diff options
Diffstat (limited to 'include/linux/spi')
| -rw-r--r-- | include/linux/spi/spi.h | 31 | ||||
| -rw-r--r-- | include/linux/spi/spi_bitbang.h | 2 |
2 files changed, 32 insertions, 1 deletions
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 2c9cdef0598f..e713543336f1 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -24,6 +24,9 @@ #include <linux/slab.h> #include <linux/kthread.h> #include <linux/completion.h> +#include <linux/scatterlist.h> + +struct dma_chan; /* * INTERFACES between SPI master-side drivers and SPI infrastructure. @@ -266,6 +269,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * @auto_runtime_pm: the core should ensure a runtime PM reference is held * while the hardware is prepared, using the parent * device for the spidev + * @max_dma_len: Maximum length of a DMA transfer for the device. * @prepare_transfer_hardware: a message will soon arrive from the queue * so the subsystem requests the driver to prepare the transfer hardware * by issuing this call @@ -348,6 +352,8 @@ struct spi_master { #define SPI_MASTER_HALF_DUPLEX BIT(0) /* can't do full duplex */ #define SPI_MASTER_NO_RX BIT(1) /* can't do buffer read */ #define SPI_MASTER_NO_TX BIT(2) /* can't do buffer write */ +#define SPI_MASTER_MUST_RX BIT(3) /* requires rx */ +#define SPI_MASTER_MUST_TX BIT(4) /* requires tx */ /* lock and mutex for SPI bus locking */ spinlock_t bus_lock_spinlock; @@ -390,6 +396,17 @@ struct spi_master { void (*cleanup)(struct spi_device *spi); /* + * Used to enable core support for DMA handling, if can_dma() + * exists and returns true then the transfer will be mapped + * prior to transfer_one() being called. The driver should + * not modify or store xfer and dma_tx and dma_rx must be set + * while the device is prepared. + */ + bool (*can_dma)(struct spi_master *master, + struct spi_device *spi, + struct spi_transfer *xfer); + + /* * These hooks are for drivers that want to use the generic * master transfer queueing mechanism. If these are used, the * transfer() function above must NOT be specified by the driver. @@ -407,7 +424,9 @@ struct spi_master { bool rt; bool auto_runtime_pm; bool cur_msg_prepared; + bool cur_msg_mapped; struct completion xfer_completion; + size_t max_dma_len; int (*prepare_transfer_hardware)(struct spi_master *master); int (*transfer_one_message)(struct spi_master *master, @@ -428,6 +447,14 @@ struct spi_master { /* gpio chip select */ int *cs_gpios; + + /* DMA channels for use with core dmaengine helpers */ + struct dma_chan *dma_tx; + struct dma_chan *dma_rx; + + /* dummy data for full duplex devices */ + void *dummy_rx; + void *dummy_tx; }; static inline void *spi_master_get_devdata(struct spi_master *master) @@ -512,6 +539,8 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum); * (optionally) changing the chipselect status, then starting * the next transfer or completing this @spi_message. * @transfer_list: transfers are sequenced through @spi_message.transfers + * @tx_sg: Scatterlist for transmit, currently not for client use + * @rx_sg: Scatterlist for receive, currently not for client use * * SPI transfers always write the same number of bytes as they read. * Protocol drivers should always provide @rx_buf and/or @tx_buf. @@ -579,6 +608,8 @@ struct spi_transfer { dma_addr_t tx_dma; dma_addr_t rx_dma; + struct sg_table tx_sg; + struct sg_table rx_sg; unsigned cs_change:1; unsigned tx_nbits:3; diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h index daebaba886aa..85578d4be034 100644 --- a/include/linux/spi/spi_bitbang.h +++ b/include/linux/spi/spi_bitbang.h @@ -42,6 +42,6 @@ extern int spi_bitbang_setup_transfer(struct spi_device *spi, /* start or stop queue processing */ extern int spi_bitbang_start(struct spi_bitbang *spi); -extern int spi_bitbang_stop(struct spi_bitbang *spi); +extern void spi_bitbang_stop(struct spi_bitbang *spi); #endif /* __SPI_BITBANG_H */ |
