summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms/maple
Commit message (Collapse)AuthorAgeFilesLines
* powerpc/maple: Move controller ops from ppc_md to controller_opsDaniel Axtens2015-04-113-1/+7
| | | | | | | | This moves the Maple platform to use the pci_controller_ops structure rather than ppc_md for PCI controller operations. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc: dart_iommu: optionally populate controller_ops on initDaniel Axtens2015-04-111-1/+1
| | | | | | | | | | | | | | | | If a pci_controller_ops struct is provided to iommu_init_early_dart, populate that with the DMA setup ops, rather than ppc_md. If NULL is provided, populate ppc_md as before. This also patches the call sites for Maple and Power Mac to pass NULL, so existing behaviour is preserved. The benefit of making this optional is that it means we don't have to change dart, Maple and Power Mac over to the controller_ops system in one fell swoop. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc: Remove superfluous bootmem includesAnton Blanchard2014-11-101-1/+0
| | | | | | | | Lots of places included bootmem.h even when not using bootmem. Signed-off-by: Anton Blanchard <anton@samba.org> Tested-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc: Convert power off logic to pm_power_offAlexander Graf2014-11-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The generic Linux framework to power off the machine is a function pointer called pm_power_off. The trick about this pointer is that device drivers can potentially implement it rather than board files. Today on powerpc we set pm_power_off to invoke our generic full machine power off logic which then calls ppc_md.power_off to invoke machine specific power off. However, when we want to add a power off GPIO via the "gpio-poweroff" driver, this card house falls apart. That driver only registers itself if pm_power_off is NULL to ensure it doesn't override board specific logic. However, since we always set pm_power_off to the generic power off logic (which will just not power off the machine if no ppc_md.power_off call is implemented), we can't implement power off via the generic GPIO power off driver. To fix this up, let's get rid of the ppc_md.power_off logic and just always use pm_power_off as was intended. Then individual drivers such as the GPIO power off driver can implement power off logic via that function pointer. With this patch set applied and a few patches on top of QEMU that implement a power off GPIO on the virt e500 machine, I can successfully turn off my virtual machine after halt. Signed-off-by: Alexander Graf <agraf@suse.de> [mpe: Squash into one patch and update changelog based on cover letter] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* POWERPC: drivers: remove __dev* attributes.Greg Kroah-Hartman2013-01-031-2/+2
| | | | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'split-asm_system_h-for-linus-20120328' of ↵Linus Torvalds2012-03-282-2/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system Pull "Disintegrate and delete asm/system.h" from David Howells: "Here are a bunch of patches to disintegrate asm/system.h into a set of separate bits to relieve the problem of circular inclusion dependencies. I've built all the working defconfigs from all the arches that I can and made sure that they don't break. The reason for these patches is that I recently encountered a circular dependency problem that came about when I produced some patches to optimise get_order() by rewriting it to use ilog2(). This uses bitops - and on the SH arch asm/bitops.h drags in asm-generic/get_order.h by a circuituous route involving asm/system.h. The main difficulty seems to be asm/system.h. It holds a number of low level bits with no/few dependencies that are commonly used (eg. memory barriers) and a number of bits with more dependencies that aren't used in many places (eg. switch_to()). These patches break asm/system.h up into the following core pieces: (1) asm/barrier.h Move memory barriers here. This already done for MIPS and Alpha. (2) asm/switch_to.h Move switch_to() and related stuff here. (3) asm/exec.h Move arch_align_stack() here. Other process execution related bits could perhaps go here from asm/processor.h. (4) asm/cmpxchg.h Move xchg() and cmpxchg() here as they're full word atomic ops and frequently used by atomic_xchg() and atomic_cmpxchg(). (5) asm/bug.h Move die() and related bits. (6) asm/auxvec.h Move AT_VECTOR_SIZE_ARCH here. Other arch headers are created as needed on a per-arch basis." Fixed up some conflicts from other header file cleanups and moving code around that has happened in the meantime, so David's testing is somewhat weakened by that. We'll find out anything that got broken and fix it.. * tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits) Delete all instances of asm/system.h Remove all #inclusions of asm/system.h Add #includes needed to permit the removal of asm/system.h Move all declarations of free_initmem() to linux/mm.h Disintegrate asm/system.h for OpenRISC Split arch_align_stack() out from asm-generic/system.h Split the switch_to() wrapper out of asm-generic/system.h Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h Create asm-generic/barrier.h Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h Disintegrate asm/system.h for Xtensa Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt] Disintegrate asm/system.h for Tile Disintegrate asm/system.h for Sparc Disintegrate asm/system.h for SH Disintegrate asm/system.h for Score Disintegrate asm/system.h for S390 Disintegrate asm/system.h for PowerPC Disintegrate asm/system.h for PA-RISC Disintegrate asm/system.h for MN10300 ...
| * Disintegrate asm/system.h for PowerPCDavid Howells2012-03-282-2/+0
| | | | | | | | | | | | | | | | Disintegrate asm/system.h for PowerPC. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> cc: linuxppc-dev@lists.ozlabs.org
* | Merge branch 'linux-next' of ↵Linus Torvalds2012-03-231-1/+1
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci Pull PCI changes (including maintainer change) from Jesse Barnes: "This pull has some good cleanups from Bjorn and Yinghai, as well as some more code from Yinghai to better handle resource re-allocation when enabled. There's also a new initcall_debug feature from Arjan which will print out quirk timing information to help identify slow quirks for fixing or refinement (Yinghai sent in a few patches to do just that once the new debug code landed). Beyond that, I'm handing off PCI maintainership to Bjorn Helgaas. He's been a core PCI and Linux contributor for some time now, and has kindly volunteered to take over. I just don't feel I have the time for PCI review and work that it deserves lately (I've taken on some other projects), and haven't been as responsive lately as I'd like, so I approached Bjorn asking if he'd like to manage things. He's going to give it a try, and I'm confident he'll do at least as well as I have in keeping the tree managed, patches flowing, and keeping things stable." Fix up some fairly trivial conflicts due to other cleanups (mips device resource fixup cleanups clashing with list handling cleanup, ppc iseries removal clashing with pci_probe_only cleanup etc) * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (112 commits) PCI: Bjorn gets PCI hotplug too PCI: hand PCI maintenance over to Bjorn Helgaas unicore32/PCI: move <asm-generic/pci-bridge.h> include to asm/pci.h sparc/PCI: convert devtree and arch-probed bus addresses to resource powerpc/PCI: allow reallocation on PA Semi powerpc/PCI: convert devtree bus addresses to resource powerpc/PCI: compute I/O space bus-to-resource offset consistently arm/PCI: don't export pci_flags PCI: fix bridge I/O window bus-to-resource conversion x86/PCI: add spinlock held check to 'pcibios_fwaddrmap_lookup()' PCI / PCIe: Introduce command line option to disable ARI PCI: make acpihp use __pci_remove_bus_device instead PCI: export __pci_remove_bus_device PCI: Rename pci_remove_behind_bridge to pci_stop_and_remove_behind_bridge PCI: Rename pci_remove_bus_device to pci_stop_and_remove_bus_device PCI: print out PCI device info along with duration PCI: Move "pci reassigndev resource alignment" out of quirks.c PCI: Use class for quirk for usb host controller fixup PCI: Use class for quirk for ti816x class fixup PCI: Use class for quirk for intel e100 interrupt fixup ...
| * powerpc/PCI: replace pci_probe_only with pci_flagsBjorn Helgaas2012-02-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | We already use pci_flags, so this just sets pci_flags directly and removes the intermediate step of figuring out pci_probe_only, then using it to set pci_flags. The PCI core provides a pci_flags definition (currently __weak), so drop the powerpc definitions in favor of that. CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: linuxppc-dev@lists.ozlabs.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | powerpc/mpic: Remove duplicate MPIC_WANTS_RESET flagKyle Moffett2012-02-231-1/+1
|/ | | | | | | | | | | | | | | | | There are two separate flags controlling whether or not the MPIC is reset during initialization, which is completely unnecessary, and only one of them can be specified in the device tree. Also, most platforms in-tree right now do actually want to reset the MPIC during initialization anyways, which means lots of duplicate code passing the MPIC_WANTS_RESET flag. Fix all of the callers which currently do not pass the MPIC_WANTS_RESET flag to pass the MPIC_NO_RESET flag, then remove the MPIC_WANTS_RESET flag and make the code reset the MPIC by default. Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/mpic: Invert the meaning of MPIC_PRIMARYKyle Moffett2011-12-071-1/+1
| | | | | | | | | | It turns out that there are only 2 in-tree platforms which use MPICs which are not "primary": IBM Cell and PowerMac. To reduce the complexity of the typical board setup code, invert the MPIC_PRIMARY bit into MPIC_SECONDARY. Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/maple: Enable access to HT Host-Bridge on MapleDmitry Eremin-Solenikov2011-11-281-0/+55
| | | | | | | | CPC925/CPC945 use special window to access host bridge functionality of u3-ht. Provide a way to access this device. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: add export.h to files making use of EXPORT_SYMBOLPaul Gortmaker2011-10-311-0/+1
| | | | | | | | | With module.h being implicitly everywhere via device.h, the absence of explicitly including something for EXPORT_SYMBOL went unnoticed. Since we are heading to fix things up and clean module.h from the device.h file, we need to explicitly include these files now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* powerpc/maple: Register CPC925 EDAC device on all boards with CPC925Dmitry Eremin-Solenikov2011-06-291-22/+19
| | | | | | | | | | | Currently Maple setup code creates cpc925_edac device only on Motorola ATCA-6101 blade. Make setup code check bridge revision and enable EDAC on all U3H bridges. Verified on Momentum MapleD (ppc970fx kit) board. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Convert to new irq_* function namesThomas Gleixner2011-03-291-1/+1
| | | | | | Scripted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* powerpc/maple: Add of_node_put to avoid memory leakJulia Lawall2010-09-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a call to of_node_put in the error handling code following a call to of_find_node_by_path. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ local idexpression x; expression E,E1; statement S; @@ *x = (of_find_node_by_path |of_find_node_by_name |of_find_node_by_phandle |of_get_parent |of_get_next_parent |of_get_next_child |of_find_compatible_node |of_match_node )(...); ... if (x == NULL) S <... when != x = E *if (...) { ... when != of_node_put(x) when != if (...) { ... of_node_put(x); ... } ( return <+...x...+>; | * return ...; ) } ...> of_node_put(x); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* lmb: rename to memblockYinghai Lu2010-07-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | via following scripts FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/lmb/memblock/g' \ -e 's/LMB/MEMBLOCK/g' \ $FILES for N in $(find . -name lmb.[ch]); do M=$(echo $N | sed 's/lmb/memblock/g') mv $N $M done and remove some wrong change like lmbench and dlmb etc. also move memblock.c from lib/ to mm/ Suggested-by: Ingo Molnar <mingo@elte.hu> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* edac: cpc925 MC platform device setupHarry Ciao2009-06-181-0/+59
| | | | | | | | | | | | | | | Fix up the number of cells for the values of CPC925 Memory Controller, and setup related platform device during system booting up, against which CPC925 Memory Controller EDAC driver would be matched. Signed-off-by: Harry Ciao <qingtao.cao@windriver.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* powerpc/maple: Add a quirk to disable MSI for IPR on BiminiMichael Ellerman2009-05-221-0/+14
| | | | | | | | | Something in the HW or FW setup is busted and MSIs aren't working with IPR on Bimini, so until we figure out exaxtly what's up, we quirk them out Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/kconfig: Kill PPC_MULTIPLATFORMBenjamin Herrenschmidt2009-03-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | CONFIG_PPC_MULTIPLATFORM is a remain of the pre-powerpc days and isn't really meaningful anymore. It was basically equivalent to PPC64 || 6xx. This removes it along with the following changes: - 32-bit platforms that relied on PPC32 && PPC_MULTIPLATFORM now rely on 6xx which is what they want anyway. - A new symbol, PPC_BOOK3S, is defined that represent compliance with the "Server" variant of the architecture. This is set when either 6xx or PPC64 is set and open the door for future BOOK3E 64-bit. - 64-bit platforms that relied on PPC64 && PPC_MULTIPLATFORM now use PPC64 && PPC_BOOK3S - A separate and selectable CONFIG_PPC_OF_BOOT_TRAMPOLINE option is now used to control the use of prom_init.c Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Remove default kexec/crash_kernel ops assignmentsAnton Vorontsov2008-12-231-6/+0
| | | | | | | Default ops are implicit now. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* Merge commit 'origin'Benjamin Herrenschmidt2008-10-151-1/+0
|\ | | | | | | | | | | Manual fixup of conflicts on: arch/powerpc/include/asm/dcr-regs.h drivers/net/ibm_newemac/core.h
| * Remove asm/a.out.h files for all architectures without a.out support.Adrian Bunk2008-09-061-1/+0
| | | | | | | | | | | | | | | | | | | | This patch also includes the required removal of (unused) inclusion of <asm/a.out.h> <linux/a.out.h>'s in the arch/ code for these architectures. [dwmw2: updated for 2.6.27-rc] Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | powerpc: Use bcd2bin/bin2bcdAdrian Bunk2008-08-201-12/+12
|/ | | | | | | | This changes powerpc to use the new bcd2bin/bin2bcd functions instead of the obsolete BCD_TO_BIN/BIN_TO_BCD macros. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix sparse warnings in arch/powerpc/kernelMichael Ellerman2008-05-141-2/+0
| | | | | | | | | | | | | | | | | | Make a few things static in lparcfg.c Make init and exit routines static in rtas_flash.c Make things static in rtas_pci.c Make some functions static in rtas.c Make fops static in rtas-proc.c Remove unneeded extern for do_gtod in smp.c Make clocksource_init() static in time.c Make last_tick_len and ticklen_to_xs static in time.c Move the declaration of the pvr per-cpu into smp.h Make kexec_smp_down() and kexec_stack static in machine_kexec_64.c Don't return void in arch_teardown_msi_irqs() in msi.c Move declaration of GregorianDay()into asm/time.h Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] maple: Kill fixup_maple_ideNathan Lynch2008-03-261-47/+0
| | | | | | | | This function has been a no-op for about 18 months; it's there in the history should anyone need to resurrect it. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] maple: Use platform name in define_machine()Nathan Lynch2008-03-261-1/+1
| | | | | | | | | | | | | | | Prevailing practice for define_machine() in powerpc is to use the platform name when the platform has only one define_machine() statement, but maple uses "maple_md". This caused me some head-scratching when writing some new code that uses machine_is(maple). Use "maple" instead of "maple_md". There should not be any behavioral change -- fixup_maple_ide() calls machine_is(maple) but the body of the function is ifdef'd out. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [LIB]: Make PowerPC LMB code generic so sparc64 can use it too.David S. Miller2008-02-131-1/+1
| | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* [POWERPC] Use <linux/of_{platform, device}.h> and not <asm/...> variants.Jon Loeliger2008-01-171-1/+1
| | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Make non-PCI build work againStephen Rothwell2007-12-211-0/+1
| | | | | | | | | | | | | Maple and pasemi both require PCI as does CONFIG_OF_PLATFORM_PCI. The default setting of CONFIG_ISA_DMA_API is set to match the protection around the relevant routines in asm/dma.h. I also had to remove the PMAC platform from the combined build. The precis is that to build a 64 bit kernel with no PCI, you can only include pSeries and iSeries. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] pci_controller->arch_data really is a struct device_node *Stephen Rothwell2007-12-111-1/+1
| | | | | Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* remove asm/bitops.h includesJiri Slaby2007-10-191-1/+1
| | | | | | | | | | | | | remove asm/bitops.h includes including asm/bitops directly may cause compile errors. don't include it and include linux/bitops instead. next patch will deny including asm header directly. Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [POWERPC] maple pci_ops: Use named structure member initializersNathan Lynch2007-08-171-6/+6
| | | | | Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Remove gratuitous reads from maple PCI config space methodsNathan Lynch2007-08-171-9/+0
| | | | | | | | | | | | | | | | | | | | The maple PCI configuration space write methods read the written location immediately after the write is performed, presumably in order to flush the write. However, configuration space writes are not allowed to be posted, making these reads gratuitous. Furthermore, this behavior potentially causes us to violate the PCI PM spec when changing between e.g. D0 and D3 states, because a delay of up to 10ms may be required before the OS accesses configuration space after the write which initiates the transition. It definitely causes a system hang for me with a Broadcom 5721 PCIE network adapter, which is fixed by this change. Therefore this removes the gratuitous reads from u3_agp_write_config, u3_ht_write_config, and u4_pcie_write_config. Signed-off-by: Nathan Lynch <ntl@pobox.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix Maple platform ISA busBenjamin Herrenschmidt2007-07-261-0/+3
| | | | | | | | | | The Maple platform has ISA IOs but didn't call the new functions to actually map those, thus crashing when trying to access the nvram. This fixes Maple and JS2x using SLOF. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] rename add_bridge to avoid namespace clashesArnd Bergmann2007-06-291-3/+3
| | | | | | | | | Many platforms currently define their own add_bridge function, some of them globally. This breaks some multiplatform configurations. Prefixing each of these functions with the platform name avoids this problem. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* [POWERPC] Rewrite IO allocation & mapping on powerpc64Benjamin Herrenschmidt2007-06-141-35/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Rename device_is_compatible to of_device_is_compatibleStephen Rothwell2007-05-072-7/+7
| | | | | | | | | | | for consistency with other Open Firmware interfaces (and Sparc). This is just a straight replacement. This leaves the compatibility define in place. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Rename MPIC_BROKEN_U3 to MPIC_U3_HT_IRQSMichael Ellerman2007-04-242-2/+2
| | | | | | | | | Rename MPIC_BROKEN_U3 to something a little more descriptive. Its effect is to enable support for HT irqs behind the PCI-X/HT bridge on U3/U4 (aka. CPC9x5) parts. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Rename get_property to of_get_property: arch/powerpcStephen Rothwell2007-04-132-9/+9
| | | | | | Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Make struct property's value a void *Stephen Rothwell2007-04-131-1/+1
| | | | | Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Rename prom_n_addr_cells to of_n_addr_cellsStephen Rothwell2007-04-131-1/+1
| | | | | | | This is more consistent and gets us closer to the Sparc code. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Remove unused inclusion of linux/ide.hOlaf Hering2007-04-131-1/+0
| | | | | | | | | | | | | Remove unneeded inclusion of linux/ide.h It does not compile with CONFIG_BLOCK=n. Remove asm/ide.h from ksyms file, it gets included earlier via linux/ide.h. Compile tested with all defconfig files. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Split several platforms into their respective Kconfig fileKumar Gala2007-03-221-0/+17
| | | | | | | Moved pseries, iseries, chrp, prep, maple and pasemi into their respective arch/powerpc/platform/*/Kconfig files out of arch/powerpc/Kconfig Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Maple: use mmio nvramNathan Lynch2007-02-071-0/+3
| | | | | | | | | | | | | | Some systems supported by the maple platform (e.g. JS2x blades running SLOF) are able to use the mmio_nvram backend for reading and writing nvram. This is an improvement over the current situation -- no nvram access from userspace at all. Select MMIO_NVRAM for the maple platform. Initialize the mmio_nvram backend from maple setup code. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Maple: don't override bus-range supplied by firmwareNathan Lynch2007-02-071-8/+0
| | | | | | | | This workaround was copy-pasted from the powermac code. It's not necessary for maple. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] maple: improve CPC9x5 host bridge detectionNathan Lynch2007-01-241-6/+9
| | | | | | | | | | Identify CPC9x5 PCI Express, AGP, and HT host bridges using device_type and compatible properties, which is a more flexible method than using the name property (which can differ between firmwares and models). Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix unbalanced uses of of_node_putNathan Lynch2007-01-091-1/+0
| | | | | | | | | | The (maple|pasemi)_init_IRQ functions call of_node_put(root) once more than they should, causing the refcount of the root node to underflow, which triggers the WARN_ON in kref_get. Signed-off-by: Nathan Lynch <ntl@pobox.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] maple: Use RTAS for reboot and haltNathan Lynch2006-12-081-0/+12
| | | | | | | | On maple, use the RTAS "system-reboot" and "power-off" methods if they are available. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
OpenPOWER on IntegriCloud