summaryrefslogtreecommitdiffstats
path: root/drivers/bluetooth/btmrvl_main.c
Commit message (Collapse)AuthorAgeFilesLines
* Bluetooth: btmrvl: support SCO routing to host interfaceAmitkumar Karwar2015-02-141-0/+14
| | | | | | | | | A vendor specific command is sent to firmware during initialization to enable this feature. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: fix card reset and suspend race issueAmitkumar Karwar2015-01-081-3/+8
| | | | | | | | | | Sometimes suspend thread queues a command and wait for it's response, meanwhile WLAN driver power cycles the card which leads to crash. This patch makes sure that suspend thread is woken up in remove path. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: use msecs_to_jiffies within macro definitionAmitkumar Karwar2015-01-081-3/+3
| | | | | | | This change improves readability and fixes allignment problem. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: add surprise_removed flagAmitkumar Karwar2015-01-061-2/+7
| | | | | | | | | This flag will be set in unload path to make sure that we skip sending further commands, ignore interrupts and stop main thread when unload starts. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: error path handling in setup handlerAmitkumar Karwar2015-01-061-1/+4
| | | | | | | | | If module init command fails, FW might not be in good state. We will return from setup handler and skip downloading further commands. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: fix race issue while stopping main threadAmitkumar Karwar2015-01-061-0/+5
| | | | | | | | | | | | btmrvl_remove_card() calls kthread_stop() to stop the main thread, but kthread_should_stop() is checked when all the activities are done in the main thread before sleeping. We will have kthread_should_stop() check as soon as main thread is woken up. This fixes a crash issue caused due to an invalid memory access while unnecessarily processing interrupts after card removal. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl add firmware dump supportXinming Hu2014-12-031-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds firmware dump support for marvell bluetooth chipset. Currently only SD8897 is supported. This is implemented based on dev_coredump, a new mechnism introduced in kernel 3.18rc3 Firmware dump can be trigger by echo 1 > /sys/kernel/debug/bluetooth/hci*/config/fw_dump and when the dump operation is completed, data can be read by cat /sys/class/devcoredump/devcd*/data We have prepared following script to divide fw memory dump data into multiple files based on memory type. [root]# cat btmrvl_split_dump_data.sh #!/bin/bash # usage: ./btmrvl_split_dump_data.sh dump_data fw_dump_data=$1 mem_type="ITCM DTCM SQRAM APU CIU ICU MAC EXT7 EXT8 EXT9 EXT10 EXT11 EXT12 EXT13 EXTLAST" for name in ${mem_type[@]} do sed -n "/Start dump $name/,/End dump/p" $fw_dump_data > tmp.$name.log if [ ! -s tmp.$name.log ] then rm -rf tmp.$name.log else # Remove the describle info "Start dump" and "End dump" sed '1d' tmp.$name.log | sed '$d' > /data/$name.log if [ -s /data/$name.log ] then echo "generate /data/$name.log" else sed '1d' tmp.$name.log | sed '$d' > /var/$name.log echo "generate /var/$name.log" fi rm -rf tmp.$name.log fi done Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: remove extra newline characterAmitkumar Karwar2014-12-031-7/+7
| | | | | | | | | BT_INFO/BT_DBG etc. already takes care of adding a newline An extra newline character inside message is removed in this patch. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: update hs_state in interrupt handlerAmitkumar Karwar2014-11-191-0/+6
| | | | | | | | | | Host sleep status flag should be reset when there is an interrupt from device. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: add DT-bindings for gpio-gapAmitkumar Karwar2014-11-191-3/+9
| | | | | | | | | | This can be used to have GPIO host wakeup method suitable for the platform and configurable GAP for host sleep handshake. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: add DT bindings documentationAmitkumar Karwar2014-11-191-17/+14
| | | | | | | | | | | | Calibration data can be downloaded through device tree method. This patch adds the documentation. Also, instead of searching device tree node by name using of_find_node_by_name() API, let's use for_each_compatible_node(). Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Fix crash in the Marvell driver initialization codepathAnatol Pomozov2014-07-311-0/+5
| | | | | | | | | | | | | | | | btmrvl_add_card() function calls kthread_run that might return error (e.g. if current thread is killed). If one tries to use the error value as a pointer then invalid memory access oops happens. Check kthread_run() return value, if it is an error then release resources correctly. TEST=boot computer with BT modules enabled. I see the error message that BT device initialization failed. Now kernel does not crash. Hint: to enable BT run 'rmmod btmrvl_sdio; modprobe btmrvl_sdio' Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: add public address configuration supportAmitkumar Karwar2014-07-191-0/+24
| | | | | | | | | .set_bdaddr handler is implemented for public address configuration. A reboot restores the bdaddr to its original address. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: wait for HOST_SLEEP_ENABLE event in suspendChin-Ran Lo2014-07-031-1/+24
| | | | | | | | | | | | | | | | | After BT_CMD_HOST_SLEEP_ENABLE command finishes, driver should wait until getting BT_EVENT_HOST_SLEEP_ENABLE event to complete suspend procedure. Without this patch the suspend handler would return success earlier. By the time when the BT_EVENT_HOST_SLEEP_ENABLE event comes in the controller driver could have already turned off the bus clock. This causes kernel crash or system reboot eventually. Cc: <stable@vger.kernel.org> # 3.13+ Signed-off-by: Chin-Ran Lo <crlo@marvell.com> Signed-off-by: Jeff CF Chen <jeffc@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: indicate pscan scheduling instant in a debug eventBing Zhao2014-07-031-0/+19
| | | | | | | | | A vendor specific command is sent to firmware during initialization to enable this feature. This command is for SD8897 only. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: Fix btmrvl_send_module_cfg_cmd()Petri Gynther2014-04-241-1/+1
| | | | | | | | | Change subcmd parameter from int to u8 to match its use: btmrvl_send_sync_cmd(priv, BT_CMD_MODULE_CFG_REQ, &subcmd, 1); Signed-off-by: Petri Gynther <pgynther@google.com> Reviewed-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: btmrvl: implement read-to-clear for SD8897 interruptsBing Zhao2014-03-281-0/+17
| | | | | | | | | For SD8897, CMD52 write_to_clear may have missing interrupts under certain corner case condition. Use CMD53 read-to-clear to fix the problem. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: don't consume all vendor specific eventsAmitkumar Karwar2014-03-201-5/+6
| | | | | | | | | | | | | | | | If vendor specific HCI commands are received from application, we should send corresponding events to stack. These events should be consumed in driver, only if they are for the internal HCI commands generated by driver. This patch fixes the vendor command 0x3f stuck problem with above mentioned change. For example, hcitool cmd 3f 22 fe 06 22 21 20 43 50 00 Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: remove cal-data byte swapping and redundant mem copyBing Zhao2013-12-041-17/+10
| | | | | | | | | | | | | The device tree property can define the cal-data in proper order. There is no need to swap the bytes in driver. Also remove the redundant cal-data memory copy after removing the byte swapping. Cc: Mike Frysinger <vapier@chromium.org> Cc: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Hyuckjoo Lee <hyuckjoo.lee@samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: use cal-data from device-tree instead of conf fileBing Zhao2013-12-041-75/+17
| | | | | | | | | | | | | | | | | | | | | | | Some ARM versions of Chromebook need to download a new calibration data from host driver to firmware. They do have EEPROM but still need a piece of new calibration data in test mode. The cal-data is platform dependent. It's simpler and more feasible to use device tree based cal-data instead of configuration file based cal-data. This patch remove configuration file based cal-data downloading and replace it using cal-data from device tree. When CONFIG_OF is not selected, or the specific property is not present in the device tree, the calibration downloading will not happen. Cc: Mike Frysinger <vapier@chromium.org> Cc: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Hyuckjoo Lee <hyuckjoo.lee@samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: operate on 16-bit opcodes instead of ogf/ocfBing Zhao2013-12-041-12/+9
| | | | | | | | Replace ogf/ocf and its packing with 16-bit opcodes. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Remove pointless parameter check in btmrvl_send_frame()Marcel Holtmann2013-10-111-8/+1
| | | | | | | | The hdev parameter of btmrvl_send_frame() is always valid. If it were not valid, then it would have crashed earlier in the call chain. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: Add hdev parameter to hdev->send driver callbackMarcel Holtmann2013-10-111-3/+1
| | | | | | | | | | | | | | Instead of masking hdev inside the skb->dev parameter, hand it directly to the driver as a parameter to hdev->send. This makes the driver interface more clear and simpler. This patch fixes all drivers to accept and handle the new parameter of hdev->send callback. Special care has been taken for bpa10x and btusb drivers that require having skb->dev set to hdev for the URB transmit complete handlers. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: Remove unused btmrvl_ioctl() callbackMarcel Holtmann2013-10-101-10/+3
| | | | | | | The btmrvl_ioctl() function is not used and thus remove it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: btmrvl: add calibration data download supportAmitkumar Karwar2013-10-021-0/+116
| | | | | | | | | | | | | | | A text file containing calibration data in hex format can be provided at following path: /lib/firmware/mrvl/sd8797_caldata.conf The data will be downloaded to firmware during initialization. Reviewed-by: Mike Frysinger <vapier@chromium.org> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Hyuckjoo Lee <hyuckjoo.lee@samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: add setup handlerAmitkumar Karwar2013-10-021-2/+16
| | | | | | | | Move initialization code to hdev's setup handler. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: get rid of struct btmrvl_cmdAmitkumar Karwar2013-10-021-6/+6
| | | | | | | | | Replace this proprietary structure with the standard one (struct hci_command_hdr). Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: add btmrvl_send_sync_cmd() functionAmitkumar Karwar2013-10-021-88/+41
| | | | | | | | | | Command preparation code is used multiple times. This patch separate out this common code and create btmrvl_send_sync_cmd() function. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: fix thread stopping raceDaniel Drake2013-06-131-5/+4
| | | | | | | | | | | | | | | | | | | | There is currently a race condition in the btmrvl_remove_card() which is causing hangs on suspend for OLPC. When the race occurs, kthread_stop() never returns. The problem is that btmrvl_service_main_thread() calls kthread_should_stop() and then does a fair number of things before restarting the loop and sleeping. If the thread gets stopped after kthread_should_stop() is checked, but before the sleep happens, the thread will go to sleep and won't necessarily be woken up. Move the kthread_should_stop() check into a race-free place. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Bluetooth: btmrvl: trivial style fixesAndrei Emeltchenko2012-07-091-3/+5
| | | | | | | | | Patch shortens locals scope and adds missing braces. This is a diff between v1 which was applied and v2 of patch "Bluetooth: btmrvl: Do not send vendor events to bluetooth stack". Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
* Bluetooth: btmrvl: Do not send vendor events to bluetooth stackAndrei Emeltchenko2012-06-191-2/+12
| | | | | | | | Vendor-specific events shall be processed in driver and not sent to bluetooth stack where they screw up HCI command countings. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
* Bluetooth: btmrvl: add support for SDIO suspend/resume callbacksAmitkumar Karwar2012-05-091-1/+2
| | | | | | | | | | | Host sleep is activated using already configured host sleep parameters in suspend handler and it is cancelled in resume handler. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo@padovan.org>
* Bluetooth: btmrvl: configure default host sleep parametersAmitkumar Karwar2012-05-091-22/+31
| | | | | | | | | | | | | | | Currently debugfs commands "hscfgcmd" and "gpiogap" are provided for host sleep configuration. But if user doesn't configure host sleep parameters using these commands, host sleep activation is failed during suspend (support for suspend and resume handlers is added in next patch). Default host sleep configuration is done during driver initialisation in this patch. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Gustavo Padovan <gustavo@padovan.org>
* Bluetooth: Remove hci_dev->driver_dataDavid Herrmann2012-02-131-5/+6
| | | | | | | | | | The linux device model provides dev_set/get_drvdata so we can use this to save private driver data. This also removes several unnecessary casts. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: Remove HCI-owner fieldDavid Herrmann2012-02-131-1/+0
| | | | | | | | | | | | | | | After unregistering an hci_dev object a bluetooth driver does not have any callbacks in the hci_dev structure left over. Therefore, there is no need to keep a reference to the module. Previously, we needed this to protect the hci-destruct callback. However, this callback is no longer available so we do not need this owner field, anymore. Drivers now call hci_unregister_dev() and they are done with the object. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: btmrvl: Remove empty destruct cbDavid Herrmann2012-02-131-5/+0
| | | | | | | | | The callback is optional and we provide an empty callback so remove it entirely. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* freezer: don't unnecessarily set PF_NOFREEZE explicitlyTejun Heo2011-11-211-2/+0
| | | | | | | | | | | | | | | | | | | Some drivers set PF_NOFREEZE in their kthread functions which is completely unnecessary and racy - some part of freezer code doesn't consider cases where PF_NOFREEZE is set asynchronous to freezer operations. In general, there's no reason to allow setting PF_NOFREEZE explicitly. Remove them and change the documentation to note that setting PF_NOFREEZE directly isn't allowed. -v2: Dropped change to twl4030-irq.c as it no longer uses PF_NOFREEZE. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: "Gustavo F. Padovan" <padovan@profusion.mobi> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: wwang <wei_wang@realsil.com.cn>
* bluetooth: add module.h to drivers/bluetooth files as required.Paul Gortmaker2011-10-311-0/+2
| | | | Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* Bluetooth: HCI devices are either BR/EDR or AMP radiosDavid Vrabel2010-10-121-2/+2
| | | | | | | | | HCI transport drivers may not know what type of radio an AMP device has so only say whether they're BR/EDR or AMP devices. Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* Bluetooth: Process interrupt in main thread of btmrvl driver as wellAmitkumar Karwar2010-07-211-1/+4
| | | | | | | | | | | | | | | When driver is sending a command or data and the firmware is also sending a sleep event, sometimes it is observed that driver will continue to send the command/data to firmware right after processing sleep event. Once sleep event is processed driver is not supposed to send anything because firmware is in sleep state after that. Previously interrupt processing was done in SDIO interrupt callback handler. Now it is done in btmrvl driver main thread to solve the cross-sending properly. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Set hdev->dev_type based on Marvell device typeBing Zhao2010-05-101-0/+9
| | | | | | | Get the device type from MODULE_BRINGUP_REQ command response. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Separate btmrvl_register_hdev() from btmrvl_add_card()Bing Zhao2010-05-101-32/+43
| | | | | | | | Move btmrvl hdev registration code out of btmrvl_add_card(). New function btmrvl_register_hdev() is added. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Decode btmrvl MODULE_BRINGUP_REG response correctlyBing Zhao2010-05-101-2/+4
| | | | | | | | The MODULE_BRINGUP_REQ command response returns success with either 0x00 or 0x0c. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Fix storing negative values as unsigned charDan Carpenter2010-05-101-1/+1
| | | | | | | | | This is mostly cleanup. There is only one caller and it just checks for non-zero return values. Still "ret" should be int because we want to return -EINVAL on errors. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Convert controller hdev->type to hdev->busMarcel Holtmann2010-02-271-1/+1
| | | | | | | The hdev->type is misnamed and should be actually hdev->bus instead. So convert it now. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Enable auto sleep mode for btmrvl driverAmitkumar Karwar2009-12-031-22/+33
| | | | | | | | | The auto sleep mode for btmrvl driver is not enabled by default. This patch enables auto sleep mode when card is probed. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Remove Enter/Leave debug statements from Marvell driverMarcel Holtmann2009-08-221-96/+11
| | | | | | | | | The Marvell Bluetooth driver is full of Enter/Leave debug statements and all of them are really pointless and only clutter the code. Seems to be some left-overs when they ported the driver from Windows. For the Linux driver lets remove these. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Fix last few compiler warning within Marvell core driverMarcel Holtmann2009-08-221-4/+4
| | | | | | | After fixing the driver to use skb_put properly for their HCI commands only a few compiler warnings are left. Add proper casting for them. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Fix Marvell driver to use skb_put and hci_opcode_packMarcel Holtmann2009-08-221-14/+8
| | | | | | | | The Marvell driver has some weird quirks on how to construct proper SKBs with Bluetooth HCI commands. Fix it to use skb_put properly and also use hci_opcode_pack instead of self-crafted macro. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Fix module description strings for Marvell driverMarcel Holtmann2009-08-221-1/+1
| | | | | | | Make the module description entries for the core and also the Marvell SDIO driver match common practive inside the Bluetooth subsystem. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
OpenPOWER on IntegriCloud