summaryrefslogtreecommitdiffstats
path: root/drivers/phy
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'armsoc-soc' of ↵Linus Torvalds2018-04-051-7/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "This release brings up a new platform based on the old ARM9 core: the Nuvoton NPCM is used as a baseboard management controller, competing with the better known ASpeed AST2xx series. Another important change is the addition of ARMv7-A based chips in mach-stm32. The older parts in this platform are ARMv7-M based microcontrollers, now they are expanding to general-purpose workloads. The other changes are the usual defconfig updates to enable additional drivers, lesser bugfixes. The largest updates as often are the ongoing OMAP cleanups, but we also have a number of changes for the older PXA and davinci platforms this time. For the Renesas shmobile/r-car platform, some new infrastructure is needed to make the watchdog work correctly. Supporting Multiprocessing on Allwinner A80 required a significant amount of new code, but is not doing anything unexpected" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (179 commits) arm: npcm: modify configuration for the NPCM7xx BMC. MAINTAINERS: update entry for ARM/berlin ARM: omap2: fix am43xx build without L2X0 ARM: davinci: da8xx: simplify CFGCHIP regmap_config ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data ARM: multi_v7_defconfig: add NXP FlexCAN IP support ARM: multi_v7_defconfig: enable thermal driver for i.MX devices ARM: multi_v7_defconfig: add RN5T618 PMIC family support ARM: multi_v7_defconfig: add NXP graphics drivers ARM: multi_v7_defconfig: add GPMI NAND controller support ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs ARM: multi_v7_defconfig: configure I2C driver built-in arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE ARM: imx: fix imx6sll-only build ARM: imx: select ARM_CPU_SUSPEND for CPU_IDLE as well ARM: mxs_defconfig: Re-sync defconfig ARM: imx_v4_v5_defconfig: Use the generic fsl-asoc-card driver ARM: imx_v4_v5_defconfig: Re-sync defconfig arm64: defconfig: enable stmmac ethernet to defconfig ARM: EXYNOS: Simplify code in coupled CPU idle hot path ...
| * ARM: da8xx: use platform data for CFGCHIP syscon regmapDavid Lechner2018-02-191-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts from using a platform device for the CFGCHIP syscon regmap to using platform data to pass the regmap to consumers. A lazy getter function is used so that the regmap will only be created if it is actually used. This function will also be used in the clock init when we convert to the common clock framework. The USB PHY driver is currently the only consumer. This driver is updated to use platform data to get the CFGCHIP regmap instead of syscon_regmap_lookup_by_pdevname(). Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
| * phy: da8xx-usb: rename clock con_idsDavid Lechner2018-02-121-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | This renames the clock con_ids in the DA8XX USB PHY driver as well as the matching names in the mach clock registration code. This is in preparation for using device tree clocks where these names will become part of the device tree bindings. The new names more closely match the names used in the USB clock diagram in the SoC TRM. Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
* | Merge tag 'phy-for-4.17' of ↵Greg Kroah-Hartman2018-03-2030-394/+3153
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next Kishon writes: phy: for 4.17 *) Add USB PHY driver for MDM6600 on Droid *) Add USB PHY driver for STM32 USB PHY Controller *) Add inno-usb2-phy driver for hi3798cv200 SoC *) Add combo phy driver (SATA/USB/PCIE) for HiSilicon STB SoCs *) Add USB3 PHY driver for Meson GXL and GXM *) Add support for R8A77965 Gen3 USB 2.0 PHY in phy-rcar-gen3-usb2 driver *) Add support for qualcomm QUSB2 V2 and QMP V3 USB3 PHY in phy-qcom-qusb2 and phy-qcom-qmp PHY driver respectively *) Add support for runtime PM in phy-qcom-qusb2 and phy-qcom-qmp PHY drivers *) Add support for Allwinner R40 USB PHY in sun4i-usb PHY driver *) Add support in rockchip-typec PHY driver to make extcon optional and fallback to working in host mode if extcon is missing *) Add support in rockchip-typec PHY driver to mux PHYs connected to DP *) Add support to configure slew rate parameters in phy-mtk-tphy PHY driver *) Add workaround for missing Vbus det interrupts on Allwinner A23/A33 *) Add USB speed related PHY modes in phy core *) Fix PHY 'structure' documentation *) Force rockchip-typec PHY to USB2 if DP-only mode is used *) Fix phy-qcom-qusb2 and phy-qcom-qmp PHY drivers to follow PHY reset and initialization sequence as per hardware programming manual *) Fix Marvell BG2CD SoC USB failure in phy-berlin-usb driver *) Minor fixes in lpc18xx-usb-otg, xusb-tegra210 and phy-rockchip-emmc PHY drivers Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: tegra: xusb: Uncomment register writeThierry Reding2018-03-161-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The reason why this was originally commented out is no longer clear. The UPHY driver for SATA works fine with or without this change. The reset value of the XDIGCLK_EN bit is 0, so unless programmed by the bootloader this shouldn't make a difference anyway. Define a macro for this bit and uncomment the code. This also fixes a coverity issue brought to my attention by Rohith because not only is the XDIGCLK_EN field modification commented out, but also the register write which causes none of the earlier modifications of the register value to be written to the register and the value being overwritten. Reported-by: Rohith Seelaboyina <rseelaboyina@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: rockchip-typec: fall back to working in host-mode if extcon is missing.Enric Balletbo i Serra2018-03-161-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Right now the rockchip type-c phy does fail probing when no extcon is detected. Some boards get the cable-state via the extcon interface and have this supported, other boards seem to use the fusb302 chip or another but the driver currently does not seem to utilize the extcon interface to report the cable-state. And, other, just connect the type-c to a standard USB-A port so use no controller at all. A missing extcon shouldn't fail to probe, instead, should just fall back to working in host-mode if it cannot get the extcon. Fixes: c301b327aea898af ("arm64: dts: rockchip: add usb3-phy otg-port support for rk3399") Reported-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: rockchip-typec: support DP phy switchChris Zhong2018-03-161-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are 2 Type-c PHYs in RK3399, but only one DP controller. Hence only one PHY can connect to DP controller at one time, the other should be disconnected. The GRF_SOC_CON26 register has a switch bit to do it, set this bit means enable PHY 1, clear this bit means enable PHY 0. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: rockchip-typec: force to USB2 if DP at 4 lanes modeChris Zhong2018-03-161-3/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The usb3tousb2_en BIT will be clear to 0 in probe(), it make USB controller work at USB3 mode, and if the USB phy is turned on with DP only mode(4 lanes DP), the rockchip_usb3_phy_power_on() will return directly, so usb3_host_disable and usb3_host_port these 2 BIT will keep a same value as coreboot. In coreboot, these 3 BITs are set as USB2 mode, but now one of the bits is changed to USB3, it make USB controller work at a unknown status. These 3 BITs should be changed to USB2, if the Type-C works at 4 lanes mode, and then switch it back to USB3 mode, when USB disconnect. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: rockchip-typec: enable usb3 host during usb3 phy power onWilliam wu2018-03-161-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have forced usb3 to work in usb2 only mode in firmware by setting usb3tousb2_en (bit3 of GRF_USB3PHY0/1_CON0) to 1, and setting host_u3_port_disable (bit0 of GRF_USB3OTG0/1_CON1) to 1 and host_u3_port (bit15~12 of GRF_USB3OTG0/1_CON1) to 0. So we need to re-enable usb3 host. Note that the RK3399 TRM suggests that we should keep the whole usb3 controller in reset for the duration of the Type-C PHY initialization. However, it's hard to assert the reset in the current framework of reset. And according to the TRM, it doesn't require that we should clear the usb3tousb2 bit before pipe ready. So let's enable the usb3 host after pipe ready to avoid the Type-C PHY initialization failure. Signed-off-by: William wu <wulf@rock-chips.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: rockchip-typec: deprecate some DT properties for various register fields.Enric Balletbo i Serra2018-03-161-49/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding properties for various register fields in the DT doesn't scale and this information should be in the driver instead. Before this patch these registers (description below) were specified in the DT, every register node contained 3 sections: offset, enable bit, write mask bit. - rockchip,typec-conn-dir : the register of type-c connector direction, for type-c phy0, it must be <0xe580 0 16>; for type-c phy1, it must be <0xe58c 0 16>; - rockchip,usb3tousb2-en : the register of type-c force usb3 to usb2 enable control. for type-c phy0, it must be <0xe580 3 19>; for type-c phy1, it must be <0xe58c 3 19>; - rockchip,external-psm : the register of type-c phy external psm clock selection. for type-c phy0, it must be <0xe588 14 30>; for type-c phy1, it must be <0xe594 14 30>; - rockchip,pipe-status : the register of type-c phy pipe status. for type-c phy0, it must be <0xe5c0 0 0>; for type-c phy1, it must be <0xe5c0 16 16>; After this patch these register definitions are in the driver. So can be removed from the DT. Note that there are 2 type-c phys for RK3399 with different offsets, the driver checks the phy base address of the running instance and applies the right offsets. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4Tony Lindgren2018-03-163-0/+551
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let's add support for the GPIO controlled USB PHY on the MDM6600 modem. It is used on some Motorola Mapphone series of phones and tablets such as Droid 4. The MDM6600 is hardwired to the first OHCI port in the Droid 4 case, and is controlled by several GPIOs. The USB PHY is integrated into the MDM6600 device it seems. We know this as we get L3 errors from omap-usb-host if trying to use the PHY before MDM6600 is configured. The GPIOs controlling MDM6600 are used to power device on and off, to configure the USB start-up mode (normal mode versus USB flashing), and they also tell the state of the MDM6600 device. The two start-up mode GPIOs are dual-purposed and used for out of band (OOB) wake-up for USB and TS 27.010 serial mux. But we need to configure the USB start-up mode first to get MDM6600 booted in the right mode to be usable in the first place. Note that the Motorola Mapphone Linux kernel tree has a "radio-ctrl" driver for modems. But it really does not control the radio at all, it just controls the modem power and start-up mode for USB. So I came to the conclusion that we're better off having this done in the USB PHY driver. For adding support for USB flashing mode, we can later on add a kernel module option for flash_mode=1 or something similar. Also note that currently there is no PM runtime support for the OHCI on omap variant SoCs. So for low(er) power idle states, currenty both ohci-platform and phy-mapphone-mdm6600 must be unloaded or unbound. For reference here is what I measured for total power consumption on an idle Droid 4 with and without USB related MDM6600 modules: idle lcd off phy-mapphone-mdm6600 ohci-platform 153mW 284mW 344mW So it seems that MDM6600 is currently not yet idling even with it's radio turned off, but that's something that is beyond the control of this USB PHY driver. This patch does get us to the point where modem data and GPS are usable with libqmi and ModemManager for example. Voice calls need more audio driver work. Cc: devicetree@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: add inno-usb2-phy driver for hi3798cv200 SoCPengcheng Li2018-03-163-0/+208
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It adds inno-usb2-phy driver for hi3798cv200 SoC USB 2.0 support. One inno-usb2-phy device can support up to two PHY ports. While there is device level reference clock and power reset to be controlled, each PHY port has its own utmi reset that needs to assert/de-assert as needed. Hi3798cv200 needs to access PHY port0 register via particular peripheral syscon controller register to control PHY, like turning on PHY clock. Signed-off-by: Pengcheng Li <lpc.li@hisilicon.com> Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: rcar-gen3-usb2: Add support for r8a77965Yoshihiro Shimoda2018-03-161-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for r8a77965 (R-Car M3-N). This SoC has dedicated pins. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: stm32: add support for STM32 USB PHY Controller (USBPHYC)Amelie Delaunay2018-03-163-0/+476
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds phy transceiver driver for STM32 USB PHY Controller (USBPHYC) that provides dual port High-Speed phy for OTG (single port) and EHCI/OHCI host controller (two ports). One port of the phy is shared between the two USB controllers through a UTMI+ switch. [fengguang.wu@intel.com: Make stm32_usbphyc_get_pll_params() to be static] Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: add 'depends on HAS_IOMEM' to fix unmet dependencyMasahiro Yamada2018-03-163-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These configs select MFD_SYSCON, but do not depend on HAS_IOMEM. Compile testing on architecture without HAS_IOMEM causes "unmet direct dependencies" in Kconfig phase. Detected by "make ARCH=score allyesconfig". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: amlogic: add USB3 PHY support for Meson GXL and GXMMartin Blumenstingl2018-03-163-0/+295
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds a new driver for the USB3 PHY found on Meson GXL and GXM SoCs (both SoCs are using the same USB PHY register layout). Unfortunately there is no documentation for this PHY in the public S905X datasheet (published for example by Khadas). What we know so far about this PHY: - even though the Meson GXL and GXM SoCs do not expose an USB3 port (the dwc3 controller only has USB2 ports enabled) we need to initialize the USB3 PHY (specifically USB_R1_U3H_FLADJ_30MHZ_REG_MASK). Without this initialization high-speed USB devices (especially USB hard disks and thumb drives, slower devices like mice do not seem to be affected) - on some boards the USB3 PHY starts in "device mode" - we want to bring it into a known state (by switching it to host mode for now). - it is responsible for the OTG detection and for switching the first USB2 PHY between host and peripheral (aka device) mode. an interrupt can be used to detect changes between host and device mode. There are five inputs to this register area: - the clock and reset line for the USB3 PHY itself - the clock and reset line for the peripheral mode and OTG detection logic (on the GXL and GXM SoCs these are the same clock and reset line as for the USB3 PHY itself, but Amlogic sees this as two different components - even though they share the same register space - so they have to be passed individually to allow specifying different inputs on other SoCs if needed) - the interrupt for the OTG detection logic The whole OTG detection logic is not implemented yet. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Yixun Lan <yixun.lan@amlogic.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: berlin-usb: adjust USB_PHY_RX_CTRL init flagsAlexander Monakov2018-03-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make the value written into the USB_PHY_RX_CTRL configuration register match 0xAA79 value written by manufacturer-supplied kernels for Sony NSZ-GS7 (Berlin2 SoC), Google Chromecast and Valve Steam Link (BG2CD). This fixes timeouts communicating to the internal hub on Steam Link. Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Alexander Monakov <amonakov@ispras.ru> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: phy-mtk-tphy: add configurable parameters for slew rate calibrateChunfeng Yun2018-03-161-5/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two parameters, ref_clk and coefficient, for U2 slew rate calibrate which may vary on different SoCs, here allow them to be configurable Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: phy-mtk-tphy: keep default value of mcu_bus_ck_gate_enChunfeng Yun2018-03-161-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The default value of mcu_bus_ck_gate_en is 1, if clear it, will prevent system to enter deep idle mode, so keep its default value and without affecting PCIe function. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: lpc18xx-usb-otg: error handling in lpc18xx_usb_otg_phy_power_on()Alexey Khoroshilov2018-03-161-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If regmap_update_bits() fails in lpc18xx_usb_otg_phy_power_on(), lpc->clk is left enabled. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: allwinner: sun4i-usb: poll vbus changes on A23/A33 when driving VBUSChen-Yu Tsai2018-03-121-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The AXP223 PMIC, like the AXP221, does not generate VBUS change interrupts when N_VBUSEN is used to drive VBUS for the OTG port on the board. This was not noticed until recently, as most A23/A33 boards use a GPIO pin that does not support interrupts for OTG ID detection. This forces the driver to use polling. However the A33-OlinuXino uses a pin that does support interrupts, so the driver uses them. However the VBUS interrupt never fires, and the driver never gets to update the VBUS status. This results in musb timing out waiting for VBUS to rise. This was worked around for the AXP221 by resorting to polling changes in commit 91d96f06a760 ("phy-sun4i-usb: Add workaround for missing Vbus det interrupts on A31"). This patch adds the A23 and A33 to the list of SoCs that need the workaround. Fixes: fc1f45ed3043 ("phy-sun4i-usb: Add support for the usb-phys on the sun8i-a33 SoC") Fixes: 123dfdbcfaf5 ("phy-sun4i-usb: Add support for the usb-phys on the sun8i-a23 SoC") Cc: <stable@vger.kernel.org> # 4.3.x: 68dbc2ce77bb phy-sun4i-usb: Use of_match_node to get model specific config data Cc: <stable@vger.kernel.org> # 4.3.x: 5cf700ac9d50 phy: phy-sun4i-usb: Fix optional gpios failing probe Cc: <stable@vger.kernel.org> # 4.3.x: 04e59a0211ff phy-sun4i-usb: Fix irq free conditions to match request conditions Cc: <stable@vger.kernel.org> # 4.3.x: 91d96f06a760 phy-sun4i-usb: Add workaround for missing Vbus det interrupts on A31 Cc: <stable@vger.kernel.org> # 4.3.x Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: amlogic: phy-meson-gxl-usb2: rename some of the U2P_R2 registersMartin Blumenstingl2018-03-081-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The U2P_R2 register provides "test mode" functionality for bits 17:0. These are only used during SoC development and should be left untouched on production SoC versions. Rename these register definitions to indicate that these are for "test mode" only. While here, also merge the definitions for U2P_R2_DATA_IN_MASK and U2P_R2_DATA_IN_EN_MASK (bits 0:7) because Amlogic's internal documentation suggests that these bits belong together. The old definition was not taken from the documentation but rather from a struct definition in the Amlogic GPL kernel sources. No functional changes. Suggested-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: amlogic: phy-meson-gxl-usb2: default to host modeMartin Blumenstingl2018-03-082-14/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The USB2 PHY can switch between PHY_MODE_USB_HOST and PHY_MODE_USB_DEVICE. However, it cannot do it on it's own since it requires re-routing of the corresponding USB pins from dwc3 (which is used for host-mode) to dwc2 (which is used for device-mode). Thus we don't need to auto-detect the mode based on the USB controller, which simplifies the driver code. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: amlogic: phy-meson-gxl-usb2: support the clock and reset lineMartin Blumenstingl2018-03-081-0/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Meson GXL USB2 PHYs require an additional clock (USB) which has to be enabled. If that clock is disabled then all PHY registers read 0x0. Luckily for us that clock is always enabled (either by harddware defaults, the bootrom, or any of the bootloaders before u-boot/BL3-3). The OTG capable USB2 PHY additionally has a reset line (USB_OTG, which is shared with other components, such as the USB3 PHY for example). Extend the driver so it handles this clock and the shared reset line. We only trigger the reset during the .init phase since it's a shared reset line, so triggering it during the driver's .reset implementation would effectively also only trigger it once anyways. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: amlogic: phy-meson-gxl-usb2: don't log an error on -EPROBE_DEFERMartin Blumenstingl2018-03-081-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | devm_phy_create can return -EPROBE_DEFER if the phy-supply is not ready yet. Silence this warning as the driver framework will re-attempt registering the PHY - this second try works without any errors. So only log actual errors to keep the kernel log free of misleading error messages. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: rockchip-emmc: use regmap_read_poll_timeout to poll dllrdyShawn Lin2018-03-081-22/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Just use the API instead of open-coding it, no functional change intended. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: rockchip-emmc: retry calpad busy trimmingShawn Lin2018-03-081-10/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It turns out that 5us isn't enough for all cases, so let's retry some more times to wait for caldone. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Tested-by: Ziyuan Xu <xzy.xu@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: Remove SOC_EXYNOS4212 dep. from PHY_EXYNOS4X12_USBUlf Magnusson2018-03-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Exynos4212 support was removed by commit bca9085e0ae9 ("ARM: dts: exynos: remove Exynos4212 support (dead code)"). Remove the SOC_EXYNOS4212 dependency from PHY_EXYNOS4X12_USB. Discovered with the https://github.com/ulfalizer/Kconfiglib/blob/master/examples/list_undefined.py script. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: add SPDX identifier to QMP and QUSB2 PHY driversManu Gautam2018-03-082-19/+2
| | | | | | | | | | | | | | | | | | | | | | | | The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: qcom-qmp: Add support for runtime PMManu Gautam2018-03-082-1/+179
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Disable clocks and enable PHY autonomous mode to detect wakeup events when PHY is suspended. Core driver should notify speed to PHY driver to enable LFPS and/or RX_DET interrupts. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: qcom-qusb2: Add support for runtime PMManu Gautam2018-03-081-0/+176
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Disable clocks and enable DP/DM wakeup interrupts when suspending PHY. Core driver should notify speed to PHY driver to enable appropriate DP/DM wakeup interrupts polarity in suspend state. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: Add USB speed related PHY modesManu Gautam2018-03-081-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add following USB speed related PHY modes: LS (Low Speed), FS (Full Speed), HS (High Speed), SS (Super Speed) Speed related information is required by some QCOM PHY drivers to program PHY monitor resume/remote-wakeup events in suspended state. Speed is needed in order to set correct polarity of wakeup events for detection. E.g. QUSB2 PHY monitors DP/DM line state depending on whether speed is LS or FS/HS to detect resume. Similarly QMP USB3 PHY in SS mode should monitor RX terminations attach/detach and LFPS events depending on SSPHY is active or not. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: qcom-qmp: Add support for QMP V3 USB3 PHYManu Gautam2018-03-081-3/+220
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | QMP V3 USB3 PHY is a DisplayPort (DP) and USB combo PHY with dual RX/TX lanes to support type-c. There is a separate block DP_COM for configuration related to type-c or DP. Add support for dp_com region and secondary rx/tx lanes initialization. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: qcom-qmp: Add register offsets for QMP V3 PHYManu Gautam2018-03-081-0/+149
| | | | | | | | | | | | | | | | | | | | | | | | Registers offsets for QMP V3 PHY are changed from previous versions (1/2), update same in header file. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: qcom-qmp: Move register offsets to header fileManu Gautam2018-03-082-118/+129
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | New revision (v3) of QMP PHY uses different offsets for almost all of the registers. Hence, move these definitions to header file so that updated offsets can be added for QMP v3. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: qcom-qusb2: Add support for QUSB2 V2 versionManu Gautam2018-03-081-0/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use register layout to add additional registers present on QUSB2 PHY V2 version for PHY initialization. Other than new registers on V2, following two register's offset and bit definitions are different: POWERDOWN control and PLL_STATUS. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: qcom-qusb2: Add support for different register layoutsManu Gautam2018-03-081-40/+109
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | New version of QUSB2 PHY has some registers offset changed. Add support to have register layout for a target and update the same in phy_configuration. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: qcom-qmp: Move SERDES/PCS START after PHY resetManu Gautam2018-03-081-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Driver is currently performing PHY reset after starting SERDES/PCS. As per hardware datasheet reset must be done before starting PHY. Hence, update the sequence. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: qcom-qmp: Fix PHY block reset sequenceManu Gautam2018-03-081-9/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PHY block or asynchronous reset requires signal to be asserted before de-asserting. Driver is only de-asserting signal which is already low, hence reset operation is a no-op. Fix this by asserting signal first. Also, resetting requires PHY clocks to be turned ON only after reset is finished. Fix that as well. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: qcom-qusb2: Power-on PHY before initializationManu Gautam2018-03-081-32/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PHY must be powered on before turning ON clocks and attempting to initialize it. Driver is exposing separate init and power_on routines for this. Apparently USB dwc3 core driver performs power-on after init. Also, poweron and init for QUSB2 PHY need to be executed together always, hence remove poweron callback from phy_ops and explicitly perform this from init, similar changes needed for poweroff. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: qcom-qmp: Power-on PHY before initializationManu Gautam2018-03-081-37/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PHY regulators which are enabled from power_on() must be ON before turning-on clocks and initializing it as part of init(). As most of the core drivers perform power_on() after init(), move PHY regulators enable to com_init() and use power_on() to only enable pipe_clk. This pipe_clk is output from PHY and some core drivers e.g. PCIe follow specific sequence after phy_init() that mandates pipe_clk to be enabled from power_on() only. On similar lines move clk_enable from init() to com_init() which executes once for multi lane PHYs. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: qcom-qmp: Adapt to clk_bulk_* APIsVivek Gautam2018-03-081-34/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | Move from using array of clocks to clk_bulk_* APIs that are available now. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: qcom-qmp: Fix phy pipe clock gatingVivek Gautam2018-03-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pipe clock comes out of the phy and is available as long as the phy is turned on. Clock controller fails to gate this clock after the phy is turned off and generates a warning. / # [ 33.048561] gcc_usb3_phy_pipe_clk status stuck at 'on' [ 33.048585] ------------[ cut here ]------------ [ 33.052621] WARNING: CPU: 1 PID: 18 at ../drivers/clk/qcom/clk-branch.c:97 clk_branch_wait+0xf0/0x108 [ 33.057384] Modules linked in: [ 33.066497] CPU: 1 PID: 18 Comm: kworker/1:0 Tainted: G W 4.12.0-rc7-00024-gfe926e34c36d-dirty #96 [ 33.069451] Hardware name: Qualcomm Technologies, Inc. DB820c (DT) ... [ 33.278565] [<ffff00000849b27c>] clk_branch_wait+0xf0/0x108 [ 33.286375] [<ffff00000849b2f4>] clk_branch2_disable+0x28/0x34 [ 33.291761] [<ffff0000084868dc>] clk_core_disable+0x5c/0x88 [ 33.297660] [<ffff000008487d68>] clk_core_disable_lock+0x20/0x34 [ 33.303129] [<ffff000008487d98>] clk_disable+0x1c/0x24 [ 33.309384] [<ffff0000083ccd78>] qcom_qmp_phy_poweroff+0x20/0x48 [ 33.314328] [<ffff0000083c53f4>] phy_power_off+0x80/0xdc [ 33.320492] [<ffff00000875c950>] dwc3_core_exit+0x94/0xa0 [ 33.325784] [<ffff00000875c9ac>] dwc3_suspend_common+0x50/0x60 [ 33.331080] [<ffff00000875ca04>] dwc3_runtime_suspend+0x48/0x6c [ 33.336810] [<ffff0000085b82f4>] pm_generic_runtime_suspend+0x28/0x38 [ 33.342627] [<ffff0000085bace0>] __rpm_callback+0x150/0x254 [ 33.349222] [<ffff0000085bae08>] rpm_callback+0x24/0x78 [ 33.354604] [<ffff0000085b9fd8>] rpm_suspend+0xe0/0x4e4 [ 33.359813] [<ffff0000085bb784>] pm_runtime_work+0xdc/0xf0 [ 33.365028] [<ffff0000080d7b30>] process_one_work+0x12c/0x28c [ 33.370576] [<ffff0000080d7ce8>] worker_thread+0x58/0x3b8 [ 33.376393] [<ffff0000080dd4a8>] kthread+0x100/0x12c [ 33.381776] [<ffff0000080836c0>] ret_from_fork+0x10/0x50 Fix this by disabling it as the first thing in phy_exit(). Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets") Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: add combo phy driver for HiSilicon STB SoCsJianguo Sun2018-02-213-0/+299
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add combo phy driver for HiSilicon STB SoCs. This phy can be used as pcie-phy, sata-phy or usb-phy. Changes for v5: - Add bindings doc for Hi3798CV200 peripheral controller, and refer to the bindings of this parent node in combphy bindings doc. Changes for v4: - Instead of relying on device id, add a new property hisilicon,fixed-mode for combphy device that doesn't support mode select but a fixed phy mode. - Move combphy mode select register bits definition to device tree, as it may vary from one device to another. Changes for v3: - Make combphy device be child of peripheral controller and use 'reg' property for mapping combphy configuration registers. - Kill "hisilicon,peripheral-syscon" property, since parent node is just the syscon controller now. - Check combphy id to handle the quirk that combphy0 can not configure mode but always works in USB3 mode. - Unify phy .init and .exit hooks for different combphy instances and work modes, as the only quirk we need to handle is that combphy0 can only work in USB3 mode. - Better naming for clock and reset, 'ref' to 'ref_clk', 'por' to 'por_rst'. Changes for v2: - Move DT bindings into a separate patch. - Drop the spurious newline from drivers/phy/Makefile. - Use the phy type defines in dt-bindings/phy/phy.h. - Use PTR_ERR_OR_ZERO() for checking return from devm_of_phy_provider_register(). - Add USB3 phy support. Signed-off-by: Jianguo Sun <sunjianguo1@huawei.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: sun4i-usb: add support for R40 USB PHYIcenowy Zheng2018-02-211-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allwinner R40 features a USB PHY like the one in A64, but with 3 PHYs. Add support for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Tested-by: Hermann Lauer <Hermann.Lauer@iwr.uni-heidelberg.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: tegra: remove redundant self assignment of 'map'Colin Ian King2018-02-211-1/+1
| |/ | | | | | | | | | | | | | | The assignment of map to itself is redundant and can be removed. Detected with Coccinelle. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | phy: qcom-ufs: add MODULE_LICENSE tagArnd Bergmann2018-03-121-0/+5
|/ | | | | | | | | | | | | | | | | While the specific UFS PHY drivers (14nm and 20nm) have a module license, the common base module does not, leading to a Kbuild failure: WARNING: modpost: missing MODULE_LICENSE() in drivers/phy/qualcomm/phy-qcom-ufs.o FATAL: modpost: GPL-incompatible module phy-qcom-ufs.ko uses GPL-only symbol 'clk_enable' This adds a module description and license tag to fix the build. I added both Yaniv and Vivek as authors here, as Yaniv sent the initial submission, while Vivek did most of the work since. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* Merge tag 'usb-4.16-rc1' of ↵Linus Torvalds2018-02-014-34/+210
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big USB and PHY driver update for 4.16-rc1. Along with the normally expected XHCI, MUSB, and Gadget driver patches, there are some PHY driver fixes, license cleanups, sysfs attribute cleanups, usbip changes, and a raft of other smaller fixes and additions. Full details are in the shortlog. All of these have been in the linux-next tree for a long time with no reported issues" * tag 'usb-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (137 commits) USB: serial: pl2303: new device id for Chilitag USB: misc: fix up some remaining DEVICE_ATTR() usages USB: musb: fix up one odd DEVICE_ATTR() usage USB: atm: fix up some remaining DEVICE_ATTR() usage USB: move many drivers to use DEVICE_ATTR_WO USB: move many drivers to use DEVICE_ATTR_RO USB: move many drivers to use DEVICE_ATTR_RW USB: misc: chaoskey: Use true and false for boolean values USB: storage: remove old wording about how to submit a change USB: storage: remove invalid URL from drivers usb: ehci-omap: don't complain on -EPROBE_DEFER when no PHY found usbip: list: don't list devices attached to vhci_hcd usbip: prevent bind loops on devices attached to vhci_hcd USB: serial: remove redundant initializations of 'mos_parport' usb/gadget: Fix "high bandwidth" check in usb_gadget_ep_match_desc() usb: gadget: compress return logic into one line usbip: vhci_hcd: update 'status' file header and format USB: serial: simple: add Motorola Tetra driver CDC-ACM: apply quirk for card reader usb: option: Add support for FS040U modem ...
| * Merge tag 'phy-for-4.16' of ↵Greg Kroah-Hartman2018-01-084-34/+210
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next Kishon writes: phy: for 4.16 *) Fix in exynos5-usbdrd to enumerate SuperSpeed devices on Odroid XU3 *) Fix in Broadcom USB PHY to get Dell Low Speed keyboards working *) Fix in Broadcom USB PHY to power down the PHY when XHCI disabled to save power *) Fix in Broadcom USB PHY to prevent abort in DRD mode *) Fix in Broadcom USB PHY to use the correct dt properties *) Fix in Mediatek PHY to detect device connection *) Make getting resource optional for Mediatek V1 TPHY *) Cleanup in Mediatek PHY Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| | * phy: phy-mtk-tphy: use of_device_get_match_data()Chunfeng Yun2017-12-291-6/+5
| | | | | | | | | | | | | | | | | | | | | reduce the boilerplate code to get the specific data Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
OpenPOWER on IntegriCloud