summaryrefslogtreecommitdiffstats
path: root/arch/arm/mm/proc-v7.S
Commit message (Collapse)AuthorAgeFilesLines
* ARM: 5888/1: arm: Update comments in cacheflush.h and remove unnecessary V6 ↵Tony Lindgren2010-01-191-2/+0
| | | | | | | | | | | and V7 comments The comments in cacheflush.h should follow what's in struct cpu_cache_fns. The comments for V6 and V7 are unnecessary. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 5886/1: arm: Fix cpu_proc_fin() for proc-v7.S and make kexec workTony Lindgren2010-01-191-1/+8
| | | | | | | | | | | | | | | | | | The comments in arm_machine_restart() suggest that cpu_proc_fin() will clean and disable cache and turn off interrupts. This does not seem to be implemented for proc-v7.S, implement it the same way as for proc-v6.S. This also makes kexec work for v7. Note that a related TLB and branch traget flush patch is also needed to avoid kexec "crc error". Note that there are still some issues that seem to be related to L2 cache being on and causing occasional uncompress "crc error" with kexec. Anyways, this gets kexec mostly working on V7 for now. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARMv7: Check whether the SMP/nAMP mode was already enabledTony Thompson2009-11-041-3/+4
| | | | | | | | If running in non-secure mode, enabling this register will fault. Signed-off-by: Tony Thompson <Anthony.Thompson@arm.com> Acked-by: Srinidhi Kasagar <srinidhikasagar@gmail.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* ARM: ensure initial page tables are setup for SMP systemsRussell King2009-11-021-3/+4
| | | | | | | | | | | | | | | | | Mapping the same memory using two different attributes (memory type, shareability, cacheability) is unpredictable. During boot, we encounter a situation when we're updating the kernel's page tables which can lead to dirty cache lines existing in the cache which are subsequently missed. This causes stack corruption, and therefore a crash. Therefore, ensure that the shared and cacheability settings matches the configuration that will be used later; this together with the restriction in early_cachepolicy() ensures that we won't create a mismatch during boot. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 5727/1: Pass IFSR register to do_PrefetchAbort()Kirill A. Shutemov2009-10-021-1/+1
| | | | | | | | | | | | | | | | | Instruction fault status register, IFSR, was introduced on ARMv6 to provide status information about the last insturction fault. It needed for proper prefetch abort handling. Now we have three prefetch abort model: * legacy - for CPUs before ARMv6. They doesn't provide neither IFSR nor IFAR. We simulate IFSR with section translation fault status for them to generalize code; * ARMv6 - provides IFSR, but not IFAR; * ARMv7 - provides both IFSR and IFAR. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* nommu: Do not set PRRR and NMRR in proc-v7.S if !MMUCatalin Marinas2009-07-241-1/+1
| | | | | | ARMv7-R profile CPUs do not have these registers. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* Thumb-2: Implement the unified arch/arm/mm supportCatalin Marinas2009-07-241-1/+4
| | | | | | | This patch adds the ARM/Thumb-2 unified support to the arch/arm/mm/* files. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2009-06-141-11/+48
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits) MAINTAINERS: EB110ATX is not ebsa110 MAINTAINERS: update Eric Miao's email address and status fb: add support of LCD display controller on pxa168/910 (base layer) [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines [ARM] 5544/1: Trust PrimeCell resource sizes [ARM] pxa/sharpsl_pm: cleanup of gpio-related code. [ARM] pxa/sharpsl_pm: drop set_irq_type calls [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific [ARM] sa1100: remove unused collie_pm.c [ARM] pxa: fix the conflicting non-static declarations of global_gpios[] [ARM] 5550/1: Add default configure file for w90p910 platform [ARM] 5549/1: Add clock api for w90p910 platform. [ARM] 5548/1: Add gpio api for w90p910 platform [ARM] 5551/1: Add multi-function pin api for w90p910 platform. [ARM] Make ARM_VIC_NR depend on ARM_VIC [ARM] 5546/1: ARM PL022 SSP/SPI driver v3 ARM: OMAP4: SMP: Update defconfig for OMAP4430 ARM: OMAP4: SMP: Enable SMP support for OMAP4430 ...
| * Add core support for ARMv6/v7 big-endianCatalin Marinas2009-05-301-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Starting with ARMv6, the CPUs support the BE-8 variant of big-endian (byte-invariant). This patch adds the core support: - setting of the BE-8 mode via the CPSR.E register for both kernel and user threads - big-endian page table walking - REV used to rotate instructions read from memory during fault processing as they are still little-endian format - Kconfig and Makefile support for BE-8. The --be8 option must be passed to the final linking stage to convert the instructions to little-endian Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * ARMv7: Document the PRRR and NMRR registers settingCatalin Marinas2009-05-301-2/+30
| | | | | | | | | | | | | | | | | | This patch adds a comment to the proc-v7.S file for the setting of the PRRR and NMRR registers. It also sets the PRRR[13:12] bits to 0 (corresponding to the reserved TEX[0]CB encoding 110) to be consistent with the documentation. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * ARMv7: Enable the SWP instructionCatalin Marinas2009-05-301-4/+4
| | | | | | | | | | | | | | | | | | | | | | The SWP instruction has been deprecated starting with the ARMv6 architecture. On ARMv7 processors with the multiprocessor extensions (like Cortex-A9), this instruction is disabled by default but it can be enabled by setting bit 10 in the System Control register. Note that setting this bit is safe even if the ARMv7 processor has the SWP instruction enabled by default. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * ARMv7: Mark the PTWs inner WBWA on SMP and WB on UPTony Thompson2009-05-301-3/+9
| | | | | | | | | | | | | | | | | | | | There are additional bits to set for the ARMv7 SMP extensions in the TTBR registers. The IRGN bits order is counter-intuitive but it allows software built for the ARMv7 base architecture to run on an implementation with the MP extensions. Signed-off-by: Tony Thompson <Anthony.Thompson@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * Check whether the TLB operations need broadcasting on SMP systemsCatalin Marinas2009-05-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | ARMv7 SMP hardware can handle the TLB maintenance operations broadcasting in hardware so that the software can avoid the costly IPIs. This patch adds the necessary checks (the MMFR3 CPUID register) to avoid the broadcasting if already supported by the hardware. (this patch is based on the work done by Tony Thompson @ ARM) Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* | [ARM] ARMv7 errata: only apply fixes when running on applicable CPURussell King2009-06-021-11/+25
|/ | | | | | | | | | | | | | | | | Currently, whenever an erratum workaround is enabled, it will be applied whether or not the erratum is relevent for the CPU. This patch changes this - we check the variant and revision fields in the main ID register to determine which errata to apply. We also avoid re-applying erratum 460075 if it has already been applied. Applying this fix in non-secure mode results in the kernel failing to boot (or even do anything.) This fixes booting on some ARMv7 based platforms which otherwise silently fail. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2009-05-021-0/+19
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: (45 commits) [ARM] 5489/1: ARM errata: Data written to the L2 cache can be overwritten with stale data [ARM] 5490/1: ARM errata: Processor deadlock when a false hazard is created [ARM] 5487/1: ARM errata: Stale prediction on replaced interworking branch [ARM] 5488/1: ARM errata: Invalidation of the Instruction Cache operation can fail davinci: DM644x: NAND: update partitioning davinci: update DM644x support in preparation for more SoCs davinci: DM644x: rename board file davinci: update pin-multiplexing support davinci: serial: generalize for more SoCs davinci: DM355 IRQ Definitions davinci: DM646x: add interrupt number and priorities davinci: PSC: Clear bits in MDCTL reg before setting new bits davinci: gpio bugfixes davinci: add EDMA driver davinci: timers: use clk_get_rate() [ARM] pxa/littleton: add missing da9034 touchscreen support [ARM] pxa/zylonite: configure GPIO18/19 correctly, used by 2 GPIO expanders [ARM] pxa/zylonite: fix the issue of unused SDATA_IN_1 pin get AC97 not working [ARM] pxa: make ads7846 on corgi and spitz to sync on HSYNC [ARM] pxa: remove unused CPU_FREQ_PXA Kconfig symbol ...
| * [ARM] 5489/1: ARM errata: Data written to the L2 cache can be overwritten ↵Catalin Marinas2009-04-301-0/+5
| | | | | | | | | | | | | | | | | | | | | | with stale data This patch is a workaround for the 460075 Cortex-A8 (r2p0) erratum. It configures the L2 cache auxiliary control register so that the Write Allocate mode for the L2 cache is disabled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] 5490/1: ARM errata: Processor deadlock when a false hazard is createdCatalin Marinas2009-04-301-0/+6
| | | | | | | | | | | | | | | | | | This patch adds a workaround for the 458693 Cortex-A8 (r2p0) erratum. It sets the corresponding bits in the auxiliary control register so that the PLD instruction becomes a NOP. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] 5487/1: ARM errata: Stale prediction on replaced interworking branchCatalin Marinas2009-04-301-0/+8
| | | | | | | | | | | | | | | | This patch adds the workaround for the 430973 Cortex-A8 (r1p0..r1p2) erratum. The BTAC/BTB is now flushed at every context switch. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | arm: Use __INIT macro instead of .text.init.Tim Abbott2009-04-271-1/+2
|/ | | | | | | | | | | | | arm is placing some code in the .text.init section, but it does not reference that section in its linker scripts. This change moves this code from the .text.init section to the .init.text section, which is presumably where it belongs. Signed-off-by: Tim Abbott <tabbott@mit.edu> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'for-rmk' of git://linux-arm.org/linux-2.6 into develRussell King2008-11-271-3/+16
|\
| * Modern processors may need to drain the WB before WFICatalin Marinas2008-11-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Since WFI may cause the processor to enter a low-power mode, data may still be in the write buffer. This patch adds a DSB (or DWB) to the cpu_(v6|v7)_do_idle functions before the WFI. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * ARMv7: Add SMP initialisation to proc-v7.SJon Callan2008-11-061-2/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the SMP/nAMP mode setting to __v7_setup and also sets TTBR to shared page table walks if SMP is enabled. The PTWs are also marked inner cacheable for both SMP and UP modes (setting this is fine even if the CPU doesn't support the feature). Signed-off-by: Jon Callan <Jon.Callan@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * ARMv7: Do not set TTBR0 in __v7_setupCatalin Marinas2008-11-061-1/+0
| | | | | | | | | | | | | | | | | | | | This register is set in __enable_mmu in the head.S file. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* | [ARM] mm: fix page table initializationRussell King2008-11-061-6/+6
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | As a result of the ptebits changes, we ended up marking device mappings as normal memory on ARMv7 CPUs, resulting in undesirable behaviour with serial ports and the like. While reviewing the section mapping table entries, other errors in the memory type settings for devices were detected and confirmed to prevent Xscale3 platforms booting. Tested on: OMAP34xx (ARMv7), OMAP24xx (ARMv6), OMAP16xx (ARM926T, ARMv5), PXA311 (Xscale3), PXA272 (Xscale), PXA255 (Xscale), IXP42x (Xscale), S3C2410 (ARM920T, ARMv4T), ARM720T (ARMv4T) StrongARM-110 (ARMv4) Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Tested-by: Mike Rapoport <mike@compulab.co.il> Tested-by: Ben Dooks <ben-linux@fluff.org> Tested-by: Anders Grafström <grfstrm@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 5318/1: Swap the PRRR and NMRR values in proc-v7.SCatalin Marinas2008-10-221-2/+2
| | | | | | | | A typo caused these values to be swapped leading to incorrect memory type attributes. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge branch 'ptebits' into develRussell King2008-10-091-17/+12
|\ | | | | | | | | | | Conflicts: arch/arm/Kconfig
| * [ARM] Don't include asm/elf.h in asm codeRussell King2008-10-011-1/+1
| | | | | | | | | | | | asm code really wants asm/hwcap.h, so include that instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] Convert ARMv7 to use TEX remappingRussell King2008-10-011-4/+33
| | | | | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] Convert ARMv6 and ARMv7 to use new memory typesRussell King2008-10-011-1/+3
| | | | | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] Convert set_pte_ext implementions to macrosRussell King2008-10-011-37/+1
| | | | | | | | | | | | | | There are actually only four separate implementations of set_pte_ext. Use assembler macros to insert code for these into the proc-*.S files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | [ARM] 5229/3: Replace some ARMv7 opcodes with the instruction nameCatalin Marinas2008-10-031-1/+1
| | | | | | | | | | | | | | | | | | These instructions were placed in the code directly as opcodes because early compilers didn't support them. Toolchains supporting ARMv7 understand these instructions and the patch puts the mnemonics back. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | [ARM] 5227/1: Add the ENDPROC declarations to the .S filesCatalin Marinas2008-09-011-0/+8
|/ | | | | | | | | This declaration specifies the "function" type and size for various assembly functions, mainly needed for generating the correct branch instructions in Thumb-2. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] fix 48d7927bdf071d05cf5d15b816cf06b0937cb84fCatalin Marinas2008-04-241-1/+1
| | | | | | | | | | The proc-*.S files have the _prefetch_abort pointer placed at the end of the processor structure but the cpu-multi32.h defines it in the second position. The patch also fixes the support for XSC3 and the MMU-less CPUs (740, 7tdmi, 940, 946 and 9tdmi). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Add a prefetch abort handlerPaul Brook2008-04-181-0/+1
| | | | | | | | | This patch adds a prefetch abort handler similar to the data abort one and renames the latter for consistency. Initial implementation by Paul Brook with some renaming by Catalin Marinas. Signed-off-by: Paul Brook <paul@codesourcery.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* [ARM] 4503/1: nommu: Add noMMU support for ARMv7Catalin Marinas2007-07-201-11/+14
| | | | | | | | This patch adds the necessary ifdef's to the proc-v7.S code and defines the v7wbi_tlb_fns macro in pgtable-nommu.h Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4498/1: ARMv7: Remove the L2 cache configuration via the aux ctrl registerCatalin Marinas2007-07-201-10/+0
| | | | | | | | | The auxiliary control and the L2 auxiliary control registers are Cortex-A8 specific. They need to be removed from the generic ARMv7 support code. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4394/1: ARMv7: Add the TLB range operationsCatalin Marinas2007-05-301-1/+1
| | | | | | | | | We are currently using the ARMv6 operations but need to duplicate some of the code because of the introduction of the new CPU barrier instructions in ARMv7. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] armv7: add support for ARMv7 cores.Catalin Marinas2007-05-081-0/+262
This patch adds support for the ARMv7 cores. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
OpenPOWER on IntegriCloud