summaryrefslogtreecommitdiffstats
path: root/arch
Commit message (Collapse)AuthorAgeFilesLines
* [ARM] 3561/1: Poodle: Correct the MMC/SD power controlRichard Purdie2006-06-191-4/+18
| | | | | | | | | | Patch from Richard Purdie Correct the Poodle power control for the MMC/SD port. Also add write protection switch support. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3593/1: Add reboot and shutdown handlers for Zaurus handheldsRichard Purdie2006-06-195-26/+127
| | | | | | | | | | | Patch from Richard Purdie Add functionality to allow machine specific reboot handlers on ARM. Add machine specific reboot and poweroff handlers for all PXA Zaurus models. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3559/1: S3C2442: core and serial portBen Dooks2006-06-1813-220/+651
| | | | | | | | | | | Patch from Ben Dooks Core support for the Samsung S3C2442, and the serial port driver update to allow the serial port blocks to be used. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3557/1: S3C24XX: centralise and cleanup uart registrationBen Dooks2006-06-1815-185/+154
| | | | | | | | | | | | | Patch from Ben Dooks All the S3C24XX based devices currently have similar uart blocks, in the same location. Make the process of adding new uart blocks easier by commonising the device definitions and adding a new init function for the cpu code. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3558/1: SMDK24XX: LED platform devicesBen Dooks2006-06-181-0/+65
| | | | | | | | | Patch from Ben Dooks Platform devices for the LEDs on all the SMDK24XX boards Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3534/1: add spi support to lubbock platformDavid Brownell2006-06-181-0/+84
| | | | | | | | | | | | | | | | Patch from David Brownell This adds the platform device for SSP/SPI controller, and declares the ads7846 device hooked up to it. Not all Lubbock boards appear to populate the connector needed to use this instead of the ucb1400 chip, but it can always be used as a temperature sensor. In short, this is probably most useful as an example of how to provide the configuration data used by the pxa2xx_spi driver. (Last tested against a slightly earlier version of that driver.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3554/1: ARM: Fix dyntick lockingTony Lindgren2006-06-182-9/+19
| | | | | | | | | | Patch from Tony Lindgren This patch fixes some dyntick locking issues on ARM as pointed out by Russell King. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3553/1: S3C24XX: earlier print of cpu idcode infoBen Dooks2006-06-181-2/+2
| | | | | | | | | | | Patch from Ben Dooks Move the printk of the CPU information and IDCODE before the checking of the table entry validity to aide in debugging new cpu entries. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3551/1: S3C24XX: PM code failes to compile with CONFIG_DCACHE_WRITETHROUGHBen Dooks2006-06-182-0/+6
| | | | | | | | | | | | | | Patch from Ben Dooks If CONFIG_CPU_DCACHE_WRITETHOUGH is set, then the S3C24XX PM code fails to compile, as there is no need to flush the D-cache, the flush function arm920_flush_kern_cache_all() is not compiled. Fix the code to not use this if the config is set. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3550/1: OSIRIS: fix serial port map for 1:1Ben Dooks2006-06-181-1/+1
| | | | | | | | | | | Patch from Ben Dooks The default serial port-mapping for the Osiris has the port 2 mapped onto the first serial port, and no port1. Correct this so port 1 is port. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3548/1: Fix the ARMv6 CPU id in compressed/head.SCatalin Marinas2006-06-181-2/+2
| | | | | | | | | | | Patch from Catalin Marinas This code was still using the old format for the ARMv6 CPU id and it wasn't flushing the caches on the MPCore CPU (and other ARM1176 cores). The patch changes the mask bits to cope with the new id format. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3335/1: Old-abi Thumb sys_syscall brokenPaul Brook2006-06-181-1/+1
| | | | | | | | | | | | | | | | Patch from Paul Brook The old-abi sys_syscall syscall is broken when called from Thumb mode. It assumes the syscall number is an Arm syscall number (ie. starts from __NR_OABI_SYSCALL_BASE). In thumb mode syscall numbers start from zero. The patch below fixes this by clearing the nigh bits of the syscall number instead of inverting them. Technically this means we accept some invalid syscall numbers, but I can't see how that could be a problem. The two sets of numbers far apart that unimplemented syscalls should still be rejected. Signed-off-by: Paul Brook <paul@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3467/1: [3/3] Support for Philips PNX4008 platform: defconfigVitaly Wool2006-06-181-0/+2072
| | | | | | | | | | | Patch from Vitaly Wool This patch adds default configuration file PNX4008 ARM platform. It\'s basically the same as the previos one. Signed-off-by: Vitaly Wool <vwool@ru.mvista.com> Signed-off-by: Dmitry Pervushin <dpervushin@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3466/1: [2/3] Support for Philips PNX4008 platform: chip supportVitaly Wool2006-06-1815-2/+3434
| | | | | | | | | | | | Patch from Vitaly Wool This patch adds basic chip support for PNX4008 ARM platform. It's basically the same as the previous one, but with the rmk's comments taken into account. Signed-off-by: Vitaly Wool <vwool@ru.mvista.com> Signed-off-by: Dmitry Pervushin <dpervushin@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3405/1: lpd7a40x: CPLD ssp driverMarc Singer2006-06-182-0/+348
| | | | | | | | | | Patch from Marc Singer Driver for operating SSP devices through LPD7A40X CPLD chip. This driver is used by the audio codecs. Signed-off-by: Marc Singer <elf@buici.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3404/1: lpd7a40x: AMBA CLCD supportMarc Singer2006-06-181-0/+241
| | | | | | | | | | Patch from Marc Singer Board support and LCD panel configurations to integrate lh7a40x's with the amba clcd driver. Signed-off-by: Marc Singer <elf@buici.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3403/1: lpd7a40x: updated default configurationsMarc Singer2006-06-182-127/+438
| | | | | | | | | Patch from Marc Singer Revised default configuration files. Signed-off-by: Marc Singer <elf@buici.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3401/1: lpd7a40x: platform updateMarc Singer2006-06-185-72/+367
| | | | | | | | | | Patch from Marc Singer Updates to the lpd7a40x_platform files. Includes support for new architecture, lpd7a400. Signed-off-by: Marc Singer <elf@buici.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3400/1: lpd7a40x: platform headers updateMarc Singer2006-06-182-0/+347
| | | | | | | | | | Patch from Marc Singer Updates to the lpd7a40x platform headers. Includes support for new architecture, lpd7a400. Signed-off-by: Marc Singer <elf@buici.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] powerpc: Fix 64k pages on non-partitioned machinesArnd Bergmann2006-06-171-2/+2
| | | | | | | | | | | | | The page size encoding passed to tlbie is incorrect for new-style large pages. This fixes it. This doesn't affect anything on older machines because mmu_psize_defs[psize].penc (the page size encoding) is 0 for 4k and 16M pages (the two are distinguished by a separate "is a large page" bit). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] alpha: generic hweight build fixRandy Dunlap2006-06-121-1/+1
| | | | | | | | | | | | | | From: Randy Dunlap <rdunlap@xenotime.net> According to include/asm-alpha/bitops.h, only ALPHA_EV67 has hardware hweight support, so ALPHA_EV6 needs to use GENERIC_HWEIGHT. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Ernst Herzberg <earny@net4u.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds2006-06-121-1/+0
|\ | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Do not double-export sys_close() when CONFIG_SOLARIS_EMUL_MODULE
| * [SPARC64]: Do not double-export sys_close() when CONFIG_SOLARIS_EMUL_MODULEDavid S. Miller2006-06-111-1/+0
| | | | | | | | | | | | | | | | It is already exported by fs/open.c Noticed by Ben Collins. Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2006-06-125-8/+13
|\ \ | |/ |/| | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] Fix Integrator and Versatile interrupt initialisation [ARM] 3546/1: PATCH: subtle lost interrupts bug on i.MX [ARM] 3547/1: PXA-OHCI: Allow platforms to specify a power budget [ARM] Fix Neponset IRQ handling
| * [ARM] Fix Integrator and Versatile interrupt initialisationRussell King2006-06-102-7/+3
| | | | | | | | | | | | | | | | | | | | Both Integrator and Versatile were using set_irq_handler() and enable_irq(), and working around the initialisation of the chained interrupt, instead of the more correct set_irq_chained_handler() function. Fix Integrator and Versatile to use the right function, and remove these work-arounds. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] 3546/1: PATCH: subtle lost interrupts bug on i.MXMatt Reimer2006-06-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Matt Reimer There is a subtle bug in the GPIO interrupt status register handling in arch/arm/mach-imx/irq.c:imx_gpio_ack_irq(). The documentation states that a 1 should be written to the relevant bit to acknowledge a GPIO interrupt, but that is not what the code does. The problem is that the |= writes back 1s for all the *other* interrupts represented in the register, so interrupts could get lost. For example, if interrupts are pending for GPIO B10 and B12, ISR_B would have the value 0x00001400. Then when the interrupt code handles GPIO B10, it eventually calls imx_gpio_ack_irq(IRQ_GPIOB(10)), which effectively does this: ISR_B |= 1 << 10; with the result that (0x00001400 | 0x00000400) is written, clearing the interrupt status bits for *both* GPIO B10 and B12. The fix is to write 1s only for the interrupts we want to clear. The same problem seems to be occurring in the DMA code; this patch does not address those issues. Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] 3547/1: PXA-OHCI: Allow platforms to specify a power budgetRichard Purdie2006-06-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | Patch from Richard Purdie Add a power budget variable to the PXA OHCI platform data and add a default value for the spitz platform(s) which prevents known failures with certain USB devices. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] Fix Neponset IRQ handlingRussell King2006-06-081-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While testing the genirq code on ARM, a condition was found whereby the Neponset IRQ handler was being re-entered, causing the system to deadlock. Under the ARM IRQ code, this would not have been a visible problem because the "simple" IRQ handling had no re-entrancy protection. Resolve this by acknowledging the parent interrupt after we mask it when we are going to handle one of our "special" level-based sources (from ethernet or USAR chip.) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | [SPARC]: Migration cost tune up in sparc smp.Krzysztof Helt2006-06-101-0/+11
| | | | | | | | | | | | | | | | | | This patch sets the max_cache_size value required to tune up scheduler in SMP systems. Otherwise, the calculated migration_cost is too high and task scheduling may lock up. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
* | [SPARC64]: Set appropriate max_cache_size.David S. Miller2006-06-101-0/+35
| | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds2006-06-102-10/+125
|\ \ | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Avoid JBUS errors on some Niagara systems. [FUSION]: Fix mptspi.c build with CONFIG_PM not set. [TG3]: Handle Sun onboard tg3 chips more correctly. [SPARC64]: Dump local cpu registers in sun4v_log_error()
| * | [SPARC64]: Avoid JBUS errors on some Niagara systems.David S. Miller2006-06-101-6/+118
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Doing PCI config space accesses to non-present PCI slots can result in fatal JBUS errors if the PCI config access hypervisor call is performed on cpus other than the boot cpu. PCI config space accesses to present PCI slots works just fine. Recursively traverse the OBP device tree under the PCI controller node and record all present device IDs into a small hash table. Avoid the hypervisor call for any PCI config space access attempt for a device not recorded in the hash table. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | [SPARC64]: Dump local cpu registers in sun4v_log_error()David S. Miller2006-06-091-4/+7
| | | | | | | | | | | | | | | | | | This makes the debugging information more usable. Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge branch 'merge' of ↵Linus Torvalds2006-06-105-7/+35
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [PATCH] powerpc: Fix cell blade detection [PATCH] powerpc: Fix call to ibm,client-architecture-support powerpc: Fix machine check problem on 32-bit kernels
| * | [PATCH] powerpc: Fix cell blade detectionArnd Bergmann2006-06-093-6/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The IBM Cell blade firmware might confuse the kernel to think it's a pSeries machine. This fixes it for now. With a bit of luck, the firmware will be updated to avoid that in the future but currently that patch is needed. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [PATCH] powerpc: Fix call to ibm,client-architecture-supportBenjamin Herrenschmidt2006-06-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The code in prom_init.c calling the firmware ibm,client-architecture-support method on pSeries has a bug where it fails to properly pass the instance handle of the firmware object when trying to call a method. Result ranges from the call doing nothing to the firmware crashing. (Found by Segher, thanks !) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | powerpc: Fix machine check problem on 32-bit kernelsPaul Mackerras2006-06-092-1/+12
| |/ | | | | | | | | | | | | | | | | This fixes a bug found by Dave Jones that means that it is possible for userspace to provoke a machine check on 32-bit kernels. This also fixes a couple of other places where I found similar problems by inspection. Signed-off-by: Paul Mackerras <paulus@samba.org>
* | [PATCH] ep93xx build fixLennert Buytenhek2006-06-081-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From: Lennert Buytenhek <buytenh@wantstofly.org> The recent renaming of m48t86's ->readb() and ->writeb() platform driver methods (2d7b20c1884777e66009be1a533641c19c4705f6) to ->readbyte() and ->writebyte() to fix the ia64 build broke the build of the cirrus ep93xx ARM platform. This patch fixes it up. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] Fix HPET operation on 64-bit NVIDIA platformsAndy Currid2006-06-081-5/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From: "Andy Currid" <ACurrid@nvidia.com> This patch fixes a kernel panic during boot that occurs on NVIDIA platforms that have HPET enabled. When HPET is enabled, the standard timer IRQ is routed to IOAPIC pin 2 and is advertised as such in the ACPI APIC table - but an earlier workaround in the kernel was ignoring this override. The fix is to honor timer IRQ overrides from ACPI when HPET is detected on an NVIDIA platform. Signed-off-by: Andy Currid <acurrid@nvidia.com> Cc: "Brown, Len" <len.brown@intel.com> Cc: "Yu, Luming" <luming.yu@intel.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] Fix HPET operation on 32-bit NVIDIA platformsAndy Currid2006-06-082-7/+27
|/ | | | | | | | | | | | | | | | | | | From: "Andy Currid" <ACurrid@nvidia.com> This patch fixes a kernel panic during boot that occurs on NVIDIA platforms that have HPET enabled. When HPET is enabled, the standard timer IRQ is routed to IOAPIC pin 2 and is advertised as such in the ACPI APIC table - but an earlier workaround in the kernel was ignoring this override. The fix is to honor timer IRQ overrides from ACPI when HPET is detected on an NVIDIA platform. Signed-off-by: Andy Currid <acurrid@nvidia.com> Cc: "Brown, Len" <len.brown@intel.com> Cc: "Yu, Luming" <luming.yu@intel.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds2006-06-058-8/+8
|\ | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] typo: buad -> baud
| * [SERIAL] typo: buad -> baudHorst Schirmeier2006-06-058-8/+8
| | | | | | | | | | | | | | Replacing mistyped "buad" with "baud" where applicable. Signed-off-by: Horst Schirmeier <horst@schirmeier.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2006-06-054-3/+4
|\ \ | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3543/1: [Fwd: PXA270 bootparams address not set] [ARM] Trivial typo fixes
| * | [ARM] 3543/1: [Fwd: PXA270 bootparams address not set]Steve Yang2006-06-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Steve Yang MACHINE_START struct doesn't have any bootargs location for the mainstone. Result is no kernel command args get passed; no serial driver is selected for console and results in a silent boot failure. Signed-off-by: Steve Yang <steve.yang@windriver.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] Trivial typo fixesEgry Gabor2006-06-043-3/+3
| |/ | | | | | | | | | | | | Trivial typo fixes in Kconfig files (ARM). Signed-off-by: Egry Gabor <gaboregry@t-online.hu> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | [MIPS] Fix sparsemem support.Chad Reese2006-06-062-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | Move memory_present() in arch/mips/kernel/setup.c. When using sparsemem extreme, this function does an allocate for bootmem. This would always fail since init_bootmem hasn't been called yet. Move memory_present after free_bootmem. This only marks actual memory ranges as present instead of the entire address space. Signed-off-by: Chad Reese <creese@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | [MIPS] Fix compiler warnings (field width, unused variable)Atsushi Nemoto2006-06-066-11/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix following warnings: linux/arch/mips/kernel/setup.c:432: warning: field width is not type int (arg 2) linux/arch/mips/kernel/setup.c:432: warning: field width is not type int (arg 4) linux/arch/mips/kernel/syscall.c:279: warning: unused variable `len' linux/arch/mips/kernel/syscall.c:280: warning: unused variable `name' linux/arch/mips/math-emu/dp_fint.c:32: warning: unused variable `xc' linux/arch/mips/math-emu/dp_flong.c:32: warning: unused variable `xc' linux/arch/mips/math-emu/sp_fint.c:32: warning: unused variable `xc' linux/arch/mips/math-emu/sp_flong.c:32: warning: unused variable `xc' (original patch by Atsushi, slight changes to the setup.c part by me.) Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | [MIPS] Fix sparse warnings about too big constants.Atsushi Nemoto2006-06-062-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | Fix following warnings: linux/arch/mips/kernel/setup.c:249:12: warning: constant 0xffffffff00000000 is so big it is unsigned long linux/arch/mips/kernel/cpu-bugs64.c:209:10: warning: constant 0xffffffffffffdb9a is so big it is unsigned long linux/arch/mips/kernel/cpu-bugs64.c:227:10: warning: constant 0xffffffffffffdb9a is so big it is unsigned long linux/arch/mips/kernel/cpu-bugs64.c:283:10: warning: constant 0xffffffffffffdb9a is so big it is unsigned long linux/arch/mips/kernel/cpu-bugs64.c:299:10: warning: constant 0xffffffffffffdb9a is so big it is unsigned long Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | [MIPS] IP32: Fix warnings.Ralf Baechle2006-06-061-2/+2
| | | | | | | | | | | | The expressions are volatile; no need for temporary variables. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | [MIPS] SB1: Only pass1 FPUs are broken beyond recovery.Ralf Baechle2006-06-061-1/+1
| | | | | | | | | | | | | | The wrong revision number in the check was forcing a fallback to FPU emulation for all SB1 cores in 2.6. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
OpenPOWER on IntegriCloud