summaryrefslogtreecommitdiffstats
path: root/sound/isa/Kconfig
Commit message (Collapse)AuthorAgeFilesLines
* ALSA: ISA: Remove snd-sgalaxyRené Herman2010-08-131-10/+0
| | | | | | | Its hardware is handled more fully by the new azt1605/azt2316 drivers. Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: ISA: New Aztech Sound Galaxy driverRené Herman2010-08-131-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a new driver for Aztech Sound Galaxy ISA soundcards based on the AZT1605 and AZT2316 chipsets. It's constructed as two seperate drivers for either chipset generated from the same source file, with (very) minimal ifdeffery. The drivers check the SB DSP version to decide if they are being loaded for the right chip. AZT1605 returns 2.1 by default and AZT2316 3.1. This isn't full-proof as the DSP version can actually be set through software but it's close enough -- as far as I've been able to see, the DSP version can not be stored in the EEPROM and the cards will therefore startup with the defaults. This distinction could (with the same success rate) also be used to decide which chip we're looking at at runtime meaning a single, merged driver is also an option but I feel it's actually nicer this way. A merged driver would have to postpone translating the passed in resource values to the card configuration until it knew which one it was looking at and would need to postpone erring out on mpu_irq=10 for azt1605 and mpu_irq=3 for azt2316. The drivers have been tested on various cards. For snd-azt1605: FCC-ID I38-MMSN811: Aztech Sound Galaxy Nova 16 Extra FCC-ID I38-MMSN822: Aztech Sound Galaxy Pro 16 II and for snd-azt2316: FCC-ID I38-MMSN824: Aztech Sound Galaxy Pro 16 AB FCC-ID I38-MMSN826: Trust Sound Expert DeLuxe Wave 32 (05201) FCC-ID I38-MMSN830: Trust Sound Expert DeLuxe 16+ (05202) FCC-ID I38-MMSN837: Packard Bell ISA Soundcard 030069 FCC-ID I38-MMSN846: Trust Sound Expert DeLuxe 16-3D (06300) FCC-ID I38-MMSN847: Trust Sound Expert DeLuxe Wave 32-3D (06301) FCC-ID I38-MMSN852: Aztech Sound Galaxy Waverider Pro 32-3D 826 and 846 were also marketed directly by Aztech and then known as: FCC-ID I38-MMSN826: Aztech Sound Galaxy Waverider 32+ FCC-ID I38-MMSN846: Aztech Sound Galaxy Nova 16 Extra II-3D Together, these cover the AZT1605 and AT2316A, AZT2316R and AZT2316-S chipsets. All cards work fully -- full-duplex PCM, MIDI and FM. Full duplex is a little flaky on some. I38-MSN811 tends to not work in full-duplex but sometimes does with the highest success rate being achieved when you first start the capture and then a playback instead of the other way around (it's a CS4231-KL codec). The cards with an AD1845XP codec (my I38-MMSN826 and one of my I38-MMSN830s) are also somewhat duplex-challenged. Sometimes full-duplex works, sometimes not and this varies from try to try. This seems likely to be a timing problem somewhere inside wss-lib. I38-MMSN826 has an additional "ICS2115 WaveFront" wavetable synth onboard that isn't supported yet. The wavetable synths on I38-MMSN847 and I38-MMSN852 are wired directly to the standard MPU-401 UART and the AUX1 input on the codec and work without problem. CD-ROM audio on the cards is routed to the codec "Line" input, Line-In to its Aux input, and FM/Wavetable to its AUX1 input. I did not rename the controls due to the capture source enumeration: I see that capture-source overrides are hardcoded in wss-lib and this is just too ugly to live. Versus the old snd-sgalaxy driver these drivers add support for the models without a configuration EEPROM (which are common), full-duplex, MPU-401 UART and OPL3. In the future they might grow support for that ICS2115 WaveFront synth on 826 and an hwdep interface to write to the EEPROM on the models that have one. Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: Merge es1688 and es968 driversKrzysztof Helt2010-05-101-14/+2
| | | | | | | | | | | | | | | | | The ESS ES968 chip is nothing more then a PnP companion for a non-PnP audio chip. It was paired with non-PnP ESS' chips: ES688 and ES1688. The ESS' audio chips are handled by the es1688 driver in native mode. The PnP cards are handled by the ES968 driver in SB compatible mode. Move the ES968 chip handling to the es1688 driver so the driver can handle both PnP and non-PnP cards. The es968 is removed. Also, a new PnP id is added for the card I acquired (the change was tested on this card). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: jazz16: Add support for Media Vision Jazz16 chipsetKrzysztof Helt2009-12-211-0/+16
| | | | | | | | | | | This is one of Sound Blaster Pro compatible chipsets which is supported by Linux OSS driver and was missing native supoort for ALSA. The Jazz16 audio codec is Crystal CS4216 which is capable of playback and recording up to 48 kHz stereo. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: dt019x: merge into the als100 driverKrzysztof Helt2009-12-111-17/+4
| | | | | | | | | The als100 driver is so similar to the dt019x/als007 driver that one driver's source can be used for both drivers with only few changes. Merge the dt019x driver into the als100. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: sscape: convert to firmware loader frameworkKrzysztof Helt2009-10-011-2/+6
| | | | | | | | | | | The conversion solves the problem that firmware size was set to 64KB while non PnP cards have 128KB firmware files. An additional firmware initialization code has been moved from the OSS driver. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: sscape: add supoort for SPEA Media FX/Reveal SC-600Krzysztof Helt2009-09-281-2/+4
| | | | | | | Move code from the OSS sscape driver in order to support old Soundscape OEM models. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge branch 'topic/sc6000' into for-linusTakashi Iwai2009-06-101-2/+5
|\ | | | | | | | | | | | | * topic/sc6000: ALSA: sc6000: enable joystick port ALSA: sc6000: fix older card initialization ALSA: sc6000: add support for SC-6600 and SC-7000
| * ALSA: sc6000: add support for SC-6600 and SC-7000Krzysztof Helt2009-04-141-2/+5
| | | | | | | | | | | | | | | | | | | | Add support for later cards based on CompuMedia ASC-9408 chipsets. These cards were produced by Gallant. This patch make the OSS aedsp16 driver redundant. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: wavefront - Always use request_firmware()Takashi Iwai2009-04-061-10/+0
|/ | | | | | | Always use request_firmware() for loading yss225_registers image. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* Merge branch 'topic/sscape-fix' into for-linusTakashi Iwai2009-03-241-2/+5
|\
| * ALSA: sscape: update Kconfig description about SoundScape cardsKrzysztof Helt2009-01-291-2/+5
| | | | | | | | | | | | The SoundScape driver handles more cards then described. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | Merge branch 'topic/msnd' into for-linusTakashi Iwai2009-03-241-0/+31
|\ \
| * | ALSA: Turtle Beach Multisound Classic/Pinnacle driverKrzysztof Helt2009-01-281-0/+31
| |/ | | | | | | | | | | | | | | | | | | | | This is driver for Turtle Beach Multisound cards: Classic, Fiji and Pinnacle. Tested pcm playback and recording and MIDI playback on Multisound Pinnacle. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: cs4236: cs4232 and cs4236 driver merge to solve PnP BIOS detectionKrzysztof Helt2009-02-161-17/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cs4232 and cs4236 driver merge to solve PnP BIOS detection. Also, the patch adds recognition if the chip is cs4236b+ or earlier part. This unifies drivers for both cs4232 and cs4236+ chips. It allows to use the PnP BIOS detection for the cs4236+ chips. Previously, only the snd-cs4232 could be detected by the PnP BIOS. The cs4232+ cards reports two separate PnP BIOS ids. The patch adds search for the second id to find out resources assigned to a control port. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: cmi8330: add MPU-401 supportKrzysztof Helt2009-01-291-0/+1
| | | | | | | | | | | | | | Add MPU-401 port support for the chip. Also, update some error messages and description. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: cmi8330: add OPL3 supportKrzysztof Helt2009-01-211-0/+1
|/ | | | | | | | Add OPL3 handling to the driver and volume control for FM synthesis. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: gusextreme: Fix build errorsVille Syrjala2008-11-101-1/+1
| | | | | | | | | | | | gusextreme depends on opl3 support. Add the approriate select to Kconfig. Also remove the unnecessary hwdep select. Relevant build errors: ERROR: "snd_opl3_hwdep_new" [sound/isa/gus/snd-gusextreme.ko] undefined! ERROR: "snd_opl3_create" [sound/isa/gus/snd-gusextreme.ko] undefined! Signed-off-by: Ville Syrjala <syrjala@sci.fi> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: remove obsolete *_FIRMARE_IN_KERNEL in isa/KconfigTakashi Iwai2008-08-291-1/+1
| | | | | Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* ALSA: wss_lib: use wss detection code instead of ad1848 oneKrzysztof Helt2008-08-061-10/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | Use the wss detection code and kill the ad1848 library. The library is fully assimilated into the new wss library. This required reworking of the AD1848 family code so the code is changed to correctly detect chips from the AD1848 and CS4231 families. I have tested it on following cards: Gallant SC-6600 (codec: AD1848, driver: snd-sc6600) SoundScape VIVO/90 (codec: AD1845, driver: snd-sscape) SG Waverider (codec: CS4231A, driver: Rene Herman's snd-galaxy) Opti930 (codec: built-in - CS4231 compatible, driver: snd-opti93x) Opti931 (codec: built-in - CS4231 compatible, driver: snd-opti93x) Gallant SC-70P (chip/codec: CS4237B, driver: snd-cs4236) Audio Plus 3D (chip/codec: CMI8330A, driver: snd-cmi8330) Dell Latitude CP (chip/codec: cs4236, driver snd-cs4232) Sound playback and recording works on all these cards. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* ALSA: wss_lib: use wss pcm code instead of ad1848 oneKrzysztof Helt2008-08-061-2/+3
| | | | | | | | | | | | | Use the wss pcm code and kill the ad1848 pcm code. The AD1848 chip is much slower than CS4231 chips so the waiting loop was increased 100x (10x is not enough). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* ALSA: wss_lib: move cs4231_lib into wss_libKrzysztof Helt2008-08-061-14/+14
| | | | | | | | | | | | | Move the file sound/isa/cs423x/cs4231_lib.c into sound/isa/cs423x/wss_lib.c This is the first step toward merging all libraries for Windows Sound System compatible chips into a single library. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.gitDavid Woodhouse2008-07-141-9/+0
|\ | | | | | | | | | | Conflicts: sound/pci/Kconfig
| * firmware: convert sb16_csp driver to use firmware loader exclusivelyJaswinder Singh2008-07-141-9/+0
| | | | | | | | | | Signed-off-by: Jaswinder Singh <jaswinder@infradead.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | ALSA: opti93x: use cs4231 libKrzysztof Helt2008-06-131-1/+1
| | | | | | | | | | | | | | | | | | | | This patch converts the Opti93x driver to use the cs4231 library instead of duplicating the code. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Tested-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* | [ALSA] remove SND_GUS_SYNTHAdrian Bunk2008-06-061-8/+0
| | | | | | | | | | | | | | | | | | After the removal of the sequencer instrument layer SND_GUS_SYNTH was no longer used. Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | sound: Convert to menuconfigTakashi Iwai2008-05-271-33/+18
|/ | | | | | Convert menu in sound Kconfig files to menuconfig and if. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] SC6000 driver - add HAS_IOPORT dependencyJaroslav Kysela2007-10-161-1/+1
| | | | Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Gallant SC-6000 driverKrzysztof Helt2007-10-161-0/+13
| | | | | | | | | | This is port of the Gallant SC-6000 driver from the OSS aedsp16 driver. This card was also sold as AudioExcel DSP 16 and Zoltrix AV302 (Audio Plus True 16). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] wavefront - Use standard firmware loaderTakashi Iwai2007-10-161-4/+5
| | | | | | | | | | | | | Use the standard firmware loader for loading ICS2115 OS firmware file. This is the last old bad guy that is still using sys_open() and sys_read() calls, and now all should be gone. The patch also adds the missing description of module options related with wavefront_synth.c. Due to this rewrite, user will have to copy or make symlink the firmware file appropriately to the standard firmware path such as /lib/firmware. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] fix SND_CS5530=y, ISA=n compilationAdrian Bunk2007-07-201-3/+3
| | | | | | | | | | | | | | | | | | | | | This patch fixes the following compile error with CONFIG_SND_CS5530=y, CONFIG_ISA=n: <-- snip --> ... LD .tmp_vmlinux1 sound/built-in.o: In function 'snd_sb16_capture_trigger': sb16_main.c:(.text+0x212ad): undefined reference to 'snd_sbdsp_command' sb16_main.c:(.text+0x212cc): undefined reference to 'snd_sbdsp_command' sb16_main.c:(.text+0x212f7): undefined reference to 'snd_sbdsp_command' sound/built-in.o: In function 'snd_sb16_playback_trigger': sb16_main.c:(.text+0x2136d): undefined reference to 'snd_sbdsp_command' sb16_main.c:(.text+0x2138c): undefined reference to 'snd_sbdsp_command' ... <-- snip --> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Fix SB-module dependency with PCI driversTakashi Iwai2007-07-201-6/+20
| | | | | | | | | A few PCI drivers like ALS4000 and CS5530 require the SB16-codes. This patch fixes / improves the dependency between SB modules and PCI drivers. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] do not depend on FW_LOADER when internal firmware images are usedClemens Ladisch2007-05-111-2/+2
| | | | | | | | | Since request_firmware() is no longer used when the internal firmware images are used, it is no longer necessary to depend on FW_LOADER in this case. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Kconfig: clarify help text for external firmware entriesClemens Ladisch2007-05-111-4/+4
| | | | | | | | The external firmware files are not in the alsa-plugins but in the alsa-firmware package. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Kconfig: fix FW_LOADER dependenciesClemens Ladisch2007-05-111-2/+2
| | | | | | | | | Move the FW_LOADER dependencies out of the *_FIRMWARE_IN_KERNEL entries because these drivers use the firmware loader regardless of whether there is an in-kernel firmware image. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Enable Kconfig options for external firmwaresTakashi Iwai2007-05-111-2/+20
| | | | | | | | Some drivers are already ifdefs for enabling external firmwares but not defined in Kconfig. Now they appear as the kernel configs. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] wavefront: add request_firmware()Clemens Ladisch2007-02-091-0/+1
| | | | | | | | Load the YSS225 register initialization data using request_firmware(), if possible, instead of using the built-in data blob. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] sb16: add request_firmware()Clemens Ladisch2007-02-091-0/+1
| | | | | | | | Load the CSP programs using request_firmware(), if possible, instead of using the built-in firmware blobs. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Fix dependency of snd-adlib driver in KconfigTakashi Iwai2006-10-221-0/+1
| | | | | | | Added the missing dependency on CONFIG_SND for snd-adlib driver. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] AdLib FM card driverRene Herman2006-03-311-0/+9
| | | | | | | | | | | | | | | Attached you'll find an ALSA driver for AdLib FM cards. An AdLib card is just an OPL2, which was already supported by sound/drivers/opl3, so only very minimal bus-glue is needed. The patch applies cleanly to both 2.6.16 and 2.6.16-mm1. The driver has been tested with an actual ancient 8-bit ISA AdLib card and works fine. It also works fine for an OPL3 {,emulation} as still found on many ISA soundcards but given that AdLib cards don't have their own mixer, upping the volume from 0 might be a problem without the card driver already loaded and driving the OPL3. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Add snd-miro driverMartin Langer2006-03-311-0/+14
| | | | | | Added snd-miro driver for miroSOUND PCM by Martin Langer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Remove SND_GENERIC_DRIVER from isa/KconfigTakashi Iwai2006-01-031-13/+0
| | | | | | | | Modules: ISA Remove the obsolete SND_GENERIC_DRIVER from isa/Kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Sort Kconfig entriesTakashi Iwai2006-01-031-79/+79
| | | | | | | | Modules: ISA,PCI drivers Sort Kconfig entries in alphabetical order. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Add snd_card_set_generic_dev() call to ISA driversTakashi Iwai2005-09-121-5/+13
| | | | | | | | | | | | | ISA,CMI8330 driver,ES18xx driver,OPL3SA2 driver,Sound Galaxy driver Sound Scape driver,AD1848 driver,CS4231 driver,CS4236+ driver ES1688 driver,GUS Classic driver,GUS Extreme driver,GUS MAX driver AMD InterWave driver,Opti9xx drivers,SB16/AWE driver,SB8 driver Wavefront drivers - Added snd_card_set_generic_dev() call. - Added SND_GENERIC_DRIVER to Kconfig. - Clean up the error path in probe if necessary. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [PATCH] use select in sound/isa/KconfigBodo Eggert2005-09-071-7/+12
| | | | | | | | | | | | | In sound/isa/Kconfig, select ISAPNP and depend on ISAPNP are intermixed, resulting in funny behaviour. (Soundcarts get selectable if other soundcards are selected). This patch changes the "depend on ISAPNP"s to select. Signed-Off-By: Bodo Eggert <7eggert@gmx.de> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Kconfig fix (ISA_DMA_API and sound/*)Al Viro2005-08-231-1/+1
| | | | | | | | fixed kconfig dependencies on ISA_DMA_API for parts of sound/* that rely on it. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [ALSA] select ISAPNP for SND_INTERWAVE_STB targetJaroslav Kysela2005-05-291-0/+1
| | | | | | | ISA Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [PATCH] interwave needs isa pnpAndrew Morton2005-05-051-0/+1
| | | | | | | Fix bug #4509 Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Linux-2.6.12-rc2Linus Torvalds2005-04-161-0/+377
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
OpenPOWER on IntegriCloud