22 files changed, 12 insertions, 35 deletions
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 1a3dbd1b196e..a440958d34e4 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1524,7 +1524,7 @@ static void ata_qc_complete_internal(struct ata_queued_cmd *qc)
  *	@dev: Device to which the command is sent
  *	@tf: Taskfile registers for the command and the result
  *	@cdb: CDB for packet command
- *	@dma_dir: Data tranfer direction of the command
+ *	@dma_dir: Data transfer direction of the command
  *	@sgl: sg list for the data buffer of the command
  *	@n_elem: Number of sg entries
  *	@timeout: Timeout in msecs (0 for default)
@@ -1712,7 +1712,7 @@ unsigned ata_exec_internal_sg(struct ata_device *dev,
  *	@dev: Device to which the command is sent
  *	@tf: Taskfile registers for the command and the result
  *	@cdb: CDB for packet command
- *	@dma_dir: Data tranfer direction of the command
+ *	@dma_dir: Data transfer direction of the command
  *	@buf: Data buffer of the command
  *	@buflen: Length of data buffer
  *	@timeout: Timeout in msecs (0 for default)
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 59dc8086e4fa..83e910a57563 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -1218,7 +1218,7 @@ err_dev:
  * with the name of the subsystem. The root device can carry subsystem-
  * wide attributes. All registered devices are below this single root
  * device and are named after the subsystem with a simple enumeration
- * number appended. The registered devices are not explicitely named;
+ * number appended. The registered devices are not explicitly named;
  * only 'id' in the device needs to be set.
  *
  * Do not use this interface for anything new, it exists for compatibility
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index ea92b827e787..f7a81209beb3 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -564,7 +564,7 @@ drm_crtc_helper_disable(struct drm_crtc *crtc)
  * Caller must hold mode config lock.
  *
  * Setup a new configuration, provided by the upper layers (either an ioctl call
- * from userspace or internally e.g. from the fbdev suppport code) in @set, and
+ * from userspace or internally e.g. from the fbdev support code) in @set, and
  * enable it. This is the main helper functions for drivers that implement
  * kernel mode setting with the crtc helper functions and the assorted
  * ->prepare(), ->modeset() and ->commit() helper callbacks.
diff --git a/drivers/input/sparse-keymap.c b/drivers/input/sparse-keymap.c
index a70aa555bbff..e7409c45bdd0 100644
--- a/drivers/input/sparse-keymap.c
+++ b/drivers/input/sparse-keymap.c
@@ -236,7 +236,7 @@ EXPORT_SYMBOL(sparse_keymap_setup);
  * in an input device that was set up by sparse_keymap_setup().
  * NOTE: It is safe to cal this function while input device is
  * still registered (however the drivers should care not to try to
- * use freed keymap and thus have to shut off interrups/polling
+ * use freed keymap and thus have to shut off interrupts/polling
  * before freeing the keymap).
  */
 void sparse_keymap_free(struct input_dev *dev)
diff --git a/drivers/misc/mic/Kconfig b/drivers/misc/mic/Kconfig
index e42b331edbc6..462a5b1d8651 100644
--- a/drivers/misc/mic/Kconfig
+++ b/drivers/misc/mic/Kconfig
@@ -4,7 +4,6 @@ config INTEL_MIC_HOST
 	tristate "Intel MIC Host Driver"
 	depends on 64BIT && PCI && X86
 	select VHOST_RING
-	default N
 	help
 	  This enables Host Driver support for the Intel Many Integrated
 	  Core (MIC) family of PCIe form factor coprocessor devices that
@@ -25,7 +24,6 @@ config INTEL_MIC_CARD
 	tristate "Intel MIC Card Driver"
 	depends on 64BIT && X86
 	select VIRTIO
-	default N
 	help
 	  This enables card driver support for the Intel Many Integrated
 	  Core (MIC) device family. The card driver communicates shutdown/
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
index f58db453a97e..08726177a3eb 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
@@ -585,7 +585,7 @@ static int ixgbe_fcoe_dma_pool_alloc(struct ixgbe_fcoe *fcoe,
 	struct dma_pool *pool;
 	char pool_name[32];
 
-	snprintf(pool_name, 32, "ixgbe_fcoe_ddp_%d", cpu);
+	snprintf(pool_name, 32, "ixgbe_fcoe_ddp_%u", cpu);
 
 	pool = dma_pool_create(pool_name, dev, IXGBE_FCPTR_MAX,
 			       IXGBE_FCPTR_ALIGN, PAGE_SIZE);
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 16a309e5c024..8bd5cbf3aafb 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2141,7 +2141,7 @@ EXPORT_SYMBOL_GPL(regulator_is_enabled);
  * @regulator: regulator source
  *
  * Returns positive if the regulator driver backing the source/client
- * can change its voltage, false otherwise. Usefull for detecting fixed
+ * can change its voltage, false otherwise. Useful for detecting fixed
  * or dummy regulators and disabling voltage change logic in the client
  * driver.
  */
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index fd8ffe6bcfdd..0102a2d70dd8 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -1225,7 +1225,7 @@ struct bus_type iscsi_flashnode_bus = {
  * Adds a sysfs entry for the flashnode session attributes
  *
  * Returns:
- *  pointer to allocated flashnode sess on sucess
+ *  pointer to allocated flashnode sess on success
  *  %NULL on failure
  */
 struct iscsi_bus_flash_session *
@@ -1423,7 +1423,7 @@ static int iscsi_iter_destroy_flashnode_conn_fn(struct device *dev, void *data)
 }
 
 /**
- * iscsi_destroy_flashnode_sess - destory flashnode session entry
+ * iscsi_destroy_flashnode_sess - destroy flashnode session entry
  * @fnode_sess: pointer to flashnode session entry to be destroyed
  *
  * Deletes the flashnode session entry and all children flashnode connection
@@ -1453,7 +1453,7 @@ static int iscsi_iter_destroy_flashnode_fn(struct device *dev, void *data)
 }
 
 /**
- * iscsi_destroy_all_flashnode - destory all flashnode session entries
+ * iscsi_destroy_all_flashnode - destroy all flashnode session entries
  * @shost: pointer to host data
  *
  * Destroys all the flashnode session entries and all corresponding children
diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig
index b91c758883bf..b6b869261f32 100644
--- a/drivers/staging/android/Kconfig
+++ b/drivers/staging/android/Kconfig
@@ -2,7 +2,6 @@ menu "Android"
 
 config ANDROID
 	bool "Android Drivers"
-	default N
 	---help---
 	  Enable support for various drivers needed on the Android platform
 
@@ -60,7 +59,6 @@ config ANDROID_TIMED_GPIO
 
 config ANDROID_LOW_MEMORY_KILLER
 	bool "Android Low Memory Killer"
-	default N
 	---help---
 	  Registers processes to be killed when memory is low
 
diff --git a/drivers/staging/bcm/Kconfig b/drivers/staging/bcm/Kconfig
index 83c9752504d4..8acf4b24a7c9 100644
--- a/drivers/staging/bcm/Kconfig
+++ b/drivers/staging/bcm/Kconfig
@@ -1,7 +1,6 @@
 config BCM_WIMAX
        tristate "Beceem BCS200/BCS220-3 and BCSM250 wimax support"
        depends on USB && NET
-       default N
        help
          This is an experimental driver for the Beceem WIMAX chipset used
 	 by Sprint 4G.
diff --git a/drivers/staging/frontier/Kconfig b/drivers/staging/frontier/Kconfig
index 7121853bd397..4da290b2f5bd 100644
--- a/drivers/staging/frontier/Kconfig
+++ b/drivers/staging/frontier/Kconfig
@@ -1,6 +1,5 @@
 config TRANZPORT
 	tristate "Frontier Tranzport and Alphatrack support"
 	depends on USB
-	default N
 	---help---
 	  Enable support for the Frontier Tranzport and Alphatrack devices.
diff --git a/drivers/staging/media/go7007/Kconfig b/drivers/staging/media/go7007/Kconfig
index 04bd0fba7b1f..95a3af644a92 100644
--- a/drivers/staging/media/go7007/Kconfig
+++ b/drivers/staging/media/go7007/Kconfig
@@ -13,7 +13,6 @@ config VIDEO_GO7007
 	select VIDEO_TW9906 if MEDIA_SUBDRV_AUTOSELECT
 	select VIDEO_OV7640 if MEDIA_SUBDRV_AUTOSELECT
 	select VIDEO_UDA1342 if MEDIA_SUBDRV_AUTOSELECT
-	default N
 	---help---
 	  This is a video4linux driver for the WIS GO7007 MPEG
 	  encoder chip.
@@ -24,7 +23,6 @@ config VIDEO_GO7007
 config VIDEO_GO7007_USB
 	tristate "WIS GO7007 USB support"
 	depends on VIDEO_GO7007 && USB
-	default N
 	---help---
 	  This is a video4linux driver for the WIS GO7007 MPEG
 	  encoder chip over USB.
@@ -46,7 +44,6 @@ config VIDEO_GO7007_LOADER
 config VIDEO_GO7007_USB_S2250_BOARD
 	tristate "Sensoray 2250/2251 support"
 	depends on VIDEO_GO7007_USB && USB
-	default N
 	---help---
 	  This is a video4linux driver for the Sensoray 2250/2251 device.
 
diff --git a/drivers/staging/rtl8187se/Kconfig b/drivers/staging/rtl8187se/Kconfig
index 3162aabbeb07..ff8d41ebca36 100644
--- a/drivers/staging/rtl8187se/Kconfig
+++ b/drivers/staging/rtl8187se/Kconfig
@@ -6,6 +6,5 @@ config R8187SE
 	select WEXT_PRIV
 	select EEPROM_93CX6
 	select CRYPTO
-	default N
 	---help---
 	  If built as a module, it will be called r8187se.ko.
diff --git a/drivers/staging/rtl8188eu/Kconfig b/drivers/staging/rtl8188eu/Kconfig
index c9c548f17494..70fecfabc0c7 100644
--- a/drivers/staging/rtl8188eu/Kconfig
+++ b/drivers/staging/rtl8188eu/Kconfig
@@ -3,7 +3,6 @@ config R8188EU
 	depends on WLAN && USB
 	select WIRELESS_EXT
 	select WEXT_PRIV
-	default N
 	---help---
 	This option adds the Realtek RTL8188EU USB device such as TP-Link TL-WN725N.
 	If built as a module, it will be called r8188eu.
diff --git a/drivers/staging/rtl8192e/rtl8192e/Kconfig b/drivers/staging/rtl8192e/rtl8192e/Kconfig
index 50e0d91a409a..ad82bc348a75 100644
--- a/drivers/staging/rtl8192e/rtl8192e/Kconfig
+++ b/drivers/staging/rtl8192e/rtl8192e/Kconfig
@@ -5,5 +5,4 @@ config RTL8192E
 	select WIRELESS_EXT
 	select WEXT_PRIV
 	select CRYPTO
-	default N
 	---help---
diff --git a/drivers/staging/rtl8192u/Kconfig b/drivers/staging/rtl8192u/Kconfig
index 3f055091b35f..3ee9d0d00fb6 100644
--- a/drivers/staging/rtl8192u/Kconfig
+++ b/drivers/staging/rtl8192u/Kconfig
@@ -5,5 +5,4 @@ config RTL8192U
 	select WIRELESS_EXT
 	select WEXT_PRIV
 	select CRYPTO
-	default N
 	---help---
diff --git a/drivers/staging/rtl8712/Kconfig b/drivers/staging/rtl8712/Kconfig
index 6a43312380e0..f160eee52f09 100644
--- a/drivers/staging/rtl8712/Kconfig
+++ b/drivers/staging/rtl8712/Kconfig
@@ -4,7 +4,6 @@ config R8712U
 	select WIRELESS_EXT
 	select WEXT_PRIV
 	select FW_LOADER
-	default N
 	---help---
 	This option adds the Realtek RTL8712 USB device such as the D-Link DWA-130.
 	If built as a module, it will be called r8712u.
@@ -12,7 +11,6 @@ config R8712U
 config R8712_TX_AGGR
 	bool "Realtek RTL8712U Transmit Aggregation code"
 	depends on R8712U && BROKEN
-	default N
 	---help---
 	This option provides transmit aggregation for the Realtek RTL8712 USB device.
 
diff --git a/drivers/staging/usbip/Kconfig b/drivers/staging/usbip/Kconfig
index 886000980474..bd99e9e47e50 100644
--- a/drivers/staging/usbip/Kconfig
+++ b/drivers/staging/usbip/Kconfig
@@ -1,7 +1,6 @@
 config USBIP_CORE
 	tristate "USB/IP support"
 	depends on USB && NET
-	default N
 	---help---
 	  This enables pushing USB packets over IP to allow remote
 	  machines direct access to USB devices. It provides the
@@ -18,7 +17,6 @@ config USBIP_CORE
 config USBIP_VHCI_HCD
 	tristate "VHCI hcd"
 	depends on USBIP_CORE
-	default N
 	---help---
 	  This enables the USB/IP virtual host controller driver,
 	  which is run on the remote machine.
@@ -29,7 +27,6 @@ config USBIP_VHCI_HCD
 config USBIP_HOST
 	tristate "Host driver"
 	depends on USBIP_CORE
-	default N
 	---help---
 	  This enables the USB/IP host driver, which is run on the
 	  machine that is sharing the USB devices.
@@ -40,6 +37,5 @@ config USBIP_HOST
 config USBIP_DEBUG
 	bool "Debug messages for USB/IP"
 	depends on USBIP_CORE
-	default N
 	---help---
 	  This enables the debug messages from the USB/IP drivers.
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index fed7f68d025d..cb8e99156f5a 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -10,7 +10,6 @@ config USB_DEBUG
 
 config USB_ANNOUNCE_NEW_DEVICES
 	bool "USB announce new devices"
-	default N
 	help
 	  Say Y here if you want the USB core to always announce the
 	  idVendor, idProduct, Manufacturer, Product, and SerialNumber
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index f829a1aad1c3..5239e5163074 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -178,7 +178,7 @@ EXPORT_SYMBOL_GPL(usb_control_msg);
  *
  * Return:
  * If successful, 0. Otherwise a negative error number. The number of actual
- * bytes transferred will be stored in the @actual_length paramater.
+ * bytes transferred will be stored in the @actual_length parameter.
  */
 int usb_interrupt_msg(struct usb_device *usb_dev, unsigned int pipe,
 		      void *data, int len, int *actual_length, int timeout)
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 9ff665f1322f..991386ceb4ec 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -831,7 +831,7 @@ EXPORT_SYMBOL_GPL(usb_unpoison_anchored_urbs);
  *
  * this allows all outstanding URBs to be unlinked starting
  * from the back of the queue. This function is asynchronous.
- * The unlinking is just tiggered. It may happen after this
+ * The unlinking is just triggered. It may happen after this
  * function has returned.
  *
  * This routine should not be called by a driver after its disconnect
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index a9707da7da0b..c8b4161613cf 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -314,7 +314,6 @@ config USB_ISP1760_HCD
 
 config USB_ISP1362_HCD
 	tristate "ISP1362 HCD support"
-	default N
 	---help---
 	  Supports the Philips ISP1362 chip as a host controller
 
@@ -326,7 +325,6 @@ config USB_ISP1362_HCD
 config USB_FUSBH200_HCD
 	tristate "FUSBH200 HCD support"
 	depends on USB
-	default N
 	---help---
 	Faraday FUSBH200 is designed to meet USB2.0 EHCI specification
 	with minor modification.
@@ -337,7 +335,6 @@ config USB_FUSBH200_HCD
 config USB_FOTG210_HCD
 	tristate "FOTG210 HCD support"
 	depends on USB
-	default N
 	---help---
 	  Faraday FOTG210 is an OTG controller which can be configured as
 	  an USB2.0 host. It is designed to meet USB2.0 EHCI specification