summaryrefslogtreecommitdiffstats
path: root/sound
Commit message (Collapse)AuthorAgeFilesLines
* Merge remote-tracking branch 'asoc/fix/dapm' into asoc-linusMark Brown2016-03-051-4/+4
|\
| * ASoC: dapm: Fix ctl value accesses in a wrong typeTakashi Iwai2016-03-011-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | snd_soc_dapm_dai_link_get() and _put() access the associated ctl values as value.integer.value[]. However, this is an enum ctl, and it has to be accessed via value.enumerated.item[]. The former is long while the latter is unsigned int, so they don't align. Fixes: c66150824b8a ('ASoC: dapm: add code to configure dai link parameters') Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
* | ALSA: hda - Loop interrupt handling until really clearedTakashi Iwai2016-02-262-22/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the interrupt handler of HD-audio driver assumes that no irq update is needed while processing the irq. But in reality, it has been confirmed that the HW irq is issued even during the irq handling. Since we clear the irq status at the beginning, process the interrupt, then exits from the handler, the lately issued interrupt is left untouched without being properly processed. This patch changes the interrupt handler code to loop over the check-and-process. The handler tries repeatedly as long as the IRQ status are turned on, and either stream or CORB/RIRB is handled. For checking the stream handling, snd_hdac_bus_handle_stream_irq() returns a value indicating the stream indices bits. Other than that, the change is only in the irq handler itself. Reported-by: Libin Yang <libin.yang@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Fix headset support and noise on HP EliteBook 755 G2Takashi Iwai2016-02-251-0/+8
| | | | | | | | | | | | | | | | | | | | | | HP EliteBook 755 G2 with ALC3228 (ALC280) codec [103c:221c] requires the known fixup (ALC269_FIXUP_HEADSET_MIC) for making the headset mic working. Also, it suffers from the loopback noise problem, so we should disable aamix path as well. Reported-by: Derick Eddington <derick.eddington@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Fixup speaker pass-through control for nid 0x14 on ALC225David Henningsson2016-02-251-2/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On one of the machines we enable, we found that the actual speaker volume did not always correspond to the volume set in alsamixer. This patch fixes that problem. This patch was orginally written by Kailang @ Realtek, I've rebased it to fit sound git master. Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/bugs/1549660 Co-Authored-By: Kailang <kailang@realtek.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Fixing background noise on Dell Inspiron 3162Kai-Heng Feng2016-02-251-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After login to the desktop on Dell Inspiron 3162, there's a very loud background noise comes from the builtin speaker. The noise does not go away even if the speaker is muted. The noise disappears after using the aamix fixup. Codec: Realtek ALC3234 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0255 Subsystem Id: 0x10280725 Revision Id: 0x100002 No Modem Function Group found BugLink: http://bugs.launchpad.net/bugs/1549620 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Apply clock gate workaround to Skylake, tooTakashi Iwai2016-02-221-9/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some Skylake machines show the codec probe errors in certain situations, e.g. HP Z240 desktop fails to probe the onboard Realtek codec at reloading the snd-hda-intel module like: snd_hda_intel 0000:00:1f.3: spurious response 0x200:0x2, last cmd=0x000000 snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to polling mode: lastcmd=0x000f0000 snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x000f0000 snd_hda_intel 0000:00:1f.3: Codec #0 probe error; disabling it... hdaudio hdaudioC0D2: no AFG or MFG node found snd_hda_intel 0000:00:1f.3: no codecs initialized Also, HP G470 G3 suffers from the similar problem, as reported in bugzilla below. On this machine, the codec probe error appears even at a fresh boot. As Libin suggested, the same workaround used for Broxton in the commit [6639484ddaf6: ALSA: hda - disable dynamic clock gating on Broxton before reset] can be applied for Skylake in order to fix this problem. The Intel HW team also confirmed that this is needed for SKL. This patch makes the workaround applied to both SKL and BXT platforms. The referred macros are moved and one superfluous macro (IS_BROXTON()) is another one (IS_BXT()) as well. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112731 Suggested-by: Libin Yang <libin.yang@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: pcm: Fix rwsem deadlock for non-atomic PCM streamTakashi Iwai2016-02-181-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A non-atomic PCM stream may take snd_pcm_link_rwsem rw semaphore twice in the same code path, e.g. one in snd_pcm_action_nonatomic() and another in snd_pcm_stream_lock(). Usually this is OK, but when a write lock is issued between these two read locks, the problem happens: the write lock is blocked due to the first reade lock, and the second read lock is also blocked by the write lock. This eventually deadlocks. The reason is the way rwsem manages waiters; it's queued like FIFO, so even if the writer itself doesn't take the lock yet, it blocks all the waiters (including reads) queued after it. As a workaround, in this patch, we replace the standard down_write() with an spinning loop. This is far from optimal, but it's good enough, as the spinning time is supposed to be relatively short for normal PCM operations, and the code paths requiring the write lock aren't called so often. Reported-by: Vinod Koul <vinod.koul@intel.com> Tested-by: Ramesh Babu <ramesh.babu@intel.com> Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: seq: Fix double port list deletionTakashi Iwai2016-02-161-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit [7f0973e973cd: ALSA: seq: Fix lockdep warnings due to double mutex locks] split the management of two linked lists (source and destination) into two individual calls for avoiding the AB/BA deadlock. However, this may leave the possible double deletion of one of two lists when the counterpart is being deleted concurrently. It ends up with a list corruption, as revealed by syzkaller fuzzer. This patch fixes it by checking the list emptiness and skipping the deletion and the following process. BugLink: http://lkml.kernel.org/r/CACT4Y+bay9qsrz6dQu31EcGaH9XwfW7o3oBzSQUG9fMszoh=Sg@mail.gmail.com Fixes: 7f0973e973cd ('ALSA: seq: Fix lockdep warnings due to 'double mutex locks) Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Cancel probe work instead of flush at removeTakashi Iwai2016-02-151-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit [991f86d7ae4e: ALSA: hda - Flush the pending probe work at remove] introduced the sync of async probe work at remove for fixing the race. However, this may lead to another hangup when the module removal is performed quickly before starting the probe work, because it issues flush_work() and it's blocked forever. The workaround is to use cancel_work_sync() instead of flush_work() there. Fixes: 991f86d7ae4e ('ALSA: hda - Flush the pending probe work at remove') Cc: <stable@vger.kernel.org> # v3.17+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: seq: Fix leak of pool buffer at concurrent writesTakashi Iwai2016-02-151-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When multiple concurrent writes happen on the ALSA sequencer device right after the open, it may try to allocate vmalloc buffer for each write and leak some of them. It's because the presence check and the assignment of the buffer is done outside the spinlock for the pool. The fix is to move the check and the assignment into the spinlock. (The current implementation is suboptimal, as there can be multiple unnecessary vmallocs because the allocation is done before the check in the spinlock. But the pool size is already checked beforehand, so this isn't a big problem; that is, the only possible path is the multiple writes before any pool assignment, and practically seen, the current coverage should be "good enough".) The issue was triggered by syzkaller fuzzer. BugLink: http://lkml.kernel.org/r/CACT4Y+bSzazpXNvtAr=WXaL8hptqjHwqEyFA+VN2AWEx=aurkg@mail.gmail.com Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: usb-audio: avoid freeing umidi object twiceAndrey Konovalov2016-02-131-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | The 'umidi' object will be free'd on the error path by snd_usbmidi_free() when tearing down the rawmidi interface. So we shouldn't try to free it in snd_usbmidi_create() after having registered the rawmidi interface. Found by KASAN. Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com> Acked-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | Merge tag 'asoc-fix-v4.5-rc4' of ↵Takashi Iwai2016-02-1228-144/+219
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v4.5 A rather large batch of fixes here, almost all in the Intel driver. The changes that got merged in this merge window for Skylake were rather large and as well as issues that you'd expect in a large block of new code there were some problems created for older processors which needed fixing up. Things are largely settling down now hopefully.
| | \
| | \
| | \
| | \
| | \
| | \
| | \
| | \
| *-------. \ Merge remote-tracking branches 'asoc/fix/rt5659', 'asoc/fix/sigmadsp', ↵Mark Brown2016-02-106-39/+41
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | 'asoc/fix/simple', 'asoc/fix/wm5110' and 'asoc/fix/wm8960' into asoc-linus
| | | | | | * | ASoC: wm8960: Fix WM8960_SYSCLK_PLL modeStuart Henderson2016-01-221-15/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the introduction of WM8960_SYSCLK_AUTO mode, WM8960_SYSCLK_PLL mode was made unusable. Ensure we're not PLL mode before trying to use MCLK. Fixes: 3176bf2d7ccd ("ASoC: wm8960: update pll and clock setting function") Signed-off-by: Stuart Henderson <stuart.henderson@cirrus.com> Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | | | * | ASoC: wm8960: Fix input boost mixer left/right namingStuart Henderson2016-01-221-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | INBMIX1 controls LINPUTs and INBMIX2 controls RINPUTs, so fix the naming accordingly. Signed-off-by: Stuart Henderson <stuart.henderson@cirrus.com> Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | | * | | ASoC: wm5110: Unregister compressed platform when driver is removedRichard Fitzgerald2016-01-221-0/+1
| | | | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver was not unregistering the compressed platform in wm5110_remove(). If the codec is built as a module, this would lead to a NULL pointer deref if the module was unloaded and then re-probed. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | * | | ASoC: simple-card: don't fail if sysclk setting is not supportedAaro Koskinen2016-01-271-1/+1
| | | | | |/ | | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit e22579713ae1 ("ASoC: simple card: set cpu-dai sysclk with mclk-fs") added sysclk / SND_SOC_CLOCK_OUT setting, that makes asoc_simple_card_hw_params fail if the operation is not supported, although the intention clearly was to ignore ENOTSUPP. Fix it. The patch fixes audio playback on Kirkwood / OpenRD client, where the following errors are seen: asoc-simple-card sound: ASoC: machine hw_params failed: -524 alsa-lib: /alsa-lib-1.0.28/src/pcm/pcm_hw.c:327:(snd_pcm_hw_hw_params) SNDRV_PCM_IOCTL_HW_PARAMS failed (-524): Unknown error 524 Fixes: e22579713ae1 ("ASoC: simple card: set cpu-dai sysclk with mclk-fs") Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | ASoC: sigmadsp: Fix missleading return valuePascal Huerst2016-02-101-1/+4
| | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Forwarding the return value of i2c_master_send, leads to errors later on, since i2c_master_send returns the number of bytes transmittet. Check for ret < 0 instead and return 0 otherwise. Signed-off-by: Pascal Huerst <pascal.huerst@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | ASoC: rt5659: avoid unused variable warning for rt5659_acpi_matchArnd Bergmann2016-01-211-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The newly added rt5659 codec driver unconditionally defines an ACPI device match table but then uses ACPI_PTR() to remove the only reference to it, so we get a harmless build warning: sound/soc/codecs/rt5659.c:4200:30: warning: 'rt5659_acpi_match' defined but not used [-Wunused-variable] static struct acpi_device_id rt5659_acpi_match[] = { This changes both the OF match table and the ACPI match table to follow the same style, using ACPI_PTR/of_match_ptr to make the reference conditional, and using an #ifdef to hide the table. This also adds the missing MODULE_DEVICE_TABLE for the OF case and adapts the formatting to the same style. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | ASoC: rt5659: Fix irq leakAxel Lin2016-01-132-13/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use devm_request_threaded_irq to ensure the irq is freed when unload the module. The rt5659->i2c is no longer used after this conversion, thus remove it as well. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | |
| | \ \ \
| | \ \ \
| | \ \ \
| | \ \ \
| | \ \ \
| | \ \ \
| | \ \ \
| *-------. \ \ \ Merge remote-tracking branches 'asoc/fix/imx-spdif', 'asoc/fix/mtk', ↵Mark Brown2016-02-105-38/+22
| |\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'asoc/fix/mxs-saif', 'asoc/fix/qcom' and 'asoc/fix/rt286' into asoc-linus
| | | | | | * | | | ASoC: rt286: fix capture doesn't work at some casesBard Liao2016-01-211-23/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RT286_CBJ_CTRL1(0x4f) bit 10 is needed for headset capture. It will be turned off when "VREF" widget is on and be turned on when bias level is ON. It is odd. And if "VREF" is turned on in bias level is ON, RT286_CBJ_CTRL1(0x4f) bit 10 will be turned off. This patch move the bit control from rt286_set_bias_level and rt298_vref_event to rt286_jack_detect. So it will be turned on once a jack is plugged in. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | | * | | | | ASoC: qcom: use correct device pointer in dma allocationSrinivas Kandagatla2016-01-111-9/+6
| | | | | |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dev pointer in struct snd_soc_pcm_runtime does not have dma_ops set. In v4.4 kernel dma_ops would end up pointing to dummy_dma_ops in such cases. So attempting to use such device in allocating coherent memory on aarch64 would fail. According to commit 1dccb598df549d892b6450c261da54cdd7af44b4 ("arm64: simplify dma_get_ops") The current behavior of dma_get_ops is to fall back to the global dma_ops when a device has not set its own dma_ops, but only for DT based systems. So, this patch fixes the driver to use correct device pointer while allocating coherent memory, and also deletes un-necessary dma_mask setup on soc_runtime->dev. Without this patch lpass driver would fail with below log: ... [ 6.541542] ADV7533: lpass_platform_alloc_buffer: Could not allocate DMA buffer [ 6.541914] apq8016-lpass-cpu 7708000.lpass-cpu: ASoC: pcm constructor failed: -12 [ 6.548216] qcom-apq8016-sbc 7702000.sound: ASoC: can't create pcm ADV7533 :-12 [ 6.555581] qcom-apq8016-sbc 7702000.sound: ASoC: failed to instantiate card -12 [ 6.566072] qcom-apq8016-sbc: probe of 7702000.sound failed with error -12 ... Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | * | | | | ASoC: mxs-saif: fix clk_prepare() without matching clk_unprepare()Mans Rullgard2016-01-271-2/+11
| | | | | |_|/ / | | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The clk_prepare() call in hw_params() has no matching clk_unprepare(), leaving the clk with an ever-increasing prepare count. Moreover, hw_params() can be called multiple times which would again leave us with a runaway prepare count. Fix this by moving the clk_prepare() call to the startup() function and adding a shutdown() function with a matching clk_unprepare() as these operations are already correctly bracketed by soc-core. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | | | ASoC: mediatek: add i2c dependencyArnd Bergmann2016-01-151-2/+2
| | | | |/ / / | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The newly added mediatek drivers for mt8173 select codes that depend on I2C, which cuases a build failure if I2C is disabled: warning: (SND_SOC_ADAU1761_I2C && SND_SOC_ADAU1781_I2C && SND_SOC_ADAU1977_I2C && SND_SOC_RT5677 && EXTCON_MAX14577 && EXTCON_MAX77693 && EXTCON_MAX77843 && BMC150_ACCEL_I2C && BMG160_I2C) selects REGMAP_I2C which has unmet direct dependencies (I2C) codecs/rt5645.c:3854:1: warning: data definition has no type or storage class codecs/rt5645.c:3854:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int] codecs/rt5677.c:5270:1: warning: data definition has no type or storage class 77_i2c_driver); codecs/rt5677.c:5270:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int] This adds an explicit dependency. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Koro Chen <koro.chen@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | | ASoC: imx-spdif: Fix crash on suspendLars-Peter Clausen2016-01-271-2/+0
| | | |/ / / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When registering a ASoC card the driver data of the parent device is set to point to the card. This driver data is used in the snd_soc_suspend()/resume() callbacks. The imx-spdif driver overwrites the driver data with custom data which causes snd_soc_suspend() to crash. Since the custom driver is not used anywhere simply deleting the line which sets the custom driver data fixes the issue. Fixes: 43ac946922b3 ("ASoC: imx-spdif: add snd_soc_pm_ops for spdif machine driver") Tested-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | | |
| | \ \ \ \
| | \ \ \ \
| | \ \ \ \
| | \ \ \ \
| | \ \ \ \
| | \ \ \ \
| | \ \ \ \
| | \ \ \ \
| | \ \ \ \
| *---------. \ \ \ \ Merge remote-tracking branches 'asoc/fix/amd', 'asoc/fix/arizona', ↵Mark Brown2016-02-105-25/+69
| |\ \ \ \ \ \ \ \ \ \ | | | | | | | |_|/ / / | | | | | | |/| | | | | | | | | | | | | | | 'asoc/fix/dpcm', 'asoc/fix/dwc', 'asoc/fix/fsl' and 'asoc/fix/fsl-ssi' into asoc-linus
| | | | | | | * | | | ASoC: fsl_ssi: remove explicit register defaultsMaciej S. Szmigiero2016-01-251-20/+22
| | | | | | | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no guarantee that on fsl_ssi module load SSI registers will have their power-on-reset values. In fact, if the driver is reloaded the values in registers will be whatever they were set to previously. However, the cache needs to be fully populated at probe time to avoid non-atomic allocations during register access. Special case here is imx21-class SSI, since according to datasheet it don't have SACC{ST,EN,DIS} regs. This fixes hard lockup on fsl_ssi module reload, at least in AC'97 mode. Fixes: 05cf237972fe ("ASoC: fsl_ssi: Add driver suspend and resume to support MEGA Fast") Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Tested-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | | * | | | | ASoC: dwc: Ensure i2s_reg_comp{1,2} is always initialisedJon Medhurst (Tixy)2016-02-021-3/+2
| | | | | | |/ / / | | | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the case that the driver is configured from device-tree i2s_reg_comp1 and i2s_reg_comp2 aren't initialised, breaking the driver. Fix this by unconditionally setting these values before checking for quirks. Fixes: a242cac1d3aa ("ASoC: dwc: add quirk to override COMP_PARAM_1 register") Signed-off-by: Jon Medhurst <tixy@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | * | | | | ASoC: dpcm: fix the BE state on hw_freeVinod Koul2016-02-021-1/+2
| | | | |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While performing hw_free, DPCM checks the BE state but leaves out the suspend state. The suspend state needs to be checked as well, as we might be suspended and then usermode closes rather than resuming the audio stream. This was found by a stress testing of system with playback in loop and killed after few seconds running in background and second script running suspend-resume test in loop Signed-off-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
| | | * | | | | ASoC: arizona: fref must be limited in pseudo-fractional modeRichard Fitzgerald2016-02-101-1/+42
| | | |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the FLL is in pseudo-fractional mode there is an additional limit on fref based on the fratio, to prevent aliasing around the Nyquist frequency. If fref exceeds this limit the refclk divider must be increased and the calculation tried again until a suitable combination of fref and fratio is found or we have to fall back to integer mode. This patch also adds some debug log prints around this code. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | | ASoC: AMD: free memory on errorDan Carpenter2016-01-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Static checkers complain if we don't free "adata" before returning. Fixes: 7c31335a03b6 ('ASoC: AMD: add AMD ASoC ACP 2.x DMA driver') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | | | | | Merge remote-tracking branch 'asoc/fix/rt5645' into asoc-linusMark Brown2016-02-101-1/+1
| |\ \ \ \ \ \
| | * | | | | | ASoC: rt5645: fix the shift bit of IN1 boostBard Liao2016-01-211-1/+1
| | | |_|/ / / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The shift bit of IN1 boost gain control is 12. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
| * | | | | | Merge remote-tracking branch 'asoc/fix/intel-kconfig' into asoc-linusMark Brown2016-02-104-8/+21
| |\ \ \ \ \ \
| | * | | | | | ASoC: Intel: Add module tags for common match moduleVinod Koul2016-02-081-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The match module lacked module license and description, so add it Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | | | ASoC: Intel: Load the atom DPCM driver onlyPierre-Louis Bossart2016-02-082-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DPCM driver is recommended for BYT, CHT based platforms, so if CONFIG_SND_SST_IPC_ACPI is selected then don't compile the BYT Device IDs in common ACPI driver to avoid probe conflicts. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | | | ASoC: Intel: Create independent acpi match moduleVinod Koul2016-02-082-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ACPI match module is common to all three drivers, HSW, SKL and Atom-DPCM driver. But Atom-DPCM driver does not use common sst code so we cannot include the common SST module in Atom-DPCM driver. So the solution is to have a independent sst-match-acpi module which helps in matching for all the three drivers. Now all driver can be inbuilt in a single image This patch really fixes the regression introduced by the commit 95f098014815 ("ASoC: Intel: Move apci find machine routines") Acked-by: Jie Yang <yang.jie@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | | | ASoC: Intel: Revert "ASoC: Intel: fix ACPI probe regression with Atom DPCM ↵Vinod Koul2016-02-081-5/+0
| | | |_|/ / / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | driver" This reverts commit dc901a354171 ("ASoC: Intel: fix ACPI probe regression with Atom DPCM driver") as the fix prevented the probe on HSW/BDW if Atom-DPCM was selected Acked-by: Jie Yang <yang.jie@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | | | | | Merge remote-tracking branch 'asoc/fix/intel' into asoc-linusMark Brown2016-02-106-29/+61
| |\ \ \ \ \ \
| | * | | | | | ASoC: Intel: Skylake: Remove autosuspend delayVinod Koul2016-02-041-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver used autosuspend delay to delay going to D3. But per HW recommendation we should go to D3 soon, so remove the delay from driver Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | | | ASoC: Intel: Skylake: Fix stereo DMIC recordJeeja KP2016-02-041-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DMIC BE can have 2 or 4 channels supported. The DMIC fixup needs to take this into account. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | | | ASoC: Intel: Skylake: Add missing PRE/POST_PMU handlers for vmixerJeeja KP2016-02-041-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some modules may be directly connected to a pipeline without a mixer module. For these modules, we require PRE_PMU and POST_PMU handler which will do bind between the pipelines, so add these missing handlers. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | | | ASoC: Intel: Skylake: Fix bind of source with multiple sinksJeeja KP2016-02-041-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | skl_tplg_bind_sinks() takes only the first sink widget. This breaks in case we have multiple sinks for a module. So pass source widget to skl_tplg_bind_sinks() and bind for all sinks by calling this recursively Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | | | ASoC: Intel: Skylake: Fix not to stop sink pipe in pga pmd eventJeeja KP2016-02-041-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We should not stop the sink pipe in it's pmd handler for a mixin module as this module may still be connected to other pipes. This will be stopped and freed by current implementation on last connected pipe unbind. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | | | ASoC: Intel: Skylake: Fix the module state check conditionJeeja KP2016-02-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For binding modules we should check if source or destination module is in UNINT state. We canot bind even if one of them is in this state. So update the check from logical AND to logical OR and do not bind modules for this case Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | | | ASoC: Intel: Skylake: Fix return of skl_get_queue_indexJeeja KP2016-02-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In unbind modules, the skl_get_queue_index() can return error if the pin is dynamic and module is not bound yet. So instead of returning error this check should return success as modules is not yet bound. This will let the module be bound when connected pipes are enabled and will bind this as well. So change the return value to 0 Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | | | ASoC: Intel: Skylake: Fix pipe memory allocation leakDharageswari.R2016-02-041-13/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We check and allocate pipeline resources in one shot. That causes leaks if module creation fails later as that is not freed. So split the resource allocation into two, first check if resources are available and then add the resources upon successful creation. So two new functions are added for checking and current functions are re-purposed to only add the resources for memory and MCPS. Signed-off-by: Dharageswari.R <dharageswari.r@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | | | ASoC: Intel: Skylake: Fix mcps freeup after module unbind failureGuneshwor Singh2016-02-041-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While cleaning resources on module pmd event, we check for return of skl_unbind_modules(). On failure this causes leak as all modules attached do not have resources freed. So ignore return value of module unbind and continue freeing resources. This makes dapm state and resources correct. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
OpenPOWER on IntegriCloud