diff options
Diffstat (limited to 'drivers/regulator/pfuze100-regulator.c')
-rw-r--r-- | drivers/regulator/pfuze100-regulator.c | 134 |
1 files changed, 125 insertions, 9 deletions
diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index c879dff597ee..8cc8d1877c44 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -56,7 +56,7 @@ #define PFUZE100_VGEN5VOL 0x70 #define PFUZE100_VGEN6VOL 0x71 -enum chips { PFUZE100, PFUZE200 }; +enum chips { PFUZE100, PFUZE200, PFUZE3000 = 3 }; struct pfuze_regulator { struct regulator_desc desc; @@ -80,9 +80,18 @@ static const int pfuze100_vsnvs[] = { 1000000, 1100000, 1200000, 1300000, 1500000, 1800000, 3000000, }; +static const int pfuze3000_sw2lo[] = { + 1500000, 1550000, 1600000, 1650000, 1700000, 1750000, 1800000, 1850000, +}; + +static const int pfuze3000_sw2hi[] = { + 2500000, 2800000, 2850000, 3000000, 3100000, 3150000, 3200000, 3300000, +}; + static const struct i2c_device_id pfuze_device_id[] = { {.name = "pfuze100", .driver_data = PFUZE100}, {.name = "pfuze200", .driver_data = PFUZE200}, + {.name = "pfuze3000", .driver_data = PFUZE3000}, { } }; MODULE_DEVICE_TABLE(i2c, pfuze_device_id); @@ -90,6 +99,7 @@ MODULE_DEVICE_TABLE(i2c, pfuze_device_id); static const struct of_device_id pfuze_dt_ids[] = { { .compatible = "fsl,pfuze100", .data = (void *)PFUZE100}, { .compatible = "fsl,pfuze200", .data = (void *)PFUZE200}, + { .compatible = "fsl,pfuze3000", .data = (void *)PFUZE3000}, { } }; MODULE_DEVICE_TABLE(of, pfuze_dt_ids); @@ -219,6 +229,60 @@ static struct regulator_ops pfuze100_swb_regulator_ops = { .stby_mask = 0x20, \ } +#define PFUZE3000_VCC_REG(_chip, _name, base, min, max, step) { \ + .desc = { \ + .name = #_name, \ + .n_voltages = ((max) - (min)) / (step) + 1, \ + .ops = &pfuze100_ldo_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = _chip ## _ ## _name, \ + .owner = THIS_MODULE, \ + .min_uV = (min), \ + .uV_step = (step), \ + .vsel_reg = (base), \ + .vsel_mask = 0x3, \ + .enable_reg = (base), \ + .enable_mask = 0x10, \ + }, \ + .stby_reg = (base), \ + .stby_mask = 0x20, \ +} + + +#define PFUZE3000_SW2_REG(_chip, _name, base, min, max, step) { \ + .desc = { \ + .name = #_name,\ + .n_voltages = ((max) - (min)) / (step) + 1, \ + .ops = &pfuze100_sw_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = _chip ## _ ## _name, \ + .owner = THIS_MODULE, \ + .min_uV = (min), \ + .uV_step = (step), \ + .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ + .vsel_mask = 0x7, \ + }, \ + .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \ + .stby_mask = 0x7, \ +} + +#define PFUZE3000_SW3_REG(_chip, _name, base, min, max, step) { \ + .desc = { \ + .name = #_name,\ + .n_voltages = ((max) - (min)) / (step) + 1, \ + .ops = &pfuze100_sw_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = _chip ## _ ## _name, \ + .owner = THIS_MODULE, \ + .min_uV = (min), \ + .uV_step = (step), \ + .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ + .vsel_mask = 0xf, \ + }, \ + .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \ + .stby_mask = 0xf, \ +} + /* PFUZE100 */ static struct pfuze_regulator pfuze100_regulators[] = { PFUZE100_SW_REG(PFUZE100, SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000), @@ -254,6 +318,22 @@ static struct pfuze_regulator pfuze200_regulators[] = { PFUZE100_VGEN_REG(PFUZE200, VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000), }; +static struct pfuze_regulator pfuze3000_regulators[] = { + PFUZE100_SW_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 700000, 1475000, 25000), + PFUZE100_SW_REG(PFUZE3000, SW1B, PFUZE100_SW1CVOL, 700000, 1475000, 25000), + PFUZE100_SWB_REG(PFUZE3000, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo), + PFUZE3000_SW3_REG(PFUZE3000, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000), + PFUZE100_SWB_REG(PFUZE3000, SWBST, PFUZE100_SWBSTCON1, 0x3, pfuze100_swbst), + PFUZE100_SWB_REG(PFUZE3000, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), + PFUZE100_FIXED_REG(PFUZE3000, VREFDDR, PFUZE100_VREFDDRCON, 750000), + PFUZE100_VGEN_REG(PFUZE3000, VLDO1, PFUZE100_VGEN1VOL, 1800000, 3300000, 100000), + PFUZE100_VGEN_REG(PFUZE3000, VLDO2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000), + PFUZE3000_VCC_REG(PFUZE3000, VCCSD, PFUZE100_VGEN3VOL, 2850000, 3300000, 150000), + PFUZE3000_VCC_REG(PFUZE3000, V33, PFUZE100_VGEN4VOL, 2850000, 3300000, 150000), + PFUZE100_VGEN_REG(PFUZE3000, VLDO3, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000), + PFUZE100_VGEN_REG(PFUZE3000, VLDO4, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000), +}; + static struct pfuze_regulator *pfuze_regulators; #ifdef CONFIG_OF @@ -294,6 +374,24 @@ static struct of_regulator_match pfuze200_matches[] = { { .name = "vgen6", }, }; +/* PFUZE3000 */ +static struct of_regulator_match pfuze3000_matches[] = { + + { .name = "sw1a", }, + { .name = "sw1b", }, + { .name = "sw2", }, + { .name = "sw3", }, + { .name = "swbst", }, + { .name = "vsnvs", }, + { .name = "vrefddr", }, + { .name = "vldo1", }, + { .name = "vldo2", }, + { .name = "vccsd", }, + { .name = "v33", }, + { .name = "vldo3", }, + { .name = "vldo4", }, +}; + static struct of_regulator_match *pfuze_matches; static int pfuze_parse_regulators_dt(struct pfuze_chip *chip) @@ -313,6 +411,11 @@ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip) } switch (chip->chip_id) { + case PFUZE3000: + pfuze_matches = pfuze3000_matches; + ret = of_regulator_match(dev, parent, pfuze3000_matches, + ARRAY_SIZE(pfuze3000_matches)); + break; case PFUZE200: pfuze_matches = pfuze200_matches; ret = of_regulator_match(dev, parent, pfuze200_matches, @@ -378,7 +481,8 @@ static int pfuze_identify(struct pfuze_chip *pfuze_chip) * as ID=8 in PFUZE100 */ dev_info(pfuze_chip->dev, "Assuming misprogrammed ID=0x8"); - } else if ((value & 0x0f) != pfuze_chip->chip_id) { + } else if ((value & 0x0f) != pfuze_chip->chip_id && + (value & 0xf0) >> 4 != pfuze_chip->chip_id) { /* device id NOT match with your setting */ dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value); return -ENODEV; @@ -417,7 +521,7 @@ static int pfuze100_regulator_probe(struct i2c_client *client, int i, ret; const struct of_device_id *match; u32 regulator_num; - u32 sw_check_start, sw_check_end; + u32 sw_check_start, sw_check_end, sw_hi = 0x40; pfuze_chip = devm_kzalloc(&client->dev, sizeof(*pfuze_chip), GFP_KERNEL); @@ -458,13 +562,19 @@ static int pfuze100_regulator_probe(struct i2c_client *client, /* use the right regulators after identify the right device */ switch (pfuze_chip->chip_id) { + case PFUZE3000: + pfuze_regulators = pfuze3000_regulators; + regulator_num = ARRAY_SIZE(pfuze3000_regulators); + sw_check_start = PFUZE3000_SW2; + sw_check_end = PFUZE3000_SW2; + sw_hi = 1 << 3; + break; case PFUZE200: pfuze_regulators = pfuze200_regulators; regulator_num = ARRAY_SIZE(pfuze200_regulators); sw_check_start = PFUZE200_SW2; sw_check_end = PFUZE200_SW3B; break; - case PFUZE100: default: pfuze_regulators = pfuze100_regulators; @@ -474,7 +584,8 @@ static int pfuze100_regulator_probe(struct i2c_client *client, break; } dev_info(&client->dev, "pfuze%s found.\n", - (pfuze_chip->chip_id == PFUZE100) ? "100" : "200"); + (pfuze_chip->chip_id == PFUZE100) ? "100" : + ((pfuze_chip->chip_id == PFUZE200) ? "200" : "3000")); memcpy(pfuze_chip->regulator_descs, pfuze_regulators, sizeof(pfuze_chip->regulator_descs)); @@ -498,10 +609,15 @@ static int pfuze100_regulator_probe(struct i2c_client *client, /* SW2~SW4 high bit check and modify the voltage value table */ if (i >= sw_check_start && i <= sw_check_end) { regmap_read(pfuze_chip->regmap, desc->vsel_reg, &val); - if (val & 0x40) { - desc->min_uV = 800000; - desc->uV_step = 50000; - desc->n_voltages = 51; + if (val & sw_hi) { + if (pfuze_chip->chip_id == PFUZE3000) { + desc->volt_table = pfuze3000_sw2hi; + desc->n_voltages = ARRAY_SIZE(pfuze3000_sw2hi); + } else { + desc->min_uV = 800000; + desc->uV_step = 50000; + desc->n_voltages = 51; + } } } |