summaryrefslogtreecommitdiffstats
path: root/include/linux/suspend.h
Commit message (Collapse)AuthorAgeFilesLines
* PM / Sleep: Separate printing suspend times from initcall_debugRafael J. Wysocki2012-07-011-0/+6
| | | | | | | | | | | | | | Change the behavior of the newly introduced /sys/power/pm_print_times attribute so that its initial value depends on initcall_debug, but setting it to 0 will cause device suspend/resume times not to be printed, even if initcall_debug has been set. This way, the people who use initcall_debug for reasons other than PM debugging will be able to switch the suspend/resume times printing off, if need be. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* PM / Sleep: Add "prevent autosleep time" statistics to wakeup sourcesRafael J. Wysocki2012-05-011-0/+1
| | | | | | | | | | | | Android uses one wakelock statistics that is only necessary for opportunistic sleep. Namely, the prevent_suspend_time field accumulates the total time the given wakelock has been locked while "automatic suspend" was enabled. Add an analogous field, prevent_sleep_time, to wakeup sources and make it behave in a similar way. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* PM / Sleep: Implement opportunistic sleep, v2Rafael J. Wysocki2012-05-011-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | Introduce a mechanism by which the kernel can trigger global transitions to a sleep state chosen by user space if there are no active wakeup sources. It consists of a new sysfs attribute, /sys/power/autosleep, that can be written one of the strings returned by reads from /sys/power/state, an ordered workqueue and a work item carrying out the "suspend" operations. If a string representing the system's sleep state is written to /sys/power/autosleep, the work item triggering transitions to that state is queued up and it requeues itself after every execution until user space writes "off" to /sys/power/autosleep. That work item enables the detection of wakeup events using the functions already defined in drivers/base/power/wakeup.c (with one small modification) and calls either pm_suspend(), or hibernate() to put the system into a sleep state. If a wakeup event is reported while the transition is in progress, it will abort the transition and the "system suspend" work item will be queued up again. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: NeilBrown <neilb@suse.de>
* PM / Sleep: Drop suspend_stats_update()Rafael J. Wysocki2012-02-171-16/+0
| | | | | | | | | | Since suspend_stats_update() is only called from pm_suspend(), move its code directly into that function and remove the static inline definition from include/linux/suspend.h. Clean_up pm_suspend() in the process. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
* PM / Suspend: Avoid code duplication in suspend statistics updateMarcos Paulo de Souza2012-02-091-0/+16
| | | | | | | | | | | | | | | | | | The code if (error) { suspend_stats.fail++; dpm_save_failed_errno(error); } else suspend_stats.success++; Appears in the kernel/power/main.c and kernel/power/suspend.c. This patch just creates a new function to avoid duplicated code. Suggested-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com> Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* PM / Sleep: Introduce "late suspend" and "early resume" of devicesRafael J. Wysocki2012-01-291-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current device suspend/resume phases during system-wide power transitions appear to be insufficient for some platforms that want to use the same callback routines for saving device states and related operations during runtime suspend/resume as well as during system suspend/resume. In principle, they could point their .suspend_noirq() and .resume_noirq() to the same callback routines as their .runtime_suspend() and .runtime_resume(), respectively, but at least some of them require device interrupts to be enabled while the code in those routines is running. It also makes sense to have device suspend-resume callbacks that will be executed with runtime PM disabled and with device interrupts enabled in case someone needs to run some special code in that context during system-wide power transitions. Apart from this, .suspend_noirq() and .resume_noirq() were introduced as a workaround for drivers using shared interrupts and failing to prevent their interrupt handlers from accessing suspended hardware. It appears to be better not to use them for other porposes, or we may have to deal with some serious confusion (which seems to be happening already). For the above reasons, introduce new device suspend/resume phases, "late suspend" and "early resume" (and analogously for hibernation) whose callback will be executed with runtime PM disabled and with device interrupts enabled and whose callback pointers generally may point to runtime suspend/resume routines. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
* PM / Hibernate: Rewrite unlock_system_sleep() to fix s2disk regressionSrivatsa S. Bhat2012-01-191-2/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 33e638b, "PM / Sleep: Use the freezer_count() functions in [un]lock_system_sleep() APIs" introduced an undesirable change in the behaviour of unlock_system_sleep() since freezer_count() internally calls try_to_freeze() - which we don't need in unlock_system_sleep(). And commit bcda53f, "PM / Sleep: Replace mutex_[un]lock(&pm_mutex) with [un]lock_system_sleep()" made these APIs wide-spread. This caused a regression in suspend-to-disk where snapshot_read() and snapshot_write() were getting frozen due to the try_to_freeze embedded in unlock_system_sleep(), since these functions were invoked when the freezing condition was still in effect. Fix this by rewriting unlock_system_sleep() by open-coding freezer_count() and dropping the try_to_freeze() part. Not only will this fix the regression but this will also ensure that the API only does what it is intended to do, and nothing more, under the hood. While at it, make the code more correct and robust by ensuring that the PF_FREEZER_SKIP flag gets cleared with pm_mutex held, to avoid a race with the freezer. Also, to be on the safer side, open-code freezer_do_not_count() as well (inside lock_system_sleep()), to ensure that any unrelated modification to freezer[_do_not]_count() does not break things again! Reported-and-tested-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* PM / Sleep: Make [un]lock_system_sleep() genericSrivatsa S. Bhat2011-12-081-20/+16
| | | | | | | | | | | | | | | | | | | | The [un]lock_system_sleep() APIs were originally introduced to mutually exclude memory hotplug and hibernation. Directly using mutex_lock(&pm_mutex) to achieve mutual exclusion with suspend or hibernation code can lead to freezing failures. However, the APIs [un]lock_system_sleep() can be safely used to achieve the same, without causing freezing failures. So, since it would be beneficial to modify all the existing users of mutex_lock(&pm_mutex) (in all parts of the kernel), so that they use these safe APIs intead, make these APIs generic by removing the restriction that they work only when CONFIG_HIBERNATE_CALLBACKS is set. Moreover, that restriction didn't buy us anything anyway. Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* PM / Sleep: Use the freezer_count() functions in [un]lock_system_sleep() APIsSrivatsa S. Bhat2011-12-081-4/+3
| | | | | | | | | | | Now that freezer_count() and freezer_do_not_count() don't have the restriction that they are effective only when called by userspace processes, use them in lock_system_sleep() and unlock_system_sleep() instead of open-coding their parts. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* PM / Memory-hotplug: Avoid task freezing failuresSrivatsa S. Bhat2011-11-231-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The lock_system_sleep() function is used in the memory hotplug code at several places in order to implement mutual exclusion with hibernation. However, this function tries to acquire the 'pm_mutex' lock using mutex_lock() and hence blocks in TASK_UNINTERRUPTIBLE state if it doesn't get the lock. This would lead to task freezing failures and hence hibernation failure as a consequence, even though the hibernation call path successfully acquired the lock. But it is to be noted that, since this task tries to acquire pm_mutex, if it blocks due to this, we are *100% sure* that this task is not going to run as long as hibernation sequence is in progress, since hibernation releases 'pm_mutex' only at the very end, when everything is done. And this means, this task is going to be anyway blocked for much more longer than what the freezer intends to achieve; which means, freezing and thawing doesn't really make any difference to this task! So, to fix freezing failures, we just ask the freezer to skip freezing this task, since it is already "frozen enough". But instead of calling freezer_do_not_count() and freezer_count() as it is, we use only the relevant parts of those functions, because restrictions such as 'the task should be a userspace one' etc., might not be relevant in this scenario. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* PM / VT: Cleanup #if defined uglyness and fix compile errorH Hartley Sweeten2011-10-161-3/+6
| | | | | | | | | | | | | | | | | | | | | Introduce the config option CONFIG_VT_CONSOLE_SLEEP in order to cleanup the #if defined ugliness for the vt suspend support functions. Note that CONFIG_VT_CONSOLE is already dependant on CONFIG_VT. The function pm_set_vt_switch is actually dependant on CONFIG_VT and not CONFIG_PM_SLEEP. This fixes a compile error when CONFIG_PM_SLEEP is not set: drivers/tty/vt/vt_ioctl.c:1794: error: redefinition of 'pm_set_vt_switch' include/linux/suspend.h:17: error: previous definition of 'pm_set_vt_switch' was here Also, remove the incorrect path from the comment in console.c. [rjw: Replaced #if defined() with #ifdef in suspend.h.] Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* PM / Hibernate: Include storage keys in hibernation image on s390Martin Schwidefsky2011-10-161-0/+34
| | | | | | | | | | | | For s390 there is one additional byte associated with each page, the storage key. This byte contains the referenced and changed bits and needs to be included into the hibernation image. If the storage keys are not restored to their previous state all original pages would appear to be dirty. This can cause inconsistencies e.g. with read-only filesystems. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* PM / Suspend: Add statistics debugfs file for suspend to RAMShuoX Liu2011-10-161-0/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Record S3 failure time about each reason and the latest two failed devices' names in S3 progress. We can check it through 'suspend_stats' entry in debugfs. The motivation of the patch: We are enabling power features on Medfield. Comparing with PC/notebook, a mobile enters/exits suspend-2-ram (we call it s3 on Medfield) far more frequently. If it can't enter suspend-2-ram in time, the power might be used up soon. We often find sometimes, a device suspend fails. Then, system retries s3 over and over again. As display is off, testers and developers don't know what happens. Some testers and developers complain they don't know if system tries suspend-2-ram, and what device fails to suspend. They need such info for a quick check. The patch adds suspend_stats under debugfs for users to check suspend to RAM statistics quickly. If not using this patch, we have other methods to get info about what device fails. One is to turn on CONFIG_PM_DEBUG, but users would get too much info and testers need recompile the system. In addition, dynamic debug is another good tool to dump debug info. But it still doesn't match our utilization scenario closely. 1) user need write a user space parser to process the syslog output; 2) Our testing scenario is we leave the mobile for at least hours. Then, check its status. No serial console available during the testing. One is because console would be suspended, and the other is serial console connecting with spi or HSU devices would consume power. These devices are powered off at suspend-2-ram. Signed-off-by: ShuoX Liu <shuox.liu@intel.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* notifiers: pm: move pm notifiers into suspend.hAmerigo Wang2011-07-251-0/+8
| | | | | | | | | | | It is not necessary to share the same notifier.h. Signed-off-by: WANG Cong <amwang@redhat.com> Cc: David Miller <davem@davemloft.net> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* PM / Suspend: Add .suspend_again() callback to suspend_opsMyungJoo Ham2011-07-151-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A system or a device may need to control suspend/wakeup events. It may want to wakeup the system after a predefined amount of time or at a predefined event decided while entering suspend for polling or delayed work. Then, it may want to enter suspend again if its predefined wakeup condition is the only wakeup reason and there is no outstanding events; thus, it does not wakeup the userspace unnecessary or unnecessary devices and keeps suspended as long as possible (saving the power). Enabling a system to wakeup after a specified time can be easily achieved by using RTC. However, to enter suspend again immediately without invoking userland and unrelated devices, we need additional features in the suspend framework. Such need comes from: 1. Monitoring a critical device status without interrupts that can wakeup the system. (in-suspend polling) An example is ambient temperature monitoring that needs to shut down the system or a specific device function if it is too hot or cold. The temperature of a specific device may be needed to be monitored as well; e.g., a charger monitors battery temperature in order to stop charging if overheated. 2. Execute critical "delayed work" at suspend. A driver or a system/board may have a delayed work (or any similar things) that it wants to execute at the requested time. For example, some chargers want to check the battery voltage some time (e.g., 30 seconds) after the battery is fully charged and the charger has stopped. Then, the charger restarts charging if the voltage has dropped more than a threshold, which is smaller than "restart-charger" voltage, which is a threshold to restart charging regardless of the time passed. This patch allows to add "suspend_again" callback at struct platform_suspend_ops and let the "suspend_again" callback return true if the system is required to enter suspend again after the current instance of wakeup. Device-wise suspend_again implemented at dev_pm_ops or syscore is not done because: a) suspend_again feature is usually under platform-wise decision and controls the behavior of the whole platform and b) There are very limited devices related to the usage cases of suspend_again; chargers and temperature sensors are mentioned so far. With suspend_again callback registered at struct platform_suspend_ops suspend_ops in kernel/power/suspend.c with suspend_set_ops by the platform, the suspend framework tries to enter suspend again by looping suspend_enter() if suspend_again has returned true and there has been no errors in the suspending sequence or pending wakeups (by pm_wakeup_pending). Tested at Exynos4-NURI. [rjw: Fixed up kerneldoc comment for suspend_enter().] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* PM / Hibernate: Introduce CONFIG_HIBERNATE_CALLBACKSRafael J. Wysocki2011-04-111-8/+3
| | | | | | | | | | | | | | | | | | | | | Xen save/restore is going to use hibernate device callbacks for quiescing devices and putting them back to normal operations and it would need to select CONFIG_HIBERNATION for this purpose. However, that also would cause the hibernate interfaces for user space to be enabled, which might confuse user space, because the Xen kernels don't support hibernation. Moreover, it would be wasteful, as it would make the Xen kernels include a substantial amount of code that they would never use. To address this issue introduce new power management Kconfig option CONFIG_HIBERNATE_CALLBACKS, such that it will only select the code that is necessary for the hibernate device callbacks to work and make CONFIG_HIBERNATION select it. Then, Xen save/restore will be able to select CONFIG_HIBERNATE_CALLBACKS without dragging the entire hibernate code along with it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
* Merge branch 'release' of ↵Linus Torvalds2011-01-131-17/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (59 commits) ACPI / PM: Fix build problems for !CONFIG_ACPI related to NVS rework ACPI: fix resource check message ACPI / Battery: Update information on info notification and resume ACPI: Drop device flag wake_capable ACPI: Always check if _PRW is present before trying to evaluate it ACPI / PM: Check status of power resources under mutexes ACPI / PM: Rename acpi_power_off_device() ACPI / PM: Drop acpi_power_nocheck ACPI / PM: Drop acpi_bus_get_power() Platform / x86: Make fujitsu_laptop use acpi_bus_update_power() ACPI / Fan: Rework the handling of power resources ACPI / PM: Register power resource devices as soon as they are needed ACPI / PM: Register acpi_power_driver early ACPI / PM: Add function for updating device power state consistently ACPI / PM: Add function for device power state initialization ACPI / PM: Introduce __acpi_bus_get_power() ACPI / PM: Introduce function for refcounting device power resources ACPI / PM: Add functions for manipulating lists of power resources ACPI / PM: Prevent acpi_power_get_inferred_state() from making changes ACPICA: Update version to 20101209 ...
| * PM / ACPI: Move NVS saving and restoring code to drivers/acpiRafael J. Wysocki2011-01-071-17/+0
| | | | | | | | | | | | | | | | | | | | The saving of the ACPI NVS area during hibernation and suspend and restoring it during the subsequent resume is entirely specific to ACPI, so move it to drivers/acpi and drop the CONFIG_SUSPEND_NVS configuration option which is redundant. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
| * PM: Fix oops in suspend/hibernate code related to failing ioremap()Jiri Slaby2011-01-071-2/+2
| | | | | | | | | | | | | | | | | | | | When ioremap() fails (which might happen for some reason), we nicely oops in suspend_nvs_save() due to NULL dereference by memcpy() in there. Fail gracefully instead. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
* | Merge branch 'for-next' of ↵Linus Torvalds2011-01-131-4/+4
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) Documentation/trace/events.txt: Remove obsolete sched_signal_send. writeback: fix global_dirty_limits comment runtime -> real-time ppc: fix comment typo singal -> signal drivers: fix comment typo diable -> disable. m68k: fix comment typo diable -> disable. wireless: comment typo fix diable -> disable. media: comment typo fix diable -> disable. remove doc for obsolete dynamic-printk kernel-parameter remove extraneous 'is' from Documentation/iostats.txt Fix spelling milisec -> ms in snd_ps3 module parameter description Fix spelling mistakes in comments Revert conflicting V4L changes i7core_edac: fix typos in comments mm/rmap.c: fix comment sound, ca0106: Fix assignment to 'channel'. hrtimer: fix a typo in comment init/Kconfig: fix typo anon_inodes: fix wrong function name in comment fix comment typos concerning "consistent" poll: fix a typo in comment ... Fix up trivial conflicts in: - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c) - fs/ext4/ext4.h Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
| * | suspend: constify platform_suspend_opsLionel Debroux2010-11-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While at it, fix two checkpatch errors. Several non-const struct instances constified by this patch were added after the introduction of platform_suspend_ops in checkpatch.pl's list of "should be const" structs (79404849e90a41ea2109bd0e2f7c7164b0c4ce73). Patch against mainline. Inspired by hunks of the grsecurity patch, updated for newer kernels. Signed-off-by: Lionel Debroux <lionel_debroux@yahoo.fr> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | hibernation: constify platform_hibernation_opsLionel Debroux2010-11-161-2/+2
| |/ | | | | | | | | | | | | | | | | | | Patch against mainline. Changes since v1: added one hunk; no longer adding "const" qualifier to pointers in platform_hibernation_ops after seeing b4144e4f6e3b448d322095ca08af393682a69e33. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | PM / Wakeup: Replace pm_check_wakeup_events() with pm_wakeup_pending()Rafael J. Wysocki2010-12-241-2/+2
|/ | | | | | | | | To avoid confusion with the meaning and return value of pm_check_wakeup_events() replace it with pm_wakeup_pending() that will work the other way around (ie. return true when system-wide power transition should be aborted). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* PM: Allow wakeup events to abort freezing of tasksRafael J. Wysocki2010-10-171-0/+2
| | | | | | | | | | | | If there is a wakeup event during the freezing of tasks, suspend or hibernation will fail anyway. Since try_to_freeze_tasks() can take up to 20 seconds to complete or fail, aborting it as soon as a wakeup event is detected improves the worst case wakeup latency. Based on a patch from Arve Hjønnevåg. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz>
* PM / Wakeup: Introduce wakeup source objects and event statistics (v3)Rafael J. Wysocki2010-10-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | Introduce struct wakeup_source for representing system wakeup sources within the kernel and for collecting statistics related to them. Make the recently introduced helper functions pm_wakeup_event(), pm_stay_awake() and pm_relax() use struct wakeup_source objects internally, so that wakeup statistics associated with wakeup devices can be collected and reported in a consistent way (the definition of pm_relax() is changed, which is harmless, because this function is not called directly by anyone yet). Introduce new wakeup-related sysfs device attributes in /sys/devices/.../power for reporting the device wakeup statistics. Change the global wakeup events counters event_count and events_in_progress into atomic variables, so that it is not necessary to acquire a global spinlock in pm_wakeup_event(), pm_stay_awake() and pm_relax(), which should allow us to avoid lock contention in these functions on SMP systems with many wakeup devices. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
* PM / Suspend: Fix ordering of calls in suspend error pathsRafael J. Wysocki2010-07-191-4/+6
| | | | | | | | | | | | | | The ACPI suspend code calls suspend_nvs_free() at a wrong place, which may lead to a memory leak if there's an error executing acpi_pm_prepare(), because acpi_pm_finish() will not be called in that case. However, the root cause of this problem is the apparently confusing ordering of calls in suspend error paths that needs to be fixed. In addition to that, fix a typo in a label name in suspend.c. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Len Brown <len.brown@intel.com>
* PM: Make it possible to avoid races between wakeup and system sleepRafael J. Wysocki2010-07-191-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One of the arguments during the suspend blockers discussion was that the mainline kernel didn't contain any mechanisms making it possible to avoid races between wakeup and system suspend. Generally, there are two problems in that area. First, if a wakeup event occurs exactly when /sys/power/state is being written to, it may be delivered to user space right before the freezer kicks in, so the user space consumer of the event may not be able to process it before the system is suspended. Second, if a wakeup event occurs after user space has been frozen, it is not generally guaranteed that the ongoing transition of the system into a sleep state will be aborted. To address these issues introduce a new global sysfs attribute, /sys/power/wakeup_count, associated with a running counter of wakeup events and three helper functions, pm_stay_awake(), pm_relax(), and pm_wakeup_event(), that may be used by kernel subsystems to control the behavior of this attribute and to request the PM core to abort system transitions into a sleep state already in progress. The /sys/power/wakeup_count file may be read from or written to by user space. Reads will always succeed (unless interrupted by a signal) and return the current value of the wakeup events counter. Writes, however, will only succeed if the written number is equal to the current value of the wakeup events counter. If a write is successful, it will cause the kernel to save the current value of the wakeup events counter and to abort the subsequent system transition into a sleep state if any wakeup events are reported after the write has returned. [The assumption is that before writing to /sys/power/state user space will first read from /sys/power/wakeup_count. Next, user space consumers of wakeup events will have a chance to acknowledge or veto the upcoming system transition to a sleep state. Finally, if the transition is allowed to proceed, /sys/power/wakeup_count will be written to and if that succeeds, /sys/power/state will be written to as well. Still, if any wakeup events are reported to the PM core by kernel subsystems after that point, the transition will be aborted.] Additionally, put a wakeup events counter into struct dev_pm_info and make these per-device wakeup event counters available via sysfs, so that it's possible to check the activity of various wakeup event sources within the kernel. To illustrate how subsystems can use pm_wakeup_event(), make the low-level PCI runtime PM wakeup-handling code use it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: markgross <markgross@thegnar.org> Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
* suspend: Move NVS save/restore code to generic suspend functionalityMatthew Garrett2010-06-101-13/+13
| | | | | | | | | | Saving platform non-volatile state may be required for suspend to RAM as well as hibernation. Move it to more generic code. Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
* mm: allow memory hotplug and hibernation in the same kernelAndi Kleen2009-11-171-2/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | Allow memory hotplug and hibernation in the same kernel Memory hotplug and hibernation were exclusive in Kconfig. This is obviously a problem for distribution kernels who want to support both in the same image. After some discussions with Rafael and others the only problem is with parallel memory hotadd or removal while a hibernation operation is in process. It was also working for s390 before. This patch removes the Kconfig level exclusion, and simply makes the memory add / remove functions grab the pm_mutex to exclude against hibernation. Fixes a regression - old kernels didn't exclude memory hotadd and hibernation. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* PM/Hibernate: Move NVS routines into a seperate file (v2).Cornelia Huck2009-06-121-7/+11
| | | | | | | | | | | | | | | The *_nvs_* routines in swsusp.c make use of the io*map() functions, which are only provided for HAS_IOMEM, thus breaking compilation if HAS_IOMEM is not set. Fix this by moving the *_nvs_* routines into hibernate_nvs.c, which is only compiled if HAS_IOMEM is set. [rjw: Change the name of the new file to hibernate_nvs.c, add the license line to the header comment.] Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* PM/Suspend: Introduce two new platform callbacks to avoid breakageRafael J. Wysocki2009-04-191-10/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 900af0d973856d6feb6fc088c2d0d3fde57707d3 (PM: Change suspend code ordering) changed the ordering of suspend code in such a way that the platform .prepare() callback is now executed after the device drivers' late suspend callbacks have run. Unfortunately, this turns out to break ARM platforms that need to talk via I2C to power control devices during the .prepare() callback. For this reason introduce two new platform suspend callbacks, .prepare_late() and .wake(), that will be called just prior to disabling non-boot CPUs and right after bringing them back on line, respectively, and use them instead of .prepare() and .finish() for ACPI suspend. Make the PM core execute the .prepare() and .finish() platform suspend callbacks where they were executed previously (that is, right after calling the regular suspend methods provided by device drivers and right before executing their regular resume methods, respectively). It is not necessary to make analogous changes to the hibernation code and data structures at the moment, because they are only used by ACPI platforms. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Len Brown <len.brown@intel.com>
* pm: rework includes, remove arch ifdefsMagnus Damm2009-04-011-3/+0
| | | | | | | | | | | | | | | Make the following header file changes: - remove arch ifdefs and asm/suspend.h from linux/suspend.h - add asm/suspend.h to disk.c (for arch_prepare_suspend()) - add linux/io.h to swsusp.c (for ioremap()) - x86 32/64 bit compile fixes Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Hibernation: Introduce system_entering_hibernationRafael J. Wysocki2009-01-271-0/+2
| | | | | | | | | | | | | | | | Introduce boolean function system_entering_hibernation() returning 'true' during the last phase of hibernation, in which devices are being put into low power states and the sleep state (for example, ACPI S4) is finally entered. Some device drivers need such a function to check if the system is in the final phase of hibernation. In particular, some SATA drivers are going to use it for blacklisting systems in which the disks should not be spun down during the last phase of hibernation (the BIOS will do that anyway). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* ACPI hibernate: Add a mechanism to save/restore ACPI NVS memoryRafael J. Wysocki2008-12-191-0/+13
| | | | | | | | | | | | | | | | | | | According to the ACPI Specification 3.0b, Section 15.3.2, "OSPM will call the _PTS control method some time before entering a sleeping state, to allow the platform's AML code to update this memory image before entering the sleeping state. After the system awakes from an S4 state, OSPM will restore this memory area and call the _WAK control method to enable the BIOS to reclaim its memory image." For this reason, implement a mechanism allowing us to save the NVS memory during hibernation and to restore it during the subsequent resume. Based on a patch by Zhang Rui. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Nigel Cunningham <nigel@tuxonice.net> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* suspend: fix section mismatch warning - register_nosave_regionMarcin Slusarz2008-08-151-2/+2
| | | | | | | | | | | | | | | | | WARNING: vmlinux.o(.text+0xe684): Section mismatch in reference from the function register_nosave_region() to the function .init.text:__register_nosave_region() The function register_nosave_region() references the function __init __register_nosave_region(). This is often because register_nosave_region lacks a __init annotation or the annotation of __register_nosave_region is wrong. register_nosave_region calls __init function and is called only from __init functions Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* kexec jump: save/restore device stateHuang Ying2008-07-261-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements devices state save/restore before after kexec. This patch together with features in kexec_jump patch can be used for following: - A simple hibernation implementation without ACPI support. You can kexec a hibernating kernel, save the memory image of original system and shutdown the system. When resuming, you restore the memory image of original system via ordinary kexec load then jump back. - Kernel/system debug through making system snapshot. You can make system snapshot, jump back, do some thing and make another system snapshot. - Cooperative multi-kernel/system. With kexec jump, you can switch between several kernels/systems quickly without boot process except the first time. This appears like swap a whole kernel/system out/in. - A general method to call program in physical mode (paging turning off). This can be used to invoke BIOS code under Linux. The following user-space tools can be used with kexec jump: - kexec-tools needs to be patched to support kexec jump. The patches and the precompiled kexec can be download from the following URL: source: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-src_git_kh10.tar.bz2 patches: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-patches_git_kh10.tar.bz2 binary: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec_git_kh10 - makedumpfile with patches are used as memory image saving tool, it can exclude free pages from original kernel memory image file. The patches and the precompiled makedumpfile can be download from the following URL: source: http://khibernation.sourceforge.net/download/release_v10/makedumpfile/makedumpfile-src_cvs_kh10.tar.bz2 patches: http://khibernation.sourceforge.net/download/release_v10/makedumpfile/makedumpfile-patches_cvs_kh10.tar.bz2 binary: http://khibernation.sourceforge.net/download/release_v10/makedumpfile/makedumpfile_cvs_kh10 - An initramfs image can be used as the root file system of kexeced kernel. An initramfs image built with "BuildRoot" can be downloaded from the following URL: initramfs image: http://khibernation.sourceforge.net/download/release_v10/initramfs/rootfs_cvs_kh10.gz All user space tools above are included in the initramfs image. Usage example of simple hibernation: 1. Compile and install patched kernel with following options selected: CONFIG_X86_32=y CONFIG_RELOCATABLE=y CONFIG_KEXEC=y CONFIG_CRASH_DUMP=y CONFIG_PM=y CONFIG_HIBERNATION=y CONFIG_KEXEC_JUMP=y 2. Build an initramfs image contains kexec-tool and makedumpfile, or download the pre-built initramfs image, called rootfs.gz in following text. 3. Prepare a partition to save memory image of original kernel, called hibernating partition in following text. 4. Boot kernel compiled in step 1 (kernel A). 5. In the kernel A, load kernel compiled in step 1 (kernel B) with /sbin/kexec. The shell command line can be as follow: /sbin/kexec --load-preserve-context /boot/bzImage --mem-min=0x100000 --mem-max=0xffffff --initrd=rootfs.gz 6. Boot the kernel B with following shell command line: /sbin/kexec -e 7. The kernel B will boot as normal kexec. In kernel B the memory image of kernel A can be saved into hibernating partition as follow: jump_back_entry=`cat /proc/cmdline | tr ' ' '\n' | grep kexec_jump_back_entry | cut -d '='` echo $jump_back_entry > kexec_jump_back_entry cp /proc/vmcore dump.elf Then you can shutdown the machine as normal. 8. Boot kernel compiled in step 1 (kernel C). Use the rootfs.gz as root file system. 9. In kernel C, load the memory image of kernel A as follow: /sbin/kexec -l --args-none --entry=`cat kexec_jump_back_entry` dump.elf 10. Jump back to the kernel A as follow: /sbin/kexec -e Then, kernel A is resumed. Implementation point: To support jumping between two kernels, before jumping to (executing) the new kernel and jumping back to the original kernel, the devices are put into quiescent state, and the state of devices and CPU is saved. After jumping back from kexeced kernel and jumping to the new kernel, the state of devices and CPU are restored accordingly. The devices/CPU state save/restore code of software suspend is called to implement corresponding function. Known issues: - Because the segment number supported by sys_kexec_load is limited, hibernation image with many segments may not be load. This is planned to be eliminated by adding a new flag to sys_kexec_load to make a image can be loaded with multiple sys_kexec_load invoking. Now, only the i386 architecture is supported. Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Nigel Cunningham <nigel@nigel.suspend2.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Suspend-related patches for 2.6.27Rafael J. Wysocki2008-06-121-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | ACPI PM: Add possibility to change suspend sequence There are some systems out there that don't work correctly with our current suspend/hibernation code ordering. Provide a workaround for these systems allowing them to pass 'acpi_sleep=old_ordering' in the kernel command line so that it will use the pre-ACPI 2.0 ("old") suspend code ordering. Unfortunately, this requires us to add a platform hook to the resuming of devices for recovering the platform in case one of the device drivers' .suspend() routines returns error code. Namely, ACPI 1.0 specifies that _PTS should be called before suspending devices, but _WAK still should be called before resuming them in order to undo the changes made by _PTS. However, if there is an error during suspending devices, they are automatically resumed without returning control to the PM core, so the _WAK has to be called from within device_resume() in that cases. The patch also reorders and refactors the ACPI suspend/hibernation code to avoid duplication as far as reasonably possible. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PM/gxfb: add hook to PM console layer that allows disabling of suspend VT switchAndres Salomon2008-04-281-2/+13
| | | | | | | | | | | | | | | | | | | | | | Prior to suspend, we allocate and switch to a new VT; after suspend, we switch back to the original VT. This can be slow, and is completely unnecessary if the framebuffer we're using can restore video properly. This adds a hook that allows drivers to select whether or not to do this vt switch, and changes the gxfb driver to call this hook. It also adds a module param to gxfb to allow controlling of the vt switch (defaulting to no switch). (Note: I'm not convinced that console_sem is the best way to protect this, but we should probably have some form of locking..) [akpm@linux-foundation.org: build fix] Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Page allocator: clean up pcp draining functionsChristoph Lameter2008-02-051-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Add comments explaing how drain_pages() works. - Eliminate useless functions - Rename drain_all_local_pages to drain_all_pages(). It does drain all pages not only those of the local processor. - Eliminate useless interrupt off / on sequences. drain_pages() disables interrupts on its own. The execution thread is pinned to processor by the caller. So there is no need to disable interrupts. - Put drain_all_pages() declaration in gfp.h and remove the declarations from suspend.h and from mm/memory_hotplug.c - Make software suspend call drain_all_pages(). The draining of processor local pages is may not the right approach if software suspend wants to support SMP. If they call drain_all_pages then we can make drain_pages() static. [akpm@linux-foundation.org: fix build] Signed-off-by: Christoph Lameter <clameter@sgi.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Daniel Walker <dwalker@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Hibernation: Introduce begin() and end() callbacksRafael J. Wysocki2008-02-011-5/+9
| | | | | | | | | Introduce global hibernation callback .end() and rename global hibernation callback .start() to .begin(), in analogy with the recent modifications of the global suspend callbacks. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
* Suspend: Introduce begin() and end() callbacksRafael J. Wysocki2008-02-011-11/+18
| | | | | | | | | | | | | | | | | | | | On ACPI systems the target state set by acpi_pm_set_target() is reset by acpi_pm_finish(), but that need not be called if the suspend fails.  All platforms that use the .set_target() global suspend callback are affected by analogous issues. For this reason, we need an additional global suspend callback that will reset the target state regardless of whether or not the suspend is successful.  Also, it is reasonable to rename the .set_target() callback, since it will be used for a different purpose on ACPI systems (due to ACPI 1.0x code ordering requirements). Introduce the global suspend callback .end() to be executed at the end of the suspend sequence and rename the .set_target() global suspend callback to .begin(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
* PM: Convert PM notifiers to out-of-line codeAlan Stern2008-02-011-11/+2
| | | | | | | | | | | This patch (as1008b) converts the PM notifier routines from inline calls to out-of-line code. It also prevents pm_chain_head from being created when CONFIG_PM_SLEEP isn't enabled, and EXPORTs the notifier registration and unregistration routines. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
* x86: make __{save,restore}_processor_state staticJan Beulich2008-01-301-3/+0
| | | | | | | | | | | | .. allowing to remove their declarations from a global include file (the symbols don't exist for anything but x86). Likewise for 64-bits' fix_processor_context(), just that that one was properly declared in an arch-specific header. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Hibernation: Check if ACPI is enabled during restore in the right placeRafael J. Wysocki2007-10-181-0/+7
| | | | | | | | | | | | | | | | | | | | | | | The following scenario leads to total confusion of the platform firmware on some boxes (eg. HPC nx6325): * Hibernate with ACPI enabled * Resume passing "acpi=off" to the boot kernel To prevent this from happening it's necessary to check if ACPI is enabled (and enable it if that's not the case) _right_ _after_ control has been transfered from the boot kernel to the image kernel, before device_power_up() is called (ie. with interrupts disabled).  Enabling ACPI after calling device_power_up() turns out to be insufficient. For this reason, introduce new hibernation callback ->leave() that will be executed before device_power_up() by the restored image kernel.  To make it work, it also is necessary to move swsusp_suspend() from swsusp.c to disk.c (it's name is changed to "create_image", which is more up to the point). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* PM: Rename hibernation_ops to platform_hibernation_opsRafael J. Wysocki2007-10-181-4/+4
| | | | | | | | | | | | Rename 'struct hibernation_ops' to 'struct platform_hibernation_ops' in analogy with 'struct platform_suspend_ops'. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* PM: Rework struct hibernation_opsRafael J. Wysocki2007-10-181-6/+32
| | | | | | | | | | | | | | | | | During hibernation we also need to tell the ACPI core that we're going to put the system into the S4 sleep state. For this reason, an additional method in 'struct hibernation_ops' is needed, playing the role of set_target() in 'struct platform_suspend_operations'. Moreover, the role of the .prepare() method is now different, so it's better to introduce another method, that in general may be different from .prepare(), that will be used to prepare the platform for creating the hibernation image (.prepare() is used anyway to notify the platform that we're going to enter the low power state after the image has been saved). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* PM: Make suspend_ops staticRafael J. Wysocki2007-10-181-2/+0
| | | | | | | | | | | The variable suspend_ops representing the set of global platform-specific suspend-related operations, used by the PM core, need not be exported outside of kernel/power/main.c .  Make it static. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* PM: Rework struct platform_suspend_opsRafael J. Wysocki2007-10-181-8/+5
| | | | | | | | | | | | | | | | | There is no reason why the .prepare() and .finish() methods in 'struct platform_suspend_ops' should take any arguments, since architectures don't use these methods' argument in any practically meaningful way (ie. either the target system sleep state is conveyed to the platform by .set_target(), or there is only one suspend state supported and it is indicated to the PM core by .valid(), or .prepare() and .finish() aren't defined at all).  There also is no reason why .finish() should return any result. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* PM: Rename struct pm_ops and related thingsRafael J. Wysocki2007-10-181-11/+11
| | | | | | | | | | | | | | | | The name of 'struct pm_ops' suggests that it is related to the power management in general, but in fact it is only related to suspend.  Moreover, its name should indicate what this structure is used for, so it seems reasonable to change it to 'struct platform_suspend_ops'.  In that case, the name of the global variable of this type used by the PM core and the names of related functions should be changed accordingly. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* PM: Move definition of struct pm_ops to suspend.hRafael J. Wysocki2007-10-181-11/+110
| | | | | | | | | | | | | | | | | | | | | | Move the definition of 'struct pm_ops' and related functions from <linux/pm.h> to <linux/suspend.h> . There are, at least, the following reasons to do that: * 'struct pm_ops' is specifically related to suspend and not to the power management in general. * As long as 'struct pm_ops' is defined in <linux/pm.h>, any modification of it causes the entire kernel to be recompiled, which is unnecessary and annoying. * Some suspend-related features are already defined in <linux/suspend.h>, so it is logical to move the definition of 'struct pm_ops' into there. * 'struct hibernation_ops', being the hibernation-related counterpart of 'struct pm_ops', is defined in <linux/suspend.h> . Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OpenPOWER on IntegriCloud