summaryrefslogtreecommitdiffstats
path: root/net/mac80211/debugfs_netdev.c
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: move bss_conf into vifJohannes Berg2008-10-311-1/+1
| | | | | | | | | | Move bss_conf into the vif struct so that drivers can access it during ->tx without having to store it in the private data or similar. No driver updates because this is only for when they want to start using it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: remove writable debugs mesh parametersJohannes Berg2008-10-311-88/+24
| | | | | | | | | | | These parameters shouldn't be configurable via debugfs, if they need to be configurable nl80211 support has to be added, if not then they don't need to be writable here either. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Javier Cardona <javier@cozybit.com> Cc: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: convert to %pM away from print_macJohannes Berg2008-10-271-2/+1
| | | | | | | | Also remove a few stray DECLARE_MAC_BUF that were no longer used at all. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* mac80211: fix debugfs netdev renameJohannes Berg2008-10-141-1/+5
| | | | | | | | | If, for some reason, a netdev has no debugfs dir, we shouldn't try to rename that dir. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Robin Holt <holt@sgi.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: remove beacon countersJohannes Berg2008-09-151-6/+0
| | | | | | | | | | | | The beacon counters mac80211 keeps are only used for debugfs, unfortunately, they are incorrect for many hardware designs, namely any design that has a beacon template. Hence, remove the counters so we don't create the impression they are usable. This also allows removing the beacon MESH #ifdef again. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: use nl80211 interface typesJohannes Berg2008-09-151-14/+14
| | | | | | | | | | There's really no reason for mac80211 to be using its own interface type defines. Use the nl80211 types and simplify the configuration code a bit: there's no need to translate them any more now. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: split off mesh handling entirelyJohannes Berg2008-09-151-19/+19
| | | | | | | | | | | | This patch splits off mesh handling from the STA/IBSS. Unfortunately it increases mesh code size a bit, but I think it makes things clearer. The patch also reduces per-interface run-time memory usage. Also clean up a few places where ifdef is not required. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: Fix debugfs file add/del for netdevJouni Malinen2008-08-261-12/+12
| | | | | | | | | | | | | | | | Previous version was using incorrect union structures for non-AP interfaces when adding and removing max_ratectrl_rateidx and force_unicast_rateidx entries. Depending on the vif type, this ended up in corrupting debugfs entries since the dentries inside different union structures ended up going being on top of eachother.. As the end result, debugfs files were being left behind with references to freed data (instant kernel oops on access) and directories were not removed properly when unloading mac80211 drivers. This patch fixes those issues by using only a single union structure based on the vif type. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: revamp virtual interface handlingJohannes Berg2008-07-141-10/+4
| | | | | | | | | This patch revamps the virtual interface handling and makes the code much easier to follow. Fewer functions, better names, less spaghetti code. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: make master netdev handling saneJohannes Berg2008-07-141-7/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, almost every interface type has a 'bss' pointer pointing to BSS information. This BSS information, however, is for a _local_ BSS, not for the BSS we joined, so having it on a STA mode interface makes little sense, but now they have it pointing to the master device, which is an AP mode virtual interface. However, except for some bitrate control data, this pointer is only used in AP/VLAN modes (for power saving stations.) Overall, it is not necessary to even have the master netdev be a valid virtual interface, and it doesn't have to be on the list of interfaces either. This patch changes the master netdev to be special, it now - no longer is on the list of virtual interfaces, which lets me remove a lot of tests for that - no longer has sub_if_data attached, since that isn't used Additionally, this patch changes some vlan/ap mode handling that is related to these 'bss' pointers described above (but in the VLAN case they actually make sense because there they point to the AP they belong to); it also adds some debugging code to IEEE80211_DEV_TO_SUB_IF to validate it is not called on the master netdev any more. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: remove channel use statisticsJohannes Berg2008-05-211-9/+0
| | | | | | | | | | The useless channel use statistics are quite a lot of code, currently use integer divisions in the packet fast path, are rather inaccurate since they do not account for retries and finally nobody even cares. Hence, remove them completely. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: a few code cleanupsJohannes Berg2008-05-071-1/+1
| | | | | | | | | This has some code cleanups (some inspired by checkpatch), I got bored at probably a third of the output though so if somebody else wants to... Signed-off-by: Johannes Berg <johannes@sipsolutions.net Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: rename filesJohannes Berg2008-04-081-1/+1
| | | | | | | | This patch renames all mac80211 files (except ieee80211_i.h) to get rid of the useless ieee80211_ prefix. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: make debugfs files root-onlyJohannes Berg2008-04-081-3/+3
| | | | | | | | | | | | | | | Unfortunately, debugfs can be made to access invalid memory by open()ing a file and then waiting until the corresponding debugfs file has been removed (and, probably, the underlying object.) That could be exploited by any user if the user is able to open debugfs files and can cause networking devices, STA entries or similar to disappear which is quite easy to do. Hence, all debugfs files should be root-only. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix deadlocks in debugfs_netdev.cLuis Carlos Cobo2008-04-011-6/+8
| | | | | | | | | The bug shows up with CONFIG_PREEMPT enabled. Pointed out by Andrew Morton. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* net/mac80211/debugfs_netdev.c: use of bool triggers a gcc bugAndrew Morton2008-04-011-1/+1
| | | | | | | | | | This bool causes my gcc-4.1.0 alpha cross compiler to go into an infinite loop. Switching it to u8 works around that. Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: mesh statistics and config through debugfsLuis Carlos Cobo2008-03-061-0/+197
| | | | | | | | | | This patch contains the debugfs code for mesh statistics and configuration parameters. Please note that generic support for r/w debugfs attributes has been added. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: remove port control enable switch, clean up sta flagsJohannes Berg2008-02-291-9/+0
| | | | | | | | | | | | | | | This patch removes the 802.1X port acess control enable flag since it is not required. Instead, set the authorized flag for each station that we normally communicate with (WDS peers, IBSS peers and APs we're associated to) and require hostapd to set the authorized flag for all stations when port control is not enabled. Also, since I was working in that area, this documents station flags and removes the unused "permanent" one. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: add unified BSS configurationJohannes Berg2008-01-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | This patch (based on Ron Rindjunsky's) creates a framework for a unified way to pass BSS configuration to drivers that require the information, e.g. for implementing power save mode. This patch introduces new ieee80211_bss_conf structure that is passed to the driver via the new bss_info_changed() callback when the BSS configuration changes. This new BSS configuration infrastructure adds the following new features: * drivers are notified of their association AID * drivers are notified of association status and replaces the erp_ie_changed() callback. The patch also does the relevant driver updates for the latter change. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: add beacon configuration via cfg80211Johannes Berg2008-01-281-27/+0
| | | | | | | | | | This patch implements the cfg80211 hooks for configuring beaconing on an access point interface in mac80211. While doing so, it fixes a number of races that could badly crash the machine when the beacon is changed while being requested by the driver. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: move interface type to vif structureJohannes Berg2008-01-281-2/+2
| | | | | | | | | | Drivers that support mixed AP/STA operation may well need to know the type of a virtual interface when iterating over them. The easiest way to support that is to move the interface type variable into the vif structure. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: clean up eapol frame handling/port controlJohannes Berg2008-01-281-18/+9
| | | | | | | | | | | | | | | | | This cleans up the eapol frame handling and some related code in the receive and transmit paths. After this patch * EAPOL frames addressed to us or the EAPOL group address are always accepted regardless of whether they are encrypted or not * other frames from a station are dropped if PAE is enabled and the station is not authorized * unencrypted frames (except the EAPOL frames above) are dropped if drop_unencrypted is enabled * some superfluous code that eth_type_trans handles anyway is gone * port control is done for transmitted packets Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [PATCH] mac80211: validate VLAN interfaces betterJohannes Berg2007-10-101-5/+0
| | | | | | | | | | | | | This patch changes mac80211 to verify that VLAN interfaces are valid and not bother drivers about them any more. VLAN interfaces are now only valid when an AP interface is up with the same MAC address, and are automatically turned off when the AP interface is set down. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Jouni Malinen <j@w1.fi> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] mac80211: revamp interface and filter configurationJohannes Berg2007-10-101-16/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()Joe Perches2007-10-101-1/+2
| | | | | | | This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [MAC80211]: Remove bitfields from struct ieee80211_sub_if_dataJiri Slaby2007-10-101-1/+1
| | | | | | | | | | mac80211, remove bitfields from struct ieee80211_sub_if_data Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [MAC80211]: Remove bitfields from struct ieee80211_if_staJiri Slaby2007-10-101-7/+7
| | | | | | | | | | mac80211, remove bitfields from struct ieee80211_if_sta Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [PATCH] mac80211: use do { } while (0) for multi-line macrosZhu Yi2007-08-061-3/+5
| | | | | | | | Use do { } while (0) for multi-line macros Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Jiri Benc <jbenc@suse.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] mac80211: use debugfs_renameJohannes Berg2007-07-171-3/+6
| | | | | Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] mac80211: improved 802.11g CTS protectionDaniel Drake2007-07-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Currently, CTS protection is partially implemented twice: 1. via prism2 ioctls, only used by hostapd 2. via STA beacon parsing, recorded in sta.use_protection but never used (other than printed in debugfs) Protection control should be implemented on a per-subif basis. For example, a single physical device may be running a soft AP on one channel, and a STA on another. The AP interface should use protection based on what hostapd told it, and the STA interface should use protection based on beacon parsing. These should operate independantly: one subif using protection should not influence the other. To implement this, I moved the use_protection flag into ieee80211_sub_if_data and removed the device-global cts_protect_erp_frames flag. I also made the PRISM2_PARAM_CTS_PROTECT_ERP_FRAMES write operation only available for AP interfaces, to avoid any possibility of the user messing with the behaviour of a STA. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Jiri Benc <jbenc@suse.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [MAC80211]: Add debugfs attributes.Jiri Benc2007-05-051-0/+440
Export various mac80211 internal variables through debugfs. Signed-off-by: Jiri Benc <jbenc@suse.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud