summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/mtd_blkdevs.c
Commit message (Collapse)AuthorAgeFilesLines
* block_device_operations->release() should return voidAl Viro2013-05-071-3/+2
| | | | | | | | | The value passed is 0 in all but "it can never happen" cases (and those only in a couple of drivers) *and* it would've been lost on the way out anyway, even if something tried to pass something meaningful. Just don't bother. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* mtd_blktrans_ops->release() should return voidAl Viro2013-05-051-4/+4
| | | | | | | Both existing instances always return 0 and even if they didn't, the value would be lost on the way out. Just don't bother... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* mtd: mtd_blkdevs: Replace request handler kthread with a workqueueEzequiel Garcia2012-11-211-32/+15
| | | | | | | | | | | | | | | | | | | By replacing a kthread with a workqueue, the code is now a bit clearer. There's also a slight reduction of code size (numbers apply for x86): Before: text data bss dec hex filename 3248 36 0 3284 cd4 drivers/mtd/mtd_blkdevs.o After: text data bss dec hex filename 3150 36 0 3186 c72 drivers/mtd/mtd_blkdevs.o Due to lack of real hardware, tests have been performed on an emulated environment with mtdswap and mtdblock over nandsim devices. Some real testing should be done, before merging this patch. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: mtd_blkdev: Use a different name for block_device_operations variableEzequiel Garcia2012-11-211-2/+2
| | | | | | | | | struct mtd_blktrans_ops is a type, and mtd_blktrans_ops is a variable. To improve code clarity it's better to not use the same names, so we just change the latter. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: mtdblock: call mtd_sync() only if opened for writeAlexander Stein2012-03-271-0/+1
| | | | | | | | | | | | | | Because it is useless to call it if the device is opened in R/O mode, and also harmful: on CFI NOR flash it may block for long time waiting for erase operations to complete is another partition with a R/W file-system on this chip. Artem Bityutskiy: write commit message, amend the patch to match the latest tree (we use mtd_sync(), not mtd->sync() nowadays). Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: mtd_blkdevs: don't increase 'open' count on error pathBrian Norris2012-01-091-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some error paths in mtd_blkdevs were fixed in the following commit: commit 94735ec4044a6d318b83ad3c5794e931ed168d10 mtd: mtd_blkdevs: fix error path in blktrans_open But on these error paths, the block device's `dev->open' count is already incremented before we check for errors. This meant that, while the error path was handled correctly on the first time through blktrans_open(), the device is erroneously considered already open on the second time through. This problem can be seen, for instance, when a UBI volume is simultaneously mounted as a UBIFS partition and read through its corresponding gluebi mtdblockX device. This results in blktrans_open() passing its error checks (with `dev->open > 0') without actually having a handle on the device. Here's a summarized log of the actions and results with nandsim: # modprobe nandsim # modprobe mtdblock # modprobe gluebi # modprobe ubifs # ubiattach /dev/ubi_ctrl -m 0 ... # ubimkvol /dev/ubi0 -N test -s 16MiB ... # mount -t ubifs ubi0:test /mnt # ls /dev/mtdblock* /dev/mtdblock0 /dev/mtdblock1 # cat /dev/mtdblock1 > /dev/null cat: can't open '/dev/mtdblock4': Device or resource busy # cat /dev/mtdblock1 > /dev/null CPU 0 Unable to handle kernel paging request at virtual address fffffff0, epc == 8031536c, ra == 8031f280 Oops[#1]: ... Call Trace: [<8031536c>] ubi_leb_read+0x14/0x164 [<8031f280>] gluebi_read+0xf0/0x148 [<802edba8>] mtdblock_readsect+0x64/0x198 [<802ecfe4>] mtd_blktrans_thread+0x330/0x3f4 [<8005be98>] kthread+0x88/0x90 [<8000bc04>] kernel_thread_helper+0x10/0x18 Cc: stable@kernel.org [3.0+] Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: mark block device queue as non-rotationalDan McGee2011-10-141-0/+2
| | | | | | | This is similar to what the nbd driver does, among others. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
* mtd: mtd_blkdevs: fix error path in blktrans_openArtem Bityutskiy2011-05-251-3/+21
| | | | | | | | | | | | | | | | | | The 'blktrans_open()' does not handle possible '__get_mtd_device()' failures because it does not check the error code. Moreover, the 'dev->tr->open()' failures are not handled correctly because in this case the function just goes ahead and gets the mtd device, then returns an error. But Instead, it should _not_ try to get the mtd device, then it should put back the module and the kref. This patch fixes the issue. Note, I only compile-tested it. This patch was inspired by a bug report about a similar issue in 2.6.34 kernels sent by Mike Turner <admin@islandsoftware.co.uk> to the MTD mailing list: http://lists.infradead.org/pipermail/linux-mtd/2011-April/034980.html Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* Merge branch 'master' of ↵Artem Bityutskiy2011-03-251-3/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-linus-1 * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6: (9356 commits) [media] rc: update for bitop name changes fs: simplify iget & friends fs: pull inode->i_lock up out of writeback_single_inode fs: rename inode_lock to inode_hash_lock fs: move i_wb_list out from under inode_lock fs: move i_sb_list out from under inode_lock fs: remove inode_lock from iput_final and prune_icache fs: Lock the inode LRU list separately fs: factor inode disposal fs: protect inode->i_state with inode->i_lock lib, arch: add filter argument to show_mem and fix private implementations SLUB: Write to per cpu data when allocating it slub: Fix debugobjects with lockless fastpath autofs4: Do not potentially dereference NULL pointer returned by fget() in autofs_dev_ioctl_setpipefd() autofs4 - remove autofs4_lock autofs4 - fix d_manage() return on rcu-walk autofs4 - fix autofs4_expire_indirect() traversal autofs4 - fix dentry leak in autofs4_expire_direct() autofs4 - reinstate last used update on access vfs - check non-mountpoint dentry might block in __follow_mount_rcu() ... NOTE! This merge commit was created to fix compilation error. The block tree was merged upstream and removed the 'elv_queue_empty()' function which the new 'mtdswap' driver is using. So a simple merge of the mtd tree with upstream does not compile. And the mtd tree has already be published, so re-basing it is not an option. To fix this unfortunate situation, I had to merge upstream into the mtd-2.6.git tree without committing, put the fixup patch on top of this, and then commit this. The result is that we do not have commits which do not compile. In other words, this merge commit "merges" 3 things: the MTD tree, the upstream tree, and the fixup patch.
* | mtd_blkdevs: Set the maximum discards sizeJarkko Lavinen2011-03-111-3/+4
| | | | | | | | | | | | | | | | Set max_discard_sectors to UINT_MAX. Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com> Tested-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | mtd_blkdevs: Add background processing supportJarkko Lavinen2011-03-111-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new background method into mtd_blktrans_ops, add background support into mtd_blktrans_thread(), and add mtd_blktrans_cease_background(). If the mtd blktrans dev has the background support, the thread will call background function when the request queue becomes empty. The background operation may run as long as needs to until mtd_blktrans_cease_background() tells to stop. Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com> Tested-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | mtd: mtd_blkdevs: local symbols should be staticH Hartley Sweeten2011-03-111-2/+2
|/ | | | | | | | | The function blktrans_dev_release and blktrans_dev_put are only used locally in this file and should be static. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: mtd_blkdevs: fix double free on error pathMaxim Levitsky2011-03-111-1/+0
| | | | | | | | | | | | | | | | This one liner patch fixes double free that will occur if add_mtd_blktrans_dev fails. On failure it frees the input argument, but all its users also free it on error which is natural thing to do. Thus don't free it. All credit for finding that bug belongs to reporters of the bug in the android bugzilla http://code.google.com/p/android/issues/detail?id=13761 Commit message tweaked by Artem. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@kernel.org
* mtd: Remove redundant mutex from mtd_blkdevs.cDavid Woodhouse2010-10-301-7/+0
| | | | | | | | | | | In commit 2a48fc0ab24241755dc93bfd4f01d68efab47f5a ('block: autoconvert trivial BKL users to private mutex'), Arnd replaced the BKL usage with a mutex. However, Maxim has already provided a better fix in commit 480792b7bf188c29b8d4b10fee65c3a06ec5dbf7 ('mtd: blktrans: kill BKL'), which was simply to remove the BKL without replacing it — since he'd already made it do all necessary locking for itself. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* Merge branch 'master' of ↵David Woodhouse2010-10-301-1/+7
|\ | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git Conflicts: drivers/mtd/mtd_blkdevs.c Merge Grant's device-tree bits so that we can apply the subsequent fixes. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * block: autoconvert trivial BKL users to private mutexArnd Bergmann2010-10-051-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The block device drivers have all gained new lock_kernel calls from a recent pushdown, and some of the drivers were already using the BKL before. This turns the BKL into a set of per-driver mutexes. Still need to check whether this is safe to do. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* | MTD: Fix wrong check register_blkdev return valueFrank Li2010-10-301-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | register_blkdev return 1..255 when major = 0. if (ret ) { printk(KERN_WARNING "Unable to register %s block device on major %d: %d\n", tr->name, tr->major, ret); mutex_unlock(&mtd_table_mutex); return ret; } Above code will return fail when register_blkdev return allocated major number. Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | mtd: blktrans: fix a race vs kthread_stopMaxim Levitsky2010-10-251-0/+4
| | | | | | | | | | | | | | | | | | There is small race window that could make kthread_stop hang forever. I found that while hacking the IR subsystem. Signed-off-by: Maxim Levitsky <maximlevisky@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | mtd: blktrans: kill BKLMaxim Levitsky2010-10-251-6/+0
| | | | | | | | | | | | | | | | | | It not needed, because I already added locking for all fops methods. Signed-off-by: Maxim Levitsky <maximlevisky@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | mtd: allow to unload the mtdtrans module if its block devices aren't openMaxim Levitsky2010-10-251-28/+24
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now it once again possible to remove mtdtrans module. You still need to ensure that block devices of that module aren't mounted. This is due to the fact that as long as a block device is open, it still exists, therefore if we were to allow module removal, this block device might became used again. This time in addition to code review, I also made the code pass some torture tests like module reload in a loop + read in a loop + card insert/removal all at same time. The blktrans_open/blktrans_release don't take the mtd table lock because: While device is added (that includes execution of add_mtd_blktrans_dev) the lock is already taken Now suppose the device will never be removed. In this case even if we have changes in mtd table, the entry that we need will stay exactly the same. (Note that we don't look at table at all, just following private pointer of block device). Now suppose that someone tries to remove the mtd device. This will be propagated to trans driver which _ought_ to call del_mtd_blktrans_dev which will take the per device lock, release the mtd device and set trans->mtd = NULL. >From this point on, following opens won't even be able to know anything about that mtd device (which at that point is likely not to exist) Also the same care is taken not to trip over NULL mtd pointer in blktrans_dev_release. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Tested-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* Merge branch 'for-2.6.36' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2010-08-101-4/+11
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits) block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n xen-blkfront: fix missing out label blkdev: fix blkdev_issue_zeroout return value block: update request stacking methods to support discards block: fix missing export of blk_types.h writeback: fix bad _bh spinlock nesting drbd: revert "delay probes", feature is being re-implemented differently drbd: Initialize all members of sync_conf to their defaults [Bugz 315] drbd: Disable delay probes for the upcomming release writeback: cleanup bdi_register writeback: add new tracepoints writeback: remove unnecessary init_timer call writeback: optimize periodic bdi thread wakeups writeback: prevent unnecessary bdi threads wakeups writeback: move bdi threads exiting logic to the forker thread writeback: restructure bdi forker loop a little writeback: move last_active to bdi writeback: do not remove bdi from bdi_list writeback: simplify bdi code a little writeback: do not lose wake-ups in bdi threads ... Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and drivers/scsi/scsi_error.c as per Jens.
| * block: push down BKL into .open and .releaseArnd Bergmann2010-08-071-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The open and release block_device_operations are currently called with the BKL held. In order to change that, we must first make sure that all drivers that currently rely on this have no regressions. This blindly pushes the BKL into all .open and .release operations for all block drivers to prepare for the next step. The drivers can subsequently replace the BKL with their own locks or remove it completely when it can be shown that it is not needed. The functions blkdev_get and blkdev_put are the only remaining users of the big kernel lock in the block layer, besides a few uses in the ioctl code, none of which need to serialize with blkdev_{get,put}. Most of these two functions is also under the protection of bdev->bd_mutex, including the actual calls to ->open and ->release, and the common code does not access any global data structures that need the BKL. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
| * block: push down BKL into .locked_ioctlArnd Bergmann2010-08-071-1/+4
| | | | | | | | | | | | | | | | | | | | | | As a preparation for the removal of the big kernel lock in the block layer, this removes the BKL from the common ioctl handling code, moving it into every single driver still using it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
| * block: remove wrappers for request type/flagsChristoph Hellwig2010-08-071-2/+2
| | | | | | | | | | | | | | | | | | Remove all the trivial wrappers for the cmd_type and cmd_flags fields in struct requests. This allows much easier grepping for different request types instead of unwinding through macros. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* | mtd: Update copyright noticesDavid Woodhouse2010-08-081-2/+16
| | | | | | | | Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | mtd: blkdevs: fix crash related to sysfs attributes.Maxim Levitsky2010-08-061-3/+4
| | | | | | | | | | | | | | | | Remove the attributes group before disk to avoid use after free Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | mtd: return success on blktrans_ioctlDan Carpenter2010-08-021-0/+1
|/ | | | | | | | | There was a break missing so we returned -ENOTTY on success instead of zero. This was introduced by 048d8719956: "mtd: blktrans: Hotplug fixes" Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: blktrans: do blk_cleanup_queue when it is really safe to do soMaxim Levitsky2010-03-081-1/+1
| | | | | | | | | I was calling it in del_mtd_blktrans_dev, but ->request_fn could still be running at that point, thus defer this call to blktrans_dev_release Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: Few follow up cleanups for Smartmedia/xD supportMaxim Levitsky2010-02-261-2/+4
| | | | | | | | | | * Test results of few functions that were declared with __must_check * Fix bogus gcc warning about uinitialized variable 'ret' * Remove unused variable from mtdblock_remove_dev * Don't use deprecated DMA_32BIT_MASK Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: blktrans: allow FTL drivers to export sysfs attributesMaxim Levitsky2010-02-261-0/+8
| | | | | | | | | | | This patch adds an ability to export sysfs attributes below the block disk device. This can be used to pass the udev an information about the FTL and could include the vendor, serial, version, etc... Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: blktrans: Hotplug fixesMaxim Levitsky2010-02-261-54/+148
| | | | | | | | | | | | | | | | | | | * Add locking where it was missing. * Don't do a get_mtd_device in blktrans_open because it would lead to a deadlock; instead do that in add_mtd_blktrans_dev. * Only free the mtd_blktrans_dev structure when the last user exits. * Flush request queue on device removal. * Track users, and call tr->release in del_mtd_blktrans_dev Due to that ->open and release aren't called more that once. Now it is safe to call del_mtd_blktrans_dev while the device is still in use. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: blktrans: remove mtd_blkcore_priv, switch to per device queue and threadMaxim Levitsky2010-02-261-66/+58
| | | | | | | | | This is the biggest change. To make hotplug possible, and this layer clean, the mtd_blktrans_dev now contains everything for a single mtd block translation device. Also removed some very old leftovers. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: Raise limit on block device minor numbersBen Hutchings2010-02-251-2/+5
| | | | | | | | | | | add_mtd_blktrans_dev() imposes a maximum of 257 devices per block translator. This was presumably meant to prevent overflow back in the days of 8-bit minor numbers. Instead, check against MINORMASK and the limits of the partition naming scheme. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: Introduce and use iteration macro for reading the MTD device tableBen Hutchings2010-02-251-5/+5
| | | | | | Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* Merge git://git.infradead.org/mtd-2.6Linus Torvalds2009-12-161-4/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/mtd-2.6: (90 commits) jffs2: Fix long-standing bug with symlink garbage collection. mtd: OneNAND: Fix test of unsigned in onenand_otp_walk() mtd: cfi_cmdset_0002, fix lock imbalance Revert "mtd: move mxcnd_remove to .exit.text" mtd: m25p80: add support for Macronix MX25L4005A kmsg_dump: fix build for CONFIG_PRINTK=n mtd: nandsim: add support for 4KiB pages mtd: mtdoops: refactor as a kmsg_dumper mtd: mtdoops: make record size configurable mtd: mtdoops: limit the maximum mtd partition size mtd: mtdoops: keep track of used/unused pages in an array mtd: mtdoops: several minor cleanups core: Add kernel message dumper to call on oopses and panics mtd: add ARM pismo support mtd: pxa3xx_nand: Fix PIO data transfer mtd: nand: fix multi-chip suspend problem mtd: add support for switching old SST chips into QRY mode mtd: fix M29W800D dev_id and uaddr mtd: don't use PF_MEMALLOC mtd: Add bad block table overrides to Davinci NAND driver ... Fixed up conflicts (mostly trivial) in drivers/mtd/devices/m25p80.c drivers/mtd/maps/pcmciamtd.c drivers/mtd/nand/pxa3xx_nand.c kernel/printk.c
| * mtd: don't use PF_MEMALLOCKOSAKI Motohiro2009-11-301-3/+0
| | | | | | | | | | | | | | | | | | Non MM subsystem must not use PF_MEMALLOC. Memory reclaim need few memory, anyone must not prevent it. Otherwise the system cause mysterious hang-up and/or OOM Killer invokation. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd_blkdevs.c: quiet a "symbol shadows" sparse warninghartleys2009-10-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | In register_mtd_blktrans(), the symbol 'ret' is already declared as an int at the start of the function. The inner loop declaration is unnecessary. Quiets the following sparse warning: warning: symbol 'ret' shadows an earlier one Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | block: add helpers to run flush_dcache_page() against a bio and a request's ↵Ilya Loginov2009-11-261-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pages Mtdblock driver doesn't call flush_dcache_page for pages in request. So, this causes problems on architectures where the icache doesn't fill from the dcache or with dcache aliases. The patch fixes this. The ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE symbol was introduced to avoid pointless empty cache-thrashing loops on architectures for which flush_dcache_page() is a no-op. Every architecture was provided with this flush pages on architectires where ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE is equal 1 or do nothing otherwise. See "fix mtd_blkdevs problem with caches on some architectures" discussion on LKML for more information. Signed-off-by: Ilya Loginov <isloginov@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Peter Horton <phorton@bitbox.co.uk> Cc: "Ed L. Cashin" <ecashin@coraid.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* | block: use normal I/O path for discard requestsChristoph Hellwig2009-10-011-14/+5
|/ | | | | | | | | | | | | | | | | | | | | | | prepare_discard_fn() was being called in a place where memory allocation was effectively impossible. This makes it inappropriate for all but the most trivial translations of Linux's DISCARD operation to the block command set. Additionally adding a payload there makes the ownership of the bio backing unclear as it's now allocated by the device driver and not the submitter as usual. It is replaced with QUEUE_FLAG_DISCARD which is used to indicate whether the queue supports discard operations or not. blkdev_issue_discard now allocates a one-page, sector-length payload which is the right thing for the common ATA and SCSI implementations. The mtd implementation of prepare_discard_fn() is replaced with simply checking for the request being a discard. Largely based on a previous patch from Matthew Wilcox <matthew@wil.cx> which did the prepare_discard_fn but not the different payload allocation yet. Signed-off-by: Christoph Hellwig <hch@lst.de>
* const: make block_device_operations constAlexey Dobriyan2009-09-221-1/+1
| | | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mtd: blkdevs: do not forget to get MTD devicesArtem Bityutskiy2009-08-031-3/+3
| | | | | | | | | | | | | | | | | Nowadays MTD devices have to be "get" before they can be used. This has to be done with 'get_mtd_device()'. The 'blktrans_open()' function did not do this and instead used 'try_module_get()'. Fix this. Since 'get_mtd_device()' already gets the module, extra 'try_module_get()' is not needed. This fixes oops when one tries to use mtdblock on top of gluebi. Reported-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* Merge git://git.infradead.org/mtd-2.6Linus Torvalds2009-06-221-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/mtd-2.6: (63 commits) mtd: OneNAND: Allow setting of boundary information when built as module jffs2: leaking jffs2_summary in function jffs2_scan_medium mtd: nand: Fix memory leak on txx9ndfmc probe failure. mtd: orion_nand: use burst reads with double word accesses mtd/nand: s3c6400 support for s3c2410 driver [MTD] [NAND] S3C2410: Use DIV_ROUND_UP [MTD] [NAND] S3C2410: Deal with unaligned lengths in S3C2440 buffer read/write [MTD] [NAND] S3C2410: Allow the machine code to get the BBT table from NAND [MTD] [NAND] S3C2410: Added a kerneldoc for s3c2410_nand_set mtd: physmap_of: Add multiple regions and concatenation support mtd: nand: max_retries off by one in mxc_nand mtd: nand: s3c2410_nand_setrate(): use correct macros for 2412/2440 mtd: onenand: add bbt_wait & unlock_all as replaceable for some platform mtd: Flex-OneNAND support mtd: nand: add OMAP2/OMAP3 NAND driver mtd: maps: Blackfin async: fix memory leaks in probe/remove funcs mtd: uclinux: mark local stuff static mtd: uclinux: do not allow to be built as a module mtd: uclinux: allow systems to override map addr/size mtd: blackfin NFC: fix hang when using NAND on BF527-EZKITs ...
| * [MTD] set blkdev parent to the mtd device, not its parentDavid Woodhouse2009-05-261-1/+1
| | | | | | | | Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | block: Do away with the notion of hardsect_sizeMartin K. Petersen2009-05-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Until now we have had a 1:1 mapping between storage device physical block size and the logical block sized used when addressing the device. With SATA 4KB drives coming out that will no longer be the case. The sector size will be 4KB but the logical block size will remain 512-bytes. Hence we need to distinguish between the physical block size and the logical ditto. This patch renames hardsect_size to logical_block_size. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* | block: implement and enforce request peek/start/fetchTejun Heo2009-05-111-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Till now block layer allowed two separate modes of request execution. A request is always acquired from the request queue via elv_next_request(). After that, drivers are free to either dequeue it or process it without dequeueing. Dequeue allows elv_next_request() to return the next request so that multiple requests can be in flight. Executing requests without dequeueing has its merits mostly in allowing drivers for simpler devices which can't do sg to deal with segments only without considering request boundary. However, the benefit this brings is dubious and declining while the cost of the API ambiguity is increasing. Segment based drivers are usually for very old or limited devices and as converting to dequeueing model isn't difficult, it doesn't justify the API overhead it puts on block layer and its more modern users. Previous patches converted all block low level drivers to dequeueing model. This patch completes the API transition by... * renaming elv_next_request() to blk_peek_request() * renaming blkdev_dequeue_request() to blk_start_request() * adding blk_fetch_request() which is combination of peek and start * disallowing completion of queued (not started) requests * applying new API to all LLDs Renamings are for consistency and to break out of tree code so that it's apparent that out of tree drivers need updating. [ Impact: block request issue API cleanup, no functional change ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Mike Miller <mike.miller@hp.com> Cc: unsik Kim <donari75@gmail.com> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: David S. Miller <davem@davemloft.net> Cc: Laurent Vivier <Laurent@lvivier.info> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: Pierre Ossman <drzeus@drzeus.cx> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Cc: Stefan Weinhuber <wein@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* | mtd_blkdevs: dequeue in-flight requestTejun Heo2009-05-111-4/+13
| | | | | | | | | | | | | | | | | | | | | | mtd_blkdevs processes requests one-by-one synchronously from a kthread and can be easily converted to dequeueing model. Convert it. [ Impact: dequeue in-flight request ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* | block: blk_rq_[cur_]_{sectors|bytes}() usage cleanupTejun Heo2009-05-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the previous changes, the followings are now guaranteed for all requests in any valid state. * blk_rq_sectors() == blk_rq_bytes() >> 9 * blk_rq_cur_sectors() == blk_rq_cur_bytes() >> 9 Clean up accessor usages. Notable changes are * nbd,i2o_block: end_all used instead of explicit byte count * scsi_lib: unnecessary conditional on request type removed [ Impact: cleanup ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* | block: convert to pos and nr_sectors accessorsTejun Heo2009-05-111-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* | block: replace end_request() with [__]blk_end_request_cur()Tejun Heo2009-04-281-11/+11
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | end_request() has been kept around for backward compatibility; however, it's about time for it to go away. * There aren't too many users left. * Its use of @updtodate is pretty confusing. * In some cases, newer code ends up using mixture of end_request() and [__]blk_end_request[_all](), which is way too confusing. So, add [__]blk_end_request_cur() and replace end_request() with it. Most conversions are straightforward. Noteworthy ones are... * paride/pcd: next_request() updated to take 0/-errno instead of 1/0. * paride/pf: pf_end_request() and next_request() updated to take 0/-errno instead of 1/0. * xd: xd_readwrite() updated to return 0/-errno instead of 1/0. * mtd/mtd_blkdevs: blktrans_discard_request() updated to return 0/-errno instead of 1/0. Unnecessary local variable res initialization removed from mtd_blktrans_thread(). [ Impact: cleanup ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Joerg Dorchain <joerg@dorchain.net> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Laurent Vivier <Laurent@lvivier.info> Cc: Tim Waugh <tim@cyberelk.net> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: unsik Kim <donari75@gmail.com>
* [MTD] driver model updatesDavid Brownell2009-04-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Update driver model support in the MTD framework, so it fits better into the current udev-based hotplug framework: - Each mtd_info now has a device node. MTD drivers should set the dev.parent field to point to the physical device, before setting up partitions or otherwise declaring MTDs. - Those device nodes always map to /sys/class/mtdX device nodes, which no longer depend on MTD_CHARDEV. - Those mtdX sysfs nodes have a "starter set" of attributes; it's not yet sufficient to replace /proc/mtd. - Enabling MTD_CHARDEV provides /sys/class/mtdXro/ nodes and the /sys/class/mtd*/dev attributes (for udev, mdev, etc). - Include a MODULE_ALIAS_CHARDEV_MAJOR macro. It'll work with udev creating the /dev/mtd* nodes, not just a static rootfs. So the sysfs structure is pretty much what you'd expect, except that readonly chardev nodes are a bit quirky. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
OpenPOWER on IntegriCloud