summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/media
Commit message (Collapse)AuthorAgeFilesLines
* [media] Revert "[media] tvp5150: document input connectors DT bindings"Javier Martinez Canillas2016-03-031-43/+0
| | | | | | | | | | | | | | | | | | | This reverts commit 82c2ffeb217a ("[media] tvp5150: document input connectors DT bindings") since the DT binding is too device driver specific and should instead be more generic and use the bindings in Documentation/devicetree/bindings/display/connector/ and linked to the tvp5150 using the OF graph port and endpoints. There are still ongoing discussions about how the input connectors will be supported by the Media Controller framework so until that is settled, it is better to revert the connectors portion of the bindings to avoid known to be broken bindings docs to hit mainline. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] v4l: vsp1: Configure device based on IP versionLaurent Pinchart2016-02-191-21/+0
| | | | | | | | | The IP version number carries enough information to identify the exact device instance features. Drop the related DT properties and use the IP version instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] v4l: vsp1: Add support for the R-Car Gen3 VSP2Laurent Pinchart2016-02-191-9/+11
| | | | | | | | Add DT compatible strings for the VSP2 instances found in the R-Car Gen3 SoCs and support them in the vsp1 driver. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] v4l: vsp1: Support VSP1 instances without any UDSLaurent Pinchart2016-02-191-1/+2
| | | | | | | | Not all VSP1 instances include a UDS. Make the renesas,#uds DT property optional and accept a number of UDS equal to 0 as valid. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] tvp5150: document input connectors DT bindingsJavier Martinez Canillas2016-02-111-0/+43
| | | | | | | | | The tvp5150 decoder has different input connectors so extend the device tree binding to allow device tree source files to define the connectors that are available on a given board. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] rcar_jpu: Add R-Car Gen2 Fallback Compatibility StringSimon Horman2016-02-011-6/+7
| | | | | | | | | | Add fallback compatibility string. This is in keeping with the fallback scheme being adopted wherever appropriate for drivers for Renesas SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: ti-vpe: Document CAL driverBenoit Parrot2016-02-011-0/+72
| | | | | | | | | Device Tree bindings for the Camera Adaptation Layer (CAL) driver Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] mt9v032: Add reset and standby gpiosMarkus Pargmann2016-01-251-0/+2
| | | | | | | | | | | | | | Add optional reset and standby gpios. The reset gpio is used to reset the chip in power_on(). The standby gpio is not used currently. It is just unset, so the chip is not in standby. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] tvp5150: Add device tree binding documentJavier Martinez Canillas2016-01-251-0/+45
| | | | | | | | | Add a Device Tree binding document for the TVP5150 video decoder. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] soc_camera: rcar_vin: Add R-Car Gen3 supportYoshihiko Mori2016-01-251-0/+1
| | | | | | | | | Add chip identification for R-Car Gen3. Signed-off-by: Yoshihiko Mori <yoshihiko.mori.nx@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2016-01-171-0/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm updates from Dave Airlie: "This is the main drm pull request for 4.5. I don't think I've missed anything too major, I'm mostly back at work now but I'll probably get some sleep in 5 years time. Summary: New drivers: - etnaviv: GPU driver for the 3D core on the Vivante core used in numerous ARM boards. Highlights: Core: - Atomic suspend/resume helpers - Move the headers to using userspace friendlier types. - Documentation updates - Lots of struct_mutex removal. - Bunch of DP MST fixes from AMD. Panel: - More DSI helpers - Support for some new basic panels i915: - Basic Kabylake support - DP link training and detect code refactoring - fbc/psr fixes - FIFO underrun fixes - SDE interrupt handling fixes - dma-buf/fence support in pageflip path. - GPU side for MST audio support radeon/amdgpu: - Drop UMS support - GPUVM/Scheduler optimisations - Initial Powerplay support for Tonga/Fiji/CZ/ST - ACP audio prerequisites nouveau: - GK20a instmem improvements - PCIE link speed change support msm: - DSI support for msm8960/apq8064 tegra: - Host1X support for Tegra210 SoC vc4: - 3D acceleration support armada: - Get rid of struct mutex tda998x: - Atomic modesetting support - TMDS clock limitations omapdrm: - Atomic modesetting support - improved TILER performance rockchip: - RK3036 VOP support - Atomic modesetting support - Synopsys DW MIPI DSI support exynos: - Runtime PM support - of_graph binding for DP panels - Cleanup of IPP code - Configurable plane support - Kernel panic fixes at release time" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (711 commits) drm/fb_cma_helper: Remove implicit call to disable_unused_functions drm/amdgpu: add missing irq.h include drm/vmwgfx: Fix a width / pitch mismatch on framebuffer updates drm/vmwgfx: Fix an incorrect lock check drm: nouveau: fix nouveau_debugfs_init prototype drm/nouveau/pci: fix check in nvkm_pcie_set_link drm/amdgpu: validate duplicates first drm/amdgpu: move VM page tables to the LRU end on CS v2 drm/ttm: add ttm_bo_move_to_lru_tail function v2 drm/ttm: fix adding foreign BOs to the swap LRU drm/ttm: fix adding foreign BOs to the LRU during init v2 drm/radeon: use kobj_to_dev() drm/amdgpu: use kobj_to_dev() drm/amdgpu/cz: force vce clocks when sclks are forced drm/amdgpu/cz: force uvd clocks when sclks are forced drm/amdgpu/cz: add code to enable forcing VCE clocks drm/amdgpu/cz: add code to enable forcing UVD clocks drm/amdgpu: fix lost sync_to if scheduler is enabled. drm/amd/powerplay: fix static checker warning for return meaningless value. drm/sysfs: use kobj_to_dev() ...
| * drm/exynos: gsc: add device tree support and remove usage of static mappingsSeung-Woo Kim2015-12-131-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds device tree support for exynos_drm_gsc. This patch also fixed build issue on non-Exynos platforms, thus dependency on !ARCH_MULTIPLATFORM can be now removed. The driver cannot be used simultaneously with V4L2 Mem2Mem GScaller driver thought. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
* | Merge tag 'devicetree-for-4.5' of ↵Linus Torvalds2016-01-141-3/+4
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - Rework and export the changeset API to make it available to users other than DT overlays - ARM secure devices binding - OCTEON USB binding - Clean-up of various SRAM binding docs - Various other binding doc updates * tag 'devicetree-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (21 commits) drivers/of: Export OF changeset functions Fix documentation for adp1653 DT ARM: psci: Fix indentation in DT bindings of/platform: export of_default_bus_match_table of/unittest: Show broken behaviour in the platform bus of: fix declaration of of_io_request_and_map of/address: replace printk(KERN_ERR ...) with pr_err(...) of/irq: optimize device node matching loop in of_irq_init() dt-bindings: tda998x: Document the required 'port' node. net/macb: bindings doc: Merge cdns-emac to macb dt-bindings: Misc fix for the ATH79 DDR controllers dt-bindings: Misc fix for the ATH79 MISC interrupt controllers Documentation: dt: Add bindings for Secure-only devices dt-bindings: ARM: add arm,cortex-a72 compatible string ASoC: Atmel: ClassD: add GCK's parent clock in DT binding DT: add Olimex to vendor prefixes Documentation: fsl-quadspi: Add fsl,ls1021-qspi compatible string Documentation/devicetree: document OCTEON USB bindings usb: misc: usb3503: Describe better how to bind clock to the hub dt-bindings: Consolidate SRAM bindings from all vendors ...
| * | Fix documentation for adp1653 DTPali Rohár2016-01-051-3/+4
| |/ | | | | | | | | | | | | | | | | Property names do not match real names needed by driver itself. This patch fix this problem. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rob Herring <robh@kernel.org>
* | [media] c8sectpfe: Update DT binding doc with some minor fixesPeter Griffin2015-11-181-7/+7
| | | | | | | | | | | | Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] c8sectpfe: Update binding to reset-gpiosPeter Griffin2015-11-181-3/+3
|/ | | | | | | | | | | reset-gpios is more clear than rst-gpio. This change has been done as one atomic commit but it does breaks compatability with older dtbs. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] s5p-jpeg: add support for 5433Andrzej Pietrasiewicz2015-10-011-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | JPEG IP found in Exynos5433 is similar to what is in Exynos4, but there are some subtle differences which this patch takes into account. The most important difference is in what is processed by the JPEG IP and what has to be provided to it. In case of 5433 the IP does not parse Huffman and quantisation tables, so this has to be performed with the CPU and the majority of the code in this patch does that. A small but important difference is in what address is passed to the JPEG IP. In case of 5433 it is the SOS (start of scan) position, which is natural, because the headers must be parsed elsewhere. There is also a difference in how the hardware is put to work in device_run. Data structures are extended as appropriate to accommodate the above changes. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Reviewed-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] c8sectpfe: Add DT bindings documentation for c8sectpfe driverPeter Griffin2015-08-111-0/+89
| | | | | | | | This patch adds the DT bindings documentation for the c8sectpfe LinuxDVB demux driver whose IP is in the STiH407 family silicon SoC's. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] devicetree: bindings: Document Renesas R-Car JPEG Processing UnitMikhail Ulyanov2015-08-111-0/+24
| | | | | | | | | Add Renesas R-Car JPEG processing unit driver device tree bindings documentation. Signed-off-by: Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] tc358743: support probe from device treePhilipp Zabel2015-07-221-0/+48
| | | | | | | | | | | Add support for probing the TC358743 subdevice from device tree. The reference clock must be supplied using the common clock bindings. MIPI CSI-2 specific properties are parsed from the OF graph endpoint node and support for a non-continuous MIPI CSI-2 clock is added. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: adv7604: ability to read default input port from DTIan Molton2015-07-061-0/+3
| | | | | | | | | | | Adds support to the adv7604 driver for specifying the default input port in the Device tree. If no value is provided, the driver will be unable to select an input without help from userspace. Tested-by: William Towle <william.towle@codethink.co.uk> Signed-off-by: Ian Molton <ian.molton@codethink.co.uk> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: adv7604: document support for ADV7612 dual HDMI input decoderIan Molton2015-07-061-8/+10
| | | | | | | | | | This documentation accompanies the patch adding support for the ADV7612 dual HDMI decoder / repeater chip. Signed-off-by: Ian Molton <ian.molton@codethink.co.uk> Reviewed-by: William Towle <william.towle@codethink.co.uk> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] bdisp: add DT bindings documentationFabien Dessenne2015-06-091-0/+32
| | | | | | | | This adds DT binding documentation for STMicroelectronics bdisp driver. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: i2c/adp1653: Documentation for devicetree support for adp1653Pavel Machek2015-04-271-0/+37
| | | | | | | | Documentation for adp1653 bindings. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* Merge tag 'armsoc-dt' of ↵Linus Torvalds2015-04-221-0/+71
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "As always, this tends to be one of our bigger branches. There are lots of updates this release, but not that many jumps out as something that needs more detailed coverage. Some of the highlights are: - DTs for the new Annapurna Labs Alpine platform - more graphics DT pieces falling into place on Exynos, bridges, clocks. - plenty of DT updates for Qualcomm platforms for various IP blocks - some churn on Tegra due to switch-over to tool-generated pinctrl data - misc fixes and updates for Atmel at91 platforms - various DT updates to add IP block support on Broadcom's Cygnus platforms - more updates for Renesas platforms as DT support is added for various IP blocks (IPMMU, display, audio, etc)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (231 commits) ARM: dts: alpine: add internal pci Revert "ARM: dts: mt8135: Add pinctrl/GPIO/EINT node for mt8135." ARM: mvebu: use 0xf1000000 as internal registers on Armada 370 DB ARM: dts: qcom: Add idle state device nodes for 8064 ARM: dts: qcom: Add idle states device nodes for 8084 ARM: dts: qcom: Add idle states device nodes for 8974/8074 ARM: dts: qcom: Update power-controller device node for 8064 Krait CPUs ARM: dts: qcom: Add power-controller device node for 8084 Krait CPUs ARM: dts: qcom: Add power-controller device node for 8074 Krait CPUs devicetree: bindings: Document qcom,idle-states devicetree: bindings: Update qcom,saw2 node bindings dt-bindings: Add #defines for MSM8916 clocks and resets arm: dts: qcom: Add LPASS Audio HW to IPQ8064 device tree arm: dts: qcom: Add APQ8084 chipset SPMI PMIC's nodes arm: dts: qcom: Add 8x74 chipset SPMI PMIC's nodes arm: dts: qcom: Add SPMI PMIC Arbiter nodes for APQ8084 and MSM8974 arm: dts: qcom: Add LCC nodes arm: dts: qcom: Add TCSR support for MSM8960 arm: dts: qcom: Add TCSR support for MSM8660 arm: dts: qcom: Add TCSR support for IPQ8064 ...
| * Documentation: DT: Add bindings for omap3ispSakari Ailus2015-03-191-0/+71
| | | | | | | | | | | | Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | Revert "[media] Add device tree support to adp1653 flash driver"Mauro Carvalho Chehab2015-04-091-37/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | As requested by Sakari: "The driver changes are still being reviewed. It's been proposed that the max-microamp property be renamed." So, as the DT bindings are not agreed upstream yet, let's revert it. Requested-by: Sakari Ailus <sakari.ailus@iki.fi> This reverts commit b6100f10bdc2019a65297d2597c388de2f7dd653.
* | [media] Add device tree support to adp1653 flash driverPavel Machek2015-04-081-0/+37
| | | | | | | | | | | | | | | | Nokia N900 is switching to device tree, make sure we can use flash there, too. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] s5p-jpeg: add 5420 family supportAndrzej Pietrasiewicz2015-04-071-1/+1
| | | | | | | | | | | | | | | | | | JPEG IP found in Exynos5420 is similar to what is in Exynos3250, but there are some subtle differences which this patch takes into account. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] v4l: xilinx: Add Test Pattern Generator driverLaurent Pinchart2015-04-031-0/+71
| | | | | | | | | | | | | | | | | | | | | | | | The TPG generates multiple static or dynamic test patterns. The driver currently hardcodes the pattern to the moving box pattern. Signed-off-by: Christian Kohn <christian.kohn@xilinx.com> Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] v4l: xilinx: Add Video Timing Controller driverLaurent Pinchart2015-04-031-0/+33
| | | | | | | | | | | | | | | | | | | | The Video Timing Controller (VTC) includes a timing detector and/or a timing generator. Only the generator is currently supported. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] v4l: xilinx: Add Xilinx Video IP coreLaurent Pinchart2015-04-032-0/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Xilinx platforms have no hardwired video capture or video processing interface. Users create capture and memory to memory processing pipelines in the FPGA fabric to suit their particular needs, by instantiating video IP cores from a large library. The Xilinx Video IP core is a framework that models a video pipeline described in the device tree and expose the pipeline to userspace through the media controller and V4L2 APIs. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radheys@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] media: i2c: add support for omnivision's ov2659 sensorBenoit Parrot2015-04-021-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | this patch adds support for omnivision's ov2659 sensor, the driver supports following features: 1: Asynchronous probing 2: DT support 3: Media controller support Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] v4l: mt9v032: Add OF supportLaurent Pinchart2015-04-021-0/+39
| | | | | | | | | | | | | | | | | | Parse DT properties into a platform data structure when a DT node is available. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] media: ov2640: dt: add the device tree binding documentJosh Wu2015-04-021-0/+46
| | | | | | | | | | | | | | | | | | | | | | Add the document for ov2640 dt. Cc: devicetree@vger.kernel.org Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] dt: bindings: Add lane-polarity property to endpoint nodesSakari Ailus2015-04-021-0/+6
|/ | | | | | | | | Add lane-polarity property to endpoint nodes. This essentially tells that the order of the differential signal wires is inverted. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* Merge tag 'dt-for-linus' of ↵Linus Torvalds2015-02-171-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "DT changes continue to be the bulk of our merge window contents. We continue to have a large set of changes across the board as new platforms and drivers are added. Some of the new platforms are: - Alphascale ASM9260 - Marvell Armada 388 - CSR Atlas7 - TI Davinci DM816x - Hisilicon HiP01 - ST STiH418 There have also been some sweeping changes, including relicensing of DTS contents from GPL to GPLv2+/X11 so that the same files can be reused in other non-GPL projects more easily. There's also been changes to the DT Makefile to make it a little less conflict-ridden and churny down the road" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (330 commits) ARM: dts: Add PPMU node for exynos4412-trats2 ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato ARM: dts: Add PPMU dt node for exynos4 and exynos4210 ARM: dts: Add PPMU dt node for exynos3250 ARM: dts: add mipi dsi device node for exynos4415 ARM: dts: add fimd device node for exynos4415 ARM: dts: Add syscon phandle to the video-phy node for Exynos4 ARM: dts: Add sound nodes for exynos4412-trats2 ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2 ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi ARM: dts: Add max77693 charger node for exynos4412-trats2 ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2 ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2 ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2 ARM: dts: am57xx-beagle-x15: Fix USB2 mode ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB ARM: dts: dra72-evm: Add extcon nodes for USB ARM: dts: dra7-evm: Add extcon nodes for USB ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb ...
| * ARM: dts: convert to generic power domain bindings for exynos DTMarek Szyprowski2015-01-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch replaces all custom samsung,power-domain dt properties with generic power domain bindings and updates documentation Samsung's devices referring to old binding. Suggested-by: Kevin Hilman <khilman@kernel.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> [javier.martinez@collabora.co.uk: tested on the Exynos5800 Peach Pi Chromebook] Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene@kernel.org>
* | Merge tag 'devicetree-for-3.20' of ↵Linus Torvalds2015-02-122-2/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree changes from Rob Herring: - DT unittests for I2C probing and overlays from Pantelis Antoniou - Remove DT unittest dependency on OF_DYNAMIC from Gaurav Minocha - Add Tegra compatible strings missing for newer parts from Paul Walmsley - Various vendor prefix additions * tag 'devicetree-for-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: Add vendor prefix for OmniVision Technologies of: Use ovti for Omnivision of: Add vendor prefix for Truly Semiconductors Limited of: Add vendor prefix for Himax Technologies Inc. of/fdt: fix sparse warning of: unitest: Add I2C overlay unit tests. Documentation: DT: document compatible string existence requirement Documentation: DT bindings: add nvidia, tegra132-denver compatible string Documentation: DT bindings: add more Tegra chip compatible strings of: EXPORT_SYMBOL_GPL of_property_read_u64_array of: Fix brace position for struct of_device_id definition of/unittest: Remove obsolete code dt-bindings: use isil prefix for Intersil in vendor-prefixes.txt Add AD Holdings Plc. to vendor-prefixes. dt-bindings: Add Silicon Mitus vendor prefix Removes OF_UNITTEST dependency on OF_DYNAMIC config symbol pinctrl: fix up device tree bindings DT: Vendors: Add Everspin doc: add bindings document for altera fpga manager drivers: of: Export of_reserved_mem_device_{init,release}
| * | of: Use ovti for OmnivisionFabio Estevam2015-02-042-2/+2
| |/ | | | | | | | | | | | | The correct symbol for OmniVision Technologies is 'ovti', so let's convert it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Rob Herring <robh@kernel.org>
* | [media] rc: sunxi-cir: Add support for the larger fifo found on sun5i and sun6iHans de Goede2015-01-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the larger fifo found on sun5i and sun6i, having a separate compatible for the ir found on sun5i & sun6i also is useful if we ever want to add ir transmit support, because the sun5i & sun6i version do not have transmit support. Note this commits also adds checking for the end-of-packet interrupt flag (which was already enabled), as the fifo-data-available interrupt flag only gets set when the trigger-level is exceeded. So far we've been getting away with not doing this because of the low trigger-level, but this is something which we should have done since day one. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] rc: sunxi-cir: Add support for an optional reset controllerHans de Goede2015-01-291-0/+2
| | | | | | | | | | | | | | | | | | | | On sun6i the cir block is attached to the reset controller, add support for de-asserting the reset if a reset controller is specified in dt. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] media: platform: add VPFE capture driver support for AM437XBenoit Parrot2014-12-231-0/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds Video Processing Front End (VPFE) driver for AM437X family of devices Driver supports the following: - V4L2 API using MMAP buffer access based on videobuf2 api - Asynchronous sensor/decoder sub device registration - DT support Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Darren Etheridge <detheridge@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> [hans.verkuil@cisco.com: swapped two lines to fix vpfe_release() & add pinctrl include] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] of: smiapp: Add documentationSakari Ailus2014-12-231-0/+63
| | | | | | | | | | | | | | Document the smiapp device tree properties. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] of: v4l: Document link-frequencies property in video-interfaces.txtSakari Ailus2014-12-231-0/+3
|/ | | | | | | | link-frequencies is a 64-bit unsigned integer array of allowed link frequencies. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] rcar_vin: Add DT support for r8a7793 and r8a7794 SoCsYoshihiro Kaneko2014-12-121-0/+2
| | | | | | | | Based on platform device work by Matsuoka-san. Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: rc: meson: document device tree bindingsBeniamino Galvani2014-11-261-0/+14
| | | | | | | | This adds binding documentation for the infrared remote control receiver available in Amlogic Meson SoCs. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] si4713: add DT binding documentationSebastian Reichel2014-11-141-0/+30
| | | | | | | | | This patch adds the DT bindings documentation for Silicon Labs Si4713 FM radio transmitter. Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] rc: Add DT bindings for hix5hd2Guoxiong Yan2014-09-231-0/+25
| | | | | | Signed-off-by: Guoxiong Yan <yanguoxiong@huawei.com> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: atmel-isi: add primary DT supportJosh Wu2014-07-301-0/+51
| | | | | | | | | | | This patch add the DT support for Atmel ISI driver. It use the same v4l2 DT interface that defined in video-interfaces.txt. Signed-off-by: Josh Wu <josh.wu@atmel.com> Cc: devicetree@vger.kernel.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
OpenPOWER on IntegriCloud