summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial
Commit message (Collapse)AuthorAgeFilesLines
* USB: qcserial: add Sierra Wireless MC74xx/EM74xxBjørn Mork2015-10-221-0/+2
| | | | | | | | | New device IDs shamelessly lifted from the vendor driver. Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: qcserial: update comment for Sierra Wireless MC7304/MC7354David Ward2015-10-091-1/+1
| | | | | | | | | This comment is ambiguous since there are other MC73xx devices with different USB IDs. This USB ID is found in the MC7304 and MC7354. Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: Johan Hovold <johan@kernel.org>
* Revert "USB: qcserial/option: make AT URCs work for Sierra Wireless MC73xx"David Ward2015-10-092-9/+1
| | | | | | | | | | | | | | This reverts commit d80c0d14183516f184a5ac88e11008ee4c7d2a2e (excluding the change to MAX_BL_NUM, which has since been removed). The qcserial driver now enables the SET_CONTROL_LINE_STATE request so that AT URCs will work. Move these devices back to the qcserial driver, which is used for other devices in this series that follow the same layout. Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: Johan Hovold <johan@kernel.org>
* Revert "USB: qcserial/option: make AT URCs work for Sierra Wireless ↵David Ward2015-10-092-2/+1
| | | | | | | | | | | | | | | MC7305/MC7355" This reverts commit 653cdc13a340ad1cef29f1bab0d05d0771fa1d57. The qcserial driver now enables the SET_CONTROL_LINE_STATE request so that AT URCs will work. Move these devices back to the qcserial driver, which is used for other devices in this series that follow the same layout. Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: qcserial: make AT URCs work for Sierra Wireless devicesDavid Ward2015-10-091-0/+11
| | | | | | | | | | | | | | | | | Three Sierra Wireless modems have been found to require the CDC ACM SET_CONTROL_LINE_STATE request on the AT port in order to receive unsolicited response codes, most recently the Dell Wireless 5808e (which is a re-branded Sierra Wireless EM7355). On the other hand, the Sierra Wireless MC7710 does not seem to need this request, but it was found to work either way. Use this request on the AT port of devices with the Sierra Wireless layout in the qcserial driver. The other modems that were moved to the option driver to work around this can now be moved back. Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: usb_wwan/option: generalize option_send_setup for other driversDavid Ward2015-10-093-40/+40
| | | | | | | | | | | | | | Only the option driver implements the send_setup callback; it uses the SET_CONTROL_LINE_STATE request in CDC ACM to generate DTR/RTS signals on the port. This is not driver-specific though and is needed by other drivers, so move the function to the usb_wwan driver (with formatting tweaks), and replace the callback pointer with a flag that enables the request. Suggested-by: Bjørn Mork <bjorn@mork.no> Suggested-by: Johan Hovold <johan@kernel.org> Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: option: revert introduction of struct option_privateDavid Ward2015-10-091-19/+2
| | | | | | | | | | | | This is a partial, context modified revert of commit e463c6dda8f5 ("USB: option: handle send_setup blacklisting at probe"), which introduced an unnecessary struct option_private for storing the interface number used in option_send_setup. Removing this struct will allow option_send_setup to be generalized for other drivers. Suggested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: io_ti: Remove extra blank lines separating functionsPeter E. Berger2015-10-091-6/+0
| | | | | | | | Remove extra blank lines in the several places where functions were separated by more than one. Signed-off-by: Peter E. Berger <pberger@brimson.com> Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: io_ti: Fix non-standard comment formattingPeter E. Berger2015-10-091-48/+91
| | | | | | | | Fix non-standard formatting in some of the comments. Signed-off-by: Peter E. Berger <pberger@brimson.com> [johan: minor fixes ] Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: io_ti: Move request_firmware from edge_startup to download_fwPeter E. Berger2015-10-091-26/+30
| | | | | | | Move request_firmware from edge_startup to download_fw. Signed-off-by: Peter E. Berger <pberger@brimson.com> Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: io_ti: Move download and boot mode code out of download_fwPeter E. Berger2015-10-091-167/+195
| | | | | | | | Separate the download and boot mode code from download_fw() into two new helper functions: do_download_mode() and do_boot_mode(). Signed-off-by: Peter E. Berger <pberger@brimson.com> Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: io_ti: Use serial->interface for messages in download_fwPeter E. Berger2015-10-091-1/+1
| | | | | | | Use serial->interface instead of serial->dev for messages in download_fw(). Signed-off-by: Peter E. Berger <pberger@brimson.com> Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: io_ti: Remove obsolete dev parameter from build_i2c_fw_hdrPeter E. Berger2015-10-091-3/+2
| | | | | | | Remove unused "dev" parameter from build_i2c_fw_hdr() and its caller. Signed-off-by: Peter E. Berger <pberger@brimson.com> Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: whiteheat: fix potential null-deref at probeJohan Hovold2015-09-231-0/+31
| | | | | | | | | | | | | | | | | Fix potential null-pointer dereference at probe by making sure that the required endpoints are present. The whiteheat driver assumes there are at least five pairs of bulk endpoints, of which the final pair is used for the "command port". An attempt to bind to an interface with fewer bulk endpoints would currently lead to an oops. Fixes CVE-2015-5257. Reported-by: Moein Ghasemzadeh <moein@istuary.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: option: add ZTE PIDsLiu.Zhao2015-09-141-0/+24
| | | | | | | | | This is intended to add ZTE device PIDs on kernel. Signed-off-by: Liu.Zhao <lzsos369@163.com> Cc: stable <stable@vger.kernel.org> [johan: sort the new entries ] Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: qcserial: add HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G ModuleDavid Ward2015-08-181-0/+1
| | | | | | | | | | This is an HP-branded Sierra Wireless EM7355: https://bugzilla.redhat.com/show_bug.cgi?id=1223646#c2 Signed-off-by: David Ward <david.ward@ll.mit.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ftdi_sio: Added custom PID for CustomWare productsMatthijs Kooijman2015-08-182-0/+12
| | | | | | | | | | CustomWare uses the FTDI VID with custom PIDs for their ShipModul MiniPlex products. Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: usb_wwan: silence read errors on disconnectJohan Hovold2015-08-181-1/+1
| | | | | | | Silence read-urb resubmission errors when the device is going away. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: option: silence interrupt errorsJohan Hovold2015-08-181-1/+1
| | | | | | | | | Avoid spamming the logs (e.g. with -EPROTO errors) when attempting to resubmit the interrupt urb while a disconnect of an in-use device is being processed. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: symbolserial: Correct transferred data sizePhilipp Hachtmann2015-08-181-10/+8
| | | | | | | | | | | | | The scanner (here DS3508) always returns 64 bytes per urb buffer. The first byte indicates the data length used in the current buffer. There even was a comment describing this. But the comment also said that we'll send everything in the buffer to the tty layer. That means sending the actual barcode data and lots of trailing zeroes. This patch lets the driver only send the real data. Signed-off-by: Philipp Hachtmann <hachti@hachti.de> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: symbolserial: Use usb_get_serial_port_dataPhilipp Hachtmann2015-08-181-3/+3
| | | | | | | | | | | | | The driver used usb_get_serial_data(port->serial) which compiled but resulted in a NULL pointer being returned (and subsequently used). I did not go deeper into this but I guess this is a regression. Signed-off-by: Philipp Hachtmann <hachti@hachti.de> Fixes: a85796ee5149 ("USB: symbolserial: move private-data allocation to port_probe") Cc: stable <stable@vger.kernel.org> # v3.10 Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-serial-4.3-rc1' of ↵Greg Kroah-Hartman2015-08-173-76/+240
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for v4.3-rc1 Here's a fix for a long-standing issue with the pl2303 divisor calculations that affects some non-standard baudrates that were enabled in v3.18. Adding support for newer Edgeport devices and firmware required changes to the io_ti driver and also exposed some issues with the driver's current firmware handling. Included is also a URL comment-typo fix. Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: io_ti: Add heartbeat to keep idle EP/416 ports from disconnectingPeter E. Berger2015-07-311-1/+94
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When using Edgeport/416 models with newer firmware (sometime after firmware version 4.80.0), idle ports are automatically bounced (disconnected and then reconnected) approximately every 60 seconds. This breaks programs (e.g: minicom) where idle periods are common, normal and expected. I confirmed with the manufacturer (Digi International) that Edgeport/416 models now ship from the factory with firmware that expects periodic "heartbeat" queries from the driver to keep idle ports alive. This patch implements heartbeat support using the mechanism Digi suggested (periodically requesting an I2C descriptor address) that appears effective on Edgeports running the newer firmware (that require it) and benign on Edgeport devices running older firmware. Since we know that Edgeport firmware version 4.80 (the version distributed in /lib/firmware/down3.bin and used for Edgeports that are either running still older versions or have no onboard non-volatile firmware image) does not require heartbeat support, this patch schedules heartbeats only on Edgeport/416 devices, and only if they are running firmware versions newer than 4.80. Signed-off-by: Peter E. Berger <pberger@brimson.com> [johan: minor style changes ] Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: io_ti: Add firmware image sanity checksPeter E. Berger2015-07-311-4/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do what we can to verify that the driver's firmware image is valid (before attempting to download it to the Edgeport) by adding a new function, check_fw_sanity(), and a call to it in in download_fw(). Note: It looks like some Edgeports (models like the EP/416 with on-board E2PROM) may be able to function even if the on-disk firmware image is bad or missing, iff their local E2PROM versions are valid. But most Edgeport models (I've tried EP/1 and EP/8) do not appear to have this capability and they always rely on the on-disk firmware image. I tested an implementation that calls the new check_fw_sanity() function at the top of download_fw() and, rather than simply returning an error if the firmware image is bad or missing, it saves the result and defers the decision until later when it may find that it is running on a E2PROM-equipped device with a valid image. But I think this is messier than it is worth (adding still more messiness to the already very messy download_fw()) for such a marginal possible benefit. So, at least for now, I have chosen the much simpler approach of returning an error whenever edge_startup() fails to load an on-disk firmware image, or check_fw_sanity() indicates that it is unusable. Signed-off-by: Peter E. Berger <pberger@brimson.com> [johan: drop redundant checksum mask ] Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: io_ti: Fix firmware version handlingPeter E. Berger2015-07-311-49/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The io_ti driver fails to download firmware to Edgeport devices such as the EP/416, even when the on-disk firmware image (/lib/firmware/edgeport/down3.bin) is more current than the version on the EP/416. The current download code is broken in a few ways. Notably it mis-uses global variables OperationalMajorVersion and OperationalMinorVersion (reading their values before they've been properly initialized and subsequently initializing them multiple times without synchronization). This patch drops the global variables and replaces the redundant calls to request_firmware()/release_firmware() in download_fw() with a single call pair in edge_startup(); the firmware image pointer is then passed to download_fw() and build_i2c_fw_hdr(). Signed-off-by: Peter E. Berger <pberger@brimson.com> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: io_ti: Increase insufficient timeout for firmware downloadsPeter E. Berger2015-07-311-16/+22
| | | | | | | | | | | | | | | | | | | | | | The io_ti driver fails to download firmware to Edgeport devices such as the EP/416 and EP/421 (devices with on-board E2PROM). One of the problems is that the default 1 second timeout in ti_vsend_sync() is insufficient for download operations. This patch increases the download timeout to 10 seconds. Signed-off-by: Peter E. Berger <pberger@brimson.com> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: pl2303: fix baud-rate divisor calculationsMichał Pecio2015-07-301-9/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit fixes the following issues: 1. The 9th bit of buf was believed to be the LSB of divisor's exponent, but the hardware interprets it as MSB (9th bit) of the mantissa. The exponent is actually one bit shorter and applies to base 4, not 2 as previously believed. 2. Loop iterations doubled the exponent instead of incrementing. 3. The exponent wasn't checked for overflow. 4. The function returned requested rate instead of actual rate. Due to issue #2, the old code deviated from the wrong formula described in #1 and actually yielded correct rates when divisor was lower than 4096 by using exponents of 0, 2 or 4 base-2, interpreted as 0, 1, 2 base-4 with the 9th mantissa bit clear. However, at 93.75 kbaud or less the rate turned out too slow due to #2 or too fast due to #2 and #3. I tested this patch by sending and validating 0x00,0x01,..,0xff to an FTDI dongle at 234, 987, 2401, 9601, 31415, 115199, 250k, 500k, 750k, 1M, 1.5M, 3M+1 baud. All rates passed. I also used pv to check speed at some rates unsupported by FTDI: 45 (the lowest possible), 2M, 4M, 5M and 6M-1. Looked sane. Signed-off-by: Michal Pecio <michal.pecio@gmail.com> Fixes: 399aa9a75ad3 ("USB: pl2303: use divisors for unsupported baud rates") Cc: stable <stable@vger.kernel.org> # v3.18 [johan: update summary ] Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: ftdi_sio: Fix broken URL in commentNik Nyby2015-07-201-1/+1
| | | | | | | | | | | | | | This fixes a typo in the URL: http://zeitcontrol.de/ Signed-off-by: Nik Nyby <nikolas@gnu.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* | Merge 4.2-rc6 into usb-nextGreg Kroah-Hartman2015-08-103-1/+4
|\ \ | | | | | | | | | | | | | | | We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | USB: sierra: add 1199:68AB device IDDirk Behme2015-07-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the Sierra Wireless AR8550 device with USB descriptor 0x1199, 0x68AB. It is common with MC879x modules 1199:683c/683d which also are composite devices with 7 interfaces (0..6) and also MDM62xx based as the AR8550. The major difference are only the interface attributes 02/02/01 on interfaces 3 and 4 on the AR8550. They are vendor specific ff/ff/ff on MC879x modules. lsusb reports: Bus 001 Device 004: ID 1199:68ab Sierra Wireless, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1199 Sierra Wireless, Inc. idProduct 0x68ab bcdDevice 0.06 iManufacturer 3 Sierra Wireless, Incorporated iProduct 2 AR8550 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 198 bNumInterfaces 7 bConfigurationValue 1 iConfiguration 1 Sierra Configuration bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x06 EP 6 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 6 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8a EP 10 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8b EP 11 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x07 EP 7 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Cc: Lars Melin <larsm17@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * | USB: qcserial: Add support for Dell Wireless 5809e 4G ModemPieter Hollants2015-07-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added the USB IDs 0x413c:0x81b1 for the "Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card", a Dell-branded Sierra Wireless EM7305 LTE card in M.2 form factor, used eg. in Dell's Latitude E7540 Notebook series. "lsusb -v" output for this device: Bus 002 Device 003: ID 413c:81b1 Dell Computer Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x413c Dell Computer Corp. idProduct 0x81b1 bcdDevice 0.06 iManufacturer 1 Sierra Wireless, Incorporated iProduct 2 Dell Wireless 5809e Gobi™ 4G LTE Mobile Broadband Card iSerial 3 bNumConfigurations 2 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 204 bNumInterfaces 4 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000c 1x 12 bytes bInterval 9 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000c 1x 12 bytes bInterval 9 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 8 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 ** UNRECOGNIZED: 2c ff 42 49 53 54 00 01 07 f5 40 f6 00 00 00 00 01 f7 c4 09 02 f8 c4 09 03 f9 88 13 04 fa 10 27 05 fb 10 27 06 fc c4 09 07 fd c4 09 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 95 bNumInterfaces 2 bConfigurationValue 2 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 500mA Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 12 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 14 bFunctionProtocol 0 iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 12 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 14 bInterfaceProtocol 0 iInterface 0 CDC Header: bcdCDC 1.10 CDC Union: bMasterInterface 12 bSlaveInterface 13 CDC MBIM: bcdMBIMVersion 1.00 wMaxControlMessage 4096 bNumberFilters 32 bMaxFilterSize 128 wMaxSegmentSize 1500 bmNetworkCapabilities 0x20 8-byte ntb input size CDC MBIM Extended: bcdMBIMExtendedVersion 1.00 bMaxOutstandingCommandMessages 64 wMTU 1500 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 9 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 13 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 2 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 13 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 2 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 2 Device Status: 0x0000 (Bus Powered) Signed-off-by: Pieter Hollants <pieter@hollants.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * | USB: qcserial/option: make AT URCs work for Sierra Wireless MC7305/MC7355Reinhard Speyerer2015-07-202-1/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | Tests with a Sierra Wireless MC7355 have shown that 1199:9041 devices also require the option_send_setup() code to be used on the USB interface for the AT port to make unsolicited response codes work correctly. Move these devices from the qcserial driver to the option driver like it has been done for the 1199:68c0 devices in commit d80c0d14183516f184a5ac88e11008ee4c7d2a2e ("USB: qcserial/option: make AT URCs work for Sierra Wireless MC73xx"). Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* | usb: serial: mxuport: Simplify return statementSaurabh Karajgaonkar2015-08-051-7/+3
|/ | | | | | | Replace redundant variable use in return statement. Signed-off-by: Saurabh Karajgaonkar <skarajga@visteon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: Destroy serial_minors IDR on module exitJohannes Thumshirn2015-07-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Destroy serial_minors IDR on module exit, reclaiming the allocated memory. This was detected by the following semantic patch (written by Luis Rodriguez <mcgrof@suse.com>) <SmPL> @ defines_module_init @ declarer name module_init, module_exit; declarer name DEFINE_IDR; identifier init; @@ module_init(init); @ defines_module_exit @ identifier exit; @@ module_exit(exit); @ declares_idr depends on defines_module_init && defines_module_exit @ identifier idr; @@ DEFINE_IDR(idr); @ on_exit_calls_destroy depends on declares_idr && defines_module_exit @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... idr_destroy(&idr); ... } @ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... +idr_destroy(&idr); } </SmPL> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: stable <stable@vger.kernel.org> # v3.11 Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: cp210x: add ID for Aruba Networks controllersPeter Sanford2015-07-061-0/+1
| | | | | | | | | Add the USB serial console device ID for Aruba Networks 7xxx series controllers which have a USB port for their serial console. Signed-off-by: Peter Sanford <peter@sanford.io> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: mos7720: rename registersSudip Mukherjee2015-07-061-115/+138
| | | | | | | | | | | Some of the register names defined here are matching with registers defined in other places. Like DCR is defined here and DCR is also a register in mn10300 architecture. So when we are building this with mn10300, build fails. To avoid we rename all the registers. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: option: add 2020:4000 IDClaudio Cappelli2015-07-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Add device Olivetti Olicard 300 (Network Connect: MT6225) - IDs 2020:4000. T: Bus=01 Lev=02 Prnt=04 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2020 ProdID=4000 Rev=03.00 S: Manufacturer=Network Connect S: Product=MT6225 C: #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Signed-off-by: Claudio Cappelli <claudio.cappelli.linux@gmail.com> Suggested-by: Lars Melin <larsm17@gmail.com> Cc: stable <stable@vger.kernel.org> [johan: amend commit message with devices info ] Signed-off-by: Johan Hovold <johan@kernel.org>
* Merge tag 'usb-4.2-rc1' of ↵Linus Torvalds2015-06-261-7/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here's the big USB patchset for 4.2-rc1. As is normal these days, the majority of changes are in the gadget drivers, with a bunch of other small driver changes. All of these have been in linux-next with no reported issues" * tag 'usb-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (175 commits) usb: dwc3: Use ASCII space in Kconfig usb: chipidea: add work-around for Marvell HSIC PHY startup usb: chipidea: allow multiple instances to use default ci_default_pdata dt-bindings: Consolidate ChipIdea USB ci13xxx bindings phy: add Marvell HSIC 28nm PHY phy: Add Marvell USB 2.0 OTG 28nm PHY dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings USB: ssb: use devm_kzalloc USB: ssb: fix error handling in ssb_hcd_create_pdev() usb: isp1760: check for null return from kzalloc cdc-acm: Add support of ATOL FPrint fiscal printers usb: chipidea: usbmisc_imx: Remove unneeded semicolon USB: usbtmc: add device quirk for Rigol DS6104 USB: serial: mos7840: Use setup_timer phy: twl4030-usb: add ABI documentation phy: twl4030-usb: remove incorrect pm_runtime_get_sync() in probe function. phy: twl4030-usb: remove pointless 'suspended' test in 'suspend' callback. phy: twl4030-usb: make runtime pm more reliable. drivers:usb:fsl: Fix compilation error for fsl ehci drv usb: renesas_usbhs: Don't disable the pipe if Control write status stage ...
| * Merge 4.1-rc7 into usb-nextGreg Kroah-Hartman2015-06-083-0/+3
| |\ | | | | | | | | | | | | | | | | | | This resolves a merge issue in musb_core.c and we want the fixes that were in Linus's tree in this branch as well for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | USB: serial: mos7840: Use setup_timerVaishali Thakkar2015-06-011-7/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the timer API function setup_timer instead of structure field assignments to initialize a timer. A simplified version of the Coccinelle semantic patch that performs this transformation is as follows: @change@ expression e1, e2, e3, e4, a, b; @@ -init_timer(&e1); +setup_timer(&e1, a, b); ... when != a = e2 when != b = e3 -e1.function = a; ... when != b = e4 -e1.data = b; Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
* | | Merge branch 'for-linus' of ↵Linus Torvalds2015-06-231-1/+1
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "As usual, mostly comment, kerneldoc and printk() fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: lpfc: Grammar s/an negative/a negative/ ARM: lib/lib1funcs.S: fix typo s/substractions/subtractions/ cx25821: cx25821-medusa-reg.h: fix 0x0x prefix lib: crc-itu-t.[ch] fix 0x0x prefix in integer constants rapidio: Fix kerneldoc and comment qla4xxx: Fix printk() in qla4_83xx_read_reset_template() and qla4_83xx_pre_loopback_config() treewide: Kconfig: fix wording / spelling usb/serial: fix grammar in Kconfig help text for FTDI_SIO megaraid_sas: fix kerneldoc netfilter: ebtables: fix comment grammar drm/radeon: fix comment isdn: fix grammar in comment ARM: KVM: fix comment
| * | usb/serial: fix grammar in Kconfig help text for FTDI_SIOPaul Gortmaker2015-05-261-1/+1
| | | | | | | | | | | | | | | Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | USB: cp210x: add ID for HubZ dual ZigBee and Z-Wave dongleJohn D. Blair2015-06-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Added the USB serial device ID for the HubZ dual ZigBee and Z-Wave radio dongle. Signed-off-by: John D. Blair <johnb@candicontrols.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* | | USB: serial: ftdi_sio: Add support for a Motion Tracker Development BoardPatrick Riphagen2015-05-212-0/+2
| |/ |/| | | | | | | | | | | | | | | This adds support for new Xsens device, Motion Tracker Development Board, using Xsens' own Vendor ID Signed-off-by: Patrick Riphagen <patrick.riphagen@xsens.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
* | USB: visor: Match I330 phone more preciselyJason A. Donenfeld2015-04-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Samsung has just released a portable USB3 SSD, coming in a very small and nice form factor. It's USB ID is 04e8:8001, which unfortunately is already used by the Palm Visor driver for the Samsung I330 phone cradle. Having pl2303 or visor pick up this device ID results in conflicts with the usb-storage driver, which handles the newly released portable USB3 SSD. To work around this conflict, I've dug up a mailing list post [1] from a long time ago, in which a user posts the full USB descriptor information. The most specific value in this appears to be the interface class, which has value 255 (0xff). Since usb-storage requires an interface class of 0x8, I believe it's correct to disambiguate the two devices by matching on 0xff inside visor. [1] http://permalink.gmane.org/gmane.linux.usb.user/4264 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* | USB: pl2303: Remove support for Samsung I330Jason A. Donenfeld2015-04-292-5/+0
| | | | | | | | | | | | | | | | | | This phone is already supported by the visor driver. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* | USB: cp210x: add ID for KCF Technologies PRN deviceMark Edwards2015-04-291-0/+1
| | | | | | | | | | | | | | | | | | Added the USB serial console device ID for KCF Technologies PRN device which has a USB port for its serial console. Signed-off-by: Mark Edwards <sonofaforester@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* | Merge 4.0-rc7 into usb-nextGreg Kroah-Hartman2015-04-073-2/+16
|\ \ | | | | | | | | | | | | | | | We want the fixes in here, and to help resolve merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | USB: ftdi_sio: Use jtag quirk for SNAP Connect E10Doug Goldstein2015-03-251-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch uses the existing CALAO Systems ftdi_8u2232c_probe in order to avoid attaching a TTY to the JTAG port as this board is based on the CALAO Systems reference design and needs the same fix up. Signed-off-by: Doug Goldstein <cardoe@cardoe.com> CC: stable <stable@vger.kernel.org> [johan: clean up probe logic ] Signed-off-by: Johan Hovold <johan@kernel.org>
| * | USB: keyspan_pda: add new device idNathaniel W Filardo2015-03-191-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add USB VID/PID for Xircom PGMFHUB USB/serial component. (The hub and SCSI bridge on that hardware are recognized out of the box by existing drivers.) Tested VID/PID using new_id and loopback connection and was met with success, but that's all the testing done. Signed-off-by: Nathaniel Wesley Filardo <nwf@cs.jhu.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
OpenPOWER on IntegriCloud