summaryrefslogtreecommitdiffstats
path: root/drivers/firewire
Commit message (Collapse)AuthorAgeFilesLines
...
* firewire: ohci: flush AT contexts after bus reset - addendumStefan Richter2011-01-041-0/+7
| | | | | | | | | Add comments - on why bus_reset_tasklet flushes AT queues, - that commit 76f73ca1b291 can possibly be reverted now. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Jarod Wilson <jarod@redhat.com>
* firewire: ohci: flush AT contexts after bus reset for OHCI 1.2Clemens Ladisch2011-01-031-7/+39
| | | | | | | | | | The OHCI 1.2 (draft) specification, clause 7.2.3.3, allows and recommends that, after a bus reset, the controller does not flush all the packets in the AT queues. Therefore, the driver has to do this itself. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: net: set carrier state at ifupStefan Richter2010-12-191-15/+21
| | | | | | | | | | | | | | | | | | At ifup, carrier status would be shown on even if it actually was off. Also add an include for ethtool_ops rather than to rely on the one from netdevice.h. Note, we can alas not use fwnet_device_mutex to serialize access to dev->peer_count (as I originally wanted). This would cause a lock inversion: - fwnet_probe | takes fwnet_device_mutex + register_netdev | takes rtnl_mutex - devinet_ioctl | takes rtnl_mutex + fwnet_open | ...must not take fwnet_device_mutex Hence use the dev->lock spinlock for serialization. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: net: add carrier detectionMaxim Levitsky2010-12-191-0/+17
| | | | | | | | | To make userland, e.g. NetworkManager work with firewire, we need to detect whether cable is plugged or not. Simple and correct way of doing that is just counting number of peers. No peers - no link and vice versa. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: net: ratelimit error messagesMaxim Levitsky2010-12-131-4/+12
| | | | | | | | | | | | | | | | Unfortunately its easy to trigger such error messages by removing the cable while sending streams of data over the link. Such errors are normal, and therefore this patch stops firewire-net from flooding the kernel log with these errors, by combining series of same errors together. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> (Stefan R:) Eventually we should remove this logging when firewire-net and related firewire-ohci facilities have been stabilized. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: ohci: restart iso DMA contexts on resume from low power modeMaxim Levitsky2010-12-131-8/+46
| | | | | | | | Restore iso channels DMA so that iso channels could continue to work after resume from RAM/disk. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: ohci: restore GUID on resume.Maxim Levitsky2010-12-131-0/+7
| | | | | | | | | | Some lousy BIOSes, e.g. my Aspire 5720 BIOS forget to restore the GUID register on resume from RAM. Fix that by setting it to the last value that was read from it. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: ohci: use common buffer for self IDs and AR descriptorsClemens Ladisch2010-12-131-32/+34
| | | | | | | | | | | The buffers used for the selfIDs packets and the AR request and response descriptors end up using three pages because dma_alloc_coherent() allocates at least one page per call. However, these data structures would all fit into 4 KB, so we can save space by using a common buffer for them. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: ohci: optimize iso context checks in the interrupt handlerClemens Ladisch2010-12-131-13/+19
| | | | | | | | When the isochRx/isochTx bit is clear, we do not need to read the corresponding iso interrupt event register. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: make PHY packet header format consistentClemens Ladisch2010-12-134-29/+33
| | | | | | | | | | | Change the header of PHY packets to be sent to include a pseudo transaction code. This makes the header consistent with that of received PHY packets, and allows at_context_queue_packet() and log_ar_at_event() to see the packet type directly instead of having to deduce it from the header length or even from the header contents. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: ohci: properly clear posted write errorsClemens Ladisch2010-12-131-3/+12
| | | | | | | | | | | | | To remove the error information from the controller's queue and to allow more posted writes, the driver has to read the failed posted write address before clearing the postedWriteErr interrupt bit. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> (Stefan R:) The spec is somewhat fuzzy about the actual requirements. To err on the safe side, let's do these two read accesses. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: ohci: flush MMIO writes in the interrupt handlerClemens Ladisch2010-12-131-1/+2
| | | | | | | | Make sure that interrupt event clear bit writes are executed before the interrupt handler returns. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: ohci: fix AT context initialization error handlingClemens Ladisch2010-12-131-4/+10
| | | | | | | Add proper error handling for the context_init() calls. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: ohci: Asynchronous Reception rewriteClemens Ladisch2010-12-132-135/+278
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the AR DMA descriptors out of the buffer pages, and map the buffer pages linearly into the kernel's address space. This allows the driver to ignore any page boundaries in the DMA data and thus to avoid any copying around of packet payloads. This fixes the bug where S800 packets that are so big (> 4080 bytes) that they can be split over three pages were not handled correctly. Due to the changed algorithm, we can now use arbitrarily many buffer pages, which improves performance because the controller can more easily unload its DMA FIFO. Furthermore, using streaming DMA mappings should improve perfomance on architectures where coherent DMA mappings are not cacheable. Even on other architectures, the caching behaviour should be improved slightly because the CPU no longer writes to the buffer pages. v2: Detect the last filled buffer page by searching the descriptor's residual count value fields in order (like in the old code), instead of going backwards through the transfer status fields; it looks as if some controllers do not set the latter correctly. v3: Fix an old resume bug that would now make the handler run into a BUG_ON, and replace that check with more useful error handling. Increase the buffer size for better performance with non-TI chips. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Maxim Levitsky writes: Works almost perfectly. I can still see RCODE_BUSY errors sometimes, not very often though. 64K here eliminates these errors completely. This is most likely due to nouveau drivers and lowest perf level I use to lower card temperature. That increases latencies too much I think. Besides that the IO is just perfect. Tested-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: core: Update WARN usesJoe Perches2010-12-121-3/+3
| | | | | | | Add missing newlines. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: nosy: char device is not seekableStefan Richter2010-12-121-2/+1
| | | | | | | | | | Amend .open handler accordingly and remove the .llseek handler. .llseek = NULL means no_llseek (return error) since commit 776c163b1b93. The only client that uses this interface is nosy-dump in linux/tools/firewire and it knows not to seek in this char dev. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: ohci: fix regression with Agere FW643 rev 06, disable MSIStefan Richter2010-12-121-15/+33
| | | | | | | | | | | | | Agere FW643 rev 06, listed as "11c1:5901 (rev 06) (prog-if 10 [OHCI])", produced SBP-2 I/O errors since kernel 2.6.36. Disabling MSI fixes it. Since MSI work on Agere FW643-E (same vendor and device ID, but rev 07), introduce a device revision field into firewire-ohci's quirks list so that different quirks can be defined for older and newer revisions. Reported-by: Jonathan Isom <jeisom@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: <stable@kernel.org> # 2.6.36.y
* firewire: ohci: fix regression with VIA VT6315, disable MSIStefan Richter2010-12-121-1/+2
| | | | | | | | | | | "VIA Technologies, Inc. VT6315 Series Firewire Controller [1106:3403]" does not generate any interrupts if Message Signaled Interrupts were enabled. This is a regression since kernel 2.6.36 in which MSI support was added to firewire-ohci. Hence blacklist MSI on all VIA controllers. Reported-by: Robin Cook <rcook@wyrms.net> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: <stable@kernel.org> # 2.6.36.y
* Merge branch 'fwnet' of ↵Linus Torvalds2010-11-281-70/+90
|\ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'fwnet' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: net: throttle TX queue before running out of tlabels firewire: net: replace lists by counters firewire: net: fix memory leaks firewire: net: count stats.tx_packets and stats.tx_bytes
| * firewire: net: throttle TX queue before running out of tlabelsStefan Richter2010-11-171-24/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This prevents firewire-net from submitting write requests in fast succession until failure due to all 64 transaction labels were used up for unfinished split transactions. The netif_stop/wake_queue API is used for this purpose. Without this stop/wake mechanism, datagrams were simply lost whenever the tlabel pool was exhausted. Plus, tlabel exhaustion by firewire-net also prevented other unrelated outbound transactions to be initiated. The chosen queue depth was checked by me to hit the maximum possible throughput with an OS X peer whose receive DMA is good enough to never reject requests due to busy inbound request FIFO. Current Linux peers show a mixed picture of -5%...+15% change in bandwidth; their current bottleneck are RCODE_BUSY situations (fewer or more, depending on TX queue depth) due to too small AR buffer in firewire-ohci. Maxim Levitsky tested this change with similar watermarks with a Linux peer and some pending firewire-ohci improvements that address the RCODE_BUSY problem and confirmed that these TX queue limits are good. Note: This removes some netif_wake_queue from reception code paths. They were apparently copy&paste artefacts from a nonsensical netif_wake_queue use in the older eth1394 driver. This belongs only into the transmit path. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Tested-by: Maxim Levitsky <maximlevitsky@gmail.com>
| * firewire: net: replace lists by countersStefan Richter2010-11-171-47/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current transmit code does not at all make use of - fwnet_device.packet_list and only very limited use of - fwnet_device.broadcasted_list, - fwnet_device.queued_packets. Their current function is to track whether the TX soft-IRQ finished dealing with an skb when the AT-req tasklet takes over, and to discard pending tx datagrams (if there are any) when the local node is removed. The latter does actually contain a race condition bug with TX soft-IRQ and AT-req tasklet. Instead of these lists and the corresponding link in fwnet_packet_task, - a flag in fwnet_packet_task to track whether fwnet_tx is done, - a counter of queued datagrams in fwnet_device do the job as well. The above mentioned theoretic race condition is resolved by letting fwnet_remove sleep until all datagrams were flushed. It may sleep almost arbitrarily long since fwnet_remove is executed in the context of a multithreaded (concurrency managed) workqueue. The type of max_payload is changed to u16 here to avoid waste in struct fwnet_packet_task. This value cannot exceed 4096 per IEEE 1394:2008 table 16-18 (or 32678 per specification of packet headers, if there is ever going to be something else than beta mode). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * firewire: net: fix memory leaksStefan Richter2010-11-171-4/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | a) fwnet_transmit_packet_done used to poison ptask->pt_link by list_del. If fwnet_send_packet checked later whether it was responsible to clean up (in the border case that the TX soft IRQ was outpaced by the AT-req tasklet on another CPU), it missed this because ptask->pt_link was no longer shown as empty. b) If fwnet_write_complete got an rcode other than RCODE_COMPLETE, we missed to free the skb and ptask entirely. Also, count stats.tx_dropped and stats.tx_errors when rcode != 0. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * firewire: net: count stats.tx_packets and stats.tx_bytesStefan Richter2010-11-171-3/+6
| | | | | | | | Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | SCSI host lock push-downJeff Garzik2010-11-161-1/+3
|/ | | | | | | | | | | | | | | | | | | | | | | | | Move the mid-layer's ->queuecommand() invocation from being locked with the host lock to being unlocked to facilitate speeding up the critical path for drivers who don't need this lock taken anyway. The patch below presents a simple SCSI host lock push-down as an equivalent transformation. No locking or other behavior should change with this patch. All existing bugs and locking orders are preserved. Additionally, add one parameter to queuecommand, struct Scsi_Host * and remove one parameter from queuecommand, void (*done)(struct scsi_cmnd *) Scsi_Host* is a convenient pointer that most host drivers need anyway, and 'done' is redundant to struct scsi_cmnd->scsi_done. Minimal code disturbance was attempted with this change. Most drivers needed only two one-line modifications for their host lock push-down. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'fixes' of ↵Linus Torvalds2010-11-051-23/+65
|\ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: ohci: fix race when reading count in AR descriptor firewire: ohci: avoid reallocation of AR buffers firewire: ohci: fix race in AR split packet handling firewire: ohci: fix buffer overflow in AR split packet handling
| * firewire: ohci: fix race when reading count in AR descriptorClemens Ladisch2010-10-301-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | If the controller is storing a split packet and therefore changing d->res_count to zero between the two reads by the driver, we end up with an end pointer that is not at a packet boundary, and therefore overflow the buffer when handling the split packet. To fix this, read the field once, atomically. The compiler usually merges the two reads anyway, but for correctness, we have to enforce it. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Tested-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * firewire: ohci: avoid reallocation of AR buffersClemens Ladisch2010-10-301-12/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | Freeing an AR buffer page just to allocate a new page immediately afterwards is not only a pointless effort but also dangerous because the allocation can fail, which would result in an oops later. Split ar_context_add_page() into two functions so that we can reuse the old page directly. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Tested-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * firewire: ohci: fix race in AR split packet handlingClemens Ladisch2010-10-301-14/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When handling an AR buffer that has been completely filled, we assumed that its descriptor will not be read by the controller and can be overwritten. However, when the last received packet happens to end at the end of the buffer, the controller might not yet have moved on to the next buffer and might read the branch address later. If we overwrite and free the page before that, the DMA context will either go dead because of an invalid Z value, or go off into some random memory. To fix this, ensure that the descriptor does not get overwritten by using only the actual buffer instead of the entire page for reassembling the split packet. Furthermore, to avoid freeing the page too early, move on to the next buffer only when some data in it guarantees that the controller has moved on. This should eliminate the remaining firewire-net problems. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: 2.6.22-2.6.36 <stable@kernel.org> Tested-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * firewire: ohci: fix buffer overflow in AR split packet handlingClemens Ladisch2010-10-301-3/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the controller had to split a received asynchronous packet into two buffers, the driver tries to reassemble it by copying both parts into the first page. However, if size + rest > PAGE_SIZE, i.e., if the yet unhandled packets before the split packet, the split packet itself, and any received packets after the split packet are together larger than one page, then the memory after the first page would get overwritten. To fix this, do not try to copy the data of all unhandled packets at once, but copy the possibly needed data every time when handling a packet. This gets rid of most of the infamous crashes and data corruptions when using firewire-net. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: 2.6.22-2.6.36 <stable@kernel.org> Tested-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (cast PAGE_SIZE to size_t)
* | Merge branch 'ieee1394-removal' of ↵Linus Torvalds2010-10-253-5/+310
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'ieee1394-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: remove the old IEEE 1394 driver stack ieee1394: move init_ohci1394_dma to drivers/firewire/ Fix trivial change/delete conflict: drivers/ieee1394/eth1394.c is getting removed, but was modified by the networking merge.
| * | ieee1394: remove the old IEEE 1394 driver stackStefan Richter2010-10-111-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The drivers - ohci1394 (controller driver) - ieee1394 (core) - dv1394, raw1394, video1394 (userspace ABI) - eth1394, sbp2 (protocol drivers) are replaced by - firewire-ohci (controller driver) - firewire-core (core and userspace ABI) - firewire-net, firewire-sbp2 (protocol drivers) which are more featureful, better performing, and more secure than the older drivers; all with a smaller and more modern code base. The driver firedtv in drivers/media/dvb/firewire/ contains backends to both ieee1394 and firewire-core. Its ieee1394 backend code can be removed in an independent commit; firedtv as-is builds and works fine without ieee1394. The driver pcilynx (an incomplete controller driver) is deleted without replacement since PCILynx cards are extremely rare. Owners of these cards use them with the stand-alone bus sniffer driver nosy instead. The drivers nosy and init_ohci1394_dma which do not interact with either of the two IEEE 1394 stacks are not affected by the ieee1394 subsystem removal. There are still some issues with the newer firewire subsystem compared to the older one: - The rare and quirky controllers ALi M52xx, Apple UniNorth v1, NVIDIA NForce2 are even less well supported by firewire-ohci than by ohci1394. I am looking into the M52xx issue. - The experimental firewire-net is reportedly less stable than its experimental cousin eth1394. - Audio playback of a certain group of audio devices (ones based on DICE chipset with EAP; supported by prerelease FFADO code) does not work yet. This issue is still under investigation. - There were some ieee1394 based out-of-the-mainline drivers. Of them, only lisight, an audio driver for iSight webcams, seems still useful. Work is underway to reimplement it on top of firewire-core. All these remainig issues are minor; they should not stand in the way of overall better user experience of IEEE 1394 on Linux, together with a reduction in support efforts and maintenance burden. The coexistence of two IEEE 1394 kernel driver stacks in the mainline since 2.6.22 shall end now, as announced earlier this year. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * | ieee1394: move init_ohci1394_dma to drivers/firewire/Stefan Richter2010-10-112-0/+310
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | because drivers/ieee1394/ will be deleted. Additional changes: - add some #include directives - adjust to use firewire/ohci.h instead of ieee1394/ohci1394.h, replace struct ti_ohci by a minimal struct ohci, replace quadlet_t from ieee1394_types.h by u32 - two or three trivial stylistic changes - __iomem annotation Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds2010-10-231-13/+0
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1699 commits) bnx2/bnx2x: Unsupported Ethtool operations should return -EINVAL. vlan: Calling vlan_hwaccel_do_receive() is always valid. tproxy: use the interface primary IP address as a default value for --on-ip tproxy: added IPv6 support to the socket match cxgb3: function namespace cleanup tproxy: added IPv6 support to the TPROXY target tproxy: added IPv6 socket lookup function to nf_tproxy_core be2net: Changes to use only priority codes allowed by f/w tproxy: allow non-local binds of IPv6 sockets if IP_TRANSPARENT is enabled tproxy: added tproxy sockopt interface in the IPV6 layer tproxy: added udp6_lib_lookup function tproxy: added const specifiers to udp lookup functions tproxy: split off ipv6 defragmentation to a separate module l2tp: small cleanup nf_nat: restrict ICMP translation for embedded header can: mcp251x: fix generation of error frames can: mcp251x: fix endless loop in interrupt handler if CANINTF_MERRF is set can-raw: add msg_flags to distinguish local traffic 9p: client code cleanup rds: make local functions/variables static ... Fix up conflicts in net/core/dev.c, drivers/net/pcmcia/smc91c92_cs.c and drivers/net/wireless/ath/ath9k/debug.c as per David
| * \ \ Merge branch 'master' of ↵David S. Miller2010-10-212-26/+1
| |\ \ \ | | | |/ | | |/| | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/core/dev.c
| * | | Merge branch 'master' of ↵David S. Miller2010-10-061-0/+1
| |\ \ \ | | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/pcmcia/pcnet_cs.c net/caif/caif_socket.c
| * | | Merge branch 'master' of ↵David S. Miller2010-09-094-25/+49
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/mac80211/main.c
| * | | | ethtool: Provide a default implementation of ethtool_ops::get_drvinfoBen Hutchings2010-08-171-13/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver name and bus address for a net_device can normally be found through the driver model now. Instead of requiring drivers to provide this information redundantly through the ethtool_ops::get_drvinfo operation, use the driver model to do so if the driver does not define the operation. Since ETHTOOL_GDRVINFO no longer requires the driver to implement any operations, do not require net_device::ethtool_ops to be set either. Remove implementations of get_drvinfo and ethtool_ops that provide only this information. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | | Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds2010-10-221-0/+1
|\ \ \ \ \ | |_|_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default vfs: don't use BKL in default_llseek llseek: automatically add .llseek fop libfs: use generic_file_llseek for simple_attr mac80211: disallow seeks in minstrel debug code lirc: make chardev nonseekable viotape: use noop_llseek raw: use explicit llseek file operations ibmasmfs: use generic_file_llseek spufs: use llseek in all file operations arm/omap: use generic_file_llseek in iommu_debug lkdtm: use generic_file_llseek in debugfs net/wireless: use generic_file_llseek in debugfs drm: use noop_llseek
| * | | | llseek: automatically add .llseek fopArnd Bergmann2010-10-151-0/+1
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
* | | | firewire: ohci: fix TI TSB82AA2 regression since 2.6.35Stefan Richter2010-10-172-26/+1
| |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Revert commit 54672386ccf36ffa21d1de8e75624af83f9b0eeb "firewire: ohci: fix up configuration of TI chips". It caused massive slow-down and data corruption with a TSB82AA2 based StarTech EC1394B2 ExpressCard and FireWire 800 harddisks. https://bugs.launchpad.net/ubuntu/+source/linux/+bug/657081 http://thread.gmane.org/gmane.linux.kernel.firewire.user/4013 The fact that some card EEPROMs do not program these enhancements may be related to TSB81BA3 phy chip errata, if not to bugs of TSB82AA2 itself. We could re-add these configuration steps, but only conditional on a whitelist of cards on which these enhancements bring a proven positive effect. Reported-and-tested-by: Eric Shattow <lucent@gmail.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> 2.6.35 Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | | firewire: ohci: activate cycle timer register quirk on Ricoh chipsHeikki Lindholm2010-09-081-0/+1
|/ / | | | | | | | | | | | | | | | | | | | | | | | | The Ricoh FireWire controllers appear to have the non-atomic cycle timer register access bug, so, activate the driver workaround by default. The behaviour was observed on: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] and Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 04). Signed-off-by: Heikki Lindholm <holin@iki.fi> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | firewire: ohci: work around VIA and NEC PHY packet reception bugStefan Richter2010-08-291-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | VIA VT6306, VIA VT6308, and NEC OrangeLink controllers do not write packet event codes for received PHY packets (or perhaps write evt_no_status, hard to tell). Work around it by overwriting the packet's ACK by ack_complete, so that upper layers that listen to PHY packet reception get to see these packets. (Also tested: TI TSB82AA2, TI TSB43AB22/A, TI XIO2213A, Agere FW643, JMicron JMB381 --- these do not exhibit this bug.) Clemens proposed a quirks flag for that, IOW whitelist known misbehaving controllers for this workaround. Though to me it seems harmless enough to enable for all controllers. The log_ar_at_event() debug log will continue to show the original status from the DMA unit. Reported-by: Clemens Ladisch <clemens@ladisch.de> (VT6308) Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | firewire: core: do not use del_timer_sync() in interrupt contextClemens Ladisch2010-08-191-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | Because we might be in interrupt context, replace del_timer_sync() with del_timer(). If the timer is already running, we know that it will clean up the transaction, so we do not need to do any further processing in the normal transaction handler. Many thanks to Yong Zhang for diagnosing this. Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | firewire: net: fix unicast reception RCODE in failure pathsStefan Richter2010-08-191-13/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The incoming request hander fwnet_receive_packet() expects subsequent datagram handling code to return non-zero on errors. However, almost none of the failure paths did so. Fix them all. (This error reporting is used to send and RCODE_CONFLICT_ERROR to the sender node in such failure cases. Two modes of failure exist: Out of memory, or firewire-net is unaware of any peer node to which a fragment or an ARP packet belongs. However, it is unclear whether a sender can actually make use of such information. A Linux peer apparently can't. Maybe it should all be simplified to void functions.) Reported-by: Julia Lawall <julia@diku.dk> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | firewire: sbp2: fix stall with "Unsolicited response"Stefan Richter2010-08-191-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix I/O stalls with some 4-bay RAID enclosures which are based on OXUF936QSE: - Onnto dataTale RSM4QO, old firmware (not anymore with current firmware), - inXtron Hydra Super-S LCM, old as well as current firmware when used in RAID-5 mode, perhaps also in other RAID modes. The stalls happen during heavy or moderate disk traffic in periods that are a multiple of 5 minutes, roughly twice per hour. They are caused by the target responding too late to an ORB_Pointer register write: The target responds after Split_Timeout, hence firewire-core cancels the transaction, and firewire-sbp2 fails the SCSI request. The SCSI core retries the request, that fails again (and again), hence SCSI core calls firewire-sbp2's abort handler (and even the Management_Agent register write in the abort handler has the transaction timeout problem). During all that, the process which issued the I/O is stalled in I/O wait state. Meanwhile, the target actually acts on the first failed SCSI request: It responds to the ORB_Pointer write later (seen in the kernel log as "firewire_core: Unsolicited response") and also finishes the SCSI request with proper status (seen in the kernel log as "firewire_sbp2: status write for unknown orb"). So let's just ignore RCODE_CANCELLED in the transaction callback and wait for the target to complete the ORB nevertheless. This requires a small modification is sbp2_cancel_orbs(); it now needs to call orb->callback() regardless whether fw_cancel_transaction() found the transaction unfinished or finished. A different solution is to increase Split_Timeout on the local node. (Tested: 2000ms timeout; maybe 1000ms or something like that works too. 200ms is insufficient. Standard is 100ms.) However, I rather not do this because any software on any node could change the Split_Timeout to something unsuitable. Or such a large Split_Timeout may be undesirable for other purposes. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | firewire: sbp2: fix memory leak in sbp2_cancel_orbs or at send errorStefan Richter2010-08-191-5/+7
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When an ORB was canceled (Command ORB i.e. SCSI request timed out, or Management ORB timed out), or there was a send error in the initial transaction, we missed to drop one of the ORB's references and thus leaked memory. Background: In total, we hold 3 references to each Operation Request Block: - 1 during sbp2_scsi_queuecommand() or sbp2_send_management_orb() respectively, - 1 for the duration of the write transaction to the ORB_Pointer or Management_Agent register of the target, - 1 for as long as the ORB stays within the lu->orb_list, until the ORB is unlinked from the list and the orb->callback was executed. The latter one of these 3 references is finished - normally by sbp2_status_write() when the target wrote status for a pending ORB, - or by sbp2_cancel_orbs() in case of an ORB time-out, - or by complete_transaction() in case of a send error. Of them, the latter two lacked the kref_put. Add the missing kref_put()s. Add comments to the gets and puts of references for transaction callbacks and ORB callbacks so that it is easier to see what is supposed to happen. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
*-. Merge firewire branches to be released post v2.6.35Stefan Richter2010-08-0216-418/+2333
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/firewire/core-card.c drivers/firewire/core-cdev.c and forgotten #include <linux/time.h> in drivers/firewire/ohci.c Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| | * firewire: core: add forgotten dummy driver methods, remove unused onesStefan Richter2010-08-021-26/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is an at least theoretic race condition in which .start_iso etc. could still be called between when the dummy driver is bound to the card and when the children devices are being shut down. Add dummy_start_iso and friends. On the other hand, .enable, .set_config_rom, .read_csr, write_csr do not need to be implemented by the dummy driver, as commented. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| | * firewire: add isochronous multichannel receptionStefan Richter2010-07-294-97/+346
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the DMA context programming and userspace ABI for multichannel reception, i.e. for listening on multiple channel numbers by means of a single DMA context. The use case is reception of more streams than there are IR DMA units offered by the link layer. This is already implemented by the older ohci1394 + ieee1394 + raw1394 stack. And as discussed recently on linux1394-devel, this feature is occasionally used in practice. The big drawbacks of this mode are that buffer layout and interrupt generation necessarily differ from single-channel reception: Headers and trailers are not stripped from packets, packets are not aligned with buffer chunks, interrupts are per buffer chunk, not per packet. These drawbacks also cause a rather hefty code footprint to support this rarely used OHCI-1394 feature. (367 lines added, among them 94 lines of added userspace ABI documentation.) This implementation enforces that a multichannel reception context may only listen to channels to which no single-channel context on the same link layer is presently listening to. OHCI-1394 would allow to overlay single-channel contexts by the multi-channel context, but this would be a departure from the present first-come-first-served policy of IR context creation. The implementation is heavily based on an earlier one by Jay Fenlason. Thanks Jay. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| | * firewire: core: small clarifications in core-cdevStefan Richter2010-07-291-6/+6
| | | | | | | | | | | | | | | | | | | | | Make a note on the seemingly unused linux/sched.h. Rename an irritatingly named variable. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
OpenPOWER on IntegriCloud