From 436f7ecdcc08f71ddc106b7bbe3bcbf1785f3bff Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 17 Jan 2014 21:24:45 +0800 Subject: net: stmmac: Deprecate snps, phy-addr and auto-detect PHY address The snps,phy-addr device tree property is non-standard, and should be removed in favor of proper phy node support. Remove it from the binding documents and warn if the property is still used. Most PHYs respond to address 0, but a few don't, so auto-detect PHY address by default, to make up for the lack of explicit address selection. Signed-off-by: Chen-Yu Tsai Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/stmmac.txt | 1 - drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 9 ++++++++- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt index d132513e8fac..aefb63949619 100644 --- a/Documentation/devicetree/bindings/net/stmmac.txt +++ b/Documentation/devicetree/bindings/net/stmmac.txt @@ -12,7 +12,6 @@ Required properties: property - phy-mode: String, operation mode of the PHY interface. Supported values are: "mii", "rmii", "gmii", "rgmii". -- snps,phy-addr phy address to connect to. - snps,reset-gpio gpio number for phy reset. - snps,reset-active-low boolean flag to indicate if phy reset is active low. - snps,reset-delays-us is triplet of delays diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 634260e7dd3b..82110f141d09 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -50,7 +50,14 @@ static int stmmac_probe_config_dt(struct platform_device *pdev, if (plat->bus_id < 0) plat->bus_id = 0; - of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr); + /* Default to phy auto-detection */ + plat->phy_addr = -1; + + /* "snps,phy-addr" is not a standard property. Mark it as deprecated + * and warn of its use. Remove this when phy node support is added. + */ + if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0) + dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n"); plat->mdio_bus_data = devm_kzalloc(&pdev->dev, sizeof(struct stmmac_mdio_bus_data), -- cgit v1.2.1