summaryrefslogtreecommitdiffstats
path: root/drivers/bluetooth/btmrvl_drv.h
Commit message (Collapse)AuthorAgeFilesLines
* Bluetooth: btmrvl: don't send data to firmware while processing suspendChin-Ran Lo2016-01-061-0/+1
| | | | | | | | | | | | | | | | | | | | Usually when driver sends data to firmware it receives TX_DONE (DN_LD_HOST_INT_STATUS) interrupt from firmware right away. It's also observed that some times the fireware could delay sending DN_LD_HOST_INT_STATUS interrupt. If driver sends data to firmware during suspend processing and the TX_DONE interrupt is delayed, it may come back at wrong time when SDIO host driver is in the middle of suspending. Block any data from stack while suspending. Also skip sending data that are already in driver tx_queue. Don't purge the skb queue on suspend to avoid intermittent music after system resumes from S3. Signed-off-by: Chin-Ran Lo <crlo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: Coding style Fix for btmrvl headerPrasanna Karthik2015-07-271-3/+3
| | | | | | | | Fix for "Unnecessary space before function pointer arguments" reported by checkpatch. Signed-off-by: Prasanna Karthik <mkarthi3@visteon.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: btmrvl: support SCO routing to host interfaceAmitkumar Karwar2015-02-141-0/+1
| | | | | | | | | A vendor specific command is sent to firmware during initialization to enable this feature. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: use msecs_to_jiffies within macro definitionAmitkumar Karwar2015-01-081-2/+2
| | | | | | | This change improves readability and fixes allignment problem. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: add surprise_removed flagAmitkumar Karwar2015-01-061-0/+1
| | | | | | | | | This flag will be set in unload path to make sure that we skip sending further commands, ignore interrupts and stop main thread when unload starts. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl add firmware dump supportXinming Hu2014-12-031-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds firmware dump support for marvell bluetooth chipset. Currently only SD8897 is supported. This is implemented based on dev_coredump, a new mechnism introduced in kernel 3.18rc3 Firmware dump can be trigger by echo 1 > /sys/kernel/debug/bluetooth/hci*/config/fw_dump and when the dump operation is completed, data can be read by cat /sys/class/devcoredump/devcd*/data We have prepared following script to divide fw memory dump data into multiple files based on memory type. [root]# cat btmrvl_split_dump_data.sh #!/bin/bash # usage: ./btmrvl_split_dump_data.sh dump_data fw_dump_data=$1 mem_type="ITCM DTCM SQRAM APU CIU ICU MAC EXT7 EXT8 EXT9 EXT10 EXT11 EXT12 EXT13 EXTLAST" for name in ${mem_type[@]} do sed -n "/Start dump $name/,/End dump/p" $fw_dump_data > tmp.$name.log if [ ! -s tmp.$name.log ] then rm -rf tmp.$name.log else # Remove the describle info "Start dump" and "End dump" sed '1d' tmp.$name.log | sed '$d' > /data/$name.log if [ -s /data/$name.log ] then echo "generate /data/$name.log" else sed '1d' tmp.$name.log | sed '$d' > /var/$name.log echo "generate /var/$name.log" fi rm -rf tmp.$name.log fi done Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: add public address configuration supportAmitkumar Karwar2014-07-191-0/+1
| | | | | | | | | .set_bdaddr handler is implemented for public address configuration. A reboot restores the bdaddr to its original address. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Fix sparse warning with btmrvl driverJohan Hedberg2014-07-031-0/+1
| | | | | | | | | | This patch fixes the following sparse warning caused by a missing declaration in the header file: drivers/bluetooth/btmrvl_main.c:218:5: warning: symbol 'btmrvl_pscan_window_reporting' was not declared. Should it be static? Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: wait for HOST_SLEEP_ENABLE event in suspendChin-Ran Lo2014-07-031-0/+1
| | | | | | | | | | | | | | | | | After BT_CMD_HOST_SLEEP_ENABLE command finishes, driver should wait until getting BT_EVENT_HOST_SLEEP_ENABLE event to complete suspend procedure. Without this patch the suspend handler would return success earlier. By the time when the BT_EVENT_HOST_SLEEP_ENABLE event comes in the controller driver could have already turned off the bus clock. This causes kernel crash or system reboot eventually. Cc: <stable@vger.kernel.org> # 3.13+ Signed-off-by: Chin-Ran Lo <crlo@marvell.com> Signed-off-by: Jeff CF Chen <jeffc@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: indicate pscan scheduling instant in a debug eventBing Zhao2014-07-031-0/+1
| | | | | | | | | A vendor specific command is sent to firmware during initialization to enable this feature. This command is for SD8897 only. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: Fix btmrvl_send_module_cfg_cmd()Petri Gynther2014-04-241-1/+1
| | | | | | | | | Change subcmd parameter from int to u8 to match its use: btmrvl_send_sync_cmd(priv, BT_CMD_MODULE_CFG_REQ, &subcmd, 1); Signed-off-by: Petri Gynther <pgynther@google.com> Reviewed-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: btmrvl: implement read-to-clear for SD8897 interruptsBing Zhao2014-03-281-0/+2
| | | | | | | | | For SD8897, CMD52 write_to_clear may have missing interrupts under certain corner case condition. Use CMD53 read-to-clear to fix the problem. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: remove cal-data byte swapping and redundant mem copyBing Zhao2013-12-041-1/+1
| | | | | | | | | | | | | The device tree property can define the cal-data in proper order. There is no need to swap the bytes in driver. Also remove the redundant cal-data memory copy after removing the byte swapping. Cc: Mike Frysinger <vapier@chromium.org> Cc: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Hyuckjoo Lee <hyuckjoo.lee@samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: use cal-data from device-tree instead of conf fileBing Zhao2013-12-041-4/+0
| | | | | | | | | | | | | | | | | | | | | | | Some ARM versions of Chromebook need to download a new calibration data from host driver to firmware. They do have EEPROM but still need a piece of new calibration data in test mode. The cal-data is platform dependent. It's simpler and more feasible to use device tree based cal-data instead of configuration file based cal-data. This patch remove configuration file based cal-data downloading and replace it using cal-data from device tree. When CONFIG_OF is not selected, or the specific property is not present in the device tree, the calibration downloading will not happen. Cc: Mike Frysinger <vapier@chromium.org> Cc: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Hyuckjoo Lee <hyuckjoo.lee@samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: operate on 16-bit opcodes instead of ogf/ocfBing Zhao2013-12-041-8/+11
| | | | | | | | Replace ogf/ocf and its packing with 16-bit opcodes. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: add calibration data download supportAmitkumar Karwar2013-10-021-0/+8
| | | | | | | | | | | | | | | A text file containing calibration data in hex format can be provided at following path: /lib/firmware/mrvl/sd8797_caldata.conf The data will be downloaded to firmware during initialization. Reviewed-by: Mike Frysinger <vapier@chromium.org> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Hyuckjoo Lee <hyuckjoo.lee@samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: get rid of struct btmrvl_cmdAmitkumar Karwar2013-10-021-6/+0
| | | | | | | | | Replace this proprietary structure with the standard one (struct hci_command_hdr). Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: Do not send vendor events to bluetooth stackAndrei Emeltchenko2012-06-191-1/+1
| | | | | | | | Vendor-specific events shall be processed in driver and not sent to bluetooth stack where they screw up HCI command countings. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
* Bluetooth: btmrvl: add support for SDIO suspend/resume callbacksAmitkumar Karwar2012-05-091-0/+2
| | | | | | | | | | | Host sleep is activated using already configured host sleep parameters in suspend handler and it is cancelled in resume handler. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo@padovan.org>
* Bluetooth: btmrvl: configure default host sleep parametersAmitkumar Karwar2012-05-091-0/+1
| | | | | | | | | | | | | | | Currently debugfs commands "hscfgcmd" and "gpiogap" are provided for host sleep configuration. But if user doesn't configure host sleep parameters using these commands, host sleep activation is failed during suspend (support for suspend and resume handlers is added in next patch). Default host sleep configuration is done during driver initialisation in this patch. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Gustavo Padovan <gustavo@padovan.org>
* Bluetooth: Use __packed annotation for driversGustavo F. Padovan2010-07-211-2/+2
| | | | | | | Use the __packed annotation instead of the __attribute__((packed)). Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Process interrupt in main thread of btmrvl driver as wellAmitkumar Karwar2010-07-211-0/+1
| | | | | | | | | | | | | | | When driver is sending a command or data and the firmware is also sending a sleep event, sometimes it is observed that driver will continue to send the command/data to firmware right after processing sleep event. Once sleep event is processed driver is not supposed to send anything because firmware is in sleep state after that. Previously interrupt processing was done in SDIO interrupt callback handler. Now it is done in btmrvl driver main thread to solve the cross-sending properly. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Set hdev->dev_type based on Marvell device typeBing Zhao2010-05-101-0/+2
| | | | | | | Get the device type from MODULE_BRINGUP_REQ command response. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Separate btmrvl_register_hdev() from btmrvl_add_card()Bing Zhao2010-05-101-0/+1
| | | | | | | | Move btmrvl hdev registration code out of btmrvl_add_card(). New function btmrvl_register_hdev() is added. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Decode btmrvl MODULE_BRINGUP_REG response correctlyBing Zhao2010-05-101-1/+4
| | | | | | | | The MODULE_BRINGUP_REQ command response returns success with either 0x00 or 0x0c. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* Bluetooth: Enable auto sleep mode for btmrvl driverAmitkumar Karwar2009-12-031-0/+1
| | | | | | | | | The auto sleep mode for btmrvl driver is not enabled by default. This patch enables auto sleep mode when card is probed. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Remove private device name of Marvell SDIO driverMarcel Holtmann2009-08-221-2/+0
| | | | | | | | For some reason the btmrvl_device struct has a name field that the SDIO fills in, but then never ever uses again. That is totally pointless and so just remove it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Remove pointless ifdef protection for Marvell header filesMarcel Holtmann2009-08-221-5/+0
| | | | | | | | | Both header files of the Marvell Bluetooth driver are private anyway and if the driver happens to include them twice or they create a circular dependency then the driver needs fixing. So just remove both pointless ifdefs. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Add debugfs support to btmrvl driverBing Zhao2009-08-221-0/+8
| | | | | | | | | | | | | | /debug/btmrvl/config/ /debug/btmrvl/status/ See Documentation/btmrvl.txt for details. This patch incorporates a lot of comments given by Nicolas Pitre <nico@marvell.com>. Many thanks to Nicolas Pitre. Signed-off-by: Rahul Tank <rahult@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Add btmrvl driver for Marvell Bluetooth devicesBing Zhao2009-08-221-0/+138
This driver provides basic definitions and library functions to support Marvell Bluetooth enabled devices, such as 88W8688 WLAN/BT combo chip. This patch incorporates a lot of comments given by Nicolas Pitre <nico@marvell.com>. Many thanks to Nicolas Pitre. Signed-off-by: Rahul Tank <rahult@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
OpenPOWER on IntegriCloud