summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/am335x-bone.dts
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: am335x-bone-common: enable aes and shamMatt Porter2015-03-061-8/+0
| | | | | | | | | | | | Beaglebone Black doesn't have AES and SHAM enabled like the original Beaglebone White dts. This breaks applications that leverage the crypto blocks so fix this by enabling these nodes in the am335x-bone-common.dtsi. With this change, enabling the nodes in am335x-bone.dts is no longer required so remove them. Signed-off-by: Matt Porter <mporter@konsulko.com> Acked-by: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am335x-bone*: Fix model name and update compatibility informationNishanth Menon2014-09-031-0/+5
| | | | | | | | | | | | | | | Beaglebone white and beaglebone black differ in tiny little aspects. This is the reason why we maintain seperate dts for these platforms. However, there is no real way to decode from dtb which platform it is since compatible and model name are the same for both platforms. Fix this so that beaglebone black and beaglebone are identifiable, while maintaining compatibility for older zImages which might use old beaglebone compatible flag for black as well. Reported-by: Tom Rini <trini@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: AM33XX: Add AES data and documentationMark A. Greer2013-10-111-0/+4
| | | | | | | | | | | | | Add the generic AM33XX AES module's device tree data and enable it for the am335x-evm, am335x-evmsk, and am335x-bone platforms. Also add Documentation file describing the data for the AES module. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Joel Fernandes <joelf@ti.com> [joelf@ti.com: Dropped interrupt-parent property, documentation fixups] Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
* ARM: dts: AM33XX: Add SHAM data and documentationMark A. Greer2013-10-111-0/+4
| | | | | | | | | | | | | | Add the generic AM33XX SHAM module's device tree data and enable it for the am335x-evm, am335x-evmsk, and am335x-bone platforms. Also add Documentation file describing the data for the SHAM module. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Joel Fernandes <joelf@ti.com> [joelf@ti.com: Dropped interrupt-parent property, documentation fixups] Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
* ARM: dts: am335x-bone: add CD for mmc1Alexander Holler2013-10-111-1/+0
| | | | | | | | | | This enables the use of MMC cards even when no card was inserted at boot. Signed-off-by: Alexander Holler <holler@ahsoftware.de> Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Tested-by: Kevin Hilman <khilman@linaro.org> Reviewed-by: Nishanth Menon <nm@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
* ARM: dts: AM33XX: Add MMC support and documentationMatt Porter2013-10-111-0/+11
| | | | | | | | | | | | | | | | Adds AM33XX MMC support for am335x-bone, am335x-evm and am335x-evmsk boards. Also added is the DMA binding definitions based on the generic DMA request binding. Additional changes made to DTS: * Interrupt, reg and compatible properties added * ti,needs-special-hs-handling added Signed-off-by: Matt Porter <mporter@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
* ARM: dts: am335x-bone*: add DT for BeagleBone BlackKoen Kooi2013-09-171-255/+1
| | | | | | | | | | | | | | | | | | | | The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added, so create a common dtsi both can use. IMPORTANT: booting the existing am335x-bone.dts will blow up the HDMI transceiver after a dozen boots with an uSD card inserted because LDO will be at 3.3V instead of 1.8. MMC support for AM335x still isn't in, so only the LDO change has been added. Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Tested-by: Tom Rini <trini@ti.com> Tested-by: Matt Porter <matt.porter@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Tested-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
* usb: musb: am335x: add second port to beagle boneSebastian Andrzej Siewior2013-08-271-0/+13
| | | | | | | | | | | | | So I assumed that Beagle bone has only one USB port in host mode because the micro USB connector had an USB-UART there. I was wrong a little. The second port runs on host mode, but the micro USB plug is connected to an internal HUB with two ports: one to the USB-UART and one to musb instance one. For that reason, this patch enables both ports: the primary in device mode only and the second in host mode only. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: usb: dsps: update code according to the binding documentSebastian Andrzej Siewior2013-08-271-1/+1
| | | | | | | | | | | | | | | | | | | | | This relfects the code and dts requires changes due to recent .dts binding updates: - use mg prefix for the Metor Graphics specific attributes - use power in mA not in mA/2 as specifed in the USB2.0 specification - remove the child node for USB. This is driver specific on won't be reflected in the device tree - use the "mentor" prefix instead of "mg". - use "dr_mode" istead of "mg,port-mode" for the port mode. The former is used by a few other drivers. Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: devicetree@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: dsps: use proper child nodesSebastian Andrzej Siewior2013-08-091-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This moves the two instances from the big node into two child nodes. The glue layer ontop does almost nothing. There is one devices containing the control module for USB (2) phy, (2) usb and later the dma engine. The usb device is the "glue device" which contains the musb device as a child. This is what we do ever since. The new file musb_am335x is just here to prob the new bus and populate child devices. There are a lot of changes to the dsps file as a result of the changes: - musb_core_offset This is gone. The device tree provides memory ressources information for the device there is no need to "fix" things - instances This is gone as well. If we have two instances then we have have two child enabled nodes in the device tree. For instance the SoC in beagle bone has two USB instances but only one has been wired up so there is no need to load and init the second instance since it won't be used. - dsps_glue is now per glue device In the past there was one of this structs but with an array of two and each instance accessed its variable depending on the platform device id. - no unneeded copy of structs I do not know why struct dsps_musb_wrapper is copied but it is not necessary. The same goes for musb_hdrc_platform_data which allocated on demand and then again by platform_device_add_data(). One copy is enough. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2013-07-091-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: "This is a re-do of the net-next pull request for the current merge window. The only difference from the one I made the other day is that this has Eliezer's interface renames and the timeout handling changes made based upon your feedback, as well as a few bug fixes that have trickeled in. Highlights: 1) Low latency device polling, eliminating the cost of interrupt handling and context switches. Allows direct polling of a network device from socket operations, such as recvmsg() and poll(). Currently ixgbe, mlx4, and bnx2x support this feature. Full high level description, performance numbers, and design in commit 0a4db187a999 ("Merge branch 'll_poll'") From Eliezer Tamir. 2) With the routing cache removed, ip_check_mc_rcu() gets exercised more than ever before in the case where we have lots of multicast addresses. Use a hash table instead of a simple linked list, from Eric Dumazet. 3) Add driver for Atheros CQA98xx 802.11ac wireless devices, from Bartosz Markowski, Janusz Dziedzic, Kalle Valo, Marek Kwaczynski, Marek Puzyniak, Michal Kazior, and Sujith Manoharan. 4) Support reporting the TUN device persist flag to userspace, from Pavel Emelyanov. 5) Allow controlling network device VF link state using netlink, from Rony Efraim. 6) Support GRE tunneling in openvswitch, from Pravin B Shelar. 7) Adjust SOCK_MIN_RCVBUF and SOCK_MIN_SNDBUF for modern times, from Daniel Borkmann and Eric Dumazet. 8) Allow controlling of TCP quickack behavior on a per-route basis, from Cong Wang. 9) Several bug fixes and improvements to vxlan from Stephen Hemminger, Pravin B Shelar, and Mike Rapoport. In particular, support receiving on multiple UDP ports. 10) Major cleanups, particular in the area of debugging and cookie lifetime handline, to the SCTP protocol code. From Daniel Borkmann. 11) Allow packets to cross network namespaces when traversing tunnel devices. From Nicolas Dichtel. 12) Allow monitoring netlink traffic via AF_PACKET sockets, in a manner akin to how we monitor real network traffic via ptype_all. From Daniel Borkmann. 13) Several bug fixes and improvements for the new alx device driver, from Johannes Berg. 14) Fix scalability issues in the netem packet scheduler's time queue, by using an rbtree. From Eric Dumazet. 15) Several bug fixes in TCP loss recovery handling, from Yuchung Cheng. 16) Add support for GSO segmentation of MPLS packets, from Simon Horman. 17) Make network notifiers have a real data type for the opaque pointer that's passed into them. Use this to properly handle network device flag changes in arp_netdev_event(). From Jiri Pirko and Timo Teräs. 18) Convert several drivers over to module_pci_driver(), from Peter Huewe. 19) tcp_fixup_rcvbuf() can loop 500 times over loopback, just use a O(1) calculation instead. From Eric Dumazet. 20) Support setting of explicit tunnel peer addresses in ipv6, just like ipv4. From Nicolas Dichtel. 21) Protect x86 BPF JIT against spraying attacks, from Eric Dumazet. 22) Prevent a single high rate flow from overruning an individual cpu during RX packet processing via selective flow shedding. From Willem de Bruijn. 23) Don't use spinlocks in TCP md5 signing fast paths, from Eric Dumazet. 24) Don't just drop GSO packets which are above the TBF scheduler's burst limit, chop them up so they are in-bounds instead. Also from Eric Dumazet. 25) VLAN offloads are missed when configured on top of a bridge, fix from Vlad Yasevich. 26) Support IPV6 in ping sockets. From Lorenzo Colitti. 27) Receive flow steering targets should be updated at poll() time too, from David Majnemer. 28) Fix several corner case regressions in PMTU/redirect handling due to the routing cache removal, from Timo Teräs. 29) We have to be mindful of ipv4 mapped ipv6 sockets in upd_v6_push_pending_frames(). From Hannes Frederic Sowa. 30) Fix L2TP sequence number handling bugs, from James Chapman." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1214 commits) drivers/net: caif: fix wrong rtnl_is_locked() usage drivers/net: enic: release rtnl_lock on error-path vhost-net: fix use-after-free in vhost_net_flush net: mv643xx_eth: do not use port number as platform device id net: sctp: confirm route during forward progress virtio_net: fix race in RX VQ processing virtio: support unlocked queue poll net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bit Documentation: Fix references to defunct linux-net@vger.kernel.org net/fs: change busy poll time accounting net: rename low latency sockets functions to busy poll bridge: fix some kernel warning in multicast timer sfc: Fix memory leak when discarding scattered packets sit: fix tunnel update via netlink dt:net:stmmac: Add dt specific phy reset callback support. dt:net:stmmac: Add support to dwmac version 3.610 and 3.710 dt:net:stmmac: Allocate platform data only if its NULL. net:stmmac: fix memleak in the open method ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available net: ipv6: fix wrong ping_v6_sendmsg return value ...
| * ARM: dts: AM33XX: Add phy-mode to CPSW nodeMugunthan V N2013-06-041-0/+2
| | | | | | | | | | | | | | Adding phy-mode to CPSW node for beaglebone, EVM and EVMsk. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ARM: dts: AM33XX: Add pinmux configuration for CPSW to beagleboneMugunthan V N2013-06-191-0/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add pinmux configurations for MII based CPSW ethernet to am335x-bone. Default mode is nothing but the values required for the module during active state. With this configurations module is functional as expected. Sleep mode is nothing but the values required for the module during inactive state. The pins are configured to its reset state to optimize energy usage for the pins for the suspend/resume cycle Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* | ARM: dts: AM33XX: Use pinctrl constantsFlorian Vaussard2013-06-181-9/+9
| | | | | | | | | | | | | | | | | | Using constants for pinctrl allows a better readability, and removes redundancy with comments. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* | ARM: dts: AM33XX: Use existing constants for GPIOsFlorian Vaussard2013-06-181-4/+4
| | | | | | | | | | | | | | | | Use standard GPIO constants to enhance the readability of DT GPIOs. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* | ARM: dts: AM3XXX: Use #include for all device treesFlorian Vaussard2013-06-181-1/+1
| | | | | | | | | | | | | | | | | | | | Replace /include/ by #include for AM33XX and AM35XX device tree files, in order to use the C pre-processor, making use of #define features possible. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* | ARM: dts: AM33XX: Set pinmux for clkout2 pad used for clock outputVaibhav Hiremath2013-06-181-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | xdma_event_intr1.clkout2 pad can be used to source clock from either 32K OSC or any of the PLL (except MPU) outputs. On the existing AM335x based boards (EVM, EVM-SK and Bone), this pad is used to feed the clock to audio codes. So, this patch configures the pinmux to get clkout2 on the pad. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* | ARM: dts: AM33XX: Add default pinctrl binding for UART0 deviceVaibhav Hiremath2013-06-181-0/+10
| | | | | | | | | | | | | | | | | | Add pin control binding for UART0 device nodes in all board specific DT files. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Matt Porter <mporter@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* | ARM: dts: AM33XX: Fix uart numbering to match hardware/TRMVaibhav Hiremath2013-06-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | With DT support, where naming convention is based on base-addr and not id, so we should follow TRM/Spec numbering label. This patch changes UART numbering as per TRM, as uart0-5. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Matt Porter <mporter@ti.com> Cc: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* | ARM: dts: AM33XX: Add pinctrl binding to gpio-leds nodeVaibhav Hiremath2013-06-181-1/+4
| | | | | | | | | | | | | | | | | | | | Now gpio-leds driver is using devm_pinctrl_get_select_default() api to set default pinmux configuration required for the functionality of the driver, so this patch moves respective pinctrl binding inside leds node. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* | ARM: dts: AM33XX: Add default pinctrl binding for I2C deviceVaibhav Hiremath2013-06-181-0/+10
|/ | | | | | | | | | | | Add pin control binding for I2C device nodes in all board specific DT files (as per current usage), EVM: Both i2c0 and i2c1 EVM-SK and Bone: Only i2c0 Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Matt Porter <mporter@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: AM33XX: Rename I2C and GPIO nodesAnilKumar Ch2013-04-091-5/+5
| | | | | | | | | | | Rename I2C and GPIO nodes according to AM33XX TRM. According to AM33XX TRM device instances are starting from "0" like i2c0, i2c1 and i2c3. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> [panto@antoniou-consulting.com: initial patch by pantelis's] Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2012-12-121-0/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking changes from David Miller: 1) Allow to dump, monitor, and change the bridge multicast database using netlink. From Cong Wang. 2) RFC 5961 TCP blind data injection attack mitigation, from Eric Dumazet. 3) Networking user namespace support from Eric W. Biederman. 4) tuntap/virtio-net multiqueue support by Jason Wang. 5) Support for checksum offload of encapsulated packets (basically, tunneled traffic can still be checksummed by HW). From Joseph Gasparakis. 6) Allow BPF filter access to VLAN tags, from Eric Dumazet and Daniel Borkmann. 7) Bridge port parameters over netlink and BPDU blocking support from Stephen Hemminger. 8) Improve data access patterns during inet socket demux by rearranging socket layout, from Eric Dumazet. 9) TIPC protocol updates and cleanups from Ying Xue, Paul Gortmaker, and Jon Maloy. 10) Update TCP socket hash sizing to be more in line with current day realities. The existing heurstics were choosen a decade ago. From Eric Dumazet. 11) Fix races, queue bloat, and excessive wakeups in ATM and associated drivers, from Krzysztof Mazur and David Woodhouse. 12) Support DOVE (Distributed Overlay Virtual Ethernet) extensions in VXLAN driver, from David Stevens. 13) Add "oops_only" mode to netconsole, from Amerigo Wang. 14) Support set and query of VEB/VEPA bridge mode via PF_BRIDGE, also allow DCB netlink to work on namespaces other than the initial namespace. From John Fastabend. 15) Support PTP in the Tigon3 driver, from Matt Carlson. 16) tun/vhost zero copy fixes and improvements, plus turn it on by default, from Michael S. Tsirkin. 17) Support per-association statistics in SCTP, from Michele Baldessari. And many, many, driver updates, cleanups, and improvements. Too numerous to mention individually. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits) net/mlx4_en: Add support for destination MAC in steering rules net/mlx4_en: Use generic etherdevice.h functions. net: ethtool: Add destination MAC address to flow steering API bridge: add support of adding and deleting mdb entries bridge: notify mdb changes via netlink ndisc: Unexport ndisc_{build,send}_skb(). uapi: add missing netconf.h to export list pkt_sched: avoid requeues if possible solos-pci: fix double-free of TX skb in DMA mode bnx2: Fix accidental reversions. bna: Driver Version Updated to 3.1.2.1 bna: Firmware update bna: Add RX State bna: Rx Page Based Allocation bna: TX Intr Coalescing Fix bna: Tx and Rx Optimizations bna: Code Cleanup and Enhancements ath9k: check pdata variable before dereferencing it ath5k: RX timestamp is reported at end of frame ath9k_htc: RX timestamp is reported at end of frame ...
| * arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XXMugunthan V N2012-11-141-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | Add CPSW and MDIO related device tree data for AM33XX. Also enable them into board/evm dts files by providing respective phy-id. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ARM: dts: AM33XX: Add user-leds device tree data to am335x-boneAnilKumar Ch2012-11-061-0/+30
| | | | | | | | | | | | | | | | | | Add gpio-leds device tree data to am335x-bone device to enable gpio based user-leds (USR0, USR1, USR2 and USR3) present on BeagleBone. [koen@dominion.thruhere.net: led0, led1 suggested by koen] Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* | ARM: dts: AM33XX: Add pinmux configuration for user-leds to BONEAnilKumar Ch2012-11-061-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | Add pinmux configurations for gpio based user-keys to am335x-bone. In this patch, only single named mode/state is added and these pins are configured during pinctrl driver initialization. Default mode is nothing but the values required for the module during active state. With this configurations module is functional as expected. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* | ARM: dts: AM33XX: Add device tree OPP tableAnilKumar Ch2012-10-291-0/+6
|/ | | | | | | | | | | | Add DT OPP table for AM33XX family of devices. This data is decoded by OF with of_init_opp_table() helper function. Also adds cpu0 supply name to the corresponding dts files. cpu0-supply name is used by cpufreq-cpu0 driver to get the regulator pointer for voltage modifications. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: AM33XX: Convert all hex numbers to lower-caseVaibhav Hiremath2012-09-071-2/+2
| | | | | | | | | To make it consistent, convert all hex number presentation to lower-case from all am33xx specific nodes. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* arm/dts: Add tps65217 regulator DT data to am335x-bone.dtsAnilKumar Ch2012-08-301-0/+54
| | | | | | | | | | | | | | Add tps65217 regulator device tree data to AM335x-Bone by adding regulator consumers with tightened constraints and regulator-name. TPS65217 regulator handle can be obtained by using this regulator name. This patch also add I2C node with I2C frequency and tps65217 PMIC I2C slave address. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* arm/dts: AM33XX: Set the default status of module to "disabled" stateVaibhav Hiremath2012-08-241-0/+6
| | | | | | | | | | | | | | | | | | Ideally in common SoC dtsi file should set all modules to "disabled" state and it should get enabled in respective EVM/Board dts file as per usage. This patch sets default status of all modules to "disabled" state in am33xx.dtsi file. Currently there are no modules supported as part of Bone and EVM dts support, so care to add entry "status = "okay"" while adding support for any module. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Tony Lindgren <tony@atomide.com>
* arm/dts: Add support for AM335x BeagleBoneAnilKumar Ch2012-07-031-0/+20
Add AM335X BeagleBone device tree source (am335x-evm.dts) file to use the am33xx.dtsi SoC file, along with the memory node information. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Reviewed-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
OpenPOWER on IntegriCloud