summaryrefslogtreecommitdiffstats
path: root/arch/um/kernel/skas
Commit message (Collapse)AuthorAgeFilesLines
* uml: fix order of pud and pmd_free()Roel Kluin2009-09-221-2/+2
| | | | | | | | | | If pmd_alloc() fails we should only free the prior allocated pud, if pte_alloc_map() fails, we should free pmd as well. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: fix mm_context memory leakJeff Dike2008-02-081-0/+5
| | | | | | | | | | | | | | [ Spotted by Miklos ] Fix a memory leak in init_new_context. The struct page ** buffer allocated for install_special_mapping was never recorded, and thus leaked when the mm_struct was freed. Fix it by saving the pointer in mm_context_t and freeing it in arch_exit_mmap. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: redo the calculation of NR_syscallsJeff Dike2008-02-051-0/+3
| | | | | | | | | | | | | | | | | | | | Redo the calculation of NR_syscalls since that disappeared from i386 and use a similar mechanism on x86_64. We now figure out the size of the system call table in arch code and stick that in syscall_table_size. arch/um/kernel/skas/syscall.c defines NR_syscalls in terms of that since its the only thing that needs to know how many system calls there are. The old mechananism that was used on x86_64 is gone. arch/um/include/sysdep-i386/syscalls.h got some formatting since I was looking at it. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: get rid of syscall countersJeff Dike2008-02-051-3/+0
| | | | | | | | Get rid of some syscall counters which haven't been useful in ages. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: don't kill pid 0Jeff Dike2008-02-051-1/+13
| | | | | | | | | | | | | | | A bit of defensive programming - during development, it ocassionally happens that a call to init_new_context is missed, resulting in context holding a host pid of zero. When that address space is torn down, destroy_context does a kill(0), which instantly kills the whole UML without any errors whatsoever. This patch add a check for pids less than 2, to also catch 1 and negative pids. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: eliminate setjmp_wrapperJeff Dike2008-02-051-46/+27
| | | | | | | | | | | | | | | | | setjmp_wrapper existed to provide setjmp to kernel code when UML used libc's setjmp and longjmp. Now that UML has its own implementation, this isn't needed and kernel code can invoke setjmp directly. do_buffer_op is massively cleaned up since it is no longer a callback from setjmp_wrapper and given a va_list from which it must extract its arguments. The actual setjmp is moved from buffer_op to do_op_one_page because the copy operation is inside an atomic section (kmap_atomic to kunmap_atomic) and it shouldn't be longjmp-ed out of. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: cover stubs with a VMAJeff Dike2008-02-051-45/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Give the stubs a VMA. This allows the removal of a truly nasty kludge to make sure that mm->nr_ptes was correct in exit_mmap. The underlying problem was always that the stubs, which have ptes, and thus allocated a page table, weren't covered by a VMA. This patch fixes that by using install_special_mapping in arch_dup_mmap and activate_context to create the VMA. The stubs have to be moved, since shift_arg_pages seems to assume that the stack is the only VMA present at that point during exec, and uses vma_adjust to fiddle its VMA. However, that extends the stub VMA by the amount removed from the stack VMA. To avoid this problem, the stubs were moved to a different fixed location at the start of the address space. The init_stub_pte calls were moved from init_new_context to arch_dup_mmap because I was occasionally seeing arch_dup_mmap not being called, causing exit_mmap to die. Rather than figure out what was really happening, I decided it was cleaner to just move the calls so that there's no doubt that both the pte and VMA creation happen, no matter what. arch_exit_mmap is used to clear the stub ptes at exit time. The STUB_* constants in as-layout.h no longer depend on UM_TASK_SIZE, that that definition is removed, along with the comments complaining about gcc. Because the stubs are no longer at the top of the address space, some care is needed while flushing TLBs. update_pte_range checks for addresses in the stub range and skips them. flush_thread now issues two unmaps, one for the range before STUB_START and one for the range after STUB_END. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: kill processes instead of panicing kernelJeff Dike2008-02-052-4/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | UML was panicing in the case of failures of libc calls which shouldn't happen. This is an overreaction since a failure from libc doesn't normally mean that kernel data structures are in an unknown state. Instead, the current process should just be killed if there is no way to recover. The case that prompted this was a failure of PTRACE_SETREGS restoring the same state that was read by PTRACE_GETREGS. It appears that when a process tries to load a bogus value into a segment register, it segfaults (as expected) and the value is actually loaded and is seen by PTRACE_GETREGS (not expected). This case is fixed by forcing a fatal SIGSEGV on the process so that it immediately dies. fatal_sigsegv was added for this purpose. It was declared as noreturn, so in order to pursuade gcc that it actually does not return, I added a call to os_dump_core (and declared it noreturn) so that I get a core file if somehow the process survives. All other calls in arch/um/os-Linux/skas/process.c got the same treatment, with failures causing the process to die instead of a kernel panic, with some exceptions. userspace_tramp exits with status 1 if anything goes wrong there. That will cause start_userspace to return an error. copy_context_skas0 and map_stub_pages also now return errors instead of panicing. Callers of thes functions were changed to check for errors and do something appropriate. Usually that's to return an error to their callers. check_skas3_ptrace_faultinfo just exits since that's too early to do anything else. save_registers, restore_registers, and init_registers now return status instead of panicing on failure, with their callers doing something appropriate. There were also duplicate declarations of save_registers and restore_registers in os.h - these are gone. I noticed and fixed up some whitespace damage. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: add virt_to_pteJeff Dike2008-02-051-33/+23
| | | | | | | | | | | Turn um_virt_to_phys into virt_to_pte, cleaning up a horrid interface. It's also made non-static and declared in pgtable.h because it'll be needed when the stubs get a vma. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: header untanglingJeff Dike2008-02-051-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Untangle UML headers somewhat and add some includes where they were needed explicitly, but gotten accidentally via some other header. arch/um/include/um_uaccess.h loses asm/fixmap.h because it uses no fixmap stuff and gains elf.h, because it needs FIXADDR_USER_*, and archsetjmp.h, because it needs jmp_buf. pmd_alloc_one is uninlined because it needs mm_struct, and that's inconvenient to provide in asm-um/pgtable-3level.h. elf_core_copy_fpregs is also uninlined from elf-i386.h and elf-x86_64.h, which duplicated the code anyway, to arch/um/kernel/process.c, so that the reference to current_thread doesn't pull sched.h or anything related into asm/elf.h. arch/um/sys-i386/ldt.c, arch/um/kernel/tlb.c and arch/um/kernel/skas/uaccess.c got sched.h because they dereference task_structs. Its includes of linux and asm headers got turned from "" to <>. arch/um/sys-i386/bug.c gets asm/errno.h because it needs errno constants. asm/elf-i386 gets asm/user.h because it needs user_regs_struct. asm/fixmap.h gets page.h because it needs PAGE_SIZE and PAGE_MASK and system.h for BUG_ON. asm/pgtable doesn't need sched.h. asm/processor-generic.h defined mm_segment_t, but didn't use it. So, that definition is moved to uaccess.h, which defines a bunch of mm_segment_t-related stuff. thread_info.h uses mm_segment_t, and includes uaccess.h, which causes a recursion. So, the definition is placed above the include of thread_info. in uaccess.h. thread_info.h also gets page.h because it needs PAGE_SIZE. ObCheckpatchViolationJustification - I'm not adding a typedef; I'm moving mm_segment_t from one place to another. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: move um_virt_to_physJeff Dike2008-02-051-2/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patchset makes UML build and run with three-level page tables on 32-bit hosts. This is an uncommon use case, but the code here needed fixing and cleaning up, so 32-bit three-level pages tables were tested to make sure the changes are good. Patch 1 - code movement Patch 2 - header untangling Patch 3 - style fixups in files affected so far Patch 4 - clean up use of current.h Patch 5 - fix sizes of types that are different between 2 and 3-level page tables - three-level page table support should build at this point Patch 6 - tidy (i.e. eliminate much of) the code that figures out how big the address space is Patch 7 - change um_virt_to_phys into virt_to_pte, clean its interface, and clean its (so far) one caller Patch 8 - the stub pages are covered with a VMA, allowing some nasty code to be thrown out - three-level page tables now work This patch: um_virt_to_phys only has one user, so it can be moved to the same file and made static. Its declarations in pgtable.h and ksyms.c are also gone. current_cmd was another apparent user, but it itself isn't used, so it is deleted. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: clone.c tidyingJeff Dike2008-02-051-14/+18
| | | | | | | | | | | clone.c needed some style attention - updated copyright include trimming coding style Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* add mm argument to pte/pmd/pud/pgd_freeBenjamin Herrenschmidt2008-02-051-4/+4
| | | | | | | | | | | | | | | | | | (with Martin Schwidefsky <schwidefsky@de.ibm.com>) The pgd/pud/pmd/pte page table allocation functions get a mm_struct pointer as first argument. The free functions do not get the mm_struct argument. This is 1) asymmetrical and 2) to do mm related page table allocations the mm argument is needed on the free function as well. [kamalesh@linux.vnet.ibm.com: i386 fix] [akpm@linux-foundation.org: coding-syle fixes] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: remove last include of libc asm/page.hJeff Dike2007-11-141-1/+0
| | | | | | | | asm/page.h is disappearing from the libc headers and we don't need it anyway. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: fix stub address calculationsJeff Dike2007-10-163-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The calculation of CONFIG_STUB_CODE and CONFIG_STUB_DATA didn't take into account anything but 3G/1G and 2G/2G, leaving the other vmsplits out in the cold. I'd rather not duplicate the four known host vmsplit cases for each of these symbols. I'd also like to calculate them based on the highest userspace address. The Kconfig language seems not to allow calculation of hex constants, so I moved this to as-layout.h. CONFIG_STUB_CODE, CONFIG_STUB_DATA, and CONFIG_STUB_START are now gone. In their place are STUB_CODE, STUB_DATA, and STUB_START in as-layout.h. i386 and x86_64 seem to differ as to whether an unadorned constant is an int or a long, so I cast them to unsigned long so they can be printed consistently. However, they are also used in stub.S, where C types don't work so well. So, there are ASM_ versions of these constants for use in stub.S. I also ifdef-ed the non-asm-friendly portion of as-layout.h. With this in place, most of the rest of this patch is changing CONFIG_STUB_* to STUB_*, except in stub.S, where they are changed to ASM_STUB_*. defconfig has the old symbols deleted. I also print these addresses out in case there is any problem mapping them on the host. The two stub.S files had some trailing whitespace, so that is cleaned up here. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: remove os_* usage from userspace filesJeff Dike2007-10-161-74/+60
| | | | | | | | | | | | | | This patch fixes some userspace files which were calling libc through the os_* wrappers. It turns out that there was only one user of os_new_tty_pgrp, so it can be deleted. There are also some style and whitespace fixes in here. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: free LDT state on process exitJeff Dike2007-10-161-0/+2
| | | | | | | | | The space allocated for a process LDT wasn't being freed when the process exited. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: rename pt_regs general-purpose register fileJeff Dike2007-10-161-1/+1
| | | | | | | | | | | | Before the removal of tt mode, access to a register on the skas-mode side of a pt_regs struct looked like pt_regs.regs.skas.regs.regs[FOO]. This was bad enough, but it became pt_regs.regs.regs.regs[FOO] with the removal of the union from the middle. To get rid of the run of three "regs", the last field is renamed to "gp". Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: fold mmu_context_skas into mm_contextJeff Dike2007-10-162-7/+7
| | | | | | | | | This patch folds mmu_context_skas into struct mm_context, changing all users of these structures as needed. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: style fixes pass 3Jeff Dike2007-10-164-66/+44
| | | | | | | | | | | | | | | Formatting changes in the files which have been changed in the course of folding foo_skas functions into their callers. These include: copyright updates header file trimming style fixes adding severity to printks These changes should be entirely non-functional. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: remove code made redundant by CHOOSE_MODE removalJeff Dike2007-10-167-381/+13
| | | | | | | | | | | | | | | | | | | | | | This patch makes a number of simplifications enabled by the removal of CHOOSE_MODE. There were lots of functions that looked like int foo(args){ foo_skas(args); } The bodies of foo_skas are now folded into foo, and their declarations (and sometimes entire header files) are deleted. In addition, the union uml_pt_regs, which was a union between the tt and skas register formats, is now a struct, with the tt-mode arm of the union being removed. It turns out that usr2_handler was unused, so it is gone. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: throw out CHOOSE_MODEJeff Dike2007-10-161-6/+6
| | | | | | | | | | | | | | | | | The next stage after removing code which depends on CONFIG_MODE_TT is removing the CHOOSE_MODE abstraction, which provided both compile-time and run-time branching to either tt-mode or skas-mode code. This patch removes choose-mode.h and all inclusions of it, and replaces all CHOOSE_MODE invocations with the skas branch. This leaves a number of trivial functions which will be dealt with in a later patch. There are some changes in the uaccess and tls support which go somewhat beyond this and eliminate some of the now-redundant functions. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: more __init annotationsJeff Dike2007-07-241-2/+2
| | | | | | | | | | | | | | | | 2.6.23-rc1 turned up another batch of references from non-__init code to __init code. In most cases, these were missing __init annotations. In one case (os_drop_memory), the annotation was present but wrong. init_maps is __init, but for some reason was being very careful about the mechanism by which it allocated memory, checking whether it was OK to use kmalloc (at this point in the boot, it definitely isn't) and using either alloc_bootmem_low_pages or kmalloc/vmalloc. So, the kmalloc/vmalloc code is removed. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: iRQ stacksJeff Dike2007-05-111-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a separate IRQ stack. This differs from i386 in having the entire interrupt run on a separate stack rather than starting on the normal kernel stack and switching over once some preparation has been done. The underlying mechanism, is of course, sigaltstack. Another difference is that interrupts that happen in userspace are handled on the normal kernel stack. These cause a wait wakeup instead of a signal delivery so there is no point in trying to switch stacks for these. There's no other stuff on the stack, so there is no extra stack consumption. This quirk makes it possible to have the entire interrupt run on a separate stack - process preemption (and calls to schedule()) happens on a normal kernel stack. If we enable CONFIG_PREEMPT, this will need to be rethought. The IRQ stack for CPU 0 is declared in the same way as the initial kernel stack. IRQ stacks for other CPUs will be allocated dynamically. An extra field was added to the thread_info structure. When the active thread_info is copied to the IRQ stack, the real_thread field points back to the original stack. This makes it easy to tell where to copy the thread_info struct back to when the interrupt is finished. It also serves as a marker of a nested interrupt. It is NULL for the first interrupt on the stack, and non-NULL for any nested interrupts. Care is taken to behave correctly if a second interrupt comes in when the thread_info structure is being set up or taken down. I could just disable interrupts here, but I don't feel like giving up any of the performance gained by not flipping signals on and off. If an interrupt comes in during these critical periods, the handler can't run because it has no idea what shape the stack is in. So, it sets a bit for its signal in a global mask and returns. The outer handler will deal with this signal itself. Atomicity is had with xchg. A nested interrupt that needs to bail out will xchg its signal mask into pending_mask and repeat in case yet another interrupt hit at the same time, until the mask stabilizes. The outermost interrupt will set up the thread_info and xchg a zero into pending_mask when it is done. At this point, nested interrupts will look at ->real_thread and see that no setup needs to be done. They can just continue normally. Similar care needs to be taken when exiting the outer handler. If another interrupt comes in while it is copying the thread_info, it will drop a bit into pending_mask. The outer handler will check this and if it is non-zero, will loop, set up the stack again, and handle the interrupt. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: turn build warnings into commentsMiklos Szeredi2007-05-091-3/+6
| | | | | | | | | | | | | | | | | These haven't been fixed for ages. Just make comments out of them. arch/um/kernel/skas/process.c:181:2: warning: #warning Need to look up +userspace_pid by cpu arch/um/kernel/skas/process.c:187:2: warning: #warning Need to look up +userspace_pid by cpu arch/um/kernel/skas/process.c:194:2: warning: #warning need to loop over +userspace_pids in kill_off_processes_skas Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: only flush areas covered by VMAJeff Dike2007-05-071-2/+7
| | | | | | | | | When doing a full address space flush, only look at areas covered by a VMA. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: more page fault path trimmingJeff Dike2007-05-071-10/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | More trimming of the page fault path. Permissions are passed around in a single int rather than one bit per int. The permission values are copied from libc so that they can be passed to mmap and mprotect without any further conversion. The register sets used by do_syscall_stub and copy_context_skas0 are initialized once, at boot time, rather than once per call. wait_stub_done checks whether it is getting the signals it expects by comparing the wait status to a mask containing bits for the signals of interest rather than comparing individually to the signal numbers. It also has one check for a wait failure instead of two. The caller is expected to do the initial continue of the stub. This gets rid of an argument and some logic. The fname argument is gone, as that can be had from a stack trace. user_signal() is collapsed into userspace() as it is basically one or two lines of code afterwards. The physical memory remapping stuff is gone, as it is unused. flush_tlb_page is inlined. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: speed page fault pathJeff Dike2007-05-071-2/+64
| | | | | | | | | | | | | | | | | | Give the page fault code a specialized path. There is only one page to look at, so there's no point in going into the general page table walking code. There's only going to be one host operation, so there are no opportunities for merging. So, we go straight to the pte we want, figure out what needs doing, and do it. While I was in here, I fixed the wart where the address passed to unmap was a void *, but an unsigned long to map and protect. This gives me just under 10% on a kernel build. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: speed up execJeff Dike2007-05-071-1/+11
| | | | | | | | | | | | | flush_thread doesn't need to do a full page table walk in order to clear the address space. It knows what the end result needs to be, so it can call unmap directly. This results in a 10-20% speedup in an exec from bash. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: remove user_util.hJeff Dike2007-05-072-2/+0
| | | | | | | | | user_util.h isn't needed any more, so delete it and remove all includes of it. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: create as-layout.hJeff Dike2007-05-071-0/+1
| | | | | | | | | | | | | This patch moves all the the symbols defined in um_arch.c, which are mostly boundaries between different parts of the UML kernel address space, to a new header, as-layout.h. There are also a few things here which aren't really related to address space layout, but which don't really have a better place to go. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] uml: remove code controlled by non-existent config optionJeff Dike2007-02-111-5/+1
| | | | | | | | | CONFIG_HOST_TASK_SIZE doesn't exist any more. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] uml: correct removal of pte_mkexecPaolo 'Blaisorblade' Giarrusso2006-10-111-4/+1
| | | | | | | | | | | | | Correct commit 5906e4171ad61ce68de95e51b773146707671f80 - this makes more sense: we turn pte_mkexec + pte_wrprotect to pte_mkread. However, due to a bug in pte_mkread, it does the exact same thing as pte_mkwrite, so this patch improves the code but does not change anything in practice. The pte_mkread bug is fixed separately, as it may have big impact. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Remove all inclusions of <linux/config.h>Dave Jones2006-10-043-3/+0
| | | | | | kbuild explicitly includes this at build time. Signed-off-by: Dave Jones <davej@redhat.com>
* [PATCH] uml: remove pte_mkexecJeff Dike2006-09-291-2/+4
| | | | | | | | | | | | Andi is making pte_mkexec go away, and UML had one of the last uses. This removes the use and the definition. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] uml: remove unneeded fileJeff Dike2006-09-291-484/+0
| | | | | | | | | | Remove arch/um/kernel/skas/process_kern.c again. The stack alignment change which resulted in this file being here is safely in arch/um/kernel/process.c. Signed-off-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] uml: file renamingJeff Dike2006-09-275-174/+646
| | | | | | | | | | | Move some foo_kern.c files to foo.c now that the old foo.c files are out of the way. Also cleaned up some whitespace and an emacs formatting comment. Signed-off-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] uml: thread creation tidyingJeff Dike2006-09-271-23/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fork on UML has always somewhat subtle. The underlying cause has been the need to initialize a stack for the new process. The only portable way to initialize a new stack is to set it as the alternate signal stack and take a signal. The signal handler does whatever initialization is needed and jumps back to the original stack, where the fork processing is finished. The basic context switching mechanism is a jmp_buf for each process. You switch to a new process by longjmping to its jmp_buf. Now that UML has its own implementation of setjmp and longjmp, and I can poke around inside a jmp_buf without fear that libc will change the structure, a much simpler mechanism is possible. The jmpbuf can simply be initialized by hand. This eliminates - the need to set up and remove the alternate signal stack sending and handling a signal the signal blocking needed around the stack switching, since there is no stack switching setting up the jmp_buf needed to jump back to the original stack after the new one is set up In addition, since jmp_buf is now defined by UML, and not by libc, it can be embedded in the thread struct. This makes it unnecessary to have it exist on the stack, where it used to be. It also simplifies interfaces, since the switch jmp_buf used to be a void * inside the thread struct, and functions which took it as an argument needed to define a jmp_buf variable and assign it from the void *. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Standardize pxx_page macrosDave McCracken2006-09-261-1/+1
| | | | | | | | | | | | | | | | | | | | | One of the changes necessary for shared page tables is to standardize the pxx_page macros. pte_page and pmd_page have always returned the struct page associated with their entry, while pte_page_kernel and pmd_page_kernel have returned the kernel virtual address. pud_page and pgd_page, on the other hand, return the kernel virtual address. Shared page tables needs pud_page and pgd_page to return the actual page structures. There are very few actual users of these functions, so it is simple to standardize their usage. Since this is basic cleanup, I am submitting these changes as a standalone patch. Per Hugh Dickins' comments about it, I am also changing the pxx_page_kernel macros to pxx_page_vaddr to clarify their meaning. Signed-off-by: Dave McCracken <dmccr@us.ibm.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] uml: remove syscall debuggingJeff Dike2006-07-101-7/+0
| | | | | | | | | Eliminate an unused debug option. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] uml: signal initialization cleanupJeff Dike2006-07-101-1/+1
| | | | | | | | | | It turns out that init_new_thread_signals is always called with altstack == 1, so we can eliminate the parameter. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] uml: fix static binary segfaultJeff Dike2006-07-101-6/+5
| | | | | | | | | | | | | | When UML is built as a static binary, it segfaults when run. The reason is that a memory hole that is present in dynamic binaries isn't there in static binaries, and it contains essential stuff. This fix removes the code which maps some anonymous memory into that hole and cleans up some related code. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] uml: clean up address space limits codeTyler2006-07-101-15/+4
| | | | | | | | | | | | | | | | | | I was looking at the code of the UML and more precisely at the functions set_task_sizes_tt and set_task_sizes_skas. I noticed that these 2 functions take a paramater (arg) which is not used : the function is always called with the value 0. I suppose that this value might change in the future (or even can be configured), so I added a constant in mem_user.h file. Also, I rounded CONFIG_HOST_TASk_SIZE to a 4M. Signed-off-by: Tyler <tyler@agat.net> Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] uml: make copy_*_user atomicPaolo 'Blaisorblade' Giarrusso2006-07-011-6/+9
| | | | | | | | | | | | | | | | | | | | | | Make __copy_*_user_inatomic really atomic to avoid "Sleeping function called in atomic context" warnings, especially from futex code. This is made by adding another kmap_atomic slot and making copy_*_user_skas use kmap_atomic; also copy_*_user() becomes atomic, but that's true and is not a problem for i386 (and we can always add might_sleep there as done elsewhere). For TT mode kmap is not used, so there's no need for this. I've had to use another slot since both KM_USER0 and KM_USER1 are used elsewhere and could cause conflicts. Till now we reused the kmap_atomic slot list from the subarch, but that's not needed as that list must contain the common ones (used by generic code) + the ones used in architecture specific code (and Uml till now used none); so I've taken the i386 one after comparing it with ones from other archs, and added KM_UML_USERCOPY. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] zoned vm counters: conversion of nr_pagetables to per zone counterChristoph Lameter2006-06-301-1/+1
| | | | | | | | | Conversion of nr_page_table_pages to a per zone counter [akpm@osdl.org: bugfix] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] uml: cleanup unprofile expression and build infrastructurePaolo 'Blaisorblade' Giarrusso2006-05-011-7/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | *) Rather than duplicate in various buggy ways the application of CFLAGS_NO_HARDENING and UNPROFILE (which apply to the same files), centralize it in Makefile.rules. UNPROFILE_OBJS mustn't be listed in USER_OBJS but are compiled as such. I've also verified that unprofile didn't work in the current form, because we set _c_flags directly (using CFLAGS and not USER_CFLAGS, which is wrong), which is normally used by c_flags, but we also override c_flags for all USER_OBJS, and there we don't call unprofile. Instead it only worked for unmap.o, the only one which wasn't a USER_OBJ. We need to set c_flags (which is not a public Kbuild API) to clear a lot of compilation flags like -nostdinc which Kbuild forces on everything. *) Rather than $(CFLAGS_$(notdir $@)), which expands to CFLAGS_anObj.s when building "anObj.s", use $(CFLAGS_$(*F).o) which always accesses CFLAGS_anObj.o, like done by Kbuild. *) Make c_flags apply to all targets having the same basename, rather than listing .s, .i, .lst and .o, with the use (which I tested) of $(USER_OBJS:.o=.%): c_flags = ... and of - $(obj)/unmap.c: _c_flags = ... + $(obj)/unmap.%: _c_flags = ... Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Acked-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] uml: fix compilation and execution with hardened GCCPaolo 'Blaisorblade' Giarrusso2006-05-011-1/+8
| | | | | | | | | | | | | | | | | | | To make some half-assembly stubs compile, disable various "hardened" GCC features: *) we can't make it build PIC code as we need %ebx to do syscalls and GCC wants it free for PIC *) we can't leave stack protection as the stub is moved (not relocated!) in memory so the RIP-relative access to the canary tries reading from an unmapped address and causes a segfault, since we move the stub of various megabytes (the exact amount will be decided at runtime) away from the link-time address. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Acked-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] uml: add arch_switch_to for newly forked threadPaolo 'Blaisorblade' Giarrusso2006-03-311-0/+7
| | | | | | | | | | | | Newly forked threads have no arch_switch_to_skas() called before their first run, because when schedule() switches to them they're resumed in the body of thread_wait() inside fork_handler() rather than in switch_threads() in switch_to_skas(). Compensate this missing call. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Acked-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] uml: implement {get,set}_thread_area for i386Paolo 'Blaisorblade' Giarrusso2006-03-311-0/+2
| | | | | | | | | | | | | | | | | | | | | | Implement sys_[gs]et_thread_area and the corresponding ptrace operations for UML. This is the main chunk, additional parts follow. This implementation is now well tested and has run reliably for some time, and we've understood all the previously existing problems. Their implementation saves the new GDT content and then forwards the call to the host when appropriate, i.e. immediately when the target process is running or on context switch otherwise (i.e. on fork and on ptrace() calls). In SKAS mode, we must switch registers on each context switch (because SKAS does not switches tls_array together with current->mm). Also, added get_cpu() locking; this has been done for SKAS mode, since TT does not need it (it does not use smp_processor_id()). Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Acked-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] uml: clean arch_switch usagePaolo 'Blaisorblade' Giarrusso2006-03-311-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Call arch_switch also in switch_to_skas, even if it's, for now, a no-op for that case (and mark this in the comment); this will change soon. Also, arch_switch for TT mode is actually useless when the PT proxy (a complicate debugging instrumentation for TT mode) is not enabled. In fact, it only calls update_debugregs, which checks debugregs_seq against seq (to check if the registers are up-to-date - seq here means a "version number" of the registers). If the ptrace proxy is not enabled, debugregs_seq always stays 0 and update_debugregs will be a no-op. So, optimize this out (the compiler can't do it). Also, I've been disappointed by the fact that it would make a lot of sense if, after calling a successful update_debugregs(current->thread.arch.debugregs_seq), current->thread.arch.debugregs_seq were updated with the new debugregs_seq. But this is not done. Is this a bug or a feature? For all purposes, it seems a bug (otherwise the whole mechanism does not make sense, which is also a possibility to check), which causes some performance only problems (not correctness), since we write_debugregs when not needed. Also, as suggested by Jeff, remove a redundant enabling of SIGVTALRM, comprised in the subsequent local_irq_enable(). I'm just a bit dubious if ordering matters there... Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Acked-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
OpenPOWER on IntegriCloud