summaryrefslogtreecommitdiffstats
path: root/drivers/edac/Kconfig
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'edac_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds2016-10-041-0/+42
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull EDAC updates from Borislav Petkov: "A lot of movement in the EDAC tree this time around, coarse summary below: - Altera Arria10 enablement of NAND, DMA, USB, QSPI and SD-MMC FIFO buffers (Thor Thayer) - split the memory controller part out of mpc85xx and share it with a new Freescale ARM Layerscape driver (York Sun) - amd64_edac fixes (Yazen Ghannam) - misc cleanups, refactoring and fixes all over the place" * tag 'edac_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (37 commits) EDAC, altera: Add IRQ Flags to disable IRQ while handling EDAC, altera: Correct EDAC IRQ error message EDAC, amd64: Autoload module using x86_cpu_id EDAC, sb_edac: Remove NULL pointer check on array pci_tad EDAC: Remove NO_IRQ from powerpc-only drivers EDAC, fsl_ddr: Fix error return code in fsl_mc_err_probe() EDAC, fsl_ddr: Add entry to MAINTAINERS EDAC: Move Doug Thompson to CREDITS EDAC, I3000: Orphan driver EDAC, fsl_ddr: Replace simple_strtoul() with kstrtoul() EDAC, layerscape: Add Layerscape EDAC support EDAC, fsl_ddr: Fix IRQ dispose warning when module is removed EDAC, fsl_ddr: Add support for little endian EDAC, fsl_ddr: Add missing DDR DRAM types EDAC, fsl_ddr: Rename macros and names EDAC, fsl-ddr: Separate FSL DDR driver from MPC85xx EDAC, mpc85xx: Replace printk() with pr_* format EDAC, mpc85xx: Drop setting/clearing RFXE bit in HID1 EDAC, altera: Rename MC trigger to common name EDAC, altera: Rename device trigger to common name ...
| * EDAC, layerscape: Add Layerscape EDAC supportYork Sun2016-09-011-0/+7
| | | | | | | | | | | | | | | | | | | | | | Add DDR EDAC driver for ARM-based compatible controllers. Both big-endian and little-endian are supported, as specified in device tree. Signed-off-by: York Sun <york.sun@nxp.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1471990465-27443-1-git-send-email-york.sun@nxp.com Signed-off-by: Borislav Petkov <bp@suse.de>
| * EDAC, altera: Add Arria10 SD-MMC EDAC supportThor Thayer2016-08-101-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | Add Altera Arria10 SD-MMC FIFO memory EDAC support. The SD-MMC is a dual port RAM implementation which is different than any of the other peripherals and therefore requires additional code. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: dinguyen@opensource.altera.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1470753653-23465-3-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
| * EDAC, altera: Add Arria10 QSPI supportThor Thayer2016-08-081-0/+7
| | | | | | | | | | | | | | | | | | | | | | Add Altera Arria10 QSPI FIFO memory support. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: dinguyen@opensource.altera.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1468512408-5156-9-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
| * EDAC, altera: Add Arria10 USB supportThor Thayer2016-08-081-0/+7
| | | | | | | | | | | | | | | | | | | | | | Add Altera Arria10 USB FIFO memory support. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: dinguyen@opensource.altera.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1468512408-5156-8-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
| * EDAC, altera: Add Arria10 DMA supportThor Thayer2016-08-081-0/+7
| | | | | | | | | | | | | | | | | | | | | | Add Altera Arria10 DMA FIFO memory support. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: dinguyen@opensource.altera.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1468512408-5156-7-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
| * EDAC, altera: Add Arria10 NAND supportThor Thayer2016-08-081-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | Add Altera Arria10 NAND FIFO memory support. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: dinguyen@opensource.altera.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1468512408-5156-6-git-send-email-tthayer@opensource.altera.com [ Reformat loop in altr_edac_a10_probe() for better readability. ] Signed-off-by: Borislav Petkov <bp@suse.de>
* | EDAC, skx_edac: Add EDAC driver for SkylakeTony Luck2016-08-211-0/+8
|/ | | | | | | | | | | | | | | | | | | This is an entirely new driver instead of yet another set of patches to sb_edac.c because: 1) Mapping from PCI devices to socket/memory controller is significantly different. Skylake scatters devices on a socket across a number of PCI buses. 2) There is an extra level of interleaving via the "mcroute" register that would be a little messy to squeeze into the old driver. 3) Validation is getting too expensive. Changes to sb_edac need to be checked against Sandy Bridge, Ivy Bridge, Haswell, Broadwell and Knights Landing. Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* EDAC, altera: Add Arria10 Ethernet EDAC supportThor Thayer2016-06-251-0/+7
| | | | | | | | | | | Add Altera Arria10 Ethernet FIFO memory EDAC support. Update to support a common compatibility string for all Ethernet FIFOs in the DT. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1466603939-7526-8-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
* EDAC, altera: Make L2C depend on L2x0 cache controllerThor Thayer2016-03-291-3/+2
| | | | | | | | | | | | | Make L2 cache depend instead of forcibly select the L2 cache support. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: devicetree@vger.kernel.org Cc: dinguyen@opensource.altera.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux@arm.linux.org.uk Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1458576106-24505-2-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
* EDAC, altera: Add Altera L2 cache and OCRAM supportThor Thayer2016-02-111-5/+21
| | | | | | | | | | | | | | | | | | | | | | | | Add L2 Cache and On-Chip RAM EDAC support for the Altera SoCs. The SDRAM controller is using the Memory Controller model. Each type of ECC is individually configurable. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: devicetree@vger.kernel.org Cc: dinguyen@opensource.altera.com Cc: galak@codeaurora.org Cc: grant.likely@linaro.org Cc: ijc+devicetree@hellion.org.uk Cc: linux-arm-kernel@lists.infradead.org Cc: linux@arm.linux.org.uk Cc: linux-doc@vger.kernel.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: mark.rutland@arm.com Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: pawel.moll@arm.com Cc: robh+dt@kernel.org Link: http://lkml.kernel.org/r/1455132384-17108-1-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
* x86/ras: Move AMD MCE injector to arch/x86/ras/Borislav Petkov2015-08-131-10/+0
| | | | | | | | | | | | | | This is an x86-specific module and would benefit from being closer to the arch code. Move it there. Update copyright while at it. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/1439396985-12812-14-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
* EDAC, mpc8xxx: Adapt for FSL SoCYork Sun2015-05-311-2/+2
| | | | | | | | | | | Remove mpc83xx and mpc85xx as dependency. Signed-off-by: York Sun <yorksun@freescale.com> Acked-by: Johannes Thumshirn <morbidrsa@gmail.com> Cc: Mingkai.hu@freescale.com Link: http://lkml.kernel.org/r/1431425022-44766-1-git-send-email-Wenbin.Song@freescale.com Signed-off-by: songwenbin <wenbin.song@freescale.com> Signed-off-by: Borislav Petkov <bp@suse.de>
* EDAC: Add APM X-Gene SoC EDAC driverLoc Ho2015-05-291-0/+7
| | | | | | | | | | | | | | | | | | | Add support for the APM X-Gene SoC EDAC driver. Signed-off-by: Loc Ho <lho@apm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: devicetree@vger.kernel.org Cc: dougthompson@xmission.com Cc: ijc+devicetree@hellion.org.uk Cc: jcm@redhat.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: mark.rutland@arm.com Cc: mchehab@osg.samsung.com Cc: patches@apm.com Cc: robh+dt@kernel.org Link: http://lkml.kernel.org/r/1432337580-3750-5-git-send-email-lho@apm.com Signed-off-by: Borislav Petkov <bp@suse.de>
* EDAC: Cleanup atomic_scrub messBorislav Petkov2015-05-281-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So first of all, this atomic_scrub() function's naming is bad. It looks like an atomic_t helper. Change it to edac_atomic_scrub(). The bigger problem is that this function is arch-specific and every new arch which doesn't necessarily need that functionality still needs to define it, otherwise EDAC doesn't compile. So instead of doing that and including arch-specific headers, have each arch define an EDAC_ATOMIC_SCRUB symbol which can be used in edac_mc.c for ifdeffery. Much cleaner. And we already are doing this with another symbol - EDAC_SUPPORT. This is also much cleaner than having CONFIG_EDAC enumerate all the arches which need/have EDAC support and drivers. This way I can kill the useless edac.h header in tile too. Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Chris Metcalf <cmetcalf@ezchip.com> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Doug Thompson <dougthompson@xmission.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linuxppc-dev@lists.ozlabs.org Cc: "Maciej W. Rozycki" <macro@codesourcery.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Paul Mackerras <paulus@samba.org> Cc: "Steven J. Hill" <Steven.Hill@imgtec.com> Cc: x86@kernel.org Signed-off-by: Borislav Petkov <bp@suse.de>
* EDAC, altera: Do not build it as a moduleThor Thayer2015-05-031-2/+2
| | | | | | | | | | | | The SDRAM EDAC requires SDRAM configuration/initialization before SDRAM is accessed (in the preloader) and therefore before Linux is loaded. Having a module compile is not desired so force to be built into kernel. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: mchehab@osg.samsung.com Cc: Takashi Iwai <tiwai@suse.de> Link: http://lkml.kernel.org/r/1429308974-26380-3-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
* EDAC, synps: Add EDAC support for zynq ddr ecc controllerPunnaiah Choudary Kalluri2015-01-071-0/+7
| | | | | | | | | | | | | | | | | | | | | | Add EDAC support for ecc errors reporting on the synopsys ddr controller. The ddr ecc controller corrects single bit errors and detects double bit errors. Selected important-ish notes from the changelog: - I have not taken care of spliting synps_edac_geterror_info function as it adds additional indentation levels and moreover the existing changes were made as part of the v2 review comments - Removed dt binding info as already there is a binding info available under memorycontroller. so, updated ecc info there. - Shortened the prefix "sysnopsys" to "synps" Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com> Link: http://lkml.kernel.org/r/a728a8d4678f4dbf9de189a480297c3d@BY2FFO11FD034.protection.gbl [ Boris: massage commit message. ] Signed-off-by: Borislav Petkov <bp@suse.de>
* EDAC, mce_amd_inj: Convert mce_amd_inj module to debugfsBorislav Petkov2014-11-251-5/+5
| | | | | | This module's interface belongs in debugfs, not in sysfs. Signed-off-by: Borislav Petkov <bp@suse.de>
* amd64_edac: Build module on x86-32Tomasz Pala2014-11-051-3/+3
| | | | | | | | | | | | By popular demand, enable amd64_edac on 32-bit too. Boris: - update Kconfig text. - add a warning on load which states that 32-bit configurations are unsupported. Signed-off-by: Tomasz Pala <gotar@polanet.pl> Link: http://lkml.kernel.org/r/20141102102212.GA7034@polanet.pl Signed-off-by: Borislav Petkov <bp@suse.de>
* edac: altera: Add Altera SDRAM EDAC supportThor Thayer2014-09-041-0/+9
| | | | | | | | | | | | | | | | | | | This patch adds support for the CycloneV and ArriaV SDRAM controllers. Correction and reporting of SBEs, Panic on DBEs. There was a discussion thread on whether this driver should be an mfd driver or just make use of syscon, which is already a mfd. Ultimately, the decision to use a simple syscon interface was reached.[1] [1] https://lkml.org/lkml/2014/7/30/514 [dinguyen] Fixed Kconfig to have EDAC_ALTERA_MC as a tristate to prevent a build failure for allmodconfig. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Acked-by: Borislav Petkov <bp@suse.de> [dinguyen] cleaned up commit message Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* Merge branch 'linux_next' of ↵Linus Torvalds2014-08-151-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac Pull EDAC updates from Mauro Carvalho Chehab. * 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: sb_edac: add support for Haswell based systems sb_edac: Fix mix tab/spaces alignments edac: add DDR4 and RDDR4 sb_edac: remove bogus assumption on mc ordering sb_edac: make minimal use of channel_mask sb_edac: fix socket detection on Ivy Bridge controllers sb_edac: update Kconfig description sb_edac: search devices using product id sb_edac: make RIR limit retrieval per model sb_edac: make node id retrieval per model sb_edac: make memory type detection per memory controller
| * sb_edac: add support for Haswell based systemsAristeu Rozanski2014-06-261-2/+2
| | | | | | | | | | | | | | | | | | | | Haswell memory controllers are very similar to Ivy Bridge and Sandy Bridge ones. This patch adds support to Haswell based systems. [m.chehab@samsung.com: Fix CodingStyle issues] Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
| * sb_edac: update Kconfig descriptionAristeu Rozanski2014-06-261-2/+2
| | | | | | | | | | | | | | | | Kconfig wasn't updated when Ivy Bridge support was added. Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
* | Merge branch 'x86-ras-for-linus' of ↵Linus Torvalds2014-08-041-0/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS updates from Ingo Molnar: "The main changes in this cycle are: - RAS tracing/events infrastructure, by Gong Chen. - Various generalizations of the APEI code to make it available to non-x86 architectures, by Tomasz Nowicki" * 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ras: Fix build warnings in <linux/aer.h> acpi, apei, ghes: Factor out ioremap virtual memory for IRQ and NMI context. acpi, apei, ghes: Make NMI error notification to be GHES architecture extension. apei, mce: Factor out APEI architecture specific MCE calls. RAS, extlog: Adjust init flow trace, eMCA: Add a knob to adjust where to save event log trace, RAS: Add eMCA trace event interface RAS, debugfs: Add debugfs interface for RAS subsystem CPER: Adjust code flow of some functions x86, MCE: Robustify mcheck_init_device trace, AER: Move trace into unified interface trace, RAS: Add basic RAS trace event x86, MCE: Kill CPU_POST_DEAD
| * | trace, RAS: Add basic RAS trace eventChen, Gong2014-06-231-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | To avoid confuision and conflict of usage for RAS related trace event, add an unified RAS trace event stub. Start a RAS subsystem menu which will be fleshed out in time, when more features get added to it. Signed-off-by: Chen, Gong <gong.chen@linux.intel.com> Link: http://lkml.kernel.org/r/1402475691-30045-2-git-send-email-gong.chen@linux.intel.com Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com>
* | ie31200_edac: Introduce the driverJason Baron2014-07-041-0/+7
|/ | | | | | | | | | | | | | | | | | | | | | Add a driver for the E3-1200 series of Intel DRAM controllers, based on the following E3-1200 specs: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e3-1200-family-vol-2-datasheet.html http://www.intel.com/content/www/us/en/processors/xeon/xeon-e3-1200v3-vol-2-datasheet.html I've tested this on bad memory hardware, and observed correlating bad reads and uncorrected memory errors as reported by the driver. Tested against: CPU E3-1270 v3 @ 3.50GHz : 8086:0c08 (haswell) CPU E3-1270 V2 @ 3.50GHz : 8086:0158 (ivy bridge) CPU E31270 @ 3.40GHz : 8086:0108 (sandy bridge) Signed-off-by: Jason Baron <jbaron@akamai.com> Link: http://lkml.kernel.org/r/95c83e80dd40b5377e8bb206285c5d95ac623872.1403818526.git.jbaron@akamai.com [ Boris: realign defines ] Signed-off-by: Borislav Petkov <bp@suse.de>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2013-07-131-3/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: "MIPS updates: - All the things that didn't make 3.10. - Removes the Windriver PPMC platform. Nobody will miss it. - Remove a workaround from kernel/irq/irqdomain.c which was there exclusivly for MIPS. Patch by Grant Likely. - More small improvments for the SEAD 3 platform - Improvments on the BMIPS / SMP support for the BCM63xx series. - Various cleanups of dead leftovers. - Platform support for the Cavium Octeon-based EdgeRouter Lite. Two large KVM patchsets didn't make it for this pull request because their respective authors are vacationing" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (124 commits) MIPS: Kconfig: Add missing MODULES dependency to VPE_LOADER MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functions MIPS: SEAD3: Disable L2 cache on SEAD-3. MIPS: BCM63xx: Enable second core SMP on BCM6328 if available MIPS: BCM63xx: Add SMP support to prom.c MIPS: define write{b,w,l,q}_relaxed MIPS: Expose missing pci_io{map,unmap} declarations MIPS: Malta: Update GCMP detection. Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET" MIPS: APSP: Remove <asm/kspd.h> SSB: Kconfig: Amend SSB_EMBEDDED dependencies MIPS: microMIPS: Fix improper definition of ISA exception bit. MIPS: Don't try to decode microMIPS branch instructions where they cannot exist. MIPS: Declare emulate_load_store_microMIPS as a static function. MIPS: Fix typos and cleanup comment MIPS: Cleanup indentation and whitespace MIPS: BMIPS: support booting from physical CPU other than 0 MIPS: Only set cpu_has_mmips if SYS_SUPPORTS_MICROMIPS MIPS: GIC: Fix gic_set_affinity infinite loop MIPS: Don't save/restore OCTEON wide multiplier state on syscalls. ...
| * MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOCDavid Daney2013-06-101-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CAVIUM_OCTEON_SOC most place we used to use CPU_CAVIUM_OCTEON. This allows us to CPU_CAVIUM_OCTEON in places where we have no OCTEON SOC. Remove CAVIUM_OCTEON_SIMULATOR as it doesn't really do anything, we can get the same configuration with CAVIUM_OCTEON_SOC. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-ide@vger.kernel.org Cc: linux-edac@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: netdev@vger.kernel.org Cc: spi-devel-general@lists.sourceforge.net Cc: devel@driverdev.osuosl.org Cc: linux-usb@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Patchwork: https://patchwork.linux-mips.org/patch/5295/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | Finally eradicate CONFIG_HOTPLUGStephen Rothwell2013-06-031-1/+1
|/ | | | | | | | | | | | | | | | | | | Ever since commit 45f035ab9b8f ("CONFIG_HOTPLUG should be always on"), it has been basically impossible to build a kernel with CONFIG_HOTPLUG turned off. Remove all the remaining references to it. Cc: Russell King <linux@arm.linux.org.uk> Cc: Doug Thompson <dougthompson@xmission.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge branch 'linux_next' of ↵Linus Torvalds2013-02-281-0/+23
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac Pull EDAC fixes and ghes-edac from Mauro Carvalho Chehab: "For: - Some fixes at edac drivers (i7core_edac, sb_edac, i3200_edac); - error injection support for i5100, when EDAC debug is enabled; - fix edac when it is loaded builtin (early init for the subsystem); - a "Firmware First" EDAC driver, allowing ghes to report errors via EDAC (ghes-edac). With regards to ghes-edac, this fixes a longstanding BZ at Red Hat that happens with Nehalem and Sandy Bridge CPUs: when both GHES and i7core_edac or sb_edac are running, the error reports are unpredictable, as both BIOS and OS race to access the registers. With ghes-edac, the EDAC core will refuse to register any other concurrent memory error driver. This patchset moves the ghes struct definitions to a separate header file (include/acpi/ghes.h) and adds 3 hooks at apei/ghes.c to register/unregister and to report errors via ghes-edac. Those changes were acked by ghes driver maintainer (Huang)." * 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (30 commits) i5100_edac: convert to use simple_open() ghes_edac: fix to use list_for_each_entry_safe() when delete list items ghes_edac: Fix RAS tracing ghes_edac: Make it compliant with UEFI spec 2.3.1 ghes_edac: Improve driver's printk messages ghes_edac: Don't credit the same memory dimm twice ghes_edac: do a better job of filling EDAC DIMM info ghes_edac: add support for reporting errors via EDAC ghes_edac: Register at EDAC core the BIOS report ghes: add the needed hooks for EDAC error report ghes: move structures/enum to a header file edac: add support for error type "Info" edac: add support for raw error reports edac: reduce stack pressure by using a pre-allocated buffer edac: lock module owner to avoid error report conflicts edac: remove proc_name from mci structure edac: add a new memory layer type edac: initialize the core earlier edac: better report error conditions in debug mode i5100_edac: Remove two checkpatch warnings ...
| * ghes_edac: Register at EDAC core the BIOS reportMauro Carvalho Chehab2013-02-251-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Register GHES at EDAC MC core, in order to avoid other drivers to also handle errors and mangle with error data. The edac core will warrant that just one driver will be used, so the first one to register (BIOS first) will be the one that will be reporting the hardware errors. For now, the EDAC driver does nothing but to register at the EDAC core, preventing the hardware-driven mechanism to interfere with GHES. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* | drivers/edac: remove depends on CONFIG_EXPERIMENTALKees Cook2013-01-171-2/+2
|/ | | | | | | | | | The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* EDAC: Fix EDAC Kconfig menuBorislav Petkov2013-01-071-5/+3
| | | | | | | | | | | | | | | | After f65aad41772f("MIPS: Cavium: Add EDAC support."), when entering the "Device Drivers" toplevel menu in menuconfig, the suboptions behind EDAC appeared merged with the rest of the device drivers types. This was because the menuconfig option EDAC is querying an EDAC_SUPPORT Kconfig bool which was defined after the menu definition. When pushing EDAC_SUPPORT up, before the menu definition, the variable is defined earlier and the above menuconfig artifact doesn't happen. Drop a useless menuconfig comment while at it. Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Borislav Petkov <bp@alien8.de>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2012-12-141-1/+32
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: "The MIPS bits for 3.8. This also includes a bunch fixes that were sitting in the linux-mips.org git tree for a long time. This pull request contains updates to several OCTEON drivers and the board support code for BCM47XX, BCM63XX, XLP, XLR, XLS, lantiq, Loongson1B, updates to the SSB bus support, MIPS kexec code and adds support for kdump. When pulling this, there are two expected merge conflicts in include/linux/bcma/bcma_driver_chipcommon.h which are trivial to resolve, just remove the conflict markers and keep both alternatives." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (90 commits) MIPS: PMC-Sierra Yosemite: Remove support. VIDEO: Newport Fix console crashes MIPS: wrppmc: Fix build of PCI code. MIPS: IP22/IP28: Fix build of EISA code. MIPS: RB532: Fix build of prom code. MIPS: PowerTV: Fix build. MIPS: IP27: Correct fucked grammar in ops-bridge.c MIPS: Highmem: Fix build error if CONFIG_DEBUG_HIGHMEM is disabled MIPS: Fix potencial corruption MIPS: Fix for warning from FPU emulation code MIPS: Handle COP3 Unusable exception as COP1X for FP emulation MIPS: Fix poweroff failure when HOTPLUG_CPU configured. MIPS: MT: Fix build with CONFIG_UIDGID_STRICT_TYPE_CHECKS=y MIPS: Remove unused smvp.h MIPS/EDAC: Improve OCTEON EDAC support. MIPS: OCTEON: Add definitions for OCTEON memory contoller registers. MIPS: OCTEON: Add OCTEON family definitions to octeon-model.h ata: pata_octeon_cf: Use correct byte order for DMA in when built little-endian. MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree. MIPS: Remove usage of CEVT_R4K_LIB config option. ...
| * MIPS: Cavium: Add EDAC support.Ralf Baechle2012-12-121-1/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Drivers for EDAC on Cavium. Supported subsystems are: o CPU primary caches. These are parity protected only, so only error reporting. o Second level cache - ECC protected, provides SECDED. o Memory: ECC / SECDEC if used with suitable DRAM modules. The driver will will only initialize if ECC is enabled on a system so is safe to run on non-ECC memory. o PCI: Parity error reporting Since it is very hard to test this sort of code the implementation is very conservative and uses polling where possible for now. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
* | EDAC: Boundary-check edac_debug_levelBorislav Petkov2012-11-281-4/+4
|/ | | | | | | | Only levels [0:4] are allowed so enforce that. Also, while at it, massage Kconfig text and add valid debug levels range to the module parameter description. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
* edac: add support for Calxeda highbank L2 cache eccRob Herring2012-06-271-0/+7
| | | | | | | Add support for L2 ECC on Calxeda highbank platform. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* edac: add support for Calxeda highbank memory controllerRob Herring2012-06-271-1/+8
| | | | | | | | | Add support for memory controller on Calxeda Highbank platforms. Highbank platforms support a single 4GB mini-DIMM with 1-bit correction and 2-bit detection. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* edac: add a new per-dimm API and make the old per-virtual-rank API obsoleteMauro Carvalho Chehab2012-06-111-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The old EDAC API is broken. It only works fine for systems manufatured before 2005 and for AMD 64. The reason is that it forces all memory controller drivers to discover rank info. Also, it doesn't allow grouping the several ranks into a DIMM. So, what almost all modern drivers do is to create a fake virtual-rank information, and use it to cheat the EDAC core to accept the driver. While this works if the user has enough time to discover what DIMM slot corresponds to each "virtual-rank" information, it prevents EDAC usage for users with less available time. It also makes life hard for vendors that may want to provide a table with their motherboards to the userspace tool (edac-utils) as each driver has its own logic for the virtual mapping. So, the old API should be removed, in favor of a more flexible API that allows newer drivers to not lie to the EDAC core. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Josh Boyer <jwboyer@redhat.com> Cc: Hui Wang <jason77.wang@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* edac: sb_edac: Let the driver depend on PCI_MMCONFIGHui Wang2012-03-211-2/+2
| | | | | | | | | | | This driver needs to access PCIe Extended Configuration Space Registers (0x100~0xfff), to correctly access those registers, we need to enable PCI_MMCONFIG option. Since this option is not enabled for X86_64 by default, we let the driver depend on it to prevent users forgetting to enable this option. Signed-off-by: Hui Wang <jason77.wang@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* Fix sb_edac compilation with 32 bits kernelsMauro Carvalho Chehab2012-03-211-1/+1
| | | | | | | | | | | | | | | | As reported by Josh Boyer <jwboyer@redhat.com>: > drivers/edac/sb_edac.c: In function 'get_memory_error_data': > drivers/edac/sb_edac.c:861:2: warning: left shift count >= width of type > [enabled by default] > <snip> > ERROR: "__udivdi3" [drivers/edac/sb_edac.ko] undefined! > make[1]: *** [__modpost] Error 1 > make: *** [modules] Error 2 PS.: compile-tested only Reported-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* edac: Only build sb_edac on 64-bitJosh Boyer2011-11-031-1/+1
| | | | | | | | | | The sb_edac driver is marginally useful on a 32-bit kernel, and currently has 64-bit divide compile errors when building that config. For now, make this build on only for 64-bit kernels. Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* edac: tag sb_edac as EXPERIMENTAL, as it requires more testingMauro Carvalho Chehab2011-11-011-0/+1
| | | | Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* edac: sb_edac: Add it to the building systemMauro Carvalho Chehab2011-11-011-0/+7
| | | | | | | Some changes on it were required due to changeset cd90cc84c6bf0, that changed the glue with the MCE logic. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* EDAC: Correct Kconfig dependenciesBorislav Petkov2011-11-011-3/+2
| | | | | | | | | | | Both AMD and Intel i7 EDAC drivers use MCE features and are thus dependent of this functionality present in the kernel. Express this in Kconfig so that randconfig builds don't break. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* i7core_edac: Drop the edac_mce facilityBorislav Petkov2011-11-011-3/+0
| | | | | | | | Remove edac_mce pieces and use the normal MCE decoder notifier chain by retaining the same functionality with considerably less code. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* Revert "EDAC: Correct Kconfig dependencies"Linus Torvalds2011-08-111-2/+3
| | | | | | | | | | | | | This reverts commit af9d220bac41dc3201893e1601cc7c44f7da4498. It turns out that one was meant to be applied on top of the edac.git tree in -next that has more i7core_edac changes, but that wasn't clear in the original email. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* EDAC: Correct Kconfig dependenciesBorislav Petkov2011-08-101-3/+2
| | | | | | | | | | | Both AMD and Intel i7 EDAC drivers use MCE features and are thus dependent of this functionality present in the kernel. Express this in Kconfig so that randconfig builds don't break. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Fix common misspellingsLucas De Marchi2011-03-311-1/+1
| | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* drivers/edac: provide support for tile architectureChris Metcalf2011-03-101-1/+9
| | | | | | | | Add tile support for the EDAC driver, which provides unified system error (memory, PCI, etc.) reporting. For now, the TILEPro port reports memory correctable error (CE) only. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
OpenPOWER on IntegriCloud