summaryrefslogtreecommitdiffstats
path: root/fs/dcache.c
Commit message (Collapse)AuthorAgeFilesLines
...
* more graceful recovery in umount_collect()Al Viro2014-05-031-76/+25
| | | | | | | | | | | | | | | Start with shrink_dcache_parent(), then scan what remains. First of all, BUG() is very much an overkill here; we are holding ->s_umount, and hitting BUG() means that a lot of interesting stuff will be hanging after that point (sync(2), for example). Moreover, in cases when there had been more than one leak, we'll be better off reporting all of them. And more than just the last component of pathname - %pd is there for just such uses... That was the last user of dentry_lru_del(), so kill it off... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* don't remove from shrink list in select_collect()Al Viro2014-05-031-21/+10
| | | | | | | | | | | If we find something already on a shrink list, just increment data->found and do nothing else. Loops in shrink_dcache_parent() and check_submounts_and_drop() will do the right thing - everything we did put into our list will be evicted and if there had been nothing, but data->found got non-zero, well, we have somebody else shrinking those guys; just try again. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* dentry_kill(): don't try to remove from shrink listAl Viro2014-05-011-8/+19
| | | | | | | | | | | | | | | | | | | If the victim in on the shrink list, don't remove it from there. If shrink_dentry_list() manages to remove it from the list before we are done - fine, we'll just free it as usual. If not - mark it with new flag (DCACHE_MAY_FREE) and leave it there. Eventually, shrink_dentry_list() will get to it, remove the sucker from shrink list and call dentry_kill(dentry, 0). Which is where we'll deal with freeing. Since now dentry_kill(dentry, 0) may happen after or during dentry_kill(dentry, 1), we need to recognize that (by seeing DCACHE_DENTRY_KILLED already set), unlock everything and either free the sucker (in case DCACHE_MAY_FREE has been set) or leave it for ongoing dentry_kill(dentry, 1) to deal with. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* expand the call of dentry_lru_del() in dentry_kill()Al Viro2014-04-301-1/+6
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* new helper: dentry_free()Al Viro2014-04-301-5/+10
| | | | | | | The part of old d_free() that dealt with actual freeing of dentry. Taken out of dentry_kill() into a separate function. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* fold try_prune_one_dentry()Al Viro2014-04-301-50/+25
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* fold d_kill() and d_free()Al Viro2014-04-301-52/+24
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* fix races between __d_instantiate() and checks of dentry flagsAl Viro2014-04-191-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | in non-lazy walk we need to be careful about dentry switching from negative to positive - both ->d_flags and ->d_inode are updated, and in some places we might see only one store. The cases where dentry has been obtained by dcache lookup with ->i_mutex held on parent are safe - ->d_lock and ->i_mutex provide all the barriers we need. However, there are several places where we run into trouble: * do_last() fetches ->d_inode, then checks ->d_flags and assumes that inode won't be NULL unless d_is_negative() is true. Race with e.g. creat() - we might have fetched the old value of ->d_inode (still NULL) and new value of ->d_flags (already not DCACHE_MISS_TYPE). Lin Ming has observed and reported the resulting oops. * a bunch of places checks ->d_inode for being non-NULL, then checks ->d_flags for "is it a symlink". Race with symlink(2) in case if our CPU sees ->d_inode update first - we see non-NULL there, but ->d_flags still contains DCACHE_MISS_TYPE instead of DCACHE_SYMLINK_TYPE. Result: false negative on "should we follow link here?", with subsequent unpleasantness. Cc: stable@vger.kernel.org # 3.13 and 3.14 need that one Reported-and-tested-by: Lin Ming <minggr@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2014-04-081-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm updates from Dave Airlie: "Highlights: - drm: Generic display port aux features, primary plane support, drm master management fixes, logging cleanups, enforced locking checks (instead of docs), documentation improvements, minor number handling cleanup, pseudofs for shared inodes. - ttm: add ability to allocate from both ends - i915: broadwell features, power domain and runtime pm, per-process address space infrastructure (not enabled) - msm: power management, hdmi audio support - nouveau: ongoing GPU fault recovery, initial maxwell support, random fixes - exynos: refactored driver to clean up a lot of abstraction, DP support moved into drm, LVDS bridge support added, parallel panel support - gma500: SGX MMU support, SGX irq handling, asle irq work fixes - radeon: video engine bringup, ring handling fixes, use dp aux helpers - vmwgfx: add rendernode support" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (849 commits) DRM: armada: fix corruption while loading cursors drm/dp_helper: don't return EPROTO for defers (v2) drm/bridge: export ptn3460_init function drm/exynos: remove MODULE_DEVICE_TABLE definitions ARM: dts: exynos4412-trats2: enable exynos/fimd node ARM: dts: exynos4210-trats: enable exynos/fimd node ARM: dts: exynos4412-trats2: add panel node ARM: dts: exynos4210-trats: add panel node ARM: dts: exynos4: add MIPI DSI Master node drm/panel: add S6E8AA0 driver ARM: dts: exynos4210-universal_c210: add proper panel node drm/panel: add ld9040 driver panel/ld9040: add DT bindings panel/s6e8aa0: add DT bindings drm/exynos: add DSIM driver exynos/dsim: add DT bindings drm/exynos: disallow fbdev initialization if no device is connected drm/mipi_dsi: create dsi devices only for nodes with reg property drm/mipi_dsi: add flags to DSI messages Skip intel_crt_init for Dell XPS 8700 ...
| * Merge tag 'v3.14' into drm-intel-next-queuedDaniel Vetter2014-03-311-2/+2
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux 3.14 The vt-d w/a merged late in 3.14-rc needs a bit of fine-tuning, hence backmerge. Conflicts: drivers/gpu/drm/i915/i915_gem_gtt.c drivers/gpu/drm/i915/intel_ddi.c drivers/gpu/drm/i915/intel_dp.c All trivial adjacent lines changed type conflicts, so trivial git doesn't even show them in the merg commit. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| * | drm: add pseudo filesystem for shared inodesDavid Herrmann2014-03-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Our current DRM design uses a single address_space for all users of the same DRM device. However, there is no way to create an anonymous address_space without an underlying inode. Therefore, we wait for the first ->open() callback on a registered char-dev and take-over the inode of the char-dev. This worked well so far, but has several drawbacks: - We screw with FS internals and rely on some non-obvious invariants like inode->i_mapping being the same as inode->i_data for char-devs. - We don't have any address_space prior to the first ->open() from user-space. This leads to ugly fallback code and we cannot allocate global objects early. As pointed out by Al-Viro, fs/anon_inode.c is *not* supposed to be used by drivers for anonymous inode-allocation. Therefore, this patch follows the proposed alternative solution and adds a pseudo filesystem mount-point to DRM. We can then allocate private inodes including a private address_space for each DRM device at initialization time. Note that we could use: sysfs_get_inode(sysfs_mnt->mnt_sb, drm_device->dev->kobj.sd); to get access to the underlying sysfs-inode of a "struct device" object. However, most of this information is currently hidden and it's not clear whether this address_space is suitable for driver access. Thus, unless linux allows anonymous address_space objects or driver-core provides a public inode per device, we're left with our own private internal mount point. Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
* | | vfs: add cross-renameMiklos Szeredi2014-04-011-9/+41
| |/ |/| | | | | | | | | | | | | | | | | If flags contain RENAME_EXCHANGE then exchange source and destination files. There's no restriction on the type of the files; e.g. a directory can be exchanged with a symlink. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: J. Bruce Fields <bfields@redhat.com>
* | make prepend_name() work correctly when called with negative *buflenAl Viro2014-03-231-2/+2
|/ | | | | | | | | | | In all callchains leading to prepend_name(), the value left in *buflen is eventually discarded unused if prepend_name() has returned a negative. So we are free to do what prepend() does, and subtract from *buflen *before* checking for underflow (which turns into checking the sign of subtraction result, of course). Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* __dentry_path() fixesAl Viro2014-01-261-3/+6
| | | | | | | | | * we need to save the starting point for restarts * reject pathologically short buffers outright Spotted-by: Denys Vlasenko <dvlasenk@redhat.com> Spotted-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: Remove second variable named error in __dentry_pathEric W. Biederman2014-01-261-1/+0
| | | | | | | | | | | | | | | | | | | | | In commit 232d2d60aa5469bb097f55728f65146bd49c1d25 Author: Waiman Long <Waiman.Long@hp.com> Date: Mon Sep 9 12:18:13 2013 -0400 dcache: Translating dentry into pathname without taking rename_lock The __dentry_path locking was changed and the variable error was intended to be moved outside of the loop. Unfortunately the inner declaration of error was not removed. Resulting in a version of __dentry_path that will never return an error. Remove the problematic inner declaration of error and allow __dentry_path to return errors once again. Cc: stable@vger.kernel.org Cc: Waiman Long <Waiman.Long@hp.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* Merge branch 'for-linus' of ↵Linus Torvalds2014-01-171-1/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull namespace fixes from Eric Biederman: "This is a set of 3 regression fixes. This fixes /proc/mounts when using "ip netns add <netns>" to display the actual mount point. This fixes a regression in clone that broke lxc-attach. This fixes a regression in the permission checks for mounting /proc that made proc unmountable if binfmt_misc was in use. Oops. My apologies for sending this pull request so late. Al Viro gave interesting review comments about the d_path fix that I wanted to address in detail before I sent this pull request. Unfortunately a bad round of colds kept from addressing that in detail until today. The executive summary of the review was: Al: Is patching d_path really sufficient? The prepend_path, d_path, d_absolute_path, and __d_path family of functions is a really mess. Me: Yes, patching d_path is really sufficient. Yes, the code is mess. No it is not appropriate to rewrite all of d_path for a regression that has existed for entirely too long already, when a two line change will do" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: vfs: Fix a regression in mounting proc fork: Allow CLONE_PARENT after setns(CLONE_NEWPID) vfs: In d_path don't call d_dname on a mount point
| * vfs: In d_path don't call d_dname on a mount pointEric W. Biederman2013-11-261-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Aditya Kali (adityakali@google.com) wrote: > Commit bf056bfa80596a5d14b26b17276a56a0dcb080e5: > "proc: Fix the namespace inode permission checks." converted > the namespace files into symlinks. The same commit changed > the way namespace bind mounts appear in /proc/mounts: > $ mount --bind /proc/self/ns/ipc /mnt/ipc > Originally: > $ cat /proc/mounts | grep ipc > proc /mnt/ipc proc rw,nosuid,nodev,noexec 0 0 > > After commit bf056bfa80596a5d14b26b17276a56a0dcb080e5: > $ cat /proc/mounts | grep ipc > proc ipc:[4026531839] proc rw,nosuid,nodev,noexec 0 0 > > This breaks userspace which expects the 2nd field in > /proc/mounts to be a valid path. The symlink /proc/<pid>/ns/{ipc,mnt,net,pid,user,uts} point to dentries allocated with d_alloc_pseudo that we can mount, and that have interesting names printed out with d_dname. When these files are bind mounted /proc/mounts is not currently displaying the mount point correctly because d_dname is called instead of just displaying the path where the file is mounted. Solve this by adding an explicit check to distinguish mounted pseudo inodes and unmounted pseudo inodes. Unmounted pseudo inodes always use mount of their filesstem as the mnt_root in their path making these two cases easy to distinguish. CC: stable@vger.kernel.org Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reported-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
* | dcache: allow word-at-a-time name hashing with big-endian CPUsWill Deacon2013-12-121-1/+1
|/ | | | | | | | | | | | | | | | When explicitly hashing the end of a string with the word-at-a-time interface, we have to be careful which end of the word we pick up. On big-endian CPUs, the upper-bits will contain the data we're after, so ensure we generate our masks accordingly (and avoid hashing whatever random junk may have been sitting after the string). This patch adds a new dcache helper, bytemask_from_count, which creates a mask appropriate for the CPU endianness. Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fold try_to_ascend() into the sole remaining callerAl Viro2013-11-151-31/+18
| | | | | | | | | | There used to be a bunch of tree-walkers in dcache.c, all alike. try_to_ascend() had been introduced to abstract a piece of logics duplicated in all of them. These days all these tree-walkers are implemented via the same iterator (d_walk()), which is the only remaining caller of try_to_ascend(), so let's fold it back... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* dcache.c: get rid of pointless macrosAl Viro2013-11-151-4/+2
| | | | | | | | D_HASH{MASK,BITS} are used once each, both in the same function (d_hash()). At this point they are actively misguiding - they imply that values are compiler constants, which is no longer true. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* take read_seqbegin_or_lock() and friends to seqlock.hAl Viro2013-11-151-29/+0
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* Merge branch 'core-locking-for-linus' of ↵Linus Torvalds2013-11-141-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core locking changes from Ingo Molnar: "The biggest changes: - add lockdep support for seqcount/seqlocks structures, this unearthed both bugs and required extra annotation. - move the various kernel locking primitives to the new kernel/locking/ directory" * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) block: Use u64_stats_init() to initialize seqcounts locking/lockdep: Mark __lockdep_count_forward_deps() as static lockdep/proc: Fix lock-time avg computation locking/doc: Update references to kernel/mutex.c ipv6: Fix possible ipv6 seqlock deadlock cpuset: Fix potential deadlock w/ set_mems_allowed seqcount: Add lockdep functionality to seqcount/seqlock structures net: Explicitly initialize u64_stats_sync structures for lockdep locking: Move the percpu-rwsem code to kernel/locking/ locking: Move the lglocks code to kernel/locking/ locking: Move the rwsem code to kernel/locking/ locking: Move the rtmutex code to kernel/locking/ locking: Move the semaphore core to kernel/locking/ locking: Move the spinlock code to kernel/locking/ locking: Move the lockdep code to kernel/locking/ locking: Move the mutex code to kernel/locking/ hung_task debugging: Add tracepoint to report the hang x86/locking/kconfig: Update paravirt spinlock Kconfig description lockstat: Report avg wait and hold times lockdep, x86/alternatives: Drop ancient lockdep fixup message ...
| * seqcount: Add lockdep functionality to seqcount/seqlock structuresJohn Stultz2013-11-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently seqlocks and seqcounts don't support lockdep. After running across a seqcount related deadlock in the timekeeping code, I used a less-refined and more focused variant of this patch to narrow down the cause of the issue. This is a first-pass attempt to properly enable lockdep functionality on seqlocks and seqcounts. Since seqcounts are used in the vdso gettimeofday code, I've provided non-lockdep accessors for those needs. I've also handled one case where there were nested seqlock writers and there may be more edge cases. Comments and feedback would be appreciated! Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Link: http://lkml.kernel.org/r/1381186321-4906-3-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | prepend_path() needs to reinitialize dentry/vfsmount/mnt on restartsAl Viro2013-11-131-3/+6
| | | | | | | | | | | | ... and equivalent is needed in 3.12; it's broken there as well Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | fix unpaired rcu lock in prepend_path()Li Zhong2013-11-131-0/+4
| | | | | | | | | | Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | Merge branch 'for-linus' of ↵Linus Torvalds2013-11-131-155/+187
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "All kinds of stuff this time around; some more notable parts: - RCU'd vfsmounts handling - new primitives for coredump handling - files_lock is gone - Bruce's delegations handling series - exportfs fixes plus misc stuff all over the place" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (101 commits) ecryptfs: ->f_op is never NULL locks: break delegations on any attribute modification locks: break delegations on link locks: break delegations on rename locks: helper functions for delegation breaking locks: break delegations on unlink namei: minor vfs_unlink cleanup locks: implement delegations locks: introduce new FL_DELEG lock flag vfs: take i_mutex on renamed file vfs: rename I_MUTEX_QUOTA now that it's not used for quotas vfs: don't use PARENT/CHILD lock classes for non-directories vfs: pull ext4's double-i_mutex-locking into common code exportfs: fix quadratic behavior in filehandle lookup exportfs: better variable name exportfs: move most of reconnect_path to helper function exportfs: eliminate unused "noprogress" counter exportfs: stop retrying once we race with rename/remove exportfs: clear DISCONNECTED on all parents sooner exportfs: more detailed comment for path_reconnect ...
| * dcache: don't clear DCACHE_DISCONNECTED too earlyJ. Bruce Fields2013-11-091-1/+0
| | | | | | | | | | | | | | | | | | | | | | DCACHE_DISCONNECTED should not be cleared until we're sure the dentry is connected all the way up to the root of the filesystem. It *shouldn't* be cleared as soon as the dentry is connected to a parent. That will cause bugs at least on exportable filesystems. Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * dcache: Don't set DISCONNECTED on "pseudo filesystem" dentriesJ. Bruce Fields2013-11-091-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I can't for the life of me see any reason why anyone should care whether a dentry that is never hooked into the dentry cache would need DCACHE_DISCONNECTED set. This originates from 4b936885ab04dc6e0bb0ef35e0e23c1a7364d9e5 "fs: improve scalability of pseudo filesystems", which probably just made the false assumption the DCACHE_DISCONNECTED was meant to be set on anything not connected to a parent somehow. So this is just confusing. Ideally the only uses of DCACHE_DISCONNECTED would be in the filehandle-lookup code, which needs it to ensure dentries are connected into the dentry tree before use. I left d_alloc_pseudo there even though it's now equivalent to __d_alloc(), just on the theory the name is better documentation of its intended use outside dcache.c. Cc: Nick Piggin <npiggin@kernel.dk> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * dcache: use IS_ROOT to decide where dentry is hashedJ. Bruce Fields2013-11-091-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Every hashed dentry is either hashed in the dentry_hashtable, or a superblock's s_anon list. __d_drop() assumes it can determine which is the case by checking DCACHE_DISCONNECTED; this is not true. It is true that when DCACHE_DISCONNECTED is cleared, the dentry is not only hashed on dentry_hashtable, but is fully connected to its parents back to the root. But the converse is *not* true: fs/exportfs/expfs.c:reconnect_path() attempts to connect a directory (found by filehandle lookup) back to root by ascending to parents and performing lookups one at a time. It does not clear DCACHE_DISCONNECTED until it's done, and that is not at all an atomic process. In particular, it is possible for DCACHE_DISCONNECTED to be set on a dentry which is hashed on the dentry_hashtable. Instead, use IS_ROOT() to check which hash chain a dentry is on. This *does* work: Dentries are hashed only by: - d_obtain_alias, which adds an IS_ROOT() dentry to sb_anon. - __d_rehash, called by _d_rehash: hashes to the dentry's parent, and all callers of _d_rehash appear to have d_parent set to a "real" parent. - __d_rehash, called by __d_move: rehashes the moved dentry to hash chain determined by target, and assigns target's d_parent to its d_parent, before dropping the dentry's d_lock. Therefore I believe it's safe for a holder of a dentry's d_lock to assume that it is hashed on sb_anon if and only if IS_ROOT(dentry) is true. I believe the incorrect assumption about DCACHE_DISCONNECTED was originally introduced by ceb5bdc2d246 "fs: dcache per-bucket dcache hash locking". Also add a comment while we're here. Cc: Nick Piggin <npiggin@kernel.dk> Acked-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * VFS: Put a small type field into struct dentry::d_flagsDavid Howells2013-11-091-5/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Put a type field into struct dentry::d_flags to indicate if the dentry is one of the following types that relate particularly to pathwalk: Miss (negative dentry) Directory "Automount" directory (defective - no i_op->lookup()) Symlink Other (regular, socket, fifo, device) The type field is set to one of the first five types on a dentry by calls to __d_instantiate() and d_obtain_alias() from information in the inode (if one is given). The type is cleared by dentry_unlink_inode() when it reconstitutes an existing dentry as a negative dentry. Accessors provided are: d_set_type(dentry, type) d_is_directory(dentry) d_is_autodir(dentry) d_is_symlink(dentry) d_is_file(dentry) d_is_negative(dentry) d_is_positive(dentry) A bunch of checks in pathname resolution switched to those. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * fold __d_shrink() into its only remaining callerAl Viro2013-11-091-22/+10
| | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * RCU'd vfsmountsAl Viro2013-11-091-6/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * RCU-delayed freeing of vfsmounts * vfsmount_lock replaced with a seqlock (mount_lock) * sequence number from mount_lock is stored in nameidata->m_seq and used when we exit RCU mode * new vfsmount flag - MNT_SYNC_UMOUNT. Set by umount_tree() when its caller knows that vfsmount will have no surviving references. * synchronize_rcu() done between unlocking namespace_sem in namespace_unlock() and doing pending mntput(). * new helper: legitimize_mnt(mnt, seq). Checks the mount_lock sequence number against seq, then grabs reference to mnt. Then it rechecks mount_lock again to close the race and either returns success or drops the reference it has acquired. The subtle point is that in case of MNT_SYNC_UMOUNT we can simply decrement the refcount and sod off - aforementioned synchronize_rcu() makes sure that final mntput() won't come until we leave RCU mode. We need that, since we don't want to end up with some lazy pathwalk racing with umount() and stealing the final mntput() from it - caller of umount() may expect it to return only once the fs is shut down and we don't want to break that. In other cases (i.e. with MNT_SYNC_UMOUNT absent) we have to do full-blown mntput() in case of mount_lock sequence number mismatch happening just as we'd grabbed the reference, but in those cases we won't be stealing the final mntput() from anything that would care. * mntput_no_expire() doesn't lock anything on the fast path now. Incidentally, SMP and UP cases are handled the same way - no ifdefs there. * normal pathname resolution does *not* do any writes to mount_lock. It does, of course, bump the refcounts of vfsmount and dentry in the very end, but that's it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * switch shrink_dcache_for_umount() to use of d_walk()Al Viro2013-11-091-110/+85
| | | | | | | | | | | | we have too many iterators in fs/dcache.c... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * vfs: introduce d_instantiate_no_diralias()Miklos Szeredi2013-10-241-0/+27
| | | | | | | | | | | | | | | | | | | | ...which just returns -EBUSY if a directory alias would be created. This is to be used by fuse mkdir to make sure that a buggy or malicious userspace filesystem doesn't do anything nasty. Previously fuse used a private mutex for this purpose, which can now go away. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
| * move taking vfsmount_lock down into prepend_path()Al Viro2013-10-241-9/+2
| | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | vfs: decrapify dput(), fix cache behavior under normal loadLinus Torvalds2013-10-311-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We do not want to dirty the dentry->d_flags cacheline in dput() just to set the DCACHE_REFERENCED flag when it is already set in the common case anyway. This way the first cacheline of the dentry (which contains the RCU lookup information etc) can stay shared among multiple CPU's. This finishes off some of the details of all the scalability patches merged during the merge window. Also don't mark dentry_kill() for inlining, since it's the uncommon path and inlining it just makes the common path slower due to extra function entry/exit overhead. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | vfs: fix new kernel-doc warningsRandy Dunlap2013-10-221-8/+7
|/ | | | | | | | | | | | | | | Move kernel-doc notation to immediately before its function to eliminate kernel-doc warnings introduced by commit db14fc3abcd5 ("vfs: add d_walk()") Warning(fs/dcache.c:1343): No description found for parameter 'data' Warning(fs/dcache.c:1343): No description found for parameter 'dentry' Warning(fs/dcache.c:1343): Excess function parameter 'parent' description in 'check_mount' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Miklos Szeredi <mszeredi@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* vfs: fix typo in comment in recent dentry workLinus Torvalds2013-09-151-1/+1
| | | | | | | | | Sedat points out that I transposed some letters in "LRU" and wrote "RLU" instead in one of the new comments explaining the flow. Let's just fix it. Reported-by: Sedat Dilek <sedat.dilek@jpberlin.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* vfs: fix dentry LRU list handling and nr_dentry_unused accountingLinus Torvalds2013-09-131-27/+101
| | | | | | | | | | | | | | | | | | | | | The LRU list changes interacted badly with our nr_dentry_unused accounting, and even worse with the new DCACHE_LRU_LIST bit logic. This introduces helper functions to make sure everything follows the proper dcache d_lru list rules: the dentry cache is complicated by the fact that some of the hotpaths don't even want to look at the LRU list at all, and the fact that we use the same list entry in the dentry for both the LRU list and for our temporary shrinking lists when removing things from the LRU. The helper functions temporarily have some extra sanity checking for the flag bits that have to match the current LRU state of the dentry. We'll remove that before the final 3.12 release, but considering how easy it is to get wrong, this first cleanup version has some very particular sanity checking. Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2013-09-121-98/+178
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile 4 from Al Viro: "list_lru pile, mostly" This came out of Andrew's pile, Al ended up doing the merge work so that Andrew didn't have to. Additionally, a few fixes. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (42 commits) super: fix for destroy lrus list_lru: dynamically adjust node arrays shrinker: Kill old ->shrink API. shrinker: convert remaining shrinkers to count/scan API staging/lustre/libcfs: cleanup linux-mem.h staging/lustre/ptlrpc: convert to new shrinker API staging/lustre/obdclass: convert lu_object shrinker to count/scan API staging/lustre/ldlm: convert to shrinkers to count/scan API hugepage: convert huge zero page shrinker to new shrinker API i915: bail out earlier when shrinker cannot acquire mutex drivers: convert shrinkers to new count/scan API fs: convert fs shrinkers to new scan/count API xfs: fix dquot isolation hang xfs-convert-dquot-cache-lru-to-list_lru-fix xfs: convert dquot cache lru to list_lru xfs: rework buffer dispose list tracking xfs-convert-buftarg-lru-to-generic-code-fix xfs: convert buftarg LRU to generic code fs: convert inode and dentry shrinking to be node aware vmscan: per-node deferred work ...
| * fs: convert inode and dentry shrinking to be node awareDave Chinner2013-09-101-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the shrinker is passing a node in the scan control structure, we can pass this to the the generic LRU list code to isolate reclaim to the lists on matching nodes. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@parallels.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * list_lru: remove special case function list_lru_dispose_all.Glauber Costa2013-09-101-20/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The list_lru implementation has one function, list_lru_dispose_all, with only one user (the dentry code). At first, such function appears to make sense because we are really not interested in the result of isolating each dentry separately - all of them are going away anyway. However, it's implementation is buggy in the following way: When we call list_lru_dispose_all in fs/dcache.c, we scan all dentries marking them with DCACHE_SHRINK_LIST. However, this is done without the nlru->lock taken. The imediate result of that is that someone else may add or remove the dentry from the LRU at the same time. When list_lru_del happens in that scenario we will see an element that is not yet marked with DCACHE_SHRINK_LIST (even though it will be in the future) and obviously remove it from an lru where the element no longer is. Since list_lru_dispose_all will in effect count down nlru's nr_items and list_lru_del will do the same, this will lead to an imbalance. The solution for this would not be so simple: we can obviously just keep the lru_lock taken, but then we have no guarantees that we will be able to acquire the dentry lock (dentry->d_lock). To properly solve this, we need a communication mechanism between the lru and dentry code, so they can coordinate this with each other. Such mechanism already exists in the form of the list_lru_walk_cb callback. So it is possible to construct a dcache-side prune function that does the right thing only by calling list_lru_walk in a loop until no more dentries are available. With only one user, plus the fact that a sane solution for the problem would involve boucing between dcache and list_lru anyway, I see little justification to keep the special case list_lru_dispose_all in tree. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Michal Hocko <mhocko@suse.cz> Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * dcache: convert to use new lru list infrastructureDave Chinner2013-09-101-92/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [glommer@openvz.org: don't reintroduce double decrement of nr_unused_dentries, adapted for new LRU return codes] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * shrinker: convert superblock shrinkers to new APIDave Chinner2013-09-101-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert superblock shrinker to use the new count/scan API, and propagate the API changes through to the filesystem callouts. The filesystem callouts already use a count/scan API, so it's just changing counters to longs to match the VM API. This requires the dentry and inode shrinker callouts to be converted to the count/scan API. This is mainly a mechanical change. [glommer@openvz.org: use mult_frac for fractional proportions, build fixes] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * dcache: remove dentries from LRU before putting on dispose listDave Chinner2013-09-101-21/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One of the big problems with modifying the way the dcache shrinker and LRU implementation works is that the LRU is abused in several ways. One of these is shrink_dentry_list(). Basically, we can move a dentry off the LRU onto a different list without doing any accounting changes, and then use dentry_lru_prune() to remove it from what-ever list it is now on to do the LRU accounting at that point. This makes it -really hard- to change the LRU implementation. The use of the per-sb LRU lock serialises movement of the dentries between the different lists and the removal of them, and this is the only reason that it works. If we want to break up the dentry LRU lock and lists into, say, per-node lists, we remove the only serialisation that allows this lru list/dispose list abuse to work. To make this work effectively, the dispose list has to be isolated from the LRU list - dentries have to be removed from the LRU *before* being placed on the dispose list. This means that the LRU accounting and isolation is completed before disposal is started, and that means we can change the LRU implementation freely in future. This means that dentries *must* be marked with DCACHE_SHRINK_LIST when they are placed on the dispose list so that we don't think that parent dentries found in try_prune_one_dentry() are on the LRU when the are actually on the dispose list. This would result in accounting the dentry to the LRU a second time. Hence dentry_lru_del() has to handle the DCACHE_SHRINK_LIST case Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * dentry: move to per-sb LRU locksDave Chinner2013-09-101-17/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the dentry LRUs being per-sb structures, there is no real need for a global dentry_lru_lock. The locking can be made more fine-grained by moving to a per-sb LRU lock, isolating the LRU operations of different filesytsems completely from each other. The need for this is independent of any performance consideration that may arise: in the interest of abstracting the lru operations away, it is mandatory that each lru works around its own lock instead of a global lock for all of them. [glommer@openvz.org: updated changelog ] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * dcache: convert dentry_stat.nr_unused to per-cpu countersDave Chinner2013-09-101-3/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before we split up the dcache_lru_lock, the unused dentry counter needs to be made independent of the global dcache_lru_lock. Convert it to per-cpu counters to do this. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * fs: bump inode and dentry counters to longGlauber Costa2013-09-101-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This series reworks our current object cache shrinking infrastructure in two main ways: * Noticing that a lot of users copy and paste their own version of LRU lists for objects, we put some effort in providing a generic version. It is modeled after the filesystem users: dentries, inodes, and xfs (for various tasks), but we expect that other users could benefit in the near future with little or no modification. Let us know if you have any issues. * The underlying list_lru being proposed automatically and transparently keeps the elements in per-node lists, and is able to manipulate the node lists individually. Given this infrastructure, we are able to modify the up-to-now hammer called shrink_slab to proceed with node-reclaim instead of always searching memory from all over like it has been doing. Per-node lru lists are also expected to lead to less contention in the lru locks on multi-node scans, since we are now no longer fighting for a global lock. The locks usually disappear from the profilers with this change. Although we have no official benchmarks for this version - be our guest to independently evaluate this - earlier versions of this series were performance tested (details at http://permalink.gmane.org/gmane.linux.kernel.mm/100537) yielding no visible performance regressions while yielding a better qualitative behavior in NUMA machines. With this infrastructure in place, we can use the list_lru entry point to provide memcg isolation and per-memcg targeted reclaim. Historically, those two pieces of work have been posted together. This version presents only the infrastructure work, deferring the memcg work for a later time, so we can focus on getting this part tested. You can see more about the history of such work at http://lwn.net/Articles/552769/ Dave Chinner (18): dcache: convert dentry_stat.nr_unused to per-cpu counters dentry: move to per-sb LRU locks dcache: remove dentries from LRU before putting on dispose list mm: new shrinker API shrinker: convert superblock shrinkers to new API list: add a new LRU list type inode: convert inode lru list to generic lru list code. dcache: convert to use new lru list infrastructure list_lru: per-node list infrastructure shrinker: add node awareness fs: convert inode and dentry shrinking to be node aware xfs: convert buftarg LRU to generic code xfs: rework buffer dispose list tracking xfs: convert dquot cache lru to list_lru fs: convert fs shrinkers to new scan/count API drivers: convert shrinkers to new count/scan API shrinker: convert remaining shrinkers to count/scan API shrinker: Kill old ->shrink API. Glauber Costa (7): fs: bump inode and dentry counters to long super: fix calculation of shrinkable objects for small numbers list_lru: per-node API vmscan: per-node deferred work i915: bail out earlier when shrinker cannot acquire mutex hugepage: convert huge zero page shrinker to new shrinker API list_lru: dynamically adjust node arrays This patch: There are situations in very large machines in which we can have a large quantity of dirty inodes, unused dentries, etc. This is particularly true when umounting a filesystem, where eventually since every live object will eventually be discarded. Dave Chinner reported a problem with this while experimenting with the shrinker revamp patchset. So we believe it is time for a change. This patch just moves int to longs. Machines where it matters should have a big long anyway. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Chinner <dchinner@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | vfs: make d_path() get the root path under RCULinus Torvalds2013-09-121-2/+14
| | | | | | | | | | | | | | | | | | | | | | This avoids the spinlocks and refcounts in the d_path() sequence too (used by /proc and various other entities). See commit 8b19e34188a3 for the equivalent getcwd() system call path. And unlike getcwd(), d_path() doesn't copy the result to user space, so I don't need to fear _that_ particular bug happening again. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | vfs: use __getname/__putname for getcwd() system callLinus Torvalds2013-09-121-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's a pathname. It should use the pathname allocators and deallocators, and PATH_MAX instead of PAGE_SIZE. Never mind that the two are commonly the same. With this, the allocations scale up nicely too, and I can do getcwd() system calls at a rate of about 300M/s, with no lock contention anywhere. Of course, nobody sane does that, especially since getcwd() is traditionally a very slow operation in Unix. But this was also the simplest way to benchmark the prepend_path() improvements by Waiman, and once I saw the profiles I couldn't leave it well enough alone. But apart from being an performance improvement (from using per-cpu slab allocators instead of the raw page allocator), it's actually a valid and real cleanup. Signed-off-by: Linus "OCD" Torvalds <torvalds@linux-foundation.org>
OpenPOWER on IntegriCloud