summaryrefslogtreecommitdiffstats
path: root/net/wireless/reg.c
Commit message (Collapse)AuthorAgeFilesLines
* cfg80211: Extend channel to frequency mapping for 802.11jBruno Randolf2011-01-211-3/+3
| | | | | | | | | | | | | | | | | | | | | | Extend channel to frequency mapping for 802.11j Japan 4.9GHz band, according to IEEE802.11 section 17.3.8.3.2 and Annex J. Because there are now overlapping channel numbers in the 2GHz and 5GHz band we can't map from channel to frequency without knowing the band. This is no problem as in most contexts we know the band. In places where we don't know the band (and WEXT compatibility) we assume the 2GHz band for channels below 14. This patch does not implement all channel to frequency mappings defined in 802.11, it's just an extension for 802.11j 20MHz channels. 5MHz and 10MHz channels as well as 802.11y channels have been omitted. The following drivers have been updated to reflect the API changes: iwl-3945, iwl-agn, iwmc3200wifi, libertas, mwl8k, rt2x00, wl1251, wl12xx. The drivers have been compile-tested only. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: Brian Prodoehl <bprodoehl@gmail.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: fix transposition of words in printkBob Copeland2011-01-041-1/+1
| | | | | | | | | | Fixes the misplaced article in the following: "cfg80211: Updating information on frequency 5785 MHz for 20 a MHz width channel with regulatory rule:" Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: fix null pointer dereference with a custom regulatory requestLuis R. Rodriguez2010-12-161-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Once we moved the core regulatory request to the queue and let the scheduler process it last_request will have been left NULL until the schedular decides to process the first request. When this happens and we are loading a driver with a custom regulatory request like all Atheros drivers we end up with a NULL pointer dereference. We fix this by checking if the request was a custom one. BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [<ffffffffa016de87>] freq_reg_info_regd.clone.2+0x27/0x130 [cfg80211] PGD 71f91067 PUD 712b2067 PMD 0 Oops: 0000 [#1] PREEMPT SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/firmware/2-1/loading CPU 0 Modules linked in: ath9k_htc(+) ath9k_common ath9k_hw ath <etc> Pid: 3094, comm: insmod Tainted: G W 2.6.37-rc5-wl #16 INVALID/28427ZQ RIP: 0010:[<ffffffffa016de87>] [<ffffffffa016de87>] freq_reg_info_regd.clone.2+0x27/0x130 [cfg80211] RSP: 0018:ffff88007045db78 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffffa047d9a0 RCX: ffff88007045dbd0 RDX: 0000000000004e20 RSI: 000000000024cde0 RDI: ffff8800700483e0 RBP: ffff88007045db98 R08: ffffffffa02f5b40 R09: 0000000000000001 R10: 000000000000000e R11: 0000000000000001 R12: 0000000000000000 R13: ffff88007004e3b0 R14: 0000000000000000 R15: ffff880070048340 FS: 00007f635a707700(0000) GS:ffff880077400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000004 CR3: 00000000708a9000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process insmod (pid: 3094, threadinfo ffff88007045c000, task ffff8800713e3ec0) Stack: ffffffffa047d9a0 0000000000000000 ffff88007004e3b0 0000000000000000 ffff88007045dc08 ffffffffa016e147 000000007045dc08 0000000000000002 ffff8800700483e0 ffffffffa02f5b40 ffff88007045dbd8 0000000000000000 Call Trace: [<ffffffffa016e147>] wiphy_apply_custom_regulatory+0x137/0x1d0 [cfg80211] [<ffffffffa047a690>] ? ath9k_reg_notifier+0x0/0x50 [ath9k_htc] [<ffffffffa02f47f7>] ath_regd_init+0x347/0x430 [ath] [<ffffffffa047b1f5>] ath9k_htc_probe_device+0x6c5/0x960 [ath9k_htc] [<ffffffffa0472a2c>] ath9k_htc_hw_init+0xc/0x30 [ath9k_htc] [<ffffffffa04747e6>] ath9k_hif_usb_probe+0x216/0x3b0 [ath9k_htc] [<ffffffffa03bb6bc>] usb_probe_interface+0x10c/0x210 [usbcore] [<ffffffff812aec26>] driver_probe_device+0x96/0x1c0 [<ffffffff812aedf3>] __driver_attach+0xa3/0xb0 [<ffffffff812aed50>] ? __driver_attach+0x0/0xb0 [<ffffffff812adaae>] bus_for_each_dev+0x5e/0x90 [<ffffffff812ae8c9>] driver_attach+0x19/0x20 [<ffffffff812ae438>] bus_add_driver+0x168/0x320 [<ffffffff812af071>] driver_register+0x71/0x140 [<ffffffff811fc4a8>] ? __raw_spin_lock_init+0x38/0x70 [<ffffffffa03ba39c>] usb_register_driver+0xdc/0x190 [usbcore] [<ffffffffa03a2000>] ? ath9k_htc_init+0x0/0x4f [ath9k_htc] [<ffffffffa047499e>] ath9k_hif_usb_init+0x1e/0x20 [ath9k_htc] [<ffffffffa03a202b>] ath9k_htc_init+0x2b/0x4f [ath9k_htc] [<ffffffff8100212f>] do_one_initcall+0x3f/0x180 [<ffffffff8109ef5b>] sys_init_module+0xbb/0x200 [<ffffffff8100bf52>] system_call_fastpath+0x16/0x1b Code: <etc, who cares> RIP [<ffffffffa016de87>] freq_reg_info_regd.clone.2+0x27/0x130 [cfg80211] RSP <ffff88007045db78> CR2: 0000000000000004 ---[ end trace 79e4193601c8b713 ]--- Reported-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* net/wireless: Use pr_<level> and netdev_<level>Joe Perches2010-11-241-29/+18
| | | | | | | | No change in output for pr_<level> prefixes. netdev_<level> output is different, arguably improved. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: Fix regulatory bug with multiple cards and delaysLuis R. Rodriguez2010-11-221-9/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When two cards are connected with the same regulatory domain if CRDA had a delayed response then cfg80211's own set regulatory domain would still be the world regulatory domain. There was a bug on cfg80211's logic such that it assumed that once you pegged a request as the last request it was already the currently set regulatory domain. This would mean we would race setting a stale regulatory domain to secondary cards which had the same regulatory domain since the alpha2 would match. We fix this by processing each regulatory request atomically, and only move on to the next one once we get it fully processed. In the case CRDA is not present we will simply world roam. This issue is only present when you have a slow system and the CRDA processing is delayed. Because of this it is not a known regression. Without this fix when a delay is present with CRDA the second card would end up with an intersected regulatory domain and not allow it to use the channels it really is designed for. When two cards with two different regulatory domains were inserted you'd end up rejecting the second card's regulatory domain request. This fails with mac80211_hswim's regtest=2 (two requests, same alpha2) and regtest=3 (two requests, different alpha2) module parameter options. This was reproduced and tested against mac80211_hwsim using this CRDA delayer: #!/bin/bash echo $COUNTRY >> /tmp/log sleep 2 /sbin/crda.orig And these regulatory tests: modprobe mac80211_hwsim regtest=2 modprobe mac80211_hwsim regtest=3 Reported-by: Mark Mentovai <mark@moxienet.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Tested-by: Mark Mentovai <mark@moxienet.com> Tested-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: move mutex locking to reg_process_pending_hints()Luis R. Rodriguez2010-11-221-8/+8
| | | | | | | | | | This will be required in the next patch and it makes the next patch easier to review. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Tested-by: Mark Mentovai <mark@moxienet.com> Tested-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: move reg_work and reg_todo aboveLuis R. Rodriguez2010-11-221-2/+3
| | | | | | | | | These will be used earlier in the next few patches. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Tested-by: Mark Mentovai <mark@moxienet.com> Tested-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: put core regulatory request into queueLuis R. Rodriguez2010-11-221-6/+1
| | | | | | | | | | | | This will simplify the synchronization for pending requests. Without this we have a race between the core and when we restore regulatory settings, although this is unlikely its best to just avoid that race altogether. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Tested-by: Mark Mentovai <mark@moxienet.com> Tested-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: prefix REG_DBG_PRINT() with cfg80211Luis R. Rodriguez2010-11-151-16/+15
| | | | | | | | Everyone's doing it, its the cool thing. Cc: Easwar Krishnan <easwar.krishnan@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: add debug print when processing a channelLuis R. Rodriguez2010-11-151-0/+39
| | | | | | | | | | | | | In the worst case you are seeing really odd things you want more information than what is provided right now, for those that insist and want debug info through CONFIG_CFG80211_REG_DEBUG provide a print of when we are processing a channel and with what regulatory rule. Cc: Easwar Krishnan <easwar.krishnan@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: add debug print when disabling a channel on a custom regdLuis R. Rodriguez2010-11-151-0/+5
| | | | | | Cc: Easwar Krishnan <easwar.krishnan@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: add debug prints for when we ignore regulatory hintsLuis R. Rodriguez2010-11-151-3/+39
| | | | | | | | | | This can help with debugging issues. You will only see these with CONFIG_CFG80211_REG_DEBUG enabled. Cc: Easwar Krishnan <easwar.krishnan@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: fix disabling channels based on hintsLuis R. Rodriguez2010-11-151-1/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After a module loads you will have loaded the world roaming regulatory domain or a custom regulatory domain. Further regulatory hints are welcomed and should be respected unless the regulatory hint is coming from a country IE as the IEEE spec allows for a country IE to be a subset of what is allowed by the local regulatory agencies. So disable all channels that do not fit a regulatory domain sent from a unless the hint is from a country IE and the country IE had no information about the band we are currently processing. This fixes a few regulatory issues, for example for drivers that depend on CRDA and had no 5 GHz freqencies allowed were not properly disabling 5 GHz at all, furthermore it also allows users to restrict devices further as was intended. If you recieve a country IE upon association we will also disable the channels that are not allowed if the country IE had at least one channel on the respective band we are procesing. This was the original intention behind this design but it was completely overlooked... Cc: David Quan <david.quan@atheros.com> Cc: Jouni Malinen <jouni.malinen@atheros.com> cc: Easwar Krishnan <easwar.krishnan@atheros.com> Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: fix allowing country IEs for WIPHY_FLAG_STRICT_REGULATORYLuis R. Rodriguez2010-11-151-0/+1
| | | | | | | | | | | | | | | | We should be enabling country IE hints for WIPHY_FLAG_STRICT_REGULATORY even if we haven't yet recieved regulatory domain hint for the driver if it needed one. Without this Country IEs are not passed on to drivers that have set WIPHY_FLAG_STRICT_REGULATORY, today this is just all Atheros chipset drivers: ath5k, ath9k, ar9170, carl9170. This was part of the original design, however it was completely overlooked... Cc: Easwar Krishnan <easwar.krishnan@atheros.com> Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: pass the reg hint initiator to helpersLuis R. Rodriguez2010-11-151-4/+8
| | | | | | | | | | This is required later. Cc: Easwar Krishnan <easwar.krishnan@atheros.com> Cc: stable@kernel.org signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: fix regression on processing country IEsLuis R. Rodriguez2010-10-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | The patch 4f366c5: wireless: only use alpha2 regulatory information from country IE removed some complex intersection we were always doing between the AP's country IE info and what we got from CRDA. When CRDA sent us back a regulatory domain we would do some sanity checks on that regulatory domain response we just got. Part of these sanity checks included checking that we already had performed an intersection for the request of NL80211_REGDOM_SET_BY_COUNTRY_IE type. This mean that cfg80211 was only processing country IEs for cases where we already had an intersection, but since we removed enforcing this this is no longer required, we should just apply the country IE country hint with the data received from CRDA. This patch has fixes intended for kernels >= 2.6.36. Cc: stable@kernel.org Reported-by: Easwar Krishnan <easwar.krishnan@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211/mac80211: use lockdep_assert_heldJohannes Berg2010-09-161-1/+5
| | | | | | | | | | | | Instead of using a WARN_ON(!mutex_is_locked()) use lockdep_assert_held() which compiles away completely when lockdep isn't enabled, and also is a more accurate assertion since it checks that the current thread is holding the mutex. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wireless: upcase alpha2 values in queue_regulatory_requestJohn W. Linville2010-08-161-9/+7
| | | | | | | This provides a little more flexibility for human users, and it allows us to use isalpha rather than the custom is_alpha_upper. Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: Update of regulatory request initiator handlingYuri Ershov2010-07-281-1/+2
| | | | | | | | In some cases there could be possible dereferencing freed pointer. The update is intended to avoid this issue. Signed-off-by: Yuri Ershov <ext-yuri.ershov@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wireless: remove unneeded variable from regulatory_hint_11d()Dan Carpenter2010-07-261-4/+1
| | | | | | | | The "rd" variable isn't needed any more since 4f366c5dabcb "wireless: only use alpha2 regulatory information from country IE" Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wireless: remove unnecessary reg_same_country_ie_hintJohn W. Linville2010-07-201-45/+0
| | | | | | | | | "Might as well remove reg_same_country_ie_hint() completely since we already dealt with suspend/resume through the regulatory hint disconnect." -- Luis Reported-by: Luis R. Rodriguez <mcgrof@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wireless: only use alpha2 regulatory information from country IEJohn W. Linville2010-07-201-613/+12
| | | | | | | | | | The meaning and/or usage of the country IE is somewhat poorly defined. In practice, this means that regulatory rulesets in a country IE are often incomplete and might be untrustworthy. This removes the code associated with interpreting those rulesets while preserving respect for country "alpha2" codes also contained in the country IE. Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wireless: mark reg_mutex as staticJohn W. Linville2010-06-241-1/+1
| | | | Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wireless: move regulatory_init to .init.textUwe Kleine-König2010-06-181-2/+2
| | | | | | | | regulatory_init is only called by cfg80211_init which is in .init.text, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'master' of ↵John W. Linville2010-04-151-3/+3
|\ | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: Documentation/feature-removal-schedule.txt drivers/net/wireless/ath/ath5k/phy.c drivers/net/wireless/wl12xx/wl1271_main.c
| * Merge branch 'master' of ↵John W. Linville2010-04-081-7/+5
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into merge Conflicts: Documentation/feature-removal-schedule.txt drivers/net/wireless/ath/ath5k/phy.c drivers/net/wireless/iwlwifi/iwl-4965.c drivers/net/wireless/iwlwifi/iwl-agn.c drivers/net/wireless/iwlwifi/iwl-core.c drivers/net/wireless/iwlwifi/iwl-core.h drivers/net/wireless/iwlwifi/iwl-tx.c
| * | wireless: remove trailing space in messagesFrans Pop2010-03-311-3/+3
| | | | | | | | | | | | | | | | | | | | | Also correct indentation in net/wireless/reg.c. Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2010-04-061-7/+5
|\ \ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits) smc91c92_cs: fix the problem of "Unable to find hardware address" r8169: clean up my printk uglyness net: Hook up cxgb4 to Kconfig and Makefile cxgb4: Add main driver file and driver Makefile cxgb4: Add remaining driver headers and L2T management cxgb4: Add packet queues and packet DMA code cxgb4: Add HW and FW support code cxgb4: Add register, message, and FW definitions netlabel: Fix several rcu_dereference() calls used without RCU read locks bonding: fix potential deadlock in bond_uninit() net: check the length of the socket address passed to connect(2) stmmac: add documentation for the driver. stmmac: fix kconfig for crc32 build error be2net: fix bug in vlan rx path for big endian architecture be2net: fix flashing on big endian architectures be2net: fix a bug in flashing the redboot section bonding: bond_xmit_roundrobin() fix drivers/net: Add missing unlock net: gianfar - align BD ring size console messages net: gianfar - initialize per-queue statistics ...
| * | wireless: convert reg_regdb_search_lock to mutexJohn W. Linville2010-03-301-7/+5
| |/ | | | | | | | | | | | | | | | | | | | | Stanse discovered that kmalloc is being called with GFP_KERNEL while holding this spinlock. The spinlock can be a mutex instead, which also enables the removal of the unlock/lock around the lock/unlock of cfg80211_mutex and the call to set_regdom. Reported-by: Jiri Slaby <jirislaby@gmail.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* cfg80211: add regulatory hint disconnect supportLuis R. Rodriguez2010-02-011-3/+154
| | | | | | | | | | | | | | | | This adds a new regulatory hint to be used when we know all devices have been disconnected and idle. This can happen when we suspend, for instance. When we disconnect we can no longer assume the same regulatory rules learned from a country IE or beacon hints are applicable so restore regulatory settings to an initial state. Since driver hints are cached on the wiphy that called the hint, those hints are not reproduced onto cfg80211 as the wiphy will respect its own wiphy->regd regardless. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: avoid flushing the global workqueue for core reg hintsLuis R. Rodriguez2010-02-011-3/+1
| | | | | | | | | | | | | | When cfg80211 starts it will send a core regulatory hint. This is sent to the global workqueue but we force processing of it by flushing the global workqueue. The flushing was done since cfg80211 needs last_request to always be populated. Avoid flushing the global workqueue by processing the work required immediately instead of putting it into a linked list and processing it after the flush. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: make regulatory_hint_11d() band specificLuis R. Rodriguez2010-01-151-20/+54
| | | | | | | | | | | | | | | | | | | | | | | In practice APs do not send country IE channel triplets for channels the AP is not operating on and if they were to do so they would have to use the regulatory extension which we currently do not process. No AP has been seen in practice that does this though so just drop those country IEs. Additionally it has been noted the first series of country IE channels triplets are specific to the band the AP sends. Propagate the band on which the country IE was found on reject the country IE then if the triplets are ever oustide of the band. Although we now won't process country IE information with multiple band information we leave the intersection work as is as it is technically possible for someone to want to eventually process these type of country IEs with regulatory extensions. Cc: Jouni Malinen <jouni.malinen@atheros.com> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: Ingore country IEs with a zero set of number of channelsLuis R. Rodriguez2010-01-141-0/+6
| | | | | | | | | | | | Previous to this and the last patch, titled, "cfg80211: Fix 2 GHz subband calculation for country IEs" we would end up treating these IEs as single channel units. These are in fact just bogus IE triplets so ignore the entire IE if these are found. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: fix 2 GHz subband calculation for country IEsLuis R. Rodriguez2010-01-141-2/+2
| | | | | | | | | | | | | | | | Country IEs triplets are getting an extra channel with the current count. This does not affect regulatory because we always took the intersection between what the AP gave and what CRDA believed is correct. This however does fix processing some Country IEs with multiple sequential 2 GHz triplets. Since our parser and the spec mandates all channels be monitonically increasing we would drop the IE after noticing the second triplet begins on a channel already processed. APs that send these type of country IEs seems rare though. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: Fix country IE parsing for single channel tripletsLuis R. Rodriguez2010-01-121-4/+221
| | | | | | | | | | | | | | | | | | | | | | | | | This enhances the way we parse country IEs to minimize the number of regulatory rules that we create. It also fixes our current implementation which treated country IE triplets with only one channel as one independed regulatory rule even though adjecent rules were also being provided. Without this patch APs which send country IE information with a channel triplet for each individual channel will force cfg80211 to deny HT40 operation as a regulatory rule would have been created independently for each channel and as such configured only for 20 MHz operation. Although 802.11n APs which send country IEs triplets in this fassion are likely rare Benoit reports this against the Ubiquity NanoStation M5, with Country "FR" and HT40 enabled. Since we now have a helper which parses the triplets in intermediate steps we now take care extra care to process padding. Reported-by: Benoit PAPILLAULT <benoit.papillault@free.fr> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: process the max power on a country IELuis R. Rodriguez2010-01-121-1/+1
| | | | | | | | | | | The max power from each country IE triplet was being ignored. This fix isn't critical as CRDA was always being used for the lower limit, but we should process it in case the AP still wants to decrease power output even more for whatever reason. Reported-by: Benoit PAPILLAULT <benoit.papillault@free.fr> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: add debug print when we drop a bogus country IELuis R. Rodriguez2010-01-121-1/+3
| | | | | Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wireless: fix build breakage when CONFIG_CFG80211_REG_DEBUG not setJohn W. Linville2010-01-051-3/+3
| | | | | | Bad macro definition in "cfg80211: add a regulatory debug print"... Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville2010-01-051-1/+1
|\ | | | | | | | | Conflicts: net/mac80211/iface.c
| * cfg80211: fix syntax error on user regulatory hintsLuis R. Rodriguez2010-01-041-1/+1
| | | | | | | | | | | | | | | | | | | | This fixes a syntax error when setting up the user regulatory hint. This change yields the same exact binary object though so it ends up just being a syntax typo fix, fortunately. Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | cfg80211: add a regulatory debug printLuis R. Rodriguez2010-01-051-14/+18
| | | | | | | | | | | | | | Instead of sprinkling code with ifdef's define REG_DBG_PRINT() instead. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | wireless: remove CONFIG_WIRELESS_OLD_REGULATORYJohn W. Linville2009-12-281-87/+2
| | | | | | | | | | | | | | This is no longer needed with the availability of CONFIG_CFG80211_INTERNAL_REGDB. Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville2009-12-281-50/+25
|\ \ | |/
| * wireless: update old static regulatory domain rulesJohn W. Linville2009-12-101-50/+25
| | | | | | | | | | | | | | Update "US" and "JP" for current rules, and replace "EU" rules with the world roaming domain (since it was only a pseudo-domain anyway). Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | wireless: support internal statically compiled regulatory databaseJohn W. Linville2009-12-211-24/+96
|/ | | | | | | | | | | | This patch provides infrastructure for machine translation of the regulatory rules database used by CRDA into a C data structure. It includes code for searching that database as an alternative to dynamic regulatory rules updates via CRDA. Most people should use CRDA instead of this infrastructure, but it provides a better alternative than the WIRELESS_OLD_REGULATORY infrastructure (which can now be removed). Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: indent regulatory messages with spacesKalle Valo2009-12-041-3/+3
| | | | | | | | | | | | | | | | | | | | The regulatory messages in syslog look weird: kernel: cfg80211: Regulatory domain: US kernel: ^I(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) kernel: ^I(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) kernel: ^I(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) kernel: ^I(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) kernel: ^I(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) kernel: ^I(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) kernel: ^I(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) Indent them with four spaces instead of the tab character to get prettier output. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Acked: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: convert bools into flagsJohannes Berg2009-11-191-6/+7
| | | | | | | | | We've accumulated a number of options for wiphys which make more sense as flags as we keep adding more. Convert the existing ones. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* trivial: remove duplicate "different" from commentThadeu Lima de Souza Cascardo2009-08-141-1/+1
| | | | | Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: remove max_bandwidthPat Erley2009-08-141-3/+0
| | | | | | | | | | This removes the max_bandwidth attribute. It is only ever written to, and is duplicated by max_bandwidth_khz in the regulatory code. Signed-off-by: Pat Erley <pat-lkml@erley.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
OpenPOWER on IntegriCloud