summaryrefslogtreecommitdiffstats
path: root/drivers/pci/bus.c
Commit message (Collapse)AuthorAgeFilesLines
* PCI: Clear IORESOURCE_UNSET when clipping a bridge windowBjorn Helgaas2015-09-221-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | c770cb4cb505 ("PCI: Mark invalid BARs as unassigned") sets IORESOURCE_UNSET if we fail to claim a resource. If we tried to claim a bridge window, failed, clipped the window, and tried to claim the clipped window, we failed again because of IORESOURCE_UNSET: pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] pci 0000:00:01.0: can't claim BAR 15 [mem 0xbdf00000-0xddefffff 64bit pref]: no compatible bridge window pci 0000:00:01.0: [mem size 0x20000000 64bit pref] clipped to [mem size 0x1df00000 64bit pref] pci 0000:00:01.0: bridge window [mem size 0x1df00000 64bit pref] pci 0000:00:01.0: can't claim BAR 15 [mem size 0x1df00000 64bit pref]: no address assigned The 00:01.0 window started as [mem 0xbdf00000-0xddefffff 64bit pref]. That starts before the host bridge window [mem 0xc0000000-0xffffffff window], so we clipped the 00:01.0 window to [mem 0xc0000000-0xddefffff 64bit pref]. But we left it marked IORESOURCE_UNSET, so the second claim failed when it should have succeeded. This means downstream devices will also fail for lack of resources, e.g., in the bugzilla below, radeon 0000:01:00.0: Fatal error during GPU init Clear IORESOURCE_UNSET when we clip a bridge window. Also clear IORESOURCE_UNSET in our copy of the unclipped window so we can see exactly what the original window was and how it now fits inside the upstream window. Fixes: c770cb4cb505 ("PCI: Mark invalid BARs as unassigned") Link: https://bugzilla.kernel.org/show_bug.cgi?id=85491#c47 Based-on-patch-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Based-on-patch-by: Yinghai Lu <yinghai@kernel.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Yinghai Lu <yinghai@kernel.org> CC: stable@vger.kernel.org # v4.1+
* PCI: Add pci_bus_addr_tYinghai Lu2015-05-291-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | David Ahern reported that d63e2e1f3df9 ("sparc/PCI: Clip bridge windows to fit in upstream windows") fails to boot on sparc/T5-8: pci 0000:06:00.0: reg 0x184: can't handle BAR above 4GB (bus address 0x110204000) The problem is that sparc64 assumed that dma_addr_t only needed to hold DMA addresses, i.e., bus addresses returned via the DMA API (dma_map_single(), etc.), while the PCI core assumed dma_addr_t could hold *any* bus address, including raw BAR values. On sparc64, all DMA addresses fit in 32 bits, so dma_addr_t is a 32-bit type. However, BAR values can be 64 bits wide, so they don't fit in a dma_addr_t. d63e2e1f3df9 added new checking that tripped over this mismatch. Add pci_bus_addr_t, which is wide enough to hold any PCI bus address, including both raw BAR values and DMA addresses. This will be 64 bits on 64-bit platforms and on platforms with a 64-bit dma_addr_t. Then dma_addr_t only needs to be wide enough to hold addresses from the DMA API. [bhelgaas: changelog, bugzilla, Kconfig to ensure pci_bus_addr_t is at least as wide as dma_addr_t, documentation] Fixes: d63e2e1f3df9 ("sparc/PCI: Clip bridge windows to fit in upstream windows") Fixes: 23b13bc76f35 ("PCI: Fail safely if we can't handle BARs larger than 4GB") Link: http://lkml.kernel.org/r/CAE9FiQU1gJY1LYrxs+ma5LCTEEe4xmtjRG0aXJ9K_Tsu+m9Wuw@mail.gmail.com Link: http://lkml.kernel.org/r/1427857069-6789-1-git-send-email-yinghai@kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=96231 Reported-by: David Ahern <david.ahern@oracle.com> Tested-by: David Ahern <david.ahern@oracle.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: David S. Miller <davem@davemloft.net> CC: stable@vger.kernel.org # v3.19+
* PCI: Use common resource list management code instead of private implementationJiang Liu2015-02-051-12/+6
| | | | | | | | | | Use common resource list management data structure and interfaces instead of private implementation. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* PCI: Add pci_bus_clip_resource() to clip to fit upstream windowYinghai Lu2015-01-161-0/+43
| | | | | | | | | | | | | | | Add pci_bus_clip_resource(). If a PCI-PCI bridge window overlaps an upstream bridge window but is not completely contained by it, this clips the downstream window so it fits inside the upstream one. No functional change (this adds the function but no callers). [bhelgaas: changelog, split into separate patch] Link: https://bugzilla.kernel.org/show_bug.cgi?id=85491 Reported-by: Marek Kordik <kordikmarek@gmail.com> Fixes: 5b28541552ef ("PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.16+
* PCI: Move EXPORT_SYMBOL so it immediately follows function/variableRyan Desfosses2014-06-101-3/+3
| | | | | | | | | Move EXPORT_SYMBOL so it immediately follows the function or variable. No functional change. [bhelgaas: squash similar changes, fix hotplug, probe, rom, search, too] Signed-off-by: Ryan Desfosses <ryan@desfo.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: Make pci_bus_add_device() voidYijing Wang2014-05-301-8/+2
| | | | | | | | | pci_bus_add_device() always returns 0, so there's no point in returning anything at all. Make it a void function and remove the tests of the return value from the callers. [bhelgaas: changelog, remove unused "err" from i82875p_setup_overfl_dev()] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: Remove unnecessary includes of <linux/init.h>Paul Gortmaker2014-04-141-1/+0
| | | | | | | | | None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: Change pci_bus_alloc_resource() type_mask to unsigned longBjorn Helgaas2014-03-191-2/+2
| | | | | | | | | The pci_bus_alloc_resource() "type_mask" parameter is used to compare with the "flags" member of a struct resource, so it should be the same type, namely "unsigned long". No functional change because all current IORESOURCE_* flags fit in 32 bits. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region()Bjorn Helgaas2014-03-191-1/+1
| | | | | | | | | | | | | | | | When allocating space from a bus resource, i.e., from apertures leading to this bus, make sure the entire resource type matches. The previous code assumed the IORESOURCE_TYPE_BITS field was a bitmask with only a single bit set, but this is not true. IORESOURCE_TYPE_BITS is really an enumeration, and we have to check all the bits. See 72dcb1197228 ("resources: Add register address resource type"). No functional change. If we used this path for allocating IRQs, DMA channels, or bus numbers, this would fix a bug because those types are indistinguishable when masked by IORESOURCE_IO | IORESOURCE_MEM. But we don't, so this shouldn't make any difference. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: Don't check resource_size() in pci_bus_alloc_resource()Bjorn Helgaas2014-03-191-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Paul reported that after f75b99d5a77d ("PCI: Enforce bus address limits in resource allocation") on a 32-bit kernel (CONFIG_PHYS_ADDR_T_64BIT not set), intel-gtt complained "can't ioremap flush page - no chipset flushing". In addition, other PCI resource allocations, e.g., for bridge windows, failed. This happens because we incorrectly skip bus resources of [mem 0x00000000-0xffffffff] because we think they are of size zero. When resource_size_t is 32 bits wide, resource_size() on [mem 0x00000000-0xffffffff] returns 0 because (r->end - r->start + 1) overflows. Therefore, we can't use "resource_size() == 0" to decide that allocation from this resource will fail. allocate_resource() should fail anyway if it can't satisfy the address constraints, so we should just depend on that. A [mem 0x00000000-0xffffffff] bus resource is obviously not really valid, but we do fall back to it as a default when we don't have information about host bridge apertures. Link: https://bugzilla.kernel.org/show_bug.cgi?id=71611 Fixes: f75b99d5a77d PCI: Enforce bus address limits in resource allocation Reported-and-tested-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* Merge branch 'pci/resource' into nextBjorn Helgaas2014-01-101-30/+102
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/resource: PCI: Allocate 64-bit BARs above 4G when possible PCI: Enforce bus address limits in resource allocation PCI: Split out bridge window override of minimum allocation address agp/ati: Use PCI_COMMAND instead of hard-coded 4 agp/intel: Use CPU physical address, not bus address, for ioremap() agp/intel: Use pci_bus_address() to get GTTADR bus address agp/intel: Use pci_bus_address() to get MMADR bus address agp/intel: Support 64-bit GMADR agp/intel: Rename gtt_bus_addr to gtt_phys_addr drm/i915: Rename gtt_bus_addr to gtt_phys_addr agp: Use pci_resource_start() to get CPU physical address for BAR agp: Support 64-bit APBASE PCI: Add pci_bus_address() to get bus address of a BAR PCI: Convert pcibios_resource_to_bus() to take a pci_bus, not a pci_dev PCI: Change pci_bus_region addresses to dma_addr_t
| * PCI: Allocate 64-bit BARs above 4G when possibleYinghai Lu2014-01-071-3/+13
| | | | | | | | | | | | | | | | | | Try to allocate space for 64-bit BARs above 4G first, to preserve the space below 4G for 32-bit BARs. If there's no space above 4G available, fall back to allocating anywhere. [bhelgaas: reworked starting from http://lkml.kernel.org/r/1387485843-17403-2-git-send-email-yinghai@kernel.org] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * PCI: Enforce bus address limits in resource allocationYinghai Lu2014-01-071-28/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When allocating space for 32-bit BARs, we previously limited RESOURCE addresses so they would fit in 32 bits. However, the BUS address need not be the same as the resource address, and it's the bus address that must fit in the 32-bit BAR. This patch adds: - pci_clip_resource_to_region(), which clips a resource so it contains only the range that maps to the specified bus address region, e.g., to clip a resource to 32-bit bus addresses, and - pci_bus_alloc_from_region(), which allocates space for a resource from the specified bus address region, and changes pci_bus_alloc_resource() to allocate space for 64-bit BARs from the entire bus address region, and space for 32-bit BARs from only the bus address region below 4GB. If we had this window: pci_root HWP0002:0a: host bridge window [mem 0xf0180000000-0xf01fedfffff] (bus address [0x80000000-0xfedfffff]) we previously could not put a 32-bit BAR there, because the CPU addresses don't fit in 32 bits. This patch fixes this, so we can use this space for 32-bit BARs. It's also possible (though unlikely) to have resources with 32-bit CPU addresses but bus addresses above 4GB. In this case the previous code would allocate space that a 32-bit BAR could not map. Remove PCIBIOS_MAX_MEM_32, which is no longer used. [bhelgaas: reworked starting from http://lkml.kernel.org/r/1386658484-15774-3-git-send-email-yinghai@kernel.org] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * PCI: Split out bridge window override of minimum allocation addressBjorn Helgaas2014-01-071-4/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | pci_bus_alloc_resource() avoids allocating space below the "min" supplied by the caller (usually PCIBIOS_MIN_IO or PCIBIOS_MIN_MEM). This is to protect badly documented motherboard resources. But if we're allocating space inside an already-configured PCI-PCI bridge window, we ignore "min". See 688d191821de ("pci: make bus resource start address override minimum IO address"). This patch moves the check to make it more visible and simplify future patches. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | PCI: Move pci_proc_attach_device() to pci_bus_add_device()Yinghai Lu2013-12-181-0/+1
|/ | | | | | | | | | | | | | 4f535093cf8f ("PCI: Put pci_dev in device tree as early as possible") moved pci_proc_attach_device() from pci_bus_add_device() to pci_device_add(). This moves it back to pci_bus_add_device(), essentially reverting that part of 4f535093cf8f. This makes it symmetric with pci_stop_dev(), where we call pci_proc_detach_device() and pci_remove_sysfs_dev_files() and set dev->is_added = 0. [bhelgaas: changelog, create sysfs then attach proc for symmetry] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: Delay enabling bridges until they're neededYinghai Lu2013-07-251-19/+0
| | | | | | | | | | | | | We currently enable PCI bridges after scanning a bus and assigning resources. This is often done in arch code. This patch changes this so we don't enable a bridge until necessary, i.e., until we enable a PCI device behind the bridge. We do this in the generic pci_enable_device() path, so this also removes the arch-specific code to enable bridges. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: Introduce pci_bus_{get|put}() to manage PCI bus reference countJiang Liu2013-05-271-0/+15
| | | | | | | | | Introduce helper functions pci_bus_{get|put}() to manage PCI bus reference count. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: Delay final fixups until resources are assignedYinghai Lu2013-05-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Commit 4f535093cf "PCI: Put pci_dev in device tree as early as possible" moved final fixups from pci_bus_add_device() to pci_device_add(). But pci_device_add() happens before resource assignment, so BARs may not be valid yet. Typical flow for hot-add: pciehp_configure_device pci_scan_slot pci_scan_single_device pci_device_add pci_fixup_device(pci_fixup_final, dev) # previous location # resource assignment happens here pci_bus_add_devices pci_bus_add_device pci_fixup_device(pci_fixup_final, dev) # new location [bhelgaas: changelog, move fixups to pci_bus_add_device()] Reference: https://lkml.kernel.org/r/20130415182614.GB9224@xanatos Reported-by: David Bulkow <David.Bulkow@stratus.com> Tested-by: David Bulkow <David.Bulkow@stratus.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.9+
* Merge branch 'pci/cleanup' into nextBjorn Helgaas2013-04-171-0/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/cleanup: PCI: Remove "extern" from function declarations PCI: Warn about failures instead of "must_check" functions PCI: Remove __must_check from definitions PCI: Remove unused variables PCI: Move cpci_hotplug_init() proto to header file PCI: Make local functions/structs static PCI: Fix missing prototype for pcie_port_acpi_setup() Conflicts: drivers/pci/hotplug/acpiphp.h include/linux/pci.h
| * PCI: Warn about failures instead of "must_check" functionsBjorn Helgaas2013-04-171-0/+3
| | | | | | | | | | | | | | | | These places capture return values to avoid "must_check" warnings, but we didn't *do* anything with the return values, which causes "set but not used" warnings. We might as well do something instead of just trying to evade the "must_check" warnings. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | PCI: Clean up usages of pci_bus->is_addedJiang Liu2013-04-121-9/+2
|/ | | | | | | | | | | Now pci_bus->is_added is only used to guard invoking of pcibios_fixup_bus() in pci_scan_child_bus(), so just set it directly after the fixups and remove the other test and set in pci_bus_add_devices(). [bhelgaas: changelog] Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Yinghai Lu <yinghai@kernel.org>
* PCI: Put pci_dev in device tree as early as possibleYinghai Lu2013-01-251-66/+12
| | | | | | | | | | | | | | | | | | | We want to put pci_dev structs in the device tree as soon as possible so for_each_pci_dev() iteration will not miss them, but driver attachment needs to be delayed until after pci_assign_unassigned_resources() to make sure all devices have resources assigned first. This patch moves device registering from pci_bus_add_devices() to pci_device_add(), which happens earlier, leaving driver attachment in pci_bus_add_devices(). It also removes unattached child bus handling in pci_bus_add_devices(). That's not needed because child bus via pci_add_new_bus() is already in parent bus children list. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* PCI: Skip attaching driver in device_add()Yinghai Lu2013-01-251-0/+5
| | | | | | | | | | | | | | | | | | | | | | We want to add PCI devices to the device tree as early as possible but delay attaching drivers. device_add() adds a device to the device hierarchy and (via device_attach()) attaches a matching driver and calls its .probe() method. We want to separate adding the device to the hierarchy from attaching the driver. This patch does that by adding "match_driver" in struct pci_dev. When false, we return failure from pci_bus_match(), which makes device_attach() believe there's no matching driver. Later, we set "match_driver = true" and call device_attach() again, which now attaches the driver and calls its .probe() method. [bhelgaas: changelog, explicitly init dev->match_driver, fold device_attach() call into pci_bus_add_device()] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* PCI/ACPI: Reserve firmware-allocated resources for hot-added root busesYinghai Lu2013-01-071-0/+2
| | | | | | | | Firmware may have assigned PCI BARs for hot-added devices, so reserve those resources before trying to allocate more. [bhelgaas: move empty weak definition here] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* Merge branch 'pci/mjg-pci-roms-from-efi' into nextBjorn Helgaas2012-12-061-0/+5
|\ | | | | | | | | | | | | | | * pci/mjg-pci-roms-from-efi: x86: Use PCI setup data PCI: Add support for non-BAR ROMs PCI: Add pcibios_add_device EFI: Stash ROMs if they're not in the PCI BAR
| * PCI: Add pcibios_add_deviceMatthew Garrett2012-12-051-0/+5
| | | | | | | | | | | | | | | | | | Platforms may want to provide architecture-specific functionality during PCI enumeration. Add a pcibios_add_device() call that architectures can override to do so. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Seth Forshee <seth.forshee@canonical.com>
* | PCI/PM: Fix deadlock when unbinding device if parent in D3coldHuang Ying2012-11-021-3/+0
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a PCI device and its parents are put into D3cold, unbinding the device will trigger deadlock as follow: - driver_unbind - device_release_driver - device_lock(dev) <--- previous lock here - __device_release_driver - pm_runtime_get_sync ... - rpm_resume(dev) - rpm_resume(dev->parent) ... - pci_pm_runtime_resume ... - pci_set_power_state - __pci_start_power_transition - pci_wakeup_bus(dev->parent->subordinate) - pci_walk_bus - device_lock(dev) <--- deadlock here If we do not do device_lock in pci_walk_bus, we can avoid deadlock. Device_lock in pci_walk_bus is introduced in commit: d71374dafbba7ec3f67371d3b7e9f6310a588808, corresponding email thread is: https://lkml.org/lkml/2006/5/26/38. The patch author Zhang Yanmin said device_lock is added to pci_walk_bus because: Some error handling functions call pci_walk_bus. For example, PCIe aer. Here we lock the device, so the driver wouldn't detach from the device, as the cb might call driver's callback function. So I fixed the deadlock as follows: - remove device_lock from pci_walk_bus - add device_lock into callback if callback will call driver's callback I checked pci_walk_bus users one by one, and found only PCIe aer needs device lock. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org # v3.6+ CC: Zhang Yanmin <yanmin.zhang@intel.com>
* PCI: Use correct type when freeing bus resource listYinghai Lu2012-09-181-1/+5
| | | | | | | | | | | | | | | | | | | Should use struct pci_bus_resource instead of struct pci_host_bridge_window Commit 45ca9e9730 ("PCI: add helpers for building PCI bus resource lists") added pci_free_resource_list() and used it in pci_bus_remove_resources(). Later it was also used for host bridge aperture lists, which was fine until commit 0efd5aab41 ("PCI: add struct pci_host_bridge_window with CPU/bus address offset"). That commit added offset information, so we needed a struct pci_host_bridge_window that was separate from struct pci_bus_resource. Commit 0efd5aab41 should have split the host bridge aperture users of pci_free_resource_list() from the pci_bus_resource user (pci_bus_remove_resources()), but it did not. [bhelgaas: changelog -- 0efd5aab41 was mine, so this is all my fault] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: fix undefined reference to 'pci_fixup_final_inited'Myron Stowe2012-07-161-3/+1
| | | | | | | | | | | | | | | | | | | | My "PCI: Integrate 'pci_fixup_final' quirks into hot-plug paths" patch introduced an undefined reference to 'pci_fixup_final_inited' when CONFIG_PCI_QUIRKS is not enabled (on x86_64): drivers/built-in.o: In function `pci_bus_add_device': (.text+0x4f62): undefined reference to `pci_fixup_final_inited' This patch removes the external reference ending up with a result closer to what we ultimately want when the boot path issues described in the original patch are resolved. References: https://lkml.org/lkml/2012/7/9/542 Original, offending, patch https://lkml.org/lkml/2012/7/12/338 Randy's catch Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net>
* PCI: call final fixups hot-added devicesMyron Stowe2012-07-091-0/+4
| | | | | | | | | | | | | | | | | | | Final fixups are currently applied only at boot-time by pci_apply_final_quirks(), which is an fs_initcall(). Hot-added devices don't get these fixups, so they may not be completely initialized. This patch makes us run final fixups for hot-added devices in pci_bus_add_device() just before the new device becomes eligible for driver binding. This patch keeps the fs_initcall() for devices present at boot because we do resource assignment between pci_bus_add_device and the fs_initcall(), and we don't want to break any fixups that depend on that assignment. This is a design issue that may be addressed in the future -- any resource assignment should be done *before* device_add(). [bhelgaas: changelog] Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: add struct pci_host_bridge_window with CPU/bus address offsetBjorn Helgaas2012-02-231-11/+19
| | | | | | | | | | | | | Some PCI host bridges apply an address offset, so bus addresses on PCI are different from CPU addresses. This patch adds a way for architectures to tell the PCI core about this offset. For example: LIST_HEAD(resources); pci_add_resource_offset(&resources, host->io_space, host->io_offset); pci_add_resource_offset(&resources, host->mem_space, host->mem_offset); pci_scan_root_bus(parent, bus, ops, sysdata, &resources); Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: add helpers for building PCI bus resource listsBjorn Helgaas2012-01-061-5/+27
| | | | | | | | | | | | | | | We'd like to supply a list of resources when we create a new PCI bus, e.g., the root bus under a PCI host bridge. These are helpers for constructing that list. These are exported because the plan is to replace this exported interface: pci_scan_bus_parented() with this one: pci_add_resource(resources, ...) pci_scan_root_bus(..., resources) Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI/sysfs: move bus cpuaffinity to class dev_attrsYinghai Lu2011-05-211-6/+0
| | | | | | | | | Requested by Greg KH to fix a race condition in the creating of PCI bus cpuaffinity files. Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Revert "PCI: allocate bus resources from the top down"Bjorn Helgaas2010-12-171-48/+5
| | | | | | | | | | | This reverts commit b126b4703afa4010b161784a43650337676dd03b. We're going back to the old behavior of allocating from bus resources in _CRS order. Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Revert "PCI: fix pci_bus_alloc_resource() hang, prefer positive decode"Bjorn Helgaas2010-12-171-49/+21
| | | | | | | | | | | | This reverts commit 82e3e767c21fef2b1b38868e20eb4e470a1e38e3. We're going back to considering bus resources in the order we found them (in _CRS order, when we're using _CRS), so we don't need to define any ordering. Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: fix pci_bus_alloc_resource() hang, prefer positive decodeBjorn Helgaas2010-11-121-21/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a PCI bus has two resources with the same start/end, e.g., pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd7ffffff pref] pci_bus 0000:04: resource 7 [mem 0xd0000000-0xd7ffffff] the previous pci_bus_find_resource_prev() implementation would alternate between them forever: pci_bus_find_resource_prev(... [mem 0xd0000000-0xd7ffffff pref]) returns [mem 0xd0000000-0xd7ffffff] pci_bus_find_resource_prev(... [mem 0xd0000000-0xd7ffffff]) returns [mem 0xd0000000-0xd7ffffff pref] pci_bus_find_resource_prev(... [mem 0xd0000000-0xd7ffffff pref]) returns [mem 0xd0000000-0xd7ffffff] ... This happened because there was no ordering between two resources with the same start and end. A resource that had the same start and end as the cursor, but was not itself the cursor, was considered to be before the cursor. This patch fixes the hang by making a fixed ordering between any two resources. In addition, it tries to allocate from positively decoded regions before using any subtractively decoded resources. This means we will use a positive decode region before a subtractive decode one, even if it means using a smaller address. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=22062 Reported-by: Borislav Petkov <bp@amd64.org> Tested-by: Borislav Petkov <bp@amd64.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Merge branch 'stable/xen-pcifront-0.8.2' of ↵Linus Torvalds2010-10-281-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen and branch 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm * 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm: xen: register xen pci notifier xen: initialize cpu masks for pv guests in xen_smp_init xen: add a missing #include to arch/x86/pci/xen.c xen: mask the MTRR feature from the cpuid xen: make hvc_xen console work for dom0. xen: add the direct mapping area for ISA bus access xen: Initialize xenbus for dom0. xen: use vcpu_ops to setup cpu masks xen: map a dummy page for local apic and ioapic in xen_set_fixmap xen: remap MSIs into pirqs when running as initial domain xen: remap GSIs as pirqs when running as initial domain xen: introduce XEN_DOM0 as a silent option xen: map MSIs into pirqs xen: support GSI -> pirq remapping in PV on HVM guests xen: add xen hvm acpi_register_gsi variant acpi: use indirect call to register gsi in different modes xen: implement xen_hvm_register_pirq xen: get the maximum number of pirqs from xen xen: support pirq != irq * 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (27 commits) X86/PCI: Remove the dependency on isapnp_disable. xen: Update Makefile with CONFIG_BLOCK dependency for biomerge.c MAINTAINERS: Add myself to the Xen Hypervisor Interface and remove Chris Wright. x86: xen: Sanitse irq handling (part two) swiotlb-xen: On x86-32 builts, select SWIOTLB instead of depending on it. MAINTAINERS: Add myself for Xen PCI and Xen SWIOTLB maintainer. xen/pci: Request ACS when Xen-SWIOTLB is activated. xen-pcifront: Xen PCI frontend driver. xenbus: prevent warnings on unhandled enumeration values xenbus: Xen paravirtualised PCI hotplug support. xen/x86/PCI: Add support for the Xen PCI subsystem x86: Introduce x86_msi_ops msi: Introduce default_[teardown|setup]_msi_irqs with fallback. x86/PCI: Export pci_walk_bus function. x86/PCI: make sure _PAGE_IOMAP it set on pci mappings x86/PCI: Clean up pci_cache_line_size xen: fix shared irq device passthrough xen: Provide a variant of xen_poll_irq with timeout. xen: Find an unbound irq number in reverse order (high to low). xen: statically initialize cpu_evtchn_mask_p ... Fix up trivial conflicts in drivers/pci/Makefile
| * x86/PCI: Export pci_walk_bus function.Konrad Rzeszutek Wilk2010-10-181-0/+1
| | | | | | | | | | | | | | | | | | | | In preperation of modularizing Xen-pcifront the pci_walk_bus needs to be exported so that the xen-pcifront module can walk call the pci subsystem to walk the PCI devices and claim them. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> [http://marc.info/?l=linux-pci&m=126149958010298&w=2]
* | PCI: allocate bus resources from the top downBjorn Helgaas2010-10-261-5/+48
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allocate space from the highest-address PCI bus resource first, then work downward. Previously, we looked for space in PCI host bridge windows in the order we discovered the windows. For example, given the following windows (discovered via an ACPI _CRS method): pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000effff] pci_root PNP0A03:00: host bridge window [mem 0x000f0000-0x000fffff] pci_root PNP0A03:00: host bridge window [mem 0xbff00000-0xf7ffffff] pci_root PNP0A03:00: host bridge window [mem 0xff980000-0xff980fff] pci_root PNP0A03:00: host bridge window [mem 0xff97c000-0xff97ffff] pci_root PNP0A03:00: host bridge window [mem 0xfed20000-0xfed9ffff] we attempted to allocate from [mem 0x000a0000-0x000bffff] first, then [mem 0x000c0000-0x000effff], and so on. With this patch, we allocate from [mem 0xff980000-0xff980fff] first, then [mem 0xff97c000-0xff97ffff], [mem 0xfed20000-0xfed9ffff], etc. Allocating top-down follows Windows practice, so we're less likely to trip over BIOS defects in the _CRS description. On the machine above (a Dell T3500), the [mem 0xbff00000-0xbfffffff] region doesn't actually work and is likely a BIOS defect. The symptom is that we move the AHCI controller to 0xbff00000, which leads to "Boot has failed, sleeping forever," a BUG in ahci_stop_engine(), or some other boot failure. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=16228#c43 Reference: https://bugzilla.redhat.com/show_bug.cgi?id=620313 Reference: https://bugzilla.redhat.com/show_bug.cgi?id=629933 Reported-by: Brian Bloniarz <phunge0@hotmail.com> Reported-and-tested-by: Stefan Becker <chemobejk@gmail.com> Reported-by: Denys Vlasenko <dvlasenk@redhat.com> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: check return value of pci_enable_device() when enabling bridgesJunchang Wang2010-07-301-0/+2
| | | | | | | | | pci_enable_device can fail. In that case, a printed warning would be more appropriate. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Junchang Wang <junchangwang@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: sparse warning (trivial)Stephen Hemminger2010-07-301-1/+1
| | | | | | | Assigning zero where NULL should be used. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* Driver core: create lock/unlock functions for struct deviceGreg Kroah-Hartman2010-03-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the future, we are going to be changing the lock type for struct device (once we get the lockdep infrastructure properly worked out) To make that changeover easier, and to possibly burry the lock in a different part of struct device, let's create some functions to lock and unlock a device so that no out-of-core code needs to be changed in the future. This patch creates the device_lock/unlock/trylock() functions, and converts all in-tree users to them. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jean Delvare <khali@linux-fr.org> Cc: Dave Young <hidave.darkstar@gmail.com> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <len.brown@intel.com> Cc: Magnus Damm <damm@igel.co.jp> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Alex Chiang <achiang@hp.com> Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Patterson <andrew.patterson@hp.com> Cc: Yu Zhao <yu.zhao@intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: CHENG Renquan <rqcheng@smu.edu.sg> Cc: Oliver Neukum <oliver@neukum.org> Cc: Frans Pop <elendil@planet.nl> Cc: David Vrabel <david.vrabel@csr.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: augment bus resource table with a listBjorn Helgaas2010-02-231-0/+46
| | | | | | | | | | | | | | | | | | | | | | | | Previously we used a table of size PCI_BUS_NUM_RESOURCES (16) for resources forwarded to a bus by its upstream bridge. We've increased this size several times when the table overflowed. But there's no good limit on the number of resources because host bridges and subtractive decode bridges can forward any number of ranges to their secondary buses. This patch reduces the table to only PCI_BRIDGE_RESOURCE_NUM (4) entries, which corresponds to the number of windows a PCI-to-PCI (3) or CardBus (4) bridge can positively decode. Any additional resources, e.g., PCI host bridge windows or subtractively-decoded regions, are kept in a list. I'd prefer a single list rather than this split table/list approach, but that requires simultaneous changes to every architecture. This approach only requires immediate changes where we set up (a) host bridges with more than four windows and (b) subtractive-decode P2P bridges, and we can incrementally change other architectures to use the list. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: add pci_bus_for_each_resource(), remove direct bus->resource[] refsBjorn Helgaas2010-02-231-2/+2
| | | | | | | | | | | | No functional change; this converts loops that iterate from 0 to PCI_BUS_NUM_RESOURCES through pci_bus resource[] table to use the pci_bus_for_each_resource() iterator instead. This doesn't change the way resources are stored; it merely removes dependencies on the fact that they're in a table. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* resource/PCI: mark struct resource as constDominik Brodowski2010-02-221-1/+1
| | | | | | | | | | | Now that we return the new resource start position, there is no need to update "struct resource" inside the align function. Therefore, mark the struct resource as const. Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* resource/PCI: align functions now return start of resourceDominik Brodowski2010-02-221-2/+4
| | | | | | | | | | | As suggested by Linus, align functions should return the start of a resource, not void. An update of "res->start" is no longer necessary. Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI AER: support Multiple Error Received and no error source idZhang, Yanmin2009-06-161-2/+9
| | | | | | | | | | | | | | | | | | | | Based on PCI Express AER specs, a root port might receive multiple TLP errors while it could only save a correctable error source id and an uncorrectable error source id at the same time. In addition, some root port hardware might be unable to provide a correct source id, i.e., the source id, or the bus id part of the source id provided by root port might be equal to 0. The patchset implements the support in kernel by searching the device tree under the root port. Patch 1 changes parameter cb of function pci_walk_bus to return a value. When cb return non-zero, pci_walk_bus stops more searching on the device tree. Reviewed-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Zhang Yanmin <yanmin_zhang@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI/x86: don't assume prefetchable ranges are 64bitYinghai Lu2009-06-111-1/+6
| | | | | | | | | | | | | | | We should not assign 64bit ranges to PCI devices that only take 32bit prefetchable addresses. Try to set IORESOURCE_MEM_64 in 64bit resource of pci_device/pci_bridge and make the bus resource only have that bit set when all devices under it support 64bit prefetchable memory. Use that flag to allocate resources from that range. Reported-by: Yannick <yannick.roehlly@free.fr> Reviewed-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Setup disabled bridges even if buses are addedYuji Shimada2009-04-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch sets up disabled bridges even if buses have already been added. pci_assign_unassigned_resources is called after buses are added. pci_assign_unassigned_resources calls pci_bus_assign_resources. pci_bus_assign_resources calls pci_setup_bridge to configure BARs of bridges. Currently pci_setup_bridge returns immediately if the bus have already been added. So pci_assign_unassigned_resources can't configure BARs of bridges that were added in a disabled state; this patch fixes the issue. On logical hot-add, we need to prevent the kernel from re-initializing bridges that have already been initialized. To achieve this, pci_setup_bridge returns immediately if the bridge have already been enabled. We don't need to check whether the specified bus is a root bus or not. pci_setup_bridge is not called on a root bus, because a root bus does not have a bridge. The patch adds a new helper function, pci_is_enabled. I made the function name similar to pci_is_managed. The codes which use enable_cnt directly are changed to use pci_is_enabled. Acked-by: Alex Chiang <achiang@hp.com> Signed-off-by: Yuji Shimada <shimada-yxb@necst.nec.co.jp> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
OpenPOWER on IntegriCloud