summaryrefslogtreecommitdiffstats
path: root/drivers/net/usb
Commit message (Collapse)AuthorAgeFilesLines
* ipheth: Add support for iPad 2 and iPad 3Kristian Evensen2014-06-021-0/+10
| | | | | | | | | | Each iPad model has a different product id, this patch adds support for iPad 2 (pid 0x12a2) and iPad 3 (pid 0x12a6). Note that iPad 2 must be jailbroken and a third-party app must be used for tethering to work. On iPad 3, tethering works out of the box (assuming your ISP is nice). Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qmi_wwan: interface #11 in Sierra Wireless MC73xx is not QMIAleksander Morgado2014-06-021-1/+0
| | | | | | | | | | This interface is unusable, as the cdc-wdm character device doesn't reply to any QMI command. Also, the out-of-tree Sierra Wireless GobiNet driver fully skips it. Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qmi_wwan: add additional Sierra Wireless QMI devicesAleksander Morgado2014-06-021-0/+4
| | | | | | | | | A set of new VID/PIDs retrieved from the out-of-tree GobiNet/GobiSerial Sierra Wireless drivers. Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qmi_wwan: add Netgear AirCard 341UAleksander Morgado2014-06-011-0/+1
| | | | | | Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: cdc_mbim: handle unaccelerated VLAN tagged framesBjørn Mork2014-05-091-11/+28
| | | | | | | | | | | | | | | | This driver maps 802.1q VLANs to MBIM sessions. The mapping is based on a bogus assumption that all tagged frames will use the acceleration API because we enable NETIF_F_HW_VLAN_CTAG_TX. This fails for e.g. frames tagged in userspace using packet sockets. Such frames will erroneously be considered as untagged and silently dropped based on not being IP. Fix by falling back to looking into the ethernet header for a tag if no accelerated tag was found. Fixes: a82c7ce5bc5b ("net: cdc_ncm: map MBIM IPS SessionID to VLAN ID") Cc: Greg Suarez <gsuarez@smithmicro.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: cdc_mbim: __vlan_find_dev_deep need rcu_read_lockBjørn Mork2014-05-071-5/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes this warning introduced by commit 5b8f15f78e6f ("net: cdc_mbim: handle IPv6 Neigbor Solicitations"): =============================== [ INFO: suspicious RCU usage. ] 3.15.0-rc3 #213 Tainted: G W O ------------------------------- net/8021q/vlan_core.c:69 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 1 no locks held by ksoftirqd/0/3. stack backtrace: CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: G W O 3.15.0-rc3 #213 Hardware name: LENOVO 2776LEG/2776LEG, BIOS 6EET55WW (3.15 ) 12/19/2011 0000000000000001 ffff880232533bf0 ffffffff813a5ee6 0000000000000006 ffff880232530090 ffff880232533c20 ffffffff81076b94 0000000000000081 0000000000000000 ffff8802085ac000 ffff88007fc8ea00 ffff880232533c50 Call Trace: [<ffffffff813a5ee6>] dump_stack+0x4e/0x68 [<ffffffff81076b94>] lockdep_rcu_suspicious+0xfa/0x103 [<ffffffff813978a6>] __vlan_find_dev_deep+0x54/0x94 [<ffffffffa04a1938>] cdc_mbim_rx_fixup+0x379/0x66a [cdc_mbim] [<ffffffff813ab76f>] ? _raw_spin_unlock_irqrestore+0x3a/0x49 [<ffffffff81079671>] ? trace_hardirqs_on_caller+0x192/0x1a1 [<ffffffffa059bd10>] usbnet_bh+0x59/0x287 [usbnet] [<ffffffff8104067d>] tasklet_action+0xbb/0xcd [<ffffffff81040057>] __do_softirq+0x14c/0x30d [<ffffffff81040237>] run_ksoftirqd+0x1f/0x50 [<ffffffff8105f13e>] smpboot_thread_fn+0x172/0x18e [<ffffffff8105efcc>] ? SyS_setgroups+0xdf/0xdf [<ffffffff810594b0>] kthread+0xb5/0xbd [<ffffffff813a84b1>] ? __wait_for_common+0x13b/0x170 [<ffffffff810593fb>] ? __kthread_parkme+0x5c/0x5c [<ffffffff813b147c>] ret_from_fork+0x7c/0xb0 [<ffffffff810593fb>] ? __kthread_parkme+0x5c/0x5c Fixes: 5b8f15f78e6f ("net: cdc_mbim: handle IPv6 Neigbor Solicitations") Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: cdc_ncm: fix buffer overflowBjørn Mork2014-05-051-1/+1
| | | | | | | | | | | | | | | | | | | Commit 4d619f625a60 ("net: cdc_ncm: no point in filling up the NTBs if we send ZLPs") changed the padding logic for devices with the ZLP flag set. This meant that frames of any size will be sent without additional padding, except for the single byte added if the size is a multiple of the USB packet size. But if the unpadded size is identical to the maximum frame size, and the maximum size is a multiplum of the USB packet size, then this one-byte padding will overflow the buffer. Prevent padding if already at maximum frame size, letting usbnet transmit a ZLP instead in this case. Fixes: 4d619f625a60 ("net: cdc_ncm: no point in filling up the NTBs if we send ZLPs") Reported by: Yu-an Shih <yshih@nvidia.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qmi_wwan: add a number of Dell devicesBjørn Mork2014-04-271-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | Dan writes: "The Dell drivers use the same configuration for PIDs: 81A2: Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card 81A3: Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card 81A4: Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card 81A8: Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card 81A9: Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card These devices are all clearly Sierra devices, but are also definitely Gobi-based. The A8 might be the MC7700/7710 and A9 is likely a MC7750. >From DellGobi5kSetup.exe from the Dell drivers: usbif0: serial/firmware loader? usbif2: nmea usbif3: modem/ppp usbif8: net/QMI" Reported-by: AceLan Kao <acelan.kao@canonical.com> Reported-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qmi_wwan: add a number of CMOTech devicesBjørn Mork2014-04-271-0/+16
| | | | | | | | | A number of older CMOTech modems are based on Qualcomm chips and exporting a QMI/wwan function. Reported-by: Lars Melin <larsm17@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qmi_wwan: add Alcatel L800MABjørn Mork2014-04-271-0/+1
| | | | | | | | | | | Device interface layout: 0: ff/ff/ff - serial 1: ff/00/00 - serial AT+PPP 2: ff/ff/ff - QMI/wwan 3: 08/06/50 - storage Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qmi_wwan: add Olivetti Olicard 500Bjørn Mork2014-04-271-0/+1
| | | | | | | | | | | | | Device interface layout: 0: ff/ff/ff - serial 1: ff/ff/ff - serial AT+PPP 2: 08/06/50 - storage 3: ff/ff/ff - serial 4: ff/ff/ff - QMI/wwan Reported-by: Julio Araujo <julio.araujo@wllctel.com.br> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qmi_wwan: add Sierra Wireless MC7305/MC7355Bjørn Mork2014-04-271-0/+1
| | | | | Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qmi_wwan: add Sierra Wireless MC73xxBjørn Mork2014-04-271-0/+3
| | | | | Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qmi_wwan: add Sierra Wireless EM7355Bjørn Mork2014-04-271-0/+1
| | | | | Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8152: check RTL8152_UNPLUGhayeswang2014-04-121-0/+48
| | | | | | | | | | When the device is unplugged, the driver would try to disable the device. Add checking the flag of RTL8152_UNPLUG to skip setting the device when it is unplugged. This could shorten the time of unloading the driver. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qmi_wwan/cdc_ether: move Novatel E371 (1410:9011) to qmi_wwanYegor Yefremov2014-03-312-0/+14
| | | | | | | | | | | This device provides QMI and ethernet functionality via a standard CDC ethernet descriptor. But when driven by cdc_ether, the QMI functionality is unavailable because only cdc_ether can claim the USB interface. Thus blacklist the device in cdc_ether and add its IDs to qmi_wwan, which enables both QMI and ethernet simultaneously. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-03-291-14/+19
|\ | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/marvell/mvneta.c The mvneta.c conflict is a case of overlapping changes, a conversion to devm_ioremap_resource() vs. a conversion to netdev_alloc_pcpu_stats. Signed-off-by: David S. Miller <davem@davemloft.net>
| * usbnet: include wait queue head in device structureOliver Neukum2014-03-271-14/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a race which happens by freeing an object on the stack. Quoting Julius: > The issue is > that it calls usbnet_terminate_urbs() before that, which temporarily > installs a waitqueue in dev->wait in order to be able to wait on the > tasklet to run and finish up some queues. The waiting itself looks > okay, but the access to 'dev->wait' is totally unprotected and can > race arbitrarily. I think in this case usbnet_bh() managed to succeed > it's dev->wait check just before usbnet_terminate_urbs() sets it back > to NULL. The latter then finishes and the waitqueue_t structure on its > stack gets overwritten by other functions halfway through the > wake_up() call in usbnet_bh(). The fix is to just not allocate the data structure on the stack. As dev->wait is abused as a flag it also takes a runtime PM change to fix this bug. Signed-off-by: Oliver Neukum <oneukum@suse.de> Reported-by: Grant Grundler <grundler@google.com> Tested-by: Grant Grundler <grundler@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-03-251-25/+23
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | Conflicts: Documentation/devicetree/bindings/net/micrel-ks8851.txt net/core/netpoll.c The net/core/netpoll.c conflict is a bug fix in 'net' happening to code which is completely removed in 'net-next'. In micrel-ks8851.txt we simply have overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: cdc_ncm: fix control message orderingBjørn Mork2014-03-181-25/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a context modified revert of commit 6a9612e2cb22 ("net: cdc_ncm: remove ncm_parm field") which introduced a NCM specification violation, causing setup errors for some devices. These errors resulted in the device and host disagreeing about shared settings, with complete failure to communicate as the end result. The NCM specification require that many of the NCM specific control reuests are sent only while the NCM Data Interface is in alternate setting 0. Reverting the commit ensures that we follow this requirement. Fixes: 6a9612e2cb22 ("net: cdc_ncm: remove ncm_parm field") Reported-and-tested-by: Pasi Kärkkäinen <pasik@iki.fi> Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: cdc_ncm: respect operator preferred MTU reported by MBIMBen Chan2014-03-201-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to "Universal Serial Bus Communications Class Subclass Specification for Mobile Broadband Interface Model, Revision 1.0, Errata-1" published by USB-IF, the wMTU field of the MBIM extended functional descriptor indicates the operator preferred MTU for IP data streams. This patch modifies cdc_ncm_setup to ensure that the MTU value set on the usbnet device does not exceed the operator preferred MTU indicated by wMTU if the MBIM device exposes a MBIM extended functional descriptor. Signed-off-by: Ben Chan <benchan@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-03-145-260/+17
|\ \ | |/ | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/usb/r8152.c drivers/net/xen-netback/netback.c Both the r8152 and netback conflicts were simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2014-03-134-255/+17
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: "I know this is a bit more than you want to see, and I've told the wireless folks under no uncertain terms that they must severely scale back the extent of the fixes they are submitting this late in the game. Anyways: 1) vmxnet3's netpoll doesn't perform the equivalent of an ISR, which is the correct implementation, like it should. Instead it does something like a NAPI poll operation. This leads to crashes. From Neil Horman and Arnd Bergmann. 2) Segmentation of SKBs requires proper socket orphaning of the fragments, otherwise we might access stale state released by the release callbacks. This is a 5 patch fix, but the initial patches are giving variables and such significantly clearer names such that the actual fix itself at the end looks trivial. From Michael S. Tsirkin. 3) TCP control block release can deadlock if invoked from a timer on an already "owned" socket. Fix from Eric Dumazet. 4) In the bridge multicast code, we must validate that the destination address of general queries is the link local all-nodes multicast address. From Linus Lüssing. 5) The x86 BPF JIT support for negative offsets puts the parameter for the helper function call in the wrong register. Fix from Alexei Starovoitov. 6) The descriptor type used for RTL_GIGA_MAC_VER_17 chips in the r8169 driver is incorrect. Fix from Hayes Wang. 7) The xen-netback driver tests skb_shinfo(skb)->gso_type bits to see if a packet is a GSO frame, but that's not the correct test. It should use skb_is_gso(skb) instead. Fix from Wei Liu. 8) Negative msg->msg_namelen values should generate an error, from Matthew Leach. 9) at86rf230 can deadlock because it takes the same lock from it's ISR and it's hard_start_xmit method, without disabling interrupts in the latter. Fix from Alexander Aring. 10) The FEC driver's restart doesn't perform operations in the correct order, so promiscuous settings can get lost. Fix from Stefan Wahren. 11) Fix SKB leak in SCTP cookie handling, from Daniel Borkmann. 12) Reference count and memory leak fixes in TIPC from Ying Xue and Erik Hugne. 13) Forced eviction in inet_frag_evictor() must strictly make sure all frags are deleted, otherwise module unload (f.e. 6lowpan) can crash. Fix from Florian Westphal. 14) Remove assumptions in AF_UNIX's use of csum_partial() (which it uses as a hash function), which breaks on PowerPC. From Anton Blanchard. The main gist of the issue is that csum_partial() is defined only as a value that, once folded (f.e. via csum_fold()) produces a correct 16-bit checksum. It is legitimate, therefore, for csum_partial() to produce two different 32-bit values over the same data if their respective alignments are different. 15) Fix endiannes bug in MAC address handling of ibmveth driver, also from Anton Blanchard. 16) Error checks for ipv6 exthdrs offload registration are reversed, from Anton Nayshtut. 17) Externally triggered ipv6 addrconf routes should count against the garbage collection threshold. Fix from Sabrina Dubroca. 18) The PCI shutdown handler added to the bnx2 driver can wedge the chip if it was not brought up earlier already, which in particular causes the firmware to shut down the PHY. Fix from Michael Chan. 19) Adjust the sanity WARN_ON_ONCE() in qdisc_list_add() because as currently coded it can and does trigger in legitimate situations. From Eric Dumazet. 20) BNA driver fails to build on ARM because of a too large udelay() call, fix from Ben Hutchings. 21) Fair-Queue qdisc holds locks during GFP_KERNEL allocations, fix from Eric Dumazet. 22) The vlan passthrough ops added in the previous release causes a regression in source MAC address setting of outgoing headers in some circumstances. Fix from Peter Boström" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (70 commits) ipv6: Avoid unnecessary temporary addresses being generated eth: fec: Fix lost promiscuous mode after reconnecting cable bonding: set correct vlan id for alb xmit path at86rf230: fix lockdep splats net/mlx4_en: Deregister multicast vxlan steering rules when going down vmxnet3: fix building without CONFIG_PCI_MSI MAINTAINERS: add networking selftests to NETWORKING net: socket: error on a negative msg_namelen MAINTAINERS: Add tools/net to NETWORKING [GENERAL] packet: doc: Spelling s/than/that/ net/mlx4_core: Load the IB driver when the device supports IBoE net/mlx4_en: Handle vxlan steering rules for mac address changes net/mlx4_core: Fix wrong dump of the vxlan offloads device capability xen-netback: use skb_is_gso in xenvif_start_xmit r8169: fix the incorrect tx descriptor version tools/net/Makefile: Define PACKAGE to fix build problems x86: bpf_jit: support negative offsets bridge: multicast: enable snooping on general queries only bridge: multicast: add sanity check for general query destination tcp: tcp_release_cb() should release socket ownership ...
| | * r8152: disable the ECM modehayeswang2014-03-054-255/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are known issues for switching the drivers between ECM mode and vendor mode. The interrup transfer may become abnormal. The hardware may have the opportunity to die if you change the configuration without unloading the current driver first, because all the control transfers of the current driver would fail after the command of switching the configuration. Although to use the ecm driver and vendor driver independently is fine, it may have problems to change the driver from one to the other by switching the configuration. Additionally, now the vendor mode driver is more powerful than the ECM driver. Thus, disable the ECM mode driver, and let r8152 to set the configuration to vendor mode and reset the device automatically. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge tag 'usb-3.14-rc6' of ↵Linus Torvalds2014-03-091-8/+0
| |\ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are 4 USB fixes for your current tree. Two of them are reverts to hopefully resolve the nasty XHCI regressions we have been having on some types of devices. The other two are quirks for some Logitech video devices" * tag 'usb-3.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: Revert "USBNET: ax88179_178a: enable tso if usb host supports sg dma" Revert "xhci 1.0: Limit arbitrarily-aligned scatter gather." usb: Make DELAY_INIT quirk wait 100ms between Get Configuration requests usb: Add device quirk for Logitech HD Pro Webcams C920 and C930e
| | * Revert "USBNET: ax88179_178a: enable tso if usb host supports sg dma"Mathias Nyman2014-03-071-8/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 3804fad45411b48233b48003e33a78f290d227c8. This commit, together with commit 247bf557273dd775505fb9240d2d152f4f20d304 "xhci 1.0: Limit arbitrarily-aligned scatter gather." were origially added to get xHCI 1.0 hosts and usb ethernet ax88179_178a devices working together with scatter gather. xHCI 1.0 hosts pose some requirement on how transfer buffers are aligned, setting this requirement for 1.0 hosts caused USB 3.0 mass storage devices to fail more frequently. USB 3.0 mass storage devices used to work before 3.14-rc1. Theoretically, the TD fragment rules could have caused an occasional disk glitch. Now the devices *will* fail, instead of theoretically failing. >From a user perspective, this looks like a regression; the USB device obviously fails on 3.14-rc1, and may sometimes silently fail on prior kernels. The proper soluition is to implement the TD fragment rules for xHCI 1.0 hosts, but for now, revert this patch until scatter gather can be properly supported. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | lg-vl600: Convert uses of __constant_<foo> to <foo>Joe Perches2014-03-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The use of __constant_<foo> has been unnecessary for quite awhile now. Make these uses consistent with the rest of the kernel. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | r8152: support dumping the hw countershayeswang2014-03-121-2/+93
| | | | | | | | | | | | | | | | | | | | | Add dumping the tally counter by ethtool. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | r8152: add skb_cow_headhayeswang2014-03-101-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | Call skb_cow_head() before editing the tx packet header. The header would be reallocated if it is shared. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | r8152: support IPv6hayeswang2014-03-071-3/+103
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support hw IPv6 checksum for TCP and UDP packets. Note that the hw has the limitation of the range of the transport offset. Besides, the TCP Pseudo Header of the IPv6 TSO of the hw bases on the Microsoft document which excludes the packet length. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | r8152: support TSOhayeswang2014-03-071-30/+87
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support scatter gather and TSO. Adjust the tx checksum function and set the max gso size to fix the size of the tx aggregation buffer. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | r8152: support rx checksumhayeswang2014-03-071-2/+39
| | | | | | | | | | | | | | | | | | | | | Support hw rx checksum for TCP and UDP packets. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | r8152: calculate the dropped packets for rxhayeswang2014-03-071-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | Continue dealing with the remain rx packets, even though the allocation of the skb fail. This could calculate the correct dropped packets. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | r8152: up the priority of the transmissionhayeswang2014-03-071-18/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | move the tx_bottom() from delayed_work to tasklet. It makes the rx and tx balanced. If the device is in runtime suspend when getting the tx packet, wakeup the device before trasmitting. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | r8152: check tx agg list before spin lockhayeswang2014-03-071-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | Check tx agg list before spin lock to avoid doing spin lock every times. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | r8152: replace spin_lock_irqsave and spin_unlock_irqrestorehayeswang2014-03-071-16/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use spin_lock and spin_unlock in interrupt context. The ndo_start_xmit would not be called in interrupt context, so replace the relative spin_lock_irqsave and spin_unlock_irqrestore with spin_lock_bh and spin_unlock_bh. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | r8152: remove rtl8152_get_statshayeswang2014-03-061-15/+6
| | | | | | | | | | | | | | | | | | | | | | | | The rtl8152_get_stats() returns the point address of the struct net_device_stats. This could be got from struct net_device directly. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | r8152: replace tp->netdev with netdevhayeswang2014-03-061-3/+5
| | | | | | | | | | | | | | | | | | | | | Replace some tp->netdev with netdev. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | r8152: deal with the empty line and spacehayeswang2014-03-061-3/+6
| | | | | | | | | | | | | | | | | | | | | Add or remove some empty lines. Replace the spaces with the tabs. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-03-051-0/+34
|\ \ \ | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/wireless/ath/ath9k/recv.c drivers/net/wireless/mwifiex/pcie.c net/ipv6/sit.c The SIT driver conflict consists of a bug fix being done by hand in 'net' (missing u64_stats_init()) whilst in 'net-next' a helper was created (netdev_alloc_pcpu_stats()) which takes care of this. The two wireless conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | USB AX88179/178A: Support D-Link DUB-1312Gerry Demaret2014-03-021-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | Add the USB device ID for the D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter to the AX88179/178A driver. Signed-off-by: Gerry Demaret <gerry@tigron.be> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | AX88179_178A: Add VID:DID for Lenovo OneLinkDock Gigabit LANFreddy Xin2014-02-261-0/+17
| |/ | | | | | | | | | | | | Add VID:DID for Lenovo OneLinkDock Gigabit LAN Signed-off-by: Freddy Xin <freddy@asix.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-02-1912-24/+49
|\ \ | |/ | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/bonding/bond_3ad.h drivers/net/bonding/bond_main.c Two minor conflicts in bonding, both of which were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * usbnet: remove generic hard_header_len checkEmil Goode2014-02-1710-21/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes a generic hard_header_len check from the usbnet module that is causing dropped packages under certain circumstances for devices that send rx packets that cross urb boundaries. One example is the AX88772B which occasionally send rx packets that cross urb boundaries where the remaining partial packet is sent with no hardware header. When the buffer with a partial packet is of less number of octets than the value of hard_header_len the buffer is discarded by the usbnet module. With AX88772B this can be reproduced by using ping with a packet size between 1965-1976. The bug has been reported here: https://bugzilla.kernel.org/show_bug.cgi?id=29082 This patch introduces the following changes: - Removes the generic hard_header_len check in the rx_complete function in the usbnet module. - Introduces a ETH_HLEN check for skbs that are not cloned from within a rx_fixup callback. - For safety a hard_header_len check is added to each rx_fixup callback function that could be affected by this change. These extra checks could possibly be removed by someone who has the hardware to test. - Removes a call to dev_kfree_skb_any() and instead utilizes the dev->done list to queue skbs for cleanup. The changes place full responsibility on the rx_fixup callback functions that clone skbs to only pass valid skbs to the usbnet_skb_return function. Signed-off-by: Emil Goode <emilgoode@gmail.com> Reported-by: Igor Gnatenko <i.gnatenko.brain@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: asix: add missing flag to struct driver_infoEmil Goode2014-02-141-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | The struct driver_info ax88178_info is assigned the function asix_rx_fixup_common as it's rx_fixup callback. This means that FLAG_MULTI_PACKET must be set as this function is cloning the data and calling usbnet_skb_return. Not setting this flag leads to usbnet_skb_return beeing called a second time from within the rx_process function in the usbnet module. Signed-off-by: Emil Goode <emilgoode@gmail.com> Reported-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
| * USB2NET: Fix Default to 'y' for SR9800 Device Driver, setting to 'n'Liu Junliang2014-02-131-1/+0
| | | | | | | | | | Signed-off-by: Liu Junliang <liujunliang_ljl@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * USB2NET: SR9800: use %zu for size_tJingoo Han2014-02-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Use %zu for size_t in order to avoid the following build warning in printks. drivers/net/usb/sr9800.c: In function 'sr9800_bind' drivers/net/usb/sr9800.c:826:2: warning: format '%ld' expects argument of type 'long int' but argument 5 has type 'size_t' [-Wformat] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: qmi_wwan: add support for Cinterion PXS8 and PHS8Aleksander Morgado2014-02-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | When the PXS8 and PHS8 devices show up with PID 0x0053 they will expose both a QMI port and a WWAN interface. CC: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com> CC: Christian Schmiedl <christian.schmiedl@gemalto.com> CC: Nicolaus Colberg <nicolaus.colberg@gemalto.com> CC: David McCullough <david.mccullough@accelecon.com> Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8152: support get_msglevel and set_msglevelhayeswang2014-02-181-0/+16
| | | | | | | | | | | | | | Support get_msglevel and set_msglevel. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8152: set disable_hub_initiated_lpmhayeswang2014-02-181-0/+1
| | | | | | | | | | | | | | Set disable_hub_initiated_lpm = 1. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud