| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
PMU_GPIOINT_WAKEUP_EN seems needed when entering the shallow suspend
(with logic staying on) but does not seem to be needed for the deep
suspend for unknown reasons.
Testing revealed that this setting really is necessary to reliably
resume the veyron devices from suspend.
Reported-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently the stabilization thresholds for the oscillator and external pmu
are statically set to 30ms based on a 32kHz clock rate. This leaves out the
case when we don't switch to the 32kHz clock when only entering the shallow
suspend mode where the logic keeps running.
So, set the correct threshold after we have determined if we switch to the
32kHz clock or stay with the 24MHz one. Also set the oscillator-
stabilization to 0 if it is kept running during suspend, as it of course
does not need to stabilize then.
Reported-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
|
| |
|
|
|
|
|
|
|
| |
These are actually not used in the pm code, as we moved suspend handling
to the clock driver, remove them here.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
This reverts commit b403125d3bbf8046c1186e1a49cb17bb5551db14.
As reported by Chris, both commits
b403125 "ARM: rockchip: fix undefined instruction of reset_ctrl_regs"
0ea001d "ARM: rockchip: disable dapswjdp during suspend"
actually fix the same issue and b403125 is the older one, which got
superseded by 0ea001d. Therefore revert the obsolete one again.
Reported-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Sometimes the debug module may not work well after resume, since it has
not been correctly reset when wakeup from suspend. That cause system
crash during reusme, and a 'undefined instruction' is displayed on the
console. Set the GRF_FORCE_JTAG bit of RK3288_GRF_SOC_CON0 can ensure
that debug modul is reset. And we can change the value of
RK3288_GRF_SOC_CON0 back when system resume.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
According to discussions, there does not seem a better solution available.
Please also see the potential security implication described in the
comment inline in the code.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Reset dapswjdp is controlled by JTAG_TRSTN, if the iomux of this pin is
not "jtag_trstn". the AP would think this pin is always high, so it can
not reset before resume. When system resume, but the dapswjdp is not in
a default state, it may Access some illegal address, it cause system
crash during resume.
Let's disable this jtag function by clear the dapdeviceen bit, it
prohibit the dapswjdp to access memory and registers. This bit would
be enable in MASKROM, so we need clear it in suspend everytime.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The watchdog clock should be disable in dw_wdt_suspend, but we set a
dummy clock to watchdog for rk3288. So the watchdog will continue to
work during suspend. And we switch the system clock to 32khz from 24Mhz,
during suspend, so the watchdog timer over count will increase to
755 times, about 12.5 hours, the original value is 60 seconds. So
watchdog will reset the system over a night, but voltage are all
incorrect, then it hang on reset.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Daniel Kurtz <djkurtz@google.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
| |
|
|
|
|
|
|
|
|
| |
The register-default delay time for wait the 24MHz OSC stabilization as well
as PMU stabilization is 750ms, let's decrease them to a still safe 30ms.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
If CONFIG_PM_SLEEP is disabled, we get a build error for rockchips:
arch/arm/mach-rockchip/built-in.o: In function `rockchip_dt_init':
:(.init.text+0x1c): undefined reference to `rockchip_suspend_init'
This adds an inline alternative for that case.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Cc: linux-rockchip@lists.infradead.org
|
|
|
It's a basic version of suspend and resume for rockchip,
it only support RK3288 now.
Signed-off-by: Tony Xie <xxx@rock-chips.com>
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
