summaryrefslogtreecommitdiffstats
path: root/drivers/irqchip/Kconfig
Commit message (Collapse)AuthorAgeFilesLines
* irqchip/irq-goldfish-pic: Add Goldfish PIC driverMiodrag Dinic2018-01-041-0/+8
| | | | | | | | | | | | | | Add device driver for a virtual programmable interrupt controller The virtual PIC is designed as a device tree-based interrupt controller. The compatible string used by OS for binding the driver is "google,goldfish-pic". Signed-off-by: Miodrag Dinic <miodrag.dinic@mips.com> Signed-off-by: Goran Ferenc <goran.ferenc@mips.com> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* Merge tag 'irqchip-4.15-4' of ↵Thomas Gleixner2017-11-141-0/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip updates for 4.15, take #4 from Marc Zyngier - A core irq fix for legacy cases where the irq trigger is not reported by firmware - A couple of GICv3/4 fixes (Kconfig, of-node refcount, error handling) - Trivial pr_err fixes
| * irqchip/gic-v3-its: Remove artificial dependency on PCIMarc Zyngier2017-11-131-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The GICv3 ITS doesn't really depend on PCI. Only the PCI/MSI part of it does, and there is no reason not to blow away most of the irqchip stack because PCI is not selected (though not selecting PCI seem to be asking for punishment, but hey...). So let's split the PCI-specific part from the ITS in the Kconfig file, and let's make that part depend on PCI. Architecture specific hacks (arch/arm{,64}/Kconfig) will be addressed in a separate patch. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* | Merge branch 'irq-core-for-linus' of ↵Linus Torvalds2017-11-131-0/+13
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq core updates from Thomas Gleixner: "A rather large update for the interrupt core code and the irq chip drivers: - Add a new bitmap matrix allocator and supporting changes, which is used to replace the x86 vector allocator which comes with separate pull request. This allows to replace the convoluted nested loop allocation function in x86 with a facility which supports the recently added property of managed interrupts proper and allows to switch to a best effort vector reservation scheme, which addresses problems with vector exhaustion. - A large update to the ARM GIC-V3-ITS driver adding support for range selectors. - New interrupt controllers: - Meson and Meson8 GPIO - BCM7271 L2 - Socionext EXIU If you expected that this will stop at some point, I have to disappoint you. There are new ones posted already. Sigh! - STM32 interrupt controller support for new platforms. - A pile of fixes, cleanups and updates to the MIPS GIC driver - The usual small fixes, cleanups and updates all over the place. Most visible one is to move the irq chip drivers Kconfig switches into a separate Kconfig menu" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits) genirq: Fix type of shifting literal 1 in __setup_irq() irqdomain: Drop pointless NULL check in virq_debug_show_one genirq/proc: Return proper error code when irq_set_affinity() fails irq/work: Use llist_for_each_entry_safe irqchip: mips-gic: Print warning if inherited GIC base is used irqchip/mips-gic: Add pr_fmt and reword pr_* messages irqchip/stm32: Move the wakeup on interrupt mask irqchip/stm32: Fix initial values irqchip/stm32: Add stm32h7 support dt-bindings/interrupt-controllers: Add compatible string for stm32h7 irqchip/stm32: Add multi-bank management irqchip/stm32: Select GENERIC_IRQ_CHIP irqchip/exiu: Add support for Socionext Synquacer EXIU controller dt-bindings: Add description of Socionext EXIU interrupt controller irqchip/gic-v3-its: Fix VPE activate callback return value irqchip: mips-gic: Make IPI bitmaps static irqchip: mips-gic: Share register writes in gic_set_type() irqchip: mips-gic: Remove gic_vpes variable irqchip: mips-gic: Use num_possible_cpus() to reserve IPIs irqchip: mips-gic: Configure EIC when CPUs come online ...
| * \ Merge tag 'irqchip-4.15-3' of ↵Thomas Gleixner2017-11-091-0/+1
| |\ \ | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates for 4.15, take #3 from Marc Zyngier: - New Socionext Synquacer EXIU driver - stm32 new platform support and fixes - One GICv4 bugfix - A couple of MIPS GIC cleanups
| | * irqchip/stm32: Select GENERIC_IRQ_CHIPLudovic Barre2017-11-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds GENERIC_IRQ_CHIP to stm32 exti config. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
| * | irqchip/meson: Disable COMPILE_TESTThomas Gleixner2017-10-201-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver fails to compile with CONFIG_COMPILE_TEST=y on x86: irq-meson-gpio.c: In function ‘meson_gpio_irq_parse_dt’: irq-meson-gpio.c:343:8: error: implicit declaration of function ‘of_property_read_variable_u32_array’ ret = of_property_read_variable_u32_array(node, Adding COMPILE_TEST to a driver requires at least compile testing it for x86.... Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Marc Zyngier <marc.zyngier@arm.com>
| * irqchip/meson: Add support for gpio interrupt controllerJerome Brunet2017-10-191-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the interrupt gpio controller found on Amlogic's meson SoC family. This controller is a separate controller from the gpio controller. It is able to spy on the SoC pad. It is essentially a 256 to 8 router with a filtering block to select level or edge and polarity. The number of actual mappable inputs depends on the SoC. Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
| * irqchip: Add Kconfig menuRandy Dunlap2017-10-161-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a menu for IRQ chip drivers. This makes the Device drivers menu be more consistent (listing "subsystems" instead of specific options) and makes the IRQCHIP options be listed in expected places for 'make menu|xconfig'. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Cooper <jason@lakedaemon.net> Link: https://lkml.kernel.org/r/3db7385a-c6a1-5c93-0797-6f4b6b2b2cde@infradead.org
* | irqchip: add initial support for ompicStafford Horne2017-11-031-0/+3
|/ | | | | | | | | | | | | | | | | | | | | | | IPI driver for the Open Multi-Processor Interrupt Controller (ompic) as described in the Multi-core support section of the OpenRISC 1.2 architecture specification: https://github.com/openrisc/doc/raw/master/openrisc-arch-1.2-rev0.pdf Each OpenRISC core contains a full interrupt controller which is used in the SMP architecture for interrupt balancing. This IPI device, the ompic, is the only external device required for enabling SMP on OpenRISC. Pending ops are stored in a memory bit mask which can allow multiple pending operations to be set and serviced at a time. This is mostly borrowed from the alpha IPI implementation. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> [shorne@gmail.com: converted ops to bitmask, wrote commit message] Signed-off-by: Stafford Horne <shorne@gmail.com>
* Merge tag 'irqchip-4.14' of ↵Thomas Gleixner2017-08-311-0/+8
|\ | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates for 4.14 from Marc Zyngier: - irqchip-specific part of the monster GICv4 series - new UniPhier AIDET irqchip driver - new variants of some Freescale MSI widget - blanket removal of of_node->full_name in printk - random collection of fixes
| * irqchip: Add UniPhier AIDET irqchip driverMasahiro Yamada2017-08-231-0/+8
| | | | | | | | | | | | | | | | | | | | | | UniPhier SoCs contain AIDET (ARM Interrupt Detector). This is intended to provide additional features that are not covered by GIC. The main purpose is to provide logic inverter to support low level and falling edge trigger types for interrupt lines from on-board devices. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* | irqchip/xtensa-mx: Report that effective affinity is a single targetMarc Zyngier2017-08-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The xtensa-mx driver only targets a single CPU at a time, even if the notional affinity is wider. Let's inform the core code about this. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Chris Zankel <chris@zankel.net> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: http://lkml.kernel.org/r/20170818083925.10108-13-marc.zyngier@arm.com
* | irqchip/mips-gic: Report that effective affinity is a single targetMarc Zyngier2017-08-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MIPS GIC driver only targets a single CPU at a time, even if the notional affinity is wider. Let's inform the core code about this. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Chris Zankel <chris@zankel.net> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: http://lkml.kernel.org/r/20170818083925.10108-12-marc.zyngier@arm.com
* | irqchip/bcm-7038-l1: Report that effective affinity is a single targetMarc Zyngier2017-08-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BCM 7038-L1 driver only targets a single CPU at a time, even if the notional affinity is wider. Let's inform the core code about this. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Chris Zankel <chris@zankel.net> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: http://lkml.kernel.org/r/20170818083925.10108-9-marc.zyngier@arm.com
* | irqchip/bcm-6345-l1: Report that effective affinity is a single targetMarc Zyngier2017-08-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BCM 6345-L1 driver only targets a single CPU at a time, even if the notional affinity is wider. Let's inform the core code about this. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Chris Zankel <chris@zankel.net> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: http://lkml.kernel.org/r/20170818083925.10108-8-marc.zyngier@arm.com
* | irqchip/armada-370-xp: Report that effective affinity is a single targetMarc Zyngier2017-08-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Armada 370 XP driver only targets a single CPU at a time, even if the notional affinity is wider. Let's inform the core code about this. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Chris Zankel <chris@zankel.net> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: http://lkml.kernel.org/r/20170818083925.10108-7-marc.zyngier@arm.com
* | irqchip/gic-v3: Report that effective affinity is a single targetMarc Zyngier2017-08-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GICv3 driver only targets a single CPU at a time, even if the notional affinity is wider. Let's inform the core code about this. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Chris Zankel <chris@zankel.net> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: http://lkml.kernel.org/r/20170818083925.10108-5-marc.zyngier@arm.com
* | irqchip/gic: Report that effective affinity is a single targetMarc Zyngier2017-08-181-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | The GIC driver only targets a single CPU at a time, even if the notional affinity is wider. Let's inform the core code about this. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Chris Zankel <chris@zankel.net> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: http://lkml.kernel.org/r/20170818083925.10108-4-marc.zyngier@arm.com
* Merge tag 'arm64-upstream' of ↵Linus Torvalds2017-07-051-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: - RAS reporting via GHES/APEI (ACPI) - Indirect ftrace trampolines for modules - Improvements to kernel fault reporting - Page poisoning - Sigframe cleanups and preparation for SVE context - Core dump fixes - Sparse fixes (mainly relating to endianness) - xgene SoC PMU v3 driver - Misc cleanups and non-critical fixes * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (75 commits) arm64: fix endianness annotation for 'struct jit_ctx' and friends arm64: cpuinfo: constify attribute_group structures. arm64: ptrace: Fix incorrect get_user() use in compat_vfp_set() arm64: ptrace: Remove redundant overrun check from compat_vfp_set() arm64: ptrace: Avoid setting compat FP[SC]R to garbage if get_user fails arm64: fix endianness annotation for __apply_alternatives()/get_alt_insn() arm64: fix endianness annotation in get_kaslr_seed() arm64: add missing conversion to __wsum in ip_fast_csum() arm64: fix endianness annotation in acpi_parking_protocol.c arm64: use readq() instead of readl() to read 64bit entry_point arm64: fix endianness annotation for reloc_insn_movw() & reloc_insn_imm() arm64: fix endianness annotation for aarch64_insn_write() arm64: fix endianness annotation in aarch64_insn_read() arm64: fix endianness annotation in call_undef_hook() arm64: fix endianness annotation for debug-monitors.c ras: mark stub functions as 'inline' arm64: pass endianness info to sparse arm64: ftrace: fix !CONFIG_ARM64_MODULE_PLTS kernels arm64: signal: Allow expansion of the signal frame acpi: apei: check for pending errors when probing GHES entries ...
| * ARM64/irqchip: Update ACPI_IORT symbol selection logicLorenzo Pieralisi2017-06-151-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ACPI IORT is an ACPI addendum to describe the connection topology of devices with IOMMUs and interrupt controllers on ARM64 ACPI systems. Currently the ACPI IORT Kbuild symbol is selected whenever the Kbuild symbol ARM_GIC_V3_ITS is enabled, which in turn is selected by ARM64 Kbuild defaults. This makes the logic behind ACPI_IORT selection a bit twisted and not easy to follow. On ARM64 systems enabling ACPI the kbuild symbol ACPI_IORT should always be selected in that it is a kernel layer provided to the ARM64 arch code to parse and enable ACPI firmware bindings. Make the ACPI_IORT selection explicit in ARM64 Kbuild and remove the selection from ARM_GIC_V3_ITS entry, making the ACPI_IORT selection logic clearer to follow. Acked-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
* | irqchip/irq-mvebu-icu: Add new driver for Marvell ICUThomas Petazzoni2017-06-231-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Marvell ICU unit is found in the CP110 block of the Marvell Armada 7K and 8K SoCs. It collects the wired interrupts of the devices located in the CP110 and turns them into SPI interrupts in the GIC located in the AP806 side of the SoC, by using a memory transaction. Until now, the ICU was configured in a static fashion by the firmware, and Linux was relying on this static configuration. By having Linux configure the ICU, we are more flexible, and we can allocate dynamically the GIC SPI interrupts only for devices that are actually in use. The driver was initially written by Hanna Hawa <hannah@marvell.com>. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* | irqchip/irq-mvebu-gicp: Add new driver for Marvell GICPThomas Petazzoni2017-06-231-0/+3
|/ | | | | | | | | | | | This commit adds a simple driver for the Marvell GICP, a hardware unit that converts memory writes into GIC SPI interrupts. The driver provides a number of functions to the ICU driver to allocate GICP interrupts, and get the physical addresses that the ICUs should write to to set/clear interrupts. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2017-05-121-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from James Hogan: "math-emu: - Add missing clearing of BLTZALL and BGEZALL emulation counters - Fix BC1EQZ and BC1NEZ condition handling - Fix BLEZL and BGTZL identification BPF: - Add JIT support for SKF_AD_HATYPE - Use unsigned access for unsigned SKB fields - Quit clobbering callee saved registers in JIT code - Fix multiple problems in JIT skb access helpers Loongson 3: - Select MIPS_L1_CACHE_SHIFT_6 Octeon: - Remove vestiges of CONFIG_CAVIUM_OCTEON_2ND_KERNEL - Remove unused L2C types and macros. - Remove unused SLI types and macros. - Fix compile error when USB is not enabled. - Octeon: Remove unused PCIERCX types and macros. - Octeon: Clean up platform code. SNI: - Remove recursive include of cpu-feature-overrides.h Sibyte: - Export symbol periph_rev to sb1250-mac network driver. - Fix Kconfig warning. Generic platform: - Enable Root FS on NFS in generic_defconfig SMP-MT: - Use CPU interrupt controller IPI IRQ domain support UASM: - Add support for LHU for uasm. - Remove needless ISA abstraction mm: - Add 48-bit VA space and 4-level page tables for 4K pages. PCI: - Add controllers before the specified head irqchip driver for MIPS CPU: - Replace magic 0x100 with IE_SW0 - Prepare for non-legacy IRQ domains - Introduce IPI IRQ domain support MAINTAINERS: - Update email-id of Rahul Bedarkar NET: - sb1250-mac: Add missing MODULE_LICENSE() CPUFREQ: - Loongson2: drop set_cpus_allowed_ptr() Misc: - Disable Werror when W= is set - Opt into HAVE_COPY_THREAD_TLS - Enable GENERIC_CPU_AUTOPROBE - Use common outgoing-CPU-notification code - Remove dead define of ST_OFF - Remove CONFIG_ARCH_HAS_ILOG2_U{32,64} - Stengthen IPI IRQ domain sanity check - Remove confusing else statement in __do_page_fault() - Don't unnecessarily include kmalloc.h into <asm/cache.h>. - Delete unused definition of SMP_CACHE_SHIFT. - Delete redundant definition of SMP_CACHE_BYTES" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (39 commits) MIPS: Sibyte: Fix Kconfig warning. MIPS: Sibyte: Export symbol periph_rev to sb1250-mac network driver. NET: sb1250-mac: Add missing MODULE_LICENSE() MAINTAINERS: Update email-id of Rahul Bedarkar MIPS: Remove confusing else statement in __do_page_fault() MIPS: Stengthen IPI IRQ domain sanity check MIPS: smp-mt: Use CPU interrupt controller IPI IRQ domain support irqchip: mips-cpu: Introduce IPI IRQ domain support irqchip: mips-cpu: Prepare for non-legacy IRQ domains irqchip: mips-cpu: Replace magic 0x100 with IE_SW0 MIPS: Remove CONFIG_ARCH_HAS_ILOG2_U{32,64} MIPS: generic: Enable Root FS on NFS in generic_defconfig MIPS: mach-rm: Remove recursive include of cpu-feature-overrides.h MIPS: Opt into HAVE_COPY_THREAD_TLS CPUFREQ: Loongson2: drop set_cpus_allowed_ptr() MIPS: uasm: Remove needless ISA abstraction MIPS: Remove dead define of ST_OFF MIPS: Use common outgoing-CPU-notification code MIPS: math-emu: Fix BC1EQZ and BC1NEZ condition handling MIPS: r2-on-r6-emu: Clear BLTZALL and BGEZALL debugfs counters ...
| * irqchip: mips-cpu: Introduce IPI IRQ domain supportPaul Burton2017-04-121-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce support for registering an IPI IRQ domain suitable for use by systems using the MIPS MT (multithreading) ASE within a single core. This will allow for such systems to be supported generically, without the current kludge of IPI code split between the MIPS arch & the malta board support code. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15836/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | Merge branch 'linus' into irq/coreThomas Gleixner2017-04-201-0/+1
|\ \ | |/ | | | | Pick up upstream fixes to avoid conflicts with pending patches.
| * irqchip/mvebu-odmi: Select GENERIC_MSI_IRQ_DOMAINArnd Bergmann2017-03-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver uses the MSI domain but has no strict dependency on PCI_MSI, so we may run into a build failure when CONFIG_GENERIC_MSI_IRQ_DOMAIN is disabled: drivers/irqchip/irq-mvebu-odmi.c:152:15: error: variable 'odmi_msi_ops' has initializer but incomplete type static struct msi_domain_ops odmi_msi_ops = { ^~~~~~~~~~~~~~ drivers/irqchip/irq-mvebu-odmi.c:155:15: error: variable 'odmi_msi_domain_info' has initializer but incomplete type static struct msi_domain_info odmi_msi_domain_info = { ^~~~~~~~~~~~~~~ drivers/irqchip/irq-mvebu-odmi.c:156:3: error: 'struct msi_domain_info' has no member named 'flags' .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS), ^~~~~ drivers/irqchip/irq-mvebu-odmi.c:156:12: error: 'MSI_FLAG_USE_DEF_DOM_OPS' undeclared here (not in a function) .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS), ^~~~~~~~~~~~~~~~~~~~~~~~ drivers/irqchip/irq-mvebu-odmi.c:156:39: error: 'MSI_FLAG_USE_DEF_CHIP_OPS' undeclared here (not in a function); did you mean 'MSI_FLAG_USE_DEF_DOM_OPS'? Selecting the option from this driver seems to solve this nicely, though I could not find any other instance of this in irqchip drivers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* | irqchip/gemini: Refactor Gemini driver to reflect Faraday originLinus Walleij2017-04-071-0/+6
|/ | | | | | | | | | | | | | | | | | | | | The Gemini irqchip turns out to be a standard IP component from Faraday Technology named FTINTC010 after some research and new information. - Rename the driver and all symbols to reflect the new information. - Add the new compatible string "faraday,ftintc010" - Create a Kconfig symbol CONFIG_FARADAY_FTINTC010 so that SoCs using this interrupt controller can easily select and reuse it instead of hardwiring it to ARCH_GEMINI I have created a separate patch to select the new Kconfig symbol from the Gemini machine, which will be merged through the ARM SoC tree. Cc: Greentime Hu <green.hu@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip/qcom: Add IRQ combiner driverAgustin Vega-Frias2017-02-031-0/+9
| | | | | | | | | | | | | | | | Driver for interrupt combiners in the Top-level Control and Status Registers (TCSR) hardware block in Qualcomm Technologies chips. An interrupt combiner in this block combines a set of interrupts by OR'ing the individual interrupt signals into a summary interrupt signal routed to a parent interrupt controller, and provides read- only, 32-bit registers to query the status of individual interrupts. The status bit for IRQ n is bit (n % 32) within register (n / 32) of the given combiner. Thus, each combiner can be described as a set of register offsets and the number of IRQs managed. Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* microblaze/irqchip: Move intc driver to irqchipZubair Lutfullah Kakakhel2016-11-291-0/+4
| | | | | | | | | | | | The Xilinx AXI Interrupt Controller IP block is used by the MIPS based xilfpga platform and a few PowerPC based platforms. Move the interrupt controller code out of arch/microblaze so that it can be used by everyone Tested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip/jcore: Don't show Kconfig menu item for driverRich Felker2016-10-201-2/+2
| | | | | | | | | | | | | | Core drivers for J-Core SoCs will be selected implicitly via CONFIG_SH_JCORE_SOC instead. Based on a corresponding change to the clocksource/timer driver requested by Daniel Lezcano. Signed-off-by: Rich Felker <dalias@libc.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-sh@vger.kernel.org Link: http://lkml.kernel.org/r/883a3d17084003e3cf21bab73ec12828fe4ff6c6.1476899495.git.dalias@libc.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Merge tag 'irqchip-core-4.9' of git://git.infradead.org/users/jcooper/linux ↵Thomas Gleixner2016-09-221-0/+10
|\ | | | | | | | | | | | | | | | | | | into irq/core Pull irqchip core changes for v4.9 from Jason Cooper - jcore: Add AIC driver - mips-gic: Use for_each_set_bit - mvebu: Add PIC driver
| * Merge branch 'irqchip/mvebu64' into irqchip/coreJason Cooper2016-08-231-0/+3
| |\
| | * irqchip/mvebu-pic: New driver for Marvell Armada 7K/8K PICThomas Petazzoni2016-08-221-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Marvell Armada 7K/8K integrates a secondary interrupt controller very originally named "PIC". It is connected to the main GIC via a PPI. Amongst other things, this PIC is used for the ARM PMU. This commit adds a simple irqchip driver for this interrupt controller. Since this interrupt controller is not needed early at boot time, we make the driver a proper platform driver rather than use the IRQCHIP_DECLARE() mechanism. Signed-off-by: Yehuda Yitschak <yehuday@marvell.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1470408921-447-3-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| * | irqchip/jcore-aic: Add J-Core AIC driverRich Felker2016-08-081-0/+7
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two versions of the J-Core interrupt controller in use, aic1 which generates interrupts with programmable priorities, but only supports 8 irq lines and maps them to cpu traps in the range 17 to 24, and aic2 which uses traps in the range 64-127 and supports up to 128 irqs, with priorities dependent on the interrupt number. The Linux driver does not make use of priorities anyway. For simplicity, there is no aic1-specific logic in the driver beyond setting the priority register, which is necessary for interrupts to work at all. Eventually aic1 will likely be phased out, but it's currently in use in deployments and all released bitstream binaries. Signed-off-by: Rich Felker <dalias@libc.org> Link: https://lkml.kernel.org/r/c3b89ef74aaa6477575dbe2d410eb1d182503243.147018b6529.git.dalias@libc.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | drivers/irqchip: Add STM32 external interrupts supportAlexandre TORGUE2016-09-211-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The STM32 external interrupt controller consists of edge detectors that generate interrupts requests or wake-up events. Each line can be independently configured as interrupt or wake-up source, and triggers either on rising, falling or both edges. Each line can also be masked independently. Originally-from: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: arnd@arndb.de Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: bruherrera@gmail.com Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: lee.jones@linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1474387259-18926-3-git-send-email-alexandre.torgue@st.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | irqchip/gicv3-its: Probe ITS in the ACPI wayTomasz Nowicki2016-09-121-0/+1
|/ | | | | | | | | | | | | | | | | | | | ITS is prepared for being initialized different than DT, therefore we can initialize it in ACPI way. We collect register base address from MADT table and pass mandatory info to firmware-agnostic ITS init call. Use here IORT lib to register ITS domain which then can be found and used on to build another PCI MSI domain in hierarchical stack domain. NOTE: Waiting for proper ITS and NUMA node relation description in IORT table, we pass around NUMA_NO_NODE to the its_probe_one init call. This means that Cavium ThunderX erratum 23144 (pass1.1 only) is not supported for ACPI boot method yet. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* Merge tag 'pci-v4.8-changes' of ↵Linus Torvalds2016-08-021-10/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Highlights: - ARM64 support for ACPI host bridges - new drivers for Axis ARTPEC-6 and Marvell Aardvark - new pci_alloc_irq_vectors() interface for MSI-X, MSI, legacy INTx - pci_resource_to_user() cleanup (more to come) Detailed summary: Enumeration: - Move ecam.h to linux/include/pci-ecam.h (Jayachandran C) - Add parent device field to ECAM struct pci_config_window (Jayachandran C) - Add generic MCFG table handling (Tomasz Nowicki) - Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki) - Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki) Resource management: - Add devm_request_pci_bus_resources() (Bjorn Helgaas) - Unify pci_resource_to_user() declarations (Bjorn Helgaas) - Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas) - Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas) - Make PCI I/O space optional on ARM32 (Bjorn Helgaas) - Ignore write combining when mapping I/O port space (Bjorn Helgaas) - Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas) - Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas) - Support I/O resources when parsing host bridge resources (Jayachandran C) - Add helpers to request/release memory and I/O regions (Johannes Thumshirn) - Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn) - Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5)) - Add generic pci_bus_claim_resources() (Lorenzo Pieralisi) - Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) - Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi) - Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya) - Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu) PCI device hotplug: - Allow additional bus numbers for hotplug bridges (Keith Busch) - Ignore interrupts during D3cold (Lukas Wunner) Power management: - Enforce type casting for pci_power_t (Andy Shevchenko) - Don't clear d3cold_allowed for PCIe ports (Mika Westerberg) - Put PCIe ports into D3 during suspend (Mika Westerberg) - Power on bridges before scanning new devices (Mika Westerberg) - Runtime resume bridge before rescan (Mika Westerberg) - Add runtime PM support for PCIe ports (Mika Westerberg) - Remove redundant check of pcie_set_clkpm (Shawn Lin) Virtualization: - Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra) - Add DMA alias quirk for Adaptec 3805 (Alex Williamson) - Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake) - Add ACS quirk for Solarflare SFC9220 (Edward Cree) MSI: - Fix PCI_MSI dependencies (Arnd Bergmann) - Add pci_msix_desc_addr() helper (Christoph Hellwig) - Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig) - Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig) - Provide sensible IRQ vector alloc/free routines (Christoph Hellwig) - Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig) Error Handling: - Bind DPC to Root Ports as well as Downstream Ports (Keith Busch) - Remove DPC tristate module option (Keith Busch) - Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg) Generic host bridge driver: - Select IRQ_DOMAIN (Arnd Bergmann) - Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) ACPI host bridge driver: - Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki) - Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki) - Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki) - Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki) Altera host bridge driver: - Check link status before retrain link (Ley Foon Tan) - Poll for link up status after retraining the link (Ley Foon Tan) Axis ARTPEC-6 host bridge driver: - Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann) - Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel) - Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel) Intel VMD host bridge driver: - Use lock save/restore in interrupt enable path (Jon Derrick) - Select device dma ops to override (Keith Busch) - Initialize list item in IRQ disable (Keith Busch) - Use x86_vector_domain as parent domain (Keith Busch) - Separate MSI and MSI-X vector sharing (Keith Busch) Marvell Aardvark host bridge driver: - Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni) - Add Aardvark PCI host controller driver (Thomas Petazzoni) - Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni) Microsoft Hyper-V host bridge driver: - Fix interrupt cleanup path (Cathy Avery) - Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov) - Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov) NVIDIA Tegra host bridge driver: - Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren) - Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren) - Use lower-case hex consistently for register definitions (Thierry Reding) - Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding) - Stop setting pcibios_min_mem (Thierry Reding) Renesas R-Car host bridge driver: - Drop gen2 dummy I/O port region (Bjorn Helgaas) TI DRA7xx host bridge driver: - Fix return value in case of error (Christophe JAILLET) Xilinx AXI host bridge driver: - Fix return value in case of error (Christophe JAILLET) Miscellaneous: - Make bus_attr_resource_alignment static (Ben Dooks) - Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks) - MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven) - Make host bridge drivers explicitly non-modular (Paul Gortmaker)" * tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (125 commits) PCI: xgene: Make explicitly non-modular PCI: thunder-pem: Make explicitly non-modular PCI: thunder-ecam: Make explicitly non-modular PCI: tegra: Make explicitly non-modular PCI: rcar-gen2: Make explicitly non-modular PCI: rcar: Make explicitly non-modular PCI: mvebu: Make explicitly non-modular PCI: layerscape: Make explicitly non-modular PCI: keystone: Make explicitly non-modular PCI: hisi: Make explicitly non-modular PCI: generic: Make explicitly non-modular PCI: designware-plat: Make it explicitly non-modular PCI: artpec6: Make explicitly non-modular PCI: armada8k: Make explicitly non-modular PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency PCI: Add ACS quirk for Solarflare SFC9220 arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700 PCI: aardvark: Add Aardvark PCI host controller driver dt-bindings: add DT binding for the Aardvark PCIe controller PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values ...
| * PCI/MSI: irqchip: Fix PCI_MSI dependenciesArnd Bergmann2016-06-151-10/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PCI_MSI symbol is used inconsistently throughout the tree, with some drivers using 'select' and others using 'depends on', or using conditional selects. This keeps causing problems; the latest one is a result of ARCH_ALPINE using a 'select' statement to enable its platform-specific MSI driver without enabling MSI: warning: (ARCH_ALPINE) selects ALPINE_MSI which has unmet direct dependencies (PCI && PCI_MSI) drivers/irqchip/irq-alpine-msi.c:104:15: error: variable 'alpine_msix_domain_info' has initializer but incomplete type static struct msi_domain_info alpine_msix_domain_info = { ^~~~~~~~~~~~~~~ drivers/irqchip/irq-alpine-msi.c:105:2: error: unknown field 'flags' specified in initializer .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | ^ drivers/irqchip/irq-alpine-msi.c:105:11: error: 'MSI_FLAG_USE_DEF_DOM_OPS' undeclared here (not in a function) .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | ^~~~~~~~~~~~~~~~~~~~~~~~ There is little reason to enable PCI support for a platform that uses MSI but then leave MSI disabled at compile time. Select PCI_MSI from irqchips that implement MSI, and make PCI host bridges that use MSI on ARM depend on PCI_MSI_IRQ_DOMAIN. For all three architectures that support PCI_MSI_IRQ_DOMAIN (ARM, ARM64, X86), enable it by default whenever MSI is enabled. [bhelgaas: changelog, omit crypto config change] Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
* | irqchip/gic: Add platform driver for non-root GICs that require RPMJon Hunter2016-06-131-0/+6
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a platform driver to support non-root GICs that require runtime power-management. Currently, only non-root GICs are supported because the functions, smp_cross_call() and set_handle_irq(), that need to be called for a root controller are located in the __init section and so cannot be called by the platform driver. The GIC platform driver re-uses many functions from the existing GIC driver including some functions to save and restore the GIC context during power transitions. The functions for saving and restoring the GIC context are currently only defined if CONFIG_CPU_PM is enabled and to ensure that these functions are always defined when the platform driver is enabled, a dependency on CONFIG_ARM_GIC_PM (which selects the platform driver) has been added. In order to re-use the private GIC initialisation code, a new public function, gic_of_init_child(), has been added which calls various private functions to initialise the GIC. This is different from the existing gic_of_init() because it only supports non-root GICs (ie. does not call smp_cross_call() is set_handle_irq()) and is not located in the __init section (so can be used by platform drivers). Furthermore, gic_of_init_child() dynamically allocates memory for the GIC chip data which is also different from gic_of_init(). There is no specific suspend handling for GICs registered as platform devices. Non-wakeup interrupts will be disabled by the kernel during late suspend, however, this alone will not power down the GIC if interrupts have been requested and not freed. Therefore, requestors of non-wakeup interrupts will need to free them on entering suspend in order to power-down the GIC. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip: nps: add 64BIT dependencyArnd Bergmann2016-05-201-0/+1
| | | | | | | | | | | | | | | | The newly added nps irqchip driver causes build warnings on ARM64. include/soc/nps/common.h: In function 'nps_host_reg_non_cl': include/soc/nps/common.h:148:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] As the driver is only used on ARC, we don't need to see it without COMPILE_TEST elsewhere, and we can avoid the warnings by only building on 32-bit architectures even with CONFIG_COMPILE_TEST. Acked-by: Marc Zyngier <narc.zyngier@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge tag 'arc-4.7-rc1' of ↵Linus Torvalds2016-05-191-0/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: "We have a relatively big changeset for ARC for 4.7. The highlight is support for EZChip (now Mellanox) NPS-400 network processor, a 400-Gb throughput C-programmable packet processor based on ARC700 cores from Synopsys. See http://www.mellanox.com/related-docs/prod_npu/PB_NPS-400.pdf Also present are irqchip and clocksource drivers for NPS as agreed with respective maintainers to go via ARC tree due to an soc header dependency. I have the needed ACKs from Jason, Marc, Daniel. You might run into a trivial merge conflict in drivers/irqchip/* This EZChip platform support required some deep changes in ARC architecture code and also opportunity to cleanup past sins (legacy irq domains, missing irq domain lookup, hard coded timer irqs...) Summary: - Support for EZChip (now Mellanox) NPS-400 Network processor based on ARC700 - NPS interrupt controller and clocksource drivers - ARC timers probed off DT - ARC iqrchips switching to linear domain (upgrade from legacy domains)" * tag 'arc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (37 commits) arc: axs103_smp: Fix CPU frequency to 100MHz for dual-core arc: axs10x: Add DT bindings for I2S PLL Clock ARC: pae: STRICT_MM_TYPECHECKS was broken ARC: Add eznps platform to Kconfig and Makefile ARC: [plat-eznps] Use dedicated COMMAND_LINE_SIZE ARC: [plat-eznps] Use dedicated cpu_relax() ARC: [plat-eznps] Use dedicated identity auxiliary register. ARC: [plat-eznps] Use dedicated SMP barriers ARC: [plat-eznps] Use dedicated atomic/bitops/cmpxchg ARC: [plat-eznps] Use dedicated user stack top ARC: [plat-eznps] Add eznps platform ARC: [plat-eznps] Add eznps board defconfig and dts ARC: Mark secondary cpu online only after all HW setup is done ARC: rwlock: disable interrupts in !LLSC variant ARC: Make vmalloc size configurable ARC: clean out UAPI byteorder.h clean off Kconfig symbol irqchip: add nps Internal and external irqchips clocksource: Add NPS400 timers driver soc: Support for EZchip SoC Documentation: Add EZchip vendor to binding list ...
| * irqchip: add nps Internal and external irqchipsNoam Camus2016-05-091-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding EZchip NPS400 support. Internal interrupts are handled by Multi Thread Manager (MTM) Once interrupt is serviced MTM is acked for deactivating the interrupt. External interrupts are handled by MTM as well as at Global Interrupt Controller (GIC) e.g. serial and network devices. Signed-off-by: Noam Camus <noamc@ezchip.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de>
* | irqchip: Add Layerscape SCFG MSI controller supportMinghuan Lian2016-05-041-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | Some kind of Freescale Layerscape SoC provides a MSI implementation which uses two SCFG registers MSIIR and MSIR to support 32 MSI interrupts for each PCIe controller. The patch is to support it. Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Tested-by: Alexander Stein <alexander.stein@systec-electronic.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* | irqchip/gic-v3: Add support for partitioned PPIsMarc Zyngier2016-05-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Plug the partitioning layer into the GICv3 PPI code, parsing the DT and building the partition affinities and providing the generic code with partition data and callbacks. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Will Deacon <will.deacon@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Link: http://lkml.kernel.org/r/1460365075-7316-5-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | irqchip: Add per-cpu interrupt partitioning libraryMarc Zyngier2016-05-021-0/+3
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We've unfortunately started seeing a situation where percpu interrupts are partitioned in the system: one arbitrary set of CPUs has an interrupt connected to a type of device, while another disjoint set of CPUs has the same interrupt connected to another type of device. This makes it impossible to have a device driver requesting this interrupt using the current percpu-interrupt abstraction, as the same interrupt number is now potentially claimed by at least two drivers, and we forbid interrupt sharing on per-cpu interrupt. A solution to this is to turn things upside down. Let's assume that our system describes all the possible partitions for a given interrupt, and give each of them a unique identifier. It is then possible to create a namespace where the affinity identifier itself is a form of interrupt number. At this point, it becomes easy to implement a set of partitions as a cascaded irqchip, each affinity identifier being the HW irq. This allows us to keep a number of nice properties: - Each partition results in a separate percpu-interrupt (with a restrictied affinity), which keeps drivers happy. - Because the underlying interrupt is still per-cpu, the overhead of the indirection can be kept pretty minimal. - The core code can ignore most of that crap. For that purpose, we implement a small library that deals with some of the boilerplate code, relying on platform-specific drivers to provide a description of the affinity sets and a set of callbacks. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Will Deacon <will.deacon@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Link: http://lkml.kernel.org/r/1460365075-7316-4-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* irqchip/mbigen: Make CONFIG_HISILICON_IRQ_MBIGEN a hidden optionMaJun2016-03-231-8/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | This config is selected by CONFIG_ARCH_HISI, so there is no point to have it user configurable. While at it move the config option to the proper place in the alphabetically sorted option list. Requested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ma Jun <majun258@huawei.com> Cc: mark.rutland@arm.com Cc: jason@lakedaemon.net Cc: marc.zyngier@arm.com Cc: Catalin.Marinas@arm.com Cc: guohanjun@huawei.com Cc: Will.Deacon@arm.com Cc: huxinwei@huawei.com Cc: lizefan@huawei.com Cc: dingtianhong@huawei.com Cc: zhaojunhua@hisilicon.com Cc: liguozhu@hisilicon.com Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1458723993-21044-3-git-send-email-majun258@huawei.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* irqchip: Add the Alpine MSIX interrupt controllerAntoine Tenart2016-03-091-0/+6
| | | | | | | | | This patch adds the Alpine MSIX interrupt controller driver. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Tsahee Zidenberg <tsahee@annapurnalabs.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* MIPS: Make smp CMP, CPS and MT use the new generic IPI functionsQais Yousef2016-02-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | This commit does several things to avoid breaking bisectability. 1- Remove IPI init code from irqchip/mips-gic 2- Implement the new irqchip->send_ipi() in irqchip/mips-gic 3- Select GENERIC_IRQ_IPI Kconfig symbol for MIPS_GIC 4- Change MIPS SMP to use the generic IPI implementation Only the SMP variants that use GIC were converted as it's the only irqchip that will have the support for generic IPI for now. Signed-off-by: Qais Yousef <qais.yousef@imgtec.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: <jason@lakedaemon.net> Cc: <marc.zyngier@arm.com> Cc: <jiang.liu@linux.intel.com> Cc: <linux-mips@linux-mips.org> Cc: <lisa.parratt@imgtec.com> Cc: Qais Yousef <qsyousef@gmail.com> Link: http://lkml.kernel.org/r/1449580830-23652-18-git-send-email-qais.yousef@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* irqchip/mips-gic: Add a IPI hierarchy domainQais Yousef2016-02-251-0/+1
| | | | | | | | | | | | | | | | | Add a new ipi domain on top of the normal domain. MIPS GIC now supports dynamic allocation of an IPI. Signed-off-by: Qais Yousef <qais.yousef@imgtec.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: <jason@lakedaemon.net> Cc: <marc.zyngier@arm.com> Cc: <jiang.liu@linux.intel.com> Cc: <linux-mips@linux-mips.org> Cc: <lisa.parratt@imgtec.com> Cc: Qais Yousef <qsyousef@gmail.com> Link: http://lkml.kernel.org/r/1449580830-23652-13-git-send-email-qais.yousef@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
OpenPOWER on IntegriCloud