diff options
Diffstat (limited to 'tools/perf/Documentation/perf-c2c.txt')
| -rw-r--r-- | tools/perf/Documentation/perf-c2c.txt | 290 |
1 files changed, 290 insertions, 0 deletions
diff --git a/tools/perf/Documentation/perf-c2c.txt b/tools/perf/Documentation/perf-c2c.txt new file mode 100644 index 000000000000..3f06730c7f47 --- /dev/null +++ b/tools/perf/Documentation/perf-c2c.txt @@ -0,0 +1,290 @@ +perf-c2c(1) +=========== + +NAME +---- +perf-c2c - Shared Data C2C/HITM Analyzer. + +SYNOPSIS +-------- +[verse] +'perf c2c record' [<options>] <command> +'perf c2c record' [<options>] -- [<record command options>] <command> +'perf c2c report' [<options>] + +DESCRIPTION +----------- +C2C stands for Cache To Cache. + +The perf c2c tool provides means for Shared Data C2C/HITM analysis. It allows +you to track down the cacheline contentions. + +The tool is based on x86's load latency and precise store facility events +provided by Intel CPUs. These events provide: + - memory address of the access + - type of the access (load and store details) + - latency (in cycles) of the load access + +The c2c tool provide means to record this data and report back access details +for cachelines with highest contention - highest number of HITM accesses. + +The basic workflow with this tool follows the standard record/report phase. +User uses the record command to record events data and report command to +display it. + + +RECORD OPTIONS +-------------- +-e:: +--event=:: + Select the PMU event. Use 'perf mem record -e list' + to list available events. + +-v:: +--verbose:: + Be more verbose (show counter open errors, etc). + +-l:: +--ldlat:: + Configure mem-loads latency. + +-k:: +--all-kernel:: + Configure all used events to run in kernel space. + +-u:: +--all-user:: + Configure all used events to run in user space. + +REPORT OPTIONS +-------------- +-k:: +--vmlinux=<file>:: + vmlinux pathname + +-v:: +--verbose:: + Be more verbose (show counter open errors, etc). + +-i:: +--input:: + Specify the input file to process. + +-N:: +--node-info:: + Show extra node info in report (see NODE INFO section) + +-c:: +--coalesce:: + Specify sorintg fields for single cacheline display. + Following fields are available: tid,pid,iaddr,dso + (see COALESCE) + +-g:: +--call-graph:: + Setup callchains parameters. + Please refer to perf-report man page for details. + +--stdio:: + Force the stdio output (see STDIO OUTPUT) + +--stats:: + Display only statistic tables and force stdio mode. + +--full-symbols:: + Display full length of symbols. + +--no-source:: + Do not display Source:Line column. + +--show-all:: + Show all captured HITM lines, with no regard to HITM % 0.0005 limit. + +-f:: +--force:: + Don't do ownership validation. + +-d:: +--display:: + Siwtch to HITM type (rmt, lcl) to display and sort on. Total HITMs as default. + +C2C RECORD +---------- +The perf c2c record command setup options related to HITM cacheline analysis +and calls standard perf record command. + +Following perf record options are configured by default: +(check perf record man page for details) + + -W,-d,--sample-cpu + +Unless specified otherwise with '-e' option, following events are monitored by +default: + + cpu/mem-loads,ldlat=30/P + cpu/mem-stores/P + +User can pass any 'perf record' option behind '--' mark, like (to enable +callchains and system wide monitoring): + + $ perf c2c record -- -g -a + +Please check RECORD OPTIONS section for specific c2c record options. + +C2C REPORT +---------- +The perf c2c report command displays shared data analysis. It comes in two +display modes: stdio and tui (default). + +The report command workflow is following: + - sort all the data based on the cacheline address + - store access details for each cacheline + - sort all cachelines based on user settings + - display data + +In general perf report output consist of 2 basic views: + 1) most expensive cachelines list + 2) offsets details for each cacheline + +For each cacheline in the 1) list we display following data: +(Both stdio and TUI modes follow the same fields output) + + Index + - zero based index to identify the cacheline + + Cacheline + - cacheline address (hex number) + + Total records + - sum of all cachelines accesses + + Rmt/Lcl Hitm + - cacheline percentage of all Remote/Local HITM accesses + + LLC Load Hitm - Total, Lcl, Rmt + - count of Total/Local/Remote load HITMs + + Store Reference - Total, L1Hit, L1Miss + Total - all store accesses + L1Hit - store accesses that hit L1 + L1Hit - store accesses that missed L1 + + Load Dram + - count of local and remote DRAM accesses + + LLC Ld Miss + - count of all accesses that missed LLC + + Total Loads + - sum of all load accesses + + Core Load Hit - FB, L1, L2 + - count of load hits in FB (Fill Buffer), L1 and L2 cache + + LLC Load Hit - Llc, Rmt + - count of LLC and Remote load hits + +For each offset in the 2) list we display following data: + + HITM - Rmt, Lcl + - % of Remote/Local HITM accesses for given offset within cacheline + + Store Refs - L1 Hit, L1 Miss + - % of store accesses that hit/missed L1 for given offset within cacheline + + Data address - Offset + - offset address + + Pid + - pid of the process responsible for the accesses + + Tid + - tid of the process responsible for the accesses + + Code address + - code address responsible for the accesses + + cycles - rmt hitm, lcl hitm, load + - sum of cycles for given accesses - Remote/Local HITM and generic load + + cpu cnt + - number of cpus that participated on the access + + Symbol + - code symbol related to the 'Code address' value + + Shared Object + - shared object name related to the 'Code address' value + + Source:Line + - source information related to the 'Code address' value + + Node + - nodes participating on the access (see NODE INFO section) + +NODE INFO +--------- +The 'Node' field displays nodes that accesses given cacheline +offset. Its output comes in 3 flavors: + - node IDs separated by ',' + - node IDs with stats for each ID, in following format: + Node{cpus %hitms %stores} + - node IDs with list of affected CPUs in following format: + Node{cpu list} + +User can switch between above flavors with -N option or +use 'n' key to interactively switch in TUI mode. + +COALESCE +-------- +User can specify how to sort offsets for cacheline. + +Following fields are available and governs the final +output fields set for caheline offsets output: + + tid - coalesced by process TIDs + pid - coalesced by process PIDs + iaddr - coalesced by code address, following fields are displayed: + Code address, Code symbol, Shared Object, Source line + dso - coalesced by shared object + +By default the coalescing is setup with 'pid,tid,iaddr'. + +STDIO OUTPUT +------------ +The stdio output displays data on standard output. + +Following tables are displayed: + Trace Event Information + - overall statistics of memory accesses + + Global Shared Cache Line Event Information + - overall statistics on shared cachelines + + Shared Data Cache Line Table + - list of most expensive cachelines + + Shared Cache Line Distribution Pareto + - list of all accessed offsets for each cacheline + +TUI OUTPUT +---------- +The TUI output provides interactive interface to navigate +through cachelines list and to display offset details. + +For details please refer to the help window by pressing '?' key. + +CREDITS +------- +Although Don Zickus, Dick Fowles and Joe Mario worked together +to get this implemented, we got lots of early help from Arnaldo +Carvalho de Melo, Stephane Eranian, Jiri Olsa and Andi Kleen. + +C2C BLOG +-------- +Check Joe's blog on c2c tool for detailed use case explanation: + https://joemario.github.io/blog/2016/09/01/c2c-blog/ + +SEE ALSO +-------- +linkperf:perf-record[1], linkperf:perf-mem[1] |
