summaryrefslogtreecommitdiffstats
path: root/drivers/phy
Commit message (Collapse)AuthorAgeFilesLines
* phy: qcom-usb-hs: Add depends on EXTCONStephen Boyd2017-03-091-0/+1
| | | | | | | | | | | | | | | | | | | | We get the following compile errors if EXTCON is enabled as a module but this driver is builtin: drivers/built-in.o: In function `qcom_usb_hs_phy_power_off': phy-qcom-usb-hs.c:(.text+0x1089): undefined reference to `extcon_unregister_notifier' drivers/built-in.o: In function `qcom_usb_hs_phy_probe': phy-qcom-usb-hs.c:(.text+0x11b5): undefined reference to `extcon_get_edev_by_phandle' drivers/built-in.o: In function `qcom_usb_hs_phy_power_on': phy-qcom-usb-hs.c:(.text+0x128e): undefined reference to `extcon_get_state' phy-qcom-usb-hs.c:(.text+0x12a9): undefined reference to `extcon_register_notifier' so let's mark this as needing to follow the modular status of the extcon framework. Fixes: 9994a33865f4 e2427b09ba929c2b9 (phy: Add support for Qualcomm's USB HS phy") Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: phy-exynos-pcie: fix the wrong error returnJaehoon Chung2017-03-091-2/+2
| | | | | | | | | | | When it doesn't get the blk_base's resource, it was returned the error about phy_base, not blk_base. This patch is for fixing the wrong error return about blk_base. Fixes: cf0adb8e281b ("phy: phy-exynos-pcie: Add support for Exynos PCIe PHY") Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* Revert "phy: Add USB3 PHY support for Broadcom NSP SoC"Rafał Miłecki2017-03-093-186/+0
| | | | | | | | | | | | | | | | This reverts commit d7bc1a7d41bf ("phy: Add USB3 PHY support for Broadcom NSP SoC") as we already have driver for this PHY (shared by NS and NSP). It was added in commit e5666281d9ea ("phy: bcm-ns-usb3: new driver for USB 3.0 PHY on Northstar"). Instead of adding separated driver & duplicating code we should work on improving existing (old) one. Thanks to work done by Broadcom we know there is MDIO bus we weren't aware of & we know register names which makes initialization more clear. This is very valuable info and we should work on using it in existing driver afterwards. Acked-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* Merge tag 'pci-v4.11-changes' of ↵Linus Torvalds2017-02-233-0/+294
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - add ASPM L1 substate support - enable PCIe Extended Tags when supported - configure PCIe MPS settings on iProc, Versatile, X-Gene, and Xilinx - increase VPD access timeout - add ACS quirks for Intel Union Point, Qualcomm QDF2400 and QDF2432 - use new pci_irq_alloc_vectors() in more drivers - fix MSI affinity memory leak - remove unused MSI interfaces and update documentation - remove unused AER .link_reset() callback - avoid pci_lock / p->pi_lock deadlock seen with perf - serialize sysfs enable/disable num_vfs operations - move DesignWare IP from drivers/pci/host/ to drivers/pci/dwc/ and refactor so we can support both hosts and endpoints - add DT ECAM-like support for HiSilicon Hip06/Hip07 controllers - add Rockchip system power management support - add Thunder-X cn81xx and cn83xx support - add Exynos 5440 PCIe PHY support * tag 'pci-v4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (93 commits) PCI: dwc: Remove dependency of designware on CONFIG_PCI PCI: dwc: Add CONFIG_PCIE_DW_HOST to enable PCI dwc host PCI: dwc: Split pcie-designware.c into host and core files PCI: dwc: designware: Fix style errors in pcie-designware.c PCI: dwc: designware: Parse "num-lanes" property in dw_pcie_setup_rc() PCI: dwc: all: Split struct pcie_port into host-only and core structures PCI: dwc: designware: Get device pointer at the start of dw_pcie_host_init() PCI: dwc: all: Rename cfg_read/cfg_write to read/write PCI: dwc: all: Use platform_set_drvdata() to save private data PCI: dwc: designware: Move register defines to designware header file PCI: dwc: Use PTR_ERR_OR_ZERO to simplify code PCI: dra7xx: Group PHY API invocations PCI: dra7xx: Enable MSI and legacy interrupts simultaneously PCI: dra7xx: Add support to force RC to work in GEN1 mode PCI: dra7xx: Simplify probe code with devm_gpiod_get_optional() PCI: Move DesignWare IP support to new drivers/pci/dwc/ directory PCI: exynos: Support the PHY generic framework Documentation: binding: Modify the exynos5440 PCIe binding phy: phy-exynos-pcie: Add support for Exynos PCIe PHY Documentation: samsung-phy: Add exynos-pcie-phy binding ...
| * phy: phy-exynos-pcie: Add support for Exynos PCIe PHYJaehoon Chung2017-02-213-0/+294
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Generic PHY framework about Exynos SoCs. Current Exynos PCIe driver doesn't use the PHY framework, which makes it difficult to upstream the other Exynos variants because of different PHY registers. Move the codes relevant to PHY from Exnyos PCIe driver to PHY Exynos PCIe driver. [bhelgaas: depend on "OF && (ARCH_EXYNOS || COMPILE_TEST)", update copyright year, both per Vivek] Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Jingoo Han <jingoohan1@gmail.com> Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | phy: qcom-ufs: Fix misplaced jump labelVivek Gautam2017-01-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We want to skip only tx/rx_iface clocks and not ref_clk_src as well. Fix the jump label accordingly. Fixes: 300f96771d78 ("phy: qcom-ufs: Skip obtaining rx/tx_iface_clk for msm8996 based phy") Cc: Subhash Jadavani <subhashj@codeaurora.org> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: stable@vger.kernel.org Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | phy: fix rockchip-inno-usb2 build errorsRandy Dunlap2017-01-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix build errors in phy-rockchip-inno-usb2.c. The driver uses extcon interfaces so it should depend on EXTCON. Fixes these build errors: drivers/built-in.o: In function `rockchip_usb2phy_otg_sm_work': phy-rockchip-inno-usb2.c:(.text+0x2bcb): undefined reference to `extcon_get_state' phy-rockchip-inno-usb2.c:(.text+0x2cd4): undefined reference to `extcon_set_state_sync' phy-rockchip-inno-usb2.c:(.text+0x2cec): undefined reference to `extcon_set_state_sync' phy-rockchip-inno-usb2.c:(.text+0x2d2d): undefined reference to `extcon_get_state' drivers/built-in.o: In function `rockchip_usb2phy_probe': phy-rockchip-inno-usb2.c:(.text+0x31d7): undefined reference to `extcon_get_edev_by_phandle' phy-rockchip-inno-usb2.c:(.text+0x321a): undefined reference to `devm_extcon_dev_allocate' phy-rockchip-inno-usb2.c:(.text+0x3230): undefined reference to `devm_extcon_dev_register' phy-rockchip-inno-usb2.c:(.text+0x375a): undefined reference to `extcon_register_notifier' Found in linux-next but is also needed in mainline. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | phy: Add USB3 PHY support for Broadcom NSP SoCYendapally Reddy Dhananjaya Reddy2017-01-273-0/+186
| | | | | | | | | | | | | | | | This patch adds support for Broadcom NSP USB3 PHY Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | phy: qcom-ufs: Suppress extraneous loggingBjorn Andersson2017-01-272-22/+5
| | | | | | | | | | | | | | | | | | | | | | | | The error paths of the common qcom-ufs functions for registering the phy, acquiring clocks and acquiring regulators all print specific error messages before returning an error, so there is no value in printing yet another - more generic - message when this occur. Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | phy: qcom-ufs: Remove -always-on propertyBjorn Andersson2017-01-272-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The fact that a regulator is always-on is a property of the regulator, not a specific consumer. Implementing this in the driver leads to a system behaviour that is dependent on if the Qualcomm UFS PHY was ever (partially) probed. If the specific regulator should be always on in a particular device, mark it so by specifying "regulator-always-on" in the regulator node. Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | phy: qcom-ufs: Correct usage of regulator_get()Bjorn Andersson2017-01-271-14/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When regulator_get() tries to resolve a regulator supply but fail to find a matching property in DeviceTree it returns a dummy regulator, if a matching supply is specified but unavailable the regulator core will return an error. Based on this we should not ignore errors upon failing to acquire the optional "vddp-ref-clk" supply. Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | phy: qcom-ufs: Don't kfree devres resourceBjorn Andersson2017-01-271-8/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Upon failing to acquire regulator supplies the qcom-ufs driver calls kfree() on the devm allocated memory used to store the name of the regulator, leading to devres corruption. Rather than switching to using the appropriate free function the patch acknowledge the fact that "name" is always a constant string and we don't actually need to create a local copy of it, but rather just reference the constant string. Fixes: add78fc05702 ("phy: qcom-ufs: Use devm sibling of kstrdup for regulator names") Cc: stable@vger.kernel.org Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | phy: Add support for Qualcomm's USB HS phyStephen Boyd2017-01-273-0/+305
| | | | | | | | | | | | | | | | | | | | | | The high-speed phy on qcom SoCs is controlled via the ULPI viewport. Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: <devicetree@vger.kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | phy: Add support for Qualcomm's USB HSIC phyStephen Boyd2017-01-273-0/+168
| | | | | | | | | | | | | | | | | | | | | | The HSIC USB controller on qcom SoCs has an integrated all digital phy controlled via the ULPI viewport. Cc: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Rob Herring <robh@kernel.org> Cc: <devicetree@vger.kernel.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | drivers: phy: constify phy_ops structuresBhumika Goyal2017-01-164-4/+4
| | | | | | | | | | | | | | | | | | | | | | Declare phy_ops structures as const as they are only passed as an argument to the function devm_phy_create. This argument is of type const struct phy_ops *, so phy_ops structures having this property can be declared as const. Done using Coccinelle: Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | phy: sun4i-usb: Replace the deprecated extcon APIChanwoo Choi2017-01-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | This patch replaces the deprecated extcon API as following: - extcon_set_cable_state_() -> extcon_set_state_sync() Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | phy: rcar-gen3-usb2: Replace the deprecated extcon APIChanwoo Choi2017-01-161-4/+4
| | | | | | | | | | | | | | | | | | This patch replaces the deprecated extcon API as following: - extcon_set_cable_state_() -> extcon_set_state_sync() Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | phy: sun4i-usb: add support for V3s USB PHYIcenowy Zheng2017-01-161-1/+13
| | | | | | | | | | | | | | | | | | | | | | Allwinner V3s come with a USB PHY controller slightly different to other SoCs, with only one PHY. Add support for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | phy: rockchip-inno-usb2: Set EXTCON_USB when EXTCON_CHG_USB_SDP was setBaolin Wang2017-01-161-1/+6
|/ | | | | | | | | According to the documentation, we should set the EXTCON_USB when one SDP charger connector was reported. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2016-12-144-243/+174
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull SCSI updates from James Bottomley: "This update includes the usual round of major driver updates (ncr5380, lpfc, hisi_sas, megaraid_sas, ufs, ibmvscsis, mpt3sas). There's also an assortment of minor fixes, mostly in error legs or other not very user visible stuff. The major change is the pci_alloc_irq_vectors replacement for the old pci_msix_.. calls; this effectively makes IRQ mapping generic for the drivers and allows blk_mq to use the information" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (256 commits) scsi: qla4xxx: switch to pci_alloc_irq_vectors scsi: hisi_sas: support deferred probe for v2 hw scsi: megaraid_sas: switch to pci_alloc_irq_vectors scsi: scsi_devinfo: remove synchronous ALUA for NETAPP devices scsi: be2iscsi: set errno on error path scsi: be2iscsi: set errno on error path scsi: hpsa: fallback to use legacy REPORT PHYS command scsi: scsi_dh_alua: Fix RCU annotations scsi: hpsa: use %phN for short hex dumps scsi: hisi_sas: fix free'ing in probe and remove scsi: isci: switch to pci_alloc_irq_vectors scsi: ipr: Fix runaway IRQs when falling back from MSI to LSI scsi: dpt_i2o: double free on error path scsi: cxlflash: Migrate scsi command pointer to AFU command scsi: cxlflash: Migrate IOARRIN specific routines to function pointers scsi: cxlflash: Cleanup queuecommand() scsi: cxlflash: Cleanup send_tmf() scsi: cxlflash: Remove AFU command lock scsi: cxlflash: Wait for active AFU commands to timeout upon tear down scsi: cxlflash: Remove private command pool ...
| * phy: qcom-ufs: Remove common layer phy exit callbackVivek Gautam2016-11-084-14/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | The common layer phy exit callback ufs_qcom_phy_exit() calls phy_power_off() that has no meaning when phy_power_off() callback is already registered with the phy provider and the consumer makes use of the same. Instead, add a no-op specific phy_exit() callback for now to add the exit sequence at a later point. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: ufs-qcom: phy/hcd: Refactoring phy clock handlingVivek Gautam2016-11-081-18/+18
| | | | | | | | | | | | | | | | | | | | Add phy clock enable code to phy_power_on/off callbacks, and remove explicit calls to enable these phy clocks from the ufs-qcom hcd driver. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * phy: qcom-ufs-qmp-xx: Move clock and regulator init out of phy initVivek Gautam2016-11-082-52/+46
| | | | | | | | | | | | | | | | | | | | | | The phy init is meant to do phy initialization rather than just getting the clock and regulator. Move these clock and regulator get to probe(), to make room for actual phy initialization sequence. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * phy: qcom-ufs: Remove unnecessary function declarationsVivek Gautam2016-11-081-69/+62
| | | | | | | | | | | | | | | | | | Move the functions' definitions to remove unnecessary declarations. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * phy: qcom-ufs-qmp-xx: Discard remove callback for drivers.Vivek Gautam2016-11-083-41/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | remove() callback does a phy_power_off() only over the phy, and nothing else now. The phy_power_off() over the generic phy is called from the phy consumer, and phy provider driver should not explicitly need to call any phy ops. So discard the remove callback for qcom-ufs phy platform drivers. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * phy: qcom-ufs: Skip obtaining rx/tx_iface_clk for msm8996 based phyVivek Gautam2016-11-081-0/+5
| | | | | | | | | | | | | | | | | | | | The tx_iface_clk and rx_iface_clk no longer exist with UFS Phy present on msm8996. So skip obtaining these clocks using compatible match. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * phy: qcom-ufs-14nm: Add new compatible for msm8996 based phyVivek Gautam2016-11-081-0/+1
| | | | | | | | | | | | | | | | | | | | Add a new compatible string for 14nm ufs phy present on msm8996 chipset. This phy is bit different from the legacy 14nm ufs phy in terms of the clocks that are needed to be handled in the driver. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * phy: qcom-ufs: Cleanup clock and regulator initializationVivek Gautam2016-11-084-57/+37
| | | | | | | | | | | | | | | | | | | | Different menthods pass around generic phy pointer to extract device pointer. Instead, pass the device pointer directly between function calls. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * phy: qcom-ufs: Use devm sibling of kstrdup for regulator namesVivek Gautam2016-11-081-4/+1
| | | | | | | | | | | | | | | | | | This helps us in avoiding any requirement for kfree() operation to be called exclusively over the allocated string pointer. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * phy: qcom-ufs: Remove unnecessary BUG_ONVivek Gautam2016-11-081-2/+0
| | | | | | | | | | | | | | | | | | | | BUG_ON() are not preferred in the driver, plus the variable on which BUG_ON is asserted is already checked in the code before passing. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | Merge tag 'phy-for-4.10' of ↵Greg Kroah-Hartman2016-11-2821-921/+1024
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next Kishon writes: phy: for 4.10 Merge contains: *) Add new usb2 phy driver for Meson8b and GXBB *) Remove phy drivers added for miphy365 and STiH415/6 (as support for these SoCs are removed from the kernel) *) Add a sysfs entry to facilitate usb role swap in rcar SoC *) Add support for otg port in rk3399 *) misc fixes in various phy drivers and cleanups Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: rockchip-inno-usb2: select USB_COMMONArnd Bergmann2016-11-181-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When USB is disabled, we get a link error for this driver because of the added OTG support drivers/phy/phy-rockchip-inno-usb2.o: In function `rockchip_usb2phy_otg_sm_work': phy-rockchip-inno-usb2.c:(.text.rockchip_usb2phy_otg_sm_work+0x1f4): undefined reference to `usb_otg_state_string' drivers/phy/phy-rockchip-inno-usb2.o: In function `rockchip_usb2phy_probe': phy-rockchip-inno-usb2.c:(.text.rockchip_usb2phy_probe+0x2c8): undefined reference to `of_usb_get_dr_mode_by_phy' Other phy drivers select USB_COMMON for this, so let's do the same here. Fixes: 0c42fe48fd23 ("phy: rockchip-inno-usb2: support otg-port for rk3399") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: rockchip-inno-usb2: fix uninitialized tmout variableArnd Bergmann2016-11-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The newly added OTG support has an obvious uninitialized variable access that gcc warns about: drivers/phy/phy-rockchip-inno-usb2.c: In function 'rockchip_chg_detect_work': drivers/phy/phy-rockchip-inno-usb2.c:717:7: error: 'tmout' may be used uninitialized in this function [-Werror=maybe-uninitialized] This replaces the use of the uninitialized variable with what the value was in the previous USB_CHG_STATE_WAIT_FOR_DCD state. Fixes: 0c42fe48fd23 ("phy: rockchip-inno-usb2: support otg-port for rk3399") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: phy-twl4030-usb: emit VBUS status events to userspaceMatt Ranostay2016-11-181-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Emit KOBJ_ONLINE/KOBJ_OFFLINE action uevent on VBUS status changes. Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Matt Ranostay <matt@ranostay.consulting> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy_sun4i_usb: set_mode: Allow using set_mode to force end the current sessionHans de Goede2016-11-181-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sunxi musb has a bug where sometimes it will generate a babble error on device disconnect instead of a disconnect irq. When this happens the musb-controller switches from host mode to device mode (it clears MUSB_DEVCTL_SESSION and sets MUSB_DEVCTL_BDEVICE) and gets stuck in this state. Clearing this requires reporting Vbus low for 200 or more ms, but on some devices Vbus is simply always high (host-only mode, no Vbus control). This commit modifies sun4i_usb_phy_set_mode so that it will force end the current session when called with the current mode, before this commit calling set_mode with the current mode was a nop since id_det would stay the same resulting in the detect_work not doing anything. This allows the sunxi-musb glue to use sun4i_usb_phy_set_mode to force end the current session without changing the mode, to fixup the stuck state after a babble error. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: fix returnvar.cocci warningsVivek Gautam2016-11-182-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove unneeded variables when "0" can be returned. Generated by: scripts/coccinelle/misc/returnvar.cocci Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: Fix ptr_ret.cocci warningsVivek Gautam2016-11-182-16/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR. Generated by: scripts/coccinelle/api/ptr_ret.cocci Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: fix semicolon.cocci warningsVivek Gautam2016-11-186-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove unneeded semicolon. Generated by: coccinellery/semicolon/semicolon.cocci Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: exynos-mipi-video: simplify check for coupled phy statusMarek Szyprowski2016-11-181-14/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no need to access regmap of coupled phy to check its state - such information is already in the phy device itself, so use it directly. This let us to avoid possible access to registers of the device in the disabled power domain if the coupled phy is already disabled. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: rcar-gen3-usb2: add sysfs for usb role swapYoshihiro Shimoda2016-11-181-1/+117
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds sysfs "role" for usb role swap. This parameter can be read and write. If you use this file as the following, you can swap the usb role. For example: 1) Connect a usb cable using 2 Salvator-x boards 2) On A-Device (ID pin is low), you input the following command: # echo peripheral > /sys/devices/platform/soc/ee080200.usb-phy/role 3) On B-Device (ID pin is high), you input the following command: # echo host > /sys/devices/platform/soc/ee080200.usb-phy/role Then, the A-device acts as a peripheral and the B-device acts as a host. Please note that A-Device must input the following command if you want the board to act as a host again. (even if you disconnect the usb cable, since id state may be the same, the A-Device keeps to act as peripheral.) # echo host > /sys/devices/platform/soc/ee080200.usb-phy/role Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: da8xx-usb: Configure CFGCHIP2 to support OTG workaroundAlexandre Bailon2016-11-181-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we configure the da8xx OTG phy in OTG mode, neither device or host mode will work. That is because the PHY is not able to detect and notify the driver that value of ID pin changed. To work despite this hardware limitation, the da8xx glue implement a workaround. But to work, the workaround require the VBUS sense and the session end comparator to enabled. Enable them if the phy is configured in OTG mode. Signed-off-by: Alexandre Bailon <abailon@baylibre.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: stih41x-usb: Remove usb phy driver and dt bindingPeter Griffin2016-11-183-197/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | documentation. This phy is only used on STiH415/6 based silicon, and support for these SoC's is being removed from the kernel. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: phy-miphy365x: Remove miphy365 driver and dt bindingPeter Griffin2016-11-183-636/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | documentation. This phy is only used on STiH415/6 based silicon, and support for these SoC's is being removed from the kernel. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: rockchip-inno-usb2: correct 480MHz output clock stable timeWilliam Wu2016-11-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We found that the system crashed due to 480MHz output clock of USB2 PHY was unstable after clock had been enabled by gpu module. Theoretically, 1 millisecond is a critical value for 480MHz output clock stable time, so we try to change the delay time to 1.2 millisecond to avoid this issue. And the commit ed907fb1d7c3 ("phy: rockchip-inno-usb2: correct clk_ops callback") used prepare callbacks instead of enable callbacks to support gate a clk if the operation may sleep. So we can switch from delay to sleep functions. Also fix a spelling error from "waitting" to "waiting". Signed-off-by: William Wu <wulf@rock-chips.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: rockchip-inno-usb2: correct clk_ops callbackWilliam Wu2016-11-181-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since we needs to delay ~1ms to wait for 480MHz output clock of USB2 PHY to become stable after turn on it, the delay time is pretty long for something that's supposed to be "atomic" like a clk_enable(). Consider that clk_enable() will disable interrupt and that a 1ms interrupt latency is not sensible. The 480MHz output clock should be handled in prepare callbacks which support gate a clk if the operation may sleep. Signed-off-by: William Wu <wulf@rock-chips.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: rockchip-inno-usb2: support otg-port for rk3399William Wu2016-11-181-30/+561
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The rk3399 SoC USB2 PHY is comprised of one Host port and one OTG port. And OTG port is for USB2.0 part of USB3.0 OTG controller, as a part to construct a fully feature Type-C subsystem. With this patch, we can support OTG port with the following functions: - Support BC1.2 charger detect, and use extcon notifier to send USB charger types to power driver. - Support PHY suspend for power management. - Support OTG Host only mode. Signed-off-by: William Wu <wulf@rock-chips.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: meson8b-usb2: request a shared reset lineMartin Blumenstingl2016-11-181-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Both PHYs are sharing one reset line. With recent improvements to the reset framework we can now also use reset_control_reset with shared resets. This allows us to drop some workarounds where the reset was only specified for one PHY but not the other, to make sure that the reset it only executed once (as the reset framework was not able to use reset_control_reset with shared reset lines). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: meson8b-usb2: fix missing clk_disable_unprepare() on errorWei Yongjun2016-11-181-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | Fix the missing clk_disable_unprepare() before return from phy_meson8b_usb2_power_on() in the error handling case. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: meson: add USB2 PHY support for Meson8b and GXBBMartin Blumenstingl2016-11-183-0/+298
| | | | | | | | | | | | | | | | | | | | | | | | | | | This is a new driver for the USB PHY found in Meson8b and GXBB SoCs. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | | phy: twl4030-usb: Fix for musb session bit based PMTony Lindgren2016-11-171-2/+2
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now with musb driver implementing generic session bit based PM, we need to have the USB PHYs behaving in a sane way for platforms implementing PM. Currently twl4030-usb enables PM in twl4030_phy_power_on() and then disables it in twl4030_phy_power_off(). This will block PM runtime for the SoC when no cable is connected. Fix the issue by moving PM runtime autosuspend call to happen where it gets called in twl4030_phy_power_on(). Note that this patch should not be backported to anything before commit 467d5c980709 ("usb: musb: Implement session bit based runtime PM for musb-core") as before that all the glue layers implemented their own PM. Fixes: 467d5c980709 ("usb: musb: Implement session bit based runtime PM for musb-core") Tested-by: Ladislav Michl <ladis@linux-mips.org> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OpenPOWER on IntegriCloud