resume() is called for those devices by the PM core. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci-driver.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 9de07b75b993..4884c4840b3d 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -370,6 +370,7 @@ static int pci_legacy_suspend(struct device *dev, pm_message_t state) } pci_save_state(pci_dev); + pci_dev->state_saved = true; /* * This is for compatibility with existing code with legacy PM support. */ @@ -419,6 +420,7 @@ static int pci_legacy_resume(struct device *dev) static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev) { pci_restore_standard_config(pci_dev); + pci_dev->state_saved = false; pci_fixup_device(pci_fixup_resume_early, pci_dev); } @@ -555,6 +557,13 @@ static int pci_pm_resume(struct device *dev) struct device_driver *drv = dev->driver; int error = 0; + /* + * This is necessary for the suspend error path in which resume is + * called without restoring the standard config registers of the device. + */ + if (pci_dev->state_saved) + pci_restore_standard_config(pci_dev); + if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_resume(dev); @@ -710,6 +719,13 @@ static int pci_pm_restore(struct device *dev) struct device_driver *drv = dev->driver; int error = 0; + /* + * This is necessary for the hibernation error path in which restore is + * called without restoring the standard config registers of the device. + */ + if (pci_dev->state_saved) + pci_restore_standard_config(pci_dev); + if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_resume(dev); -- cgit v1.2.1 From 57064d213d2e44654d4f13c66df135b5e7389a26 Mon Sep 17 00:00:00 2001 From: Seth Heasley Date: Fri, 23 Jan 2009 12:43:38 -0800 Subject: PCI: irq and pci_ids patch for Intel Tigerpoint DeviceIDs This patch adds the Intel Tigerpoint LPC Controller DeviceIDs. Signed-off-by: Seth Heasley Signed-off-by: Jesse Barnes --- arch/x86/pci/irq.c | 1 + include/linux/pci_ids.h | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index 4064345cf144..fecbce6e7d7c 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c @@ -572,6 +572,7 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route case PCI_DEVICE_ID_INTEL_ICH7_1: case PCI_DEVICE_ID_INTEL_ICH7_30: case PCI_DEVICE_ID_INTEL_ICH7_31: + case PCI_DEVICE_ID_INTEL_TGP_LPC: case PCI_DEVICE_ID_INTEL_ESB2_0: case PCI_DEVICE_ID_INTEL_ICH8_0: case PCI_DEVICE_ID_INTEL_ICH8_1: diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index d56ad9c21c09..6f260b50253b 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2421,6 +2421,7 @@ #define PCI_DEVICE_ID_INTEL_ICH7_0 0x27b8 #define PCI_DEVICE_ID_INTEL_ICH7_1 0x27b9 #define PCI_DEVICE_ID_INTEL_ICH7_30 0x27b0 +#define PCI_DEVICE_ID_INTEL_TGP_LPC 0x27bc #define PCI_DEVICE_ID_INTEL_ICH7_31 0x27bd #define PCI_DEVICE_ID_INTEL_ICH7_17 0x27da #define PCI_DEVICE_ID_INTEL_ICH7_19 0x27dd -- cgit v1.2.1 From 545ffd58adc86b8d33449dab44fe81b503a6f81b Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 22 Jan 2009 23:36:56 +0100 Subject: PCI PM: Fix hibernation breakage on EeePC 701 Hibernation breaks on EeePC 701 as a result of attempting to put one of its (driverless) devices into a low power state. Avoid that by not attepmting to power manage driverless devices during hibernation. Signed-off-by: Rafael J. Wysocki Reported-and-tested-by: Alan Jenkins Signed-off-by: Jesse Barnes --- drivers/pci/pci-driver.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 4884c4840b3d..ab1d615425a8 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -669,7 +669,10 @@ static int pci_pm_poweroff(struct device *dev) if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_suspend(dev, PMSG_HIBERNATE); - if (drv && drv->pm && drv->pm->poweroff) { + if (!drv || !drv->pm) + return 0; + + if (drv->pm->poweroff) { error = drv->pm->poweroff(dev); suspend_report_result(drv->pm->poweroff, error); } -- cgit v1.2.1 From 48f67f54a53bb68619a63c3f38cf7f502ed74b1d Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 22 Jan 2009 23:38:31 +0100 Subject: PCI PM: Power up devices before restoring their state Devices that have MSI-X enabled before suspend to RAM or hibernation and that are in a low power state during resume will not be handled correctly by pci_restore_standard_config(). Namely, it first calls pci_restore_state() which calls pci_restore_msi_state(), which in turn executes __pci_restore_msix_state() that accesses the device's memory space to restore the contents of the MSI-X table. However, if the device is in a low power state at this point, it's memory space is not accessible. The easiest way to fix this potential problem is to make pci_restore_standard_config() call pci_restore_state() after it has put the device into the full power state, D0. Fortunately, all of this is done with interrupts off, so the change of ordering should not cause any trouble. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 17bd9325a245..f0aa3d533839 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1393,12 +1393,11 @@ int pci_restore_standard_config(struct pci_dev *dev) pci_power_t prev_state; int error; - pci_restore_state(dev); pci_update_current_state(dev, PCI_D0); prev_state = dev->current_state; if (prev_state == PCI_D0) - return 0; + goto Restore; error = pci_raw_set_power_state(dev, PCI_D0, false); if (error) @@ -1421,7 +1420,8 @@ int pci_restore_standard_config(struct pci_dev *dev) dev->current_state = PCI_D0; - return 0; + Restore: + return pci_restore_state(dev); } /** -- cgit v1.2.1 From 476e7faefc43f106a90b5c96166c59b75de19d30 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 22 Jan 2009 23:39:57 +0100 Subject: PCI PM: Do not wait for buses in B2 or B3 during resume pci_restore_standard_config() adds extra delay for PCI buses in low power states (B2 or B3), but this is only correct for buses in B2, because the buses in B3 are reset when they are put back into B0. Thus we should wait for such buses to settle after the reset, but it's not a good idea to wait that long (1.1 s) with interrupts off. On the other hand, we have never waited for buses in B2 and B3 during resume and it seems reasonable to go back to this well tested behaviour. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index f0aa3d533839..48807556b47a 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1403,19 +1403,19 @@ int pci_restore_standard_config(struct pci_dev *dev) if (error) return error; - if (pci_is_bridge(dev)) { - if (prev_state > PCI_D1) - mdelay(PCI_PM_BUS_WAIT); - } else { - switch(prev_state) { - case PCI_D3cold: - case PCI_D3hot: - mdelay(pci_pm_d3_delay); - break; - case PCI_D2: - udelay(PCI_PM_D2_DELAY); - break; - } + /* + * This assumes that we won't get a bus in B2 or B3 from the BIOS, but + * we've made this assumption forever and it appears to be universally + * satisfied. + */ + switch(prev_state) { + case PCI_D3cold: + case PCI_D3hot: + mdelay(pci_pm_d3_delay); + break; + case PCI_D2: + udelay(PCI_PM_D2_DELAY); + break; } dev->current_state = PCI_D0; -- cgit v1.2.1 From bffac3c593eba1f9da3efd0199e49ea6558a40ce Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Wed, 21 Jan 2009 19:19:19 -0500 Subject: PCI MSI: Fix undefined shift by 32 Add an msi_mask() function which returns the correct bitmask for the number of MSI interrupts you have. This fixes an undefined bug in msi_capability_init(). Signed-off-by: Matthew Wilcox Signed-off-by: Jesse Barnes --- drivers/pci/msi.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 896a15d70f5b..44f15ff70c1d 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -103,6 +103,16 @@ static void msix_set_enable(struct pci_dev *dev, int enable) } } +/* + * Essentially, this is ((1 << (1 << x)) - 1), but without the + * undefinedness of a << 32. + */ +static inline __attribute_const__ u32 msi_mask(unsigned x) +{ + static const u32 mask[] = { 1, 2, 4, 0xf, 0xff, 0xffff, 0xffffffff }; + return mask[x]; +} + static void msix_flush_writes(struct irq_desc *desc) { struct msi_desc *entry; @@ -407,8 +417,7 @@ static int msi_capability_init(struct pci_dev *dev) /* All MSIs are unmasked by default, Mask them all */ pci_read_config_dword(dev, base, &maskbits); - temp = (1 << multi_msi_capable(control)); - temp = ((temp - 1) & ~temp); + temp = msi_mask((control & PCI_MSI_FLAGS_QMASK) >> 1); maskbits |= temp; pci_write_config_dword(dev, base, maskbits); entry->msi_attrib.maskbits_mask = temp; -- cgit v1.2.1 From bf4162bcf82ebc3258d6bc0ddd6453132abde72d Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Tue, 25 Nov 2008 13:51:44 -0800 Subject: PCI hotplug: fakephp: Allocate PCI resources before adding the device For PCI devices, pci_bus_assign_resources() must be called to set up the pci_device->resource array before pci_bus_add_devices() can be called, else attempts to load drivers results in BAR collision errors where there are none. This is not done in fakephp, so devices can be "unplugged" but scanning the parent bus won't bring the devices back due to resource unallocation. Move the pci_bus_add_device-calling logic into pci_rescan_bus and preface it with a call to pci_bus_assign_resources so that we only have to (re)allocate resources once per bus where a new device is found. Signed-off-by: Darrick J. Wong Acked-by: Alex Chiang Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/fakephp.c | 42 ++++++++++++++++++++++++++---------------- 1 file changed, 26 insertions(+), 16 deletions(-) diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c index b0e7de9e536d..d8649e127298 100644 --- a/drivers/pci/hotplug/fakephp.c +++ b/drivers/pci/hotplug/fakephp.c @@ -195,13 +195,13 @@ static void remove_slot_worker(struct work_struct *work) * Tries hard not to re-enable already existing devices; * also handles scanning of subfunctions. */ -static void pci_rescan_slot(struct pci_dev *temp) +static int pci_rescan_slot(struct pci_dev *temp) { struct pci_bus *bus = temp->bus; struct pci_dev *dev; int func; - int retval; u8 hdr_type; + int count = 0; if (!pci_read_config_byte(temp, PCI_HEADER_TYPE, &hdr_type)) { temp->hdr_type = hdr_type & 0x7f; @@ -213,17 +213,12 @@ static void pci_rescan_slot(struct pci_dev *temp) dbg("New device on %s function %x:%x\n", bus->name, temp->devfn >> 3, temp->devfn & 7); - retval = pci_bus_add_device(dev); - if (retval) - dev_err(&dev->dev, "error adding " - "device, continuing.\n"); - else - add_slot(dev); + count++; } } /* multifunction device? */ if (!(hdr_type & 0x80)) - return; + return count; /* continue scanning for other functions */ for (func = 1, temp->devfn++; func < 8; func++, temp->devfn++) { @@ -239,16 +234,13 @@ static void pci_rescan_slot(struct pci_dev *temp) dbg("New device on %s function %x:%x\n", bus->name, temp->devfn >> 3, temp->devfn & 7); - retval = pci_bus_add_device(dev); - if (retval) - dev_err(&dev->dev, "error adding " - "device, continuing.\n"); - else - add_slot(dev); + count++; } } } } + + return count; } @@ -262,6 +254,8 @@ static void pci_rescan_bus(const struct pci_bus *bus) { unsigned int devfn; struct pci_dev *dev; + int retval; + int found = 0; dev = alloc_pci_dev(); if (!dev) return; @@ -270,7 +264,23 @@ static void pci_rescan_bus(const struct pci_bus *bus) dev->sysdata = bus->sysdata; for (devfn = 0; devfn < 0x100; devfn += 8) { dev->devfn = devfn; - pci_rescan_slot(dev); + found += pci_rescan_slot(dev); + } + + if (found) { + pci_bus_assign_resources(bus); + list_for_each_entry(dev, &bus->devices, bus_list) { + /* Skip already-added devices */ + if (dev->is_added) + continue; + retval = pci_bus_add_device(dev); + if (retval) + dev_err(&dev->dev, + "Error adding device, continuing\n"); + else + add_slot(dev); + } + pci_bus_add_devices(bus); } kfree(dev); } -- cgit v1.2.1 From 1cf3eb2ff6b0844c678f2f48d0053b9d12b7da67 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Tue, 27 Jan 2009 23:48:59 +0200 Subject: kmalloc: return NULL instead of link failure The SLAB kmalloc with a constant value isn't consistent with the other implementations because it bails out with __you_cannot_kmalloc_that_much rather than returning NULL and properly allowing the caller to fall back to vmalloc or take other action. This doesn't happen with a non-constant value or with SLOB or SLUB. Starting with 2.6.28, I've been seeing build failures on s390x. This is due to init_section_page_cgroup trying to allocate 2.5MB when the max size for a kmalloc on s390x is 2MB. It's failing because the value is constant. The workarounds at the call size are ugly and the caller shouldn't have to change behavior depending on what the backend of the API is. So, this patch eliminates the link failure and returns NULL like the other implementations. Signed-off-by: Jeff Mahoney Cc: Martin Schwidefsky Cc: Heiko Carstens Cc: Christoph Lameter Cc: Pekka Enberg Cc: Matt Mackall Cc: Nick Piggin Cc: [2.6.28.x] Signed-off-by: Andrew Morton Signed-off-by: Pekka Enberg --- include/linux/slab_def.h | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/include/linux/slab_def.h b/include/linux/slab_def.h index 39c3a5eb8ebe..6ca6a7b66d75 100644 --- a/include/linux/slab_def.h +++ b/include/linux/slab_def.h @@ -43,10 +43,7 @@ static inline void *kmalloc(size_t size, gfp_t flags) i++; #include #undef CACHE - { - extern void __you_cannot_kmalloc_that_much(void); - __you_cannot_kmalloc_that_much(); - } + return NULL; found: #ifdef CONFIG_ZONE_DMA if (flags & GFP_DMA) @@ -77,10 +74,7 @@ static inline void *kmalloc_node(size_t size, gfp_t flags, int node) i++; #include #undef CACHE - { - extern void __you_cannot_kmalloc_that_much(void); - __you_cannot_kmalloc_that_much(); - } + return NULL; found: #ifdef CONFIG_ZONE_DMA if (flags & GFP_DMA) -- cgit v1.2.1 From 71a082efc9fdc12068a3cee6cebb1330b00ebeee Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 27 Jan 2009 01:03:35 +0000 Subject: PCI hotplug: Change link order of pciehp & acpiphp Some hardware exposes PCIE slots in such a way that they can be claimed by either the acpiphp or pciehp driver. pciehp is the preferred driver if the firmware allows the OS to claim control via the _OSC method so should be loaded first - if it fails to bind (either due to a missing _OSC method or the firmware refusing to hand off control) then we can fall back to acpiphp or a vendor-specific driver. This patch simply changes the link order to ensure that pciehp will be initialised before acpiphp if both are statically built into the kernel. Signed-off-by: Matthew Garrett Acked-by: Randy Dunlap Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/Makefile | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/pci/hotplug/Makefile b/drivers/pci/hotplug/Makefile index e31fb91652ce..2aa117c8cd87 100644 --- a/drivers/pci/hotplug/Makefile +++ b/drivers/pci/hotplug/Makefile @@ -5,11 +5,15 @@ obj-$(CONFIG_HOTPLUG_PCI) += pci_hotplug.o obj-$(CONFIG_HOTPLUG_PCI_COMPAQ) += cpqphp.o obj-$(CONFIG_HOTPLUG_PCI_IBM) += ibmphp.o + +# pciehp should be linked before acpiphp in order to allow the native driver +# to attempt to bind first. We can then fall back to generic support. + +obj-$(CONFIG_HOTPLUG_PCI_PCIE) += pciehp.o obj-$(CONFIG_HOTPLUG_PCI_ACPI) += acpiphp.o obj-$(CONFIG_HOTPLUG_PCI_ACPI_IBM) += acpiphp_ibm.o obj-$(CONFIG_HOTPLUG_PCI_CPCI_ZT5550) += cpcihp_zt5550.o obj-$(CONFIG_HOTPLUG_PCI_CPCI_GENERIC) += cpcihp_generic.o -obj-$(CONFIG_HOTPLUG_PCI_PCIE) += pciehp.o obj-$(CONFIG_HOTPLUG_PCI_SHPC) += shpchp.o obj-$(CONFIG_HOTPLUG_PCI_RPA) += rpaphp.o obj-$(CONFIG_HOTPLUG_PCI_RPA_DLPAR) += rpadlpar_io.o -- cgit v1.2.1 From 15b2bee22a0390d951301b53e83df88d0350c499 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Tue, 27 Jan 2009 16:41:58 -0800 Subject: e1000: fix bug with shared interrupt during reset A nasty bug was found where an MTU change (or anything else that caused a reset) could race with the interrupt code. The interrupt code was entered by a shared interrupt during the MTU change. This change prevents the interrupt code from running while the driver is in the middle of its reset path. Signed-off-by: Jesse Brandeburg Signed-off-by: David S. Miller --- drivers/net/e1000/e1000_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 26474c92193f..c986978ce761 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -31,7 +31,7 @@ char e1000_driver_name[] = "e1000"; static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; -#define DRV_VERSION "7.3.20-k3-NAPI" +#define DRV_VERSION "7.3.21-k3-NAPI" const char e1000_driver_version[] = DRV_VERSION; static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation."; @@ -3712,7 +3712,7 @@ static irqreturn_t e1000_intr(int irq, void *data) struct e1000_hw *hw = &adapter->hw; u32 rctl, icr = er32(ICR); - if (unlikely(!icr)) + if (unlikely((!icr) || test_bit(__E1000_RESETTING, &adapter->flags))) return IRQ_NONE; /* Not our interrupt */ /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is -- cgit v1.2.1 From 94cd3e6cbebf85903b4d53ed2147bdb4c6e08625 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 27 Jan 2009 17:45:10 -0800 Subject: net: wrong test in inet_ehash_locks_alloc() In commit 9db66bdcc83749affe61c61eb8ff3cf08f42afec (net: convert TCP/DCCP ehash rwlocks to spinlocks), I forgot to change one occurrence of rwlock_t to spinlock_t I believe sizeof(raw_spinlock_t) might be > 0 on !CONFIG_SMP if CONFIG_DEBUG_SPINLOCK while sizeof(raw_rwlock_t) should be 0 in this case. Fortunatly, CONFIG_DEBUG_SPINLOCK adds fields to both spinlock_t and rwlock_t, but at this might change in the future (being able to debug spinlocks but not rwlocks for example), better to be safe. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/inet_hashtables.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/net/inet_hashtables.h b/include/net/inet_hashtables.h index f44bb5c77a70..d0a043153cc6 100644 --- a/include/net/inet_hashtables.h +++ b/include/net/inet_hashtables.h @@ -182,7 +182,7 @@ static inline int inet_ehash_locks_alloc(struct inet_hashinfo *hashinfo) size = 2048; if (nr_pcpus >= 32) size = 4096; - if (sizeof(rwlock_t) != 0) { + if (sizeof(spinlock_t) != 0) { #ifdef CONFIG_NUMA if (size * sizeof(spinlock_t) > PAGE_SIZE) hashinfo->ehash_locks = vmalloc(size * sizeof(spinlock_t)); -- cgit v1.2.1 From 6c06a478c9e59d1584a5dc1b2b3519bae5d6546a Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 27 Jan 2009 22:30:19 -0800 Subject: net: fix xfrm reverse flow lookup for icmp6 This patch fixes the xfrm reverse flow lookup for icmp6 so that icmp6 packets don't get lost over ipsec tunnels. Similar patch is in RHEL5 kernel for a quite long time and I do not see why it isn't in mainline. Signed-off-by: Jiri Pirko Acked-by: Herbert Xu Signed-off-by: David S. Miller --- net/ipv6/icmp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c index 4f433847d95f..36dff8807183 100644 --- a/net/ipv6/icmp.c +++ b/net/ipv6/icmp.c @@ -443,10 +443,10 @@ void icmpv6_send(struct sk_buff *skb, int type, int code, __u32 info, if (xfrm_decode_session_reverse(skb, &fl2, AF_INET6)) goto relookup_failed; - if (ip6_dst_lookup(sk, &dst2, &fl)) + if (ip6_dst_lookup(sk, &dst2, &fl2)) goto relookup_failed; - err = xfrm_lookup(net, &dst2, &fl, sk, XFRM_LOOKUP_ICMP); + err = xfrm_lookup(net, &dst2, &fl2, sk, XFRM_LOOKUP_ICMP); switch (err) { case 0: dst_release(dst); -- cgit v1.2.1 From 1d6e55f195128813f96458203a9fa14204f9251e Mon Sep 17 00:00:00 2001 From: Thomas Goff Date: Tue, 27 Jan 2009 22:39:59 -0800 Subject: IPv6: Fix multicast routing bugs. This patch addresses the IPv6 multicast routing issues described below. It was tested with XORP 1.4/1.5 as the IPv6 PIM-SM routing daemon against FreeBSD peers. net/ipv6/ip6_input.c: - Don't try to forward link-local multicast packets. - Don't reset skb2->dev before calling ip6_mr_input() so packets can be identified as coming from the PIM register vif properly. net/ipv6/ip6mr.c: - Fix incoming PIM register messages processing: * The IPv6 pseudo-header should be included when checksumming PIM messages (RFC 4601 section 4.9; RFC 3973 section 4.7.1). * Packets decapsulated from PIM register messages should have skb->protocol ETH_P_IPV6. - Enable/disable IPv6 multicast forwarding on the corresponding interface when a routing daemon adds/removes a multicast virtual interface. - Remove incorrect skb_pull() to fix userspace signaling. - Enable/disable global IPv6 multicast forwarding when an IPv6 multicast routing socket is opened/closed. net/ipv6/route.c: - Don't use strict routing logic for packets decapsulated from PIM register messages (similar to disabling rp_filter for the IPv4 case). Signed-off-by: Thomas Goff Reviewed-by: Fred Templin Signed-off-by: David S. Miller --- net/ipv6/ip6_input.c | 2 +- net/ipv6/ip6mr.c | 23 ++++++++++++++++++----- net/ipv6/route.c | 2 +- 3 files changed, 20 insertions(+), 7 deletions(-) diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c index 936f48946e20..f171e8dbac91 100644 --- a/net/ipv6/ip6_input.c +++ b/net/ipv6/ip6_input.c @@ -255,6 +255,7 @@ int ip6_mc_input(struct sk_buff *skb) * IPv6 multicast router mode is now supported ;) */ if (dev_net(skb->dev)->ipv6.devconf_all->mc_forwarding && + !(ipv6_addr_type(&hdr->daddr) & IPV6_ADDR_LINKLOCAL) && likely(!(IP6CB(skb)->flags & IP6SKB_FORWARDED))) { /* * Okay, we try to forward - split and duplicate @@ -316,7 +317,6 @@ int ip6_mc_input(struct sk_buff *skb) } if (skb2) { - skb2->dev = skb2->dst->dev; ip6_mr_input(skb2); } } diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c index 3c51b2d827f4..d19a84b79503 100644 --- a/net/ipv6/ip6mr.c +++ b/net/ipv6/ip6mr.c @@ -365,7 +365,9 @@ static int pim6_rcv(struct sk_buff *skb) pim = (struct pimreghdr *)skb_transport_header(skb); if (pim->type != ((PIM_VERSION << 4) | PIM_REGISTER) || (pim->flags & PIM_NULL_REGISTER) || - (ip_compute_csum((void *)pim, sizeof(*pim)) != 0 && + (csum_ipv6_magic(&ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr, + sizeof(*pim), IPPROTO_PIM, + csum_partial((void *)pim, sizeof(*pim), 0)) && csum_fold(skb_checksum(skb, 0, skb->len, 0)))) goto drop; @@ -392,7 +394,7 @@ static int pim6_rcv(struct sk_buff *skb) skb_pull(skb, (u8 *)encap - skb->data); skb_reset_network_header(skb); skb->dev = reg_dev; - skb->protocol = htons(ETH_P_IP); + skb->protocol = htons(ETH_P_IPV6); skb->ip_summed = 0; skb->pkt_type = PACKET_HOST; dst_release(skb->dst); @@ -481,6 +483,7 @@ static int mif6_delete(struct net *net, int vifi) { struct mif_device *v; struct net_device *dev; + struct inet6_dev *in6_dev; if (vifi < 0 || vifi >= net->ipv6.maxvif) return -EADDRNOTAVAIL; @@ -513,6 +516,10 @@ static int mif6_delete(struct net *net, int vifi) dev_set_allmulti(dev, -1); + in6_dev = __in6_dev_get(dev); + if (in6_dev) + in6_dev->cnf.mc_forwarding--; + if (v->flags & MIFF_REGISTER) unregister_netdevice(dev); @@ -622,6 +629,7 @@ static int mif6_add(struct net *net, struct mif6ctl *vifc, int mrtsock) int vifi = vifc->mif6c_mifi; struct mif_device *v = &net->ipv6.vif6_table[vifi]; struct net_device *dev; + struct inet6_dev *in6_dev; int err; /* Is vif busy ? */ @@ -662,6 +670,10 @@ static int mif6_add(struct net *net, struct mif6ctl *vifc, int mrtsock) return -EINVAL; } + in6_dev = __in6_dev_get(dev); + if (in6_dev) + in6_dev->cnf.mc_forwarding++; + /* * Fill in the VIF structures */ @@ -838,8 +850,6 @@ static int ip6mr_cache_report(struct net *net, struct sk_buff *pkt, mifi_t mifi, skb->dst = dst_clone(pkt->dst); skb->ip_summed = CHECKSUM_UNNECESSARY; - - skb_pull(skb, sizeof(struct ipv6hdr)); } if (net->ipv6.mroute6_sk == NULL) { @@ -1222,8 +1232,10 @@ static int ip6mr_sk_init(struct sock *sk) rtnl_lock(); write_lock_bh(&mrt_lock); - if (likely(net->ipv6.mroute6_sk == NULL)) + if (likely(net->ipv6.mroute6_sk == NULL)) { net->ipv6.mroute6_sk = sk; + net->ipv6.devconf_all->mc_forwarding++; + } else err = -EADDRINUSE; write_unlock_bh(&mrt_lock); @@ -1242,6 +1254,7 @@ int ip6mr_sk_done(struct sock *sk) if (sk == net->ipv6.mroute6_sk) { write_lock_bh(&mrt_lock); net->ipv6.mroute6_sk = NULL; + net->ipv6.devconf_all->mc_forwarding--; write_unlock_bh(&mrt_lock); mroute_clean_tables(net); diff --git a/net/ipv6/route.c b/net/ipv6/route.c index c4a59824ac2c..9c574235c905 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -794,7 +794,7 @@ void ip6_route_input(struct sk_buff *skb) .proto = iph->nexthdr, }; - if (rt6_need_strict(&iph->daddr)) + if (rt6_need_strict(&iph->daddr) && skb->dev->type != ARPHRD_PIMREG) flags |= RT6_LOOKUP_F_IFACE; skb->dst = fib6_rule_lookup(net, &fl, flags, ip6_pol_route_input); -- cgit v1.2.1 From a4e6db07984529847c6ad8bc616485e721dcb809 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 27 Jan 2009 22:41:03 -0800 Subject: ipv6: Make mc_forwarding sysctl read-only. The kernel manages this value internally, as necessary, as VIFs are added/removed and as multicast routers are registered and deregistered. Signed-off-by: David S. Miller --- net/ipv6/addrconf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index e92ad8455c63..f9afb452249c 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -4250,7 +4250,7 @@ static struct addrconf_sysctl_table .procname = "mc_forwarding", .data = &ipv6_devconf.mc_forwarding, .maxlen = sizeof(int), - .mode = 0644, + .mode = 0444, .proc_handler = proc_dointvec, }, #endif -- cgit v1.2.1 From 2a88464ceb1bda2571f88902fd8068a6168e3f7b Mon Sep 17 00:00:00 2001 From: Luke Yelavich Date: Wed, 28 Jan 2009 15:58:38 +1100 Subject: ALSA: hda - add another MacBook Pro 4, 1 subsystem ID Add another MacBook Pro 4,1 SSID (106b:3800). It seems that latter revisions, (at least mine), have different IDs to earlier revisions. Signed-off-by: Luke Yelavich Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 5d249a547fbf..7884a4e07061 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7018,6 +7018,7 @@ static int patch_alc882(struct hda_codec *codec) case 0x106b00a4: /* MacbookPro4,1 */ case 0x106b2c00: /* Macbook Pro rev3 */ case 0x106b3600: /* Macbook 3.1 */ + case 0x106b3800: /* MacbookPro4,1 - latter revision */ board_config = ALC885_MBP3; break; default: -- cgit v1.2.1 From 3718909448116bf4411445468c58acc946379f92 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Tue, 27 Jan 2009 18:59:46 -0800 Subject: slub: fix per cpu kmem_cache_cpu array memory leak The per cpu array of kmem_cache_cpu structures accomodates NR_KMEM_CACHE_CPU such structs. When this array overflows and a struct is allocated by kmalloc(), it may have an address at the upper bound of this array. If this happens, it does not get freed and the per cpu kmem_cache_cpu_free pointer will be out of bounds after kmem_cache_destroy() or cpu offlining. Cc: Christoph Lameter Signed-off-by: David Rientjes Signed-off-by: Pekka Enberg --- mm/slub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/slub.c b/mm/slub.c index 6392ae5cc6b1..bdc9abb08a23 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -1996,7 +1996,7 @@ static struct kmem_cache_cpu *alloc_kmem_cache_cpu(struct kmem_cache *s, static void free_kmem_cache_cpu(struct kmem_cache_cpu *c, int cpu) { if (c < per_cpu(kmem_cache_cpu, cpu) || - c > per_cpu(kmem_cache_cpu, cpu) + NR_KMEM_CACHE_CPU) { + c >= per_cpu(kmem_cache_cpu, cpu) + NR_KMEM_CACHE_CPU) { kfree(c); return; } -- cgit v1.2.1 From 82d4b90debaa7ab3590335c1b641eb3d2ebb164e Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Mon, 19 Jan 2009 19:19:55 +0100 Subject: ieee1394: support for speeds greater than S800 The hard-wired configuration of the top speed (until now S800) was unnecessary, remove it. If the local link layer controller supports S1600 or S3200, we now assume this speed for all present 1394b PHYs (except if they are behind 1394a repeaters) until nodemgr figured out the actual speed while fetching the config ROM. Signed-off-by: Stefan Richter --- drivers/ieee1394/ieee1394.h | 4 +--- drivers/ieee1394/ieee1394_core.c | 16 ++++++++-------- 2 files changed, 9 insertions(+), 11 deletions(-) diff --git a/drivers/ieee1394/ieee1394.h b/drivers/ieee1394/ieee1394.h index e0ae0d3d747f..af320e2c5079 100644 --- a/drivers/ieee1394/ieee1394.h +++ b/drivers/ieee1394/ieee1394.h @@ -54,9 +54,7 @@ #define IEEE1394_SPEED_800 0x03 #define IEEE1394_SPEED_1600 0x04 #define IEEE1394_SPEED_3200 0x05 - -/* The current highest tested speed supported by the subsystem */ -#define IEEE1394_SPEED_MAX IEEE1394_SPEED_800 +#define IEEE1394_SPEED_MAX IEEE1394_SPEED_3200 /* Maps speed values above to a string representation */ extern const char *hpsb_speedto_str[]; diff --git a/drivers/ieee1394/ieee1394_core.c b/drivers/ieee1394/ieee1394_core.c index dcdb71a7718d..2beb8d94f7bd 100644 --- a/drivers/ieee1394/ieee1394_core.c +++ b/drivers/ieee1394/ieee1394_core.c @@ -338,6 +338,7 @@ static void build_speed_map(struct hpsb_host *host, int nodecount) u8 cldcnt[nodecount]; u8 *map = host->speed_map; u8 *speedcap = host->speed; + u8 local_link_speed = host->csr.lnk_spd; struct selfid *sid; struct ext_selfid *esid; int i, j, n; @@ -373,8 +374,8 @@ static void build_speed_map(struct hpsb_host *host, int nodecount) if (sid->port2 == SELFID_PORT_CHILD) cldcnt[n]++; speedcap[n] = sid->speed; - if (speedcap[n] > host->csr.lnk_spd) - speedcap[n] = host->csr.lnk_spd; + if (speedcap[n] > local_link_speed) + speedcap[n] = local_link_speed; n--; } } @@ -407,12 +408,11 @@ static void build_speed_map(struct hpsb_host *host, int nodecount) } } -#if SELFID_SPEED_UNKNOWN != IEEE1394_SPEED_MAX - /* assume maximum speed for 1394b PHYs, nodemgr will correct it */ - for (n = 0; n < nodecount; n++) - if (speedcap[n] == SELFID_SPEED_UNKNOWN) - speedcap[n] = IEEE1394_SPEED_MAX; -#endif + /* assume a maximum speed for 1394b PHYs, nodemgr will correct it */ + if (local_link_speed > SELFID_SPEED_UNKNOWN) + for (i = 0; i < nodecount; i++) + if (speedcap[i] == SELFID_SPEED_UNKNOWN) + speedcap[i] = local_link_speed; } -- cgit v1.2.1 From 4106ceff15495a7df1617e78bbf3e852fe6601c9 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Mon, 19 Jan 2009 19:20:31 +0100 Subject: ieee1394: sbp2: update a help string Signed-off-by: Stefan Richter --- drivers/ieee1394/sbp2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index ab1034ccb7fb..3f8082d31049 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -115,8 +115,8 @@ */ static int sbp2_max_speed = IEEE1394_SPEED_MAX; module_param_named(max_speed, sbp2_max_speed, int, 0644); -MODULE_PARM_DESC(max_speed, "Force max speed " - "(3 = 800Mb/s, 2 = 400Mb/s, 1 = 200Mb/s, 0 = 100Mb/s)"); +MODULE_PARM_DESC(max_speed, "Limit data transfer speed (5 <= 3200, " + "4 <= 1600, 3 <= 800, 2 <= 400, 1 <= 200, 0 = 100 Mb/s)"); /* * Set serialize_io to 0 or N to use dynamically appended lists of command ORBs. -- cgit v1.2.1 From d3e3e970e3722c51e3fd3b042b6065d4bfaf6f81 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 24 Jan 2009 19:41:46 +0100 Subject: ieee1394: sbp2: fix payload limit at S1600 and S3200 1394-2008 clause 16.3.4.1 (1394b-2002 clause 16.3.1.1) defines tighter limits than 1394-2008 clause 6.2.2.3 (1394a-2000 clause 6.2.2.3). Our previously too large limit doesn't matter though if the controller reports its max_receive correctly. Signed-off-by: Stefan Richter --- drivers/ieee1394/sbp2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index 3f8082d31049..a2984a091aea 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -256,7 +256,7 @@ static int sbp2_set_busy_timeout(struct sbp2_lu *); static int sbp2_max_speed_and_size(struct sbp2_lu *); -static const u8 sbp2_speedto_max_payload[] = { 0x7, 0x8, 0x9, 0xA, 0xB, 0xC }; +static const u8 sbp2_speedto_max_payload[] = { 0x7, 0x8, 0x9, 0xa, 0xa, 0xa }; static DEFINE_RWLOCK(sbp2_hi_logical_units_lock); -- cgit v1.2.1 From c1fbdd78517a9323ea5f5767c8ceb10aabc40fc2 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 24 Jan 2009 19:41:46 +0100 Subject: ieee1394: sbp2: don't assume zero model_id or firmware_revision if there is none This makes sbp2 behave more like firewire-sbp2 which reports 0xff000000 as immediate value if there are no unit directory entries for model_id or firmware_revision. It does not reduce matches with the currently existing quirks table; the only zero entry there is for a device which actually does have a zero model_id. It only changes how model_id and firmware_revision are logged if they are missing. Other functionally unrelated changes: The model_id member of quirks list entries is renamed to model; the value (but not the effect) of SBP2_ROM_VALUE_WILDCARD is changed. Now this part of the source is identical with firewire-sbp2 for easier maintenance. Signed-off-by: Stefan Richter --- drivers/ieee1394/sbp2.c | 38 ++++++++++++++++++++------------------ 1 file changed, 20 insertions(+), 18 deletions(-) diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index a2984a091aea..fb8f9f4430ad 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -347,8 +347,8 @@ static struct scsi_host_template sbp2_shost_template = { .sdev_attrs = sbp2_sysfs_sdev_attrs, }; -/* for match-all entries in sbp2_workarounds_table */ -#define SBP2_ROM_VALUE_WILDCARD 0x1000000 +#define SBP2_ROM_VALUE_WILDCARD ~0 /* match all */ +#define SBP2_ROM_VALUE_MISSING 0xff000000 /* not present in the unit dir. */ /* * List of devices with known bugs. @@ -359,60 +359,60 @@ static struct scsi_host_template sbp2_shost_template = { */ static const struct { u32 firmware_revision; - u32 model_id; + u32 model; unsigned workarounds; } sbp2_workarounds_table[] = { /* DViCO Momobay CX-1 with TSB42AA9 bridge */ { .firmware_revision = 0x002800, - .model_id = 0x001010, + .model = 0x001010, .workarounds = SBP2_WORKAROUND_INQUIRY_36 | SBP2_WORKAROUND_MODE_SENSE_8 | SBP2_WORKAROUND_POWER_CONDITION, }, /* DViCO Momobay FX-3A with TSB42AA9A bridge */ { .firmware_revision = 0x002800, - .model_id = 0x000000, + .model = 0x000000, .workarounds = SBP2_WORKAROUND_DELAY_INQUIRY | SBP2_WORKAROUND_POWER_CONDITION, }, /* Initio bridges, actually only needed for some older ones */ { .firmware_revision = 0x000200, - .model_id = SBP2_ROM_VALUE_WILDCARD, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_INQUIRY_36, }, /* PL-3507 bridge with Prolific firmware */ { .firmware_revision = 0x012800, - .model_id = SBP2_ROM_VALUE_WILDCARD, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_POWER_CONDITION, }, /* Symbios bridge */ { .firmware_revision = 0xa0b800, - .model_id = SBP2_ROM_VALUE_WILDCARD, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, }, /* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ { .firmware_revision = 0x002600, - .model_id = SBP2_ROM_VALUE_WILDCARD, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, }, /* iPod 4th generation */ { .firmware_revision = 0x0a2700, - .model_id = 0x000021, + .model = 0x000021, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, }, /* iPod mini */ { .firmware_revision = 0x0a2700, - .model_id = 0x000022, + .model = 0x000022, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, }, /* iPod mini */ { .firmware_revision = 0x0a2700, - .model_id = 0x000023, + .model = 0x000023, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, }, /* iPod Photo */ { .firmware_revision = 0x0a2700, - .model_id = 0x00007e, + .model = 0x00007e, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, } }; @@ -1341,13 +1341,15 @@ static void sbp2_parse_unit_directory(struct sbp2_lu *lu, struct csr1212_keyval *kv; struct csr1212_dentry *dentry; u64 management_agent_addr; - u32 unit_characteristics, firmware_revision; + u32 unit_characteristics, firmware_revision, model; unsigned workarounds; int i; management_agent_addr = 0; unit_characteristics = 0; - firmware_revision = 0; + firmware_revision = SBP2_ROM_VALUE_MISSING; + model = ud->flags & UNIT_DIRECTORY_MODEL_ID ? + ud->model_id : SBP2_ROM_VALUE_MISSING; csr1212_for_each_dir_entry(ud->ne->csr, kv, ud->ud_kv, dentry) { switch (kv->key.id) { @@ -1388,9 +1390,9 @@ static void sbp2_parse_unit_directory(struct sbp2_lu *lu, sbp2_workarounds_table[i].firmware_revision != (firmware_revision & 0xffff00)) continue; - if (sbp2_workarounds_table[i].model_id != + if (sbp2_workarounds_table[i].model != SBP2_ROM_VALUE_WILDCARD && - sbp2_workarounds_table[i].model_id != ud->model_id) + sbp2_workarounds_table[i].model != model) continue; workarounds |= sbp2_workarounds_table[i].workarounds; break; @@ -1403,7 +1405,7 @@ static void sbp2_parse_unit_directory(struct sbp2_lu *lu, NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid), workarounds, firmware_revision, ud->vendor_id ? ud->vendor_id : ud->ne->vendor_id, - ud->model_id); + model); /* We would need one SCSI host template for each target to adjust * max_sectors on the fly, therefore warn only. */ -- cgit v1.2.1 From a08e100aece16e33a45b82924ad85f4066c4ed1c Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 24 Jan 2009 19:41:46 +0100 Subject: firewire: sbp2: fix payload limit at S1600 and S3200 1394-2008 clause 16.3.4.1 (1394b-2002 clause 16.3.1.1) defines tighter limits than 1394-2008 clause 6.2.2.3 (1394a-2000 clause 6.2.2.3). Our previously too large limit doesn't matter though if the controller reports its max_receive correctly. Signed-off-by: Stefan Richter --- drivers/firewire/fw-sbp2.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index e88d5067448c..ac8038431585 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -168,6 +168,7 @@ struct sbp2_target { int address_high; unsigned int workarounds; unsigned int mgt_orb_timeout; + unsigned int max_payload; int dont_block; /* counter for each logical unit */ int blocked; /* ditto */ @@ -1156,6 +1157,15 @@ static int sbp2_probe(struct device *dev) sbp2_init_workarounds(tgt, model, firmware_revision); + /* + * At S100 we can do 512 bytes per packet, at S200 1024 bytes, + * and so on up to 4096 bytes. The SBP-2 max_payload field + * specifies the max payload size as 2 ^ (max_payload + 2), so + * if we set this to max_speed + 7, we get the right value. + */ + tgt->max_payload = min(device->max_speed + 7, 10U); + tgt->max_payload = min(tgt->max_payload, device->card->max_receive - 1); + /* Do the login in a workqueue so we can easily reschedule retries. */ list_for_each_entry(lu, &tgt->lu_list, link) sbp2_queue_work(lu, DIV_ROUND_UP(HZ, 5)); @@ -1434,7 +1444,6 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done) struct sbp2_logical_unit *lu = cmd->device->hostdata; struct fw_device *device = fw_device(lu->tgt->unit->device.parent); struct sbp2_command_orb *orb; - unsigned int max_payload; int generation, retval = SCSI_MLQUEUE_HOST_BUSY; /* @@ -1462,17 +1471,9 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done) orb->done = done; orb->cmd = cmd; - orb->request.next.high = cpu_to_be32(SBP2_ORB_NULL); - /* - * At speed 100 we can do 512 bytes per packet, at speed 200, - * 1024 bytes per packet etc. The SBP-2 max_payload field - * specifies the max payload size as 2 ^ (max_payload + 2), so - * if we set this to max_speed + 7, we get the right value. - */ - max_payload = min(device->max_speed + 7, - device->card->max_receive - 1); + orb->request.next.high = cpu_to_be32(SBP2_ORB_NULL); orb->request.misc = cpu_to_be32( - COMMAND_ORB_MAX_PAYLOAD(max_payload) | + COMMAND_ORB_MAX_PAYLOAD(lu->tgt->max_payload) | COMMAND_ORB_SPEED(device->max_speed) | COMMAND_ORB_NOTIFY); -- cgit v1.2.1 From f746072abc12d0e10ecd7847f1846157fde15987 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 24 Jan 2009 19:41:46 +0100 Subject: firewire: sbp2: define some magic numbers as macros Signed-off-by: Stefan Richter --- drivers/firewire/fw-sbp2.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index ac8038431585..5739caaaec7b 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -311,14 +311,16 @@ struct sbp2_command_orb { dma_addr_t page_table_bus; }; +#define SBP2_ROM_VALUE_WILDCARD ~0 /* match all */ +#define SBP2_ROM_VALUE_MISSING 0xff000000 /* not present in the unit dir. */ + /* * List of devices with known bugs. * * The firmware_revision field, masked with 0xffff00, is the best * indicator for the type of bridge chip of a device. It yields a few * false positives but this did not break correctly behaving devices - * so far. We use ~0 as a wildcard, since the 24 bit values we get - * from the config rom can never match that. + * so far. */ static const struct { u32 firmware_revision; @@ -340,22 +342,22 @@ static const struct { }, /* Initio bridges, actually only needed for some older ones */ { .firmware_revision = 0x000200, - .model = ~0, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_INQUIRY_36, }, /* PL-3507 bridge with Prolific firmware */ { .firmware_revision = 0x012800, - .model = ~0, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_POWER_CONDITION, }, /* Symbios bridge */ { .firmware_revision = 0xa0b800, - .model = ~0, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, }, /* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ { .firmware_revision = 0x002600, - .model = ~0, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, }, @@ -1093,7 +1095,7 @@ static void sbp2_init_workarounds(struct sbp2_target *tgt, u32 model, continue; if (sbp2_workarounds_table[i].model != model && - sbp2_workarounds_table[i].model != ~0) + sbp2_workarounds_table[i].model != SBP2_ROM_VALUE_WILDCARD) continue; w |= sbp2_workarounds_table[i].workarounds; @@ -1143,14 +1145,13 @@ static int sbp2_probe(struct device *dev) fw_device_get(device); fw_unit_get(unit); - /* Initialize to values that won't match anything in our table. */ - firmware_revision = 0xff000000; - model = 0xff000000; - /* implicit directory ID */ tgt->directory_id = ((unit->directory - device->config_rom) * 4 + CSR_CONFIG_ROM) & 0xffffff; + firmware_revision = SBP2_ROM_VALUE_MISSING; + model = SBP2_ROM_VALUE_MISSING; + if (sbp2_scan_unit_dir(tgt, unit->directory, &model, &firmware_revision) < 0) goto fail_tgt_put; -- cgit v1.2.1 From 5e2125677fd72d36396cc537466e07ffcbbd4b2b Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Wed, 28 Jan 2009 01:03:34 +0100 Subject: firewire: sbp2: fix DMA mapping leak on the failure path Reported-by: FUJITA Tomonori who also provided a first version of the fix. Signed-off-by: Stefan Richter --- drivers/firewire/fw-sbp2.c | 27 +++++++++++++++++---------- 1 file changed, 17 insertions(+), 10 deletions(-) diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index 5739caaaec7b..6635925a3758 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -1284,6 +1284,19 @@ static struct fw_driver sbp2_driver = { .id_table = sbp2_id_table, }; +static void sbp2_unmap_scatterlist(struct device *card_device, + struct sbp2_command_orb *orb) +{ + if (scsi_sg_count(orb->cmd)) + dma_unmap_sg(card_device, scsi_sglist(orb->cmd), + scsi_sg_count(orb->cmd), + orb->cmd->sc_data_direction); + + if (orb->request.misc & cpu_to_be32(COMMAND_ORB_PAGE_TABLE_PRESENT)) + dma_unmap_single(card_device, orb->page_table_bus, + sizeof(orb->page_table), DMA_TO_DEVICE); +} + static unsigned int sbp2_status_to_sense_data(u8 *sbp2_status, u8 *sense_data) { @@ -1363,15 +1376,7 @@ complete_command_orb(struct sbp2_orb *base_orb, struct sbp2_status *status) dma_unmap_single(device->card->device, orb->base.request_bus, sizeof(orb->request), DMA_TO_DEVICE); - - if (scsi_sg_count(orb->cmd) > 0) - dma_unmap_sg(device->card->device, scsi_sglist(orb->cmd), - scsi_sg_count(orb->cmd), - orb->cmd->sc_data_direction); - - if (orb->page_table_bus != 0) - dma_unmap_single(device->card->device, orb->page_table_bus, - sizeof(orb->page_table), DMA_TO_DEVICE); + sbp2_unmap_scatterlist(device->card->device, orb); orb->cmd->result = result; orb->done(orb->cmd); @@ -1493,8 +1498,10 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done) orb->base.request_bus = dma_map_single(device->card->device, &orb->request, sizeof(orb->request), DMA_TO_DEVICE); - if (dma_mapping_error(device->card->device, orb->base.request_bus)) + if (dma_mapping_error(device->card->device, orb->base.request_bus)) { + sbp2_unmap_scatterlist(device->card->device, orb); goto out; + } sbp2_send_orb(&orb->base, lu, lu->tgt->node_id, generation, lu->command_block_agent_address + SBP2_ORB_POINTER); -- cgit v1.2.1 From c69a1f09430c7a62b87af89383998256fcf07685 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 16 Jan 2009 17:59:15 -0800 Subject: Staging: comedi: fix Kbuild comedi doesn't like being built into the kernel right now, so force it to be a module. Reported-by: Kamalesh Babulal Reported-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig index b501bfb9c754..b47ca1e7e383 100644 --- a/drivers/staging/comedi/Kconfig +++ b/drivers/staging/comedi/Kconfig @@ -1,6 +1,7 @@ config COMEDI tristate "Data Acquision support (comedi)" default N + depends on m ---help--- Enable support a wide range of data acquision devices for Linux. -- cgit v1.2.1 From 7c5151fbf134e082bc7f2c0ed02684ed12578b3b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 16 Jan 2009 18:01:57 -0800 Subject: Staging: meilhaus: fix Kbuild The Meilhaus drivers do not like being built into the kernel right now, so force them to be a module. Reported-by: Kamalesh Babulal Reported-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/staging/meilhaus/Kconfig | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/staging/meilhaus/Kconfig b/drivers/staging/meilhaus/Kconfig index 6def83fa2c96..923af22a4686 100644 --- a/drivers/staging/meilhaus/Kconfig +++ b/drivers/staging/meilhaus/Kconfig @@ -4,6 +4,7 @@ menuconfig MEILHAUS tristate "Meilhaus support" + depends on m ---help--- If you have a Meilhaus card, say Y (or M) here. @@ -18,7 +19,7 @@ if MEILHAUS config ME0600 tristate "Meilhaus ME-600 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-600 family of boards that do data collection and multipurpose I/O. @@ -29,7 +30,7 @@ config ME0600 config ME0900 tristate "Meilhaus ME-900 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-900 family of boards that do data collection and multipurpose I/O. @@ -40,7 +41,7 @@ config ME0900 config ME1000 tristate "Meilhaus ME-1000 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-1000 family of boards that do data collection and multipurpose I/O. @@ -51,7 +52,7 @@ config ME1000 config ME1400 tristate "Meilhaus ME-1400 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-1400 family of boards that do data collection and multipurpose I/O. @@ -62,7 +63,7 @@ config ME1400 config ME1600 tristate "Meilhaus ME-1600 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-1600 family of boards that do data collection and multipurpose I/O. @@ -73,7 +74,7 @@ config ME1600 config ME4600 tristate "Meilhaus ME-4600 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-4600 family of boards that do data collection and multipurpose I/O. @@ -84,7 +85,7 @@ config ME4600 config ME6000 tristate "Meilhaus ME-6000 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-6000 family of boards that do data collection and multipurpose I/O. @@ -95,7 +96,7 @@ config ME6000 config ME8100 tristate "Meilhaus ME-8100 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-8100 family of boards that do data collection and multipurpose I/O. @@ -106,7 +107,7 @@ config ME8100 config ME8200 tristate "Meilhaus ME-8200 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-8200 family of boards that do data collection and multipurpose I/O. @@ -117,7 +118,7 @@ config ME8200 config MEDUMMY tristate "Meilhaus dummy driver" default n - depends on PCI + depends on PCI && m help This provides a dummy driver for the Meilhaus driver package -- cgit v1.2.1 From c171ac36b74f6c90bc7a03c309136ba175314b6d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Arve=20Hj=C3=B8nnev=C3=A5g?= Date: Thu, 8 Jan 2009 15:28:50 -0800 Subject: Staging: android: binder: fix arm build errors Reported-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/binder.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c index 6a4ceacb33f5..ab014bc96831 100644 --- a/drivers/staging/android/binder.c +++ b/drivers/staging/android/binder.c @@ -2649,14 +2649,14 @@ static void binder_vma_open(struct vm_area_struct *vma) { struct binder_proc *proc = vma->vm_private_data; if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE) - printk(KERN_INFO "binder: %d open vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot); + printk(KERN_INFO "binder: %d open vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, pgprot_val(vma->vm_page_prot)); dump_stack(); } static void binder_vma_close(struct vm_area_struct *vma) { struct binder_proc *proc = vma->vm_private_data; if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE) - printk(KERN_INFO "binder: %d close vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot); + printk(KERN_INFO "binder: %d close vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, pgprot_val(vma->vm_page_prot)); proc->vma = NULL; } @@ -2677,7 +2677,7 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma) vma->vm_end = vma->vm_start + SZ_4M; if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE) - printk(KERN_INFO "binder_mmap: %d %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot); + printk(KERN_INFO "binder_mmap: %d %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, pgprot_val(vma->vm_page_prot)); if (vma->vm_flags & FORBIDDEN_MMAP_FLAGS) { ret = -EPERM; -- cgit v1.2.1 From 2d0db6bf5010c26beb1ccbd4ee50991fd2c05d90 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Arve=20Hj=C3=B8nnev=C3=A5g?= Date: Thu, 8 Jan 2009 16:48:46 -0800 Subject: Staging: android: timed_gpio: Fix build to build on kernels after 2.6.25. Reported-by: Randy Dunlap Cc: Mike Lockwood Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/timed_gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/android/timed_gpio.c b/drivers/staging/android/timed_gpio.c index bea68c9fc942..b41b20e34628 100644 --- a/drivers/staging/android/timed_gpio.c +++ b/drivers/staging/android/timed_gpio.c @@ -18,7 +18,7 @@ #include #include #include -#include +#include #include "timed_gpio.h" -- cgit v1.2.1 From 07960058f0ce77ddc3027d3e45a5de1fb977334f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 28 Jan 2009 15:42:43 -0800 Subject: Staging: android: fix build error on 64bit boxes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ktime_t isn't ment to directly access on all arches, so use the proper conversion functions instead to figure out what time is remaining. Reported-by: Randy Dunlap Cc: Arve Hjønnevåg Cc: Mike Lockwood Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/timed_gpio.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/staging/android/timed_gpio.c b/drivers/staging/android/timed_gpio.c index b41b20e34628..903270cbbe02 100644 --- a/drivers/staging/android/timed_gpio.c +++ b/drivers/staging/android/timed_gpio.c @@ -49,7 +49,8 @@ static ssize_t gpio_enable_show(struct device *dev, struct device_attribute *att if (hrtimer_active(&gpio_data->timer)) { ktime_t r = hrtimer_get_remaining(&gpio_data->timer); - remaining = r.tv.sec * 1000 + r.tv.nsec / 1000000; + struct timeval t = ktime_to_timeval(r); + remaining = t.tv_sec * 1000 + t.tv_usec; } else remaining = 0; -- cgit v1.2.1 From 191805ac41a63929003faa33365027d3fb924d71 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Arve=20Hj=C3=B8nnev=C3=A5g?= Date: Wed, 14 Jan 2009 16:54:16 -0800 Subject: Staging: android: Add lowmemorykiller documentation. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Arve Hjønnevåg Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/lowmemorykiller.txt | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 drivers/staging/android/lowmemorykiller.txt diff --git a/drivers/staging/android/lowmemorykiller.txt b/drivers/staging/android/lowmemorykiller.txt new file mode 100644 index 000000000000..bd5c0c028968 --- /dev/null +++ b/drivers/staging/android/lowmemorykiller.txt @@ -0,0 +1,16 @@ +The lowmemorykiller driver lets user-space specify a set of memory thresholds +where processes with a range of oom_adj values will get killed. Specify the +minimum oom_adj values in /sys/module/lowmemorykiller/parameters/adj and the +number of free pages in /sys/module/lowmemorykiller/parameters/minfree. Both +files take a comma separated list of numbers in ascending order. + +For example, write "0,8" to /sys/module/lowmemorykiller/parameters/adj and +"1024,4096" to /sys/module/lowmemorykiller/parameters/minfree to kill processes +with a oom_adj value of 8 or higher when the free memory drops below 4096 pages +and kill processes with a oom_adj value of 0 or higher when the free memory +drops below 1024 pages. + +The driver considers memory used for caches to be free, but if a large +percentage of the cached memory is locked this can be very inaccurate +and processes may not get killed until the normal oom killer is triggered. + -- cgit v1.2.1 From 1176e83aff6f15b6ae4d1b53c16124884ad29363 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 18 Jan 2009 18:17:20 +0100 Subject: Staging: android: task_get_unused_fd_flags: fix the wrong usage of tsk->signal MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Compile tested. task_struct->signal is not protected by RCU, the code is bogus. Change the code to take ->siglock to pin ->signal. Signed-off-by: Oleg Nesterov Cc: Arve Hjønnevåg Cc: Brian Swetland Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/binder.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c index ab014bc96831..758131cad08a 100644 --- a/drivers/staging/android/binder.c +++ b/drivers/staging/android/binder.c @@ -319,6 +319,7 @@ int task_get_unused_fd_flags(struct task_struct *tsk, int flags) int fd, error; struct fdtable *fdt; unsigned long rlim_cur; + unsigned long irqs; if (files == NULL) return -ESRCH; @@ -335,12 +336,11 @@ repeat: * N.B. For clone tasks sharing a files structure, this test * will limit the total number of files that can be opened. */ - rcu_read_lock(); - if (tsk->signal) + rlim_cur = 0; + if (lock_task_sighand(tsk, &irqs)) { rlim_cur = tsk->signal->rlim[RLIMIT_NOFILE].rlim_cur; - else - rlim_cur = 0; - rcu_read_unlock(); + unlock_task_sighand(tsk, &irqs); + } if (fd >= rlim_cur) goto out; -- cgit v1.2.1 From e48d94dac7eef16b4a4f246bf7b8df0f00cc0aec Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 12 Jan 2009 09:19:42 +0100 Subject: staging: agnx: drivers/staging/agnx/agnx.h needs On m68k: drivers/staging/agnx/agnx.h: In function 'agnx_read32': drivers/staging/agnx/agnx.h:10: error: implicit declaration of function 'ioread32' drivers/staging/agnx/agnx.h: In function 'agnx_write32': drivers/staging/agnx/agnx.h:15: error: implicit declaration of function 'iowrite32' drivers/staging/agnx/sta.c: In function 'get_sta_power': drivers/staging/agnx/sta.c:94: error: implicit declaration of function 'memcpy_fromio' drivers/staging/agnx/sta.c: In function 'set_sta_power': drivers/staging/agnx/sta.c:103: error: implicit declaration of function 'memcpy_toio' Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman --- drivers/staging/agnx/agnx.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/staging/agnx/agnx.h b/drivers/staging/agnx/agnx.h index a75b0db3726c..20f36da62475 100644 --- a/drivers/staging/agnx/agnx.h +++ b/drivers/staging/agnx/agnx.h @@ -1,6 +1,8 @@ #ifndef AGNX_H_ #define AGNX_H_ +#include + #include "xmit.h" #define PFX KBUILD_MODNAME ": " -- cgit v1.2.1 From 05d6d677ab4b975697c6a987f1dffdc55d61a160 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 19 Dec 2008 23:37:30 +0100 Subject: Staging: usbip: usbip_start_threads(): handle kernel_thread failure kernel_thread may fail, notice this. Signed-off-by: Roel Kluin Signed-off-by: Greg Kroah-Hartman --- drivers/staging/usbip/usbip_common.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/staging/usbip/usbip_common.c b/drivers/staging/usbip/usbip_common.c index 72e209276ea7..22f93dd0ba03 100644 --- a/drivers/staging/usbip/usbip_common.c +++ b/drivers/staging/usbip/usbip_common.c @@ -406,8 +406,20 @@ void usbip_start_threads(struct usbip_device *ud) /* * threads are invoked per one device (per one connection). */ - kernel_thread(usbip_thread, (void *)&ud->tcp_rx, 0); - kernel_thread(usbip_thread, (void *)&ud->tcp_tx, 0); + int retval; + + retval = kernel_thread(usbip_thread, (void *)&ud->tcp_rx, 0); + if (retval < 0) { + printk(KERN_ERR "Creating tcp_rx thread for ud %p failed.\n", + ud); + return; + } + retval = kernel_thread(usbip_thread, (void *)&ud->tcp_tx, 0); + if (retval < 0) { + printk(KERN_ERR "Creating tcp_tx thread for ud %p failed.\n", + ud); + return; + } /* confirm threads are starting */ wait_for_completion(&ud->tcp_rx.thread_done); -- cgit v1.2.1 From dcbbcefb6a6d540b605421e85fbaa4cea3fef5a2 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 28 Jan 2009 22:14:17 +0100 Subject: Staging: poch: fix verification of memory area fix verification of memory area Signed-off-by: Roel Kluin Signed-off-by: Greg Kroah-Hartman --- drivers/staging/poch/poch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/poch/poch.c b/drivers/staging/poch/poch.c index ec343ef53a85..0d111ddfabb2 100644 --- a/drivers/staging/poch/poch.c +++ b/drivers/staging/poch/poch.c @@ -1026,7 +1026,7 @@ static int poch_ioctl(struct inode *inode, struct file *filp, } break; case POCH_IOC_GET_COUNTERS: - if (access_ok(VERIFY_WRITE, argp, sizeof(struct poch_counters))) + if (!access_ok(VERIFY_WRITE, argp, sizeof(struct poch_counters))) return -EFAULT; spin_lock_irq(&channel->counters_lock); -- cgit v1.2.1 From 720893fd5fb6de1f752f816a89e630f08ae8b20a Mon Sep 17 00:00:00 2001 From: Tsugikazu Shibata Date: Fri, 23 Jan 2009 09:59:50 +0900 Subject: Sync patch for jp_JP/stable_kernel_rules.txt Updated jp_JP/stable_kernel_rules.txt due to changes in the main version of the file. Also, this patch is already reviewed by Japanese translation community called JF. Signed-off-by: Tsugikazu Shibata Signed-off-by: Greg Kroah-Hartman --- Documentation/ja_JP/stable_kernel_rules.txt | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/Documentation/ja_JP/stable_kernel_rules.txt b/Documentation/ja_JP/stable_kernel_rules.txt index b3ffe870de33..14265837c4ce 100644 --- a/Documentation/ja_JP/stable_kernel_rules.txt +++ b/Documentation/ja_JP/stable_kernel_rules.txt @@ -12,11 +12,11 @@ file at first. ================================== これは、 -linux-2.6.24/Documentation/stable_kernel_rules.txt +linux-2.6.29/Documentation/stable_kernel_rules.txt の和訳です。 翻訳団体： JF プロジェクト < http://www.linux.or.jp/JF/ > -翻訳日： 2007/12/30 +翻訳日： 2009/1/14 翻訳者： Tsugikazu Shibata 校正者： 武井伸光さん、 かねこさん (Seiji Kaneko) @@ -38,12 +38,15 @@ linux-2.6.24/Documentation/stable_kernel_rules.txt - ビルドエラー(CONFIG_BROKENになっているものを除く), oops, ハング、デー タ破壊、現実のセキュリティ問題、その他 "ああ、これはダメだね"という ようなものを修正しなければならない。短く言えば、重大な問題。 + - 新しい device ID とクオークも受け入れられる。 - どのように競合状態が発生するかの説明も一緒に書かれていない限り、 "理論的には競合状態になる"ようなものは不可。 - いかなる些細な修正も含めることはできない。(スペルの修正、空白のクリー ンアップなど) - - 対応するサブシステムメンテナが受け入れたものでなければならない。 - Documentation/SubmittingPatches の規則に従ったものでなければならない。 + - パッチ自体か同等の修正が Linus のツリーに既に存在しなければならない。 +　 Linus のツリーでのコミットID を -stable へのパッチ投稿の際に引用す + ること。 -stable ツリーにパッチを送付する手続き- @@ -52,8 +55,10 @@ linux-2.6.24/Documentation/stable_kernel_rules.txt - 送信者はパッチがキューに受け付けられた際には ACK を、却下された場合 には NAK を受け取る。この反応は開発者たちのスケジュールによって、数 日かかる場合がある。 - - もし受け取られたら、パッチは他の開発者たちのレビューのために - -stable キューに追加される。 + - もし受け取られたら、パッチは他の開発者たちと関連するサブシステムの + メンテナーによるレビューのために -stable キューに追加される。 + - パッチに stable@kernel.org のアドレスが付加されているときには、それ + が Linus のツリーに入る時に自動的に stable チームに email される。 - セキュリティパッチはこのエイリアス (stable@kernel.org) に送られるべ きではなく、代わりに security@kernel.org のアドレスに送られる。 -- cgit v1.2.1 From 6a1b699678c8c0d45f88a37b32358a9e82bef6bb Mon Sep 17 00:00:00 2001 From: "Hans J. Koch" Date: Wed, 7 Jan 2009 00:12:37 +0100 Subject: UIO: Add missing documentation of features added recently MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The following features were added to the UIO framework in the near past: * Generic drivers for platform devices (uio_pdrv, uio_pdrv_genirq) * an "offset" sysfs attribute for memory mappings Unfortunately, all this went in without documentation (won't happen again...) This patch updates UIO documentation. Signed-off-by: Hans J. Koch Acked-by: Uwe Kleine-König Signed-off-by: Greg Kroah-Hartman --- Documentation/DocBook/uio-howto.tmpl | 88 ++++++++++++++++++++++++++++++++++++ 1 file changed, 88 insertions(+) diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl index b787e4721c90..52e1b79ce0e6 100644 --- a/Documentation/DocBook/uio-howto.tmpl +++ b/Documentation/DocBook/uio-howto.tmpl @@ -41,6 +41,12 @@ GPL version 2. + + 0.7 + 2008-12-23 + hjk + Added generic platform drivers and offset attribute. + 0.6 2008-12-05 @@ -312,6 +318,16 @@ interested in translating it, please email me pointed to by addr. + + + offset: The offset, in bytes, that has to be + added to the pointer returned by mmap() to get + to the actual device memory. This is important if the device's memory + is not page aligned. Remember that pointers returned by + mmap() are always page aligned, so it is good + style to always add this offset. + + @@ -594,6 +610,78 @@ framework to set up sysfs files for this region. Simply leave it alone. + +Using uio_pdrv for platform devices + + In many cases, UIO drivers for platform devices can be handled in a + generic way. In the same place where you define your + struct platform_device, you simply also implement + your interrupt handler and fill your + struct uio_info. A pointer to this + struct uio_info is then used as + platform_data for your platform device. + + + You also need to set up an array of struct resource + containing addresses and sizes of your memory mappings. This + information is passed to the driver using the + .resource and .num_resources + elements of struct platform_device. + + + You now have to set the .name element of + struct platform_device to + "uio_pdrv" to use the generic UIO platform device + driver. This driver will fill the mem[] array + according to the resources given, and register the device. + + + The advantage of this approach is that you only have to edit a file + you need to edit anyway. You do not have to create an extra driver. + + + + +Using uio_pdrv_genirq for platform devices + + Especially in embedded devices, you frequently find chips where the + irq pin is tied to its own dedicated interrupt line. In such cases, + where you can be really sure the interrupt is not shared, we can take + the concept of uio_pdrv one step further and use a + generic interrupt handler. That's what + uio_pdrv_genirq does. + + + The setup for this driver is the same as described above for + uio_pdrv, except that you do not implement an + interrupt handler. The .handler element of + struct uio_info must remain + NULL. The .irq_flags element + must not contain IRQF_SHARED. + + + You will set the .name element of + struct platform_device to + "uio_pdrv_genirq" to use this driver. + + + The generic interrupt handler of uio_pdrv_genirq + will simply disable the interrupt line using + disable_irq_nosync(). After doing its work, + userspace can reenable the interrupt by writing 0x00000001 to the UIO + device file. The driver already implements an + irq_control() to make this possible, you must not + implement your own. + + + Using uio_pdrv_genirq not only saves a few lines of + interrupt handler code. You also do not need to know anything about + the chip's internal registers to create the kernel part of the driver. + All you need to know is the irq number of the pin the chip is + connected to. + + + -- cgit v1.2.1 From 7cbcf22548df1f1df7c6b0d0bda579b92efca63c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 20 Jan 2009 16:29:13 -0800 Subject: driver-core: fix kernel-doc parameter name Fix function parameter name in kernel-doc: Warning(linux-next-20090120//drivers/base/core.c:1289): No description found for parameter 'dev' Warning(linux-next-20090120//drivers/base/core.c:1289): Excess function parameter 'root' description in 'root_device_unregister' Signed-off-by: Randy Dunlap Acked-by: Mark McLoughlin Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index 55e530942ab0..f3eae630e589 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1280,7 +1280,7 @@ EXPORT_SYMBOL_GPL(__root_device_register); /** * root_device_unregister - unregister and free a root device - * @root: device going away. + * @dev: device going away * * This function unregisters and cleans up a device that was created by * root_device_register(). -- cgit v1.2.1 From 0496e02d8791e7f06673a19a181be30dad6eff70 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Tue, 30 Dec 2008 12:39:16 -0500 Subject: cifs: turn smb_send into a wrapper around smb_sendv cifs: turn smb_send into a wrapper around smb_sendv Rename smb_send2 to smb_sendv to make it consistent with kernel naming conventions for functions that take a vector. There's no need to have 2 functions to handle sending SMB calls. Turn smb_send into a wrapper around smb_sendv. This also allows us to properly mark the socket as needing to be reconnected when there's a partial send from smb_send. Also, in practice we always use the address and noblocksnd flag that's attached to the TCP_Server_Info. There's no need to pass them in as separate args to smb_sendv. Signed-off-by: Jeff Layton Acked-by: Dave Kleikamp Signed-off-by: Steve French --- fs/cifs/cifsproto.h | 4 +- fs/cifs/connect.c | 4 +- fs/cifs/transport.c | 107 ++++++++++------------------------------------------ 3 files changed, 22 insertions(+), 93 deletions(-) diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 06f6779988bf..382ba6298809 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -35,8 +35,8 @@ extern struct smb_hdr *cifs_buf_get(void); extern void cifs_buf_release(void *); extern struct smb_hdr *cifs_small_buf_get(void); extern void cifs_small_buf_release(void *); -extern int smb_send(struct socket *, struct smb_hdr *, - unsigned int /* length */ , struct sockaddr *, bool); +extern int smb_send(struct TCP_Server_Info *, struct smb_hdr *, + unsigned int /* length */); extern unsigned int _GetXid(void); extern void _FreeXid(unsigned int); #define GetXid() (int)_GetXid(); cFYI(1,("CIFS VFS: in %s as Xid: %d with uid: %d",__func__, xid,current_fsuid())); diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index e9ea394ee075..7419576228fb 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1860,9 +1860,7 @@ ipv4_connect(struct TCP_Server_Info *server) smb_buf = (struct smb_hdr *)ses_init_buf; /* sizeof RFC1002_SESSION_REQUEST with no scope */ smb_buf->smb_buf_length = 0x81000044; - rc = smb_send(socket, smb_buf, 0x44, - (struct sockaddr *) &server->addr.sockAddr, - server->noblocksnd); + rc = smb_send(server, smb_buf, 0x44); kfree(ses_init_buf); msleep(1); /* RFC1001 layer in at least one server requires very short break before negprot diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index 7ebe6599ed3a..2c7efd26992d 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -154,81 +154,8 @@ void DeleteTconOplockQEntries(struct cifsTconInfo *tcon) spin_unlock(&GlobalMid_Lock); } -int -smb_send(struct socket *ssocket, struct smb_hdr *smb_buffer, - unsigned int smb_buf_length, struct sockaddr *sin, bool noblocksnd) -{ - int rc = 0; - int i = 0; - struct msghdr smb_msg; - struct kvec iov; - unsigned len = smb_buf_length + 4; - - if (ssocket == NULL) - return -ENOTSOCK; /* BB eventually add reconnect code here */ - iov.iov_base = smb_buffer; - iov.iov_len = len; - - smb_msg.msg_name = sin; - smb_msg.msg_namelen = sizeof(struct sockaddr); - smb_msg.msg_control = NULL; - smb_msg.msg_controllen = 0; - if (noblocksnd) - smb_msg.msg_flags = MSG_DONTWAIT + MSG_NOSIGNAL; - else - smb_msg.msg_flags = MSG_NOSIGNAL; - - /* smb header is converted in header_assemble. bcc and rest of SMB word - area, and byte area if necessary, is converted to littleendian in - cifssmb.c and RFC1001 len is converted to bigendian in smb_send - Flags2 is converted in SendReceive */ - - smb_buffer->smb_buf_length = cpu_to_be32(smb_buffer->smb_buf_length); - cFYI(1, ("Sending smb of length %d", smb_buf_length)); - dump_smb(smb_buffer, len); - - while (len > 0) { - rc = kernel_sendmsg(ssocket, &smb_msg, &iov, 1, len); - if ((rc == -ENOSPC) || (rc == -EAGAIN)) { - i++; - /* smaller timeout here than send2 since smaller size */ - /* Although it may not be required, this also is smaller - oplock break time */ - if (i > 12) { - cERROR(1, - ("sends on sock %p stuck for 7 seconds", - ssocket)); - rc = -EAGAIN; - break; - } - msleep(1 << i); - continue; - } - if (rc < 0) - break; - else - i = 0; /* reset i after each successful send */ - iov.iov_base += rc; - iov.iov_len -= rc; - len -= rc; - } - - if (rc < 0) { - cERROR(1, ("Error %d sending data on socket to server", rc)); - } else { - rc = 0; - } - - /* Don't want to modify the buffer as a - side effect of this call. */ - smb_buffer->smb_buf_length = smb_buf_length; - - return rc; -} - static int -smb_send2(struct TCP_Server_Info *server, struct kvec *iov, int n_vec, - struct sockaddr *sin, bool noblocksnd) +smb_sendv(struct TCP_Server_Info *server, struct kvec *iov, int n_vec) { int rc = 0; int i = 0; @@ -243,11 +170,11 @@ smb_send2(struct TCP_Server_Info *server, struct kvec *iov, int n_vec, if (ssocket == NULL) return -ENOTSOCK; /* BB eventually add reconnect code here */ - smb_msg.msg_name = sin; + smb_msg.msg_name = (struct sockaddr *) &server->addr.sockAddr; smb_msg.msg_namelen = sizeof(struct sockaddr); smb_msg.msg_control = NULL; smb_msg.msg_controllen = 0; - if (noblocksnd) + if (server->noblocksnd) smb_msg.msg_flags = MSG_DONTWAIT + MSG_NOSIGNAL; else smb_msg.msg_flags = MSG_NOSIGNAL; @@ -339,6 +266,18 @@ smb_send2(struct TCP_Server_Info *server, struct kvec *iov, int n_vec, return rc; } +int +smb_send(struct TCP_Server_Info *server, struct smb_hdr *smb_buffer, + unsigned int smb_buf_length) +{ + struct kvec iov; + + iov.iov_base = smb_buffer; + iov.iov_len = smb_buf_length + 4; + + return smb_sendv(server, &iov, 1); +} + static int wait_for_free_request(struct cifsSesInfo *ses, const int long_op) { if (long_op == CIFS_ASYNC_OP) { @@ -540,9 +479,7 @@ SendReceive2(const unsigned int xid, struct cifsSesInfo *ses, #ifdef CONFIG_CIFS_STATS2 atomic_inc(&ses->server->inSend); #endif - rc = smb_send2(ses->server, iov, n_vec, - (struct sockaddr *) &(ses->server->addr.sockAddr), - ses->server->noblocksnd); + rc = smb_sendv(ses->server, iov, n_vec); #ifdef CONFIG_CIFS_STATS2 atomic_dec(&ses->server->inSend); midQ->when_sent = jiffies; @@ -736,9 +673,7 @@ SendReceive(const unsigned int xid, struct cifsSesInfo *ses, #ifdef CONFIG_CIFS_STATS2 atomic_inc(&ses->server->inSend); #endif - rc = smb_send(ses->server->ssocket, in_buf, in_buf->smb_buf_length, - (struct sockaddr *) &(ses->server->addr.sockAddr), - ses->server->noblocksnd); + rc = smb_send(ses->server, in_buf, in_buf->smb_buf_length); #ifdef CONFIG_CIFS_STATS2 atomic_dec(&ses->server->inSend); midQ->when_sent = jiffies; @@ -879,9 +814,7 @@ send_nt_cancel(struct cifsTconInfo *tcon, struct smb_hdr *in_buf, mutex_unlock(&ses->server->srv_mutex); return rc; } - rc = smb_send(ses->server->ssocket, in_buf, in_buf->smb_buf_length, - (struct sockaddr *) &(ses->server->addr.sockAddr), - ses->server->noblocksnd); + rc = smb_send(ses->server, in_buf, in_buf->smb_buf_length); mutex_unlock(&ses->server->srv_mutex); return rc; } @@ -973,9 +906,7 @@ SendReceiveBlockingLock(const unsigned int xid, struct cifsTconInfo *tcon, #ifdef CONFIG_CIFS_STATS2 atomic_inc(&ses->server->inSend); #endif - rc = smb_send(ses->server->ssocket, in_buf, in_buf->smb_buf_length, - (struct sockaddr *) &(ses->server->addr.sockAddr), - ses->server->noblocksnd); + rc = smb_send(ses->server, in_buf, in_buf->smb_buf_length); #ifdef CONFIG_CIFS_STATS2 atomic_dec(&ses->server->inSend); midQ->when_sent = jiffies; -- cgit v1.2.1 From 6a7f8d36c00ab7adef5fb633f7805c91e8c1e139 Mon Sep 17 00:00:00 2001 From: Steve French Date: Mon, 12 Jan 2009 21:03:25 +0000 Subject: [CIFS] Rename md5 functions to avoid collision with new rt modules When rt modules were added they (each) included their own md5 with names which collided with the existing names of cifs's md5 functions. Renaming cifs's md5 modules so we don't collide with them. > Stephen Rothwell wrote: > When CIFS is built-in (=y) and staging/rt28[67]0 =y, there are multiple > definitions of: > > build-r8250.out:(.text+0x1d8ad0): multiple definition of `MD5Init' > build-r8250.out:(.text+0x1dbb30): multiple definition of `MD5Update' > build-r8250.out:(.text+0x1db9b0): multiple definition of `MD5Final' > > all of which need to have more unique identifiers for their global > symbols (e.g., rt28_md5_init, cifs_md5_init, foo, blah, bar). > CC: Greg K-H Signed-off-by: Steve French --- fs/cifs/cifsencrypt.c | 18 +++++++++--------- fs/cifs/md5.c | 38 +++++++++++++++++++------------------- fs/cifs/md5.h | 6 +++--- 3 files changed, 31 insertions(+), 31 deletions(-) diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c index d4839cf0cb2c..7c9809523f42 100644 --- a/fs/cifs/cifsencrypt.c +++ b/fs/cifs/cifsencrypt.c @@ -48,11 +48,11 @@ static int cifs_calculate_signature(const struct smb_hdr *cifs_pdu, if ((cifs_pdu == NULL) || (signature == NULL) || (key == NULL)) return -EINVAL; - MD5Init(&context); - MD5Update(&context, (char *)&key->data, key->len); - MD5Update(&context, cifs_pdu->Protocol, cifs_pdu->smb_buf_length); + cifs_MD5_init(&context); + cifs_MD5_update(&context, (char *)&key->data, key->len); + cifs_MD5_update(&context, cifs_pdu->Protocol, cifs_pdu->smb_buf_length); - MD5Final(signature, &context); + cifs_MD5_final(signature, &context); return 0; } @@ -96,8 +96,8 @@ static int cifs_calc_signature2(const struct kvec *iov, int n_vec, if ((iov == NULL) || (signature == NULL) || (key == NULL)) return -EINVAL; - MD5Init(&context); - MD5Update(&context, (char *)&key->data, key->len); + cifs_MD5_init(&context); + cifs_MD5_update(&context, (char *)&key->data, key->len); for (i = 0; i < n_vec; i++) { if (iov[i].iov_len == 0) continue; @@ -110,13 +110,13 @@ static int cifs_calc_signature2(const struct kvec *iov, int n_vec, if (i == 0) { if (iov[0].iov_len <= 8) /* cmd field at offset 9 */ break; /* nothing to sign or corrupt header */ - MD5Update(&context, iov[0].iov_base+4, + cifs_MD5_update(&context, iov[0].iov_base+4, iov[0].iov_len-4); } else - MD5Update(&context, iov[i].iov_base, iov[i].iov_len); + cifs_MD5_update(&context, iov[i].iov_base, iov[i].iov_len); } - MD5Final(signature, &context); + cifs_MD5_final(signature, &context); return 0; } diff --git a/fs/cifs/md5.c b/fs/cifs/md5.c index 462bbfefd4b6..98b66a54c319 100644 --- a/fs/cifs/md5.c +++ b/fs/cifs/md5.c @@ -10,8 +10,8 @@ * with every copy. * * To compute the message digest of a chunk of bytes, declare an - * MD5Context structure, pass it to MD5Init, call MD5Update as - * needed on buffers full of bytes, and then call MD5Final, which + * MD5Context structure, pass it to cifs_MD5_init, call cifs_MD5_update as + * needed on buffers full of bytes, and then call cifs_MD5_final, which * will fill a supplied 16-byte array with the digest. */ @@ -45,7 +45,7 @@ byteReverse(unsigned char *buf, unsigned longs) * initialization constants. */ void -MD5Init(struct MD5Context *ctx) +cifs_MD5_init(struct MD5Context *ctx) { ctx->buf[0] = 0x67452301; ctx->buf[1] = 0xefcdab89; @@ -61,7 +61,7 @@ MD5Init(struct MD5Context *ctx) * of bytes. */ void -MD5Update(struct MD5Context *ctx, unsigned char const *buf, unsigned len) +cifs_MD5_update(struct MD5Context *ctx, unsigned char const *buf, unsigned len) { register __u32 t; @@ -110,7 +110,7 @@ MD5Update(struct MD5Context *ctx, unsigned char const *buf, unsigned len) * 1 0* (64-bit count of bits processed, MSB-first) */ void -MD5Final(unsigned char digest[16], struct MD5Context *ctx) +cifs_MD5_final(unsigned char digest[16], struct MD5Context *ctx) { unsigned int count; unsigned char *p; @@ -165,7 +165,7 @@ MD5Final(unsigned char digest[16], struct MD5Context *ctx) /* * The core of the MD5 algorithm, this alters an existing MD5 hash to - * reflect the addition of 16 longwords of new data. MD5Update blocks + * reflect the addition of 16 longwords of new data. cifs_MD5_update blocks * the data and converts bytes into longwords for this routine. */ static void @@ -267,9 +267,9 @@ hmac_md5_init_rfc2104(unsigned char *key, int key_len, unsigned char tk[16]; struct MD5Context tctx; - MD5Init(&tctx); - MD5Update(&tctx, key, key_len); - MD5Final(tk, &tctx); + cifs_MD5_init(&tctx); + cifs_MD5_update(&tctx, key, key_len); + cifs_MD5_final(tk, &tctx); key = tk; key_len = 16; @@ -287,8 +287,8 @@ hmac_md5_init_rfc2104(unsigned char *key, int key_len, ctx->k_opad[i] ^= 0x5c; } - MD5Init(&ctx->ctx); - MD5Update(&ctx->ctx, ctx->k_ipad, 64); + cifs_MD5_init(&ctx->ctx); + cifs_MD5_update(&ctx->ctx, ctx->k_ipad, 64); } #endif @@ -317,8 +317,8 @@ hmac_md5_init_limK_to_64(const unsigned char *key, int key_len, ctx->k_opad[i] ^= 0x5c; } - MD5Init(&ctx->ctx); - MD5Update(&ctx->ctx, ctx->k_ipad, 64); + cifs_MD5_init(&ctx->ctx); + cifs_MD5_update(&ctx->ctx, ctx->k_ipad, 64); } /*********************************************************************** @@ -328,7 +328,7 @@ void hmac_md5_update(const unsigned char *text, int text_len, struct HMACMD5Context *ctx) { - MD5Update(&ctx->ctx, text, text_len); /* then text of datagram */ + cifs_MD5_update(&ctx->ctx, text, text_len); /* then text of datagram */ } /*********************************************************************** @@ -339,12 +339,12 @@ hmac_md5_final(unsigned char *digest, struct HMACMD5Context *ctx) { struct MD5Context ctx_o; - MD5Final(digest, &ctx->ctx); + cifs_MD5_final(digest, &ctx->ctx); - MD5Init(&ctx_o); - MD5Update(&ctx_o, ctx->k_opad, 64); - MD5Update(&ctx_o, digest, 16); - MD5Final(digest, &ctx_o); + cifs_MD5_init(&ctx_o); + cifs_MD5_update(&ctx_o, ctx->k_opad, 64); + cifs_MD5_update(&ctx_o, digest, 16); + cifs_MD5_final(digest, &ctx_o); } /*********************************************************** diff --git a/fs/cifs/md5.h b/fs/cifs/md5.h index f7d4f4197bac..6fba8cb402fd 100644 --- a/fs/cifs/md5.h +++ b/fs/cifs/md5.h @@ -20,10 +20,10 @@ struct HMACMD5Context { }; #endif /* _HMAC_MD5_H */ -void MD5Init(struct MD5Context *context); -void MD5Update(struct MD5Context *context, unsigned char const *buf, +void cifs_MD5_init(struct MD5Context *context); +void cifs_MD5_update(struct MD5Context *context, unsigned char const *buf, unsigned len); -void MD5Final(unsigned char digest[16], struct MD5Context *context); +void cifs_MD5_final(unsigned char digest[16], struct MD5Context *context); /* The following definitions come from lib/hmacmd5.c */ -- cgit v1.2.1 From 42c245447c8c3f998dfe880aba18b6e5129d2976 Mon Sep 17 00:00:00 2001 From: Steve French Date: Tue, 13 Jan 2009 22:03:55 +0000 Subject: [CIFS] revalidate parent inode when rmdir done within that directory When a search is pending of a parent directory, and a child directory within it is removed, we need to reset the parent directory's time so that we don't reuse the (now stale) search results. Thanks to Gunter Kukkukk for reporting this: > got the following failure notification on irc #samba: > > A user was updating from subversion 1.4 to 1.5, where the > repository is located on a samba share (independent of > unix extensions = Yes or No). > svn 1.4 did work, 1.5 does not. > > The user did a lot of stracing of subversion - and wrote a > testapplet to simulate the failing behaviour. > I've converted the C++ source to C and added some error cases. > > When using "./testdir" on a local file system, "result2" > is always (nil) as expected - cifs vfs behaves different here! > > ./testdir /mnt/cifs/mounted/share > > returns a (failing) valid pointer. Acked-by: Dave Kleikamp Acked-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/CHANGES | 4 +++- fs/cifs/inode.c | 5 +++++ 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES index 080703a15f44..73ac7ebd1dfc 100644 --- a/fs/cifs/CHANGES +++ b/fs/cifs/CHANGES @@ -5,7 +5,9 @@ rather than posix (advisory) byte range locks, even though server would support posix byte range locks. Fix query of root inode when prefixpath specified and user does not have access to query information about the top of the share. Fix problem in 2.6.28 resolving DFS paths to -Samba servers (worked to Windows). +Samba servers (worked to Windows). Fix rmdir so that pending search +(readdir) requests do not get invalid results which include the now +removed directory. Version 1.55 ------------ diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 5ab9896fdcb2..bcf7b5184664 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1285,6 +1285,11 @@ int cifs_rmdir(struct inode *inode, struct dentry *direntry) cifsInode = CIFS_I(direntry->d_inode); cifsInode->time = 0; /* force revalidate to go get info when needed */ + + cifsInode = CIFS_I(inode); + cifsInode->time = 0; /* force revalidate to get parent dir info + since cached search results now invalid */ + direntry->d_inode->i_ctime = inode->i_ctime = inode->i_mtime = current_fs_time(inode->i_sb); -- cgit v1.2.1 From f818dd55c4a8b3519e203900bde0bb780d36e799 Mon Sep 17 00:00:00 2001 From: Steve French Date: Mon, 19 Jan 2009 02:38:35 +0000 Subject: [CIFS] some cleanup to dir.c prior to addition of posix_open Signed-off-by: Steve French --- fs/cifs/dir.c | 56 +++++++++++++++++++++++++++++++------------------------- 1 file changed, 31 insertions(+), 25 deletions(-) diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index 838d9c720a5c..964aad03c5ad 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -129,6 +129,17 @@ cifs_bp_rename_retry: return full_path; } +static void setup_cifs_dentry(struct cifsTconInfo *tcon, + struct dentry *direntry, + struct inode *newinode) +{ + if (tcon->nocase) + direntry->d_op = &cifs_ci_dentry_ops; + else + direntry->d_op = &cifs_dentry_ops; + d_instantiate(direntry, newinode); +} + /* Inode operations in similar order to how they appear in Linux file fs.h */ int @@ -139,14 +150,14 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, int xid; int create_options = CREATE_NOT_DIR; int oplock = 0; + /* BB below access is too much for the mknod to request */ int desiredAccess = GENERIC_READ | GENERIC_WRITE; __u16 fileHandle; struct cifs_sb_info *cifs_sb; - struct cifsTconInfo *pTcon; + struct cifsTconInfo *tcon; char *full_path = NULL; FILE_ALL_INFO *buf = NULL; struct inode *newinode = NULL; - struct cifsFileInfo *pCifsFile = NULL; struct cifsInodeInfo *pCifsInode; int disposition = FILE_OVERWRITE_IF; bool write_only = false; @@ -154,7 +165,7 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, xid = GetXid(); cifs_sb = CIFS_SB(inode->i_sb); - pTcon = cifs_sb->tcon; + tcon = cifs_sb->tcon; full_path = build_path_from_dentry(direntry); if (full_path == NULL) { @@ -162,6 +173,8 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, return -ENOMEM; } + mode &= ~current->fs->umask; + if (nd && (nd->flags & LOOKUP_OPEN)) { int oflags = nd->intent.open.flags; @@ -196,17 +209,15 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, return -ENOMEM; } - mode &= ~current->fs->umask; - /* * if we're not using unix extensions, see if we need to set * ATTR_READONLY on the create call */ - if (!pTcon->unix_ext && (mode & S_IWUGO) == 0) + if (!tcon->unix_ext && (mode & S_IWUGO) == 0) create_options |= CREATE_OPTION_READONLY; if (cifs_sb->tcon->ses->capabilities & CAP_NT_SMBS) - rc = CIFSSMBOpen(xid, pTcon, full_path, disposition, + rc = CIFSSMBOpen(xid, tcon, full_path, disposition, desiredAccess, create_options, &fileHandle, &oplock, buf, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); @@ -215,7 +226,7 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, if (rc == -EIO) { /* old server, retry the open legacy style */ - rc = SMBLegacyOpen(xid, pTcon, full_path, disposition, + rc = SMBLegacyOpen(xid, tcon, full_path, disposition, desiredAccess, create_options, &fileHandle, &oplock, buf, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); @@ -225,7 +236,7 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, } else { /* If Open reported that we actually created a file then we now have to set the mode if possible */ - if ((pTcon->unix_ext) && (oplock & CIFS_CREATE_ACTION)) { + if ((tcon->unix_ext) && (oplock & CIFS_CREATE_ACTION)) { struct cifs_unix_set_info_args args = { .mode = mode, .ctime = NO_CHANGE_64, @@ -244,20 +255,20 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, args.uid = NO_CHANGE_64; args.gid = NO_CHANGE_64; } - CIFSSMBUnixSetInfo(xid, pTcon, full_path, &args, + CIFSSMBUnixSetInfo(xid, tcon, full_path, &args, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); } else { /* BB implement mode setting via Windows security descriptors e.g. */ - /* CIFSSMBWinSetPerms(xid,pTcon,path,mode,-1,-1,nls);*/ + /* CIFSSMBWinSetPerms(xid,tcon,path,mode,-1,-1,nls);*/ /* Could set r/o dos attribute if mode & 0222 == 0 */ } /* server might mask mode so we have to query for it */ - if (pTcon->unix_ext) + if (tcon->unix_ext) rc = cifs_get_inode_info_unix(&newinode, full_path, inode->i_sb, xid); else { @@ -283,22 +294,17 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, } if (rc != 0) { - cFYI(1, - ("Create worked but get_inode_info failed rc = %d", - rc)); - } else { - if (pTcon->nocase) - direntry->d_op = &cifs_ci_dentry_ops; - else - direntry->d_op = &cifs_dentry_ops; - d_instantiate(direntry, newinode); - } + cFYI(1, ("Create worked, get_inode_info failed rc = %d", + rc)); + } else + setup_cifs_dentry(tcon, direntry, newinode); + if ((nd == NULL /* nfsd case - nfs srv does not set nd */) || (!(nd->flags & LOOKUP_OPEN))) { /* mknod case - do not leave file open */ - CIFSSMBClose(xid, pTcon, fileHandle); + CIFSSMBClose(xid, tcon, fileHandle); } else if (newinode) { - pCifsFile = + struct cifsFileInfo *pCifsFile = kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL); if (pCifsFile == NULL) @@ -316,7 +322,7 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, /* set the following in open now pCifsFile->pfile = file; */ write_lock(&GlobalSMBSeslock); - list_add(&pCifsFile->tlist, &pTcon->openFileList); + list_add(&pCifsFile->tlist, &tcon->openFileList); pCifsInode = CIFS_I(newinode); if (pCifsInode) { /* if readable file instance put first in list*/ -- cgit v1.2.1 From da505c386c9f993e43861791dae339b2219cf8dd Mon Sep 17 00:00:00 2001 From: Steve French Date: Mon, 19 Jan 2009 03:49:35 +0000 Subject: [CIFS] Make socket retry timeouts consistent between blocking and nonblocking cases We have used approximately 15 second timeouts on nonblocking sends in the past, and also 15 second SMB timeout (waiting for server responses, for most request types). Now that we can do blocking tcp sends, make blocking send timeout approximately the same (15 seconds). Signed-off-by: Steve French --- fs/cifs/connect.c | 4 ++-- fs/cifs/transport.c | 20 +++++++++++++++++++- 2 files changed, 21 insertions(+), 3 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 7419576228fb..a3537a90a9d9 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1802,7 +1802,7 @@ ipv4_connect(struct TCP_Server_Info *server) * user space buffer */ socket->sk->sk_rcvtimeo = 7 * HZ; - socket->sk->sk_sndtimeo = 3 * HZ; + socket->sk->sk_sndtimeo = 5 * HZ; /* make the bufsizes depend on wsize/rsize and max requests */ if (server->noautotune) { @@ -1953,7 +1953,7 @@ ipv6_connect(struct TCP_Server_Info *server) * user space buffer */ socket->sk->sk_rcvtimeo = 7 * HZ; - socket->sk->sk_sndtimeo = 3 * HZ; + socket->sk->sk_sndtimeo = 5 * HZ; server->ssocket = socket; return rc; diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index 2c7efd26992d..0ad3e2d116a6 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -199,7 +199,25 @@ smb_sendv(struct TCP_Server_Info *server, struct kvec *iov, int n_vec) n_vec - first_vec, total_len); if ((rc == -ENOSPC) || (rc == -EAGAIN)) { i++; - if (i >= 14) { + /* if blocking send we try 3 times, since each can block + for 5 seconds. For nonblocking we have to try more + but wait increasing amounts of time allowing time for + socket to clear. The overall time we wait in either + case to send on the socket is about 15 seconds. + Similarly we wait for 15 seconds for + a response from the server in SendReceive[2] + for the server to send a response back for + most types of requests (except SMB Write + past end of file which can be slow, and + blocking lock operations). NFS waits slightly longer + than CIFS, but this can make it take longer for + nonresponsive servers to be detected and 15 seconds + is more than enough time for modern networks to + send a packet. In most cases if we fail to send + after the retries we will kill the socket and + reconnect which may clear the network problem. + */ + if ((i >= 14) || (!server->noblocksnd && (i > 2))) { cERROR(1, ("sends on sock %p stuck for 15 seconds", ssocket)); -- cgit v1.2.1 From a9ac49d303f967be0dabd97cb722c4a13109c6c2 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 22 Jan 2009 14:43:21 -0500 Subject: cifs: make sure we allocate enough storage for socket address The sockaddr declared on the stack in cifs_get_tcp_session is too small for IPv6 addresses. Change it from "struct sockaddr" to "struct sockaddr_storage" to prevent stack corruption when IPv6 is used. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/connect.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index a3537a90a9d9..2209be943051 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1354,7 +1354,7 @@ cifs_parse_mount_options(char *options, const char *devname, } static struct TCP_Server_Info * -cifs_find_tcp_session(struct sockaddr *addr) +cifs_find_tcp_session(struct sockaddr_storage *addr) { struct list_head *tmp; struct TCP_Server_Info *server; @@ -1374,11 +1374,11 @@ cifs_find_tcp_session(struct sockaddr *addr) if (server->tcpStatus == CifsNew) continue; - if (addr->sa_family == AF_INET && + if (addr->ss_family == AF_INET && (addr4->sin_addr.s_addr != server->addr.sockAddr.sin_addr.s_addr)) continue; - else if (addr->sa_family == AF_INET6 && + else if (addr->ss_family == AF_INET6 && memcmp(&server->addr.sockAddr6.sin6_addr, &addr6->sin6_addr, sizeof(addr6->sin6_addr))) continue; @@ -1419,12 +1419,12 @@ static struct TCP_Server_Info * cifs_get_tcp_session(struct smb_vol *volume_info) { struct TCP_Server_Info *tcp_ses = NULL; - struct sockaddr addr; + struct sockaddr_storage addr; struct sockaddr_in *sin_server = (struct sockaddr_in *) &addr; struct sockaddr_in6 *sin_server6 = (struct sockaddr_in6 *) &addr; int rc; - memset(&addr, 0, sizeof(struct sockaddr)); + memset(&addr, 0, sizeof(struct sockaddr_storage)); if (volume_info->UNCip && volume_info->UNC) { rc = cifs_inet_pton(AF_INET, volume_info->UNCip, @@ -1435,9 +1435,9 @@ cifs_get_tcp_session(struct smb_vol *volume_info) rc = cifs_inet_pton(AF_INET6, volume_info->UNCip, &sin_server6->sin6_addr.in6_u); if (rc > 0) - addr.sa_family = AF_INET6; + addr.ss_family = AF_INET6; } else { - addr.sa_family = AF_INET; + addr.ss_family = AF_INET; } if (rc <= 0) { @@ -1502,7 +1502,7 @@ cifs_get_tcp_session(struct smb_vol *volume_info) tcp_ses->tcpStatus = CifsNew; ++tcp_ses->srv_count; - if (addr.sa_family == AF_INET6) { + if (addr.ss_family == AF_INET6) { cFYI(1, ("attempting ipv6 connect")); /* BB should we allow ipv6 on port 139? */ /* other OS never observed in Wild doing 139 with v6 */ -- cgit v1.2.1 From 0fb21de0799a985d2da3da14ae5625d724256638 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Wed, 14 Jan 2009 03:03:21 +0100 Subject: HID: adjust report descriptor fixup for MS 1028 receiver Report descriptor fixup for MS 1028 receiver changes also values for Keyboard and Consumer, which incorrectly trims the range, causing correct events being thrown away before passing to userspace. We need to keep the GenDesk usage fixup though, as it reports totally bogus values about axis. Reported-by: Lucas Gadani Signed-off-by: Jiri Kosina --- drivers/hid/hid-microsoft.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c index d718b1607d0f..25b10dcad90d 100644 --- a/drivers/hid/hid-microsoft.c +++ b/drivers/hid/hid-microsoft.c @@ -30,7 +30,7 @@ #define MS_NOGET 0x10 /* - * Microsoft Wireless Desktop Receiver (Model 1028) has several + * Microsoft Wireless Desktop Receiver (Model 1028) has * 'Usage Min/Max' where it ought to have 'Physical Min/Max' */ static void ms_report_fixup(struct hid_device *hdev, __u8 *rdesc, @@ -38,17 +38,12 @@ static void ms_report_fixup(struct hid_device *hdev, __u8 *rdesc, { unsigned long quirks = (unsigned long)hid_get_drvdata(hdev); - if ((quirks & MS_RDESC) && rsize == 571 && rdesc[284] == 0x19 && - rdesc[286] == 0x2a && rdesc[304] == 0x19 && - rdesc[306] == 0x29 && rdesc[352] == 0x1a && - rdesc[355] == 0x2a && rdesc[557] == 0x19 && + if ((quirks & MS_RDESC) && rsize == 571 && rdesc[557] == 0x19 && rdesc[559] == 0x29) { dev_info(&hdev->dev, "fixing up Microsoft Wireless Receiver " "Model 1028 report descriptor\n"); - rdesc[284] = rdesc[304] = rdesc[557] = 0x35; - rdesc[352] = 0x36; - rdesc[286] = rdesc[355] = 0x46; - rdesc[306] = rdesc[559] = 0x45; + rdesc[557] = 0x35; + rdesc[559] = 0x45; } } -- cgit v1.2.1 From be5d0c837cf8e43458c5757be5df4837a2803d08 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 28 Jan 2009 09:36:18 +0100 Subject: HID: fix reversed logic in disconnect testing of hiddev The logic for testing for disconnection is reversed in an ioctl leading to false reports of disconnection. Signed-off-by: Oliver Neukum Tested-by: Folkert van Heusden Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hiddev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index d73eea382ab3..4940e4d70c2d 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -656,7 +656,7 @@ static long hiddev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case HIDIOCGSTRING: mutex_lock(&hiddev->existancelock); - if (!hiddev->exist) + if (hiddev->exist) r = hiddev_ioctl_string(hiddev, cmd, user_arg); else r = -ENODEV; -- cgit v1.2.1 From 656f1fb90aa2261daa316c0dd8f75e3420f81e9e Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Wed, 28 Jan 2009 21:22:35 +0100 Subject: HID: add antec-branded soundgraph imon devices to blacklist hid_ignore_list additions for the Antec-branded SoundGraph iMon VFD and LCD devices (0x15c2:0x0044 and 0x0045). These devices are driven by lirc. Signed-off-by: Jarod Wilson Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 2 ++ drivers/hid/hid-ids.h | 2 ++ 2 files changed, 4 insertions(+) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 5d7640e49dc5..7001c31c3f2e 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1606,6 +1606,8 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD) }, { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD2) }, { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD3) }, + { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD4) }, + { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD5) }, { HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY1) }, { HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY2) }, { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index acc1abc834a4..e899f510ebeb 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -362,6 +362,8 @@ #define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD 0x0038 #define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD2 0x0036 #define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD3 0x0034 +#define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD4 0x0044 +#define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD5 0x0045 #define USB_VENDOR_ID_SUN 0x0430 #define USB_DEVICE_ID_RARITAN_KVM_DONGLE 0xcdab -- cgit v1.2.1 From bae7eb33b25387fdc7ccae08768bef1f9484a5b0 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Wed, 28 Jan 2009 23:06:37 +0100 Subject: HID: document difference between hid_blacklist and hid_ignore_list Many people get it wrong and add device IDs into hid_blacklist instead of hid_ignore_list. Let's put a little comment in place. Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 7001c31c3f2e..6cad69ed21c5 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1218,6 +1218,7 @@ int hid_connect(struct hid_device *hdev, unsigned int connect_mask) } EXPORT_SYMBOL_GPL(hid_connect); +/* a list of devices for which there is a specialized driver on HID bus */ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) }, { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) }, @@ -1476,6 +1477,7 @@ static struct bus_type hid_bus_type = { .uevent = hid_uevent, }; +/* a list of devices that shouldn't be handled by HID core at all */ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_FLAIR) }, { HID_USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_302) }, -- cgit v1.2.1 From 24c3c41584b9331be5e0d18d46943729a5bd2d4e Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 7 Jan 2009 22:49:25 -0300 Subject: V4L/DVB (10192): em28xx: fix input selection em28xx were trying to access the third input entry, even for boards that don't support it. This patch reviews the input mux selection fixing this bug and a few other troubles, like not validating the input on one userspace ioctl. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-video.c | 41 +++++++++++++++++-------------- 1 file changed, 23 insertions(+), 18 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 416b691c33c1..d40650655f74 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -886,10 +886,10 @@ static int vidioc_s_input(struct file *file, void *priv, unsigned int i) if (0 == INPUT(i)->type) return -EINVAL; - mutex_lock(&dev->lock); - - video_mux(dev, i); + dev->ctl_input = i; + mutex_lock(&dev->lock); + video_mux(dev, dev->ctl_input); mutex_unlock(&dev->lock); return 0; } @@ -939,6 +939,12 @@ static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *a) struct em28xx_fh *fh = priv; struct em28xx *dev = fh->dev; + + if (a->index >= MAX_EM28XX_INPUT) + return -EINVAL; + if (0 == INPUT(a->index)->type) + return -EINVAL; + mutex_lock(&dev->lock); dev->ctl_ainput = INPUT(a->index)->amux; @@ -1957,9 +1963,22 @@ int em28xx_register_analog_devices(struct em28xx *dev) (EM28XX_VERSION_CODE >> 16) & 0xff, (EM28XX_VERSION_CODE >> 8) & 0xff, EM28XX_VERSION_CODE & 0xff); + /* set default norm */ + dev->norm = em28xx_video_template.current_norm; + dev->width = norm_maxw(dev); + dev->height = norm_maxh(dev); + dev->interlaced = EM28XX_INTERLACED_DEFAULT; + dev->hscale = 0; + dev->vscale = 0; + dev->ctl_input = 0; + /* Analog specific initialization */ dev->format = &format[0]; - video_mux(dev, 0); + video_mux(dev, dev->ctl_input); + + /* Audio defaults */ + dev->mute = 1; + dev->volume = 0x1f; /* enable vbi capturing */ @@ -1967,24 +1986,10 @@ int em28xx_register_analog_devices(struct em28xx *dev) /* em28xx_write_reg(dev, EM28XX_R0F_XCLK, 0x80); clk register */ em28xx_write_reg(dev, EM28XX_R11_VINCTRL, 0x51); - dev->mute = 1; /* maybe not the right place... */ - dev->volume = 0x1f; - em28xx_set_outfmt(dev); em28xx_colorlevels_set_default(dev); em28xx_compression_disable(dev); - /* set default norm */ - dev->norm = em28xx_video_template.current_norm; - dev->width = norm_maxw(dev); - dev->height = norm_maxh(dev); - dev->interlaced = EM28XX_INTERLACED_DEFAULT; - dev->hscale = 0; - dev->vscale = 0; - - /* FIXME: This is a very bad hack! Not all devices have TV on input 2 */ - dev->ctl_input = 2; - /* allocate and fill video video_device struct */ dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, "video"); if (!dev->vdev) { -- cgit v1.2.1 From 16e68d7cb8eb1c671867d2a0ecd4aa2e17124364 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Tue, 6 Jan 2009 22:40:56 -0300 Subject: V4L/DVB (10193): removed unused #include 's Removed unused #include 's in files below, drivers/media/video/cs5345.c drivers/media/video/pwc/pwc-if.c drivers/media/video/saa717x.c drivers/media/video/upd64031a.c drivers/media/video/upd64083.c drivers/media/video/uvc/uvc_ctrl.c drivers/media/video/uvc/uvc_driver.c drivers/media/video/uvc/uvc_queue.c drivers/media/video/uvc/uvc_video.c drivers/media/video/uvc/uvc_status.c Signed-off-by: Huang Weiyi Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cs5345.c | 1 - drivers/media/video/pwc/pwc-if.c | 1 - drivers/media/video/saa717x.c | 1 - drivers/media/video/upd64031a.c | 1 - drivers/media/video/upd64083.c | 1 - drivers/media/video/uvc/uvc_ctrl.c | 1 - drivers/media/video/uvc/uvc_driver.c | 1 - drivers/media/video/uvc/uvc_queue.c | 1 - drivers/media/video/uvc/uvc_status.c | 1 - drivers/media/video/uvc/uvc_video.c | 1 - 10 files changed, 10 deletions(-) diff --git a/drivers/media/video/cs5345.c b/drivers/media/video/cs5345.c index 14bebf8a116f..87e91072627a 100644 --- a/drivers/media/video/cs5345.c +++ b/drivers/media/video/cs5345.c @@ -18,7 +18,6 @@ */ -#include #include #include #include diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c index 39fbc970f43d..0d810189dd87 100644 --- a/drivers/media/video/pwc/pwc-if.c +++ b/drivers/media/video/pwc/pwc-if.c @@ -62,7 +62,6 @@ #include #include #include -#include #include #include "pwc.h" diff --git a/drivers/media/video/saa717x.c b/drivers/media/video/saa717x.c index 454ad1dd7507..88c5e942f751 100644 --- a/drivers/media/video/saa717x.c +++ b/drivers/media/video/saa717x.c @@ -30,7 +30,6 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include #include #include #include diff --git a/drivers/media/video/upd64031a.c b/drivers/media/video/upd64031a.c index 4f16effb530f..f4522bb08916 100644 --- a/drivers/media/video/upd64031a.c +++ b/drivers/media/video/upd64031a.c @@ -21,7 +21,6 @@ */ -#include #include #include #include diff --git a/drivers/media/video/upd64083.c b/drivers/media/video/upd64083.c index 4b712f69d1b7..a5fb74bf2407 100644 --- a/drivers/media/video/upd64083.c +++ b/drivers/media/video/upd64083.c @@ -21,7 +21,6 @@ * 02110-1301, USA. */ -#include #include #include #include diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c index 2208165aa6f0..c506068bec61 100644 --- a/drivers/media/video/uvc/uvc_ctrl.c +++ b/drivers/media/video/uvc/uvc_ctrl.c @@ -12,7 +12,6 @@ */ #include -#include #include #include #include diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c index 89d8bd10a852..a0537464987e 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/video/uvc/uvc_driver.c @@ -24,7 +24,6 @@ */ #include -#include #include #include #include diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c index 42546342e97d..8f676f9d9e39 100644 --- a/drivers/media/video/uvc/uvc_queue.c +++ b/drivers/media/video/uvc/uvc_queue.c @@ -12,7 +12,6 @@ */ #include -#include #include #include #include diff --git a/drivers/media/video/uvc/uvc_status.c b/drivers/media/video/uvc/uvc_status.c index 5d60b264d59a..b482f4fc7b31 100644 --- a/drivers/media/video/uvc/uvc_status.c +++ b/drivers/media/video/uvc/uvc_status.c @@ -12,7 +12,6 @@ */ #include -#include #include #include #include diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index e7c31995527f..6e9e30f174a1 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -12,7 +12,6 @@ */ #include -#include #include #include #include -- cgit v1.2.1 From bb1b082ed65292fc6fc7e01bbe0dd005d5a4140e Mon Sep 17 00:00:00 2001 From: Yusuf Altin Date: Thu, 8 Jan 2009 07:58:45 -0300 Subject: V4L/DVB (10195): [PATCH] add Terratec Cinergy T Express to dibcom driver This patch introduces support for dvb-t for the following dibcom based card: Terratec Cinergy T Express (USB-ID: 0ccd:0062) Signed-off-by: Yusuf Altin Signed-off-by: Albert Comerma Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dib0700_devices.c | 10 ++++++++-- drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 1 + 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 391732788911..5e837668fb00 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -1393,6 +1393,7 @@ struct usb_device_id dib0700_usb_id_table[] = { { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000H) }, /* 40 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E) }, { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E_SE) }, + { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_EXPRESS) }, { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); @@ -1537,7 +1538,8 @@ struct dvb_usb_device_properties dib0700_devices[] = { { "DiBcom STK7700D reference design", { &dib0700_usb_id_table[14], NULL }, { NULL }, - } + }, + }, .rc_interval = DEFAULT_RC_INTERVAL, @@ -1557,7 +1559,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { }, }, - .num_device_descs = 2, + .num_device_descs = 3, .devices = { { "ASUS My Cinema U3000 Mini DVBT Tuner", { &dib0700_usb_id_table[23], NULL }, @@ -1566,6 +1568,10 @@ struct dvb_usb_device_properties dib0700_devices[] = { { "Yuan EC372S", { &dib0700_usb_id_table[31], NULL }, { NULL }, + }, + { "Terratec Cinergy T Express", + { &dib0700_usb_id_table[42], NULL }, + { NULL }, } }, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index a4fca3fca5ee..2c6f4be05c07 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -164,6 +164,7 @@ #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY 0x005a #define USB_PID_TERRATEC_CINERGY_HT_USB_XE 0x0058 #define USB_PID_TERRATEC_CINERGY_HT_EXPRESS 0x0060 +#define USB_PID_TERRATEC_CINERGY_T_EXPRESS 0x0062 #define USB_PID_TERRATEC_CINERGY_T_XXS 0x0078 #define USB_PID_PINNACLE_EXPRESSCARD_320CX 0x022e #define USB_PID_PINNACLE_PCTV2000E 0x022c -- cgit v1.2.1 From 2c2d264bb951c1a846b86431d3e784edfb79ab39 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sat, 3 Jan 2009 19:12:40 -0300 Subject: V4L/DVB (10197): uvcvideo: Whitespace and comments cleanup, copyright updates. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_ctrl.c | 6 +- drivers/media/video/uvc/uvc_driver.c | 52 ++++---- drivers/media/video/uvc/uvc_isight.c | 2 + drivers/media/video/uvc/uvc_queue.c | 30 ++--- drivers/media/video/uvc/uvc_status.c | 2 +- drivers/media/video/uvc/uvc_v4l2.c | 10 +- drivers/media/video/uvc/uvc_video.c | 28 +++-- drivers/media/video/uvc/uvcvideo.h | 232 +++++++++++++++++------------------ 8 files changed, 184 insertions(+), 178 deletions(-) diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c index c506068bec61..d2576f6391c0 100644 --- a/drivers/media/video/uvc/uvc_ctrl.c +++ b/drivers/media/video/uvc/uvc_ctrl.c @@ -1,7 +1,7 @@ /* * uvc_ctrl.c -- USB Video Class driver - Controls * - * Copyright (C) 2005-2008 + * Copyright (C) 2005-2009 * Laurent Pinchart (laurent.pinchart@skynet.be) * * This program is free software; you can redistribute it and/or modify @@ -28,7 +28,7 @@ #define UVC_CTRL_DATA_BACKUP 1 /* ------------------------------------------------------------------------ - * Control, formats, ... + * Controls */ static struct uvc_control_info uvc_ctrls[] = { @@ -634,7 +634,7 @@ static __s32 uvc_get_le_value(struct uvc_control_mapping *mapping, mask = (1 << bits) - 1; } - /* Sign-extend the value if needed */ + /* Sign-extend the value if needed. */ if (mapping->data_type == UVC_CTRL_DATA_TYPE_SIGNED) value |= -(value & (1 << (mapping->size - 1))); diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c index a0537464987e..20c16c4a62d1 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/video/uvc/uvc_driver.c @@ -1,7 +1,7 @@ /* * uvc_driver.c -- USB Video Class driver * - * Copyright (C) 2005-2008 + * Copyright (C) 2005-2009 * Laurent Pinchart (laurent.pinchart@skynet.be) * * This program is free software; you can redistribute it and/or modify @@ -48,7 +48,7 @@ static unsigned int uvc_quirks_param; unsigned int uvc_trace_param; /* ------------------------------------------------------------------------ - * Control, formats, ... + * Video formats */ static struct uvc_format_desc uvc_fmts[] = { @@ -473,7 +473,7 @@ static int uvc_parse_format(struct uvc_device *dev, /* Several UVC chipsets screw up dwMaxVideoFrameBufferSize * completely. Observed behaviours range from setting the - * value to 1.1x the actual frame size of hardwiring the + * value to 1.1x the actual frame size to hardwiring the * 16 low bits to 0. This results in a higher than necessary * memory usage as well as a wrong image size information. For * uncompressed formats this can be fixed by computing the @@ -486,7 +486,7 @@ static int uvc_parse_format(struct uvc_device *dev, /* Some bogus devices report dwMinFrameInterval equal to * dwMaxFrameInterval and have dwFrameIntervalStep set to * zero. Setting all null intervals to 1 fixes the problem and - * some other divisions by zero which could happen. + * some other divisions by zero that could happen. */ for (i = 0; i < n; ++i) { interval = get_unaligned_le32(&buffer[26+4*i]); @@ -1199,13 +1199,13 @@ static void uvc_unregister_video(struct uvc_device *dev) * Scan the UVC descriptors to locate a chain starting at an Output Terminal * and containing the following units: * - * - a USB Streaming Output Terminal + * - one Output Terminal (USB Streaming or Display) * - zero or one Processing Unit * - zero, one or mode single-input Selector Units * - zero or one multiple-input Selector Units, provided all inputs are * connected to input terminals * - zero, one or mode single-input Extension Units - * - one Camera Input Terminal, or one or more External terminals. + * - one or more Input Terminals (Camera, External or USB Streaming) * * A side forward scan is made on each detected entity to check for additional * extension units. @@ -1530,10 +1530,6 @@ static int uvc_register_video(struct uvc_device *dev) /* Set the driver data before calling video_register_device, otherwise * uvc_v4l2_open might race us. - * - * FIXME: usb_set_intfdata hasn't been called so far. Is that a - * problem ? Does any function which could be called here get - * a pointer to the usb_interface ? */ dev->video.vdev = vdev; video_set_drvdata(vdev, &dev->video); @@ -1568,7 +1564,7 @@ void uvc_delete(struct kref *kref) struct uvc_device *dev = container_of(kref, struct uvc_device, kref); struct list_head *p, *n; - /* Unregister the video device */ + /* Unregister the video device. */ uvc_unregister_video(dev); usb_put_intf(dev->intf); usb_put_dev(dev->udev); @@ -1611,7 +1607,7 @@ static int uvc_probe(struct usb_interface *intf, uvc_trace(UVC_TRACE_PROBE, "Probing generic UVC device %s\n", udev->devpath); - /* Allocate memory for the device and initialize it */ + /* Allocate memory for the device and initialize it. */ if ((dev = kzalloc(sizeof *dev, GFP_KERNEL)) == NULL) return -ENOMEM; @@ -1632,7 +1628,7 @@ static int uvc_probe(struct usb_interface *intf, le16_to_cpu(udev->descriptor.idVendor), le16_to_cpu(udev->descriptor.idProduct)); - /* Parse the Video Class control descriptor */ + /* Parse the Video Class control descriptor. */ if (uvc_parse_control(dev) < 0) { uvc_trace(UVC_TRACE_PROBE, "Unable to parse UVC " "descriptors.\n"); @@ -1652,18 +1648,18 @@ static int uvc_probe(struct usb_interface *intf, "linux-uvc-devel mailing list.\n"); } - /* Initialize controls */ + /* Initialize controls. */ if (uvc_ctrl_init_device(dev) < 0) goto error; - /* Register the video devices */ + /* Register the video devices. */ if (uvc_register_video(dev) < 0) goto error; - /* Save our data pointer in the interface data */ + /* Save our data pointer in the interface data. */ usb_set_intfdata(intf, dev); - /* Initialize the interrupt URB */ + /* Initialize the interrupt URB. */ if ((ret = uvc_status_init(dev)) < 0) { uvc_printk(KERN_INFO, "Unable to initialize the status " "endpoint (%d), status interrupt will not be " @@ -1838,24 +1834,24 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0 }, /* Apple Built-In iSight */ - { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, .idVendor = 0x05ac, .idProduct = 0x8501, - .bInterfaceClass = USB_CLASS_VIDEO, - .bInterfaceSubClass = 1, - .bInterfaceProtocol = 0, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_PROBE_MINMAX | UVC_QUIRK_BUILTIN_ISIGHT }, /* Genesys Logic USB 2.0 PC Camera */ - { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x05e3, - .idProduct = 0x0505, - .bInterfaceClass = USB_CLASS_VIDEO, - .bInterfaceSubClass = 1, - .bInterfaceProtocol = 0, - .driver_info = UVC_QUIRK_STREAM_NO_FID }, + .idVendor = 0x05e3, + .idProduct = 0x0505, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_STREAM_NO_FID }, /* MT6227 */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, diff --git a/drivers/media/video/uvc/uvc_isight.c b/drivers/media/video/uvc/uvc_isight.c index 37bdefdbead5..436f462685a0 100644 --- a/drivers/media/video/uvc/uvc_isight.c +++ b/drivers/media/video/uvc/uvc_isight.c @@ -3,6 +3,8 @@ * * Copyright (C) 2006-2007 * Ivan N. Zlatev + * Copyright (C) 2008-2009 + * Laurent Pinchart * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c index 8f676f9d9e39..0155752e4a5a 100644 --- a/drivers/media/video/uvc/uvc_queue.c +++ b/drivers/media/video/uvc/uvc_queue.c @@ -1,7 +1,7 @@ /* * uvc_queue.c -- USB Video Class driver - Buffers management * - * Copyright (C) 2005-2008 + * Copyright (C) 2005-2009 * Laurent Pinchart (laurent.pinchart@skynet.be) * * This program is free software; you can redistribute it and/or modify @@ -36,22 +36,22 @@ * to user space will return -EBUSY. * * Video buffers are managed using two queues. However, unlike most USB video - * drivers which use an in queue and an out queue, we use a main queue which - * holds all queued buffers (both 'empty' and 'done' buffers), and an irq - * queue which holds empty buffers. This design (copied from video-buf) - * minimizes locking in interrupt, as only one queue is shared between - * interrupt and user contexts. + * drivers that use an in queue and an out queue, we use a main queue to hold + * all queued buffers (both 'empty' and 'done' buffers), and an irq queue to + * hold empty buffers. This design (copied from video-buf) minimizes locking + * in interrupt, as only one queue is shared between interrupt and user + * contexts. * * Use cases * --------- * - * Unless stated otherwise, all operations which modify the irq buffers queue + * Unless stated otherwise, all operations that modify the irq buffers queue * are protected by the irq spinlock. * * 1. The user queues the buffers, starts streaming and dequeues a buffer. * * The buffers are added to the main and irq queues. Both operations are - * protected by the queue lock, and the latert is protected by the irq + * protected by the queue lock, and the later is protected by the irq * spinlock as well. * * The completion handler fetches a buffer from the irq queue and fills it @@ -59,7 +59,7 @@ * returns immediately. * * When the buffer is full, the completion handler removes it from the irq - * queue, marks it as ready (UVC_BUF_STATE_DONE) and wake its wait queue. + * queue, marks it as ready (UVC_BUF_STATE_DONE) and wakes its wait queue. * At that point, any process waiting on the buffer will be woken up. If a * process tries to dequeue a buffer after it has been marked ready, the * dequeing will succeed immediately. @@ -90,8 +90,8 @@ void uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type) /* * Allocate the video buffers. * - * Pages are reserved to make sure they will not be swaped, as they will be - * filled in URB completion handler. + * Pages are reserved to make sure they will not be swapped, as they will be + * filled in the URB completion handler. * * Buffers will be individually mapped, so they must all be page aligned. */ @@ -209,8 +209,8 @@ int uvc_query_buffer(struct uvc_video_queue *queue, __uvc_query_buffer(&queue->buffer[v4l2_buf->index], v4l2_buf); done: - mutex_unlock(&queue->mutex); - return ret; + mutex_unlock(&queue->mutex); + return ret; } /* @@ -235,7 +235,7 @@ int uvc_queue_buffer(struct uvc_video_queue *queue, } mutex_lock(&queue->mutex); - if (v4l2_buf->index >= queue->count) { + if (v4l2_buf->index >= queue->count) { uvc_trace(UVC_TRACE_CAPTURE, "[E] Out of range index.\n"); ret = -EINVAL; goto done; @@ -428,7 +428,7 @@ done: * Cancel the video buffers queue. * * Cancelling the queue marks all buffers on the irq queue as erroneous, - * wakes them up and remove them from the queue. + * wakes them up and removes them from the queue. * * If the disconnect parameter is set, further calls to uvc_queue_buffer will * fail with -ENODEV. diff --git a/drivers/media/video/uvc/uvc_status.c b/drivers/media/video/uvc/uvc_status.c index b482f4fc7b31..c1e4ae27c613 100644 --- a/drivers/media/video/uvc/uvc_status.c +++ b/drivers/media/video/uvc/uvc_status.c @@ -1,7 +1,7 @@ /* * uvc_status.c -- USB Video Class driver - Status endpoint * - * Copyright (C) 2007-2008 + * Copyright (C) 2007-2009 * Laurent Pinchart (laurent.pinchart@skynet.be) * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c index fa150fff2c10..d681519d0c8a 100644 --- a/drivers/media/video/uvc/uvc_v4l2.c +++ b/drivers/media/video/uvc/uvc_v4l2.c @@ -1,7 +1,7 @@ /* * uvc_v4l2.c -- USB Video Class driver - V4L2 API * - * Copyright (C) 2005-2008 + * Copyright (C) 2005-2009 * Laurent Pinchart (laurent.pinchart@skynet.be) * * This program is free software; you can redistribute it and/or modify @@ -37,7 +37,7 @@ * must be grouped (for instance the Red Balance, Blue Balance and Do White * Balance V4L2 controls use the White Balance Component UVC control) or * otherwise translated. The approach we take here is to use a translation - * table for the controls which can be mapped directly, and handle the others + * table for the controls that can be mapped directly, and handle the others * manually. */ static int uvc_v4l2_query_menu(struct uvc_video_device *video, @@ -189,7 +189,7 @@ static int uvc_v4l2_try_format(struct uvc_video_device *video, probe->dwMaxVideoFrameSize = video->streaming->ctrl.dwMaxVideoFrameSize; - /* Probe the device */ + /* Probe the device. */ if ((ret = uvc_probe_video(video, probe)) < 0) goto done; @@ -354,11 +354,11 @@ static int uvc_v4l2_set_streamparm(struct uvc_video_device *video, * * Each open instance of a UVC device can either be in a privileged or * unprivileged state. Only a single instance can be in a privileged state at - * a given time. Trying to perform an operation which requires privileges will + * a given time. Trying to perform an operation that requires privileges will * automatically acquire the required privileges if possible, or return -EBUSY * otherwise. Privileges are dismissed when closing the instance. * - * Operations which require privileges are: + * Operations that require privileges are: * * - VIDIOC_S_INPUT * - VIDIOC_S_PARM diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index 6e9e30f174a1..f9eb0e974051 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -1,7 +1,7 @@ /* * uvc_video.c -- USB Video Class driver - Video handling * - * Copyright (C) 2005-2008 + * Copyright (C) 2005-2009 * Laurent Pinchart (laurent.pinchart@skynet.be) * * This program is free software; you can redistribute it and/or modify @@ -159,7 +159,7 @@ static int uvc_get_video_ctrl(struct uvc_video_device *video, } /* Some broken devices return a null or wrong dwMaxVideoFrameSize. - * Try to get the value from the format and frame descriptor. + * Try to get the value from the format and frame descriptors. */ uvc_fixup_buffer_size(video, ctrl); ret = 0; @@ -190,9 +190,6 @@ static int uvc_set_video_ctrl(struct uvc_video_device *video, *(__le16 *)&data[12] = cpu_to_le16(ctrl->wCompQuality); *(__le16 *)&data[14] = cpu_to_le16(ctrl->wCompWindowSize); *(__le16 *)&data[16] = cpu_to_le16(ctrl->wDelay); - /* Note: Some of the fields below are not required for IN devices (see - * UVC spec, 4.3.1.1), but we still copy them in case support for OUT - * devices is added in the future. */ put_unaligned_le32(ctrl->dwMaxVideoFrameSize, &data[18]); put_unaligned_le32(ctrl->dwMaxPayloadTransferSize, &data[22]); @@ -399,7 +396,7 @@ static int uvc_video_decode_start(struct uvc_video_device *video, * * Empty buffers (bytesused == 0) don't trigger end of frame detection * as it doesn't make sense to return an empty buffer. This also - * avoids detecting and of frame conditions at FID toggling if the + * avoids detecting end of frame conditions at FID toggling if the * previous payload had the EOF bit set. */ if (fid != video->last_fid && buf->buf.bytesused != 0) { @@ -452,6 +449,17 @@ static void uvc_video_decode_end(struct uvc_video_device *video, } } +/* Video payload encoding is handled by uvc_video_encode_header() and + * uvc_video_encode_data(). Only bulk transfers are currently supported. + * + * uvc_video_encode_header is called at the start of a payload. It adds header + * data to the transfer buffer and returns the header size. As the only known + * UVC output device transfers a whole frame in a single payload, the EOF bit + * is always set in the header. + * + * uvc_video_encode_data is called for every URB and copies the data from the + * video buffer to the transfer buffer. + */ static int uvc_video_encode_header(struct uvc_video_device *video, struct uvc_buffer *buf, __u8 *data, int len) { @@ -952,7 +960,7 @@ int uvc_video_suspend(struct uvc_video_device *video) } /* - * Reconfigure the video interface and restart streaming if it was enable + * Reconfigure the video interface and restart streaming if it was enabled * before suspend. * * If an error occurs, disable the video queue. This will wake all pending @@ -984,8 +992,8 @@ int uvc_video_resume(struct uvc_video_device *video) */ /* - * Initialize the UVC video device by retrieving the default format and - * committing it. + * Initialize the UVC video device by switching to alternate setting 0 and + * retrieve the default format. * * Some cameras (namely the Fuji Finepix) set the format and frame * indexes to zero. The UVC standard doesn't clearly make this a spec @@ -1013,7 +1021,7 @@ int uvc_video_init(struct uvc_video_device *video) */ usb_set_interface(video->dev->udev, video->streaming->intfnum, 0); - /* Some webcams don't suport GET_DEF request on the probe control. We + /* Some webcams don't suport GET_DEF requests on the probe control. We * fall back to GET_CUR if GET_DEF fails. */ if ((ret = uvc_get_video_ctrl(video, probe, 1, GET_DEF)) < 0 && diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h index bcf4361dc1bc..027947ea9b6e 100644 --- a/drivers/media/video/uvc/uvcvideo.h +++ b/drivers/media/video/uvc/uvcvideo.h @@ -72,149 +72,149 @@ struct uvc_xu_control { * UVC constants */ -#define SC_UNDEFINED 0x00 -#define SC_VIDEOCONTROL 0x01 -#define SC_VIDEOSTREAMING 0x02 -#define SC_VIDEO_INTERFACE_COLLECTION 0x03 +#define SC_UNDEFINED 0x00 +#define SC_VIDEOCONTROL 0x01 +#define SC_VIDEOSTREAMING 0x02 +#define SC_VIDEO_INTERFACE_COLLECTION 0x03 -#define PC_PROTOCOL_UNDEFINED 0x00 +#define PC_PROTOCOL_UNDEFINED 0x00 -#define CS_UNDEFINED 0x20 -#define CS_DEVICE 0x21 -#define CS_CONFIGURATION 0x22 -#define CS_STRING 0x23 -#define CS_INTERFACE 0x24 -#define CS_ENDPOINT 0x25 +#define CS_UNDEFINED 0x20 +#define CS_DEVICE 0x21 +#define CS_CONFIGURATION 0x22 +#define CS_STRING 0x23 +#define CS_INTERFACE 0x24 +#define CS_ENDPOINT 0x25 /* VideoControl class specific interface descriptor */ -#define VC_DESCRIPTOR_UNDEFINED 0x00 -#define VC_HEADER 0x01 -#define VC_INPUT_TERMINAL 0x02 -#define VC_OUTPUT_TERMINAL 0x03 -#define VC_SELECTOR_UNIT 0x04 -#define VC_PROCESSING_UNIT 0x05 -#define VC_EXTENSION_UNIT 0x06 +#define VC_DESCRIPTOR_UNDEFINED 0x00 +#define VC_HEADER 0x01 +#define VC_INPUT_TERMINAL 0x02 +#define VC_OUTPUT_TERMINAL 0x03 +#define VC_SELECTOR_UNIT 0x04 +#define VC_PROCESSING_UNIT 0x05 +#define VC_EXTENSION_UNIT 0x06 /* VideoStreaming class specific interface descriptor */ -#define VS_UNDEFINED 0x00 -#define VS_INPUT_HEADER 0x01 -#define VS_OUTPUT_HEADER 0x02 -#define VS_STILL_IMAGE_FRAME 0x03 -#define VS_FORMAT_UNCOMPRESSED 0x04 -#define VS_FRAME_UNCOMPRESSED 0x05 -#define VS_FORMAT_MJPEG 0x06 -#define VS_FRAME_MJPEG 0x07 -#define VS_FORMAT_MPEG2TS 0x0a -#define VS_FORMAT_DV 0x0c -#define VS_COLORFORMAT 0x0d -#define VS_FORMAT_FRAME_BASED 0x10 -#define VS_FRAME_FRAME_BASED 0x11 -#define VS_FORMAT_STREAM_BASED 0x12 +#define VS_UNDEFINED 0x00 +#define VS_INPUT_HEADER 0x01 +#define VS_OUTPUT_HEADER 0x02 +#define VS_STILL_IMAGE_FRAME 0x03 +#define VS_FORMAT_UNCOMPRESSED 0x04 +#define VS_FRAME_UNCOMPRESSED 0x05 +#define VS_FORMAT_MJPEG 0x06 +#define VS_FRAME_MJPEG 0x07 +#define VS_FORMAT_MPEG2TS 0x0a +#define VS_FORMAT_DV 0x0c +#define VS_COLORFORMAT 0x0d +#define VS_FORMAT_FRAME_BASED 0x10 +#define VS_FRAME_FRAME_BASED 0x11 +#define VS_FORMAT_STREAM_BASED 0x12 /* Endpoint type */ -#define EP_UNDEFINED 0x00 -#define EP_GENERAL 0x01 -#define EP_ENDPOINT 0x02 -#define EP_INTERRUPT 0x03 +#define EP_UNDEFINED 0x00 +#define EP_GENERAL 0x01 +#define EP_ENDPOINT 0x02 +#define EP_INTERRUPT 0x03 /* Request codes */ -#define RC_UNDEFINED 0x00 -#define SET_CUR 0x01 -#define GET_CUR 0x81 -#define GET_MIN 0x82 -#define GET_MAX 0x83 -#define GET_RES 0x84 -#define GET_LEN 0x85 -#define GET_INFO 0x86 -#define GET_DEF 0x87 +#define RC_UNDEFINED 0x00 +#define SET_CUR 0x01 +#define GET_CUR 0x81 +#define GET_MIN 0x82 +#define GET_MAX 0x83 +#define GET_RES 0x84 +#define GET_LEN 0x85 +#define GET_INFO 0x86 +#define GET_DEF 0x87 /* VideoControl interface controls */ -#define VC_CONTROL_UNDEFINED 0x00 -#define VC_VIDEO_POWER_MODE_CONTROL 0x01 -#define VC_REQUEST_ERROR_CODE_CONTROL 0x02 +#define VC_CONTROL_UNDEFINED 0x00 +#define VC_VIDEO_POWER_MODE_CONTROL 0x01 +#define VC_REQUEST_ERROR_CODE_CONTROL 0x02 /* Terminal controls */ -#define TE_CONTROL_UNDEFINED 0x00 +#define TE_CONTROL_UNDEFINED 0x00 /* Selector Unit controls */ -#define SU_CONTROL_UNDEFINED 0x00 -#define SU_INPUT_SELECT_CONTROL 0x01 +#define SU_CONTROL_UNDEFINED 0x00 +#define SU_INPUT_SELECT_CONTROL 0x01 /* Camera Terminal controls */ -#define CT_CONTROL_UNDEFINED 0x00 -#define CT_SCANNING_MODE_CONTROL 0x01 -#define CT_AE_MODE_CONTROL 0x02 -#define CT_AE_PRIORITY_CONTROL 0x03 -#define CT_EXPOSURE_TIME_ABSOLUTE_CONTROL 0x04 -#define CT_EXPOSURE_TIME_RELATIVE_CONTROL 0x05 -#define CT_FOCUS_ABSOLUTE_CONTROL 0x06 -#define CT_FOCUS_RELATIVE_CONTROL 0x07 -#define CT_FOCUS_AUTO_CONTROL 0x08 -#define CT_IRIS_ABSOLUTE_CONTROL 0x09 -#define CT_IRIS_RELATIVE_CONTROL 0x0a -#define CT_ZOOM_ABSOLUTE_CONTROL 0x0b -#define CT_ZOOM_RELATIVE_CONTROL 0x0c -#define CT_PANTILT_ABSOLUTE_CONTROL 0x0d -#define CT_PANTILT_RELATIVE_CONTROL 0x0e -#define CT_ROLL_ABSOLUTE_CONTROL 0x0f -#define CT_ROLL_RELATIVE_CONTROL 0x10 -#define CT_PRIVACY_CONTROL 0x11 +#define CT_CONTROL_UNDEFINED 0x00 +#define CT_SCANNING_MODE_CONTROL 0x01 +#define CT_AE_MODE_CONTROL 0x02 +#define CT_AE_PRIORITY_CONTROL 0x03 +#define CT_EXPOSURE_TIME_ABSOLUTE_CONTROL 0x04 +#define CT_EXPOSURE_TIME_RELATIVE_CONTROL 0x05 +#define CT_FOCUS_ABSOLUTE_CONTROL 0x06 +#define CT_FOCUS_RELATIVE_CONTROL 0x07 +#define CT_FOCUS_AUTO_CONTROL 0x08 +#define CT_IRIS_ABSOLUTE_CONTROL 0x09 +#define CT_IRIS_RELATIVE_CONTROL 0x0a +#define CT_ZOOM_ABSOLUTE_CONTROL 0x0b +#define CT_ZOOM_RELATIVE_CONTROL 0x0c +#define CT_PANTILT_ABSOLUTE_CONTROL 0x0d +#define CT_PANTILT_RELATIVE_CONTROL 0x0e +#define CT_ROLL_ABSOLUTE_CONTROL 0x0f +#define CT_ROLL_RELATIVE_CONTROL 0x10 +#define CT_PRIVACY_CONTROL 0x11 /* Processing Unit controls */ -#define PU_CONTROL_UNDEFINED 0x00 -#define PU_BACKLIGHT_COMPENSATION_CONTROL 0x01 -#define PU_BRIGHTNESS_CONTROL 0x02 -#define PU_CONTRAST_CONTROL 0x03 -#define PU_GAIN_CONTROL 0x04 -#define PU_POWER_LINE_FREQUENCY_CONTROL 0x05 -#define PU_HUE_CONTROL 0x06 -#define PU_SATURATION_CONTROL 0x07 -#define PU_SHARPNESS_CONTROL 0x08 -#define PU_GAMMA_CONTROL 0x09 -#define PU_WHITE_BALANCE_TEMPERATURE_CONTROL 0x0a -#define PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL 0x0b -#define PU_WHITE_BALANCE_COMPONENT_CONTROL 0x0c -#define PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL 0x0d -#define PU_DIGITAL_MULTIPLIER_CONTROL 0x0e -#define PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL 0x0f -#define PU_HUE_AUTO_CONTROL 0x10 -#define PU_ANALOG_VIDEO_STANDARD_CONTROL 0x11 -#define PU_ANALOG_LOCK_STATUS_CONTROL 0x12 +#define PU_CONTROL_UNDEFINED 0x00 +#define PU_BACKLIGHT_COMPENSATION_CONTROL 0x01 +#define PU_BRIGHTNESS_CONTROL 0x02 +#define PU_CONTRAST_CONTROL 0x03 +#define PU_GAIN_CONTROL 0x04 +#define PU_POWER_LINE_FREQUENCY_CONTROL 0x05 +#define PU_HUE_CONTROL 0x06 +#define PU_SATURATION_CONTROL 0x07 +#define PU_SHARPNESS_CONTROL 0x08 +#define PU_GAMMA_CONTROL 0x09 +#define PU_WHITE_BALANCE_TEMPERATURE_CONTROL 0x0a +#define PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL 0x0b +#define PU_WHITE_BALANCE_COMPONENT_CONTROL 0x0c +#define PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL 0x0d +#define PU_DIGITAL_MULTIPLIER_CONTROL 0x0e +#define PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL 0x0f +#define PU_HUE_AUTO_CONTROL 0x10 +#define PU_ANALOG_VIDEO_STANDARD_CONTROL 0x11 +#define PU_ANALOG_LOCK_STATUS_CONTROL 0x12 #define LXU_MOTOR_PANTILT_RELATIVE_CONTROL 0x01 #define LXU_MOTOR_PANTILT_RESET_CONTROL 0x02 #define LXU_MOTOR_FOCUS_MOTOR_CONTROL 0x03 /* VideoStreaming interface controls */ -#define VS_CONTROL_UNDEFINED 0x00 -#define VS_PROBE_CONTROL 0x01 -#define VS_COMMIT_CONTROL 0x02 -#define VS_STILL_PROBE_CONTROL 0x03 -#define VS_STILL_COMMIT_CONTROL 0x04 -#define VS_STILL_IMAGE_TRIGGER_CONTROL 0x05 -#define VS_STREAM_ERROR_CODE_CONTROL 0x06 -#define VS_GENERATE_KEY_FRAME_CONTROL 0x07 -#define VS_UPDATE_FRAME_SEGMENT_CONTROL 0x08 -#define VS_SYNC_DELAY_CONTROL 0x09 - -#define TT_VENDOR_SPECIFIC 0x0100 -#define TT_STREAMING 0x0101 +#define VS_CONTROL_UNDEFINED 0x00 +#define VS_PROBE_CONTROL 0x01 +#define VS_COMMIT_CONTROL 0x02 +#define VS_STILL_PROBE_CONTROL 0x03 +#define VS_STILL_COMMIT_CONTROL 0x04 +#define VS_STILL_IMAGE_TRIGGER_CONTROL 0x05 +#define VS_STREAM_ERROR_CODE_CONTROL 0x06 +#define VS_GENERATE_KEY_FRAME_CONTROL 0x07 +#define VS_UPDATE_FRAME_SEGMENT_CONTROL 0x08 +#define VS_SYNC_DELAY_CONTROL 0x09 + +#define TT_VENDOR_SPECIFIC 0x0100 +#define TT_STREAMING 0x0101 /* Input Terminal types */ -#define ITT_VENDOR_SPECIFIC 0x0200 -#define ITT_CAMERA 0x0201 -#define ITT_MEDIA_TRANSPORT_INPUT 0x0202 +#define ITT_VENDOR_SPECIFIC 0x0200 +#define ITT_CAMERA 0x0201 +#define ITT_MEDIA_TRANSPORT_INPUT 0x0202 /* Output Terminal types */ -#define OTT_VENDOR_SPECIFIC 0x0300 -#define OTT_DISPLAY 0x0301 -#define OTT_MEDIA_TRANSPORT_OUTPUT 0x0302 +#define OTT_VENDOR_SPECIFIC 0x0300 +#define OTT_DISPLAY 0x0301 +#define OTT_MEDIA_TRANSPORT_OUTPUT 0x0302 /* External Terminal types */ -#define EXTERNAL_VENDOR_SPECIFIC 0x0400 -#define COMPOSITE_CONNECTOR 0x0401 -#define SVIDEO_CONNECTOR 0x0402 -#define COMPONENT_CONNECTOR 0x0403 +#define EXTERNAL_VENDOR_SPECIFIC 0x0400 +#define COMPOSITE_CONNECTOR 0x0401 +#define SVIDEO_CONNECTOR 0x0402 +#define COMPONENT_CONNECTOR 0x0403 #define UVC_TERM_INPUT 0x0000 #define UVC_TERM_OUTPUT 0x8000 @@ -541,11 +541,11 @@ struct uvc_streaming { }; enum uvc_buffer_state { - UVC_BUF_STATE_IDLE = 0, - UVC_BUF_STATE_QUEUED = 1, - UVC_BUF_STATE_ACTIVE = 2, - UVC_BUF_STATE_DONE = 3, - UVC_BUF_STATE_ERROR = 4, + UVC_BUF_STATE_IDLE = 0, + UVC_BUF_STATE_QUEUED = 1, + UVC_BUF_STATE_ACTIVE = 2, + UVC_BUF_STATE_DONE = 3, + UVC_BUF_STATE_ERROR = 4, }; struct uvc_buffer { -- cgit v1.2.1 From fba4578ee925110587ef9b8b6ddfabf2ce288071 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sat, 3 Jan 2009 19:24:38 -0300 Subject: V4L/DVB (10198): uvcvideo: Print the UVC version number in binary-coded decimal. The UVC specification release number is a binary-coded decimal number, print it as such. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c index 20c16c4a62d1..b12873265cc5 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/video/uvc/uvc_driver.c @@ -1635,7 +1635,7 @@ static int uvc_probe(struct usb_interface *intf, goto error; } - uvc_printk(KERN_INFO, "Found UVC %u.%02u device %s (%04x:%04x)\n", + uvc_printk(KERN_INFO, "Found UVC %u.%02x device %s (%04x:%04x)\n", dev->uvc_version >> 8, dev->uvc_version & 0xff, udev->product ? udev->product : "", le16_to_cpu(udev->descriptor.idVendor), -- cgit v1.2.1 From 51cac8ada5caaade4eca0023042ceb01edd82840 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sat, 3 Jan 2009 20:08:26 -0300 Subject: V4L/DVB (10199): uvcvideo: Fix GET_DEF failure detection. Commit 44f0079ec74330b457d990072c13cbe28b0f1abf erroneously considers all GET_DEF requests as unsuccessful. Fix this by checking the request return value. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_video.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index f9eb0e974051..9bc4705be78d 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -114,7 +114,7 @@ static int uvc_get_video_ctrl(struct uvc_video_device *video, ctrl->wCompQuality = le16_to_cpup((__le16 *)data); ret = 0; goto out; - } else if (query == GET_DEF && probe == 1) { + } else if (query == GET_DEF && probe == 1 && ret != size) { /* Many cameras don't support the GET_DEF request on their * video probe control. Warn once and return, the caller will * fall back to GET_CUR. -- cgit v1.2.1 From 77f56279f75b3c1decb4f8a3251b155bb791059e Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 8 Jan 2009 17:13:53 -0300 Subject: V4L/DVB (10201): Fixes cx88 compilation bug Randy Dunlap wrote: > linux-next-20090108/drivers/media/video/cx88/cx88-i2c.c: In function 'cx88_call_i2c_clients': > linux-next-20090108/drivers/media/video/cx88/cx88-i2c.c:122: error: 'struct cx88_core' has no member named 'gate_ctrl' > linux-next-20090108/drivers/media/video/cx88/cx88-i2c.c:123: error: 'struct cx88_core' has no member named 'gate_ctrl' > linux-next-20090108/drivers/media/video/cx88/cx88-i2c.c:127: error: 'struct cx88_core' has no member named 'gate_ctrl' > linux-next-20090108/drivers/media/video/cx88/cx88-i2c.c:128: error: 'struct cx88_core' has no member named 'gate_ctrl' Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index 60a8b3187f14..6025fdd23344 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -336,8 +336,8 @@ struct cx88_core { /* config info -- dvb */ #if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE) int (*prev_set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage); - void (*gate_ctrl)(struct cx88_core *core, int open); #endif + void (*gate_ctrl)(struct cx88_core *core, int open); /* state info */ struct task_struct *kthread; -- cgit v1.2.1 From 0c37dd7a9052529cd9346b04530be7878c03e429 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Thu, 8 Jan 2009 12:49:17 -0300 Subject: V4L/DVB (10202): [PATCH] v4l/tvp514x: Don't write after line end to avoid: | tvp514x 0-005c: No platform data | !!<3>tvp514x 0-005d: No platform data Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tvp514x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/tvp514x.c b/drivers/media/video/tvp514x.c index ac9aa40d09f6..8e23aa53c29a 100644 --- a/drivers/media/video/tvp514x.c +++ b/drivers/media/video/tvp514x.c @@ -1401,7 +1401,7 @@ tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id) decoder->pdata = client->dev.platform_data; if (!decoder->pdata) { - v4l_err(client, "No platform data\n!!"); + v4l_err(client, "No platform data!!\n"); return -ENODEV; } /* -- cgit v1.2.1 From d7e43844e40e07cadc48f1733b9738659f83b38c Mon Sep 17 00:00:00 2001 From: Matthias Dahl Date: Fri, 26 Sep 2008 06:29:03 -0300 Subject: V4L/DVB (9054): implement proper locking in the dvb ca en50221 driver Concurrent access to a single DVB CA 50221 interface slot is generally discouraged. The underlying drivers (budget-av, budget-ci) do not implement proper locking and thus two transactions could (and do) interfere with on another. This fixes the following problems seen by others and myself: - sudden i/o errors when writing to the ci device which usually would result in an undefined state of the hw and require a software restart - errors about the CAM trying to send a buffer larger than the agreed size usually also resulting in an undefined state of the hw Due the to design of the DVB CA 50221 driver, implementing the locks in the underlying drivers would not be enough and still leave some race conditions, even though they were harder to trigger. Signed-off-by: Matthias Dahl Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-core/dvb_ca_en50221.c | 24 +++++++++++++++++++++--- drivers/media/dvb/dvb-core/dvb_ca_en50221.h | 6 ++++-- 2 files changed, 25 insertions(+), 5 deletions(-) diff --git a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c index 98ee16773ff2..7e3aeaa7370f 100644 --- a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c +++ b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c @@ -93,6 +93,9 @@ struct dvb_ca_slot { /* current state of the CAM */ int slot_state; + /* mutex used for serializing access to one CI slot */ + struct mutex slot_lock; + /* Number of CAMCHANGES that have occurred since last processing */ atomic_t camchange_count; @@ -711,14 +714,20 @@ static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot, u8 * b dprintk("%s\n", __func__); - // sanity check + /* sanity check */ if (bytes_write > ca->slot_info[slot].link_buf_size) return -EINVAL; - /* check if interface is actually waiting for us to read from it, or if a read is in progress */ + /* it is possible we are dealing with a single buffer implementation, + thus if there is data available for read or if there is even a read + already in progress, we do nothing but awake the kernel thread to + process the data if necessary. */ if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0) goto exitnowrite; if (status & (STATUSREG_DA | STATUSREG_RE)) { + if (status & STATUSREG_DA) + dvb_ca_en50221_thread_wakeup(ca); + status = -EAGAIN; goto exitnowrite; } @@ -987,6 +996,8 @@ static int dvb_ca_en50221_thread(void *data) /* go through all the slots processing them */ for (slot = 0; slot < ca->slot_count; slot++) { + mutex_lock(&ca->slot_info[slot].slot_lock); + // check the cam status + deal with CAMCHANGEs while (dvb_ca_en50221_check_camstatus(ca, slot)) { /* clear down an old CI slot if necessary */ @@ -1122,7 +1133,7 @@ static int dvb_ca_en50221_thread(void *data) case DVB_CA_SLOTSTATE_RUNNING: if (!ca->open) - continue; + break; // poll slots for data pktcount = 0; @@ -1146,6 +1157,8 @@ static int dvb_ca_en50221_thread(void *data) } break; } + + mutex_unlock(&ca->slot_info[slot].slot_lock); } } @@ -1181,6 +1194,7 @@ static int dvb_ca_en50221_io_do_ioctl(struct inode *inode, struct file *file, switch (cmd) { case CA_RESET: for (slot = 0; slot < ca->slot_count; slot++) { + mutex_lock(&ca->slot_info[slot].slot_lock); if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_NONE) { dvb_ca_en50221_slot_shutdown(ca, slot); if (ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE) @@ -1188,6 +1202,7 @@ static int dvb_ca_en50221_io_do_ioctl(struct inode *inode, struct file *file, slot, DVB_CA_EN50221_CAMCHANGE_INSERTED); } + mutex_unlock(&ca->slot_info[slot].slot_lock); } ca->next_read_slot = 0; dvb_ca_en50221_thread_wakeup(ca); @@ -1308,7 +1323,9 @@ static ssize_t dvb_ca_en50221_io_write(struct file *file, goto exit; } + mutex_lock(&ca->slot_info[slot].slot_lock); status = dvb_ca_en50221_write_data(ca, slot, fragbuf, fraglen + 2); + mutex_unlock(&ca->slot_info[slot].slot_lock); if (status == (fraglen + 2)) { written = 1; break; @@ -1664,6 +1681,7 @@ int dvb_ca_en50221_init(struct dvb_adapter *dvb_adapter, ca->slot_info[i].slot_state = DVB_CA_SLOTSTATE_NONE; atomic_set(&ca->slot_info[i].camchange_count, 0); ca->slot_info[i].camchange_type = DVB_CA_EN50221_CAMCHANGE_REMOVED; + mutex_init(&ca->slot_info[i].slot_lock); } if (signal_pending(current)) { diff --git a/drivers/media/dvb/dvb-core/dvb_ca_en50221.h b/drivers/media/dvb/dvb-core/dvb_ca_en50221.h index 8467e63ddc0d..7df2e141187a 100644 --- a/drivers/media/dvb/dvb-core/dvb_ca_en50221.h +++ b/drivers/media/dvb/dvb-core/dvb_ca_en50221.h @@ -45,8 +45,10 @@ struct dvb_ca_en50221 { /* the module owning this structure */ struct module* owner; - /* NOTE: the read_*, write_* and poll_slot_status functions must use locks as - * they may be called from several threads at once */ + /* NOTE: the read_*, write_* and poll_slot_status functions will be + * called for different slots concurrently and need to use locks where + * and if appropriate. There will be no concurrent access to one slot. + */ /* functions for accessing attribute memory on the CAM */ int (*read_attribute_mem)(struct dvb_ca_en50221* ca, int slot, int address); -- cgit v1.2.1 From dbdf03b48bd32150b4023ea0dd22f566958b6294 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 8 Jan 2009 23:27:32 -0300 Subject: V4L/DVB (10208): zoran: Re-adds udev entry removed by changeset 60b4bde4 Changeset 60b4bde48b36c0315ef41fd38c339b9c7e68c46f removed an unused struct on zoran driver, when compiled with "Y". However, as pointed by Jean Delvare , this is neeeded when the driver is compiled as a module, since udev relies on it to auto-load the module. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/zoran/zoran_card.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c index 05f39195372e..4e8ecf356ad0 100644 --- a/drivers/media/video/zoran/zoran_card.c +++ b/drivers/media/video/zoran/zoran_card.c @@ -153,6 +153,14 @@ MODULE_DESCRIPTION("Zoran-36057/36067 JPEG codec driver"); MODULE_AUTHOR("Serguei Miridonov"); MODULE_LICENSE("GPL"); +#if (defined(CONFIG_VIDEO_ZORAN_MODULE) && defined(MODULE)) +static struct pci_device_id zr36067_pci_tbl[] = { + {PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36057, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0} +}; +MODULE_DEVICE_TABLE(pci, zr36067_pci_tbl); +#endif int zoran_num; /* number of Buzs in use */ struct zoran *zoran[BUZ_MAX]; -- cgit v1.2.1 From 3e478c06e83efc365e8351bff7b4c569f22e642d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 9 Jan 2009 08:38:47 -0300 Subject: V4L/DVB (10209): tveeprom: Properly initialize tuner type (BZ#11367) If Hauppauge eeprom is corrupted, the driver returns tuner = 0, instead of TUNER_ABSENT. This makes the drivers to initialize tuner, instead of handling the manual parameter. Since the tuner core rejects that a tuner to have their type changed, this breaks the manual tuner override. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tveeprom.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c index 3b0b84c2e451..78277abb733b 100644 --- a/drivers/media/video/tveeprom.c +++ b/drivers/media/video/tveeprom.c @@ -427,6 +427,9 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, const char *t_fmt_name2[8] = { " none", "", "", "", "", "", "", "" }; memset(tvee, 0, sizeof(*tvee)); + tvee->tuner_type = TUNER_ABSENT; + tvee->tuner2_type = TUNER_ABSENT; + done = len = beenhere = 0; /* Different eeprom start offsets for em28xx, cx2388x and cx23418 */ -- cgit v1.2.1 From f90c3c0bdd7a3f16eecf1b077f5e031c44ddb605 Mon Sep 17 00:00:00 2001 From: Simon Harrison Date: Fri, 9 Jan 2009 09:07:07 -0300 Subject: V4L/DVB (10210): Fix a bug on v4lgrab.c v4lgrab breaks the fputc macro on some systems, because of #defined FILE. Also, I also added comments because it was not at all clear that to get gspca cameras to work with this application you need v4l1compat. Signed-off-by: Simon Harrison Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/v4lgrab.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-) diff --git a/Documentation/video4linux/v4lgrab.c b/Documentation/video4linux/v4lgrab.c index 079b628481cf..d6e70bef8ad0 100644 --- a/Documentation/video4linux/v4lgrab.c +++ b/Documentation/video4linux/v4lgrab.c @@ -4,12 +4,21 @@ * * Compile with: * gcc -s -Wall -Wstrict-prototypes v4lgrab.c -o v4lgrab - * Use as: - * v4lgrab >image.ppm + * Use as: + * v4lgrab >image.ppm * * Copyright (C) 1998-05-03, Phil Blundell - * Copied from http://www.tazenda.demon.co.uk/phil/vgrabber.c - * with minor modifications (Dave Forrest, drf5n@virginia.edu). + * Copied from http://www.tazenda.demon.co.uk/phil/vgrabber.c + * with minor modifications (Dave Forrest, drf5n@virginia.edu). + * + * + * For some cameras you may need to pre-load libv4l to perform + * the necessary decompression, e.g.: + * + * export LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so + * ./v4lgrab >image.ppm + * + * see http://hansdegoede.livejournal.com/3636.html for details. * */ @@ -24,7 +33,7 @@ #include #include -#define FILE "/dev/video0" +#define VIDEO_DEV "/dev/video0" /* Stole this from tvset.c */ @@ -90,7 +99,7 @@ int get_brightness_adj(unsigned char *image, long size, int *brightness) { int main(int argc, char ** argv) { - int fd = open(FILE, O_RDONLY), f; + int fd = open(VIDEO_DEV, O_RDONLY), f; struct video_capability cap; struct video_window win; struct video_picture vpic; @@ -100,13 +109,13 @@ int main(int argc, char ** argv) unsigned int i, src_depth; if (fd < 0) { - perror(FILE); + perror(VIDEO_DEV); exit(1); } if (ioctl(fd, VIDIOCGCAP, &cap) < 0) { perror("VIDIOGCAP"); - fprintf(stderr, "(" FILE " not a video4linux device?)\n"); + fprintf(stderr, "(" VIDEO_DEV " not a video4linux device?)\n"); close(fd); exit(1); } -- cgit v1.2.1 From 66aa66ea31371daad562bf22ff245caf707d5d40 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Sun, 11 Jan 2009 12:02:54 -0300 Subject: V4L/DVB (10212): Convert to be a pci driver This is a really old and crufty driver that wasn't using the long established pci driver framework. Signed-off-by: Trent Piepho Acked-by: Jean Delvare [mchehab@redhat.com: Cleaned up a few CodingStyle issues] Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/zoran/zoran_card.c | 596 +++++++++++++++---------------- drivers/media/video/zoran/zoran_card.h | 2 +- drivers/media/video/zoran/zoran_driver.c | 2 +- 3 files changed, 296 insertions(+), 304 deletions(-) diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c index 4e8ecf356ad0..e987d53c2943 100644 --- a/drivers/media/video/zoran/zoran_card.c +++ b/drivers/media/video/zoran/zoran_card.c @@ -153,16 +153,13 @@ MODULE_DESCRIPTION("Zoran-36057/36067 JPEG codec driver"); MODULE_AUTHOR("Serguei Miridonov"); MODULE_LICENSE("GPL"); -#if (defined(CONFIG_VIDEO_ZORAN_MODULE) && defined(MODULE)) static struct pci_device_id zr36067_pci_tbl[] = { - {PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36057, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_DEVICE(PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36057), }, {0} }; MODULE_DEVICE_TABLE(pci, zr36067_pci_tbl); -#endif -int zoran_num; /* number of Buzs in use */ +atomic_t zoran_num = ATOMIC_INIT(0); /* number of Buzs in use */ struct zoran *zoran[BUZ_MAX]; /* videocodec bus functions ZR36060 */ @@ -1146,7 +1143,7 @@ zr36057_init (struct zoran *zr) strcpy(zr->video_dev->name, ZR_DEVNAME(zr)); err = video_register_device(zr->video_dev, VFL_TYPE_GRABBER, video_nr[zr->id]); if (err < 0) - goto exit_unregister; + goto exit_free; zoran_init_hardware(zr); if (zr36067_debug > 2) @@ -1161,19 +1158,19 @@ zr36057_init (struct zoran *zr) zr->initialized = 1; return 0; -exit_unregister: - zoran_unregister_i2c(zr); exit_free: kfree(zr->stat_com); kfree(zr->video_dev); return err; } -static void -zoran_release (struct zoran *zr) +static void __devexit zoran_remove(struct pci_dev *pdev) { + struct zoran *zr = pci_get_drvdata(pdev); + if (!zr->initialized) goto exit_free; + /* unregister videocodec bus */ if (zr->codec) { struct videocodec_master *master = zr->codec->master_data; @@ -1202,6 +1199,7 @@ zoran_release (struct zoran *zr) pci_disable_device(zr->pci_dev); video_unregister_device(zr->video_dev); exit_free: + pci_set_drvdata(pdev, NULL); kfree(zr); } @@ -1264,338 +1262,347 @@ zoran_setup_videocodec (struct zoran *zr, * Scan for a Buz card (actually for the PCI controller ZR36057), * request the irq and map the io memory */ -static int __devinit -find_zr36057 (void) +static int __devinit zoran_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) { unsigned char latency, need_latency; struct zoran *zr; - struct pci_dev *dev = NULL; int result; struct videocodec_master *master_vfe = NULL; struct videocodec_master *master_codec = NULL; int card_num; char *i2c_enc_name, *i2c_dec_name, *codec_name, *vfe_name; + unsigned int nr; - zoran_num = 0; - while (zoran_num < BUZ_MAX && - (dev = pci_get_device(PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36057, dev)) != NULL) { - card_num = card[zoran_num]; - zr = kzalloc(sizeof(struct zoran), GFP_KERNEL); - if (!zr) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - kzalloc failed\n", - ZORAN_NAME); - continue; - } - zr->pci_dev = dev; - //zr->zr36057_mem = NULL; - zr->id = zoran_num; - snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "MJPEG[%u]", zr->id); - spin_lock_init(&zr->spinlock); - mutex_init(&zr->resource_lock); - if (pci_enable_device(dev)) - goto zr_free_mem; - zr->zr36057_adr = pci_resource_start(zr->pci_dev, 0); - pci_read_config_byte(zr->pci_dev, PCI_CLASS_REVISION, - &zr->revision); - if (zr->revision < 2) { - dprintk(1, - KERN_INFO - "%s: Zoran ZR36057 (rev %d) irq: %d, memory: 0x%08x.\n", - ZR_DEVNAME(zr), zr->revision, zr->pci_dev->irq, - zr->zr36057_adr); - if (card_num == -1) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - no card specified, please use the card=X insmod option\n", - ZR_DEVNAME(zr)); - goto zr_free_mem; - } - } else { - int i; - unsigned short ss_vendor, ss_device; - - ss_vendor = zr->pci_dev->subsystem_vendor; - ss_device = zr->pci_dev->subsystem_device; - dprintk(1, - KERN_INFO - "%s: Zoran ZR36067 (rev %d) irq: %d, memory: 0x%08x\n", - ZR_DEVNAME(zr), zr->revision, zr->pci_dev->irq, - zr->zr36057_adr); - dprintk(1, - KERN_INFO - "%s: subsystem vendor=0x%04x id=0x%04x\n", - ZR_DEVNAME(zr), ss_vendor, ss_device); - if (card_num == -1) { - dprintk(3, - KERN_DEBUG - "%s: find_zr36057() - trying to autodetect card type\n", - ZR_DEVNAME(zr)); - for (i=0;i= BUZ_MAX) { + dprintk(1, + KERN_ERR + "%s: driver limited to %d card(s) maximum\n", + ZORAN_NAME, BUZ_MAX); + return -ENOENT; + } - if (card_num < 0 || card_num >= NUM_CARDS) { - dprintk(2, - KERN_ERR - "%s: find_zr36057() - invalid cardnum %d\n", - ZR_DEVNAME(zr), card_num); - goto zr_free_mem; - } + card_num = card[nr]; + zr = kzalloc(sizeof(struct zoran), GFP_KERNEL); + if (!zr) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - kzalloc failed\n", + ZORAN_NAME); + /* The entry in zoran[] gets leaked */ + return -ENOMEM; + } + zr->pci_dev = pdev; + zr->id = nr; + snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "MJPEG[%u]", zr->id); + spin_lock_init(&zr->spinlock); + mutex_init(&zr->resource_lock); + if (pci_enable_device(pdev)) + goto zr_free_mem; + zr->zr36057_adr = pci_resource_start(zr->pci_dev, 0); + pci_read_config_byte(zr->pci_dev, PCI_CLASS_REVISION, &zr->revision); + if (zr->revision < 2) { + dprintk(1, + KERN_INFO + "%s: Zoran ZR36057 (rev %d) irq: %d, memory: 0x%08x.\n", + ZR_DEVNAME(zr), zr->revision, zr->pci_dev->irq, + zr->zr36057_adr); - /* even though we make this a non pointer and thus - * theoretically allow for making changes to this struct - * on a per-individual card basis at runtime, this is - * strongly discouraged. This structure is intended to - * keep general card information, no settings or anything */ - zr->card = zoran_cards[card_num]; - snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), - "%s[%u]", zr->card.name, zr->id); - - zr->zr36057_mem = ioremap_nocache(zr->zr36057_adr, 0x1000); - if (!zr->zr36057_mem) { + if (card_num == -1) { dprintk(1, KERN_ERR - "%s: find_zr36057() - ioremap failed\n", + "%s: find_zr36057() - no card specified, please use the card=X insmod option\n", ZR_DEVNAME(zr)); goto zr_free_mem; } + } else { + int i; + unsigned short ss_vendor, ss_device; - result = request_irq(zr->pci_dev->irq, - zoran_irq, - IRQF_SHARED | IRQF_DISABLED, - ZR_DEVNAME(zr), - (void *) zr); - if (result < 0) { - if (result == -EINVAL) { + ss_vendor = zr->pci_dev->subsystem_vendor; + ss_device = zr->pci_dev->subsystem_device; + dprintk(1, + KERN_INFO + "%s: Zoran ZR36067 (rev %d) irq: %d, memory: 0x%08x\n", + ZR_DEVNAME(zr), zr->revision, zr->pci_dev->irq, + zr->zr36057_adr); + dprintk(1, + KERN_INFO + "%s: subsystem vendor=0x%04x id=0x%04x\n", + ZR_DEVNAME(zr), ss_vendor, ss_device); + if (card_num == -1) { + dprintk(3, + KERN_DEBUG + "%s: find_zr36057() - trying to autodetect card type\n", + ZR_DEVNAME(zr)); + for (i = 0; i < NUM_CARDS; i++) { + if (ss_vendor == zoran_cards[i].vendor_id && + ss_device == zoran_cards[i].device_id) { + dprintk(3, + KERN_DEBUG + "%s: find_zr36057() - card %s detected\n", + ZR_DEVNAME(zr), + zoran_cards[i].name); + card_num = i; + break; + } + } + if (i == NUM_CARDS) { dprintk(1, KERN_ERR - "%s: find_zr36057() - bad irq number or handler\n", + "%s: find_zr36057() - unknown card\n", ZR_DEVNAME(zr)); - } else if (result == -EBUSY) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - IRQ %d busy, change your PnP config in BIOS\n", - ZR_DEVNAME(zr), zr->pci_dev->irq); - } else { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - can't assign irq, error code %d\n", - ZR_DEVNAME(zr), result); + goto zr_free_mem; } - goto zr_unmap; } + } - /* set PCI latency timer */ - pci_read_config_byte(zr->pci_dev, PCI_LATENCY_TIMER, - &latency); - need_latency = zr->revision > 1 ? 32 : 48; - if (latency != need_latency) { - dprintk(2, - KERN_INFO - "%s: Changing PCI latency from %d to %d.\n", - ZR_DEVNAME(zr), latency, need_latency); - pci_write_config_byte(zr->pci_dev, - PCI_LATENCY_TIMER, - need_latency); - } + if (card_num < 0 || card_num >= NUM_CARDS) { + dprintk(2, + KERN_ERR + "%s: find_zr36057() - invalid cardnum %d\n", + ZR_DEVNAME(zr), card_num); + goto zr_free_mem; + } - zr36057_restart(zr); - /* i2c */ - dprintk(2, KERN_INFO "%s: Initializing i2c bus...\n", + /* even though we make this a non pointer and thus + * theoretically allow for making changes to this struct + * on a per-individual card basis at runtime, this is + * strongly discouraged. This structure is intended to + * keep general card information, no settings or anything */ + zr->card = zoran_cards[card_num]; + snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), + "%s[%u]", zr->card.name, zr->id); + + zr->zr36057_mem = ioremap_nocache(zr->zr36057_adr, 0x1000); + if (!zr->zr36057_mem) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - ioremap failed\n", ZR_DEVNAME(zr)); + goto zr_free_mem; + } - /* i2c decoder */ - if (decoder[zr->id] != -1) { - i2c_dec_name = i2cid_to_modulename(decoder[zr->id]); - zr->card.i2c_decoder = decoder[zr->id]; - } else if (zr->card.i2c_decoder != 0) { - i2c_dec_name = - i2cid_to_modulename(zr->card.i2c_decoder); + result = request_irq(zr->pci_dev->irq, zoran_irq, + IRQF_SHARED | IRQF_DISABLED, ZR_DEVNAME(zr), zr); + if (result < 0) { + if (result == -EINVAL) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - bad irq number or handler\n", + ZR_DEVNAME(zr)); + } else if (result == -EBUSY) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - IRQ %d busy, change your PnP config in BIOS\n", + ZR_DEVNAME(zr), zr->pci_dev->irq); } else { - i2c_dec_name = NULL; + dprintk(1, + KERN_ERR + "%s: find_zr36057() - can't assign irq, error code %d\n", + ZR_DEVNAME(zr), result); } + goto zr_unmap; + } - if (i2c_dec_name) { - if ((result = request_module(i2c_dec_name)) < 0) { - dprintk(1, - KERN_ERR - "%s: failed to load module %s: %d\n", - ZR_DEVNAME(zr), i2c_dec_name, result); - } - } + /* set PCI latency timer */ + pci_read_config_byte(zr->pci_dev, PCI_LATENCY_TIMER, + &latency); + need_latency = zr->revision > 1 ? 32 : 48; + if (latency != need_latency) { + dprintk(2, + KERN_INFO + "%s: Changing PCI latency from %d to %d\n", + ZR_DEVNAME(zr), latency, need_latency); + pci_write_config_byte(zr->pci_dev, PCI_LATENCY_TIMER, + need_latency); + } - /* i2c encoder */ - if (encoder[zr->id] != -1) { - i2c_enc_name = i2cid_to_modulename(encoder[zr->id]); - zr->card.i2c_encoder = encoder[zr->id]; - } else if (zr->card.i2c_encoder != 0) { - i2c_enc_name = - i2cid_to_modulename(zr->card.i2c_encoder); - } else { - i2c_enc_name = NULL; - } + zr36057_restart(zr); + /* i2c */ + dprintk(2, KERN_INFO "%s: Initializing i2c bus...\n", + ZR_DEVNAME(zr)); + + /* i2c decoder */ + if (decoder[zr->id] != -1) { + i2c_dec_name = i2cid_to_modulename(decoder[zr->id]); + zr->card.i2c_decoder = decoder[zr->id]; + } else if (zr->card.i2c_decoder != 0) { + i2c_dec_name = i2cid_to_modulename(zr->card.i2c_decoder); + } else { + i2c_dec_name = NULL; + } - if (i2c_enc_name) { - if ((result = request_module(i2c_enc_name)) < 0) { - dprintk(1, - KERN_ERR - "%s: failed to load module %s: %d\n", - ZR_DEVNAME(zr), i2c_enc_name, result); - } + if (i2c_dec_name) { + result = request_module(i2c_dec_name); + if (result < 0) { + dprintk(1, + KERN_ERR + "%s: failed to load module %s: %d\n", + ZR_DEVNAME(zr), i2c_dec_name, result); } + } - if (zoran_register_i2c(zr) < 0) { + /* i2c encoder */ + if (encoder[zr->id] != -1) { + i2c_enc_name = i2cid_to_modulename(encoder[zr->id]); + zr->card.i2c_encoder = encoder[zr->id]; + } else if (zr->card.i2c_encoder != 0) { + i2c_enc_name = i2cid_to_modulename(zr->card.i2c_encoder); + } else { + i2c_enc_name = NULL; + } + + if (i2c_enc_name) { + result = request_module(i2c_enc_name); + if (result < 0) { dprintk(1, KERN_ERR - "%s: find_zr36057() - can't initialize i2c bus\n", - ZR_DEVNAME(zr)); - goto zr_free_irq; + "%s: failed to load module %s: %d\n", + ZR_DEVNAME(zr), i2c_enc_name, result); } + } - dprintk(2, - KERN_INFO "%s: Initializing videocodec bus...\n", + if (zoran_register_i2c(zr) < 0) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - can't initialize i2c bus\n", ZR_DEVNAME(zr)); + goto zr_free_irq; + } - if (zr->card.video_codec != 0 && - (codec_name = - codecid_to_modulename(zr->card.video_codec)) != NULL) { - if ((result = request_module(codec_name)) < 0) { + dprintk(2, + KERN_INFO "%s: Initializing videocodec bus...\n", + ZR_DEVNAME(zr)); + + if (zr->card.video_codec) { + codec_name = codecid_to_modulename(zr->card.video_codec); + if (codec_name) { + result = request_module(codec_name); + if (result) { dprintk(1, KERN_ERR "%s: failed to load modules %s: %d\n", ZR_DEVNAME(zr), codec_name, result); } } - if (zr->card.video_vfe != 0 && - (vfe_name = - codecid_to_modulename(zr->card.video_vfe)) != NULL) { - if ((result = request_module(vfe_name)) < 0) { + } + if (zr->card.video_vfe) { + vfe_name = codecid_to_modulename(zr->card.video_vfe); + if (vfe_name) { + result = request_module(vfe_name); + if (result < 0) { dprintk(1, KERN_ERR "%s: failed to load modules %s: %d\n", ZR_DEVNAME(zr), vfe_name, result); } } + } - /* reset JPEG codec */ - jpeg_codec_sleep(zr, 1); - jpeg_codec_reset(zr); - /* video bus enabled */ - /* display codec revision */ - if (zr->card.video_codec != 0) { - master_codec = zoran_setup_videocodec(zr, - zr->card.video_codec); - if (!master_codec) - goto zr_unreg_i2c; - zr->codec = videocodec_attach(master_codec); - if (!zr->codec) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - no codec found\n", - ZR_DEVNAME(zr)); - goto zr_free_codec; - } - if (zr->codec->type != zr->card.video_codec) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - wrong codec\n", - ZR_DEVNAME(zr)); - goto zr_detach_codec; - } + /* reset JPEG codec */ + jpeg_codec_sleep(zr, 1); + jpeg_codec_reset(zr); + /* video bus enabled */ + /* display codec revision */ + if (zr->card.video_codec != 0) { + master_codec = zoran_setup_videocodec(zr, zr->card.video_codec); + if (!master_codec) + goto zr_unreg_i2c; + zr->codec = videocodec_attach(master_codec); + if (!zr->codec) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - no codec found\n", + ZR_DEVNAME(zr)); + goto zr_free_codec; } - if (zr->card.video_vfe != 0) { - master_vfe = zoran_setup_videocodec(zr, - zr->card.video_vfe); - if (!master_vfe) - goto zr_detach_codec; - zr->vfe = videocodec_attach(master_vfe); - if (!zr->vfe) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - no VFE found\n", - ZR_DEVNAME(zr)); - goto zr_free_vfe; - } - if (zr->vfe->type != zr->card.video_vfe) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() = wrong VFE\n", - ZR_DEVNAME(zr)); - goto zr_detach_vfe; - } + if (zr->codec->type != zr->card.video_codec) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - wrong codec\n", + ZR_DEVNAME(zr)); + goto zr_detach_codec; } - /* Success so keep the pci_dev referenced */ - pci_dev_get(zr->pci_dev); - zoran[zoran_num++] = zr; - continue; - - // Init errors - zr_detach_vfe: - videocodec_detach(zr->vfe); - zr_free_vfe: - kfree(master_vfe); - zr_detach_codec: - videocodec_detach(zr->codec); - zr_free_codec: - kfree(master_codec); - zr_unreg_i2c: - zoran_unregister_i2c(zr); - zr_free_irq: - btwrite(0, ZR36057_SPGPPCR); - free_irq(zr->pci_dev->irq, zr); - zr_unmap: - iounmap(zr->zr36057_mem); - zr_free_mem: - kfree(zr); - continue; } - if (dev) /* Clean up ref count on early exit */ - pci_dev_put(dev); + if (zr->card.video_vfe != 0) { + master_vfe = zoran_setup_videocodec(zr, zr->card.video_vfe); + if (!master_vfe) + goto zr_detach_codec; + zr->vfe = videocodec_attach(master_vfe); + if (!zr->vfe) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - no VFE found\n", + ZR_DEVNAME(zr)); + goto zr_free_vfe; + } + if (zr->vfe->type != zr->card.video_vfe) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() = wrong VFE\n", + ZR_DEVNAME(zr)); + goto zr_detach_vfe; + } + } + zoran[nr] = zr; - if (zoran_num == 0) { - dprintk(1, KERN_INFO "No known MJPEG cards found.\n"); + /* take care of Natoma chipset and a revision 1 zr36057 */ + if ((pci_pci_problems & PCIPCI_NATOMA) && zr->revision <= 1) { + zr->jpg_buffers.need_contiguous = 1; + dprintk(1, + KERN_INFO + "%s: ZR36057/Natoma bug, max. buffer size is 128K\n", + ZR_DEVNAME(zr)); } - return zoran_num; + + if (zr36057_init(zr) < 0) + goto zr_detach_vfe; + + zoran_proc_init(zr); + + pci_set_drvdata(pdev, zr); + + return 0; + +zr_detach_vfe: + videocodec_detach(zr->vfe); +zr_free_vfe: + kfree(master_vfe); +zr_detach_codec: + videocodec_detach(zr->codec); +zr_free_codec: + kfree(master_codec); +zr_unreg_i2c: + zoran_unregister_i2c(zr); +zr_free_irq: + btwrite(0, ZR36057_SPGPPCR); + free_irq(zr->pci_dev->irq, zr); +zr_unmap: + iounmap(zr->zr36057_mem); +zr_free_mem: + kfree(zr); + + return -ENODEV; } -static int __init -init_dc10_cards (void) +static struct pci_driver zoran_driver = { + .name = "zr36067", + .id_table = zr36067_pci_tbl, + .probe = zoran_probe, + .remove = zoran_remove, +}; + +static int __init zoran_init(void) { - int i; + int res; memset(zoran, 0, sizeof(zoran)); printk(KERN_INFO "Zoran MJPEG board driver version %d.%d.%d\n", MAJOR_VERSION, MINOR_VERSION, RELEASE_VERSION); - /* Look for cards */ - if (find_zr36057() < 0) { - return -EIO; - } - if (zoran_num == 0) - return -ENODEV; - dprintk(1, KERN_INFO "%s: %d card(s) found\n", ZORAN_NAME, - zoran_num); /* check the parameters we have been given, adjust if necessary */ if (v4l_nbufs < 2) v4l_nbufs = 2; @@ -1637,37 +1644,22 @@ init_dc10_cards (void) ZORAN_NAME); } - /* take care of Natoma chipset and a revision 1 zr36057 */ - for (i = 0; i < zoran_num; i++) { - struct zoran *zr = zoran[i]; - - if ((pci_pci_problems & PCIPCI_NATOMA) && zr->revision <= 1) { - zr->jpg_buffers.need_contiguous = 1; - dprintk(1, - KERN_INFO - "%s: ZR36057/Natoma bug, max. buffer size is 128K\n", - ZR_DEVNAME(zr)); - } - - if (zr36057_init(zr) < 0) { - for (i = 0; i < zoran_num; i++) - zoran_release(zoran[i]); - return -EIO; - } - zoran_proc_init(zr); + res = pci_register_driver(&zoran_driver); + if (res) { + dprintk(1, + KERN_ERR + "%s: Unable to register ZR36057 driver\n", + ZORAN_NAME); + return res; } return 0; } -static void __exit -unload_dc10_cards (void) +static void __exit zoran_exit(void) { - int i; - - for (i = 0; i < zoran_num; i++) - zoran_release(zoran[i]); + pci_unregister_driver(&zoran_driver); } -module_init(init_dc10_cards); -module_exit(unload_dc10_cards); +module_init(zoran_init); +module_exit(zoran_exit); diff --git a/drivers/media/video/zoran/zoran_card.h b/drivers/media/video/zoran/zoran_card.h index e4dc9d29b404..c989448a77de 100644 --- a/drivers/media/video/zoran/zoran_card.h +++ b/drivers/media/video/zoran/zoran_card.h @@ -40,7 +40,7 @@ extern int zr36067_debug; /* Anybody who uses more than four? */ #define BUZ_MAX 4 -extern int zoran_num; +extern atomic_t zoran_num; extern struct zoran *zoran[BUZ_MAX]; extern struct video_device zoran_template; diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c index b58b9dda715c..5e667fd72725 100644 --- a/drivers/media/video/zoran/zoran_driver.c +++ b/drivers/media/video/zoran/zoran_driver.c @@ -1206,7 +1206,7 @@ zoran_open(struct file *file) lock_kernel(); /* find the device */ - for (i = 0; i < zoran_num; i++) { + for (i = 0; i < atomic_read(&zoran_num); i++) { if (zoran[i]->video_dev->minor == minor) { zr = zoran[i]; break; -- cgit v1.2.1 From 9c17e2ea1e91ed694c3869c860a04507b103f5e6 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 10 Jan 2009 08:31:15 -0300 Subject: V4L/DVB (10214): Fix 'stb0899_get_srate' defined but not used warning Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/stb0899_algo.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/media/dvb/frontends/stb0899_algo.c b/drivers/media/dvb/frontends/stb0899_algo.c index 83dc7e12d5f0..a67d1775a43c 100644 --- a/drivers/media/dvb/frontends/stb0899_algo.c +++ b/drivers/media/dvb/frontends/stb0899_algo.c @@ -31,6 +31,8 @@ inline u32 stb0899_do_div(u64 n, u32 d) return n; } +#if 0 +/* These functions are currently unused */ /* * stb0899_calc_srate * Compute symbol rate @@ -63,6 +65,7 @@ static u32 stb0899_get_srate(struct stb0899_state *state) return stb0899_calc_srate(internal->master_clk, sfr); } +#endif /* * stb0899_set_srate -- cgit v1.2.1 From 0f3559ef17362a7dd5017521a4dd4cad31263395 Mon Sep 17 00:00:00 2001 From: Martin Dauskardt Date: Sat, 10 Jan 2009 10:16:16 -0300 Subject: V4L/DVB (10216): saa7127: fix broken S-Video with saa7129 Register 0x2d has to be set differently in the saa7129 compared to the saa7127. This was not done correctly, so S-Video was broken in certain circumstances. This fixes a regression introduced in 2.6.28. Signed-off-by: Martin Dauskardt Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7127.c | 52 +++++++++++++++++++++++++------------------ 1 file changed, 30 insertions(+), 22 deletions(-) diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c index d6848f7a503b..05221d47dd4c 100644 --- a/drivers/media/video/saa7127.c +++ b/drivers/media/video/saa7127.c @@ -149,7 +149,7 @@ static const struct i2c_reg_value saa7127_init_config_common[] = { { SAA7127_REG_COPYGEN_0, 0x77 }, { SAA7127_REG_COPYGEN_1, 0x41 }, { SAA7127_REG_COPYGEN_2, 0x00 }, /* Macrovision enable/disable */ - { SAA7127_REG_OUTPUT_PORT_CONTROL, 0x9e }, + { SAA7127_REG_OUTPUT_PORT_CONTROL, 0xbf }, { SAA7127_REG_GAIN_LUMINANCE_RGB, 0x00 }, { SAA7127_REG_GAIN_COLORDIFF_RGB, 0x00 }, { SAA7127_REG_INPUT_PORT_CONTROL_1, 0x80 }, /* for color bars */ @@ -488,12 +488,18 @@ static int saa7127_set_output_type(struct v4l2_subdev *sd, int output) break; case SAA7127_OUTPUT_TYPE_COMPOSITE: - state->reg_2d = 0x08; /* 00001000 CVBS only, RGB DAC's off (high impedance mode) */ + if (state->ident == V4L2_IDENT_SAA7129) + state->reg_2d = 0x20; /* CVBS only */ + else + state->reg_2d = 0x08; /* 00001000 CVBS only, RGB DAC's off (high impedance mode) */ state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */ break; case SAA7127_OUTPUT_TYPE_SVIDEO: - state->reg_2d = 0xff; /* 11111111 croma -> R, luma -> CVBS + G + B */ + if (state->ident == V4L2_IDENT_SAA7129) + state->reg_2d = 0x18; /* Y + C */ + else + state->reg_2d = 0xff; /*11111111 croma -> R, luma -> CVBS + G + B */ state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */ break; @@ -508,7 +514,10 @@ static int saa7127_set_output_type(struct v4l2_subdev *sd, int output) break; case SAA7127_OUTPUT_TYPE_BOTH: - state->reg_2d = 0xbf; + if (state->ident == V4L2_IDENT_SAA7129) + state->reg_2d = 0x38; + else + state->reg_2d = 0xbf; state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */ break; @@ -731,24 +740,6 @@ static int saa7127_probe(struct i2c_client *client, return -ENODEV; } - /* Configure Encoder */ - - v4l2_dbg(1, debug, sd, "Configuring encoder\n"); - saa7127_write_inittab(sd, saa7127_init_config_common); - saa7127_set_std(sd, V4L2_STD_NTSC); - saa7127_set_output_type(sd, SAA7127_OUTPUT_TYPE_BOTH); - saa7127_set_vps(sd, &vbi); - saa7127_set_wss(sd, &vbi); - saa7127_set_cc(sd, &vbi); - saa7127_set_xds(sd, &vbi); - if (test_image == 1) - /* The Encoder has an internal Colorbar generator */ - /* This can be used for debugging */ - saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_TEST_IMAGE); - else - saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_NORMAL); - saa7127_set_video_enable(sd, 1); - if (id->driver_data) { /* Chip type is already known */ state->ident = id->driver_data; } else { /* Needs detection */ @@ -770,6 +761,23 @@ static int saa7127_probe(struct i2c_client *client, v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name, client->addr << 1, client->adapter->name); + + v4l2_dbg(1, debug, sd, "Configuring encoder\n"); + saa7127_write_inittab(sd, saa7127_init_config_common); + saa7127_set_std(sd, V4L2_STD_NTSC); + saa7127_set_output_type(sd, SAA7127_OUTPUT_TYPE_BOTH); + saa7127_set_vps(sd, &vbi); + saa7127_set_wss(sd, &vbi); + saa7127_set_cc(sd, &vbi); + saa7127_set_xds(sd, &vbi); + if (test_image == 1) + /* The Encoder has an internal Colorbar generator */ + /* This can be used for debugging */ + saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_TEST_IMAGE); + else + saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_NORMAL); + saa7127_set_video_enable(sd, 1); + if (state->ident == V4L2_IDENT_SAA7129) saa7127_write_inittab(sd, saa7129_init_config_extra); return 0; -- cgit v1.2.1 From cd8f894eacf13996d920fdd2aef1afc55156b191 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Fri, 9 Jan 2009 22:59:27 -0300 Subject: V4L/DVB (10218): cx23885: Fix Oops for mixed install of analog and digital only cards Analog support for HVR-1250 has not been completed, but does exist for the HVR-1800. Since both cards use the same driver, it tries to create the analog dev for both devices, which is not possible. This causes a NULL error to show up in video_open and mpeg_open. -Mark Iterations through the cx23885_devlist must check for NULL pointers as some supported devices only have DVB support at the moment. Mark Jenks encoutered an Oops in a system with both an HVR-1250 and HVR-1800 installed. -Andy Reported-by: Mark Jenks Tested-by: Mark Jenks Signed-off-by: Mark Jenks Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx23885/cx23885-417.c | 3 ++- drivers/media/video/cx23885/cx23885-video.c | 5 +++-- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c index 8f1db57bd1dd..bfe25841dbf4 100644 --- a/drivers/media/video/cx23885/cx23885-417.c +++ b/drivers/media/video/cx23885/cx23885-417.c @@ -1586,7 +1586,8 @@ static int mpeg_open(struct file *file) lock_kernel(); list_for_each(list, &cx23885_devlist) { h = list_entry(list, struct cx23885_dev, devlist); - if (h->v4l_device->minor == minor) { + if (h->v4l_device && + h->v4l_device->minor == minor) { dev = h; break; } diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c index 2d81c4d04340..eaa11893bfe9 100644 --- a/drivers/media/video/cx23885/cx23885-video.c +++ b/drivers/media/video/cx23885/cx23885-video.c @@ -730,12 +730,13 @@ static int video_open(struct file *file) lock_kernel(); list_for_each(list, &cx23885_devlist) { h = list_entry(list, struct cx23885_dev, devlist); - if (h->video_dev->minor == minor) { + if (h->video_dev && + h->video_dev->minor == minor) { dev = h; type = V4L2_BUF_TYPE_VIDEO_CAPTURE; } if (h->vbi_dev && - h->vbi_dev->minor == minor) { + h->vbi_dev->minor == minor) { dev = h; type = V4L2_BUF_TYPE_VBI_CAPTURE; } -- cgit v1.2.1 From 7ef5e025535ee220d7ba45dcd82f05ddce8c3e4c Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sat, 10 Jan 2009 18:04:45 -0300 Subject: V4L/DVB (10219): saa7134: Prevent Oops due to stale IRQ status when enabling interrupts When enabling a shared IRQ line, then saa7134_irq handler could be invoked before the driver had completely set up internal structures, due to a shared interrupt line firing. Clear the saa7134 interrupt status reg, before requesting the irq line, so that stale IRQ status isn't processed before the internal structures are set up. Marcin Slusarz recently brought this Oops to the attention of the v4l-dvb lists and provided an initial analysis by investigating reports found here: http://kerneloops.org/guilty.php?guilty=mute_input_7133&version=2.6.27-release&start=1802240&end=1835007&class=oops Reported-by: Marcin Slusarz Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-core.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index dfbe08a9ad9b..99221d726edb 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -660,6 +660,10 @@ static int saa7134_hwinit1(struct saa7134_dev *dev) saa_writel(SAA7134_IRQ1, 0); saa_writel(SAA7134_IRQ2, 0); + + /* Clear any stale IRQ reports */ + saa_writel(SAA7134_IRQ_REPORT, saa_readl(SAA7134_IRQ_REPORT)); + mutex_init(&dev->lock); spin_lock_init(&dev->slock); -- cgit v1.2.1 From 45bdcefea25cad2d7443f5b45a5319e2bd201048 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Mon, 12 Jan 2009 13:09:46 -0300 Subject: V4L/DVB (10222): zoran: Better syntax for initializing array module params When initializing a module parameter that is a per-card array, use "{ [0 ... (BUZ_MAX-1)] = -1 }" instead of "{ -1, -1, -1, -1 }". This way all of the entries will be correctly set to -1 if someone changes BUZ_MAX to a value other than 4. Adjust some of the parameter help text too. Signed-off-by: Trent Piepho Acked-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/zoran/zoran_card.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c index e987d53c2943..ae96de08759d 100644 --- a/drivers/media/video/zoran/zoran_card.c +++ b/drivers/media/video/zoran/zoran_card.c @@ -61,17 +61,17 @@ extern const struct zoran_format zoran_formats[]; -static int card[BUZ_MAX] = { -1, -1, -1, -1 }; +static int card[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 }; module_param_array(card, int, NULL, 0444); -MODULE_PARM_DESC(card, "The type of card"); +MODULE_PARM_DESC(card, "Card type"); -static int encoder[BUZ_MAX] = { -1, -1, -1, -1 }; +static int encoder[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 }; module_param_array(encoder, int, NULL, 0444); -MODULE_PARM_DESC(encoder, "i2c TV encoder"); +MODULE_PARM_DESC(encoder, "Video encoder chip"); -static int decoder[BUZ_MAX] = { -1, -1, -1, -1 }; +static int decoder[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 }; module_param_array(decoder, int, NULL, 0444); -MODULE_PARM_DESC(decoder, "i2c TV decoder"); +MODULE_PARM_DESC(decoder, "Video decoder chip"); /* The video mem address of the video card. @@ -104,9 +104,9 @@ module_param(default_norm, int, 0444); MODULE_PARM_DESC(default_norm, "Default norm (0=PAL, 1=NTSC, 2=SECAM)"); /* /dev/videoN, -1 for autodetect */ -static int video_nr[BUZ_MAX] = {-1, -1, -1, -1}; +static int video_nr[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 }; module_param_array(video_nr, int, NULL, 0444); -MODULE_PARM_DESC(video_nr, "video device number (-1=Auto)"); +MODULE_PARM_DESC(video_nr, "Video device number (-1=Auto)"); /* Number and size of grab buffers for Video 4 Linux -- cgit v1.2.1 From 601139e08339b15997c6ae638dc5bf42c51ea204 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Mon, 12 Jan 2009 13:09:46 -0300 Subject: V4L/DVB (10223): zoran: Remove global device array The driver was keeping a global array with an entry for each zoran device probed. It was a leftover from when the driver didn't dynamically allocate the driver data for each device. There was only one use left, in the video device's ->open() method, looking up the struct zoran for the opened device from the minor number. This can be done better with video_get_drvdata(). Since zoran_num is now only used in the pci driver's ->probe() method, it doesn't need to be an atomic_t and be static. There is a race if multiple zoran cards could be probed at the same time, but currently the probe method for a given driver is single threaded. Signed-off-by: Trent Piepho Acked-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/zoran/zoran_card.c | 9 +++------ drivers/media/video/zoran/zoran_card.h | 2 -- drivers/media/video/zoran/zoran_driver.c | 25 +++---------------------- 3 files changed, 6 insertions(+), 30 deletions(-) diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c index ae96de08759d..117650fecd89 100644 --- a/drivers/media/video/zoran/zoran_card.c +++ b/drivers/media/video/zoran/zoran_card.c @@ -159,8 +159,7 @@ static struct pci_device_id zr36067_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, zr36067_pci_tbl); -atomic_t zoran_num = ATOMIC_INIT(0); /* number of Buzs in use */ -struct zoran *zoran[BUZ_MAX]; +static unsigned int zoran_num; /* number of cards found */ /* videocodec bus functions ZR36060 */ static u32 @@ -1144,6 +1143,7 @@ zr36057_init (struct zoran *zr) err = video_register_device(zr->video_dev, VFL_TYPE_GRABBER, video_nr[zr->id]); if (err < 0) goto exit_free; + video_set_drvdata(zr->video_dev, zr); zoran_init_hardware(zr); if (zr36067_debug > 2) @@ -1275,7 +1275,7 @@ static int __devinit zoran_probe(struct pci_dev *pdev, unsigned int nr; - nr = atomic_inc_return(&zoran_num) - 1; + nr = zoran_num++; if (nr >= BUZ_MAX) { dprintk(1, KERN_ERR @@ -1291,7 +1291,6 @@ static int __devinit zoran_probe(struct pci_dev *pdev, KERN_ERR "%s: find_zr36057() - kzalloc failed\n", ZORAN_NAME); - /* The entry in zoran[] gets leaked */ return -ENOMEM; } zr->pci_dev = pdev; @@ -1547,7 +1546,6 @@ static int __devinit zoran_probe(struct pci_dev *pdev, goto zr_detach_vfe; } } - zoran[nr] = zr; /* take care of Natoma chipset and a revision 1 zr36057 */ if ((pci_pci_problems & PCIPCI_NATOMA) && zr->revision <= 1) { @@ -1599,7 +1597,6 @@ static int __init zoran_init(void) { int res; - memset(zoran, 0, sizeof(zoran)); printk(KERN_INFO "Zoran MJPEG board driver version %d.%d.%d\n", MAJOR_VERSION, MINOR_VERSION, RELEASE_VERSION); diff --git a/drivers/media/video/zoran/zoran_card.h b/drivers/media/video/zoran/zoran_card.h index c989448a77de..4507bdc5e338 100644 --- a/drivers/media/video/zoran/zoran_card.h +++ b/drivers/media/video/zoran/zoran_card.h @@ -40,8 +40,6 @@ extern int zr36067_debug; /* Anybody who uses more than four? */ #define BUZ_MAX 4 -extern atomic_t zoran_num; -extern struct zoran *zoran[BUZ_MAX]; extern struct video_device zoran_template; diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c index 5e667fd72725..21f37a68714b 100644 --- a/drivers/media/video/zoran/zoran_driver.c +++ b/drivers/media/video/zoran/zoran_driver.c @@ -1196,28 +1196,13 @@ zoran_close_end_session (struct file *file) * Open a zoran card. Right now the flags stuff is just playing */ -static int -zoran_open(struct file *file) +static int zoran_open(struct file *file) { - unsigned int minor = video_devdata(file)->minor; - struct zoran *zr = NULL; + struct zoran *zr = video_drvdata(file); struct zoran_fh *fh; - int i, res, first_open = 0, have_module_locks = 0; + int res, first_open = 0, have_module_locks = 0; lock_kernel(); - /* find the device */ - for (i = 0; i < atomic_read(&zoran_num); i++) { - if (zoran[i]->video_dev->minor == minor) { - zr = zoran[i]; - break; - } - } - - if (!zr) { - dprintk(1, KERN_ERR "%s: device not found!\n", ZORAN_NAME); - res = -ENODEV; - goto open_unlock_and_return; - } /* see fs/device.c - the kernel already locks during open(), * so locking ourselves only causes deadlocks */ @@ -1329,10 +1314,6 @@ open_unlock_and_return: module_put(THIS_MODULE); } - /* if there's no device found, we didn't obtain the lock either */ - if (zr) { - /*mutex_unlock(&zr->resource_lock);*/ - } unlock_kernel(); return res; -- cgit v1.2.1 From 17faeb20912af5d2a1422fdb606e785f9b1d88ba Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Mon, 12 Jan 2009 13:09:46 -0300 Subject: V4L/DVB (10224): zoran: Use pci device table to get card type Instead of using custom code, just let the device layer look it up for us from the pci device table. This requires extending the pci device table to list each known card, plus a catch-all entry for the cards that don't have sub-system vendor/device data. Improve some of the info and error messages too. Signed-off-by: Trent Piepho Acked-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/zoran/zoran.h | 1 - drivers/media/video/zoran/zoran_card.c | 110 ++++++++++++++------------------- 2 files changed, 47 insertions(+), 64 deletions(-) diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h index 46b7ad477ceb..7273abf5eb46 100644 --- a/drivers/media/video/zoran/zoran.h +++ b/drivers/media/video/zoran/zoran.h @@ -349,7 +349,6 @@ struct card_info { u16 i2c_decoder, i2c_encoder; /* I2C types */ u16 video_vfe, video_codec; /* videocodec types */ u16 audio_chip; /* audio type */ - u16 vendor_id, device_id; /* subsystem vendor/device ID */ int inputs; /* number of video inputs */ struct input { diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c index 117650fecd89..7b73d83e1273 100644 --- a/drivers/media/video/zoran/zoran_card.c +++ b/drivers/media/video/zoran/zoran_card.c @@ -153,8 +153,16 @@ MODULE_DESCRIPTION("Zoran-36057/36067 JPEG codec driver"); MODULE_AUTHOR("Serguei Miridonov"); MODULE_LICENSE("GPL"); +#define ZR_DEVICE(subven, subdev, data) { \ + .vendor = PCI_VENDOR_ID_ZORAN, .device = PCI_DEVICE_ID_ZORAN_36057, \ + .subvendor = (subven), .subdevice = (subdev), .driver_data = (data) } + static struct pci_device_id zr36067_pci_tbl[] = { - { PCI_DEVICE(PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36057), }, + ZR_DEVICE(PCI_VENDOR_ID_MIRO, PCI_DEVICE_ID_MIRO_DC10PLUS, DC10plus), + ZR_DEVICE(PCI_VENDOR_ID_MIRO, PCI_DEVICE_ID_MIRO_DC30PLUS, DC30plus), + ZR_DEVICE(PCI_VENDOR_ID_ELECTRONICDESIGNGMBH, PCI_DEVICE_ID_LML_33R10, LML33R10), + ZR_DEVICE(PCI_VENDOR_ID_IOMEGA, PCI_DEVICE_ID_IOMEGA_BUZ, BUZ), + ZR_DEVICE(PCI_ANY_ID, PCI_ANY_ID, NUM_CARDS), {0} }; MODULE_DEVICE_TABLE(pci, zr36067_pci_tbl); @@ -476,8 +484,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { }, { .type = DC10plus, .name = "DC10plus", - .vendor_id = PCI_VENDOR_ID_MIRO, - .device_id = PCI_DEVICE_ID_MIRO_DC10PLUS, .i2c_decoder = I2C_DRIVERID_SAA7110, .i2c_encoder = I2C_DRIVERID_ADV7175, .video_codec = CODEC_TYPE_ZR36060, @@ -535,8 +541,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { }, { .type = DC30plus, .name = "DC30plus", - .vendor_id = PCI_VENDOR_ID_MIRO, - .device_id = PCI_DEVICE_ID_MIRO_DC30PLUS, .i2c_decoder = I2C_DRIVERID_VPX3220, .i2c_encoder = I2C_DRIVERID_ADV7175, .video_codec = CODEC_TYPE_ZR36050, @@ -593,8 +597,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { }, { .type = LML33R10, .name = "LML33R10", - .vendor_id = PCI_VENDOR_ID_ELECTRONICDESIGNGMBH, - .device_id = PCI_DEVICE_ID_LML_33R10, .i2c_decoder = I2C_DRIVERID_SAA7114, .i2c_encoder = I2C_DRIVERID_ADV7170, .video_codec = CODEC_TYPE_ZR36060, @@ -622,8 +624,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { }, { .type = BUZ, .name = "Buz", - .vendor_id = PCI_VENDOR_ID_IOMEGA, - .device_id = PCI_DEVICE_ID_IOMEGA_BUZ, .i2c_decoder = I2C_DRIVERID_SAA7111A, .i2c_encoder = I2C_DRIVERID_SAA7185B, .video_codec = CODEC_TYPE_ZR36060, @@ -653,8 +653,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { .name = "6-Eyes", /* AverMedia chose not to brand the 6-Eyes. Thus it can't be autodetected, and requires card=x. */ - .vendor_id = -1, - .device_id = -1, .i2c_decoder = I2C_DRIVERID_KS0127, .i2c_encoder = I2C_DRIVERID_BT866, .video_codec = CODEC_TYPE_ZR36060, @@ -1284,7 +1282,6 @@ static int __devinit zoran_probe(struct pci_dev *pdev, return -ENOENT; } - card_num = card[nr]; zr = kzalloc(sizeof(struct zoran), GFP_KERNEL); if (!zr) { dprintk(1, @@ -1302,68 +1299,55 @@ static int __devinit zoran_probe(struct pci_dev *pdev, goto zr_free_mem; zr->zr36057_adr = pci_resource_start(zr->pci_dev, 0); pci_read_config_byte(zr->pci_dev, PCI_CLASS_REVISION, &zr->revision); - if (zr->revision < 2) { + + dprintk(1, + KERN_INFO + "%s: Zoran ZR360%c7 (rev %d), irq: %d, memory: 0x%08x\n", + ZR_DEVNAME(zr), zr->revision < 2 ? '5' : '6', zr->revision, + zr->pci_dev->irq, zr->zr36057_adr); + if (zr->revision >= 2) { dprintk(1, KERN_INFO - "%s: Zoran ZR36057 (rev %d) irq: %d, memory: 0x%08x.\n", - ZR_DEVNAME(zr), zr->revision, zr->pci_dev->irq, - zr->zr36057_adr); + "%s: Subsystem vendor=0x%04x id=0x%04x\n", + ZR_DEVNAME(zr), zr->pci_dev->subsystem_vendor, + zr->pci_dev->subsystem_device); + } - if (card_num == -1) { + /* Use auto-detected card type? */ + if (card[nr] == -1) { + if (zr->revision < 2) { + dprintk(1, + KERN_ERR + "%s: No card type specified, please use the card=X module parameter\n", + ZR_DEVNAME(zr)); dprintk(1, KERN_ERR - "%s: find_zr36057() - no card specified, please use the card=X insmod option\n", + "%s: It is not possible to auto-detect ZR36057 based cards\n", ZR_DEVNAME(zr)); goto zr_free_mem; } - } else { - int i; - unsigned short ss_vendor, ss_device; - ss_vendor = zr->pci_dev->subsystem_vendor; - ss_device = zr->pci_dev->subsystem_device; - dprintk(1, - KERN_INFO - "%s: Zoran ZR36067 (rev %d) irq: %d, memory: 0x%08x\n", - ZR_DEVNAME(zr), zr->revision, zr->pci_dev->irq, - zr->zr36057_adr); - dprintk(1, - KERN_INFO - "%s: subsystem vendor=0x%04x id=0x%04x\n", - ZR_DEVNAME(zr), ss_vendor, ss_device); - if (card_num == -1) { - dprintk(3, - KERN_DEBUG - "%s: find_zr36057() - trying to autodetect card type\n", + card_num = ent->driver_data; + if (card_num >= NUM_CARDS) { + dprintk(1, + KERN_ERR + "%s: Unknown card, try specifying card=X module parameter\n", ZR_DEVNAME(zr)); - for (i = 0; i < NUM_CARDS; i++) { - if (ss_vendor == zoran_cards[i].vendor_id && - ss_device == zoran_cards[i].device_id) { - dprintk(3, - KERN_DEBUG - "%s: find_zr36057() - card %s detected\n", - ZR_DEVNAME(zr), - zoran_cards[i].name); - card_num = i; - break; - } - } - if (i == NUM_CARDS) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - unknown card\n", - ZR_DEVNAME(zr)); - goto zr_free_mem; - } + goto zr_free_mem; + } + dprintk(3, + KERN_DEBUG + "%s: %s() - card %s detected\n", + ZR_DEVNAME(zr), __func__, zoran_cards[card_num].name); + } else { + card_num = card[nr]; + if (card_num >= NUM_CARDS || card_num < 0) { + dprintk(1, + KERN_ERR + "%s: User specified card type %d out of range (0 .. %d)\n", + ZR_DEVNAME(zr), card_num, NUM_CARDS - 1); + goto zr_free_mem; } - } - - if (card_num < 0 || card_num >= NUM_CARDS) { - dprintk(2, - KERN_ERR - "%s: find_zr36057() - invalid cardnum %d\n", - ZR_DEVNAME(zr), card_num); - goto zr_free_mem; } /* even though we make this a non pointer and thus -- cgit v1.2.1 From 5e098b668977c85838af09005bd96c2e987654f0 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Mon, 12 Jan 2009 13:09:46 -0300 Subject: V4L/DVB (10225): zoran: Remove zr36057_adr field The driver should only use the kernel mapped io address, zr36057_mem, and not the PCI bus address, zr36057_adr. Since the latter is only printed out once, there is no need to save it in the driver data structure. There was some old code that looked like it was for the Alpha architecture which would use the PCI bus address. It probably no longer applies to modern kernels. Signed-off-by: Trent Piepho Acked-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/zoran/zoran.h | 11 ++--------- drivers/media/video/zoran/zoran_card.c | 11 +++++------ 2 files changed, 7 insertions(+), 15 deletions(-) diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h index 7273abf5eb46..e873a916250f 100644 --- a/drivers/media/video/zoran/zoran.h +++ b/drivers/media/video/zoran/zoran.h @@ -400,7 +400,6 @@ struct zoran { char name[32]; /* name of this device */ struct pci_dev *pci_dev; /* PCI device */ unsigned char revision; /* revision of zr36057 */ - unsigned int zr36057_adr; /* bus address of IO mem returned by PCI BIOS */ unsigned char __iomem *zr36057_mem;/* pointer to mapped IO memory */ spinlock_t spinlock; /* Spinlock */ @@ -489,16 +488,10 @@ struct zoran { wait_queue_head_t test_q; }; -/*The following should be done in more portable way. It depends on define - of _ALPHA_BUZ in the Makefile.*/ - -#ifdef _ALPHA_BUZ -#define btwrite(dat,adr) writel((dat), zr->zr36057_adr+(adr)) -#define btread(adr) readl(zr->zr36057_adr+(adr)) -#else +/* There was something called _ALPHA_BUZ that used the PCI address instead of + * the kernel iomapped address for btread/btwrite. */ #define btwrite(dat,adr) writel((dat), zr->zr36057_mem+(adr)) #define btread(adr) readl(zr->zr36057_mem+(adr)) -#endif #define btand(dat,adr) btwrite((dat) & btread(adr), adr) #define btor(dat,adr) btwrite((dat) | btread(adr), adr) diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c index 7b73d83e1273..5d2f090aa0f8 100644 --- a/drivers/media/video/zoran/zoran_card.c +++ b/drivers/media/video/zoran/zoran_card.c @@ -1297,14 +1297,13 @@ static int __devinit zoran_probe(struct pci_dev *pdev, mutex_init(&zr->resource_lock); if (pci_enable_device(pdev)) goto zr_free_mem; - zr->zr36057_adr = pci_resource_start(zr->pci_dev, 0); pci_read_config_byte(zr->pci_dev, PCI_CLASS_REVISION, &zr->revision); dprintk(1, KERN_INFO - "%s: Zoran ZR360%c7 (rev %d), irq: %d, memory: 0x%08x\n", + "%s: Zoran ZR360%c7 (rev %d), irq: %d, memory: 0x%08llx\n", ZR_DEVNAME(zr), zr->revision < 2 ? '5' : '6', zr->revision, - zr->pci_dev->irq, zr->zr36057_adr); + zr->pci_dev->irq, (uint64_t)pci_resource_start(zr->pci_dev, 0)); if (zr->revision >= 2) { dprintk(1, KERN_INFO @@ -1359,12 +1358,12 @@ static int __devinit zoran_probe(struct pci_dev *pdev, snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "%s[%u]", zr->card.name, zr->id); - zr->zr36057_mem = ioremap_nocache(zr->zr36057_adr, 0x1000); + zr->zr36057_mem = pci_ioremap_bar(zr->pci_dev, 0); if (!zr->zr36057_mem) { dprintk(1, KERN_ERR - "%s: find_zr36057() - ioremap failed\n", - ZR_DEVNAME(zr)); + "%s: %s() - ioremap failed\n", + ZR_DEVNAME(zr), __func__); goto zr_free_mem; } -- cgit v1.2.1 From fc96ab730268b8b652ae2494088e8bd4572f58aa Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Mon, 12 Jan 2009 13:09:46 -0300 Subject: V4L/DVB (10226): zoran: Get rid of extra module ref count The zoran driver does a module_get/put of THIS_MODULE on device open/close. This isn't necessary as the kernel does this automatically. Clean up the failure path of zoran_open() somewhat. Make the dprintk()s on open/close a higher debug level and make the user count printed take the current open/close into account. Signed-off-by: Trent Piepho Acked-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/zoran/zoran_driver.c | 82 +++++++++++++------------------- 1 file changed, 33 insertions(+), 49 deletions(-) diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c index 21f37a68714b..120ef235e63d 100644 --- a/drivers/media/video/zoran/zoran_driver.c +++ b/drivers/media/video/zoran/zoran_driver.c @@ -1200,7 +1200,10 @@ static int zoran_open(struct file *file) { struct zoran *zr = video_drvdata(file); struct zoran_fh *fh; - int res, first_open = 0, have_module_locks = 0; + int res, first_open = 0; + + dprintk(2, KERN_INFO "%s: zoran_open(%s, pid=[%d]), users(-)=%d\n", + ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user + 1); lock_kernel(); @@ -1208,56 +1211,39 @@ static int zoran_open(struct file *file) * so locking ourselves only causes deadlocks */ /*mutex_lock(&zr->resource_lock);*/ + if (zr->user >= 2048) { + dprintk(1, KERN_ERR "%s: too many users (%d) on device\n", + ZR_DEVNAME(zr), zr->user); + res = -EBUSY; + goto fail_unlock; + } + if (!zr->decoder) { dprintk(1, KERN_ERR "%s: no TV decoder loaded for device!\n", ZR_DEVNAME(zr)); res = -EIO; - goto open_unlock_and_return; + goto fail_unlock; } - /* try to grab a module lock */ - if (!try_module_get(THIS_MODULE)) { - dprintk(1, - KERN_ERR - "%s: failed to acquire my own lock! PANIC!\n", - ZR_DEVNAME(zr)); - res = -ENODEV; - goto open_unlock_and_return; - } if (!try_module_get(zr->decoder->driver->driver.owner)) { dprintk(1, KERN_ERR - "%s: failed to grab ownership of i2c decoder\n", + "%s: failed to grab ownership of video decoder\n", ZR_DEVNAME(zr)); res = -EIO; - module_put(THIS_MODULE); - goto open_unlock_and_return; + goto fail_unlock; } if (zr->encoder && !try_module_get(zr->encoder->driver->driver.owner)) { dprintk(1, KERN_ERR - "%s: failed to grab ownership of i2c encoder\n", + "%s: failed to grab ownership of video encoder\n", ZR_DEVNAME(zr)); res = -EIO; - module_put(zr->decoder->driver->driver.owner); - module_put(THIS_MODULE); - goto open_unlock_and_return; - } - - have_module_locks = 1; - - if (zr->user >= 2048) { - dprintk(1, KERN_ERR "%s: too many users (%d) on device\n", - ZR_DEVNAME(zr), zr->user); - res = -EBUSY; - goto open_unlock_and_return; + goto fail_decoder; } - dprintk(1, KERN_INFO "%s: zoran_open(%s, pid=[%d]), users(-)=%d\n", - ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user); - /* now, create the open()-specific file_ops struct */ fh = kzalloc(sizeof(struct zoran_fh), GFP_KERNEL); if (!fh) { @@ -1266,7 +1252,7 @@ static int zoran_open(struct file *file) "%s: zoran_open() - allocation of zoran_fh failed\n", ZR_DEVNAME(zr)); res = -ENOMEM; - goto open_unlock_and_return; + goto fail_encoder; } /* used to be BUZ_MAX_WIDTH/HEIGHT, but that gives overflows * on norm-change! */ @@ -1277,9 +1263,8 @@ static int zoran_open(struct file *file) KERN_ERR "%s: zoran_open() - allocation of overlay_mask failed\n", ZR_DEVNAME(zr)); - kfree(fh); res = -ENOMEM; - goto open_unlock_and_return; + goto fail_fh; } if (zr->user++ == 0) @@ -1304,18 +1289,19 @@ static int zoran_open(struct file *file) return 0; -open_unlock_and_return: - /* if we grabbed locks, release them accordingly */ - if (have_module_locks) { - module_put(zr->decoder->driver->driver.owner); - if (zr->encoder) { - module_put(zr->encoder->driver->driver.owner); - } - module_put(THIS_MODULE); - } - +fail_fh: + kfree(fh); +fail_encoder: + if (zr->encoder) + module_put(zr->encoder->driver->driver.owner); +fail_decoder: + module_put(zr->decoder->driver->driver.owner); +fail_unlock: unlock_kernel(); + dprintk(2, KERN_INFO "%s: open failed (%d), users(-)=%d\n", + ZR_DEVNAME(zr), res, zr->user); + return res; } @@ -1325,8 +1311,8 @@ zoran_close(struct file *file) struct zoran_fh *fh = file->private_data; struct zoran *zr = fh->zr; - dprintk(1, KERN_INFO "%s: zoran_close(%s, pid=[%d]), users(+)=%d\n", - ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user); + dprintk(2, KERN_INFO "%s: zoran_close(%s, pid=[%d]), users(+)=%d\n", + ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user - 1); /* kernel locks (fs/device.c), so don't do that ourselves * (prevents deadlocks) */ @@ -1372,10 +1358,8 @@ zoran_close(struct file *file) /* release locks on the i2c modules */ module_put(zr->decoder->driver->driver.owner); - if (zr->encoder) { - module_put(zr->encoder->driver->driver.owner); - } - module_put(THIS_MODULE); + if (zr->encoder) + module_put(zr->encoder->driver->driver.owner); /*mutex_unlock(&zr->resource_lock);*/ -- cgit v1.2.1 From 8866f9cf8d85f3614855a49b9d9056f265d0cd33 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 12 Jan 2009 21:50:52 -0300 Subject: V4L/DVB (10228): em28xx: fix audio output PCM IN selection Some em28xx devices use the PCM IN AC 97 PIN for digital audio. However, currently, the PCM IN selection is not set by the driver. This patch allows specifying the PCM IN expected output, via board description table. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-core.c | 9 +++++++++ drivers/media/video/em28xx/em28xx.h | 19 +++++++++++++++++++ 2 files changed, 28 insertions(+) diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index eb5fb05fab22..69ce78867a49 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -454,6 +454,15 @@ int em28xx_audio_analog_set(struct em28xx *dev) em28xx_warn("couldn't setup AC97 register %d\n", outputs[i].reg); } + + if (dev->ctl_aoutput & EM28XX_AOUT_PCM_IN) { + int sel = ac97_return_record_select(dev->ctl_aoutput); + + /* Use the same input for both left and right channels */ + sel |= (sel << 8); + + em28xx_write_ac97(dev, AC97_RECORD_SELECT, sel); + } } return ret; diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 6c6b94aa05b2..23d1482df2d1 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -300,13 +300,32 @@ enum em28xx_amux { }; enum em28xx_aout { + /* AC97 outputs */ EM28XX_AOUT_MASTER = 1 << 0, EM28XX_AOUT_LINE = 1 << 1, EM28XX_AOUT_MONO = 1 << 2, EM28XX_AOUT_LFE = 1 << 3, EM28XX_AOUT_SURR = 1 << 4, + + /* PCM IN Mixer - used by AC97_RECORD_SELECT register */ + EM28XX_AOUT_PCM_IN = 1 << 7, + + /* Bits 10-8 are used to indicate the PCM IN record select */ + EM28XX_AOUT_PCM_MIC_PCM = 0 << 8, + EM28XX_AOUT_PCM_CD = 1 << 8, + EM28XX_AOUT_PCM_VIDEO = 2 << 8, + EM28XX_AOUT_PCM_AUX = 3 << 8, + EM28XX_AOUT_PCM_LINE = 4 << 8, + EM28XX_AOUT_PCM_STEREO = 5 << 8, + EM28XX_AOUT_PCM_MONO = 6 << 8, + EM28XX_AOUT_PCM_PHONE = 7 << 8, }; +static int ac97_return_record_select(int a_out) +{ + return (a_out & 0x700) >> 8; +} + struct em28xx_reg_seq { int reg; unsigned char val, mask; -- cgit v1.2.1 From 6e0e12f15a503b7096303d495247fbeaa2b12582 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sun, 11 Jan 2009 21:18:04 -0300 Subject: V4L/DVB (10229): cx88-dvb: Fix order of frontend allocations On Fri, 2009-01-09 at 15:40 +0300, Goga777 wrote: > hI > > With today v4l-dvb I couldn't run my hvr4000 card on 2.6.27 kernel > [ 14.555162] cx88/2: cx2388x dvb driver version 0.0.6 loaded > [ 14.555231] cx88/2: registering cx8802 driver, type: dvb access: shared > [ 14.555303] cx88[0]/2: subsystem: 0070:6900, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=68] > [ 14.555374] cx88[0]/2: cx2388x based DVB/ATSC card > [ 14.555446] BUG: unable to handle kernel NULL pointer dereference at 00000000 > [ 14.555560] IP: [] __mutex_lock_common+0x3c/0xe4 > [ 14.555652] *pde = 00000000 > [ 14.555735] Oops: 0002 [#1] SMP > [ 14.555851] Modules linked in: cx88_dvb(+) cx88_vp3054_i2c videobuf_dvb wm8775 dvb_core tuner_simple tuner_types snd_seq_dummy tda9887 snd_seq_oss(+) snd_intel8x0(+) tda8290 snd_seq_midi snd_seq_midi_event snd_ac97_codec cx88_alsa(+) snd_seq ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_rawmidi snd_timer tuner snd_seq_device psmouse snd serio_raw ivtv(+) cx8800 cx8802 cx88xx soundcore cx2341x ir_common ns558 i2c_i801 v4l2_common videodev i2c_algo_bit gameport v4l1_compat snd_page_alloc tveeprom pcspkr floppy videobuf_dma_sg videobuf_core btcx_risc i2c_core parport_pc parport button intel_agp agpgart shpchp pci_hotplug rng_core iTCO_wdt sd_mod evdev usbhid hid ff_memless ext3 jbd mbcache ide_cd_mod cdrom ide_disk ata_piix libata dock 8139too usb_storage scsi_mod piix 8139cp mii ide_core uhci_hcd ehci_hcd usbcore thermal processor fan thermal_sys > [ 14.557013] > [ 14.557013] Pid: 2310, comm: modprobe Not tainted (2.6.27.1-custom-default1 #1) > [ 14.557013] EIP: 0060:[] EFLAGS: 00010246 CPU: 1 > [ 14.557013] EIP is at __mutex_lock_common+0x3c/0xe4 > [ 14.557013] EAX: de653e98 EBX: de739118 ECX: de739120 EDX: 00000000 > [ 14.557013] ESI: dd4209e0 EDI: de73911c EBP: de653eb0 ESP: de653e88 > [ 14.557013] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 > [ 14.557013] Process modprobe (pid: 2310, ti=de652000 task=dd4209e0 task.ti=de652000) > [ 14.557013] Stack: 3535352e 5d343733 00000002 de739120 de739120 00000000 c044a6c0 de739110 > [ 14.557013] de739118 00000001 de653ebc c02e6d38 c02e6b88 de653ec4 c02e6b88 de653ed8 > [ 14.557013] e1ac7115 de6a9000 00000001 00000000 de653f0c e1aeca62 de739004 de739000 > [ 14.557013] Call Trace: > [ 14.557013] [] ? __mutex_lock_slowpath+0x17/0x1a > [ 14.557013] [] ? mutex_lock+0x12/0x14 > [ 14.557013] [] ? mutex_lock+0x12/0x14 > [ 14.557013] [] ? videobuf_dvb_get_frontend+0x19/0x40 [videobuf_dvb] > [ 14.557013] [] ? cx8802_dvb_probe+0xc9/0x1945 [cx88_dvb] > [ 14.557013] [] ? cx8802_register_driver+0xbd/0x1ac [cx8802] > [ 14.557013] [] ? cx8802_register_driver+0x106/0x1ac [cx8802] > [ 14.557013] [] ? dvb_init+0x22/0x27 [cx88_dvb] > [ 14.557013] [] ? _stext+0x42/0x11a > [ 14.557013] [] ? dvb_init+0x0/0x27 [cx88_dvb] > [ 14.557013] [] ? __blocking_notifier_call_chain+0xe/0x51 > [ 14.557013] [] ? sys_init_module+0x8c/0x17d > [ 14.557013] [] ? syscall_call+0x7/0xb > [ 14.557013] [] ? round_jiffies_relative+0x14/0x16 > [ 14.557013] ======================= > [ 14.557013] Code: 78 04 89 f8 89 55 e0 64 8b 35 00 30 3f c0 e8 2e 0c 00 00 8d 43 08 89 45 e4 8b 53 0c 8d 45 e8 8b 4d e4 89 43 0c 89 4d e8 89 55 ec <89> 02 89 75 f0 83 c8 ff 87 03 48 74 55 8a 45 e0 8b 4d e0 83 e0 > [ 14.557013] EIP: [] __mutex_lock_common+0x3c/0xe4 SS:ESP 0068:de653e88 > [ 14.565211] ---[ end trace 94d8b014e067ac7b ]--- Tested and confirmed to work by several users at linux-media@vger.kernel.org Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88-dvb.c | 72 +++++++++++++++++++------------------ 1 file changed, 38 insertions(+), 34 deletions(-) diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index 613dfea4ff3e..aef5297534af 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -614,34 +614,41 @@ static struct stv0288_config tevii_tuner_earda_config = { .set_ts_params = cx24116_set_ts_param, }; -static int dvb_register(struct cx8802_dev *dev) +static int cx8802_alloc_frontends(struct cx8802_dev *dev) { struct cx88_core *core = dev->core; - struct videobuf_dvb_frontend *fe0, *fe1 = NULL; - int mfe_shared = 0; /* bus not shared by default */ + struct videobuf_dvb_frontend *fe = NULL; int i; - if (0 != core->i2c_rc) { - printk(KERN_ERR "%s/2: no i2c-bus available, cannot attach dvb drivers\n", core->name); - goto frontend_detach; - } - - if (!core->board.num_frontends) - return -EINVAL; - mutex_init(&dev->frontends.lock); INIT_LIST_HEAD(&dev->frontends.felist); + if (!core->board.num_frontends) + return -ENODEV; + printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__, core->board.num_frontends); for (i = 1; i <= core->board.num_frontends; i++) { - fe0 = videobuf_dvb_alloc_frontend(&dev->frontends, i); - if (!fe0) { + fe = videobuf_dvb_alloc_frontend(&dev->frontends, i); + if (!fe) { printk(KERN_ERR "%s() failed to alloc\n", __func__); videobuf_dvb_dealloc_frontends(&dev->frontends); - goto frontend_detach; + return -ENOMEM; } } + return 0; +} + +static int dvb_register(struct cx8802_dev *dev) +{ + struct cx88_core *core = dev->core; + struct videobuf_dvb_frontend *fe0, *fe1 = NULL; + int mfe_shared = 0; /* bus not shared by default */ + + if (0 != core->i2c_rc) { + printk(KERN_ERR "%s/2: no i2c-bus available, cannot attach dvb drivers\n", core->name); + goto frontend_detach; + } /* Get the first frontend */ fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); @@ -1243,6 +1250,8 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv) struct cx88_core *core = drv->core; struct cx8802_dev *dev = drv->core->dvbdev; int err; + struct videobuf_dvb_frontend *fe; + int i; dprintk( 1, "%s\n", __func__); dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n", @@ -1258,39 +1267,34 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv) /* If vp3054 isn't enabled, a stub will just return 0 */ err = vp3054_i2c_probe(dev); if (0 != err) - goto fail_probe; + goto fail_core; /* dvb stuff */ printk(KERN_INFO "%s/2: cx2388x based DVB/ATSC card\n", core->name); dev->ts_gen_cntrl = 0x0c; + err = cx8802_alloc_frontends(dev); + if (err) + goto fail_core; + err = -ENODEV; - if (core->board.num_frontends) { - struct videobuf_dvb_frontend *fe; - int i; - - for (i = 1; i <= core->board.num_frontends; i++) { - fe = videobuf_dvb_get_frontend(&core->dvbdev->frontends, i); - if (fe == NULL) { - printk(KERN_ERR "%s() failed to get frontend(%d)\n", + for (i = 1; i <= core->board.num_frontends; i++) { + fe = videobuf_dvb_get_frontend(&core->dvbdev->frontends, i); + if (fe == NULL) { + printk(KERN_ERR "%s() failed to get frontend(%d)\n", __func__, i); - goto fail_probe; - } - videobuf_queue_sg_init(&fe->dvb.dvbq, &dvb_qops, + goto fail_probe; + } + videobuf_queue_sg_init(&fe->dvb.dvbq, &dvb_qops, &dev->pci->dev, &dev->slock, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_TOP, sizeof(struct cx88_buffer), dev); - /* init struct videobuf_dvb */ - fe->dvb.name = dev->core->name; - } - } else { - /* no frontends allocated */ - printk(KERN_ERR "%s/2 .num_frontends should be non-zero\n", - core->name); - goto fail_core; + /* init struct videobuf_dvb */ + fe->dvb.name = dev->core->name; } + err = dvb_register(dev); if (err) /* frontends/adapter de-allocated in dvb_register */ -- cgit v1.2.1 From f9129a2e537a4849c5194f98577bc274cda0d726 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 12 Jan 2009 18:12:13 -0300 Subject: V4L/DVB (10230): v4l2-device: fix buggy macro Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/media/v4l2-device.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/include/media/v4l2-device.h b/include/media/v4l2-device.h index 9bf4ccc93dbf..55e41afd95ef 100644 --- a/include/media/v4l2-device.h +++ b/include/media/v4l2-device.h @@ -94,16 +94,16 @@ void v4l2_device_unregister_subdev(struct v4l2_subdev *sd); /* Call the specified callback for all subdevs matching grp_id (if 0, then match them all). Ignore any errors. Note that you cannot add or delete a subdev while walking the subdevs list. */ -#define v4l2_device_call_all(dev, grp_id, o, f, args...) \ +#define v4l2_device_call_all(dev, grpid, o, f, args...) \ __v4l2_device_call_subdevs(dev, \ - !(grp_id) || sd->grp_id == (grp_id), o, f , ##args) + !(grpid) || sd->grp_id == (grpid), o, f , ##args) /* Call the specified callback for all subdevs matching grp_id (if 0, then match them all). If the callback returns an error other than 0 or -ENOIOCTLCMD, then return with that error code. Note that you cannot add or delete a subdev while walking the subdevs list. */ -#define v4l2_device_call_until_err(dev, grp_id, o, f, args...) \ +#define v4l2_device_call_until_err(dev, grpid, o, f, args...) \ __v4l2_device_call_subdevs_until_err(dev, \ - !(grp_id) || sd->grp_id == (grp_id), o, f , ##args) + !(grpid) || sd->grp_id == (grpid), o, f , ##args) #endif -- cgit v1.2.1 From db4b2d193c2d3ad495bcfbce8d4354c1663af2e5 Mon Sep 17 00:00:00 2001 From: Nicolas Fournier Date: Tue, 13 Jan 2009 07:15:25 -0300 Subject: V4L/DVB (10233): [PATCH] Terratec Cinergy DT XS Diversity new USB ID (0ccd:0081) The following patch adds support for a new version of the Terratec Cinergy DT USB XS Diversity Dual DVB-T TV tuner stick. The USB ID of the new stick is 0ccd:0081. The hardware of the stick has changed, when compared to the first version of this stick, but it still uses quite standard components, so that only minor changes are needed to the sources. The patch has been successfully tested with hotplugging the device and then 2 x tzap and 2 x mplayer, to watch two different TV programs simultaneously. The stick works with both, the old and new firmwares: - dvb-usb-dib0700-1.10.fw and - dvb-usb-dib0700-1.20.fw Signed-off-by: Nicolas Fournier Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dib0700_devices.c | 8 +++++++- drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 1 + 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 5e837668fb00..635d30a55078 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -1394,6 +1394,8 @@ struct usb_device_id dib0700_usb_id_table[] = { /* 40 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E) }, { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E_SE) }, { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_EXPRESS) }, + { USB_DEVICE(USB_VID_TERRATEC, + USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2) }, { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); @@ -1659,7 +1661,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { } }, - .num_device_descs = 4, + .num_device_descs = 5, .devices = { { "DiBcom STK7070PD reference design", { &dib0700_usb_id_table[17], NULL }, @@ -1676,6 +1678,10 @@ struct dvb_usb_device_properties dib0700_devices[] = { { "Hauppauge Nova-TD-500 (84xxx)", { &dib0700_usb_id_table[36], NULL }, { NULL }, + }, + { "Terratec Cinergy DT USB XS Diversity", + { &dib0700_usb_id_table[43], NULL }, + { NULL }, } } }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 2c6f4be05c07..0db0c06ee6f2 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -162,6 +162,7 @@ #define USB_PID_AVERMEDIA_A309 0xa309 #define USB_PID_TECHNOTREND_CONNECT_S2400 0x3006 #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY 0x005a +#define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2 0x0081 #define USB_PID_TERRATEC_CINERGY_HT_USB_XE 0x0058 #define USB_PID_TERRATEC_CINERGY_HT_EXPRESS 0x0060 #define USB_PID_TERRATEC_CINERGY_T_EXPRESS 0x0062 -- cgit v1.2.1 From aeaecaf8eba9efa6a0a623122abb8f61449e42ef Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Wed, 14 Jan 2009 04:58:36 -0300 Subject: V4L/DVB (10240): Fix obvious swapped names in v4l2_subdev logic The VIDIOC_QUERYCTRL command needs to actually do a queryctrl, not a querymenu. Similarly, the VIDIOC_QUERYMENU command needs to actually do a querymenu not a queryctrl. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-subdev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/v4l2-subdev.c b/drivers/media/video/v4l2-subdev.c index fbe9cc0d433a..21208805ea9b 100644 --- a/drivers/media/video/v4l2-subdev.c +++ b/drivers/media/video/v4l2-subdev.c @@ -28,13 +28,13 @@ int v4l2_subdev_command(struct v4l2_subdev *sd, unsigned cmd, void *arg) { switch (cmd) { case VIDIOC_QUERYCTRL: - return v4l2_subdev_call(sd, core, querymenu, arg); + return v4l2_subdev_call(sd, core, queryctrl, arg); case VIDIOC_G_CTRL: return v4l2_subdev_call(sd, core, g_ctrl, arg); case VIDIOC_S_CTRL: return v4l2_subdev_call(sd, core, s_ctrl, arg); case VIDIOC_QUERYMENU: - return v4l2_subdev_call(sd, core, queryctrl, arg); + return v4l2_subdev_call(sd, core, querymenu, arg); case VIDIOC_LOG_STATUS: return v4l2_subdev_call(sd, core, log_status); case VIDIOC_DBG_G_CHIP_IDENT: -- cgit v1.2.1 From 32929fb4c7c4a693ed723253b21e7bf3c8cb4b1c Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 17 Jan 2009 11:21:02 -0300 Subject: V4L/DVB (10243): em28xx: fix compile warning Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 23d1482df2d1..e15ca2f0fb11 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -321,7 +321,7 @@ enum em28xx_aout { EM28XX_AOUT_PCM_PHONE = 7 << 8, }; -static int ac97_return_record_select(int a_out) +static inline int ac97_return_record_select(int a_out) { return (a_out & 0x700) >> 8; } -- cgit v1.2.1 From cf8e193a48879a02f55b53c0cf2ec98a784baaa5 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 17 Jan 2009 13:09:11 -0300 Subject: V4L/DVB (10248): v4l-dvb: fix a bunch of compile warnings. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/mxl5007t.c | 2 +- drivers/media/dvb/dvb-usb/af9005-fe.c | 2 +- drivers/media/dvb/frontends/drx397xD.c | 2 +- drivers/media/dvb/ttusb-dec/ttusb_dec.c | 2 +- drivers/media/video/tda9875.c | 2 +- drivers/media/video/usbvision/usbvision-i2c.c | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/media/common/tuners/mxl5007t.c b/drivers/media/common/tuners/mxl5007t.c index 64379f2bf237..3ec28945c26f 100644 --- a/drivers/media/common/tuners/mxl5007t.c +++ b/drivers/media/common/tuners/mxl5007t.c @@ -657,7 +657,7 @@ static int mxl5007t_get_status(struct dvb_frontend *fe, u32 *status) { struct mxl5007t_state *state = fe->tuner_priv; int rf_locked, ref_locked; - s32 rf_input_level; + s32 rf_input_level = 0; int ret; if (fe->ops.i2c_gate_ctrl) diff --git a/drivers/media/dvb/dvb-usb/af9005-fe.c b/drivers/media/dvb/dvb-usb/af9005-fe.c index b1a9c4cdec93..199ece0d4883 100644 --- a/drivers/media/dvb/dvb-usb/af9005-fe.c +++ b/drivers/media/dvb/dvb-usb/af9005-fe.c @@ -220,7 +220,7 @@ static int af9005_get_post_vit_ber(struct dvb_frontend *fe, u16 * abort_count) { u32 loc_cw_count = 0, loc_err_count; - u16 loc_abort_count; + u16 loc_abort_count = 0; int ret; ret = diff --git a/drivers/media/dvb/frontends/drx397xD.c b/drivers/media/dvb/frontends/drx397xD.c index ec4e08dbc699..1e81e713df63 100644 --- a/drivers/media/dvb/frontends/drx397xD.c +++ b/drivers/media/dvb/frontends/drx397xD.c @@ -646,7 +646,7 @@ static int drx_tune(struct drx397xD_state *s, u32 edi = 0, ebx = 0, ebp = 0, edx = 0; u16 v20 = 0, v1E = 0, v16 = 0, v14 = 0, v12 = 0, v10 = 0, v0E = 0; - int rc, df_tuner; + int rc, df_tuner = 0; int a, b, c, d; pr_debug("%s %d\n", __func__, s->config.d60); diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c index 0aa96df80fc2..d91e0638448f 100644 --- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c +++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c @@ -1384,7 +1384,7 @@ static int ttusb_dec_boot_dsp(struct ttusb_dec *dec) static int ttusb_dec_init_stb(struct ttusb_dec *dec) { int result; - unsigned int mode, model, version; + unsigned int mode = 0, model = 0, version = 0; dprintk("%s\n", __func__); diff --git a/drivers/media/video/tda9875.c b/drivers/media/video/tda9875.c index 56f0c0eb500f..00c6cbe06ab0 100644 --- a/drivers/media/video/tda9875.c +++ b/drivers/media/video/tda9875.c @@ -242,7 +242,7 @@ static int tda9875_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) static int tda9875_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) { struct tda9875 *t = to_state(sd); - int chvol=0, volume, balance, left, right; + int chvol = 0, volume = 0, balance = 0, left, right; switch (ctrl->id) { case V4L2_CID_AUDIO_VOLUME: diff --git a/drivers/media/video/usbvision/usbvision-i2c.c b/drivers/media/video/usbvision/usbvision-i2c.c index 9907b9aff2b9..6b66ae4f430f 100644 --- a/drivers/media/video/usbvision/usbvision-i2c.c +++ b/drivers/media/video/usbvision/usbvision-i2c.c @@ -157,7 +157,7 @@ usbvision_i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num) struct i2c_msg *pmsg; struct usb_usbvision *usbvision; int i, ret; - unsigned char addr; + unsigned char addr = 0; usbvision = (struct usb_usbvision *)i2c_get_adapdata(i2c_adap); -- cgit v1.2.1 From ba390f005573bdf6ab7fd78bb05119036c2ed539 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 15 Jan 2009 05:37:14 -0300 Subject: V4L/DVB (10250): cx25840: fix regression: fw not loaded on first use With the conversion to v4l2_subdev one bit of code was accidentally dropped: on receiving the first command the driver has to load the fw. A new init() command was introduced to do that explicitly for bridge drivers that are converted to use v4l2_subdev, but old drivers that are not yet converted no longer worked. This patch fixes this regression for these old drivers. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx25840/cx25840-core.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index 88f2fd32bfe3..b3b5b17dc8e7 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -1382,6 +1382,14 @@ static int cx25840_log_status(struct v4l2_subdev *sd) static int cx25840_command(struct i2c_client *client, unsigned cmd, void *arg) { + /* ignore this command */ + if (cmd == TUNER_SET_TYPE_ADDR) + return 0; + + /* Old-style drivers rely on initialization on first use, so + call the init whenever a command is issued to this driver. + New-style drivers using v4l2_subdev should call init explicitly. */ + cx25840_init(i2c_get_clientdata(client), 0); return v4l2_subdev_command(i2c_get_clientdata(client), cmd, arg); } -- cgit v1.2.1 From 53d12e5a56934c31ca59f3b6f127e5a68e645fd2 Mon Sep 17 00:00:00 2001 From: Robert Krakora Date: Fri, 16 Jan 2009 11:23:25 -0300 Subject: V4L/DVB (10254): em28xx: Fix audio URB transfer buffer race condition MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit em28xx: Fix audio URB transfer buffer memory leak and race condition/corruption of capture pointer Leak fix kindly contributed by Pádraig Brady. Signed-off-by: Robert Krakora Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-audio.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index 94378ccb7505..4df6d3288424 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -65,6 +65,9 @@ static int em28xx_isoc_audio_deinit(struct em28xx *dev) usb_unlink_urb(dev->adev.urb[i]); usb_free_urb(dev->adev.urb[i]); dev->adev.urb[i] = NULL; + + kfree(dev->adev.transfer_buffer[i]); + dev->adev.transfer_buffer[i] = NULL; } return 0; @@ -389,11 +392,15 @@ static int snd_em28xx_capture_trigger(struct snd_pcm_substream *substream, static snd_pcm_uframes_t snd_em28xx_capture_pointer(struct snd_pcm_substream *substream) { - struct em28xx *dev; + unsigned long flags; + struct em28xx *dev; snd_pcm_uframes_t hwptr_done; + dev = snd_pcm_substream_chip(substream); + spin_lock_irqsave(&dev->adev.slock, flags); hwptr_done = dev->adev.hwptr_done_capture; + spin_unlock_irqrestore(&dev->adev.slock, flags); return hwptr_done; } -- cgit v1.2.1 From 7e4b15e4201a101840c226dafe0d3df7ee652bf6 Mon Sep 17 00:00:00 2001 From: Robert Krakora Date: Sun, 18 Jan 2009 21:45:28 -0300 Subject: V4L/DVB (10256): em28xx: Fix for KWorld 330U AC97 Fix for KWorld 330U AC97 Many thanks to Devin and Mauro again!!! Signed-off-by: Robert Krakora Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-core.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index 69ce78867a49..71ad35192c06 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -438,6 +438,10 @@ int em28xx_audio_analog_set(struct em28xx *dev) if (dev->audio_mode.ac97 != EM28XX_NO_AC97) { int vol; + em28xx_write_ac97(dev, AC97_POWER_DOWN_CTRL, 0x4200); + em28xx_write_ac97(dev, AC97_EXT_AUD_CTRL, 0x0031); + em28xx_write_ac97(dev, AC97_PCM_IN_SRATE, 0xbb80); + /* LSB: left channel - both channels with the same level */ vol = (0x1f - dev->volume) | ((0x1f - dev->volume) << 8); -- cgit v1.2.1 From 6e7b9ea0937eeb75fa166ef7bd22b5f3bb5676d1 Mon Sep 17 00:00:00 2001 From: Robert Krakora Date: Sun, 18 Jan 2009 21:59:34 -0300 Subject: V4L/DVB (10257): em28xx: Fix for KWorld 330U Board Fix for KWorld 330U Board Many thanks to Devin and Mauro!!! Signed-off-by: Robert Krakora Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 32 +++++++++++++++++++++++++------ drivers/media/video/em28xx/em28xx-dvb.c | 20 ++++++++++++++++++- drivers/media/video/em28xx/em28xx-video.c | 4 +++- drivers/media/video/em28xx/em28xx.h | 2 +- 4 files changed, 49 insertions(+), 9 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index ef9bf008a924..3b3ca3f46d52 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -102,6 +102,18 @@ static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = { /* Board - EM2870 Kworld 355u Analog - No input analog */ +static struct em28xx_reg_seq kworld_330u_analog[] = { + {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10}, + {EM2880_R04_GPO, 0x00, 0xff, 10}, + { -1, -1, -1, -1}, +}; + +static struct em28xx_reg_seq kworld_330u_digital[] = { + {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10}, + {EM2880_R04_GPO, 0x08, 0xff, 10}, + { -1, -1, -1, -1}, +}; + /* Callback for the most boards */ static struct em28xx_reg_seq default_tuner_gpio[] = { {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10}, @@ -1177,29 +1189,33 @@ struct em28xx_board em28xx_boards[] = { .gpio = hauppauge_wintv_hvr_900_analog, } }, }, - [EM2883_BOARD_KWORLD_HYBRID_A316] = { + [EM2883_BOARD_KWORLD_HYBRID_330U] = { .name = "Kworld PlusTV HD Hybrid 330", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .mts_firmware = 1, .has_dvb = 1, - .dvb_gpio = default_digital, + .dvb_gpio = kworld_330u_digital, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_EEPROM_ON_BOARD | EM28XX_I2C_EEPROM_KEY_VALID, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, - .gpio = default_analog, + .gpio = kworld_330u_analog, + .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, - .gpio = hauppauge_wintv_hvr_900_analog, + .gpio = kworld_330u_analog, + .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, - .gpio = hauppauge_wintv_hvr_900_analog, + .gpio = kworld_330u_analog, } }, }, [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = { @@ -1249,7 +1265,7 @@ struct usb_device_id em28xx_id_table [] = { { USB_DEVICE(0xeb1a, 0xe310), .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD }, { USB_DEVICE(0xeb1a, 0xa316), - .driver_info = EM2883_BOARD_KWORLD_HYBRID_A316 }, + .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U }, { USB_DEVICE(0xeb1a, 0xe320), .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II }, { USB_DEVICE(0xeb1a, 0xe323), @@ -1526,6 +1542,10 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) /* FIXME: Better to specify the needed IF */ ctl->demod = XC3028_FE_DEFAULT; break; + case EM2883_BOARD_KWORLD_HYBRID_330U: + ctl->demod = XC3028_FE_CHINA; + ctl->fname = XC2028_DEFAULT_FIRMWARE; + break; default: ctl->demod = XC3028_FE_OREN538; } diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index d38cb21834d9..9ad8527b3fda 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -28,6 +28,7 @@ #include "lgdt330x.h" #include "zl10353.h" +#include "s5h1409.h" #ifdef EM28XX_DRX397XD_SUPPORT #include "drx397xD.h" #endif @@ -232,6 +233,15 @@ static struct zl10353_config em28xx_zl10353_with_xc3028 = { .if2 = 45600, }; +static struct s5h1409_config em28xx_s5h1409_with_xc3028 = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_PARALLEL_OUTPUT, + .gpio = S5H1409_GPIO_OFF, + .inversion = S5H1409_INVERSION_OFF, + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK +}; + #ifdef EM28XX_DRX397XD_SUPPORT /* [TODO] djh - not sure yet what the device config needs to contain */ static struct drx397xD_config em28xx_drx397xD_with_xc3028 = { @@ -412,7 +422,6 @@ static int dvb_init(struct em28xx *dev) case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: - case EM2883_BOARD_KWORLD_HYBRID_A316: case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600: dvb->frontend = dvb_attach(lgdt330x_attach, &em2880_lgdt3303_dev, @@ -433,6 +442,15 @@ static int dvb_init(struct em28xx *dev) goto out_free; } break; + case EM2883_BOARD_KWORLD_HYBRID_330U: + dvb->frontend = dvb_attach(s5h1409_attach, + &em28xx_s5h1409_with_xc3028, + &dev->i2c_adap); + if (attach_xc3028(0x61, dev) < 0) { + result = -EINVAL; + goto out_free; + } + break; case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: #ifdef EM28XX_DRX397XD_SUPPORT /* We don't have the config structure properly populated, so diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index d40650655f74..8e61b2ca9167 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -1956,6 +1956,7 @@ static struct video_device *em28xx_vdev_init(struct em28xx *dev, int em28xx_register_analog_devices(struct em28xx *dev) { + u8 val; int ret; printk(KERN_INFO "%s: v4l2 driver version %d.%d.%d\n", @@ -1983,7 +1984,8 @@ int em28xx_register_analog_devices(struct em28xx *dev) /* enable vbi capturing */ /* em28xx_write_reg(dev, EM28XX_R0E_AUDIOSRC, 0xc0); audio register */ -/* em28xx_write_reg(dev, EM28XX_R0F_XCLK, 0x80); clk register */ + val = (u8)em28xx_read_reg(dev, EM28XX_R0F_XCLK); + em28xx_write_reg(dev, EM28XX_R0F_XCLK, (EM28XX_XCLK_AUDIO_UNMUTE | val)); em28xx_write_reg(dev, EM28XX_R11_VINCTRL, 0x51); em28xx_set_outfmt(dev); diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index e15ca2f0fb11..dd2cd36fb1bb 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -94,7 +94,7 @@ #define EM2882_BOARD_KWORLD_VS_DVBT 54 #define EM2882_BOARD_TERRATEC_HYBRID_XS 55 #define EM2882_BOARD_PINNACLE_HYBRID_PRO 56 -#define EM2883_BOARD_KWORLD_HYBRID_A316 57 +#define EM2883_BOARD_KWORLD_HYBRID_330U 57 #define EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU 58 #define EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 60 #define EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2 61 -- cgit v1.2.1 From 8760e5b6d1dc9527e0f96f80daaa12a8158d9839 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Sat, 17 Jan 2009 13:41:54 -0300 Subject: V4L/DVB (10261): em28xx: fix kernel panic on audio shutdown Revert a change made in change 9743 which resulted in a kernel panic in some cases on shutdown of the audio stream. First discovered when working on the Pinnacle 880e support, and later reproduced by a user on the mailing list with the HVR-900 as well. Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-audio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index 4df6d3288424..fcc300c93995 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -62,7 +62,7 @@ static int em28xx_isoc_audio_deinit(struct em28xx *dev) dprintk("Stopping isoc\n"); for (i = 0; i < EM28XX_AUDIO_BUFS; i++) { - usb_unlink_urb(dev->adev.urb[i]); + usb_kill_urb(dev->adev.urb[i]); usb_free_urb(dev->adev.urb[i]); dev->adev.urb[i] = NULL; -- cgit v1.2.1 From bf3647c44bc76c43c4b2ebb4c37a559e899ac70e Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 29 Jan 2009 11:45:35 +0100 Subject: x86: tone down mtrr_trim_uncached_memory() warning kerneloops.org is reporting a lot of these warnings that come due to vmware not setting up any MTRRs for emulated CPUs: | Reported 709 times (14696 total reports) | BIOS bug (often in VMWare) where the MTRR's are set up incorrectly | or not at all | | This warning was last seen in version 2.6.29-rc2-git1, and first | seen in 2.6.24. | | More info: | http://www.kerneloops.org/searchweek.php?search=mtrr_trim_uncached_memory Keep a one-liner KERN_INFO about it - so that we have so notice if empty MTRRs are caused by native hardware/BIOS weirdness. Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mtrr/main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index d259e5d2e054..236a401b8259 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -1594,8 +1594,7 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) /* kvm/qemu doesn't have mtrr set right, don't trim them all */ if (!highest_pfn) { - WARN(!kvm_para_available(), KERN_WARNING - "WARNING: strange, CPU MTRRs all blank?\n"); + printk(KERN_INFO "CPU MTRRs all blank - virtualized system.\n"); return 0; } -- cgit v1.2.1 From 6dbe7af37def293e1116af186c94e2d47d353190 Mon Sep 17 00:00:00 2001 From: Tony Broad Date: Sun, 18 Jan 2009 07:55:38 -0300 Subject: V4L/DVB (10265): budget.c driver: Kernel oops: "BUG: unable to handle kernel paging request at ffffffff I'm using a "Hauppauge WinTV-NOVA-T DVB card" of PCI id "13c2:1005" with kernel 2.6.27.9. I've recently experienced the following fairly consistent kernel oops on startup in grundig_29504_401_tuner_set_params from budget.c. As you might expect, following this failure, the card doesn't work. I'm not a kernel developer, nevertheless I seem to have managed to track this down to a non-existent initialisation of budget->dvb_frontend->tuner_priv. The attached patch fixes the problem for me (and I've managed to tune the card successfully as a result), but I don't know of anyone else using the driver so I can't test it on other people. Please let me know if this works for you or if I've done something terribly wrong ;-( BUG: unable to handle kernel paging request at ffffffff IP: [] :budget:grundig_29504_401_tuner_set_params+0x3b/0xf8 *pde = 007e0067 *pte = 00000000 Oops: 0000 [#1] SMP Modules linked in: bridge stp bnep rfcomm l2cap asb100 hwmon_vid hwmon fuse ipt_REJECT nf_conntrack_ipv4 iptable_filter ip_tables ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ipv6 loop dm_multipath scsi_dh ppdev snd_cmipci gameport snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss l64781 snd_pcm snd_page_alloc snd_opl3_lib snd_timer parport_pc snd_hwdep parport btusb snd_mpu401_uart budget budget_core snd_rawmidi bluetooth saa7146 snd_seq_device ttpci_eeprom snd soundcore sr_mod i2c_sis96x cdrom dvb_core sis900 i2c_core floppy pcspkr mii sata_sil sg dm_snapshot dm_zero dm_mirror dm_log dm_mod pata_sis ata_generic pata_acpi libata sd_mod scsi_mod crc_t10dif ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode] Pid: 2319, comm: kdvb-fe-0 Not tainted (2.6.27.9-73.fc9.i686 #1) EIP: 0060:[] EFLAGS: 00010286 CPU: 0 EIP is at grundig_29504_401_tuner_set_params+0x3b/0xf8 [budget] EAX: f6417f00 EBX: f6f53808 ECX: 00000000 EDX: ffffffff ESI: f6f94404 EDI: f6417f00 EBP: f6417f10 ESP: f6417ef0 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process kdvb-fe-0 (pid: 2319, ti=f6417000 task=f642b2c0 task.ti=f6417000) Stack: f6e39800 00000000 00000004 f6417f00 c064523c f6f53808 f6f53800 f6f94404 f6417f54 f8b2e45a f6417f24 00000286 f6417f4c f6417f38 00000000 00000286 f6417f3c c064520f f642b2c0 f6417f6c c064456f 00000001 f6f94400 00000001 Call Trace: [] ? _spin_lock_irqsave+0x29/0x30 [] ? apply_frontend_param+0x27/0x357 [l64781] [] ? _spin_lock_irq+0x1c/0x20 [] ? __down_common+0x91/0xbf [] ? dvb_frontend_swzigzag_autotune+0x17d/0x1a4 [dvb_core] [] ? dvb_frontend_swzigzag+0x1ac/0x209 [dvb_core] [] ? dvb_frontend_thread+0x2eb/0x3b3 [dvb_core] [] ? autoremove_wake_function+0x0/0x33 [] ? dvb_frontend_thread+0x0/0x3b3 [dvb_core] [] ? kthread+0x3b/0x61 [] ? kthread+0x0/0x61 [] ? kernel_thread_helper+0x7/0x10 ======================= Code: ec 14 8b 80 00 02 00 00 8b 93 08 02 00 00 8d 7d e4 8b 40 20 89 45 e0 31 c0 85 d2 f3 ab 8d 45 f0 66 c7 45 e8 04 00 89 45 ec 74 09 <0f> b6 02 66 89 45 e4 eb 06 66 c7 45 e4 61 00 8b 0e be 0a 8b 02 EIP: [] grundig_29504_401_tuner_set_params+0x3b/0xf8 [budget] SS:ESP 0068:f6417ef0 Signed-off-by: Oliver Endriss Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/ttpci/budget.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c index 1638e1d9f538..83e9e7750c8c 100644 --- a/drivers/media/dvb/ttpci/budget.c +++ b/drivers/media/dvb/ttpci/budget.c @@ -470,6 +470,7 @@ static void frontend_init(struct budget *budget) budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config, &budget->i2c_adap); if (budget->dvb_frontend) { budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params; + budget->dvb_frontend->tuner_priv = NULL; break; } break; -- cgit v1.2.1 From ba3ed4c57fde2df1a8a5b0c445ae5d685334e5f9 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 18 Jan 2009 15:08:33 -0300 Subject: V4L/DVB (10270): saa7146: fix unbalanced mutex_lock/unlock The default case of the switch didn't unlock the mutex. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/saa7146_video.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c index 6098b626811f..47fee05eaefb 100644 --- a/drivers/media/common/saa7146_video.c +++ b/drivers/media/common/saa7146_video.c @@ -576,6 +576,7 @@ static int set_control(struct saa7146_fh *fh, struct v4l2_control *c) vv->vflip = c->value; break; default: { + mutex_unlock(&dev->lock); return -EINVAL; } } -- cgit v1.2.1 From f0830ebec9993e76b6280e3abb93ceab57b2c923 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Tue, 13 Jan 2009 13:08:29 -0300 Subject: V4L/DVB (10287): af9015: fix second FE Bug causes 2nd FE MPEG TS buffer size to be zero and therefore no picture when 2nd FE was enabled. Configure correct buffer size also for 2nd FE. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/af9015.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index e1e9aa5c6b84..dbeaf79defd8 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -835,18 +835,19 @@ static int af9015_read_config(struct usb_device *udev) if (!dvb_usb_af9015_dual_mode) af9015_config.dual_mode = 0; - /* set buffer size according to USB port speed */ + /* Set adapter0 buffer size according to USB port speed, adapter1 buffer + size can be static because it is enabled only USB2.0 */ for (i = 0; i < af9015_properties_count; i++) { /* USB1.1 set smaller buffersize and disable 2nd adapter */ if (udev->speed == USB_SPEED_FULL) { - af9015_properties[i].adapter->stream.u.bulk.buffersize = - TS_USB11_MAX_PACKET_SIZE; + af9015_properties[i].adapter[0].stream.u.bulk.buffersize + = TS_USB11_MAX_PACKET_SIZE; /* disable 2nd adapter because we don't have PID-filters */ af9015_config.dual_mode = 0; } else { - af9015_properties[i].adapter->stream.u.bulk.buffersize = - TS_USB20_MAX_PACKET_SIZE; + af9015_properties[i].adapter[0].stream.u.bulk.buffersize + = TS_USB20_MAX_PACKET_SIZE; } } @@ -1254,6 +1255,12 @@ static struct dvb_usb_device_properties af9015_properties[] = { .type = USB_BULK, .count = 6, .endpoint = 0x85, + .u = { + .bulk = { + .buffersize = + TS_USB20_MAX_PACKET_SIZE, + } + } }, } }, @@ -1353,6 +1360,12 @@ static struct dvb_usb_device_properties af9015_properties[] = { .type = USB_BULK, .count = 6, .endpoint = 0x85, + .u = { + .bulk = { + .buffersize = + TS_USB20_MAX_PACKET_SIZE, + } + } }, } }, -- cgit v1.2.1 From d1a470fbd987b28e64287718917faf8caf67a055 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Tue, 20 Jan 2009 14:56:20 -0300 Subject: V4L/DVB (10288): af9015: bug fix: stick does not work always when plugged First control messages to the stick timeouts very often due to probable hw bug. Repeat first message few times if it fails as workaround. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/af9015.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index dbeaf79defd8..6a97a40d3dfb 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -694,7 +694,12 @@ static int af9015_read_config(struct usb_device *udev) /* IR remote controller */ req.addr = AF9015_EEPROM_IR_MODE; - ret = af9015_rw_udev(udev, &req); + /* first message will timeout often due to possible hw bug */ + for (i = 0; i < 4; i++) { + ret = af9015_rw_udev(udev, &req); + if (!ret) + break; + } if (ret) goto error; deb_info("%s: IR mode:%d\n", __func__, val); -- cgit v1.2.1 From 6d9f13c47a009ccbaf40c2e388ab349690dd8000 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 27 Jan 2009 06:20:34 -0300 Subject: V4L/DVB (10314): cx25840: ignore TUNER_SET_CONFIG in the command callback. These days TUNER_SET_CONFIG is broadcast to the other i2c devices and that triggers a fw load on the cx25840. Ignore this command since cx25840 isn't a tuner and you really do not want to load the firmware that early. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx25840/cx25840-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index b3b5b17dc8e7..25eb3bec9e5d 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -1383,7 +1383,7 @@ static int cx25840_log_status(struct v4l2_subdev *sd) static int cx25840_command(struct i2c_client *client, unsigned cmd, void *arg) { /* ignore this command */ - if (cmd == TUNER_SET_TYPE_ADDR) + if (cmd == TUNER_SET_TYPE_ADDR || cmd == TUNER_SET_CONFIG) return 0; /* Old-style drivers rely on initialization on first use, so -- cgit v1.2.1 From 7f03a5856c1c32ddc7b6b7a31bd43a4ab8e29f90 Mon Sep 17 00:00:00 2001 From: Alexey Klimov Date: Sun, 25 Jan 2009 20:07:28 -0300 Subject: V4L/DVB (10317): radio-mr800: fix radio->muted and radio->stereo Move radio->muted and radio->stereo in section where radio mutex is locked to avoid possible race condition problems or access to memory. Thanks to David Ellingsworth for pointing to this weak place in driver. Signed-off-by: Alexey Klimov Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-mr800.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c index 0747dc8862b0..fdfc7bf86b9e 100644 --- a/drivers/media/radio/radio-mr800.c +++ b/drivers/media/radio/radio-mr800.c @@ -194,10 +194,10 @@ static int amradio_start(struct amradio_device *radio) return retval; } - mutex_unlock(&radio->lock); - radio->muted = 0; + mutex_unlock(&radio->lock); + return retval; } @@ -230,10 +230,10 @@ static int amradio_stop(struct amradio_device *radio) return retval; } - mutex_unlock(&radio->lock); - radio->muted = 1; + mutex_unlock(&radio->lock); + return retval; } @@ -284,10 +284,10 @@ static int amradio_setfreq(struct amradio_device *radio, int freq) return retval; } - mutex_unlock(&radio->lock); - radio->stereo = 0; + mutex_unlock(&radio->lock); + return retval; } -- cgit v1.2.1 From 9c06210b89e604aa75314d3d173a93292b0d2777 Mon Sep 17 00:00:00 2001 From: Robert Krakora Date: Sun, 25 Jan 2009 13:08:07 -0300 Subject: V4L/DVB (10325): em28xx: Fix for fail to submit URB with IRQs and Pre-emption Disabled Trace: (Provided by Douglas) BUG: sleeping function called from invalid context at drivers/usb/core/urb.c:558 in_atomic():0, irqs_disabled():1 Pid: 4918, comm: sox Not tainted 2.6.27.5 #1 [] __might_sleep+0xc6/0xcb [] usb_kill_urb+0x1a/0xd8 [] ? __kmalloc+0x9b/0xfc [] ? __kmalloc+0xb8/0xfc [] ? usb_alloc_urb+0xf/0x31 [] em28xx_isoc_audio_deinit+0x2f/0x6c [em28xx_alsa] [] em28xx_cmd+0x1aa/0x1c5 [em28xx_alsa] [] snd_em28xx_capture_trigger+0x53/0x68 [em28xx_alsa] [] snd_pcm_do_start+0x1c/0x23 [snd_pcm] [] snd_pcm_action_single+0x25/0x4b [snd_pcm] [] snd_pcm_action+0x6a/0x76 [snd_pcm] [] snd_pcm_start+0x14/0x16 [snd_pcm] [] snd_pcm_lib_read1+0x66/0x273 [snd_pcm] [] ? snd_pcm_kernel_ioctl+0x46/0x5f [snd_pcm] [] snd_pcm_lib_read+0xbf/0xcd [snd_pcm] [] ? snd_pcm_lib_read_transfer+0x0/0xaf [snd_pcm] [] snd_pcm_oss_read3+0x99/0xdc [snd_pcm_oss] [] snd_pcm_oss_read2+0xa3/0xbf [snd_pcm_oss] [] ? _cond_resched+0x8/0x32 [] snd_pcm_oss_read+0x106/0x150 [snd_pcm_oss] [] ? snd_pcm_oss_read+0x0/0x150 [snd_pcm_oss] [] vfs_read+0x81/0xdc [] sys_read+0x3b/0x60 [] sysenter_do_call+0x12/0x34 ======================= The culprit in the trace is snd_pcm_action() which invokes a spin lock which disables pre-emption which disables an IRQ which causes the __might_sleep() function to fail the irqs_disabled() test. Since pre-emption is enabled then it is safe to de-allocate the memory if you first unlink each URB. In this instance you are safe since pre-emption is disabled. If pre-emption and irqs are not disabled then call usb_kill_urb(), else call usb_unlink_urb(). Thanks to Douglas for tracking down this bug originally!!! [dougsland@redhat.com: Fixed codyingstyle] Signed-off-by: Robert Krakora Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-audio.c | 9 ++++++--- drivers/media/video/em28xx/em28xx-core.c | 7 +++++-- 2 files changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index fcc300c93995..5d882a44e3ee 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -62,12 +62,15 @@ static int em28xx_isoc_audio_deinit(struct em28xx *dev) dprintk("Stopping isoc\n"); for (i = 0; i < EM28XX_AUDIO_BUFS; i++) { - usb_kill_urb(dev->adev.urb[i]); + if (!irqs_disabled()) + usb_kill_urb(dev->adev.urb[i]); + else + usb_unlink_urb(dev->adev.urb[i]); usb_free_urb(dev->adev.urb[i]); dev->adev.urb[i] = NULL; - kfree(dev->adev.transfer_buffer[i]); - dev->adev.transfer_buffer[i] = NULL; + kfree(dev->adev.transfer_buffer[i]); + dev->adev.transfer_buffer[i] = NULL; } return 0; diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index 71ad35192c06..94fb1b639a2e 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -860,8 +860,11 @@ void em28xx_uninit_isoc(struct em28xx *dev) for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { urb = dev->isoc_ctl.urb[i]; if (urb) { - usb_kill_urb(urb); - usb_unlink_urb(urb); + if (!irqs_disabled()) + usb_kill_urb(urb); + else + usb_unlink_urb(urb); + if (dev->isoc_ctl.transfer_buffer[i]) { usb_buffer_free(dev->udev, urb->transfer_buffer_length, -- cgit v1.2.1 From 2fd9c2eac31d8b3c1b719c7dfbbfed17c5cbccc4 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Sat, 24 Jan 2009 07:45:14 -0300 Subject: V4L/DVB (10385): gspca - main: Fix memory leak when USB disconnection while streaming. Resetting the streaming flag on disconnection prevented the URBs to be freed when streaming was active. Also, USBs cannot be killed after disconnection (oops in [usbcore] unlink1). Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 5e36b9a4ae3e..2ed24527ecd6 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -423,7 +423,8 @@ static void destroy_urbs(struct gspca_dev *gspca_dev) break; gspca_dev->urb[i] = NULL; - usb_kill_urb(urb); + if (!gspca_dev->present) + usb_kill_urb(urb); if (urb->transfer_buffer != NULL) usb_buffer_free(gspca_dev->dev, urb->transfer_buffer_length, @@ -1950,7 +1951,6 @@ void gspca_disconnect(struct usb_interface *intf) struct gspca_dev *gspca_dev = usb_get_intfdata(intf); gspca_dev->present = 0; - gspca_dev->streaming = 0; usb_set_intfdata(intf, NULL); -- cgit v1.2.1 From 2c1a3c979ce66e3073c1b87373c0c01a95f847e6 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 12 Jan 2009 18:10:43 -0300 Subject: V4L/DVB (10229): ivtv: fix memory leak Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-driver.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index e8e5921cdc34..c46c990987f9 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -949,8 +949,10 @@ static int __devinit ivtv_probe(struct pci_dev *dev, itv->instance = atomic_inc_return(&ivtv_instance) - 1; retval = v4l2_device_register(&dev->dev, &itv->device); - if (retval) + if (retval) { + kfree(itv); return retval; + } /* "ivtv + PCI ID" is a bit of a mouthful, so use "ivtv + instance" instead. */ snprintf(itv->device.name, sizeof(itv->device.name), -- cgit v1.2.1 From 618b2c8db24522ae273d8299c6a936ea13793c4d Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Wed, 28 Jan 2009 16:50:20 -0800 Subject: xen: make sysfs files behave as their names suggest 1: make "target_kb" only accept and produce a memory size in kilobytes. 2: add a second "target" file which produces output in bytes, and will accept memparse input (scaled bytes) This fixes the rather irritating problem that writing the same value read back into target_kb would end up shrinking the domain by a factor of 1024, with generally bad results. Signed-off-by: Jeremy Fitzhardinge Cc: Stable Kernel Cc: "dan.magenheimer@oracle.com" Signed-off-by: Ingo Molnar --- drivers/xen/balloon.c | 33 ++++++++++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-) diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index 2ba8f95516a0..efa4b363ce72 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -498,7 +498,7 @@ static ssize_t store_target_kb(struct sys_device *dev, if (!capable(CAP_SYS_ADMIN)) return -EPERM; - target_bytes = memparse(buf, &endchar); + target_bytes = simple_strtoull(buf, &endchar, 0) * 1024; balloon_set_new_target(target_bytes >> PAGE_SHIFT); @@ -508,8 +508,39 @@ static ssize_t store_target_kb(struct sys_device *dev, static SYSDEV_ATTR(target_kb, S_IRUGO | S_IWUSR, show_target_kb, store_target_kb); + +static ssize_t show_target(struct sys_device *dev, struct sysdev_attribute *attr, + char *buf) +{ + return sprintf(buf, "%llu\n", + (u64)balloon_stats.target_pages << PAGE_SHIFT); +} + +static ssize_t store_target(struct sys_device *dev, + struct sysdev_attribute *attr, + const char *buf, + size_t count) +{ + char *endchar; + unsigned long long target_bytes; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + target_bytes = memparse(buf, &endchar); + + balloon_set_new_target(target_bytes >> PAGE_SHIFT); + + return count; +} + +static SYSDEV_ATTR(target, S_IRUGO | S_IWUSR, + show_target, store_target); + + static struct sysdev_attribute *balloon_attrs[] = { &attr_target_kb, + &attr_target, }; static struct attribute *balloon_info_attrs[] = { -- cgit v1.2.1 From 9e70c1f099c6977d3928879e64fa6af7f903b7b0 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 29 Jan 2009 13:08:20 +0000 Subject: ASoC: Fix null string usage with WM8753 DAIs The WM8753 driver multiplexes the DAI structures it exposes to the outside world, leaving them uninitialised until the codec probes. Since the DAI name is used during the registration and setup process provide a dummy name. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8753.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c index 6c21b50c9375..77620ab98756 100644 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c @@ -1451,7 +1451,14 @@ static const struct snd_soc_dai wm8753_all_dai[] = { }, }; -struct snd_soc_dai wm8753_dai[2]; +struct snd_soc_dai wm8753_dai[] = { + { + .name = "WM8753 DAI 0", + }, + { + .name = "WM8753 DAI 1", + }, +}; EXPORT_SYMBOL_GPL(wm8753_dai); static void wm8753_set_dai_mode(struct snd_soc_codec *codec, unsigned int mode) -- cgit v1.2.1 From ef390c0b6e3f4d2d2d43f53f4bd35e1884571a14 Mon Sep 17 00:00:00 2001 From: Misael Lopez Cruz Date: Thu, 29 Jan 2009 13:29:46 +0200 Subject: ASoC: OMAP: Initialize XCCR and RCCR registers in McBSP DAI driver This patch explicitly initializes McBSP Transmit Configuration Control Register (XCCR) and Receive Configuration Control Register (RCCR) to their reset values. Reset values are 26 ns of DX delay and Transmit DMA disabled for XCCR register; receive full cycle mode enabled and Receive DMA disabled for RCCR register. This patch requires a counterpart in OMAP McBSP driver before to apply it. The required changes in McBSP were sent and approved in linux-omap mailing list and patch is going upstream (commit 3127f8f8595a064b3f1a1837fea2177902589ac3 from linux-omap-2.6 tree). Signed-off-by: Misael Lopez Cruz [ jarkko.nikula@nokia.com: Commit id for counterpart patch corrected ] Signed-off-by: Jarkko Nikula Signed-off-by: Mark Brown --- sound/soc/omap/omap-mcbsp.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index ec5e18a78758..05dd5abcddf4 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -302,6 +302,10 @@ static int omap_mcbsp_dai_set_dai_fmt(struct snd_soc_dai *cpu_dai, regs->spcr1 |= RINTM(3); regs->rcr2 |= RFIG; regs->xcr2 |= XFIG; + if (cpu_is_omap2430() || cpu_is_omap34xx()) { + regs->xccr = DXENDLY(1) | XDMAEN; + regs->rccr = RFULL_CYCLE | RDMAEN; + } switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_I2S: -- cgit v1.2.1 From c8c4707cf7ca8ff7dcc1653447e48cb3de0bf114 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Thu, 29 Jan 2009 00:11:59 +0100 Subject: firewire: sbp2: add workarounds for 2nd and 3rd generation iPods According to https://bugs.launchpad.net/bugs/294391 - 3rd generation iPods need the "fix capacity" workaround after all (apparently they crash after the last sector was accessed), - 2nd generation iPods need the "128 kB maximum request size" workaround. Alas both iPod generations feature the same model ID in the config ROM, hence we can only define a shared quirks list entry for them. Luckily the fix capacity workaround did not show a negative effect in Jarod's tests with 2nd gen. iPod. A side note: Apple computers in target mode (or at least an x86 Mac mini) don't have firmware_version and model_id, hence none of the iPod quirks list entries is active for them. Tested-by: Jarod Wilson Acked-by: Jarod Wilson Signed-off-by: Stefan Richter --- drivers/firewire/fw-sbp2.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index 6635925a3758..c71c4419d9e8 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -360,15 +360,17 @@ static const struct { .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, }, - /* - * There are iPods (2nd gen, 3rd gen) with model_id == 0, but - * these iPods do not feature the read_capacity bug according - * to one report. Read_capacity behaviour as well as model_id - * could change due to Apple-supplied firmware updates though. + * iPod 2nd generation: needs 128k max transfer size workaround + * iPod 3rd generation: needs fix capacity workaround */ - - /* iPod 4th generation. */ { + { + .firmware_revision = 0x0a2700, + .model = 0x000000, + .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS | + SBP2_WORKAROUND_FIX_CAPACITY, + }, + /* iPod 4th generation */ { .firmware_revision = 0x0a2700, .model = 0x000021, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, -- cgit v1.2.1 From 1448d7c6a2ff96d3b52ecae49e2d0f046a097fe0 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Thu, 29 Jan 2009 00:13:20 +0100 Subject: ieee1394: sbp2: add workarounds for 2nd and 3rd generation iPods as per https://bugs.launchpad.net/bugs/294391. These got one sample of each iPod generation going. However there still occurred I/O stalls with the 3rd generation iPod which remain undiagnosed at the time of this writing. Acked-by: Jarod Wilson Signed-off-by: Stefan Richter --- drivers/ieee1394/sbp2.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index fb8f9f4430ad..f3fd8657ce4b 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -395,6 +395,16 @@ static const struct { .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, }, + /* + * iPod 2nd generation: needs 128k max transfer size workaround + * iPod 3rd generation: needs fix capacity workaround + */ + { + .firmware_revision = 0x0a2700, + .model = 0x000000, + .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS | + SBP2_WORKAROUND_FIX_CAPACITY, + }, /* iPod 4th generation */ { .firmware_revision = 0x0a2700, .model = 0x000021, -- cgit v1.2.1 From e6a271651e9e7810c1802bb8375967f6efa4baea Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 26 Jan 2009 19:35:28 +0100 Subject: mac80211: remove Michael Wu as maintainer His email address keeps bouncing, and he's not interested in mac80211 patches etc. anyway. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- MAINTAINERS | 2 -- 1 file changed, 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index d992d407197b..474ec0c53272 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2836,8 +2836,6 @@ S: Maintained MAC80211 P: Johannes Berg M: johannes@sipsolutions.net -P: Michael Wu -M: flamingice@sourmilk.net L: linux-wireless@vger.kernel.org W: http://linuxwireless.org/ T: git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6.git -- cgit v1.2.1 From eb83bbf57429ab80f49b413e3e44d3b19c3fdc5a Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Tue, 27 Jan 2009 12:31:23 -0600 Subject: rtl8187: Fix error in setting OFDM power settings for RTL8187L MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit After reports of poor performance, a review of the latest vendor driver (rtl8187_linux_26.1025.0328.2007) for RTL8187L devices was undertaken. A difference was found in the code used to index the OFDM power tables. When the Linux driver was changed, my unit works at a much greater range than before. I think this fixes Bugzilla #12380 and has been tested by at least two other users. Signed-off-by: Larry Finger Tested-by: Martín Ernesto Barreyro Cc: Stable Signed-off-by: John W. Linville --- drivers/net/wireless/rtl818x/rtl8187_rtl8225.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c index 4e75e8e7fa90..78df281b297a 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c +++ b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c @@ -285,7 +285,10 @@ static void rtl8225_rf_set_tx_power(struct ieee80211_hw *dev, int channel) ofdm_power = priv->channels[channel - 1].hw_value >> 4; cck_power = min(cck_power, (u8)11); - ofdm_power = min(ofdm_power, (u8)35); + if (ofdm_power > (u8)15) + ofdm_power = 25; + else + ofdm_power += 10; rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, rtl8225_tx_gain_cck_ofdm[cck_power / 6] >> 1); @@ -536,7 +539,10 @@ static void rtl8225z2_rf_set_tx_power(struct ieee80211_hw *dev, int channel) cck_power += priv->txpwr_base & 0xF; cck_power = min(cck_power, (u8)35); - ofdm_power = min(ofdm_power, (u8)15); + if (ofdm_power > (u8)15) + ofdm_power = 25; + else + ofdm_power += 10; ofdm_power += priv->txpwr_base >> 4; ofdm_power = min(ofdm_power, (u8)35); -- cgit v1.2.1 From 1f304e4e3bb161163d9f5bc3c6467a2a6fa9b3ae Mon Sep 17 00:00:00 2001 From: "Zhu, Yi" Date: Fri, 23 Jan 2009 13:45:22 -0800 Subject: iwlwifi: fix kernel oops when ucode DMA memory allocation failure The patch fixes memcpy to NULL address when the ucode DMA allocation failure. This is a fix to bug http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1861 Signed-off-by: Zhu Yi Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 0dc8eed16404..b35c8813bef4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1719,6 +1719,10 @@ static int iwl_read_ucode(struct iwl_priv *priv) priv->ucode_data_backup.len = data_size; iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup); + if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr || + !priv->ucode_data_backup.v_addr) + goto err_pci_alloc; + /* Initialization instructions and data */ if (init_size && init_data_size) { priv->ucode_init.len = init_size; -- cgit v1.2.1 From 615aab4b75dfa77b00c372330d6f70edd2458bf9 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 22 Jan 2009 15:05:46 -0800 Subject: cfg80211: Fix sanity check on 5 GHz when processing country IE This fixes two issues with the sanity check loop when processing the country IE: 1. Do not use frequency for the current subband channel check, this was a big fat typo. 2. Apply the 5 GHz 4-channel steps when considering max channel on each subband as was done with a recent patch. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- net/wireless/reg.c | 30 +++++++++++++++++++----------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index bc494cef2102..61698095e1ad 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -498,6 +498,7 @@ static struct ieee80211_regdomain *country_ie_2_rd( * calculate the number of reg rules we will need. We will need one * for each channel subband */ while (country_ie_len >= 3) { + int end_channel = 0; struct ieee80211_country_ie_triplet *triplet = (struct ieee80211_country_ie_triplet *) country_ie; int cur_sub_max_channel = 0, cur_channel = 0; @@ -509,9 +510,25 @@ static struct ieee80211_regdomain *country_ie_2_rd( continue; } + /* 2 GHz */ + if (triplet->chans.first_channel <= 14) + end_channel = triplet->chans.first_channel + + triplet->chans.num_channels; + else + /* + * 5 GHz -- For example in country IEs if the first + * channel given is 36 and the number of channels is 4 + * then the individual channel numbers defined for the + * 5 GHz PHY by these parameters are: 36, 40, 44, and 48 + * and not 36, 37, 38, 39. + * + * See: http://tinyurl.com/11d-clarification + */ + end_channel = triplet->chans.first_channel + + (4 * (triplet->chans.num_channels - 1)); + cur_channel = triplet->chans.first_channel; - cur_sub_max_channel = ieee80211_channel_to_frequency( - cur_channel + triplet->chans.num_channels); + cur_sub_max_channel = end_channel; /* Basic sanity check */ if (cur_sub_max_channel < cur_channel) @@ -590,15 +607,6 @@ static struct ieee80211_regdomain *country_ie_2_rd( end_channel = triplet->chans.first_channel + triplet->chans.num_channels; else - /* - * 5 GHz -- For example in country IEs if the first - * channel given is 36 and the number of channels is 4 - * then the individual channel numbers defined for the - * 5 GHz PHY by these parameters are: 36, 40, 44, and 48 - * and not 36, 37, 38, 39. - * - * See: http://tinyurl.com/11d-clarification - */ end_channel = triplet->chans.first_channel + (4 * (triplet->chans.num_channels - 1)); -- cgit v1.2.1 From 667ecd010d870f861a9e276aaaca8cb443ded8b3 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 22 Jan 2009 15:05:43 -0800 Subject: cfg80211: print correct intersected regulatory domain When CONFIG_CFG80211_REG_DEBUG is enabled and an intersection occurs we are printing the regulatory domain passed by CRDA and indicating its the intersected regulatory domain. Lets fix this and print the intersection as originally intended. Signed-off-by: Luis R. Rodriguez Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/reg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 61698095e1ad..85c9034c59b2 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1284,7 +1284,7 @@ static void reg_country_ie_process_debug( if (intersected_rd) { printk(KERN_DEBUG "cfg80211: We intersect both of these " "and get:\n"); - print_regdomain_info(rd); + print_regdomain_info(intersected_rd); return; } printk(KERN_DEBUG "cfg80211: Intersection between both failed\n"); -- cgit v1.2.1 From be0093705c3ce98d73cac0ca8f93ea105cdf4e9c Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Thu, 22 Jan 2009 08:44:16 -0500 Subject: ath5k: fix locking in ath5k_config ath5k_config updates the software context without taking sc->lock. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland Acked-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 8ef87356e083..a533ed60bb4d 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -1028,6 +1028,8 @@ ath5k_setup_bands(struct ieee80211_hw *hw) * it's done by reseting the chip. To accomplish this we must * first cleanup any pending DMA, then restart stuff after a la * ath5k_init. + * + * Called with sc->lock. */ static int ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan) @@ -2814,11 +2816,17 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed) { struct ath5k_softc *sc = hw->priv; struct ieee80211_conf *conf = &hw->conf; + int ret; + + mutex_lock(&sc->lock); sc->bintval = conf->beacon_int; sc->power_level = conf->power_level; - return ath5k_chan_set(sc, conf->channel); + ret = ath5k_chan_set(sc, conf->channel); + + mutex_unlock(&sc->lock); + return ret; } static int -- cgit v1.2.1 From e125646ab56b490d0390b158e0afa9cccfc1f897 Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Thu, 29 Jan 2009 16:05:19 -0800 Subject: netxen: revert jumbo ringsize Reducing jumbo ring size below 1024 reduces throughput for old firmwares (3.4.216 and older) running on older (NX2031) chip, so restore it back to 1024. This was reduced in commit 32ec803348b4d5f1353e1d7feae30880b8b3e342 ("netxen: reduce memory footprint"). Raising jumbo ring size from 512 to 1024, adds ~4MB per port, but there's still big saving because of original patch (~20MB per port). Signed-off-by: Dhananjay Phadke Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h index a75a31005fd3..9c78c963b721 100644 --- a/drivers/net/netxen/netxen_nic.h +++ b/drivers/net/netxen/netxen_nic.h @@ -210,7 +210,7 @@ #define MAX_CMD_DESCRIPTORS_HOST 1024 #define MAX_RCV_DESCRIPTORS_1G 2048 #define MAX_RCV_DESCRIPTORS_10G 4096 -#define MAX_JUMBO_RCV_DESCRIPTORS 512 +#define MAX_JUMBO_RCV_DESCRIPTORS 1024 #define MAX_LRO_RCV_DESCRIPTORS 8 #define MAX_RCVSTATUS_DESCRIPTORS MAX_RCV_DESCRIPTORS #define MAX_JUMBO_RCV_DESC MAX_JUMBO_RCV_DESCRIPTORS -- cgit v1.2.1 From 95e3b24cfb4ec0479d2c42f7a1780d68063a542a Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Thu, 29 Jan 2009 16:07:52 -0800 Subject: net: Fix frag_list handling in skb_seq_read The frag_list handling was broken in skb_seq_read: 1) We didn't add the stepped offset when looking at the head are of fragments other than the first. 2) We didn't take the stepped offset away when setting the data pointer in the head area. 3) The frag index wasn't reset. This patch fixes both issues. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/core/skbuff.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 2e5f2ca3bdcd..f23fd43539ed 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -2212,10 +2212,10 @@ unsigned int skb_seq_read(unsigned int consumed, const u8 **data, return 0; next_skb: - block_limit = skb_headlen(st->cur_skb); + block_limit = skb_headlen(st->cur_skb) + st->stepped_offset; if (abs_offset < block_limit) { - *data = st->cur_skb->data + abs_offset; + *data = st->cur_skb->data + (abs_offset - st->stepped_offset); return block_limit - abs_offset; } @@ -2257,6 +2257,7 @@ next_skb: } else if (st->root_skb == st->cur_skb && skb_shinfo(st->root_skb)->frag_list) { st->cur_skb = skb_shinfo(st->root_skb)->frag_list; + st->frag_idx = 0; goto next_skb; } -- cgit v1.2.1 From d35ec494a68218d646f31d8b4f03ddd39b262a3e Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 29 Jan 2009 17:08:38 -0700 Subject: powerpc/5200: update defconfigs Signed-off-by: Grant Likely --- arch/powerpc/configs/52xx/cm5200_defconfig | 83 ++++++++++++++------ arch/powerpc/configs/52xx/lite5200b_defconfig | 86 +++++++++++++++------ arch/powerpc/configs/52xx/motionpro_defconfig | 85 +++++++++++++++------ arch/powerpc/configs/52xx/pcm030_defconfig | 82 +++++++++++++------- arch/powerpc/configs/52xx/tqm5200_defconfig | 89 ++++++++++++++++------ arch/powerpc/configs/mpc5200_defconfig | 104 +++++++++++++++++++------- 6 files changed, 386 insertions(+), 143 deletions(-) diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig index 99c495ad9c75..1239c6132b4a 100644 --- a/arch/powerpc/configs/52xx/cm5200_defconfig +++ b/arch/powerpc/configs/52xx/cm5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc4 -# Thu Nov 13 02:12:40 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 21:41:58 2009 # # CONFIG_PPC64 is not set @@ -43,7 +43,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -71,14 +71,23 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -110,7 +119,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -121,13 +129,11 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -143,7 +149,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -182,9 +187,8 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_TAU is not set # CONFIG_FSL_ULI1575 is not set CONFIG_PPC_BESTCOMM=y -# CONFIG_PPC_BESTCOMM_ATA is not set CONFIG_PPC_BESTCOMM_FEC=y -# CONFIG_PPC_BESTCOMM_GEN_BD is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -211,6 +215,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -222,12 +227,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -268,6 +275,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -324,6 +332,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -336,6 +345,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -426,6 +436,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + # # UBI - Unsorted block images # @@ -514,6 +530,9 @@ CONFIG_LXT_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -538,6 +557,10 @@ CONFIG_FEC_MPC52xx_MDIO=y # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + # # USB Network Adapters # @@ -588,8 +611,10 @@ CONFIG_SERIAL_MPC52xx=y CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=57600 CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -629,8 +654,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -675,10 +698,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # @@ -736,6 +761,7 @@ CONFIG_USB_DEVICEFS=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -760,18 +786,17 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -817,6 +842,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -826,7 +855,6 @@ CONFIG_USB_STORAGE=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -847,6 +875,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -883,10 +912,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -906,6 +932,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1002,6 +1029,7 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1053,6 +1081,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1061,6 +1090,8 @@ CONFIG_SCHED_DEBUG=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1069,11 +1100,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1100,11 +1133,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig index 9796220032fd..b7b880562906 100644 --- a/arch/powerpc/configs/52xx/lite5200b_defconfig +++ b/arch/powerpc/configs/52xx/lite5200b_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc4 -# Thu Nov 13 02:10:16 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 21:41:14 2009 # # CONFIG_PPC64 is not set @@ -43,7 +43,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -72,14 +72,23 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -112,7 +121,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -123,7 +131,6 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -131,11 +138,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -151,7 +156,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y CONFIG_FREEZER=y # @@ -192,7 +196,7 @@ CONFIG_PPC_LITE5200=y CONFIG_PPC_BESTCOMM=y CONFIG_PPC_BESTCOMM_ATA=y CONFIG_PPC_BESTCOMM_FEC=y -CONFIG_PPC_BESTCOMM_GEN_BD=y +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -220,6 +224,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -231,12 +236,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -264,6 +271,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -286,6 +294,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -342,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -354,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -396,13 +407,19 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -445,6 +462,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -461,6 +479,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -580,6 +600,9 @@ CONFIG_LXT_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -626,6 +649,7 @@ CONFIG_NETDEV_1000=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -648,6 +672,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -695,8 +723,10 @@ CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -762,8 +792,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -796,10 +824,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # @@ -846,9 +876,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -860,7 +894,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -881,6 +914,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -914,10 +948,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -926,6 +957,7 @@ CONFIG_TMPFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -967,6 +999,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1016,6 +1049,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1024,6 +1058,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1032,11 +1068,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1063,11 +1101,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig index d081e0031057..fb10f22fd0d2 100644 --- a/arch/powerpc/configs/52xx/motionpro_defconfig +++ b/arch/powerpc/configs/52xx/motionpro_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc4 -# Thu Nov 13 02:11:02 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 21:42:29 2009 # # CONFIG_PPC64 is not set @@ -43,7 +43,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -71,14 +71,23 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -110,7 +119,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -121,13 +129,11 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -143,7 +149,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -182,9 +187,9 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_TAU is not set # CONFIG_FSL_ULI1575 is not set CONFIG_PPC_BESTCOMM=y -# CONFIG_PPC_BESTCOMM_ATA is not set +CONFIG_PPC_BESTCOMM_ATA=y CONFIG_PPC_BESTCOMM_FEC=y -# CONFIG_PPC_BESTCOMM_GEN_BD is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -211,6 +216,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -222,12 +228,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -268,6 +276,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -324,6 +333,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -336,6 +346,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -426,6 +437,12 @@ CONFIG_MTD_ROM=y # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + # # UBI - Unsorted block images # @@ -447,10 +464,16 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -492,6 +515,7 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set CONFIG_ATA=y @@ -525,6 +549,9 @@ CONFIG_SMSC_PHY=y CONFIG_BROADCOM_PHY=y CONFIG_ICPLUS_PHY=y # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set CONFIG_MDIO_BITBANG=y CONFIG_NET_ETHERNET=y @@ -548,6 +575,10 @@ CONFIG_FEC_MPC52xx_MDIO=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -590,8 +621,10 @@ CONFIG_SERIAL_MPC52xx=y CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -629,8 +662,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -659,6 +690,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -678,6 +710,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -721,10 +754,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # @@ -835,7 +870,6 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -856,6 +890,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -892,10 +927,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -915,6 +947,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1011,6 +1044,7 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1062,6 +1096,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1070,6 +1105,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1078,11 +1115,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1109,11 +1148,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig index b21b8e8c3a78..00944c09a0ae 100644 --- a/arch/powerpc/configs/52xx/pcm030_defconfig +++ b/arch/powerpc/configs/52xx/pcm030_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc4 -# Thu Nov 13 02:13:16 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 21:41:33 2009 # # CONFIG_PPC64 is not set @@ -43,7 +43,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -72,15 +72,24 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -112,7 +121,6 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -124,7 +132,6 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -132,11 +139,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -152,7 +157,6 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -191,9 +195,9 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_TAU is not set # CONFIG_FSL_ULI1575 is not set CONFIG_PPC_BESTCOMM=y -CONFIG_PPC_BESTCOMM_ATA=y +CONFIG_PPC_BESTCOMM_ATA=m CONFIG_PPC_BESTCOMM_FEC=y -CONFIG_PPC_BESTCOMM_GEN_BD=y +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -212,7 +216,6 @@ CONFIG_SCHED_HRTICK=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -# CONFIG_PREEMPT_RCU is not set CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set @@ -222,6 +225,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -233,12 +237,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -261,6 +267,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -283,6 +290,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -333,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -345,6 +354,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -365,6 +375,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -413,9 +424,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=1 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_PHYSMAP_OF is not set # CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set @@ -438,6 +447,12 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + # # UBI - Unsorted block images # @@ -587,6 +602,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -620,6 +638,10 @@ CONFIG_FEC_MPC52xx_MDIO=y # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + # # USB Network Adapters # @@ -675,7 +697,9 @@ CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=9600 # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -740,8 +764,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -774,10 +796,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # @@ -837,6 +861,7 @@ CONFIG_USB_DEVICEFS=y # # CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m @@ -864,18 +889,17 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -921,6 +945,10 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -983,7 +1011,6 @@ CONFIG_RTC_DRV_PCF8563=m # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -1004,6 +1031,7 @@ CONFIG_FS_MBCACHE=m CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set @@ -1039,10 +1067,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1062,6 +1087,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1141,6 +1167,7 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1173,6 +1200,8 @@ CONFIG_FRAME_WARN=1024 # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1180,6 +1209,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig index 79954579f5ec..65237ad6f07e 100644 --- a/arch/powerpc/configs/52xx/tqm5200_defconfig +++ b/arch/powerpc/configs/52xx/tqm5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc4 -# Thu Nov 13 02:09:30 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 21:42:58 2009 # # CONFIG_PPC64 is not set @@ -43,7 +43,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -71,14 +71,23 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -110,7 +119,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -121,7 +129,6 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -129,11 +136,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -149,7 +154,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -188,9 +192,9 @@ CONFIG_PPC_MPC5200_BUGFIX=y # CONFIG_TAU is not set # CONFIG_FSL_ULI1575 is not set CONFIG_PPC_BESTCOMM=y -# CONFIG_PPC_BESTCOMM_ATA is not set +CONFIG_PPC_BESTCOMM_ATA=y CONFIG_PPC_BESTCOMM_FEC=y -# CONFIG_PPC_BESTCOMM_GEN_BD is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -217,6 +221,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -228,12 +233,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -274,6 +281,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -330,6 +338,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -342,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -364,6 +374,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -432,6 +443,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + # # UBI - Unsorted block images # @@ -496,6 +513,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set CONFIG_ATA=y @@ -530,6 +548,9 @@ CONFIG_LXT_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -554,6 +575,10 @@ CONFIG_FEC_MPC52xx_MDIO=y # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + # # USB Network Adapters # @@ -604,8 +629,10 @@ CONFIG_SERIAL_MPC52xx=y CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -645,8 +672,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -675,6 +700,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -694,6 +720,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -742,10 +769,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # @@ -803,6 +832,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -827,18 +857,17 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -884,6 +913,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -947,7 +980,6 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -968,6 +1000,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1004,10 +1037,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1027,6 +1057,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1123,6 +1154,7 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1174,6 +1206,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1182,6 +1215,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1190,11 +1225,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1221,11 +1258,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig index 5ff3de205d6a..81afc8b373d7 100644 --- a/arch/powerpc/configs/mpc5200_defconfig +++ b/arch/powerpc/configs/mpc5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc4 -# Thu Nov 13 02:09:07 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 21:40:44 2009 # # CONFIG_PPC64 is not set @@ -43,7 +43,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -72,10 +72,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -108,7 +117,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -119,7 +127,6 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -127,11 +134,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,7 +152,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y CONFIG_FREEZER=y # @@ -192,7 +196,7 @@ CONFIG_RTAS_PROC=y CONFIG_PPC_BESTCOMM=y CONFIG_PPC_BESTCOMM_ATA=y CONFIG_PPC_BESTCOMM_FEC=y -CONFIG_PPC_BESTCOMM_GEN_BD=y +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -220,6 +224,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -231,12 +236,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -264,6 +271,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -286,6 +294,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -342,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -354,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -376,6 +387,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -446,6 +458,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + # # UBI - Unsorted block images # @@ -474,13 +492,19 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -539,6 +563,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -659,6 +685,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -692,6 +721,10 @@ CONFIG_FEC_MPC52xx_MDIO=y # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + # # USB Network Adapters # @@ -774,9 +807,11 @@ CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_RTAS is not set +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -844,8 +879,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -874,6 +907,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -894,6 +928,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -953,10 +988,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # @@ -1051,7 +1088,7 @@ CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_ILI9320 is not set # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_CORGI is not set +CONFIG_BACKLIGHT_GENERIC=y # # Display device support @@ -1093,21 +1130,22 @@ CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y # CONFIG_HID_APPLE is not set CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y # CONFIG_HID_CHICONY is not set CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y CONFIG_HID_EZKEY=y # CONFIG_HID_GYRATION is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MICROSOFT is not set # CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set # CONFIG_HID_PANTHERLORD is not set # CONFIG_HID_PETALYNX is not set # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SONY is not set # CONFIG_HID_SUNPLUS is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set # CONFIG_THRUSTMASTER_FF is not set # CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y @@ -1137,6 +1175,7 @@ CONFIG_USB_MON=y # # CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -1164,18 +1203,17 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1222,6 +1260,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1243,7 +1285,6 @@ CONFIG_NEW_LEDS=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -1264,6 +1305,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1300,10 +1342,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1323,6 +1362,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1403,6 +1443,7 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1454,6 +1495,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1462,6 +1504,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1470,11 +1514,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1501,11 +1547,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set -- cgit v1.2.1 From e489a44e2473981474fe17f17418828ba341661a Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 29 Jan 2009 17:08:41 -0700 Subject: powerpc/5200: Bugfix for PCI mapping of memory and IMMR This patch ensures that memory gets properly mapped into the PCI address space. Without this patch, the memory window BAR is left at whatever value happened to be loaded into the BAR when Linux was booted. Without this patch, memory could end up getting mapped at any of the 1G address boundaries instead of at '0' where Linux expects it. Similarly, this patch also ensures that the internally memory mapped registers (IMMR) are mapped to the correct PCI address range. Without this patch, PCI appears to work correctly until a PCI device is inserted which DMAs into memory. Signed-off-by: Grant Likely Tested-by: Wolfram Sang --- arch/powerpc/platforms/52xx/mpc52xx_pci.c | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-) diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c index c3f2c21024e3..87ff522f28b5 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c @@ -19,14 +19,6 @@ #include -/* ======================================================================== */ -/* PCI windows config */ -/* ======================================================================== */ - -#define MPC52xx_PCI_TARGET_IO 0xf0000000 -#define MPC52xx_PCI_TARGET_MEM 0x00000000 - - /* ======================================================================== */ /* Structures mapping & Defines for PCI Unit */ /* ======================================================================== */ @@ -244,7 +236,7 @@ static struct pci_ops mpc52xx_pci_ops = { static void __init mpc52xx_pci_setup(struct pci_controller *hose, - struct mpc52xx_pci __iomem *pci_regs) + struct mpc52xx_pci __iomem *pci_regs, phys_addr_t pci_phys) { struct resource *res; u32 tmp; @@ -314,10 +306,14 @@ mpc52xx_pci_setup(struct pci_controller *hose, /* Set all the IWCR fields at once; they're in the same reg */ out_be32(&pci_regs->iwcr, MPC52xx_PCI_IWCR_PACK(iwcr0, iwcr1, iwcr2)); - out_be32(&pci_regs->tbatr0, - MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_IO ); - out_be32(&pci_regs->tbatr1, - MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_MEM ); + /* Map IMMR onto PCI bus */ + pci_phys &= 0xfffc0000; /* bar0 has only 14 significant bits */ + out_be32(&pci_regs->tbatr0, MPC52xx_PCI_TBATR_ENABLE | pci_phys); + out_be32(&pci_regs->bar0, PCI_BASE_ADDRESS_MEM_PREFETCH | pci_phys); + + /* Map memory onto PCI bus */ + out_be32(&pci_regs->tbatr1, MPC52xx_PCI_TBATR_ENABLE); + out_be32(&pci_regs->bar1, PCI_BASE_ADDRESS_MEM_PREFETCH); out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD | MPC52xx_PCI_TCR_WCT8); @@ -414,7 +410,7 @@ mpc52xx_add_bridge(struct device_node *node) /* Finish setting up PCI using values obtained by * pci_proces_bridge_OF_ranges */ - mpc52xx_pci_setup(hose, pci_regs); + mpc52xx_pci_setup(hose, pci_regs, rsrc.start); return 0; } -- cgit v1.2.1 From 71b3346d182355f19509fadb8fe45114a35cc499 Mon Sep 17 00:00:00 2001 From: Shyam Iyer Date: Thu, 29 Jan 2009 16:12:42 -0800 Subject: net: Fix OOPS in skb_seq_read(). It oopsd for me in skb_seq_read. addr2line said it was linux-2.6/net/core/skbuff.c:2228, which is this line: while (st->frag_idx < skb_shinfo(st->cur_skb)->nr_frags) { I added some printks in there and it looks like we hit this: } else if (st->root_skb == st->cur_skb && skb_shinfo(st->root_skb)->frag_list) { st->cur_skb = skb_shinfo(st->root_skb)->frag_list; st->frag_idx = 0; goto next_skb; } Actually I did some testing and added a few printks and found that the st->cur_skb->data was 0 and hence the ptr used by iscsi_tcp was null. This caused the kernel panic. if (abs_offset < block_limit) { - *data = st->cur_skb->data + abs_offset; + *data = st->cur_skb->data + (abs_offset - st->stepped_offset); I enabled the debug_tcp and with a few printks found that the code did not go to the next_skb label and could find that the sequence being followed was this - It hit this if condition - if (st->cur_skb->next) { st->cur_skb = st->cur_skb->next; st->frag_idx = 0; goto next_skb; And so, now the st pointer is shifted to the next skb whereas actually it should have hit the second else if first since the data is in the frag_list. else if (st->root_skb == st->cur_skb && skb_shinfo(st->root_skb)->frag_list) { st->cur_skb = skb_shinfo(st->root_skb)->frag_list; goto next_skb; } Reversing the two conditions the attached patch fixes the issue for me on top of Herbert's patches. Signed-off-by: Shyam Iyer Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/core/skbuff.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index f23fd43539ed..da74b844f4ea 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -2250,13 +2250,13 @@ next_skb: st->frag_data = NULL; } - if (st->cur_skb->next) { - st->cur_skb = st->cur_skb->next; + if (st->root_skb == st->cur_skb && + skb_shinfo(st->root_skb)->frag_list) { + st->cur_skb = skb_shinfo(st->root_skb)->frag_list; st->frag_idx = 0; goto next_skb; - } else if (st->root_skb == st->cur_skb && - skb_shinfo(st->root_skb)->frag_list) { - st->cur_skb = skb_shinfo(st->root_skb)->frag_list; + } else if (st->cur_skb->next) { + st->cur_skb = st->cur_skb->next; st->frag_idx = 0; goto next_skb; } -- cgit v1.2.1 From 58092d1e0a896eb1d9163d58f93df7ed704fa8e1 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 29 Jan 2009 16:16:31 -0800 Subject: net: update documentation ip aliases This documentation is old. Add a short note to describe why aliases are no long necessary, and remove the old contact/edit info. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- Documentation/networking/alias.txt | 25 ++++++------------------- 1 file changed, 6 insertions(+), 19 deletions(-) diff --git a/Documentation/networking/alias.txt b/Documentation/networking/alias.txt index cd12c2ff518a..85046f53fcfc 100644 --- a/Documentation/networking/alias.txt +++ b/Documentation/networking/alias.txt @@ -2,13 +2,13 @@ IP-Aliasing: ============ -IP-aliases are additional IP-addresses/masks hooked up to a base -interface by adding a colon and a string when running ifconfig. -This string is usually numeric, but this is not a must. - -IP-Aliases are avail if CONFIG_INET (`standard' IPv4 networking) -is configured in the kernel. +IP-aliases are an obsolete way to manage multiple IP-addresses/masks +per interface. Newer tools such as iproute2 support multiple +address/prefixes per interface, but aliases are still supported +for backwards compatibility. +An alias is formed by adding a colon and a string when running ifconfig. +This string is usually numeric, but this is not a must. o Alias creation. Alias creation is done by 'magic' interface naming: eg. to create a @@ -38,16 +38,3 @@ o Relationship with main device If the base device is shut down the added aliases will be deleted too. - - -Contact -------- -Please finger or e-mail me: - Juan Jose Ciarlante - -Updated by Erik Schoenfelder - -; local variables: -; mode: indented-text -; mode: auto-fill -; end: -- cgit v1.2.1 From 9d8dba6c979fa99c96938c869611b9a23b73efa9 Mon Sep 17 00:00:00 2001 From: Benjamin Zores Date: Thu, 29 Jan 2009 16:19:13 -0800 Subject: ipv4: fix infinite retry loop in IP-Config Signed-off-by: Benjamin Zores Signed-off-by: David S. Miller --- net/ipv4/ipconfig.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c index 42a0f3dd3fd6..d722013c1cae 100644 --- a/net/ipv4/ipconfig.c +++ b/net/ipv4/ipconfig.c @@ -1268,6 +1268,9 @@ __be32 __init root_nfs_parse_addr(char *name) static int __init ip_auto_config(void) { __be32 addr; +#ifdef IPCONFIG_DYNAMIC + int retries = CONF_OPEN_RETRIES; +#endif #ifdef CONFIG_PROC_FS proc_net_fops_create(&init_net, "pnp", S_IRUGO, &pnp_seq_fops); @@ -1304,9 +1307,6 @@ static int __init ip_auto_config(void) #endif ic_first_dev->next) { #ifdef IPCONFIG_DYNAMIC - - int retries = CONF_OPEN_RETRIES; - if (ic_dynamic() < 0) { ic_close_devs(); -- cgit v1.2.1 From df1c46b2b6876d0a1b1b4740f009fa69d95ebbc9 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 29 Jan 2009 16:53:35 -0800 Subject: tun: Add some missing TUN compat ioctl translations. Based upon a report from Michael Tokarev : Just saw in dmesg: ioctl32(kvm:4408): Unknown cmd fd(9) cmd(800454cf){t:'T';sz:4} arg(ffc668e4) on /dev/net/tun Signed-off-by: David S. Miller --- fs/compat_ioctl.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index 5235c67e7594..c8f8d5904f5e 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -538,6 +538,7 @@ static int dev_ifsioc(unsigned int fd, unsigned int cmd, unsigned long arg) * cannot be fixed without breaking all existing apps. */ case TUNSETIFF: + case TUNGETIFF: case SIOCGIFFLAGS: case SIOCGIFMETRIC: case SIOCGIFMTU: @@ -1982,6 +1983,11 @@ COMPATIBLE_IOCTL(TUNSETNOCSUM) COMPATIBLE_IOCTL(TUNSETDEBUG) COMPATIBLE_IOCTL(TUNSETPERSIST) COMPATIBLE_IOCTL(TUNSETOWNER) +COMPATIBLE_IOCTL(TUNSETLINK) +COMPATIBLE_IOCTL(TUNSETGROUP) +COMPATIBLE_IOCTL(TUNGETFEATURES) +COMPATIBLE_IOCTL(TUNSETOFFLOAD) +COMPATIBLE_IOCTL(TUNSETTXFILTER) /* Big V */ COMPATIBLE_IOCTL(VT_SETMODE) COMPATIBLE_IOCTL(VT_GETMODE) @@ -2573,6 +2579,7 @@ HANDLE_IOCTL(SIOCGIFPFLAGS, dev_ifsioc) HANDLE_IOCTL(SIOCGIFTXQLEN, dev_ifsioc) HANDLE_IOCTL(SIOCSIFTXQLEN, dev_ifsioc) HANDLE_IOCTL(TUNSETIFF, dev_ifsioc) +HANDLE_IOCTL(TUNGETIFF, dev_ifsioc) HANDLE_IOCTL(SIOCETHTOOL, ethtool_ioctl) HANDLE_IOCTL(SIOCBONDENSLAVE, bond_ioctl) HANDLE_IOCTL(SIOCBONDRELEASE, bond_ioctl) -- cgit v1.2.1 From 584dbe9475313e117abf9d2af88164edfd429c9a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Daniel=20Marjam=C3=A4ki?= Date: Thu, 29 Jan 2009 08:55:56 +0000 Subject: netxen: fix memory leak in drivers/net/netxen_nic_init.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit For kernel bugzilla #12537: http://bugzilla.kernel.org/show_bug.cgi?id=12537 Free memory. Signed-off-by: Daniel Marjamäki Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_init.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index ca7c8d8050c9..ffd37bea1628 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -947,8 +947,10 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose) } for (i = 0; i < n; i++) { if (netxen_rom_fast_read(adapter, 8*i + 4*offset, &val) != 0 || - netxen_rom_fast_read(adapter, 8*i + 4*offset + 4, &addr) != 0) + netxen_rom_fast_read(adapter, 8*i + 4*offset + 4, &addr) != 0) { + kfree(buf); return -EIO; + } buf[i].addr = addr; buf[i].data = val; -- cgit v1.2.1 From 72410af921cbc9018da388ca1ddf75880a033ac1 Mon Sep 17 00:00:00 2001 From: Atsushi SAKAI Date: Fri, 16 Jan 2009 20:39:14 +0900 Subject: lguest: typos fix 3 points lguest_asm.S => i386_head.S LHCALL_BREAK => LHREQ_BREAK perferred => preferred Signed-off-by: Atsushi SAKAI Signed-off-by: Rusty Russell --- arch/x86/lguest/boot.c | 4 ++-- drivers/lguest/core.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index a7ed208f81e3..92f1c6f3e19d 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -931,7 +931,7 @@ static void lguest_restart(char *reason) * that we can fit comfortably. * * First we need assembly templates of each of the patchable Guest operations, - * and these are in lguest_asm.S. */ + * and these are in i386_head.S. */ /*G:060 We construct a table from the assembler templates: */ static const struct lguest_insns @@ -1093,7 +1093,7 @@ __init void lguest_init(void) acpi_ht = 0; #endif - /* We set the perferred console to "hvc". This is the "hypervisor + /* We set the preferred console to "hvc". This is the "hypervisor * virtual console" driver written by the PowerPC people, which we also * adapted for lguest's use. */ add_preferred_console("hvc", 0, NULL); diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c index 90663e01a56e..60156dfdc608 100644 --- a/drivers/lguest/core.c +++ b/drivers/lguest/core.c @@ -224,7 +224,7 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user) break; /* If the Guest asked to be stopped, we sleep. The Guest's - * clock timer or LHCALL_BREAK from the Waker will wake us. */ + * clock timer or LHREQ_BREAK from the Waker will wake us. */ if (cpu->halted) { set_current_state(TASK_INTERRUPTIBLE); schedule(); -- cgit v1.2.1 From b44d49ab0954accefba4c71274ab58abe1c25c52 Mon Sep 17 00:00:00 2001 From: Tim 'mithro' Ansell Date: Thu, 22 Jan 2009 15:06:41 +1100 Subject: lguest: disable the FORTIFY for lguest. Makes all the warnings go away when compiling lguest on Ubuntu on Intrepid or greater. Signed-off-by: Timothy R Ansell Signed-off-by: Rusty Russell --- Documentation/lguest/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/lguest/Makefile b/Documentation/lguest/Makefile index 725eef81cd48..1f4f9e888bd1 100644 --- a/Documentation/lguest/Makefile +++ b/Documentation/lguest/Makefile @@ -1,5 +1,5 @@ # This creates the demonstration utility "lguest" which runs a Linux guest. -CFLAGS:=-Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include -I../../arch/x86/include +CFLAGS:=-Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include -I../../arch/x86/include -U_FORTIFY_SOURCE LDLIBS:=-lz all: lguest -- cgit v1.2.1 From 05dfdbbd678ea2b642db73f48b75667a23d15484 Mon Sep 17 00:00:00 2001 From: Mark Wallis Date: Mon, 26 Jan 2009 17:32:35 +1100 Subject: lguest: Fix a memory leak with the lg object during launcher close Fix a memory leak identified by Rusty Russell during LCA09 by kfree'ing the lg object instead of just clearing it when the launcher closes. Signed-off-by: Mark Wallis Signed-off-by: Rusty Russell --- drivers/lguest/lguest_user.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c index 34bc017b8b3c..b8ee103eed5f 100644 --- a/drivers/lguest/lguest_user.c +++ b/drivers/lguest/lguest_user.c @@ -307,9 +307,8 @@ static int close(struct inode *inode, struct file *file) * kmalloc()ed string, either of which is ok to hand to kfree(). */ if (!IS_ERR(lg->dead)) kfree(lg->dead); - /* We clear the entire structure, which also marks it as free for the - * next user. */ - memset(lg, 0, sizeof(*lg)); + /* Free the memory allocated to the lguest_struct */ + kfree(lg); /* Release lock and exit. */ mutex_unlock(&lguest_lock); -- cgit v1.2.1 From 1af7ad51049d6a310a19d497960597198290ddfa Mon Sep 17 00:00:00 2001 From: Inaky Perez-Gonzalez Date: Thu, 29 Jan 2009 17:18:31 -0800 Subject: wimax: fix build issue when debugfs is disabled MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As reported by Toralf Förster and Randy Dunlap. - http://linuxwimax.org/pipermail/wimax/2009-January/000460.html - http://lkml.org/lkml/2009/1/29/279 The definitions needed for the wimax stack and i2400m driver debug infrastructure was, by mistake, compiled depending on CONFIG_DEBUG_FS (by them being placed in the debugfs.c files); thus the build broke in 2.6.29-rc3 when debugging was enabled (CONFIG_WIMAX_DEBUG) and DEBUG_FS was disabled. These definitions are always needed if debug is enabled at compile time (independently of DEBUG_FS being or not enabled), so moving them to a file that is always compiled fixes the issue. Signed-off-by: Inaky Perez-Gonzalez Signed-off-by: David S. Miller --- drivers/net/wimax/i2400m/debugfs.c | 14 -------------- drivers/net/wimax/i2400m/driver.c | 16 ++++++++++++++++ net/wimax/debugfs.c | 11 ----------- net/wimax/stack.c | 13 +++++++++++++ 4 files changed, 29 insertions(+), 25 deletions(-) diff --git a/drivers/net/wimax/i2400m/debugfs.c b/drivers/net/wimax/i2400m/debugfs.c index 626632985977..9b81af3f80a9 100644 --- a/drivers/net/wimax/i2400m/debugfs.c +++ b/drivers/net/wimax/i2400m/debugfs.c @@ -234,20 +234,6 @@ struct dentry *debugfs_create_i2400m_reset( &fops_i2400m_reset); } -/* - * Debug levels control; see debug.h - */ -struct d_level D_LEVEL[] = { - D_SUBMODULE_DEFINE(control), - D_SUBMODULE_DEFINE(driver), - D_SUBMODULE_DEFINE(debugfs), - D_SUBMODULE_DEFINE(fw), - D_SUBMODULE_DEFINE(netdev), - D_SUBMODULE_DEFINE(rfkill), - D_SUBMODULE_DEFINE(rx), - D_SUBMODULE_DEFINE(tx), -}; -size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL); #define __debugfs_register(prefix, name, parent) \ do { \ diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c index 5f98047e18cf..e80a0b65a754 100644 --- a/drivers/net/wimax/i2400m/driver.c +++ b/drivers/net/wimax/i2400m/driver.c @@ -707,6 +707,22 @@ void i2400m_release(struct i2400m *i2400m) EXPORT_SYMBOL_GPL(i2400m_release); +/* + * Debug levels control; see debug.h + */ +struct d_level D_LEVEL[] = { + D_SUBMODULE_DEFINE(control), + D_SUBMODULE_DEFINE(driver), + D_SUBMODULE_DEFINE(debugfs), + D_SUBMODULE_DEFINE(fw), + D_SUBMODULE_DEFINE(netdev), + D_SUBMODULE_DEFINE(rfkill), + D_SUBMODULE_DEFINE(rx), + D_SUBMODULE_DEFINE(tx), +}; +size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL); + + static int __init i2400m_driver_init(void) { diff --git a/net/wimax/debugfs.c b/net/wimax/debugfs.c index 87cf4430079c..94d216a46407 100644 --- a/net/wimax/debugfs.c +++ b/net/wimax/debugfs.c @@ -28,17 +28,6 @@ #include "debug-levels.h" -/* Debug framework control of debug levels */ -struct d_level D_LEVEL[] = { - D_SUBMODULE_DEFINE(debugfs), - D_SUBMODULE_DEFINE(id_table), - D_SUBMODULE_DEFINE(op_msg), - D_SUBMODULE_DEFINE(op_reset), - D_SUBMODULE_DEFINE(op_rfkill), - D_SUBMODULE_DEFINE(stack), -}; -size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL); - #define __debugfs_register(prefix, name, parent) \ do { \ result = d_level_register_debugfs(prefix, name, parent); \ diff --git a/net/wimax/stack.c b/net/wimax/stack.c index d4da92f8981a..3869c0327882 100644 --- a/net/wimax/stack.c +++ b/net/wimax/stack.c @@ -516,6 +516,19 @@ void wimax_dev_rm(struct wimax_dev *wimax_dev) } EXPORT_SYMBOL_GPL(wimax_dev_rm); + +/* Debug framework control of debug levels */ +struct d_level D_LEVEL[] = { + D_SUBMODULE_DEFINE(debugfs), + D_SUBMODULE_DEFINE(id_table), + D_SUBMODULE_DEFINE(op_msg), + D_SUBMODULE_DEFINE(op_reset), + D_SUBMODULE_DEFINE(op_rfkill), + D_SUBMODULE_DEFINE(stack), +}; +size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL); + + struct genl_family wimax_gnl_family = { .id = GENL_ID_GENERATE, .name = "WiMAX", -- cgit v1.2.1 From b1c4a9dddf09fe99b8f88252718ac5b357363dc4 Mon Sep 17 00:00:00 2001 From: Haiying Wang Date: Thu, 29 Jan 2009 17:28:04 -0800 Subject: ucc_geth: Change uec phy id to the same format as gianfar's The commit b31a1d8b41513b96e9c7ec2f68c5734cef0b26a4 ("gianfar: Convert gianfar to an of_platform_driver") changes the gianfar's phy id to the format like "mdio@xxxx:xx", but uec still uses the old format like "xxxxxxxx:xx". For the board whose UEC uses gianfar-mdio like MPC8568MDS, the phy can not be attached because of the incompatible phy id format. This patch changes uec's phy id to the same format as gianfar's. Signed-off-by: Haiying Wang Signed-off-by: David S. Miller --- drivers/net/ucc_geth.c | 20 ++++++++++++++++++-- drivers/net/ucc_geth.h | 2 ++ drivers/net/ucc_geth_mii.c | 12 +++++++++++- drivers/net/ucc_geth_mii.h | 1 + 4 files changed, 32 insertions(+), 3 deletions(-) diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index 11441225bf41..e87986867ba5 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -1536,6 +1536,11 @@ static void adjust_link(struct net_device *dev) static int init_phy(struct net_device *dev) { struct ucc_geth_private *priv = netdev_priv(dev); + struct device_node *np = priv->node; + struct device_node *phy, *mdio; + const phandle *ph; + char bus_name[MII_BUS_ID_SIZE]; + const unsigned int *id; struct phy_device *phydev; char phy_id[BUS_ID_SIZE]; @@ -1543,8 +1548,18 @@ static int init_phy(struct net_device *dev) priv->oldspeed = 0; priv->oldduplex = -1; - snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, priv->ug_info->mdio_bus, - priv->ug_info->phy_address); + ph = of_get_property(np, "phy-handle", NULL); + phy = of_find_node_by_phandle(*ph); + mdio = of_get_parent(phy); + + id = of_get_property(phy, "reg", NULL); + + of_node_put(phy); + of_node_put(mdio); + + uec_mdio_bus_name(bus_name, mdio); + snprintf(phy_id, sizeof(phy_id), "%s:%02x", + bus_name, *id); phydev = phy_connect(dev, phy_id, &adjust_link, 0, priv->phy_interface); @@ -3748,6 +3763,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma ugeth->ug_info = ug_info; ugeth->dev = dev; + ugeth->node = np; return 0; } diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h index 8f699cb773ee..16cbe42ba43c 100644 --- a/drivers/net/ucc_geth.h +++ b/drivers/net/ucc_geth.h @@ -1186,6 +1186,8 @@ struct ucc_geth_private { int oldspeed; int oldduplex; int oldlink; + + struct device_node *node; }; void uec_set_ethtool_ops(struct net_device *netdev); diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c index c001d261366b..54635911305c 100644 --- a/drivers/net/ucc_geth_mii.c +++ b/drivers/net/ucc_geth_mii.c @@ -156,7 +156,7 @@ static int uec_mdio_probe(struct of_device *ofdev, const struct of_device_id *ma if (err) goto reg_map_fail; - snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", res.start); + uec_mdio_bus_name(new_bus->id, np); new_bus->irq = kmalloc(32 * sizeof(int), GFP_KERNEL); @@ -283,3 +283,13 @@ void uec_mdio_exit(void) { of_unregister_platform_driver(&uec_mdio_driver); } + +void uec_mdio_bus_name(char *name, struct device_node *np) +{ + const u32 *reg; + + reg = of_get_property(np, "reg", NULL); + + snprintf(name, MII_BUS_ID_SIZE, "%s@%x", np->name, reg ? *reg : 0); +} + diff --git a/drivers/net/ucc_geth_mii.h b/drivers/net/ucc_geth_mii.h index 1e45b2028a50..840cf80235b7 100644 --- a/drivers/net/ucc_geth_mii.h +++ b/drivers/net/ucc_geth_mii.h @@ -97,4 +97,5 @@ int uec_mdio_read(struct mii_bus *bus, int mii_id, int regnum); int uec_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value); int __init uec_mdio_init(void); void uec_mdio_exit(void); +void uec_mdio_bus_name(char *name, struct device_node *np); #endif /* __UEC_MII_H */ -- cgit v1.2.1 From 1609559547ae0ddc2e4829c7f78ac2c4869875b9 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Thu, 29 Jan 2009 17:29:15 -0800 Subject: smsc9420: fix interrupt signalling test failures smsc9420 performs an interrupt signalling test when the interface is brought up. The current code mistakenly sets its test flag to false AFTER enabling the software interrupt source, making failure quite likely. This patch changes the code to set the test flag BEFORE enabling interrupts. I've also removed an smp_wmb because the following spinlock provides an implicit memory barrier. Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/smsc9420.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c index c14a4c6452c7..d801900a5036 100644 --- a/drivers/net/smsc9420.c +++ b/drivers/net/smsc9420.c @@ -1378,6 +1378,7 @@ static int smsc9420_open(struct net_device *dev) /* test the IRQ connection to the ISR */ smsc_dbg(IFUP, "Testing ISR using IRQ %d", dev->irq); + pd->software_irq_signal = false; spin_lock_irqsave(&pd->int_lock, flags); /* configure interrupt deassertion timer and enable interrupts */ @@ -1393,8 +1394,6 @@ static int smsc9420_open(struct net_device *dev) smsc9420_pci_flush_write(pd); timeout = 1000; - pd->software_irq_signal = false; - smp_wmb(); while (timeout--) { if (pd->software_irq_signal) break; -- cgit v1.2.1 From f307dbd88d82c4ccab7aec49613c366023b89cde Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 29 Jan 2009 17:30:00 -0800 Subject: smsc911x: timeout reaches -1 With a postfix decrement the timeout will reach -1 rather than 0, so the warning will not be issued. Signed-off-by: Roel Kluin Acked-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/smsc911x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index f513bdf1c887..783c1a7b869e 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -953,7 +953,7 @@ smsc911x_rx_fastforward(struct smsc911x_data *pdata, unsigned int pktbytes) do { udelay(1); val = smsc911x_reg_read(pdata, RX_DP_CTRL); - } while (timeout-- && (val & RX_DP_CTRL_RX_FFWD_)); + } while (--timeout && (val & RX_DP_CTRL_RX_FFWD_)); if (unlikely(timeout == 0)) SMSC_WARNING(HW, "Timed out waiting for " -- cgit v1.2.1 From e5664bb2a7fd8ae1bee1281c2e44653c471af9ca Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 29 Jan 2009 17:31:13 -0800 Subject: gianfar: Fix Wake-on-LAN support commit 0f0ca340e57bd7446855fefd07a64249acf81223 ("phy: power management support") caused a regression in the gianfar driver. Now phylib turns off PHY power during suspend, and thus WOL doesn't work anymore. This patch workarounds the issue by enabling wakeup in the MDIO device, i.e. just restores the old behaviour for the gianfar driver. Note that this way all PHYs on a given MDIO bus won't be turned off during suspend, which isn't good from the power saving point of view. A proper, per netdevice wakeup management support will need a bit reworked phylib suspend/resume logic. Signed-off-by: Anton Vorontsov Signed-off-by: David S. Miller --- drivers/net/gianfar_mii.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c index f3706e415b45..f49a426ad681 100644 --- a/drivers/net/gianfar_mii.c +++ b/drivers/net/gianfar_mii.c @@ -234,6 +234,8 @@ static int gfar_mdio_probe(struct of_device *ofdev, if (NULL == new_bus) return -ENOMEM; + device_init_wakeup(&ofdev->dev, 1); + new_bus->name = "Gianfar MII Bus", new_bus->read = &gfar_mdio_read, new_bus->write = &gfar_mdio_write, -- cgit v1.2.1 From c25b9abbc2c2c0da88e180c3933d6e773245815a Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 29 Jan 2009 17:32:20 -0800 Subject: drivers/net/skfp: if !capable(CAP_NET_ADMIN): inverted logic Fix inverted logic Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- drivers/net/skfp/skfddi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c index 607efeaf0bc5..9a00e5566af7 100644 --- a/drivers/net/skfp/skfddi.c +++ b/drivers/net/skfp/skfddi.c @@ -1003,9 +1003,9 @@ static int skfp_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) break; case SKFP_CLR_STATS: /* Zero out the driver statistics */ if (!capable(CAP_NET_ADMIN)) { - memset(&lp->MacStat, 0, sizeof(lp->MacStat)); - } else { status = -EPERM; + } else { + memset(&lp->MacStat, 0, sizeof(lp->MacStat)); } break; default: -- cgit v1.2.1 From f99ec0649accb581cf3e8fcfeea796e82d05f4ea Mon Sep 17 00:00:00 2001 From: Philippe De Muyter Date: Thu, 29 Jan 2009 17:35:04 -0800 Subject: tulip: fix 21142 with 10Mbps without negotiation with current kernels, tulip 21142 ethernet controllers fail to connect to a 10Mbps only (i.e. without negotiation-partner) network. It used to work in 2.4 kernels. Fix that. Tested on a 21142 Rev 0x11. Signed-off-by: Philippe De Muyter Signed-off-by: David S. Miller --- drivers/net/tulip/21142.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) diff --git a/drivers/net/tulip/21142.c b/drivers/net/tulip/21142.c index 1210fb3748a7..db7d5e11855d 100644 --- a/drivers/net/tulip/21142.c +++ b/drivers/net/tulip/21142.c @@ -9,6 +9,11 @@ Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} for more information on this driver. + + DC21143 manual "21143 PCI/CardBus 10/100Mb/s Ethernet LAN Controller + Hardware Reference Manual" is currently available at : + http://developer.intel.com/design/network/manuals/278074.htm + Please submit bugs to http://bugzilla.kernel.org/ . */ @@ -32,7 +37,11 @@ void t21142_media_task(struct work_struct *work) int csr12 = ioread32(ioaddr + CSR12); int next_tick = 60*HZ; int new_csr6 = 0; + int csr14 = ioread32(ioaddr + CSR14); + /* CSR12[LS10,LS100] are not reliable during autonegotiation */ + if ((csr14 & 0x80) && (csr12 & 0x7000) != 0x5000) + csr12 |= 6; if (tulip_debug > 2) printk(KERN_INFO"%s: 21143 negotiation status %8.8x, %s.\n", dev->name, csr12, medianame[dev->if_port]); @@ -76,7 +85,7 @@ void t21142_media_task(struct work_struct *work) new_csr6 = 0x83860000; dev->if_port = 3; iowrite32(0, ioaddr + CSR13); - iowrite32(0x0003FF7F, ioaddr + CSR14); + iowrite32(0x0003FFFF, ioaddr + CSR14); iowrite16(8, ioaddr + CSR15); iowrite32(1, ioaddr + CSR13); } @@ -132,10 +141,14 @@ void t21142_lnk_change(struct net_device *dev, int csr5) struct tulip_private *tp = netdev_priv(dev); void __iomem *ioaddr = tp->base_addr; int csr12 = ioread32(ioaddr + CSR12); + int csr14 = ioread32(ioaddr + CSR14); + /* CSR12[LS10,LS100] are not reliable during autonegotiation */ + if ((csr14 & 0x80) && (csr12 & 0x7000) != 0x5000) + csr12 |= 6; if (tulip_debug > 1) printk(KERN_INFO"%s: 21143 link status interrupt %8.8x, CSR5 %x, " - "%8.8x.\n", dev->name, csr12, csr5, ioread32(ioaddr + CSR14)); + "%8.8x.\n", dev->name, csr12, csr5, csr14); /* If NWay finished and we have a negotiated partner capability. */ if (tp->nway && !tp->nwayset && (csr12 & 0x7000) == 0x5000) { @@ -143,7 +156,9 @@ void t21142_lnk_change(struct net_device *dev, int csr5) int negotiated = tp->sym_advertise & (csr12 >> 16); tp->lpar = csr12 >> 16; tp->nwayset = 1; - if (negotiated & 0x0100) dev->if_port = 5; + /* If partner cannot negotiate, it is 10Mbps Half Duplex */ + if (!(csr12 & 0x8000)) dev->if_port = 0; + else if (negotiated & 0x0100) dev->if_port = 5; else if (negotiated & 0x0080) dev->if_port = 3; else if (negotiated & 0x0040) dev->if_port = 4; else if (negotiated & 0x0020) dev->if_port = 0; @@ -214,7 +229,7 @@ void t21142_lnk_change(struct net_device *dev, int csr5) tp->timer.expires = RUN_AT(3*HZ); add_timer(&tp->timer); } else if (dev->if_port == 5) - iowrite32(ioread32(ioaddr + CSR14) & ~0x080, ioaddr + CSR14); + iowrite32(csr14 & ~0x080, ioaddr + CSR14); } else if (dev->if_port == 0 || dev->if_port == 4) { if ((csr12 & 4) == 0) printk(KERN_INFO"%s: 21143 10baseT link beat good.\n", -- cgit v1.2.1 From de33c8db5910cda599899dd431cc30d7c1018cbf Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 29 Jan 2009 17:46:42 -0800 Subject: Fix OOPS in mmap_region() when merging adjacent VM_LOCKED file segments As of commit ba470de43188cdbff795b5da43a1474523c6c2fb ("map: handle mlocked pages during map, remap, unmap") we now use the 'vma' variable at the end of mmap_region() to handle the page-in of newly mapped mlocked pages. However, if we merged adjacent vma's together, the vma we're using may be stale. We historically consciously avoided using it after the merge operation, but that got overlooked when redoing the locked page handling. This commit simplifies mmap_region() by doing any vma merges early, avoiding the issue entirely, and 'vma' will always be valid. As pointed out by Hugh Dickins, this depends on any drivers that change the page offset of flags to have set one of the VM_SPECIAL bits (so that they cannot trigger the early merge logic), but that's true in general. Reported-and-tested-by: Maksim Yevmenkin Cc: Lee Schermerhorn Cc: Nick Piggin Cc: Andrew Morton Cc: Hugh Dickins Signed-off-by: Linus Torvalds --- mm/mmap.c | 26 ++++++-------------------- 1 file changed, 6 insertions(+), 20 deletions(-) diff --git a/mm/mmap.c b/mm/mmap.c index 8d95902e9a38..d3fa10a726cf 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -1134,16 +1134,11 @@ munmap_back: } /* - * Can we just expand an old private anonymous mapping? - * The VM_SHARED test is necessary because shmem_zero_setup - * will create the file object for a shared anonymous map below. + * Can we just expand an old mapping? */ - if (!file && !(vm_flags & VM_SHARED)) { - vma = vma_merge(mm, prev, addr, addr + len, vm_flags, - NULL, NULL, pgoff, NULL); - if (vma) - goto out; - } + vma = vma_merge(mm, prev, addr, addr + len, vm_flags, NULL, file, pgoff, NULL); + if (vma) + goto out; /* * Determine the object being mapped and call the appropriate @@ -1206,17 +1201,8 @@ munmap_back: if (vma_wants_writenotify(vma)) vma->vm_page_prot = vm_get_page_prot(vm_flags & ~VM_SHARED); - if (file && vma_merge(mm, prev, addr, vma->vm_end, - vma->vm_flags, NULL, file, pgoff, vma_policy(vma))) { - mpol_put(vma_policy(vma)); - kmem_cache_free(vm_area_cachep, vma); - fput(file); - if (vm_flags & VM_EXECUTABLE) - removed_exe_file_vma(mm); - } else { - vma_link(mm, vma, prev, rb_link, rb_parent); - file = vma->vm_file; - } + vma_link(mm, vma, prev, rb_link, rb_parent); + file = vma->vm_file; /* Once vma denies write, undo our temporary denial count */ if (correct_wcount) -- cgit v1.2.1 From 69b3bb65fa97a1e8563518dbbc35cd57beefb2d4 Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Thu, 29 Jan 2009 14:25:06 -0800 Subject: sgi-xpc: ensure flags are updated before bte_copy The clearing of the msg->flags needs a barrier between it and the notify of the channel threads that the messages are cleaned and ready for use. Signed-off-by: Robin Holt Signed-off-by: Dean Nelson Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xpc_sn2.c | 9 +++++---- drivers/misc/sgi-xp/xpc_uv.c | 2 +- 2 files changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index 82fb9958f22f..7aafb8a91945 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -1836,6 +1836,7 @@ xpc_process_msg_chctl_flags_sn2(struct xpc_partition *part, int ch_number) */ xpc_clear_remote_msgqueue_flags_sn2(ch); + smp_wmb(); /* ensure flags have been cleared before bte_copy */ ch_sn2->w_remote_GP.put = ch_sn2->remote_GP.put; dev_dbg(xpc_chan, "w_remote_GP.put changed to %ld, partid=%d, " @@ -1934,7 +1935,7 @@ xpc_get_deliverable_payload_sn2(struct xpc_channel *ch) break; get = ch_sn2->w_local_GP.get; - rmb(); /* guarantee that .get loads before .put */ + smp_rmb(); /* guarantee that .get loads before .put */ if (get == ch_sn2->w_remote_GP.put) break; @@ -2053,7 +2054,7 @@ xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags, while (1) { put = ch_sn2->w_local_GP.put; - rmb(); /* guarantee that .put loads before .get */ + smp_rmb(); /* guarantee that .put loads before .get */ if (put - ch_sn2->w_remote_GP.get < ch->local_nentries) { /* There are available message entries. We need to try @@ -2186,7 +2187,7 @@ xpc_send_payload_sn2(struct xpc_channel *ch, u32 flags, void *payload, * The preceding store of msg->flags must occur before the following * load of local_GP->put. */ - mb(); + smp_mb(); /* see if the message is next in line to be sent, if so send it */ @@ -2287,7 +2288,7 @@ xpc_received_payload_sn2(struct xpc_channel *ch, void *payload) * The preceding store of msg->flags must occur before the following * load of local_GP->get. */ - mb(); + smp_mb(); /* * See if this message is next in line to be acknowledged as having diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c index 91a55b1b1037..f17f7d40ea2c 100644 --- a/drivers/misc/sgi-xp/xpc_uv.c +++ b/drivers/misc/sgi-xp/xpc_uv.c @@ -1423,7 +1423,7 @@ xpc_send_payload_uv(struct xpc_channel *ch, u32 flags, void *payload, atomic_inc(&ch->n_to_notify); msg_slot->key = key; - wmb(); /* a non-NULL func must hit memory after the key */ + smp_wmb(); /* a non-NULL func must hit memory after the key */ msg_slot->func = func; if (ch->flags & XPC_C_DISCONNECTING) { -- cgit v1.2.1 From 17e2161654da4e6bdfd8d53d4f52e820ee93f423 Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Thu, 29 Jan 2009 14:25:07 -0800 Subject: sgi-xpc: Remove NULL pointer dereference. If the bte copy fails, the attempt to retrieve payloads merely returns a null pointer deref and not NULL as was expected. Signed-off-by: Robin Holt Signed-off-by: Dean Nelson Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xpc_sn2.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index 7aafb8a91945..7d05fb5f4fee 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -1957,11 +1957,13 @@ xpc_get_deliverable_payload_sn2(struct xpc_channel *ch) msg = xpc_pull_remote_msg_sn2(ch, get); - DBUG_ON(msg != NULL && msg->number != get); - DBUG_ON(msg != NULL && (msg->flags & XPC_M_SN2_DONE)); - DBUG_ON(msg != NULL && !(msg->flags & XPC_M_SN2_READY)); + if (msg != NULL) { + DBUG_ON(msg->number != get); + DBUG_ON(msg->flags & XPC_M_SN2_DONE); + DBUG_ON(!(msg->flags & XPC_M_SN2_READY)); - payload = &msg->payload; + payload = &msg->payload; + } break; } -- cgit v1.2.1 From 252523ef2421b803de4810876223e4d695f23ec6 Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Thu, 29 Jan 2009 14:25:07 -0800 Subject: sgi-xpc: fix up stale DBUG_ON statements Clean up the stale DBUG_ON checks and add a couple new ones. Signed-off-by: Robin Holt Signed-off-by: Dean Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xpc_channel.c | 3 --- drivers/misc/sgi-xp/xpc_sn2.c | 15 +++++++++++---- 2 files changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c index 9cd2ebe2a3b6..45fd653dbe31 100644 --- a/drivers/misc/sgi-xp/xpc_channel.c +++ b/drivers/misc/sgi-xp/xpc_channel.c @@ -49,9 +49,6 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags) if (ch->flags & (XPC_C_CONNECTED | XPC_C_DISCONNECTING)) return; - - DBUG_ON(ch->local_msgqueue == NULL); - DBUG_ON(ch->remote_msgqueue == NULL); } if (!(ch->flags & XPC_C_OPENREPLY)) { diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index 7d05fb5f4fee..2e975762c32b 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -1106,8 +1106,6 @@ xpc_process_activate_IRQ_rcvd_sn2(void) int n_IRQs_expected; int n_IRQs_detected; - DBUG_ON(xpc_activate_IRQ_rcvd == 0); - spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags); n_IRQs_expected = xpc_activate_IRQ_rcvd; xpc_activate_IRQ_rcvd = 0; @@ -1726,6 +1724,7 @@ xpc_clear_local_msgqueue_flags_sn2(struct xpc_channel *ch) msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->local_msgqueue + (get % ch->local_nentries) * ch->entry_size); + DBUG_ON(!(msg->flags & XPC_M_SN2_READY)); msg->flags = 0; } while (++get < ch_sn2->remote_GP.get); } @@ -1740,11 +1739,18 @@ xpc_clear_remote_msgqueue_flags_sn2(struct xpc_channel *ch) struct xpc_msg_sn2 *msg; s64 put; - put = ch_sn2->w_remote_GP.put; + /* flags are zeroed when the buffer is allocated */ + if (ch_sn2->remote_GP.put < ch->remote_nentries) + return; + + put = max(ch_sn2->w_remote_GP.put, ch->remote_nentries); do { msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue + (put % ch->remote_nentries) * ch->entry_size); + DBUG_ON(!(msg->flags & XPC_M_SN2_READY)); + DBUG_ON(!(msg->flags & XPC_M_SN2_DONE)); + DBUG_ON(msg->number != put - ch->remote_nentries); msg->flags = 0; } while (++put < ch_sn2->remote_GP.put); } @@ -2280,8 +2286,9 @@ xpc_received_payload_sn2(struct xpc_channel *ch, void *payload) dev_dbg(xpc_chan, "msg=0x%p, msg_number=%ld, partid=%d, channel=%d\n", (void *)msg, msg_number, ch->partid, ch->number); - DBUG_ON((((u64)msg - (u64)ch->remote_msgqueue) / ch->entry_size) != + DBUG_ON((((u64)msg - (u64)ch->sn.sn2.remote_msgqueue) / ch->entry_size) != msg_number % ch->remote_nentries); + DBUG_ON(!(msg->flags & XPC_M_SN2_READY)); DBUG_ON(msg->flags & XPC_M_SN2_DONE); msg->flags |= XPC_M_SN2_DONE; -- cgit v1.2.1 From dc19835df6c47ff676ad6c98722d5e529db5d74c Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Thu, 29 Jan 2009 14:25:08 -0800 Subject: kprobes: fix module compilation error with CONFIG_KPROBES=n Define kprobes related data structures even if CONFIG_KPROBES is not set. This fixes compilation errors which occur if CONFIG_KPROBES is not set, in kprobe using modules. [akpm@linux-foundation.org: fix build for non-kprobes-supporting architectures] Reviewed-by: Ananth N Mavinakayanahalli Signed-off-by: Masami Hiramatsu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kprobes.h | 47 ++++++++++++++++++++++++++--------------------- 1 file changed, 26 insertions(+), 21 deletions(-) diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h index d6ea19e314bb..32851eef48f0 100644 --- a/include/linux/kprobes.h +++ b/include/linux/kprobes.h @@ -49,6 +49,13 @@ /* Attach to insert probes on any functions which should be ignored*/ #define __kprobes __attribute__((__section__(".kprobes.text"))) notrace +#else /* CONFIG_KPROBES */ +typedef int kprobe_opcode_t; +struct arch_specific_insn { + int dummy; +}; +#define __kprobes notrace +#endif /* CONFIG_KPROBES */ struct kprobe; struct pt_regs; @@ -131,23 +138,6 @@ struct jprobe { /* For backward compatibility with old code using JPROBE_ENTRY() */ #define JPROBE_ENTRY(handler) (handler) -DECLARE_PER_CPU(struct kprobe *, current_kprobe); -DECLARE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); - -#ifdef CONFIG_KRETPROBES -extern void arch_prepare_kretprobe(struct kretprobe_instance *ri, - struct pt_regs *regs); -extern int arch_trampoline_kprobe(struct kprobe *p); -#else /* CONFIG_KRETPROBES */ -static inline void arch_prepare_kretprobe(struct kretprobe *rp, - struct pt_regs *regs) -{ -} -static inline int arch_trampoline_kprobe(struct kprobe *p) -{ - return 0; -} -#endif /* CONFIG_KRETPROBES */ /* * Function-return probe - * Note: @@ -188,6 +178,25 @@ struct kprobe_blackpoint { unsigned long range; }; +#ifdef CONFIG_KPROBES +DECLARE_PER_CPU(struct kprobe *, current_kprobe); +DECLARE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); + +#ifdef CONFIG_KRETPROBES +extern void arch_prepare_kretprobe(struct kretprobe_instance *ri, + struct pt_regs *regs); +extern int arch_trampoline_kprobe(struct kprobe *p); +#else /* CONFIG_KRETPROBES */ +static inline void arch_prepare_kretprobe(struct kretprobe *rp, + struct pt_regs *regs) +{ +} +static inline int arch_trampoline_kprobe(struct kprobe *p) +{ + return 0; +} +#endif /* CONFIG_KRETPROBES */ + extern struct kretprobe_blackpoint kretprobe_blacklist[]; static inline void kretprobe_assert(struct kretprobe_instance *ri, @@ -264,10 +273,6 @@ void recycle_rp_inst(struct kretprobe_instance *ri, struct hlist_head *head); #else /* CONFIG_KPROBES */ -#define __kprobes notrace -struct jprobe; -struct kretprobe; - static inline struct kprobe *get_kprobe(void *addr) { return NULL; -- cgit v1.2.1 From 9e9e3cbc62da43c66e894d5a61fa08b427e25202 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Thu, 29 Jan 2009 14:25:09 -0800 Subject: mm: OOM documentation update Signed-off-by: Evgeniy Polyakov Acked-by: David Rientjes Cc: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/proc.txt | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index bbebc3a43ac0..a87be42f8211 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -2027,6 +2027,34 @@ increase the likelihood of this process being killed by the oom-killer. Valid values are in the range -16 to +15, plus the special value -17, which disables oom-killing altogether for this process. +The process to be killed in an out-of-memory situation is selected among all others +based on its badness score. This value equals the original memory size of the process +and is then updated according to its CPU time (utime + stime) and the +run time (uptime - start time). The longer it runs the smaller is the score. +Badness score is divided by the square root of the CPU time and then by +the double square root of the run time. + +Swapped out tasks are killed first. Half of each child's memory size is added to +the parent's score if they do not share the same memory. Thus forking servers +are the prime candidates to be killed. Having only one 'hungry' child will make +parent less preferable than the child. + +/proc//oom_score shows process' current badness score. + +The following heuristics are then applied: + * if the task was reniced, its score doubles + * superuser or direct hardware access tasks (CAP_SYS_ADMIN, CAP_SYS_RESOURCE + or CAP_SYS_RAWIO) have their score divided by 4 + * if oom condition happened in one cpuset and checked task does not belong + to it, its score is divided by 8 + * the resulting score is multiplied by two to the power of oom_adj, i.e. + points <<= oom_adj when it is positive and + points >>= -(oom_adj) otherwise + +The task with the highest badness score is then selected and its children +are killed, process itself will be killed in an OOM situation when it does +not have children or some of them disabled oom like described above. + 2.13 /proc//oom_score - Display current oom-killer score ------------------------------------------------------------- -- cgit v1.2.1 From baef99a08a2e23d9386b47e53fa5f0d44fc98f66 Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Thu, 29 Jan 2009 14:25:10 -0800 Subject: cgroups: use hierarchy mutex in creation failure path Now, cgrp->sibling is handled under hierarchy mutex. error route should do so, too. Signed-off-by: KAMEZAWA Hiroyuki Cc: Li Zefan Acked-by Paul Menage Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/cgroup.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index c29831076e7a..2ae7cb47dbfa 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -2434,7 +2434,9 @@ static long cgroup_create(struct cgroup *parent, struct dentry *dentry, err_remove: + cgroup_lock_hierarchy(root); list_del(&cgrp->sibling); + cgroup_unlock_hierarchy(root); root->number_of_cgroups--; err_destroy: -- cgit v1.2.1 From 7bcc1bb1232de6efc0b85e0c7fe38e90b2436318 Mon Sep 17 00:00:00 2001 From: Daisuke Nishimura Date: Thu, 29 Jan 2009 14:25:11 -0800 Subject: memcg: get/put parents at create/free The lifetime of struct cgroup and struct mem_cgroup is different and mem_cgroup has its own reference count for handling references from swap_cgroup. This causes strange problem that the parent mem_cgroup dies while child mem_cgroup alive, and this problem causes a bug in case of use_hierarchy==1 because res_counter_uncharge climbs up the tree. This patch is for avoiding it by getting the parent at create, and putting it at freeing. Signed-off-by: Daisuke Nishimura Reviewed-by; KAMEZAWA Hiroyuki Cc: Balbir Singh Cc: Pavel Emelyanov Cc: Li Zefan Cc: Paul Menage Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 4d0ea3ceba6d..76feccd26dc3 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -202,6 +202,7 @@ pcg_default_flags[NR_CHARGE_TYPE] = { static void mem_cgroup_get(struct mem_cgroup *mem); static void mem_cgroup_put(struct mem_cgroup *mem); +static struct mem_cgroup *parent_mem_cgroup(struct mem_cgroup *mem); static void mem_cgroup_charge_statistics(struct mem_cgroup *mem, struct page_cgroup *pc, @@ -2193,10 +2194,23 @@ static void mem_cgroup_get(struct mem_cgroup *mem) static void mem_cgroup_put(struct mem_cgroup *mem) { - if (atomic_dec_and_test(&mem->refcnt)) + if (atomic_dec_and_test(&mem->refcnt)) { + struct mem_cgroup *parent = parent_mem_cgroup(mem); __mem_cgroup_free(mem); + if (parent) + mem_cgroup_put(parent); + } } +/* + * Returns the parent mem_cgroup in memcgroup hierarchy with hierarchy enabled. + */ +static struct mem_cgroup *parent_mem_cgroup(struct mem_cgroup *mem) +{ + if (!mem->res.parent) + return NULL; + return mem_cgroup_from_res_counter(mem->res.parent, res); +} #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP static void __init enable_swap_cgroup(void) @@ -2235,6 +2249,13 @@ mem_cgroup_create(struct cgroup_subsys *ss, struct cgroup *cont) if (parent && parent->use_hierarchy) { res_counter_init(&mem->res, &parent->res); res_counter_init(&mem->memsw, &parent->memsw); + /* + * We increment refcnt of the parent to ensure that we can + * safely access it on res_counter_charge/uncharge. + * This refcnt will be decremented when freeing this + * mem_cgroup(see mem_cgroup_put). + */ + mem_cgroup_get(parent); } else { res_counter_init(&mem->res, NULL); res_counter_init(&mem->memsw, NULL); -- cgit v1.2.1 From 7460db567bbca76bf087d1694d792a1a96bdaa26 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 29 Jan 2009 14:25:12 -0800 Subject: gpiolib: fix request related issue Fix request-already-requested handling in gpio_request(). Signed-off-by: Magnus Damm Acked-by: David Brownell Cc: [2.6.28.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/gpio/gpiolib.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 35e7aea4222c..42fb2fd24c0c 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -789,6 +789,7 @@ int gpio_request(unsigned gpio, const char *label) } else { status = -EBUSY; module_put(chip->owner); + goto done; } if (chip->request) { -- cgit v1.2.1 From 85d9fc89fb0f0703df6444f260187c088a8d59ff Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Thu, 29 Jan 2009 14:25:13 -0800 Subject: memcg: fix refcnt handling at swapoff Now, at swapoff, even while try_charge() fails, commit is executed. This is a bug which turns the refcnt of cgroup_subsys_state negative. Reported-by: Li Zefan Tested-by: Li Zefan Tested-by: Daisuke Nishimura Signed-off-by: KAMEZAWA Hiroyuki Reviewed-by: Daisuke Nishimura Cc: Balbir Singh Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/swapfile.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/mm/swapfile.c b/mm/swapfile.c index f48b831e5e5c..7e6304dfafab 100644 --- a/mm/swapfile.c +++ b/mm/swapfile.c @@ -698,8 +698,10 @@ static int unuse_pte(struct vm_area_struct *vma, pmd_t *pmd, pte_t *pte; int ret = 1; - if (mem_cgroup_try_charge_swapin(vma->vm_mm, page, GFP_KERNEL, &ptr)) + if (mem_cgroup_try_charge_swapin(vma->vm_mm, page, GFP_KERNEL, &ptr)) { ret = -ENOMEM; + goto out_nolock; + } pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl); if (unlikely(!pte_same(*pte, swp_entry_to_pte(entry)))) { @@ -723,6 +725,7 @@ static int unuse_pte(struct vm_area_struct *vma, pmd_t *pmd, activate_page(page); out: pte_unmap_unlock(pte, ptl); +out_nolock: return ret; } -- cgit v1.2.1 From 8d50d369d1b3ccc4d96ce01f62146173ee7064ca Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Thu, 29 Jan 2009 14:25:14 -0800 Subject: memcg: update document to mention that swapoff should be tested Considering the recently found problem "memcg: fix refcnt handling at swapoff", it's better to mention swapoff behavior in the memcg_test document. Signed-off-by: KAMEZAWA Hiroyuki Acked-by: Balbir Singh Cc: Li Zefan Cc: Daisuke Nishimura Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/cgroups/memcg_test.txt | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) diff --git a/Documentation/cgroups/memcg_test.txt b/Documentation/cgroups/memcg_test.txt index 19533f93b7a2..523a9c16c400 100644 --- a/Documentation/cgroups/memcg_test.txt +++ b/Documentation/cgroups/memcg_test.txt @@ -1,6 +1,6 @@ Memory Resource Controller(Memcg) Implementation Memo. -Last Updated: 2008/12/15 -Base Kernel Version: based on 2.6.28-rc8-mm. +Last Updated: 2009/1/19 +Base Kernel Version: based on 2.6.29-rc2. Because VM is getting complex (one of reasons is memcg...), memcg's behavior is complex. This is a document for memcg's internal behavior. @@ -340,3 +340,23 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y. # mount -t cgroup none /cgroup -t cpuset,memory,cpu,devices and do task move, mkdir, rmdir etc...under this. + + 9.7 swapoff. + Besides management of swap is one of complicated parts of memcg, + call path of swap-in at swapoff is not same as usual swap-in path.. + It's worth to be tested explicitly. + + For example, test like following is good. + (Shell-A) + # mount -t cgroup none /cgroup -t memory + # mkdir /cgroup/test + # echo 40M > /cgroup/test/memory.limit_in_bytes + # echo 0 > /cgroup/test/tasks + Run malloc(100M) program under this. You'll see 60M of swaps. + (Shell-B) + # move all tasks in /cgroup/test to /cgroup + # /sbin/swapoff -a + # rmdir /test/cgroup + # kill malloc task. + + Of course, tmpfs v.s. swapoff test should be tested, too. -- cgit v1.2.1 From 6989d5651a16b49908069b514329d5114217ea0e Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Thu, 29 Jan 2009 14:25:14 -0800 Subject: hp-wmi: fix regressions caused by missing if statement Error was introduced in commit fe8e4e039dc3 ("hp-wmi: handle rfkill_register() failure"). Signed-off-by: Frans Pop Acked-by: Larry Finger Acked-by: Matthew Garrett Cc: Matthew Garrett Cc: Len Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/platform/x86/hp-wmi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index 7c789f0a94d7..626042066be4 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -441,6 +441,7 @@ static int __init hp_wmi_bios_setup(struct platform_device *device) bluetooth_rfkill->toggle_radio = hp_wmi_bluetooth_set; bluetooth_rfkill->user_claim_unsupported = 1; err = rfkill_register(bluetooth_rfkill); + if (err) goto register_bluetooth_error; } -- cgit v1.2.1 From 248ae0d43fe7f951352eedfff36572d4b75ce963 Mon Sep 17 00:00:00 2001 From: Alex Buell Date: Thu, 29 Jan 2009 14:25:16 -0800 Subject: fbdev: incorrect URL given in drivers/video/Kconfig Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index c94f71980c1b..f0267706cb45 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -41,7 +41,7 @@ menuconfig FB You need an utility program called fbset to make full use of frame buffer devices. Please read and the Framebuffer-HOWTO at - for more + for more information. Say Y here and to the driver for your graphics board below if you -- cgit v1.2.1 From 299b4eaa302138426d5a9ecd954de1f565d76c94 Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Thu, 29 Jan 2009 14:25:17 -0800 Subject: memcg: NULL pointer dereference at rmdir on some NUMA systems N_POSSIBLE doesn't means there is memory...and force_empty can visit invalid node which have no pgdat. To visit all valid nodes, N_HIGH_MEMORY should be used. Reported-by: Li Zefan Signed-off-by: KAMEZAWA Hiroyuki Tested-by: Li Zefan Cc: Balbir Singh Cc: Daisuke Nishimura Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 76feccd26dc3..8e4be9cb2a6a 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -1685,7 +1685,7 @@ move_account: /* This is for making all *used* pages to be on LRU. */ lru_add_drain_all(); ret = 0; - for_each_node_state(node, N_POSSIBLE) { + for_each_node_state(node, N_HIGH_MEMORY) { for (zid = 0; !ret && zid < MAX_NR_ZONES; zid++) { enum lru_list l; for_each_lru(l) { -- cgit v1.2.1 From e5d9a90c36e05dd080704ea58328c00f64facdc1 Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Thu, 29 Jan 2009 14:25:18 -0800 Subject: alpha: use syscall wrappers Convert OSF syscalls and add alpha specific SYSCALL_ALIAS() macro. Signed-off-by: Ivan Kokshaysky Cc: Richard Henderson Cc: Heiko Carstens Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/alpha/Kconfig | 1 + arch/alpha/kernel/entry.S | 2 +- arch/alpha/kernel/osf_sys.c | 113 ++++++++++++++++++++------------------------ arch/alpha/kernel/signal.c | 18 +++---- arch/alpha/kernel/systbls.S | 52 ++++++++++---------- include/linux/syscalls.h | 5 ++ 6 files changed, 92 insertions(+), 99 deletions(-) diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 6110197757a3..9fb8aae5c391 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -8,6 +8,7 @@ config ALPHA select HAVE_AOUT select HAVE_IDE select HAVE_OPROFILE + select HAVE_SYSCALL_WRAPPERS help The Alpha is a 64-bit general-purpose processor designed and marketed by the Digital Equipment Corporation of blessed memory, diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S index aa2e50cf9857..e4a54b615894 100644 --- a/arch/alpha/kernel/entry.S +++ b/arch/alpha/kernel/entry.S @@ -933,7 +933,7 @@ sys_execve: osf_sigprocmask: .prologue 0 mov $sp, $18 - jmp $31, do_osf_sigprocmask + jmp $31, sys_osf_sigprocmask .end osf_sigprocmask .align 4 diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 18a3ea1aac51..ae41f097864b 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -54,8 +54,7 @@ extern int do_pipe(int *); * identical to OSF as we don't return 0 on success, but doing otherwise * would require changes to libc. Hopefully this is good enough. */ -asmlinkage unsigned long -osf_brk(unsigned long brk) +SYSCALL_DEFINE1(osf_brk, unsigned long, brk) { unsigned long retval = sys_brk(brk); if (brk && brk != retval) @@ -66,9 +65,9 @@ osf_brk(unsigned long brk) /* * This is pure guess-work.. */ -asmlinkage int -osf_set_program_attributes(unsigned long text_start, unsigned long text_len, - unsigned long bss_start, unsigned long bss_len) +SYSCALL_DEFINE4(osf_set_program_attributes, unsigned long, text_start, + unsigned long, text_len, unsigned long, bss_start, + unsigned long, bss_len) { struct mm_struct *mm; @@ -146,9 +145,9 @@ Efault: return -EFAULT; } -asmlinkage int -osf_getdirentries(unsigned int fd, struct osf_dirent __user *dirent, - unsigned int count, long __user *basep) +SYSCALL_DEFINE4(osf_getdirentries, unsigned int, fd, + struct osf_dirent __user *, dirent, unsigned int, count, + long __user *, basep) { int error; struct file *file; @@ -177,9 +176,9 @@ osf_getdirentries(unsigned int fd, struct osf_dirent __user *dirent, #undef NAME_OFFSET -asmlinkage unsigned long -osf_mmap(unsigned long addr, unsigned long len, unsigned long prot, - unsigned long flags, unsigned long fd, unsigned long off) +SYSCALL_DEFINE6(osf_mmap, unsigned long, addr, unsigned long, len, + unsigned long, prot, unsigned long, flags, unsigned long, fd, + unsigned long, off) { struct file *file = NULL; unsigned long ret = -EBADF; @@ -254,8 +253,8 @@ do_osf_statfs(struct dentry * dentry, struct osf_statfs __user *buffer, return error; } -asmlinkage int -osf_statfs(char __user *pathname, struct osf_statfs __user *buffer, unsigned long bufsiz) +SYSCALL_DEFINE3(osf_statfs, char __user *, pathname, + struct osf_statfs __user *, buffer, unsigned long, bufsiz) { struct path path; int retval; @@ -268,8 +267,8 @@ osf_statfs(char __user *pathname, struct osf_statfs __user *buffer, unsigned lon return retval; } -asmlinkage int -osf_fstatfs(unsigned long fd, struct osf_statfs __user *buffer, unsigned long bufsiz) +SYSCALL_DEFINE3(osf_fstatfs, unsigned long, fd, + struct osf_statfs __user *, buffer, unsigned long, bufsiz) { struct file *file; int retval; @@ -368,8 +367,8 @@ osf_procfs_mount(char *dirname, struct procfs_args __user *args, int flags) return do_mount("", dirname, "proc", flags, NULL); } -asmlinkage int -osf_mount(unsigned long typenr, char __user *path, int flag, void __user *data) +SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, char __user *, path, + int, flag, void __user *, data) { int retval = -EINVAL; char *name; @@ -399,8 +398,7 @@ osf_mount(unsigned long typenr, char __user *path, int flag, void __user *data) return retval; } -asmlinkage int -osf_utsname(char __user *name) +SYSCALL_DEFINE1(osf_utsname, char __user *, name) { int error; @@ -423,14 +421,12 @@ osf_utsname(char __user *name) return error; } -asmlinkage unsigned long -sys_getpagesize(void) +SYSCALL_DEFINE0(getpagesize) { return PAGE_SIZE; } -asmlinkage unsigned long -sys_getdtablesize(void) +SYSCALL_DEFINE0(getdtablesize) { return sysctl_nr_open; } @@ -438,8 +434,7 @@ sys_getdtablesize(void) /* * For compatibility with OSF/1 only. Use utsname(2) instead. */ -asmlinkage int -osf_getdomainname(char __user *name, int namelen) +SYSCALL_DEFINE2(osf_getdomainname, char __user *, name, int, namelen) { unsigned len; int i; @@ -527,8 +522,8 @@ enum pl_code { PL_DEL = 5, PL_FDEL = 6 }; -asmlinkage long -osf_proplist_syscall(enum pl_code code, union pl_args __user *args) +SYSCALL_DEFINE2(osf_proplist_syscall, enum pl_code, code, + union pl_args __user *, args) { long error; int __user *min_buf_size_ptr; @@ -567,8 +562,8 @@ osf_proplist_syscall(enum pl_code code, union pl_args __user *args) return error; } -asmlinkage int -osf_sigstack(struct sigstack __user *uss, struct sigstack __user *uoss) +SYSCALL_DEFINE2(osf_sigstack, struct sigstack __user *, uss, + struct sigstack __user *, uoss) { unsigned long usp = rdusp(); unsigned long oss_sp = current->sas_ss_sp + current->sas_ss_size; @@ -608,8 +603,7 @@ osf_sigstack(struct sigstack __user *uss, struct sigstack __user *uoss) return error; } -asmlinkage long -osf_sysinfo(int command, char __user *buf, long count) +SYSCALL_DEFINE3(osf_sysinfo, int, command, char __user *, buf, long, count) { char *sysinfo_table[] = { utsname()->sysname, @@ -647,9 +641,8 @@ osf_sysinfo(int command, char __user *buf, long count) return err; } -asmlinkage unsigned long -osf_getsysinfo(unsigned long op, void __user *buffer, unsigned long nbytes, - int __user *start, void __user *arg) +SYSCALL_DEFINE5(osf_getsysinfo, unsigned long, op, void __user *, buffer, + unsigned long, nbytes, int __user *, start, void __user *, arg) { unsigned long w; struct percpu_struct *cpu; @@ -705,9 +698,8 @@ osf_getsysinfo(unsigned long op, void __user *buffer, unsigned long nbytes, return -EOPNOTSUPP; } -asmlinkage unsigned long -osf_setsysinfo(unsigned long op, void __user *buffer, unsigned long nbytes, - int __user *start, void __user *arg) +SYSCALL_DEFINE5(osf_setsysinfo, unsigned long, op, void __user *, buffer, + unsigned long, nbytes, int __user *, start, void __user *, arg) { switch (op) { case SSI_IEEE_FP_CONTROL: { @@ -880,8 +872,8 @@ jiffies_to_timeval32(unsigned long jiffies, struct timeval32 *value) value->tv_sec = jiffies / HZ; } -asmlinkage int -osf_gettimeofday(struct timeval32 __user *tv, struct timezone __user *tz) +SYSCALL_DEFINE2(osf_gettimeofday, struct timeval32 __user *, tv, + struct timezone __user *, tz) { if (tv) { struct timeval ktv; @@ -896,8 +888,8 @@ osf_gettimeofday(struct timeval32 __user *tv, struct timezone __user *tz) return 0; } -asmlinkage int -osf_settimeofday(struct timeval32 __user *tv, struct timezone __user *tz) +SYSCALL_DEFINE2(osf_settimeofday, struct timeval32 __user *, tv, + struct timezone __user *, tz) { struct timespec kts; struct timezone ktz; @@ -916,8 +908,7 @@ osf_settimeofday(struct timeval32 __user *tv, struct timezone __user *tz) return do_sys_settimeofday(tv ? &kts : NULL, tz ? &ktz : NULL); } -asmlinkage int -osf_getitimer(int which, struct itimerval32 __user *it) +SYSCALL_DEFINE2(osf_getitimer, int, which, struct itimerval32 __user *, it) { struct itimerval kit; int error; @@ -929,8 +920,8 @@ osf_getitimer(int which, struct itimerval32 __user *it) return error; } -asmlinkage int -osf_setitimer(int which, struct itimerval32 __user *in, struct itimerval32 __user *out) +SYSCALL_DEFINE3(osf_setitimer, int, which, struct itimerval32 __user *, in, + struct itimerval32 __user *, out) { struct itimerval kin, kout; int error; @@ -952,8 +943,8 @@ osf_setitimer(int which, struct itimerval32 __user *in, struct itimerval32 __use } -asmlinkage int -osf_utimes(char __user *filename, struct timeval32 __user *tvs) +SYSCALL_DEFINE2(osf_utimes, char __user *, filename, + struct timeval32 __user *, tvs) { struct timespec tv[2]; @@ -979,9 +970,8 @@ osf_utimes(char __user *filename, struct timeval32 __user *tvs) #define MAX_SELECT_SECONDS \ ((unsigned long) (MAX_SCHEDULE_TIMEOUT / HZ)-1) -asmlinkage int -osf_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp, - struct timeval32 __user *tvp) +SYSCALL_DEFINE5(osf_select, int, n, fd_set __user *, inp, fd_set __user *, outp, + fd_set __user *, exp, struct timeval32 __user *, tvp) { struct timespec end_time, *to = NULL; if (tvp) { @@ -1026,8 +1016,7 @@ struct rusage32 { long ru_nivcsw; /* involuntary " */ }; -asmlinkage int -osf_getrusage(int who, struct rusage32 __user *ru) +SYSCALL_DEFINE2(osf_getrusage, int, who, struct rusage32 __user *, ru) { struct rusage32 r; @@ -1053,9 +1042,8 @@ osf_getrusage(int who, struct rusage32 __user *ru) return copy_to_user(ru, &r, sizeof(r)) ? -EFAULT : 0; } -asmlinkage long -osf_wait4(pid_t pid, int __user *ustatus, int options, - struct rusage32 __user *ur) +SYSCALL_DEFINE4(osf_wait4, pid_t, pid, int __user *, ustatus, int, options, + struct rusage32 __user *, ur) { struct rusage r; long ret, err; @@ -1101,8 +1089,8 @@ osf_wait4(pid_t pid, int __user *ustatus, int options, * seems to be a timeval pointer, and I suspect the second * one is the time remaining.. Ho humm.. No documentation. */ -asmlinkage int -osf_usleep_thread(struct timeval32 __user *sleep, struct timeval32 __user *remain) +SYSCALL_DEFINE2(osf_usleep_thread, struct timeval32 __user *, sleep, + struct timeval32 __user *, remain) { struct timeval tmp; unsigned long ticks; @@ -1155,8 +1143,7 @@ struct timex32 { int :32; int :32; int :32; int :32; }; -asmlinkage int -sys_old_adjtimex(struct timex32 __user *txc_p) +SYSCALL_DEFINE1(old_adjtimex, struct timex32 __user *, txc_p) { struct timex txc; int ret; @@ -1267,8 +1254,8 @@ osf_fix_iov_len(const struct iovec __user *iov, unsigned long count) return 0; } -asmlinkage ssize_t -osf_readv(unsigned long fd, const struct iovec __user * vector, unsigned long count) +SYSCALL_DEFINE3(osf_readv, unsigned long, fd, + const struct iovec __user *, vector, unsigned long, count) { if (unlikely(personality(current->personality) == PER_OSF4)) if (osf_fix_iov_len(vector, count)) @@ -1276,8 +1263,8 @@ osf_readv(unsigned long fd, const struct iovec __user * vector, unsigned long co return sys_readv(fd, vector, count); } -asmlinkage ssize_t -osf_writev(unsigned long fd, const struct iovec __user * vector, unsigned long count) +SYSCALL_DEFINE3(osf_writev, unsigned long, fd, + const struct iovec __user *, vector, unsigned long, count) { if (unlikely(personality(current->personality) == PER_OSF4)) if (osf_fix_iov_len(vector, count)) diff --git a/arch/alpha/kernel/signal.c b/arch/alpha/kernel/signal.c index 410af4f3140e..df65eaa84c4c 100644 --- a/arch/alpha/kernel/signal.c +++ b/arch/alpha/kernel/signal.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -51,8 +52,8 @@ static void do_signal(struct pt_regs *, struct switch_stack *, * Note that we don't need to acquire the kernel lock for SMP * operation, as all of this is local to this thread. */ -asmlinkage unsigned long -do_osf_sigprocmask(int how, unsigned long newmask, struct pt_regs *regs) +SYSCALL_DEFINE3(osf_sigprocmask, int, how, unsigned long, newmask, + struct pt_regs *, regs) { unsigned long oldmask = -EINVAL; @@ -81,9 +82,9 @@ do_osf_sigprocmask(int how, unsigned long newmask, struct pt_regs *regs) return oldmask; } -asmlinkage int -osf_sigaction(int sig, const struct osf_sigaction __user *act, - struct osf_sigaction __user *oact) +SYSCALL_DEFINE3(osf_sigaction, int, sig, + const struct osf_sigaction __user *, act, + struct osf_sigaction __user *, oact) { struct k_sigaction new_ka, old_ka; int ret; @@ -112,10 +113,9 @@ osf_sigaction(int sig, const struct osf_sigaction __user *act, return ret; } -asmlinkage long -sys_rt_sigaction(int sig, const struct sigaction __user *act, - struct sigaction __user *oact, - size_t sigsetsize, void __user *restorer) +SYSCALL_DEFINE5(rt_sigaction, int, sig, const struct sigaction __user *, act, + struct sigaction __user *, oact, + size_t, sigsetsize, void __user *, restorer) { struct k_sigaction new_ka, old_ka; int ret; diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S index 9d9e3a98bb95..95c9aef1c106 100644 --- a/arch/alpha/kernel/systbls.S +++ b/arch/alpha/kernel/systbls.S @@ -17,7 +17,7 @@ sys_call_table: .quad sys_write .quad alpha_ni_syscall /* 5 */ .quad sys_close - .quad osf_wait4 + .quad sys_osf_wait4 .quad alpha_ni_syscall .quad sys_link .quad sys_unlink /* 10 */ @@ -27,11 +27,11 @@ sys_call_table: .quad sys_mknod .quad sys_chmod /* 15 */ .quad sys_chown - .quad osf_brk + .quad sys_osf_brk .quad alpha_ni_syscall .quad sys_lseek .quad sys_getxpid /* 20 */ - .quad osf_mount + .quad sys_osf_mount .quad sys_umount .quad sys_setuid .quad sys_getxuid @@ -53,7 +53,7 @@ sys_call_table: .quad alpha_ni_syscall /* 40 */ .quad sys_dup .quad sys_alpha_pipe - .quad osf_set_program_attributes + .quad sys_osf_set_program_attributes .quad alpha_ni_syscall .quad sys_open /* 45 */ .quad alpha_ni_syscall @@ -81,7 +81,7 @@ sys_call_table: .quad sys_newlstat .quad alpha_ni_syscall .quad alpha_ni_syscall /* 70 */ - .quad osf_mmap + .quad sys_osf_mmap .quad alpha_ni_syscall .quad sys_munmap .quad sys_mprotect @@ -94,17 +94,17 @@ sys_call_table: .quad sys_setgroups /* 80 */ .quad alpha_ni_syscall .quad sys_setpgid - .quad osf_setitimer + .quad sys_osf_setitimer .quad alpha_ni_syscall .quad alpha_ni_syscall /* 85 */ - .quad osf_getitimer + .quad sys_osf_getitimer .quad sys_gethostname .quad sys_sethostname .quad sys_getdtablesize .quad sys_dup2 /* 90 */ .quad sys_newfstat .quad sys_fcntl - .quad osf_select + .quad sys_osf_select .quad sys_poll .quad sys_fsync /* 95 */ .quad sys_setpriority @@ -123,22 +123,22 @@ sys_call_table: .quad alpha_ni_syscall .quad alpha_ni_syscall /* 110 */ .quad sys_sigsuspend - .quad osf_sigstack + .quad sys_osf_sigstack .quad sys_recvmsg .quad sys_sendmsg .quad alpha_ni_syscall /* 115 */ - .quad osf_gettimeofday - .quad osf_getrusage + .quad sys_osf_gettimeofday + .quad sys_osf_getrusage .quad sys_getsockopt .quad alpha_ni_syscall #ifdef CONFIG_OSF4_COMPAT - .quad osf_readv /* 120 */ - .quad osf_writev + .quad sys_osf_readv /* 120 */ + .quad sys_osf_writev #else .quad sys_readv /* 120 */ .quad sys_writev #endif - .quad osf_settimeofday + .quad sys_osf_settimeofday .quad sys_fchown .quad sys_fchmod .quad sys_recvfrom /* 125 */ @@ -154,7 +154,7 @@ sys_call_table: .quad sys_socketpair /* 135 */ .quad sys_mkdir .quad sys_rmdir - .quad osf_utimes + .quad sys_osf_utimes .quad alpha_ni_syscall .quad alpha_ni_syscall /* 140 */ .quad sys_getpeername @@ -172,16 +172,16 @@ sys_call_table: .quad alpha_ni_syscall .quad alpha_ni_syscall .quad alpha_ni_syscall /* 155 */ - .quad osf_sigaction + .quad sys_osf_sigaction .quad alpha_ni_syscall .quad alpha_ni_syscall - .quad osf_getdirentries - .quad osf_statfs /* 160 */ - .quad osf_fstatfs + .quad sys_osf_getdirentries + .quad sys_osf_statfs /* 160 */ + .quad sys_osf_fstatfs .quad alpha_ni_syscall .quad alpha_ni_syscall .quad alpha_ni_syscall - .quad osf_getdomainname /* 165 */ + .quad sys_osf_getdomainname /* 165 */ .quad sys_setdomainname .quad alpha_ni_syscall .quad alpha_ni_syscall @@ -224,7 +224,7 @@ sys_call_table: .quad sys_semctl .quad sys_semget /* 205 */ .quad sys_semop - .quad osf_utsname + .quad sys_osf_utsname .quad sys_lchown .quad sys_shmat .quad sys_shmctl /* 210 */ @@ -258,23 +258,23 @@ sys_call_table: .quad alpha_ni_syscall .quad alpha_ni_syscall .quad alpha_ni_syscall /* 240 */ - .quad osf_sysinfo + .quad sys_osf_sysinfo .quad alpha_ni_syscall .quad alpha_ni_syscall - .quad osf_proplist_syscall + .quad sys_osf_proplist_syscall .quad alpha_ni_syscall /* 245 */ .quad alpha_ni_syscall .quad alpha_ni_syscall .quad alpha_ni_syscall .quad alpha_ni_syscall .quad alpha_ni_syscall /* 250 */ - .quad osf_usleep_thread + .quad sys_osf_usleep_thread .quad alpha_ni_syscall .quad alpha_ni_syscall .quad sys_sysfs .quad alpha_ni_syscall /* 255 */ - .quad osf_getsysinfo - .quad osf_setsysinfo + .quad sys_osf_getsysinfo + .quad sys_osf_setsysinfo .quad alpha_ni_syscall .quad alpha_ni_syscall .quad alpha_ni_syscall /* 260 */ diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 16875f89e6a7..0eda02ff2414 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -108,9 +108,14 @@ struct old_linux_dirent; asm ("\t.globl " #alias "\n\t.set " #alias ", " #name "\n" \ "\t.globl ." #alias "\n\t.set ." #alias ", ." #name) #else +#ifdef CONFIG_ALPHA +#define SYSCALL_ALIAS(alias, name) \ + asm ( #alias " = " #name "\n\t.globl " #alias) +#else #define SYSCALL_ALIAS(alias, name) \ asm ("\t.globl " #alias "\n\t.set " #alias ", " #name) #endif +#endif #ifdef CONFIG_HAVE_SYSCALL_WRAPPERS -- cgit v1.2.1 From ee0c468bb151aad23281660152d2894f1e214238 Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Thu, 29 Jan 2009 14:25:19 -0800 Subject: alpha: compile fixes - jensen build: fix conflicting declarations for pci_alloc_consistent() and undefined virt_to_phys(); - SMP: arch/alpha/kernel/smp.c:124: warning: passing argument 2 of '__cpu_test_and_set' discards qualifiers from pointer target type Interestingly, this only happens with gcc-4.2; gcc <= 4.1 and gcc-4.3 are OK. Fixed with extra assignment. Signed-off-by: Ivan Kokshaysky Cc: Richard Henderson Cc: FUJITA Tomonori Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/dma-mapping.h | 2 ++ arch/alpha/kernel/pci-noop.c | 3 ++- arch/alpha/kernel/smp.c | 3 ++- 3 files changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/alpha/include/asm/dma-mapping.h b/arch/alpha/include/asm/dma-mapping.h index a5801ae02e4b..04eb5681448c 100644 --- a/arch/alpha/include/asm/dma-mapping.h +++ b/arch/alpha/include/asm/dma-mapping.h @@ -29,6 +29,8 @@ #else /* no PCI - no IOMMU. */ +#include /* for virt_to_phys() */ + struct scatterlist; void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp); diff --git a/arch/alpha/kernel/pci-noop.c b/arch/alpha/kernel/pci-noop.c index 8ac08311f5a5..c19a376520f4 100644 --- a/arch/alpha/kernel/pci-noop.c +++ b/arch/alpha/kernel/pci-noop.c @@ -109,7 +109,8 @@ sys_pciconfig_write(unsigned long bus, unsigned long dfn, /* Stubs for the routines in pci_iommu.c: */ void * -pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp) +__pci_alloc_consistent(struct pci_dev *pdev, size_t size, + dma_addr_t *dma_addrp, gfp_t gfp) { return NULL; } diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c index d953e510f68d..00f1dc3dfd5f 100644 --- a/arch/alpha/kernel/smp.c +++ b/arch/alpha/kernel/smp.c @@ -120,8 +120,9 @@ void __cpuinit smp_callin(void) { int cpuid = hard_smp_processor_id(); + cpumask_t mask = cpu_online_map; - if (cpu_test_and_set(cpuid, cpu_online_map)) { + if (cpu_test_and_set(cpuid, mask)) { printk("??, cpu 0x%x already present??\n", cpuid); BUG(); } -- cgit v1.2.1 From 945048ca36173315afa2f0c53bed21ba01a588c1 Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Thu, 29 Jan 2009 14:25:20 -0800 Subject: alpha: fix the BUG() macro The commit "alpha: teach the compiler that BUG doesn't return" (ed6b9b97f42c091630335bfb71a2931e6f86388b) moved the asm code into inline function which takes __FILE__ and __LINE__ as arguments. This violates asm constrains there ("i" - an immediate operand with constant value), so that compile may result in warning or error, depending on compiler version. Just adding an infinite loop to the BUG() is sufficient. Signed-off-by: Ivan Kokshaysky Cc: Richard Henderson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/bug.h | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/arch/alpha/include/asm/bug.h b/arch/alpha/include/asm/bug.h index 695a5ee4b5d3..7b85b7c93709 100644 --- a/arch/alpha/include/asm/bug.h +++ b/arch/alpha/include/asm/bug.h @@ -8,17 +8,12 @@ /* ??? Would be nice to use .gprel32 here, but we can't be sure that the function loaded the GP, so this could fail in modules. */ -static inline void ATTRIB_NORET __BUG(const char *file, int line) -{ - __asm__ __volatile__( - "call_pal %0 # bugchk\n\t" - ".long %1\n\t.8byte %2" - : : "i" (PAL_bugchk), "i"(line), "i"(file)); - for ( ; ; ) - ; -} - -#define BUG() __BUG(__FILE__, __LINE__) +#define BUG() { \ + __asm__ __volatile__( \ + "call_pal %0 # bugchk\n\t" \ + ".long %1\n\t.8byte %2" \ + : : "i"(PAL_bugchk), "i"(__LINE__), "i"(__FILE__)); \ + for ( ; ; ); } #define HAVE_ARCH_BUG #endif -- cgit v1.2.1 From 1404f06565ee89e0ce04d4a5859c00b0e3a0dc8d Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Thu, 29 Jan 2009 14:25:21 -0800 Subject: cgroups: fix lock inconsistency in cgroup_clone() I fixed a bug in cgroup_clone() in Linus' tree in commit 7b574b7 ("cgroups: fix a race between cgroup_clone and umount") without noticing there was a cleanup patch in -mm tree that should be rebased (now commit 104cbd5, "cgroups: use task_lock() for access tsk->cgroups safe in cgroup_clone()"), thus resulted in lock inconsistency. Signed-off-by: Li Zefan Acked-by: Paul Menage Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/cgroup.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 2ae7cb47dbfa..0066092de19a 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -2993,20 +2993,21 @@ int cgroup_clone(struct task_struct *tsk, struct cgroup_subsys *subsys, mutex_unlock(&cgroup_mutex); return 0; } - task_lock(tsk); - cg = tsk->cgroups; - parent = task_cgroup(tsk, subsys->subsys_id); /* Pin the hierarchy */ - if (!atomic_inc_not_zero(&parent->root->sb->s_active)) { + if (!atomic_inc_not_zero(&root->sb->s_active)) { /* We race with the final deactivate_super() */ mutex_unlock(&cgroup_mutex); return 0; } /* Keep the cgroup alive */ + task_lock(tsk); + parent = task_cgroup(tsk, subsys->subsys_id); + cg = tsk->cgroups; get_css_set(cg); task_unlock(tsk); + mutex_unlock(&cgroup_mutex); /* Now do the VFS work to create a cgroup */ @@ -3045,7 +3046,7 @@ int cgroup_clone(struct task_struct *tsk, struct cgroup_subsys *subsys, mutex_unlock(&inode->i_mutex); put_css_set(cg); - deactivate_super(parent->root->sb); + deactivate_super(root->sb); /* The cgroup is still accessible in the VFS, but * we're not going to try to rmdir() it at this * point. */ @@ -3071,7 +3072,7 @@ int cgroup_clone(struct task_struct *tsk, struct cgroup_subsys *subsys, mutex_lock(&cgroup_mutex); put_css_set(cg); mutex_unlock(&cgroup_mutex); - deactivate_super(parent->root->sb); + deactivate_super(root->sb); return ret; } -- cgit v1.2.1 From 804b3c28a4e4fa1c224571bf76edb534b9c4b1ed Mon Sep 17 00:00:00 2001 From: Paul Menage Date: Thu, 29 Jan 2009 14:25:21 -0800 Subject: cgroups: add cpu_relax() calls in css_tryget() and cgroup_clear_css_refs() css_tryget() and cgroup_clear_css_refs() contain polling loops; these loops should have cpu_relax calls in them to reduce cross-cache traffic. Signed-off-by: Paul Menage Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/cgroup.h | 1 + kernel/cgroup.c | 7 +++++-- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index e267e62827bb..e4e8e117d27d 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -99,6 +99,7 @@ static inline bool css_tryget(struct cgroup_subsys_state *css) while (!atomic_inc_not_zero(&css->refcnt)) { if (test_bit(CSS_REMOVED, &css->flags)) return false; + cpu_relax(); } return true; } diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 0066092de19a..492215d67fa5 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -2509,7 +2509,7 @@ static int cgroup_clear_css_refs(struct cgroup *cgrp) for_each_subsys(cgrp->root, ss) { struct cgroup_subsys_state *css = cgrp->subsys[ss->subsys_id]; int refcnt; - do { + while (1) { /* We can only remove a CSS with a refcnt==1 */ refcnt = atomic_read(&css->refcnt); if (refcnt > 1) { @@ -2523,7 +2523,10 @@ static int cgroup_clear_css_refs(struct cgroup *cgrp) * css_tryget() to spin until we set the * CSS_REMOVED bits or abort */ - } while (atomic_cmpxchg(&css->refcnt, refcnt, 0) != refcnt); + if (atomic_cmpxchg(&css->refcnt, refcnt, 0) == refcnt) + break; + cpu_relax(); + } } done: for_each_subsys(cgrp->root, ss) { -- cgit v1.2.1 From 839ec5452ebfd5905b9c69b20ceb640903a8ea1a Mon Sep 17 00:00:00 2001 From: Paul Menage Date: Thu, 29 Jan 2009 14:25:22 -0800 Subject: cgroup: fix root_count when mount fails due to busy subsystem root_count was being incremented in cgroup_get_sb() after all error checking was complete, but decremented in cgroup_kill_sb(), which can be called on a superblock that we gave up on due to an error. This patch changes cgroup_kill_sb() to only decrement root_count if the root was previously linked into the list of roots. Signed-off-by: Paul Menage Tested-by: Serge Hallyn Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/cgroup.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 492215d67fa5..5a54ff42874e 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -1115,8 +1115,10 @@ static void cgroup_kill_sb(struct super_block *sb) { } write_unlock(&css_set_lock); - list_del(&root->root_list); - root_count--; + if (!list_empty(&root->root_list)) { + list_del(&root->root_list); + root_count--; + } mutex_unlock(&cgroup_mutex); -- cgit v1.2.1 From c189f4ec955e1fe4a2a2742d028aeecc52a5848a Mon Sep 17 00:00:00 2001 From: David Altobelli Date: Thu, 29 Jan 2009 14:25:23 -0800 Subject: hpilo: increment version Bump hpilo module version to indicate that the open/close bug is fixed. Signed-off-by: David Altobelli Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/hpilo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c index 05e298289238..10c421b73eaf 100644 --- a/drivers/misc/hpilo.c +++ b/drivers/misc/hpilo.c @@ -758,7 +758,7 @@ static void __exit ilo_exit(void) class_destroy(ilo_class); } -MODULE_VERSION("0.05"); +MODULE_VERSION("0.06"); MODULE_ALIAS(ILO_NAME); MODULE_DESCRIPTION(ILO_NAME); MODULE_AUTHOR("David Altobelli "); -- cgit v1.2.1 From fb9f88e1dc76f9feb39d39c40a5d61aad6df4388 Mon Sep 17 00:00:00 2001 From: Bharath Ramesh Date: Thu, 29 Jan 2009 14:25:24 -0800 Subject: hwmon: applesmc: add support for MacPro 3 temperature sensors MacPro 3 have more temperature sensors than the previous MacPro's also the sensor THTG has been removed. This patch add supports for the newer temperature sensors in the MacPro3. Signed-off-by: Bharath Ramesh Signed-off-by: Henrik Rydberg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/hwmon/applesmc.c | 30 +++++++++++++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-) diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index e30186236588..678e34b01e52 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -83,7 +83,7 @@ /* * Temperature sensors keys (sp78 - 2 bytes). */ -static const char* temperature_sensors_sets[][36] = { +static const char *temperature_sensors_sets[][41] = { /* Set 0: Macbook Pro */ { "TA0P", "TB0T", "TC0D", "TC0P", "TG0H", "TG0P", "TG0T", "Th0H", "Th1H", "Tm0P", "Ts0P", "Ts1P", NULL }, @@ -135,6 +135,13 @@ static const char* temperature_sensors_sets[][36] = { { "TB0T", "TB1S", "TB1T", "TB2S", "TB2T", "TC0D", "TN0D", "TTF0", "TV0P", "TVFP", "TW0P", "Th0P", "Tp0P", "Tp1P", "TpFP", "Ts0P", "Ts0S", NULL }, +/* Set 16: Mac Pro 3,1 (2 x Quad-Core) */ + { "TA0P", "TCAG", "TCAH", "TCBG", "TCBH", "TC0C", "TC0D", "TC0P", + "TC1C", "TC1D", "TC2C", "TC2D", "TC3C", "TC3D", "TH0P", "TH1P", + "TH2P", "TH3P", "TMAP", "TMAS", "TMBS", "TM0P", "TM0S", "TM1P", + "TM1S", "TM2P", "TM2S", "TM3S", "TM8P", "TM8S", "TM9P", "TM9S", + "TN0C", "TN0D", "TN0H", "TS0C", "Tp0C", "Tp1C", "Tv0S", "Tv1S", + NULL }, }; /* List of keys used to read/write fan speeds */ @@ -1153,6 +1160,16 @@ static SENSOR_DEVICE_ATTR(temp34_input, S_IRUGO, applesmc_show_temperature, NULL, 33); static SENSOR_DEVICE_ATTR(temp35_input, S_IRUGO, applesmc_show_temperature, NULL, 34); +static SENSOR_DEVICE_ATTR(temp36_input, S_IRUGO, + applesmc_show_temperature, NULL, 35); +static SENSOR_DEVICE_ATTR(temp37_input, S_IRUGO, + applesmc_show_temperature, NULL, 36); +static SENSOR_DEVICE_ATTR(temp38_input, S_IRUGO, + applesmc_show_temperature, NULL, 37); +static SENSOR_DEVICE_ATTR(temp39_input, S_IRUGO, + applesmc_show_temperature, NULL, 38); +static SENSOR_DEVICE_ATTR(temp40_input, S_IRUGO, + applesmc_show_temperature, NULL, 39); static struct attribute *temperature_attributes[] = { &sensor_dev_attr_temp1_input.dev_attr.attr, @@ -1190,6 +1207,11 @@ static struct attribute *temperature_attributes[] = { &sensor_dev_attr_temp33_input.dev_attr.attr, &sensor_dev_attr_temp34_input.dev_attr.attr, &sensor_dev_attr_temp35_input.dev_attr.attr, + &sensor_dev_attr_temp36_input.dev_attr.attr, + &sensor_dev_attr_temp37_input.dev_attr.attr, + &sensor_dev_attr_temp38_input.dev_attr.attr, + &sensor_dev_attr_temp39_input.dev_attr.attr, + &sensor_dev_attr_temp40_input.dev_attr.attr, NULL }; @@ -1312,6 +1334,8 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = { { .accelerometer = 0, .light = 0, .temperature_set = 14 }, /* MacBook Air 2,1: accelerometer, backlight and temperature set 15 */ { .accelerometer = 1, .light = 1, .temperature_set = 15 }, +/* MacPro3,1: temperature set 16 */ + { .accelerometer = 0, .light = 0, .temperature_set = 16 }, }; /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1". @@ -1369,6 +1393,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = { DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") }, &applesmc_dmi_data[4]}, + { applesmc_dmi_match, "Apple MacPro3", { + DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), + DMI_MATCH(DMI_PRODUCT_NAME, "MacPro3") }, + &applesmc_dmi_data[16]}, { applesmc_dmi_match, "Apple MacPro", { DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), DMI_MATCH(DMI_PRODUCT_NAME, "MacPro") }, -- cgit v1.2.1 From 3095eb87bb36ae880608fe3fc46cfd59ced1f319 Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Thu, 29 Jan 2009 14:25:25 -0800 Subject: hp-wmi: set initial docking state If the initial state is not set when the input device is set up, the first docking event after the module is loaded will be lost. Signed-off-by: Frans Pop Acked-by: Matthew Garrett Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/platform/x86/hp-wmi.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index 626042066be4..de91ddab0a86 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -382,6 +382,11 @@ static int __init hp_wmi_input_setup(void) case KE_SW: set_bit(EV_SW, hp_wmi_input_dev->evbit); set_bit(key->keycode, hp_wmi_input_dev->swbit); + + /* Set initial dock state */ + input_report_switch(hp_wmi_input_dev, key->keycode, + hp_wmi_dock_state()); + input_sync(hp_wmi_input_dev); break; } } -- cgit v1.2.1 From 9df04e1f25effde823a600e755b51475d438f56b Mon Sep 17 00:00:00 2001 From: Davide Libenzi Date: Thu, 29 Jan 2009 14:25:26 -0800 Subject: epoll: drop max_user_instances and rely only on max_user_watches Linus suggested to put limits where the money is, and max_user_watches already does that w/out the need of max_user_instances. That has the advantage to mitigate the potential DoS while allowing pretty generous default behavior. Allowing top 4% of low memory (per user) to be allocated in epoll watches, we have: LOMEM MAX_WATCHES (per user) 512MB ~178000 1GB ~356000 2GB ~712000 A box with 512MB of lomem, will meet some challenge in hitting 180K watches, socket buffers math teaches us. No more max_user_instances limits then. Signed-off-by: Davide Libenzi Cc: Willy Tarreau Cc: Michael Kerrisk Cc: Bron Gondwana Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/eventpoll.c | 22 ++++------------------ include/linux/sched.h | 1 - 2 files changed, 4 insertions(+), 19 deletions(-) diff --git a/fs/eventpoll.c b/fs/eventpoll.c index ba2f9ec71192..011b9b8c90c6 100644 --- a/fs/eventpoll.c +++ b/fs/eventpoll.c @@ -234,8 +234,6 @@ struct ep_pqueue { /* * Configuration options available inside /proc/sys/fs/epoll/ */ -/* Maximum number of epoll devices, per user */ -static int max_user_instances __read_mostly; /* Maximum number of epoll watched descriptors, per user */ static int max_user_watches __read_mostly; @@ -260,14 +258,6 @@ static struct kmem_cache *pwq_cache __read_mostly; static int zero; ctl_table epoll_table[] = { - { - .procname = "max_user_instances", - .data = &max_user_instances, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = &proc_dointvec_minmax, - .extra1 = &zero, - }, { .procname = "max_user_watches", .data = &max_user_watches, @@ -491,7 +481,6 @@ static void ep_free(struct eventpoll *ep) mutex_unlock(&epmutex); mutex_destroy(&ep->mtx); - atomic_dec(&ep->user->epoll_devs); free_uid(ep->user); kfree(ep); } @@ -581,10 +570,6 @@ static int ep_alloc(struct eventpoll **pep) struct eventpoll *ep; user = get_current_user(); - error = -EMFILE; - if (unlikely(atomic_read(&user->epoll_devs) >= - max_user_instances)) - goto free_uid; error = -ENOMEM; ep = kzalloc(sizeof(*ep), GFP_KERNEL); if (unlikely(!ep)) @@ -1141,7 +1126,6 @@ SYSCALL_DEFINE1(epoll_create1, int, flags) flags & O_CLOEXEC); if (fd < 0) ep_free(ep); - atomic_inc(&ep->user->epoll_devs); error_return: DNPRINTK(3, (KERN_INFO "[%p] eventpoll: sys_epoll_create(%d) = %d\n", @@ -1366,8 +1350,10 @@ static int __init eventpoll_init(void) struct sysinfo si; si_meminfo(&si); - max_user_instances = 128; - max_user_watches = (((si.totalram - si.totalhigh) / 32) << PAGE_SHIFT) / + /* + * Allows top 4% of lomem to be allocated for epoll watches (per user). + */ + max_user_watches = (((si.totalram - si.totalhigh) / 25) << PAGE_SHIFT) / EP_ITEM_COST; /* Initialize the structure used to perform safe poll wait head wake ups */ diff --git a/include/linux/sched.h b/include/linux/sched.h index 02e16d207304..5a7c76388731 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -630,7 +630,6 @@ struct user_struct { atomic_t inotify_devs; /* How many inotify devs does this user have opened? */ #endif #ifdef CONFIG_EPOLL - atomic_t epoll_devs; /* The number of epoll descriptors currently open */ atomic_t epoll_watches; /* The number of file descriptors currently watched */ #endif #ifdef CONFIG_POSIX_MQUEUE -- cgit v1.2.1 From 726a6699267e36c66043a55b13dfeec3d9925452 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 29 Jan 2009 14:25:27 -0800 Subject: drivers/gpu/drm/i915/intel_lvds.c: fix locking snafu s/unlock/lock/ Addresses http://bugzilla.kernel.org/show_bug.cgi?id=12575 Reported-by: Daniel Vetter Cc: Dave Airlie Acked-by: Jesse Barnes Cc: Eric Anholt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/gpu/drm/i915/intel_lvds.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 6b1148fc2cbe..b36a5214d8df 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -311,7 +311,7 @@ static int intel_lvds_get_modes(struct drm_connector *connector) if (dev_priv->panel_fixed_mode != NULL) { struct drm_display_mode *mode; - mutex_unlock(&dev->mode_config.mutex); + mutex_lock(&dev->mode_config.mutex); mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode); drm_mode_probed_add(connector, mode); mutex_unlock(&dev->mode_config.mutex); -- cgit v1.2.1 From 5872fb94f85d2e4fdef94657bd14e1a492df9825 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 29 Jan 2009 16:28:02 -0800 Subject: Documentation: move DMA-mapping.txt to Doc/PCI/ Move DMA-mapping.txt to Documentation/PCI/. DMA-mapping.txt was supposed to be moved from Documentation/ to Documentation/PCI/. The 00-INDEX files in those two directories were updated, along with a few other text files, but the file itself somehow escaped being moved, so move it and update more text files and source files with its new location. Signed-off-by: Randy Dunlap Acked-by: Greg Kroah-Hartman cc: Jesse Barnes Signed-off-by: Linus Torvalds --- Documentation/DMA-API.txt | 2 +- Documentation/IO-mapping.txt | 4 ++-- Documentation/block/biodoc.txt | 5 +++-- Documentation/usb/dma.txt | 11 ++++++----- arch/ia64/hp/common/sba_iommu.c | 12 ++++++------ arch/parisc/include/asm/dma-mapping.h | 2 +- arch/parisc/kernel/pci-dma.c | 2 +- arch/x86/include/asm/dma-mapping.h | 4 ++-- arch/x86/kernel/pci-gart_64.c | 2 +- drivers/parisc/sba_iommu.c | 18 +++++++++--------- drivers/staging/altpciechdma/altpciechdma.c | 4 ++-- include/media/videobuf-dma-sg.h | 2 +- 12 files changed, 35 insertions(+), 33 deletions(-) diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt index 52441694fe03..2a3fcc55e981 100644 --- a/Documentation/DMA-API.txt +++ b/Documentation/DMA-API.txt @@ -5,7 +5,7 @@ This document describes the DMA API. For a more gentle introduction phrased in terms of the pci_ equivalents (and actual examples) see -DMA-mapping.txt +Documentation/PCI/PCI-DMA-mapping.txt. This API is split into two pieces. Part I describes the API and the corresponding pci_ API. Part II describes the extensions to the API diff --git a/Documentation/IO-mapping.txt b/Documentation/IO-mapping.txt index 86edb61bdee6..78a440695e11 100644 --- a/Documentation/IO-mapping.txt +++ b/Documentation/IO-mapping.txt @@ -1,6 +1,6 @@ [ NOTE: The virt_to_bus() and bus_to_virt() functions have been - superseded by the functionality provided by the PCI DMA - interface (see Documentation/DMA-mapping.txt). They continue + superseded by the functionality provided by the PCI DMA interface + (see Documentation/PCI/PCI-DMA-mapping.txt). They continue to be documented below for historical purposes, but new code must not use them. --davidm 00/12/12 ] diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index 3c5434c83daf..5d2480d33b43 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -186,8 +186,9 @@ a virtual address mapping (unlike the earlier scheme of virtual address do not have a corresponding kernel virtual address space mapping) and low-memory pages. -Note: Please refer to DMA-mapping.txt for a discussion on PCI high mem DMA -aspects and mapping of scatter gather lists, and support for 64 bit PCI. +Note: Please refer to Documentation/PCI/PCI-DMA-mapping.txt for a discussion +on PCI high mem DMA aspects and mapping of scatter gather lists, and support +for 64 bit PCI. Special handling is required only for cases where i/o needs to happen on pages at physical memory addresses beyond what the device can support. In these diff --git a/Documentation/usb/dma.txt b/Documentation/usb/dma.txt index e8b50b7de9d9..cfdcd16e3abf 100644 --- a/Documentation/usb/dma.txt +++ b/Documentation/usb/dma.txt @@ -6,8 +6,9 @@ in the kernel usb programming guide (kerneldoc, from the source code). API OVERVIEW The big picture is that USB drivers can continue to ignore most DMA issues, -though they still must provide DMA-ready buffers (see DMA-mapping.txt). -That's how they've worked through the 2.4 (and earlier) kernels. +though they still must provide DMA-ready buffers (see +Documentation/PCI/PCI-DMA-mapping.txt). That's how they've worked through +the 2.4 (and earlier) kernels. OR: they can now be DMA-aware. @@ -62,8 +63,8 @@ and effects like cache-trashing can impose subtle penalties. force a consistent memory access ordering by using memory barriers. It's not using a streaming DMA mapping, so it's good for small transfers on systems where the I/O would otherwise thrash an IOMMU mapping. (See - Documentation/DMA-mapping.txt for definitions of "coherent" and "streaming" - DMA mappings.) + Documentation/PCI/PCI-DMA-mapping.txt for definitions of "coherent" and + "streaming" DMA mappings.) Asking for 1/Nth of a page (as well as asking for N pages) is reasonably space-efficient. @@ -93,7 +94,7 @@ WORKING WITH EXISTING BUFFERS Existing buffers aren't usable for DMA without first being mapped into the DMA address space of the device. However, most buffers passed to your driver can safely be used with such DMA mapping. (See the first section -of DMA-mapping.txt, titled "What memory is DMA-able?") +of Documentation/PCI/PCI-DMA-mapping.txt, titled "What memory is DMA-able?") - When you're using scatterlists, you can map everything at once. On some systems, this kicks in an IOMMU and turns the scatterlists into single diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c index d98f0f4ff83f..6d5e6c5630e3 100644 --- a/arch/ia64/hp/common/sba_iommu.c +++ b/arch/ia64/hp/common/sba_iommu.c @@ -906,7 +906,7 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt) * @dir: R/W or both. * @attrs: optional dma attributes * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ dma_addr_t sba_map_single_attrs(struct device *dev, void *addr, size_t size, int dir, @@ -1024,7 +1024,7 @@ sba_mark_clean(struct ioc *ioc, dma_addr_t iova, size_t size) * @dir: R/W or both. * @attrs: optional dma attributes * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ void sba_unmap_single_attrs(struct device *dev, dma_addr_t iova, size_t size, int dir, struct dma_attrs *attrs) @@ -1102,7 +1102,7 @@ EXPORT_SYMBOL(sba_unmap_single_attrs); * @size: number of bytes mapped in driver buffer. * @dma_handle: IOVA of new buffer. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ void * sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flags) @@ -1165,7 +1165,7 @@ sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp * @vaddr: virtual address IOVA of "consistent" buffer. * @dma_handler: IO virtual address of "consistent" buffer. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ void sba_free_coherent (struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle) { @@ -1420,7 +1420,7 @@ sba_coalesce_chunks(struct ioc *ioc, struct device *dev, * @dir: R/W or both. * @attrs: optional dma attributes * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ int sba_map_sg_attrs(struct device *dev, struct scatterlist *sglist, int nents, int dir, struct dma_attrs *attrs) @@ -1512,7 +1512,7 @@ EXPORT_SYMBOL(sba_map_sg_attrs); * @dir: R/W or both. * @attrs: optional dma attributes * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ void sba_unmap_sg_attrs(struct device *dev, struct scatterlist *sglist, int nents, int dir, struct dma_attrs *attrs) diff --git a/arch/parisc/include/asm/dma-mapping.h b/arch/parisc/include/asm/dma-mapping.h index 53af696f23d2..da6943380908 100644 --- a/arch/parisc/include/asm/dma-mapping.h +++ b/arch/parisc/include/asm/dma-mapping.h @@ -5,7 +5,7 @@ #include #include -/* See Documentation/DMA-mapping.txt */ +/* See Documentation/PCI/PCI-DMA-mapping.txt */ struct hppa_dma_ops { int (*dma_supported)(struct device *dev, u64 mask); void *(*alloc_consistent)(struct device *dev, size_t size, dma_addr_t *iova, gfp_t flag); diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c index ccd61b9567a6..df47895db828 100644 --- a/arch/parisc/kernel/pci-dma.c +++ b/arch/parisc/kernel/pci-dma.c @@ -2,7 +2,7 @@ ** PARISC 1.1 Dynamic DMA mapping support. ** This implementation is for PA-RISC platforms that do not support ** I/O TLBs (aka DMA address translation hardware). -** See Documentation/DMA-mapping.txt for interface definitions. +** See Documentation/PCI/PCI-DMA-mapping.txt for interface definitions. ** ** (c) Copyright 1999,2000 Hewlett-Packard Company ** (c) Copyright 2000 Grant Grundler diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h index 4035357f5b9d..132a134d12f2 100644 --- a/arch/x86/include/asm/dma-mapping.h +++ b/arch/x86/include/asm/dma-mapping.h @@ -2,8 +2,8 @@ #define _ASM_X86_DMA_MAPPING_H /* - * IOMMU interface. See Documentation/DMA-mapping.txt and DMA-API.txt for - * documentation. + * IOMMU interface. See Documentation/PCI/PCI-DMA-mapping.txt and + * Documentation/DMA-API.txt for documentation. */ #include diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index 00c2bcd41463..d5768b1af080 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -5,7 +5,7 @@ * This allows to use PCI devices that only support 32bit addresses on systems * with more than 4GB. * - * See Documentation/DMA-mapping.txt for the interface specification. + * See Documentation/PCI/PCI-DMA-mapping.txt for the interface specification. * * Copyright 2002 Andi Kleen, SuSE Labs. * Subject to the GNU General Public License v2 only. diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c index 3fac8f81d59d..a70cf16ee1ad 100644 --- a/drivers/parisc/sba_iommu.c +++ b/drivers/parisc/sba_iommu.c @@ -668,7 +668,7 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt) * @dev: instance of PCI owned by the driver that's asking * @mask: number of address bits this PCI device can handle * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static int sba_dma_supported( struct device *dev, u64 mask) { @@ -680,8 +680,8 @@ static int sba_dma_supported( struct device *dev, u64 mask) return(0); } - /* Documentation/DMA-mapping.txt tells drivers to try 64-bit first, - * then fall back to 32-bit if that fails. + /* Documentation/PCI/PCI-DMA-mapping.txt tells drivers to try 64-bit + * first, then fall back to 32-bit if that fails. * We are just "encouraging" 32-bit DMA masks here since we can * never allow IOMMU bypass unless we add special support for ZX1. */ @@ -706,7 +706,7 @@ static int sba_dma_supported( struct device *dev, u64 mask) * @size: number of bytes to map in driver buffer. * @direction: R/W or both. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static dma_addr_t sba_map_single(struct device *dev, void *addr, size_t size, @@ -785,7 +785,7 @@ sba_map_single(struct device *dev, void *addr, size_t size, * @size: number of bytes mapped in driver buffer. * @direction: R/W or both. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static void sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, @@ -861,7 +861,7 @@ sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, * @size: number of bytes mapped in driver buffer. * @dma_handle: IOVA of new buffer. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static void *sba_alloc_consistent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t gfp) @@ -892,7 +892,7 @@ static void *sba_alloc_consistent(struct device *hwdev, size_t size, * @vaddr: virtual address IOVA of "consistent" buffer. * @dma_handler: IO virtual address of "consistent" buffer. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static void sba_free_consistent(struct device *hwdev, size_t size, void *vaddr, @@ -927,7 +927,7 @@ int dump_run_sg = 0; * @nents: number of entries in list * @direction: R/W or both. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static int sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents, @@ -1011,7 +1011,7 @@ sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents, * @nents: number of entries in list * @direction: R/W or both. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static void sba_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents, diff --git a/drivers/staging/altpciechdma/altpciechdma.c b/drivers/staging/altpciechdma/altpciechdma.c index 8e2b4ca0651d..f516140ca976 100644 --- a/drivers/staging/altpciechdma/altpciechdma.c +++ b/drivers/staging/altpciechdma/altpciechdma.c @@ -531,7 +531,7 @@ static int __devinit dma_test(struct ape_dev *ape, struct pci_dev *dev) goto fail; /* allocate and map coherently-cached memory for a DMA-able buffer */ - /* @see 2.6.26.2/Documentation/DMA-mapping.txt line 318 */ + /* @see Documentation/PCI/PCI-DMA-mapping.txt, near line 318 */ buffer_virt = (u8 *)pci_alloc_consistent(dev, PAGE_SIZE * 4, &buffer_bus); if (!buffer_virt) { printk(KERN_DEBUG "Could not allocate coherent DMA buffer.\n"); @@ -846,7 +846,7 @@ static int __devinit probe(struct pci_dev *dev, const struct pci_device_id *id) #if 1 // @todo For now, disable 64-bit, because I do not understand the implications (DAC!) /* query for DMA transfer */ - /* @see Documentation/DMA-mapping.txt */ + /* @see Documentation/PCI/PCI-DMA-mapping.txt */ if (!pci_set_dma_mask(dev, DMA_64BIT_MASK)) { pci_set_consistent_dma_mask(dev, DMA_64BIT_MASK); /* use 64-bit DMA */ diff --git a/include/media/videobuf-dma-sg.h b/include/media/videobuf-dma-sg.h index 90edd22d343c..dda47f0082e9 100644 --- a/include/media/videobuf-dma-sg.h +++ b/include/media/videobuf-dma-sg.h @@ -49,7 +49,7 @@ struct scatterlist* videobuf_pages_to_sg(struct page **pages, int nr_pages, * does memory allocation too using vmalloc_32(). * * videobuf_dma_*() - * see Documentation/DMA-mapping.txt, these functions to + * see Documentation/PCI/PCI-DMA-mapping.txt, these functions to * basically the same. The map function does also build a * scatterlist for the buffer (and unmap frees it ...) * -- cgit v1.2.1 From 0acbc6c651911dc9ffb4f59b34306bc1ccb751e5 Mon Sep 17 00:00:00 2001 From: Teemu Likonen Date: Thu, 29 Jan 2009 16:28:16 -0800 Subject: Documentation: update CodingStyle tips for Emacs users With the previous Emacs tips example the kernel style was made available for files in the kernel-tree only. This patch updates the tip to add a separate cc-mode indent style ("linux-tabs-only"). This makes it easy to switch between different indent styles and also makes the kernel style easily available for any filetype mode (c++, awk, ...) that is managed by the Emacs cc-mode. Signed-off-by: Teemu Likonen Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- Documentation/CodingStyle | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle index 1875e502f872..7b5762eded2c 100644 --- a/Documentation/CodingStyle +++ b/Documentation/CodingStyle @@ -483,6 +483,16 @@ values. To do the latter, you can stick the following in your .emacs file: (* (max steps 1) c-basic-offset))) +(add-hook 'c-mode-common-hook + (lambda () + ;; Add kernel style + (c-add-style + "linux-tabs-only" + '("linux" (c-offsets-alist + (arglist-cont-nonempty + c-lineup-gcc-asm-reg + c-lineup-arglist-tabs-only)))))) + (add-hook 'c-mode-hook (lambda () (let ((filename (buffer-file-name))) @@ -490,10 +500,7 @@ values. To do the latter, you can stick the following in your .emacs file: (when (and filename (string-match "~/src/linux-trees" filename)) (setq indent-tabs-mode t) - (c-set-style "linux") - (c-set-offset 'arglist-cont-nonempty - '(c-lineup-gcc-asm-reg - c-lineup-arglist-tabs-only)))))) + (c-set-style "linux-tabs-only"))))) This will make emacs go better with the kernel coding style for C files below ~/src/linux-trees. -- cgit v1.2.1 From 70221395ba980392ba98c1d78f6c9f77be03df9e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 29 Jan 2009 16:28:28 -0800 Subject: fix emacs indenting howto filename expansion I don't think emacs understands tilde expansion, so use "expand-file-name" to do that. Signed-off-by: Dan Carpenter Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- Documentation/CodingStyle | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle index 7b5762eded2c..72968cd5eaf3 100644 --- a/Documentation/CodingStyle +++ b/Documentation/CodingStyle @@ -498,7 +498,8 @@ values. To do the latter, you can stick the following in your .emacs file: (let ((filename (buffer-file-name))) ;; Enable kernel mode for the appropriate files (when (and filename - (string-match "~/src/linux-trees" filename)) + (string-match (expand-file-name "~/src/linux-trees") + filename)) (setq indent-tabs-mode t) (c-set-style "linux-tabs-only"))))) -- cgit v1.2.1 From 242f45da5b7bf63c50f1f18301750712e7885dd6 Mon Sep 17 00:00:00 2001 From: Bill Nottingham Date: Thu, 29 Jan 2009 16:28:40 -0800 Subject: Documentation/Changes: add required versions for new filesystems btrfs requires version 0.18 of its tools, and squashfs requires 4.0. ext3 should use and ext4 requires v1.41.4 of e2fsprogs. Signed-off-by: Bill Nottingham Signed-off-by: Randy Dunlap cc: Ted Tso Signed-off-by: Linus Torvalds --- Documentation/Changes | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/Documentation/Changes b/Documentation/Changes index cb2b141b1c3e..b95082be4d5e 100644 --- a/Documentation/Changes +++ b/Documentation/Changes @@ -33,10 +33,12 @@ o Gnu make 3.79.1 # make --version o binutils 2.12 # ld -v o util-linux 2.10o # fdformat --version o module-init-tools 0.9.10 # depmod -V -o e2fsprogs 1.29 # tune2fs +o e2fsprogs 1.41.4 # e2fsck -V o jfsutils 1.1.3 # fsck.jfs -V o reiserfsprogs 3.6.3 # reiserfsck -V 2>&1|grep reiserfsprogs o xfsprogs 2.6.0 # xfs_db -V +o squashfs-tools 4.0 # mksquashfs -version +o btrfs-progs 0.18 # btrfsck o pcmciautils 004 # pccardctl -V o quota-tools 3.09 # quota -V o PPP 2.4.0 # pppd --version -- cgit v1.2.1 From 1737ef7598d3515fdc11cb9ba7e054f334404e04 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Thu, 29 Jan 2009 02:30:56 +0300 Subject: sata_sil: Fix build breakage Commit e57db7b (SATA Sil: Blacklist system that spins off disks during ACPI power off) breaks build like the following, in both cases when CONFIG_DMI set or not. drivers/ata/sata_sil.c: In function 'sil_broken_system_poweroff': drivers/ata/sata_sil.c:713: error: implicit declaration of function 'dmi_first_match' drivers/ata/sata_sil.c:713: warning: initialization makes pointer from integer without a cast sata_sil.c should include dmi.h Signed-off-by: Alexander Beregalov Signed-off-by: Linus Torvalds --- drivers/ata/sata_sil.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index bfd55b085ae6..9f029595f454 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -44,6 +44,7 @@ #include #include #include +#include #define DRV_NAME "sata_sil" #define DRV_VERSION "2.4" -- cgit v1.2.1 From b9ec63f78b425c0e16cc95605b5d4ff2dc228b97 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 30 Jan 2009 00:00:24 -0500 Subject: ext4: Remove bogus BUG() check in ext4_bmap() The code to support journal-less ext4 operation added a BUG to ext4_bmap() which fired if there was no journal and the EXT4_STATE_JDATA bit was set in the i_state field. This caused running the filefrag program (which uses the FIMBAP ioctl) to trigger a BUG(). The EXT4_STATE_JDATA bit is only used for ext4_bmap(), and it's harmless for the bit to be set. We could add a check in __ext4_journalled_writepage() and ext4_journalled_write_end() to only set the EXT4_STATE_JDATA bit if the journal is present, but that adds an extra test and jump instruction. It's easier to simply remove the BUG check. http://bugzilla.kernel.org/show_bug.cgi?id=12568 Signed-off-by: "Theodore Ts'o" Cc: stable@kernel.org --- fs/ext4/inode.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index b4386dafeb0c..03ba20be1329 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2821,9 +2821,6 @@ static sector_t ext4_bmap(struct address_space *mapping, sector_t block) filemap_write_and_wait(mapping); } - BUG_ON(!EXT4_JOURNAL(inode) && - EXT4_I(inode)->i_state & EXT4_STATE_JDATA); - if (EXT4_JOURNAL(inode) && EXT4_I(inode)->i_state & EXT4_STATE_JDATA) { /* * This is a REALLY heavyweight approach, but the use of -- cgit v1.2.1 From 7b24fc4d7eb611da367dea3aad45473050aacd6c Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Sun, 4 Jan 2009 02:43:38 -0500 Subject: block: Don't verify integrity metadata on read error If we get an I/O error on a read request there is no point in doing a verify pass on the integrity buffer. Adjust the completion path accordingly. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- fs/bio-integrity.c | 25 +++++++++++++++---------- include/linux/bio.h | 1 - 2 files changed, 15 insertions(+), 11 deletions(-) diff --git a/fs/bio-integrity.c b/fs/bio-integrity.c index 77ebc3c263d6..8396d741f804 100644 --- a/fs/bio-integrity.c +++ b/fs/bio-integrity.c @@ -465,7 +465,7 @@ static int bio_integrity_verify(struct bio *bio) if (ret) { kunmap_atomic(kaddr, KM_USER0); - break; + return ret; } sectors = bv->bv_len / bi->sector_size; @@ -493,18 +493,13 @@ static void bio_integrity_verify_fn(struct work_struct *work) struct bio_integrity_payload *bip = container_of(work, struct bio_integrity_payload, bip_work); struct bio *bio = bip->bip_bio; - int error = bip->bip_error; + int error; - if (bio_integrity_verify(bio)) { - clear_bit(BIO_UPTODATE, &bio->bi_flags); - error = -EIO; - } + error = bio_integrity_verify(bio); /* Restore original bio completion handler */ bio->bi_end_io = bip->bip_end_io; - - if (bio->bi_end_io) - bio->bi_end_io(bio, error); + bio_endio(bio, error); } /** @@ -525,7 +520,17 @@ void bio_integrity_endio(struct bio *bio, int error) BUG_ON(bip->bip_bio != bio); - bip->bip_error = error; + /* In case of an I/O error there is no point in verifying the + * integrity metadata. Restore original bio end_io handler + * and run it. + */ + if (error) { + bio->bi_end_io = bip->bip_end_io; + bio_endio(bio, error); + + return; + } + INIT_WORK(&bip->bip_work, bio_integrity_verify_fn); queue_work(kintegrityd_wq, &bip->bip_work); } diff --git a/include/linux/bio.h b/include/linux/bio.h index 18462c5b8fff..18fc4a281a7b 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -312,7 +312,6 @@ struct bio_integrity_payload { void *bip_buf; /* generated integrity data */ bio_end_io_t *bip_end_io; /* saved I/O completion fn */ - int bip_error; /* saved I/O error */ unsigned int bip_size; unsigned short bip_pool; /* pool the ivec came from */ -- cgit v1.2.1 From 8ae372e3bb4acaca37ffa2ce54f4cf8dd60a94fa Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Sun, 4 Jan 2009 02:43:39 -0500 Subject: block: Remove obsolete BUG_ON Now that bio_vecs are no longer cleared in bvec_alloc_bs() the following BUG_ON must go. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- fs/bio-integrity.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/bio-integrity.c b/fs/bio-integrity.c index 8396d741f804..549b0144da11 100644 --- a/fs/bio-integrity.c +++ b/fs/bio-integrity.c @@ -140,7 +140,6 @@ int bio_integrity_add_page(struct bio *bio, struct page *page, iv = bip_vec_idx(bip, bip->bip_vcnt); BUG_ON(iv == NULL); - BUG_ON(iv->bv_page != NULL); iv->bv_page = page; iv->bv_len = len; -- cgit v1.2.1 From 322316385dde5cd879e682bcb598c56d0659fb60 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Sun, 4 Jan 2009 02:43:40 -0500 Subject: block: Allow empty integrity profile Allow a block device to allocate and register an integrity profile without providing a template. This allows DM to preallocate a profile to avoid deadlocks during table reconfiguration. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- block/blk-integrity.c | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-) diff --git a/block/blk-integrity.c b/block/blk-integrity.c index 61a8e2f8fdd0..91fa8e06b6a5 100644 --- a/block/blk-integrity.c +++ b/block/blk-integrity.c @@ -309,24 +309,24 @@ static struct kobj_type integrity_ktype = { /** * blk_integrity_register - Register a gendisk as being integrity-capable * @disk: struct gendisk pointer to make integrity-aware - * @template: integrity profile + * @template: optional integrity profile to register * * Description: When a device needs to advertise itself as being able * to send/receive integrity metadata it must use this function to * register the capability with the block layer. The template is a * blk_integrity struct with values appropriate for the underlying - * hardware. See Documentation/block/data-integrity.txt. + * hardware. If template is NULL the new profile is allocated but + * not filled out. See Documentation/block/data-integrity.txt. */ int blk_integrity_register(struct gendisk *disk, struct blk_integrity *template) { struct blk_integrity *bi; BUG_ON(disk == NULL); - BUG_ON(template == NULL); if (disk->integrity == NULL) { bi = kmem_cache_alloc(integrity_cachep, - GFP_KERNEL | __GFP_ZERO); + GFP_KERNEL | __GFP_ZERO); if (!bi) return -1; @@ -346,13 +346,16 @@ int blk_integrity_register(struct gendisk *disk, struct blk_integrity *template) bi = disk->integrity; /* Use the provided profile as template */ - bi->name = template->name; - bi->generate_fn = template->generate_fn; - bi->verify_fn = template->verify_fn; - bi->tuple_size = template->tuple_size; - bi->set_tag_fn = template->set_tag_fn; - bi->get_tag_fn = template->get_tag_fn; - bi->tag_size = template->tag_size; + if (template != NULL) { + bi->name = template->name; + bi->generate_fn = template->generate_fn; + bi->verify_fn = template->verify_fn; + bi->tuple_size = template->tuple_size; + bi->set_tag_fn = template->set_tag_fn; + bi->get_tag_fn = template->get_tag_fn; + bi->tag_size = template->tag_size; + } else + bi->name = "unsupported"; return 0; } -- cgit v1.2.1 From f48fc4d32e24c0b6a18aad30305d819bcc68c049 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 5 Jan 2009 10:17:25 +0100 Subject: block: get rid of the manual directory counting in blktrace It can result in a stuck blktrace system, if --kill is used. Signed-off-by: Jens Axboe --- block/blktrace.c | 72 +++++++++++++++++--------------------------------------- 1 file changed, 21 insertions(+), 51 deletions(-) diff --git a/block/blktrace.c b/block/blktrace.c index b0a2cae886db..39cc3bfe56e4 100644 --- a/block/blktrace.c +++ b/block/blktrace.c @@ -187,59 +187,12 @@ static void __blk_add_trace(struct blk_trace *bt, sector_t sector, int bytes, static struct dentry *blk_tree_root; static DEFINE_MUTEX(blk_tree_mutex); -static unsigned int root_users; - -static inline void blk_remove_root(void) -{ - if (blk_tree_root) { - debugfs_remove(blk_tree_root); - blk_tree_root = NULL; - } -} - -static void blk_remove_tree(struct dentry *dir) -{ - mutex_lock(&blk_tree_mutex); - debugfs_remove(dir); - if (--root_users == 0) - blk_remove_root(); - mutex_unlock(&blk_tree_mutex); -} - -static struct dentry *blk_create_tree(const char *blk_name) -{ - struct dentry *dir = NULL; - int created = 0; - - mutex_lock(&blk_tree_mutex); - - if (!blk_tree_root) { - blk_tree_root = debugfs_create_dir("block", NULL); - if (!blk_tree_root) - goto err; - created = 1; - } - - dir = debugfs_create_dir(blk_name, blk_tree_root); - if (dir) - root_users++; - else { - /* Delete root only if we created it */ - if (created) - blk_remove_root(); - } - -err: - mutex_unlock(&blk_tree_mutex); - return dir; -} static void blk_trace_cleanup(struct blk_trace *bt) { - relay_close(bt->rchan); debugfs_remove(bt->msg_file); debugfs_remove(bt->dropped_file); - blk_remove_tree(bt->dir); + relay_close(bt->rchan); free_percpu(bt->sequence); free_percpu(bt->msg_data); kfree(bt); @@ -346,7 +299,18 @@ static int blk_subbuf_start_callback(struct rchan_buf *buf, void *subbuf, static int blk_remove_buf_file_callback(struct dentry *dentry) { + struct dentry *parent = dentry->d_parent; debugfs_remove(dentry); + + /* + * this will fail for all but the last file, but that is ok. what we + * care about is the top level buts->name directory going away, when + * the last trace file is gone. Then we don't have to rmdir() that + * manually on trace stop, so it nicely solves the issue with + * force killing of running traces. + */ + + debugfs_remove(parent); return 0; } @@ -404,7 +368,15 @@ int do_blk_trace_setup(struct request_queue *q, char *name, dev_t dev, goto err; ret = -ENOENT; - dir = blk_create_tree(buts->name); + + if (!blk_tree_root) { + blk_tree_root = debugfs_create_dir("block", NULL); + if (!blk_tree_root) + return -ENOMEM; + } + + dir = debugfs_create_dir(buts->name, blk_tree_root); + if (!dir) goto err; @@ -458,8 +430,6 @@ probe_err: atomic_dec(&blk_probes_ref); mutex_unlock(&blk_probe_mutex); err: - if (dir) - blk_remove_tree(dir); if (bt) { if (bt->msg_file) debugfs_remove(bt->msg_file); -- cgit v1.2.1 From 16642eb68216d8e0e136a99e514e9166e7125838 Mon Sep 17 00:00:00 2001 From: Alberto Bertogli Date: Mon, 5 Jan 2009 10:18:53 +0100 Subject: Fix small typo in bio.h's documentation Signed-off-by: Alberto Bertogli Signed-off-by: Jens Axboe --- include/linux/bio.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/bio.h b/include/linux/bio.h index 18fc4a281a7b..5175aa3103c6 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -144,7 +144,7 @@ struct bio { * bit 1 -- rw-ahead when set * bit 2 -- barrier * Insert a serialization point in the IO queue, forcing previously - * submitted IO to be completed before this oen is issued. + * submitted IO to be completed before this one is issued. * bit 3 -- synchronous I/O hint: the block layer will unplug immediately * Note that this does NOT indicate that the IO itself is sync, just * that the block layer will not postpone issue of this IO by plugging. -- cgit v1.2.1 From 1308835ffffe6d61ad1f48c5c381c9cc47f683ec Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 7 Jan 2009 12:22:39 +0100 Subject: block: export SSD/non-rotational queue flag through sysfs For some devices (i.e. CFA ATA) we can't reliably detect whether the device is of rotational or non-rotational type so we need to leave the final decision about this setting to the user-space. As a bonus do a minor CodingStyle fixup in queue_nomerges_store(). Suggested-by: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Jens Axboe --- block/blk-sysfs.c | 30 +++++++++++++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-) diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index a29cb788e408..b538ab8dbbd1 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -130,6 +130,27 @@ static ssize_t queue_max_hw_sectors_show(struct request_queue *q, char *page) return queue_var_show(max_hw_sectors_kb, (page)); } +static ssize_t queue_nonrot_show(struct request_queue *q, char *page) +{ + return queue_var_show(!blk_queue_nonrot(q), page); +} + +static ssize_t queue_nonrot_store(struct request_queue *q, const char *page, + size_t count) +{ + unsigned long nm; + ssize_t ret = queue_var_store(&nm, page, count); + + spin_lock_irq(q->queue_lock); + if (nm) + queue_flag_clear(QUEUE_FLAG_NONROT, q); + else + queue_flag_set(QUEUE_FLAG_NONROT, q); + spin_unlock_irq(q->queue_lock); + + return ret; +} + static ssize_t queue_nomerges_show(struct request_queue *q, char *page) { return queue_var_show(blk_queue_nomerges(q), page); @@ -146,8 +167,8 @@ static ssize_t queue_nomerges_store(struct request_queue *q, const char *page, queue_flag_set(QUEUE_FLAG_NOMERGES, q); else queue_flag_clear(QUEUE_FLAG_NOMERGES, q); - spin_unlock_irq(q->queue_lock); + return ret; } @@ -210,6 +231,12 @@ static struct queue_sysfs_entry queue_hw_sector_size_entry = { .show = queue_hw_sector_size_show, }; +static struct queue_sysfs_entry queue_nonrot_entry = { + .attr = {.name = "rotational", .mode = S_IRUGO | S_IWUSR }, + .show = queue_nonrot_show, + .store = queue_nonrot_store, +}; + static struct queue_sysfs_entry queue_nomerges_entry = { .attr = {.name = "nomerges", .mode = S_IRUGO | S_IWUSR }, .show = queue_nomerges_show, @@ -229,6 +256,7 @@ static struct attribute *default_attrs[] = { &queue_max_sectors_entry.attr, &queue_iosched_entry.attr, &queue_hw_sector_size_entry.attr, + &queue_nonrot_entry.attr, &queue_nomerges_entry.attr, &queue_rq_affinity_entry.attr, NULL, -- cgit v1.2.1 From 213d9417fec62ef4c3675621b9364a667954d4dd Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 6 Jan 2009 09:16:05 +0100 Subject: block: seperate bio/request unplug and sync bits Signed-off-by: Jens Axboe --- block/blk-core.c | 5 ++++- include/linux/bio.h | 18 +++++++++++------- include/linux/blkdev.h | 2 ++ 3 files changed, 17 insertions(+), 8 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index a824e49c0d0a..9e2e86fb78b8 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1125,6 +1125,8 @@ void init_request_from_bio(struct request *req, struct bio *bio) if (bio_sync(bio)) req->cmd_flags |= REQ_RW_SYNC; + if (bio_unplug(bio)) + req->cmd_flags |= REQ_UNPLUG; if (bio_rw_meta(bio)) req->cmd_flags |= REQ_RW_META; @@ -1141,6 +1143,7 @@ static int __make_request(struct request_queue *q, struct bio *bio) int el_ret, nr_sectors; const unsigned short prio = bio_prio(bio); const int sync = bio_sync(bio); + const int unplug = bio_unplug(bio); int rw_flags; nr_sectors = bio_sectors(bio); @@ -1244,7 +1247,7 @@ get_rq: blk_plug_device(q); add_request(q, req); out: - if (sync || blk_queue_nonrot(q)) + if (unplug || blk_queue_nonrot(q)) __generic_unplug_device(q); spin_unlock_irq(q->queue_lock); return 0; diff --git a/include/linux/bio.h b/include/linux/bio.h index 5175aa3103c6..f53568c5852e 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -163,12 +163,15 @@ struct bio { #define BIO_RW 0 /* Must match RW in req flags (blkdev.h) */ #define BIO_RW_AHEAD 1 /* Must match FAILFAST in req flags */ #define BIO_RW_BARRIER 2 -#define BIO_RW_SYNC 3 -#define BIO_RW_META 4 -#define BIO_RW_DISCARD 5 -#define BIO_RW_FAILFAST_DEV 6 -#define BIO_RW_FAILFAST_TRANSPORT 7 -#define BIO_RW_FAILFAST_DRIVER 8 +#define BIO_RW_SYNCIO 3 +#define BIO_RW_UNPLUG 4 +#define BIO_RW_META 5 +#define BIO_RW_DISCARD 6 +#define BIO_RW_FAILFAST_DEV 7 +#define BIO_RW_FAILFAST_TRANSPORT 8 +#define BIO_RW_FAILFAST_DRIVER 9 + +#define BIO_RW_SYNC (BIO_RW_SYNCIO | BIO_RW_UNPLUG) /* * upper 16 bits of bi_rw define the io priority of this bio @@ -194,7 +197,8 @@ struct bio { #define bio_segments(bio) ((bio)->bi_vcnt - (bio)->bi_idx) #define bio_sectors(bio) ((bio)->bi_size >> 9) #define bio_barrier(bio) ((bio)->bi_rw & (1 << BIO_RW_BARRIER)) -#define bio_sync(bio) ((bio)->bi_rw & (1 << BIO_RW_SYNC)) +#define bio_sync(bio) ((bio)->bi_rw & (1 << BIO_RW_SYNCIO)) +#define bio_unplug(bio) ((bio)->bi_rw & (1 << BIO_RW_UNPLUG)) #define bio_failfast_dev(bio) ((bio)->bi_rw & (1 << BIO_RW_FAILFAST_DEV)) #define bio_failfast_transport(bio) \ ((bio)->bi_rw & (1 << BIO_RW_FAILFAST_TRANSPORT)) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 044467ef7b11..75426e4b8cdf 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -108,6 +108,7 @@ enum rq_flag_bits { __REQ_RW_META, /* metadata io request */ __REQ_COPY_USER, /* contains copies of user pages */ __REQ_INTEGRITY, /* integrity metadata has been remapped */ + __REQ_UNPLUG, /* unplug queue on submission */ __REQ_NR_BITS, /* stops here */ }; @@ -134,6 +135,7 @@ enum rq_flag_bits { #define REQ_RW_META (1 << __REQ_RW_META) #define REQ_COPY_USER (1 << __REQ_COPY_USER) #define REQ_INTEGRITY (1 << __REQ_INTEGRITY) +#define REQ_UNPLUG (1 << __REQ_UNPLUG) #define BLK_MAX_CDB 16 -- cgit v1.2.1 From 1dfa17f4ab8543d82caf4d36636b93916a18f456 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 6 Jan 2009 09:21:49 +0100 Subject: block: add bio_rw_flagged() for testing bio->bi_rw The existing functions for checking bio->bi_rw are badly named. So lets mirror what we do for bio->bi_flags testing, use a properly named function so that it's immediately obvious what is being tested. Maintain compatability names for the old macros, eventually we'll get rid of these. Signed-off-by: Jens Axboe --- include/linux/bio.h | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/include/linux/bio.h b/include/linux/bio.h index f53568c5852e..0942765cf8c0 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -173,6 +173,24 @@ struct bio { #define BIO_RW_SYNC (BIO_RW_SYNCIO | BIO_RW_UNPLUG) +#define bio_rw_flagged(bio, flag) ((bio)->bi_rw & (1 << (flag))) + +/* + * Old defines, these should eventually be replaced by direct usage of + * bio_rw_flagged() + */ +#define bio_barrier(bio) bio_rw_flagged(bio, BIO_RW_BARRIER) +#define bio_sync(bio) bio_rw_flagged(bio, BIO_RW_SYNCIO) +#define bio_unplug(bio) bio_rw_flagged(bio, BIO_RW_UNPLUG) +#define bio_failfast_dev(bio) bio_rw_flagged(bio, BIO_RW_FAILFAST_DEV) +#define bio_failfast_transport(bio) \ + bio_rw_flagged(bio, BIO_RW_FAILFAST_TRANSPORT) +#define bio_failfast_driver(bio) \ + bio_rw_flagged(bio, BIO_RW_FAILFAST_DRIVER) +#define bio_rw_ahead(bio) bio_rw_flagged(bio, BIO_RW_AHEAD) +#define bio_rw_meta(bio) bio_rw_flagged(bio, BIO_RW_META) +#define bio_discard(bio) bio_rw_flagged(bio, BIO_RW_DISCARD) + /* * upper 16 bits of bi_rw define the io priority of this bio */ @@ -196,16 +214,6 @@ struct bio { #define bio_offset(bio) bio_iovec((bio))->bv_offset #define bio_segments(bio) ((bio)->bi_vcnt - (bio)->bi_idx) #define bio_sectors(bio) ((bio)->bi_size >> 9) -#define bio_barrier(bio) ((bio)->bi_rw & (1 << BIO_RW_BARRIER)) -#define bio_sync(bio) ((bio)->bi_rw & (1 << BIO_RW_SYNCIO)) -#define bio_unplug(bio) ((bio)->bi_rw & (1 << BIO_RW_UNPLUG)) -#define bio_failfast_dev(bio) ((bio)->bi_rw & (1 << BIO_RW_FAILFAST_DEV)) -#define bio_failfast_transport(bio) \ - ((bio)->bi_rw & (1 << BIO_RW_FAILFAST_TRANSPORT)) -#define bio_failfast_driver(bio) ((bio)->bi_rw & (1 << BIO_RW_FAILFAST_DRIVER)) -#define bio_rw_ahead(bio) ((bio)->bi_rw & (1 << BIO_RW_AHEAD)) -#define bio_rw_meta(bio) ((bio)->bi_rw & (1 << BIO_RW_META)) -#define bio_discard(bio) ((bio)->bi_rw & (1 << BIO_RW_DISCARD)) #define bio_empty_barrier(bio) (bio_barrier(bio) && !bio_has_data(bio) && !bio_discard(bio)) static inline unsigned int bio_cur_sectors(struct bio *bio) -- cgit v1.2.1 From dbdac9b71dff5d27885f82eb2cfca310861fdf9e Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Tue, 13 Jan 2009 15:27:32 +0100 Subject: block: Fix documentation for blkdev_issue_flush() Signed-off-by: "Theodore Ts'o" Signed-off-by: Jens Axboe --- block/blk-barrier.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/blk-barrier.c b/block/blk-barrier.c index 8eba4e43bb0c..f7dae57e6cab 100644 --- a/block/blk-barrier.c +++ b/block/blk-barrier.c @@ -302,7 +302,7 @@ static void bio_end_empty_barrier(struct bio *bio, int err) * Description: * Issue a flush for the block device in question. Caller can supply * room for storing the error offset in case of a flush error, if they - * wish to. Caller must run wait_for_completion() on its own. + * wish to. */ int blkdev_issue_flush(struct block_device *bdev, sector_t *error_sector) { -- cgit v1.2.1 From cec0707e40ae25794b5a2de7b7f03c51961f80d9 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 13 Jan 2009 15:28:32 +0100 Subject: block: silently error an unsupported barrier bio This fixes a "regression" from 2.6.28, where the barrier probes that file systems may do would trigger additional end request warnings in dmesg. Signed-off-by: Jens Axboe --- block/blk-core.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/block/blk-core.c b/block/blk-core.c index 9e2e86fb78b8..ae75c047f45d 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1451,6 +1451,11 @@ static inline void __generic_make_request(struct bio *bio) err = -EOPNOTSUPP; goto end_io; } + if (bio_barrier(bio) && bio_has_data(bio) && + (q->next_ordered == QUEUE_ORDERED_NONE)) { + err = -EOPNOTSUPP; + goto end_io; + } ret = q->make_request_fn(q, bio); } while (ret); -- cgit v1.2.1 From a229fc61ef0ee3c30fd193beee0eeb87410227f1 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Mon, 19 Jan 2009 10:37:38 +0100 Subject: include/linux: Add bsg.h to the Kernel exported headers bsg.h in current form is perfectly suitable for user-mode consumption. It is needed together with scsi/sg.h for applications that want to interface with the bsg driver. Currently the few projects that use it would copy it over into the projects. But that is not acceptable for projects that need to provide source and devel packages for distros. This should also be submitted to stable 2.6.28 and 2.6.27 since bsg had a stable API since these Kernels and distro users will need the header for these kernels a swell Signed-off-by: Boaz Harrosh Acked-by: FUJITA Tomonori CC: stable@kernel.org Signed-off-by: Jens Axboe --- include/linux/Kbuild | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 12e9a2957caf..2124c063a7ef 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -41,6 +41,7 @@ header-y += baycom.h header-y += bfs_fs.h header-y += blkpg.h header-y += bpqether.h +header-y += bsg.h header-y += can.h header-y += cdk.h header-y += chio.h -- cgit v1.2.1 From 7598909e3ee2a08726276d6415b69dadb52d0d76 Mon Sep 17 00:00:00 2001 From: Nikanth Karthikesan Date: Tue, 27 Jan 2009 09:29:24 +0100 Subject: Mark mandatory elevator functions in the biodoc.txt biodoc.txt mentions that elevator functions marked with * are mandatory, but no function is marked with *. Mark the 3 functions which should be implemented by any io scheduler. Signed-off-by: Nikanth Karthikesan Signed-off-by: Jens Axboe --- Documentation/block/biodoc.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index 5d2480d33b43..ecad6ee75705 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -954,14 +954,14 @@ elevator_allow_merge_fn called whenever the block layer determines results in some sort of conflict internally, this hook allows it to do that. -elevator_dispatch_fn fills the dispatch queue with ready requests. +elevator_dispatch_fn* fills the dispatch queue with ready requests. I/O schedulers are free to postpone requests by not filling the dispatch queue unless @force is non-zero. Once dispatched, I/O schedulers are not allowed to manipulate the requests - they belong to generic dispatch queue. -elevator_add_req_fn called to add a new request into the scheduler +elevator_add_req_fn* called to add a new request into the scheduler elevator_queue_empty_fn returns true if the merge queue is empty. Drivers shouldn't use this, but rather check @@ -991,7 +991,7 @@ elevator_activate_req_fn Called when device driver first sees a request. elevator_deactivate_req_fn Called when device driver decides to delay a request by requeueing it. -elevator_init_fn +elevator_init_fn* elevator_exit_fn Allocate and free any elevator specific storage for a queue. -- cgit v1.2.1 From bc58ba9468d94d62c56ab9b47173583ec140b165 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 23 Jan 2009 10:54:44 +0100 Subject: block: add sysfs file for controlling io stats accounting This allows us to turn off disk stat accounting completely, for the cases where the 0.5-1% reduction in system time is important. Signed-off-by: Jens Axboe --- block/blk-core.c | 90 ++++++++++++++++++++++++++++++-------------------- block/blk-sysfs.c | 28 ++++++++++++++++ include/linux/blkdev.h | 6 ++++ 3 files changed, 88 insertions(+), 36 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index ae75c047f45d..ca69f3d94100 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -64,11 +64,12 @@ static struct workqueue_struct *kblockd_workqueue; static void drive_stat_acct(struct request *rq, int new_io) { + struct gendisk *disk = rq->rq_disk; struct hd_struct *part; int rw = rq_data_dir(rq); int cpu; - if (!blk_fs_request(rq) || !rq->rq_disk) + if (!blk_fs_request(rq) || !disk || !blk_queue_io_stat(disk->queue)) return; cpu = part_stat_lock(); @@ -599,8 +600,7 @@ blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id) q->request_fn = rfn; q->prep_rq_fn = NULL; q->unplug_fn = generic_unplug_device; - q->queue_flags = (1 << QUEUE_FLAG_CLUSTER | - 1 << QUEUE_FLAG_STACKABLE); + q->queue_flags = QUEUE_FLAG_DEFAULT; q->queue_lock = lock; blk_queue_segment_boundary(q, BLK_SEG_BOUNDARY_MASK); @@ -1663,6 +1663,55 @@ void blkdev_dequeue_request(struct request *req) } EXPORT_SYMBOL(blkdev_dequeue_request); +static void blk_account_io_completion(struct request *req, unsigned int bytes) +{ + struct gendisk *disk = req->rq_disk; + + if (!disk || !blk_queue_io_stat(disk->queue)) + return; + + if (blk_fs_request(req)) { + const int rw = rq_data_dir(req); + struct hd_struct *part; + int cpu; + + cpu = part_stat_lock(); + part = disk_map_sector_rcu(req->rq_disk, req->sector); + part_stat_add(cpu, part, sectors[rw], bytes >> 9); + part_stat_unlock(); + } +} + +static void blk_account_io_done(struct request *req) +{ + struct gendisk *disk = req->rq_disk; + + if (!disk || !blk_queue_io_stat(disk->queue)) + return; + + /* + * Account IO completion. bar_rq isn't accounted as a normal + * IO on queueing nor completion. Accounting the containing + * request is enough. + */ + if (blk_fs_request(req) && req != &req->q->bar_rq) { + unsigned long duration = jiffies - req->start_time; + const int rw = rq_data_dir(req); + struct hd_struct *part; + int cpu; + + cpu = part_stat_lock(); + part = disk_map_sector_rcu(disk, req->sector); + + part_stat_inc(cpu, part, ios[rw]); + part_stat_add(cpu, part, ticks[rw], duration); + part_round_stats(cpu, part); + part_dec_in_flight(part); + + part_stat_unlock(); + } +} + /** * __end_that_request_first - end I/O on a request * @req: the request being processed @@ -1698,16 +1747,7 @@ static int __end_that_request_first(struct request *req, int error, (unsigned long long)req->sector); } - if (blk_fs_request(req) && req->rq_disk) { - const int rw = rq_data_dir(req); - struct hd_struct *part; - int cpu; - - cpu = part_stat_lock(); - part = disk_map_sector_rcu(req->rq_disk, req->sector); - part_stat_add(cpu, part, sectors[rw], nr_bytes >> 9); - part_stat_unlock(); - } + blk_account_io_completion(req, nr_bytes); total_bytes = bio_nbytes = 0; while ((bio = req->bio) != NULL) { @@ -1787,8 +1827,6 @@ static int __end_that_request_first(struct request *req, int error, */ static void end_that_request_last(struct request *req, int error) { - struct gendisk *disk = req->rq_disk; - if (blk_rq_tagged(req)) blk_queue_end_tag(req->q, req); @@ -1800,27 +1838,7 @@ static void end_that_request_last(struct request *req, int error) blk_delete_timer(req); - /* - * Account IO completion. bar_rq isn't accounted as a normal - * IO on queueing nor completion. Accounting the containing - * request is enough. - */ - if (disk && blk_fs_request(req) && req != &req->q->bar_rq) { - unsigned long duration = jiffies - req->start_time; - const int rw = rq_data_dir(req); - struct hd_struct *part; - int cpu; - - cpu = part_stat_lock(); - part = disk_map_sector_rcu(disk, req->sector); - - part_stat_inc(cpu, part, ios[rw]); - part_stat_add(cpu, part, ticks[rw], duration); - part_round_stats(cpu, part); - part_dec_in_flight(part); - - part_stat_unlock(); - } + blk_account_io_done(req); if (req->end_io) req->end_io(req, error); diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index b538ab8dbbd1..e29ddfc73cf4 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -197,6 +197,27 @@ queue_rq_affinity_store(struct request_queue *q, const char *page, size_t count) return ret; } +static ssize_t queue_iostats_show(struct request_queue *q, char *page) +{ + return queue_var_show(blk_queue_io_stat(q), page); +} + +static ssize_t queue_iostats_store(struct request_queue *q, const char *page, + size_t count) +{ + unsigned long stats; + ssize_t ret = queue_var_store(&stats, page, count); + + spin_lock_irq(q->queue_lock); + if (stats) + queue_flag_set(QUEUE_FLAG_IO_STAT, q); + else + queue_flag_clear(QUEUE_FLAG_IO_STAT, q); + spin_unlock_irq(q->queue_lock); + + return ret; +} + static struct queue_sysfs_entry queue_requests_entry = { .attr = {.name = "nr_requests", .mode = S_IRUGO | S_IWUSR }, .show = queue_requests_show, @@ -249,6 +270,12 @@ static struct queue_sysfs_entry queue_rq_affinity_entry = { .store = queue_rq_affinity_store, }; +static struct queue_sysfs_entry queue_iostats_entry = { + .attr = {.name = "iostats", .mode = S_IRUGO | S_IWUSR }, + .show = queue_iostats_show, + .store = queue_iostats_store, +}; + static struct attribute *default_attrs[] = { &queue_requests_entry.attr, &queue_ra_entry.attr, @@ -259,6 +286,7 @@ static struct attribute *default_attrs[] = { &queue_nonrot_entry.attr, &queue_nomerges_entry.attr, &queue_rq_affinity_entry.attr, + &queue_iostats_entry.attr, NULL, }; diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 75426e4b8cdf..d08c4b8219a6 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -451,6 +451,11 @@ struct request_queue #define QUEUE_FLAG_STACKABLE 13 /* supports request stacking */ #define QUEUE_FLAG_NONROT 14 /* non-rotational device (SSD) */ #define QUEUE_FLAG_VIRT QUEUE_FLAG_NONROT /* paravirt device */ +#define QUEUE_FLAG_IO_STAT 15 /* do IO stats */ + +#define QUEUE_FLAG_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \ + (1 << QUEUE_FLAG_CLUSTER) | \ + 1 << QUEUE_FLAG_STACKABLE) static inline int queue_is_locked(struct request_queue *q) { @@ -567,6 +572,7 @@ enum { #define blk_queue_stopped(q) test_bit(QUEUE_FLAG_STOPPED, &(q)->queue_flags) #define blk_queue_nomerges(q) test_bit(QUEUE_FLAG_NOMERGES, &(q)->queue_flags) #define blk_queue_nonrot(q) test_bit(QUEUE_FLAG_NONROT, &(q)->queue_flags) +#define blk_queue_io_stat(q) test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags) #define blk_queue_flushing(q) ((q)->ordseq) #define blk_queue_stackable(q) \ test_bit(QUEUE_FLAG_STACKABLE, &(q)->queue_flags) -- cgit v1.2.1 From 3a9a3f6cc55418dd1525e636dccbbe13c394f652 Mon Sep 17 00:00:00 2001 From: Divyesh Shah Date: Fri, 30 Jan 2009 12:46:41 +0100 Subject: cfq-iosched: Allow RT requests to pre-empt ongoing BE timeslice This patch adds the ability to pre-empt an ongoing BE timeslice when a RT request is waiting for the current timeslice to complete. This reduces the wait time to disk for RT requests from an upper bound of 4 (current value of cfq_quantum) to 1 disk request. Applied Jens' suggeested changes to avoid the rb lookup and use !cfq_class_rt() and retested. Latency(secs) for the RT task when doing sequential reads from 10G file. | only RT | RT + BE | RT + BE + this patch small (512 byte) reads | 143 | 163 | 145 large (1Mb) reads | 142 | 158 | 146 Signed-off-by: Divyesh Shah Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 39 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 38 insertions(+), 1 deletion(-) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index e8525fa72823..664ebfd092ec 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -84,6 +84,11 @@ struct cfq_data { */ struct cfq_rb_root service_tree; unsigned int busy_queues; + /* + * Used to track any pending rt requests so we can pre-empt current + * non-RT cfqq in service when this value is non-zero. + */ + unsigned int busy_rt_queues; int rq_in_driver; int sync_flight; @@ -562,6 +567,8 @@ static void cfq_add_cfqq_rr(struct cfq_data *cfqd, struct cfq_queue *cfqq) BUG_ON(cfq_cfqq_on_rr(cfqq)); cfq_mark_cfqq_on_rr(cfqq); cfqd->busy_queues++; + if (cfq_class_rt(cfqq)) + cfqd->busy_rt_queues++; cfq_resort_rr_list(cfqd, cfqq); } @@ -581,6 +588,8 @@ static void cfq_del_cfqq_rr(struct cfq_data *cfqd, struct cfq_queue *cfqq) BUG_ON(!cfqd->busy_queues); cfqd->busy_queues--; + if (cfq_class_rt(cfqq)) + cfqd->busy_rt_queues--; } /* @@ -1004,6 +1013,20 @@ static struct cfq_queue *cfq_select_queue(struct cfq_data *cfqd) if (cfq_slice_used(cfqq)) goto expire; + /* + * If we have a RT cfqq waiting, then we pre-empt the current non-rt + * cfqq. + */ + if (!cfq_class_rt(cfqq) && cfqd->busy_rt_queues) { + /* + * We simulate this as cfqq timed out so that it gets to bank + * the remaining of its time slice. + */ + cfq_log_cfqq(cfqd, cfqq, "preempt"); + cfq_slice_expired(cfqd, 1); + goto new_queue; + } + /* * The active queue has requests and isn't expired, allow it to * dispatch. @@ -1067,6 +1090,13 @@ __cfq_dispatch_requests(struct cfq_data *cfqd, struct cfq_queue *cfqq, if (RB_EMPTY_ROOT(&cfqq->sort_list)) break; + /* + * If there is a non-empty RT cfqq waiting for current + * cfqq's timeslice to complete, pre-empt this cfqq + */ + if (!cfq_class_rt(cfqq) && cfqd->busy_rt_queues) + break; + } while (dispatched < max_dispatch); /* @@ -1801,6 +1831,12 @@ cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq, if (rq_is_meta(rq) && !cfqq->meta_pending) return 1; + /* + * Allow an RT request to pre-empt an ongoing non-RT cfqq timeslice. + */ + if (cfq_class_rt(new_cfqq) && !cfq_class_rt(cfqq)) + return 1; + if (!cfqd->active_cic || !cfq_cfqq_wait_request(cfqq)) return 0; @@ -1870,7 +1906,8 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq, /* * not the active queue - expire current slice if it is * idle and has expired it's mean thinktime or this new queue - * has some old slice time left and is of higher priority + * has some old slice time left and is of higher priority or + * this new queue is RT and the current one is BE */ cfq_preempt_queue(cfqd, cfqq); cfq_mark_cfqq_must_dispatch(cfqq); -- cgit v1.2.1 From 9d6aa4c7ece26652fcbfe37bd45679eac5f69347 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 19:50:25 +0530 Subject: headers_check fix: can/bcm.h fix the following 'make headers_check' warning: usr/include/linux/can/bcm.h:29: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/can/bcm.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/can/bcm.h b/include/linux/can/bcm.h index 7f293273c444..1432b278c52d 100644 --- a/include/linux/can/bcm.h +++ b/include/linux/can/bcm.h @@ -14,6 +14,8 @@ #ifndef CAN_BCM_H #define CAN_BCM_H +#include + /** * struct bcm_msg_head - head of messages to/from the broadcast manager * @opcode: opcode, see enum below. -- cgit v1.2.1 From 15cf98ad2965aaefaa2f85332535ff39e48f9f4e Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 19:53:38 +0530 Subject: headers_check fix: dvb/audio.h fix the following 'make headers_check' warning: usr/include/linux/dvb/audio.h:133: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/dvb/audio.h | 5 ----- 1 file changed, 5 deletions(-) diff --git a/include/linux/dvb/audio.h b/include/linux/dvb/audio.h index 89412e18f571..bb0df2aaebfa 100644 --- a/include/linux/dvb/audio.h +++ b/include/linux/dvb/audio.h @@ -24,12 +24,7 @@ #ifndef _DVBAUDIO_H_ #define _DVBAUDIO_H_ -#ifdef __KERNEL__ #include -#else -#include -#endif - typedef enum { AUDIO_SOURCE_DEMUX, /* Select the demux as the main source */ -- cgit v1.2.1 From c86629c855800071314810881d1d2fb226ca9ec9 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 19:55:32 +0530 Subject: headers_check fix: dvb/dmx.h fix the following 'make headers_check' warnings: usr/include/linux/dvb/dmx.h:27: include of is preferred over usr/include/linux/dvb/dmx.h:90: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/dvb/dmx.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/dvb/dmx.h b/include/linux/dvb/dmx.h index 402fb7a8d922..fef943738a24 100644 --- a/include/linux/dvb/dmx.h +++ b/include/linux/dvb/dmx.h @@ -24,7 +24,7 @@ #ifndef _DVBDMX_H_ #define _DVBDMX_H_ -#include +#include #ifdef __KERNEL__ #include #else -- cgit v1.2.1 From de189f078ee4ae74944e6827dff184a3ef1fc89b Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 19:56:41 +0530 Subject: headers_check fix: dvb/frontend.h fix the following 'make headers_check' warnings: usr/include/linux/dvb/frontend.h:29: include of is preferred over usr/include/linux/dvb/frontend.h:76: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/dvb/frontend.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index 55026b1a40bd..51c8d2d49e42 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -26,8 +26,7 @@ #ifndef _DVBFRONTEND_H_ #define _DVBFRONTEND_H_ -#include - +#include typedef enum fe_type { FE_QPSK, -- cgit v1.2.1 From 8996be9de98a9362a3192b866dd8ab9930e28ad9 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 19:58:00 +0530 Subject: headers_check fix: dvb/net.h fix the following 'make headers_check' warnings: usr/include/linux/dvb/net.h:27: include of is preferred over usr/include/linux/dvb/net.h:31: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/dvb/net.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/include/linux/dvb/net.h b/include/linux/dvb/net.h index 5be474bf0d2b..f451e7eb0b0b 100644 --- a/include/linux/dvb/net.h +++ b/include/linux/dvb/net.h @@ -24,8 +24,7 @@ #ifndef _DVBNET_H_ #define _DVBNET_H_ -#include - +#include struct dvb_net_if { __u16 pid; -- cgit v1.2.1 From b852d36b86902abb272b0f2dd7a56dd2d17ea88c Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 19:59:53 +0530 Subject: headers_check fix: dvb/video.h fix the following 'make headers_check' warnings: usr/include/linux/dvb/video.h:29: include of is preferred over usr/include/linux/dvb/video.h:102: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/dvb/video.h | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/include/linux/dvb/video.h b/include/linux/dvb/video.h index 50839fe9e39e..bd49c3ebf916 100644 --- a/include/linux/dvb/video.h +++ b/include/linux/dvb/video.h @@ -24,17 +24,14 @@ #ifndef _DVBVIDEO_H_ #define _DVBVIDEO_H_ -#include - -#ifdef __KERNEL__ #include +#ifdef __KERNEL__ +#include #else -#include #include #include #endif - typedef enum { VIDEO_FORMAT_4_3, /* Select 4:3 format */ VIDEO_FORMAT_16_9, /* Select 16:9 format. */ -- cgit v1.2.1 From 9df27bab62e60d1f786abd0599af4a5e3192a784 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 20:00:47 +0530 Subject: headers_check fix: netfilter/xt_conntrack.h fix the following 'make headers_check' warning: usr/include/linux/netfilter/xt_conntrack.h:40: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/netfilter/xt_conntrack.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/netfilter/xt_conntrack.h b/include/linux/netfilter/xt_conntrack.h index f3fd83e46bab..8f5345275393 100644 --- a/include/linux/netfilter/xt_conntrack.h +++ b/include/linux/netfilter/xt_conntrack.h @@ -5,6 +5,7 @@ #ifndef _XT_CONNTRACK_H #define _XT_CONNTRACK_H +#include #include #define XT_CONNTRACK_STATE_BIT(ctinfo) (1 << ((ctinfo)%IP_CT_IS_REPLY+1)) -- cgit v1.2.1 From 3187cedf158687432cdf152eeee205f7b149f4ef Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 20:03:06 +0530 Subject: headers_check fix: nfsd/export.h fix the following 'make headers_check' warning: usr/include/linux/nfsd/export.h:13: include of is preferred over Signed-off-by: Jaswinder Singh Rajput --- include/linux/nfsd/export.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/include/linux/nfsd/export.h b/include/linux/nfsd/export.h index 5431512b2757..bcd0201589f8 100644 --- a/include/linux/nfsd/export.h +++ b/include/linux/nfsd/export.h @@ -10,9 +10,8 @@ #ifndef NFSD_EXPORT_H #define NFSD_EXPORT_H -#include -#ifdef __KERNEL__ # include +#ifdef __KERNEL__ # include #endif -- cgit v1.2.1 From 9e87b1e53f3c72c1196dc22cb359b5d6188a3729 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 20:04:03 +0530 Subject: headers_check fix: nfsd/nfsfh.h fix the following 'make headers_check' warnings: usr/include/linux/nfsd/nfsfh.h:17: include of is preferred over usr/include/linux/nfsd/nfsfh.h:28: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/nfsd/nfsfh.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/include/linux/nfsd/nfsfh.h b/include/linux/nfsd/nfsfh.h index b2e093870bc6..fa317f6c154b 100644 --- a/include/linux/nfsd/nfsfh.h +++ b/include/linux/nfsd/nfsfh.h @@ -14,9 +14,8 @@ #ifndef _LINUX_NFSD_FH_H #define _LINUX_NFSD_FH_H -#include -#ifdef __KERNEL__ # include +#ifdef __KERNEL__ # include # include #endif -- cgit v1.2.1 From 4ab0a9409af5fad74ad1fc9e46d5a8b460f353e9 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Sat, 10 Jan 2009 21:58:09 -0800 Subject: cpumask: convert lib/smp_processor_id to new cpumask ops Impact: fix debug_smp_processor_id() for CONFIG_CPUMASK_OFFSTACK=y The scheduler now uses the new cpumask API, which deals up to nr_cpumask_bits, whereas the API used NR_CPUS bits. If CONFIG_CPUMASK_OFFSTACK=y these two are not equal, so the top bits are undefined. Leading to bug 12518 "BUG: using smp_processor_id() in preemptible [00000000] code: dellWirelessCtl/..." The fix is simple: use the modern API in the check. Signed-off-by: Rusty Russell Signed-off-by: Mike Travis Signed-off-by: Ingo Molnar --- lib/smp_processor_id.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/smp_processor_id.c b/lib/smp_processor_id.c index 0f8fc22ed103..4689cb073da4 100644 --- a/lib/smp_processor_id.c +++ b/lib/smp_processor_id.c @@ -22,7 +22,7 @@ notrace unsigned int debug_smp_processor_id(void) * Kernel threads bound to a single CPU can safely use * smp_processor_id(): */ - if (cpus_equal(current->cpus_allowed, cpumask_of_cpu(this_cpu))) + if (cpumask_equal(¤t->cpus_allowed, cpumask_of(this_cpu))) goto out; /* -- cgit v1.2.1 From 34df9f69a4e298e2e8b939d8a7cc0d55846ba544 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Fri, 30 Jan 2009 08:23:33 -0700 Subject: powerpc/5200: update device tree binding documentation This patch updates the mpc5200 binding documentation to match actual usage conventions, to remove incorrect information, and to remove topics which are more thoroughly described elsewhere. Signed-off-by: Grant Likely Reviewed-by: Wolfram Sang --- Documentation/powerpc/dts-bindings/fsl/mpc5200.txt | 180 +++++++++++++ .../powerpc/mpc52xx-device-tree-bindings.txt | 277 --------------------- 2 files changed, 180 insertions(+), 277 deletions(-) create mode 100644 Documentation/powerpc/dts-bindings/fsl/mpc5200.txt delete mode 100644 Documentation/powerpc/mpc52xx-device-tree-bindings.txt diff --git a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt new file mode 100644 index 000000000000..8447fd7090d0 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt @@ -0,0 +1,180 @@ +MPC5200 Device Tree Bindings +---------------------------- + +(c) 2006-2009 Secret Lab Technologies Ltd +Grant Likely + +Naming conventions +------------------ +For mpc5200 on-chip devices, the format for each compatible value is +-[-]. The OS should be able to match a device driver +to the device based solely on the compatible value. If two drivers +match on the compatible list; the 'most compatible' driver should be +selected. + +The split between the MPC5200 and the MPC5200B leaves a bit of a +conundrum. How should the compatible property be set up to provide +maximum compatibility information; but still accurately describe the +chip? For the MPC5200; the answer is easy. Most of the SoC devices +originally appeared on the MPC5200. Since they didn't exist anywhere +else; the 5200 compatible properties will contain only one item; +"fsl,mpc5200-". + +The 5200B is almost the same as the 5200, but not quite. It fixes +silicon bugs and it adds a small number of enhancements. Most of the +devices either provide exactly the same interface as on the 5200. A few +devices have extra functions but still have a backwards compatible mode. +To express this information as completely as possible, 5200B device trees +should have two items in the compatible list: + compatible = "fsl,mpc5200b-","fsl,mpc5200-"; + +It is *strongly* recommended that 5200B device trees follow this convention +(instead of only listing the base mpc5200 item). + +ie. ethernet on mpc5200: compatible = "fsl,mpc5200-fec"; + ethernet on mpc5200b: compatible = "fsl,mpc5200b-fec", "fsl,mpc5200-fec"; + +Modal devices, like PSCs, also append the configured function to the +end of the compatible field. ie. A PSC in i2s mode would specify +"fsl,mpc5200-psc-i2s", not "fsl,mpc5200-i2s". This convention is chosen to +avoid naming conflicts with non-psc devices providing the same +function. For example, "fsl,mpc5200-spi" and "fsl,mpc5200-psc-spi" describe +the mpc5200 simple spi device and a PSC spi mode respectively. + +At the time of writing, exact chip may be either 'fsl,mpc5200' or +'fsl,mpc5200b'. + +The soc node +------------ +This node describes the on chip SOC peripherals. Every mpc5200 based +board will have this node, and as such there is a common naming +convention for SOC devices. + +Required properties: +name description +---- ----------- +ranges Memory range of the internal memory mapped registers. + Should be <0 [baseaddr] 0xc000> +reg Should be <[baseaddr] 0x100> +compatible mpc5200: "fsl,mpc5200-immr" + mpc5200b: "fsl,mpc5200b-immr" +system-frequency 'fsystem' frequency in Hz; XLB, IPB, USB and PCI + clocks are derived from the fsystem clock. +bus-frequency IPB bus frequency in Hz. Clock rate + used by most of the soc devices. + +soc child nodes +--------------- +Any on chip SOC devices available to Linux must appear as soc5200 child nodes. + +Note: The tables below show the value for the mpc5200. A mpc5200b device +tree should use the "fsl,mpc5200b-","fsl,mpc5200-" form. + +Required soc5200 child nodes: +name compatible Description +---- ---------- ----------- +cdm@ fsl,mpc5200-cdm Clock Distribution +interrupt-controller@ fsl,mpc5200-pic need an interrupt + controller to boot +bestcomm@ fsl,mpc5200-bestcomm Bestcomm DMA controller + +Recommended soc5200 child nodes; populate as needed for your board +name compatible Description +---- ---------- ----------- +timer@ fsl,mpc5200-gpt General purpose timers +gpio@ fsl,mpc5200-gpio MPC5200 simple gpio controller +gpio@ fsl,mpc5200-gpio-wkup MPC5200 wakeup gpio controller +rtc@ fsl,mpc5200-rtc Real time clock +mscan@ fsl,mpc5200-mscan CAN bus controller +pci@ fsl,mpc5200-pci PCI bridge +serial@ fsl,mpc5200-psc-uart PSC in serial mode +i2s@ fsl,mpc5200-psc-i2s PSC in i2s mode +ac97@ fsl,mpc5200-psc-ac97 PSC in ac97 mode +spi@ fsl,mpc5200-psc-spi PSC in spi mode +irda@ fsl,mpc5200-psc-irda PSC in IrDA mode +spi@ fsl,mpc5200-spi MPC5200 spi device +ethernet@ fsl,mpc5200-fec MPC5200 ethernet device +ata@ fsl,mpc5200-ata IDE ATA interface +i2c@ fsl,mpc5200-i2c I2C controller +usb@ fsl,mpc5200-ohci,ohci-be USB controller +xlb@ fsl,mpc5200-xlb XLB arbitrator + +fsl,mpc5200-gpt nodes +--------------------- +On the mpc5200 and 5200b, GPT0 has a watchdog timer function. If the board +design supports the internal wdt, then the device node for GPT0 should +include the empty property 'fsl,has-wdt'. + +An mpc5200-gpt can be used as a single line GPIO controller. To do so, +add the following properties to the gpt node: + gpio-controller; + #gpio-cells = <2>; +When referencing the GPIO line from another node, the first cell must always +be zero and the second cell represents the gpio flags and described in the +gpio device tree binding. + +An mpc5200-gpt can be used as a single line edge sensitive interrupt +controller. To do so, add the following properties to the gpt node: + interrupt-controller; + #interrupt-cells = <1>; +When referencing the IRQ line from another node, the cell represents the +sense mode; 1 for edge rising, 2 for edge falling. + +fsl,mpc5200-psc nodes +--------------------- +The PSCs should include a cell-index which is the index of the PSC in +hardware. cell-index is used to determine which shared SoC registers to +use when setting up PSC clocking. cell-index number starts at '0'. ie: + PSC1 has 'cell-index = <0>' + PSC4 has 'cell-index = <3>' + +PSC in i2s mode: The mpc5200 and mpc5200b PSCs are not compatible when in +i2s mode. An 'mpc5200b-psc-i2s' node cannot include 'mpc5200-psc-i2s' in the +compatible field. + + +fsl,mpc5200-gpio and fsl,mpc5200-gpio-wkup nodes +------------------------------------------------ +Each GPIO controller node should have the empty property gpio-controller and +#gpio-cells set to 2. First cell is the GPIO number which is interpreted +according to the bit numbers in the GPIO control registers. The second cell +is for flags which is currently unused. + +fsl,mpc5200-fec nodes +--------------------- +The FEC node can specify one of the following properties to configure +the MII link: +- fsl,7-wire-mode - An empty property that specifies the link uses 7-wire + mode instead of MII +- current-speed - Specifies that the MII should be configured for a fixed + speed. This property should contain two cells. The + first cell specifies the speed in Mbps and the second + should be '0' for half duplex and '1' for full duplex +- phy-handle - Contains a phandle to an Ethernet PHY. + +Interrupt controller (fsl,mpc5200-pic) node +------------------------------------------- +The mpc5200 pic binding splits hardware IRQ numbers into two levels. The +split reflects the layout of the PIC hardware itself, which groups +interrupts into one of three groups; CRIT, MAIN or PERP. Also, the +Bestcomm dma engine has it's own set of interrupt sources which are +cascaded off of peripheral interrupt 0, which the driver interprets as a +fourth group, SDMA. + +The interrupts property for device nodes using the mpc5200 pic consists +of three cells; + + L1 := [CRIT=0, MAIN=1, PERP=2, SDMA=3] + L2 := interrupt number; directly mapped from the value in the + "ICTL PerStat, MainStat, CritStat Encoded Register" + level := [LEVEL_HIGH=0, EDGE_RISING=1, EDGE_FALLING=2, LEVEL_LOW=3] + +For external IRQs, use the following interrupt property values (how to +specify external interrupts is a frequently asked question): +External interrupts: + external irq0: interrupts = <0 0 n>; + external irq1: interrupts = <1 1 n>; + external irq2: interrupts = <1 2 n>; + external irq3: interrupts = <1 3 n>; +'n' is sense (0: level high, 1: edge rising, 2: edge falling 3: level low) + diff --git a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt b/Documentation/powerpc/mpc52xx-device-tree-bindings.txt deleted file mode 100644 index 6f12f1c79c0c..000000000000 --- a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt +++ /dev/null @@ -1,277 +0,0 @@ -MPC5200 Device Tree Bindings ----------------------------- - -(c) 2006-2007 Secret Lab Technologies Ltd -Grant Likely - -********** DRAFT *********** -* WARNING: Do not depend on the stability of these bindings just yet. -* The MPC5200 device tree conventions are still in flux -* Keep an eye on the linuxppc-dev mailing list for more details -********** DRAFT *********** - -I - Introduction -================ -Boards supported by the arch/powerpc architecture require device tree be -passed by the boot loader to the kernel at boot time. The device tree -describes what devices are present on the board and how they are -connected. The device tree can either be passed as a binary blob (as -described in Documentation/powerpc/booting-without-of.txt), or passed -by Open Firmware (IEEE 1275) compatible firmware using an OF compatible -client interface API. - -This document specifies the requirements on the device-tree for mpc5200 -based boards. These requirements are above and beyond the details -specified in either the Open Firmware spec or booting-without-of.txt - -All new mpc5200-based boards are expected to match this document. In -cases where this document is not sufficient to support a new board port, -this document should be updated as part of adding the new board support. - -II - Philosophy -=============== -The core of this document is naming convention. The whole point of -defining this convention is to reduce or eliminate the number of -special cases required to support a 5200 board. If all 5200 boards -follow the same convention, then generic 5200 support code will work -rather than coding special cases for each new board. - -This section tries to capture the thought process behind why the naming -convention is what it is. - -1. names ---------- -There is strong convention/requirements already established for children -of the root node. 'cpus' describes the processor cores, 'memory' -describes memory, and 'chosen' provides boot configuration. Other nodes -are added to describe devices attached to the processor local bus. - -Following convention already established with other system-on-chip -processors, 5200 device trees should use the name 'soc5200' for the -parent node of on chip devices, and the root node should be its parent. - -Child nodes are typically named after the configured function. ie. -the FEC node is named 'ethernet', and a PSC in uart mode is named 'serial'. - -2. device_type property ------------------------ -similar to the node name convention above; the device_type reflects the -configured function of a device. ie. 'serial' for a uart and 'spi' for -an spi controller. However, while node names *should* reflect the -configured function, device_type *must* match the configured function -exactly. - -3. compatible property ----------------------- -Since device_type isn't enough to match devices to drivers, there also -needs to be a naming convention for the compatible property. Compatible -is an list of device descriptions sorted from specific to generic. For -the mpc5200, the required format for each compatible value is --[-]. The OS should be able to match a device driver -to the device based solely on the compatible value. If two drivers -match on the compatible list; the 'most compatible' driver should be -selected. - -The split between the MPC5200 and the MPC5200B leaves a bit of a -conundrum. How should the compatible property be set up to provide -maximum compatibility information; but still accurately describe the -chip? For the MPC5200; the answer is easy. Most of the SoC devices -originally appeared on the MPC5200. Since they didn't exist anywhere -else; the 5200 compatible properties will contain only one item; -"mpc5200-". - -The 5200B is almost the same as the 5200, but not quite. It fixes -silicon bugs and it adds a small number of enhancements. Most of the -devices either provide exactly the same interface as on the 5200. A few -devices have extra functions but still have a backwards compatible mode. -To express this information as completely as possible, 5200B device trees -should have two items in the compatible list; -"mpc5200b-\0mpc5200-". It is *strongly* recommended -that 5200B device trees follow this convention (instead of only listing -the base mpc5200 item). - -If another chip appear on the market with one of the mpc5200 SoC -devices, then the compatible list should include mpc5200-. - -ie. ethernet on mpc5200: compatible = "mpc5200-ethernet" - ethernet on mpc5200b: compatible = "mpc5200b-ethernet\0mpc5200-ethernet" - -Modal devices, like PSCs, also append the configured function to the -end of the compatible field. ie. A PSC in i2s mode would specify -"mpc5200-psc-i2s", not "mpc5200-i2s". This convention is chosen to -avoid naming conflicts with non-psc devices providing the same -function. For example, "mpc5200-spi" and "mpc5200-psc-spi" describe -the mpc5200 simple spi device and a PSC spi mode respectively. - -If the soc device is more generic and present on other SOCs, the -compatible property can specify the more generic device type also. - -ie. mscan: compatible = "mpc5200-mscan\0fsl,mscan"; - -At the time of writing, exact chip may be either 'mpc5200' or -'mpc5200b'. - -Device drivers should always try to match as generically as possible. - -III - Structure -=============== -The device tree for an mpc5200 board follows the structure defined in -booting-without-of.txt with the following additional notes: - -0) the root node ----------------- -Typical root description node; see booting-without-of - -1) The cpus node ----------------- -The cpus node follows the basic layout described in booting-without-of. -The bus-frequency property holds the XLB bus frequency -The clock-frequency property holds the core frequency - -2) The memory node ------------------- -Typical memory description node; see booting-without-of. - -3) The soc5200 node -------------------- -This node describes the on chip SOC peripherals. Every mpc5200 based -board will have this node, and as such there is a common naming -convention for SOC devices. - -Required properties: -name type description ----- ---- ----------- -device_type string must be "soc" -ranges int should be <0 baseaddr baseaddr+10000> -reg int must be -compatible string mpc5200: "mpc5200-soc" - mpc5200b: "mpc5200b-soc\0mpc5200-soc" -system-frequency int Fsystem frequency; source of all - other clocks. -bus-frequency int IPB bus frequency in HZ. Clock rate - used by most of the soc devices. -#interrupt-cells int must be <3>. - -Recommended properties: -name type description ----- ---- ----------- -model string Exact model of the chip; - ie: model="fsl,mpc5200" -revision string Silicon revision of chip - ie: revision="M08A" - -The 'model' and 'revision' properties are *strongly* recommended. Having -them presence acts as a bit of a safety net for working around as yet -undiscovered bugs on one version of silicon. For example, device drivers -can use the model and revision properties to decide if a bug fix should -be turned on. - -4) soc5200 child nodes ----------------------- -Any on chip SOC devices available to Linux must appear as soc5200 child nodes. - -Note: The tables below show the value for the mpc5200. A mpc5200b device -tree should use the "mpc5200b-\0mpc5200- form. - -Required soc5200 child nodes: -name device_type compatible Description ----- ----------- ---------- ----------- -cdm@ cdm mpc5200-cmd Clock Distribution -pic@ interrupt-controller mpc5200-pic need an interrupt - controller to boot -bestcomm@ dma-controller mpc5200-bestcomm 5200 pic also requires - the bestcomm device - -Recommended soc5200 child nodes; populate as needed for your board -name device_type compatible Description ----- ----------- ---------- ----------- -gpt@ gpt fsl,mpc5200-gpt General purpose timers -gpt@ gpt fsl,mpc5200-gpt-gpio General purpose - timers in GPIO mode -gpio@ fsl,mpc5200-gpio MPC5200 simple gpio - controller -gpio@ fsl,mpc5200-gpio-wkup MPC5200 wakeup gpio - controller -rtc@ rtc mpc5200-rtc Real time clock -mscan@ mscan mpc5200-mscan CAN bus controller -pci@ pci mpc5200-pci PCI bridge -serial@ serial mpc5200-psc-uart PSC in serial mode -i2s@ sound mpc5200-psc-i2s PSC in i2s mode -ac97@ sound mpc5200-psc-ac97 PSC in ac97 mode -spi@ spi mpc5200-psc-spi PSC in spi mode -irda@ irda mpc5200-psc-irda PSC in IrDA mode -spi@ spi mpc5200-spi MPC5200 spi device -ethernet@ network mpc5200-fec MPC5200 ethernet device -ata@ ata mpc5200-ata IDE ATA interface -i2c@ i2c mpc5200-i2c I2C controller -usb@ usb-ohci-be mpc5200-ohci,ohci-be USB controller -xlb@ xlb mpc5200-xlb XLB arbitrator - -Important child node properties -name type description ----- ---- ----------- -cell-index int When multiple devices are present, is the - index of the device in the hardware (ie. There - are 6 PSC on the 5200 numbered PSC1 to PSC6) - PSC1 has 'cell-index = <0>' - PSC4 has 'cell-index = <3>' - -5) General Purpose Timer nodes (child of soc5200 node) -On the mpc5200 and 5200b, GPT0 has a watchdog timer function. If the board -design supports the internal wdt, then the device node for GPT0 should -include the empty property 'fsl,has-wdt'. - -6) PSC nodes (child of soc5200 node) -PSC nodes can define the optional 'port-number' property to force assignment -order of serial ports. For example, PSC5 might be physically connected to -the port labeled 'COM1' and PSC1 wired to 'COM1'. In this case, PSC5 would -have a "port-number = <0>" property, and PSC1 would have "port-number = <1>". - -PSC in i2s mode: The mpc5200 and mpc5200b PSCs are not compatible when in -i2s mode. An 'mpc5200b-psc-i2s' node cannot include 'mpc5200-psc-i2s' in the -compatible field. - -7) GPIO controller nodes -Each GPIO controller node should have the empty property gpio-controller and -#gpio-cells set to 2. First cell is the GPIO number which is interpreted -according to the bit numbers in the GPIO control registers. The second cell -is for flags which is currently unsused. - -8) FEC nodes -The FEC node can specify one of the following properties to configure -the MII link: -"fsl,7-wire-mode" - An empty property that specifies the link uses 7-wire - mode instead of MII -"current-speed" - Specifies that the MII should be configured for a fixed - speed. This property should contain two cells. The - first cell specifies the speed in Mbps and the second - should be '0' for half duplex and '1' for full duplex -"phy-handle" - Contains a phandle to an Ethernet PHY. - -IV - Extra Notes -================ - -1. Interrupt mapping --------------------- -The mpc5200 pic driver splits hardware IRQ numbers into two levels. The -split reflects the layout of the PIC hardware itself, which groups -interrupts into one of three groups; CRIT, MAIN or PERP. Also, the -Bestcomm dma engine has it's own set of interrupt sources which are -cascaded off of peripheral interrupt 0, which the driver interprets as a -fourth group, SDMA. - -The interrupts property for device nodes using the mpc5200 pic consists -of three cells; - - L1 := [CRIT=0, MAIN=1, PERP=2, SDMA=3] - L2 := interrupt number; directly mapped from the value in the - "ICTL PerStat, MainStat, CritStat Encoded Register" - level := [LEVEL_HIGH=0, EDGE_RISING=1, EDGE_FALLING=2, LEVEL_LOW=3] - -2. Shared registers -------------------- -Some SoC devices share registers between them. ie. the i2c devices use -a single clock control register, and almost all device are affected by -the port_config register. Devices which need to manipulate shared regs -should look to the parent SoC node. The soc node is responsible -for arbitrating all shared register access. -- cgit v1.2.1 From 0461ec5bc7745b89a8ab67ba0ea497abd58a6301 Mon Sep 17 00:00:00 2001 From: Paul Larson Date: Fri, 30 Jan 2009 10:21:49 -0600 Subject: Add enable_ms to jsm driver This fixes a crash observed when non-existant enable_ms function is called for jsm driver. Signed-off-by: Scott Kilau Signed-off-by: Paul Larson Signed-off-by: Linus Torvalds --- drivers/serial/jsm/jsm_tty.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c index 3547558d2caf..324c74d2f666 100644 --- a/drivers/serial/jsm/jsm_tty.c +++ b/drivers/serial/jsm/jsm_tty.c @@ -161,6 +161,11 @@ static void jsm_tty_stop_rx(struct uart_port *port) channel->ch_bd->bd_ops->disable_receiver(channel); } +static void jsm_tty_enable_ms(struct uart_port *port) +{ + /* Nothing needed */ +} + static void jsm_tty_break(struct uart_port *port, int break_state) { unsigned long lock_flags; @@ -345,6 +350,7 @@ static struct uart_ops jsm_ops = { .start_tx = jsm_tty_start_tx, .send_xchar = jsm_tty_send_xchar, .stop_rx = jsm_tty_stop_rx, + .enable_ms = jsm_tty_enable_ms, .break_ctl = jsm_tty_break, .startup = jsm_tty_open, .shutdown = jsm_tty_close, -- cgit v1.2.1 From d7240b988017521ebf89edfadd42c0942f166850 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 29 Jan 2009 10:08:01 -0500 Subject: generic-ipi: use per cpu data for single cpu ipi calls The smp_call_function can be passed a wait parameter telling it to wait for all the functions running on other CPUs to complete before returning, or to return without waiting. Unfortunately, this is currently just a suggestion and not manditory. That is, the smp_call_function can decide not to return and wait instead. The reason for this is because it uses kmalloc to allocate storage to send to the called CPU and that CPU will free it when it is done. But if we fail to allocate the storage, the stack is used instead. This means we must wait for the called CPU to finish before continuing. Unfortunatly, some callers do no abide by this hint and act as if the non-wait option is mandatory. The MTRR code for instance will deadlock if the smp_call_function is set to wait. This is because the smp_call_function will wait for the other CPUs to finish their called functions, but those functions are waiting on the caller to continue. This patch changes the generic smp_call_function code to use per cpu variables if the allocation of the data fails for a single CPU call. The smp_call_function_many will fall back to the smp_call_function_single if it fails its alloc. The smp_call_function_single is modified to not force the wait state. Since we now are using a single data per cpu we must synchronize the callers to prevent a second caller modifying the data before the first called IPI functions complete. To do so, I added a flag to the call_single_data called CSD_FLAG_LOCK. When the single CPU is called (which can be called when a many call fails an alloc), we set the LOCK bit on this per cpu data. When the caller finishes it clears the LOCK bit. The caller must wait till the LOCK bit is cleared before setting it. When it is cleared, there is no IPI function using it. Signed-off-by: Steven Rostedt Signed-off-by: Peter Zijlstra Acked-by: Jens Axboe Acked-by: Linus Torvalds Signed-off-by: Ingo Molnar --- kernel/smp.c | 36 +++++++++++++++++++++++++++++++++--- 1 file changed, 33 insertions(+), 3 deletions(-) diff --git a/kernel/smp.c b/kernel/smp.c index 5cfa0e5e3e88..bbedbb7efe32 100644 --- a/kernel/smp.c +++ b/kernel/smp.c @@ -18,6 +18,7 @@ __cacheline_aligned_in_smp DEFINE_SPINLOCK(call_function_lock); enum { CSD_FLAG_WAIT = 0x01, CSD_FLAG_ALLOC = 0x02, + CSD_FLAG_LOCK = 0x04, }; struct call_function_data { @@ -186,6 +187,9 @@ void generic_smp_call_function_single_interrupt(void) if (data_flags & CSD_FLAG_WAIT) { smp_wmb(); data->flags &= ~CSD_FLAG_WAIT; + } else if (data_flags & CSD_FLAG_LOCK) { + smp_wmb(); + data->flags &= ~CSD_FLAG_LOCK; } else if (data_flags & CSD_FLAG_ALLOC) kfree(data); } @@ -196,6 +200,8 @@ void generic_smp_call_function_single_interrupt(void) } } +static DEFINE_PER_CPU(struct call_single_data, csd_data); + /* * smp_call_function_single - Run a function on a specific CPU * @func: The function to run. This must be fast and non-blocking. @@ -224,14 +230,38 @@ int smp_call_function_single(int cpu, void (*func) (void *info), void *info, func(info); local_irq_restore(flags); } else if ((unsigned)cpu < nr_cpu_ids && cpu_online(cpu)) { - struct call_single_data *data = NULL; + struct call_single_data *data; if (!wait) { + /* + * We are calling a function on a single CPU + * and we are not going to wait for it to finish. + * We first try to allocate the data, but if we + * fail, we fall back to use a per cpu data to pass + * the information to that CPU. Since all callers + * of this code will use the same data, we must + * synchronize the callers to prevent a new caller + * from corrupting the data before the callee + * can access it. + * + * The CSD_FLAG_LOCK is used to let us know when + * the IPI handler is done with the data. + * The first caller will set it, and the callee + * will clear it. The next caller must wait for + * it to clear before we set it again. This + * will make sure the callee is done with the + * data before a new caller will use it. + */ data = kmalloc(sizeof(*data), GFP_ATOMIC); if (data) data->flags = CSD_FLAG_ALLOC; - } - if (!data) { + else { + data = &per_cpu(csd_data, me); + while (data->flags & CSD_FLAG_LOCK) + cpu_relax(); + data->flags = CSD_FLAG_LOCK; + } + } else { data = &d; data->flags = CSD_FLAG_WAIT; } -- cgit v1.2.1 From 03cf1e0c3b4ee4ef51dc7eb197a4d098ad4873af Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 20:05:27 +0530 Subject: headers_check fix: nfsd/syscall.h fix the following 'make headers_check' warnings: usr/include/linux/nfsd/syscall.h:12: include of is preferred over usr/include/linux/nfsd/syscall.h:104: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/nfsd/syscall.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/include/linux/nfsd/syscall.h b/include/linux/nfsd/syscall.h index 4e439765b705..7a3b565b898f 100644 --- a/include/linux/nfsd/syscall.h +++ b/include/linux/nfsd/syscall.h @@ -9,9 +9,8 @@ #ifndef NFSD_SYSCALL_H #define NFSD_SYSCALL_H -#include -#ifdef __KERNEL__ # include +#ifdef __KERNEL__ # include #endif #include -- cgit v1.2.1 From bcf74582af3feca80ec96cc21d0a26c938d1863e Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 20:06:44 +0530 Subject: headers_check fix: raid/md_p.h fix the following 'make headers_check' warning: usr/include/linux/raid/md_p.h:85: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/raid/md_p.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/raid/md_p.h b/include/linux/raid/md_p.h index 9491026afe66..6ba830fa8538 100644 --- a/include/linux/raid/md_p.h +++ b/include/linux/raid/md_p.h @@ -15,6 +15,8 @@ #ifndef _MD_P_H #define _MD_P_H +#include + /* * RAID superblock. * -- cgit v1.2.1 From 550e978aa52e2ac3c493e8a0b36b368ade6dd2b4 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 20:07:35 +0530 Subject: headers_check fix: spi/spidev.h fix the following 'make headers_check' warning: usr/include/linux/spi/spidev.h:83: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/spi/spidev.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/spi/spidev.h b/include/linux/spi/spidev.h index c93ef9d42a01..95251ccd5a07 100644 --- a/include/linux/spi/spidev.h +++ b/include/linux/spi/spidev.h @@ -22,6 +22,7 @@ #ifndef SPIDEV_H #define SPIDEV_H +#include /* User space versions of kernel symbols for SPI clocking modes, * matching -- cgit v1.2.1 From 2d594c0c8aa46beb21be1c5c2b7141f89d206313 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 20:10:05 +0530 Subject: headers_check fix: tc_act/tc_gact.h fix the following 'make headers_check' warning: usr/include/linux/tc_act/tc_gact.h:19: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/tc_act/tc_gact.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/tc_act/tc_gact.h b/include/linux/tc_act/tc_gact.h index 23a03eb630db..e895c0a39629 100644 --- a/include/linux/tc_act/tc_gact.h +++ b/include/linux/tc_act/tc_gact.h @@ -1,6 +1,7 @@ #ifndef __LINUX_TC_GACT_H #define __LINUX_TC_GACT_H +#include #include #define TCA_ACT_GACT 5 -- cgit v1.2.1 From 9c536d275823b8a6281894f4f8c2687f60578253 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 20:10:44 +0530 Subject: headers_check fix: tc_act/tc_mirred.h fix the following 'make headers_check' warning: usr/include/linux/tc_act/tc_mirred.h:16: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/tc_act/tc_mirred.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/tc_act/tc_mirred.h b/include/linux/tc_act/tc_mirred.h index 71d63409d568..0a99ab60d610 100644 --- a/include/linux/tc_act/tc_mirred.h +++ b/include/linux/tc_act/tc_mirred.h @@ -1,6 +1,7 @@ #ifndef __LINUX_TC_MIR_H #define __LINUX_TC_MIR_H +#include #include #define TCA_ACT_MIRRED 8 -- cgit v1.2.1 From 5dbbf3bcae2f6b5dee1c33b3eeced00bcb6c4f71 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 20:11:22 +0530 Subject: headers_check fix: tc_act/tc_pedit.h fix the following 'make headers_check' warning: usr/include/linux/tc_act/tc_pedit.h:19: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/tc_act/tc_pedit.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/tc_act/tc_pedit.h b/include/linux/tc_act/tc_pedit.h index 83e56e32e8e0..54ce9064115a 100644 --- a/include/linux/tc_act/tc_pedit.h +++ b/include/linux/tc_act/tc_pedit.h @@ -1,6 +1,7 @@ #ifndef __LINUX_TC_PED_H #define __LINUX_TC_PED_H +#include #include #define TCA_ACT_PEDIT 7 -- cgit v1.2.1 From ba3a51e3b899c1bd34c18f84a1c6f7e5f99be850 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 20:12:01 +0530 Subject: headers_check fix: tc_ematch/tc_em_cmp.h fix the following 'make headers_check' warning: usr/include/linux/tc_ematch/tc_em_cmp.h:8: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/tc_ematch/tc_em_cmp.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/tc_ematch/tc_em_cmp.h b/include/linux/tc_ematch/tc_em_cmp.h index c7f4d43618fd..38e7f7b25ec2 100644 --- a/include/linux/tc_ematch/tc_em_cmp.h +++ b/include/linux/tc_ematch/tc_em_cmp.h @@ -1,6 +1,7 @@ #ifndef __LINUX_TC_EM_CMP_H #define __LINUX_TC_EM_CMP_H +#include #include struct tcf_em_cmp -- cgit v1.2.1 From 9976007a13e67b973f94c8d472ed615ac4cf8078 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 20:12:59 +0530 Subject: headers_check fix: tc_ematch/tc_em_meta.h fix the following 'make headers_check' warning: usr/include/linux/tc_ematch/tc_em_meta.h:18: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/tc_ematch/tc_em_meta.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/tc_ematch/tc_em_meta.h b/include/linux/tc_ematch/tc_em_meta.h index c50d2ba5caf0..dcfb733fa1f6 100644 --- a/include/linux/tc_ematch/tc_em_meta.h +++ b/include/linux/tc_ematch/tc_em_meta.h @@ -1,6 +1,7 @@ #ifndef __LINUX_TC_EM_META_H #define __LINUX_TC_EM_META_H +#include #include enum -- cgit v1.2.1 From ac836c6f1b17f674e35a7e2784541bb8ab0bce38 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 20:13:41 +0530 Subject: headers_check fix: tc_ematch/tc_em_nbyte.h fix the following 'make headers_check' warning: usr/include/linux/tc_ematch/tc_em_nbyte.h:8: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/tc_ematch/tc_em_nbyte.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/tc_ematch/tc_em_nbyte.h b/include/linux/tc_ematch/tc_em_nbyte.h index f19d1f58ec9d..9ed8c2e58488 100644 --- a/include/linux/tc_ematch/tc_em_nbyte.h +++ b/include/linux/tc_ematch/tc_em_nbyte.h @@ -1,6 +1,7 @@ #ifndef __LINUX_TC_EM_NBYTE_H #define __LINUX_TC_EM_NBYTE_H +#include #include struct tcf_em_nbyte -- cgit v1.2.1 From 30f410a6d372f067df3d02e3db328720bf421c81 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 20:14:36 +0530 Subject: headers_check fix: tc_ematch/tc_em_text.h fix the following 'make headers_check' warning: usr/include/linux/tc_ematch/tc_em_text.h:11: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/tc_ematch/tc_em_text.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/tc_ematch/tc_em_text.h b/include/linux/tc_ematch/tc_em_text.h index 7cd43e99c7f5..d12a73a225fc 100644 --- a/include/linux/tc_ematch/tc_em_text.h +++ b/include/linux/tc_ematch/tc_em_text.h @@ -1,6 +1,7 @@ #ifndef __LINUX_TC_EM_TEXT_H #define __LINUX_TC_EM_TEXT_H +#include #include #define TC_EM_TEXT_ALGOSIZ 16 -- cgit v1.2.1 From d8151585690d824ac5b60a94ef86f8bfd61478fa Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 20:15:47 +0530 Subject: headers_check fix: usb/cdc.h fix the following 'make headers_check' warning: usr/include/linux/usb/cdc.h:50: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/usb/cdc.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h index 18a729343ffa..3c86ed25a04c 100644 --- a/include/linux/usb/cdc.h +++ b/include/linux/usb/cdc.h @@ -9,6 +9,8 @@ #ifndef __LINUX_USB_CDC_H #define __LINUX_USB_CDC_H +#include + #define USB_CDC_SUBCLASS_ACM 0x02 #define USB_CDC_SUBCLASS_ETHERNET 0x06 #define USB_CDC_SUBCLASS_WHCM 0x08 -- cgit v1.2.1 From 4c866d444078d931579c50c9ce3133709390287b Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 20:16:33 +0530 Subject: headers_check fix: usb/gadgetfs.h fix the following 'make headers_check' warning: usr/include/linux/usb/gadgetfs.h:21: include of is preferred over Signed-off-by: Jaswinder Singh Rajput --- include/linux/usb/gadgetfs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/usb/gadgetfs.h b/include/linux/usb/gadgetfs.h index ea45f265ec05..612102e4d75e 100644 --- a/include/linux/usb/gadgetfs.h +++ b/include/linux/usb/gadgetfs.h @@ -18,7 +18,7 @@ #ifndef __LINUX_USB_GADGETFS_H #define __LINUX_USB_GADGETFS_H -#include +#include #include #include -- cgit v1.2.1 From bd247b348aaa9f28a53a64df06c69d6f40ff2280 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 20:20:10 +0530 Subject: headers_check fix: linux/aio_abi.h fix the following 'make headers_check' warning: usr/include/linux/aio_abi.h:58: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/aio_abi.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/aio_abi.h b/include/linux/aio_abi.h index 9e0172931315..2c8731664180 100644 --- a/include/linux/aio_abi.h +++ b/include/linux/aio_abi.h @@ -27,6 +27,7 @@ #ifndef __LINUX__AIO_ABI_H #define __LINUX__AIO_ABI_H +#include #include typedef unsigned long aio_context_t; -- cgit v1.2.1 From 85c09569e563cbb9376f10da20ada42107dfef98 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 20:26:25 +0530 Subject: headers_check fix: linux/atalk.h fix the following 'make headers_check' warning: usr/include/linux/atalk.h:15: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/atalk.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/atalk.h b/include/linux/atalk.h index e9ebac2e2ecc..d34c187432ed 100644 --- a/include/linux/atalk.h +++ b/include/linux/atalk.h @@ -1,6 +1,7 @@ #ifndef __LINUX_ATALK_H__ #define __LINUX_ATALK_H__ +#include #include /* -- cgit v1.2.1 From f757f603f7d52254120cbfcd967f67f663264c64 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 20:29:11 +0530 Subject: headers_check fix: linux/atmbr2684.h fix the following 'make headers_check' warning: usr/include/linux/atmbr2684.h:88: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/atmbr2684.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/atmbr2684.h b/include/linux/atmbr2684.h index 52bf72affbba..fdb2629b6189 100644 --- a/include/linux/atmbr2684.h +++ b/include/linux/atmbr2684.h @@ -1,6 +1,7 @@ #ifndef _LINUX_ATMBR2684_H #define _LINUX_ATMBR2684_H +#include #include #include /* For IFNAMSIZ */ -- cgit v1.2.1 From 5d461bfebe4be9ae8d25d4570d4eaa415ca76f0f Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 20:31:19 +0530 Subject: headers_check fix: linux/auto_fs4.h fix the following 'make headers_check' warning: usr/include/linux/auto_fs4.h:132: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/auto_fs4.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/auto_fs4.h b/include/linux/auto_fs4.h index 55fa478bd639..8b49ac48a5b7 100644 --- a/include/linux/auto_fs4.h +++ b/include/linux/auto_fs4.h @@ -12,6 +12,7 @@ #define _LINUX_AUTO_FS4_H /* Include common v3 definitions */ +#include #include /* autofs v4 definitions */ -- cgit v1.2.1 From 1da9ebd5abb2e960c4ca4d49f7587e6c76b16ac0 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 20:34:15 +0530 Subject: headers_check fix: linux/bfs_fs.h fix the following 'make headers_check' warning: usr/include/linux/bfs_fs.h:24: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/bfs_fs.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/linux/bfs_fs.h b/include/linux/bfs_fs.h index 8ed6dfdcd783..1c0b355aa515 100644 --- a/include/linux/bfs_fs.h +++ b/include/linux/bfs_fs.h @@ -6,6 +6,8 @@ #ifndef _LINUX_BFS_FS_H #define _LINUX_BFS_FS_H +#include + #define BFS_BSIZE_BITS 9 #define BFS_BSIZE (1< Date: Fri, 30 Jan 2009 20:36:52 +0530 Subject: headers_check fix: linux/blktrace_api.h fix the following 'make headers_check' warning: usr/include/linux/blktrace_api.h:96: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/blktrace_api.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h index 1dba3493d520..25379cba2370 100644 --- a/include/linux/blktrace_api.h +++ b/include/linux/blktrace_api.h @@ -1,6 +1,7 @@ #ifndef BLKTRACE_H #define BLKTRACE_H +#include #ifdef __KERNEL__ #include #include -- cgit v1.2.1 From 9fa91d99bfdd9582e43b6b9ab97678c51373c4ae Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 20:39:30 +0530 Subject: headers_check fix: linux/capability.h fix the following 'make headers_check' warning: usr/include/linux/capability.h:73: extern's make no sense in userspace Signed-off-by: Jaswinder Singh Rajput --- include/linux/capability.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/include/linux/capability.h b/include/linux/capability.h index 02bdb768d43b..1b9872556131 100644 --- a/include/linux/capability.h +++ b/include/linux/capability.h @@ -69,10 +69,6 @@ typedef struct __user_cap_data_struct { #define VFS_CAP_U32 VFS_CAP_U32_2 #define VFS_CAP_REVISION VFS_CAP_REVISION_2 -#ifdef CONFIG_SECURITY_FILE_CAPABILITIES -extern int file_caps_enabled; -#endif - struct vfs_cap_data { __le32 magic_etc; /* Little endian */ struct { @@ -96,6 +92,10 @@ struct vfs_cap_data { #define _KERNEL_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_3 #define _KERNEL_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_3 +#ifdef CONFIG_SECURITY_FILE_CAPABILITIES +extern int file_caps_enabled; +#endif + typedef struct kernel_cap_struct { __u32 cap[_KERNEL_CAPABILITY_U32S]; } kernel_cap_t; -- cgit v1.2.1 From 960066a919f1db57817df6d02e72b01542f1deed Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 20:41:51 +0530 Subject: headers_check fix: linux/cdrom.h fix the following 'make headers_check' warning: usr/include/linux/cdrom.h:155: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/cdrom.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/cdrom.h b/include/linux/cdrom.h index 0b49e08d3cb0..78e904796622 100644 --- a/include/linux/cdrom.h +++ b/include/linux/cdrom.h @@ -11,6 +11,7 @@ #ifndef _LINUX_CDROM_H #define _LINUX_CDROM_H +#include #include /******************************************************* -- cgit v1.2.1 From 59e4cf19ede2d2725c1b336707c1077afdd3cf85 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 20:43:31 +0530 Subject: headers_check fix: linux/cgroupstats.h fix the following 'make headers_check' warning: usr/include/linux/cgroupstats.h:31: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/cgroupstats.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/cgroupstats.h b/include/linux/cgroupstats.h index 4f53abf6855d..3753c33160d1 100644 --- a/include/linux/cgroupstats.h +++ b/include/linux/cgroupstats.h @@ -15,6 +15,7 @@ #ifndef _LINUX_CGROUPSTATS_H #define _LINUX_CGROUPSTATS_H +#include #include /* -- cgit v1.2.1 From 37eb1f4c3320ed505fbe59a916635b2342c740e4 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 20:51:30 +0530 Subject: headers_check fix: linux/dlm_plock.h fix the following 'make headers_check' warning: usr/include/linux/dlm_plock.h:25: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/dlm_plock.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/dlm_plock.h b/include/linux/dlm_plock.h index 18d5fdbceb74..2dd21243104f 100644 --- a/include/linux/dlm_plock.h +++ b/include/linux/dlm_plock.h @@ -9,6 +9,8 @@ #ifndef __DLM_PLOCK_DOT_H__ #define __DLM_PLOCK_DOT_H__ +#include + #define DLM_PLOCK_MISC_NAME "dlm_plock" #define DLM_PLOCK_VERSION_MAJOR 1 -- cgit v1.2.1 From 57d1780fab89d3736de0d24189129c17178448f0 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 20:52:54 +0530 Subject: headers_check fix: linux/dn.h fix the following 'make headers_check' warning: usr/include/linux/dn.h:75: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/dn.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/dn.h b/include/linux/dn.h index 02bba040fcfb..fe9990823193 100644 --- a/include/linux/dn.h +++ b/include/linux/dn.h @@ -1,6 +1,8 @@ #ifndef _LINUX_DN_H #define _LINUX_DN_H +#include + /* DECnet Data Structures and Constants -- cgit v1.2.1 From 4144147081b9d08e69055a780888fcbb7cfcbb8e Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 20:54:27 +0530 Subject: headers_check fix: linux/edd.h fix the following 'make headers_check' warning: usr/include/linux/edd.h:70: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/edd.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/edd.h b/include/linux/edd.h index 5d747c5cd0fe..4cbd0fe9df08 100644 --- a/include/linux/edd.h +++ b/include/linux/edd.h @@ -30,6 +30,8 @@ #ifndef _LINUX_EDD_H #define _LINUX_EDD_H +#include + #define EDDNR 0x1e9 /* addr of number of edd_info structs at EDDBUF in boot_params - treat this as 1 byte */ #define EDDBUF 0xd00 /* addr of edd_info structs in boot_params */ -- cgit v1.2.1 From bd71b5f734c66ad0134e308036b13d122907b8c6 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 21:01:11 +0530 Subject: headers_check fix: linux/efs_fs_sb.h fix the following 'make headers_check' warning: usr/include/linux/efs_fs_sb.h:49: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/efs_fs_sb.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/efs_fs_sb.h b/include/linux/efs_fs_sb.h index ff1945e37790..a01be90c58cc 100644 --- a/include/linux/efs_fs_sb.h +++ b/include/linux/efs_fs_sb.h @@ -9,6 +9,7 @@ #ifndef __EFS_FS_SB_H__ #define __EFS_FS_SB_H__ +#include #include /* EFS superblock magic numbers */ -- cgit v1.2.1 From 177a858ff8d71a8e7f8b0ef53ff49441e29c8fb1 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 21:04:44 +0530 Subject: headers_check fix: linux/elf-fdpic.h fix the following 'make headers_check' warning: usr/include/linux/elf-fdpic.h:62: extern's make no sense in userspace Signed-off-by: Jaswinder Singh Rajput --- include/linux/elf-fdpic.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/elf-fdpic.h b/include/linux/elf-fdpic.h index 9f5b7456bff3..7cd2e80cebc8 100644 --- a/include/linux/elf-fdpic.h +++ b/include/linux/elf-fdpic.h @@ -58,11 +58,13 @@ struct elf_fdpic_params { #define ELF_FDPIC_FLAG_PRESENT 0x80000000 /* T if this object is present */ }; +#ifdef __KERNEL__ #ifdef CONFIG_MMU extern void elf_fdpic_arch_lay_out_mm(struct elf_fdpic_params *exec_params, struct elf_fdpic_params *interp_params, unsigned long *start_stack, unsigned long *start_brk); #endif +#endif /* __KERNEL__ */ #endif /* _LINUX_ELF_FDPIC_H */ -- cgit v1.2.1 From f4aa1c30255278b7b50a1cd273c7b4a46f099a90 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 21:05:50 +0530 Subject: headers_check fix: linux/elf.h fix the following 'make headers_check' warnings: usr/include/linux/elf.h:379: extern's make no sense in userspace usr/include/linux/elf.h:387: extern's make no sense in userspace usr/include/linux/elf.h:401: extern's make no sense in userspace usr/include/linux/elf.h:402: extern's make no sense in userspace Signed-off-by: Jaswinder Singh Rajput --- include/linux/elf.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/linux/elf.h b/include/linux/elf.h index 0b61ca41a044..45a937be6d38 100644 --- a/include/linux/elf.h +++ b/include/linux/elf.h @@ -377,6 +377,7 @@ typedef struct elf64_note { Elf64_Word n_type; /* Content type */ } Elf64_Nhdr; +#ifdef __KERNEL__ #if ELF_CLASS == ELFCLASS32 extern Elf32_Dyn _DYNAMIC []; @@ -404,5 +405,5 @@ static inline int elf_coredump_extra_notes_write(struct file *file, extern int elf_coredump_extra_notes_size(void); extern int elf_coredump_extra_notes_write(struct file *file, loff_t *foffset); #endif - +#endif /* __KERNEL__ */ #endif /* _LINUX_ELF_H */ -- cgit v1.2.1 From 93c1c0e310b56acbd366a43b15260a1775481f24 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 21:09:18 +0530 Subject: headers_check fix: linux/errqueue.h fix the following 'make headers_check' warning: usr/include/linux/errqueue.h:6: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/errqueue.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/errqueue.h b/include/linux/errqueue.h index 92f8d4fab32b..ceb1454b6977 100644 --- a/include/linux/errqueue.h +++ b/include/linux/errqueue.h @@ -1,6 +1,8 @@ #ifndef _LINUX_ERRQUEUE_H #define _LINUX_ERRQUEUE_H 1 +#include + struct sock_extended_err { __u32 ee_errno; -- cgit v1.2.1 From 985f302cb42e18912c88a3d2f9d9008844045ee3 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 21:10:52 +0530 Subject: headers_check fix: linux/genetlink.h fix the following 'make headers_check' warning: usr/include/linux/genetlink.h:12: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/genetlink.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/genetlink.h b/include/linux/genetlink.h index 7da02c93002b..b834ef6d59fa 100644 --- a/include/linux/genetlink.h +++ b/include/linux/genetlink.h @@ -1,6 +1,7 @@ #ifndef __LINUX_GENERIC_NETLINK_H #define __LINUX_GENERIC_NETLINK_H +#include #include #define GENL_NAMSIZ 16 /* length of family name */ -- cgit v1.2.1 From 237416fe05067237f0bcc6370d84c09b52fb776a Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 21:12:38 +0530 Subject: headers_check fix: linux/gfs2_ondisk.h fix the following 'make headers_check' warning: usr/include/linux/gfs2_ondisk.h:109: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/gfs2_ondisk.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/gfs2_ondisk.h b/include/linux/gfs2_ondisk.h index 14d0df0b5749..c56b4bce56d0 100644 --- a/include/linux/gfs2_ondisk.h +++ b/include/linux/gfs2_ondisk.h @@ -10,6 +10,8 @@ #ifndef __GFS2_ONDISK_DOT_H__ #define __GFS2_ONDISK_DOT_H__ +#include + #define GFS2_MAGIC 0x01161970 #define GFS2_BASIC_BLOCK 512 #define GFS2_BASIC_BLOCK_SHIFT 9 -- cgit v1.2.1 From b08ead0527bcfdcab39a347b531701289485b484 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 21:15:34 +0530 Subject: headers_check fix: linux/hid.h fix the following 'make headers_check' warnings: usr/include/linux/hid.h:69: extern's make no sense in userspace usr/include/linux/hid.h:76: extern's make no sense in userspace Signed-off-by: Jaswinder Singh Rajput --- include/linux/hid.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/hid.h b/include/linux/hid.h index 81aa84d60c6b..fa8ee9cef7be 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -791,6 +791,7 @@ dbg_hid(const char *fmt, ...) __FILE__ , ## arg) #endif /* HID_FF */ +#ifdef __KERNEL__ #ifdef CONFIG_HID_COMPAT #define HID_COMPAT_LOAD_DRIVER(name) \ /* prototype to avoid sparse warning */ \ @@ -804,6 +805,7 @@ EXPORT_SYMBOL(hid_compat_##name) extern void hid_compat_##name(void); \ hid_compat_##name(); \ } while (0) +#endif /* __KERNEL__ */ #endif -- cgit v1.2.1 From c244ae5b16dc31b5bea67e6d6e9d6ff654aee781 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 21:17:06 +0530 Subject: headers_check fix: linux/hiddev.h fix the following 'make headers_check' warning: usr/include/linux/hiddev.h:40: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/hiddev.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/hiddev.h b/include/linux/hiddev.h index c760ae0eb6a1..bb6f58baf319 100644 --- a/include/linux/hiddev.h +++ b/include/linux/hiddev.h @@ -27,6 +27,8 @@ * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic */ +#include + /* * The event structure itself */ -- cgit v1.2.1 From 1cc49ae2e6d241e5cfc2c52e3329f5ef8dd42f18 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 21:18:37 +0530 Subject: headers_check fix: linux/icmpv6.h fix the following 'make headers_check' warning: usr/include/linux/icmpv6.h:8: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/icmpv6.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/icmpv6.h b/include/linux/icmpv6.h index a93a8dd33118..10d701eec484 100644 --- a/include/linux/icmpv6.h +++ b/include/linux/icmpv6.h @@ -1,6 +1,7 @@ #ifndef _LINUX_ICMPV6_H #define _LINUX_ICMPV6_H +#include #include struct icmp6hdr { -- cgit v1.2.1 From 680ee0bd2a9625965812c1209476168fd0704a00 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 21:21:01 +0530 Subject: headers_check fix: linux/if_addr.h fix the following 'make headers_check' warning: usr/include/linux/if_addr.h:8: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/if_addr.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/if_addr.h b/include/linux/if_addr.h index 43f3bedaafd3..a60c821be44c 100644 --- a/include/linux/if_addr.h +++ b/include/linux/if_addr.h @@ -1,6 +1,7 @@ #ifndef __LINUX_IF_ADDR_H #define __LINUX_IF_ADDR_H +#include #include struct ifaddrmsg -- cgit v1.2.1 From 1759cb994c3ff51e69268379da1cdd96048a8268 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 21:25:00 +0530 Subject: headers_check fix: linux/if_addrlabel.h fix the following 'make headers_check' warning: usr/include/linux/if_addrlabel.h:15: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/if_addrlabel.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/if_addrlabel.h b/include/linux/if_addrlabel.h index 9fe79c95dd28..89571f65d6de 100644 --- a/include/linux/if_addrlabel.h +++ b/include/linux/if_addrlabel.h @@ -10,6 +10,8 @@ #ifndef __LINUX_IF_ADDRLABEL_H #define __LINUX_IF_ADDRLABEL_H +#include + struct ifaddrlblmsg { __u8 ifal_family; /* Address family */ -- cgit v1.2.1 From ba7161387e82fbbdc4b49533aa1345bb7befda13 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 21:26:35 +0530 Subject: headers_check fix: linux/if_fc.h fix the following 'make headers_check' warning: usr/include/linux/if_fc.h:37: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/if_fc.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/if_fc.h b/include/linux/if_fc.h index 376a34ea4723..6ed7f1bf35c8 100644 --- a/include/linux/if_fc.h +++ b/include/linux/if_fc.h @@ -20,6 +20,7 @@ #ifndef _LINUX_IF_FC_H #define _LINUX_IF_FC_H +#include #define FC_ALEN 6 /* Octets in one ethernet addr */ #define FC_HLEN (sizeof(struct fch_hdr)+sizeof(struct fcllc)) -- cgit v1.2.1 From b06e936939931c5acb1ca5dfe1d02b4d2f7cb11f Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 21:27:59 +0530 Subject: headers_check fix: linux/if_hippi.h fix the following 'make headers_check' warning: usr/include/linux/if_hippi.h:82: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/if_hippi.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/if_hippi.h b/include/linux/if_hippi.h index f0f23516bb59..4a7c9940b080 100644 --- a/include/linux/if_hippi.h +++ b/include/linux/if_hippi.h @@ -22,6 +22,7 @@ #ifndef _LINUX_IF_HIPPI_H #define _LINUX_IF_HIPPI_H +#include #include /* -- cgit v1.2.1 From 85db53102dbf0816e9c5426c9322a64759e7166b Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 21:29:20 +0530 Subject: headers_check fix: linux/if_link.h fix the following 'make headers_check' warning: usr/include/linux/if_link.h:9: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/if_link.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/if_link.h b/include/linux/if_link.h index f9032c88716a..176c5182c515 100644 --- a/include/linux/if_link.h +++ b/include/linux/if_link.h @@ -1,6 +1,7 @@ #ifndef _LINUX_IF_LINK_H #define _LINUX_IF_LINK_H +#include #include /* The struct should be in sync with struct net_device_stats */ -- cgit v1.2.1 From 0fe5a8fe0c145a6ff8f3daacd32f1824d0c021a9 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 21:31:29 +0530 Subject: headers_check fix: linux/if_ppp.h fix the following 'make headers_check' warning: usr/include/linux/if_ppp.h:96: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/if_ppp.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/if_ppp.h b/include/linux/if_ppp.h index c3b1f8562709..fcef103aa3f6 100644 --- a/include/linux/if_ppp.h +++ b/include/linux/if_ppp.h @@ -33,6 +33,7 @@ #ifndef _IF_PPP_H_ #define _IF_PPP_H_ +#include #include /* -- cgit v1.2.1 From 84ad40ebbaeb22fc665b1f307d32128c46e8d42d Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 21:32:52 +0530 Subject: headers_check fix: linux/if_strip.h fix the following 'make headers_check' warning: usr/include/linux/if_strip.h:22: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/if_strip.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/if_strip.h b/include/linux/if_strip.h index fb5c5c98442f..6526a6235832 100644 --- a/include/linux/if_strip.h +++ b/include/linux/if_strip.h @@ -18,6 +18,8 @@ #ifndef __LINUX_STRIP_H #define __LINUX_STRIP_H +#include + typedef struct { __u8 c[6]; } MetricomAddress; -- cgit v1.2.1 From 65863dbc0833e06b905679f61450f05a68bae4c2 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 21:34:36 +0530 Subject: headers_check fix: linux/if_tr.h fix the following 'make headers_check' warning: usr/include/linux/if_tr.h:37: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/if_tr.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/if_tr.h b/include/linux/if_tr.h index 5bcec8b2c5e2..fc23aeb0f201 100644 --- a/include/linux/if_tr.h +++ b/include/linux/if_tr.h @@ -19,6 +19,7 @@ #ifndef _LINUX_IF_TR_H #define _LINUX_IF_TR_H +#include #include /* For __be16 */ /* IEEE 802.5 Token-Ring magic constants. The frame sizes omit the preamble -- cgit v1.2.1 From de8b0bcafabfb4400aa028282293ce7d52307433 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 21:36:04 +0530 Subject: headers_check fix: linux/igmp.h fix the following 'make headers_check' warning: usr/include/linux/igmp.h:31: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/igmp.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/igmp.h b/include/linux/igmp.h index f734a0ba0698..92fbd8cbd68f 100644 --- a/include/linux/igmp.h +++ b/include/linux/igmp.h @@ -16,6 +16,7 @@ #ifndef _LINUX_IGMP_H #define _LINUX_IGMP_H +#include #include /* -- cgit v1.2.1 From 2df005b75ab910f789f099f81bb70b3aa37203a7 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 21:42:47 +0530 Subject: headers_check fix: linux/inet_diag.h fix the following 'make headers_check' warning: usr/include/linux/inet_diag.h:16: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/inet_diag.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/inet_diag.h b/include/linux/inet_diag.h index 6e8bc548635a..bc8c49022084 100644 --- a/include/linux/inet_diag.h +++ b/include/linux/inet_diag.h @@ -1,6 +1,8 @@ #ifndef _INET_DIAG_H_ #define _INET_DIAG_H_ 1 +#include + /* Just some random number */ #define TCPDIAG_GETSOCK 18 #define DCCPDIAG_GETSOCK 19 -- cgit v1.2.1 From 217a2291570b1e4c28cb6e4cd099707e456a09b8 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 21:44:19 +0530 Subject: headers_check fix: linux/ip6_tunnel.h fix the following 'make headers_check' warning: include/linux/ip6_tunnel.h:21: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/ip6_tunnel.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/ip6_tunnel.h b/include/linux/ip6_tunnel.h index 1e7cc4af40de..acb9ad684d63 100644 --- a/include/linux/ip6_tunnel.h +++ b/include/linux/ip6_tunnel.h @@ -1,6 +1,8 @@ #ifndef _IP6_TUNNEL_H #define _IP6_TUNNEL_H +#include + #define IPV6_TLV_TNL_ENCAP_LIMIT 4 #define IPV6_DEFAULT_TNL_ENCAP_LIMIT 4 -- cgit v1.2.1 From 5c6aa2badf1b97ead5ffec8094f0c6236e0c07c5 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 21:46:43 +0530 Subject: headers_check fix: linux/ipv6.h fix the following 'make headers_check' warning: usr/include/linux/ipv6.h:26: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/ipv6.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index 0b816cae533e..476d9464ac82 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -1,6 +1,7 @@ #ifndef _IPV6_H #define _IPV6_H +#include #include #include -- cgit v1.2.1 From e5144de521417b0f0eea74ece89acd437ecd32c9 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 21:47:52 +0530 Subject: headers_check fix: linux/ipv6_route.h fix the following 'make headers_check' warning: usr/include/linux/ipv6_route.h:42: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/ipv6_route.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/ipv6_route.h b/include/linux/ipv6_route.h index b323ff577967..1e7d8af2defe 100644 --- a/include/linux/ipv6_route.h +++ b/include/linux/ipv6_route.h @@ -13,6 +13,8 @@ #ifndef _LINUX_IPV6_ROUTE_H #define _LINUX_IPV6_ROUTE_H +#include + #define RTF_DEFAULT 0x00010000 /* default - learned via ND */ #define RTF_ALLONLINK 0x00020000 /* (deprecated and will be removed) fallback, no routers on link */ -- cgit v1.2.1 From d6d20f54847e27ed886e8285c208368ef3d42abb Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 21:49:07 +0530 Subject: headers_check fix: linux/ipx.h fix the following 'make headers_check' warning: usr/include/linux/ipx.h:13: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/ipx.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/ipx.h b/include/linux/ipx.h index eb19b4ea84f4..aabb1d294025 100644 --- a/include/linux/ipx.h +++ b/include/linux/ipx.h @@ -1,5 +1,6 @@ #ifndef _IPX_H_ #define _IPX_H_ +#include #include #include #define IPX_NODE_LEN 6 -- cgit v1.2.1 From df9c04ed3ff455aa5cb7c4bcddf4544fe54cfa33 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 21:50:39 +0530 Subject: headers_check fix: linux/irda.h fix the following 'make headers_check' warning: usr/include/linux/irda.h:127: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/irda.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/irda.h b/include/linux/irda.h index 28f88ecba344..00bdad0e8515 100644 --- a/include/linux/irda.h +++ b/include/linux/irda.h @@ -25,6 +25,8 @@ #ifndef KERNEL_IRDA_H #define KERNEL_IRDA_H +#include + /* Please do *not* add any #include in this file, this file is * included as-is in user space. * Please fix the calling file to properly included needed files before -- cgit v1.2.1 From 4b7ae34277608a30346d076beb44cbc466aa73e5 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 21:54:23 +0530 Subject: headers_check fix: linux/minix_fs.h fix the following 'make headers_check' warning: usr/include/linux/minix_fs.h:34: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/minix_fs.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/minix_fs.h b/include/linux/minix_fs.h index 0e39745f5111..13fe09e0576a 100644 --- a/include/linux/minix_fs.h +++ b/include/linux/minix_fs.h @@ -1,6 +1,7 @@ #ifndef _LINUX_MINIX_FS_H #define _LINUX_MINIX_FS_H +#include #include /* -- cgit v1.2.1 From 8ef342021a55e4237e593c7f6304d0caa7bf1232 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 21:56:32 +0530 Subject: headers_check fix: linux/msdos_fs.h fix the following 'make headers_check' warning: usr/include/linux/msdos_fs.h:100: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/msdos_fs.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/msdos_fs.h b/include/linux/msdos_fs.h index e0a9b207920d..ce38f1caa5e1 100644 --- a/include/linux/msdos_fs.h +++ b/include/linux/msdos_fs.h @@ -1,6 +1,7 @@ #ifndef _LINUX_MSDOS_FS_H #define _LINUX_MSDOS_FS_H +#include #include #include -- cgit v1.2.1 From ee79a6415f911801eb7804704ac130088281b2d8 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 21:58:19 +0530 Subject: headers_check fix: linux/neighbour.h fix the following 'make headers_check' warning: usr/include/linux/neighbour.h:8: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/neighbour.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/neighbour.h b/include/linux/neighbour.h index bd3bbf668cdb..8730d5dae1bc 100644 --- a/include/linux/neighbour.h +++ b/include/linux/neighbour.h @@ -1,6 +1,7 @@ #ifndef __LINUX_NEIGHBOUR_H #define __LINUX_NEIGHBOUR_H +#include #include struct ndmsg -- cgit v1.2.1 From a81184c1f8cf8589a00894c20422982defc3f056 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 21:59:48 +0530 Subject: headers_check fix: linux/nfs_idmap.h fix the following 'make headers_check' warning: usr/include/linux/nfs_idmap.h:55: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/nfs_idmap.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/nfs_idmap.h b/include/linux/nfs_idmap.h index 15a9f3b7289a..91a1c24e0cbf 100644 --- a/include/linux/nfs_idmap.h +++ b/include/linux/nfs_idmap.h @@ -37,6 +37,8 @@ #ifndef NFS_IDMAP_H #define NFS_IDMAP_H +#include + /* XXX from bits/utmp.h */ #define IDMAP_NAMESZ 128 -- cgit v1.2.1 From 06f43adba62f99de101616ffc5d0564aab237111 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 22:03:25 +0530 Subject: headers_check fix: linux/phonet.h fix the following 'make headers_check' warning: usr/include/linux/phonet.h:50: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/phonet.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/phonet.h b/include/linux/phonet.h index 4157faa857b6..ee5e3c9e2bca 100644 --- a/include/linux/phonet.h +++ b/include/linux/phonet.h @@ -23,6 +23,8 @@ #ifndef LINUX_PHONET_H #define LINUX_PHONET_H +#include + /* Automatic protocol selection */ #define PN_PROTO_TRANSPORT 0 /* Phonet datagram socket */ -- cgit v1.2.1 From ed307444d8f276d7052400c47d9f4c5393997c42 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 22:05:32 +0530 Subject: headers_check fix: linux/pkt_cls.h fix the following 'make headers_check' warning: linux/pkt_cls.h:122: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/pkt_cls.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/pkt_cls.h b/include/linux/pkt_cls.h index e6aa8482ad7a..3c842edff388 100644 --- a/include/linux/pkt_cls.h +++ b/include/linux/pkt_cls.h @@ -1,6 +1,7 @@ #ifndef __LINUX_PKT_CLS_H #define __LINUX_PKT_CLS_H +#include #include /* I think i could have done better macros ; for now this is stolen from -- cgit v1.2.1 From b8adfd3c753b47c47f626e032da7999530c316f0 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 22:07:05 +0530 Subject: headers_check fix: linux/pkt_sched.h fix the following 'make headers_check' warning: usr/include/linux/pkt_sched.h:32: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/pkt_sched.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/pkt_sched.h b/include/linux/pkt_sched.h index e3f133adba78..b2648e8e4987 100644 --- a/include/linux/pkt_sched.h +++ b/include/linux/pkt_sched.h @@ -1,6 +1,8 @@ #ifndef __LINUX_PKT_SCHED_H #define __LINUX_PKT_SCHED_H +#include + /* Logical priority bands not depending on specific packet scheduler. Every scheduler will map them to real traffic classes, if it has no more precise mechanism to classify packets. -- cgit v1.2.1 From 7260a91666a3149181e7b78bbf73beebbb04f8fa Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 22:09:17 +0530 Subject: headers_check fix: linux/ppp_defs.h fix the following 'make headers_check' warning: usr/include/linux/ppp_defs.h:50: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/ppp_defs.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/ppp_defs.h b/include/linux/ppp_defs.h index 6e8adc77522c..1c866bda2018 100644 --- a/include/linux/ppp_defs.h +++ b/include/linux/ppp_defs.h @@ -25,6 +25,8 @@ * OR MODIFICATIONS. */ +#include + /* * ==FILEVERSION 20000114== * -- cgit v1.2.1 From 68622c61dc7971382f5d69cd5d881e618ea30414 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 22:11:32 +0530 Subject: headers_check fix: linux/random.h fix the following 'make headers_check' warning: usr/include/linux/random.h:39: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/random.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/random.h b/include/linux/random.h index 407ea3646f8f..25d02fe5c9b5 100644 --- a/include/linux/random.h +++ b/include/linux/random.h @@ -7,6 +7,7 @@ #ifndef _LINUX_RANDOM_H #define _LINUX_RANDOM_H +#include #include #include -- cgit v1.2.1 From a788fd53aec9a439f6b8bf57888c30aea1176e1b Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 22:14:02 +0530 Subject: headers_check fix: linux/signalfd.h fix the following 'make headers_check' warning: usr/include/linux/signalfd.h:19: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/signalfd.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/signalfd.h b/include/linux/signalfd.h index bef0c46d4713..b363b916c909 100644 --- a/include/linux/signalfd.h +++ b/include/linux/signalfd.h @@ -8,6 +8,7 @@ #ifndef _LINUX_SIGNALFD_H #define _LINUX_SIGNALFD_H +#include /* For O_CLOEXEC and O_NONBLOCK */ #include -- cgit v1.2.1 From e6faa002be269233bf1e8961e7e0a79ca3f2db8b Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 22:17:53 +0530 Subject: headers_check fix: linux/sound.h fix the following 'make headers_check' warnings: usr/include/linux/sound.h:33: extern's make no sense in userspace usr/include/linux/sound.h:34: extern's make no sense in userspace usr/include/linux/sound.h:35: extern's make no sense in userspace usr/include/linux/sound.h:36: extern's make no sense in userspace usr/include/linux/sound.h:37: extern's make no sense in userspace usr/include/linux/sound.h:39: extern's make no sense in userspace usr/include/linux/sound.h:40: extern's make no sense in userspace usr/include/linux/sound.h:41: extern's make no sense in userspace usr/include/linux/sound.h:42: extern's make no sense in userspace Signed-off-by: Jaswinder Singh Rajput --- include/linux/sound.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/sound.h b/include/linux/sound.h index 9e2a94feed6b..44dcf0570432 100644 --- a/include/linux/sound.h +++ b/include/linux/sound.h @@ -25,6 +25,7 @@ #define SND_DEV_AMIDI 13 /* Like /dev/midi (obsolete) */ #define SND_DEV_ADMMIDI 14 /* Like /dev/dmmidi (onsolete) */ +#ifdef __KERNEL__ /* * Sound core interface functions */ @@ -40,3 +41,4 @@ extern void unregister_sound_special(int unit); extern void unregister_sound_mixer(int unit); extern void unregister_sound_midi(int unit); extern void unregister_sound_dsp(int unit); +#endif /* __KERNEL__ */ -- cgit v1.2.1 From 6b6bcd0ed953ae0ed73af4759788fb8384bbaeed Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 22:20:04 +0530 Subject: headers_check fix: linux/synclink.h fix the following 'make headers_check' warning: usr/include/linux/synclink.h:209: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/synclink.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/synclink.h b/include/linux/synclink.h index c844a229acc9..99b8bdb17b2b 100644 --- a/include/linux/synclink.h +++ b/include/linux/synclink.h @@ -13,6 +13,8 @@ #define _SYNCLINK_H_ #define SYNCLINK_H_VERSION 3.6 +#include + #define BIT0 0x0001 #define BIT1 0x0002 #define BIT2 0x0004 -- cgit v1.2.1 From 448314fc968252b0b95f74bbe63fdcaf41e6413d Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 22:21:19 +0530 Subject: headers_check fix: linux/taskstats.h fix the following 'make headers_check' warning: usr/include/linux/taskstats.h:44: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/taskstats.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/taskstats.h b/include/linux/taskstats.h index 18269e956a71..341dddb55090 100644 --- a/include/linux/taskstats.h +++ b/include/linux/taskstats.h @@ -16,6 +16,8 @@ #ifndef _LINUX_TASKSTATS_H #define _LINUX_TASKSTATS_H +#include + /* Format for per-task data returned to userland when * - a task exits * - listener requests stats for a task -- cgit v1.2.1 From 8b1e3a2f7f84484a8c208671adac39eb148c7d61 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 22:22:51 +0530 Subject: headers_check fix: linux/video_decoder.h fix the following 'make headers_check' warning: usr/include/linux/video_decoder.h:7: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/video_decoder.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/video_decoder.h b/include/linux/video_decoder.h index 121e26da2c18..e26c0c86a6ea 100644 --- a/include/linux/video_decoder.h +++ b/include/linux/video_decoder.h @@ -1,6 +1,8 @@ #ifndef _LINUX_VIDEO_DECODER_H #define _LINUX_VIDEO_DECODER_H +#include + #define HAVE_VIDEO_DECODER 1 struct video_decoder_capability { /* this name is too long */ -- cgit v1.2.1 From a4c1d7c8c61969667a853d08b039507669463807 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 22:24:09 +0530 Subject: headers_check fix: linux/video_encoder.h fix the following 'make headers_check' warning: usr/include/linux/video_encoder.h:5: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/video_encoder.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/video_encoder.h b/include/linux/video_encoder.h index 4b0e6907a7b4..b7b6423bbb8a 100644 --- a/include/linux/video_encoder.h +++ b/include/linux/video_encoder.h @@ -1,6 +1,8 @@ #ifndef _LINUX_VIDEO_ENCODER_H #define _LINUX_VIDEO_ENCODER_H +#include + struct video_encoder_capability { /* this name is too long */ __u32 flags; #define VIDEO_ENCODER_PAL 1 /* can encode PAL signal */ -- cgit v1.2.1 From 98be96b85398499212bc77ae3076a69e20368428 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 22:26:01 +0530 Subject: headers_check fix: linux/videodev.h fix the following 'make headers_check' warning: usr/include/linux/videodev.h:53: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/videodev.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/videodev.h b/include/linux/videodev.h index 15a653d41132..837f392fbe97 100644 --- a/include/linux/videodev.h +++ b/include/linux/videodev.h @@ -12,6 +12,7 @@ #ifndef __LINUX_VIDEODEV_H #define __LINUX_VIDEODEV_H +#include #include #include -- cgit v1.2.1 From 982f8184f9a9251ba4e5c6d79ec32d25c0ad3cc8 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 22:27:58 +0530 Subject: headers_check fix: linux/virtio_blk.h fix the following 'make headers_check' warning: usr/include/linux/virtio_blk.h:21: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/virtio_blk.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h index c1aef85243bf..94c56d29869d 100644 --- a/include/linux/virtio_blk.h +++ b/include/linux/virtio_blk.h @@ -2,6 +2,7 @@ #define _LINUX_VIRTIO_BLK_H /* This header is BSD licensed so anyone can use the definitions to implement * compatible drivers/servers. */ +#include #include /* The ID for virtio_block */ -- cgit v1.2.1 From 8697325408d9be18fa24346c346b23fa56c3b190 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 22:29:33 +0530 Subject: headers_check fix: linux/virtio_console.h fix the following 'make headers_check' warning: usr/include/linux/virtio_console.h:15: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/virtio_console.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/virtio_console.h b/include/linux/virtio_console.h index 7615ffcdd555..dc161115ae35 100644 --- a/include/linux/virtio_console.h +++ b/include/linux/virtio_console.h @@ -1,5 +1,6 @@ #ifndef _LINUX_VIRTIO_CONSOLE_H #define _LINUX_VIRTIO_CONSOLE_H +#include #include /* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so * anyone can use the definitions to implement compatible drivers/servers. */ -- cgit v1.2.1 From 9a0e0ac21ca2af4715808b97bd600f0aecd87240 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 22:31:05 +0530 Subject: headers_check fix: linux/virtio_net.h fix the following 'make headers_check' warning: usr/include/linux/virtio_net.h:28: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/virtio_net.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index 5cdd0aa8bde9..3efa86c3ecb3 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -2,6 +2,7 @@ #define _LINUX_VIRTIO_NET_H /* This header is BSD licensed so anyone can use the definitions to implement * compatible drivers/servers. */ +#include #include /* The ID for virtio_net */ -- cgit v1.2.1 From 70c2ed65fe4090c9b92512ee1e35dc6625539f90 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 22:32:35 +0530 Subject: headers_check fix: mtd/inftl-user.h fix the following 'make headers_check' warning: usr/include/mtd/inftl-user.h:61: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/mtd/inftl-user.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/mtd/inftl-user.h b/include/mtd/inftl-user.h index e17eda302b2d..d409d489d900 100644 --- a/include/mtd/inftl-user.h +++ b/include/mtd/inftl-user.h @@ -6,6 +6,8 @@ #ifndef __MTD_INFTL_USER_H__ #define __MTD_INFTL_USER_H__ +#include + #define OSAK_VERSION 0x5120 #define PERCENTUSED 98 -- cgit v1.2.1 From bb9f113f5ca7d182256dee69bcaebd4c79062305 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 22:33:29 +0530 Subject: headers_check fix: sound/hdsp.h fix the following 'make headers_check' warning: usr/include/sound/hdsp.h:33: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/sound/hdsp.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/sound/hdsp.h b/include/sound/hdsp.h index dec6b1dc37ea..d98a78dff2db 100644 --- a/include/sound/hdsp.h +++ b/include/sound/hdsp.h @@ -19,6 +19,8 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include + #define HDSP_MATRIX_MIXER_SIZE 2048 enum HDSP_IO_Type { -- cgit v1.2.1 From dab9c5e15e9faaf00e22b5e708dd19c44800c824 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 22:34:29 +0530 Subject: headers_check fix: video/sisfb.h fix the following 'make headers_check' warnings: usr/include/video/sisfb.h:25: include of is preferred over usr/include/video/sisfb.h:78: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/video/sisfb.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/video/sisfb.h b/include/video/sisfb.h index e402eb5b3c7a..fdd74f1a6791 100644 --- a/include/video/sisfb.h +++ b/include/video/sisfb.h @@ -21,8 +21,8 @@ #ifndef _LINUX_SISFB_H_ #define _LINUX_SISFB_H_ +#include #include -#include /**********************************************/ /* PUBLIC */ -- cgit v1.2.1 From de4d3795527b06c67e1333c5662f146b59c97e21 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 22:35:17 +0530 Subject: headers_check fix: video/uvesafb.h fix the following 'make headers_check' warning: usr/include/video/uvesafb.h:5: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/video/uvesafb.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/video/uvesafb.h b/include/video/uvesafb.h index 95bcef193954..0993a220a3e6 100644 --- a/include/video/uvesafb.h +++ b/include/video/uvesafb.h @@ -1,6 +1,8 @@ #ifndef _UVESAFB_H #define _UVESAFB_H +#include + struct v86_regs { __u32 ebx; __u32 ecx; -- cgit v1.2.1 From d5c72d7842c71403bc3d57ca05a8a1f96d81e262 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 22:39:17 +0530 Subject: headers_check fix: linux/nubus.h fix the following 'make headers_check' warning: usr/include/linux/nubus.h:232: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/nubus.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/nubus.h b/include/linux/nubus.h index c4355076d1a5..7382af374731 100644 --- a/include/linux/nubus.h +++ b/include/linux/nubus.h @@ -12,6 +12,7 @@ #ifndef LINUX_NUBUS_H #define LINUX_NUBUS_H +#include #ifdef __KERNEL__ #include #endif -- cgit v1.2.1 From 541c94f1d5ac2665fd15f1b827416f8c0b2f55cb Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 22:40:32 +0530 Subject: headers_check fix: linux/rtnetlink.h fix the following 'make headers_check' warning: usr/include/linux/rtnetlink.h:328: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/rtnetlink.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h index e88f7058b3a1..1e5f6730ff31 100644 --- a/include/linux/rtnetlink.h +++ b/include/linux/rtnetlink.h @@ -1,6 +1,7 @@ #ifndef __LINUX_RTNETLINK_H #define __LINUX_RTNETLINK_H +#include #include #include #include -- cgit v1.2.1 From 999721ca6d0c2540341acb73ac9048cbd6b05d3a Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 22:44:58 +0530 Subject: headers_check fix: x86, e820.h fix the following 'make headers_check' warning: usr/include/asm/e820.h:44: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- arch/x86/include/asm/e820.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h index 3d8ceddbd407..00d41ce4c844 100644 --- a/arch/x86/include/asm/e820.h +++ b/arch/x86/include/asm/e820.h @@ -49,6 +49,7 @@ #define E820_RESERVED_KERN 128 #ifndef __ASSEMBLY__ +#include struct e820entry { __u64 addr; /* start of memory segment */ __u64 size; /* size of memory segment */ -- cgit v1.2.1 From cef3767852a9b1a7ff4a8dfe0969e2d32eb728df Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 22:46:08 +0530 Subject: headers_check fix: x86, kvm.h fix the following 'make headers_check' warnings: usr/include/asm/kvm.h:9: include of is preferred over usr/include/asm/kvm.h:16: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- arch/x86/include/asm/kvm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/include/asm/kvm.h b/arch/x86/include/asm/kvm.h index b95162af0bf6..d2e3bf3608af 100644 --- a/arch/x86/include/asm/kvm.h +++ b/arch/x86/include/asm/kvm.h @@ -6,7 +6,7 @@ * */ -#include +#include #include /* Architectural interrupt line count. */ -- cgit v1.2.1 From 999b697b9d8b15756e65da72c816ef4363a945a5 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 22:47:27 +0530 Subject: headers_check fix: x86, mce.h fix the following 'make headers_check' warnings: usr/include/asm/mce.h:7: include of is preferred over usr/include/asm/mce.h:29: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- arch/x86/include/asm/mce.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index 1d6e17c2f23a..32c6e17b960b 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -3,8 +3,8 @@ #ifdef __x86_64__ +#include #include -#include /* * Machine Check support for x86 @@ -115,8 +115,6 @@ extern int mce_notify_user(void); #endif /* !CONFIG_X86_32 */ - - #ifdef CONFIG_X86_MCE extern void mcheck_init(struct cpuinfo_x86 *c); #else @@ -126,5 +124,4 @@ extern void stop_mce(void); extern void restart_mce(void); #endif /* __KERNEL__ */ - #endif /* _ASM_X86_MCE_H */ -- cgit v1.2.1 From d122072cc079d299e5191c9cbb6162ba8791624c Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 22:48:17 +0530 Subject: headers_check fix: x86, mtrr.h fix the following 'make headers_check' warning: usr/include/asm/mtrr.h:61: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- arch/x86/include/asm/mtrr.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/include/asm/mtrr.h b/arch/x86/include/asm/mtrr.h index 14080d22edb3..a51ada8467de 100644 --- a/arch/x86/include/asm/mtrr.h +++ b/arch/x86/include/asm/mtrr.h @@ -23,6 +23,7 @@ #ifndef _ASM_X86_MTRR_H #define _ASM_X86_MTRR_H +#include #include #include -- cgit v1.2.1 From 420ab35eef206d147973d26db14b5618868726be Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 22:52:16 +0530 Subject: headers_check fix: x86, ptrace-abi.h fix the following 'make headers_check' warnings: usr/include/asm/ptrace-abi.h:86: include of is preferred over usr/include/asm/ptrace-abi.h:93: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- arch/x86/include/asm/ptrace-abi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/include/asm/ptrace-abi.h b/arch/x86/include/asm/ptrace-abi.h index 25f1bb8fc626..8e0f8d199e05 100644 --- a/arch/x86/include/asm/ptrace-abi.h +++ b/arch/x86/include/asm/ptrace-abi.h @@ -83,7 +83,7 @@ #ifdef CONFIG_X86_PTRACE_BTS #ifndef __ASSEMBLY__ -#include +#include /* configuration/status structure used in PTRACE_BTS_CONFIG and PTRACE_BTS_STATUS commands. -- cgit v1.2.1 From e59afe6a21dce7bb3c63ba4f894a3195ae3d5529 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 22:53:49 +0530 Subject: headers_check fix: x86, sigcontext.h fix the following 'make headers_check' warnings: usr/include/asm/sigcontext.h:5: include of is preferred over usr/include/asm/sigcontext.h:24: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- arch/x86/include/asm/sigcontext.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/include/asm/sigcontext.h b/arch/x86/include/asm/sigcontext.h index 0afcb5e58acc..ec666491aaa4 100644 --- a/arch/x86/include/asm/sigcontext.h +++ b/arch/x86/include/asm/sigcontext.h @@ -2,7 +2,7 @@ #define _ASM_X86_SIGCONTEXT_H #include -#include +#include #define FP_XSTATE_MAGIC1 0x46505853U #define FP_XSTATE_MAGIC2 0x46505845U -- cgit v1.2.1 From 2de548faa78c650bb20c4680ee3a225cca33a45d Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 22:55:20 +0530 Subject: headers_check fix: x86, sigcontext32.h fix the following 'make headers_check' warning: usr/include/asm/sigcontext32.h:20: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- arch/x86/include/asm/sigcontext32.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/include/asm/sigcontext32.h b/arch/x86/include/asm/sigcontext32.h index 6126188cf3a9..ad1478c4ae12 100644 --- a/arch/x86/include/asm/sigcontext32.h +++ b/arch/x86/include/asm/sigcontext32.h @@ -1,6 +1,8 @@ #ifndef _ASM_X86_SIGCONTEXT32_H #define _ASM_X86_SIGCONTEXT32_H +#include + /* signal context for 32bit programs. */ #define X86_FXSR_MAGIC 0x0000 -- cgit v1.2.1 From 7cff3608d2553a045b676fa81b0cf54e4f2cc5ce Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 30 Jan 2009 22:57:38 +0530 Subject: headers_check fix: x86, swab.h fix the following 'make headers_check' warnings: usr/include/asm/swab.h:4: include of is preferred over usr/include/asm/swab.h:7: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- arch/x86/include/asm/swab.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/include/asm/swab.h b/arch/x86/include/asm/swab.h index 306d4178ffc9..557cd9f00661 100644 --- a/arch/x86/include/asm/swab.h +++ b/arch/x86/include/asm/swab.h @@ -1,7 +1,7 @@ #ifndef _ASM_X86_SWAB_H #define _ASM_X86_SWAB_H -#include +#include #include static inline __attribute_const__ __u32 __arch_swab32(__u32 val) -- cgit v1.2.1 From 33bfad54b58cf05cfe6678c3ec9235d4bc8db4c2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 30 Jan 2009 11:37:22 -0800 Subject: Allow opportunistic merging of VM_CAN_NONLINEAR areas Commit de33c8db5910cda599899dd431cc30d7c1018cbf ("Fix OOPS in mmap_region() when merging adjacent VM_LOCKED file segments") unified the vma merging of anonymous and file maps to just one place, which simplified the code and fixed a use-after-free bug that could cause an oops. But by doing the merge opportunistically before even having called ->mmap() on the file method, it now compares two different 'vm_flags' values: the pre-mmap() value of the new not-yet-formed vma, and previous mappings of the same file around it. And in doing so, it refused to merge the common file case, which adds a marker to say "I can be made non-linear". This fixes it by just adding a set of flags that don't have to match, because we know they are ok to merge. Currently it's only that single VM_CAN_NONLINEAR flag, but at least conceptually there could be others in the future. Reported-and-acked-by: Hugh Dickins Cc: Lee Schermerhorn Cc: Nick Piggin Cc: Andrew Morton Cc: Greg KH Signed-off-by: Linus Torvalds --- mm/mmap.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/mm/mmap.c b/mm/mmap.c index d3fa10a726cf..c581df14d0de 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -658,6 +658,9 @@ again: remove_next = 1 + (end > next->vm_end); validate_mm(mm); } +/* Flags that can be inherited from an existing mapping when merging */ +#define VM_MERGEABLE_FLAGS (VM_CAN_NONLINEAR) + /* * If the vma has a ->close operation then the driver probably needs to release * per-vma resources, so we don't attempt to merge those. @@ -665,7 +668,7 @@ again: remove_next = 1 + (end > next->vm_end); static inline int is_mergeable_vma(struct vm_area_struct *vma, struct file *file, unsigned long vm_flags) { - if (vma->vm_flags != vm_flags) + if ((vma->vm_flags ^ vm_flags) & ~VM_MERGEABLE_FLAGS) return 0; if (vma->vm_file != file) return 0; -- cgit v1.2.1 From 012703e0fc9fb1d6cdf778c49f45b796a85ef5bc Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 11 Jan 2009 18:27:10 +0000 Subject: MIPS: SMTC: Fix build after recent creditial changes. Signed-off-by: Ralf Baechle --- arch/mips/kernel/mips-mt-fpaff.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c index 5e77a3a21f98..42461310b185 100644 --- a/arch/mips/kernel/mips-mt-fpaff.c +++ b/arch/mips/kernel/mips-mt-fpaff.c @@ -79,7 +79,8 @@ asmlinkage long mipsmt_sys_sched_setaffinity(pid_t pid, unsigned int len, euid = current_euid(); retval = -EPERM; - if (euid != p->euid && euid != p->uid && !capable(CAP_SYS_NICE)) { + if (euid != p->cred->euid && euid != p->cred->uid && + !capable(CAP_SYS_NICE)) { read_unlock(&tasklist_lock); goto out_unlock; } -- cgit v1.2.1 From a8ca8b64e3fdfec17679cba0ca5ce6e3ffed092d Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 11 Jan 2009 18:44:49 +0000 Subject: MIPS: Avoid destructive invalidation on partial cachelines. See discussion e9c3a7c20901051031y528d0d31r18d44c5096c59e0@mail.gmail.com. Signed-off-by: Ralf Baechle --- arch/mips/mm/c-r4k.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 6e99665ae860..c43f4b26a690 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -618,15 +618,35 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size) if (cpu_has_inclusive_pcaches) { if (size >= scache_size) r4k_blast_scache(); - else + else { + unsigned long lsize = cpu_scache_line_size(); + unsigned long almask = ~(lsize - 1); + + /* + * There is no clearly documented alignment requirement + * for the cache instruction on MIPS processors and + * some processors, among them the RM5200 and RM7000 + * QED processors will throw an address error for cache + * hit ops with insufficient alignment. Solved by + * aligning the address to cache line size. + */ + cache_op(Hit_Writeback_Inv_SD, addr & almask); + cache_op(Hit_Writeback_Inv_SD, + (addr + size - 1) & almask); blast_inv_scache_range(addr, addr + size); + } return; } if (cpu_has_safe_index_cacheops && size >= dcache_size) { r4k_blast_dcache(); } else { + unsigned long lsize = cpu_dcache_line_size(); + unsigned long almask = ~(lsize - 1); + R4600_HIT_CACHEOP_WAR_IMPL; + cache_op(Hit_Writeback_Inv_D, addr & almask); + cache_op(Hit_Writeback_Inv_D, (addr + size - 1) & almask); blast_inv_dcache_range(addr, addr + size); } -- cgit v1.2.1 From c7c1e3846bac1e4b8a8941f6a194812e28b0a519 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 12 Jan 2009 00:09:13 +0000 Subject: MIPS: Port "mm: invoke oom-killer from page fault" from UML / x86 Original commit 1c0fe6e3bda0464728c23c8d84aa47567e8b716c. Signed-off-by: Ralf Baechle --- arch/mips/mm/fault.c | 21 ++++++--------------- 1 file changed, 6 insertions(+), 15 deletions(-) diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c index fa636fc6b7b9..55767ad9f00e 100644 --- a/arch/mips/mm/fault.c +++ b/arch/mips/mm/fault.c @@ -97,7 +97,6 @@ good_area: goto bad_area; } -survive: /* * If for any reason at all we couldn't handle the fault, * make sure we exit gracefully rather than endlessly redo @@ -167,21 +166,13 @@ no_context: field, regs->regs[31]); die("Oops", regs); -/* - * We ran out of memory, or some other thing happened to us that made - * us unable to handle the page fault gracefully. - */ out_of_memory: - up_read(&mm->mmap_sem); - if (is_global_init(tsk)) { - yield(); - down_read(&mm->mmap_sem); - goto survive; - } - printk("VM: killing process %s\n", tsk->comm); - if (user_mode(regs)) - do_group_exit(SIGKILL); - goto no_context; + /* + * We ran out of memory, call the OOM killer, and return the userspace + * (which will retry the fault, or kill us if we got oom-killed). + */ + pagefault_out_of_memory(); + return; do_sigbus: up_read(&mm->mmap_sem); -- cgit v1.2.1 From 915ec1e216a5b009ba621b1c5b5be49c85685e53 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 12 Jan 2009 00:52:18 +0000 Subject: MIPS: atomic_*(): Change type of intermediate variables. This shaves of 1912 bytes of an IP27 defconfig kernel and avoids unexpected overflow behaviour in atomic_sub_if_positive. Apply the same changes to the atomic64_* functions for consistency. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/atomic.h | 52 +++++++++++++++++++++--------------------- 1 file changed, 26 insertions(+), 26 deletions(-) diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h index c996c3b4d074..1b332e15ab52 100644 --- a/arch/mips/include/asm/atomic.h +++ b/arch/mips/include/asm/atomic.h @@ -50,7 +50,7 @@ static __inline__ void atomic_add(int i, atomic_t * v) { if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -62,7 +62,7 @@ static __inline__ void atomic_add(int i, atomic_t * v) : "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter)); } else if (cpu_has_llsc) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -95,7 +95,7 @@ static __inline__ void atomic_add(int i, atomic_t * v) static __inline__ void atomic_sub(int i, atomic_t * v) { if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -107,7 +107,7 @@ static __inline__ void atomic_sub(int i, atomic_t * v) : "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter)); } else if (cpu_has_llsc) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -135,12 +135,12 @@ static __inline__ void atomic_sub(int i, atomic_t * v) */ static __inline__ int atomic_add_return(int i, atomic_t * v) { - unsigned long result; + int result; smp_llsc_mb(); if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -154,7 +154,7 @@ static __inline__ int atomic_add_return(int i, atomic_t * v) : "Ir" (i), "m" (v->counter) : "memory"); } else if (cpu_has_llsc) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -187,12 +187,12 @@ static __inline__ int atomic_add_return(int i, atomic_t * v) static __inline__ int atomic_sub_return(int i, atomic_t * v) { - unsigned long result; + int result; smp_llsc_mb(); if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -206,7 +206,7 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v) : "Ir" (i), "m" (v->counter) : "memory"); } else if (cpu_has_llsc) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -247,12 +247,12 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v) */ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v) { - unsigned long result; + int result; smp_llsc_mb(); if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -270,7 +270,7 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v) : "Ir" (i), "m" (v->counter) : "memory"); } else if (cpu_has_llsc) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -429,7 +429,7 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) static __inline__ void atomic64_add(long i, atomic64_t * v) { if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" @@ -441,7 +441,7 @@ static __inline__ void atomic64_add(long i, atomic64_t * v) : "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter)); } else if (cpu_has_llsc) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" @@ -474,7 +474,7 @@ static __inline__ void atomic64_add(long i, atomic64_t * v) static __inline__ void atomic64_sub(long i, atomic64_t * v) { if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" @@ -486,7 +486,7 @@ static __inline__ void atomic64_sub(long i, atomic64_t * v) : "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter)); } else if (cpu_has_llsc) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" @@ -514,12 +514,12 @@ static __inline__ void atomic64_sub(long i, atomic64_t * v) */ static __inline__ long atomic64_add_return(long i, atomic64_t * v) { - unsigned long result; + long result; smp_llsc_mb(); if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" @@ -533,7 +533,7 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v) : "Ir" (i), "m" (v->counter) : "memory"); } else if (cpu_has_llsc) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" @@ -566,12 +566,12 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v) static __inline__ long atomic64_sub_return(long i, atomic64_t * v) { - unsigned long result; + long result; smp_llsc_mb(); if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" @@ -585,7 +585,7 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v) : "Ir" (i), "m" (v->counter) : "memory"); } else if (cpu_has_llsc) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" @@ -626,12 +626,12 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v) */ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v) { - unsigned long result; + long result; smp_llsc_mb(); if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" @@ -649,7 +649,7 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v) : "Ir" (i), "m" (v->counter) : "memory"); } else if (cpu_has_llsc) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" -- cgit v1.2.1 From 2d8965156b79dbfed722804c6036537c81699639 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Thu, 15 Jan 2009 06:56:46 +0800 Subject: MIPS: Octeon: Remove duplicated #includes Signed-off-by: Huang Weiyi Signed-off-by: Ralf Baechle --- arch/mips/cavium-octeon/setup.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index e085feddb4a4..5f4e49ba4713 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -15,13 +15,11 @@ #include #include #include /* for memset */ -#include #include #include #include #include #include -#include #include #include -- cgit v1.2.1 From 732f0462d59721764843783d790a613613287b33 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 28 Jan 2009 14:13:37 +0000 Subject: MIPS: Add return value checks to user_termio_to_kernel_termios() And while at it, convert all functions from macros to inline functions for sanity. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/termios.h | 100 +++++++++++++++++++++++++++++----------- 1 file changed, 72 insertions(+), 28 deletions(-) diff --git a/arch/mips/include/asm/termios.h b/arch/mips/include/asm/termios.h index a275661fa7e1..8f77f774a2a0 100644 --- a/arch/mips/include/asm/termios.h +++ b/arch/mips/include/asm/termios.h @@ -9,6 +9,7 @@ #ifndef _ASM_TERMIOS_H #define _ASM_TERMIOS_H +#include #include #include @@ -94,38 +95,81 @@ struct termio { /* * Translate a "termio" structure into a "termios". Ugh. */ -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - unsigned short tmp; \ - get_user(tmp, &(termio)->c_iflag); \ - (termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \ - get_user(tmp, &(termio)->c_oflag); \ - (termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \ - get_user(tmp, &(termio)->c_cflag); \ - (termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \ - get_user(tmp, &(termio)->c_lflag); \ - (termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \ - get_user((termios)->c_line, &(termio)->c_line); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) +static inline int user_termio_to_kernel_termios(struct ktermios *termios, + struct termio __user *termio) +{ + unsigned short iflag, oflag, cflag, lflag; + unsigned int err; + + if (!access_ok(VERIFY_READ, termio, sizeof(struct termio))) + return -EFAULT; + + err = __get_user(iflag, &termio->c_iflag); + termios->c_iflag = (termios->c_iflag & 0xffff0000) | iflag; + err |=__get_user(oflag, &termio->c_oflag); + termios->c_oflag = (termios->c_oflag & 0xffff0000) | oflag; + err |=__get_user(cflag, &termio->c_cflag); + termios->c_cflag = (termios->c_cflag & 0xffff0000) | cflag; + err |=__get_user(lflag, &termio->c_lflag); + termios->c_lflag = (termios->c_lflag & 0xffff0000) | lflag; + err |=__get_user(termios->c_line, &termio->c_line); + if (err) + return -EFAULT; + + if (__copy_from_user(termios->c_cc, termio->c_cc, NCC)) + return -EFAULT; + + return 0; +} /* * Translate a "termios" structure into a "termio". Ugh. */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) +static inline int kernel_termios_to_user_termio(struct termio __user *termio, + struct ktermios *termios) +{ + int err; + + if (!access_ok(VERIFY_WRITE, termio, sizeof(struct termio))) + return -EFAULT; + + err = __put_user(termios->c_iflag, &termio->c_iflag); + err |= __put_user(termios->c_oflag, &termio->c_oflag); + err |= __put_user(termios->c_cflag, &termio->c_cflag); + err |= __put_user(termios->c_lflag, &termio->c_lflag); + err |= __put_user(termios->c_line, &termio->c_line); + if (err) + return -EFAULT; + + if (__copy_to_user(termio->c_cc, termios->c_cc, NCC)) + return -EFAULT; + + return 0; +} + +static inline int user_termios_to_kernel_termios(struct ktermios __user *k, + struct termios2 *u) +{ + return copy_from_user(k, u, sizeof(struct termios2)) ? -EFAULT : 0; +} + +static inline int kernel_termios_to_user_termios(struct termios2 __user *u, + struct ktermios *k) +{ + return copy_to_user(u, k, sizeof(struct termios2)) ? -EFAULT : 0; +} + +static inline int user_termios_to_kernel_termios_1(struct ktermios *k, + struct termios __user *u) +{ + return copy_from_user(k, u, sizeof(struct termios)) ? -EFAULT : 0; +} + +static inline int kernel_termios_to_user_termios_1(struct termios __user *u, + struct ktermios *k) +{ + return copy_to_user(u, k, sizeof(struct termios)) ? -EFAULT : 0; +} #endif /* defined(__KERNEL__) */ -- cgit v1.2.1 From 634286f127bef8799cd04799d3e1d5471e8fd91c Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 28 Jan 2009 17:48:40 +0000 Subject: MIPS: IP27: Switch from DMA_IP27 to DMA_COHERENT The special IP27 DMA code selected by DMA_IP27 has been removed a while ago turning DMA_IP27 into almost a nop. Also fixup the broken logic of its last users memcpy.S and memcpy-inatomic.s. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 5 +---- arch/mips/configs/ip27_defconfig | 2 +- arch/mips/lib/memcpy-inatomic.S | 2 +- arch/mips/lib/memcpy.S | 2 +- 4 files changed, 4 insertions(+), 7 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 52c80c2a57f2..71e8ebd8ed0b 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -351,7 +351,7 @@ config SGI_IP27 select ARC64 select BOOT_ELF64 select DEFAULT_SGI_PARTITION - select DMA_IP27 + select DMA_COHERENT select SYS_HAS_EARLY_PRINTK select HW_HAS_PCI select NR_CPUS_DEFAULT_64 @@ -761,9 +761,6 @@ config CFE config DMA_COHERENT bool -config DMA_IP27 - bool - config DMA_NONCOHERENT bool select DMA_NEED_PCI_MAP_STATE diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index 34ea319be94c..f2baea3039bb 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -53,7 +53,7 @@ CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_ARC=y -CONFIG_DMA_IP27=y +CONFIG_DMA_COHERENT=y CONFIG_EARLY_PRINTK=y CONFIG_SYS_HAS_EARLY_PRINTK=y # CONFIG_NO_IOPORT is not set diff --git a/arch/mips/lib/memcpy-inatomic.S b/arch/mips/lib/memcpy-inatomic.S index 736d0fb56a94..68853a038d3f 100644 --- a/arch/mips/lib/memcpy-inatomic.S +++ b/arch/mips/lib/memcpy-inatomic.S @@ -21,7 +21,7 @@ * end of memory on some systems. It's also a seriously bad idea on non * dma-coherent systems. */ -#if !defined(CONFIG_DMA_COHERENT) || !defined(CONFIG_DMA_IP27) +#ifdef CONFIG_DMA_NONCOHERENT #undef CONFIG_CPU_HAS_PREFETCH #endif #ifdef CONFIG_MIPS_MALTA diff --git a/arch/mips/lib/memcpy.S b/arch/mips/lib/memcpy.S index c06cccf60bec..56a1f85a1ce8 100644 --- a/arch/mips/lib/memcpy.S +++ b/arch/mips/lib/memcpy.S @@ -21,7 +21,7 @@ * end of memory on some systems. It's also a seriously bad idea on non * dma-coherent systems. */ -#if !defined(CONFIG_DMA_COHERENT) || !defined(CONFIG_DMA_IP27) +#ifdef CONFIG_DMA_NONCOHERENT #undef CONFIG_CPU_HAS_PREFETCH #endif #ifdef CONFIG_MIPS_MALTA -- cgit v1.2.1 From 42fe7ee31ff904b2419f02864938966c8f0b6edc Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 28 Jan 2009 18:48:23 +0000 Subject: MIPS: R2: Fix broken installation of cache error handler. Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index f6083c6bfaa4..fa06460cbf2c 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1582,7 +1582,11 @@ void __init set_handler(unsigned long offset, void *addr, unsigned long size) static char panic_null_cerr[] __cpuinitdata = "Trying to set NULL cache error exception handler"; -/* Install uncached CPU exception handler */ +/* + * Install uncached CPU exception handler. + * This is suitable only for the cache error exception which is the only + * exception handler that is being run uncached. + */ void __cpuinit set_uncached_handler(unsigned long offset, void *addr, unsigned long size) { @@ -1593,7 +1597,7 @@ void __cpuinit set_uncached_handler(unsigned long offset, void *addr, unsigned long uncached_ebase = TO_UNCAC(ebase); #endif if (cpu_has_mips_r2) - ebase += (read_c0_ebase() & 0x3ffff000); + uncached_ebase += (read_c0_ebase() & 0x3ffff000); if (!addr) panic(panic_null_cerr); -- cgit v1.2.1 From 65655b5a94f6fc7e6450e3e07f2687c523c71c08 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 20 Jan 2009 23:07:41 +0900 Subject: MIPS: TXx9: Add support for TX4939 internal RTC Add platform support to use rtc-tx4939 driver. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/include/asm/txx9/tx4939.h | 1 + arch/mips/txx9/generic/setup_tx4939.c | 22 ++++++++++++++++++++++ arch/mips/txx9/rbtx4939/setup.c | 1 + 3 files changed, 24 insertions(+) diff --git a/arch/mips/include/asm/txx9/tx4939.h b/arch/mips/include/asm/txx9/tx4939.h index 88badb423010..964ef7ede268 100644 --- a/arch/mips/include/asm/txx9/tx4939.h +++ b/arch/mips/include/asm/txx9/tx4939.h @@ -541,5 +541,6 @@ void tx4939_irq_init(void); int tx4939_irq(void); void tx4939_mtd_init(int ch); void tx4939_ata_init(void); +void tx4939_rtc_init(void); #endif /* __ASM_TXX9_TX4939_H */ diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c index 6c0049a5bbc1..55440967b3a8 100644 --- a/arch/mips/txx9/generic/setup_tx4939.c +++ b/arch/mips/txx9/generic/setup_tx4939.c @@ -435,6 +435,28 @@ void __init tx4939_ata_init(void) platform_device_register(&ata1_dev); } +void __init tx4939_rtc_init(void) +{ + static struct resource res[] = { + { + .start = TX4939_RTC_REG & 0xfffffffffULL, + .end = (TX4939_RTC_REG & 0xfffffffffULL) + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = TXX9_IRQ_BASE + TX4939_IR_RTC, + .flags = IORESOURCE_IRQ, + }, + }; + static struct platform_device rtc_dev = { + .name = "tx4939rtc", + .id = -1, + .num_resources = ARRAY_SIZE(res), + .resource = res, + }; + + platform_device_register(&rtc_dev); +} + static void __init tx4939_stop_unused_modules(void) { __u64 pcfg, rst = 0, ckd = 0; diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c index 98fbd9391bf8..656603b85b71 100644 --- a/arch/mips/txx9/rbtx4939/setup.c +++ b/arch/mips/txx9/rbtx4939/setup.c @@ -336,6 +336,7 @@ static void __init rbtx4939_device_init(void) rbtx4939_led_setup(); tx4939_wdt_init(); tx4939_ata_init(); + tx4939_rtc_init(); } static void __init rbtx4939_setup(void) -- cgit v1.2.1 From 7adbedaf4469dcdcd6a1ab9bdeb8ad854d4f9827 Mon Sep 17 00:00:00 2001 From: David Daney Date: Wed, 24 Dec 2008 15:44:26 -0800 Subject: MIPS: Fix a typo in watchpoint register structure. This fixes the ptrace ABI for watch registers, and should allow 64bit kernels to use the watch register support. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/include/asm/ptrace.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h index 1f30d16d4669..ce47118e52b7 100644 --- a/arch/mips/include/asm/ptrace.h +++ b/arch/mips/include/asm/ptrace.h @@ -105,7 +105,7 @@ struct pt_watch_regs { enum pt_watch_style style; union { struct mips32_watch_regs mips32; - struct mips32_watch_regs mips64; + struct mips64_watch_regs mips64; }; }; -- cgit v1.2.1 From 8bc6d05b481aa7dc79c81b8ffac0da755e149643 Mon Sep 17 00:00:00 2001 From: David Daney Date: Mon, 5 Jan 2009 15:29:58 -0800 Subject: MIPS: Read watch registers with interrupts disabled. If a context switch occurred between the watch exception and reading the watch registers, it would be possible for the new process to corrupt their state. Enabling interrupts only after the watch registers are read avoids this race. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/kernel/genex.S | 6 +++++- arch/mips/kernel/traps.c | 8 +++++++- 2 files changed, 12 insertions(+), 2 deletions(-) diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index fb6f73148df2..8882e5766f27 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -458,7 +458,11 @@ NESTED(nmi_handler, PT_SIZE, sp) BUILD_HANDLER fpe fpe fpe silent /* #15 */ BUILD_HANDLER mdmx mdmx sti silent /* #22 */ #ifdef CONFIG_HARDWARE_WATCHPOINTS - BUILD_HANDLER watch watch sti silent /* #23 */ + /* + * For watch, interrupts will be enabled after the watch + * registers are read. + */ + BUILD_HANDLER watch watch cli silent /* #23 */ #else BUILD_HANDLER watch watch sti verbose /* #23 */ #endif diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index fa06460cbf2c..b2d7041341b8 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -944,6 +944,9 @@ asmlinkage void do_mdmx(struct pt_regs *regs) force_sig(SIGILL, current); } +/* + * Called with interrupts disabled. + */ asmlinkage void do_watch(struct pt_regs *regs) { u32 cause; @@ -963,9 +966,12 @@ asmlinkage void do_watch(struct pt_regs *regs) */ if (test_tsk_thread_flag(current, TIF_LOAD_WATCH)) { mips_read_watch_registers(); + local_irq_enable(); force_sig(SIGTRAP, current); - } else + } else { mips_clear_watch_registers(); + local_irq_enable(); + } } asmlinkage void do_mcheck(struct pt_regs *regs) -- cgit v1.2.1 From f839490ab42a471f0b0a4b795df77a1af924fe05 Mon Sep 17 00:00:00 2001 From: David Daney Date: Mon, 5 Jan 2009 15:29:14 -0800 Subject: MIPS: Use hardware watchpoints on all R1 and R2 CPUs. The previous definition inadvertently omits Octeon which currently is treated as an architecture variant separate from MIPS32 and MIPS64. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 71e8ebd8ed0b..600eef3f3ac7 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1365,7 +1365,7 @@ config CPU_SUPPORTS_64BIT_KERNEL # config HARDWARE_WATCHPOINTS bool - default y if CPU_MIPS32 || CPU_MIPS64 + default y if CPU_MIPSR1 || CPU_MIPSR2 menu "Kernel type" -- cgit v1.2.1 From 5379a5fdf3cb2b23d00da2a1298167f9a1fb002a Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Wed, 12 Nov 2008 00:09:30 +0100 Subject: MIPS: RB532: Fix bit swapping in rb532_set_bit() The algorithm works unconditionally. If bitval is one, the first line is a no op and the second line sets the bit at offset position. Vice versa, if bitval is zero, the first line clears the bit at offset position and the second line is a no op. Signed-off-by: Phil Sutter Signed-off-by: Ralf Baechle --- arch/mips/rb532/gpio.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c index 0e84c8ab6a39..e35cb75a3ae7 100644 --- a/arch/mips/rb532/gpio.c +++ b/arch/mips/rb532/gpio.c @@ -119,13 +119,11 @@ static inline void rb532_set_bit(unsigned bitval, unsigned long flags; u32 val; - bitval = !!bitval; /* map parameter to {0,1} */ - local_irq_save(flags); val = readl(ioaddr); - val &= ~( ~bitval << offset ); /* unset bit if bitval == 0 */ - val |= ( bitval << offset ); /* set bit if bitval == 1 */ + val &= ~(!bitval << offset); /* unset bit if bitval == 0 */ + val |= (!!bitval << offset); /* set bit if bitval == 1 */ writel(val, ioaddr); local_irq_restore(flags); -- cgit v1.2.1 From fb91e2cb7d3d44356bb92411d6d6b7cb51ce156c Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Wed, 12 Nov 2008 00:16:04 +0100 Subject: MIPS: RC32434: Define io_map_base for PCI controller The code is rather based on trial-and-error than knowledge. Verified Via Rhine functionality in PIO as well as MMIO mode. [Looks sane -- Ralf] Signed-off-by: Phil Sutter Tested-by: Florian Fainelli Signed-off-by: Ralf Baechle --- arch/mips/pci/pci-rc32434.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/mips/pci/pci-rc32434.c b/arch/mips/pci/pci-rc32434.c index 1c2821e2f494..71f7d27b0d4c 100644 --- a/arch/mips/pci/pci-rc32434.c +++ b/arch/mips/pci/pci-rc32434.c @@ -205,6 +205,8 @@ static int __init rc32434_pcibridge_init(void) static int __init rc32434_pci_init(void) { + void __iomem *io_map_base; + pr_info("PCI: Initializing PCI\n"); ioport_resource.start = rc32434_res_pci_io1.start; @@ -212,6 +214,15 @@ static int __init rc32434_pci_init(void) rc32434_pcibridge_init(); + io_map_base = ioremap(rc32434_res_pci_io1.start, + rc32434_res_pci_io1.end - rc32434_res_pci_io1.start + 1); + + if (!io_map_base) + return -ENOMEM; + + rc32434_controller.io_map_base = + (unsigned long)io_map_base - rc32434_res_pci_io1.start; + register_pci_controller(&rc32434_controller); rc32434_sync(); -- cgit v1.2.1 From 4aa0f4d7264bc4f54603de5db1ffcaf8912ddd23 Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Fri, 28 Nov 2008 20:45:10 +0100 Subject: MIPS: RB532: Add set_type() function to IRQ struct. Interrupt Group 4 mapps the GPIO pins enabled as interrupt sources; add defines to make this clear when addressing them later in code. The mapped GPIOs support triggering on either level high or low. To achieve this, the set_type() function calls rb532_gpio_set_ilevel() for interrupts of the above mentioned group. As there is no way to alter the triggering characteristics of the other interrupts, accept level triggering on status high only. (This is just a guess; but as the system boots fine and interrupt-driven devices (e.g. serial console) work with no implications, it seems to be right.) To clear a GPIO mapped IRQ, the source has to be cleared (i.e., the interrupt status bit of the corresponding GPIO pin). This is done inside rb532_disable_irq(). After applying these changes I could undo most of my former "fixes" to pata-rb532-cf. Particularly all interrupt handling can be done generically via set_irq_type() as it was before. Signed-off-by: Phil Sutter Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-rc32434/irq.h | 3 +++ arch/mips/rb532/irq.c | 27 +++++++++++++++++++++++++++ 2 files changed, 30 insertions(+) diff --git a/arch/mips/include/asm/mach-rc32434/irq.h b/arch/mips/include/asm/mach-rc32434/irq.h index 56738d8ec4e2..023a5b100ed0 100644 --- a/arch/mips/include/asm/mach-rc32434/irq.h +++ b/arch/mips/include/asm/mach-rc32434/irq.h @@ -30,4 +30,7 @@ #define ETH0_RX_OVR_IRQ (GROUP3_IRQ_BASE + 9) #define ETH0_TX_UND_IRQ (GROUP3_IRQ_BASE + 10) +#define GPIO_MAPPED_IRQ_BASE GROUP4_IRQ_BASE +#define GPIO_MAPPED_IRQ_GROUP 4 + #endif /* __ASM_RC32434_IRQ_H */ diff --git a/arch/mips/rb532/irq.c b/arch/mips/rb532/irq.c index 549b46d2fcee..53eeb5e7bc5b 100644 --- a/arch/mips/rb532/irq.c +++ b/arch/mips/rb532/irq.c @@ -46,6 +46,7 @@ #include #include +#include struct intr_group { u32 mask; /* mask of valid bits in pending/mask registers */ @@ -150,6 +151,9 @@ static void rb532_disable_irq(unsigned int irq_nr) mask |= intr_bit; WRITE_MASK(addr, mask); + if (group == GPIO_MAPPED_IRQ_GROUP) + rb532_gpio_set_istat(0, irq_nr - GPIO_MAPPED_IRQ_BASE); + /* * if there are no more interrupts enabled in this * group, disable corresponding IP @@ -165,12 +169,35 @@ static void rb532_mask_and_ack_irq(unsigned int irq_nr) ack_local_irq(group_to_ip(irq_to_group(irq_nr))); } +static int rb532_set_type(unsigned int irq_nr, unsigned type) +{ + int gpio = irq_nr - GPIO_MAPPED_IRQ_BASE; + int group = irq_to_group(irq_nr); + + if (group != GPIO_MAPPED_IRQ_GROUP) + return (type == IRQ_TYPE_LEVEL_HIGH) ? 0 : -EINVAL; + + switch (type) { + case IRQ_TYPE_LEVEL_HIGH: + rb532_gpio_set_ilevel(1, gpio); + break; + case IRQ_TYPE_LEVEL_LOW: + rb532_gpio_set_ilevel(0, gpio); + break; + default: + return -EINVAL; + } + + return 0; +} + static struct irq_chip rc32434_irq_type = { .name = "RB532", .ack = rb532_disable_irq, .mask = rb532_disable_irq, .mask_ack = rb532_mask_and_ack_irq, .unmask = rb532_enable_irq, + .set_type = rb532_set_type, }; void __init arch_init_irq(void) -- cgit v1.2.1 From 33763d571da995913299cd0509425decfa9e4be0 Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Fri, 28 Nov 2008 20:46:09 +0100 Subject: MIPS: RB532: Auto disable GPIO alternate function When a driver calls gpio_set_direction_{input,output}(), it obviously doesn't want the alternate function for that pin to be active (as the direction would not matter in that case). This patch ensures alternate function is disabled when the direction is being changed. Signed-off-by: Phil Sutter Signed-off-by: Ralf Baechle --- arch/mips/rb532/gpio.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c index e35cb75a3ae7..f5b15a17432f 100644 --- a/arch/mips/rb532/gpio.c +++ b/arch/mips/rb532/gpio.c @@ -169,8 +169,8 @@ static int rb532_gpio_direction_input(struct gpio_chip *chip, unsigned offset) gpch = container_of(chip, struct rb532_gpio_chip, chip); - if (rb532_get_bit(offset, gpch->regbase + GPIOFUNC)) - return 1; /* alternate function, GPIOCFG is ignored */ + /* disable alternate function in case it's set */ + rb532_set_bit(0, offset, gpch->regbase + GPIOFUNC); rb532_set_bit(0, offset, gpch->regbase + GPIOCFG); return 0; @@ -186,8 +186,8 @@ static int rb532_gpio_direction_output(struct gpio_chip *chip, gpch = container_of(chip, struct rb532_gpio_chip, chip); - if (rb532_get_bit(offset, gpch->regbase + GPIOFUNC)) - return 1; /* alternate function, GPIOCFG is ignored */ + /* disable alternate function in case it's set */ + rb532_set_bit(0, offset, gpch->regbase + GPIOFUNC); /* set the initial output value */ rb532_set_bit(value, offset, gpch->regbase + GPIOD); -- cgit v1.2.1 From 84c2c562c101bd84ea0f796b9838296da1bf859e Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Fri, 28 Nov 2008 20:46:22 +0100 Subject: MIPS: RB532: remove useless CF GPIO initialisation As the pata-rb532-cf driver calls gpio_direction_input(), the calls to rb532_gpio_set_func() and rb532_gpio_direction_input() are not needed since the alternate function is automatically being disabled when changing the GPIO pin direction. The later two calls to rb532_gpio_set_{ilevel,istat}() are implicitly being done by the IRQ initialisation of pata-rb532-cf. Signed-off-by: Phil Sutter Signed-off-by: Ralf Baechle --- arch/mips/rb532/gpio.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c index f5b15a17432f..b195f797c438 100644 --- a/arch/mips/rb532/gpio.c +++ b/arch/mips/rb532/gpio.c @@ -259,12 +259,6 @@ int __init rb532_gpio_init(void) return -ENXIO; } - /* configure CF_GPIO_NUM as CFRDY IRQ source */ - rb532_gpio_set_func(0, CF_GPIO_NUM); - rb532_gpio_direction_input(&rb532_gpio_chip->chip, CF_GPIO_NUM); - rb532_gpio_set_ilevel(1, CF_GPIO_NUM); - rb532_gpio_set_istat(0, CF_GPIO_NUM); - return 0; } arch_initcall(rb532_gpio_init); -- cgit v1.2.1 From 1452fc7d178c37c6463c95c5cc6858c7b7f478c8 Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Thu, 15 Jan 2009 15:38:38 +0100 Subject: MIPS: RB532: Detect uart type, add platform device Auto-detection works just fine, so use it instead of specifying the type manually. Also define a platform device for the uart, as suggested by David Daney. Signed-off-by: Phil Sutter Signed-off-by: Ralf Baechle --- arch/mips/rb532/devices.c | 26 ++++++++++++++++++++++++++ arch/mips/rb532/serial.c | 2 +- 2 files changed, 27 insertions(+), 1 deletion(-) diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c index c1c29181bd46..9b6b744d8ecc 100644 --- a/arch/mips/rb532/devices.c +++ b/arch/mips/rb532/devices.c @@ -24,6 +24,7 @@ #include #include #include +#include #include @@ -39,6 +40,8 @@ #define ETH0_RX_DMA_ADDR (DMA0_BASE_ADDR + 0 * DMA_CHAN_OFFSET) #define ETH0_TX_DMA_ADDR (DMA0_BASE_ADDR + 1 * DMA_CHAN_OFFSET) +extern unsigned int idt_cpu_freq; + static struct resource korina_dev0_res[] = { { .name = "korina_regs", @@ -214,12 +217,32 @@ static struct platform_device rb532_wdt = { .num_resources = ARRAY_SIZE(rb532_wdt_res), }; +static struct plat_serial8250_port rb532_uart_res[] = { + { + .membase = (char *)KSEG1ADDR(REGBASE + UART0BASE), + .irq = UART0_IRQ, + .regshift = 2, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF, + }, + { + .flags = 0, + } +}; + +static struct platform_device rb532_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = &rb532_uart_res, +}; + static struct platform_device *rb532_devs[] = { &korina_dev0, &nand_slot0, &cf_slot0, &rb532_led, &rb532_button, + &rb532_uart, &rb532_wdt }; @@ -294,6 +317,9 @@ static int __init plat_setup_devices(void) /* Initialise the NAND device */ rb532_nand_setup(); + /* set the uart clock to the current cpu frequency */ + rb532_uart_res[0].uartclk = idt_cpu_freq; + return platform_add_devices(rb532_devs, ARRAY_SIZE(rb532_devs)); } diff --git a/arch/mips/rb532/serial.c b/arch/mips/rb532/serial.c index 3e0d7ec3a579..00ed19f0bdb5 100644 --- a/arch/mips/rb532/serial.c +++ b/arch/mips/rb532/serial.c @@ -36,7 +36,7 @@ extern unsigned int idt_cpu_freq; static struct uart_port rb532_uart = { - .type = PORT_16550A, + .flags = UPF_BOOT_AUTOCONF, .line = 0, .irq = UART0_IRQ, .iotype = UPIO_MEM, -- cgit v1.2.1 From 94d2cc1b8b2bd2141e141a4f43bce9ab135bd9fd Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Thu, 15 Jan 2009 15:41:44 +0100 Subject: MIPS: RB532: Use driver_data instead of platform_data As the korina ethernet driver uses platform_get_drvdata() to extract the driver specific data from the platform device, driver_data has to be used here. Signed-off-by: Phil Sutter Signed-off-by: Ralf Baechle --- arch/mips/rb532/devices.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c index 9b6b744d8ecc..3c74561b4ee5 100644 --- a/arch/mips/rb532/devices.c +++ b/arch/mips/rb532/devices.c @@ -89,7 +89,7 @@ static struct korina_device korina_dev0_data = { static struct platform_device korina_dev0 = { .id = -1, .name = "korina", - .dev.platform_data = &korina_dev0_data, + .dev.driver_data = &korina_dev0_data, .resource = korina_dev0_res, .num_resources = ARRAY_SIZE(korina_dev0_res), }; -- cgit v1.2.1 From deb1003329b65456c4e6702cd3bcc698d565a11e Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Mon, 19 Jan 2009 23:42:50 +0100 Subject: MIPS: RB532: Fix init of rb532_dev3_ctl_res This register just contains the address of the actual resource, so initialisation has to be the same as cf_slot0_res and nand_slot0_res. Signed-off-by: Phil Sutter Signed-off-by: Ralf Baechle --- arch/mips/rb532/gpio.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c index b195f797c438..2f2cb8dc6531 100644 --- a/arch/mips/rb532/gpio.c +++ b/arch/mips/rb532/gpio.c @@ -55,8 +55,6 @@ static struct resource rb532_gpio_reg0_res[] = { static struct resource rb532_dev3_ctl_res[] = { { .name = "dev3_ctl", - .start = REGBASE + DEV3BASE, - .end = REGBASE + DEV3BASE + sizeof(struct dev_reg) - 1, .flags = IORESOURCE_MEM, } }; @@ -251,6 +249,9 @@ int __init rb532_gpio_init(void) /* Register our GPIO chip */ gpiochip_add(&rb532_gpio_chip->chip); + rb532_dev3_ctl_res[0].start = readl(IDT434_REG_BASE + DEV3BASE); + rb532_dev3_ctl_res[0].end = rb532_dev3_ctl_res[0].start + 0x1000; + r = rb532_dev3_ctl_res; dev3.base = ioremap_nocache(r->start, r->end - r->start); -- cgit v1.2.1 From 7060886fb745b705bcf189131eb49c50485ba233 Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Mon, 19 Jan 2009 23:42:51 +0100 Subject: MIPS: RB532: Fix set_latch_u5() The data to be written is just a byte, so use writeb instead of writel. Also, dev3.base contains the address, not the data so referencing here is wrong. Signed-off-by: Phil Sutter Signed-off-by: Ralf Baechle --- arch/mips/rb532/gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c index 2f2cb8dc6531..be977a4c2f9c 100644 --- a/arch/mips/rb532/gpio.c +++ b/arch/mips/rb532/gpio.c @@ -93,7 +93,7 @@ void set_latch_u5(unsigned char or_mask, unsigned char nand_mask) spin_lock_irqsave(&dev3.lock, flags); dev3.state = (dev3.state | or_mask) & ~nand_mask; - writel(dev3.state, &dev3.base); + writeb(dev3.state, dev3.base); spin_unlock_irqrestore(&dev3.lock, flags); } -- cgit v1.2.1 From 36f2db4b9c01689b1311d57a6297022d82000185 Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Mon, 19 Jan 2009 23:42:52 +0100 Subject: MIPS: RB532: Move dev3 init code to devices.c This code doesn't belong to gpio.c, as it's completely unrelated to GPIO. As dev1 and dev2 init code is in devices.c, it seems to be a more adequate place. Signed-off-by: Phil Sutter Signed-off-by: Ralf Baechle --- arch/mips/rb532/devices.c | 39 +++++++++++++++++++++++++++++++++++++++ arch/mips/rb532/gpio.c | 39 --------------------------------------- 2 files changed, 39 insertions(+), 39 deletions(-) diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c index 3c74561b4ee5..1a0209eca789 100644 --- a/arch/mips/rb532/devices.c +++ b/arch/mips/rb532/devices.c @@ -42,6 +42,34 @@ extern unsigned int idt_cpu_freq; +static struct mpmc_device dev3; + +void set_latch_u5(unsigned char or_mask, unsigned char nand_mask) +{ + unsigned long flags; + + spin_lock_irqsave(&dev3.lock, flags); + + dev3.state = (dev3.state | or_mask) & ~nand_mask; + writeb(dev3.state, dev3.base); + + spin_unlock_irqrestore(&dev3.lock, flags); +} +EXPORT_SYMBOL(set_latch_u5); + +unsigned char get_latch_u5(void) +{ + return dev3.state; +} +EXPORT_SYMBOL(get_latch_u5); + +static struct resource rb532_dev3_ctl_res[] = { + { + .name = "dev3_ctl", + .flags = IORESOURCE_MEM, + } +}; + static struct resource korina_dev0_res[] = { { .name = "korina_regs", @@ -314,6 +342,17 @@ static int __init plat_setup_devices(void) nand_slot0_res[0].start = readl(IDT434_REG_BASE + DEV2BASE); nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000; + /* Read the third (multi purpose) resources from the DC */ + rb532_dev3_ctl_res[0].start = readl(IDT434_REG_BASE + DEV3BASE); + rb532_dev3_ctl_res[0].end = rb532_dev3_ctl_res[0].start + 0x1000; + + dev3.base = ioremap_nocache(rb532_dev3_ctl_res[0].start, 0x1000); + + if (!dev3.base) { + printk(KERN_ERR "rb532: cannot remap device controller 3\n"); + return -ENXIO; + } + /* Initialise the NAND device */ rb532_nand_setup(); diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c index be977a4c2f9c..6229173946ad 100644 --- a/arch/mips/rb532/gpio.c +++ b/arch/mips/rb532/gpio.c @@ -41,8 +41,6 @@ struct rb532_gpio_chip { void __iomem *regbase; }; -struct mpmc_device dev3; - static struct resource rb532_gpio_reg0_res[] = { { .name = "gpio_reg0", @@ -52,13 +50,6 @@ static struct resource rb532_gpio_reg0_res[] = { } }; -static struct resource rb532_dev3_ctl_res[] = { - { - .name = "dev3_ctl", - .flags = IORESOURCE_MEM, - } -}; - void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val) { unsigned long flags; @@ -86,25 +77,6 @@ unsigned get_434_reg(unsigned reg_offs) } EXPORT_SYMBOL(get_434_reg); -void set_latch_u5(unsigned char or_mask, unsigned char nand_mask) -{ - unsigned long flags; - - spin_lock_irqsave(&dev3.lock, flags); - - dev3.state = (dev3.state | or_mask) & ~nand_mask; - writeb(dev3.state, dev3.base); - - spin_unlock_irqrestore(&dev3.lock, flags); -} -EXPORT_SYMBOL(set_latch_u5); - -unsigned char get_latch_u5(void) -{ - return dev3.state; -} -EXPORT_SYMBOL(get_latch_u5); - /* rb532_set_bit - sanely set a bit * * bitval: new value for the bit @@ -249,17 +221,6 @@ int __init rb532_gpio_init(void) /* Register our GPIO chip */ gpiochip_add(&rb532_gpio_chip->chip); - rb532_dev3_ctl_res[0].start = readl(IDT434_REG_BASE + DEV3BASE); - rb532_dev3_ctl_res[0].end = rb532_dev3_ctl_res[0].start + 0x1000; - - r = rb532_dev3_ctl_res; - dev3.base = ioremap_nocache(r->start, r->end - r->start); - - if (!dev3.base) { - printk(KERN_ERR "rb532: cannot remap device controller 3\n"); - return -ENXIO; - } - return 0; } arch_initcall(rb532_gpio_init); -- cgit v1.2.1 From 4ca3803f81bca9081f17ef67ffca8b11790f608d Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Mon, 19 Jan 2009 23:42:53 +0100 Subject: MIPS: RB532: Remove {get,set}_434_reg() These kernel symbols are unused. Also, since dev3 init has been moved to devices.c, set_434_reg() breaks compiling as it uses dev3. Signed-off-by: Phil Sutter Signed-off-by: Ralf Baechle --- arch/mips/rb532/gpio.c | 27 --------------------------- 1 file changed, 27 deletions(-) diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c index 6229173946ad..f33868159826 100644 --- a/arch/mips/rb532/gpio.c +++ b/arch/mips/rb532/gpio.c @@ -50,33 +50,6 @@ static struct resource rb532_gpio_reg0_res[] = { } }; -void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val) -{ - unsigned long flags; - unsigned data; - unsigned i = 0; - - spin_lock_irqsave(&dev3.lock, flags); - - data = readl(IDT434_REG_BASE + reg_offs); - for (i = 0; i != len; ++i) { - if (val & (1 << i)) - data |= (1 << (i + bit)); - else - data &= ~(1 << (i + bit)); - } - writel(data, (IDT434_REG_BASE + reg_offs)); - - spin_unlock_irqrestore(&dev3.lock, flags); -} -EXPORT_SYMBOL(set_434_reg); - -unsigned get_434_reg(unsigned reg_offs) -{ - return readl(IDT434_REG_BASE + reg_offs); -} -EXPORT_SYMBOL(get_434_reg); - /* rb532_set_bit - sanely set a bit * * bitval: new value for the bit -- cgit v1.2.1 From 1c4db8e82808a804751be906e8c14bbe0a264a9c Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Mon, 19 Jan 2009 23:42:54 +0100 Subject: MIPS: RB532: Simplify dev3 init As rb532_dev3_ctl_res is not used by any platform device, it can be dropped when not used for holding the physical address of the device 3 controller. Also a size of one byte should suffice when ioremapping the physical address mentioned above, as only a single byte is being read from and written to it. Signed-off-by: Phil Sutter Signed-off-by: Ralf Baechle --- arch/mips/rb532/devices.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c index 1a0209eca789..4a5f05b662ae 100644 --- a/arch/mips/rb532/devices.c +++ b/arch/mips/rb532/devices.c @@ -63,13 +63,6 @@ unsigned char get_latch_u5(void) } EXPORT_SYMBOL(get_latch_u5); -static struct resource rb532_dev3_ctl_res[] = { - { - .name = "dev3_ctl", - .flags = IORESOURCE_MEM, - } -}; - static struct resource korina_dev0_res[] = { { .name = "korina_regs", @@ -342,11 +335,8 @@ static int __init plat_setup_devices(void) nand_slot0_res[0].start = readl(IDT434_REG_BASE + DEV2BASE); nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000; - /* Read the third (multi purpose) resources from the DC */ - rb532_dev3_ctl_res[0].start = readl(IDT434_REG_BASE + DEV3BASE); - rb532_dev3_ctl_res[0].end = rb532_dev3_ctl_res[0].start + 0x1000; - - dev3.base = ioremap_nocache(rb532_dev3_ctl_res[0].start, 0x1000); + /* Read and map device controller 3 */ + dev3.base = ioremap_nocache(readl(IDT434_REG_BASE + DEV3BASE), 1); if (!dev3.base) { printk(KERN_ERR "rb532: cannot remap device controller 3\n"); -- cgit v1.2.1 From 3828ee047d3c8e0d0e8e9f4d738bd8593220299a Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Thu, 22 Jan 2009 19:28:50 +0100 Subject: MIPS: RB532: Update headers Remove the {set,get}_434_reg() prototypes, as the functions have been removed. Also move the prototypes for {get,set}_latch_u5() to the correct place. Signed-off-by: Phil Sutter Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-rc32434/gpio.h | 4 ---- arch/mips/include/asm/mach-rc32434/rb.h | 3 +++ 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/arch/mips/include/asm/mach-rc32434/gpio.h b/arch/mips/include/asm/mach-rc32434/gpio.h index b5cf6457305a..ca92c81f4067 100644 --- a/arch/mips/include/asm/mach-rc32434/gpio.h +++ b/arch/mips/include/asm/mach-rc32434/gpio.h @@ -80,10 +80,6 @@ struct rb532_gpio_reg { /* Compact Flash GPIO pin */ #define CF_GPIO_NUM 13 -extern void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val); -extern unsigned get_434_reg(unsigned reg_offs); -extern void set_latch_u5(unsigned char or_mask, unsigned char nand_mask); -extern unsigned char get_latch_u5(void); extern void rb532_gpio_set_ilevel(int bit, unsigned gpio); extern void rb532_gpio_set_istat(int bit, unsigned gpio); diff --git a/arch/mips/include/asm/mach-rc32434/rb.h b/arch/mips/include/asm/mach-rc32434/rb.h index f25a84916703..6dc5f8df1f3e 100644 --- a/arch/mips/include/asm/mach-rc32434/rb.h +++ b/arch/mips/include/asm/mach-rc32434/rb.h @@ -83,4 +83,7 @@ struct mpmc_device { void __iomem *base; }; +extern void set_latch_u5(unsigned char or_mask, unsigned char nand_mask); +extern unsigned char get_latch_u5(void); + #endif /* __ASM_RC32434_RB_H */ -- cgit v1.2.1 From 0fc6bc0d6e953f6dd80c286c889d8d581e8f8d7a Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Thu, 22 Jan 2009 19:32:43 +0100 Subject: MIPS: RB532: Export rb532_gpio_set_func() This kernel symbol provides a way for drivers to switch on alternate function for a certain GPIO pin. Turning it off is done implicitly when changing the GPIO direction, as that would be fixed when using the given pin als alternate function. Signed-off-by: Phil Sutter Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-rc32434/gpio.h | 1 + arch/mips/rb532/gpio.c | 5 +++-- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/mips/include/asm/mach-rc32434/gpio.h b/arch/mips/include/asm/mach-rc32434/gpio.h index ca92c81f4067..3cb50d17b62d 100644 --- a/arch/mips/include/asm/mach-rc32434/gpio.h +++ b/arch/mips/include/asm/mach-rc32434/gpio.h @@ -82,5 +82,6 @@ struct rb532_gpio_reg { extern void rb532_gpio_set_ilevel(int bit, unsigned gpio); extern void rb532_gpio_set_istat(int bit, unsigned gpio); +extern void rb532_gpio_set_func(unsigned gpio); #endif /* _RC32434_GPIO_H_ */ diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c index f33868159826..37de05d595e7 100644 --- a/arch/mips/rb532/gpio.c +++ b/arch/mips/rb532/gpio.c @@ -174,10 +174,11 @@ EXPORT_SYMBOL(rb532_gpio_set_istat); /* * Configure GPIO alternate function */ -static void rb532_gpio_set_func(int bit, unsigned gpio) +void rb532_gpio_set_func(unsigned gpio) { - rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOFUNC); + rb532_set_bit(1, gpio, rb532_gpio_chip->regbase + GPIOFUNC); } +EXPORT_SYMBOL(rb532_gpio_set_func); int __init rb532_gpio_init(void) { -- cgit v1.2.1 From 2d2eca4d11933bd37a4944aae06e6122efffaea8 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Tue, 6 Jan 2009 10:34:52 +0100 Subject: MIPS: Alchemy: time.c build fix In Linus' current -git the cpumask member is now a pointer. Signed-off-by: Manuel Lauss Signed-off-by: Ralf Baechle --- arch/mips/alchemy/common/time.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c index 32880146cbc1..6fd441d16af5 100644 --- a/arch/mips/alchemy/common/time.c +++ b/arch/mips/alchemy/common/time.c @@ -89,7 +89,7 @@ static struct clock_event_device au1x_rtcmatch2_clockdev = { .irq = AU1000_RTC_MATCH2_INT, .set_next_event = au1x_rtcmatch2_set_next_event, .set_mode = au1x_rtcmatch2_set_mode, - .cpumask = CPU_MASK_ALL, + .cpumask = CPU_MASK_ALL_PTR, }; static struct irqaction au1x_rtcmatch2_irqaction = { -- cgit v1.2.1 From 7f22391cbe82a80a9f891d8bd10fc28ff248d1e2 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Mon, 22 Dec 2008 02:24:48 +0100 Subject: hrtimers: increase clock min delta threshold while interrupt hanging Impact: avoid timer IRQ hanging slow systems While using the function graph tracer on a virtualized system, the hrtimer_interrupt can hang the system on an infinite loop. This can be caused in several situations: - the hardware is very slow and HZ is set too high - something intrusive is slowing the system down (tracing under emulation) ... and the next clock events to program are always before the current time. This patch implements a reasonable compromise: if such a situation is detected, we share the CPUs time in 1/4 to process the hrtimer interrupts. This is enough to let the system running without serious starvation. It has been successfully tested under VirtualBox with 1000 HZ and 100 HZ with function graph tracer launched. On both cases, the clock events were increased until about 25 ms periodic ticks, which means 40 HZ. So we change a hard to debug hang into a warning message and a system that still manages to limp along. Signed-off-by: Frederic Weisbecker Signed-off-by: Ingo Molnar --- kernel/hrtimer.c | 30 +++++++++++++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-) diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index f33afb0407bc..8fea312ca36c 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -1158,6 +1158,29 @@ static void __run_hrtimer(struct hrtimer *timer) #ifdef CONFIG_HIGH_RES_TIMERS +static int force_clock_reprogram; + +/* + * After 5 iteration's attempts, we consider that hrtimer_interrupt() + * is hanging, which could happen with something that slows the interrupt + * such as the tracing. Then we force the clock reprogramming for each future + * hrtimer interrupts to avoid infinite loops and use the min_delta_ns + * threshold that we will overwrite. + * The next tick event will be scheduled to 3 times we currently spend on + * hrtimer_interrupt(). This gives a good compromise, the cpus will spend + * 1/4 of their time to process the hrtimer interrupts. This is enough to + * let it running without serious starvation. + */ + +static inline void +hrtimer_interrupt_hanging(struct clock_event_device *dev, + ktime_t try_time) +{ + force_clock_reprogram = 1; + dev->min_delta_ns = (unsigned long)try_time.tv64 * 3; + printk(KERN_WARNING "hrtimer: interrupt too slow, " + "forcing clock min delta to %lu ns\n", dev->min_delta_ns); +} /* * High resolution timer interrupt * Called with interrupts disabled @@ -1167,6 +1190,7 @@ void hrtimer_interrupt(struct clock_event_device *dev) struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases); struct hrtimer_clock_base *base; ktime_t expires_next, now; + int nr_retries = 0; int i; BUG_ON(!cpu_base->hres_active); @@ -1174,6 +1198,10 @@ void hrtimer_interrupt(struct clock_event_device *dev) dev->next_event.tv64 = KTIME_MAX; retry: + /* 5 retries is enough to notice a hang */ + if (!(++nr_retries % 5)) + hrtimer_interrupt_hanging(dev, ktime_sub(ktime_get(), now)); + now = ktime_get(); expires_next.tv64 = KTIME_MAX; @@ -1226,7 +1254,7 @@ void hrtimer_interrupt(struct clock_event_device *dev) /* Reprogramming necessary ? */ if (expires_next.tv64 != KTIME_MAX) { - if (tick_program_event(expires_next, 0)) + if (tick_program_event(expires_next, force_clock_reprogram)) goto retry; } } -- cgit v1.2.1 From 94df7de0289bc2df3d6e85cd2ece52bf42682f45 Mon Sep 17 00:00:00 2001 From: Sebastien Dugue Date: Mon, 1 Dec 2008 14:09:07 +0100 Subject: hrtimers: allow the hot-unplugging of all cpus Impact: fix CPU hotplug hang on Power6 testbox On architectures that support offlining all cpus (at least powerpc/pseries), hot-unpluging the tick_do_timer_cpu can result in a system hang. This comes from the fact that if the cpu going down happens to be the cpu doing the tick, then as the tick_do_timer_cpu handover happens after the cpu is dead (via the CPU_DEAD notification), we're left without ticks, jiffies are frozen and any task relying on timers (msleep, ...) is stuck. That's particularly the case for the cpu looping in __cpu_die() waiting for the dying cpu to be dead. This patch addresses this by having the tick_do_timer_cpu handover happen earlier during the CPU_DYING notification. For this, a new clockevent notification type is introduced (CLOCK_EVT_NOTIFY_CPU_DYING) which is triggered in hrtimer_cpu_notify(). Signed-off-by: Sebastien Dugue Cc: Signed-off-by: Ingo Molnar --- include/linux/clockchips.h | 1 + kernel/hrtimer.c | 4 ++++ kernel/time/tick-common.c | 26 +++++++++++++++++++------- 3 files changed, 24 insertions(+), 7 deletions(-) diff --git a/include/linux/clockchips.h b/include/linux/clockchips.h index cea153697ec7..3a1dbba4d3ae 100644 --- a/include/linux/clockchips.h +++ b/include/linux/clockchips.h @@ -36,6 +36,7 @@ enum clock_event_nofitiers { CLOCK_EVT_NOTIFY_BROADCAST_EXIT, CLOCK_EVT_NOTIFY_SUSPEND, CLOCK_EVT_NOTIFY_RESUME, + CLOCK_EVT_NOTIFY_CPU_DYING, CLOCK_EVT_NOTIFY_CPU_DEAD, }; diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index 8fea312ca36c..647a40e2fea1 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -1608,6 +1608,10 @@ static int __cpuinit hrtimer_cpu_notify(struct notifier_block *self, break; #ifdef CONFIG_HOTPLUG_CPU + case CPU_DYING: + case CPU_DYING_FROZEN: + clockevents_notify(CLOCK_EVT_NOTIFY_CPU_DYING, &scpu); + break; case CPU_DEAD: case CPU_DEAD_FROZEN: { diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c index 63e05d423a09..21a5ca849514 100644 --- a/kernel/time/tick-common.c +++ b/kernel/time/tick-common.c @@ -273,6 +273,21 @@ out_bc: return ret; } +/* + * Transfer the do_timer job away from a dying cpu. + * + * Called with interrupts disabled. + */ +static void tick_handover_do_timer(int *cpup) +{ + if (*cpup == tick_do_timer_cpu) { + int cpu = cpumask_first(cpu_online_mask); + + tick_do_timer_cpu = (cpu < nr_cpu_ids) ? cpu : + TICK_DO_TIMER_NONE; + } +} + /* * Shutdown an event device on a given cpu: * @@ -297,13 +312,6 @@ static void tick_shutdown(unsigned int *cpup) clockevents_exchange_device(dev, NULL); td->evtdev = NULL; } - /* Transfer the do_timer job away from this cpu */ - if (*cpup == tick_do_timer_cpu) { - int cpu = cpumask_first(cpu_online_mask); - - tick_do_timer_cpu = (cpu < nr_cpu_ids) ? cpu : - TICK_DO_TIMER_NONE; - } spin_unlock_irqrestore(&tick_device_lock, flags); } @@ -357,6 +365,10 @@ static int tick_notify(struct notifier_block *nb, unsigned long reason, tick_broadcast_oneshot_control(reason); break; + case CLOCK_EVT_NOTIFY_CPU_DYING: + tick_handover_do_timer(dev); + break; + case CLOCK_EVT_NOTIFY_CPU_DEAD: tick_shutdown_broadcast_oneshot(dev); tick_shutdown_broadcast(dev); -- cgit v1.2.1 From b0a9b5111abf60ef07eade834f480e89004c7920 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 25 Jan 2009 11:31:36 +0100 Subject: hrtimer: prevent negative expiry value after clock_was_set() Impact: prevent false positive WARN_ON() in clockevents_program_event() clock_was_set() changes the base->offset of CLOCK_REALTIME and enforces the reprogramming of the clockevent device to expire timers which are based on CLOCK_REALTIME. If the clock change is large enough then the subtraction of the timer expiry value and base->offset can become negative which triggers the warning in clockevents_program_event(). Check the subtraction result and set a negative value to 0. Signed-off-by: Thomas Gleixner --- kernel/hrtimer.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index 647a40e2fea1..f394d2a42ca3 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -501,6 +501,13 @@ static void hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base) continue; timer = rb_entry(base->first, struct hrtimer, node); expires = ktime_sub(hrtimer_get_expires(timer), base->offset); + /* + * clock_was_set() has changed base->offset so the + * result might be negative. Fix it up to prevent a + * false positive in clockevents_program_event() + */ + if (expires.tv64 < 0) + expires.tv64 = 0; if (expires.tv64 < cpu_base->expires_next.tv64) cpu_base->expires_next = expires; } -- cgit v1.2.1 From 9bf503e6bec3f2d28298808454eebde031ab5b5b Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Sun, 18 Jan 2009 14:32:27 +0100 Subject: regulator: move bq24022 init back to module_init instead of subsys_initcall This workaround was needed when regulator/ was not linked before both power/ and usb/otg/ in drivers/Makefile. Now that it is even linked before mfd/, this patch makes sure that bq24022 isn't probed before the GPIO expander is set up. Signed-off-by: Philipp Zabel Signed-off-by: Liam Girdwood --- drivers/regulator/bq24022.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/regulator/bq24022.c b/drivers/regulator/bq24022.c index 366565aba865..c175e38a4cd5 100644 --- a/drivers/regulator/bq24022.c +++ b/drivers/regulator/bq24022.c @@ -152,11 +152,7 @@ static void __exit bq24022_exit(void) platform_driver_unregister(&bq24022_driver); } -/* - * make sure this is probed before gpio_vbus and pda_power, - * but after asic3 or other GPIO expander drivers. - */ -subsys_initcall(bq24022_init); +module_init(bq24022_init); module_exit(bq24022_exit); MODULE_AUTHOR("Philipp Zabel"); -- cgit v1.2.1 From 8dd2c9e3128a5784a01084b52d5bb7efd4371ac6 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sat, 17 Jan 2009 16:06:40 +0100 Subject: leds: Fix bounds checking of wm8350->pmic.led Fix bounds checking of wm8350->pmic.led Signed-off-by: Roel Kluin Signed-off-by: Liam Girdwood --- drivers/regulator/wm8350-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c index 7aa35248181b..5056e23e4414 100644 --- a/drivers/regulator/wm8350-regulator.c +++ b/drivers/regulator/wm8350-regulator.c @@ -1435,7 +1435,7 @@ int wm8350_register_led(struct wm8350 *wm8350, int lednum, int dcdc, int isink, struct platform_device *pdev; int ret; - if (lednum > ARRAY_SIZE(wm8350->pmic.led) || lednum < 0) { + if (lednum >= ARRAY_SIZE(wm8350->pmic.led) || lednum < 0) { dev_err(wm8350->dev, "Invalid LED index %d\n", lednum); return -ENODEV; } -- cgit v1.2.1 From a11da890e4c9850411303efcf6514f048ca880ee Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Fri, 30 Jan 2009 13:45:31 -0800 Subject: sky2: fix hard hang with netconsoling and iface going up Printing anything over netconsole before hw is up and running is, of course, not going to work. Signed-off-by: Alexey Dobriyan Acked-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/sky2.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 3668e81e474d..994703cc0db3 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1403,9 +1403,6 @@ static int sky2_up(struct net_device *dev) } - if (netif_msg_ifup(sky2)) - printk(KERN_INFO PFX "%s: enabling interface\n", dev->name); - netif_carrier_off(dev); /* must be power of 2 */ @@ -1484,6 +1481,9 @@ static int sky2_up(struct net_device *dev) sky2_write32(hw, B0_IMSK, imask); sky2_set_multicast(dev); + + if (netif_msg_ifup(sky2)) + printk(KERN_INFO PFX "%s: enabling interface\n", dev->name); return 0; err_out: -- cgit v1.2.1 From 869b5b3888fbd2024af632e3648c00860ba3cca6 Mon Sep 17 00:00:00 2001 From: Steve Hodgson Date: Thu, 29 Jan 2009 17:48:10 +0000 Subject: sfc: SFT9001: Enable robust link training Enable a firmware option that appears to be necessary for reliable operation. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/tenxpress.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c index 9ecb77da9545..19cfc318954c 100644 --- a/drivers/net/sfc/tenxpress.c +++ b/drivers/net/sfc/tenxpress.c @@ -67,6 +67,8 @@ #define PMA_PMD_EXT_CLK312_WIDTH 1 #define PMA_PMD_EXT_LPOWER_LBN 12 #define PMA_PMD_EXT_LPOWER_WIDTH 1 +#define PMA_PMD_EXT_ROBUST_LBN 14 +#define PMA_PMD_EXT_ROBUST_WIDTH 1 #define PMA_PMD_EXT_SSR_LBN 15 #define PMA_PMD_EXT_SSR_WIDTH 1 @@ -284,7 +286,9 @@ static int tenxpress_init(struct efx_nic *efx) PMA_PMD_XCONTROL_REG); reg |= ((1 << PMA_PMD_EXT_GMII_EN_LBN) | (1 << PMA_PMD_EXT_CLK_OUT_LBN) | - (1 << PMA_PMD_EXT_CLK312_LBN)); + (1 << PMA_PMD_EXT_CLK312_LBN) | + (1 << PMA_PMD_EXT_ROBUST_LBN)); + mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg); mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT, -- cgit v1.2.1 From 2d18835d65b7433e7e6583f65395f8c01e7874af Mon Sep 17 00:00:00 2001 From: Steve Hodgson Date: Thu, 29 Jan 2009 17:48:43 +0000 Subject: sfc: SFX7101: Remove workaround for bad link training Early versions of the SFX7101 firmware could complete link training in a state where it would not adequately cancel noise (Solarflare bug 10750). We previously worked around this by resetting the PHY after seeing many Ethernet CRC errors. This workaround is unsafe since it takes no account of the interval between errors; it also appears to be unnecessary with production firmware. Therefore remove it. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/falcon.c | 4 ---- drivers/net/sfc/phy.h | 1 - drivers/net/sfc/tenxpress.c | 20 -------------------- drivers/net/sfc/workarounds.h | 3 --- 4 files changed, 28 deletions(-) diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index 5b9f2d9cc4ed..ae7b0b48bfd1 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -824,10 +824,6 @@ static void falcon_handle_rx_not_ok(struct efx_rx_queue *rx_queue, rx_ev_pause_frm ? " [PAUSE]" : ""); } #endif - - if (unlikely(rx_ev_eth_crc_err && EFX_WORKAROUND_10750(efx) && - efx->phy_type == PHY_TYPE_SFX7101)) - tenxpress_crc_err(efx); } /* Handle receive events that are not in-order. */ diff --git a/drivers/net/sfc/phy.h b/drivers/net/sfc/phy.h index 58c493ef81bb..07e855c148bc 100644 --- a/drivers/net/sfc/phy.h +++ b/drivers/net/sfc/phy.h @@ -17,7 +17,6 @@ extern struct efx_phy_operations falcon_sfx7101_phy_ops; extern struct efx_phy_operations falcon_sft9001_phy_ops; extern void tenxpress_phy_blink(struct efx_nic *efx, bool blink); -extern void tenxpress_crc_err(struct efx_nic *efx); /**************************************************************************** * Exported functions from the driver for XFP optical PHYs diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c index 19cfc318954c..80c8d6e3131e 100644 --- a/drivers/net/sfc/tenxpress.c +++ b/drivers/net/sfc/tenxpress.c @@ -189,25 +189,12 @@ * rails */ #define LNPGA_PDOWN_WAIT (HZ / 5) -static int crc_error_reset_threshold = 100; -module_param(crc_error_reset_threshold, int, 0644); -MODULE_PARM_DESC(crc_error_reset_threshold, - "Max number of CRC errors before XAUI reset"); - struct tenxpress_phy_data { enum efx_loopback_mode loopback_mode; - atomic_t bad_crc_count; enum efx_phy_mode phy_mode; int bad_lp_tries; }; -void tenxpress_crc_err(struct efx_nic *efx) -{ - struct tenxpress_phy_data *phy_data = efx->phy_data; - if (phy_data != NULL) - atomic_inc(&phy_data->bad_crc_count); -} - static ssize_t show_phy_short_reach(struct device *dev, struct device_attribute *attr, char *buf) { @@ -627,13 +614,6 @@ static void tenxpress_phy_poll(struct efx_nic *efx) if (phy_data->phy_mode != PHY_MODE_NORMAL) return; - - if (EFX_WORKAROUND_10750(efx) && - atomic_read(&phy_data->bad_crc_count) > crc_error_reset_threshold) { - EFX_ERR(efx, "Resetting XAUI due to too many CRC errors\n"); - falcon_reset_xaui(efx); - atomic_set(&phy_data->bad_crc_count, 0); - } } static void tenxpress_phy_fini(struct efx_nic *efx) diff --git a/drivers/net/sfc/workarounds.h b/drivers/net/sfc/workarounds.h index 82e03e1d7371..797a0cf7cd6b 100644 --- a/drivers/net/sfc/workarounds.h +++ b/drivers/net/sfc/workarounds.h @@ -18,7 +18,6 @@ #define EFX_WORKAROUND_ALWAYS(efx) 1 #define EFX_WORKAROUND_FALCON_A(efx) (falcon_rev(efx) <= FALCON_REV_A1) #define EFX_WORKAROUND_10G(efx) EFX_IS10G(efx) -#define EFX_WORKAROUND_SFX7101(efx) ((efx)->phy_type == PHY_TYPE_SFX7101) #define EFX_WORKAROUND_SFT9001A(efx) ((efx)->phy_type == PHY_TYPE_SFT9001A) /* XAUI resets if link not detected */ @@ -29,8 +28,6 @@ #define EFX_WORKAROUND_7884 EFX_WORKAROUND_10G /* TX pkt parser problem with <= 16 byte TXes */ #define EFX_WORKAROUND_9141 EFX_WORKAROUND_ALWAYS -/* Low rate CRC errors require XAUI reset */ -#define EFX_WORKAROUND_10750 EFX_WORKAROUND_SFX7101 /* TX_EV_PKT_ERR can be caused by a dangling TX descriptor * or a PCIe error (bug 11028) */ #define EFX_WORKAROUND_10727 EFX_WORKAROUND_ALWAYS -- cgit v1.2.1 From 8b9dc8dd447cfe27c0214761ced22a8e4aa58f5e Mon Sep 17 00:00:00 2001 From: Steve Hodgson Date: Thu, 29 Jan 2009 17:49:09 +0000 Subject: sfc: SFT9001: Fix speed reporting in 1G PHY loopback Instead of disabling AN in loopback, just prevent restarting AN and override the speed in sft9001_get_settings(). Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/mdio_10g.c | 4 ++++ drivers/net/sfc/tenxpress.c | 27 +++++++++------------------ drivers/net/sfc/workarounds.h | 5 +++++ 3 files changed, 18 insertions(+), 18 deletions(-) diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c index f6a16428113d..7f09ab581945 100644 --- a/drivers/net/sfc/mdio_10g.c +++ b/drivers/net/sfc/mdio_10g.c @@ -15,6 +15,7 @@ #include "net_driver.h" #include "mdio_10g.h" #include "boards.h" +#include "workarounds.h" int mdio_clause45_reset_mmd(struct efx_nic *port, int mmd, int spins, int spintime) @@ -517,6 +518,9 @@ int mdio_clause45_set_settings(struct efx_nic *efx, reg |= BMCR_ANENABLE | BMCR_ANRESTART; else reg &= ~BMCR_ANENABLE; + if (EFX_WORKAROUND_15195(efx) + && LOOPBACK_MASK(efx) & efx->phy_op->loopbacks) + reg &= ~BMCR_ANRESTART; if (xnp) reg |= 1 << MDIO_AN_CTRL_XNP_LBN; else diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c index 80c8d6e3131e..bc2833f9cbe4 100644 --- a/drivers/net/sfc/tenxpress.c +++ b/drivers/net/sfc/tenxpress.c @@ -511,7 +511,7 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx) { struct tenxpress_phy_data *phy_data = efx->phy_data; struct ethtool_cmd ecmd; - bool phy_mode_change, loop_reset, loop_toggle, loopback; + bool phy_mode_change, loop_reset; if (efx->phy_mode & (PHY_MODE_OFF | PHY_MODE_SPECIAL)) { phy_data->phy_mode = efx->phy_mode; @@ -522,12 +522,10 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx) phy_mode_change = (efx->phy_mode == PHY_MODE_NORMAL && phy_data->phy_mode != PHY_MODE_NORMAL); - loopback = LOOPBACK_MASK(efx) & efx->phy_op->loopbacks; - loop_toggle = LOOPBACK_CHANGED(phy_data, efx, efx->phy_op->loopbacks); loop_reset = (LOOPBACK_OUT_OF(phy_data, efx, efx->phy_op->loopbacks) || LOOPBACK_CHANGED(phy_data, efx, 1 << LOOPBACK_GPHY)); - if (loop_reset || loop_toggle || loopback || phy_mode_change) { + if (loop_reset || phy_mode_change) { int rc; efx->phy_op->get_settings(efx, &ecmd); @@ -542,20 +540,6 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx) falcon_reset_xaui(efx); } - if (efx->phy_type != PHY_TYPE_SFX7101) { - /* Only change autoneg once, on coming out or - * going into loopback */ - if (loop_toggle) - ecmd.autoneg = !loopback; - if (loopback) { - ecmd.duplex = DUPLEX_FULL; - if (efx->loopback_mode == LOOPBACK_GPHY) - ecmd.speed = SPEED_1000; - else - ecmd.speed = SPEED_10000; - } - } - rc = efx->phy_op->set_settings(efx, &ecmd); WARN_ON(rc); } @@ -813,6 +797,13 @@ static void sft9001_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) ecmd->duplex = (reg & (1 << GPHY_DUPLEX_LBN) ? DUPLEX_FULL : DUPLEX_HALF); } + + /* In loopback, the PHY automatically brings up the correct interface, + * but doesn't advertise the correct speed. So override it */ + if (efx->loopback_mode == LOOPBACK_GPHY) + ecmd->speed = SPEED_1000; + else if (LOOPBACK_MASK(efx) & SFT9001_LOOPBACKS) + ecmd->speed = SPEED_10000; } static int sft9001_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) diff --git a/drivers/net/sfc/workarounds.h b/drivers/net/sfc/workarounds.h index 797a0cf7cd6b..420fe153ea2f 100644 --- a/drivers/net/sfc/workarounds.h +++ b/drivers/net/sfc/workarounds.h @@ -19,6 +19,8 @@ #define EFX_WORKAROUND_FALCON_A(efx) (falcon_rev(efx) <= FALCON_REV_A1) #define EFX_WORKAROUND_10G(efx) EFX_IS10G(efx) #define EFX_WORKAROUND_SFT9001A(efx) ((efx)->phy_type == PHY_TYPE_SFT9001A) +#define EFX_WORKAROUND_SFT9001(efx) ((efx)->phy_type == PHY_TYPE_SFT9001A || \ + (efx)->phy_type == PHY_TYPE_SFT9001B) /* XAUI resets if link not detected */ #define EFX_WORKAROUND_5147 EFX_WORKAROUND_ALWAYS @@ -56,4 +58,7 @@ /* Need to keep AN enabled */ #define EFX_WORKAROUND_13963 EFX_WORKAROUND_SFT9001A +/* Don't restart AN in near-side loopback */ +#define EFX_WORKAROUND_15195 EFX_WORKAROUND_SFT9001 + #endif /* EFX_WORKAROUNDS_H */ -- cgit v1.2.1 From 2f08575389ac37ece5922094777442d8fdd8c00a Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Thu, 29 Jan 2009 17:49:29 +0000 Subject: sfc: SFN4111T: Fix GPIO sharing between I2C and FLASH_CFG_1 Change sfn4111t_reset() to change only GPIO output enables so that it doesn't break subsequent I2C operations. Update comments to explain exactly what we're doing. Add a short sleep to make sure the FLASH_CFG_1 value is latched before any subsequent I2C operations. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/sfe4001.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c index 16b80acb9992..c7c95db2af6d 100644 --- a/drivers/net/sfc/sfe4001.c +++ b/drivers/net/sfc/sfe4001.c @@ -186,19 +186,22 @@ static int sfn4111t_reset(struct efx_nic *efx) { efx_oword_t reg; - /* GPIO pins are also used for I2C, so block that temporarily */ + /* GPIO 3 and the GPIO register are shared with I2C, so block that */ mutex_lock(&efx->i2c_adap.bus_lock); + /* Pull RST_N (GPIO 2) low then let it up again, setting the + * FLASH_CFG_1 strap (GPIO 3) appropriately. Only change the + * output enables; the output levels should always be 0 (low) + * and we rely on external pull-ups. */ falcon_read(efx, ®, GPIO_CTL_REG_KER); EFX_SET_OWORD_FIELD(reg, GPIO2_OEN, true); - EFX_SET_OWORD_FIELD(reg, GPIO2_OUT, false); falcon_write(efx, ®, GPIO_CTL_REG_KER); msleep(1000); - EFX_SET_OWORD_FIELD(reg, GPIO2_OUT, true); - EFX_SET_OWORD_FIELD(reg, GPIO3_OEN, true); - EFX_SET_OWORD_FIELD(reg, GPIO3_OUT, - !(efx->phy_mode & PHY_MODE_SPECIAL)); + EFX_SET_OWORD_FIELD(reg, GPIO2_OEN, false); + EFX_SET_OWORD_FIELD(reg, GPIO3_OEN, + !!(efx->phy_mode & PHY_MODE_SPECIAL)); falcon_write(efx, ®, GPIO_CTL_REG_KER); + msleep(1); mutex_unlock(&efx->i2c_adap.bus_lock); -- cgit v1.2.1 From 0cc128387969753ae037401eb49e4bbb474186ea Mon Sep 17 00:00:00 2001 From: Steve Hodgson Date: Thu, 29 Jan 2009 17:49:59 +0000 Subject: sfc: Fix post-reset MAC selection Modify falcon_switch_mac() to always set NIC_STAT_REG, even if the the MAC is the same as it was before. This ensures that the value is correct after an online reset. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/falcon.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index ae7b0b48bfd1..d9412f83a78e 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -2283,16 +2283,12 @@ int falcon_switch_mac(struct efx_nic *efx) efx->link_fd = true; } + WARN_ON(!mutex_is_locked(&efx->mac_lock)); efx->mac_op = (EFX_IS10G(efx) ? &falcon_xmac_operations : &falcon_gmac_operations); - if (old_mac_op == efx->mac_op) - return 0; - - WARN_ON(!mutex_is_locked(&efx->mac_lock)); - - /* Not all macs support a mac-level link state */ - efx->mac_up = true; + /* Always push the NIC_STAT_REG setting even if the mac hasn't + * changed, because this function is run post online reset */ falcon_read(efx, &nic_stat, NIC_STAT_REG); strap_val = EFX_IS10G(efx) ? 5 : 3; if (falcon_rev(efx) >= FALCON_REV_B0) { @@ -2305,8 +2301,13 @@ int falcon_switch_mac(struct efx_nic *efx) BUG_ON(EFX_OWORD_FIELD(nic_stat, STRAP_PINS) != strap_val); } + if (old_mac_op == efx->mac_op) + return 0; EFX_LOG(efx, "selected %cMAC\n", EFX_IS10G(efx) ? 'X' : 'G'); + /* Not all macs support a mac-level link state */ + efx->mac_up = true; + return falcon_reset_macs(efx); } -- cgit v1.2.1 From 4b988280be13a1b4c17f51cc66948aef467e7601 Mon Sep 17 00:00:00 2001 From: Steve Hodgson Date: Thu, 29 Jan 2009 17:50:51 +0000 Subject: sfc: Reinitialise the PHY completely in case of a PHY or NIC reset In particular, set pause advertising bits properly. A PHY reset is not necessary to recover from the register self-test, so use a "invisible" reset there instead. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/efx.c | 26 +++++++++++++++++++------- drivers/net/sfc/efx.h | 7 ++++--- drivers/net/sfc/selftest.c | 7 ++++--- drivers/net/sfc/tenxpress.c | 1 + 4 files changed, 28 insertions(+), 13 deletions(-) diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index 7673fd92eaf5..b0e53087bda0 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -676,9 +676,8 @@ static int efx_init_port(struct efx_nic *efx) rc = efx->phy_op->init(efx); if (rc) return rc; - efx->phy_op->reconfigure(efx); - mutex_lock(&efx->mac_lock); + efx->phy_op->reconfigure(efx); rc = falcon_switch_mac(efx); mutex_unlock(&efx->mac_lock); if (rc) @@ -1622,7 +1621,8 @@ static void efx_unregister_netdev(struct efx_nic *efx) /* Tears down the entire software state and most of the hardware state * before reset. */ -void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd) +void efx_reset_down(struct efx_nic *efx, enum reset_type method, + struct ethtool_cmd *ecmd) { EFX_ASSERT_RESET_SERIALISED(efx); @@ -1639,6 +1639,8 @@ void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd) efx->phy_op->get_settings(efx, ecmd); efx_fini_channels(efx); + if (efx->port_initialized && method != RESET_TYPE_INVISIBLE) + efx->phy_op->fini(efx); } /* This function will always ensure that the locks acquired in @@ -1646,7 +1648,8 @@ void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd) * that we were unable to reinitialise the hardware, and the * driver should be disabled. If ok is false, then the rx and tx * engines are not restarted, pending a RESET_DISABLE. */ -int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd, bool ok) +int efx_reset_up(struct efx_nic *efx, enum reset_type method, + struct ethtool_cmd *ecmd, bool ok) { int rc; @@ -1658,6 +1661,15 @@ int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd, bool ok) ok = false; } + if (efx->port_initialized && method != RESET_TYPE_INVISIBLE) { + if (ok) { + rc = efx->phy_op->init(efx); + if (rc) + ok = false; + } else + efx->port_initialized = false; + } + if (ok) { efx_init_channels(efx); @@ -1702,7 +1714,7 @@ static int efx_reset(struct efx_nic *efx) EFX_INFO(efx, "resetting (%d)\n", method); - efx_reset_down(efx, &ecmd); + efx_reset_down(efx, method, &ecmd); rc = falcon_reset_hw(efx, method); if (rc) { @@ -1721,10 +1733,10 @@ static int efx_reset(struct efx_nic *efx) /* Leave device stopped if necessary */ if (method == RESET_TYPE_DISABLE) { - efx_reset_up(efx, &ecmd, false); + efx_reset_up(efx, method, &ecmd, false); rc = -EIO; } else { - rc = efx_reset_up(efx, &ecmd, true); + rc = efx_reset_up(efx, method, &ecmd, true); } out_disable: diff --git a/drivers/net/sfc/efx.h b/drivers/net/sfc/efx.h index 0dd7a532c78a..ac201587a163 100644 --- a/drivers/net/sfc/efx.h +++ b/drivers/net/sfc/efx.h @@ -40,9 +40,10 @@ extern void efx_reconfigure_port(struct efx_nic *efx); extern void __efx_reconfigure_port(struct efx_nic *efx); /* Reset handling */ -extern void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd); -extern int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd, - bool ok); +extern void efx_reset_down(struct efx_nic *efx, enum reset_type method, + struct ethtool_cmd *ecmd); +extern int efx_reset_up(struct efx_nic *efx, enum reset_type method, + struct ethtool_cmd *ecmd, bool ok); /* Global */ extern void efx_schedule_reset(struct efx_nic *efx, enum reset_type type); diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c index dba0d64d50cd..0a598084c513 100644 --- a/drivers/net/sfc/selftest.c +++ b/drivers/net/sfc/selftest.c @@ -665,6 +665,7 @@ int efx_selftest(struct efx_nic *efx, struct efx_self_tests *tests, { enum efx_loopback_mode loopback_mode = efx->loopback_mode; int phy_mode = efx->phy_mode; + enum reset_type reset_method = RESET_TYPE_INVISIBLE; struct ethtool_cmd ecmd; struct efx_channel *channel; int rc_test = 0, rc_reset = 0, rc; @@ -718,21 +719,21 @@ int efx_selftest(struct efx_nic *efx, struct efx_self_tests *tests, mutex_unlock(&efx->mac_lock); /* free up all consumers of SRAM (including all the queues) */ - efx_reset_down(efx, &ecmd); + efx_reset_down(efx, reset_method, &ecmd); rc = efx_test_chip(efx, tests); if (rc && !rc_test) rc_test = rc; /* reset the chip to recover from the register test */ - rc_reset = falcon_reset_hw(efx, RESET_TYPE_ALL); + rc_reset = falcon_reset_hw(efx, reset_method); /* Ensure that the phy is powered and out of loopback * for the bist and loopback tests */ efx->phy_mode &= ~PHY_MODE_LOW_POWER; efx->loopback_mode = LOOPBACK_NONE; - rc = efx_reset_up(efx, &ecmd, rc_reset == 0); + rc = efx_reset_up(efx, reset_method, &ecmd, rc_reset == 0); if (rc && !rc_reset) rc_reset = rc; diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c index bc2833f9cbe4..c9584619322a 100644 --- a/drivers/net/sfc/tenxpress.c +++ b/drivers/net/sfc/tenxpress.c @@ -337,6 +337,7 @@ static int tenxpress_phy_init(struct efx_nic *efx) rc = tenxpress_init(efx); if (rc < 0) goto fail; + mdio_clause45_set_pause(efx); if (efx->phy_type == PHY_TYPE_SFT9001B) { rc = device_create_file(&efx->pci_dev->dev, -- cgit v1.2.1 From 67797763c60bfe3bbf99ef81ce1042e71678d109 Mon Sep 17 00:00:00 2001 From: Steve Hodgson Date: Thu, 29 Jan 2009 17:51:15 +0000 Subject: sfc: Test for PHYXS faults whenever we cannot test link state bits Depending on the loopback mode, there may be no pertinent link state bits. In this case we test the PHYXS RX fault bit instead. Make sure to do this in all cases where there are no link state bits. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/mdio_10g.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c index 7f09ab581945..16bc5853d0ea 100644 --- a/drivers/net/sfc/mdio_10g.c +++ b/drivers/net/sfc/mdio_10g.c @@ -180,17 +180,12 @@ bool mdio_clause45_links_ok(struct efx_nic *efx, unsigned int mmd_mask) return false; else if (efx_phy_mode_disabled(efx->phy_mode)) return false; - else if (efx->loopback_mode == LOOPBACK_PHYXS) { + else if (efx->loopback_mode == LOOPBACK_PHYXS) mmd_mask &= ~(MDIO_MMDREG_DEVS_PHYXS | MDIO_MMDREG_DEVS_PCS | MDIO_MMDREG_DEVS_PMAPMD | MDIO_MMDREG_DEVS_AN); - if (!mmd_mask) { - reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PHYXS, - MDIO_PHYXS_STATUS2); - return !(reg & (1 << MDIO_PHYXS_STATUS2_RX_FAULT_LBN)); - } - } else if (efx->loopback_mode == LOOPBACK_PCS) + else if (efx->loopback_mode == LOOPBACK_PCS) mmd_mask &= ~(MDIO_MMDREG_DEVS_PCS | MDIO_MMDREG_DEVS_PMAPMD | MDIO_MMDREG_DEVS_AN); @@ -198,6 +193,13 @@ bool mdio_clause45_links_ok(struct efx_nic *efx, unsigned int mmd_mask) mmd_mask &= ~(MDIO_MMDREG_DEVS_PMAPMD | MDIO_MMDREG_DEVS_AN); + if (!mmd_mask) { + /* Use presence of XGMII faults in leui of link state */ + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PHYXS, + MDIO_PHYXS_STATUS2); + return !(reg & (1 << MDIO_PHYXS_STATUS2_RX_FAULT_LBN)); + } + while (mmd_mask) { if (mmd_mask & 1) { /* Double reads because link state is latched, and a -- cgit v1.2.1 From 44176b45d1aae04d99c505e6ee98d2d3c3fce173 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Thu, 29 Jan 2009 17:51:48 +0000 Subject: sfc: Update board info for hardware monitor on SFN4111T-R5 and later Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/sfe4001.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c index c7c95db2af6d..853057e87fb2 100644 --- a/drivers/net/sfc/sfe4001.c +++ b/drivers/net/sfc/sfe4001.c @@ -375,17 +375,25 @@ static void sfn4111t_fini(struct efx_nic *efx) i2c_unregister_device(efx->board_info.hwmon_client); } -static struct i2c_board_info sfn4111t_hwmon_info = { +static struct i2c_board_info sfn4111t_a0_hwmon_info = { I2C_BOARD_INFO("max6647", 0x4e), .irq = -1, }; +static struct i2c_board_info sfn4111t_r5_hwmon_info = { + I2C_BOARD_INFO("max6646", 0x4d), + .irq = -1, +}; + int sfn4111t_init(struct efx_nic *efx) { int rc; efx->board_info.hwmon_client = - i2c_new_device(&efx->i2c_adap, &sfn4111t_hwmon_info); + i2c_new_device(&efx->i2c_adap, + (efx->board_info.minor < 5) ? + &sfn4111t_a0_hwmon_info : + &sfn4111t_r5_hwmon_info); if (!efx->board_info.hwmon_client) return -EIO; -- cgit v1.2.1 From c9d5a53f060bb9ac6cd20d9768b4b75e22bc8689 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Thu, 29 Jan 2009 17:52:11 +0000 Subject: sfc: SFT9001: Always enable XNP exchange on SFT9001 rev B This workaround is not specific to rev A. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/workarounds.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/sfc/workarounds.h b/drivers/net/sfc/workarounds.h index 420fe153ea2f..b810dcdf4681 100644 --- a/drivers/net/sfc/workarounds.h +++ b/drivers/net/sfc/workarounds.h @@ -54,7 +54,7 @@ #define EFX_WORKAROUND_8071 EFX_WORKAROUND_FALCON_A /* Need to send XNP pages for 100BaseT */ -#define EFX_WORKAROUND_13204 EFX_WORKAROUND_SFT9001A +#define EFX_WORKAROUND_13204 EFX_WORKAROUND_SFT9001 /* Need to keep AN enabled */ #define EFX_WORKAROUND_13963 EFX_WORKAROUND_SFT9001A -- cgit v1.2.1 From af4ad9bca0c4039355b20d760b4fd39afa48c59d Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Thu, 29 Jan 2009 17:59:37 +0000 Subject: sfc: SFX7101/SFT9001: Fix AN advertisements All 10Xpress PHYs require autonegotiation all the time; enforce this in the set_settings() method and do not treat it as a workaround. Remove claimed support for 100M HD mode since it is not supported by current firmware. Do not set speed override bits when AN is enabled, and do not use register 1.49192 for AN configuration as it can override what we set elsewhere. Always set the AN selector bits to 1 (802.3). Fix confusion between Next Page and Extended Next Page. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/ethtool.c | 3 - drivers/net/sfc/mdio_10g.c | 177 +++++++++++++++++++----------------------- drivers/net/sfc/mdio_10g.h | 3 +- drivers/net/sfc/net_driver.h | 4 +- drivers/net/sfc/tenxpress.c | 151 ++++++++++++++--------------------- drivers/net/sfc/workarounds.h | 4 - 6 files changed, 141 insertions(+), 201 deletions(-) diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c index 53d259e90187..7b5924c039b3 100644 --- a/drivers/net/sfc/ethtool.c +++ b/drivers/net/sfc/ethtool.c @@ -219,9 +219,6 @@ int efx_ethtool_set_settings(struct net_device *net_dev, struct efx_nic *efx = netdev_priv(net_dev); int rc; - if (EFX_WORKAROUND_13963(efx) && !ecmd->autoneg) - return -EINVAL; - /* Falcon GMAC does not support 1000Mbps HD */ if (ecmd->speed == SPEED_1000 && ecmd->duplex != DUPLEX_FULL) { EFX_LOG(efx, "rejecting unsupported 1000Mbps HD" diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c index 16bc5853d0ea..f9e2f95c3b48 100644 --- a/drivers/net/sfc/mdio_10g.c +++ b/drivers/net/sfc/mdio_10g.c @@ -266,7 +266,7 @@ void mdio_clause45_set_mmds_lpower(struct efx_nic *efx, } } -static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr, u32 xnp) +static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr) { int phy_id = efx->mii.phy_id; u32 result = 0; @@ -281,9 +281,6 @@ static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr, u32 xnp) result |= ADVERTISED_100baseT_Half; if (reg & ADVERTISE_100FULL) result |= ADVERTISED_100baseT_Full; - if (reg & LPA_RESV) - result |= xnp; - return result; } @@ -313,7 +310,7 @@ void mdio_clause45_get_settings(struct efx_nic *efx, */ void mdio_clause45_get_settings_ext(struct efx_nic *efx, struct ethtool_cmd *ecmd, - u32 xnp, u32 xnp_lpa) + u32 npage_adv, u32 npage_lpa) { int phy_id = efx->mii.phy_id; int reg; @@ -364,8 +361,8 @@ void mdio_clause45_get_settings_ext(struct efx_nic *efx, ecmd->autoneg = AUTONEG_ENABLE; ecmd->advertising |= ADVERTISED_Autoneg | - mdio_clause45_get_an(efx, - MDIO_AN_ADVERTISE, xnp); + mdio_clause45_get_an(efx, MDIO_AN_ADVERTISE) | + npage_adv; } else ecmd->autoneg = AUTONEG_DISABLE; } else @@ -374,27 +371,30 @@ void mdio_clause45_get_settings_ext(struct efx_nic *efx, if (ecmd->autoneg) { /* If AN is complete, report best common mode, * otherwise report best advertised mode. */ - u32 common = ecmd->advertising; + u32 modes = 0; if (mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, MDIO_MMDREG_STAT1) & - (1 << MDIO_AN_STATUS_AN_DONE_LBN)) { - common &= mdio_clause45_get_an(efx, MDIO_AN_LPA, - xnp_lpa); - } - if (common & ADVERTISED_10000baseT_Full) { + (1 << MDIO_AN_STATUS_AN_DONE_LBN)) + modes = (ecmd->advertising & + (mdio_clause45_get_an(efx, MDIO_AN_LPA) | + npage_lpa)); + if (modes == 0) + modes = ecmd->advertising; + + if (modes & ADVERTISED_10000baseT_Full) { ecmd->speed = SPEED_10000; ecmd->duplex = DUPLEX_FULL; - } else if (common & (ADVERTISED_1000baseT_Full | - ADVERTISED_1000baseT_Half)) { + } else if (modes & (ADVERTISED_1000baseT_Full | + ADVERTISED_1000baseT_Half)) { ecmd->speed = SPEED_1000; - ecmd->duplex = !!(common & ADVERTISED_1000baseT_Full); - } else if (common & (ADVERTISED_100baseT_Full | - ADVERTISED_100baseT_Half)) { + ecmd->duplex = !!(modes & ADVERTISED_1000baseT_Full); + } else if (modes & (ADVERTISED_100baseT_Full | + ADVERTISED_100baseT_Half)) { ecmd->speed = SPEED_100; - ecmd->duplex = !!(common & ADVERTISED_100baseT_Full); + ecmd->duplex = !!(modes & ADVERTISED_100baseT_Full); } else { ecmd->speed = SPEED_10; - ecmd->duplex = !!(common & ADVERTISED_10baseT_Full); + ecmd->duplex = !!(modes & ADVERTISED_10baseT_Full); } } else { /* Report forced settings */ @@ -418,7 +418,7 @@ int mdio_clause45_set_settings(struct efx_nic *efx, int phy_id = efx->mii.phy_id; struct ethtool_cmd prev; u32 required; - int ctrl1_bits, reg; + int reg; efx->phy_op->get_settings(efx, &prev); @@ -433,102 +433,83 @@ int mdio_clause45_set_settings(struct efx_nic *efx, if (prev.port != PORT_TP || ecmd->port != PORT_TP) return -EINVAL; - /* Check that PHY supports these settings and work out the - * basic control bits */ - if (ecmd->duplex) { + /* Check that PHY supports these settings */ + if (ecmd->autoneg) { + required = SUPPORTED_Autoneg; + } else if (ecmd->duplex) { switch (ecmd->speed) { - case SPEED_10: - ctrl1_bits = BMCR_FULLDPLX; - required = SUPPORTED_10baseT_Full; - break; - case SPEED_100: - ctrl1_bits = BMCR_SPEED100 | BMCR_FULLDPLX; - required = SUPPORTED_100baseT_Full; - break; - case SPEED_1000: - ctrl1_bits = BMCR_SPEED1000 | BMCR_FULLDPLX; - required = SUPPORTED_1000baseT_Full; - break; - case SPEED_10000: - ctrl1_bits = (BMCR_SPEED1000 | BMCR_SPEED100 | - BMCR_FULLDPLX); - required = SUPPORTED_10000baseT_Full; - break; - default: - return -EINVAL; + case SPEED_10: required = SUPPORTED_10baseT_Full; break; + case SPEED_100: required = SUPPORTED_100baseT_Full; break; + default: return -EINVAL; } } else { switch (ecmd->speed) { - case SPEED_10: - ctrl1_bits = 0; - required = SUPPORTED_10baseT_Half; - break; - case SPEED_100: - ctrl1_bits = BMCR_SPEED100; - required = SUPPORTED_100baseT_Half; - break; - case SPEED_1000: - ctrl1_bits = BMCR_SPEED1000; - required = SUPPORTED_1000baseT_Half; - break; - default: - return -EINVAL; + case SPEED_10: required = SUPPORTED_10baseT_Half; break; + case SPEED_100: required = SUPPORTED_100baseT_Half; break; + default: return -EINVAL; } } - if (ecmd->autoneg) - required |= SUPPORTED_Autoneg; required |= ecmd->advertising; if (required & ~prev.supported) return -EINVAL; - /* Set the basic control bits */ - reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD, - MDIO_MMDREG_CTRL1); - reg &= ~(BMCR_SPEED1000 | BMCR_SPEED100 | BMCR_FULLDPLX | 0x003c); - reg |= ctrl1_bits; - mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD, MDIO_MMDREG_CTRL1, - reg); - - /* Set the AN registers */ - if (ecmd->autoneg != prev.autoneg || - ecmd->advertising != prev.advertising) { - bool xnp = false; - - if (efx->phy_op->set_xnp_advertise) - xnp = efx->phy_op->set_xnp_advertise(efx, - ecmd->advertising); - - if (ecmd->autoneg) { - reg = 0; - if (ecmd->advertising & ADVERTISED_10baseT_Half) - reg |= ADVERTISE_10HALF; - if (ecmd->advertising & ADVERTISED_10baseT_Full) - reg |= ADVERTISE_10FULL; - if (ecmd->advertising & ADVERTISED_100baseT_Half) - reg |= ADVERTISE_100HALF; - if (ecmd->advertising & ADVERTISED_100baseT_Full) - reg |= ADVERTISE_100FULL; - if (xnp) - reg |= ADVERTISE_RESV; - mdio_clause45_write(efx, phy_id, MDIO_MMD_AN, - MDIO_AN_ADVERTISE, reg); - } + if (ecmd->autoneg) { + bool xnp = (ecmd->advertising & ADVERTISED_10000baseT_Full + || EFX_WORKAROUND_13204(efx)); + + /* Set up the base page */ + reg = ADVERTISE_CSMA; + if (ecmd->advertising & ADVERTISED_10baseT_Half) + reg |= ADVERTISE_10HALF; + if (ecmd->advertising & ADVERTISED_10baseT_Full) + reg |= ADVERTISE_10FULL; + if (ecmd->advertising & ADVERTISED_100baseT_Half) + reg |= ADVERTISE_100HALF; + if (ecmd->advertising & ADVERTISED_100baseT_Full) + reg |= ADVERTISE_100FULL; + if (xnp) + reg |= ADVERTISE_RESV; + else if (ecmd->advertising & (ADVERTISED_1000baseT_Half | + ADVERTISED_1000baseT_Full)) + reg |= ADVERTISE_NPAGE; + reg |= efx_fc_advertise(efx->wanted_fc); + mdio_clause45_write(efx, phy_id, MDIO_MMD_AN, + MDIO_AN_ADVERTISE, reg); + + /* Set up the (extended) next page if necessary */ + if (efx->phy_op->set_npage_adv) + efx->phy_op->set_npage_adv(efx, ecmd->advertising); + /* Enable and restart AN */ reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, MDIO_MMDREG_CTRL1); - if (ecmd->autoneg) - reg |= BMCR_ANENABLE | BMCR_ANRESTART; - else - reg &= ~BMCR_ANENABLE; - if (EFX_WORKAROUND_15195(efx) - && LOOPBACK_MASK(efx) & efx->phy_op->loopbacks) - reg &= ~BMCR_ANRESTART; + reg |= BMCR_ANENABLE; + if (!(EFX_WORKAROUND_15195(efx) && + LOOPBACK_MASK(efx) & efx->phy_op->loopbacks)) + reg |= BMCR_ANRESTART; if (xnp) reg |= 1 << MDIO_AN_CTRL_XNP_LBN; else reg &= ~(1 << MDIO_AN_CTRL_XNP_LBN); mdio_clause45_write(efx, phy_id, MDIO_MMD_AN, MDIO_MMDREG_CTRL1, reg); + } else { + /* Disable AN */ + mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_AN, + MDIO_MMDREG_CTRL1, + __ffs(BMCR_ANENABLE), false); + + /* Set the basic control bits */ + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD, + MDIO_MMDREG_CTRL1); + reg &= ~(BMCR_SPEED1000 | BMCR_SPEED100 | BMCR_FULLDPLX | + 0x003c); + if (ecmd->speed == SPEED_100) + reg |= BMCR_SPEED100; + if (ecmd->duplex) + reg |= BMCR_FULLDPLX; + mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD, + MDIO_MMDREG_CTRL1, reg); } return 0; diff --git a/drivers/net/sfc/mdio_10g.h b/drivers/net/sfc/mdio_10g.h index 09bf801d0569..8ba49773ce7e 100644 --- a/drivers/net/sfc/mdio_10g.h +++ b/drivers/net/sfc/mdio_10g.h @@ -155,7 +155,8 @@ #define MDIO_AN_XNP 22 #define MDIO_AN_LPA_XNP 25 -#define MDIO_AN_10GBT_ADVERTISE 32 +#define MDIO_AN_10GBT_CTRL 32 +#define MDIO_AN_10GBT_CTRL_ADV_10G_LBN 12 #define MDIO_AN_10GBT_STATUS (33) #define MDIO_AN_10GBT_STATUS_MS_FLT_LBN (15) /* MASTER/SLAVE config fault */ #define MDIO_AN_10GBT_STATUS_MS_LBN (14) /* MASTER/SLAVE config */ diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index 5f255f75754e..8eb411a1c82e 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -566,7 +566,7 @@ struct efx_mac_operations { * @poll: Poll for hardware state. Serialised by the mac_lock. * @get_settings: Get ethtool settings. Serialised by the mac_lock. * @set_settings: Set ethtool settings. Serialised by the mac_lock. - * @set_xnp_advertise: Set abilities advertised in Extended Next Page + * @set_npage_adv: Set abilities advertised in (Extended) Next Page * (only needed where AN bit is set in mmds) * @num_tests: Number of PHY-specific tests/results * @test_names: Names of the tests/results @@ -586,7 +586,7 @@ struct efx_phy_operations { struct ethtool_cmd *ecmd); int (*set_settings) (struct efx_nic *efx, struct ethtool_cmd *ecmd); - bool (*set_xnp_advertise) (struct efx_nic *efx, u32); + void (*set_npage_adv) (struct efx_nic *efx, u32); u32 num_tests; const char *const *test_names; int (*run_tests) (struct efx_nic *efx, int *results, unsigned flags); diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c index c9584619322a..412d209d8313 100644 --- a/drivers/net/sfc/tenxpress.c +++ b/drivers/net/sfc/tenxpress.c @@ -179,11 +179,13 @@ #define C22EXT_STATUS_LINK_LBN 2 #define C22EXT_STATUS_LINK_WIDTH 1 -#define C22EXT_MSTSLV_REG 49162 -#define C22EXT_MSTSLV_1000_HD_LBN 10 -#define C22EXT_MSTSLV_1000_HD_WIDTH 1 -#define C22EXT_MSTSLV_1000_FD_LBN 11 -#define C22EXT_MSTSLV_1000_FD_WIDTH 1 +#define C22EXT_MSTSLV_CTRL 49161 +#define C22EXT_MSTSLV_CTRL_ADV_1000_HD_LBN 8 +#define C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN 9 + +#define C22EXT_MSTSLV_STATUS 49162 +#define C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN 10 +#define C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN 11 /* Time to wait between powering down the LNPGA and turning off the power * rails */ @@ -741,114 +743,76 @@ reset: return rc; } -static u32 tenxpress_get_xnp_lpa(struct efx_nic *efx) +static void +tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) { - int phy = efx->mii.phy_id; - u32 lpa = 0; + int phy_id = efx->mii.phy_id; + u32 adv = 0, lpa = 0; int reg; if (efx->phy_type != PHY_TYPE_SFX7101) { - reg = mdio_clause45_read(efx, phy, MDIO_MMD_C22EXT, - C22EXT_MSTSLV_REG); - if (reg & (1 << C22EXT_MSTSLV_1000_HD_LBN)) + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT, + C22EXT_MSTSLV_CTRL); + if (reg & (1 << C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN)) + adv |= ADVERTISED_1000baseT_Full; + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT, + C22EXT_MSTSLV_STATUS); + if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN)) lpa |= ADVERTISED_1000baseT_Half; - if (reg & (1 << C22EXT_MSTSLV_1000_FD_LBN)) + if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN)) lpa |= ADVERTISED_1000baseT_Full; } - reg = mdio_clause45_read(efx, phy, MDIO_MMD_AN, MDIO_AN_10GBT_STATUS); + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, + MDIO_AN_10GBT_CTRL); + if (reg & (1 << MDIO_AN_10GBT_CTRL_ADV_10G_LBN)) + adv |= ADVERTISED_10000baseT_Full; + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, + MDIO_AN_10GBT_STATUS); if (reg & (1 << MDIO_AN_10GBT_STATUS_LP_10G_LBN)) lpa |= ADVERTISED_10000baseT_Full; - return lpa; -} - -static void sfx7101_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) -{ - mdio_clause45_get_settings_ext(efx, ecmd, ADVERTISED_10000baseT_Full, - tenxpress_get_xnp_lpa(efx)); - ecmd->supported |= SUPPORTED_10000baseT_Full; - ecmd->advertising |= ADVERTISED_10000baseT_Full; -} - -static void sft9001_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) -{ - int phy_id = efx->mii.phy_id; - u32 xnp_adv = 0; - int reg; - - reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD, - PMA_PMD_SPEED_ENABLE_REG); - if (EFX_WORKAROUND_13204(efx) && (reg & (1 << PMA_PMD_100TX_ADV_LBN))) - xnp_adv |= ADVERTISED_100baseT_Full; - if (reg & (1 << PMA_PMD_1000T_ADV_LBN)) - xnp_adv |= ADVERTISED_1000baseT_Full; - if (reg & (1 << PMA_PMD_10000T_ADV_LBN)) - xnp_adv |= ADVERTISED_10000baseT_Full; - - mdio_clause45_get_settings_ext(efx, ecmd, xnp_adv, - tenxpress_get_xnp_lpa(efx)); - ecmd->supported |= (SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_1000baseT_Full); + mdio_clause45_get_settings_ext(efx, ecmd, adv, lpa); - /* Use the vendor defined C22ext register for duplex settings */ - if (ecmd->speed != SPEED_10000 && !ecmd->autoneg) { - reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT, - GPHY_XCONTROL_REG); - ecmd->duplex = (reg & (1 << GPHY_DUPLEX_LBN) ? - DUPLEX_FULL : DUPLEX_HALF); - } + if (efx->phy_type != PHY_TYPE_SFX7101) + ecmd->supported |= (SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full); /* In loopback, the PHY automatically brings up the correct interface, * but doesn't advertise the correct speed. So override it */ if (efx->loopback_mode == LOOPBACK_GPHY) ecmd->speed = SPEED_1000; - else if (LOOPBACK_MASK(efx) & SFT9001_LOOPBACKS) + else if (LOOPBACK_MASK(efx) & efx->phy_op->loopbacks) ecmd->speed = SPEED_10000; } -static int sft9001_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) +static int tenxpress_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) { - int phy_id = efx->mii.phy_id; - int rc; - - rc = mdio_clause45_set_settings(efx, ecmd); - if (rc) - return rc; + if (!ecmd->autoneg) + return -EINVAL; - if (ecmd->speed != SPEED_10000 && !ecmd->autoneg) - mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT, - GPHY_XCONTROL_REG, GPHY_DUPLEX_LBN, - ecmd->duplex == DUPLEX_FULL); + return mdio_clause45_set_settings(efx, ecmd); +} - return rc; +static void sfx7101_set_npage_adv(struct efx_nic *efx, u32 advertising) +{ + mdio_clause45_set_flag(efx, efx->mii.phy_id, MDIO_MMD_AN, + MDIO_AN_10GBT_CTRL, + MDIO_AN_10GBT_CTRL_ADV_10G_LBN, + advertising & ADVERTISED_10000baseT_Full); } -static bool sft9001_set_xnp_advertise(struct efx_nic *efx, u32 advertising) +static void sft9001_set_npage_adv(struct efx_nic *efx, u32 advertising) { - int phy = efx->mii.phy_id; - int reg = mdio_clause45_read(efx, phy, MDIO_MMD_PMAPMD, - PMA_PMD_SPEED_ENABLE_REG); - bool enabled; - - reg &= ~((1 << 2) | (1 << 3)); - if (EFX_WORKAROUND_13204(efx) && - (advertising & ADVERTISED_100baseT_Full)) - reg |= 1 << PMA_PMD_100TX_ADV_LBN; - if (advertising & ADVERTISED_1000baseT_Full) - reg |= 1 << PMA_PMD_1000T_ADV_LBN; - if (advertising & ADVERTISED_10000baseT_Full) - reg |= 1 << PMA_PMD_10000T_ADV_LBN; - mdio_clause45_write(efx, phy, MDIO_MMD_PMAPMD, - PMA_PMD_SPEED_ENABLE_REG, reg); - - enabled = (advertising & - (ADVERTISED_1000baseT_Half | - ADVERTISED_1000baseT_Full | - ADVERTISED_10000baseT_Full)); - if (EFX_WORKAROUND_13204(efx)) - enabled |= (advertising & ADVERTISED_100baseT_Full); - return enabled; + int phy_id = efx->mii.phy_id; + + mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT, + C22EXT_MSTSLV_CTRL, + C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN, + advertising & ADVERTISED_1000baseT_Full); + mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_AN, + MDIO_AN_10GBT_CTRL, + MDIO_AN_10GBT_CTRL_ADV_10G_LBN, + advertising & ADVERTISED_10000baseT_Full); } struct efx_phy_operations falcon_sfx7101_phy_ops = { @@ -858,8 +822,9 @@ struct efx_phy_operations falcon_sfx7101_phy_ops = { .poll = tenxpress_phy_poll, .fini = tenxpress_phy_fini, .clear_interrupt = efx_port_dummy_op_void, - .get_settings = sfx7101_get_settings, - .set_settings = mdio_clause45_set_settings, + .get_settings = tenxpress_get_settings, + .set_settings = tenxpress_set_settings, + .set_npage_adv = sfx7101_set_npage_adv, .num_tests = ARRAY_SIZE(sfx7101_test_names), .test_names = sfx7101_test_names, .run_tests = sfx7101_run_tests, @@ -874,9 +839,9 @@ struct efx_phy_operations falcon_sft9001_phy_ops = { .poll = tenxpress_phy_poll, .fini = tenxpress_phy_fini, .clear_interrupt = efx_port_dummy_op_void, - .get_settings = sft9001_get_settings, - .set_settings = sft9001_set_settings, - .set_xnp_advertise = sft9001_set_xnp_advertise, + .get_settings = tenxpress_get_settings, + .set_settings = tenxpress_set_settings, + .set_npage_adv = sft9001_set_npage_adv, .num_tests = ARRAY_SIZE(sft9001_test_names), .test_names = sft9001_test_names, .run_tests = sft9001_run_tests, diff --git a/drivers/net/sfc/workarounds.h b/drivers/net/sfc/workarounds.h index b810dcdf4681..78de68f4a95b 100644 --- a/drivers/net/sfc/workarounds.h +++ b/drivers/net/sfc/workarounds.h @@ -18,7 +18,6 @@ #define EFX_WORKAROUND_ALWAYS(efx) 1 #define EFX_WORKAROUND_FALCON_A(efx) (falcon_rev(efx) <= FALCON_REV_A1) #define EFX_WORKAROUND_10G(efx) EFX_IS10G(efx) -#define EFX_WORKAROUND_SFT9001A(efx) ((efx)->phy_type == PHY_TYPE_SFT9001A) #define EFX_WORKAROUND_SFT9001(efx) ((efx)->phy_type == PHY_TYPE_SFT9001A || \ (efx)->phy_type == PHY_TYPE_SFT9001B) @@ -55,9 +54,6 @@ /* Need to send XNP pages for 100BaseT */ #define EFX_WORKAROUND_13204 EFX_WORKAROUND_SFT9001 -/* Need to keep AN enabled */ -#define EFX_WORKAROUND_13963 EFX_WORKAROUND_SFT9001A - /* Don't restart AN in near-side loopback */ #define EFX_WORKAROUND_15195 EFX_WORKAROUND_SFT9001 -- cgit v1.2.1 From 1974cc205e63cec4a17a6b3fca31fa4240ded77e Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Thu, 29 Jan 2009 18:00:07 +0000 Subject: sfc: Replace stats_enabled flag with a disable count Currently we use a spin-lock to serialise statistics fetches and also to inhibit them for short periods of time, plus a flag to enable/disable statistics fetches for longer periods of time, during online reset. This was apparently insufficient to deal with the several reasons for stats being disabled. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/efx.c | 33 ++++++++++++++++++++++----------- drivers/net/sfc/efx.h | 2 ++ drivers/net/sfc/falcon.c | 15 +++++++++++---- drivers/net/sfc/net_driver.h | 5 ++--- drivers/net/sfc/sfe4001.c | 15 ++++++++++++++- drivers/net/sfc/tenxpress.c | 12 ++++++------ 6 files changed, 57 insertions(+), 25 deletions(-) diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index b0e53087bda0..ab0e09bf154d 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -685,7 +685,7 @@ static int efx_init_port(struct efx_nic *efx) efx->mac_op->reconfigure(efx); efx->port_initialized = true; - efx->stats_enabled = true; + efx_stats_enable(efx); return 0; fail: @@ -734,6 +734,7 @@ static void efx_fini_port(struct efx_nic *efx) if (!efx->port_initialized) return; + efx_stats_disable(efx); efx->phy_op->fini(efx); efx->port_initialized = false; @@ -1360,6 +1361,20 @@ static int efx_net_stop(struct net_device *net_dev) return 0; } +void efx_stats_disable(struct efx_nic *efx) +{ + spin_lock(&efx->stats_lock); + ++efx->stats_disable_count; + spin_unlock(&efx->stats_lock); +} + +void efx_stats_enable(struct efx_nic *efx) +{ + spin_lock(&efx->stats_lock); + --efx->stats_disable_count; + spin_unlock(&efx->stats_lock); +} + /* Context: process, dev_base_lock or RTNL held, non-blocking. */ static struct net_device_stats *efx_net_stats(struct net_device *net_dev) { @@ -1368,12 +1383,12 @@ static struct net_device_stats *efx_net_stats(struct net_device *net_dev) struct net_device_stats *stats = &net_dev->stats; /* Update stats if possible, but do not wait if another thread - * is updating them (or resetting the NIC); slightly stale - * stats are acceptable. + * is updating them or if MAC stats fetches are temporarily + * disabled; slightly stale stats are acceptable. */ if (!spin_trylock(&efx->stats_lock)) return stats; - if (efx->stats_enabled) { + if (!efx->stats_disable_count) { efx->mac_op->update_stats(efx); falcon_update_nic_stats(efx); } @@ -1626,12 +1641,7 @@ void efx_reset_down(struct efx_nic *efx, enum reset_type method, { EFX_ASSERT_RESET_SERIALISED(efx); - /* The net_dev->get_stats handler is quite slow, and will fail - * if a fetch is pending over reset. Serialise against it. */ - spin_lock(&efx->stats_lock); - efx->stats_enabled = false; - spin_unlock(&efx->stats_lock); - + efx_stats_disable(efx); efx_stop_all(efx); mutex_lock(&efx->mac_lock); mutex_lock(&efx->spi_lock); @@ -1682,7 +1692,7 @@ int efx_reset_up(struct efx_nic *efx, enum reset_type method, if (ok) { efx_start_all(efx); - efx->stats_enabled = true; + efx_stats_enable(efx); } return rc; } @@ -1888,6 +1898,7 @@ static int efx_init_struct(struct efx_nic *efx, struct efx_nic_type *type, efx->rx_checksum_enabled = true; spin_lock_init(&efx->netif_stop_lock); spin_lock_init(&efx->stats_lock); + efx->stats_disable_count = 1; mutex_init(&efx->mac_lock); efx->mac_op = &efx_dummy_mac_operations; efx->phy_op = &efx_dummy_phy_operations; diff --git a/drivers/net/sfc/efx.h b/drivers/net/sfc/efx.h index ac201587a163..55d0f131b0e9 100644 --- a/drivers/net/sfc/efx.h +++ b/drivers/net/sfc/efx.h @@ -36,6 +36,8 @@ extern void efx_process_channel_now(struct efx_channel *channel); extern void efx_flush_queues(struct efx_nic *efx); /* Ports */ +extern void efx_stats_disable(struct efx_nic *efx); +extern void efx_stats_enable(struct efx_nic *efx); extern void efx_reconfigure_port(struct efx_nic *efx); extern void __efx_reconfigure_port(struct efx_nic *efx); diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index d9412f83a78e..d5378e60fcdd 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -1883,7 +1883,7 @@ static int falcon_reset_macs(struct efx_nic *efx) /* MAC stats will fail whilst the TX fifo is draining. Serialise * the drain sequence with the statistics fetch */ - spin_lock(&efx->stats_lock); + efx_stats_disable(efx); falcon_read(efx, ®, MAC0_CTRL_REG_KER); EFX_SET_OWORD_FIELD(reg, TXFIFO_DRAIN_EN_B0, 1); @@ -1913,7 +1913,7 @@ static int falcon_reset_macs(struct efx_nic *efx) udelay(10); } - spin_unlock(&efx->stats_lock); + efx_stats_enable(efx); /* If we've reset the EM block and the link is up, then * we'll have to kick the XAUI link so the PHY can recover */ @@ -2273,6 +2273,10 @@ int falcon_switch_mac(struct efx_nic *efx) struct efx_mac_operations *old_mac_op = efx->mac_op; efx_oword_t nic_stat; unsigned strap_val; + int rc = 0; + + /* Don't try to fetch MAC stats while we're switching MACs */ + efx_stats_disable(efx); /* Internal loopbacks override the phy speed setting */ if (efx->loopback_mode == LOOPBACK_GMAC) { @@ -2302,13 +2306,16 @@ int falcon_switch_mac(struct efx_nic *efx) } if (old_mac_op == efx->mac_op) - return 0; + goto out; EFX_LOG(efx, "selected %cMAC\n", EFX_IS10G(efx) ? 'X' : 'G'); /* Not all macs support a mac-level link state */ efx->mac_up = true; - return falcon_reset_macs(efx); + rc = falcon_reset_macs(efx); +out: + efx_stats_enable(efx); + return rc; } /* This call is responsible for hooking in the MAC and PHY operations */ diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index 8eb411a1c82e..e019ad1fb9a0 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -754,8 +754,7 @@ union efx_multicast_hash { * &struct net_device_stats. * @stats_buffer: DMA buffer for statistics * @stats_lock: Statistics update lock. Serialises statistics fetches - * @stats_enabled: Temporarily disable statistics fetches. - * Serialised by @stats_lock + * @stats_disable_count: Nest count for disabling statistics fetches * @mac_op: MAC interface * @mac_address: Permanent MAC address * @phy_type: PHY type @@ -837,7 +836,7 @@ struct efx_nic { struct efx_mac_stats mac_stats; struct efx_buffer stats_buffer; spinlock_t stats_lock; - bool stats_enabled; + unsigned int stats_disable_count; struct efx_mac_operations *mac_op; unsigned char mac_address[ETH_ALEN]; diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c index 853057e87fb2..cb25ae5b257a 100644 --- a/drivers/net/sfc/sfe4001.c +++ b/drivers/net/sfc/sfe4001.c @@ -235,12 +235,18 @@ static ssize_t set_phy_flash_cfg(struct device *dev, } else if (efx->state != STATE_RUNNING || netif_running(efx->net_dev)) { err = -EBUSY; } else { + /* Reset the PHY, reconfigure the MAC and enable/disable + * MAC stats accordingly. */ efx->phy_mode = new_mode; + if (new_mode & PHY_MODE_SPECIAL) + efx_stats_disable(efx); if (efx->board_info.type == EFX_BOARD_SFE4001) err = sfe4001_poweron(efx); else err = sfn4111t_reset(efx); efx_reconfigure_port(efx); + if (!(new_mode & PHY_MODE_SPECIAL)) + efx_stats_enable(efx); } rtnl_unlock(); @@ -329,6 +335,11 @@ int sfe4001_init(struct efx_nic *efx) efx->board_info.monitor = sfe4001_check_hw; efx->board_info.fini = sfe4001_fini; + if (efx->phy_mode & PHY_MODE_SPECIAL) { + /* PHY won't generate a 156.25 MHz clock and MAC stats fetch + * will fail. */ + efx_stats_disable(efx); + } rc = sfe4001_poweron(efx); if (rc) goto fail_ioexp; @@ -405,8 +416,10 @@ int sfn4111t_init(struct efx_nic *efx) if (rc) goto fail_hwmon; - if (efx->phy_mode & PHY_MODE_SPECIAL) + if (efx->phy_mode & PHY_MODE_SPECIAL) { + efx_stats_disable(efx); sfn4111t_reset(efx); + } return 0; diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c index 412d209d8313..f0efd246962c 100644 --- a/drivers/net/sfc/tenxpress.c +++ b/drivers/net/sfc/tenxpress.c @@ -370,8 +370,8 @@ static int tenxpress_special_reset(struct efx_nic *efx) /* The XGMAC clock is driven from the SFC7101/SFT9001 312MHz clock, so * a special software reset can glitch the XGMAC sufficiently for stats - * requests to fail. Since we don't often special_reset, just lock. */ - spin_lock(&efx->stats_lock); + * requests to fail. */ + efx_stats_disable(efx); /* Initiate reset */ reg = mdio_clause45_read(efx, efx->mii.phy_id, @@ -386,17 +386,17 @@ static int tenxpress_special_reset(struct efx_nic *efx) rc = mdio_clause45_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS); if (rc < 0) - goto unlock; + goto out; /* Try and reconfigure the device */ rc = tenxpress_init(efx); if (rc < 0) - goto unlock; + goto out; /* Wait for the XGXS state machine to churn */ mdelay(10); -unlock: - spin_unlock(&efx->stats_lock); +out: + efx_stats_enable(efx); return rc; } -- cgit v1.2.1 From 905db44087855e3c1709f538ecdc22fd149cadd8 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 30 Jan 2009 14:12:06 -0800 Subject: packet: Avoid lock_sock in mmap handler MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As the mmap handler gets called under mmap_sem, and we may grab mmap_sem elsewhere under the socket lock to access user data, we should avoid grabbing the socket lock in the mmap handler. Since the only thing we care about in the mmap handler is for pg_vec* to be invariant, i.e., to exclude packet_set_ring, we can achieve this by simply using a new mutex. Signed-off-by: Herbert Xu Tested-by: Martin MOKREJŠ Signed-off-by: David S. Miller --- net/packet/af_packet.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index 5f94db2f3e9e..9454d4ae46df 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -77,6 +77,7 @@ #include #include #include +#include #ifdef CONFIG_INET #include @@ -175,6 +176,7 @@ struct packet_sock { #endif struct packet_type prot_hook; spinlock_t bind_lock; + struct mutex pg_vec_lock; unsigned int running:1, /* prot_hook is attached*/ auxdata:1, origdev:1; @@ -1069,6 +1071,7 @@ static int packet_create(struct net *net, struct socket *sock, int protocol) */ spin_lock_init(&po->bind_lock); + mutex_init(&po->pg_vec_lock); po->prot_hook.func = packet_rcv; if (sock->type == SOCK_PACKET) @@ -1865,6 +1868,7 @@ static int packet_set_ring(struct sock *sk, struct tpacket_req *req, int closing synchronize_net(); err = -EBUSY; + mutex_lock(&po->pg_vec_lock); if (closing || atomic_read(&po->mapped) == 0) { err = 0; #define XC(a, b) ({ __typeof__ ((a)) __t; __t = (a); (a) = (b); __t; }) @@ -1886,6 +1890,7 @@ static int packet_set_ring(struct sock *sk, struct tpacket_req *req, int closing if (atomic_read(&po->mapped)) printk(KERN_DEBUG "packet_mmap: vma is busy: %d\n", atomic_read(&po->mapped)); } + mutex_unlock(&po->pg_vec_lock); spin_lock(&po->bind_lock); if (was_running && !po->running) { @@ -1918,7 +1923,7 @@ static int packet_mmap(struct file *file, struct socket *sock, struct vm_area_st size = vma->vm_end - vma->vm_start; - lock_sock(sk); + mutex_lock(&po->pg_vec_lock); if (po->pg_vec == NULL) goto out; if (size != po->pg_vec_len*po->pg_vec_pages*PAGE_SIZE) @@ -1941,7 +1946,7 @@ static int packet_mmap(struct file *file, struct socket *sock, struct vm_area_st err = 0; out: - release_sock(sk); + mutex_unlock(&po->pg_vec_lock); return err; } #endif -- cgit v1.2.1 From 7fc49f19813030f2e15ad2ccec5cb701f7f4a3ec Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Tue, 27 Jan 2009 21:45:57 +0100 Subject: x86 setup: fix asm constraints in vesa_store_edid Impact: fix potential miscompile (currently believed non-manifest) As the comment explains, the VBE DDC call can clobber any register. Tell the compiler about that fact. Signed-off-by: Andreas Schwab Signed-off-by: H. Peter Anvin Signed-off-by: Ingo Molnar --- arch/x86/boot/video-vesa.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c index 75115849af33..4a58c8ce3f69 100644 --- a/arch/x86/boot/video-vesa.c +++ b/arch/x86/boot/video-vesa.c @@ -269,9 +269,8 @@ void vesa_store_edid(void) we genuinely have to assume all registers are destroyed here. */ asm("pushw %%es; movw %2,%%es; "INT10"; popw %%es" - : "+a" (ax), "+b" (bx) - : "c" (cx), "D" (di) - : "esi"); + : "+a" (ax), "+b" (bx), "+c" (cx), "+D" (di) + : : "esi", "edx"); if (ax != 0x004f) return; /* No EDID */ @@ -285,9 +284,9 @@ void vesa_store_edid(void) dx = 0; /* EDID block number */ di =(size_t) &boot_params.edid_info; /* (ES:)Pointer to block */ asm(INT10 - : "+a" (ax), "+b" (bx), "+d" (dx), "=m" (boot_params.edid_info) - : "c" (cx), "D" (di) - : "esi"); + : "+a" (ax), "+b" (bx), "+d" (dx), "=m" (boot_params.edid_info), + "+c" (cx), "+D" (di) + : : "esi"); #endif /* CONFIG_FIRMWARE_EDID */ } -- cgit v1.2.1 From 5d6e430d3bafe743b18dc443189093bf532e91ed Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sat, 31 Jan 2009 00:51:49 -0800 Subject: ipv6: compile fix for ip6mr.c net/ipv6/ip6mr.c: In function 'pim6_rcv': net/ipv6/ip6mr.c:368: error: implicit declaration of function 'csum_ipv6_magic' Signed-off-by: Dave Jones Signed-off-by: David S. Miller --- net/ipv6/ip6mr.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c index d19a84b79503..228be551e9c1 100644 --- a/net/ipv6/ip6mr.c +++ b/net/ipv6/ip6mr.c @@ -48,6 +48,7 @@ #include #include #include +#include /* Big lock, protecting vif table, mrt cache and mroute socket state. Note that the changes are semaphored via rtnl_lock. -- cgit v1.2.1 From bbd98fe48a43464b4a044bc4cbeefad284d6aa80 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Sat, 31 Jan 2009 00:52:30 -0800 Subject: igb: Fix DCA errors and do not use context index for 82576 82576 was being incorrectly flagged as needing a context index. It does not as each ring has it's own table of 2 contexts. Driver was registering after registering the driver instead of the other way around. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igb/igb.h | 9 ++++----- drivers/net/igb/igb_main.c | 16 ++++++---------- 2 files changed, 10 insertions(+), 15 deletions(-) diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h index 5a27825cc48a..aebef8e48e76 100644 --- a/drivers/net/igb/igb.h +++ b/drivers/net/igb/igb.h @@ -300,11 +300,10 @@ struct igb_adapter { #define IGB_FLAG_HAS_MSI (1 << 0) #define IGB_FLAG_MSI_ENABLE (1 << 1) -#define IGB_FLAG_HAS_DCA (1 << 2) -#define IGB_FLAG_DCA_ENABLED (1 << 3) -#define IGB_FLAG_IN_NETPOLL (1 << 5) -#define IGB_FLAG_QUAD_PORT_A (1 << 6) -#define IGB_FLAG_NEED_CTX_IDX (1 << 7) +#define IGB_FLAG_DCA_ENABLED (1 << 2) +#define IGB_FLAG_IN_NETPOLL (1 << 3) +#define IGB_FLAG_QUAD_PORT_A (1 << 4) +#define IGB_FLAG_NEED_CTX_IDX (1 << 5) enum e1000_state_t { __IGB_TESTING, diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index b82b0fb2056c..cc94412ddf89 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -206,10 +206,11 @@ static int __init igb_init_module(void) global_quad_port_a = 0; - ret = pci_register_driver(&igb_driver); #ifdef CONFIG_IGB_DCA dca_register_notify(&dca_notifier); #endif + + ret = pci_register_driver(&igb_driver); return ret; } @@ -1156,11 +1157,10 @@ static int __devinit igb_probe(struct pci_dev *pdev, /* set flags */ switch (hw->mac.type) { - case e1000_82576: case e1000_82575: - adapter->flags |= IGB_FLAG_HAS_DCA; adapter->flags |= IGB_FLAG_NEED_CTX_IDX; break; + case e1000_82576: default: break; } @@ -1310,8 +1310,7 @@ static int __devinit igb_probe(struct pci_dev *pdev, goto err_register; #ifdef CONFIG_IGB_DCA - if ((adapter->flags & IGB_FLAG_HAS_DCA) && - (dca_add_requester(&pdev->dev) == 0)) { + if (dca_add_requester(&pdev->dev) == 0) { adapter->flags |= IGB_FLAG_DCA_ENABLED; dev_info(&pdev->dev, "DCA enabled\n"); /* Always use CB2 mode, difference is masked @@ -3473,19 +3472,16 @@ static int __igb_notify_dca(struct device *dev, void *data) struct e1000_hw *hw = &adapter->hw; unsigned long event = *(unsigned long *)data; - if (!(adapter->flags & IGB_FLAG_HAS_DCA)) - goto out; - switch (event) { case DCA_PROVIDER_ADD: /* if already enabled, don't do it again */ if (adapter->flags & IGB_FLAG_DCA_ENABLED) break; - adapter->flags |= IGB_FLAG_DCA_ENABLED; /* Always use CB2 mode, difference is masked * in the CB driver. */ wr32(E1000_DCA_CTRL, 2); if (dca_add_requester(dev) == 0) { + adapter->flags |= IGB_FLAG_DCA_ENABLED; dev_info(&adapter->pdev->dev, "DCA enabled\n"); igb_setup_dca(adapter); break; @@ -3502,7 +3498,7 @@ static int __igb_notify_dca(struct device *dev, void *data) } break; } -out: + return 0; } -- cgit v1.2.1 From ec54d7d6e40b04c16dfce0e41e506198a20c8645 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Sat, 31 Jan 2009 00:52:57 -0800 Subject: igb: prevent skb_over panic w/ mtu smaller than 1K A panic has been observed with frame sizes smaller than 1K. This has been root caused to the hardware spanning larger frames across multiple buffers and then reporting the original frame size in the first descriptor. To prevent this we can enable set the LPE bit which in turn will restrict packet sizes to those set in the RLPML register. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igb/igb_main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index cc94412ddf89..a50db5398fa5 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1834,11 +1834,11 @@ static void igb_setup_rctl(struct igb_adapter *adapter) rctl |= E1000_RCTL_SECRC; /* - * disable store bad packets, long packet enable, and clear size bits. + * disable store bad packets and clear size bits. */ - rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_LPE | E1000_RCTL_SZ_256); + rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_SZ_256); - if (adapter->netdev->mtu > ETH_DATA_LEN) + /* enable LPE when to prevent packets larger than max_frame_size */ rctl |= E1000_RCTL_LPE; /* Setup buffer sizes */ @@ -1864,7 +1864,7 @@ static void igb_setup_rctl(struct igb_adapter *adapter) */ /* allocations using alloc_page take too long for regular MTU * so only enable packet split for jumbo frames */ - if (rctl & E1000_RCTL_LPE) { + if (adapter->netdev->mtu > ETH_DATA_LEN) { adapter->rx_ps_hdr_size = IGB_RXBUFFER_128; srrctl |= adapter->rx_ps_hdr_size << E1000_SRRCTL_BSIZEHDRSIZE_SHIFT; -- cgit v1.2.1 From 5d0932a5dd00d83df5d1e15eeffb6edf015a8579 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Sat, 31 Jan 2009 00:53:18 -0800 Subject: igb: fix link reporting when using sgmii When using sgmii the link was not being properly passed up to the driver from the underlying link management functions. This change corrects it so that get_link_status is cleared when a link has been found. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igb/e1000_82575.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index f5e2e7235fcb..13ca73f96ec6 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -699,11 +699,18 @@ static s32 igb_check_for_link_82575(struct e1000_hw *hw) /* SGMII link check is done through the PCS register. */ if ((hw->phy.media_type != e1000_media_type_copper) || - (igb_sgmii_active_82575(hw))) + (igb_sgmii_active_82575(hw))) { ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed, &duplex); - else + /* + * Use this flag to determine if link needs to be checked or + * not. If we have link clear the flag so that we do not + * continue to check for link. + */ + hw->mac.get_link_status = !hw->mac.serdes_has_link; + } else { ret_val = igb_check_for_copper_link(hw); + } return ret_val; } -- cgit v1.2.1 From 92ab78315c638515d0e81b0c70b2082f713582d9 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sat, 31 Jan 2009 17:24:43 +0100 Subject: x86/Voyager: make it build and boot [ mingo@elte.hu: these fixes are a subset of changes cherry-picked from: git://git.kernel.org:/pub/scm/linux/kernel/git/jejb/voyager-2.6.git They fix various problems that recent x86 changes caused in the Voyager subarchitecture: both APIC changes and cpumask changes and certain cleanups caused subarch assumptions to break. Most of these changes are obsolete as the subarch code has been removed from the x86 development tree - but we merge them upstream to make Voyager build and boot. ] Signed-off-by: James Bottomley Signed-off-by: Ingo Molnar --- arch/x86/kernel/irqinit_32.c | 12 ------------ arch/x86/mach-default/setup.c | 12 ++++++++++++ arch/x86/mach-voyager/setup.c | 12 +++++++++++- arch/x86/mach-voyager/voyager_smp.c | 25 ++++++++++++------------- 4 files changed, 35 insertions(+), 26 deletions(-) diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c index 1507ad4e674d..10a09c2f1828 100644 --- a/arch/x86/kernel/irqinit_32.c +++ b/arch/x86/kernel/irqinit_32.c @@ -78,15 +78,6 @@ void __init init_ISA_irqs(void) } } -/* - * IRQ2 is cascade interrupt to second interrupt controller - */ -static struct irqaction irq2 = { - .handler = no_action, - .mask = CPU_MASK_NONE, - .name = "cascade", -}; - DEFINE_PER_CPU(vector_irq_t, vector_irq) = { [0 ... IRQ0_VECTOR - 1] = -1, [IRQ0_VECTOR] = 0, @@ -178,9 +169,6 @@ void __init native_init_IRQ(void) alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); #endif - if (!acpi_ioapic) - setup_irq(2, &irq2); - /* setup after call gates are initialised (usually add in * the architecture specific gates) */ diff --git a/arch/x86/mach-default/setup.c b/arch/x86/mach-default/setup.c index df167f265622..a265a7c63190 100644 --- a/arch/x86/mach-default/setup.c +++ b/arch/x86/mach-default/setup.c @@ -38,6 +38,15 @@ void __init pre_intr_init_hook(void) init_ISA_irqs(); } +/* + * IRQ2 is cascade interrupt to second interrupt controller + */ +static struct irqaction irq2 = { + .handler = no_action, + .mask = CPU_MASK_NONE, + .name = "cascade", +}; + /** * intr_init_hook - post gate setup interrupt initialisation * @@ -53,6 +62,9 @@ void __init intr_init_hook(void) if (x86_quirks->arch_intr_init()) return; } + if (!acpi_ioapic) + setup_irq(2, &irq2); + } /** diff --git a/arch/x86/mach-voyager/setup.c b/arch/x86/mach-voyager/setup.c index a580b9562e76..d914a7996a66 100644 --- a/arch/x86/mach-voyager/setup.c +++ b/arch/x86/mach-voyager/setup.c @@ -33,13 +33,23 @@ void __init intr_init_hook(void) setup_irq(2, &irq2); } -void __init pre_setup_arch_hook(void) +static void voyager_disable_tsc(void) { /* Voyagers run their CPUs from independent clocks, so disable * the TSC code because we can't sync them */ setup_clear_cpu_cap(X86_FEATURE_TSC); } +void __init pre_setup_arch_hook(void) +{ + voyager_disable_tsc(); +} + +void __init pre_time_init_hook(void) +{ + voyager_disable_tsc(); +} + void __init trap_init_hook(void) { } diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c index 9840b7ec749a..7ffcdeec4631 100644 --- a/arch/x86/mach-voyager/voyager_smp.c +++ b/arch/x86/mach-voyager/voyager_smp.c @@ -81,7 +81,7 @@ static void enable_local_vic_irq(unsigned int irq); static void disable_local_vic_irq(unsigned int irq); static void before_handle_vic_irq(unsigned int irq); static void after_handle_vic_irq(unsigned int irq); -static void set_vic_irq_affinity(unsigned int irq, cpumask_t mask); +static void set_vic_irq_affinity(unsigned int irq, const struct cpumask *mask); static void ack_vic_irq(unsigned int irq); static void vic_enable_cpi(void); static void do_boot_cpu(__u8 cpuid); @@ -211,8 +211,6 @@ static __u32 cpu_booted_map; static cpumask_t smp_commenced_mask = CPU_MASK_NONE; /* This is for the new dynamic CPU boot code */ -cpumask_t cpu_callin_map = CPU_MASK_NONE; -cpumask_t cpu_callout_map = CPU_MASK_NONE; /* The per processor IRQ masks (these are usually kept in sync) */ static __u16 vic_irq_mask[NR_CPUS] __cacheline_aligned; @@ -378,7 +376,7 @@ void __init find_smp_config(void) cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 3) << 24; - cpu_possible_map = phys_cpu_present_map; + init_cpu_possible(&phys_cpu_present_map); printk("VOYAGER SMP: phys_cpu_present_map = 0x%lx\n", cpus_addr(phys_cpu_present_map)[0]); /* Here we set up the VIC to enable SMP */ @@ -1599,16 +1597,16 @@ static void after_handle_vic_irq(unsigned int irq) * change the mask and then do an interrupt enable CPI to re-enable on * the selected processors */ -void set_vic_irq_affinity(unsigned int irq, cpumask_t mask) +void set_vic_irq_affinity(unsigned int irq, const struct cpumask *mask) { /* Only extended processors handle interrupts */ unsigned long real_mask; unsigned long irq_mask = 1 << irq; int cpu; - real_mask = cpus_addr(mask)[0] & voyager_extended_vic_processors; + real_mask = cpus_addr(*mask)[0] & voyager_extended_vic_processors; - if (cpus_addr(mask)[0] == 0) + if (cpus_addr(*mask)[0] == 0) /* can't have no CPUs to accept the interrupt -- extremely * bad things will happen */ return; @@ -1750,10 +1748,11 @@ static void __cpuinit voyager_smp_prepare_boot_cpu(void) init_gdt(smp_processor_id()); switch_to_new_gdt(); - cpu_set(smp_processor_id(), cpu_online_map); - cpu_set(smp_processor_id(), cpu_callout_map); - cpu_set(smp_processor_id(), cpu_possible_map); - cpu_set(smp_processor_id(), cpu_present_map); + cpu_online_map = cpumask_of_cpu(smp_processor_id()); + cpu_callout_map = cpumask_of_cpu(smp_processor_id()); + cpu_callin_map = CPU_MASK_NONE; + cpu_present_map = cpumask_of_cpu(smp_processor_id()); + } static int __cpuinit voyager_cpu_up(unsigned int cpu) @@ -1783,9 +1782,9 @@ void __init smp_setup_processor_id(void) x86_write_percpu(cpu_number, hard_smp_processor_id()); } -static void voyager_send_call_func(cpumask_t callmask) +static void voyager_send_call_func(const struct cpumask *callmask) { - __u32 mask = cpus_addr(callmask)[0] & ~(1 << smp_processor_id()); + __u32 mask = cpus_addr(*callmask)[0] & ~(1 << smp_processor_id()); send_CPI(mask, VIC_CALL_FUNCTION_CPI); } -- cgit v1.2.1 From fc8744adc870a8d4366908221508bb113d8b72ee Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 31 Jan 2009 15:08:56 -0800 Subject: Stop playing silly games with the VM_ACCOUNT flag The mmap_region() code would temporarily set the VM_ACCOUNT flag for anonymous shared mappings just to inform shmem_zero_setup() that it should enable accounting for the resulting shm object. It would then clear the flag after calling ->mmap (for the /dev/zero case) or doing shmem_zero_setup() (for the MAP_ANON case). This just resulted in vma merge issues, but also made for just unnecessary confusion. Use the already-existing VM_NORESERVE flag for this instead, and let shmem_{zero|file}_setup() just figure it out from that. This also happens to make it obvious that the new DRI2 GEM layer uses a non-reserving backing store for its object allocation - which is quite possibly not intentional. But since I didn't want to change semantics in this patch, I left it alone, and just updated the caller to use the new flag semantics. Signed-off-by: Linus Torvalds --- drivers/gpu/drm/drm_gem.c | 2 +- ipc/shm.c | 4 ++-- mm/mmap.c | 48 ++++++++++++++++++++++++----------------------- mm/shmem.c | 2 +- 4 files changed, 29 insertions(+), 27 deletions(-) diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c index 9da581452874..6915fb82d0b0 100644 --- a/drivers/gpu/drm/drm_gem.c +++ b/drivers/gpu/drm/drm_gem.c @@ -136,7 +136,7 @@ drm_gem_object_alloc(struct drm_device *dev, size_t size) obj = kcalloc(1, sizeof(*obj), GFP_KERNEL); obj->dev = dev; - obj->filp = shmem_file_setup("drm mm object", size, 0); + obj->filp = shmem_file_setup("drm mm object", size, VM_NORESERVE); if (IS_ERR(obj->filp)) { kfree(obj); return NULL; diff --git a/ipc/shm.c b/ipc/shm.c index a9e09ad2263e..c0a021f7f41a 100644 --- a/ipc/shm.c +++ b/ipc/shm.c @@ -368,14 +368,14 @@ static int newseg(struct ipc_namespace *ns, struct ipc_params *params) file = hugetlb_file_setup(name, size); shp->mlock_user = current_user(); } else { - int acctflag = VM_ACCOUNT; + int acctflag = 0; /* * Do not allow no accounting for OVERCOMMIT_NEVER, even * if it's asked for. */ if ((shmflg & SHM_NORESERVE) && sysctl_overcommit_memory != OVERCOMMIT_NEVER) - acctflag = 0; + acctflag = VM_NORESERVE; file = shmem_file_setup(name, size, acctflag); } error = PTR_ERR(file); diff --git a/mm/mmap.c b/mm/mmap.c index c581df14d0de..214b6a258eeb 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -1090,6 +1090,15 @@ int vma_wants_writenotify(struct vm_area_struct *vma) mapping_cap_account_dirty(vma->vm_file->f_mapping); } +/* + * We account for memory if it's a private writeable mapping, + * and VM_NORESERVE wasn't set. + */ +static inline int accountable_mapping(unsigned int vm_flags) +{ + return (vm_flags & (VM_NORESERVE | VM_SHARED | VM_WRITE)) == VM_WRITE; +} + unsigned long mmap_region(struct file *file, unsigned long addr, unsigned long len, unsigned long flags, unsigned int vm_flags, unsigned long pgoff, @@ -1117,23 +1126,24 @@ munmap_back: if (!may_expand_vm(mm, len >> PAGE_SHIFT)) return -ENOMEM; - if (flags & MAP_NORESERVE) + /* + * Set 'VM_NORESERVE' if we should not account for the + * memory use of this mapping. We only honor MAP_NORESERVE + * if we're allowed to overcommit memory. + */ + if ((flags & MAP_NORESERVE) && sysctl_overcommit_memory != OVERCOMMIT_NEVER) + vm_flags |= VM_NORESERVE; + if (!accountable) vm_flags |= VM_NORESERVE; - if (accountable && (!(flags & MAP_NORESERVE) || - sysctl_overcommit_memory == OVERCOMMIT_NEVER)) { - if (vm_flags & VM_SHARED) { - /* Check memory availability in shmem_file_setup? */ - vm_flags |= VM_ACCOUNT; - } else if (vm_flags & VM_WRITE) { - /* - * Private writable mapping: check memory availability - */ - charged = len >> PAGE_SHIFT; - if (security_vm_enough_memory(charged)) - return -ENOMEM; - vm_flags |= VM_ACCOUNT; - } + /* + * Private writable mapping: check memory availability + */ + if (accountable_mapping(vm_flags)) { + charged = len >> PAGE_SHIFT; + if (security_vm_enough_memory(charged)) + return -ENOMEM; + vm_flags |= VM_ACCOUNT; } /* @@ -1184,14 +1194,6 @@ munmap_back: goto free_vma; } - /* We set VM_ACCOUNT in a shared mapping's vm_flags, to inform - * shmem_zero_setup (perhaps called through /dev/zero's ->mmap) - * that memory reservation must be checked; but that reservation - * belongs to shared memory object, not to vma: so now clear it. - */ - if ((vm_flags & (VM_SHARED|VM_ACCOUNT)) == (VM_SHARED|VM_ACCOUNT)) - vma->vm_flags &= ~VM_ACCOUNT; - /* Can addr have changed?? * * Answer: Yes, several device drivers can do it in their diff --git a/mm/shmem.c b/mm/shmem.c index 5d0de96c9789..19d566ccdeea 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -2628,7 +2628,7 @@ struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags) goto close_file; #ifdef CONFIG_SHMEM - SHMEM_I(inode)->flags = flags & VM_ACCOUNT; + SHMEM_I(inode)->flags = (flags & VM_NORESERVE) ? 0 : VM_ACCOUNT; #endif d_instantiate(dentry, inode); inode->i_size = size; -- cgit v1.2.1 From 878b8619f711280fd05845e21956434b5e588cc4 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Fri, 30 Jan 2009 15:27:14 -0500 Subject: Fix memory corruption in console selection Fix an off-by-two memory error in console selection. The loop below goes from sel_start to sel_end (inclusive), so it writes one more character. This one more character was added to the allocated size (+1), but it was not multiplied by an UTF-8 multiplier. This patch fixes a memory corruption when UTF-8 console is used and the user selects a few characters, all of them 3-byte in UTF-8 (for example a frame line). When memory redzones are enabled, a redzone corruption is reported. When they are not enabled, trashing of random memory occurs. Signed-off-by: Mikulas Patocka Signed-off-by: Linus Torvalds --- drivers/char/selection.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/selection.c b/drivers/char/selection.c index f29fbe9b8ed7..cb8ca5698963 100644 --- a/drivers/char/selection.c +++ b/drivers/char/selection.c @@ -268,7 +268,7 @@ int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *t /* Allocate a new buffer before freeing the old one ... */ multiplier = use_unicode ? 3 : 1; /* chars can take up to 3 bytes */ - bp = kmalloc((sel_end-sel_start)/2*multiplier+1, GFP_KERNEL); + bp = kmalloc(((sel_end-sel_start)/2+1)*multiplier, GFP_KERNEL); if (!bp) { printk(KERN_WARNING "selection: kmalloc() failed\n"); clear_selection(); -- cgit v1.2.1 From d942fb6c7d391baba3dddb566eb735fbf3df8528 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 26 Jan 2009 17:56:17 +0100 Subject: sched: fix sync wakeups Pawel Dziekonski reported that the openssl benchmark and his quantum chemistry application both show slowdowns due to the scheduler under-parallelizing execution. The reason are pipe wakeups still doing 'sync' wakeups which overrides the normal buddy wakeup logic - even if waker and wakee are loosely coupled. Fix an inversion of logic in the buddy wakeup code. Reported-by: Pawel Dziekonski Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched.c | 4 ++++ kernel/sched_fair.c | 11 ++--------- 2 files changed, 6 insertions(+), 9 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 52bbf1c842a8..770b1f9ebe14 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2266,6 +2266,10 @@ static int try_to_wake_up(struct task_struct *p, unsigned int state, int sync) if (!sched_feat(SYNC_WAKEUPS)) sync = 0; + if (!sync && (current->se.avg_overlap < sysctl_sched_migration_cost && + p->se.avg_overlap < sysctl_sched_migration_cost)) + sync = 1; + #ifdef CONFIG_SMP if (sched_feat(LB_WAKEUP_UPDATE)) { struct sched_domain *sd; diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 5cc1c162044f..fdc417504681 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -1179,20 +1179,15 @@ wake_affine(struct sched_domain *this_sd, struct rq *this_rq, int idx, unsigned long load, unsigned long this_load, unsigned int imbalance) { - struct task_struct *curr = this_rq->curr; - struct task_group *tg; unsigned long tl = this_load; unsigned long tl_per_task; + struct task_group *tg; unsigned long weight; int balanced; if (!(this_sd->flags & SD_WAKE_AFFINE) || !sched_feat(AFFINE_WAKEUPS)) return 0; - if (sync && (curr->se.avg_overlap > sysctl_sched_migration_cost || - p->se.avg_overlap > sysctl_sched_migration_cost)) - sync = 0; - /* * If sync wakeup then subtract the (maximum possible) * effect of the currently running task from the load @@ -1419,9 +1414,7 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p, int sync) if (!sched_feat(WAKEUP_PREEMPT)) return; - if (sched_feat(WAKEUP_OVERLAP) && (sync || - (se->avg_overlap < sysctl_sched_migration_cost && - pse->avg_overlap < sysctl_sched_migration_cost))) { + if (sched_feat(WAKEUP_OVERLAP) && sync) { resched_task(curr); return; } -- cgit v1.2.1 From 1596e29773eadd96b0a5fc6e736afa52394cafda Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 28 Jan 2009 14:51:38 +0100 Subject: sched: symmetric sync vs avg_overlap Reinstate the weakening of the sync hint if set. This yields a more symmetric usage of avg_overlap. Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 770b1f9ebe14..242d0d47a70d 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2266,9 +2266,15 @@ static int try_to_wake_up(struct task_struct *p, unsigned int state, int sync) if (!sched_feat(SYNC_WAKEUPS)) sync = 0; - if (!sync && (current->se.avg_overlap < sysctl_sched_migration_cost && - p->se.avg_overlap < sysctl_sched_migration_cost)) - sync = 1; + if (!sync) { + if (current->se.avg_overlap < sysctl_sched_migration_cost && + p->se.avg_overlap < sysctl_sched_migration_cost) + sync = 1; + } else { + if (current->se.avg_overlap >= sysctl_sched_migration_cost || + p->se.avg_overlap >= sysctl_sched_migration_cost) + sync = 0; + } #ifdef CONFIG_SMP if (sched_feat(LB_WAKEUP_UPDATE)) { -- cgit v1.2.1 From a9f3e2b549f83a9cdab873abf4140be27c05a3f2 Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Wed, 28 Jan 2009 14:51:39 +0100 Subject: sched: clear buddies more aggressively It was noticed that a task could get re-elected past its run quota due to buddy affinities. This could increase latency a little. Cure it by more aggresively clearing buddy state. We do so in two situations: - when we force preempt - when we select a buddy to run Signed-off-by: Mike Galbraith Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index fdc417504681..75248b9ff4c1 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -768,8 +768,14 @@ check_preempt_tick(struct cfs_rq *cfs_rq, struct sched_entity *curr) ideal_runtime = sched_slice(cfs_rq, curr); delta_exec = curr->sum_exec_runtime - curr->prev_sum_exec_runtime; - if (delta_exec > ideal_runtime) + if (delta_exec > ideal_runtime) { resched_task(rq_of(cfs_rq)->curr); + /* + * The current task ran long enough, ensure it doesn't get + * re-elected due to buddy favours. + */ + clear_buddies(cfs_rq, curr); + } } static void @@ -1445,6 +1451,11 @@ static struct task_struct *pick_next_task_fair(struct rq *rq) do { se = pick_next_entity(cfs_rq); + /* + * If se was a buddy, clear it so that it will have to earn + * the favour again. + */ + clear_buddies(cfs_rq, se); set_next_entity(cfs_rq, se); cfs_rq = group_cfs_rq(se); } while (cfs_rq); -- cgit v1.2.1 From a571bbeafbcc501d9989fbce1cddcd810bd51d71 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 28 Jan 2009 14:51:40 +0100 Subject: sched: fix buddie group latency Similar to the previous patch, by not clearing buddies we can select entities past their run quota, which can increase latency. This means we have to clear group buddies as well. Do not use the group clear for pick_next_task(), otherwise that'll get O(n^2). Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 75248b9ff4c1..a7e50ba185ac 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -719,7 +719,7 @@ enqueue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int wakeup) __enqueue_entity(cfs_rq, se); } -static void clear_buddies(struct cfs_rq *cfs_rq, struct sched_entity *se) +static void __clear_buddies(struct cfs_rq *cfs_rq, struct sched_entity *se) { if (cfs_rq->last == se) cfs_rq->last = NULL; @@ -728,6 +728,12 @@ static void clear_buddies(struct cfs_rq *cfs_rq, struct sched_entity *se) cfs_rq->next = NULL; } +static void clear_buddies(struct cfs_rq *cfs_rq, struct sched_entity *se) +{ + for_each_sched_entity(se) + __clear_buddies(cfs_rq_of(se), se); +} + static void dequeue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int sleep) { @@ -1455,7 +1461,7 @@ static struct task_struct *pick_next_task_fair(struct rq *rq) * If se was a buddy, clear it so that it will have to earn * the favour again. */ - clear_buddies(cfs_rq, se); + __clear_buddies(cfs_rq, se); set_next_entity(cfs_rq, se); cfs_rq = group_cfs_rq(se); } while (cfs_rq); -- cgit v1.2.1 From 3d398703ef06fd97b4c28c86b580546d5b57e7b7 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Sat, 31 Jan 2009 23:21:24 +1030 Subject: sched_rt: don't use first_cpu on cpumask created with cpumask_and cpumask_and() only initializes nr_cpu_ids bits, so the (deprecated) first_cpu() might find one of those uninitialized bits if nr_cpu_ids is less than NR_CPUS (as it can be for CONFIG_CPUMASK_OFFSTACK). Signed-off-by: Rusty Russell Signed-off-by: Ingo Molnar --- kernel/sched_rt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index 954e1a81b796..bac1061cea2f 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -968,8 +968,8 @@ static inline int pick_optimal_cpu(int this_cpu, cpumask_t *mask) if ((this_cpu != -1) && cpu_isset(this_cpu, *mask)) return this_cpu; - first = first_cpu(*mask); - if (first != NR_CPUS) + first = cpumask_first(mask); + if (first < nr_cpu_ids) return first; return -1; -- cgit v1.2.1 From 9a8ecae87a2b698964b1db9ea504ba1099f479fc Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sat, 31 Jan 2009 20:12:14 -0500 Subject: x86: add cache descriptors for Intel Core i7 Signed-off-by: Dave Jones Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/intel_cacheinfo.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 48533d77be78..da299eb85fc0 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -36,8 +36,11 @@ static struct _cache_table cache_table[] __cpuinitdata = { { 0x06, LVL_1_INST, 8 }, /* 4-way set assoc, 32 byte line size */ { 0x08, LVL_1_INST, 16 }, /* 4-way set assoc, 32 byte line size */ + { 0x09, LVL_1_INST, 32 }, /* 4-way set assoc, 64 byte line size */ { 0x0a, LVL_1_DATA, 8 }, /* 2 way set assoc, 32 byte line size */ { 0x0c, LVL_1_DATA, 16 }, /* 4-way set assoc, 32 byte line size */ + { 0x0d, LVL_1_DATA, 16 }, /* 4-way set assoc, 64 byte line size */ + { 0x21, LVL_2, 256 }, /* 8-way set assoc, 64 byte line size */ { 0x22, LVL_3, 512 }, /* 4-way set assoc, sectored cache, 64 byte line size */ { 0x23, LVL_3, 1024 }, /* 8-way set assoc, sectored cache, 64 byte line size */ { 0x25, LVL_3, 2048 }, /* 8-way set assoc, sectored cache, 64 byte line size */ @@ -85,6 +88,18 @@ static struct _cache_table cache_table[] __cpuinitdata = { 0x85, LVL_2, 2048 }, /* 8-way set assoc, 32 byte line size */ { 0x86, LVL_2, 512 }, /* 4-way set assoc, 64 byte line size */ { 0x87, LVL_2, 1024 }, /* 8-way set assoc, 64 byte line size */ + { 0xd0, LVL_3, 512 }, /* 4-way set assoc, 64 byte line size */ + { 0xd1, LVL_3, 1024 }, /* 4-way set assoc, 64 byte line size */ + { 0xd2, LVL_3, 2048 }, /* 4-way set assoc, 64 byte line size */ + { 0xd6, LVL_3, 1024 }, /* 8-way set assoc, 64 byte line size */ + { 0xd7, LVL_3, 2038 }, /* 8-way set assoc, 64 byte line size */ + { 0xd8, LVL_3, 4096 }, /* 12-way set assoc, 64 byte line size */ + { 0xdc, LVL_3, 2048 }, /* 12-way set assoc, 64 byte line size */ + { 0xdd, LVL_3, 4096 }, /* 12-way set assoc, 64 byte line size */ + { 0xde, LVL_3, 8192 }, /* 12-way set assoc, 64 byte line size */ + { 0xe2, LVL_3, 2048 }, /* 16-way set assoc, 64 byte line size */ + { 0xe3, LVL_3, 4096 }, /* 16-way set assoc, 64 byte line size */ + { 0xe4, LVL_3, 8192 }, /* 16-way set assoc, 64 byte line size */ { 0x00, 0, 0} }; -- cgit v1.2.1 From 10b888d6cec2688e65e9e128b14bf98ecd199da2 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 31 Jan 2009 14:50:07 -0800 Subject: irq, x86: fix lock status with numa_migrate_irq_desc Eric Paris reported: > I have an hp dl785g5 which is unable to successfully run > 2.6.29-0.66.rc3.fc11.x86_64 or 2.6.29-rc2-next-20090126. During bootup > (early in userspace daemons starting) I get the below BUG, which quickly > renders the machine dead. I assume it is because sparse_irq_lock never > gets released when the BUG kills that task. Adjust lock sequence when migrating a descriptor with CONFIG_NUMA_MIGRATE_IRQ_DESC enabled. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/io_apic.c | 5 +++-- kernel/irq/numa_migrate.c | 7 ++++++- 2 files changed, 9 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c index 1c4a1302536c..9b0c480c383b 100644 --- a/arch/x86/kernel/io_apic.c +++ b/arch/x86/kernel/io_apic.c @@ -2528,14 +2528,15 @@ static void irq_complete_move(struct irq_desc **descp) vector = ~get_irq_regs()->orig_ax; me = smp_processor_id(); + + if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain)) { #ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC *descp = desc = move_irq_desc(desc, me); /* get the new one */ cfg = desc->chip_data; #endif - - if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain)) send_cleanup_vector(cfg); + } } #else static inline void irq_complete_move(struct irq_desc **descp) {} diff --git a/kernel/irq/numa_migrate.c b/kernel/irq/numa_migrate.c index ecf765c6a77a..acd88356ac76 100644 --- a/kernel/irq/numa_migrate.c +++ b/kernel/irq/numa_migrate.c @@ -71,7 +71,7 @@ static struct irq_desc *__real_move_irq_desc(struct irq_desc *old_desc, desc = irq_desc_ptrs[irq]; if (desc && old_desc != desc) - goto out_unlock; + goto out_unlock; node = cpu_to_node(cpu); desc = kzalloc_node(sizeof(*desc), GFP_ATOMIC, node); @@ -84,10 +84,15 @@ static struct irq_desc *__real_move_irq_desc(struct irq_desc *old_desc, init_copy_one_irq_desc(irq, old_desc, desc, cpu); irq_desc_ptrs[irq] = desc; + spin_unlock_irqrestore(&sparse_irq_lock, flags); /* free the old one */ free_one_irq_desc(old_desc, desc); + spin_unlock(&old_desc->lock); kfree(old_desc); + spin_lock(&desc->lock); + + return desc; out_unlock: spin_unlock_irqrestore(&sparse_irq_lock, flags); -- cgit v1.2.1 From 40c41c8cf1d04445013a14772afb3903a17344a6 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 31 Jan 2009 08:09:33 -0300 Subject: V4L/DVB (10403): saa7134-alsa: saa7130 doesn't support digital audio According with saa7130 public datasheet, saa7130 doesn't support digital audio. This is also confirmed by experimental tests. So, it doesn't make sense to let saa7134-alsa register for those chipsets. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-alsa.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c index 26194a0ce927..c750d3dd57d2 100644 --- a/drivers/media/video/saa7134/saa7134-alsa.c +++ b/drivers/media/video/saa7134/saa7134-alsa.c @@ -1089,7 +1089,11 @@ static int saa7134_alsa_init(void) list_for_each(list,&saa7134_devlist) { dev = list_entry(list, struct saa7134_dev, devlist); - alsa_device_init(dev); + if (dev->pci->device == PCI_DEVICE_ID_PHILIPS_SAA7130) + printk(KERN_INFO "%s/alsa: %s doesn't support digital audio\n", + dev->name, saa7134_boards[dev->board].name); + else + alsa_device_init(dev); } if (dev == NULL) -- cgit v1.2.1 From 67e70baf043cfdcdaf5972bc94be82632071536b Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Mon, 26 Jan 2009 03:07:59 -0300 Subject: V4L/DVB (10411): s5h1409: Perform s5h1409 soft reset after tuning Just like with the s5h1411, the s5h1409 needs a soft-reset in order for it to know that the tuner has been told to change frequencies. This change changes the behavior from "random tuning times between 500ms to complete tuning lock failures" to "tuning lock consistently within 700ms". Thanks to Robert Krakora for doing initial testing of the patch on the KWorld 330U. Thanks to Andy Walls for doing testing of the patch on the HVR-1600. Thanks to Michael Krufky for doing additional testing. Signed-off-by: Devin Heitmueller Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/s5h1409.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c index cf4d8936bb83..3e08d985d6e5 100644 --- a/drivers/media/dvb/frontends/s5h1409.c +++ b/drivers/media/dvb/frontends/s5h1409.c @@ -545,9 +545,6 @@ static int s5h1409_set_frontend(struct dvb_frontend *fe, s5h1409_enable_modulation(fe, p->u.vsb.modulation); - /* Allow the demod to settle */ - msleep(100); - if (fe->ops.tuner_ops.set_params) { if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); @@ -562,6 +559,10 @@ static int s5h1409_set_frontend(struct dvb_frontend *fe, s5h1409_set_qam_interleave_mode(fe); } + /* Issue a reset to the demod so it knows to resync against the + newly tuned frequency */ + s5h1409_softreset(fe); + return 0; } -- cgit v1.2.1 From 27421e211a39784694b597dbf35848b88363c248 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 1 Feb 2009 11:00:16 -0800 Subject: Manually revert "mlock: downgrade mmap sem while populating mlocked regions" This essentially reverts commit 8edb08caf68184fb170f4f69c7445929e199eaea. It downgraded our mmap semaphore to a read-lock while mlocking pages, in order to allow other threads (and external accesses like "ps" et al) to walk the vma lists and take page faults etc. Which is a nice idea, but the implementation does not work. Because we cannot upgrade the lock back to a write lock without releasing the mmap semaphore, the code had to release the lock entirely and then re-take it as a writelock. However, that meant that the caller possibly lost the vma chain that it was following, since now another thread could come in and mmap/munmap the range. The code tried to work around that by just looking up the vma again and erroring out if that happened, but quite frankly, that was just a buggy hack that doesn't actually protect against anything (the other thread could just have replaced the vma with another one instead of totally unmapping it). The only way to downgrade to a read map _reliably_ is to do it at the end, which is likely the right thing to do: do all the 'vma' operations with the write-lock held, then downgrade to a read after completing them all, and then do the "populate the newly mlocked regions" while holding just the read lock. And then just drop the read-lock and return to user space. The (perhaps somewhat simpler) alternative is to just make all the callers of mlock_vma_pages_range() know that the mmap lock got dropped, and just re-grab the mmap semaphore if it needs to mlock more than one vma region. So we can do this "downgrade mmap sem while populating mlocked regions" thing right, but the way it was done here was absolutely not correct. Thus the revert, in the expectation that we will do it all correctly some day. Cc: Lee Schermerhorn Cc: Rik van Riel Cc: Andrew Morton Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- mm/mlock.c | 47 ++--------------------------------------------- 1 file changed, 2 insertions(+), 45 deletions(-) diff --git a/mm/mlock.c b/mm/mlock.c index 2904a347e476..028ec482fdd4 100644 --- a/mm/mlock.c +++ b/mm/mlock.c @@ -294,14 +294,10 @@ static inline int __mlock_posix_error_return(long retval) * * return number of pages [> 0] to be removed from locked_vm on success * of "special" vmas. - * - * return negative error if vma spanning @start-@range disappears while - * mmap semaphore is dropped. Unlikely? */ long mlock_vma_pages_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { - struct mm_struct *mm = vma->vm_mm; int nr_pages = (end - start) / PAGE_SIZE; BUG_ON(!(vma->vm_flags & VM_LOCKED)); @@ -314,20 +310,8 @@ long mlock_vma_pages_range(struct vm_area_struct *vma, if (!((vma->vm_flags & (VM_DONTEXPAND | VM_RESERVED)) || is_vm_hugetlb_page(vma) || vma == get_gate_vma(current))) { - long error; - downgrade_write(&mm->mmap_sem); - - error = __mlock_vma_pages_range(vma, start, end, 1); - up_read(&mm->mmap_sem); - /* vma can change or disappear */ - down_write(&mm->mmap_sem); - vma = find_vma(mm, start); - /* non-NULL vma must contain @start, but need to check @end */ - if (!vma || end > vma->vm_end) - return -ENOMEM; - - return 0; /* hide other errors from mmap(), et al */ + return __mlock_vma_pages_range(vma, start, end, 1); } /* @@ -438,41 +422,14 @@ success: vma->vm_flags = newflags; if (lock) { - /* - * mmap_sem is currently held for write. Downgrade the write - * lock to a read lock so that other faults, mmap scans, ... - * while we fault in all pages. - */ - downgrade_write(&mm->mmap_sem); - ret = __mlock_vma_pages_range(vma, start, end, 1); - /* - * Need to reacquire mmap sem in write mode, as our callers - * expect this. We have no support for atomically upgrading - * a sem to write, so we need to check for ranges while sem - * is unlocked. - */ - up_read(&mm->mmap_sem); - /* vma can change or disappear */ - down_write(&mm->mmap_sem); - *prev = find_vma(mm, start); - /* non-NULL *prev must contain @start, but need to check @end */ - if (!(*prev) || end > (*prev)->vm_end) - ret = -ENOMEM; - else if (ret > 0) { + if (ret > 0) { mm->locked_vm -= ret; ret = 0; } else ret = __mlock_posix_error_return(ret); /* translate if needed */ } else { - /* - * TODO: for unlocking, pages will already be resident, so - * we don't need to wait for allocations/reclaim/pagein, ... - * However, unlocking a very large region can still take a - * while. Should we downgrade the semaphore for both lock - * AND unlock ? - */ __mlock_vma_pages_range(vma, start, end, 0); } -- cgit v1.2.1 From 309ea626b164f2abba8e639b3eb6f2e5d34708b9 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Tue, 13 Jan 2009 20:09:30 +0000 Subject: powerpc/ps3: Printing fixups for l64 to ll64 convserion drivers/net Signed-off-by: Stephen Rothwell Acked-by: Geoff Levand Acked-by: David S. Miller Signed-off-by: Benjamin Herrenschmidt --- drivers/net/ps3_gelic_wireless.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c index ec2314246682..335da4831ab3 100644 --- a/drivers/net/ps3_gelic_wireless.c +++ b/drivers/net/ps3_gelic_wireless.c @@ -2168,7 +2168,7 @@ static void gelic_wl_connected_event(struct gelic_wl_info *wl, complete(&wl->assoc_done); netif_carrier_on(port_to_netdev(wl_port(wl))); } else - pr_debug("%s: event %#lx under wpa\n", + pr_debug("%s: event %#llx under wpa\n", __func__, event); } -- cgit v1.2.1 From 59b608c2c33feacc8be281ec3ba9ca2a3a5cb9a7 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sun, 1 Feb 2009 17:03:59 +0000 Subject: powerpc: Fix oops on some machines due to incorrect pr_debug() Recently, a patch left DEBUG enabled in the powerpc common PCI code, resulting in an old bug in a pr_debug() statement to show up and cause a NULL dereference on some machines. This fixes the pr_debug() statement and reverts to DEBUG not being force-enabled in that file. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/pci-common.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index da5a3855a0c4..19b12d2cbb4b 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -16,8 +16,6 @@ * 2 of the License, or (at your option) any later version. */ -#define DEBUG - #include #include #include @@ -258,7 +256,8 @@ int pci_read_irq_line(struct pci_dev *pci_dev) } else { pr_debug(" Got one, spec %d cells (0x%08x 0x%08x...) on %s\n", oirq.size, oirq.specifier[0], oirq.specifier[1], - oirq.controller->full_name); + oirq.controller ? oirq.controller->full_name : + ""); virq = irq_create_of_mapping(oirq.controller, oirq.specifier, oirq.size); -- cgit v1.2.1 From 7fbb7cadd062baf299fd8b26a80ea99da0c3fe01 Mon Sep 17 00:00:00 2001 From: Risto Suominen Date: Tue, 13 Jan 2009 20:09:30 +0000 Subject: fbdev/atyfb: Fix DSP config on some PowerMacs & PowerBooks Since the complete re-write in 2.6.10, some PowerMacs (At least PowerMac 5500 and PowerMac G3 Beige rev A) with ATI Mach64 chip have suffered from unstable columns in their framebuffer image. This seems to depend on a value (4) read from PLL_EXT_CNTL register, which leads to incorrect DSP config parameters to be written to the chip. This patch uses a value calculated by aty_init_pll_ct instead, as a starting point. There are questions as to whether this should be extended to other platforms or maybe made dependent on specific chip types, but in the meantime, this has been tested on various powermacs and works for them so let's commit it. Signed-off-by: Risto Suominen Tested-by: Michael Pettersson Cc: Signed-off-by: Benjamin Herrenschmidt --- drivers/video/aty/mach64_ct.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/video/aty/mach64_ct.c b/drivers/video/aty/mach64_ct.c index c50c7cf26fe9..2745b8539485 100644 --- a/drivers/video/aty/mach64_ct.c +++ b/drivers/video/aty/mach64_ct.c @@ -8,6 +8,9 @@ #include #include