summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/iscsi_tcp.c
Commit message (Collapse)AuthorAgeFilesLines
* [SCSI] libiscsi, iscsi_tcp, ib_iser: fix setting of can_queue with old tools.Mike Christie2008-07-121-1/+0
| | | | | | | | | | | | | | | | | | | This patch fixes two bugs that are related. 1. Old tools did not set can_queue/cmds_max. This patch modifies libiscsi so that when we add the host we catch this and set it to the default. 2. iscsi_tcp thought that the scsi command that was passed to the eh functions needed a iscsi_cmd_task allocated for it. It only needed a mgmt task, and now it does not matter since it all comes from the same pool and libiscsi handles this for the drivers. ib_iser had copied iscsi_tcp's code and set can_queue to its max - 1 to handle this. So this patch removes the max -1, and just sets it to the max. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi_tcp: Enable any size commandBoaz Harrosh2008-07-121-1/+1
| | | | | | | | | | | Let through upto the largest command of 260 defined by the scsi standard. iscsi core supports this already. Now that the scsi-ml supports it we can start using large commands. [jejb:rejections fixed up] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] Replace __FUNCTION__ with __func__ in iscsi_tcp.Harvey Harrison2008-07-121-6/+6
| | | | | | | | | | __FUNCTION__ is gcc-specific, use __func__ (Update diff by Mike Christie) Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] libiscsi, iser, tcp: remove recv_lockMike Christie2008-07-121-34/+39
| | | | | | | | | | | | | | | | | | | The recv lock was defined so the iscsi layer could block the recv path from processing IO during recovery. It turns out iser just set a lock to that pointer which was pointless. We now disconnect the transport connection before doing recovery so we do not need the recv lock. For iscsi_tcp we still stop the recv path incase older tools are being used. This patch also has iscsi_itt_to_ctask user grab the session lock and has the caller access the task with the lock or get a ref to it in case the target is broken and sends a tmf success response then sends data or a response for the command that was supposed to be affected bty the tmf. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi class: Add session initiatorname and ifacename sysfs attrs.Mike Christie2008-07-121-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | This adds two new attrs used for creating initiator ports and binding sessions to hardware. The session level initiatorname: Since bnx2i does a scsi_host per host device, we need to add the iface initiator port settings on the session, so we can create multiple initiator ports (each with different inames) per device/scsi_host. The current iname reflects that qla4xxx can have one iname per hba, and we are allocating a host per session for software. The iname on the host will remain so we can export and set the hba level qla4xxx setting. The ifacename attr: To bind a session to a some peice of hardware in userspace we maintain some mappings, but during boot or iscsid restart (iscsid contains the user space part of the driver) we need to be able to figure out which of those host mappings abstractions maps to certain sessions. This patch adds a ifacename attr, which userspace can set to id the host side of the endpoint across pivot_roots and iscsid restarts. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi_tcp: hook iscsi_tcp into iscsi_endpoint codeMike Christie2008-07-121-4/+4
| | | | | | | | | iscsi_tcp creates its ep in userspace using sockets because it is virtual, so we just check if we are sent a ep and fail if we are. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi class: user device_for_each_child instead of duplicating ↵Mike Christie2008-07-121-1/+1
| | | | | | | | | | | | | session list Currently we duplicate the list of sessions, because we were using the test for if a session was on the host list to indicate if the session was bound or unbound. We can instead use the target_id and fix up the class so that drivers like bnx2i do not have to manage the target id space. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi_tcp: handle iscsi_cmd_task renameMike Christie2008-07-121-131/+131
| | | | | | | This converts iscsi_tcp to use the iscsi_task name. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi_tcp: convert iscsi_tcp to support merged tasksMike Christie2008-07-121-76/+54
| | | | | | | Convert iscsi_tcp to support merged tasks. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] libiscsi, iscsi_tcp, iser: add session cmds array accessorMike Christie2008-07-121-4/+9
| | | | | | | | | | | Currently to get a ctask from the session cmd array, you have to know to use the itt modifier. To make this easier on LLDs and so in the future we can easilly kill the session array and use the host shared map instead, this patch adds a nice wrapper to strip the itt into a session->cmds index and return a ctask. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi: remove session/conn_data_size from iscsi_transportMike Christie2008-07-121-14/+5
| | | | | | | | | This removes the session and conn data_size fields from the iscsi_transport. Just pass in the value like with host allocation. This patch also makes it so the LLD iscsi_conn data is allocated with the iscsi_cls_conn. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi: add iscsi host helpersMike Christie2008-07-121-11/+7
| | | | | | | | This finishes the host/session unbinding, by adding some helpers to add and remove hosts and the session they manage. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi: remove session and host binding in libiscsiMike Christie2008-07-121-45/+57
| | | | | | | | | | | bnx2i allocates a host per netdevice but will use libiscsi, so this unbinds the session from the host in that code. This will also be useful for the iser parent device dma settings fixes. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi class, iscsi drivers: remove unused iscsi_transport attrsMike Christie2008-07-121-2/+0
| | | | | | | | | max_cmd_len and max_conn are not really used. max_cmd_len is always 16 and can be set by the LLD. max_conn is always one since we do not support MCS. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi class, iscsi_tcp/iser: add host arg to session creationMike Christie2008-07-121-2/+3
| | | | | | | | | | | | | iscsi offload (bnx2i and qla4xx) allocate a scsi host per hba, so the session creation path needs a shost/host_no argument. Software iscsi/iser will follow the same behabior as before where it allcoates a host per session, but in the future iser will probably look more like bnx2i where the host's parent is the hardware (rnic for iser and for bnx2i it is the nic), because it does not use a socket layer like how iscsi_tcp does. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi: bidi support for iscsi_tcpBoaz Harrosh2008-04-181-14/+17
| | | | | | | | | | access the right scsi_in() and/or scsi_out() side of things. also for resid Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Reviewed-by: Pete Wyckoff <pw@osc.edu> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi: fix up iscsi printk prefixMike Christie2008-02-071-27/+30
| | | | | | | | | | | | Some iscsi class messages have the dev_printk prefix and some libiscsi and iscsi_tcp messages have "iscsi" or the module name as a prefix which is normally pretty useless when trying to figure out which session or connection the message is attached to. This patch adds iscsi lib and class dev_printks so all messages have a common prefix that can be used to figure out which object printed it. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] remove use_sg_chainingJames Bottomley2008-01-301-1/+0
| | | | | | | | | | | With the sg table code, every SCSI driver is now either chain capable or broken (or has sg_tablesize set so chaining is never activated), so there's no need to have a check in the host template. Also tidy up the code by moving the scatterlist size defines into the SCSI includes and permit the last entry of the scatterlist pools not to be a power of two. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi_tcp: fix setting of r2tMike Christie2008-01-111-3/+3
| | | | | | | | | | If we negotiate for X r2ts we have to use only X r2ts. We cannot round up (we could send less though). It is ok to fail if it is not something the driver can handle, so this patch just does that. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi_tcp: hold lock during data rsp processingMike Christie2008-01-111-8/+6
| | | | | | | | iscsi_data_rsp needs to hold the sesison lock when it calls iscsi_update_cmdsn. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi_tcp: enable sg chainingMike Christie2008-01-111-2/+3
| | | | | | | | | | The previous patches converted iscsi_tcp to support sg chaining. This patch sets the proper flags and sets sg_table size to 4096. This allows fs io to be capped at max_sectors, but passthrough IO to be limited by some other part of the kernel. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi_tcp: drop session when itt does not match any commandMike Christie2008-01-111-5/+1
| | | | | | | | | | | A target should never send us a itt that does not match a running task. If it does we do not really know what is coming down after the header, unless we evaluate the hdr and do some guessing sometimes. However, even if we know what is coming we probably do not have buffers for it or we cannot respond (if it is a r2t for example), so just drop the session. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi_tcp: stop leaking r2t_info's when the incoming R2T is badOlaf Kirch2008-01-111-1/+5
| | | | | | | | | | | | | iscsi_r2t_rsp checks the incoming R2T for sanity, and if it thinks it's fishy, it will drop it silently. In this case, we leaked an r2t_info object. If we do this often enough, we run into a BUG_ON some time later. Removed r2t wrappers and update patch by Mike Christie Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi: convert xmit path to iscsi chunksOlaf Kirch2008-01-111-807/+526
| | | | | | | | | | | | | | Convert xmit to iscsi chunks. from michaelc@cs.wisc.edu: Bug fixes, more digest integration, sg chaining conversion and other sg wrapper changes, coding style sync up, and removal of io fields, like pdu_sent, that are not needed. Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] libiscsi: fix nop handlingMike Christie2008-01-111-1/+3
| | | | | | | | | | | | During root boot and shutdown the target could send us nops. At this time iscsid cannot be running, so the target will drop the session and the boot or shutdown will hang. To handle this and allow us to better control when to check the network this patch moves the nop handling to the kernel. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] libiscsi: do not block session during logoutMike Christie2008-01-111-3/+1
| | | | | | | | | There is not need to block the session during logout. Since we are going to fail the commands that were blocked just fail them immediately instead. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] libiscsi, iscsi_tcp: iscsi pool cleanupOlaf Kirch2008-01-111-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | iscsi_pool_init simplified iscsi_pool_init currently has a lot of duplicate kfree() calls it does when some allocation fails. This patch simplifies the code a little by using iscsi_pool_free to tear down the pool in case of an error. iscsi_pool_init also returns a copy of the item array to the caller. Not all callers use this array, so we make it optional. Instead of allocating a second array and return that, allocate just one array, of twice the size. Update users of iscsi_pool_{init,free} This patch drops the (now useless) second argument to iscsi_pool_free, and updates all callers. It also removes the ctask->r2ts array, which was never used anyway. Since the items argument to iscsi_pool_init is now optional, we can pass NULL instead. Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi_tcp, libiscsi: initial AHS SupportBoaz Harrosh2008-01-111-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | at libiscsi generic code - currently code assumes a storage space of pdu header is allocated at llds ctask and is pointed to by iscsi_cmd_task->hdr. Here I add a hdr_max field pertaining to that storage, and an hdr_len that accumulates the current use of the pdu-header. - Add an iscsi_next_hdr() inline which returns the next free space to write new Header at. Also iscsi_next_hdr() is used to retrieve the address at which to write the header-digest. - Add iscsi_add_hdr(length). What the user do is calls iscsi_next_hdr() for address of the new header, than calls iscsi_add_hdr(length) with the size of the new header. iscsi_add_hdr() will check if space is available and update to the new size. length must be padded according to standard. - Add 2 padding inline helpers thanks to Olaf. Current patch does not use them but Following patches will. Also moved definition of ISCSI_PAD_LEN to iscsi_proto.h which had PAD_WORD_LEN that was never used anywhere. - Let iscsi_prep_scsi_cmd_pdu() signal an Error return since now it is possible that it will fail. - I was tired of yet again writing a "this is a digest" comment next to sizeof(__u32) so I defined a new ISCSI_DIGEST_SIZE. Now I don't need any comments. Changed all places that used sizeof(__u32) or "4" in connection to a digest. iscsi_tcp specific code - At struct iscsi_tcp_cmd_task allocate maximum space allowed in standard for all headers following the iscsi_cmd header. and mark it so in iscsi_tcp_session_create() - At iscsi_send_cmd_hdr() retrieve the correct headers size and write header digest at iscsi_next_hdr(). Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi: Prettify resid handling and some extra checksBoaz Harrosh2008-01-111-9/+7
| | | | | | | | | | | | - Check to see that OVERFLOW is not negative indicating a bug. - Unify handling of UNDERFLOW and OVERFLOW to the same code. - Also handle BIDI_OVERFLOW. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi_tcp: rewrite recv pathOlaf Kirch2008-01-111-511/+507
| | | | | | | | | | | | Rewrite recv path. Fixes: - data digest processing and error handling. - ahs support. Some fixups by Mike Christie Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] libiscsi, iscsi_tcp: add device supportMike Christie2008-01-111-75/+76
| | | | | | | | | | | This patch adds logical unit reset support. This should work for ib_iser, but I have not finished testing that driver so it is not hooked in yet. This patch also temporarily reverts the iscsi_tcp r2t write out patch. That code is completely rewritten in this patchset. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi_tcp: fix potential lockup with write commandsTony Battersby2007-11-141-70/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a race condition in iscsi_tcp.c that may cause it to forget that it received a R2T from the target. This race may cause a data-out command (such as a write) to lock up. The race occurs here: static int iscsi_send_unsol_pdu(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) { struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; int rc; if (tcp_ctask->xmstate & XMSTATE_UNS_HDR) { BUG_ON(!ctask->unsol_count); tcp_ctask->xmstate &= ~XMSTATE_UNS_HDR; <---- RACE ... static int iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) { ... tcp_ctask->xmstate |= XMSTATE_SOL_HDR_INIT; <---- RACE ... While iscsi_xmitworker() (called from scsi_queue_work()) is preparing to send unsolicited data, iscsi_tcp_data_recv() (called from tcp_read_sock()) interrupts it upon receipt of a R2T from the target. Both contexts do read-modify-write of tcp_ctask->xmstate. Usually, gcc on x86 will make &= and |= atomic on UP (not guaranteed of course), but in this case iscsi_send_unsol_pdu() reads the value of xmstate before clearing the bit, which causes gcc to read xmstate into a CPU register, test it, clear the bit, and then store it back to memory. If the recv interrupt happens during this sequence, then the XMSTATE_SOL_HDR_INIT bit set by the recv interrupt will be lost, and the R2T will be forgotten. The patch below (against 2.6.24-rc1) converts accesses of xmstate to use set_bit, clear_bit, and test_bit instead of |= and &=. I have tested this patch and verified that it fixes the problem. Another possible approach would be to hold a lock during most of the rx/tx setup and post-processing, and drop the lock only for the actual rx/tx. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [CRYPTO] users: Fix up scatterlist conversion errorsHerbert Xu2007-10-271-3/+2
| | | | | | | | | This patch fixes the errors made in the users of the crypto layer during the sg_init_table conversion. It also adds a few conversions that were missing altogether. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* SG: Change sg_set_page() to take length and offset argumentJens Axboe2007-10-241-3/+1
| | | | | | | | | | Most drivers need to set length and offset as well, so may as well fold those three lines into one. Add sg_assign_page() for those two locations that only needed to set the page, where the offset/length is set outside of the function context. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* [SG] Update drivers to use sg helpersJens Axboe2007-10-221-8/+7
| | | | Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* [SCSI] iscsi_tcp: Turn off bounce buffersMike Christie2007-07-271-0/+1
| | | | | | | | | | | | | It was found by LSI that on setups with large amounts of memory we were bouncing buffers when we did not need to. If the iscsi tcp code touches the data buffer (or a helper does), it will kmap the buffer. iscsi_tcp also does not interact with hardware, so it does not have any hw dma restrictions. This patch sets the bounce buffer settings for our device queue so buffers should not be bounced because of a driver limit. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] iscsi_tcp, ib_iser Enable module refcounting for iscsi host templateMike Christie2007-07-271-0/+1
| | | | | | | | | This prevents the iscsi modules from being unloaded while there are active mounts from an iscsi target. Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* Fix buggered kmalloc() call argument orderAl Viro2007-07-201-1/+1
| | | | | | | Wrong order of arguments Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [SCSI] iscsi_tcp: convert to use the data buffer accessorsFUJITA Tomonori2007-06-171-79/+38
| | | | | | | | | | | | | - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. TODO: use scsi_for_each_sg(). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] iscsi class, iscsi_tcp, iser, qla4xxx: add netdevname sysfs attrMike Christie2007-06-021-1/+2
| | | | | | | | | | | | | | | | | iSCSI must support software iscsi (iscsi_tcp, iser), hardware iscsi (qla4xxx), and partial offload (broadcom). To be able to allow each stack or driver or port (virtual or physical) to be able to log into the same target portal we use the initiator tuple [[HWADDRESS | NETDEVNAME], INITIATOR_NAME] and the target tuple [TARGETNAME, CONN_ADDRESS, CONN_PORT] to id a session. This patch adds the netdev name, which is used by software iscsi when it binds a session to a netdevice using the SO_BINDTODEVICE sock opt. It cannot use HWADDRESS because if someone did vlans then the same netdevice will have the same mac and the initiator,target id will not be unique. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: Roland Dreier <rdreier@cisco.com> Cc: David C Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] iscsi class, qla4xxx, iscsi_tcp: export local addressMike Christie2007-06-021-29/+98
| | | | | | | | | | This patch exports the local address for the session. For qla4xxx this is the ip of the hba's port. For software this is the src addr of the socket. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: David C Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] iscsi_tcp: fix fd leakMike Christie2007-06-021-1/+2
| | | | | | | | | | | This patch should fix the file descriptor leak problem. A quick look through the kernel shows that users of sockfd_lookup use sockfd_put to release their handle. We were using sock_release which from the comments and code look like it does not release the get() on the file from the lookup. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] iscsi_tcp: remove DMA alignment restrictionMike Christie2007-06-021-0/+8
| | | | | | | | | | Add a slave_configure function to iSCSI TCP to remove any DMA alignment restriction. This permits the use of direct IO from arbitrary addresses. Signed-off-by: Pete Wyckoff <pw@osc.edu> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] iscsi_tcp: fix handling of data buffer paddingMike Christie2007-06-021-19/+42
| | | | | | | | | | | | | If we got the padding, data and header in different skbs, we were not handling the padding correctly because we attributed it to the data's skb. This resulted in the initiator reading from pad bytes + skb offset instead of the correct offset. If you could not connect with the open solaris target, this will fix the lock up problem you were hitting. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] libiscsi: make can_queue configurableMike Christie2007-06-021-2/+3
| | | | | | | | | | | | This patch allows us to set can_queue and cmds_per_lun from userspace when we create the session/host. From there we can set it on a per target basis. The patch fully converts iscsi_tcp, but only hooks up ib_iser for cmd_per_lun since it currently has a lots of preallocations based on can_queue. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: Roland Dreier <rdreier@cisco.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] libiscsi: fix iscsi cmdsn allocationMike Christie2007-06-021-27/+6
| | | | | | | | | | | | | | | | | | | | | The cmdsn allocation and pdu transmit code can race, and we can end up sending a pdu with cmdsn 10 before a pdu with 5. The target will then fail the connection/session. This patch fixes the problem by delaying the cmdsn allocation until we are about to send the pdu. This also removes the xmitmutex. We were using the connection xmitmutex during error handling to handle races with mtask and ctask cleanup and completion. For ctasks we now have nice refcounting and for the mtask, if we hit the case where the mtask timesout and it is floating around somewhere in the driver, we end up dropping the session. And to handle session level cleanup, we use the xmit suspend bit along with scsi_flush_queue and the session lock to make sure that the xmit thread is not possibly transmitting a task while we are trying to kill it. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: Roland Dreier <rdreier@cisco.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] iscsi tcp: fix iscsi xmit state machineMike Christie2007-06-011-113/+145
| | | | | | | | | | If iscsi_tcp partially sends a header, it would recalculate the header size and readd the size of the digest (if header digests are used).This would cause us to send sizeof(digest) extra bytes when we sent the rest of the header. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] iscsi class, iscsi_tcp, ib_iser: add sysfs chap fileMike Christie2007-06-011-2/+3
| | | | | | | | | | | | | | The attached patches add sysfs files for the chap settings to the iscsi transport class, iscsi_tcp and ib_iser. This is needed for software iscsi because there are times when iscsid can die and it will need to reread the values it was using. And it is needed by qla4xxx for basic management opertaions. This patch does not hook in qla4xxx yet, because I am not sure the mbx command to use. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: Roland Dreier <rdreier@cisco.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] iscsi: Some fixes in preparation for bidirectional support - total_lengthMike Christie2007-06-011-9/+12
| | | | | | | | | | | | | - Remove shadow of request length from struct iscsi_cmd_task. - change all users to use scsi_cmnd->request_bufflen directly (With bidi we will use scsi-ml API to retrieve in/out length) Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: Roland Dreier <rdreier@cisco.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] iscsi: Some fixes in preparation for bidirectional support - exp_datasnMike Christie2007-06-011-7/+11
| | | | | | | | | | | | | | | | This patch fixes handling of expected datasn/r2tsn as received from target. It is done according to: T10 rfc3720 section 3.2.2.3. Data Sequencing. . unify expected datasn/r2tsn into one counter . calculate than check expected datasn/r2tsn. On error print a message and fail the request. (TODO use iscsi retransmits) . remove the FIXME ;) . avoid zero length memset Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
OpenPOWER on IntegriCloud