summaryrefslogtreecommitdiffstats
path: root/arch/sparc64
Commit message (Collapse)AuthorAgeFilesLines
* sparc64: setup_valid_addr_bitmap_from_pavail() should be __initDavid S. Miller2008-08-301-1/+1
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc: Fix resource flags for PCI children in OF device tree.David S. Miller2008-08-281-6/+14
| | | | | | | | | | | | When a device is under an EBUS or ISA bus, the resource flags don't get set properly. Fix this by re-evaluating the resource flags at each level of bus as we apply ranges on the way to the root. And let PCI override any existing flags setting, but don't let the default flags calculator make such overrides. Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Make NUMA depend upon SMP.David S. Miller2008-08-241-0/+1
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Fix cmdline_memory_size handling bugs.David S. Miller2008-08-141-8/+19
| | | | | | | | | | | | | | | | | | | | | | | First, lmb_enforce_memory_limit() interprets it's argument (mostly, heh) as a size limit not an address limit. So pass the raw cmdline_memory_size value into it. And we don't need to check it against zero, lmb_enforce_memory_limit() does that for us. Next, free_initmem() needs special handling when the kernel command line trims the available memory. The problem case is if the trimmed out memory is where the kernel image itself resides. When that memory is trimmed out, we don't add those physical ram areas to the sparsemem active ranges, amongst other things. Which means that this free_initmem() code will free up invalid page structs, resulting in either crashes or hangs. Just quick fix this by not freeing initmem at all if "mem=" was given on the boot command line. Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Fix overshoot in nid_range().David S. Miller2008-08-141-0/+3
| | | | | | | If 'start' does not begin on a page boundary, we can overshoot past 'end'. Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Handle stack trace attempts before irqstacks are setup.David S. Miller2008-08-132-20/+21
| | | | | | | | | | Things like lockdep can try to do stack backtraces before the irqstack blocks have been setup. So don't try to match their ranges so early on. Also, remove unused variable in save_stack_trace(). Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Implement IRQ stacks.David S. Miller2008-08-127-30/+157
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Fix recursion in stack overflow detection handling.David S. Miller2008-08-121-3/+14
| | | | | | | | | | | The calls down into prom_printf() when we detect an overflowed stack can recurse again since the overflow stack will be "below" the current kernel stack limit. Prevent this by just returning straight if we are on the stack overflow safe stack already. Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Don't MAGIC_SYSRQ ifdef smp_fetch_global_regs and support code.David S. Miller2008-08-092-6/+0
| | | | | | | | | | | | Based upon a report and initial patch by Friedrich Oslage. The intention is to provide this facility for __trigger_all_cpu_backtrace even if MAGIC_SYSRQ is not set. The only part that should have MAGIC_SYSRQ ifdef protection is the sparc_globalreg_op sysrq regitration and immediate code. Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Fix end-of-stack checking in save_stack_trace().David S. Miller2008-08-071-2/+4
| | | | | | | | | | Bug reported by Alexander Beregalov. Before we dereference the stack frame or try to peek at the pt_regs magic value, make sure the entire object is within the kernel stack bounds. Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc: don't use asm/of_device.hStephen Rothwell2008-08-079-9/+9
| | | | | | | Use linux/of_device.h instead. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Use kernel/uid16.c helpers instead of own copy.David S. Miller2008-08-062-186/+10
| | | | | | Noticed by Adrian Bunk. Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Remove all cpumask_t local variables in xcall dispatch.David S. Miller2008-08-041-24/+9
| | | | | | | | | All of the xcall delivery implementation is cpumask agnostic, so we can pass around pointers to const cpumask_t objects everywhere. The sad remaining case is the argument to arch_send_call_function_ipi(). Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Kill error_mask from hypervisor_xcall_deliver().David S. Miller2008-08-041-13/+7
| | | | | | | | It can eat up a lot of stack space when NR_CPUS is large. We retain some of it's functionality by reporting at least one of the cpu's which are seen in error state. Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Build cpu list and mondo block at top-level xcall_deliver().David S. Miller2008-08-041-44/+69
| | | | | | | | | | Then modify all of the xcall dispatch implementations get passed and use this information. Now all of the xcall dispatch implementations do not need to be mindful of details such as "is current cpu in the list?" and "is cpu online?" Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Disable local interrupts around xcall_deliver_impl() invocation.David S. Miller2008-08-041-17/+15
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Make all xcall_deliver's go through common helper function.David S. Miller2008-08-041-4/+9
| | | | | | | This just facilitates the next changeset where we'll be building the cpu list and mondo block in this helper function. Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Always allocate the send mondo blocks, even on non-sun4v.David S. Miller2008-08-041-3/+16
| | | | | | | The idea is that we'll use this cpu list array and mondo block even for non-hypervisor platforms. Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Make smp_cross_call_masked() take a cpumask_t pointer.David S. Miller2008-08-041-7/+11
| | | | | | | | | | Ideally this could be simplified further such that we could pass the pointer down directly into the xcall_deliver() implementation. But if we do that we need to do the "cpu_online(cpu)" and "cpu != self" checks down in those functions. Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Directly call xcall_deliver() in smp_start_sync_tick_client.David S. Miller2008-08-041-4/+2
| | | | | | We know the cpu is online and not the current cpu here. Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Call xcall_deliver() directly in some cases.David S. Miller2008-08-041-23/+10
| | | | | | | | | | | | | | | | | | | | For these cases the callers make sure: 1) The cpus indicated are online. 2) The current cpu is not in the list of indicated cpus. Therefore we can pass a pointer to the mask directly. One of the motivations in this transformation is to make use of "&cpumask_of_cpu(cpu)" which evaluates to a pointer to constant data in the kernel and thus takes up no stack space. Hopefully someone in the future will change the interface of arch_send_call_function_ipi() such that it passes a const cpumask_t pointer so that this will optimize ever further. Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Use cpumask_t pointers and for_each_cpu_mask_nr() in xcall_deliver.David S. Miller2008-08-041-18/+21
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Use xcall_deliver() consistently.David S. Miller2008-08-041-23/+17
| | | | | | | There remained some spots still vectoring to the appropriate *_xcall_deliver() function manually. Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Use function pointer for cross-call sending.David S. Miller2008-08-041-6/+13
| | | | | | Initialize it using the smp_setup_processor_id() hook. Signed-off-by: David S. Miller <davem@davemloft.net>
* arch/sparc64/kernel/signal.c: removed duplicated #includeHuang Weiyi2008-08-041-1/+0
| | | | | | | | Removed duplicated #include <linux/tracehook.h> in arch/sparc64/kernel/signal.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Need to disable preemption around smp_tsb_sync().David S. Miller2008-08-041-1/+4
| | | | | | | | | Based upon a bug report by Mariusz Kozlowski It uses smp_call_function_masked() now, which has a preemption-disabled requirement. Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Do not clobber %g7 in setcontext() trap.David S. Miller2008-07-311-2/+4
| | | | | | | | | That's the userland thread register, so we should never try to change it like this. Based upon glibc bug nptl/6577 and suggestions by Jakub Jelinek. Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Kill __show_regs().David S. Miller2008-07-313-28/+3
| | | | | | | | | | | | | | | The story is that what we used to do when we actually used smp_report_regs() is that if you specifically only wanted to have the current cpu's registers dumped you would call "__show_regs()" otherwise you would call show_regs() which also invoked smp_report_regs(). Now that we killed off smp_report_regs() there is no longer any reason to have these two routines, just show_regs() is sufficient. Also kill off a stray declaration of show_regs() in sparc64_ksym.c Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Kill smp_report_regs().David S. Miller2008-07-314-56/+0
| | | | | | | | All the call sites are #if 0'd out and we have a much more useful global cpu dumping facility these days. smp_report_regs() is way too verbose to be usable. Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Kill VERBOSE_SHOWREGS code.David S. Miller2008-07-311-35/+0
| | | | | | | It just clutters everything up and even though I wrote that hack I can't remember having used it in the last 5 years or so. Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Hook up trigger_all_cpu_backtrace().David S. Miller2008-07-301-2/+8
| | | | | | | We already have code that does this, but it is only currently attached to sysrq-'y'. Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Make global reg dumping even more useful.David S. Miller2008-07-302-7/+36
| | | | | | | | | | Record one more level of stack frame program counter. Particularly when lockdep and all sorts of spinlock debugging is enabled, figuring out the caller of spin_lock() is difficult when the cpu is stuck on the lock. Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Kill isa_bus_type.David S. Miller2008-07-291-5/+0
| | | | | | | I forgot to delete this when I removed the ISA bus layer from the sparc ports. Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: Fix global reg snapshotting on self-cpu.David S. Miller2008-07-281-1/+1
| | | | | | | We were picking %i7 out of the wrong register window stack slot. Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: tracehook: CONFIG_HAVE_ARCH_TRACEHOOKRoland McGrath2008-07-271-0/+1
| | | | | | The sparc64 arch code has all the prerequisites, so set HAVE_ARCH_TRACEHOOK. Signed-off-by: Roland McGrath <roland@redhat.com>
* sparc64: tracehook_signal_handlerRoland McGrath2008-07-272-0/+6
| | | | | | | Call the standard hook after setting up signal handlers. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc64: tracehook: TIF_NOTIFY_RESUMERoland McGrath2008-07-272-3/+8
| | | | | | | This adds TIF_NOTIFY_RESUME support for sparc64. When set, we call tracehook_notify_resume() on the way to user mode. Signed-off-by: Roland McGrath <roland@redhat.com>
* sparc64: tracehook syscallRoland McGrath2008-07-273-22/+17
| | | | | | | | | | | | This changes sparc64 syscall tracing to use the new tracehook.h entry points. [ Add assembly changes to force an immediate -ENOSYS return from the system call when syscall_trace() returns non-zero at syscall entry. -DaveM ] Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc, sparc64: use arch/sparc/includeSam Ravnborg2008-07-271-1/+1
| | | | | | | | | | | | | | | | | | | | | The majority of this patch was created by the following script: *** ASM=arch/sparc/include/asm mkdir -p $ASM git mv include/asm-sparc64/ftrace.h $ASM git rm include/asm-sparc64/* git mv include/asm-sparc/* $ASM sed -ie 's/asm-sparc64/asm/g' $ASM/* sed -ie 's/asm-sparc/asm/g' $ASM/* *** The rest was an update of the top-level Makefile to use sparc for header files when sparc64 is being build. And a small fixlet to pick up the correct unistd.h from sparc64 code. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* sparc64: use generic show_mem()Johannes Weiner2008-07-261-45/+0
| | | | | | | | | | | | | | | | | | | Remove arch-specific show_mem() in favor of the generic version. This also removes the following redundant information display: - free swap pages, printed by show_swap_cache_info() - pages in swapcache, printed by show_swap_cache_info() - dirty pages, writeback pages, mapped pages, slab pages, pagetables pages, printed by show_free_areas() where show_mem() calls show_free_areas(), which calls show_swap_cache_info(). Signed-off-by: Johannes Weiner <hannes@saeurebad.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds2008-07-251-2/+4
|\ | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc: Wire up new system calls.
| * sparc: Wire up new system calls.David S. Miller2008-07-251-2/+4
| | | | | | | | | | | | | | This wires up the recently added Wire up signalfd4, eventfd2, epoll_create1, dup3, pipe2, and inotify_init1 system calls. Signed-off-by: David S. Miller <davem@davemloft.net>
* | kprobes: improve kretprobe scalability with hashed lockingSrinivasa D S2008-07-251-6/+5
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'timers-fixes-for-linus' of ↵Linus Torvalds2008-07-241-1/+1
|\ | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: nohz: adjust tick_nohz_stop_sched_tick() call of s390 as well nohz: prevent tick stop outside of the idle loop
| * Merge branch 'linus' into timers/nohzIngo Molnar2008-07-1811-18/+169
| |\
| * | nohz: prevent tick stop outside of the idle loopThomas Gleixner2008-07-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Jack Ren and Eric Miao tracked down the following long standing problem in the NOHZ code: scheduler switch to idle task enable interrupts Window starts here ----> interrupt happens (does not set NEED_RESCHED) irq_exit() stops the tick ----> interrupt happens (does set NEED_RESCHED) return from schedule() cpu_idle(): preempt_disable(); Window ends here The interrupts can happen at any point inside the race window. The first interrupt stops the tick, the second one causes the scheduler to rerun and switch away from idle again and we end up with the tick disabled. The fact that it needs two interrupts where the first one does not set NEED_RESCHED and the second one does made the bug obscure and extremly hard to reproduce and analyse. Kudos to Jack and Eric. Solution: Limit the NOHZ functionality to the idle loop to make sure that we can not run into such a situation ever again. cpu_idle() { preempt_disable(); while(1) { tick_nohz_stop_sched_tick(1); <- tell NOHZ code that we are in the idle loop while (!need_resched()) halt(); tick_nohz_restart_sched_tick(); <- disables NOHZ mode preempt_enable_no_resched(); schedule(); preempt_disable(); } } In hindsight we should have done this forever, but ... /me grabs a large brown paperbag. Debugged-by: Jack Ren <jack.ren@marvell.com>, Debugged-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds2008-07-243-25/+38
|\ \ \ | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix cpufreq notifier registry. sparc64: Fix lockdep issues in LDC protocol layer.
| * | | sparc64: Fix cpufreq notifier registry.David S. Miller2008-07-231-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based upon a report by Daniel Smolik. We do it too early, which triggers a BUG in cpufreq_register_notifier(). Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | sparc64: Fix lockdep issues in LDC protocol layer.David S. Miller2008-07-222-20/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We're calling request_irq() with a IRQs disabled. No straightforward fix exists because we want to enable these IRQs and setup state atomically before getting into the IRQ handler the first time. What happens now is that we mark the VIRQ to not be automatically enabled by request_irq(). Then we make explicit enable_irq() calls when we grab the LDC channel. This way we don't need to call request_irq() illegally under the LDC channel lock any more. Bump LDC version and release date. Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | flag parameters: pipeUlrich Drepper2008-07-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces the new syscall pipe2 which is like pipe but it also takes an additional parameter which takes a flag value. This patch implements the handling of O_CLOEXEC for the flag. I did not add support for the new syscall for the architectures which have a special sys_pipe implementation. I think the maintainers of those archs have the chance to go with the unified implementation but that's up to them. The implementation introduces do_pipe_flags. I did that instead of changing all callers of do_pipe because some of the callers are written in assembler. I would probably screw up changing the assembly code. To avoid breaking code do_pipe is now a small wrapper around do_pipe_flags. Once all callers are changed over to do_pipe_flags the old do_pipe function can be removed. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_pipe2 # ifdef __x86_64__ # define __NR_pipe2 293 # elif defined __i386__ # define __NR_pipe2 331 # else # error "need __NR_pipe2" # endif #endif int main (void) { int fd[2]; if (syscall (__NR_pipe2, fd, 0) != 0) { puts ("pipe2(0) failed"); return 1; } for (int i = 0; i < 2; ++i) { int coe = fcntl (fd[i], F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { printf ("pipe2(0) set close-on-exit for fd[%d]\n", i); return 1; } } close (fd[0]); close (fd[1]); if (syscall (__NR_pipe2, fd, O_CLOEXEC) != 0) { puts ("pipe2(O_CLOEXEC) failed"); return 1; } for (int i = 0; i < 2; ++i) { int coe = fcntl (fd[i], F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { printf ("pipe2(O_CLOEXEC) does not set close-on-exit for fd[%d]\n", i); return 1; } } close (fd[0]); close (fd[1]); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OpenPOWER on IntegriCloud