summaryrefslogtreecommitdiffstats
path: root/include/asm-arm/arch-omap
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-arm/arch-omap')
-rw-r--r--include/asm-arm/arch-omap/aic23.h4
-rw-r--r--include/asm-arm/arch-omap/board-ams-delta.h65
-rw-r--r--include/asm-arm/arch-omap/board-apollon.h45
-rw-r--r--include/asm-arm/arch-omap/board-h2.h4
-rw-r--r--include/asm-arm/arch-omap/board-h3.h4
-rw-r--r--include/asm-arm/arch-omap/board-h4.h8
-rw-r--r--include/asm-arm/arch-omap/board-netstar.h19
-rw-r--r--include/asm-arm/arch-omap/board-nokia.h54
-rw-r--r--include/asm-arm/arch-omap/board-perseus2.h4
-rw-r--r--include/asm-arm/arch-omap/board.h30
-rw-r--r--include/asm-arm/arch-omap/clock.h13
-rw-r--r--include/asm-arm/arch-omap/dma.h1
-rw-r--r--include/asm-arm/arch-omap/dmtimer.h1
-rw-r--r--include/asm-arm/arch-omap/dsp.h6
-rw-r--r--include/asm-arm/arch-omap/dsp_common.h13
-rw-r--r--include/asm-arm/arch-omap/gpioexpander.h24
-rw-r--r--include/asm-arm/arch-omap/hardware.h8
-rw-r--r--include/asm-arm/arch-omap/irda.h36
-rw-r--r--include/asm-arm/arch-omap/irqs.h5
-rw-r--r--include/asm-arm/arch-omap/keypad.h36
-rw-r--r--include/asm-arm/arch-omap/lcd_lph8923.h14
-rw-r--r--include/asm-arm/arch-omap/mcbsp.h65
-rw-r--r--include/asm-arm/arch-omap/mcspi.h16
-rw-r--r--include/asm-arm/arch-omap/menelaus.h2
-rw-r--r--include/asm-arm/arch-omap/mux.h54
-rw-r--r--include/asm-arm/arch-omap/omap-alsa.h124
-rw-r--r--include/asm-arm/arch-omap/omapfb.h98
-rw-r--r--include/asm-arm/arch-omap/param.h8
-rw-r--r--include/asm-arm/arch-omap/pm.h81
-rw-r--r--include/asm-arm/arch-omap/prcm.h404
-rw-r--r--include/asm-arm/arch-omap/sram.h2
-rw-r--r--include/asm-arm/arch-omap/system.h17
-rw-r--r--include/asm-arm/arch-omap/uncompress.h20
33 files changed, 764 insertions, 521 deletions
diff --git a/include/asm-arm/arch-omap/aic23.h b/include/asm-arm/arch-omap/aic23.h
index 590bac25b7c4..6513065941d0 100644
--- a/include/asm-arm/arch-omap/aic23.h
+++ b/include/asm-arm/arch-omap/aic23.h
@@ -57,6 +57,7 @@
#define LHV_MIN 0x0000
// Analog audio path control register
+#define STA_REG(x) ((x)<<6)
#define STE_ENABLED 0x0020
#define DAC_SELECTED 0x0010
#define BYPASS_ON 0x0008
@@ -109,4 +110,7 @@
#define TLV320AIC23ID1 (0x1a) // cs low
#define TLV320AIC23ID2 (0x1b) // cs high
+void tlv320aic23_power_up(void);
+void tlv320aic23_power_down(void);
+
#endif /* __ASM_ARCH_AIC23_H */
diff --git a/include/asm-arm/arch-omap/board-ams-delta.h b/include/asm-arm/arch-omap/board-ams-delta.h
new file mode 100644
index 000000000000..0070f6d3b75c
--- /dev/null
+++ b/include/asm-arm/arch-omap/board-ams-delta.h
@@ -0,0 +1,65 @@
+/*
+ * linux/include/asm-arm/arch-omap/board-ams-delta.h
+ *
+ * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_AMS_DELTA_H
+#define __ASM_ARCH_OMAP_AMS_DELTA_H
+
+#if defined (CONFIG_MACH_AMS_DELTA)
+
+#define AMS_DELTA_LATCH1_PHYS 0x01000000
+#define AMS_DELTA_LATCH1_VIRT 0xEA000000
+#define AMS_DELTA_MODEM_PHYS 0x04000000
+#define AMS_DELTA_MODEM_VIRT 0xEB000000
+#define AMS_DELTA_LATCH2_PHYS 0x08000000
+#define AMS_DELTA_LATCH2_VIRT 0xEC000000
+
+#define AMS_DELTA_LATCH1_LED_CAMERA 0x01
+#define AMS_DELTA_LATCH1_LED_ADVERT 0x02
+#define AMS_DELTA_LATCH1_LED_EMAIL 0x04
+#define AMS_DELTA_LATCH1_LED_HANDSFREE 0x08
+#define AMS_DELTA_LATCH1_LED_VOICEMAIL 0x10
+#define AMS_DELTA_LATCH1_LED_VOICE 0x20
+
+#define AMS_DELTA_LATCH2_LCD_VBLEN 0x0001
+#define AMS_DELTA_LATCH2_LCD_NDISP 0x0002
+#define AMS_DELTA_LATCH2_NAND_NCE 0x0004
+#define AMS_DELTA_LATCH2_NAND_NRE 0x0008
+#define AMS_DELTA_LATCH2_NAND_NWP 0x0010
+#define AMS_DELTA_LATCH2_NAND_NWE 0x0020
+#define AMS_DELTA_LATCH2_NAND_ALE 0x0040
+#define AMS_DELTA_LATCH2_NAND_CLE 0x0080
+#define AMS_DELTA_LATCH2_MODEM_NRESET 0x1000
+#define AMS_DELTA_LATCH2_MODEM_CODEC 0x2000
+
+#define AMS_DELTA_GPIO_PIN_NAND_RB 12
+
+#ifndef __ASSEMBLY__
+void ams_delta_latch1_write(u8 mask, u8 value);
+void ams_delta_latch2_write(u16 mask, u16 value);
+#endif
+
+#endif /* CONFIG_MACH_AMS_DELTA */
+
+#endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */
diff --git a/include/asm-arm/arch-omap/board-apollon.h b/include/asm-arm/arch-omap/board-apollon.h
new file mode 100644
index 000000000000..de0c5b792c58
--- /dev/null
+++ b/include/asm-arm/arch-omap/board-apollon.h
@@ -0,0 +1,45 @@
+/*
+ * linux/include/asm-arm/arch-omap/board-apollon.h
+ *
+ * Hardware definitions for Samsung OMAP24XX Apollon board.
+ *
+ * Initial creation by Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_APOLLON_H
+#define __ASM_ARCH_OMAP_APOLLON_H
+
+/* Placeholder for APOLLON specific defines */
+/* GPMC CS0 */
+#define APOLLON_CS0_BASE 0x00000000
+/* GPMC CS1 */
+#define APOLLON_CS1_BASE 0x08000000
+#define APOLLON_ETHR_START (APOLLON_CS1_BASE + 0x300)
+#define APOLLON_ETHR_GPIO_IRQ 74
+/* GPMC CS2 - reserved for OneNAND */
+#define APOLLON_CS2_BASE 0x10000000
+/* GPMC CS3 - reserved for NOR or NAND */
+#define APOLLON_CS3_BASE 0x18000000
+
+#endif /* __ASM_ARCH_OMAP_APOLLON_H */
+
diff --git a/include/asm-arm/arch-omap/board-h2.h b/include/asm-arm/arch-omap/board-h2.h
index 39ca5a31aeea..b2888ef9e9b4 100644
--- a/include/asm-arm/arch-omap/board-h2.h
+++ b/include/asm-arm/arch-omap/board-h2.h
@@ -34,9 +34,5 @@
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
#define OMAP1610_ETHR_START 0x04000300
-/* Samsung NAND flash at CS2B or CS3(NAND Boot) */
-#define OMAP_NAND_FLASH_START1 0x0A000000 /* CS2B */
-#define OMAP_NAND_FLASH_START2 0x0C000000 /* CS3 */
-
#endif /* __ASM_ARCH_OMAP_H2_H */
diff --git a/include/asm-arm/arch-omap/board-h3.h b/include/asm-arm/arch-omap/board-h3.h
index 1b12c1dcc2fa..761ea0a17897 100644
--- a/include/asm-arm/arch-omap/board-h3.h
+++ b/include/asm-arm/arch-omap/board-h3.h
@@ -30,10 +30,6 @@
/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
#define OMAP1710_ETHR_START 0x04000300
-/* Samsung NAND flash at CS2B or CS3(NAND Boot) */
-#define OMAP_NAND_FLASH_START1 0x0A000000 /* CS2B */
-#define OMAP_NAND_FLASH_START2 0x0C000000 /* CS3 */
-
#define MAXIRQNUM (IH_BOARD_BASE)
#define MAXFIQNUM MAXIRQNUM
#define MAXSWINUM MAXIRQNUM
diff --git a/include/asm-arm/arch-omap/board-h4.h b/include/asm-arm/arch-omap/board-h4.h
index 33ea29a41654..7ef664bc9e33 100644
--- a/include/asm-arm/arch-omap/board-h4.h
+++ b/include/asm-arm/arch-omap/board-h4.h
@@ -33,12 +33,6 @@
/* GPMC CS1 */
#define OMAP24XX_ETHR_START 0x08000300
#define OMAP24XX_ETHR_GPIO_IRQ 92
-
-#define H4_CS0_BASE 0x04000000
-
-#define H4_CS0_BASE 0x04000000
-
-#define H4_CS0_BASE 0x04000000
-
+#define H4_CS0_BASE 0x04000000
#endif /* __ASM_ARCH_OMAP_H4_H */
diff --git a/include/asm-arm/arch-omap/board-netstar.h b/include/asm-arm/arch-omap/board-netstar.h
deleted file mode 100644
index 77cc0fb54d54..000000000000
--- a/include/asm-arm/arch-omap/board-netstar.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
- *
- * Hardware definitions for OMAP5910 based NetStar board.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_NETSTAR_H
-#define __ASM_ARCH_NETSTAR_H
-
-#include <asm/arch/tc.h>
-
-#define OMAP_NAND_FLASH_START1 OMAP_CS1_PHYS + (1 << 23)
-#define OMAP_NAND_FLASH_START2 OMAP_CS1_PHYS + (2 << 23)
-
-#endif /* __ASM_ARCH_NETSTAR_H */
diff --git a/include/asm-arm/arch-omap/board-nokia.h b/include/asm-arm/arch-omap/board-nokia.h
new file mode 100644
index 000000000000..72deea203493
--- /dev/null
+++ b/include/asm-arm/arch-omap/board-nokia.h
@@ -0,0 +1,54 @@
+/*
+ * linux/include/asm-arm/arch-omap/board-nokia.h
+ *
+ * Information structures for Nokia-specific board config data
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ */
+
+#ifndef _OMAP_BOARD_NOKIA_H
+#define _OMAP_BOARD_NOKIA_H
+
+#include <linux/types.h>
+
+#define OMAP_TAG_NOKIA_BT 0x4e01
+#define OMAP_TAG_WLAN_CX3110X 0x4e02
+#define OMAP_TAG_CBUS 0x4e03
+#define OMAP_TAG_EM_ASIC_BB5 0x4e04
+
+
+#define BT_CHIP_CSR 1
+#define BT_CHIP_TI 2
+
+#define BT_SYSCLK_12 1
+#define BT_SYSCLK_38_4 2
+
+struct omap_bluetooth_config {
+ u8 chip_type;
+ u8 bt_wakeup_gpio;
+ u8 host_wakeup_gpio;
+ u8 reset_gpio;
+ u8 bt_uart;
+ u8 bd_addr[6];
+ u8 bt_sysclk;
+};
+
+struct omap_wlan_cx3110x_config {
+ u8 chip_type;
+ s16 power_gpio;
+ s16 irq_gpio;
+ s16 spi_cs_gpio;
+};
+
+struct omap_cbus_config {
+ s16 clk_gpio;
+ s16 dat_gpio;
+ s16 sel_gpio;
+};
+
+struct omap_em_asic_bb5_config {
+ s16 retu_irq_gpio;
+ s16 tahvo_irq_gpio;
+};
+
+#endif
diff --git a/include/asm-arm/arch-omap/board-perseus2.h b/include/asm-arm/arch-omap/board-perseus2.h
index 691e52a52b43..eb74420cb439 100644
--- a/include/asm-arm/arch-omap/board-perseus2.h
+++ b/include/asm-arm/arch-omap/board-perseus2.h
@@ -42,8 +42,4 @@
#define NR_IRQS (MAXIRQNUM + 1)
-/* Samsung NAND flash at CS2B or CS3(NAND Boot) */
-#define OMAP_NAND_FLASH_START1 0x0A000000 /* CS2B */
-#define OMAP_NAND_FLASH_START2 0x0C000000 /* CS3 */
-
#endif
diff --git a/include/asm-arm/arch-omap/board.h b/include/asm-arm/arch-omap/board.h
index a0040cd86639..6d6240a4681c 100644
--- a/include/asm-arm/arch-omap/board.h
+++ b/include/asm-arm/arch-omap/board.h
@@ -21,9 +21,12 @@
#define OMAP_TAG_LCD 0x4f05
#define OMAP_TAG_GPIO_SWITCH 0x4f06
#define OMAP_TAG_UART 0x4f07
+#define OMAP_TAG_FBMEM 0x4f08
+#define OMAP_TAG_STI_CONSOLE 0x4f09
#define OMAP_TAG_BOOT_REASON 0x4f80
#define OMAP_TAG_FLASH_PART 0x4f81
+#define OMAP_TAG_VERSION_STR 0x4f82
struct omap_clock_config {
/* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
@@ -54,6 +57,11 @@ struct omap_serial_console_config {
u32 console_speed;
};
+struct omap_sti_console_config {
+ unsigned enable:1;
+ u8 channel;
+};
+
struct omap_usb_config {
/* Configure drivers according to the connectors on your board:
* - "A" connector (rectagular)
@@ -87,6 +95,13 @@ struct omap_lcd_config {
char ctrl_name[16];
};
+struct omap_fbmem_config {
+ u32 fb_sram_start;
+ u32 fb_sram_size;
+ u32 fb_sdram_start;
+ u32 fb_sdram_size;
+};
+
/* Cover:
* high -> closed
* low -> open
@@ -106,6 +121,12 @@ struct omap_gpio_switch_config {
int key_code:24; /* Linux key code */
};
+struct omap_uart_config {
+ /* Bit field of UARTs present; bit 0 --> UART1 */
+ unsigned int enabled_uarts;
+};
+
+
struct omap_flash_part_config {
char part_table[0];
};
@@ -114,11 +135,14 @@ struct omap_boot_reason_config {
char reason_str[12];
};
-struct omap_uart_config {
- /* Bit field of UARTs present; bit 0 --> UART1 */
- unsigned int enabled_uarts;
+struct omap_version_config {
+ char component[12];
+ char version[12];
};
+
+#include <asm-arm/arch-omap/board-nokia.h>
+
struct omap_board_config_entry {
u16 tag;
u16 len;
diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h
index 46a0402696de..3c4eb9fbe48a 100644
--- a/include/asm-arm/arch-omap/clock.h
+++ b/include/asm-arm/arch-omap/clock.h
@@ -19,6 +19,7 @@ struct clk {
struct list_head node;
struct module *owner;
const char *name;
+ int id;
struct clk *parent;
unsigned long rate;
__u32 flags;
@@ -57,6 +58,7 @@ extern void propagate_rate(struct clk *clk);
extern void followparent_recalc(struct clk * clk);
extern void clk_allow_idle(struct clk *clk);
extern void clk_deny_idle(struct clk *clk);
+extern int clk_get_usecount(struct clk *clk);
/* Clock flags */
#define RATE_CKCTL (1 << 0) /* Main fixed ratio clocks */
@@ -80,10 +82,11 @@ extern void clk_deny_idle(struct clk *clk);
#define CM_PLL_SEL1 (1 << 18)
#define CM_PLL_SEL2 (1 << 19)
#define CM_SYSCLKOUT_SEL1 (1 << 20)
-#define CLOCK_IN_OMAP730 (1 << 21)
-#define CLOCK_IN_OMAP1510 (1 << 22)
-#define CLOCK_IN_OMAP16XX (1 << 23)
-#define CLOCK_IN_OMAP242X (1 << 24)
-#define CLOCK_IN_OMAP243X (1 << 25)
+#define CLOCK_IN_OMAP310 (1 << 21)
+#define CLOCK_IN_OMAP730 (1 << 22)
+#define CLOCK_IN_OMAP1510 (1 << 23)
+#define CLOCK_IN_OMAP16XX (1 << 24)
+#define CLOCK_IN_OMAP242X (1 << 25)
+#define CLOCK_IN_OMAP243X (1 << 26)
#endif
diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h
index d4e73efcb816..ca1202312a45 100644
--- a/include/asm-arm/arch-omap/dma.h
+++ b/include/asm-arm/arch-omap/dma.h
@@ -404,6 +404,7 @@ extern void omap_free_lcd_dma(void);
extern void omap_setup_lcd_dma(void);
extern void omap_enable_lcd_dma(void);
extern void omap_stop_lcd_dma(void);
+extern int omap_lcd_dma_ext_running(void);
extern void omap_set_lcd_dma_ext_controller(int external);
extern void omap_set_lcd_dma_single_transfer(int single);
extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
diff --git a/include/asm-arm/arch-omap/dmtimer.h b/include/asm-arm/arch-omap/dmtimer.h
index 11772c792f3e..e6522e6a3834 100644
--- a/include/asm-arm/arch-omap/dmtimer.h
+++ b/include/asm-arm/arch-omap/dmtimer.h
@@ -88,5 +88,6 @@ unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer);
void omap_dm_timer_reset_counter(struct omap_dm_timer *timer);
int omap_dm_timers_active(void);
+u32 omap_dm_timer_modify_idlect_mask(u32 inputmask);
#endif /* __ASM_ARCH_TIMER_H */
diff --git a/include/asm-arm/arch-omap/dsp.h b/include/asm-arm/arch-omap/dsp.h
index 57bf4f39ca58..06dad83dd41f 100644
--- a/include/asm-arm/arch-omap/dsp.h
+++ b/include/asm-arm/arch-omap/dsp.h
@@ -181,10 +181,16 @@ struct omap_dsp_varinfo {
#define OMAP_DSP_MBCMD_PM_ENABLE 0x01
#define OMAP_DSP_MBCMD_KFUNC_FBCTL 0x00
+#define OMAP_DSP_MBCMD_KFUNC_AUDIO_PWR 0x01
+#define OMAP_DSP_MBCMD_FBCTL_UPD 0x0000
#define OMAP_DSP_MBCMD_FBCTL_ENABLE 0x0002
#define OMAP_DSP_MBCMD_FBCTL_DISABLE 0x0003
+#define OMAP_DSP_MBCMD_AUDIO_PWR_UP 0x0000
+#define OMAP_DSP_MBCMD_AUDIO_PWR_DOWN1 0x0001
+#define OMAP_DSP_MBCMD_AUDIO_PWR_DOWN2 0x0002
+
#define OMAP_DSP_MBCMD_TDEL_SAFE 0x0000
#define OMAP_DSP_MBCMD_TDEL_KILL 0x0001
diff --git a/include/asm-arm/arch-omap/dsp_common.h b/include/asm-arm/arch-omap/dsp_common.h
index 4fcce6944056..16a459dfa714 100644
--- a/include/asm-arm/arch-omap/dsp_common.h
+++ b/include/asm-arm/arch-omap/dsp_common.h
@@ -27,11 +27,12 @@
#ifndef ASM_ARCH_DSP_COMMON_H
#define ASM_ARCH_DSP_COMMON_H
-void omap_dsp_pm_suspend(void);
-void omap_dsp_pm_resume(void);
-void omap_dsp_request_mpui(void);
-void omap_dsp_release_mpui(void);
-int omap_dsp_request_mem(void);
-int omap_dsp_release_mem(void);
+extern void omap_dsp_request_mpui(void);
+extern void omap_dsp_release_mpui(void);
+extern int omap_dsp_request_mem(void);
+extern int omap_dsp_release_mem(void);
+
+extern void (*omap_dsp_audio_pwr_up_request)(int stage);
+extern void (*omap_dsp_audio_pwr_down_request)(int stage);
#endif /* ASM_ARCH_DSP_COMMON_H */
diff --git a/include/asm-arm/arch-omap/gpioexpander.h b/include/asm-arm/arch-omap/gpioexpander.h
new file mode 100644
index 000000000000..7a43b0a912e4
--- /dev/null
+++ b/include/asm-arm/arch-omap/gpioexpander.h
@@ -0,0 +1,24 @@
+/*
+ * linux/include/asm-arm/arch-omap/gpioexpander.h
+ *
+ *
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPIOEXPANDER_H
+#define __ASM_ARCH_OMAP_GPIOEXPANDER_H
+
+/* Function Prototypes for GPIO Expander functions */
+
+int read_gpio_expa(u8 *, int);
+int write_gpio_expa(u8 , int);
+
+#endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */
diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h
index 5406b875c422..7909b729826c 100644
--- a/include/asm-arm/arch-omap/hardware.h
+++ b/include/asm-arm/arch-omap/hardware.h
@@ -306,6 +306,10 @@
#include "board-h4.h"
#endif
+#ifdef CONFIG_MACH_OMAP_APOLLON
+#include "board-apollon.h"
+#endif
+
#ifdef CONFIG_MACH_OMAP_OSK
#include "board-osk.h"
#endif
@@ -314,10 +318,6 @@
#include "board-voiceblue.h"
#endif
-#ifdef CONFIG_MACH_NETSTAR
-#include "board-netstar.h"
-#endif
-
#endif /* !__ASSEMBLER__ */
#endif /* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/include/asm-arm/arch-omap/irda.h b/include/asm-arm/arch-omap/irda.h
new file mode 100644
index 000000000000..805ae3575e44
--- /dev/null
+++ b/include/asm-arm/arch-omap/irda.h
@@ -0,0 +1,36 @@
+/*
+ * linux/include/asm-arm/arch-omap/irda.h
+ *
+ * Copyright (C) 2005-2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_IRDA_H
+#define ASMARM_ARCH_IRDA_H
+
+/* board specific transceiver capabilities */
+
+#define IR_SEL 1 /* Selects IrDA */
+#define IR_SIRMODE 2
+#define IR_FIRMODE 4
+#define IR_MIRMODE 8
+
+struct omap_irda_config {
+ int transceiver_cap;
+ int (*transceiver_mode)(struct device *dev, int mode);
+ int (*select_irda)(struct device *dev, int state);
+ /* Very specific to the needs of some platforms (h3,h4)
+ * having calls which can sleep in irda_set_speed.
+ */
+ struct work_struct gpio_expa;
+ int rx_channel;
+ int tx_channel;
+ unsigned long dest_start;
+ unsigned long src_start;
+ int tx_trigger;
+ int rx_trigger;
+};
+
+#endif
diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h
index 4ffce1d77759..42098d99f302 100644
--- a/include/asm-arm/arch-omap/irqs.h
+++ b/include/asm-arm/arch-omap/irqs.h
@@ -242,6 +242,11 @@
#define INT_24XX_GPIO_BANK2 30
#define INT_24XX_GPIO_BANK3 31
#define INT_24XX_GPIO_BANK4 32
+#define INT_24XX_MCBSP1_IRQ_TX 59
+#define INT_24XX_MCBSP1_IRQ_RX 60
+#define INT_24XX_MCBSP2_IRQ_TX 62
+#define INT_24XX_MCBSP2_IRQ_RX 63
+#define INT_24XX_UART3_IRQ 74
/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
* 16 MPUIO lines */
diff --git a/include/asm-arm/arch-omap/keypad.h b/include/asm-arm/arch-omap/keypad.h
new file mode 100644
index 000000000000..8a023a984acb
--- /dev/null
+++ b/include/asm-arm/arch-omap/keypad.h
@@ -0,0 +1,36 @@
+/*
+ * linux/include/asm-arm/arch-omap/keypad.h
+ *
+ * Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_KEYPAD_H
+#define ASMARM_ARCH_KEYPAD_H
+
+struct omap_kp_platform_data {
+ int rows;
+ int cols;
+ int *keymap;
+ unsigned int rep:1;
+ /* specific to OMAP242x*/
+ unsigned int *row_gpios;
+ unsigned int *col_gpios;
+};
+
+/* Group (0..3) -- when multiple keys are pressed, only the
+ * keys pressed in the same group are considered as pressed. This is
+ * in order to workaround certain crappy HW designs that produce ghost
+ * keypresses. */
+#define GROUP_0 (0 << 16)
+#define GROUP_1 (1 << 16)
+#define GROUP_2 (2 << 16)
+#define GROUP_3 (3 << 16)
+#define GROUP_MASK GROUP_3
+
+#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
+
+#endif
+
diff --git a/include/asm-arm/arch-omap/lcd_lph8923.h b/include/asm-arm/arch-omap/lcd_lph8923.h
new file mode 100644
index 000000000000..004e67e22ca7
--- /dev/null
+++ b/include/asm-arm/arch-omap/lcd_lph8923.h
@@ -0,0 +1,14 @@
+#ifndef __LCD_LPH8923_H
+#define __LCD_LPH8923_H
+
+enum lcd_lph8923_test_num {
+ LCD_LPH8923_TEST_RGB_LINES,
+};
+
+enum lcd_lph8923_test_result {
+ LCD_LPH8923_TEST_SUCCESS,
+ LCD_LPH8923_TEST_INVALID,
+ LCD_LPH8923_TEST_FAILED,
+};
+
+#endif
diff --git a/include/asm-arm/arch-omap/mcbsp.h b/include/asm-arm/arch-omap/mcbsp.h
index e79d98ab2ab6..ed0dde4f7219 100644
--- a/include/asm-arm/arch-omap/mcbsp.h
+++ b/include/asm-arm/arch-omap/mcbsp.h
@@ -37,6 +37,11 @@
#define OMAP1610_MCBSP2_BASE 0xfffb1000
#define OMAP1610_MCBSP3_BASE 0xe1017000
+#define OMAP24XX_MCBSP1_BASE 0x48074000
+#define OMAP24XX_MCBSP2_BASE 0x48076000
+
+#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730)
+
#define OMAP_MCBSP_REG_DRR2 0x00
#define OMAP_MCBSP_REG_DRR1 0x02
#define OMAP_MCBSP_REG_DXR2 0x04
@@ -71,9 +76,62 @@
#define OMAP_MAX_MCBSP_COUNT 3
+#define AUDIO_MCBSP_DATAWRITE (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1)
+#define AUDIO_MCBSP_DATAREAD (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1)
+
+#define AUDIO_MCBSP OMAP_MCBSP1
+#define AUDIO_DMA_TX OMAP_DMA_MCBSP1_TX
+#define AUDIO_DMA_RX OMAP_DMA_MCBSP1_RX
+
+#elif defined(CONFIG_ARCH_OMAP24XX)
+
+#define OMAP_MCBSP_REG_DRR2 0x00
+#define OMAP_MCBSP_REG_DRR1 0x04
+#define OMAP_MCBSP_REG_DXR2 0x08
+#define OMAP_MCBSP_REG_DXR1 0x0C
+#define OMAP_MCBSP_REG_SPCR2 0x10
+#define OMAP_MCBSP_REG_SPCR1 0x14
+#define OMAP_MCBSP_REG_RCR2 0x18
+#define OMAP_MCBSP_REG_RCR1 0x1C
+#define OMAP_MCBSP_REG_XCR2 0x20
+#define OMAP_MCBSP_REG_XCR1 0x24
+#define OMAP_MCBSP_REG_SRGR2 0x28
+#define OMAP_MCBSP_REG_SRGR1 0x2C
+#define OMAP_MCBSP_REG_MCR2 0x30
+#define OMAP_MCBSP_REG_MCR1 0x34
+#define OMAP_MCBSP_REG_RCERA 0x38
+#define OMAP_MCBSP_REG_RCERB 0x3C
+#define OMAP_MCBSP_REG_XCERA 0x40
+#define OMAP_MCBSP_REG_XCERB 0x44
+#define OMAP_MCBSP_REG_PCR0 0x48
+#define OMAP_MCBSP_REG_RCERC 0x4C
+#define OMAP_MCBSP_REG_RCERD 0x50
+#define OMAP_MCBSP_REG_XCERC 0x54
+#define OMAP_MCBSP_REG_XCERD 0x58
+#define OMAP_MCBSP_REG_RCERE 0x5C
+#define OMAP_MCBSP_REG_RCERF 0x60
+#define OMAP_MCBSP_REG_XCERE 0x64
+#define OMAP_MCBSP_REG_XCERF 0x68
+#define OMAP_MCBSP_REG_RCERG 0x6C
+#define OMAP_MCBSP_REG_RCERH 0x70
+#define OMAP_MCBSP_REG_XCERG 0x74
+#define OMAP_MCBSP_REG_XCERH 0x78
+
+#define OMAP_MAX_MCBSP_COUNT 2
+
+#define AUDIO_MCBSP_DATAWRITE (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1)
+#define AUDIO_MCBSP_DATAREAD (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1)
+
+#define AUDIO_MCBSP OMAP_MCBSP2
+#define AUDIO_DMA_TX OMAP24XX_DMA_MCBSP2_TX
+#define AUDIO_DMA_RX OMAP24XX_DMA_MCBSP2_RX
+
+#endif
+
#define OMAP_MCBSP_READ(base, reg) __raw_readw((base) + OMAP_MCBSP_REG_##reg)
#define OMAP_MCBSP_WRITE(base, reg, val) __raw_writew((val), (base) + OMAP_MCBSP_REG_##reg)
+
/************************** McBSP SPCR1 bit definitions ***********************/
#define RRST 0x0001
#define RRDY 0x0002
@@ -195,6 +253,10 @@ typedef enum {
OMAP_MCBSP3,
} omap_mcbsp_id;
+typedef int __bitwise omap_mcbsp_io_type_t;
+#define OMAP_MCBSP_IRQ_IO ((__force omap_mcbsp_io_type_t) 1)
+#define OMAP_MCBSP_POLL_IO ((__force omap_mcbsp_io_type_t) 2)
+
typedef enum {
OMAP_MCBSP_WORD_8 = 0,
OMAP_MCBSP_WORD_12,
@@ -246,6 +308,9 @@ u32 omap_mcbsp_recv_word(unsigned int id);
int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
+int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word);
+int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word);
+
/* SPI specific API */
void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg);
diff --git a/include/asm-arm/arch-omap/mcspi.h b/include/asm-arm/arch-omap/mcspi.h
new file mode 100644
index 000000000000..9e7f40a88e1b
--- /dev/null
+++ b/include/asm-arm/arch-omap/mcspi.h
@@ -0,0 +1,16 @@
+#ifndef _OMAP2_MCSPI_H
+#define _OMAP2_MCSPI_H
+
+struct omap2_mcspi_platform_config {
+ unsigned long base;
+ unsigned short num_cs;
+};
+
+struct omap2_mcspi_device_config {
+ unsigned turbo_mode:1;
+
+ /* Do we want one channel enabled at the same time? */
+ unsigned single_channel:1;
+};
+
+#endif
diff --git a/include/asm-arm/arch-omap/menelaus.h b/include/asm-arm/arch-omap/menelaus.h
index 46be8b8d6346..88cd4c87f0de 100644
--- a/include/asm-arm/arch-omap/menelaus.h
+++ b/include/asm-arm/arch-omap/menelaus.h
@@ -7,7 +7,7 @@
#ifndef __ASM_ARCH_MENELAUS_H
#define __ASM_ARCH_MENELAUS_H
-extern void menelaus_mmc_register(void (*callback)(u8 card_mask),
+extern void menelaus_mmc_register(void (*callback)(unsigned long data, u8 card_mask),
unsigned long data);
extern void menelaus_mmc_remove(void);
extern void menelaus_mmc_opendrain(int enable);
diff --git a/include/asm-arm/arch-omap/mux.h b/include/asm-arm/arch-omap/mux.h
index 13415a9aab06..0dc24d4ba59c 100644
--- a/include/asm-arm/arch-omap/mux.h
+++ b/include/asm-arm/arch-omap/mux.h
@@ -112,14 +112,13 @@
* as mux config
*/
#define MUX_CFG_730(desc, mux_reg, mode_offset, mode, \
- pull_reg, pull_bit, pull_status, \
- pu_pd_reg, pu_pd_status, debug_status)\
+ pull_bit, pull_status, debug_status)\
{ \
.name = desc, \
.debug = debug_status, \
MUX_REG_730(mux_reg, mode_offset, mode) \
PULL_REG_730(mux_reg, pull_bit, pull_status) \
- PU_PD_REG(pu_pd_reg, pu_pd_status) \
+ PU_PD_REG(NA, 0) \
},
#define MUX_CFG_24XX(desc, reg_offset, mode, \
@@ -172,6 +171,11 @@ enum omap730_index {
E4_730_KBC2,
F4_730_KBC3,
E3_730_KBC4,
+
+ /* USB */
+ AA17_730_USB_DM,
+ W16_730_USB_PU_EN,
+ W17_730_USB_VBUSI,
};
enum omap1xxx_index {
@@ -403,9 +407,53 @@ enum omap24xx_index {
/* 24xx Menelaus interrupt */
W19_24XX_SYS_NIRQ,
+ /* 24xx clock */
+ W14_24XX_SYS_CLKOUT,
+
+ /* 242X McBSP */
+ Y15_24XX_MCBSP2_CLKX,
+ R14_24XX_MCBSP2_FSX,
+ W15_24XX_MCBSP2_DR,
+ V15_24XX_MCBSP2_DX,
+
/* 24xx GPIO */
+ M21_242X_GPIO11,
+ AA10_242X_GPIO13,
+ AA6_242X_GPIO14,
+ AA4_242X_GPIO15,
+ Y11_242X_GPIO16,
+ AA12_242X_GPIO17,
+ AA8_242X_GPIO58,
Y20_24XX_GPIO60,
+ W4__24XX_GPIO74,
M15_24XX_GPIO92,
+ V14_24XX_GPIO117,
+
+ P20_24XX_TSC_IRQ,
+
+ /* UART3 */
+ K15_24XX_UART3_TX,
+ K14_24XX_UART3_RX,
+
+ /* Keypad GPIO*/
+ T19_24XX_KBR0,
+ R19_24XX_KBR1,
+ V18_24XX_KBR2,
+ M21_24XX_KBR3,
+ E5__24XX_KBR4,
+ M18_24XX_KBR5,
+ R20_24XX_KBC0,
+ M14_24XX_KBC1,
+ H19_24XX_KBC2,
+ V17_24XX_KBC3,
+ P21_24XX_KBC4,
+ L14_24XX_KBC5,
+ N19_24XX_KBC6,
+
+ /* 24xx Menelaus Keypad GPIO */
+ B3__24XX_KBR5,
+ AA4_24XX_KBC2,
+ B13_24XX_KBC6,
};
#ifdef CONFIG_OMAP_MUX
diff --git a/include/asm-arm/arch-omap/omap-alsa.h b/include/asm-arm/arch-omap/omap-alsa.h
new file mode 100644
index 000000000000..df4695474e3d
--- /dev/null
+++ b/include/asm-arm/arch-omap/omap-alsa.h
@@ -0,0 +1,124 @@
+/*
+ * linux/include/asm-arm/arch-omap/omap-alsa.h
+ *
+ * Alsa Driver for AIC23 and TSC2101 codecs on OMAP platform boards.
+ *
+ * Copyright (C) 2006 Mika Laitio <lamikr@cc.jyu.fi>
+ *
+ * Copyright (C) 2005 Instituto Nokia de Tecnologia - INdT - Manaus Brazil
+ * Written by Daniel Petrini, David Cohen, Anderson Briglia
+ * {daniel.petrini, david.cohen, anderson.briglia}@indt.org.br
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * History
+ * -------
+ *
+ * 2005/07/25 INdT-10LE Kernel Team - Alsa driver for omap osk,
+ * original version based in sa1100 driver
+ * and omap oss driver.
+ */
+
+#ifndef __OMAP_ALSA_H
+#define __OMAP_ALSA_H
+
+#include <sound/driver.h>
+#include <asm/arch/dma.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <asm/arch/mcbsp.h>
+#include <linux/platform_device.h>
+
+#define DMA_BUF_SIZE (1024 * 8)
+
+/*
+ * Buffer management for alsa and dma
+ */
+struct audio_stream {
+ char *id; /* identification string */
+ int stream_id; /* numeric identification */
+ int dma_dev; /* dma number of that device */
+ int *lch; /* Chain of channels this stream is linked to */
+ char started; /* to store if the chain was started or not */
+ int dma_q_head; /* DMA Channel Q Head */
+ int dma_q_tail; /* DMA Channel Q Tail */
+ char dma_q_count; /* DMA Channel Q Count */
+ int active:1; /* we are using this stream for transfer now */
+ int period; /* current transfer period */
+ int periods; /* current count of periods registerd in the DMA engine */
+ spinlock_t dma_lock; /* for locking in DMA operations */
+ snd_pcm_substream_t *stream; /* the pcm stream */
+ unsigned linked:1; /* dma channels linked */
+ int offset; /* store start position of the last period in the alsa buffer */
+ int (*hw_start)(void); /* interface to start HW interface, e.g. McBSP */
+ int (*hw_stop)(void); /* interface to stop HW interface, e.g. McBSP */
+};
+
+/*
+ * Alsa card structure for aic23
+ */
+struct snd_card_omap_codec {
+ snd_card_t *card;
+ snd_pcm_t *pcm;
+ long samplerate;
+ struct audio_stream s[2]; /* playback & capture */
+};
+
+/* Codec specific information and function pointers.
+ * Codec (omap-alsa-aic23.c and omap-alsa-tsc2101.c)
+ * are responsible for defining the function pointers.
+ */
+struct omap_alsa_codec_config {
+ char *name;
+ struct omap_mcbsp_reg_cfg *mcbsp_regs_alsa;
+ snd_pcm_hw_constraint_list_t *hw_constraints_rates;
+ snd_pcm_hardware_t *snd_omap_alsa_playback;
+ snd_pcm_hardware_t *snd_omap_alsa_capture;
+ void (*codec_configure_dev)(void);
+ void (*codec_set_samplerate)(long);
+ void (*codec_clock_setup)(void);
+ int (*codec_clock_on)(void);
+ int (*codec_clock_off)(void);
+ int (*get_default_samplerate)(void);
+};
+
+/*********** Mixer function prototypes *************************/
+int snd_omap_mixer(struct snd_card_omap_codec *);
+void snd_omap_init_mixer(void);
+
+#ifdef CONFIG_PM
+void snd_omap_suspend_mixer(void);
+void snd_omap_resume_mixer(void);
+#endif
+
+int snd_omap_alsa_post_probe(struct platform_device *pdev, struct omap_alsa_codec_config *config);
+int snd_omap_alsa_remove(struct platform_device *pdev);
+#ifdef CONFIG_PM
+int snd_omap_alsa_suspend(struct platform_device *pdev, pm_message_t state);
+int snd_omap_alsa_resume(struct platform_device *pdev);
+#else
+#define snd_omap_alsa_suspend NULL
+#define snd_omap_alsa_resume NULL
+#endif
+
+void callback_omap_alsa_sound_dma(void *);
+
+#endif
diff --git a/include/asm-arm/arch-omap/omapfb.h b/include/asm-arm/arch-omap/omapfb.h
index 4ba2622cc142..fccdb3db025f 100644
--- a/include/asm-arm/arch-omap/omapfb.h
+++ b/include/asm-arm/arch-omap/omapfb.h
@@ -34,9 +34,10 @@
#define OMAPFB_MIRROR OMAP_IOW(31, int)
#define OMAPFB_SYNC_GFX OMAP_IO(37)
#define OMAPFB_VSYNC OMAP_IO(38)
-#define OMAPFB_SET_UPDATE_MODE OMAP_IOW(40, enum omapfb_update_mode)
+#define OMAPFB_SET_UPDATE_MODE OMAP_IOW(40, int)
+#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(41, struct omapfb_update_window_old)
#define OMAPFB_GET_CAPS OMAP_IOR(42, unsigned long)
-#define OMAPFB_GET_UPDATE_MODE OMAP_IOW(43, enum omapfb_update_mode)
+#define OMAPFB_GET_UPDATE_MODE OMAP_IOW(43, int)
#define OMAPFB_LCD_TEST OMAP_IOW(45, int)
#define OMAPFB_CTRL_TEST OMAP_IOW(46, int)
#define OMAPFB_UPDATE_WINDOW OMAP_IOW(47, struct omapfb_update_window)
@@ -66,9 +67,14 @@ enum omapfb_color_format {
};
struct omapfb_update_window {
- u32 x, y;
- u32 width, height;
- u32 format;
+ __u32 x, y;
+ __u32 width, height;
+ __u32 format;
+};
+
+struct omapfb_update_window_old {
+ __u32 x, y;
+ __u32 width, height;
};
enum omapfb_plane {
@@ -83,17 +89,17 @@ enum omapfb_channel_out {
};
struct omapfb_setup_plane {
- u8 plane;
- u8 channel_out;
- u32 offset;
- u32 pos_x, pos_y;
- u32 width, height;
- u32 color_mode;
+ __u8 plane;
+ __u8 channel_out;
+ __u32 offset;
+ __u32 pos_x, pos_y;
+ __u32 width, height;
+ __u32 color_mode;
};
struct omapfb_enable_plane {
- u8 plane;
- u8 enable;
+ __u8 plane;
+ __u8 enable;
};
enum omapfb_color_key_type {
@@ -103,10 +109,10 @@ enum omapfb_color_key_type {
};
struct omapfb_color_key {
- u8 channel_out;
- u32 background;
- u32 trans_key;
- u8 key_type;
+ __u8 channel_out;
+ __u32 background;
+ __u32 trans_key;
+ __u8 key_type;
};
enum omapfb_update_mode {
@@ -120,6 +126,9 @@ enum omapfb_update_mode {
#include <linux/completion.h>
#include <linux/interrupt.h>
#include <linux/fb.h>
+#include <linux/mutex.h>
+
+#include <asm/arch/board.h>
#define OMAP_LCDC_INV_VSYNC 0x0001
#define OMAP_LCDC_INV_HSYNC 0x0002
@@ -184,19 +193,38 @@ struct extif_timings {
int re_cycle_time;
int cs_pulse_width;
int access_time;
+
+ int clk_div;
+
+ u32 tim[5]; /* set by extif->convert_timings */
+
+ int converted;
};
struct lcd_ctrl_extif {
int (*init) (void);
void (*cleanup) (void);
+ void (*get_clk_info) (u32 *clk_period, u32 *max_clk_div);
+ int (*convert_timings) (struct extif_timings *timings);
void (*set_timings) (const struct extif_timings *timings);
- void (*write_command) (u32 cmd);
- u32 (*read_data) (void);
- void (*write_data) (u32 data);
+ void (*set_bits_per_cycle)(int bpc);
+ void (*write_command) (const void *buf, unsigned int len);
+ void (*read_data) (void *buf, unsigned int len);
+ void (*write_data) (const void *buf, unsigned int len);
void (*transfer_area) (int width, int height,
void (callback)(void * data), void *data);
+ unsigned long max_transmit_size;
};
+struct omapfb_notifier_block {
+ struct notifier_block nb;
+ void *data;
+};
+
+typedef int (*omapfb_notifier_callback_t)(struct omapfb_notifier_block *,
+ unsigned long event,
+ struct omapfb_device *fbdev);
+
struct lcd_ctrl {
const char *name;
void *data;
@@ -204,9 +232,11 @@ struct lcd_ctrl {
int (*init) (struct omapfb_device *fbdev,
int ext_mode, int req_vram_size);
void (*cleanup) (void);
+ void (*bind_client) (struct omapfb_notifier_block *nb);
void (*get_vram_layout)(unsigned long *size,
void **virt_base,
dma_addr_t *phys_base);
+ int (*mmap) (struct vm_area_struct *vma);
unsigned long (*get_caps) (void);
int (*set_update_mode)(enum omapfb_update_mode mode);
enum omapfb_update_mode (*get_update_mode)(void);
@@ -240,7 +270,7 @@ struct omapfb_device {
int state;
int ext_lcdc; /* Using external
LCD controller */
- struct semaphore rqueue_sema;
+ struct mutex rqueue_mutex;
void *vram_virt_base;
dma_addr_t vram_phys_base;
@@ -261,12 +291,13 @@ struct omapfb_device {
struct device *dev;
};
-extern struct lcd_panel h3_panel;
-extern struct lcd_panel h2_panel;
-extern struct lcd_panel p2_panel;
-extern struct lcd_panel osk_panel;
-extern struct lcd_panel innovator1610_panel;
-extern struct lcd_panel innovator1510_panel;
+struct omapfb_platform_data {
+ struct omap_lcd_config lcd;
+ struct omap_fbmem_config fbmem;
+};
+
+#define OMAPFB_EVENT_READY 1
+#define OMAPFB_EVENT_DISABLED 2
#ifdef CONFIG_ARCH_OMAP1
extern struct lcd_ctrl omap1_lcd_ctrl;
@@ -274,7 +305,20 @@ extern struct lcd_ctrl omap1_lcd_ctrl;
extern struct lcd_ctrl omap2_disp_ctrl;
#endif
+extern void omapfb_register_panel(struct lcd_panel *panel);
extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
+extern void omapfb_notify_clients(struct omapfb_device *fbdev,
+ unsigned long event);
+extern int omapfb_register_client(struct omapfb_notifier_block *nb,
+ omapfb_notifier_callback_t callback,
+ void *callback_data);
+extern int omapfb_unregister_client(struct omapfb_notifier_block *nb);
+extern int omapfb_update_window_async(struct omapfb_update_window *win,
+ void (*callback)(void *),
+ void *callback_data);
+
+/* in arch/arm/plat-omap/devices.c */
+extern void omapfb_reserve_mem(void);
#endif /* __KERNEL__ */
diff --git a/include/asm-arm/arch-omap/param.h b/include/asm-arm/arch-omap/param.h
new file mode 100644
index 000000000000..face9ad41e97
--- /dev/null
+++ b/include/asm-arm/arch-omap/param.h
@@ -0,0 +1,8 @@
+/*
+ * linux/include/asm-arm/arch-omap/param.h
+ *
+ */
+
+#ifdef CONFIG_OMAP_32K_TIMER_HZ
+#define HZ CONFIG_OMAP_32K_TIMER_HZ
+#endif
diff --git a/include/asm-arm/arch-omap/pm.h b/include/asm-arm/arch-omap/pm.h
index 7c790425e363..05b003f3a94c 100644
--- a/include/asm-arm/arch-omap/pm.h
+++ b/include/asm-arm/arch-omap/pm.h
@@ -49,7 +49,7 @@
/*
* ----------------------------------------------------------------------------
- * Powermanagement bitmasks
+ * Power management bitmasks
* ----------------------------------------------------------------------------
*/
#define IDLE_WAIT_CYCLES 0x00000fff
@@ -112,32 +112,59 @@
#endif
#ifndef __ASSEMBLER__
+
+#include <linux/clk.h>
+
+extern void prevent_idle_sleep(void);
+extern void allow_idle_sleep(void);
+
+/**
+ * clk_deny_idle - Prevents the clock from being idled during MPU idle
+ * @clk: clock signal handle
+ */
+void clk_deny_idle(struct clk *clk);
+
+/**
+ * clk_allow_idle - Counters previous clk_deny_idle
+ * @clk: clock signal handle
+ */
+void clk_deny_idle(struct clk *clk);
+
extern void omap_pm_idle(void);
extern void omap_pm_suspend(void);
extern void omap730_cpu_suspend(unsigned short, unsigned short);
extern void omap1510_cpu_suspend(unsigned short, unsigned short);
extern void omap1610_cpu_suspend(unsigned short, unsigned short);
+extern void omap24xx_cpu_suspend(u32 dll_ctrl, u32 cpu_revision);
extern void omap730_idle_loop_suspend(void);
extern void omap1510_idle_loop_suspend(void);
extern void omap1610_idle_loop_suspend(void);
+extern void omap24xx_idle_loop_suspend(void);
+
+extern unsigned int omap730_cpu_suspend_sz;
+extern unsigned int omap1510_cpu_suspend_sz;
+extern unsigned int omap1610_cpu_suspend_sz;
+extern unsigned int omap24xx_cpu_suspend_sz;
+extern unsigned int omap730_idle_loop_suspend_sz;
+extern unsigned int omap1510_idle_loop_suspend_sz;
+extern unsigned int omap1610_idle_loop_suspend_sz;
+extern unsigned int omap24xx_idle_loop_suspend_sz;
#ifdef CONFIG_OMAP_SERIAL_WAKE
extern void omap_serial_wake_trigger(int enable);
#else
+#define omap_serial_wakeup_init() {}
#define omap_serial_wake_trigger(x) {}
#endif /* CONFIG_OMAP_SERIAL_WAKE */
-extern unsigned int omap730_cpu_suspend_sz;
-extern unsigned int omap730_idle_loop_suspend_sz;
-extern unsigned int omap1510_cpu_suspend_sz;
-extern unsigned int omap1510_idle_loop_suspend_sz;
-extern unsigned int omap1610_cpu_suspend_sz;
-extern unsigned int omap1610_idle_loop_suspend_sz;
-
#define ARM_SAVE(x) arm_sleep_save[ARM_SLEEP_SAVE_##x] = omap_readl(x)
#define ARM_RESTORE(x) omap_writel((arm_sleep_save[ARM_SLEEP_SAVE_##x]), (x))
#define ARM_SHOW(x) arm_sleep_save[ARM_SLEEP_SAVE_##x]
+#define DSP_SAVE(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x] = __raw_readw(x)
+#define DSP_RESTORE(x) __raw_writew((dsp_sleep_save[DSP_SLEEP_SAVE_##x]), (x))
+#define DSP_SHOW(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x]
+
#define ULPD_SAVE(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] = omap_readw(x)
#define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x))
#define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]
@@ -154,6 +181,10 @@ extern unsigned int omap1610_idle_loop_suspend_sz;
#define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x))
#define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]
+#define OMAP24XX_SAVE(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] = x
+#define OMAP24XX_RESTORE(x) x = omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
+#define OMAP24XX_SHOW(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
+
/*
* List of global OMAP registers to preserve.
* More ones like CP and general purpose register values are preserved
@@ -176,6 +207,15 @@ enum arm_save_state {
ARM_SLEEP_SAVE_SIZE
};
+enum dsp_save_state {
+ DSP_SLEEP_SAVE_START = 0,
+ /*
+ * DSP registers 16 bits
+ */
+ DSP_SLEEP_SAVE_DSP_IDLECT2,
+ DSP_SLEEP_SAVE_SIZE
+};
+
enum ulpd_save_state {
ULPD_SLEEP_SAVE_START = 0,
/*
@@ -254,5 +294,30 @@ enum mpui1610_save_state {
#endif
};
+enum omap24xx_save_state {
+ OMAP24XX_SLEEP_SAVE_START = 0,
+ OMAP24XX_SLEEP_SAVE_INTC_MIR0,
+ OMAP24XX_SLEEP_SAVE_INTC_MIR1,
+ OMAP24XX_SLEEP_SAVE_INTC_MIR2,
+ OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE,
+ OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1,
+ OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1,
+ OMAP24XX_SLEEP_SAVE_GPIO3_IRQENABLE1,
+ OMAP24XX_SLEEP_SAVE_GPIO4_IRQENABLE1,
+ OMAP24XX_SLEEP_SAVE_GPIO3_OE,
+ OMAP24XX_SLEEP_SAVE_GPIO4_OE,
+ OMAP24XX_SLEEP_SAVE_GPIO3_RISINGDETECT,
+ OMAP24XX_SLEEP_SAVE_GPIO3_FALLINGDETECT,
+ OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SPI1_NCS2,
+ OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_MCBSP1_DX,
+ OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SSI1_FLAG_TX,
+ OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SYS_NIRQW0,
+ OMAP24XX_SLEEP_SAVE_SIZE
+};
+
#endif /* ASSEMBLER */
#endif /* __ASM_ARCH_OMAP_PM_H */
diff --git a/include/asm-arm/arch-omap/prcm.h b/include/asm-arm/arch-omap/prcm.h
index 7b48a5cbb15f..7bcaf94bde9f 100644
--- a/include/asm-arm/arch-omap/prcm.h
+++ b/include/asm-arm/arch-omap/prcm.h
@@ -1,5 +1,7 @@
/*
- * prcm.h - Access definations for use in OMAP24XX clock and power management
+ * linux/include/asm-arm/arch-omap/prcm.h
+ *
+ * Access definations for use in OMAP24XX clock and power management
*
* Copyright (C) 2005 Texas Instruments, Inc.
*
@@ -21,405 +23,7 @@
#ifndef __ASM_ARM_ARCH_DPM_PRCM_H
#define __ASM_ARM_ARCH_DPM_PRCM_H
-/* SET_PERFORMANCE_LEVEL PARAMETERS */
-#define PRCM_HALF_SPEED 1
-#define PRCM_FULL_SPEED 2
-
-#ifndef __ASSEMBLER__
-
-#define PRCM_REG32(offset) __REG32(OMAP24XX_PRCM_BASE + (offset))
-
-#define PRCM_REVISION PRCM_REG32(0x000)
-#define PRCM_SYSCONFIG PRCM_REG32(0x010)
-#define PRCM_IRQSTATUS_MPU PRCM_REG32(0x018)
-#define PRCM_IRQENABLE_MPU PRCM_REG32(0x01C)
-#define PRCM_VOLTCTRL PRCM_REG32(0x050)
-#define PRCM_VOLTST PRCM_REG32(0x054)
-#define PRCM_CLKSRC_CTRL PRCM_REG32(0x060)
-#define PRCM_CLKOUT_CTRL PRCM_REG32(0x070)
-#define PRCM_CLKEMUL_CTRL PRCM_REG32(0x078)
-#define PRCM_CLKCFG_CTRL PRCM_REG32(0x080)
-#define PRCM_CLKCFG_STATUS PRCM_REG32(0x084)
-#define PRCM_VOLTSETUP PRCM_REG32(0x090)
-#define PRCM_CLKSSETUP PRCM_REG32(0x094)
-#define PRCM_POLCTRL PRCM_REG32(0x098)
-
-/* GENERAL PURPOSE */
-#define GENERAL_PURPOSE1 PRCM_REG32(0x0B0)
-#define GENERAL_PURPOSE2 PRCM_REG32(0x0B4)
-#define GENERAL_PURPOSE3 PRCM_REG32(0x0B8)
-#define GENERAL_PURPOSE4 PRCM_REG32(0x0BC)
-#define GENERAL_PURPOSE5 PRCM_REG32(0x0C0)
-#define GENERAL_PURPOSE6 PRCM_REG32(0x0C4)
-#define GENERAL_PURPOSE7 PRCM_REG32(0x0C8)
-#define GENERAL_PURPOSE8 PRCM_REG32(0x0CC)
-#define GENERAL_PURPOSE9 PRCM_REG32(0x0D0)
-#define GENERAL_PURPOSE10 PRCM_REG32(0x0D4)
-#define GENERAL_PURPOSE11 PRCM_REG32(0x0D8)
-#define GENERAL_PURPOSE12 PRCM_REG32(0x0DC)
-#define GENERAL_PURPOSE13 PRCM_REG32(0x0E0)
-#define GENERAL_PURPOSE14 PRCM_REG32(0x0E4)
-#define GENERAL_PURPOSE15 PRCM_REG32(0x0E8)
-#define GENERAL_PURPOSE16 PRCM_REG32(0x0EC)
-#define GENERAL_PURPOSE17 PRCM_REG32(0x0F0)
-#define GENERAL_PURPOSE18 PRCM_REG32(0x0F4)
-#define GENERAL_PURPOSE19 PRCM_REG32(0x0F8)
-#define GENERAL_PURPOSE20 PRCM_REG32(0x0FC)
-
-/* MPU */
-#define CM_CLKSEL_MPU PRCM_REG32(0x140)
-#define CM_CLKSTCTRL_MPU PRCM_REG32(0x148)
-#define RM_RSTST_MPU PRCM_REG32(0x158)
-#define PM_WKDEP_MPU PRCM_REG32(0x1C8)
-#define PM_EVGENCTRL_MPU PRCM_REG32(0x1D4)
-#define PM_EVEGENONTIM_MPU PRCM_REG32(0x1D8)
-#define PM_EVEGENOFFTIM_MPU PRCM_REG32(0x1DC)
-#define PM_PWSTCTRL_MPU PRCM_REG32(0x1E0)
-#define PM_PWSTST_MPU PRCM_REG32(0x1E4)
-
-/* CORE */
-#define CM_FCLKEN1_CORE PRCM_REG32(0x200)
-#define CM_FCLKEN2_CORE PRCM_REG32(0x204)
-#define CM_FCLKEN3_CORE PRCM_REG32(0x208)
-#define CM_ICLKEN1_CORE PRCM_REG32(0x210)
-#define CM_ICLKEN2_CORE PRCM_REG32(0x214)
-#define CM_ICLKEN3_CORE PRCM_REG32(0x218)
-#define CM_ICLKEN4_CORE PRCM_REG32(0x21C)
-#define CM_IDLEST1_CORE PRCM_REG32(0x220)
-#define CM_IDLEST2_CORE PRCM_REG32(0x224)
-#define CM_IDLEST3_CORE PRCM_REG32(0x228)
-#define CM_IDLEST4_CORE PRCM_REG32(0x22C)
-#define CM_AUTOIDLE1_CORE PRCM_REG32(0x230)
-#define CM_AUTOIDLE2_CORE PRCM_REG32(0x234)
-#define CM_AUTOIDLE3_CORE PRCM_REG32(0x238)
-#define CM_AUTOIDLE4_CORE PRCM_REG32(0x23C)
-#define CM_CLKSEL1_CORE PRCM_REG32(0x240)
-#define CM_CLKSEL2_CORE PRCM_REG32(0x244)
-#define CM_CLKSTCTRL_CORE PRCM_REG32(0x248)
-#define PM_WKEN1_CORE PRCM_REG32(0x2A0)
-#define PM_WKEN2_CORE PRCM_REG32(0x2A4)
-#define PM_WKST1_CORE PRCM_REG32(0x2B0)
-#define PM_WKST2_CORE PRCM_REG32(0x2B4)
-#define PM_WKDEP_CORE PRCM_REG32(0x2C8)
-#define PM_PWSTCTRL_CORE PRCM_REG32(0x2E0)
-#define PM_PWSTST_CORE PRCM_REG32(0x2E4)
-
-/* GFX */
-#define CM_FCLKEN_GFX PRCM_REG32(0x300)
-#define CM_ICLKEN_GFX PRCM_REG32(0x310)
-#define CM_IDLEST_GFX PRCM_REG32(0x320)
-#define CM_CLKSEL_GFX PRCM_REG32(0x340)
-#define CM_CLKSTCTRL_GFX PRCM_REG32(0x348)
-#define RM_RSTCTRL_GFX PRCM_REG32(0x350)
-#define RM_RSTST_GFX PRCM_REG32(0x358)
-#define PM_WKDEP_GFX PRCM_REG32(0x3C8)
-#define PM_PWSTCTRL_GFX PRCM_REG32(0x3E0)
-#define PM_PWSTST_GFX PRCM_REG32(0x3E4)
-
-/* WAKE-UP */
-#define CM_FCLKEN_WKUP PRCM_REG32(0x400)
-#define CM_ICLKEN_WKUP PRCM_REG32(0x410)
-#define CM_IDLEST_WKUP PRCM_REG32(0x420)
-#define CM_AUTOIDLE_WKUP PRCM_REG32(0x430)
-#define CM_CLKSEL_WKUP PRCM_REG32(0x440)
-#define RM_RSTCTRL_WKUP PRCM_REG32(0x450)
-#define RM_RSTTIME_WKUP PRCM_REG32(0x454)
-#define RM_RSTST_WKUP PRCM_REG32(0x458)
-#define PM_WKEN_WKUP PRCM_REG32(0x4A0)
-#define PM_WKST_WKUP PRCM_REG32(0x4B0)
-
-/* CLOCKS */
-#define CM_CLKEN_PLL PRCM_REG32(0x500)
-#define CM_IDLEST_CKGEN PRCM_REG32(0x520)
-#define CM_AUTOIDLE_PLL PRCM_REG32(0x530)
-#define CM_CLKSEL1_PLL PRCM_REG32(0x540)
-#define CM_CLKSEL2_PLL PRCM_REG32(0x544)
-
-/* DSP */
-#define CM_FCLKEN_DSP PRCM_REG32(0x800)
-#define CM_ICLKEN_DSP PRCM_REG32(0x810)
-#define CM_IDLEST_DSP PRCM_REG32(0x820)
-#define CM_AUTOIDLE_DSP PRCM_REG32(0x830)
-#define CM_CLKSEL_DSP PRCM_REG32(0x840)
-#define CM_CLKSTCTRL_DSP PRCM_REG32(0x848)
-#define RM_RSTCTRL_DSP PRCM_REG32(0x850)
-#define RM_RSTST_DSP PRCM_REG32(0x858)
-#define PM_WKEN_DSP PRCM_REG32(0x8A0)
-#define PM_WKDEP_DSP PRCM_REG32(0x8C8)
-#define PM_PWSTCTRL_DSP PRCM_REG32(0x8E0)
-#define PM_PWSTST_DSP PRCM_REG32(0x8E4)
-#define PRCM_IRQSTATUS_DSP PRCM_REG32(0x8F0)
-#define PRCM_IRQENABLE_DSP PRCM_REG32(0x8F4)
-
-/* IVA */
-#define PRCM_IRQSTATUS_IVA PRCM_REG32(0x8F8)
-#define PRCM_IRQENABLE_IVA PRCM_REG32(0x8FC)
-
-/* Modem on 2430 */
-#define CM_FCLKEN_MDM PRCM_REG32(0xC00)
-#define CM_ICLKEN_MDM PRCM_REG32(0xC10)
-#define CM_IDLEST_MDM PRCM_REG32(0xC20)
-#define CM_CLKSEL_MDM PRCM_REG32(0xC40)
-
-/* FIXME: Move to header for 2430 */
-#define DISP_BASE (OMAP24XX_L4_IO_BASE+0x50000)
-#define DISP_REG32(offset) __REG32(DISP_BASE + (offset))
-
-#define OMAP24XX_GPMC_BASE (L3_24XX_BASE + 0xa000)
-#define GPMC_BASE (OMAP24XX_GPMC_BASE)
-#define GPMC_REG32(offset) __REG32(GPMC_BASE + (offset))
-
-#define GPT1_BASE (OMAP24XX_GPT1)
-#define GPT1_REG32(offset) __REG32(GPT1_BASE + (offset))
-
-/* Misc sysconfig */
-#define DISPC_SYSCONFIG DISP_REG32(0x410)
-#define SPI_BASE (OMAP24XX_L4_IO_BASE+0x98000)
-#define MCSPI1_SYSCONFIG __REG32(SPI_BASE + 0x10)
-#define MCSPI2_SYSCONFIG __REG32(SPI_BASE+0x2000 + 0x10)
-
-//#define DSP_MMU_SYSCONFIG 0x5A000010
-#define CAMERA_MMU_SYSCONFIG __REG32(DISP_BASE+0x2C10)
-//#define IVA_MMU_SYSCONFIG 0x5D000010
-//#define DSP_DMA_SYSCONFIG 0x00FCC02C
-#define CAMERA_DMA_SYSCONFIG __REG32(DISP_BASE+0x282C)
-#define SYSTEM_DMA_SYSCONFIG __REG32(DISP_BASE+0x602C)
-#define GPMC_SYSCONFIG GPMC_REG32(0x010)
-#define MAILBOXES_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x94010)
-#define UART1_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6A054)
-#define UART2_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6C054)
-#define UART3_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6E054)
-//#define IVA_SYSCONFIG 0x5C060010
-#define SDRC_SYSCONFIG __REG32(OMAP24XX_SDRC_BASE+0x10)
-#define SMS_SYSCONFIG __REG32(OMAP24XX_SMS_BASE+0x10)
-#define SSI_SYSCONFIG __REG32(DISP_BASE+0x8010)
-//#define VLYNQ_SYSCONFIG 0x67FFFE10
-
-/* rkw - good cannidates for PM_ to start what nm was trying */
-#define OMAP24XX_GPT2 (OMAP24XX_L4_IO_BASE+0x2A000)
-#define OMAP24XX_GPT3 (OMAP24XX_L4_IO_BASE+0x78000)
-#define OMAP24XX_GPT4 (OMAP24XX_L4_IO_BASE+0x7A000)
-#define OMAP24XX_GPT5 (OMAP24XX_L4_IO_BASE+0x7C000)
-#define OMAP24XX_GPT6 (OMAP24XX_L4_IO_BASE+0x7E000)
-#define OMAP24XX_GPT7 (OMAP24XX_L4_IO_BASE+0x80000)
-#define OMAP24XX_GPT8 (OMAP24XX_L4_IO_BASE+0x82000)
-#define OMAP24XX_GPT9 (OMAP24XX_L4_IO_BASE+0x84000)
-#define OMAP24XX_GPT10 (OMAP24XX_L4_IO_BASE+0x86000)
-#define OMAP24XX_GPT11 (OMAP24XX_L4_IO_BASE+0x88000)
-#define OMAP24XX_GPT12 (OMAP24XX_L4_IO_BASE+0x8A000)
-
-#define GPTIMER1_SYSCONFIG GPT1_REG32(0x010)
-#define GPTIMER2_SYSCONFIG __REG32(OMAP24XX_GPT2 + 0x10)
-#define GPTIMER3_SYSCONFIG __REG32(OMAP24XX_GPT3 + 0x10)
-#define GPTIMER4_SYSCONFIG __REG32(OMAP24XX_GPT4 + 0x10)
-#define GPTIMER5_SYSCONFIG __REG32(OMAP24XX_GPT5 + 0x10)
-#define GPTIMER6_SYSCONFIG __REG32(OMAP24XX_GPT6 + 0x10)
-#define GPTIMER7_SYSCONFIG __REG32(OMAP24XX_GPT7 + 0x10)
-#define GPTIMER8_SYSCONFIG __REG32(OMAP24XX_GPT8 + 0x10)
-#define GPTIMER9_SYSCONFIG __REG32(OMAP24XX_GPT9 + 0x10)
-#define GPTIMER10_SYSCONFIG __REG32(OMAP24XX_GPT10 + 0x10)
-#define GPTIMER11_SYSCONFIG __REG32(OMAP24XX_GPT11 + 0x10)
-#define GPTIMER12_SYSCONFIG __REG32(OMAP24XX_GPT12 + 0x10)
-
-#define GPIOX_BASE(X) (OMAP24XX_GPIO_BASE+(0x2000*((X)-1)))
-
-#define GPIO1_SYSCONFIG __REG32((GPIOX_BASE(1)+0x10))
-#define GPIO2_SYSCONFIG __REG32((GPIOX_BASE(2)+0x10))
-#define GPIO3_SYSCONFIG __REG32((GPIOX_BASE(3)+0x10))
-#define GPIO4_SYSCONFIG __REG32((GPIOX_BASE(4)+0x10))
-
-/* GP TIMER 1 */
-#define GPTIMER1_TISTAT GPT1_REG32(0x014)
-#define GPTIMER1_TISR GPT1_REG32(0x018)
-#define GPTIMER1_TIER GPT1_REG32(0x01C)
-#define GPTIMER1_TWER GPT1_REG32(0x020)
-#define GPTIMER1_TCLR GPT1_REG32(0x024)
-#define GPTIMER1_TCRR GPT1_REG32(0x028)
-#define GPTIMER1_TLDR GPT1_REG32(0x02C)
-#define GPTIMER1_TTGR GPT1_REG32(0x030)
-#define GPTIMER1_TWPS GPT1_REG32(0x034)
-#define GPTIMER1_TMAR GPT1_REG32(0x038)
-#define GPTIMER1_TCAR1 GPT1_REG32(0x03C)
-#define GPTIMER1_TSICR GPT1_REG32(0x040)
-#define GPTIMER1_TCAR2 GPT1_REG32(0x044)
-
-/* rkw -- base fix up please... */
-#define GPTIMER3_TISR __REG32(OMAP24XX_L4_IO_BASE+0x78018)
-
-/* SDRC */
-#define SDRC_DLLA_CTRL __REG32(OMAP24XX_SDRC_BASE+0x060)
-#define SDRC_DLLA_STATUS __REG32(OMAP24XX_SDRC_BASE+0x064)
-#define SDRC_DLLB_CTRL __REG32(OMAP24XX_SDRC_BASE+0x068)
-#define SDRC_DLLB_STATUS __REG32(OMAP24XX_SDRC_BASE+0x06C)
-#define SDRC_POWER __REG32(OMAP24XX_SDRC_BASE+0x070)
-#define SDRC_MR_0 __REG32(OMAP24XX_SDRC_BASE+0x084)
-
-/* GPIO 1 */
-#define GPIO1_BASE GPIOX_BASE(1)
-#define GPIO1_REG32(offset) __REG32(GPIO1_BASE + (offset))
-#define GPIO1_IRQENABLE1 GPIO1_REG32(0x01C)
-#define GPIO1_IRQSTATUS1 GPIO1_REG32(0x018)
-#define GPIO1_IRQENABLE2 GPIO1_REG32(0x02C)
-#define GPIO1_IRQSTATUS2 GPIO1_REG32(0x028)
-#define GPIO1_WAKEUPENABLE GPIO1_REG32(0x020)
-#define GPIO1_RISINGDETECT GPIO1_REG32(0x048)
-#define GPIO1_DATAIN GPIO1_REG32(0x038)
-#define GPIO1_OE GPIO1_REG32(0x034)
-#define GPIO1_DATAOUT GPIO1_REG32(0x03C)
-
-/* GPIO2 */
-#define GPIO2_BASE GPIOX_BASE(2)
-#define GPIO2_REG32(offset) __REG32(GPIO2_BASE + (offset))
-#define GPIO2_IRQENABLE1 GPIO2_REG32(0x01C)
-#define GPIO2_IRQSTATUS1 GPIO2_REG32(0x018)
-#define GPIO2_IRQENABLE2 GPIO2_REG32(0x02C)
-#define GPIO2_IRQSTATUS2 GPIO2_REG32(0x028)
-#define GPIO2_WAKEUPENABLE GPIO2_REG32(0x020)
-#define GPIO2_RISINGDETECT GPIO2_REG32(0x048)
-#define GPIO2_DATAIN GPIO2_REG32(0x038)
-#define GPIO2_OE GPIO2_REG32(0x034)
-#define GPIO2_DATAOUT GPIO2_REG32(0x03C)
-
-/* GPIO 3 */
-#define GPIO3_BASE GPIOX_BASE(3)
-#define GPIO3_REG32(offset) __REG32(GPIO3_BASE + (offset))
-#define GPIO3_IRQENABLE1 GPIO3_REG32(0x01C)
-#define GPIO3_IRQSTATUS1 GPIO3_REG32(0x018)
-#define GPIO3_IRQENABLE2 GPIO3_REG32(0x02C)
-#define GPIO3_IRQSTATUS2 GPIO3_REG32(0x028)
-#define GPIO3_WAKEUPENABLE GPIO3_REG32(0x020)
-#define GPIO3_RISINGDETECT GPIO3_REG32(0x048)
-#define GPIO3_FALLINGDETECT GPIO3_REG32(0x04C)
-#define GPIO3_DATAIN GPIO3_REG32(0x038)
-#define GPIO3_OE GPIO3_REG32(0x034)
-#define GPIO3_DATAOUT GPIO3_REG32(0x03C)
-#define GPIO3_DEBOUNCENABLE GPIO3_REG32(0x050)
-#define GPIO3_DEBOUNCINGTIME GPIO3_REG32(0x054)
-
-/* GPIO 4 */
-#define GPIO4_BASE GPIOX_BASE(4)
-#define GPIO4_REG32(offset) __REG32(GPIO4_BASE + (offset))
-#define GPIO4_IRQENABLE1 GPIO4_REG32(0x01C)
-#define GPIO4_IRQSTATUS1 GPIO4_REG32(0x018)
-#define GPIO4_IRQENABLE2 GPIO4_REG32(0x02C)
-#define GPIO4_IRQSTATUS2 GPIO4_REG32(0x028)
-#define GPIO4_WAKEUPENABLE GPIO4_REG32(0x020)
-#define GPIO4_RISINGDETECT GPIO4_REG32(0x048)
-#define GPIO4_FALLINGDETECT GPIO4_REG32(0x04C)
-#define GPIO4_DATAIN GPIO4_REG32(0x038)
-#define GPIO4_OE GPIO4_REG32(0x034)
-#define GPIO4_DATAOUT GPIO4_REG32(0x03C)
-#define GPIO4_DEBOUNCENABLE GPIO4_REG32(0x050)
-#define GPIO4_DEBOUNCINGTIME GPIO4_REG32(0x054)
-
-
-/* IO CONFIG */
-#define CONTROL_BASE (OMAP24XX_CTRL_BASE)
-#define CONTROL_REG32(offset) __REG32(CONTROL_BASE + (offset))
-
-#define CONTROL_PADCONF_SPI1_NCS2 CONTROL_REG32(0x104)
-#define CONTROL_PADCONF_SYS_XTALOUT CONTROL_REG32(0x134)
-#define CONTROL_PADCONF_UART1_RX CONTROL_REG32(0x0C8)
-#define CONTROL_PADCONF_MCBSP1_DX CONTROL_REG32(0x10C)
-#define CONTROL_PADCONF_GPMC_NCS4 CONTROL_REG32(0x090)
-#define CONTROL_PADCONF_DSS_D5 CONTROL_REG32(0x0B8)
-#define CONTROL_PADCONF_DSS_D9 CONTROL_REG32(0x0BC)
-#define CONTROL_PADCONF_DSS_D13 CONTROL_REG32(0x0C0)
-#define CONTROL_PADCONF_DSS_VSYNC CONTROL_REG32(0x0CC)
-
-/* CONTROL */
-#define CONTROL_DEVCONF CONTROL_REG32(0x274)
-
-/* INTERRUPT CONTROLLER */
-#define INTC_BASE (OMAP24XX_L4_IO_BASE+0xfe000)
-#define INTC_REG32(offset) __REG32(INTC_BASE + (offset))
-
-#define INTC1_U_BASE INTC_REG32(0x000)
-#define INTC_MIR0 INTC_REG32(0x084)
-#define INTC_MIR_SET0 INTC_REG32(0x08C)
-#define INTC_MIR_CLEAR0 INTC_REG32(0x088)
-#define INTC_ISR_CLEAR0 INTC_REG32(0x094)
-#define INTC_MIR1 INTC_REG32(0x0A4)
-#define INTC_MIR_SET1 INTC_REG32(0x0AC)
-#define INTC_MIR_CLEAR1 INTC_REG32(0x0A8)
-#define INTC_ISR_CLEAR1 INTC_REG32(0x0B4)
-#define INTC_MIR2 INTC_REG32(0x0C4)
-#define INTC_MIR_SET2 INTC_REG32(0x0CC)
-#define INTC_MIR_CLEAR2 INTC_REG32(0x0C8)
-#define INTC_ISR_CLEAR2 INTC_REG32(0x0D4)
-#define INTC_SIR_IRQ INTC_REG32(0x040)
-#define INTC_CONTROL INTC_REG32(0x048)
-#define INTC_ILR11 INTC_REG32(0x12C)
-#define INTC_ILR32 INTC_REG32(0x180)
-#define INTC_ILR37 INTC_REG32(0x194)
-#define INTC_SYSCONFIG INTC_REG32(0x010)
-
-/* RAM FIREWALL */
-#define RAMFW_BASE (0x68005000)
-#define RAMFW_REG32(offset) __REG32(RAMFW_BASE + (offset))
-
-#define RAMFW_REQINFOPERM0 RAMFW_REG32(0x048)
-#define RAMFW_READPERM0 RAMFW_REG32(0x050)
-#define RAMFW_WRITEPERM0 RAMFW_REG32(0x058)
-
-/* GPMC CS1 FPGA ON USER INTERFACE MODULE */
-//#define DEBUG_BOARD_LED_REGISTER 0x04000014
-
-/* GPMC CS0 */
-#define GPMC_CONFIG1_0 GPMC_REG32(0x060)
-#define GPMC_CONFIG2_0 GPMC_REG32(0x064)
-#define GPMC_CONFIG3_0 GPMC_REG32(0x068)
-#define GPMC_CONFIG4_0 GPMC_REG32(0x06C)
-#define GPMC_CONFIG5_0 GPMC_REG32(0x070)
-#define GPMC_CONFIG6_0 GPMC_REG32(0x074)
-#define GPMC_CONFIG7_0 GPMC_REG32(0x078)
-
-/* GPMC CS1 */
-#define GPMC_CONFIG1_1 GPMC_REG32(0x090)
-#define GPMC_CONFIG2_1 GPMC_REG32(0x094)
-#define GPMC_CONFIG3_1 GPMC_REG32(0x098)
-#define GPMC_CONFIG4_1 GPMC_REG32(0x09C)
-#define GPMC_CONFIG5_1 GPMC_REG32(0x0a0)
-#define GPMC_CONFIG6_1 GPMC_REG32(0x0a4)
-#define GPMC_CONFIG7_1 GPMC_REG32(0x0a8)
-
-/* DSS */
-#define DSS_CONTROL DISP_REG32(0x040)
-#define DISPC_CONTROL DISP_REG32(0x440)
-#define DISPC_SYSSTATUS DISP_REG32(0x414)
-#define DISPC_IRQSTATUS DISP_REG32(0x418)
-#define DISPC_IRQENABLE DISP_REG32(0x41C)
-#define DISPC_CONFIG DISP_REG32(0x444)
-#define DISPC_DEFAULT_COLOR0 DISP_REG32(0x44C)
-#define DISPC_DEFAULT_COLOR1 DISP_REG32(0x450)
-#define DISPC_TRANS_COLOR0 DISP_REG32(0x454)
-#define DISPC_TRANS_COLOR1 DISP_REG32(0x458)
-#define DISPC_LINE_NUMBER DISP_REG32(0x460)
-#define DISPC_TIMING_H DISP_REG32(0x464)
-#define DISPC_TIMING_V DISP_REG32(0x468)
-#define DISPC_POL_FREQ DISP_REG32(0x46C)
-#define DISPC_DIVISOR DISP_REG32(0x470)
-#define DISPC_SIZE_DIG DISP_REG32(0x478)
-#define DISPC_SIZE_LCD DISP_REG32(0x47C)
-#define DISPC_GFX_BA0 DISP_REG32(0x480)
-#define DISPC_GFX_BA1 DISP_REG32(0x484)
-#define DISPC_GFX_POSITION DISP_REG32(0x488)
-#define DISPC_GFX_SIZE DISP_REG32(0x48C)
-#define DISPC_GFX_ATTRIBUTES DISP_REG32(0x4A0)
-#define DISPC_GFX_FIFO_THRESHOLD DISP_REG32(0x4A4)
-#define DISPC_GFX_ROW_INC DISP_REG32(0x4AC)
-#define DISPC_GFX_PIXEL_INC DISP_REG32(0x4B0)
-#define DISPC_GFX_WINDOW_SKIP DISP_REG32(0x4B4)
-#define DISPC_GFX_TABLE_BA DISP_REG32(0x4B8)
-#define DISPC_DATA_CYCLE1 DISP_REG32(0x5D4)
-#define DISPC_DATA_CYCLE2 DISP_REG32(0x5D8)
-#define DISPC_DATA_CYCLE3 DISP_REG32(0x5DC)
-
-/* Wake up define for board */
-#define GPIO97 (1 << 1)
-#define GPIO88 (1 << 24)
-
-#endif /* __ASSEMBLER__ */
+u32 omap_prcm_get_reset_sources(void);
#endif
diff --git a/include/asm-arm/arch-omap/sram.h b/include/asm-arm/arch-omap/sram.h
index e72ccbf0fe06..6fc0dd57b7c3 100644
--- a/include/asm-arm/arch-omap/sram.h
+++ b/include/asm-arm/arch-omap/sram.h
@@ -20,6 +20,8 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
u32 mem_type);
extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+extern unsigned long omap_fb_sram_start;
+extern unsigned long omap_fb_sram_size;
/* Do not use these */
extern void sram_reprogram_clock(u32 ckctl, u32 dpllctl);
diff --git a/include/asm-arm/arch-omap/system.h b/include/asm-arm/arch-omap/system.h
index 6724a81bd10b..67970d1a2020 100644
--- a/include/asm-arm/arch-omap/system.h
+++ b/include/asm-arm/arch-omap/system.h
@@ -9,12 +9,13 @@
#include <asm/mach-types.h>
#include <asm/hardware.h>
-#include <asm/arch/prcm.h>
#ifndef CONFIG_MACH_VOICEBLUE
#define voiceblue_reset() do {} while (0)
#endif
+extern void omap_prcm_arch_reset(char mode);
+
static inline void arch_idle(void)
{
cpu_do_idle();
@@ -38,24 +39,12 @@ static inline void omap1_arch_reset(char mode)
omap_writew(1, ARM_RSTCT1);
}
-static inline void omap2_arch_reset(char mode)
-{
- u32 rate;
- struct clk *vclk, *sclk;
-
- vclk = clk_get(NULL, "virt_prcm_set");
- sclk = clk_get(NULL, "sys_ck");
- rate = clk_get_rate(sclk);
- clk_set_rate(vclk, rate); /* go to bypass for OMAP limitation */
- RM_RSTCTRL_WKUP |= 2;
-}
-
static inline void arch_reset(char mode)
{
if (!cpu_is_omap24xx())
omap1_arch_reset(mode);
else
- omap2_arch_reset(mode);
+ omap_prcm_arch_reset(mode);
}
#endif
diff --git a/include/asm-arm/arch-omap/uncompress.h b/include/asm-arm/arch-omap/uncompress.h
index c718264affbd..ca2c8bec82e7 100644
--- a/include/asm-arm/arch-omap/uncompress.h
+++ b/include/asm-arm/arch-omap/uncompress.h
@@ -30,8 +30,7 @@ unsigned int system_rev;
#define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0)
#define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK
-static void
-putstr(const char *s)
+static void putc(int c)
{
volatile u8 * uart = 0;
int shift = 2;
@@ -69,16 +68,13 @@ putstr(const char *s)
/*
* Now, xmit each character
*/
- while (*s) {
- while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
- barrier();
- uart[UART_TX << shift] = *s;
- if (*s++ == '\n') {
- while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
- barrier();
- uart[UART_TX << shift] = '\r';
- }
- }
+ while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
+ barrier();
+ uart[UART_TX << shift] = c;
+}
+
+static inline void flush(void)
+{
}
/*
OpenPOWER on IntegriCloud