From b755706cd726e5d465c28c2cd64c618419034981 Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Wed, 7 Dec 2011 11:47:40 -0800 Subject: ARM: OMAP2+: board-generic: Add missing handle_irq callbacks The following commit: 6b2f55d7851aa358d3a99cff344c560c4967f042, is adding the support for the CONFIG_MULTI_IRQ_HANDLER but did not update all the machine descriptors supported in the DT board-generic.c file. It thus break the DT boot on OMAP3 and OMAP4 boards. Add the proper handle_irq callbacks for OMAP3 and OMAP4 generic machine descriptors. Signed-off-by: Benoit Cousson Acked-by: Marc Zyngier Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-generic.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 63b54163b993..e493877957c9 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -17,6 +17,7 @@ #include #include +#include #include #include @@ -103,6 +104,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)") .map_io = omap242x_map_io, .init_early = omap2420_init_early, .init_irq = omap2_init_irq, + .handle_irq = omap2_intc_handle_irq, .init_machine = omap_generic_init, .timer = &omap2_timer, .dt_compat = omap242x_boards_compat, @@ -140,6 +142,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .map_io = omap3_map_io, .init_early = omap3430_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_init, .timer = &omap3_timer, .dt_compat = omap3_boards_compat, @@ -158,6 +161,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)") .map_io = omap4_map_io, .init_early = omap4430_init_early, .init_irq = gic_init_irq, + .handle_irq = gic_handle_irq, .init_machine = omap4_init, .timer = &omap4_timer, .dt_compat = omap4_boards_compat, -- cgit v1.2.1 From 12183a20a8baf009bf570ab3db45a27fd6b1fd03 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 21 Dec 2011 23:01:20 +0100 Subject: mtd: nand: fix typo in comment Funny one :) "Heck" fits somehow, too, but I am sure it was meant to be "Check". Signed-off-by: Wolfram Sang Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 35b4565050f1..8a393f9e6027 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2588,7 +2588,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, instr->state = MTD_ERASING; while (len) { - /* Heck if we have a bad block, we do not erase bad blocks! */ + /* Check if we have a bad block, we do not erase bad blocks! */ if (nand_block_checkbad(mtd, ((loff_t) page) << chip->page_shift, 0, allowbbt)) { pr_warn("%s: attempt to erase a bad block at page 0x%08x\n", -- cgit v1.2.1 From 9398d1ce09b9009996f7d2468e1d3c785fa6feda Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Wed, 4 Jan 2012 11:18:46 +0800 Subject: mtd: gpmi-nand bugfix: reset the BCH module when it is not MX23 In MX28, if we do not reset the BCH module. The BCH module may becomes unstable when the board reboots for several thousands times. This bug has been catched in customer's production. The patch adds some comments (some from Wolfram Sang), and fixes it now. Also change gpmi_reset_block() to static. Signed-off-by: Huang Shijie Acked-by: Marek Vasut Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse Cc: stable@kernel.org [3.1+] --- drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index 2a56fc6f399a..c56f8e021b90 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -69,17 +69,19 @@ static int clear_poll_bit(void __iomem *addr, u32 mask) * [1] enable the module. * [2] reset the module. * - * In most of the cases, it's ok. But there is a hardware bug in the BCH block. + * In most of the cases, it's ok. + * But in MX23, there is a hardware bug in the BCH block (see erratum #2847). * If you try to soft reset the BCH block, it becomes unusable until * the next hard reset. This case occurs in the NAND boot mode. When the board * boots by NAND, the ROM of the chip will initialize the BCH blocks itself. * So If the driver tries to reset the BCH again, the BCH will not work anymore. - * You will see a DMA timeout in this case. + * You will see a DMA timeout in this case. The bug has been fixed + * in the following chips, such as MX28. * * To avoid this bug, just add a new parameter `just_enable` for * the mxs_reset_block(), and rewrite it here. */ -int gpmi_reset_block(void __iomem *reset_addr, bool just_enable) +static int gpmi_reset_block(void __iomem *reset_addr, bool just_enable) { int ret; int timeout = 0x400; @@ -206,7 +208,15 @@ int bch_set_geometry(struct gpmi_nand_data *this) if (ret) goto err_out; - ret = gpmi_reset_block(r->bch_regs, true); + /* + * Due to erratum #2847 of the MX23, the BCH cannot be soft reset on this + * chip, otherwise it will lock up. So we skip resetting BCH on the MX23. + * On the other hand, the MX28 needs the reset, because one case has been + * seen where the BCH produced ECC errors constantly after 10000 + * consecutive reboots. The latter case has not been seen on the MX23 yet, + * still we don't know if it could happen there as well. + */ + ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MX23(this)); if (ret) goto err_out; -- cgit v1.2.1 From bce41d601e58af12cee1398fe836e6b9a8fb5396 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Tue, 10 Jan 2012 15:32:29 +0200 Subject: jffs2: do not initialize variable unnecessarily Remove unnecessary initializer for a local variable. Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- fs/jffs2/erase.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/jffs2/erase.c b/fs/jffs2/erase.c index a01cdad6aad1..eafb8d37a6fb 100644 --- a/fs/jffs2/erase.c +++ b/fs/jffs2/erase.c @@ -335,7 +335,7 @@ static int jffs2_block_check_erase(struct jffs2_sb_info *c, struct jffs2_erasebl void *ebuf; uint32_t ofs; size_t retlen; - int ret = -EIO; + int ret; unsigned long *wordebuf; ret = mtd_point(c->mtd, jeb->offset, c->sector_size, &retlen, -- cgit v1.2.1 From bfe75c7e67e5f32bf446a48e0502d06d25b51752 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 13 Jan 2012 16:27:38 +0900 Subject: sh: Defer to asm-generic/device.h. Now that the hwblk use cases have been ripped out, we can revert to asm-generic/device.h for the device/platform device arch data structures. Signed-off-by: Paul Mundt --- arch/sh/include/asm/device.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/sh/include/asm/device.h b/arch/sh/include/asm/device.h index a1c9c0daec10..071bcb4d4bfd 100644 --- a/arch/sh/include/asm/device.h +++ b/arch/sh/include/asm/device.h @@ -3,9 +3,10 @@ * * This file is released under the GPLv2 */ +#ifndef __ASM_SH_DEVICE_H +#define __ASM_SH_DEVICE_H -struct dev_archdata { -}; +#include struct platform_device; /* allocate contiguous memory chunk and fill in struct resource */ @@ -14,5 +15,4 @@ int platform_resource_setup_memory(struct platform_device *pdev, void plat_early_device_setup(void); -struct pdev_archdata { -}; +#endif /* __ASM_SH_DEVICE_H */ -- cgit v1.2.1 From 6d7120a713300283a8b73e7d86cd1bab8b9d1971 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 13 Jan 2012 16:42:50 +0900 Subject: video: pvr2fb: Fix up spurious section mismatch warnings. pvr2fb special cases its init/exit routines which causes spurious section mismatches. Set the board_driver array __refdata to silence them. Signed-off-by: Paul Mundt --- drivers/video/pvr2fb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c index f9975100d56d..3a3fdc62c75b 100644 --- a/drivers/video/pvr2fb.c +++ b/drivers/video/pvr2fb.c @@ -1061,7 +1061,7 @@ static struct pvr2_board { int (*init)(void); void (*exit)(void); char name[16]; -} board_driver[] = { +} board_driver[] __refdata = { #ifdef CONFIG_SH_DREAMCAST { pvr2fb_dc_init, pvr2fb_dc_exit, "Sega DC PVR2" }, #endif -- cgit v1.2.1 From 78da107a7ed14fbc6ef77ff4c41d92b11edc9036 Mon Sep 17 00:00:00 2001 From: "Shimoda, Yoshihiro" Date: Tue, 17 Jan 2012 17:49:38 +0900 Subject: sh: fix the sh_mmcif_plat_data in board-sh7757lcr The board has an eMMC chip, so we cannot remove the chip. In this case, we have to set the MMC_CAP_NONREMOVABLE to the caps parameter. Reported-by: Guennadi Liakhovetski Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- arch/sh/boards/board-sh7757lcr.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c index 0838154dd216..33dc5b6e8e17 100644 --- a/arch/sh/boards/board-sh7757lcr.c +++ b/arch/sh/boards/board-sh7757lcr.c @@ -222,7 +222,8 @@ static struct sh_mmcif_dma sh7757lcr_mmcif_dma = { static struct sh_mmcif_plat_data sh_mmcif_plat = { .dma = &sh7757lcr_mmcif_dma, .sup_pclk = 0x0f, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | + MMC_CAP_NONREMOVABLE, .ocr = MMC_VDD_32_33 | MMC_VDD_33_34, }; -- cgit v1.2.1 From 0df1a838d678fc6ab49f983a19e905f6a42297a0 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 17 Jan 2012 20:05:40 +0900 Subject: ARM: mach-shmobile: sh73a0 PINT IRQ base fix Bump up the sh73a0 PINT IRQ base from 768 to 800 to avoid collision with INTCS vectors for IRQ16->IRQ32 at 0x3xxx. Without this fix the sh73a0 IRQ pin handling code collides with the PINT code which results in hangs on Kota2 during boot. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/include/mach/sh73a0.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h index 881d515a9686..cad57578ceed 100644 --- a/arch/arm/mach-shmobile/include/mach/sh73a0.h +++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h @@ -515,8 +515,8 @@ enum { SHDMA_SLAVE_MMCIF_RX, }; -/* PINT interrupts are located at Linux IRQ 768 and up */ -#define SH73A0_PINT0_IRQ(irq) ((irq) + 768) -#define SH73A0_PINT1_IRQ(irq) ((irq) + 800) +/* PINT interrupts are located at Linux IRQ 800 and up */ +#define SH73A0_PINT0_IRQ(irq) ((irq) + 800) +#define SH73A0_PINT1_IRQ(irq) ((irq) + 832) #endif /* __ASM_SH73A0_H__ */ -- cgit v1.2.1 From e2c31b3fdd48274e9deb450e21279e54dfa02ccd Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 17 Jan 2012 20:10:49 +0900 Subject: ARM: mach-shmobile: sh73a0 IRQ sparse alloc fix Fix the sh73a0 external IRQ pin code to properly support CONFIG_SPARSE_IRQ=y by allocating IRQ descriptors for the cascaded IRQs associated with external IRQ pins. Without this fix it is impossible to request IRQ0->IRQ31 on the Kota2 board when sparse IRQs are enabled. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/intc-sh73a0.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index 1eda6b0b69e3..9857595eaa79 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -445,6 +446,7 @@ void __init sh73a0_init_irq(void) setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]); n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k))); + WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n); irq_set_chip_and_handler_name(n, &intca_gic_irq_chip, handle_level_irq, "level"); set_irq_flags(n, IRQF_VALID); /* yuck */ -- cgit v1.2.1 From 2fde109c2d79e9791250a5d212c13055e9216a55 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 17 Jan 2012 20:14:07 +0900 Subject: ARM: mach-shmobile: IRQ driven GPIO key support for Kota2 Now when GPIO IRQs are supported on sh73a0 modify the Kota2 board code to switch from the polled "gpio-keys-polled" driver to the IRQ driven "gpio-keys" driver. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-kota2.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index 857ceeec1bb0..c8e7ca23fc06 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -143,11 +143,10 @@ static struct gpio_keys_button gpio_buttons[] = { static struct gpio_keys_platform_data gpio_key_info = { .buttons = gpio_buttons, .nbuttons = ARRAY_SIZE(gpio_buttons), - .poll_interval = 250, /* polled for now */ }; static struct platform_device gpio_keys_device = { - .name = "gpio-keys-polled", /* polled for now */ + .name = "gpio-keys", .id = -1, .dev = { .platform_data = &gpio_key_info, -- cgit v1.2.1 From d5bb386d70c8e8e79c7f652a794610e01d79f33e Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 30 Aug 2011 18:26:44 +0200 Subject: ARM: mach-shmobile: simplify MMCIF DMA configuration Use the simplified method to specify MMCIF DMA slave configuration. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ag5evm.c | 11 ++--------- arch/arm/mach-shmobile/board-ap4evb.c | 12 ++---------- arch/arm/mach-shmobile/board-mackerel.c | 12 ++---------- 3 files changed, 6 insertions(+), 29 deletions(-) diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index eff8a96c75ee..729eaee5a151 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -159,19 +159,12 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; static struct sh_mmcif_plat_data sh_mmcif_platdata = { .sup_pclk = 0, .ocr = MMC_VDD_165_195, .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device mmc_device = { diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index aab0a349f759..eeb4d9664584 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -295,15 +295,6 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; - static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, @@ -311,7 +302,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { MMC_CAP_8_BIT_DATA | MMC_CAP_NEEDS_POLL, .get_cd = slot_cn7_get_cd, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device sh_mmcif_device = { diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 9b42fbd10f8e..1a955e2a334f 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -1184,15 +1184,6 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; - static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, @@ -1200,7 +1191,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { MMC_CAP_8_BIT_DATA | MMC_CAP_NEEDS_POLL, .get_cd = slot_cn7_get_cd, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device sh_mmcif_device = { -- cgit v1.2.1 From 48cfe37cc03f616e6c139796962e7ec677cde8a9 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 21 Dec 2011 14:20:23 -0500 Subject: target: don't allocate bio headroom in iblock We never embedd the bio into a structure, so there is no need to allocate 64 bytes of headroom per bio. Signed-off-by: Christoph Hellwig Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_iblock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c index cc8e6b58ef20..628e877381d8 100644 --- a/drivers/target/target_core_iblock.c +++ b/drivers/target/target_core_iblock.c @@ -129,7 +129,7 @@ static struct se_device *iblock_create_virtdevice( /* * These settings need to be made tunable.. */ - ib_dev->ibd_bio_set = bioset_create(32, 64); + ib_dev->ibd_bio_set = bioset_create(32, 0); if (!ib_dev->ibd_bio_set) { pr_err("IBLOCK: Unable to create bioset()\n"); return ERR_PTR(-ENOMEM); -- cgit v1.2.1 From 9e08e34e3735ae057eb3834da3570995811b7eb9 Mon Sep 17 00:00:00 2001 From: Marco Sanvido Date: Tue, 3 Jan 2012 17:12:57 -0800 Subject: target: Use correct preempted registration sense code The comments quote the right parts of the spec: * d) Establish a unit attention condition for the * initiator port associated with every I_T nexus * that lost its registration other than the I_T * nexus on which the PERSISTENT RESERVE OUT command * was received, with the additional sense code set * to REGISTRATIONS PREEMPTED. and * e) Establish a unit attention condition for the initiator * port associated with every I_T nexus that lost its * persistent reservation and/or registration, with the * additional sense code set to REGISTRATIONS PREEMPTED; but the actual code accidentally uses ASCQ_2AH_RESERVATIONS_PREEMPTED instead of ASCQ_2AH_REGISTRATIONS_PREEMPTED. Fix this. Signed-off-by: Marco Sanvido Signed-off-by: Roland Dreier Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_pr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index 429ad7291664..d14860ff2508 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -3120,7 +3120,7 @@ static int core_scsi3_pro_preempt( if (!calling_it_nexus) core_scsi3_ua_allocate(pr_reg_nacl, pr_res_mapped_lun, 0x2A, - ASCQ_2AH_RESERVATIONS_PREEMPTED); + ASCQ_2AH_REGISTRATIONS_PREEMPTED); } spin_unlock(&pr_tmpl->registration_lock); /* @@ -3233,7 +3233,7 @@ static int core_scsi3_pro_preempt( * additional sense code set to REGISTRATIONS PREEMPTED; */ core_scsi3_ua_allocate(pr_reg_nacl, pr_res_mapped_lun, 0x2A, - ASCQ_2AH_RESERVATIONS_PREEMPTED); + ASCQ_2AH_REGISTRATIONS_PREEMPTED); } spin_unlock(&pr_tmpl->registration_lock); /* -- cgit v1.2.1 From 6816966a8418b980481b4dced7eddd1796b145e8 Mon Sep 17 00:00:00 2001 From: Marco Sanvido Date: Tue, 3 Jan 2012 17:12:58 -0800 Subject: target: Allow PERSISTENT RESERVE IN for non-reservation holder Initiators that aren't the active reservation holder should be able to do a PERSISTENT RESERVE IN command in all cases, so add it to the list of allowed CDBs in core_scsi3_pr_seq_non_holder(). Signed-off-by: Marco Sanvido Signed-off-by: Roland Dreier Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_pr.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index d14860ff2508..68c71cd7a88e 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -478,6 +478,7 @@ static int core_scsi3_pr_seq_non_holder( case READ_MEDIA_SERIAL_NUMBER: case REPORT_LUNS: case REQUEST_SENSE: + case PERSISTENT_RESERVE_IN: ret = 0; /*/ Allowed CDBs */ break; default: -- cgit v1.2.1 From 9db9da332250dbe662995703a4dcdd692112f0c3 Mon Sep 17 00:00:00 2001 From: "roland@purestorage.com" Date: Wed, 4 Jan 2012 15:59:58 -0800 Subject: target: Don't zero pages used for data buffers Doing alloc_page(GFP_KERNEL | __GFP_ZERO) to get pages used for data buffers wastes a lot of CPU clearing pages that will be quickly be overwritten by the actual data. However, for emulated control commands such as INQUIRY and so on, the code does assume that the buffer is zeroed. To avoid this CPU overhead, skip the __GFP_ZERO for commands that are actually moving data, ie cmds that have SCF_SCSI_DATA_SG_IO_CDB set. Signed-off-by: Roland Dreier Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index d3ddd1361949..289bc0f125f9 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -3516,6 +3516,7 @@ transport_generic_get_mem(struct se_cmd *cmd) u32 length = cmd->data_length; unsigned int nents; struct page *page; + gfp_t zero_flag; int i = 0; nents = DIV_ROUND_UP(length, PAGE_SIZE); @@ -3526,9 +3527,11 @@ transport_generic_get_mem(struct se_cmd *cmd) cmd->t_data_nents = nents; sg_init_table(cmd->t_data_sg, nents); + zero_flag = cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB ? 0 : __GFP_ZERO; + while (length) { u32 page_len = min_t(u32, length, PAGE_SIZE); - page = alloc_page(GFP_KERNEL | __GFP_ZERO); + page = alloc_page(GFP_KERNEL | zero_flag); if (!page) goto out; -- cgit v1.2.1 From 9fbc8909876a2160044e71d376848973b9bfdc3f Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 9 Jan 2012 17:54:00 -0800 Subject: target: Correct sense key for INVALID FIELD IN {PARAMETER LIST,CDB} According to SPC-4, the sense key for commands that are failed with INVALID FIELD IN PARAMETER LIST and INVALID FIELD IN CDB should be ILLEGAL REQUEST (5h) rather than ABORTED COMMAND (Bh). Without this patch, a tcm_loop LUN incorrectly gives: # sg_raw -r 1 -v /dev/sda 3 1 0 0 ff 0 Sense Information: Fixed format, current; Sense key: Aborted Command Additional sense: Invalid field in cdb Raw sense data (in hex): 70 00 0b 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 While a real SCSI disk gives: Sense Information: Fixed format, current; Sense key: Illegal Request Additional sense: Invalid field in cdb Raw sense data (in hex): 70 00 05 00 00 00 00 18 00 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 with the main point being that the real disk gives a sense key of ILLEGAL REQUEST (5h). Signed-off-by: Roland Dreier Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 289bc0f125f9..2869fb7d2c05 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -4451,8 +4451,8 @@ int transport_send_check_condition_and_sense( /* CURRENT ERROR */ buffer[offset] = 0x70; buffer[offset+SPC_ADD_SENSE_LEN_OFFSET] = 10; - /* ABORTED COMMAND */ - buffer[offset+SPC_SENSE_KEY_OFFSET] = ABORTED_COMMAND; + /* ILLEGAL REQUEST */ + buffer[offset+SPC_SENSE_KEY_OFFSET] = ILLEGAL_REQUEST; /* INVALID FIELD IN CDB */ buffer[offset+SPC_ASC_KEY_OFFSET] = 0x24; break; @@ -4460,8 +4460,8 @@ int transport_send_check_condition_and_sense( /* CURRENT ERROR */ buffer[offset] = 0x70; buffer[offset+SPC_ADD_SENSE_LEN_OFFSET] = 10; - /* ABORTED COMMAND */ - buffer[offset+SPC_SENSE_KEY_OFFSET] = ABORTED_COMMAND; + /* ILLEGAL REQUEST */ + buffer[offset+SPC_SENSE_KEY_OFFSET] = ILLEGAL_REQUEST; /* INVALID FIELD IN PARAMETER LIST */ buffer[offset+SPC_ASC_KEY_OFFSET] = 0x26; break; -- cgit v1.2.1 From 91ec1d3535b2acf12c599045cc19ad9be3c6a47b Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 13 Jan 2012 12:01:34 -0800 Subject: target: Add workaround for zero-length control CDB handling This patch adds a work-around for handling zero allocation length control CDBs (type SCF_SCSI_CONTROL_SG_IO_CDB) that was causing an OOPs with the following raw calls: # sg_raw -v /dev/sdd 3 0 0 0 0 0 # sg_raw -v /dev/sdd 0x1a 0 1 0 0 0 This patch will follow existing zero-length handling for data I/O and silently return with GOOD status. This addresses the zero length issue, but the proper long-term resolution for handling arbitary allocation lengths will be to refactor out data-phase handling in individual CDB emulation logic within target_core_cdb.c Reported-by: Roland Dreier Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 2869fb7d2c05..50d6911d4120 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -3759,6 +3759,11 @@ transport_allocate_control_task(struct se_cmd *cmd) struct se_task *task; unsigned long flags; + /* Workaround for handling zero-length control CDBs */ + if ((cmd->se_cmd_flags & SCF_SCSI_CONTROL_SG_IO_CDB) && + !cmd->data_length) + return 0; + task = transport_generic_get_task(cmd, cmd->data_direction); if (!task) return -ENOMEM; @@ -3830,6 +3835,14 @@ int transport_generic_new_cmd(struct se_cmd *cmd) else if (!task_cdbs && (cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB)) { cmd->t_state = TRANSPORT_COMPLETE; atomic_set(&cmd->t_transport_active, 1); + + if (cmd->t_task_cdb[0] == REQUEST_SENSE) { + u8 ua_asc = 0, ua_ascq = 0; + + core_scsi3_ua_clear_for_request_sense(cmd, + &ua_asc, &ua_ascq); + } + INIT_WORK(&cmd->work, target_complete_ok_work); queue_work(target_completion_wq, &cmd->work); return 0; -- cgit v1.2.1 From e59a41b69a8e116d5ac8c95c4222f5a971f66bbd Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 10 Jan 2012 14:16:57 +0100 Subject: target: avoid multiple outputs in scsi_dump_inquiry() The multiple calls to pr_debug() each with one letter results in a new line. This patch merges the multiple requests into one call per line so we don't have the multiple line cuts. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 50d6911d4120..e186f7db3860 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1255,32 +1255,34 @@ static void core_setup_task_attr_emulation(struct se_device *dev) static void scsi_dump_inquiry(struct se_device *dev) { struct t10_wwn *wwn = &dev->se_sub_dev->t10_wwn; + char buf[17]; int i, device_type; /* * Print Linux/SCSI style INQUIRY formatting to the kernel ring buffer */ - pr_debug(" Vendor: "); for (i = 0; i < 8; i++) if (wwn->vendor[i] >= 0x20) - pr_debug("%c", wwn->vendor[i]); + buf[i] = wwn->vendor[i]; else - pr_debug(" "); + buf[i] = ' '; + buf[i] = '\0'; + pr_debug(" Vendor: %s\n", buf); - pr_debug(" Model: "); for (i = 0; i < 16; i++) if (wwn->model[i] >= 0x20) - pr_debug("%c", wwn->model[i]); + buf[i] = wwn->model[i]; else - pr_debug(" "); + buf[i] = ' '; + buf[i] = '\0'; + pr_debug(" Model: %s\n", buf); - pr_debug(" Revision: "); for (i = 0; i < 4; i++) if (wwn->revision[i] >= 0x20) - pr_debug("%c", wwn->revision[i]); + buf[i] = wwn->revision[i]; else - pr_debug(" "); - - pr_debug("\n"); + buf[i] = ' '; + buf[i] = '\0'; + pr_debug(" Revision: %s\n", buf); device_type = dev->transport->get_device_type(dev); pr_debug(" Type: %s ", scsi_device_type(device_type)); -- cgit v1.2.1 From 1dd0a0674530da61cdbfadd88c96949b483a7c19 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 10 Jan 2012 14:16:58 +0100 Subject: target: use save/restore lock primitive in core_dec_lacl_count() It may happen that uasp will free the request in irq conntext, the callchain: uasp_cmd_release() -> transport_generic_free_cmd() -> core_dec_lacl_count() where the last function enables the IRQ. Those irqs are re-disabled later (due to the spin.*irq_restore) but in between we could get hurt. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_device.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index 0c5992f0d946..00159a4e781f 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -320,11 +320,12 @@ int core_free_device_list_for_node( void core_dec_lacl_count(struct se_node_acl *se_nacl, struct se_cmd *se_cmd) { struct se_dev_entry *deve; + unsigned long flags; - spin_lock_irq(&se_nacl->device_list_lock); + spin_lock_irqsave(&se_nacl->device_list_lock, flags); deve = &se_nacl->device_list[se_cmd->orig_fe_lun]; deve->deve_cmds--; - spin_unlock_irq(&se_nacl->device_list_lock); + spin_unlock_irqrestore(&se_nacl->device_list_lock, flags); } void core_update_device_list_access( -- cgit v1.2.1 From 8d9efe539cf78f6a90947d47100e4a86d907750f Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Wed, 11 Jan 2012 21:43:38 +0100 Subject: target: fix return code of core_tpg_.*_lun - core_tpg_pre_addlun() returns always ERR_PTR() or the pointer, never NULL. The additional check for NULL in core_dev_add_lun() is not required. - core_tpg_pre_dellun() returns always ERR_PTR() or the pointer, never NULL. The check for NULL in core_dev_del_lun() is wrong. The third argument (int *) is never used, remove it. - core_dev_add_lun() returns always NULL or the pointer, never ERR_PTR. The check for IS_ERR() is not required. (nab: Convert core_dev_add_lun() use err.h macros for failure handling to be consistent with the rest of target_core_fabric_configfs.c callers) Signed-off-by: Sebastian Andrzej Siewior Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_device.c | 19 ++++++++++--------- drivers/target/target_core_fabric_configfs.c | 4 ++-- drivers/target/target_core_internal.h | 2 +- drivers/target/target_core_tpg.c | 3 +-- 4 files changed, 14 insertions(+), 14 deletions(-) diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index 00159a4e781f..de5f4fea7f62 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -1295,24 +1295,26 @@ struct se_lun *core_dev_add_lun( { struct se_lun *lun_p; u32 lun_access = 0; + int rc; if (atomic_read(&dev->dev_access_obj.obj_access_count) != 0) { pr_err("Unable to export struct se_device while dev_access_obj: %d\n", atomic_read(&dev->dev_access_obj.obj_access_count)); - return NULL; + return ERR_PTR(-EACCES); } lun_p = core_tpg_pre_addlun(tpg, lun); - if ((IS_ERR(lun_p)) || !lun_p) - return NULL; + if (IS_ERR(lun_p)) + return lun_p; if (dev->dev_flags & DF_READ_ONLY) lun_access = TRANSPORT_LUNFLAGS_READ_ONLY; else lun_access = TRANSPORT_LUNFLAGS_READ_WRITE; - if (core_tpg_post_addlun(tpg, lun_p, lun_access, dev) < 0) - return NULL; + rc = core_tpg_post_addlun(tpg, lun_p, lun_access, dev); + if (rc < 0) + return ERR_PTR(rc); pr_debug("%s_TPG[%u]_LUN[%u] - Activated %s Logical Unit from" " CORE HBA: %u\n", tpg->se_tpg_tfo->get_fabric_name(), @@ -1349,11 +1351,10 @@ int core_dev_del_lun( u32 unpacked_lun) { struct se_lun *lun; - int ret = 0; - lun = core_tpg_pre_dellun(tpg, unpacked_lun, &ret); - if (!lun) - return ret; + lun = core_tpg_pre_dellun(tpg, unpacked_lun); + if (IS_ERR(lun)) + return PTR_ERR(lun); core_tpg_post_dellun(tpg, lun); diff --git a/drivers/target/target_core_fabric_configfs.c b/drivers/target/target_core_fabric_configfs.c index 4f77cce22646..9a2ce11e1a6e 100644 --- a/drivers/target/target_core_fabric_configfs.c +++ b/drivers/target/target_core_fabric_configfs.c @@ -766,9 +766,9 @@ static int target_fabric_port_link( lun_p = core_dev_add_lun(se_tpg, dev->se_hba, dev, lun->unpacked_lun); - if (IS_ERR(lun_p) || !lun_p) { + if (IS_ERR(lun_p)) { pr_err("core_dev_add_lun() failed\n"); - ret = -EINVAL; + ret = PTR_ERR(lun_p); goto out; } diff --git a/drivers/target/target_core_internal.h b/drivers/target/target_core_internal.h index 26f135e94f6e..45001364788a 100644 --- a/drivers/target/target_core_internal.h +++ b/drivers/target/target_core_internal.h @@ -90,7 +90,7 @@ void core_tpg_wait_for_nacl_pr_ref(struct se_node_acl *); struct se_lun *core_tpg_pre_addlun(struct se_portal_group *, u32); int core_tpg_post_addlun(struct se_portal_group *, struct se_lun *, u32, void *); -struct se_lun *core_tpg_pre_dellun(struct se_portal_group *, u32, int *); +struct se_lun *core_tpg_pre_dellun(struct se_portal_group *, u32 unpacked_lun); int core_tpg_post_dellun(struct se_portal_group *, struct se_lun *); /* target_core_transport.c */ diff --git a/drivers/target/target_core_tpg.c b/drivers/target/target_core_tpg.c index b7668029bb31..06336ecd872d 100644 --- a/drivers/target/target_core_tpg.c +++ b/drivers/target/target_core_tpg.c @@ -807,8 +807,7 @@ static void core_tpg_shutdown_lun( struct se_lun *core_tpg_pre_dellun( struct se_portal_group *tpg, - u32 unpacked_lun, - int *ret) + u32 unpacked_lun) { struct se_lun *lun; -- cgit v1.2.1 From c1ce4bd56f2846de55043374598fd929ad3b711b Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Mon, 16 Jan 2012 16:04:15 -0800 Subject: iscsi-target: Fix reject release handling in iscsit_free_cmd() This patch addresses a bug where iscsit_free_cmd() was incorrectly calling iscsit_release_cmd() for ISCSI_OP_REJECT because iscsi_add_reject*() will overwrite the original iscsi_cmd->iscsi_opcode assignment. This bug was introduced with the following commit: commit 0be67f2ed8f577d2c72d917928394c5885fa9134 Author: Nicholas Bellinger Date: Sun Oct 9 01:48:14 2011 -0700 iscsi-target: Remove SCF_SE_LUN_CMD flag abuses and was manifesting itself as list corruption with the following: [ 131.191092] ------------[ cut here ]------------ [ 131.191092] WARNING: at lib/list_debug.c:53 __list_del_entry+0x8d/0x98() [ 131.191092] Hardware name: VMware Virtual Platform [ 131.191092] list_del corruption. prev->next should be ffff880022d3c100, but was 6b6b6b6b6b6b6b6b [ 131.191092] Modules linked in: tcm_vhost ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx qla2xxx tcm_loop tcm_fc libfc scsi_transport_fc crc32c iscsi_target_mod target_core_stgt scsi_tgt target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi sr_mod cdrom sd_mod e1000 ata_piix libata mptspi mptscsih mptbase [last unloaded: scsi_wait_scan] [ 131.191092] Pid: 2250, comm: iscsi_ttx Tainted: G W 3.2.0-rc4+ #42 [ 131.191092] Call Trace: [ 131.191092] [] warn_slowpath_common+0x80/0x98 [ 131.191092] [] warn_slowpath_fmt+0x41/0x43 [ 131.191092] [] __list_del_entry+0x8d/0x98 [ 131.191092] [] transport_lun_remove_cmd+0x9b/0xb7 [target_core_mod] [ 131.191092] [] transport_generic_free_cmd+0x5d/0x71 [target_core_mod] [ 131.191092] [] iscsit_free_cmd+0x1e/0x27 [iscsi_target_mod] [ 131.191092] [] iscsit_close_connection+0x14d/0x5b2 [iscsi_target_mod] [ 131.191092] [] iscsit_take_action_for_connection_exit+0xdb/0xe0 [iscsi_target_mod] [ 131.191092] [] iscsi_target_tx_thread+0x15cb/0x1608 [iscsi_target_mod] [ 131.191092] [] ? check_preempt_wakeup+0x121/0x185 [ 131.191092] [] ? __dequeue_entity+0x2e/0x33 [ 131.191092] [] ? iscsit_send_text_rsp+0x25f/0x25f [iscsi_target_mod] [ 131.191092] [] ? iscsit_send_text_rsp+0x25f/0x25f [iscsi_target_mod] [ 131.191092] [] ? schedule+0x55/0x57 [ 131.191092] [] kthread+0x7d/0x85 [ 131.191092] [] kernel_thread_helper+0x4/0x10 [ 131.191092] [] ? kthread_worker_fn+0x16d/0x16d [ 131.191092] [] ? gs_change+0x13/0x13 Reported-by: Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_util.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/target/iscsi/iscsi_target_util.c b/drivers/target/iscsi/iscsi_target_util.c index a05ca1c4f01c..11287e1ece13 100644 --- a/drivers/target/iscsi/iscsi_target_util.c +++ b/drivers/target/iscsi/iscsi_target_util.c @@ -849,6 +849,17 @@ void iscsit_free_cmd(struct iscsi_cmd *cmd) case ISCSI_OP_SCSI_TMFUNC: transport_generic_free_cmd(&cmd->se_cmd, 1); break; + case ISCSI_OP_REJECT: + /* + * Handle special case for REJECT when iscsi_add_reject*() has + * overwritten the original iscsi_opcode assignment, and the + * associated cmd->se_cmd needs to be released. + */ + if (cmd->se_cmd.se_tfo != NULL) { + transport_generic_free_cmd(&cmd->se_cmd, 1); + break; + } + /* Fall-through */ default: iscsit_release_cmd(cmd); break; -- cgit v1.2.1 From cd931ee62fd0258fc85c76a7c5499fe85e0f3436 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Mon, 16 Jan 2012 17:11:54 -0800 Subject: iscsi-target: Fix double list_add with iscsit_alloc_buffs reject This patch fixes a bug where the iscsit_add_reject_from_cmd() call from a failure to iscsit_alloc_buffs() was incorrectly passing add_to_conn=1 and causing a double list_add after iscsi_cmd->i_list had already been added in iscsit_handle_scsi_cmd(). Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index ac44af165b27..6e070e0a8393 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -1061,7 +1061,7 @@ attach_cmd: if (ret < 0) return iscsit_add_reject_from_cmd( ISCSI_REASON_BOOKMARK_NO_RESOURCES, - 1, 1, buf, cmd); + 1, 0, buf, cmd); /* * Check the CmdSN against ExpCmdSN/MaxCmdSN here if * the Immediate Bit is not set, and no Immediate -- cgit v1.2.1 From f8d48ae52eeec906d7fb42485eb26a5d305bab0a Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 15 Jan 2012 14:30:24 +0300 Subject: iscsi-target: make one-bit bitfields unsigned Signed bitfields are a problem because instead of being 1 or 0 like you'd expect they are 0 and -1. It doesn't cause a problem in this case but sparse complains: drivers/target/iscsi/iscsi_target_core.h:564:56: error: dubious one-bit signed bitfield Signed-off-by: Dan Carpenter Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_core.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target_core.h b/drivers/target/iscsi/iscsi_target_core.h index f1a02dad05a0..ebf81fdbb5c5 100644 --- a/drivers/target/iscsi/iscsi_target_core.h +++ b/drivers/target/iscsi/iscsi_target_core.h @@ -561,8 +561,8 @@ struct iscsi_conn { struct hash_desc conn_tx_hash; /* Used for scheduling TX and RX connection kthreads */ cpumask_var_t conn_cpumask; - int conn_rx_reset_cpumask:1; - int conn_tx_reset_cpumask:1; + unsigned int conn_rx_reset_cpumask:1; + unsigned int conn_tx_reset_cpumask:1; /* list_head of struct iscsi_cmd for this connection */ struct list_head conn_cmd_list; struct list_head immed_queue_list; -- cgit v1.2.1 From e8904dc5008ef92f0f62391d6557f03f921eeb32 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 15 Jan 2012 19:33:30 +0100 Subject: iscsi-target: Fix up a few assignments A statement such as struct iscsi_node_attrib *na = na = iscsit_tpg_get_node_attrib(sess); has undefined behaviour since there are two assignments to 'na', strictly speaking (the order in which side-effects from the assignments take place is undefined since there's no intervening sequence point), and it looks unintentional in any case. Signed-off-by: Jesper Juhl Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_erl1.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target_erl1.c b/drivers/target/iscsi/iscsi_target_erl1.c index 255c0d67e898..27901e37c125 100644 --- a/drivers/target/iscsi/iscsi_target_erl1.c +++ b/drivers/target/iscsi/iscsi_target_erl1.c @@ -1238,7 +1238,7 @@ void iscsit_mod_dataout_timer(struct iscsi_cmd *cmd) { struct iscsi_conn *conn = cmd->conn; struct iscsi_session *sess = conn->sess; - struct iscsi_node_attrib *na = na = iscsit_tpg_get_node_attrib(sess); + struct iscsi_node_attrib *na = iscsit_tpg_get_node_attrib(sess); spin_lock_bh(&cmd->dataout_timeout_lock); if (!(cmd->dataout_timer_flags & ISCSI_TF_RUNNING)) { @@ -1261,7 +1261,7 @@ void iscsit_start_dataout_timer( struct iscsi_conn *conn) { struct iscsi_session *sess = conn->sess; - struct iscsi_node_attrib *na = na = iscsit_tpg_get_node_attrib(sess); + struct iscsi_node_attrib *na = iscsit_tpg_get_node_attrib(sess); if (cmd->dataout_timer_flags & ISCSI_TF_RUNNING) return; -- cgit v1.2.1 From 4949314c7283ea4f9ade182ca599583b89f7edd6 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Mon, 16 Jan 2012 16:57:08 -0800 Subject: target: Allow control CDBs with data > 1 page We need to handle >1 page control cdbs, so extend the code to do a vmap if bigger than 1 page. It seems like kmap() is still preferable if just a page, fewer TLB shootdowns(?), so keep using that when possible. Rename function pair for their new scope. Signed-off-by: Andy Grover Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_alua.c | 8 +++--- drivers/target/target_core_cdb.c | 28 ++++++++++----------- drivers/target/target_core_device.c | 4 +-- drivers/target/target_core_pr.c | 38 ++++++++++++++-------------- drivers/target/target_core_pscsi.c | 4 +-- drivers/target/target_core_transport.c | 45 +++++++++++++++++++++++++--------- include/target/target_core_backend.h | 4 +-- include/target/target_core_base.h | 1 + 8 files changed, 78 insertions(+), 54 deletions(-) diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c index 1b1edd14f4bf..01a2691dfb47 100644 --- a/drivers/target/target_core_alua.c +++ b/drivers/target/target_core_alua.c @@ -78,7 +78,7 @@ int target_emulate_report_target_port_groups(struct se_task *task) return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); spin_lock(&su_dev->t10_alua.tg_pt_gps_lock); list_for_each_entry(tg_pt_gp, &su_dev->t10_alua.tg_pt_gps_list, @@ -163,7 +163,7 @@ int target_emulate_report_target_port_groups(struct se_task *task) buf[2] = ((rd_len >> 8) & 0xff); buf[3] = (rd_len & 0xff); - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); task->task_scsi_status = GOOD; transport_complete_task(task, 1); @@ -194,7 +194,7 @@ int target_emulate_set_target_port_groups(struct se_task *task) cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); /* * Determine if explict ALUA via SET_TARGET_PORT_GROUPS is allowed @@ -351,7 +351,7 @@ int target_emulate_set_target_port_groups(struct se_task *task) } out: - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); task->task_scsi_status = GOOD; transport_complete_task(task, 1); return 0; diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c index 2f2235edefff..07a3025d0622 100644 --- a/drivers/target/target_core_cdb.c +++ b/drivers/target/target_core_cdb.c @@ -83,7 +83,7 @@ target_emulate_inquiry_std(struct se_cmd *cmd) return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); if (dev == tpg->tpg_virt_lun0.lun_se_dev) { buf[0] = 0x3f; /* Not connected */ @@ -134,7 +134,7 @@ target_emulate_inquiry_std(struct se_cmd *cmd) buf[4] = 31; /* Set additional length to 31 */ out: - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); return 0; } @@ -716,7 +716,7 @@ int target_emulate_inquiry(struct se_task *task) return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); buf[0] = dev->transport->get_device_type(dev); @@ -733,7 +733,7 @@ int target_emulate_inquiry(struct se_task *task) ret = -EINVAL; out_unmap: - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); out: if (!ret) { task->task_scsi_status = GOOD; @@ -755,7 +755,7 @@ int target_emulate_readcapacity(struct se_task *task) else blocks = (u32)blocks_long; - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); buf[0] = (blocks >> 24) & 0xff; buf[1] = (blocks >> 16) & 0xff; @@ -771,7 +771,7 @@ int target_emulate_readcapacity(struct se_task *task) if (dev->se_sub_dev->se_dev_attrib.emulate_tpu || dev->se_sub_dev->se_dev_attrib.emulate_tpws) put_unaligned_be32(0xFFFFFFFF, &buf[0]); - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); task->task_scsi_status = GOOD; transport_complete_task(task, 1); @@ -785,7 +785,7 @@ int target_emulate_readcapacity_16(struct se_task *task) unsigned char *buf; unsigned long long blocks = dev->transport->get_blocks(dev); - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); buf[0] = (blocks >> 56) & 0xff; buf[1] = (blocks >> 48) & 0xff; @@ -806,7 +806,7 @@ int target_emulate_readcapacity_16(struct se_task *task) if (dev->se_sub_dev->se_dev_attrib.emulate_tpu || dev->se_sub_dev->se_dev_attrib.emulate_tpws) buf[14] = 0x80; - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); task->task_scsi_status = GOOD; transport_complete_task(task, 1); @@ -1019,9 +1019,9 @@ int target_emulate_modesense(struct se_task *task) offset = cmd->data_length; } - rbuf = transport_kmap_first_data_page(cmd); + rbuf = transport_kmap_data_sg(cmd); memcpy(rbuf, buf, offset); - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); task->task_scsi_status = GOOD; transport_complete_task(task, 1); @@ -1043,7 +1043,7 @@ int target_emulate_request_sense(struct se_task *task) return -ENOSYS; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); if (!core_scsi3_ua_clear_for_request_sense(cmd, &ua_asc, &ua_ascq)) { /* @@ -1089,7 +1089,7 @@ int target_emulate_request_sense(struct se_task *task) } end: - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); task->task_scsi_status = GOOD; transport_complete_task(task, 1); return 0; @@ -1123,7 +1123,7 @@ int target_emulate_unmap(struct se_task *task) dl = get_unaligned_be16(&cdb[0]); bd_dl = get_unaligned_be16(&cdb[2]); - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); ptr = &buf[offset]; pr_debug("UNMAP: Sub: %s Using dl: %hu bd_dl: %hu size: %hu" @@ -1147,7 +1147,7 @@ int target_emulate_unmap(struct se_task *task) } err: - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); if (!ret) { task->task_scsi_status = GOOD; transport_complete_task(task, 1); diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index de5f4fea7f62..edbcabbf85f7 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -657,7 +657,7 @@ int target_report_luns(struct se_task *se_task) unsigned char *buf; u32 cdb_offset = 0, lun_count = 0, offset = 8, i; - buf = transport_kmap_first_data_page(se_cmd); + buf = (unsigned char *) transport_kmap_data_sg(se_cmd); /* * If no struct se_session pointer is present, this struct se_cmd is @@ -695,7 +695,7 @@ int target_report_luns(struct se_task *se_task) * See SPC3 r07, page 159. */ done: - transport_kunmap_first_data_page(se_cmd); + transport_kunmap_data_sg(se_cmd); lun_count *= 8; buf[0] = ((lun_count >> 24) & 0xff); buf[1] = ((lun_count >> 16) & 0xff); diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index 68c71cd7a88e..b7c779389eea 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -1535,7 +1535,7 @@ static int core_scsi3_decode_spec_i_port( tidh_new->dest_local_nexus = 1; list_add_tail(&tidh_new->dest_list, &tid_dest_list); - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); /* * For a PERSISTENT RESERVE OUT specify initiator ports payload, * first extract TransportID Parameter Data Length, and make sure @@ -1786,7 +1786,7 @@ static int core_scsi3_decode_spec_i_port( } - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); /* * Go ahead and create a registrations from tid_dest_list for the @@ -1834,7 +1834,7 @@ static int core_scsi3_decode_spec_i_port( return 0; out: - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); /* * For the failure case, release everything from tid_dest_list * including *dest_pr_reg and the configfs dependances.. @@ -3411,14 +3411,14 @@ static int core_scsi3_emulate_pro_register_and_move( * will be moved to for the TransportID containing SCSI initiator WWN * information. */ - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); rtpi = (buf[18] & 0xff) << 8; rtpi |= buf[19] & 0xff; tid_len = (buf[20] & 0xff) << 24; tid_len |= (buf[21] & 0xff) << 16; tid_len |= (buf[22] & 0xff) << 8; tid_len |= buf[23] & 0xff; - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); buf = NULL; if ((tid_len + 24) != cmd->data_length) { @@ -3470,7 +3470,7 @@ static int core_scsi3_emulate_pro_register_and_move( return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); proto_ident = (buf[24] & 0x0f); #if 0 pr_debug("SPC-3 PR REGISTER_AND_MOVE: Extracted Protocol Identifier:" @@ -3504,7 +3504,7 @@ static int core_scsi3_emulate_pro_register_and_move( goto out; } - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); buf = NULL; pr_debug("SPC-3 PR [%s] Extracted initiator %s identifier: %s" @@ -3769,13 +3769,13 @@ after_iport_check: " REGISTER_AND_MOVE\n"); } - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); core_scsi3_put_pr_reg(dest_pr_reg); return 0; out: if (buf) - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); if (dest_se_deve) core_scsi3_lunacl_undepend_item(dest_se_deve); if (dest_node_acl) @@ -3849,7 +3849,7 @@ int target_scsi3_emulate_pr_out(struct se_task *task) scope = (cdb[2] & 0xf0); type = (cdb[2] & 0x0f); - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); /* * From PERSISTENT_RESERVE_OUT parameter list (payload) */ @@ -3867,7 +3867,7 @@ int target_scsi3_emulate_pr_out(struct se_task *task) aptpl = (buf[17] & 0x01); unreg = (buf[17] & 0x02); } - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); buf = NULL; /* @@ -3967,7 +3967,7 @@ static int core_scsi3_pri_read_keys(struct se_cmd *cmd) return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); buf[0] = ((su_dev->t10_pr.pr_generation >> 24) & 0xff); buf[1] = ((su_dev->t10_pr.pr_generation >> 16) & 0xff); buf[2] = ((su_dev->t10_pr.pr_generation >> 8) & 0xff); @@ -4001,7 +4001,7 @@ static int core_scsi3_pri_read_keys(struct se_cmd *cmd) buf[6] = ((add_len >> 8) & 0xff); buf[7] = (add_len & 0xff); - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); return 0; } @@ -4027,7 +4027,7 @@ static int core_scsi3_pri_read_reservation(struct se_cmd *cmd) return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); buf[0] = ((su_dev->t10_pr.pr_generation >> 24) & 0xff); buf[1] = ((su_dev->t10_pr.pr_generation >> 16) & 0xff); buf[2] = ((su_dev->t10_pr.pr_generation >> 8) & 0xff); @@ -4086,7 +4086,7 @@ static int core_scsi3_pri_read_reservation(struct se_cmd *cmd) err: spin_unlock(&se_dev->dev_reservation_lock); - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); return 0; } @@ -4110,7 +4110,7 @@ static int core_scsi3_pri_report_capabilities(struct se_cmd *cmd) return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); buf[0] = ((add_len << 8) & 0xff); buf[1] = (add_len & 0xff); @@ -4142,7 +4142,7 @@ static int core_scsi3_pri_report_capabilities(struct se_cmd *cmd) buf[4] |= 0x02; /* PR_TYPE_WRITE_EXCLUSIVE */ buf[5] |= 0x01; /* PR_TYPE_EXCLUSIVE_ACCESS_ALLREG */ - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); return 0; } @@ -4172,7 +4172,7 @@ static int core_scsi3_pri_read_full_status(struct se_cmd *cmd) return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); buf[0] = ((su_dev->t10_pr.pr_generation >> 24) & 0xff); buf[1] = ((su_dev->t10_pr.pr_generation >> 16) & 0xff); @@ -4293,7 +4293,7 @@ static int core_scsi3_pri_read_full_status(struct se_cmd *cmd) buf[6] = ((add_len >> 8) & 0xff); buf[7] = (add_len & 0xff); - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); return 0; } diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c index d35467d42e12..8d4def30e9e8 100644 --- a/drivers/target/target_core_pscsi.c +++ b/drivers/target/target_core_pscsi.c @@ -693,7 +693,7 @@ static int pscsi_transport_complete(struct se_task *task) if (task->task_se_cmd->se_deve->lun_flags & TRANSPORT_LUNFLAGS_READ_ONLY) { - unsigned char *buf = transport_kmap_first_data_page(task->task_se_cmd); + unsigned char *buf = transport_kmap_data_sg(task->task_se_cmd); if (cdb[0] == MODE_SENSE_10) { if (!(buf[3] & 0x80)) @@ -703,7 +703,7 @@ static int pscsi_transport_complete(struct se_task *task) buf[2] |= 0x80; } - transport_kunmap_first_data_page(task->task_se_cmd); + transport_kunmap_data_sg(task->task_se_cmd); } } after_mode_sense: diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index e186f7db3860..cf996d81cfcb 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -3084,11 +3084,6 @@ static int transport_generic_cmd_sequencer( (cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB))) goto out_unsupported_cdb; - /* Let's limit control cdbs to a page, for simplicity's sake. */ - if ((cmd->se_cmd_flags & SCF_SCSI_CONTROL_SG_IO_CDB) && - size > PAGE_SIZE) - goto out_invalid_cdb_field; - transport_set_supported_SAM_opcode(cmd); return ret; @@ -3492,9 +3487,11 @@ int transport_generic_map_mem_to_cmd( } EXPORT_SYMBOL(transport_generic_map_mem_to_cmd); -void *transport_kmap_first_data_page(struct se_cmd *cmd) +void *transport_kmap_data_sg(struct se_cmd *cmd) { struct scatterlist *sg = cmd->t_data_sg; + struct page **pages; + int i; BUG_ON(!sg); /* @@ -3502,15 +3499,41 @@ void *transport_kmap_first_data_page(struct se_cmd *cmd) * tcm_loop who may be using a contig buffer from the SCSI midlayer for * control CDBs passed as SGLs via transport_generic_map_mem_to_cmd() */ - return kmap(sg_page(sg)) + sg->offset; + if (!cmd->t_data_nents) + return NULL; + else if (cmd->t_data_nents == 1) + return kmap(sg_page(sg)) + sg->offset; + + /* >1 page. use vmap */ + pages = kmalloc(sizeof(*pages) * cmd->t_data_nents, GFP_KERNEL); + if (!pages) + return NULL; + + /* convert sg[] to pages[] */ + for_each_sg(cmd->t_data_sg, sg, cmd->t_data_nents, i) { + pages[i] = sg_page(sg); + } + + cmd->t_data_vmap = vmap(pages, cmd->t_data_nents, VM_MAP, PAGE_KERNEL); + kfree(pages); + if (!cmd->t_data_vmap) + return NULL; + + return cmd->t_data_vmap + cmd->t_data_sg[0].offset; } -EXPORT_SYMBOL(transport_kmap_first_data_page); +EXPORT_SYMBOL(transport_kmap_data_sg); -void transport_kunmap_first_data_page(struct se_cmd *cmd) +void transport_kunmap_data_sg(struct se_cmd *cmd) { - kunmap(sg_page(cmd->t_data_sg)); + if (!cmd->t_data_nents) + return; + else if (cmd->t_data_nents == 1) + kunmap(sg_page(cmd->t_data_sg)); + + vunmap(cmd->t_data_vmap); + cmd->t_data_vmap = NULL; } -EXPORT_SYMBOL(transport_kunmap_first_data_page); +EXPORT_SYMBOL(transport_kunmap_data_sg); static int transport_generic_get_mem(struct se_cmd *cmd) diff --git a/include/target/target_core_backend.h b/include/target/target_core_backend.h index 4866499bdeeb..e5e6ff98f0fa 100644 --- a/include/target/target_core_backend.h +++ b/include/target/target_core_backend.h @@ -59,7 +59,7 @@ int transport_set_vpd_ident_type(struct t10_vpd *, unsigned char *); int transport_set_vpd_ident(struct t10_vpd *, unsigned char *); /* core helpers also used by command snooping in pscsi */ -void *transport_kmap_first_data_page(struct se_cmd *); -void transport_kunmap_first_data_page(struct se_cmd *); +void *transport_kmap_data_sg(struct se_cmd *); +void transport_kunmap_data_sg(struct se_cmd *); #endif /* TARGET_CORE_BACKEND_H */ diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index daf532bc721a..dc4e345a0163 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -582,6 +582,7 @@ struct se_cmd { struct scatterlist *t_data_sg; unsigned int t_data_nents; + void *t_data_vmap; struct scatterlist *t_bidi_data_sg; unsigned int t_bidi_data_nents; -- cgit v1.2.1 From 2f9bc894c67dbacae5a6a9875818d2a18a918d18 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Mon, 16 Jan 2012 23:33:48 -0800 Subject: iscsi-target: Fix discovery with INADDR_ANY and IN6ADDR_ANY_INIT This patch addresses a bug with sendtargets discovery where INADDR_ANY (0.0.0.0) + IN6ADDR_ANY_INIT ([0:0:0:0:0:0:0:0]) network portals where incorrectly being reported back to initiators instead of the address of the connecting interface. To address this, save local socket ->getname() output during iscsi login setup, and makes iscsit_build_sendtargets_response() return these TargetAddress keys when INADDR_ANY or IN6ADDR_ANY_INIT portals are in use. Reported-by: Dax Kelson Reported-by: Andy Grover Cc: David S. Miller Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 37 +++++++++++++++++++++++++++---- drivers/target/iscsi/iscsi_target_core.h | 2 ++ drivers/target/iscsi/iscsi_target_login.c | 31 ++++++++++++++++++++++---- 3 files changed, 62 insertions(+), 8 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 6e070e0a8393..44262908def5 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -3164,6 +3164,30 @@ static int iscsit_send_task_mgt_rsp( return 0; } +static bool iscsit_check_inaddr_any(struct iscsi_np *np) +{ + bool ret = false; + + if (np->np_sockaddr.ss_family == AF_INET6) { + const struct sockaddr_in6 sin6 = { + .sin6_addr = IN6ADDR_ANY_INIT }; + struct sockaddr_in6 *sock_in6 = + (struct sockaddr_in6 *)&np->np_sockaddr; + + if (!memcmp(sock_in6->sin6_addr.s6_addr, + sin6.sin6_addr.s6_addr, 16)) + ret = true; + } else { + struct sockaddr_in * sock_in = + (struct sockaddr_in *)&np->np_sockaddr; + + if (sock_in->sin_addr.s_addr == INADDR_ANY) + ret = true; + } + + return ret; +} + static int iscsit_build_sendtargets_response(struct iscsi_cmd *cmd) { char *payload = NULL; @@ -3213,12 +3237,17 @@ static int iscsit_build_sendtargets_response(struct iscsi_cmd *cmd) spin_lock(&tpg->tpg_np_lock); list_for_each_entry(tpg_np, &tpg->tpg_gnp_list, tpg_np_list) { + struct iscsi_np *np = tpg_np->tpg_np; + bool inaddr_any = iscsit_check_inaddr_any(np); + len = sprintf(buf, "TargetAddress=" "%s%s%s:%hu,%hu", - (tpg_np->tpg_np->np_sockaddr.ss_family == AF_INET6) ? - "[" : "", tpg_np->tpg_np->np_ip, - (tpg_np->tpg_np->np_sockaddr.ss_family == AF_INET6) ? - "]" : "", tpg_np->tpg_np->np_port, + (np->np_sockaddr.ss_family == AF_INET6) ? + "[" : "", (inaddr_any == false) ? + np->np_ip : conn->local_ip, + (np->np_sockaddr.ss_family == AF_INET6) ? + "]" : "", (inaddr_any == false) ? + np->np_port : conn->local_port, tpg->tpgt); len += 1; diff --git a/drivers/target/iscsi/iscsi_target_core.h b/drivers/target/iscsi/iscsi_target_core.h index ebf81fdbb5c5..0ec3b77a0c27 100644 --- a/drivers/target/iscsi/iscsi_target_core.h +++ b/drivers/target/iscsi/iscsi_target_core.h @@ -508,6 +508,7 @@ struct iscsi_conn { u16 cid; /* Remote TCP Port */ u16 login_port; + u16 local_port; int net_size; u32 auth_id; #define CONNFLAG_SCTP_STRUCT_FILE 0x01 @@ -527,6 +528,7 @@ struct iscsi_conn { unsigned char bad_hdr[ISCSI_HDR_LEN]; #define IPV6_ADDRESS_SPACE 48 unsigned char login_ip[IPV6_ADDRESS_SPACE]; + unsigned char local_ip[IPV6_ADDRESS_SPACE]; int conn_usage_count; int conn_waiting_on_uc; atomic_t check_immediate_queue; diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c index 373b0cc6abd8..ec47a7c5966e 100644 --- a/drivers/target/iscsi/iscsi_target_login.c +++ b/drivers/target/iscsi/iscsi_target_login.c @@ -615,8 +615,8 @@ static int iscsi_post_login_handler( } pr_debug("iSCSI Login successful on CID: %hu from %s to" - " %s:%hu,%hu\n", conn->cid, conn->login_ip, np->np_ip, - np->np_port, tpg->tpgt); + " %s:%hu,%hu\n", conn->cid, conn->login_ip, + conn->local_ip, conn->local_port, tpg->tpgt); list_add_tail(&conn->conn_list, &sess->sess_conn_list); atomic_inc(&sess->nconn); @@ -658,7 +658,8 @@ static int iscsi_post_login_handler( sess->session_state = TARG_SESS_STATE_LOGGED_IN; pr_debug("iSCSI Login successful on CID: %hu from %s to %s:%hu,%hu\n", - conn->cid, conn->login_ip, np->np_ip, np->np_port, tpg->tpgt); + conn->cid, conn->login_ip, conn->local_ip, conn->local_port, + tpg->tpgt); spin_lock_bh(&sess->conn_lock); list_add_tail(&conn->conn_list, &sess->sess_conn_list); @@ -1020,6 +1021,18 @@ static int __iscsi_target_login_thread(struct iscsi_np *np) snprintf(conn->login_ip, sizeof(conn->login_ip), "%pI6c", &sock_in6.sin6_addr.in6_u); conn->login_port = ntohs(sock_in6.sin6_port); + + if (conn->sock->ops->getname(conn->sock, + (struct sockaddr *)&sock_in6, &err, 0) < 0) { + pr_err("sock_ops->getname() failed.\n"); + iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR, + ISCSI_LOGIN_STATUS_TARGET_ERROR); + goto new_sess_out; + } + snprintf(conn->local_ip, sizeof(conn->local_ip), "%pI6c", + &sock_in6.sin6_addr.in6_u); + conn->local_port = ntohs(sock_in6.sin6_port); + } else { memset(&sock_in, 0, sizeof(struct sockaddr_in)); @@ -1032,6 +1045,16 @@ static int __iscsi_target_login_thread(struct iscsi_np *np) } sprintf(conn->login_ip, "%pI4", &sock_in.sin_addr.s_addr); conn->login_port = ntohs(sock_in.sin_port); + + if (conn->sock->ops->getname(conn->sock, + (struct sockaddr *)&sock_in, &err, 0) < 0) { + pr_err("sock_ops->getname() failed.\n"); + iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR, + ISCSI_LOGIN_STATUS_TARGET_ERROR); + goto new_sess_out; + } + sprintf(conn->local_ip, "%pI4", &sock_in.sin_addr.s_addr); + conn->local_port = ntohs(sock_in.sin_port); } conn->network_transport = np->np_network_transport; @@ -1039,7 +1062,7 @@ static int __iscsi_target_login_thread(struct iscsi_np *np) pr_debug("Received iSCSI login request from %s on %s Network" " Portal %s:%hu\n", conn->login_ip, (conn->network_transport == ISCSI_TCP) ? "TCP" : "SCTP", - np->np_ip, np->np_port); + conn->local_ip, conn->local_port); pr_debug("Moving to TARG_CONN_STATE_IN_LOGIN.\n"); conn->conn_state = TARG_CONN_STATE_IN_LOGIN; -- cgit v1.2.1 From bb1acb2ee038a6c13ee99e0b9fb44dacb4a9de84 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 17 Jan 2012 18:00:56 -0800 Subject: target: Return correct ASC for unimplemented VPD pages My draft of SPC-4 says: If the device server does not implement the requested vital product data page, then the command shall be terminated with CHECK CONDITION status, with the sense key set to ILLEGAL REQUEST, and the additional sense code set to INVALID FIELD IN CDB. Signed-off-by: Roland Dreier Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_cdb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c index 07a3025d0622..370ad13930a4 100644 --- a/drivers/target/target_core_cdb.c +++ b/drivers/target/target_core_cdb.c @@ -729,7 +729,7 @@ int target_emulate_inquiry(struct se_task *task) } pr_err("Unknown VPD Code: 0x%02x\n", cdb[2]); - cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; ret = -EINVAL; out_unmap: -- cgit v1.2.1 From bf0053550aebe56f3bb5dd793e9de69238b5b945 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 17 Jan 2012 18:00:57 -0800 Subject: target: Fail INQUIRY commands with EVPD==0 but PAGE CODE!=0 My draft of SPC-4 says: If the PAGE CODE field is not set to zero when the EVPD bit is set to zero, the command shall be terminated with CHECK CONDITION status, with the sense key set to ILLEGAL REQUEST, and the additional sense code set to INVALID FIELD IN CDB. Signed-off-by: Roland Dreier Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_cdb.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c index 370ad13930a4..a9bbf5a5cc27 100644 --- a/drivers/target/target_core_cdb.c +++ b/drivers/target/target_core_cdb.c @@ -698,6 +698,13 @@ int target_emulate_inquiry(struct se_task *task) int p, ret; if (!(cdb[1] & 0x1)) { + if (cdb[2]) { + pr_err("INQUIRY with EVPD==0 but PAGE CODE=%02x\n", + cdb[2]); + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; + } + ret = target_emulate_inquiry_std(cmd); goto out; } -- cgit v1.2.1 From 482835ce02726652becc36b64522cbabc0adbeee Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 18 Jan 2012 10:24:17 +0100 Subject: sh: sh7757lcr: update to the new MMCIF DMA configuration Specifying MMCIF DMA slave IDs via a struct sh_mmcif_dma instance is deprecated. Update sh7757lcr to specify slave IDs embedded in struct sh_mmcif_plat_data. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt --- arch/sh/boards/board-sh7757lcr.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c index 33dc5b6e8e17..8d2ae109a83a 100644 --- a/arch/sh/boards/board-sh7757lcr.c +++ b/arch/sh/boards/board-sh7757lcr.c @@ -210,21 +210,13 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh7757lcr_mmcif_dma = { - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - } -}; - static struct sh_mmcif_plat_data sh_mmcif_plat = { - .dma = &sh7757lcr_mmcif_dma, .sup_pclk = 0x0f, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, .ocr = MMC_VDD_32_33 | MMC_VDD_33_34, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device sh_mmcif_device = { -- cgit v1.2.1 From 833218f16b1fbfdff0dbb9ac477cf0c6e85cd4f5 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 18 Jan 2012 01:44:22 -0800 Subject: sh: clock-sh7724: fixup sh_fsi clock settings sh_fsi needs HWBLK_SPU clock on sh7724 Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/clock-sh7724.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c index b3c039a5064a..70bd96646f42 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c @@ -343,7 +343,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[HWBLK_CEU1]), CLKDEV_CON_ID("beu1", &mstp_clks[HWBLK_BEU1]), CLKDEV_CON_ID("2ddmac0", &mstp_clks[HWBLK_2DDMAC]), - CLKDEV_CON_ID("spu0", &mstp_clks[HWBLK_SPU]), + CLKDEV_DEV_ID("sh_fsi.0", &mstp_clks[HWBLK_SPU]), CLKDEV_CON_ID("jpu0", &mstp_clks[HWBLK_JPU]), CLKDEV_DEV_ID("sh-vou.0", &mstp_clks[HWBLK_VOU]), CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU0]), -- cgit v1.2.1 From 0ada2da51800a4914887a9bcf22d563be80e50be Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 18 Jan 2012 17:32:05 -0800 Subject: ARM: mach-shmobile: mackerel: use renesas_usbhs instead of r8a66597_hcd Current renesas_usbhs driver can use both USB host/gadget. This patch removes current r8a66597_hcd driver settings, and adds renesas_usbhs host driver settings for mackerel USB1 port. You can still use this port as "gadget" with small modify. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-mackerel.c | 73 ++++----------------------------- 1 file changed, 9 insertions(+), 64 deletions(-) diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 9b42fbd10f8e..f0cc307df640 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -43,7 +43,6 @@ #include #include #include -#include #include #include @@ -145,11 +144,6 @@ * 1-2 short | VBUS 5V | Host * open | external VBUS | Function * - * *1 - * CN31 is used as - * CONFIG_USB_R8A66597_HCD Host - * CONFIG_USB_RENESAS_USBHS Function - * * CAUTION * * renesas_usbhs driver can use external interrupt mode @@ -161,15 +155,6 @@ * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0", * because Touchscreen is using IRQ7-PORT40. * It is impossible to use IRQ7 demux on this board. - * - * We can use external interrupt mode USB-Function on "USB1". - * USB1 can become Host by r8a66597, and become Function by renesas_usbhs. - * But don't select both drivers in same time. - * These uses same IRQ number for request_irq(), and aren't supporting - * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE. - * - * Actually these are old/new version of USB driver. - * This mean its register will be broken if it supports shared IRQ, */ /* @@ -676,51 +661,16 @@ static struct platform_device usbhs0_device = { * Use J30 to select between Host and Function. This setting * can however not be detected by software. Hotplug of USBHS1 * is provided via IRQ8. + * + * Current USB1 works as "USB Host". + * - set J30 "short" + * + * If you want to use it as "USB gadget", + * - J30 "open" + * - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET + * - add .get_vbus = usbhs_get_vbus in usbhs1_private */ #define IRQ8 evt2irq(0x0300) - -/* USBHS1 USB Host support via r8a66597_hcd */ -static void usb1_host_port_power(int port, int power) -{ - if (!power) /* only power-on is supported for now */ - return; - - /* set VBOUT/PWEN and EXTLP1 in DVSTCTR */ - __raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008); -} - -static struct r8a66597_platdata usb1_host_data = { - .on_chip = 1, - .port_power = usb1_host_port_power, -}; - -static struct resource usb1_host_resources[] = { - [0] = { - .name = "USBHS1", - .start = 0xe68b0000, - .end = 0xe68b00e6 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x1ce0) /* USB1_USB1I0 */, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device usb1_host_device = { - .name = "r8a66597_hcd", - .id = 1, - .dev = { - .dma_mask = NULL, /* not use dma */ - .coherent_dma_mask = 0xffffffff, - .platform_data = &usb1_host_data, - }, - .num_resources = ARRAY_SIZE(usb1_host_resources), - .resource = usb1_host_resources, -}; - -/* USBHS1 USB Function support via renesas_usbhs */ - #define USB_PHY_MODE (1 << 4) #define USB_PHY_INT_EN ((1 << 3) | (1 << 2)) #define USB_PHY_ON (1 << 1) @@ -776,7 +726,7 @@ static void usbhs1_hardware_exit(struct platform_device *pdev) static int usbhs1_get_id(struct platform_device *pdev) { - return USBHS_GADGET; + return USBHS_HOST; } static u32 usbhs1_pipe_cfg[] = { @@ -807,7 +757,6 @@ static struct usbhs_private usbhs1_private = { .hardware_exit = usbhs1_hardware_exit, .get_id = usbhs1_get_id, .phy_reset = usbhs_phy_reset, - .get_vbus = usbhs_get_vbus, }, .driver_param = { .buswait_bwait = 4, @@ -1311,7 +1260,6 @@ static struct platform_device *mackerel_devices[] __initdata = { &nor_flash_device, &smc911x_device, &lcdc_device, - &usb1_host_device, &usbhs1_device, &usbhs0_device, &leds_device, @@ -1473,9 +1421,6 @@ static void __init mackerel_init(void) gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */ gpio_request(GPIO_FN_IDIN_1_113, NULL); - /* USB phy tweak to make the r8a66597_hcd host driver work */ - __raw_writew(0x8a0a, 0xe6058130); /* USBCR4 */ - /* enable FSI2 port A (ak4643) */ gpio_request(GPIO_FN_FSIAIBT, NULL); gpio_request(GPIO_FN_FSIAILR, NULL); -- cgit v1.2.1 From 6d9b7dd0da1b619ed5f89ff7ab4bc3188c0f7e9f Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 18 Jan 2012 16:37:07 -0800 Subject: ARM: mach-shmobile: mackerel: add ak4642 amixer settings on comment current ak4642 needs amixer settings for playing which was not needed on old kernel. This patch show it on comment area Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-mackerel.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index f0cc307df640..c4a6a9b16d1b 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -192,6 +192,16 @@ * */ +/* + * FSI - AK4642 + * + * it needs amixer settings for playing + * + * amixer set "Headphone" on + * amixer set "HPOUTL Mixer DACH" on + * amixer set "HPOUTR Mixer DACH" on + */ + /* * FIXME !! * -- cgit v1.2.1 From df0793abb929e66606fa25f3875ff1b89de5ad32 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Thu, 19 Jan 2012 09:20:09 +0100 Subject: block,cfq: change code order cfq_slice_expired will change saved_workload_slice. It should be called first so saved_workload_slice is correctly set to 0 after workload type is changed. This fixes the code order changed by 54b466e44b1c7. Tested-by: Tetsuo Handa Signed-off-by: Shaohua Li Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index ee55019066a1..da21c24dbed3 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -3117,17 +3117,18 @@ cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq, */ static void cfq_preempt_queue(struct cfq_data *cfqd, struct cfq_queue *cfqq) { + enum wl_type_t old_type = cfqq_type(cfqd->active_queue); + cfq_log_cfqq(cfqd, cfqq, "preempt"); + cfq_slice_expired(cfqd, 1); /* * workload type is changed, don't save slice, otherwise preempt * doesn't happen */ - if (cfqq_type(cfqd->active_queue) != cfqq_type(cfqq)) + if (old_type != cfqq_type(cfqq)) cfqq->cfqg->saved_workload_slice = 0; - cfq_slice_expired(cfqd, 1); - /* * Put the new queue at the front of the of the current list, * so we know that it will be selected next. -- cgit v1.2.1 From 05c30b9551f1904d9950ad0d28e65fc4ff3c8a8e Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Thu, 19 Jan 2012 09:20:10 +0100 Subject: block: fix NULL icq_cache reference Vivek reported a kernel crash: [ 94.217015] BUG: unable to handle kernel NULL pointer dereference at 000000000000001c [ 94.218004] IP: [] kmem_cache_free+0x5e/0x200 [ 94.218004] PGD 13abda067 PUD 137d52067 PMD 0 [ 94.218004] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 94.218004] CPU 0 [ 94.218004] Modules linked in: [last unloaded: scsi_wait_scan] [ 94.218004] [ 94.218004] Pid: 0, comm: swapper/0 Not tainted 3.2.0+ #16 Hewlett-Packard HP xw6600 Workstation/0A9Ch [ 94.218004] RIP: 0010:[] [] kmem_cache_free+0x5e/0x200 [ 94.218004] RSP: 0018:ffff88013fc03de0 EFLAGS: 00010006 [ 94.218004] RAX: ffffffff81e0d020 RBX: ffff880138b3c680 RCX: 00000001801c001b [ 94.218004] RDX: 00000000003aac1d RSI: ffff880138b3c680 RDI: ffffffff81142fae [ 94.218004] RBP: ffff88013fc03e10 R08: ffff880137830238 R09: 0000000000000001 [ 94.218004] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 94.218004] R13: ffffea0004e2cf00 R14: ffffffff812f6eb6 R15: 0000000000000246 [ 94.218004] FS: 0000000000000000(0000) GS:ffff88013fc00000(0000) knlGS:0000000000000000 [ 94.218004] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 94.218004] CR2: 000000000000001c CR3: 00000001395ab000 CR4: 00000000000006f0 [ 94.218004] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 94.218004] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 94.218004] Process swapper/0 (pid: 0, threadinfo ffffffff81e00000, task ffffffff81e0d020) [ 94.218004] Stack: [ 94.218004] 0000000000000102 ffff88013fc0db20 ffffffff81e22700 ffff880139500f00 [ 94.218004] 0000000000000001 000000000000000a ffff88013fc03e20 ffffffff812f6eb6 [ 94.218004] ffff88013fc03e90 ffffffff810c8da2 ffffffff81e01fd8 ffff880137830240 [ 94.218004] Call Trace: [ 94.218004] [ 94.218004] [] icq_free_icq_rcu+0x16/0x20 [ 94.218004] [] __rcu_process_callbacks+0x1c2/0x420 [ 94.218004] [] rcu_process_callbacks+0x38/0x250 [ 94.218004] [] __do_softirq+0xce/0x3e0 [ 94.218004] [] ? clockevents_program_event+0x74/0x100 [ 94.218004] [] ? tick_program_event+0x24/0x30 [ 94.218004] [] call_softirq+0x1c/0x30 [ 94.218004] [] do_softirq+0x8d/0xc0 [ 94.218004] [] irq_exit+0xae/0xe0 [ 94.218004] [] smp_apic_timer_interrupt+0x6e/0x99 [ 94.218004] [] apic_timer_interrupt+0x70/0x80 Once a queue is quiesced, it's not supposed to have any elvpriv data or icq's, and elevator switching depends on that. Request alloc path followed the rule for elvpriv data but forgot apply it to icq's leading to the following crash during elevator switch. Fix it by not allocating icq's if ELVPRIV is not set for the request. Reported-by: Vivek Goyal Tested-by: Vivek Goyal Signed-off-by: Shaohua Li Acked-by: Tejun Heo Signed-off-by: Jens Axboe --- block/blk-core.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index e6c05a97ee2b..636702575118 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -872,13 +872,15 @@ retry: spin_unlock_irq(q->queue_lock); /* create icq if missing */ - if (unlikely(et->icq_cache && !icq)) + if ((rw_flags & REQ_ELVPRIV) && unlikely(et->icq_cache && !icq)) { icq = ioc_create_icq(q, gfp_mask); + if (!icq) + goto fail_icq; + } - /* rqs are guaranteed to have icq on elv_set_request() if requested */ - if (likely(!et->icq_cache || icq)) - rq = blk_alloc_request(q, icq, rw_flags, gfp_mask); + rq = blk_alloc_request(q, icq, rw_flags, gfp_mask); +fail_icq: if (unlikely(!rq)) { /* * Allocation failed presumably due to memory. Undo anything -- cgit v1.2.1 From 6c5aa407d52e9e40c2e31a3dfa5cb19a9672bf36 Mon Sep 17 00:00:00 2001 From: "Cousson, Benoit" Date: Fri, 20 Jan 2012 16:55:04 +0100 Subject: i2c: OMAP: Fix OMAP1 build error CONFIG_OF is not defined for OMAP1 yet and thus the omap1_defconfig build generate an error for 3.3-rc1. drivers/i2c/busses/i2c-omap.c: In function 'omap_i2c_probe': drivers/i2c/busses/i2c-omap.c:1021:26: error: 'omap_i2c_of_match' undeclared (first use in this function) drivers/i2c/busses/i2c-omap.c:1021:26: note: each undeclared identifier is reported only once for each function it appears in Wrap omap_i2c_of_match with of_match_ptr() to prevent compilation error in case of OMAP1 build. Signed-off-by: Benoit Cousson Cc: Ben Dooks Signed-off-by: Tony Lindgren --- drivers/i2c/busses/i2c-omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index f713eac55047..801df6000e9b 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1018,7 +1018,7 @@ omap_i2c_probe(struct platform_device *pdev) goto err_release_region; } - match = of_match_device(omap_i2c_of_match, &pdev->dev); + match = of_match_device(of_match_ptr(omap_i2c_of_match), &pdev->dev); if (match) { u32 freq = 100000; /* default to 100000 Hz */ -- cgit v1.2.1 From 7080727c207f569751e94aaed7d94e873c69115f Mon Sep 17 00:00:00 2001 From: Felipe Contreras Date: Fri, 20 Jan 2012 05:38:30 -0800 Subject: ARM: OMAP2: fix omap3 touchbook kconfig warning warning: (MACH_OMAP3_TOUCHBOOK && DRM_RADEON_KMS && DRM_I915 && STUB_POULSBO && FB_BACKLIGHT && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_ASUS && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) A lot of boards need BACKLIGHT_CLASS_DEVICE for the framebuffers to work, but it's not *needed* for the device itself. It might be nice to enable it by default somewhoe if graphics stuff is enabled, but that's another story. Signed-off-by: Felipe Contreras Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index a8ba7b96dcd1..782a909b3331 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -220,7 +220,6 @@ config MACH_OMAP3_TOUCHBOOK bool "OMAP3 Touch Book" depends on ARCH_OMAP3 default y - select BACKLIGHT_CLASS_DEVICE config MACH_OMAP_3430SDP bool "OMAP 3430 SDP board" -- cgit v1.2.1 From a075ccc6810dd2532d6bca548bd6e3b59105bd82 Mon Sep 17 00:00:00 2001 From: Felipe Contreras Date: Fri, 20 Jan 2012 05:38:31 -0800 Subject: ARM: OMAP2: fix regulator warnings warning: (MACH_OMAP_ZOOM2 && MACH_OMAP_ZOOM3 && MACH_OMAP_4430SDP && MACH_OMAP4_PANDA && TPS6105X) selects REGULATOR_FIXED_VOLTAGE which has unmet direct dependencies (REGULATOR) Signed-off-by: Felipe Contreras Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 782a909b3331..c7261082f00d 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -214,7 +214,7 @@ config MACH_OMAP3_PANDORA depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_OMAP3_TOUCHBOOK bool "OMAP3 Touch Book" @@ -265,7 +265,7 @@ config MACH_OMAP_ZOOM2 select SERIAL_8250 select SERIAL_CORE_CONSOLE select SERIAL_8250_CONSOLE - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_OMAP_ZOOM3 bool "OMAP3630 Zoom3 board" @@ -275,7 +275,7 @@ config MACH_OMAP_ZOOM3 select SERIAL_8250 select SERIAL_CORE_CONSOLE select SERIAL_8250_CONSOLE - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_CM_T35 bool "CompuLab CM-T35/CM-T3730 modules" @@ -334,7 +334,7 @@ config MACH_OMAP_4430SDP depends on ARCH_OMAP4 select OMAP_PACKAGE_CBL select OMAP_PACKAGE_CBS - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_OMAP4_PANDA bool "OMAP4 Panda Board" @@ -342,7 +342,7 @@ config MACH_OMAP4_PANDA depends on ARCH_OMAP4 select OMAP_PACKAGE_CBL select OMAP_PACKAGE_CBS - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config OMAP3_EMU bool "OMAP3 debugging peripherals" -- cgit v1.2.1 From 7c655099b25c889c1268dba894fbc5d515097752 Mon Sep 17 00:00:00 2001 From: Bas van den Berg Date: Mon, 16 Jan 2012 07:46:02 +0100 Subject: ARM: davinci: DA850: remove non-existing pll1_sysclk4-7 clocks DA850: sysclk4-7 only exist for pll0. for pll1 sysclk1-3 exist. Remove the non-existing clocks. Signed-off-by: Bas van den Berg Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/da850.c | 32 -------------------------------- 1 file changed, 32 deletions(-) diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 0ed7fdb64efb..992c4c410185 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -153,34 +153,6 @@ static struct clk pll1_sysclk3 = { .div_reg = PLLDIV3, }; -static struct clk pll1_sysclk4 = { - .name = "pll1_sysclk4", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV4, -}; - -static struct clk pll1_sysclk5 = { - .name = "pll1_sysclk5", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV5, -}; - -static struct clk pll1_sysclk6 = { - .name = "pll0_sysclk6", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV6, -}; - -static struct clk pll1_sysclk7 = { - .name = "pll1_sysclk7", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV7, -}; - static struct clk i2c0_clk = { .name = "i2c0", .parent = &pll0_aux_clk, @@ -397,10 +369,6 @@ static struct clk_lookup da850_clks[] = { CLK(NULL, "pll1_aux", &pll1_aux_clk), CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), - CLK(NULL, "pll1_sysclk4", &pll1_sysclk4), - CLK(NULL, "pll1_sysclk5", &pll1_sysclk5), - CLK(NULL, "pll1_sysclk6", &pll1_sysclk6), - CLK(NULL, "pll1_sysclk7", &pll1_sysclk7), CLK("i2c_davinci.1", NULL, &i2c0_clk), CLK(NULL, "timer0", &timerp64_0_clk), CLK("watchdog", NULL, &timerp64_1_clk), -- cgit v1.2.1 From b469d4329cf949043f9b93a6644f2c64015ef8cd Mon Sep 17 00:00:00 2001 From: Tiejun Chen Date: Wed, 11 Jan 2012 05:51:10 +0000 Subject: kmemleak: Only scan non-zero-size areas Kmemleak should only track valid scan areas with a non-zero size. Otherwise, such area may reside just at the end of an object and kmemleak would report "Adding scan area to unknown object". Signed-off-by: Tiejun Chen Signed-off-by: Catalin Marinas --- mm/kmemleak.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/kmemleak.c b/mm/kmemleak.c index c833addd94d7..f9f7310f0fdb 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -1036,7 +1036,7 @@ void __ref kmemleak_scan_area(const void *ptr, size_t size, gfp_t gfp) { pr_debug("%s(0x%p)\n", __func__, ptr); - if (atomic_read(&kmemleak_enabled) && ptr && !IS_ERR(ptr)) + if (atomic_read(&kmemleak_enabled) && ptr && size && !IS_ERR(ptr)) add_scan_area((unsigned long)ptr, size, gfp); else if (atomic_read(&kmemleak_early_log)) log_early(KMEMLEAK_SCAN_AREA, ptr, size, 0); -- cgit v1.2.1 From b370d29ea7565a638ccf85389488364b5abb39fa Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 20 Jan 2012 10:42:40 +0000 Subject: kmemleak: Disable early logging when kmemleak is off by default Commit b6693005 (kmemleak: When the early log buffer is exceeded, report the actual number) deferred the disabling of the early logging to kmemleak_init(). However, when CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y, the early logging was no longer disabled causing __init kmemleak functions to be called even after the kernel freed the init memory. This patch disables the early logging during kmemleak_init() if kmemleak is left disabled. Reported-by: Dirk Gouders Tested-by: Dirk Gouders Tested-by: Josh Boyer Signed-off-by: Catalin Marinas --- mm/kmemleak.c | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/kmemleak.c b/mm/kmemleak.c index f9f7310f0fdb..45eb6217bf38 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -1757,6 +1757,7 @@ void __init kmemleak_init(void) #ifdef CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF if (!kmemleak_skip_disable) { + atomic_set(&kmemleak_early_log, 0); kmemleak_disable(); return; } -- cgit v1.2.1 From 26dd8e0291fd699142722632c6588a438d6ef0e4 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sat, 21 Jan 2012 00:15:23 +0900 Subject: percpu: use bitmap_clear Use bitmap_clear rather than clearing individual bits in a memory region. Signed-off-by: Akinobu Mita Acked-by: Christoph Lameter Signed-off-by: Tejun Heo --- mm/percpu-vm.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/mm/percpu-vm.c b/mm/percpu-vm.c index 12a48a88c0d8..405d331804c3 100644 --- a/mm/percpu-vm.c +++ b/mm/percpu-vm.c @@ -184,8 +184,7 @@ static void pcpu_unmap_pages(struct pcpu_chunk *chunk, page_end - page_start); } - for (i = page_start; i < page_end; i++) - __clear_bit(i, populated); + bitmap_clear(populated, page_start, page_end - page_start); } /** -- cgit v1.2.1 From 95120d5d1bc17bdec29085186b6ab3d90e92d6f3 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Sun, 22 Jan 2012 18:57:57 +0100 Subject: Correct bad gpio naming One of the GPIO names in drivers/gpio/gpio-lpc32xx.c was bad. Renaming gpi000 -> gpio00 Signed-off-by: Roland Stigge Signed-off-by: Grant Likely --- drivers/gpio/gpio-lpc32xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-lpc32xx.c b/drivers/gpio/gpio-lpc32xx.c index 5b6948081f8f..ddfacc5ce56d 100644 --- a/drivers/gpio/gpio-lpc32xx.c +++ b/drivers/gpio/gpio-lpc32xx.c @@ -96,7 +96,7 @@ static const char *gpio_p2_names[LPC32XX_GPIO_P2_MAX] = { }; static const char *gpio_p3_names[LPC32XX_GPIO_P3_MAX] = { - "gpi000", "gpio01", "gpio02", "gpio03", + "gpio00", "gpio01", "gpio02", "gpio03", "gpio04", "gpio05" }; -- cgit v1.2.1 From af1be04901e27ce669b4ecde1c953d5c939498f5 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Wed, 18 Jan 2012 14:03:11 +0100 Subject: iommu/amd: Work around broken IVRS tables On some systems the IVRS table does not contain all PCI devices present in the system. In case a device not present in the IVRS table is translated by the IOMMU no DMA is possible from that device by default. This patch fixes this by removing the DTE entry for every PCI device present in the system and not covered by IVRS. Cc: stable@vger.kernel.org # >= 3.0 Signed-off-by: Joerg Roedel --- drivers/iommu/amd_iommu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c index cce1f03b8895..f75e0608be5b 100644 --- a/drivers/iommu/amd_iommu.c +++ b/drivers/iommu/amd_iommu.c @@ -2863,6 +2863,9 @@ static unsigned device_dma_ops_init(void) for_each_pci_dev(pdev) { if (!check_device(&pdev->dev)) { + + iommu_ignore_device(&pdev->dev); + unhandled += 1; continue; } -- cgit v1.2.1 From 620c231c7a7f48745094727bb612f6321cfc8844 Mon Sep 17 00:00:00 2001 From: Lucas De Marchi Date: Tue, 17 Jan 2012 14:50:51 -0200 Subject: kbuild: do not check for ancient modutils tools scripts/depmod.sh checks for the output of '-V' expecting that it has module-init-tools in it. It's a hack to prevent users from using modutils instead of module-init-tools, that only works with 2.4.x kernels. This however prints an annoying warning for kmod tool, that is currently replacing module-init-tools. Rather than putting another check for kmod's version, just remove it since users of 2.4.x kernel are unlikely to upgrade to 3.x, and if they do, let depmod fail in that case because they should know what they are doing. Signed-off-by: Lucas De Marchi Acked-by: WANG Cong Acked-By: Kay Sievers Signed-off-by: Michal Marek --- scripts/depmod.sh | 6 ------ 1 file changed, 6 deletions(-) diff --git a/scripts/depmod.sh b/scripts/depmod.sh index a27235685949..2ae481703141 100755 --- a/scripts/depmod.sh +++ b/scripts/depmod.sh @@ -9,12 +9,6 @@ fi DEPMOD=$1 KERNELRELEASE=$2 -if ! "$DEPMOD" -V 2>/dev/null | grep -q module-init-tools; then - echo "Warning: you may need to install module-init-tools" >&2 - echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt" >&2 - sleep 1 -fi - if ! test -r System.map -a -x "$DEPMOD"; then exit 0 fi -- cgit v1.2.1 From d07a74a546981a09ba490936645fbf0d1340b96c Mon Sep 17 00:00:00 2001 From: "Dr. David Alan Gilbert" Date: Thu, 25 Aug 2011 16:13:55 -0700 Subject: dmaengine: fix missing 'cnt' in ?: in dmatest Hi, On the latest tree my compiler has started giving the warning: drivers/dma/dmatest.c:575:28: warning: the omitted middle operand in ?: will always be ?true?, suggest explicit middle operand [-Wparentheses] The following patch fixes the missing middle clause with the same fix that Nicolas Ferre used in the similar clauses. (There seems to have been a race between him fixing that and the extra clause going in a little later). I don't actually know the dmatest code/structures, nor do I own any hardware to test it on (assuming it needs a DMA engine); but this patch builds, the existing code is almost certainly wrong and the fix is the same as the corresponding lines above it. (WTH is x=y?:z legal C anyway?) Signed-off-by: Dr. David Alan Gilbert Reported-by: Dan Carpenter Reported-by: Paul Gortmaker Acked-by: Nicolas Ferre Signed-off-by: Dan Williams --- drivers/dma/dmatest.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index 2b8661b54eaf..24225f0fdcd8 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -599,7 +599,7 @@ static int dmatest_add_channel(struct dma_chan *chan) } if (dma_has_cap(DMA_PQ, dma_dev->cap_mask)) { cnt = dmatest_add_threads(dtc, DMA_PQ); - thread_count += cnt > 0 ?: 0; + thread_count += cnt > 0 ? cnt : 0; } pr_info("dmatest: Started %u threads using %s\n", -- cgit v1.2.1 From 04f47a03c51c9f02fa27b0ecf4207e25c0741804 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Sun, 22 Jan 2012 14:57:25 -0500 Subject: arm: fix compile failure in mach-shmobile/board-ag5evm.c Add videodev2 header which provides V4L2_PIX_FMT_RGB565 to fix: arch/arm/mach-shmobile/board-ag5evm.c:274: error: 'V4L2_PIX_FMT_RGB565' undeclared here (not in a function) Signed-off-by: Paul Gortmaker Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ag5evm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index a4e6ca04e319..75596948029c 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.1 From f5948bac5f22e7697fc782e45bdca20a27368512 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 22 Jan 2012 21:10:02 -0800 Subject: ARM: mach-shmobile: clock-sh73a0: add DSIxPHY clock support Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ag5evm.c | 16 +++-- arch/arm/mach-shmobile/clock-sh73a0.c | 113 ++++++++++++++++++++++++++++++++++ 2 files changed, 125 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index 729eaee5a151..2e1334f56995 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -314,12 +314,11 @@ static struct resource mipidsi0_resources[] = { }, }; -#define DSI0PHYCR 0xe615006c static int sh_mipi_set_dot_clock(struct platform_device *pdev, void __iomem *base, int enable) { - struct clk *pck; + struct clk *pck, *phy; int ret; pck = clk_get(&pdev->dev, "dsip_clk"); @@ -328,18 +327,27 @@ static int sh_mipi_set_dot_clock(struct platform_device *pdev, goto sh_mipi_set_dot_clock_pck_err; } + phy = clk_get(&pdev->dev, "dsiphy_clk"); + if (IS_ERR(phy)) { + ret = PTR_ERR(phy); + goto sh_mipi_set_dot_clock_phy_err; + } + if (enable) { clk_set_rate(pck, clk_round_rate(pck, 24000000)); - __raw_writel(0x2a809010, DSI0PHYCR); + clk_set_rate(phy, clk_round_rate(pck, 510000000)); clk_enable(pck); + clk_enable(phy); } else { clk_disable(pck); + clk_disable(phy); } ret = 0; + clk_put(phy); +sh_mipi_set_dot_clock_phy_err: clk_put(pck); - sh_mipi_set_dot_clock_pck_err: return ret; } diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index afbead6a6e17..7727cca6136c 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -365,6 +365,114 @@ static struct clk div6_clks[DIV6_NR] = { dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3), }; +/* DSI DIV */ +static unsigned long dsiphy_recalc(struct clk *clk) +{ + u32 value; + + value = __raw_readl(clk->mapping->base); + + /* FIXME */ + if (!(value & 0x000B8000)) + return clk->parent->rate; + + value &= 0x3f; + value += 1; + + if ((value < 12) || + (value > 33)) { + pr_err("DSIPHY has wrong value (%d)", value); + return 0; + } + + return clk->parent->rate / value; +} + +static long dsiphy_round_rate(struct clk *clk, unsigned long rate) +{ + return clk_rate_mult_range_round(clk, 12, 33, rate); +} + +static void dsiphy_disable(struct clk *clk) +{ + u32 value; + + value = __raw_readl(clk->mapping->base); + value &= ~0x000B8000; + + __raw_writel(value , clk->mapping->base); +} + +static int dsiphy_enable(struct clk *clk) +{ + u32 value; + int multi; + + value = __raw_readl(clk->mapping->base); + multi = (value & 0x3f) + 1; + + if ((multi < 12) || (multi > 33)) + return -EIO; + + __raw_writel(value | 0x000B8000, clk->mapping->base); + + return 0; +} + +static int dsiphy_set_rate(struct clk *clk, unsigned long rate) +{ + u32 value; + int idx; + + idx = rate / clk->parent->rate; + if ((idx < 12) || (idx > 33)) + return -EINVAL; + + idx += -1; + + value = __raw_readl(clk->mapping->base); + value = (value & ~0x3f) + idx; + + __raw_writel(value, clk->mapping->base); + + return 0; +} + +static struct clk_ops dsiphy_clk_ops = { + .recalc = dsiphy_recalc, + .round_rate = dsiphy_round_rate, + .set_rate = dsiphy_set_rate, + .enable = dsiphy_enable, + .disable = dsiphy_disable, +}; + +static struct clk_mapping dsi0phy_clk_mapping = { + .phys = DSI0PHYCR, + .len = 4, +}; + +static struct clk_mapping dsi1phy_clk_mapping = { + .phys = DSI1PHYCR, + .len = 4, +}; + +static struct clk dsi0phy_clk = { + .ops = &dsiphy_clk_ops, + .parent = &div6_clks[DIV6_DSI0P], /* late install */ + .mapping = &dsi0phy_clk_mapping, +}; + +static struct clk dsi1phy_clk = { + .ops = &dsiphy_clk_ops, + .parent = &div6_clks[DIV6_DSI1P], /* late install */ + .mapping = &dsi1phy_clk_mapping, +}; + +static struct clk *late_main_clks[] = { + &dsi0phy_clk, + &dsi1phy_clk, +}; + enum { MSTP001, MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100, MSTP219, @@ -429,6 +537,8 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]), CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]), CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]), + CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk), + CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk), /* MSTP32 clocks */ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */ @@ -504,6 +614,9 @@ void __init sh73a0_clock_init(void) if (!ret) ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) + ret = clk_register(late_main_clks[k]); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); if (!ret) -- cgit v1.2.1 From 4856f1946d1f404f6ff96857d5a895187d9caa8b Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 23 Jan 2012 15:52:03 +0100 Subject: ARM: mach-shmobile: add GPIO-to-IRQ translation to sh7372 This table is required to support the gpio_to_irq() translation. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/pfc-sh7372.c | 41 +++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c index 1bd6585a6acf..336093f9210a 100644 --- a/arch/arm/mach-shmobile/pfc-sh7372.c +++ b/arch/arm/mach-shmobile/pfc-sh7372.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #define CPU_ALL_PORT(fn, pfx, sfx) \ @@ -1594,6 +1595,43 @@ static struct pinmux_data_reg pinmux_data_regs[] = { { }, }; +#define EXT_IRQ16L(n) evt2irq(0x200 + ((n) << 5)) +#define EXT_IRQ16H(n) evt2irq(0x3200 + (((n) - 16) << 5)) +static struct pinmux_irq pinmux_irqs[] = { + PINMUX_IRQ(EXT_IRQ16L(0), PORT6_FN0, PORT162_FN0), + PINMUX_IRQ(EXT_IRQ16L(1), PORT12_FN0), + PINMUX_IRQ(EXT_IRQ16L(2), PORT4_FN0, PORT5_FN0), + PINMUX_IRQ(EXT_IRQ16L(3), PORT8_FN0, PORT16_FN0), + PINMUX_IRQ(EXT_IRQ16L(4), PORT17_FN0, PORT163_FN0), + PINMUX_IRQ(EXT_IRQ16L(5), PORT18_FN0), + PINMUX_IRQ(EXT_IRQ16L(6), PORT39_FN0, PORT164_FN0), + PINMUX_IRQ(EXT_IRQ16L(7), PORT40_FN0, PORT167_FN0), + PINMUX_IRQ(EXT_IRQ16L(8), PORT41_FN0, PORT168_FN0), + PINMUX_IRQ(EXT_IRQ16L(9), PORT42_FN0, PORT169_FN0), + PINMUX_IRQ(EXT_IRQ16L(10), PORT65_FN0), + PINMUX_IRQ(EXT_IRQ16L(11), PORT67_FN0), + PINMUX_IRQ(EXT_IRQ16L(12), PORT80_FN0, PORT137_FN0), + PINMUX_IRQ(EXT_IRQ16L(13), PORT81_FN0, PORT145_FN0), + PINMUX_IRQ(EXT_IRQ16L(14), PORT82_FN0, PORT146_FN0), + PINMUX_IRQ(EXT_IRQ16L(15), PORT83_FN0, PORT147_FN0), + PINMUX_IRQ(EXT_IRQ16H(16), PORT84_FN0, PORT170_FN0), + PINMUX_IRQ(EXT_IRQ16H(17), PORT85_FN0), + PINMUX_IRQ(EXT_IRQ16H(18), PORT86_FN0), + PINMUX_IRQ(EXT_IRQ16H(19), PORT87_FN0), + PINMUX_IRQ(EXT_IRQ16H(20), PORT92_FN0), + PINMUX_IRQ(EXT_IRQ16H(21), PORT93_FN0), + PINMUX_IRQ(EXT_IRQ16H(22), PORT94_FN0), + PINMUX_IRQ(EXT_IRQ16H(23), PORT95_FN0), + PINMUX_IRQ(EXT_IRQ16H(24), PORT112_FN0), + PINMUX_IRQ(EXT_IRQ16H(25), PORT119_FN0), + PINMUX_IRQ(EXT_IRQ16H(26), PORT121_FN0, PORT172_FN0), + PINMUX_IRQ(EXT_IRQ16H(27), PORT122_FN0, PORT180_FN0), + PINMUX_IRQ(EXT_IRQ16H(28), PORT123_FN0, PORT181_FN0), + PINMUX_IRQ(EXT_IRQ16H(29), PORT129_FN0, PORT182_FN0), + PINMUX_IRQ(EXT_IRQ16H(30), PORT130_FN0, PORT183_FN0), + PINMUX_IRQ(EXT_IRQ16H(31), PORT138_FN0, PORT184_FN0), +}; + static struct pinmux_info sh7372_pinmux_info = { .name = "sh7372_pfc", .reserved_id = PINMUX_RESERVED, @@ -1614,6 +1652,9 @@ static struct pinmux_info sh7372_pinmux_info = { .gpio_data = pinmux_data, .gpio_data_size = ARRAY_SIZE(pinmux_data), + + .gpio_irq = pinmux_irqs, + .gpio_irq_size = ARRAY_SIZE(pinmux_irqs), }; void sh7372_pinmux_init(void) -- cgit v1.2.1 From 64dea57588f49736c2a7778292f3967c7984ab94 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 19 Jan 2012 01:00:40 -0800 Subject: sh: clkfwk: bugfix: use clk_reparent() for div6 clocks Various problems will happen if clk parent was set up directly. it should use clk_reparent() Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- drivers/sh/clk/cpg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/sh/clk/cpg.c b/drivers/sh/clk/cpg.c index 45fee368b092..92d314a73f69 100644 --- a/drivers/sh/clk/cpg.c +++ b/drivers/sh/clk/cpg.c @@ -190,7 +190,7 @@ static int __init sh_clk_init_parent(struct clk *clk) return -EINVAL; } - clk->parent = clk->parent_table[val]; + clk_reparent(clk, clk->parent_table[val]); if (!clk->parent) { pr_err("sh_clk_init_parent: unable to set parent"); return -EINVAL; -- cgit v1.2.1 From f02432571ad52fcfb7e7c676d81f902a0351a8af Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Thu, 22 Dec 2011 14:03:12 +0000 Subject: ARM: tegra: dma: fix buildbreak for !CONFIG_TEGRA_SYSTEM_DMA There's no need to keep the DMA_REQ_SEL defines inside the ifdef. Fixes the following build break with CONFIG_TEGRA_SYSTEM_DMA=n: arch/arm/mach-tegra/devices.c:645: error: 'TEGRA_DMA_REQ_SEL_I2S_1' undeclared here (not in a function) arch/arm/mach-tegra/devices.c:663: error: 'TEGRA_DMA_REQ_SEL_I2S2_1' undeclared here (not in a function) arch/arm/mach-tegra/devices.c:663: error: initializer element is not constant arch/arm/mach-tegra/devices.c:663: error: (near initialization for 'i2s_resource2[1].start') arch/arm/mach-tegra/devices.c:664: error: initializer element is not constant arch/arm/mach-tegra/devices.c:664: error: (near initialization for 'i2s_resource2[1].end') Signed-off-by: Olof Johansson Acked-by: Stephen Warren --- arch/arm/mach-tegra/include/mach/dma.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-tegra/include/mach/dma.h b/arch/arm/mach-tegra/include/mach/dma.h index d0132e8031a1..3c9339058bec 100644 --- a/arch/arm/mach-tegra/include/mach/dma.h +++ b/arch/arm/mach-tegra/include/mach/dma.h @@ -23,11 +23,6 @@ #include -#if defined(CONFIG_TEGRA_SYSTEM_DMA) - -struct tegra_dma_req; -struct tegra_dma_channel; - #define TEGRA_DMA_REQ_SEL_CNTR 0 #define TEGRA_DMA_REQ_SEL_I2S_2 1 #define TEGRA_DMA_REQ_SEL_I2S_1 2 @@ -56,6 +51,11 @@ struct tegra_dma_channel; #define TEGRA_DMA_REQ_SEL_OWR 25 #define TEGRA_DMA_REQ_SEL_INVALID 31 +#if defined(CONFIG_TEGRA_SYSTEM_DMA) + +struct tegra_dma_req; +struct tegra_dma_channel; + enum tegra_dma_mode { TEGRA_DMA_SHARED = 1, TEGRA_DMA_MODE_CONTINOUS = 2, -- cgit v1.2.1 From 803ab977618eae2b292cda0a97eed75f42250ddf Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 24 Jan 2012 11:39:22 +0300 Subject: cifs: NULL dereference on allocation failure We should just return directly here, the goto causes a NULL dereference. Signed-off-by: Dan Carpenter Reviewed-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/connect.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 986709a8d903..026d6464335b 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -3857,10 +3857,8 @@ cifs_construct_tcon(struct cifs_sb_info *cifs_sb, uid_t fsuid) struct smb_vol *vol_info; vol_info = kzalloc(sizeof(*vol_info), GFP_KERNEL); - if (vol_info == NULL) { - tcon = ERR_PTR(-ENOMEM); - goto out; - } + if (vol_info == NULL) + return ERR_PTR(-ENOMEM); vol_info->local_nls = cifs_sb->local_nls; vol_info->linux_uid = fsuid; -- cgit v1.2.1 From ecd9d34a674b671f09f55b3365d852f75a1f598b Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Sun, 22 Jan 2012 23:24:15 -0500 Subject: c2port: fix build error for duramar2150 due to missing header. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This file needs the basic headers for resource management, otherwise we will see this build error: CC [M] drivers/misc/c2port/c2port-duramar2150.o drivers/misc/c2port/c2port-duramar2150.c: In function ‘duramar2150_c2port_init’: drivers/misc/c2port/c2port-duramar2150.c:125:2: error: implicit declaration of function ‘request_region’ [-Werror=implicit-function-declaration] drivers/misc/c2port/c2port-duramar2150.c:139:2: error: implicit declaration of function ‘release_region’ [-Werror=implicit-function-declaration] Signed-off-by: Paul Gortmaker Signed-off-by: Greg Kroah-Hartman --- drivers/misc/c2port/c2port-duramar2150.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/misc/c2port/c2port-duramar2150.c b/drivers/misc/c2port/c2port-duramar2150.c index 778fc3fdfb9b..5484301d57d9 100644 --- a/drivers/misc/c2port/c2port-duramar2150.c +++ b/drivers/misc/c2port/c2port-duramar2150.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #define DATA_PORT 0x325 -- cgit v1.2.1 From 7c5763b8453a94871d356f20df30f350f8631e8b Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 24 Jan 2012 02:11:25 -0200 Subject: drivers: misc: Remove MISC_DEVICES config option MISC_DEVICES option alone does not select any kernel code and can cause dependency build warnings, such as: warning: (KS8851 && AX88796_93CX6 && RTL8180 && RTL8187 && ADM8211 && RT2400PCI && RT2500PCI && RT61PCI && RT2800PCI && R8187SE) selects EEPROM_93CX6 which has unmet direct dependencies (MISC_DEVICES) As the current drivers/misc/Kconfig stands, it is only possible to select the drivers below if MISC_DEVICES option is selected: source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" source "drivers/misc/cb710/Kconfig" source "drivers/misc/iwmc3200top/Kconfig" source "drivers/misc/ti-st/Kconfig" source "drivers/misc/lis3lv02d/Kconfig" source "drivers/misc/carma/Kconfig" source "drivers/misc/altera-stapl/Kconfig" So remove MISC_DEVICES option so that nothing is dependant on it. Signed-off-by: Fabio Estevam Acked-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- drivers/misc/Kconfig | 17 +++-------------- drivers/mmc/host/Kconfig | 1 - drivers/net/ethernet/micrel/Kconfig | 1 - 3 files changed, 3 insertions(+), 16 deletions(-) diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 6a1a092db146..c7795096d43b 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -2,24 +2,14 @@ # Misc strange devices # -# This one has to live outside of the MISC_DEVICES conditional, -# because it may be selected by drivers/platform/x86/hp_accel. +menu "Misc devices" + config SENSORS_LIS3LV02D tristate depends on INPUT select INPUT_POLLDEV default n -menuconfig MISC_DEVICES - bool "Misc devices" - ---help--- - Say Y here to get to see options for device drivers from various - different categories. This option alone does not add any kernel code. - - If you say N, all options in this submenu will be skipped and disabled. - -if MISC_DEVICES - config AD525X_DPOT tristate "Analog Devices Digital Potentiometers" depends on (I2C || SPI) && SYSFS @@ -516,5 +506,4 @@ source "drivers/misc/ti-st/Kconfig" source "drivers/misc/lis3lv02d/Kconfig" source "drivers/misc/carma/Kconfig" source "drivers/misc/altera-stapl/Kconfig" - -endif # MISC_DEVICES +endmenu diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index cf444b0ca2cc..00fcbed1afd2 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -477,7 +477,6 @@ config MMC_SDHI config MMC_CB710 tristate "ENE CB710 MMC/SD Interface support" depends on PCI - select MISC_DEVICES select CB710_CORE help This option enables support for MMC/SD part of ENE CB710/720 Flash diff --git a/drivers/net/ethernet/micrel/Kconfig b/drivers/net/ethernet/micrel/Kconfig index 1ea811cf515b..fe42fc00d8d3 100644 --- a/drivers/net/ethernet/micrel/Kconfig +++ b/drivers/net/ethernet/micrel/Kconfig @@ -42,7 +42,6 @@ config KS8851 select NET_CORE select MII select CRC32 - select MISC_DEVICES select EEPROM_93CX6 ---help--- SPI driver for Micrel KS8851 SPI attached network chip. -- cgit v1.2.1 From 9fb83526a898f14adbd3f6f52fa7126f528f15ac Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 25 Jan 2012 15:19:20 +0000 Subject: ASoC: wm5100: Make sure we switch to button reporting mode When we have identified an accessory make sure we've flagged that we've done so in order to make sure we always report buttons and don't continue to polarity flip. Signed-off-by: Mark Brown --- sound/soc/codecs/wm5100.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/wm5100.c b/sound/soc/codecs/wm5100.c index 66f0611e68b6..3f8fd3ca9454 100644 --- a/sound/soc/codecs/wm5100.c +++ b/sound/soc/codecs/wm5100.c @@ -2183,6 +2183,7 @@ static void wm5100_micd_irq(struct snd_soc_codec *codec) if (wm5100->jack_detecting) { dev_dbg(codec->dev, "Microphone detected\n"); wm5100->jack_mic = true; + wm5100->jack_detecting = false; snd_soc_jack_report(wm5100->jack, SND_JACK_HEADSET, SND_JACK_HEADSET | SND_JACK_BTN_0); @@ -2221,6 +2222,7 @@ static void wm5100_micd_irq(struct snd_soc_codec *codec) SND_JACK_BTN_0); } else if (wm5100->jack_detecting) { dev_dbg(codec->dev, "Headphone detected\n"); + wm5100->jack_detecting = false; snd_soc_jack_report(wm5100->jack, SND_JACK_HEADPHONE, SND_JACK_HEADPHONE); -- cgit v1.2.1 From a188fcba73837f83a78dc90a44998a978f50ac83 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 25 Jan 2012 17:57:16 +0000 Subject: ASoC: wm5100: Fix microphone configuration We need to write the configuration for each microphone to a different register. Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm5100.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm5100.c b/sound/soc/codecs/wm5100.c index 3f8fd3ca9454..fb757af19363 100644 --- a/sound/soc/codecs/wm5100.c +++ b/sound/soc/codecs/wm5100.c @@ -2612,6 +2612,13 @@ static const struct regmap_config wm5100_regmap = { .cache_type = REGCACHE_RBTREE, }; +static const unsigned int wm5100_mic_ctrl_reg[] = { + WM5100_IN1L_CONTROL, + WM5100_IN2L_CONTROL, + WM5100_IN3L_CONTROL, + WM5100_IN4L_CONTROL, +}; + static __devinit int wm5100_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -2744,7 +2751,7 @@ static __devinit int wm5100_i2c_probe(struct i2c_client *i2c, } for (i = 0; i < ARRAY_SIZE(wm5100->pdata.in_mode); i++) { - regmap_update_bits(wm5100->regmap, WM5100_IN1L_CONTROL, + regmap_update_bits(wm5100->regmap, wm5100_mic_ctrl_reg[i], WM5100_IN1_MODE_MASK | WM5100_IN1_DMIC_SUP_MASK, (wm5100->pdata.in_mode[i] << -- cgit v1.2.1 From 1ac6d46e43a52a901dadde2a341204e9a1c9e147 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Mon, 23 Jan 2012 14:15:28 +0200 Subject: ARM: OMAP2+: hwmod data: split omap2/3 dispc hwmod class Currently OMAP2 and 3 share the same omap_hwmod_class and omap_hwmod_class_sysconfig for dispc. However, OMAP3 has sysconfig bits that OMAP2 doesn't have, so we need to split those structs into OMAP2 and OMAP3 specific versions. This patch only splits the structs, without changing the contents. This is a prerequisite for a subsequent fix. Signed-off-by: Tomi Valkeinen [paul@pwsan.com: added commit note] Signed-off-by: Paul Walmsley --- .../mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c | 21 -------------------- arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 22 +++++++++++++++++++++ arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 23 +++++++++++++++++++++- 3 files changed, 44 insertions(+), 22 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index c11273da5dcc..f08e442af397 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -55,27 +55,6 @@ struct omap_hwmod_class omap2_dss_hwmod_class = { .reset = omap_dss_reset, }; -/* - * 'dispc' class - * display controller - */ - -static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -struct omap_hwmod_class omap2_dispc_hwmod_class = { - .name = "dispc", - .sysc = &omap2_dispc_sysc, -}; - /* * 'rfbi' class * remote frame buffer interface diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index 177dee20faef..2a6729741b06 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -28,6 +28,28 @@ struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = { { .name = "dispc", .dma_req = 5 }, { .dma_req = -1 } }; + +/* + * 'dispc' class + * display controller + */ + +static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +struct omap_hwmod_class omap2_dispc_hwmod_class = { + .name = "dispc", + .sysc = &omap2_dispc_sysc, +}; + /* OMAP2xxx Timer Common */ static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = { .rev_offs = 0x0000, diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 5324e8d93bc0..c9653099c87e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1480,6 +1480,27 @@ static struct omap_hwmod omap3xxx_dss_core_hwmod = { .masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters), }; +/* + * 'dispc' class + * display controller + */ + +static struct omap_hwmod_class_sysconfig omap3_dispc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap3_dispc_hwmod_class = { + .name = "dispc", + .sysc = &omap3_dispc_sysc, +}; + /* l4_core -> dss_dispc */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dispc = { .master = &omap3xxx_l4_core_hwmod, @@ -1503,7 +1524,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dispc_slaves[] = { static struct omap_hwmod omap3xxx_dss_dispc_hwmod = { .name = "dss_dispc", - .class = &omap2_dispc_hwmod_class, + .class = &omap3_dispc_hwmod_class, .mpu_irqs = omap2_dispc_irqs, .main_clk = "dss1_alwon_fck", .prcm = { -- cgit v1.2.1 From b0a85faf0bf11862a2a466daa1b7dc1d45527e64 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Mon, 23 Jan 2012 14:15:29 +0200 Subject: ARM: OMAP3: hwmod data: add SYSC_HAS_ENAWAKEUP for dispc dispc's sysc_flags is missing SYSC_HAS_ENAWAKEUP flag. This seems to cause SYNC_LOST errors from the DSS when the power management is enabled. This patch adds the missing SYSC_HAS_ENAWAKEUP flag. Note that there are other flags missing also (clock activity, DSI's sysc flags), but as they are not critical, they will be fixed in the next merge window. Signed-off-by: Tomi Valkeinen Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index c9653099c87e..b176d44e6c94 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1490,7 +1490,8 @@ static struct omap_hwmod_class_sysconfig omap3_dispc_sysc = { .sysc_offs = 0x0010, .syss_offs = 0x0014, .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | + SYSC_HAS_ENAWAKEUP), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), .sysc_fields = &omap_hwmod_sysc_type1, -- cgit v1.2.1 From 6af486e2b3d45efca7c680aa7ce3bacebe22d7aa Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 28 Nov 2011 15:45:39 +0200 Subject: ARM: OMAP4: hwmod data: Add names for DMIC memory address space To be able to get the memory resources by name from the DMIC driver (for MPU and for DMA). Without this patch, functionality that was working in 3.2 breaks in 3.3-rc1. This patch should have gone in as part of the 3.3 merge window, but was inadvertently missed. Signed-off-by: Peter Ujfalusi [paul@pwsan.com: added commit message note] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index f9f151081760..ef0524c10a84 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1031,6 +1031,7 @@ static struct omap_hwmod_dma_info omap44xx_dmic_sdma_reqs[] = { static struct omap_hwmod_addr_space omap44xx_dmic_addrs[] = { { + .name = "mpu", .pa_start = 0x4012e000, .pa_end = 0x4012e07f, .flags = ADDR_TYPE_RT @@ -1049,6 +1050,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic = { static struct omap_hwmod_addr_space omap44xx_dmic_dma_addrs[] = { { + .name = "dma", .pa_start = 0x4902e000, .pa_end = 0x4902e07f, .flags = ADDR_TYPE_RT -- cgit v1.2.1 From 161107981df333955218bb0894f53b05b31da2ff Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 25 Jan 2012 12:57:46 -0700 Subject: ARM: OMAP2+: io: fix compilation breakage on 2420-only configs Commit 7b250aff1ce346b6c7bc0329a2350334d1c66525 ("ARM: OMAP: Avoid cpu_is_omapxxxx usage until map_io is done") breaks the build on a 2420-only config on v3.3-rc1: arch/arm/mach-omap2/built-in.o: In function `omap2430_init_early': arch/arm/mach-omap2/io.c:406: undefined reference to `omap2_set_globals_243x' arch/arm/mach-omap2/io.c:410: undefined reference to `omap243x_clockdomains_init' arch/arm/mach-omap2/io.c:411: undefined reference to `omap2430_hwmod_init' Fix by only compiling omap2420_init_early() when CONFIG_SOC_OMAP2420 is selected, and only compiling omap2430_init_early() when CONFIG_SOC_OMAP2430 is selected. Signed-off-by: Paul Walmsley Cc: Tony Lindgren --- arch/arm/mach-omap2/io.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 3f174d51f67f..eb50c29fb644 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -388,7 +388,7 @@ static void __init omap_hwmod_init_postsetup(void) omap_pm_if_early_init(); } -#ifdef CONFIG_ARCH_OMAP2 +#ifdef CONFIG_SOC_OMAP2420 void __init omap2420_init_early(void) { omap2_set_globals_242x(); @@ -400,7 +400,9 @@ void __init omap2420_init_early(void) omap_hwmod_init_postsetup(); omap2420_clk_init(); } +#endif +#ifdef CONFIG_SOC_OMAP2430 void __init omap2430_init_early(void) { omap2_set_globals_243x(); -- cgit v1.2.1 From d19e8f2e44a34b2a461f67ce9d0cb5bd43197c1e Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 25 Jan 2012 12:57:49 -0700 Subject: ARM: OMAP2/3: PRM: fix missing plat/irqs.h build breakage Commit 22f51371f8c35869ed850f46aa76b6cc2b502110 ("ARM: OMAP3: pm: use prcm chain handler") breaks the build on a 2420-only config, due to a missing include for plat/irqs.h: CC arch/arm/mach-omap2/prm2xxx_3xxx.o arch/arm/mach-omap2/prm2xxx_3xxx.c:41:11: error: 'INT_34XX_PRCM_MPU_IRQ' undeclared here (not in a function) Fix by explicitly including it. Signed-off-by: Paul Walmsley Cc: Tero Kristo Cc: Kevin Hilman --- arch/arm/mach-omap2/prm2xxx_3xxx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index c1c4d86a79a8..9ce765407ad5 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -19,6 +19,7 @@ #include "common.h" #include #include +#include #include "vp.h" -- cgit v1.2.1 From 1d2f56c84f100890476e62d83062cfe9965fc7b4 Mon Sep 17 00:00:00 2001 From: Ilya Yanok Date: Wed, 28 Dec 2011 00:31:33 +0100 Subject: ARM: OMAP3: hwmod data: register dss hwmods after dss_core dss_core has to be initialized before any other DSS hwmod. Currently this is broken as dss_core is listed in chip/revision specific hwmod lists while other DSS hwmods are listed in common list which is registered first. This patch moves DSS hwmods (except for dss_core) to the separate list which is registered last to ensure that dss_core is already registered. This solves the problem with BUG() in L3 interrupt handler on boards with DSS enabled in bootloader. The long-term fix to this is to ensure modules are set up in dependency order in the hwmod core code. CC: Tomi Valkeinen CC: Archit Taneja CC: Paul Walmsley Signed-off-by: Ilya Yanok [paul@pwsan.com: add notes that this is just a temporary workaround until hwmod dependencies are added] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 30 ++++++++++++++++++++++++------ 1 file changed, 24 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index b176d44e6c94..3c8dd928628e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -3545,12 +3545,6 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_uart2_hwmod, &omap3xxx_uart3_hwmod, - /* dss class */ - &omap3xxx_dss_dispc_hwmod, - &omap3xxx_dss_dsi1_hwmod, - &omap3xxx_dss_rfbi_hwmod, - &omap3xxx_dss_venc_hwmod, - /* i2c class */ &omap3xxx_i2c1_hwmod, &omap3xxx_i2c2_hwmod, @@ -3657,6 +3651,15 @@ static __initdata struct omap_hwmod *am35xx_hwmods[] = { NULL }; +static __initdata struct omap_hwmod *omap3xxx_dss_hwmods[] = { + /* dss class */ + &omap3xxx_dss_dispc_hwmod, + &omap3xxx_dss_dsi1_hwmod, + &omap3xxx_dss_rfbi_hwmod, + &omap3xxx_dss_venc_hwmod, + NULL +}; + int __init omap3xxx_hwmod_init(void) { int r; @@ -3730,6 +3733,21 @@ int __init omap3xxx_hwmod_init(void) if (h) r = omap_hwmod_register(h); + if (r < 0) + return r; + + /* + * DSS code presumes that dss_core hwmod is handled first, + * _before_ any other DSS related hwmods so register common + * DSS hwmods last to ensure that dss_core is already registered. + * Otherwise some change things may happen, for ex. if dispc + * is handled before dss_core and DSS is enabled in bootloader + * DIPSC will be reset with outputs enabled which sometimes leads + * to unrecoverable L3 error. + * XXX The long-term fix to this is to ensure modules are set up + * in dependency order in the hwmod core code. + */ + r = omap_hwmod_register(omap3xxx_dss_hwmods); return r; } -- cgit v1.2.1 From 1b76d2ee4012f325ae14e0e71dad1a0835195906 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 25 Jan 2012 21:10:07 +0000 Subject: ASoC: wm8996: Mark register cache as dirty when regulators are disabled Otherwise we won't resync later. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8996.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8996.c b/sound/soc/codecs/wm8996.c index 13aa2bdaa7d7..61f7daa4d0e6 100644 --- a/sound/soc/codecs/wm8996.c +++ b/sound/soc/codecs/wm8996.c @@ -108,7 +108,7 @@ static int wm8996_regulator_event_##n(struct notifier_block *nb, \ struct wm8996_priv *wm8996 = container_of(nb, struct wm8996_priv, \ disable_nb[n]); \ if (event & REGULATOR_EVENT_DISABLE) { \ - regcache_cache_only(wm8996->regmap, true); \ + regcache_mark_dirty(wm8996->regmap); \ } \ return 0; \ } -- cgit v1.2.1 From 5539a102882d5ddd1bb95ea9f6f43130a789cb7f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 25 Jan 2012 21:10:21 +0000 Subject: ASoC: wm8962: Mark register cache as dirty when regulators are disabled Otherwise we won't resync later. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8962.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 296de4e30d26..bda3da887d7e 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -96,7 +96,7 @@ static int wm8962_regulator_event_##n(struct notifier_block *nb, \ struct wm8962_priv *wm8962 = container_of(nb, struct wm8962_priv, \ disable_nb[n]); \ if (event & REGULATOR_EVENT_DISABLE) { \ - regcache_cache_only(wm8962->regmap, true); \ + regcache_mark_dirty(wm8962->regmap); \ } \ return 0; \ } -- cgit v1.2.1 From 5c1b136b7bf702e550039cb0039ec9c790c48f99 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 25 Jan 2012 21:10:33 +0000 Subject: ASoC: wm5100: Mark register cache as dirty when regulators are disabled Otherwise we won't resync later. Signed-off-by: Mark Brown --- sound/soc/codecs/wm5100.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/wm5100.c b/sound/soc/codecs/wm5100.c index fb757af19363..89f2af77b1c3 100644 --- a/sound/soc/codecs/wm5100.c +++ b/sound/soc/codecs/wm5100.c @@ -1405,6 +1405,7 @@ static int wm5100_set_bias_level(struct snd_soc_codec *codec, case SND_SOC_BIAS_OFF: regcache_cache_only(wm5100->regmap, true); + regcache_mark_dirty(wm5100->regmap); if (wm5100->pdata.ldo_ena) gpio_set_value_cansleep(wm5100->pdata.ldo_ena, 0); regulator_bulk_disable(ARRAY_SIZE(wm5100->core_supplies), -- cgit v1.2.1 From 58d7d18b5268febb8b1391c6dffc8e2aaa751fcd Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Thu, 26 Jan 2012 15:03:16 +1100 Subject: crypto: sha512 - Use binary and instead of modulus The previous patch used the modulus operator over a power of 2 unnecessarily which may produce suboptimal binary code. This patch changes changes them to binary ands instead. Signed-off-by: Herbert Xu --- crypto/sha512_generic.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/crypto/sha512_generic.c b/crypto/sha512_generic.c index 88f160b77b1f..3edebfd4dbec 100644 --- a/crypto/sha512_generic.c +++ b/crypto/sha512_generic.c @@ -78,7 +78,7 @@ static inline void LOAD_OP(int I, u64 *W, const u8 *input) static inline void BLEND_OP(int I, u64 *W) { - W[I % 16] += s1(W[(I-2) % 16]) + W[(I-7) % 16] + s0(W[(I-15) % 16]); + W[I & 15] += s1(W[(I-2) & 15]) + W[(I-7) & 15] + s0(W[(I-15) & 15]); } static void @@ -105,7 +105,7 @@ sha512_transform(u64 *state, const u8 *input) #define SHA512_16_79(i, a, b, c, d, e, f, g, h) \ BLEND_OP(i, W); \ - t1 = h + e1(e) + Ch(e, f, g) + sha512_K[i] + W[(i)%16]; \ + t1 = h + e1(e) + Ch(e, f, g) + sha512_K[i] + W[(i)&15]; \ t2 = e0(a) + Maj(a, b, c); \ d += t1; \ h = t1 + t2 -- cgit v1.2.1 From 0eaf9f52e94f756147dbfe1faf1f77a02378dbf9 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Mon, 23 Jan 2012 13:23:08 +0200 Subject: OMAPDSS: use sync versions of pm_runtime_put omapdss doesn't work properly on system suspend. The problem seems to be the fact that omapdss uses pm_runtime_put() functions when turning off the hardware, and when system suspend is in process only sync versions are allowed. Using non-sync versions normally and sync versions when suspending would need rather ugly hacks to convey the information of suspending/not-suspending to different functions. Optimally the driver wouldn't even need to care about this, and the PM layer would handle syncing when suspend is in process. This patch changes all omapdss's pm_runtime_put calls to pm_runtime_put_sync. This fixes the suspend problem, and probably the performance penalty of always using sync versions is negligible. Signed-off-by: Tomi Valkeinen Acked-by: Kevin Hilman --- drivers/video/omap2/dss/dispc.c | 2 +- drivers/video/omap2/dss/dsi.c | 2 +- drivers/video/omap2/dss/dss.c | 2 +- drivers/video/omap2/dss/hdmi.c | 2 +- drivers/video/omap2/dss/rfbi.c | 2 +- drivers/video/omap2/dss/venc.c | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c index a5ec7f37c185..e1626a1d5c45 100644 --- a/drivers/video/omap2/dss/dispc.c +++ b/drivers/video/omap2/dss/dispc.c @@ -401,7 +401,7 @@ void dispc_runtime_put(void) DSSDBG("dispc_runtime_put\n"); - r = pm_runtime_put(&dispc.pdev->dev); + r = pm_runtime_put_sync(&dispc.pdev->dev); WARN_ON(r < 0); } diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index 511ae2a7add8..04a89a7bbaf5 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -1079,7 +1079,7 @@ void dsi_runtime_put(struct platform_device *dsidev) DSSDBG("dsi_runtime_put\n"); - r = pm_runtime_put(&dsi->pdev->dev); + r = pm_runtime_put_sync(&dsi->pdev->dev); WARN_ON(r < 0); } diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c index 17033457ee89..77c2b5a32b5d 100644 --- a/drivers/video/omap2/dss/dss.c +++ b/drivers/video/omap2/dss/dss.c @@ -720,7 +720,7 @@ void dss_runtime_put(void) DSSDBG("dss_runtime_put\n"); - r = pm_runtime_put(&dss.pdev->dev); + r = pm_runtime_put_sync(&dss.pdev->dev); WARN_ON(r < 0); } diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c index b4c270edb915..c39f9c3a92cf 100644 --- a/drivers/video/omap2/dss/hdmi.c +++ b/drivers/video/omap2/dss/hdmi.c @@ -176,7 +176,7 @@ static void hdmi_runtime_put(void) DSSDBG("hdmi_runtime_put\n"); - r = pm_runtime_put(&hdmi.pdev->dev); + r = pm_runtime_put_sync(&hdmi.pdev->dev); WARN_ON(r < 0); } diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c index 814bb9500dca..55f398014f33 100644 --- a/drivers/video/omap2/dss/rfbi.c +++ b/drivers/video/omap2/dss/rfbi.c @@ -140,7 +140,7 @@ static void rfbi_runtime_put(void) DSSDBG("rfbi_runtime_put\n"); - r = pm_runtime_put(&rfbi.pdev->dev); + r = pm_runtime_put_sync(&rfbi.pdev->dev); WARN_ON(r < 0); } diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c index b3e9f9091581..5c3d0f901510 100644 --- a/drivers/video/omap2/dss/venc.c +++ b/drivers/video/omap2/dss/venc.c @@ -401,7 +401,7 @@ static void venc_runtime_put(void) DSSDBG("venc_runtime_put\n"); - r = pm_runtime_put(&venc.pdev->dev); + r = pm_runtime_put_sync(&venc.pdev->dev); WARN_ON(r < 0); } -- cgit v1.2.1 From 575753e3bea3b67eef8e454fb87f719e3f7da599 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 Jan 2012 11:04:53 +0200 Subject: OMAP: 4430SDP/Panda: use gpio_free_array to free HDMI gpios Instead of freeing the GPIOs individually, use gpio_free_array(). Signed-off-by: Tomi Valkeinen Acked-by: Tony Lindgren --- arch/arm/mach-omap2/board-4430sdp.c | 3 +-- arch/arm/mach-omap2/board-omap4panda.c | 3 +-- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index e1fe304ce361..7bbe23ee3e35 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -614,8 +614,7 @@ static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev) static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev) { - gpio_free(HDMI_GPIO_LS_OE); - gpio_free(HDMI_GPIO_HPD); + gpio_free_array(sdp4430_hdmi_gpios, ARRAY_SIZE(sdp4430_hdmi_gpios)); } static struct nokia_dsi_panel_data dsi1_panel = { diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 3e1c507fb01f..aeb9e88e0a2a 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -497,8 +497,7 @@ static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev) static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev) { - gpio_free(HDMI_GPIO_LS_OE); - gpio_free(HDMI_GPIO_HPD); + gpio_free_array(panda_hdmi_gpios, ARRAY_SIZE(panda_hdmi_gpios)); } static struct omap_dss_device omap4_panda_hdmi_device = { -- cgit v1.2.1 From 3932a32fcf5393f8be70ac99dc718ad7ad0a415b Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 Jan 2012 10:49:38 +0200 Subject: OMAP: 4430SDP/Panda: rename HPD GPIO to CT_CP_HPD The GPIO 60 on 4430sdp and Panda is not HPD GPIO, as currently marked in the board files, but CT_CP_HPD, which is used to enable/disable HPD functionality. This patch renames the GPIO. Signed-off-by: Tomi Valkeinen Acked-by: Tony Lindgren --- arch/arm/mach-omap2/board-4430sdp.c | 4 ++-- arch/arm/mach-omap2/board-omap4panda.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 7bbe23ee3e35..02a4d5f3e8c8 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -52,7 +52,7 @@ #define ETH_KS8851_QUART 138 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184 #define OMAP4_SFH7741_ENABLE_GPIO 188 -#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */ +#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ #define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */ #define DLP_POWER_ON_GPIO 40 @@ -596,7 +596,7 @@ static void __init omap_sfh7741prox_init(void) } static struct gpio sdp4430_hdmi_gpios[] = { - { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, + { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, }; diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index aeb9e88e0a2a..844e285b40a3 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -51,7 +51,7 @@ #define GPIO_HUB_NRESET 62 #define GPIO_WIFI_PMENA 43 #define GPIO_WIFI_IRQ 53 -#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */ +#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ /* wl127x BT, FM, GPS connectivity chip */ @@ -479,7 +479,7 @@ int __init omap4_panda_dvi_init(void) } static struct gpio panda_hdmi_gpios[] = { - { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, + { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, }; -- cgit v1.2.1 From 7bb122d155f742fe2d79849090c825be7b4a247e Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 Jan 2012 10:59:00 +0200 Subject: OMAPDSS: remove wrong HDMI HPD muxing "hdmi_hpd" pin is muxed to INPUT and PULLUP, but the pin is not currently used, and in the future when it is used, the pin is used as a GPIO and is board specific, not an OMAP4 wide thing. So remove the muxing for now. Signed-off-by: Tomi Valkeinen Acked-by: Tony Lindgren --- arch/arm/mach-omap2/display.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index ffd9bd983023..d6e65e29d83d 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -102,12 +102,8 @@ static void omap4_hdmi_mux_pads(enum omap_hdmi_flags flags) u32 reg; u16 control_i2c_1; - /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */ - omap_mux_init_signal("hdmi_hpd", - OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hdmi_cec", OMAP_PIN_INPUT_PULLUP); - /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */ omap_mux_init_signal("hdmi_ddc_scl", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hdmi_ddc_sda", -- cgit v1.2.1 From 78a1ad8f12db70b8b0a4548b90704de08ee216ce Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 Jan 2012 11:02:36 +0200 Subject: OMAP: 4430SDP/Panda: setup HDMI GPIO muxes The HDMI GPIO pins LS_OE and CT_CP_HPD are not currently configured. This patch configures them as output pins. Signed-off-by: Tomi Valkeinen Acked-by: Tony Lindgren --- arch/arm/mach-omap2/board-4430sdp.c | 3 +++ arch/arm/mach-omap2/board-omap4panda.c | 3 +++ 2 files changed, 6 insertions(+) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 02a4d5f3e8c8..95766cdfc57f 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -821,6 +821,9 @@ static void omap_4430sdp_display_init(void) omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); else omap_hdmi_init(0); + + omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); } #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 844e285b40a3..982397269360 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -538,6 +538,9 @@ void omap4_panda_display_init(void) omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); else omap_hdmi_init(0); + + omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); } static void __init omap4_panda_init(void) -- cgit v1.2.1 From aa74274b464d4aa24703963ac89a0ee942d5d267 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 Jan 2012 11:05:32 +0200 Subject: OMAP: 4430SDP/Panda: add HDMI HPD gpio Both Panda and 4430SDP use GPIO 63 as HDMI hot-plug-detect. Configure this GPIO in the board files. Signed-off-by: Tomi Valkeinen Acked-by: Tony Lindgren --- arch/arm/mach-omap2/board-4430sdp.c | 3 +++ arch/arm/mach-omap2/board-omap4panda.c | 3 +++ 2 files changed, 6 insertions(+) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 95766cdfc57f..cd6ec517a929 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -54,6 +54,7 @@ #define OMAP4_SFH7741_ENABLE_GPIO 188 #define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ +#define HDMI_GPIO_HPD 63 /* Hotplug detect */ #define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */ #define DLP_POWER_ON_GPIO 40 @@ -598,6 +599,7 @@ static void __init omap_sfh7741prox_init(void) static struct gpio sdp4430_hdmi_gpios[] = { { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, + { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" }, }; static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev) @@ -824,6 +826,7 @@ static void omap_4430sdp_display_init(void) omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); } #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 982397269360..e1b196361f95 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -53,6 +53,7 @@ #define GPIO_WIFI_IRQ 53 #define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ +#define HDMI_GPIO_HPD 63 /* Hotplug detect */ /* wl127x BT, FM, GPS connectivity chip */ static int wl1271_gpios[] = {46, -1, -1}; @@ -481,6 +482,7 @@ int __init omap4_panda_dvi_init(void) static struct gpio panda_hdmi_gpios[] = { { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, + { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" }, }; static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev) @@ -541,6 +543,7 @@ void omap4_panda_display_init(void) omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); } static void __init omap4_panda_init(void) -- cgit v1.2.1 From c49d005b6cc8491fad5b24f82805be2d6bcbd3dd Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 Jan 2012 11:09:57 +0200 Subject: OMAPDSS: HDMI: PHY burnout fix A hardware bug in the OMAP4 HDMI PHY causes physical damage to the board if the HDMI PHY is kept powered on when the cable is not connected. This patch solves the problem by adding hot-plug-detection into the HDMI IP driver. This is not a real HPD support in the sense that nobody else than the IP driver gets to know about the HPD events, but is only meant to fix the HW bug. The strategy is simple: If the display device is turned off by the user, the PHY power is set to OFF. When the display device is turned on by the user, the PHY power is set either to LDOON or TXON, depending on whether the HDMI cable is connected. The reason to avoid PHY OFF when the display device is on, but the cable is disconnected, is that when the PHY is turned OFF, the HDMI IP is not "ticking" and thus the DISPC does not receive pixel clock from the HDMI IP. This would, for example, prevent any VSYNCs from happening, and would thus affect the users of omapdss. By using LDOON when the cable is disconnected we'll avoid the HW bug, but keep the HDMI working as usual from the user's point of view. Signed-off-by: Tomi Valkeinen --- arch/arm/mach-omap2/board-4430sdp.c | 5 +++ arch/arm/mach-omap2/board-omap4panda.c | 5 +++ drivers/video/omap2/dss/hdmi.c | 3 ++ drivers/video/omap2/dss/ti_hdmi.h | 4 ++ drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 68 +++++++++++++++++++++++++++++-- include/video/omapdss.h | 5 +++ 6 files changed, 86 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index cd6ec517a929..0ce758edaad2 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -732,6 +732,10 @@ static void sdp4430_lcd_init(void) pr_err("%s: Could not get lcd2_reset_gpio\n", __func__); } +static struct omap_dss_hdmi_data sdp4430_hdmi_data = { + .hpd_gpio = HDMI_GPIO_HPD, +}; + static struct omap_dss_device sdp4430_hdmi_device = { .name = "hdmi", .driver_name = "hdmi_panel", @@ -739,6 +743,7 @@ static struct omap_dss_device sdp4430_hdmi_device = { .platform_enable = sdp4430_panel_enable_hdmi, .platform_disable = sdp4430_panel_disable_hdmi, .channel = OMAP_DSS_CHANNEL_DIGIT, + .data = &sdp4430_hdmi_data, }; static struct picodlp_panel_data sdp4430_picodlp_pdata = { diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index e1b196361f95..370c4b428888 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -502,6 +502,10 @@ static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev) gpio_free_array(panda_hdmi_gpios, ARRAY_SIZE(panda_hdmi_gpios)); } +static struct omap_dss_hdmi_data omap4_panda_hdmi_data = { + .hpd_gpio = HDMI_GPIO_HPD, +}; + static struct omap_dss_device omap4_panda_hdmi_device = { .name = "hdmi", .driver_name = "hdmi_panel", @@ -509,6 +513,7 @@ static struct omap_dss_device omap4_panda_hdmi_device = { .platform_enable = omap4_panda_panel_enable_hdmi, .platform_disable = omap4_panda_panel_disable_hdmi, .channel = OMAP_DSS_CHANNEL_DIGIT, + .data = &omap4_panda_hdmi_data, }; static struct omap_dss_device *omap4_panda_dss_devices[] = { diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c index c39f9c3a92cf..d7aa3b056529 100644 --- a/drivers/video/omap2/dss/hdmi.c +++ b/drivers/video/omap2/dss/hdmi.c @@ -497,6 +497,7 @@ bool omapdss_hdmi_detect(void) int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev) { + struct omap_dss_hdmi_data *priv = dssdev->data; int r = 0; DSSDBG("ENTER hdmi_display_enable\n"); @@ -509,6 +510,8 @@ int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev) goto err0; } + hdmi.ip_data.hpd_gpio = priv->hpd_gpio; + r = omap_dss_start_device(dssdev); if (r) { DSSERR("failed to start device\n"); diff --git a/drivers/video/omap2/dss/ti_hdmi.h b/drivers/video/omap2/dss/ti_hdmi.h index 7503f7f619a7..50dadba5070a 100644 --- a/drivers/video/omap2/dss/ti_hdmi.h +++ b/drivers/video/omap2/dss/ti_hdmi.h @@ -126,6 +126,10 @@ struct hdmi_ip_data { const struct ti_hdmi_ip_ops *ops; struct hdmi_config cfg; struct hdmi_pll_info pll_data; + + /* ti_hdmi_4xxx_ip private data. These should be in a separate struct */ + int hpd_gpio; + bool phy_tx_enabled; }; int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data); void ti_hdmi_4xxx_phy_disable(struct hdmi_ip_data *ip_data); diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c index 9af81f18f163..2d72334ca3da 100644 --- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c +++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c @@ -28,6 +28,7 @@ #include #include #include +#include #include "ti_hdmi_4xxx_ip.h" #include "dss.h" @@ -223,6 +224,49 @@ void ti_hdmi_4xxx_pll_disable(struct hdmi_ip_data *ip_data) hdmi_set_pll_pwr(ip_data, HDMI_PLLPWRCMD_ALLOFF); } +static int hdmi_check_hpd_state(struct hdmi_ip_data *ip_data) +{ + unsigned long flags; + bool hpd; + int r; + /* this should be in ti_hdmi_4xxx_ip private data */ + static DEFINE_SPINLOCK(phy_tx_lock); + + spin_lock_irqsave(&phy_tx_lock, flags); + + hpd = gpio_get_value(ip_data->hpd_gpio); + + if (hpd == ip_data->phy_tx_enabled) { + spin_unlock_irqrestore(&phy_tx_lock, flags); + return 0; + } + + if (hpd) + r = hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_TXON); + else + r = hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_LDOON); + + if (r) { + DSSERR("Failed to %s PHY TX power\n", + hpd ? "enable" : "disable"); + goto err; + } + + ip_data->phy_tx_enabled = hpd; +err: + spin_unlock_irqrestore(&phy_tx_lock, flags); + return r; +} + +static irqreturn_t hpd_irq_handler(int irq, void *data) +{ + struct hdmi_ip_data *ip_data = data; + + hdmi_check_hpd_state(ip_data); + + return IRQ_HANDLED; +} + int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data) { u16 r = 0; @@ -232,10 +276,6 @@ int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data) if (r) return r; - r = hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_TXON); - if (r) - return r; - /* * Read address 0 in order to get the SCP reset done completed * Dummy access performed to make sure reset is done @@ -257,12 +297,32 @@ int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data) /* Write to phy address 3 to change the polarity control */ REG_FLD_MOD(phy_base, HDMI_TXPHY_PAD_CFG_CTRL, 0x1, 27, 27); + r = request_threaded_irq(gpio_to_irq(ip_data->hpd_gpio), + NULL, hpd_irq_handler, + IRQF_DISABLED | IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, "hpd", ip_data); + if (r) { + DSSERR("HPD IRQ request failed\n"); + hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_OFF); + return r; + } + + r = hdmi_check_hpd_state(ip_data); + if (r) { + free_irq(gpio_to_irq(ip_data->hpd_gpio), ip_data); + hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_OFF); + return r; + } + return 0; } void ti_hdmi_4xxx_phy_disable(struct hdmi_ip_data *ip_data) { + free_irq(gpio_to_irq(ip_data->hpd_gpio), ip_data); + hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_OFF); + ip_data->phy_tx_enabled = false; } static int hdmi_core_ddc_init(struct hdmi_ip_data *ip_data) diff --git a/include/video/omapdss.h b/include/video/omapdss.h index 062b3b24ff10..483f67caa7ad 100644 --- a/include/video/omapdss.h +++ b/include/video/omapdss.h @@ -590,6 +590,11 @@ struct omap_dss_device { int (*get_backlight)(struct omap_dss_device *dssdev); }; +struct omap_dss_hdmi_data +{ + int hpd_gpio; +}; + struct omap_dss_driver { struct device_driver driver; -- cgit v1.2.1 From 77231abe55433aa17eca712718745275853fa66d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 20 Jan 2012 12:19:43 +0000 Subject: ASoC: wm_hubs: Enable line out VMID buffer for single ended line outputs For optimal performance the single ended line outputs require that the line output VMID buffer be enabled. Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm_hubs.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c index 2a61094075f8..9ccc416d8cbc 100644 --- a/sound/soc/codecs/wm_hubs.c +++ b/sound/soc/codecs/wm_hubs.c @@ -613,6 +613,8 @@ SND_SOC_DAPM_INPUT("IN2RP:VXRP"), SND_SOC_DAPM_SUPPLY("MICBIAS2", WM8993_POWER_MANAGEMENT_1, 5, 0, NULL, 0), SND_SOC_DAPM_SUPPLY("MICBIAS1", WM8993_POWER_MANAGEMENT_1, 4, 0, NULL, 0), +SND_SOC_DAPM_SUPPLY("LINEOUT_VMID_BUF", WM8993_ANTIPOP1, 7, 0, NULL, 0), + SND_SOC_DAPM_MIXER("IN1L PGA", WM8993_POWER_MANAGEMENT_2, 6, 0, in1l_pga, ARRAY_SIZE(in1l_pga)), SND_SOC_DAPM_MIXER("IN1R PGA", WM8993_POWER_MANAGEMENT_2, 4, 0, @@ -834,9 +836,11 @@ static const struct snd_soc_dapm_route lineout1_diff_routes[] = { }; static const struct snd_soc_dapm_route lineout1_se_routes[] = { + { "LINEOUT1N Mixer", NULL, "LINEOUT_VMID_BUF" }, { "LINEOUT1N Mixer", "Left Output Switch", "Left Output PGA" }, { "LINEOUT1N Mixer", "Right Output Switch", "Right Output PGA" }, + { "LINEOUT1P Mixer", NULL, "LINEOUT_VMID_BUF" }, { "LINEOUT1P Mixer", "Left Output Switch", "Left Output PGA" }, { "LINEOUT1N Driver", NULL, "LINEOUT1N Mixer" }, @@ -853,9 +857,11 @@ static const struct snd_soc_dapm_route lineout2_diff_routes[] = { }; static const struct snd_soc_dapm_route lineout2_se_routes[] = { + { "LINEOUT2N Mixer", NULL, "LINEOUT_VMID_BUF" }, { "LINEOUT2N Mixer", "Left Output Switch", "Left Output PGA" }, { "LINEOUT2N Mixer", "Right Output Switch", "Right Output PGA" }, + { "LINEOUT2P Mixer", NULL, "LINEOUT_VMID_BUF" }, { "LINEOUT2P Mixer", "Right Output Switch", "Right Output PGA" }, { "LINEOUT2N Driver", NULL, "LINEOUT2N Mixer" }, -- cgit v1.2.1 From 8791d63af0cf113725ae4cb8cba9492814c59a93 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Thu, 26 Jan 2012 12:04:11 -0300 Subject: [media] imon: don't wedge hardware after early callbacks This patch is just a minor update to one titled "imon: Input from ffdc device type ignored" from Corinna Vinschen. An earlier patch to prevent an oops when we got early callbacks also has the nasty side-effect of wedging imon hardware, as we don't acknowledge the urb. Rework the check slightly here to bypass processing the packet, as the driver isn't yet fully initialized, but still acknowlege the urb and submit a new rx_urb. Do this for both interfaces -- irrelevant for ffdc hardware, but relevant for newer hardware, though newer hardware doesn't spew the constant stream of data as soon as the hardware is initialized like the older ffdc devices, so they'd be less likely to trigger this anyway... Tested with both an ffdc device and an 0042 device. Reported-by: Corinna Vinschen Signed-off-by: Jarod Wilson CC: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/imon.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index 6ed96465137a..3f175ebe2766 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -47,7 +47,7 @@ #define MOD_AUTHOR "Jarod Wilson " #define MOD_DESC "Driver for SoundGraph iMON MultiMedia IR/Display" #define MOD_NAME "imon" -#define MOD_VERSION "0.9.3" +#define MOD_VERSION "0.9.4" #define DISPLAY_MINOR_BASE 144 #define DEVICE_NAME "lcd%d" @@ -1658,9 +1658,17 @@ static void usb_rx_callback_intf0(struct urb *urb) return; ictx = (struct imon_context *)urb->context; - if (!ictx || !ictx->dev_present_intf0) + if (!ictx) return; + /* + * if we get a callback before we're done configuring the hardware, we + * can't yet process the data, as there's nowhere to send it, but we + * still need to submit a new rx URB to avoid wedging the hardware + */ + if (!ictx->dev_present_intf0) + goto out; + switch (urb->status) { case -ENOENT: /* usbcore unlink successful! */ return; @@ -1678,6 +1686,7 @@ static void usb_rx_callback_intf0(struct urb *urb) break; } +out: usb_submit_urb(ictx->rx_urb_intf0, GFP_ATOMIC); } @@ -1690,9 +1699,17 @@ static void usb_rx_callback_intf1(struct urb *urb) return; ictx = (struct imon_context *)urb->context; - if (!ictx || !ictx->dev_present_intf1) + if (!ictx) return; + /* + * if we get a callback before we're done configuring the hardware, we + * can't yet process the data, as there's nowhere to send it, but we + * still need to submit a new rx URB to avoid wedging the hardware + */ + if (!ictx->dev_present_intf1) + goto out; + switch (urb->status) { case -ENOENT: /* usbcore unlink successful! */ return; @@ -1710,6 +1727,7 @@ static void usb_rx_callback_intf1(struct urb *urb) break; } +out: usb_submit_urb(ictx->rx_urb_intf1, GFP_ATOMIC); } @@ -2242,7 +2260,7 @@ find_endpoint_failed: mutex_unlock(&ictx->lock); usb_free_urb(rx_urb); rx_urb_alloc_failed: - dev_err(ictx->dev, "unable to initialize intf0, err %d\n", ret); + dev_err(ictx->dev, "unable to initialize intf1, err %d\n", ret); return NULL; } -- cgit v1.2.1 From dbc3982ae286e934e71f0b44e78d14844a9ca83b Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Mon, 23 Jan 2012 12:18:14 +0530 Subject: ARM: OMAP2+: timer: Fix crash due to wrong arg to __omap_dm_timer_read_counter Commit 2f0778af (ARM: 7205/2: sched_clock: allow sched_clock to be selected at runtime) had a typo for the case when CONFIG_OMAP_32K_TIMER is not set. In dmtimer_read_sched_clock(), wrong argument was getting passed to __omap_dm_timer_read_counter() function call; instead of "&clksrc", we were passing "clksrc.io_base", which results into kernel crash. To reproduce kernel crash, just disable the CONFIG_OMAP_32K_TIMER config option (and DEBUG_LL) and build/boot the kernel. This will use dmtimer as a kernel clocksource and lead to kernel crash during boot - [ 0.000000] OMAP clocksource: GPTIMER2 at 26000000 Hz [ 0.000000] sched_clock: 32 bits at 26MHz, resolution 38ns, wraps every 165191ms [ 0.000000] Unable to handle kernel paging request at virtual address 00030ef1 [ 0.000000] pgd = c0004000 [ 0.000000] [00030ef1] *pgd=00000000 [ 0.000000] Internal error: Oops: 5 [#1] SMP [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 Not tainted (3.3.0-rc1-11574-g0c76665-dirty #3) [ 0.000000] PC is at dmtimer_read_sched_clock+0x18/0x4c [ 0.000000] LR is at update_sched_clock+0x10/0x84 [ 0.000000] pc : [] lr : [] psr: 200001d3 [ 0.000000] sp : c0641f38 ip : c0641e18 fp : 0000000a [ 0.000000] r10: 151c3303 r9 : 00000026 r8 : 76276259 [ 0.000000] r7 : 00028547 r6 : c065ac80 r5 : 431bde82 r4 : c0655968 [ 0.000000] r3 : 00030ef1 r2 : fb032000 r1 : 00000028 r0 : 00000001 Signed-off-by: Vaibhav Hiremath [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/timer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 6eeff0e0ae01..5c9acea95761 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -270,7 +270,7 @@ static struct clocksource clocksource_gpt = { static u32 notrace dmtimer_read_sched_clock(void) { if (clksrc.reserved) - return __omap_dm_timer_read_counter(clksrc.io_base, 1); + return __omap_dm_timer_read_counter(&clksrc, 1); return 0; } -- cgit v1.2.1 From 8ef5d844cc3a644ea6f7665932a4307e9fad01fa Mon Sep 17 00:00:00 2001 From: Yegor Yefremov Date: Mon, 23 Jan 2012 08:32:23 +0100 Subject: ARM: OMAP2+: GPMC: fix device size setup following statement can only change device size from 8-bit(0) to 16-bit(1), but not vice versa: regval |= GPMC_CONFIG1_DEVICESIZE(wval); so as this field has 1 reserved bit, that could be used in future, just clear both bits and then OR with the desired value Signed-off-by: Yegor Yefremov Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 130034bf01d5..dfffbbf4c009 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -528,7 +528,13 @@ int gpmc_cs_configure(int cs, int cmd, int wval) case GPMC_CONFIG_DEV_SIZE: regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + + /* clear 2 target bits */ + regval &= ~GPMC_CONFIG1_DEVICESIZE(3); + + /* set the proper value */ regval |= GPMC_CONFIG1_DEVICESIZE(wval); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval); break; -- cgit v1.2.1 From ffa1e4ede453cf92cfcd9f96f9140c21aeb319f7 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sun, 18 Dec 2011 02:35:47 +0200 Subject: ARM: OMAP: fix erroneous mmc2 clock change on mmc3 setup hsmmc23_before_set_reg() can set MMCSDIO2ADPCLKISEL bit, which enables internal clock for MMC2. Currently this function is also called by code handling MMC3, and if .internal_clock is set in platform data (by default it currently is), it will set MMCSDIO2ADPCLKISEL for MMC2 instead of MMC3 (MMC3 doesn't have such bit so nothing actually needs to be done). This breaks 2nd SD slot on pandora. Fix this by changing hsmmc23_before_set_reg() to only handle MMC2. Note that this removes .remux() call for MMC3, but no board currently needs it and it's also not called for MMC4 and MMC5. Signed-off-by: Grazvydas Ignotas Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/hsmmc.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index bd844af13af5..8658bd77763c 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -182,7 +182,7 @@ static void hsmmc2_select_input_clk_src(struct omap_mmc_platform_data *mmc) } } -static void hsmmc23_before_set_reg(struct device *dev, int slot, +static void hsmmc2_before_set_reg(struct device *dev, int slot, int power_on, int vdd) { struct omap_mmc_platform_data *mmc = dev->platform_data; @@ -407,14 +407,13 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, c->caps &= ~MMC_CAP_8_BIT_DATA; c->caps |= MMC_CAP_4_BIT_DATA; } - /* FALLTHROUGH */ - case 3: if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { /* off-chip level shifting, or none */ - mmc->slots[0].before_set_reg = hsmmc23_before_set_reg; + mmc->slots[0].before_set_reg = hsmmc2_before_set_reg; mmc->slots[0].after_set_reg = NULL; } break; + case 3: case 4: case 5: mmc->slots[0].before_set_reg = NULL; -- cgit v1.2.1 From d82e5190da9057e31d6f0fe5771dfbe55ff9125f Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Thu, 12 Jan 2012 16:26:45 +0200 Subject: ARM: OMAP: fix MMC2 loopback clock handling Currently MMC2 setup code can only enable loopback clock and relies on reset value for boards that need to have it disabled. This causes a problem with certain bootloaders that always enable that clock, resulting with unwanted bootloader dependencies. Fix this by making it disable the clock if board data says so. Signed-off-by: Grazvydas Ignotas Acked-by: Igor Grinberg Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/hsmmc.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 8658bd77763c..ad0adb5a1e0e 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -175,11 +175,12 @@ static void hsmmc2_select_input_clk_src(struct omap_mmc_platform_data *mmc) { u32 reg; - if (mmc->slots[0].internal_clock) { - reg = omap_ctrl_readl(control_devconf1_offset); + reg = omap_ctrl_readl(control_devconf1_offset); + if (mmc->slots[0].internal_clock) reg |= OMAP2_MMCSDIO2ADPCLKISEL; - omap_ctrl_writel(reg, control_devconf1_offset); - } + else + reg &= ~OMAP2_MMCSDIO2ADPCLKISEL; + omap_ctrl_writel(reg, control_devconf1_offset); } static void hsmmc2_before_set_reg(struct device *dev, int slot, -- cgit v1.2.1 From e0feca899c9785316ec67954f1a8e84102eaaca7 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Fri, 23 Dec 2011 18:39:31 +0100 Subject: ARM: OMAP2+: arch/arm/mach-omap2/devices.c: introduce missing kfree pdata needs to be freed before leaving the function in an error case. A simplified version of the semantic match that finds the problem is as follows: (http://coccinelle.lip6.fr) // @r exists@ local idexpression x; statement S; identifier f1; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } x->f1 ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // Signed-off-by: Julia Lawall Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/devices.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 0b510ad01a00..283d11eae693 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -405,6 +405,7 @@ static int omap_mcspi_init(struct omap_hwmod *oh, void *unused) break; default: pr_err("Invalid McSPI Revision value\n"); + kfree(pdata); return -EINVAL; } -- cgit v1.2.1 From 14ea960164ecb25f7617eba33e7c7f9163e93e7c Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 12 Jan 2012 10:55:17 +0100 Subject: ARM: OMAP2+: arch/arm/mach-omap2/smartreflex.c: add missing iounmap Add missing iounmap in error handling code, in a case where the function already preforms iounmap on some other execution path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression e; statement S,S1; int ret; @@ e = \(ioremap\|ioremap_nocache\)(...) ... when != iounmap(e) if (<+...e...+>) S ... when any when != iounmap(e) *if (...) { ... when != iounmap(e) return ...; } ... when any iounmap(e); // Signed-off-by: Julia Lawall Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/smartreflex.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 9dd93453e563..7e755bb0ffc4 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -897,7 +897,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) ret = sr_late_init(sr_info); if (ret) { pr_warning("%s: Error in SR late init\n", __func__); - return ret; + goto err_iounmap; } } -- cgit v1.2.1 From b7c9705cb799adabc0ae430943843e6c6e82617d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 27 Jan 2012 14:41:20 +0900 Subject: ARM: S3C64XX: Make s3c64xx_init_uarts() static Now that it's in common.c it's not used in multiple source files. Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c index 4a7394d4bd9e..bee7dcd4df7c 100644 --- a/arch/arm/mach-s3c64xx/common.c +++ b/arch/arm/mach-s3c64xx/common.c @@ -49,7 +49,7 @@ /* uart registration process */ -void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) +static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) { s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no); } -- cgit v1.2.1 From 5d3a21990c58b68a31dcbf4c378231781c53bfc1 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 27 Jan 2012 14:43:44 +0900 Subject: ARM: S3C6410: Use device names for both I2C clocks When the S3C64xx CPUs were converted to clkdev mappings were added for the I2C controllers on them. On S3C6410 a device name is specified for I2C controller 1 but not for controller 0 which makes the code less robust as we'll falsely return the clock for controller 0 if there's an error in the request for controller 1. Improve things by registering a device name for controller 0 as well. Due to the fact that we change the numbering for controller 0 depending on if we've registered controller 1 this requires an ifdef to choose the name. Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/clock.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index 31bb27dc4aeb..aebbcc291b4e 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -138,6 +138,11 @@ static struct clk init_clocks_off[] = { .ctrlbit = S3C_CLKCON_PCLK_TSADC, }, { .name = "i2c", +#ifdef CONFIG_S3C_DEV_I2C1 + .devname = "s3c2440-i2c.0", +#else + .devname = "s3c2440-i2c", +#endif .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_IIC, -- cgit v1.2.1 From 556ef3e474dd87d627655dafdf1e7eaf4747e388 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Fri, 27 Jan 2012 14:47:45 +0900 Subject: ARM: EXYNOS: fix non-SMP builds for EXYNOS4 This patch fixes the following build issue, which happens only if SMP has been disabled: arch/arm/mach-exynos/built-in.o: In function `exynos4_pm_resume': arch/arm/mach-exynos/pm.c:387: undefined reference to `scu_enable' Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/pm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index a4f61a43c7ba..2521b23553eb 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -384,7 +384,9 @@ static void exynos4_pm_resume(void) exynos4_restore_pll(); +#ifdef CONFIG_SMP scu_enable(S5P_VA_SCU); +#endif #ifdef CONFIG_CACHE_L2X0 s3c_pm_do_restore_core(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save)); -- cgit v1.2.1 From 693cec9755e5198e0c291a4bfea6ebb1c7054550 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 27 Jan 2012 14:51:21 +0900 Subject: ARM: SAMSUNG: Fix platform data setup for I2C adapter 0 The common static default_i2c_data structure gets bus_num set by each s3c_i2c?_set_platdata() call, except for s3c_i2c0_set_platdata(). Thus if for instance s3c_i2c1_set_platdata() is called prior to s3c_i2c0_set_platdata() the I2C0 controller has bus_num set to wrong value of 1, i.e. the one from previous set_platdata call. Fix this by also setting bus_num for I2C0. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/devs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 32a6e394db24..f10768e988d4 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -468,8 +468,10 @@ void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd) { struct s3c2410_platform_i2c *npd; - if (!pd) + if (!pd) { pd = &default_i2c_data; + pd->bus_num = 0; + } npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), &s3c_device_i2c0); -- cgit v1.2.1 From 7cdf04d7d4c0b5b205817ceb7a21c6e07d09ce11 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Fri, 27 Jan 2012 14:56:17 +0900 Subject: ARM: EXYNOS: Remove build warning without enabling PM Fixed following build warning with exynos4_defconfig. arch/arm/mach-exynos/clock.c:33: warning: 'exynos4_clock_save' defined but not used arch/arm/mach-exynos/clock-exynos4210.c:35: warning: 'exynos4210_clock_save' defined but not used arch/arm/mach-exynos/clock-exynos4212.c:35: warning: 'exynos4212_clock_save' defined but not used Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/clock-exynos4210.c | 2 ++ arch/arm/mach-exynos/clock-exynos4212.c | 2 ++ arch/arm/mach-exynos/clock.c | 2 ++ 3 files changed, 6 insertions(+) diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c index a5823a7f249e..13312ccb2d93 100644 --- a/arch/arm/mach-exynos/clock-exynos4210.c +++ b/arch/arm/mach-exynos/clock-exynos4210.c @@ -32,6 +32,7 @@ #include "common.h" +#ifdef CONFIG_PM_SLEEP static struct sleep_save exynos4210_clock_save[] = { SAVE_ITEM(S5P_CLKSRC_IMAGE), SAVE_ITEM(S5P_CLKSRC_LCD1), @@ -42,6 +43,7 @@ static struct sleep_save exynos4210_clock_save[] = { SAVE_ITEM(S5P_CLKGATE_IP_LCD1), SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210), }; +#endif static struct clksrc_clk *sysclks[] = { /* nothing here yet */ diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c index 26a668b0d101..48af28566fa1 100644 --- a/arch/arm/mach-exynos/clock-exynos4212.c +++ b/arch/arm/mach-exynos/clock-exynos4212.c @@ -32,12 +32,14 @@ #include "common.h" +#ifdef CONFIG_PM_SLEEP static struct sleep_save exynos4212_clock_save[] = { SAVE_ITEM(S5P_CLKSRC_IMAGE), SAVE_ITEM(S5P_CLKDIV_IMAGE), SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212), SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212), }; +#endif static struct clk *clk_src_mpll_user_list[] = { [0] = &clk_fin_mpll, diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c index 5a8c42e90005..187287aa57ab 100644 --- a/arch/arm/mach-exynos/clock.c +++ b/arch/arm/mach-exynos/clock.c @@ -30,6 +30,7 @@ #include "common.h" +#ifdef CONFIG_PM_SLEEP static struct sleep_save exynos4_clock_save[] = { SAVE_ITEM(S5P_CLKDIV_LEFTBUS), SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS), @@ -93,6 +94,7 @@ static struct sleep_save exynos4_clock_save[] = { SAVE_ITEM(S5P_CLKGATE_SCLKCPU), SAVE_ITEM(S5P_CLKGATE_IP_CPU), }; +#endif struct clk clk_sclk_hdmi27m = { .name = "sclk_hdmi27m", -- cgit v1.2.1 From a1ad803322a904a250fa901020b4a4dfaf51a829 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 25 Jan 2012 22:07:05 +0100 Subject: sh: se7724: fix compile breakage Fix compilation breakage arch/sh/boards/mach-se/7724/setup.c:182: error: 'V4L2_PIX_FMT_RGB565' undeclared here (not in a function) make[3]: *** [arch/sh/boards/mach-se/7724/setup.o] Error 1 caused by commit "fbdev: sh_mobile_lcdc: Support FOURCC-based format API" Also add other missing headers, even if compilation currently succeeds because of their indirect inclusion via other headers. Signed-off-by: Guennadi Liakhovetski Acked-by: Laurent Pinchart Signed-off-by: Paul Mundt --- arch/sh/boards/mach-ap325rxa/setup.c | 1 + arch/sh/boards/mach-ecovec24/setup.c | 2 ++ arch/sh/boards/mach-kfr2r09/setup.c | 1 + arch/sh/boards/mach-migor/setup.c | 2 ++ arch/sh/boards/mach-se/7724/setup.c | 1 + 5 files changed, 7 insertions(+) diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c index 6418e95c2b6b..ebd0f818a25f 100644 --- a/arch/sh/boards/mach-ap325rxa/setup.c +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 033ef2ba621f..cde7c0085ced 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -29,9 +29,11 @@ #include #include #include +#include #include