summaryrefslogtreecommitdiffstats
path: root/drivers/leds/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* leds: add Panasonic AN30259A supportSimon Shields2018-09-101-0/+1
| | | | | | | | | | | | | | AN30259A is a 3-channel LED driver which uses I2C. It supports timed operation via an internal PWM clock, and variable brightness. This driver offers support for basic hardware-based blinking and brightness control. The datasheet is freely available: https://www.alliedelec.com/m/d/a9d2b3ee87c2d1a535a41dd747b1c247.pdf Signed-off-by: Simon Shields <simon@lineageos.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: lm3601x: Introduce the lm3601x LED driverDan Murphy2018-05-231-0/+1
| | | | | | | | | | | | | | | | | | | Introduce the family of LED devices that can drive a torch, strobe or IR LED. The LED driver can be configured with a strobe timer to execute a strobe flash. The IR LED brightness is controlled via the torch brightness register. The data sheet for each the LM36010 and LM36011 LED drivers can be found here: http://www.ti.com/product/LM36010 http://www.ti.com/product/LM36011 Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: Add Spreadtrum SC27xx breathing light controller driverBaolin Wang2018-05-141-0/+1
| | | | | | | | | | | This patch adds Spreadtrum SC27xx PMIC series breathing light controller driver, which can support 3 LEDs. Each LED can work at normal PWM mode and breathing mode. Signed-off-by: Xiaotong Lu <xiaotong.lu@spreadtrum.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: add LED driver for CR0014114 boardOleh Kravchenko2018-04-161-0/+1
| | | | | | | | | This patch adds a LED class driver for the RGB LEDs found on the Crane Merchandising System CR0014114 LEDs board. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: add driver for support Mellanox regmap LEDs for BMC and x86 platformVadim Pasternak2018-02-191-0/+1
| | | | | | | | | | | | | | | | | | | | Driver obtains LED devices according to system configuration and creates devices in form: "devicename:color:function", like The full path is to be: /sys/class/leds/mlxreg\:status\:amber/brightness After timer trigger activation: echo timer > /sys/class/leds/mlxreg\:status\:amber/trigger Attributes for LED blinking will appaer in sysfs infrastructure: /sys/class/leds/mlxreg\:status\:amber/delay_off /sys/class/leds/mlxreg\:status\:amber/delay_on LED setting is controlled through the on-board programmable devices, which exports its register map. This device could be attached to any bus type, for which register mapping is supported. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: lm3692x: Introduce LM3692x dual string driverDan Murphy2018-01-081-0/+1
| | | | | | | | | | Introducing the LM3692x Dual-String white LED driver. Data sheet is located http://www.ti.com/lit/ds/snvsa29/snvsa29.pdf Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* Merge tag 'leds_for_4.15rc1' of ↵Linus Torvalds2017-11-141-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "New LED class driver: - add a driver for PC Engines APU/APU2 LEDs New LED trigger: - add a system activity LED trigger LED core improvements: - replace flags bit shift with BIT() macros Convert timers to use timer_setup() in: - led-core - ledtrig-activity - ledtrig-heartbeat - ledtrig-transient LED class drivers fixes: - lp55xx: fix spelling mistake: 'cound' -> 'could' - tca6507: Remove unnecessary reg check - pca955x: Don't invert requested value in pca955x_gpio_set_value() LED documentation improvements: - update 00-INDEX file" * tag 'leds_for_4.15rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: Add driver for PC Engines APU/APU2 LEDs leds: lp55xx: fix spelling mistake: 'cound' -> 'could' leds: Convert timers to use timer_setup() Documentation: leds: Update 00-INDEX file leds: tca6507: Remove unnecessary reg check leds: ledtrig-heartbeat: Convert timers to use timer_setup() leds: Replace flags bit shift with BIT() macros leds: pca955x: Don't invert requested value in pca955x_gpio_set_value() leds: ledtrig-activity: Add a system activity LED trigger
| * leds: Add driver for PC Engines APU/APU2 LEDsAlan Mizrahi2017-11-061-0/+1
| | | | | | | | | | | | | | | | This patch implements the driver to support the front panel LEDs for PC Engines APU and APU2 boards. Signed-off-by: Alan Mizrahi <alan@mizrahi.com.ve> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* | License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-021-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* media: leds: as3645a: Add LED flash class driverSakari Ailus2017-08-261-0/+1
| | | | | | | | | | Add a LED flash class driver for the as3654a flash controller. A V4L2 flash driver for it already exists (drivers/media/i2c/as3645a.c), and this driver is based on that. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* leds: Remove SEAD-3 driverPaul Burton2017-06-191-1/+0
| | | | | | | | | | | | | | | | SEAD3 is using the generic syscon & regmap based register-bit-led driver as of commit c764583f40b8 ("MIPS: SEAD3: Use register-bit-led driver via DT for LEDs") merged in the v4.9 cycle. As such the custom SEAD-3 LED driver is now unused, so remove it. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: linux-leds@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: Delete obsolete Versatile driverLinus Walleij2017-05-141-1/+0
| | | | | | | | | All users of the Versatile LED driver are deleted and replaced with the very generic leds-syscon. Delete the old driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: cpcap: new driverSebastian Reichel2017-03-291-0/+1
| | | | | | | | | | | | | Motorola CPCAP is a PMIC (power management integrated circuit) found in multiple smartphones. This driver adds support for the chip's LED controllers. This introduces support for all controllers used by the Droid 4. According to Motorola's driver (no datasheets available) there a couple of more LED controllers. I did not add support for them, since I cannot verify that they work with my modifications. Signed-off-by: Sebastian Reichel <sre@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: Add LED support for MT6323 PMICSean Wang2017-03-211-0/+1
| | | | | | | | | MT6323 PMIC is a multi-function device that includes LED function. It allows attaching up to 4 LEDs which can either be on, off or dimmed and/or blinked with the controller. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* dell-led: move driver to drivers/platform/x86/dell-wmi-led.cMichał Kępień2017-03-061-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | The dell-led driver handles a specific WMI GUID present on some Dell laptops and as such it belongs in the x86 platform driver subsystem. Source code is moved along with the relevant Kconfig and Makefile entries, with some minor modifications: - Kconfig option is renamed from CONFIG_LEDS_DELL_NETBOOKS to CONFIG_DELL_WMI_LED, - the X86 Kconfig dependency is removed as the whole drivers/platform/x86 menu depends on it, so there is no need to duplicate it, - the name of the module's source file is removed from the header comment to avoid the need to update it in the future. Signed-off-by: Michał Kępień <kernel@kempniu.pl> Tested-by: Alex Hung <alex.hung@canonical.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: Add user LED driver for NIC78bx deviceHui Chun Ong2016-11-221-0/+1
| | | | | | | | | Add the driver to support User LEDs on PXI Embedded Controller. Signed-off-by: Hui Chun Ong <hui.chun.ong@ni.com> Signed-off-by: Brad Mouring <brad.mouring@ni.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
* leds: Introduce userspace LED class driverDavid Lechner2016-11-221-0/+3
| | | | | | | | | | | | | | This driver creates a userspace leds driver similar to uinput. New LEDs are created by opening /dev/uleds and writing a uleds_user_dev struct. A new LED class device is registered with the name given in the struct. Reading will return a single byte that is the current brightness. The poll() syscall is also supported. It will be triggered whenever the brightness changes. Closing the file handle to /dev/uleds will remove the leds class device. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
* leds: add driver for Mellanox systems LEDsVadim Pasternak2016-09-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This makes it possible to create a set of LEDs for Mellanox systems: "msx6710", "msx6720", "msb7700", "msn2700", "msx1410", "msn2410", "msb7800", "msn2740", "msn2100". Driver obtains LED devices according to system configuration, provided through system DMI data, like mlxcpld:fan1:green, mlxcpld:fan1:red and creates devices in form: "devicename:colour:function". LED setting is controlled through on board CPLD Lattice device. For setting particular LED off, solid, blink: echo 0 > /sys/class/leds/mlxcpld\:status\:green/brightness echo 1 > /sys/class/leds/mlxcpld\:status\:green/brightness echo timer > /sys/class/leds/mlxcpld\:status\:green/trigger On module probing all LEDs are set green, on removing - off. Last setting overwrites previous, f.e. sequence for changing LED from green - red - green: echo 1 > /sys/class/leds/mlxcpld\:psu\:green/brightness echo 1 > /sys/class/leds/mlxcpld\:psu\:red/brightness echo 1 > /sys/class/leds/mlxcpld\:psu\:green/brightness Note: LEDs cannot be turned on/off simultaneously. The Kconfig currently controlling compilation of this code is: drivers/leds/Kconfig:config LEDS_MLXCPLD Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
* leds: add PM8058 LEDs driverLinus Walleij2016-08-161-0/+1
| | | | | | | | | | | | | | | | | | This adds a driver for the six PM8058 LEDs, three ordinary LEDs, two "flash" LEDs and one "keypad" LED. The "keypad" and "flash" LEDs are not really hard-wired to these usecases: for example on the APQ8060 Dragonboard, the "keypad" LED is instead used to drive an IR LED used for the proximity sensor. The "flash" LEDs are just ordinary high-current LED drivers. Cc: linux-arm-msm@vger.kernel.org Cc: Andy Gross <andy.gross@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
* leds: is31fl319x: 1/3/6/9-channel light effect led driverH. Nikolaus Schaller2016-08-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This is a driver for the Integrated Silicon Solution Inc. LED driver chips series IS31FL319x. They can drive 1, 3, 6 or up to 9 LEDs. Each LED is individually controllable in brightness (through pwm) in 256 steps so that RGB LEDs can show any of ca. 16 Mio colors. The maximum current of the LEDs can be programmed and limited to 5 .. 40mA through a device tree property. The chip is connected through I2C and can have one of 4 addresses in the range 0x64 .. 0x67 depending on how the AD pin is connected. The address is defined by the reg property as usual. The chip also has a shutdown input which could be connected to a GPIO, but this driver uses software shutdown if all LEDs are inactivated. The chip also has breathing and audio features which are not fully supported by this driver. Tested-on: OMAP5 based Pyra handheld prototype. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Andrey Utkin <andrey_utkin@fastmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
* leds: LED driver for TI LP3952 6-Channel Color LEDTony Makkiel2016-07-181-0/+1
| | | | | | | | | | | | | The chip can drive 2 sets of RGB leds. Controller can be controlled via PWM, I2C and audio synchronisation. This driver uses I2C to communicate with the chip. Datasheet: http://www.ti.com/lit/gpn/lp3952 Signed-off-by: Tony Makkiel <tony.makkiel@daqri.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
* leds: Add driver for the ISSI IS31FL32xx family of LED controllersDavid Rivshin2016-03-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The IS31FL32xx family of LED controllers are I2C devices with multiple constant-current channels, each with independent 256-level PWM control. Datasheets: http://www.issi.com/US/product-analog-fxled-driver.shtml This has been tested on the IS31FL3236 and IS31FL3216, on an ARM (TI am335x) platform. The programming paradigm of these devices is similar in the following ways: - All registers are 8 bit - All LED control registers are write-only - Each LED channel has a PWM register (0-255) - PWM register writes are shadowed until an Update register is poked - All have a concept of Software Shutdown, which disables output However, there are some differences in devices: - 3236/3235 have a separate Control register for each LED, (3218/3216 pack the enable bits into fewer registers) - 3236/3235 have a per-channel current divisor setting - 3236/3235 have a Global Control register that can turn off all LEDs - 3216 is unique in a number of ways - OUT9-OUT16 can be configured as GPIOs instead of LED controls - LEDs can be programmed with an 8-frame animation, with programmable delay between frames - LEDs can be modulated by an input audio signal - Max output current can be adjusted from 1/4 to 2x globally - Has a Configuration register instead of a Shutdown register This driver currently only supports the base PWM control function of these devices. The following features of these devices are not implemented, although it should be possible to add them in the future: - All devices are capable of going into a lower-power "software shutdown" mode. - The is31fl3236 and is31fl3235 can reduce the max output current per-channel with a divisor of 1, 2, 3, or 4. - The is31fl3216 can use some LED channels as GPIOs instead. - The is31fl3216 can animate LEDs in hardware. - The is31fl3216 can modulate LEDs according to an audio input. - The is31fl3216 can reduce/increase max output current globally. Signed-off-by: David Rivshin <drivshin@allworx.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
* LED/MIPS: Move SEAD3 LED driver to where it belongs.Ralf Baechle2015-11-031-0/+1
| | | | | | | | | | | | | | | Fixes the following randconfig problem leds-sead3.c:(.text+0x7dc): undefined reference to `led_classdev_unregister' leds-sead3.c:(.text+0x7e8): undefined reference to `led_classdev_unregister' Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Bryan Wu <cooloney@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-leds@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
* Merge tag 'backlight-for-linus-4.3' of ↵Linus Torvalds2015-09-041-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: - Stop using LP855X Platform Data to control regulators - Move PWM8941 WLED driver into Backlight - Remove invalid use of IS_ERR_VALUE() macro - Remove duplicate check for NULL data before unregistering - Export I2C Device ID structure * tag 'backlight-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: tosa: Export I2C module alias information backlight: lp8788_bl: Delete a check before backlight_device_unregister() backlight: sky81452: Remove unneeded use of IS_ERR_VALUE() macro backlight: pm8941-wled: Move PM8941 WLED driver to backlight backlight: lp855x: Use private data for regulator control
| * backlight: pm8941-wled: Move PM8941 WLED driver to backlightBjorn Andersson2015-08-251-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | The Qualcomm PM8941 WLED block is used for backlight and should therefor be in the backlight framework and not in the LED framework. This moves the driver and adapts to the backlight api instead. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Tested-by: Rob Clark <robdclark@gmail.com> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* | leds/powernv: Add driver for PowerNV platformVasant Hegde2015-08-201-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements LED driver for PowerNV platform using the existing generic LED class framework. PowerNV platform has below type of LEDs: - System attention Indicates there is a problem with the system that needs attention. - Identify Helps the user locate/identify a particular FRU or resource in the system. - Fault Indicates there is a problem with the FRU or resource at the location with which the indicator is associated. We register classdev structures for all individual LEDs detected on the system through LED specific device tree nodes. Device tree nodes specify what all kind of LEDs present on the same location code. It registers LED classdev structure for each of them. All the system LEDs can be found in the same regular path /sys/class/leds/. We don't use LED colors. We use LED node and led-types property to form LED classdev. Our LEDs have names in this format. <location_code>:<attention|identify|fault> Any positive brightness value would turn on the LED and a zero value would turn off the LED. The driver will return LED_FULL (255) for any turned on LED and LED_OFF (0) for any turned off LED. The platform level implementation of LED get and set state has been achieved through OPAL calls. These calls are made available for the driver by exporting from architecture specific codes. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com> Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* leds: add BCM6358 LED driverÁlvaro Fernández Rojas2015-05-251-0/+1
| | | | | | | | This adds support for the LED controller on Broadcom's BCM6358. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* leds: Add ktd2692 flash LED driverIngi Kim2015-05-251-0/+1
| | | | | | | | | | | This patch adds a driver to support the ktd2692 flash LEDs. ktd2692 can control flash current by ExpressWire interface. Signed-off-by: Ingi Kim <ingi2.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* leds: add BCM6328 LED driverÁlvaro Fernández Rojas2015-05-041-0/+1
| | | | | | | | | This adds support for the LED controller on Broadcom's BCM6328. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* leds: Add driver for AAT1290 flash LED controllerJacek Anaszewski2015-05-041-0/+1
| | | | | | | | | | | | This patch adds a driver for the 1.5A Step-Up Current Regulator for Flash LEDs. The device is programmed through a Skyworks proprietary AS2Cwire serial digital interface. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* leds: Add support for max77693 mfd flash cellJacek Anaszewski2015-05-041-0/+1
| | | | | | | | | | | | | | | This patch adds led-flash support to Maxim max77693 chipset. A device can be exposed to user space through LED subsystem sysfs interface. Device supports up to two leds which can work in flash and torch mode. The leds can be triggered externally or by software. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* leds: tlc591xx: Driver for the TI 8/16 Channel i2c LED driverAndrew Lunn2015-05-041-0/+1
| | | | | | | | | | | | | | | | | | The TLC59116 is an I2C bus controlled 16-channel LED driver. The TLC59108 is an I2C bus controlled 8-channel LED driver, which is very similar to the TLC59116. Each LED output has its own 8-bit fixed-frequency PWM controller to control the brightness of the LED. The LEDs can also be fixed off and on, making them suitable for use as GPOs. This is based on a driver from Belkin, but has been extensively rewritten and extended to support both 08 and 16 versions. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Imre Kaloz <kaloz@openwrt.org> Cc: Matthew.Fatheree@belkin.com Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* leds: add Qualcomm PM8941 WLED driverCourtney Cavin2015-03-301-0/+1
| | | | | | | | | | | This adds support for the WLED ('White' LED) block on Qualcomm's PM8941 PMICs. (cooloney@gmail.com: remove unneeded semicolon) Signed-off-by: Courtney Cavin <courtney.cavin@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* leds: Add LED Flash class extension to the LED subsystemJacek Anaszewski2015-01-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | Some LED devices support two operation modes - torch and flash. This patch provides support for flash LED devices in the LED subsystem by introducing new sysfs attributes and kernel internal interface. The attributes being introduced are: flash_brightness, flash_strobe, flash_timeout, max_flash_timeout, max_flash_brightness, flash_fault, flash_sync_strobe and available_sync_leds. All the flash related features are placed in a separate module. The modifications aim to be compatible with V4L2 framework requirements related to the flash devices management. The design assumes that V4L2 sub-device can take of the LED class device control and communicate with it through the kernel internal interface. When V4L2 Flash sub-device file is opened, the LED class device sysfs interface is made unavailable. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* leds: lp8860: Introduce TI lp8860 4 channel LED driverDan Murphy2014-11-191-0/+1
| | | | | | | | | | | | | | | Introduce the Texas Instruments lp8860 4 channel LED driver. This driver configures the device in display cluster mode as this seems to be the most used configuration at the time of the driver configuration. For more product information please see the link below: http://www.ti.com/product/lp8860-q1 Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* Merge tag 'hwmon-for-linus-v3.18' of ↵Linus Torvalds2014-10-101-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: - new driver for menf21bmc. - convert k10temp, smsc47b397, da9052, da9055 to new hwmon API. - register ntc_thermistor driver with thermal subsystem. - add support for F15h M60h to k10temp driver. - add driver for MEN14F021P00 BMC HWMON driver; this required a merge with tag mfd-hwmon-leds-watchdog-v3.18 * tag 'hwmon-for-linus-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ab8500) Call kernel_power_off instead of pm_power_off hwmon: (menf21bmc) Introduce MEN14F021P00 BMC HWMON driver leds: leds-menf21bmc: Introduce MEN 14F021P00 BMC LED driver watchdog: menf21bmc_wdt: Introduce MEN 14F021P00 BMC Watchdog driver mfd: menf21bmc: Introduce MEN 14F021P00 BMC MFD Core driver hwmon: (ntc_thermistor) Add ntc thermistor to thermal subsystem as a sensor. hwmon: (smsc47b397) Convert to devm_hwmon_device_register_with_groups MAINTAINERS: add entry for the PWM fan driver hwmon: (k10temp) Convert to devm_hwmon_device_register_with_groups hwmon: (k10temp) Add support for F15h M60h hwmon: (da9052) Convert to devm_hwmon_device_register_with_groups hwmon: (da9055) Convert to devm_hwmon_device_register_with_groups hwmon: (ads1015) Use of_property_read_u32 at appropriate places
| * leds: leds-menf21bmc: Introduce MEN 14F021P00 BMC LED driverAndreas Werner2014-09-241-0/+1
| | | | | | | | | | | | | | | | | | | | Added driver to support the 14F021P00 BMC LEDs. The BMC is a Board Management Controller including four LEDs which can be switched on and off. Signed-off-by: Andreas Werner <andreas.werner@men.de> Acked-by: Bryan Wu <cooloney@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* | leds: add a driver for syscon-based LEDsLinus Walleij2014-09-261-0/+1
|/ | | | | | | | | | | | | | This makes it possible to create a set of LEDs from a syscon MFD instance, which is lean mean and clean on the ARM reference designs and can replace the Versatile LEDs driver in the long run, as well as other custom syscon LEDs drivers. Cc: Bryan Wu <cooloney@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> [Fixed cocinelle warnings] Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Merge tag 'drivers-for-3.17' of ↵Linus Torvalds2014-08-081-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Olof Johansson: "A handful of driver-related changes. We've had a bunch of them going in through other branches as well, so it's only a part of what we really have this release. Larger pieces are: - Removal of a now unused PWM driver for atmel [ This includes AVR32 changes that have been appropriately acked ] - Performance counter support for the arm CCN interconnect - OMAP mailbox driver cleanups and consolidation - PCI and SATA PHY drivers for SPEAr 13xx platforms - Redefinition (with backwards compatibility!) of PCI DT bindings for Tegra to better model regulators/power" Note: this merge also fixes up the semantic conflict with the new calling convention for devm_phy_create(), see commit f0ed817638b5 ("phy: core: Let node ptr of PHY point to PHY and not of PHY provider") that came in through Greg's USB tree. Semantic merge patch by Stephen Rothwell <sfr@canb.auug.org.au> through the next tree. * tag 'drivers-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) bus: arm-ccn: Fix error handling at event allocation mailbox/omap: add a parent structure for every IP instance mailbox/omap: remove the private mailbox structure mailbox/omap: consolidate OMAP mailbox driver mailbox/omap: simplify the fifo assignment by using macros mailbox/omap: remove omap_mbox_type_t from mailbox ops mailbox/omap: remove OMAP1 mailbox driver mailbox/omap: use devm_* interfaces bus: ARM CCN: add PERF_EVENTS dependency bus: ARM CCN PMU driver PCI: spear: Remove spear13xx_pcie_remove() PCI: spear: Fix Section mismatch compilation warning for probe() ARM: tegra: Remove legacy PCIe power supply properties PCI: tegra: Remove deprecated power supply properties PCI: tegra: Implement accurate power supply scheme ARM: SPEAr13xx: Update defconfigs ARM: SPEAr13xx: Add pcie and miphy DT nodes ARM: SPEAr13xx: Add bindings and dt node for misc block ARM: SPEAr13xx: Fix static mapping table phy: Add drivers for PCIe and SATA phy on SPEAr13xx ...
| * leds: atmel-pwm: remove obsolete driverAlexandre Belloni2014-07-091-1/+0
| | | | | | | | | | | | | | | | | | | | The leds-atmel-pwm driver is now obsolete. It is not used by any mainlined boards and is replaced by the generic leds_pwm with the pwm-atmel driver using the generic PWM framework. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Bryan Wu <cooloney@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* | leds: add driver for the iPAQ microLinus Walleij2014-07-231-0/+1
|/ | | | | | | This adds a driver for the iPAQ microcontroller LED. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* Merge branch 'for-next' of ↵Linus Torvalds2014-06-121-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED updates from Bryan Wu: "I just found merge window is open and I'm quite busy and almost forget to send out this pull request. Thanks Russell and Alexandre ping me about this. So basically we got some clean up and leds-pwm fixing patches from Russell" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: Remove duplicated OOM message for individual driver drivers/leds: Replace __get_cpu_var use through this_cpu_ptr leds: lp55xx: add DT bindings for LP55231 leds: 88pm860x: Fix missing refcount decrement for parent of_node leds: 88pm860x: Use of_get_child_by_name leds: leds-pwm: add DT support for LEDs wired to supply leds: leds-pwm: implement PWM inversion leds: leds-pwm: convert OF parsing code to use led_pwm_add() leds: leds-pwm: provide a common function to setup a single led-pwm device leds: pca9685: Remove leds-pca9685 driver dell-led: add mic mute led interface
| * leds: pca9685: Remove leds-pca9685 driverAxel Lin2014-05-081-1/+0
| | | | | | | | | | | | | | | | | | | | This driver is replaced by pwm-pca9685 driver and there is no user uses this driver in current tree. So remove it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Acked-by: Maximilian Güntner <maximilian.guentner@gmail.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* | ARM/leds: move ARM Versatile LED driver to leds subsystemLinus Walleij2014-03-281-0/+1
|/ | | | | | | | | | | | Now that we have converted this driver to a real platform device module-based thing, we move the driver down into the LEDs subsystem and rename the config option to LEDS_VERSATILE. Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Russell King <linux@arm.linux.org.uk> Cc: Pawel Moll <pawel.moll@arm.com> Acked-by: Bryan Wu <cooloney@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* leds: Added driver for the NXP PCA9685 I2C chipMaximilian Güntner2013-10-221-0/+1
| | | | | | | | | The NXP PCA9685 supports 16 channels/leds using a 12-bit PWM (4095 levels of brightness) This driver supports configuration using platform_data. Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* Merge branch 'for-next' of ↵Linus Torvalds2013-09-121-1/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull led updates from Bryan Wu: "Sorry for the late pull request, since I'm just back from vacation. LED subsystem updates for 3.12: - pca9633 driver DT supporting and pca9634 chip supporting - restore legacy device attributes for lp5521 - other fixing and updates" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (28 commits) leds: wm831x-status: Request a REG resource leds: trigger: ledtrig-backlight: Fix invalid memory access in fb_event notification callback leds-pca963x: Fix device tree parsing leds-pca9633: Rename to leds-pca963x leds-pca9633: Add mutex to the ledout register leds-pca9633: Unique naming of the LEDs leds-pca9633: Add support for PCA9634 leds: lp5562: use LP55xx common macros for device attributes Documentation: leds-lp5521,lp5523: update device attribute information leds: lp5523: remove unnecessary writing commands leds: lp5523: restore legacy device attributes leds: lp5523: LED MUX configuration on initializing leds: lp5523: make separate API for loading engine leds: lp5521: remove unnecessary writing commands leds: lp5521: restore legacy device attributes leds: lp55xx: add common macros for device attributes leds: lp55xx: add common data structure for program Documentation: leds: Fix a typo leds: ss4200: Fix incorrect placement of __initdata leds: clevo-mail: Fix incorrect placement of __initdata ...
| * leds-pca9633: Rename to leds-pca963xRicardo Ribalda Delgado2013-08-261-1/+1
| | | | | | | | | | | | | | | | The driver now supports the chips pca9633 and pca9634, therefore we rename the files to more generic and meaningul names Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
| * leds: support new LP8501 device - another LP55xx commonKim, Milo2013-08-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LP8501 can drive up to 9 channels like LP5523. LEDs can be controlled directly via the I2C and programmable engines are supported. LP55xx common driver LP8501 is one of LP55xx family device, so LP55xx common code are used. Chip specific data is defined in the structure, 'lp55xx_device_config'. Differences between LP8501 and LP5523 Different register layout for LED output control and others. LP8501 specific feature for separate output power selection. LP8501 doesn't support external clock detection. Different programming engine data. LP8501 specific feature - output power selection Output channels are selected by power selection - Vout or Vdd. Separate power for VDD1-6 and VDD7-9 are available. It is configurable in the platform data. To support this feature, LP55xx DT structure and header are changed. Device tree binding is updated as well. LED pattern data Example pattern data is updated in the driver documentation. Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* | leds: Remove leds-renesas-tpu driverLaurent Pinchart2013-07-221-1/+0
|/ | | | | | | | | The driver is superseded by the generic pwm-renesas-tpu driver used with leds-pwm. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Bryan Wu <cooloney@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* leds: move LED trigger drivers into new subdirectoryKim, Milo2013-04-011-9/+1
| | | | | | | | | | | | | For better driver management, new subdirectory, 'trigger' is created. All LED trigger drivers are moved into this directory. Internal header, 'leds.h' is included in each LED trigger drivers. Fix the location of header file, "leds.h" -> "../leds.h" in driver files. One exception is here, 'ledtrig-timer.c'. There is no need to include 'leds.h'. so '#include "leds.h"' line was removed. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
OpenPOWER on IntegriCloud