diff options
Diffstat (limited to 'include/net/mac80211.h')
| -rw-r--r-- | include/net/mac80211.h | 414 |
1 files changed, 245 insertions, 169 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 8856e2d60e9f..0b983bed3829 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -3,7 +3,7 @@ * * Copyright 2002-2005, Devicescape Software, Inc. * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> - * Copyright 2007 Johannes Berg <johannes@sipsolutions.net> + * Copyright 2007-2008 Johannes Berg <johannes@sipsolutions.net> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -82,22 +82,6 @@ enum ieee80211_notification_types { }; /** - * struct ieee80211_ht_bss_info - describing BSS's HT characteristics - * - * This structure describes most essential parameters needed - * to describe 802.11n HT characteristics in a BSS. - * - * @primary_channel: channel number of primery channel - * @bss_cap: 802.11n's general BSS capabilities (e.g. channel width) - * @bss_op_mode: 802.11n's BSS operation modes (e.g. HT protection) - */ -struct ieee80211_ht_bss_info { - u8 primary_channel; - u8 bss_cap; /* use IEEE80211_HT_IE_CHA_ */ - u8 bss_op_mode; /* use IEEE80211_HT_IE_ */ -}; - -/** * enum ieee80211_max_queues - maximum number of queues * * @IEEE80211_MAX_QUEUES: Maximum number of regular device queues. @@ -115,7 +99,7 @@ enum ieee80211_max_queues { * The information provided in this structure is required for QoS * transmit queue configuration. Cf. IEEE 802.11 7.3.2.29. * - * @aifs: arbitration interface space [0..255] + * @aifs: arbitration interframe space [0..255] * @cw_min: minimum contention window [a value of the form * 2^n-1 in the range 1..32767] * @cw_max: maximum contention window [like @cw_min] @@ -172,6 +156,19 @@ enum ieee80211_bss_change { }; /** + * struct ieee80211_bss_ht_conf - BSS's changing HT configuration + * @secondary_channel_offset: secondary channel offset, uses + * %IEEE80211_HT_PARAM_CHA_SEC_ values + * @width_40_ok: indicates that 40 MHz bandwidth may be used for TX + * @operation_mode: HT operation mode (like in &struct ieee80211_ht_info) + */ +struct ieee80211_bss_ht_conf { + u8 secondary_channel_offset; + bool width_40_ok; + u16 operation_mode; +}; + +/** * struct ieee80211_bss_conf - holds the BSS's changing parameters * * This structure keeps information about a BSS (and an association @@ -180,15 +177,17 @@ enum ieee80211_bss_change { * @assoc: association status * @aid: association ID number, valid only when @assoc is true * @use_cts_prot: use CTS protection - * @use_short_preamble: use 802.11b short preamble - * @use_short_slot: use short slot time (only relevant for ERP) + * @use_short_preamble: use 802.11b short preamble; + * if the hardware cannot handle this it must set the + * IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE hardware flag + * @use_short_slot: use short slot time (only relevant for ERP); + * if the hardware cannot handle this it must set the + * IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE hardware flag * @dtim_period: num of beacons before the next DTIM, for PSM * @timestamp: beacon timestamp * @beacon_int: beacon interval * @assoc_capability: capabilities taken from assoc resp - * @assoc_ht: association in HT mode - * @ht_conf: ht capabilities - * @ht_bss_conf: ht extended capabilities + * @ht: BSS's HT configuration * @basic_rates: bitmap of basic rates, each bit stands for an * index into the rate table configured by the driver in * the current band. @@ -206,10 +205,7 @@ struct ieee80211_bss_conf { u16 assoc_capability; u64 timestamp; u64 basic_rates; - /* ht related data */ - bool assoc_ht; - struct ieee80211_ht_info *ht_conf; - struct ieee80211_ht_bss_info *ht_bss_conf; + struct ieee80211_bss_ht_conf ht; }; /** @@ -218,29 +214,24 @@ struct ieee80211_bss_conf { * These flags are used with the @flags member of &ieee80211_tx_info. * * @IEEE80211_TX_CTL_REQ_TX_STATUS: request TX status callback for this frame. - * @IEEE80211_TX_CTL_USE_RTS_CTS: use RTS-CTS before sending frame - * @IEEE80211_TX_CTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g., - * for combined 802.11g / 802.11b networks) + * @IEEE80211_TX_CTL_ASSIGN_SEQ: The driver has to assign a sequence + * number to this frame, taking care of not overwriting the fragment + * number and increasing the sequence number only when the + * IEEE80211_TX_CTL_FIRST_FRAGMENT flag is set. mac80211 will properly + * assign sequence numbers to QoS-data frames but cannot do so correctly + * for non-QoS-data and management frames because beacons need them from + * that counter as well and mac80211 cannot guarantee proper sequencing. + * If this flag is set, the driver should instruct the hardware to + * assign a sequence number to the frame or assign one itself. Cf. IEEE + * 802.11-2007 7.1.3.4.1 paragraph 3. This flag will always be set for + * beacons and always be clear for frames without a sequence number field. * @IEEE80211_TX_CTL_NO_ACK: tell the low level not to wait for an ack - * @IEEE80211_TX_CTL_RATE_CTRL_PROBE: TBD * @IEEE80211_TX_CTL_CLEAR_PS_FILT: clear powersave filter for destination * station - * @IEEE80211_TX_CTL_REQUEUE: TBD * @IEEE80211_TX_CTL_FIRST_FRAGMENT: this is a first fragment of the frame - * @IEEE80211_TX_CTL_SHORT_PREAMBLE: TBD - * @IEEE80211_TX_CTL_LONG_RETRY_LIMIT: this frame should be send using the - * through set_retry_limit configured long retry value * @IEEE80211_TX_CTL_SEND_AFTER_DTIM: send this frame after DTIM beacon * @IEEE80211_TX_CTL_AMPDU: this frame should be sent as part of an A-MPDU - * @IEEE80211_TX_CTL_OFDM_HT: this frame can be sent in HT OFDM rates. number - * of streams when this flag is on can be extracted from antenna_sel_tx, - * so if 1 antenna is marked use SISO, 2 antennas marked use MIMO, n - * antennas marked use MIMO_n. - * @IEEE80211_TX_CTL_GREEN_FIELD: use green field protection for this frame - * @IEEE80211_TX_CTL_40_MHZ_WIDTH: send this frame using 40 Mhz channel width - * @IEEE80211_TX_CTL_DUP_DATA: duplicate data frame on both 20 Mhz channels - * @IEEE80211_TX_CTL_SHORT_GI: send this frame using short guard interval - * @IEEE80211_TX_CTL_INJECTED: TBD + * @IEEE80211_TX_CTL_INJECTED: Frame was injected, internal to mac80211. * @IEEE80211_TX_STAT_TX_FILTERED: The frame was not transmitted * because the destination STA was in powersave mode. * @IEEE80211_TX_STAT_ACK: Frame was acknowledged @@ -248,62 +239,66 @@ struct ieee80211_bss_conf { * is for the whole aggregation. * @IEEE80211_TX_STAT_AMPDU_NO_BACK: no block ack was returned, * so consider using block ack request (BAR). - * @IEEE80211_TX_CTL_ASSIGN_SEQ: The driver has to assign a sequence - * number to this frame, taking care of not overwriting the fragment - * number and increasing the sequence number only when the - * IEEE80211_TX_CTL_FIRST_FRAGMENT flags is set. mac80211 will properly - * assign sequence numbers to QoS-data frames but cannot do so correctly - * for non-QoS-data and management frames because beacons need them from - * that counter as well and mac80211 cannot guarantee proper sequencing. - * If this flag is set, the driver should instruct the hardware to - * assign a sequence number to the frame or assign one itself. Cf. IEEE - * 802.11-2007 7.1.3.4.1 paragraph 3. This flag will always be set for - * beacons always be clear for frames without a sequence number field. + * @IEEE80211_TX_CTL_RATE_CTRL_PROBE: internal to mac80211, can be + * set by rate control algorithms to indicate probe rate, will + * be cleared for fragmented frames (except on the last fragment) */ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0), - IEEE80211_TX_CTL_USE_RTS_CTS = BIT(2), - IEEE80211_TX_CTL_USE_CTS_PROTECT = BIT(3), - IEEE80211_TX_CTL_NO_ACK = BIT(4), - IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(5), - IEEE80211_TX_CTL_CLEAR_PS_FILT = BIT(6), - IEEE80211_TX_CTL_REQUEUE = BIT(7), - IEEE80211_TX_CTL_FIRST_FRAGMENT = BIT(8), - IEEE80211_TX_CTL_SHORT_PREAMBLE = BIT(9), - IEEE80211_TX_CTL_LONG_RETRY_LIMIT = BIT(10), - IEEE80211_TX_CTL_SEND_AFTER_DTIM = BIT(12), - IEEE80211_TX_CTL_AMPDU = BIT(13), - IEEE80211_TX_CTL_OFDM_HT = BIT(14), - IEEE80211_TX_CTL_GREEN_FIELD = BIT(15), - IEEE80211_TX_CTL_40_MHZ_WIDTH = BIT(16), - IEEE80211_TX_CTL_DUP_DATA = BIT(17), - IEEE80211_TX_CTL_SHORT_GI = BIT(18), - IEEE80211_TX_CTL_INJECTED = BIT(19), - IEEE80211_TX_STAT_TX_FILTERED = BIT(20), - IEEE80211_TX_STAT_ACK = BIT(21), - IEEE80211_TX_STAT_AMPDU = BIT(22), - IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(23), - IEEE80211_TX_CTL_ASSIGN_SEQ = BIT(24), + IEEE80211_TX_CTL_ASSIGN_SEQ = BIT(1), + IEEE80211_TX_CTL_NO_ACK = BIT(2), + IEEE80211_TX_CTL_CLEAR_PS_FILT = BIT(3), + IEEE80211_TX_CTL_FIRST_FRAGMENT = BIT(4), + IEEE80211_TX_CTL_SEND_AFTER_DTIM = BIT(5), + IEEE80211_TX_CTL_AMPDU = BIT(6), + IEEE80211_TX_CTL_INJECTED = BIT(7), + IEEE80211_TX_STAT_TX_FILTERED = BIT(8), + IEEE80211_TX_STAT_ACK = BIT(9), + IEEE80211_TX_STAT_AMPDU = BIT(10), + IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(11), + IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(12), +}; + +enum mac80211_rate_control_flags { + IEEE80211_TX_RC_USE_RTS_CTS = BIT(0), + IEEE80211_TX_RC_USE_CTS_PROTECT = BIT(1), + IEEE80211_TX_RC_USE_SHORT_PREAMBLE = BIT(2), + + /* rate index is an MCS rate number instead of an index */ + IEEE80211_TX_RC_MCS = BIT(3), + IEEE80211_TX_RC_GREEN_FIELD = BIT(4), + IEEE80211_TX_RC_40_MHZ_WIDTH = BIT(5), + IEEE80211_TX_RC_DUP_DATA = BIT(6), + IEEE80211_TX_RC_SHORT_GI = BIT(7), }; -#define IEEE80211_TX_INFO_DRIVER_DATA_SIZE \ - (sizeof(((struct sk_buff *)0)->cb) - 8) -#define IEEE80211_TX_INFO_DRIVER_DATA_PTRS \ - (IEEE80211_TX_INFO_DRIVER_DATA_SIZE / sizeof(void *)) +/* there are 40 bytes if you don't need the rateset to be kept */ +#define IEEE80211_TX_INFO_DRIVER_DATA_SIZE 40 + +/* if you do need the rateset, then you have less space */ +#define IEEE80211_TX_INFO_RATE_DRIVER_DATA_SIZE 24 -/* maximum number of alternate rate retry stages */ -#define IEEE80211_TX_MAX_ALTRATE 3 +/* maximum number of rate stages */ +#define IEEE80211_TX_MAX_RATES 5 /** - * struct ieee80211_tx_altrate - alternate rate selection/status + * struct ieee80211_tx_rate - rate selection/status * - * @rate_idx: rate index to attempt to send with - * @limit: number of retries before fallback + * @idx: rate index to attempt to send with + * @flags: rate control flags (&enum mac80211_rate_control_flags) + * @count: number of tries in this rate before going to the next rate + * + * A value of -1 for @idx indicates an invalid rate and, if used + * in an array of retry rates, that no more rates should be tried. + * + * When used for transmit status reporting, the driver should + * always report the rate along with the flags it used. */ -struct ieee80211_tx_altrate { - s8 rate_idx; - u8 limit; +struct ieee80211_tx_rate { + s8 idx; + u8 count; + u8 flags; }; /** @@ -318,15 +313,12 @@ struct ieee80211_tx_altrate { * it may be NULL. * * @flags: transmit info flags, defined above - * @band: TBD - * @tx_rate_idx: TBD - * @antenna_sel_tx: TBD + * @band: the band to transmit on (use for checking for races) + * @antenna_sel_tx: antenna to use, 0 for automatic diversity * @control: union for control data * @status: union for status data * @driver_data: array of driver_data pointers * @retry_count: number of retries - * @excessive_retries: set to 1 if the frame was retried many times - * but not acknowledged * @ampdu_ack_len: number of aggregated frames. * relevant only if IEEE80211_TX_STATUS_AMPDU was set. * @ampdu_ack_map: block ack bit map for the aggregation. @@ -337,31 +329,43 @@ struct ieee80211_tx_info { /* common information */ u32 flags; u8 band; - s8 tx_rate_idx; + u8 antenna_sel_tx; - /* 1 byte hole */ + /* 2 byte hole */ union { struct { + union { + /* rate control */ + struct { + struct ieee80211_tx_rate rates[ + IEEE80211_TX_MAX_RATES]; + s8 rts_cts_rate_idx; + }; + /* only needed before rate control */ + unsigned long jiffies; + }; /* NB: vif can be NULL for injected frames */ struct ieee80211_vif *vif; struct ieee80211_key_conf *hw_key; struct ieee80211_sta *sta; - unsigned long jiffies; - s8 rts_cts_rate_idx; - u8 retry_limit; - struct ieee80211_tx_altrate retries[IEEE80211_TX_MAX_ALTRATE]; } control; struct { + struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES]; + u8 ampdu_ack_len; u64 ampdu_ack_map; int ack_signal; - struct ieee80211_tx_altrate retries[IEEE80211_TX_MAX_ALTRATE + 1]; - u8 retry_count; - bool excessive_retries; - u8 ampdu_ack_len; + /* 8 bytes free */ } status; - void *driver_data[IEEE80211_TX_INFO_DRIVER_DATA_PTRS]; + struct { + struct ieee80211_tx_rate driver_rates[ + IEEE80211_TX_MAX_RATES]; + void *rate_driver_data[ + IEEE80211_TX_INFO_RATE_DRIVER_DATA_SIZE / sizeof(void *)]; + }; + void *driver_data[ + IEEE80211_TX_INFO_DRIVER_DATA_SIZE / sizeof(void *)]; }; }; @@ -370,6 +374,41 @@ static inline struct ieee80211_tx_info *IEEE80211_SKB_CB(struct sk_buff *skb) return (struct ieee80211_tx_info *)skb->cb; } +/** + * ieee80211_tx_info_clear_status - clear TX status + * + * @info: The &struct ieee80211_tx_info to be cleared. + * + * When the driver passes an skb back to mac80211, it must report + * a number of things in TX status. This function clears everything + * in the TX status but the rate control information (it does clear + * the count since you need to fill that in anyway). + * + * NOTE: You can only use this function if you do NOT use + * info->driver_data! Use info->rate_driver_data + * instead if you need only the less space that allows. + */ +static inline void +ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) +{ + int i; + + BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) != + offsetof(struct ieee80211_tx_info, control.rates)); + BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) != + offsetof(struct ieee80211_tx_info, driver_rates)); + BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) != 8); + /* clear the rate counts */ + for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) + info->status.rates[i].count = 0; + + BUILD_BUG_ON( + offsetof(struct ieee80211_tx_info, status.ampdu_ack_len) != 23); + memset(&info->status.ampdu_ack_len, 0, + sizeof(struct ieee80211_tx_info) - + offsetof(struct ieee80211_tx_info, status.ampdu_ack_len)); +} + /** * enum mac80211_rx_flags - receive flags @@ -442,21 +481,48 @@ struct ieee80211_rx_status { * * Flags to define PHY configuration options * - * @IEEE80211_CONF_SHORT_SLOT_TIME: use 802.11g short slot time * @IEEE80211_CONF_RADIOTAP: add radiotap header at receive time (if supported) - * @IEEE80211_CONF_SUPPORT_HT_MODE: use 802.11n HT capabilities (if supported) * @IEEE80211_CONF_PS: Enable 802.11 power save mode */ enum ieee80211_conf_flags { - /* - * TODO: IEEE80211_CONF_SHORT_SLOT_TIME will be removed once drivers - * have been converted to use bss_info_changed() for slot time - * configuration - */ - IEEE80211_CONF_SHORT_SLOT_TIME = (1<<0), - IEEE80211_CONF_RADIOTAP = (1<<1), - IEEE80211_CONF_SUPPORT_HT_MODE = (1<<2), - IEEE80211_CONF_PS = (1<<3), + IEEE80211_CONF_RADIOTAP = (1<<0), + IEEE80211_CONF_PS = (1<<1), +}; + +/* XXX: remove all this once drivers stop trying to use it */ +static inline int __deprecated __IEEE80211_CONF_SHORT_SLOT_TIME(void) +{ + return 0; +} +#define IEEE80211_CONF_SHORT_SLOT_TIME (__IEEE80211_CONF_SHORT_SLOT_TIME()) + +struct ieee80211_ht_conf { + bool enabled; +}; + +/** + * enum ieee80211_conf_changed - denotes which configuration changed + * + * @IEEE80211_CONF_CHANGE_RADIO_ENABLED: the value of radio_enabled changed + * @IEEE80211_CONF_CHANGE_BEACON_INTERVAL: the beacon interval changed + * @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed + * @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed + * @IEEE80211_CONF_CHANGE_PS: the PS flag changed + * @IEEE80211_CONF_CHANGE_POWER: the TX power changed + * @IEEE80211_CONF_CHANGE_CHANNEL: the channel changed + * @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed + * @IEEE80211_CONF_CHANGE_HT: HT configuration changed + */ +enum ieee80211_conf_changed { + IEEE80211_CONF_CHANGE_RADIO_ENABLED = BIT(0), + IEEE80211_CONF_CHANGE_BEACON_INTERVAL = BIT(1), + IEEE80211_CONF_CHANGE_LISTEN_INTERVAL = BIT(2), + IEEE80211_CONF_CHANGE_RADIOTAP = BIT(3), + IEEE80211_CONF_CHANGE_PS = BIT(4), + IEEE80211_CONF_CHANGE_POWER = BIT(5), + IEEE80211_CONF_CHANGE_CHANNEL = BIT(6), + IEEE80211_CONF_CHANGE_RETRY_LIMITS = BIT(7), + IEEE80211_CONF_CHANGE_HT = BIT(8), }; /** @@ -465,34 +531,31 @@ enum ieee80211_conf_flags { * This struct indicates how the driver shall configure the hardware. * * @radio_enabled: when zero, driver is required to switch off the radio. - * TODO make a flag * @beacon_int: beacon interval (TODO make interface config) * @listen_interval: listen interval in units of beacon interval * @flags: configuration flags defined above * @power_level: requested transmit power (in dBm) - * @max_antenna_gain: maximum antenna gain (in dBi) - * @antenna_sel_tx: transmit antenna selection, 0: default/diversity, - * 1/2: antenna 0/1 - * @antenna_sel_rx: receive antenna selection, like @antenna_sel_tx - * @ht_conf: describes current self configuration of 802.11n HT capabilies - * @ht_bss_conf: describes current BSS configuration of 802.11n HT parameters * @channel: the channel to tune to + * @ht: the HT configuration for the device + * @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame + * (a frame not RTS protected), called "dot11LongRetryLimit" in 802.11, + * but actually means the number of transmissions not the number of retries + * @short_frame_max_tx_count: Maximum number of transmissions for a "short" + * frame, called "dot11ShortRetryLimit" in 802.11, but actually means the + * number of transmissions not the number of retries */ struct ieee80211_conf { - int radio_enabled; - int beacon_int; - u16 listen_interval; u32 flags; int power_level; - int max_antenna_gain; - u8 antenna_sel_tx; - u8 antenna_sel_rx; - struct ieee80211_channel *channel; + u16 listen_interval; + bool radio_enabled; - struct ieee80211_ht_info ht_conf; - struct ieee80211_ht_bss_info ht_bss_conf; + u8 long_frame_max_tx_count, short_frame_max_tx_count; + + struct ieee80211_channel *channel; + struct ieee80211_ht_conf ht; }; /** @@ -502,11 +565,14 @@ struct ieee80211_conf { * use during the life of a virtual interface. * * @type: type of this virtual interface + * @bss_conf: BSS configuration for this interface, either our own + * or the BSS we're associated to * @drv_priv: data area for driver use, will always be aligned to * sizeof(void *). */ struct ieee80211_vif { enum nl80211_iftype type; + struct ieee80211_bss_conf bss_conf; /* must be last */ u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *)))); }; @@ -685,7 +751,7 @@ enum set_key_cmd { * @addr: MAC address * @aid: AID we assigned to the station if we're an AP * @supp_rates: Bitmap of supported rates (per band) - * @ht_info: HT capabilities of this STA + * @ht_cap: HT capabilities of this STA; restricted to our own TX capabilities * @drv_priv: data area for driver use, will always be aligned to * sizeof(void *), size is determined in hw information. */ @@ -693,7 +759,7 @@ struct ieee80211_sta { u64 supp_rates[IEEE80211_NUM_BANDS]; u8 addr[ETH_ALEN]; u16 aid; - struct ieee80211_ht_info ht_info; + struct ieee80211_sta_ht_cap ht_cap; /* must be last */ u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *)))); @@ -777,6 +843,9 @@ enum ieee80211_tkip_key_type { * @IEEE80211_HW_SPECTRUM_MGMT: * Hardware supports spectrum management defined in 802.11h * Measurement, Channel Switch, Quieting, TPC + * + * @IEEE80211_HW_AMPDU_AGGREGATION: + * Hardware supports 11n A-MPDU aggregation. */ enum ieee80211_hw_flags { IEEE80211_HW_RX_INCLUDES_FCS = 1<<1, @@ -788,6 +857,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_SIGNAL_DBM = 1<<7, IEEE80211_HW_NOISE_DBM = 1<<8, IEEE80211_HW_SPECTRUM_MGMT = 1<<9, + IEEE80211_HW_AMPDU_AGGREGATION = 1<<10, }; /** @@ -846,8 +916,8 @@ enum ieee80211_hw_flags { * @sta_data_size: size (in bytes) of the drv_priv data area * within &struct ieee80211_sta. * - * @max_altrates: maximum number of alternate rate retry stages - * @max_altrate_tries: maximum number of tries for each stage + * @max_rates: maximum number of alternate rate retry stages + * @max_rate_tries: maximum number of tries for each stage */ struct ieee80211_hw { struct ieee80211_conf conf; @@ -864,12 +934,10 @@ struct ieee80211_hw { u16 ampdu_queues; u16 max_listen_interval; s8 max_signal; - u8 max_altrates; - u8 max_altrate_tries; + u8 max_rates; + u8 max_rate_tries; }; -struct ieee80211_hw *wiphy_to_hw(struct wiphy *wiphy); - /** * SET_IEEE80211_DEV - set device for 802.11 hardware * @@ -882,7 +950,7 @@ static inline void SET_IEEE80211_DEV(struct ieee80211_hw *hw, struct device *dev } /** - * SET_IEEE80211_PERM_ADDR - set the permanenet MAC address for 802.11 hardware + * SET_IEEE80211_PERM_ADDR - set the permanent MAC address for 802.11 hardware * * @hw: the &struct ieee80211_hw to set the MAC address for * @addr: the address to set @@ -906,9 +974,9 @@ static inline struct ieee80211_rate * ieee80211_get_tx_rate(const struct ieee80211_hw *hw, const struct ieee80211_tx_info *c) { - if (WARN_ON(c->tx_rate_idx < 0)) + if (WARN_ON(c->control.rates[0].idx < 0)) return NULL; - return &hw->wiphy->bands[c->band]->bitrates[c->tx_rate_idx]; + return &hw->wiphy->bands[c->band]->bitrates[c->control.rates[0].idx]; } static inline struct ieee80211_rate * @@ -924,9 +992,9 @@ static inline struct ieee80211_rate * ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, const struct ieee80211_tx_info *c, int idx) { - if (c->control.retries[idx].rate_idx < 0) + if (c->control.rates[idx + 1].idx < 0) return NULL; - return &hw->wiphy->bands[c->band]->bitrates[c->control.retries[idx].rate_idx]; + return &hw->wiphy->bands[c->band]->bitrates[c->control.rates[idx + 1].idx]; } /** @@ -975,7 +1043,7 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, * This happens everytime the iv16 wraps around (every 65536 packets). The * set_key() call will happen only once for each key (unless the AP did * rekeying), it will not include a valid phase 1 key. The valid phase 1 key is - * provided by udpate_tkip_key only. The trigger that makes mac80211 call this + * provided by update_tkip_key only. The trigger that makes mac80211 call this * handler is software decryption with wrap around of iv16. */ @@ -1109,7 +1177,7 @@ enum ieee80211_ampdu_mlme_action { * Must be implemented. * * @add_interface: Called when a netdevice attached to the hardware is - * enabled. Because it is not called for monitor mode devices, @open + * enabled. Because it is not called for monitor mode devices, @start * and @stop must be implemented. * The driver should perform any initialization it needs before * the device can be enabled. The initial configuration for the @@ -1175,10 +1243,8 @@ enum ieee80211_ampdu_mlme_action { * the device does fragmentation by itself; if this method is assigned then * the stack will not do fragmentation. * - * @set_retry_limit: Configuration of retry limits (if device needs it) - * * @sta_notify: Notifies low level driver about addition or removal - * of assocaited station or AP. + * of associated station or AP. * * @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max), * bursting) for a hardware TX queue. @@ -1219,7 +1285,7 @@ struct ieee80211_ops { struct ieee80211_if_init_conf *conf); void (*remove_interface)(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf); - int (*config)(struct ieee80211_hw *hw, struct ieee80211_conf *conf); + int (*config)(struct ieee80211_hw *hw, u32 changed); int (*config_interface)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_if_conf *conf); @@ -1246,8 +1312,6 @@ struct ieee80211_ops { u32 *iv32, u16 *iv16); int (*set_rts_threshold)(struct ieee80211_hw *hw, u32 value); int (*set_frag_threshold)(struct ieee80211_hw *hw, u32 value); - int (*set_retry_limit)(struct ieee80211_hw *hw, - u32 short_retry, u32 long_retr); void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, enum sta_notify_cmd, struct ieee80211_sta *sta); int (*conf_tx)(struct ieee80211_hw *hw, u16 queue, @@ -1480,7 +1544,7 @@ void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw, * the next beacon frame from the 802.11 code. The low-level is responsible * for calling this function before beacon data is needed (e.g., based on * hardware interrupt). Returned skb is used only once and low-level driver - * is responsible of freeing it. + * is responsible for freeing it. */ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif); @@ -1823,24 +1887,38 @@ struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_hw *hw, /* Rate control API */ + /** - * struct rate_selection - rate information for/from rate control algorithms - * - * @rate_idx: selected transmission rate index - * @nonerp_idx: Non-ERP rate to use instead if ERP cannot be used - * @probe_idx: rate for probing (or -1) - * @max_rate_idx: maximum rate index that can be used, this is - * input to the algorithm and will be enforced - */ -struct rate_selection { - s8 rate_idx, nonerp_idx, probe_idx, max_rate_idx; + * struct ieee80211_tx_rate_control - rate control information for/from RC algo + * + * @hw: The hardware the algorithm is invoked for. + * @sband: The band this frame is being transmitted on. + * @bss_conf: the current BSS configuration + * @reported_rate: The rate control algorithm can fill this in to indicate + * which rate should be reported to userspace as the current rate and + * used for rate calculations in the mesh network. + * @rts: whether RTS will be used for this frame because it is longer than the + * RTS threshold + * @short_preamble: whether mac80211 will request short-preamble transmission + * if the selected rate supports it + * @max_rate_idx: user-requested maximum rate (not MCS for now) + * @skb: the skb that will be transmitted, the control information in it needs + * to be filled in + */ +struct ieee80211_tx_rate_control { + struct ieee80211_hw *hw; + struct ieee80211_supported_band *sband; + struct ieee80211_bss_conf *bss_conf; + struct sk_buff *skb; + struct ieee80211_tx_rate reported_rate; + bool rts, short_preamble; + u8 max_rate_idx; }; struct rate_control_ops { struct module *module; const char *name; void *(*alloc)(struct ieee80211_hw *hw, struct dentry *debugfsdir); - void (*clear)(void *priv); void (*free)(void *priv); void *(*alloc_sta)(void *priv, struct ieee80211_sta *sta, gfp_t gfp); @@ -1852,10 +1930,8 @@ struct rate_control_ops { void (*tx_status)(void *priv, struct ieee80211_supported_band *sband, struct ieee80211_sta *sta, void *priv_sta, struct sk_buff *skb); - void (*get_rate)(void *priv, struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, void *priv_sta, - struct sk_buff *skb, - struct rate_selection *sel); + void (*get_rate)(void *priv, struct ieee80211_sta *sta, void *priv_sta, + struct ieee80211_tx_rate_control *txrc); void (*add_sta_debugfs)(void *priv, void *priv_sta, struct dentry *dir); |
