summaryrefslogtreecommitdiffstats
path: root/include/linux/mtd/nand.h
Commit message (Collapse)AuthorAgeFilesLines
...
* mtd: nand: implement the default mtd_ooblayout_opsBoris Brezillon2016-04-191-0/+3
| | | | | | | Replace the default nand_ecclayout definitions for large and small page devices with the equivalent mtd_ooblayout_ops. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
* mtd: nand: export default read/write oob functionsBoris Brezillon2016-04-191-0/+14
| | | | | | | | | | | | | | Export the default read/write oob functions (for the standard and syndrome scheme), so that drivers can use them for their raw implementation and implement their own functions for the normal oob operation. This is required if your ECC engine is capable of fixing some of the OOB data. In this case you have to overload the ->read_oob() and ->write_oob(), but if you don't specify the ->read/write_oob_raw() functions they are assigned to the ->read/write_oob() implementation, which is not what you want. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
* mtd: nand: add new enum for storing ECC algorithmRafał Miłecki2016-04-191-0/+8
| | | | | | | | | | | | | | | Our nand_ecc_modes_t is already a bit abused by value NAND_ECC_SOFT_BCH. This enum should store ECC mode only and putting algorithm details there is a bad idea. It would result in too many values impossible to support in a sane way. To solve this problem let's add a new enum. We'll have to modify all drivers to set it properly but once it's done it'll be possible to drop NAND_ECC_SOFT_BCH. That will result in a cleaner design and more possibilities like setting ECC algorithm for hardware ECC mode. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
* mtd: nand: don't select chip in nand_chip's block_bad opArchit Taneja2016-03-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | One of the arguments passed to struct nand_chip's block_bad op is 'getchip', which, if true, is supposed to get and select the nand device, and later unselect and release the device. This op is intended to be replaceable by drivers. The drivers shouldn't be responsible for selecting/unselecting chip. Like other ops, the chip should already be selected before the block_bad op is called. Remove the getchip argument from the block_bad op and nand_block_checkbad. Move the chip selection to nand_block_isbad, since it is the only caller to nand_block_checkbad which requires chip selection. Modify nand_block_bad (the default function for the op) such that it doesn't select the chip. Remove the getchip argument from the bad_block funcs in cafe_nand, diskonchip and docg4 drivers. Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: kill unused ->ecclayout field in platform_nand_chip structBoris BREZILLON2016-01-261-2/+0
| | | | | | | This field is not set in any board file and can thus be dropped. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: add NAND_NEED_SCRAMBLING option flagBoris BREZILLON2016-01-221-0/+6
| | | | | | | | | Some MLC NANDs are sensitive to repeated patterns and require data to be scrambled in order to limit the number of bitflips. Add a new flag to let the NAND controller know about this constraint. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: add helpers to access ->privBoris BREZILLON2016-01-071-0/+10
| | | | | | | | | Add two helpers to access the field reserved for private controller data. This makes it clearer what this field is reserved for and ease future refactoring. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: use nand_check_erased_ecc_chunk in default ECC read functionsBoris BREZILLON2016-01-061-0/+10
| | | | | | | | | | | | The default NAND read functions are relying on the underlying controller driver to correct bitflips, but some of those controllers cannot properly fix bitflips in erased pages. Check for bitflips in erased pages in default core functions if the driver delegated the this check by setting the NAND_ECC_GENERIC_ERASED_CHECK flag. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Franklin S Cooper Jr. <fcooper@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: return consistent error codes in ecc.correct() implementationsBoris BREZILLON2016-01-061-1/+7
| | | | | | | | | | | | | | | The error code returned by the ecc.correct() are not consistent over the all implementations. Document the expected behavior in include/linux/mtd/nand.h and fix offending implementations. [Brian: this looks like a bugfix for the ECC reporting in the bf5xx_nand driver, but we haven't seen any testing results for it] Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Franklin S Cooper Jr. <fcooper@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: remove unused and buggy get_platform_nandchip() helper functionBoris BREZILLON2015-12-181-9/+0
| | | | | | | | | | | | | | | | | | | Nobody uses the get_platform_nandchip() helper function which is supposed to return a pointer to a platform_nand_chip struct from an mtd_info pointer. Moreover, this function is buggy since the introduction of the plat_nand layer (chip->priv is now storing a pointer to an intermediate plat_nand_data structure allocated in plat_nand_probe(), and we have no way to retrieve a pointer to the provided platform_nand_chip struct from this plat_nand_data pointer). While we are at it, remove the useless (and buggy, since it's pointing to something stored on the stack) data->chip.priv assignment. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: 711fdf627ce1 ("[MTD] [NAND] platform NAND driver: add driver") Cc: Vitaly Wool <vitalywool@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: kill the chip->flash_node fieldBoris BREZILLON2015-12-181-5/+2
| | | | | | | | | | | | Now that the nand_chip struct directly embeds an mtd_info struct we can get rid of the ->flash_node field and forward set/get_flash_node requests to the MTD layer. As a side effect, we no longer need the mtd_set_of_node() call done in nand_dt_init(). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: update mtd_to_nand()Boris BREZILLON2015-12-181-1/+1
| | | | | | | | | | | Now that all drivers are using the mtd instance embedded in the nand_chip struct we can safely update the mtd_to_nand() implementation to use the container_of macro instead of returning the content of mtd->priv. This will allow us to remove mtd->priv = chip assignments done in all NAND controller drivers. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: add nand_to_mtd() helperBoris BREZILLON2015-12-081-0/+5
| | | | | | | Add a new helper to retrieve the MTD device attached to a NAND chip. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: embed an mtd_info structure into nand_chipBoris BREZILLON2015-12-081-0/+2
| | | | | | | | | | | | | Currently all NAND controller drivers are providing both the mtd_info and nand_chip struct and then let the NAND subsystem to initialize a few things before registering the mtd instance to the MTD layer. Embed an mtd_info field into nand_chip to add some consistency to all NAND controller drivers. This change will also help factorizing boilerplate code copied in all NAND drivers. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: fix typo (t_ald -> t_adl)Brian Norris2015-12-011-2/+2
| | | | | | | It's "ADL" ("ALE to data loading" time) not "ALD". Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
* mtd: nand: fix ONFI parameter page layoutBoris BREZILLON2015-12-011-2/+2
| | | | | | | | | src_ssync_features field is only 1 byte large, and the 4th reserved area is actually 8 bytes large. Fixes: d1e1f4e42b5 ("mtd: nand: add support for reading ONFI parameters from NAND device") Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: merge in mtd_to_nand() branchBrian Norris2015-11-191-0/+5
|\ | | | | | | | | | | | | | | In case other subsystems want to merge in this helper for use in their drivers, let's bring in that development separately from the rest of MTD -next development. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: nand: add an mtd_to_nand() helperBoris BREZILLON2015-11-191-0/+5
| | | | | | | | | | | | | | | | | | | | Some drivers are retrieving the nand_chip pointer using the container_of macro on a struct wrapping both the nand_chip and the mtd_info struct while the standard way of retrieving this pointer is through mtd->priv. Provide an helper to do that. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* | mtd: add get/set of_node/flash_node helpersBrian Norris2015-11-111-0/+11
|/ | | | | | | | | | We are going to begin using the mtd->dev.of_node field for MTD device nodes, so let's add helpers for it. Also, we'll be making some conversions on spi_nor (and nand_chip eventually) too, so get that ready with their own helpers. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
* mtd: nand: pass page number to ecc->write_xxx() methodsBoris BREZILLON2015-10-131-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | The ->read_xxx() methods are all passed the page number the NAND controller is supposed to read, but ->write_xxx() do not have such a parameter. This is a problem if we want to properly implement data scrambling/randomization in order to mitigate MLC sensibility to repeated pattern: to prevent bitflips in adjacent pages in the same block we need to avoid repeating the same pattern at the same offset in those pages, hence the randomizer/scrambler engine need to be passed the page value in order to adapt its seed accordingly. Moreover, adding the page parameter to the ->write_xxx() methods add some consistency to the current API. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Josh Wu <josh.wu@atmel.com> CC: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> CC: Maxime Ripard <maxime.ripard@free-electrons.com> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Huang Shijie <shijie.huang@arm.com> CC: Stefan Agner <stefan@agner.ch> CC: devel@driverdev.osuosl.org CC: linux-arm-kernel@lists.infradead.org CC: linux-kernel@vger.kernel.org Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: remove unused ->init_size() hookBoris BREZILLON2015-10-011-6/+0
| | | | | | | | | | | | | | The ->init_size() hook was introduced to let NAND controller drivers support NAND devices that could not be described in the nand_ids table. Since then, the core has added support for extended-id parsing and full-id description, thus allowing to describe pretty much all existing NANDs. Moreover, this hook is not used by any mainline driver, and should not be used by new drivers, because detecting the NAND chip is not something controller specific. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: add nand_check_erased helper functionsBoris BREZILLON2015-09-211-0/+5
| | | | | | | | Add two helper functions to help NAND controller drivers test whether a specific NAND region is erased or not. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: Rename nand_chip .dn to .flash_nodeMarek Vasut2015-09-111-2/+2
| | | | | | | | | Use a more descriptive name for the device_node element in struct nand_chip . This name matches the element name used for device_node property of a flash in the spi-nor framework. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: Fix NAND_USE_BOUNCE_BUFFER flag conflictScott Wood2015-07-071-5/+5
| | | | | | | | | | | | Commit 66507c7bc8895f0da6b ("mtd: nand: Add support to use nand_base poi databuf as bounce buffer") added a flag NAND_USE_BOUNCE_BUFFER using the same bit value as the existing NAND_BUSWIDTH_AUTO. Cc: Kamal Dasu <kdasu.kdev@gmail.com> Fixes: 66507c7bc8895f0da6b ("mtd: nand: Add support to use nand_base poi databuf as bounce buffer") Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: add common DT init codeBrian Norris2015-05-111-0/+5
| | | | | | | | | | | | These are already-documented common bindings for NAND chips. Let's handle them in nand_base. If NAND controller drivers need to act on this data before bringing up the NAND chip (e.g., fill out ECC callback functions, change HW modes, etc.), then they can do so between calling nand_scan_ident() and nand_scan_tail(). Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand_bbt: make nand_scan_bbt() staticBrian Norris2015-05-061-1/+0
| | | | | | This implementation detail is no longer needed outside of nand_bbt.c. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: add ATO manufacturer infoBrian Norris2014-11-251-0/+1
| | | | | | Tested with ATO AFND1G08U3, 128MiB NAND. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: provide detailed description for raw read/write page methodsBoris BREZILLON2014-11-201-2/+15
| | | | | | | | | | | | | | | | read_page_raw and write_page_raw method description is not clear enough. It clearly specifies that ECC correction should not be involved but does not talk about specific layout (by layout I mean where in-band and out-of-band data are stored on the NAND media) used by NAND/ECC controllers. Those specific layouts might impact MTD users and thus should be hidden (as already done in the standard NAND_ECC_HW_SYNDROME implementation). Clearly state this constraint in the nand_ecc_ctrl struct documentation. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: support ONFI timing mode retrieval for non-ONFI NANDsBoris BREZILLON2014-09-221-0/+11
| | | | | | | | | | | | | | | | | | Add an onfi_timing_mode_default field to nand_chip and nand_flash_dev in order to support NAND timings definition for non-ONFI NAND. NAND that support better timings mode than the default one have to define a new entry in the nand_ids table. The default timing mode should be deduced from timings description from the datasheet and the ONFI specification (www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf, chapter 4.15 "Timing Parameters"). You should choose the closest mode that fit the timings requirements of your NAND chip. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* Merge l2-mtd/next into l2-mtd/masterBrian Norris2014-08-191-0/+1
|\
| * mtd: fix linux/mtd/nand.h kernel-doc warningRandy Dunlap2014-08-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Fix kernel-doc warning in <linux/mtd/nand.h>: Warning(..//include/linux/mtd/nand.h:795): No description found for parameter 'ecc' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* | mtd: nand: fix DocBook warnings on nand_sdr_timings docBoris BREZILLON2014-08-191-1/+1
|/ | | | | | | | | | | | | | | Change the comment type (from /** to /*) to prevent DocBook from complaining about missing description for nand_sdr_timings fields. There is currently no need in documenting those fields because they are fully described in the ONFI specification (which is pointed out in the comment). Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: add ONFI timing mode to nand_timings converterBoris BREZILLON2014-07-211-0/+3
| | | | | | | | Add a converter to retrieve NAND timings from an ONFI NAND timing mode. At the moment, only SDR NAND timings are supported. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: define struct nand_timingsBoris BREZILLON2014-07-211-0/+49
| | | | | | | | Define a struct containing the standard NAND timings as described in NAND datasheets. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: Introduce mtd_block_isreserved()Ezequiel Garcia2014-07-081-0/+1
| | | | | | | | | | | | | | In addition to mtd_block_isbad(), which checks if a block is bad or reserved, it's needed to check if a block is reserved only (but not bad). This commit adds an MTD interface for it, in a similar fashion to mtd_block_isbad(). While here, fix mtd_block_isbad() so the out-of-bounds checking is done before the callback check. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: Add support to use nand_base poi databuf as bounce bufferKamal Dasu2014-05-201-0/+5
| | | | | | | | | | | | | | nand_base can be passed a kmap()'d buffers from highmem by filesystems like jffs2. This results in failure to map the physical address of the DMA buffer on various contoller driver on different platforms. This change adds a chip option to use preallocated databuf as bounce buffers used in nand_do_read_ops() and nand_do_write_ops(). This allows for specific nand controller driver to set this option as needed. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: refactor erase_cmd() to return chip statusBrian Norris2014-05-091-3/+2
| | | | | | | | | | | | | | | | | | | | | | | The nand_chip::erase_cmd callback previously served a dual purpose; for one, it allowed a per-flash-chip override, so that AG-AND devices could use a different erase command than other NAND. These AND devices were dropped in commit 14c6578683367b1e7af0c3c09e872b45a45183a7 (mtd: nand: remove AG-AND support). On the other hand, some drivers (denali and doc-g4) need to use this sort of callback to implement controller-specific erase operations. To make the latter operation easier for some drivers (e.g., ST's new BCH NAND driver), it helps if the command dispatch and wait functions can be lumped together, rather than called separately. This patch does two things: 1. Pull the call to chip->waitfunc() into chip->erase_cmd(), and return the status from this callback 2. Rename erase_cmd() to just erase(), since this callback does a little more than just send a command Signed-off-by: Brian Norris <computersforpeace@gmail.com> Tested-by: Lee Jones <lee.jones@linaro.org>
* mtd: nand: fix GET/SET_FEATURES address on 16-bit devicesDavid Mosberger2014-03-251-1/+10
| | | | | | | GET_FEATURES and SET_FEATURES also need byte-addressing on 16-bit devices. Signed-off-by: David Mosberger <davidm@egauge.net> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: add "page" argument for read_subpage hookHuang Shijie2014-03-101-1/+1
| | | | | | | | | Add the "page" argument for the read_subpage hook. With this argument, the implementation of this hook could prints out more accurate information for debugging. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: parse out the JEDEC compliant NANDHuang Shijie2014-03-101-1/+1
| | | | | | | | | | This patch adds the parsing code for the JEDEC compliant NAND. Since we need the 0x40 as the column address, this patch also makes the NAND_CMD_PARAM to use the 8-bit address only. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: add a helper to get the supported features for JEDECHuang Shijie2014-03-101-0/+9
| | | | | | | | Add a helper to get the supported features for JEDEC compliant NAND. Also add a macro JEDEC_FEATURE_16_BIT_BUS. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: add fields for JEDEC in nand_chipHuang Shijie2014-03-101-1/+9
| | | | | | | | Add the jedec_version field, and add an anonymous union which contains the nand_onfi_params and nand_jedec_params. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: add the data structures for JEDEC parameter pageHuang Shijie2014-03-101-0/+75
| | | | | | | | Create the nand_jedec_params{} and jedec_ecc_info{} according to the JESD230A (Revision of JESD230, October 2012). Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: force NAND_CMD_READID onto 8-bit busBrian Norris2014-03-101-0/+10
| | | | | | | | | | | | | | | | | | | | The NAND command helpers tend to automatically shift the column address for x16 bus devices, since most commands expect a word address, not a byte address. The Read ID command, however, expects an 8-bit address (i.e., 0x00, 0x20, or 0x40 should not be translated to 0x00, 0x10, or 0x20). This fixes the column address for a few drivers which imitate the nand_base defaults. Note that I don't touch sh_flctl.c, since it already handles this problem slightly differently (note its comment "READID is always performed using an 8-bit bus"). I have not tested this patch, as I only have x8 parts up for testing at this point. Hopefully that can change soon... Signed-off-by: Brian Norris <computersforpeace@gmail.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-By: Pekon Gupta <pekon@ti.com>
* mtd: nand: remove the NAND_MAX_PAGESIZE/NAND_MAX_OOBSIZEHuang Shijie2014-03-101-8/+0
| | | | | | | | There is no reference to these two macros now. Just remove them. Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: kill the the NAND_MAX_PAGESIZE/NAND_MAX_OOBSIZE for nand_buffers{}Huang Shijie2014-03-101-6/+6
| | | | | | | | | | | | | | | | | The patch converts the arrays to buffer pointers for nand_buffers{}. The cafe_nand.c is the only NAND_OWN_BUFFERS user which allocates nand_buffers{} itself. This patch disables the DMA for nand_scan_ident, and restores the DMA status after we finish the nand_scan_ident. This way, we can get page size and OOB size and use them to allocate cafe->dmabuf. Since the cafe_nand.c uses the NAND_ECC_HW_SYNDROME ECC mode, we do not allocate the buffers for @ecccalc and @ecccode. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: add Intel manufacturer IDHuang Shijie2014-01-201-0/+1
| | | | | | | | | Add the Intel manufacturer Id. Tested with Intel JS29F32G08ACMD1(4096 + 224) which is ONFI 2.0 compliant nand. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: add SanDisk manufacturer IDHuang Shijie2014-01-201-0/+1
| | | | | | | | Add the manufactor ID for SanDisk. Make preparation for SanDisk SDTNRGAMA-008G. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: don't use {read,write}_buf for 8-bit transfersUwe Kleine-König2014-01-141-0/+3
| | | | | | | | | | | | | | | | | | According to the Open NAND Flash Interface Specification (ONFI) Revision 3.1 "Parameters are always transferred on the lower 8-bits of the data bus." for the Get Features and Set Features commands. So using read_buf and write_buf is wrong for 16-bit wide nand chips as they use I/O[15:0]. The Get Features command is easily fixed using 4 times the read_byte callback. For Set Features implement a new overwritable callback "write_byte". Still I expect the default to work just fine for all controllers and making it overwriteable was just done for symmetry. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [Brian: fixed warning] Tested-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: use __packed shorthandBrian Norris2014-01-131-1/+1
| | | | | | | | To be consistent with the rest of include/linux/mtd/nand.h, we should use the __packed shorthand instead of __attribute__((packed)). Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Huang Shijie <b32955@freescale.com>
OpenPOWER on IntegriCloud