diff options
Diffstat (limited to 'drivers/pci')
46 files changed, 2467 insertions, 730 deletions
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index b1ecefa2a23d..7858a117e80b 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -21,17 +21,6 @@ config PCI_MSI If you don't know what to do here, say N. -config PCI_LEGACY - bool "Enable deprecated pci_find_* API" - depends on PCI - default y - help - Say Y here if you want to include support for the deprecated - pci_find_device() API. Most drivers have been converted over - to using the proper hotplug APIs, so this option serves to - include/exclude only a few drivers that are still using this - API. - config PCI_DEBUG bool "PCI Debugging" depends on PCI && DEBUG_KERNEL diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 4df48d58eaa6..3d102dd87c9f 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -2,14 +2,13 @@ # Makefile for the PCI bus specific drivers. # -obj-y += access.o bus.o probe.o remove.o pci.o quirks.o \ +obj-y += access.o bus.o probe.o remove.o pci.o \ pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \ - irq.o + irq.o vpd.o obj-$(CONFIG_PROC_FS) += proc.o obj-$(CONFIG_SYSFS) += slot.o -obj-$(CONFIG_PCI_LEGACY) += legacy.o -CFLAGS_legacy.o += -Wno-deprecated-declarations +obj-$(CONFIG_PCI_QUIRKS) += quirks.o # Build PCI Express stuff if needed obj-$(CONFIG_PCIEPORTBUS) += pcie/ diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c index cef28a79103f..26301cb25e7f 100644 --- a/drivers/pci/bus.c +++ b/drivers/pci/bus.c @@ -17,6 +17,52 @@ #include "pci.h" +void pci_bus_add_resource(struct pci_bus *bus, struct resource *res, + unsigned int flags) +{ + struct pci_bus_resource *bus_res; + + bus_res = kzalloc(sizeof(struct pci_bus_resource), GFP_KERNEL); + if (!bus_res) { + dev_err(&bus->dev, "can't add %pR resource\n", res); + return; + } + + bus_res->res = res; + bus_res->flags = flags; + list_add_tail(&bus_res->list, &bus->resources); +} + +struct resource *pci_bus_resource_n(const struct pci_bus *bus, int n) +{ + struct pci_bus_resource *bus_res; + + if (n < PCI_BRIDGE_RESOURCE_NUM) + return bus->resource[n]; + + n -= PCI_BRIDGE_RESOURCE_NUM; + list_for_each_entry(bus_res, &bus->resources, list) { + if (n-- == 0) + return bus_res->res; + } + return NULL; +} +EXPORT_SYMBOL_GPL(pci_bus_resource_n); + +void pci_bus_remove_resources(struct pci_bus *bus) +{ + struct pci_bus_resource *bus_res, *tmp; + int i; + + for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) + bus->resource[i] = 0; + + list_for_each_entry_safe(bus_res, tmp, &bus->resources, list) { + list_del(&bus_res->list); + kfree(bus_res); + } +} + /** * pci_bus_alloc_resource - allocate a resource from a parent bus * @bus: PCI bus @@ -36,11 +82,14 @@ int pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, resource_size_t size, resource_size_t align, resource_size_t min, unsigned int type_mask, - void (*alignf)(void *, struct resource *, resource_size_t, - resource_size_t), + resource_size_t (*alignf)(void *, + const struct resource *, + resource_size_t, + resource_size_t), void *alignf_data) { int i, ret = -ENOMEM; + struct resource *r; resource_size_t max = -1; type_mask |= IORESOURCE_IO | IORESOURCE_MEM; @@ -49,8 +98,7 @@ pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, if (!(res->flags & IORESOURCE_MEM_64)) max = PCIBIOS_MAX_MEM_32; - for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { - struct resource *r = bus->resource[i]; + pci_bus_for_each_resource(bus, r, i) { if (!r) continue; @@ -240,9 +288,9 @@ void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *), next = dev->bus_list.next; /* Run device routines with the device locked */ - down(&dev->dev.sem); + device_lock(&dev->dev); retval = cb(dev, userdata); - up(&dev->dev.sem); + device_unlock(&dev->dev); if (retval) break; } diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c index 4dd7114964ac..efa9f2de51c1 100644 --- a/drivers/pci/hotplug/acpiphp_core.c +++ b/drivers/pci/hotplug/acpiphp_core.c @@ -332,8 +332,6 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot) slot->hotplug_slot->info->attention_status = 0; slot->hotplug_slot->info->latch_status = acpiphp_get_latch_status(slot->acpi_slot); slot->hotplug_slot->info->adapter_status = acpiphp_get_adapter_status(slot->acpi_slot); - slot->hotplug_slot->info->max_bus_speed = PCI_SPEED_UNKNOWN; - slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN; acpiphp_slot->slot = slot; snprintf(name, SLOT_NAME_SIZE, "%llu", slot->acpi_slot->sun); diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index cb2fd01eddae..b5dad9f37453 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -749,6 +749,24 @@ static int acpiphp_bus_trim(acpi_handle handle) return retval; } +static void acpiphp_set_acpi_region(struct acpiphp_slot *slot) +{ + struct acpiphp_func *func; + union acpi_object params[2]; + struct acpi_object_list arg_list; + + list_for_each_entry(func, &slot->funcs, sibling) { + arg_list.count = 2; + arg_list.pointer = params; + params[0].type = ACPI_TYPE_INTEGER; + params[0].integer.value = ACPI_ADR_SPACE_PCI_CONFIG; + params[1].type = ACPI_TYPE_INTEGER; + params[1].integer.value = 1; + /* _REG is optional, we don't care about if there is failure */ + acpi_evaluate_object(func->handle, "_REG", &arg_list, NULL); + } +} + /** * enable_device - enable, configure a slot * @slot: slot to be enabled @@ -805,6 +823,7 @@ static int __ref enable_device(struct acpiphp_slot *slot) pci_bus_assign_resources(bus); acpiphp_sanitize_bus(bus); acpiphp_set_hpp_values(bus); + acpiphp_set_acpi_region(slot); pci_enable_bridges(bus); pci_bus_add_devices(bus); diff --git a/drivers/pci/hotplug/cpcihp_generic.c b/drivers/pci/hotplug/cpcihp_generic.c index 148fb463b81c..fb3f84661bdc 100644 --- a/drivers/pci/hotplug/cpcihp_generic.c +++ b/drivers/pci/hotplug/cpcihp_generic.c @@ -162,6 +162,7 @@ static int __init cpcihp_generic_init(void) dev = pci_get_slot(bus, PCI_DEVFN(bridge_slot, 0)); if(!dev || dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) { err("Invalid bridge device %s", bridge); + pci_dev_put(dev); return -EINVAL; } bus = dev->subordinate; diff --git a/drivers/pci/hotplug/cpqphp.h b/drivers/pci/hotplug/cpqphp.h index 9c6a9fd26812..d8ffc7366801 100644 --- a/drivers/pci/hotplug/cpqphp.h +++ b/drivers/pci/hotplug/cpqphp.h @@ -310,8 +310,6 @@ struct controller { u8 first_slot; u8 add_support; u8 push_flag; - enum pci_bus_speed speed; - enum pci_bus_speed speed_capability; u8 push_button; /* 0 = no pushbutton, 1 = pushbutton present */ u8 slot_switch_type; /* 0 = no switch, 1 = switch present */ u8 defeature_PHP; /* 0 = PHP not supported, 1 = PHP supported */ diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c index 075b4f4b6e0d..f184d1d2ecbe 100644 --- a/drivers/pci/hotplug/cpqphp_core.c +++ b/drivers/pci/hotplug/cpqphp_core.c @@ -583,30 +583,6 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value) return 0; } -static int get_max_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value) -{ - struct slot *slot = hotplug_slot->private; - struct controller *ctrl = slot->ctrl; - - dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); - - *value = ctrl->speed_capability; - - return 0; -} - -static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value) -{ - struct slot *slot = hotplug_slot->private; - struct controller *ctrl = slot->ctrl; - - dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); - - *value = ctrl->speed; - - return 0; -} - static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = { .set_attention_status = set_attention_status, .enable_slot = process_SI, @@ -616,8 +592,6 @@ static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = { .get_attention_status = get_attention_status, .get_latch_status = get_latch_status, .get_adapter_status = get_adapter_status, - .get_max_bus_speed = get_max_bus_speed, - .get_cur_bus_speed = get_cur_bus_speed, }; #define SLOT_NAME_SIZE 10 @@ -629,6 +603,7 @@ static int ctrl_slot_setup(struct controller *ctrl, struct slot *slot; struct hotplug_slot *hotplug_slot; struct hotplug_slot_info *hotplug_slot_info; + struct pci_bus *bus = ctrl->pci_bus; u8 number_of_slots; u8 slot_device; u8 slot_number; @@ -694,7 +669,7 @@ static int ctrl_slot_setup(struct controller *ctrl, slot->capabilities |= PCISLOT_64_BIT_SUPPORTED; if (is_slot66mhz(slot)) slot->capabilities |= PCISLOT_66_MHZ_SUPPORTED; - if (ctrl->speed == PCI_SPEED_66MHz) + if (bus->cur_bus_speed == PCI_SPEED_66MHz) slot->capabilities |= PCISLOT_66_MHZ_OPERATION; ctrl_slot = @@ -844,6 +819,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) u32 rc; struct controller *ctrl; struct pci_func *func; + struct pci_bus *bus; int err; err = pci_enable_device(pdev); @@ -852,6 +828,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) pci_name(pdev), err); return err; } + bus = pdev->subordinate; /* Need to read VID early b/c it's used to differentiate CPQ and INTC * discovery @@ -929,22 +906,22 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) pci_read_config_byte(pdev, 0x41, &bus_cap); if (bus_cap & 0x80) { dbg("bus max supports 133MHz PCI-X\n"); - ctrl->speed_capability = PCI_SPEED_133MHz_PCIX; + bus->max_bus_speed = PCI_SPEED_133MHz_PCIX; break; } if (bus_cap & 0x40) { dbg("bus max supports 100MHz PCI-X\n"); - ctrl->speed_capability = PCI_SPEED_100MHz_PCIX; + bus->max_bus_speed = PCI_SPEED_100MHz_PCIX; break; } if (bus_cap & 20) { dbg("bus max supports 66MHz PCI-X\n"); - ctrl->speed_capability = PCI_SPEED_66MHz_PCIX; + bus->max_bus_speed = PCI_SPEED_66MHz_PCIX; break; } if (bus_cap & 10) { dbg("bus max supports 66MHz PCI\n"); - ctrl->speed_capability = PCI_SPEED_66MHz; + bus->max_bus_speed = PCI_SPEED_66MHz; break; } @@ -955,7 +932,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) case PCI_SUB_HPC_ID: /* Original 6500/7000 implementation */ ctrl->slot_switch_type = 1; - ctrl->speed_capability = PCI_SPEED_33MHz; + bus->max_bus_speed = PCI_SPEED_33MHz; ctrl->push_button = 0; ctrl->pci_config_space = 1; ctrl->defeature_PHP = 1; @@ -966,7 +943,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* First Pushbutton implementation */ ctrl->push_flag = 1; ctrl->slot_switch_type = 1; - ctrl->speed_capability = PCI_SPEED_33MHz; + bus->max_bus_speed = PCI_SPEED_33MHz; ctrl->push_button = 1; ctrl->pci_config_space = 1; ctrl->defeature_PHP = 1; @@ -976,7 +953,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) case PCI_SUB_HPC_ID_INTC: /* Third party (6500/7000) */ ctrl->slot_switch_type = 1; - ctrl->speed_capability = PCI_SPEED_33MHz; + bus->max_bus_speed = PCI_SPEED_33MHz; ctrl->push_button = 0; ctrl->pci_config_space = 1; ctrl->defeature_PHP = 1; @@ -987,7 +964,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* First 66 Mhz implementation */ ctrl->push_flag = 1; ctrl->slot_switch_type = 1; - ctrl->speed_capability = PCI_SPEED_66MHz; + bus->max_bus_speed = PCI_SPEED_66MHz; ctrl->push_button = 1; ctrl->pci_config_space = 1; ctrl->defeature_PHP = 1; @@ -998,7 +975,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* First PCI-X implementation, 100MHz */ ctrl->push_flag = 1; ctrl->slot_switch_type = 1; - ctrl->speed_capability = PCI_SPEED_100MHz_PCIX; + bus->max_bus_speed = PCI_SPEED_100MHz_PCIX; ctrl->push_button = 1; ctrl->pci_config_space = 1; ctrl->defeature_PHP = 1; @@ -1015,9 +992,9 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) case PCI_VENDOR_ID_INTEL: /* Check for speed capability (0=33, 1=66) */ if (subsystem_deviceid & 0x0001) - ctrl->speed_capability = PCI_SPEED_66MHz; + bus->max_bus_speed = PCI_SPEED_66MHz; else - ctrl->speed_capability = PCI_SPEED_33MHz; + bus->max_bus_speed = PCI_SPEED_33MHz; /* Check for push button */ if (subsystem_deviceid & 0x0002) @@ -1079,7 +1056,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) pdev->bus->number); dbg("Hotplug controller capabilities:\n"); - dbg(" speed_capability %d\n", ctrl->speed_capability); + dbg(" speed_capability %d\n", bus->max_bus_speed); dbg(" slot_switch_type %s\n", ctrl->slot_switch_type ? "switch present" : "no switch"); dbg(" defeature_PHP %s\n", ctrl->defeature_PHP ? @@ -1142,7 +1119,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } /* Check for 66Mhz operation */ - ctrl->speed = get_controller_speed(ctrl); + bus->cur_bus_speed = get_controller_speed(ctrl); /******************************************************** diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c index 0ff689afa757..e43908d9b5df 100644 --- a/drivers/pci/hotplug/cpqphp_ctrl.c +++ b/drivers/pci/hotplug/cpqphp_ctrl.c @@ -1130,12 +1130,13 @@ static int is_bridge(struct pci_func * func) static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_slot) { struct slot *slot; + struct pci_bus *bus = ctrl->pci_bus; u8 reg; u8 slot_power = readb(ctrl->hpc_reg + SLOT_POWER); u16 reg16; u32 leds = readl(ctrl->hpc_reg + LED_CONTROL); - if (ctrl->speed == adapter_speed) + if (bus->cur_bus_speed == adapter_speed) return 0; /* We don't allow freq/mode changes if we find another adapter running @@ -1152,7 +1153,7 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_ * lower speed/mode, we allow the new adapter to function at * this rate if supported */ - if (ctrl->speed < adapter_speed) + if (bus->cur_bus_speed < adapter_speed) return 0; return 1; @@ -1161,20 +1162,20 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_ /* If the controller doesn't support freq/mode changes and the * controller is running at a higher mode, we bail */ - if ((ctrl->speed > adapter_speed) && (!ctrl->pcix_speed_capability)) + if ((bus->cur_bus_speed > adapter_speed) && (!ctrl->pcix_speed_capability)) return 1; /* But we allow the adapter to run at a lower rate if possible */ - if ((ctrl->speed < adapter_speed) && (!ctrl->pcix_speed_capability)) + if ((bus->cur_bus_speed < adapter_speed) && (!ctrl->pcix_speed_capability)) return 0; /* We try to set the max speed supported by both the adapter and * controller */ - if (ctrl->speed_capability < adapter_speed) { - if (ctrl->speed == ctrl->speed_capability) + if (bus->max_bus_speed < adapter_speed) { + if (bus->cur_bus_speed == bus->max_bus_speed) return 0; - adapter_speed = ctrl->speed_capability; + adapter_speed = bus->max_bus_speed; } writel(0x0L, ctrl->hpc_reg + LED_CONTROL); @@ -1229,8 +1230,8 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_ pci_write_config_byte(ctrl->pci_dev, 0x43, reg); /* Only if mode change...*/ - if (((ctrl->speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) || - ((ctrl->speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz))) + if (((bus->cur_bus_speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) || + ((bus->cur_bus_speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz))) set_SOGO(ctrl); wait_for_ctrl_irq(ctrl); @@ -1243,7 +1244,7 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_ set_SOGO(ctrl); wait_for_ctrl_irq(ctrl); - ctrl->speed = adapter_speed; + bus->cur_bus_speed = adapter_speed; slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); info("Successfully changed frequency/mode for adapter in slot %d\n", @@ -1269,6 +1270,7 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_ */ static u32 board_replaced(struct pci_func *func, struct controller *ctrl) { + struct pci_bus *bus = ctrl->pci_bus; u8 hp_slot; u8 temp_byte; u8 adapter_speed; @@ -1309,7 +1311,7 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl) wait_for_ctrl_irq (ctrl); adapter_speed = get_adapter_speed(ctrl, hp_slot); - if (ctrl->speed != adapter_speed) + if (bus->cur_bus_speed != adapter_speed) if (set_controller_speed(ctrl, adapter_speed, hp_slot)) rc = WRONG_BUS_FREQUENCY; @@ -1426,6 +1428,7 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl) u32 temp_register = 0xFFFFFFFF; u32 rc = 0; struct pci_func *new_slot = NULL; + struct pci_bus *bus = ctrl->pci_bus; struct slot *p_slot; struct resource_lists res_lists; @@ -1456,7 +1459,7 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl) wait_for_ctrl_irq (ctrl); adapter_speed = get_adapter_speed(ctrl, hp_slot); - if (ctrl->speed != adapter_speed) + if (bus->cur_bus_speed != adapter_speed) if (set_controller_speed(ctrl, adapter_speed, hp_slot)) rc = WRONG_BUS_FREQUENCY; diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c index 6151389fd903..0a894efd4b9b 100644 --- a/drivers/pci/hotplug/fakephp.c +++ b/drivers/pci/hotplug/fakephp.c @@ -73,7 +73,7 @@ static void legacy_release(struct kobject *kobj) } static struct kobj_type legacy_ktype = { - .sysfs_ops = &(struct sysfs_ops){ + .sysfs_ops = &(const struct sysfs_ops){ .store = legacy_store, .show = legacy_show }, .release = &legacy_release, diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c index 7485ffda950c..d934dd4fa873 100644 --- a/drivers/pci/hotplug/ibmphp_core.c +++ b/drivers/pci/hotplug/ibmphp_core.c @@ -395,89 +395,40 @@ static int get_adapter_present(struct hotplug_slot *hotplug_slot, u8 * value) return rc; } -static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value) +static int get_max_bus_speed(struct slot *slot) { - int rc = -ENODEV; - struct slot *pslot; + int rc; u8 mode = 0; + enum pci_bus_speed speed; + struct pci_bus *bus = slot->hotplug_slot->pci_slot->bus; - debug("%s - Entry hotplug_slot[%p] pvalue[%p]\n", __func__, - hotplug_slot, value); + debug("%s - Entry slot[%p]\n", __func__, slot); ibmphp_lock_operations(); - - if (hotplug_slot) { - pslot = hotplug_slot->private; - if (pslot) { - rc = 0; - mode = pslot->supported_bus_mode; - *value = pslot->supported_speed; - switch (*value) { - case BUS_SPEED_33: - break; - case BUS_SPEED_66: - if (mode == BUS_MODE_PCIX) - *value += 0x01; - break; - case BUS_SPEED_100: - case BUS_SPEED_133: - *value = pslot->supported_speed + 0x01; - break; - default: - /* Note (will need to change): there would be soon 256, 512 also */ - rc = -ENODEV; - } - } - } - + mode = slot->supported_bus_mode; + speed = slot->supported_speed; ibmphp_unlock_operations(); - debug("%s - Exit rc[%d] value[%x]\n", __func__, rc, *value); - return rc; -} -static int get_cur_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value) -{ - int rc = -ENODEV; - struct slot *pslot; - u8 mode = 0; - - debug("%s - Entry hotplug_slot[%p] pvalue[%p]\n", __func__, - hotplug_slot, value); - - ibmphp_lock_operations(); - - if (hotplug_slot) { - pslot = hotplug_slot->private; - if (pslot) { - rc = get_cur_bus_info(&pslot); - if (!rc) { - mode = pslot->bus_on->current_bus_mode; - *value = pslot->bus_on->current_speed; - switch (*value) { - case BUS_SPEED_33: - break; - case BUS_SPEED_66: - if (mode == BUS_MODE_PCIX) - *value += 0x01; - else if (mode == BUS_MODE_PCI) - ; - else - *value = PCI_SPEED_UNKNOWN; - break; - case BUS_SPEED_100: - case BUS_SPEED_133: - *value += 0x01; - break; - default: - /* Note of change: there would also be 256, 512 soon */ - rc = -ENODEV; - } - } - } + switch (speed) { + case BUS_SPEED_33: + break; + case BUS_SPEED_66: + if (mode == BUS_MODE_PCIX) + speed += 0x01; + break; + case BUS_SPEED_100: + case BUS_SPEED_133: + speed += 0x01; + break; + default: + /* Note (will need to change): there would be soon 256, 512 also */ + rc = -ENODEV; } - ibmphp_unlock_operations(); - debug("%s - Exit rc[%d] value[%x]\n", __func__, rc, *value); + if (!rc) + bus->max_bus_speed = speed; + + debug("%s - Exit rc[%d] speed[%x]\n", __func__, rc, speed); return rc; } @@ -572,6 +523,7 @@ static int __init init_ops(void) if (slot_cur->bus_on->current_speed == 0xFF) if (get_cur_bus_info(&slot_cur)) return -1; + get_max_bus_speed(slot_cur); if (slot_cur->ctrl->options == 0xFF) if (get_hpc_options(slot_cur, &slot_cur->ctrl->options)) @@ -655,6 +607,7 @@ static int validate(struct slot *slot_cur, int opn) int ibmphp_update_slot_info(struct slot *slot_cur) { struct hotplug_slot_info *info; + struct pci_bus *bus = slot_cur->hotplug_slot->pci_slot->bus; int rc; u8 bus_speed; u8 mode; @@ -700,8 +653,7 @@ int ibmphp_update_slot_info(struct slot *slot_cur) bus_speed = PCI_SPEED_UNKNOWN; } - info->cur_bus_speed = bus_speed; - info->max_bus_speed = slot_cur->hotplug_slot->info->max_bus_speed; + bus->cur_bus_speed = bus_speed; // To do: bus_names rc = pci_hp_change_slot_info(slot_cur->hotplug_slot, info); @@ -1326,8 +1278,6 @@ struct hotplug_slot_ops ibmphp_hotplug_slot_ops = { .get_attention_status = get_attention_status, .get_latch_status = get_latch_status, .get_adapter_status = get_adapter_present, - .get_max_bus_speed = get_max_bus_speed, - .get_cur_bus_speed = get_cur_bus_speed, /* .get_max_adapter_speed = get_max_adapter_speed, .get_bus_name_status = get_bus_name, */ diff --git a/drivers/pci/hotplug/ibmphp_ebda.c b/drivers/pci/hotplug/ibmphp_ebda.c index c1abac8ab5c3..5becbdee4027 100644 --- a/drivers/pci/hotplug/ibmphp_ebda.c +++ b/drivers/pci/hotplug/ibmphp_ebda.c @@ -245,7 +245,7 @@ static void __init print_ebda_hpc (void) int __init ibmphp_access_ebda (void) { - u8 format, num_ctlrs, rio_complete, hs_complete; + u8 format, num_ctlrs, rio_complete, hs_complete, ebda_sz; u16 ebda_seg, num_entries, next_offset, offset, blk_id, sub_addr, re, rc_id, re_id, base; int rc = 0; @@ -260,7 +260,16 @@ int __init ibmphp_access_ebda (void) iounmap (io_mem); debug ("returned ebda segment: %x\n", ebda_seg); - io_mem = ioremap(ebda_seg<<4, 1024); + io_mem = ioremap(ebda_seg<<4, 1); + if (!io_mem) + return -ENOMEM; + ebda_sz = readb(io_mem); + iounmap(io_mem); + debug("ebda size: %d(KiB)\n", ebda_sz); + if (ebda_sz == 0) + return -ENOMEM; + + io_mem = ioremap(ebda_seg<<4, (ebda_sz * 1024)); if (!io_mem ) return -ENOMEM; next_offset = 0x180; diff --git a/drivers/pci/hotplug/ibmphp_hpc.c b/drivers/pci/hotplug/ibmphp_hpc.c index c7084f0eca5a..1aaf3f32d3cd 100644 --- a/drivers/pci/hotplug/ibmphp_hpc.c +++ b/drivers/pci/hotplug/ibmphp_hpc.c @@ -35,6 +35,7 @@ #include <linux/init.h> #include <linux/mutex.h> #include <linux/sched.h> +#include <linux/semaphore.h> #include <linux/kthread.h> #include "ibmphp.h" diff --git a/drivers/pci/hotplug/ibmphp_res.c b/drivers/pci/hotplug/ibmphp_res.c index ec73294d1fa6..e2dc289f767c 100644 --- a/drivers/pci/hotplug/ibmphp_res.c +++ b/drivers/pci/hotplug/ibmphp_res.c @@ -40,7 +40,7 @@ static void update_resources (struct bus_node *bus_cur, int type, int rangeno); static int once_over (void); static int remove_ranges (struct bus_node *, struct bus_node *); static int update_bridge_ranges (struct bus_node **); -static int add_range (int type, struct range_node *, struct bus_node *); +static int add_bus_range (int type, struct range_node *, struct bus_node *); static void fix_resources (struct bus_node *); static struct bus_node *find_bus_wprev (u8, struct bus_node **, u8); @@ -133,7 +133,7 @@ static int __init alloc_bus_range (struct bus_node **new_bus, struct range_node newrange->rangeno = 1; else { /* need to insert our range */ - add_range (flag, newrange, newbus); + add_bus_range (flag, newrange, newbus); debug ("%d resource Primary Bus inserted on bus %x [%x - %x]\n", flag, newbus->busno, newrange->start, newrange->end); } @@ -384,7 +384,7 @@ int __init ibmphp_rsrc_init (void) * Input: type of the resource, range to add, current bus * Output: 0 or -1, bus and range ptrs ********************************************************************************/ -static int add_range (int type, struct range_node *range, struct bus_node *bus_cur) +static int add_bus_range (int type, struct range_node *range, struct bus_node *bus_cur) { struct range_node *range_cur = NULL; struct range_node *range_prev; @@ -455,7 +455,7 @@ static int add_range (int type, struct range_node *range, struct bus_node *bus_c /******************************************************************************* * This routine goes through the list of resources of type 'type' and updates - * the range numbers that they correspond to. It was called from add_range fnc + * the range numbers that they correspond to. It was called from add_bus_range fnc * * Input: bus, type of the resource, the rangeno starting from which to update ******************************************************************************/ @@ -1999,7 +1999,7 @@ static int __init update_bridge_ranges (struct bus_node **bus) if (bus_sec->noIORanges > 0) { if (!range_exists_already (range, bus_sec, IO)) { - add_range (IO, range, bus_sec); + add_bus_range (IO, range, bus_sec); ++bus_sec->noIORanges; } else { kfree (range); @@ -2048,7 +2048,7 @@ static int __init update_bridge_ranges (struct bus_node **bus) if (bus_sec->noMemRanges > 0) { if (!range_exists_already (range, bus_sec, MEM)) { - add_range (MEM, range, bus_sec); + add_bus_range (MEM, range, bus_sec); ++bus_sec->noMemRanges; } else { kfree (range); @@ -2102,7 +2102,7 @@ static int __init update_bridge_ranges (struct bus_node **bus) if (bus_sec->noPFMemRanges > 0) { if (!range_exists_already (range, bus_sec, PFMEM)) { - add_range (PFMEM, range, bus_sec); + add_bus_range (PFMEM, range, bus_sec); ++bus_sec->noPFMemRanges; } else { kfree (range); diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index 38183a534b65..728b119f71ad 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -64,32 +64,6 @@ static int debug; static LIST_HEAD(pci_hotplug_slot_list); static DEFINE_MUTEX(pci_hp_mutex); -/* these strings match up with the values in pci_bus_speed */ -static char *pci_bus_speed_strings[] = { - "33 MHz PCI", /* 0x00 */ - "66 MHz PCI", /* 0x01 */ - "66 MHz PCI-X", /* 0x02 */ - "100 MHz PCI-X", /* 0x03 */ - "133 MHz PCI-X", /* 0x04 */ - NULL, /* 0x05 */ - NULL, /* 0x06 */ - NULL, /* 0x07 */ - NULL, /* 0x08 */ - "66 MHz PCI-X 266", /* 0x09 */ - "100 MHz PCI-X 266", /* 0x0a */ - "133 MHz PCI-X 266", /* 0x0b */ - NULL, /* 0x0c */ - NULL, /* 0x0d */ - NULL, /* 0x0e */ - NULL, /* 0x0f */ - NULL, /* 0x10 */ - "66 MHz PCI-X 533", /* 0x11 */ - "100 MHz PCI-X 533", /* 0x12 */ - "133 MHz PCI-X 533", /* 0x13 */ - "2.5 GT/s PCIe", /* 0x14 */ - "5.0 GT/s PCIe", /* 0x15 */ -}; - #ifdef CONFIG_HOTPLUG_PCI_CPCI extern int cpci_hotplug_init(int debug); extern void cpci_hotplug_exit(void); @@ -118,8 +92,6 @@ GET_STATUS(power_status, u8) GET_STATUS(attention_status, u8) GET_STATUS(latch_status, u8) GET_STATUS(adapter_status, u8) -GET_STATUS(max_bus_speed, enum pci_bus_speed) -GET_STATUS(cur_bus_speed, enum pci_bus_speed) static ssize_t power_read_file(struct pci_slot *slot, char *buf) { @@ -263,60 +235,6 @@ static struct pci_slot_attribute hotplug_slot_attr_presence = { .show = presence_read_file, }; -static char *unknown_speed = "Unknown bus speed"; - -static ssize_t max_bus_speed_read_file(struct pci_slot *slot, char *buf) -{ - char *speed_string; - int retval; - enum pci_bus_speed value; - - retval = get_max_bus_speed(slot->hotplug, &value); - if (retval) - goto exit; - - if (value == PCI_SPEED_UNKNOWN) - speed_string = unknown_speed; - else - speed_string = pci_bus_speed_strings[value]; - - retval = sprintf (buf, "%s\n", speed_string); - -exit: - return retval; -} - -static struct pci_slot_attribute hotplug_slot_attr_max_bus_speed = { - .attr = {.name = "max_bus_speed", .mode = S_IFREG | S_IRUGO}, - .show = max_bus_speed_read_file, -}; - -static ssize_t cur_bus_speed_read_file(struct pci_slot *slot, char *buf) -{ - char *speed_string; - int retval; - enum pci_bus_speed value; - - retval = get_cur_bus_speed(slot->hotplug, &value); - if (retval) - goto exit; - - if (value == PCI_SPEED_UNKNOWN) - speed_string = unknown_speed; - else - speed_string = pci_bus_speed_strings[value]; - - retval = sprintf (buf, "%s\n", speed_string); - -exit: - return retval; -} - -static struct pci_slot_attribute hotplug_slot_attr_cur_bus_speed = { - .attr = {.name = "cur_bus_speed", .mode = S_IFREG | S_IRUGO}, - .show = cur_bus_speed_read_file, -}; - static ssize_t test_write_file(struct pci_slot *pci_slot, const char *buf, size_t count) { @@ -391,26 +309,6 @@ static bool has_adapter_file(struct pci_slot *pci_slot) return false; } -static bool has_max_bus_speed_file(struct pci_slot *pci_slot) -{ - struct hotplug_slot *slot = pci_slot->hotplug; - if ((!slot) || (!slot->ops)) - return false; - if (slot->ops->get_max_bus_speed) - return true; - return false; -} - -static bool has_cur_bus_speed_file(struct pci_slot *pci_slot) -{ - struct hotplug_slot *slot = pci_slot->hotplug; - if ((!slot) || (!slot->ops)) - return false; - if (slot->ops->get_cur_bus_speed) - return true; - return false; -} - static bool has_test_file(struct pci_slot *pci_slot) { struct hotplug_slot *slot = pci_slot->hotplug; @@ -456,20 +354,6 @@ static int fs_add_slot(struct pci_slot *slot) goto exit_adapter; } - if (has_max_bus_speed_file(slot)) { - retval = sysfs_create_file(&slot->kobj, - &hotplug_slot_attr_max_bus_speed.attr); - if (retval) - goto exit_max_speed; - } - - if (has_cur_bus_speed_file(slot)) { - retval = sysfs_create_file(&slot->kobj, - &hotplug_slot_attr_cur_bus_speed.attr); - if (retval) - goto exit_cur_speed; - } - if (has_test_file(slot)) { retval = sysfs_create_file(&slot->kobj, &hotplug_slot_attr_test.attr); @@ -480,14 +364,6 @@ static int fs_add_slot(struct pci_slot *slot) goto exit; exit_test: - if (has_cur_bus_speed_file(slot)) - sysfs_remove_file(&slot->kobj, - &hotplug_slot_attr_cur_bus_speed.attr); -exit_cur_speed: - if (has_max_bus_speed_file(slot)) - sysfs_remove_file(&slot->kobj, - &hotplug_slot_attr_max_bus_speed.attr); -exit_max_speed: if (has_adapter_file(slot)) sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_presence.attr); @@ -523,14 +399,6 @@ static void fs_remove_slot(struct pci_slot *slot) sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_presence.attr); - if (has_max_bus_speed_file(slot)) - sysfs_remove_file(&slot->kobj, - &hotplug_slot_attr_max_bus_speed.attr); - - if (has_cur_bus_speed_file(slot)) - sysfs_remove_file(&slot->kobj, - &hotplug_slot_attr_cur_bus_speed.attr); - if (has_test_file(slot)) sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_test.attr); diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 5674b2075bdc..920f820edf87 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -69,8 +69,6 @@ static int get_power_status (struct hotplug_slot *slot, u8 *value); static int get_attention_status (struct hotplug_slot *slot, u8 *value); static int get_latch_status (struct hotplug_slot *slot, u8 *value); static int get_adapter_status (struct hotplug_slot *slot, u8 *value); -static int get_max_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value); -static int get_cur_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value); /** * release_slot - free up the memory used by a slot @@ -113,8 +111,6 @@ static int init_slot(struct controller *ctrl) ops->disable_slot = disable_slot; ops->get_power_status = get_power_status; ops->get_adapter_status = get_adapter_status; - ops->get_max_bus_speed = get_max_bus_speed; - ops->get_cur_bus_speed = get_cur_bus_speed; if (MRL_SENS(ctrl)) ops->get_latch_status = get_latch_status; if (ATTN_LED(ctrl)) { @@ -227,27 +223,6 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value) return pciehp_get_adapter_status(slot, value); } -static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, - enum pci_bus_speed *value) -{ - struct slot *slot = hotplug_slot->private; - - ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", - __func__, slot_name(slot)); - - return pciehp_get_max_link_speed(slot, value); -} - -static int get_cur_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value) -{ - struct slot *slot = hotplug_slot->private; - - ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", - __func__, slot_name(slot)); - - return pciehp_get_cur_link_speed(slot, value); -} - static int pciehp_probe(struct pcie_device *dev) { int rc; diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index d6ac1b261dd9..9a7f247e8ac1 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -341,6 +341,7 @@ void pciehp_queue_pushbutton_work(struct work_struct *work) p_slot->state = POWERON_STATE; break; default: + kfree(info); goto out; } queue_work(pciehp_wq, &info->work); diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 10040d58c8ef..40b48f569b1e 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -492,6 +492,7 @@ int pciehp_power_on_slot(struct slot * slot) u16 slot_cmd; u16 cmd_mask; u16 slot_status; + u16 lnk_status; int retval = 0; /* Clear sticky power-fault bit from previous power failures */ @@ -523,6 +524,14 @@ int pciehp_power_on_slot(struct slot * slot) ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__, pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_cmd); + retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status); + if (retval) { + ctrl_err(ctrl, "%s: Cannot read LNKSTA register\n", + __func__); + return retval; + } + pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status); + return retval; } @@ -610,37 +619,6 @@ static irqreturn_t pcie_isr(int irq, void *dev_id) return IRQ_HANDLED; } -int pciehp_get_max_link_speed(struct slot *slot, enum pci_bus_speed *value) -{ - struct controller *ctrl = slot->ctrl; - enum pcie_link_speed lnk_speed; - u32 lnk_cap; - int retval = 0; - - retval = pciehp_readl(ctrl, PCI_EXP_LNKCAP, &lnk_cap); - if (retval) { - ctrl_err(ctrl, "%s: Cannot read LNKCAP register\n", __func__); - return retval; - } - - switch (lnk_cap & 0x000F) { - case 1: - lnk_speed = PCIE_2_5GB; - break; - case 2: - lnk_speed = PCIE_5_0GB; - break; - default: - lnk_speed = PCIE_LNK_SPEED_UNKNOWN; - break; - } - - *value = lnk_speed; - ctrl_dbg(ctrl, "Max link speed = %d\n", lnk_speed); - - return retval; -} - int pciehp_get_max_lnk_width(struct slot *slot, enum pcie_link_width *value) { @@ -691,38 +669,6 @@ int pciehp_get_max_lnk_width(struct slot *slot, return retval; } -int pciehp_get_cur_link_speed(struct slot *slot, enum pci_bus_speed *value) -{ - struct controller *ctrl = slot->ctrl; - enum pcie_link_speed lnk_speed = PCI_SPEED_UNKNOWN; - int retval = 0; - u16 lnk_status; - - retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status); - if (retval) { - ctrl_err(ctrl, "%s: Cannot read LNKSTATUS register\n", - __func__); - return retval; - } - - switch (lnk_status & PCI_EXP_LNKSTA_CLS) { - case 1: - lnk_speed = PCIE_2_5GB; - break; - case 2: - lnk_speed = PCIE_5_0GB; - break; - default: - lnk_speed = PCIE_LNK_SPEED_UNKNOWN; - break; - } - - *value = lnk_speed; - ctrl_dbg(ctrl, "Current link speed = %d\n", lnk_speed); - - return retval; -} - int pciehp_get_cur_lnk_width(struct slot *slot, enum pcie_link_width *value) { diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c index 21733108adde..0a16444c14c9 100644 --- a/drivers/pci/hotplug/pciehp_pci.c +++ b/drivers/pci/hotplug/pciehp_pci.c @@ -53,17 +53,15 @@ static int __ref pciehp_add_bridge(struct pci_dev *dev) busnr = pci_scan_bridge(parent, dev, busnr, pass); if (!dev->subordinate) return -1; - pci_bus_size_bridges(dev->subordinate); - pci_bus_assign_resources(parent); - pci_enable_bridges(parent); - pci_bus_add_devices(parent); + return 0; } int pciehp_configure_device(struct slot *p_slot) { struct pci_dev *dev; - struct pci_bus *parent = p_slot->ctrl->pcie->port->subordinate; + struct pci_dev *bridge = p_slot->ctrl->pcie->port; + struct pci_bus *parent = bridge->subordinate; int num, fn; struct controller *ctrl = p_slot->ctrl; @@ -96,12 +94,25 @@ int pciehp_configure_device(struct slot *p_slot) (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) { pciehp_add_bridge(dev); } + pci_dev_put(dev); + } + + pci_assign_unassigned_bridge_resources(bridge); + + for (fn = 0; fn < 8; fn++) { + dev = pci_get_slot(parent, PCI_DEVFN(0, fn)); + if (!dev) + continue; + if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) { + pci_dev_put(dev); + continue; + } pci_configure_slot(dev); pci_dev_put(dev); } - pci_bus_assign_resources(parent); pci_bus_add_devices(parent); + return 0; } diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c index c159223389ec..dcaae725fd79 100644 --- a/drivers/pci/hotplug/rpaphp_core.c +++ b/drivers/pci/hotplug/rpaphp_core.c @@ -130,10 +130,9 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 * value) return 0; } -static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value) +static enum pci_bus_speed get_max_bus_speed(struct slot *slot) { - struct slot *slot = (struct slot *)hotplug_slot->private; - + enum pci_bus_speed speed; switch (slot->type) { case 1: case 2: @@ -141,30 +140,30 @@ static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_spe case 4: case 5: case 6: - *value = PCI_SPEED_33MHz; /* speed for case 1-6 */ + speed = PCI_SPEED_33MHz; /* speed for case 1-6 */ break; case 7: case 8: - *value = PCI_SPEED_66MHz; + speed = PCI_SPEED_66MHz; break; case 11: case 14: - *value = PCI_SPEED_66MHz_PCIX; + speed = PCI_SPEED_66MHz_PCIX; break; case 12: case 15: - *value = PCI_SPEED_100MHz_PCIX; + speed = PCI_SPEED_100MHz_PCIX; break; case 13: case 16: - *value = PCI_SPEED_133MHz_PCIX; + speed = PCI_SPEED_133MHz_PCIX; break; default: - *value = PCI_SPEED_UNKNOWN; + speed = PCI_SPEED_UNKNOWN; break; - } - return 0; + + return speed; } static int get_children_props(struct device_node *dn, const int **drc_indexes, @@ -408,6 +407,8 @@ static int enable_slot(struct hotplug_slot *hotplug_slot) slot->state = NOT_VALID; return -EINVAL; } + + slot->bus->max_bus_speed = get_max_bus_speed(slot); return 0; } @@ -429,7 +430,6 @@ struct hotplug_slot_ops rpaphp_hotplug_slot_ops = { .get_power_status = get_power_status, .get_attention_status = get_attention_status, .get_adapter_status = get_adapter_status, - .get_max_bus_speed = get_max_bus_speed, }; module_init(rpaphp_init); diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index 8e210cd76e55..d2627e1c3ac1 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -333,8 +333,6 @@ struct hpc_ops { int (*set_attention_status)(struct slot *slot, u8 status); int (*get_latch_status)(struct slot *slot, u8 *status); int (*get_adapter_status)(struct slot *slot, u8 *status); - int (*get_max_bus_speed)(struct slot *slot, enum pci_bus_speed *speed); - int (*get_cur_bus_speed)(struct slot *slot, enum pci_bus_speed *speed); int (*get_adapter_speed)(struct slot *slot, enum pci_bus_speed *speed); int (*get_mode1_ECC_cap)(struct slot *slot, u8 *mode); int (*get_prog_int)(struct slot *slot, u8 *prog_int); diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 8a520a3d0f59..a5062297f488 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -65,8 +65,6 @@ static int get_power_status (struct hotplug_slot *slot, u8 *value); static int get_attention_status (struct hotplug_slot *slot, u8 *value); static int get_latch_status (struct hotplug_slot *slot, u8 *value); static int get_adapter_status (struct hotplug_slot *slot, u8 *value); -static int get_max_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value); -static int get_cur_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value); static struct hotplug_slot_ops shpchp_hotplug_slot_ops = { .set_attention_status = set_attention_status, @@ -76,8 +74,6 @@ static struct hotplug_slot_ops shpchp_hotplug_slot_ops = { .get_attention_status = get_attention_status, .get_latch_status = get_latch_status, .get_adapter_status = get_adapter_status, - .get_max_bus_speed = get_max_bus_speed, - .get_cur_bus_speed = get_cur_bus_speed, }; /** @@ -279,37 +275,6 @@ static int get_adapter_status (struct hotplug_slot *hotplug_slot, u8 *value) return 0; } -static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, - enum pci_bus_speed *value) -{ - struct slot *slot = get_slot(hotplug_slot); - int retval; - - ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", - __func__, slot_name(slot)); - - retval = slot->hpc_ops->get_max_bus_speed(slot, value); - if (retval < 0) - *value = PCI_SPEED_UNKNOWN; - - return 0; -} - -static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value) -{ - struct slot *slot = get_slot(hotplug_slot); - int retval; - - ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", - __func__, slot_name(slot)); - - retval = slot->hpc_ops->get_cur_bus_speed(slot, value); - if (retval < 0) - *value = PCI_SPEED_UNKNOWN; - - return 0; -} - static int is_shpc_capable(struct pci_dev *dev) { if ((dev->vendor == PCI_VENDOR_ID_AMD) || (dev->device == diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index b8ab2796e66a..3bba0c0888ff 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -285,17 +285,8 @@ static int board_added(struct slot *p_slot) return WRONG_BUS_FREQUENCY; } - rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bsp); - if (rc) { - ctrl_err(ctrl, "Can't get bus operation speed\n"); - return WRONG_BUS_FREQUENCY; - } - - rc = p_slot->hpc_ops->get_max_bus_speed(p_slot, &msp); - if (rc) { - ctrl_err(ctrl, "Can't get max bus operation speed\n"); - msp = bsp; - } + bsp = ctrl->pci_dev->bus->cur_bus_speed; + msp = ctrl->pci_dev->bus->max_bus_speed; /* Check if there are other slots or devices on the same bus */ if (!list_empty(&ctrl->pci_dev->subordinate->devices)) @@ -462,6 +453,7 @@ void shpchp_queue_pushbutton_work(struct work_struct *work) p_slot->state = POWERON_STATE; break; default: + kfree(info); goto out; } queue_work(shpchp_wq, &info->work); diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c index 86dc39847769..5f5e8d2e3552 100644 --- a/drivers/pci/hotplug/shpchp_hpc.c +++ b/drivers/pci/hotplug/shpchp_hpc.c @@ -660,6 +660,75 @@ static int hpc_slot_disable(struct slot * slot) return retval; } +static int shpc_get_cur_bus_speed(struct controller *ctrl) +{ + int retval = 0; + struct pci_bus *bus = ctrl->pci_dev->subordinate; + enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN; + u16 sec_bus_reg = shpc_readw(ctrl, SEC_BUS_CONFIG); + u8 pi = shpc_readb(ctrl, PROG_INTERFACE); + u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7); + + if ((pi == 1) && (speed_mode > 4)) { + retval = -ENODEV; + goto out; + } + + switch (speed_mode) { + case 0x0: + bus_speed = PCI_SPEED_33MHz; + break; + case 0x1: + bus_speed = PCI_SPEED_66MHz; + break; + case 0x2: + bus_speed = PCI_SPEED_66MHz_PCIX; + break; + case 0x3: + bus_speed = PCI_SPEED_100MHz_PCIX; + break; + case 0x4: + bus_speed = PCI_SPEED_133MHz_PCIX; + break; + case 0x5: + bus_speed = PCI_SPEED_66MHz_PCIX_ECC; + break; + case 0x6: + bus_speed = PCI_SPEED_100MHz_PCIX_ECC; + break; + case 0x7: + bus_speed = PCI_SPEED_133MHz_PCIX_ECC; + break; + case 0x8: + bus_speed = PCI_SPEED_66MHz_PCIX_266; + break; + case 0x9: + bus_speed = PCI_SPEED_100MHz_PCIX_266; + break; + case 0xa: + bus_speed = PCI_SPEED_133MHz_PCIX_266; + break; + case 0xb: + bus_speed = PCI_SPEED_66MHz_PCIX_533; + break; + case 0xc: + bus_speed = PCI_SPEED_100MHz_PCIX_533; + break; + case 0xd: + bus_speed = PCI_SPEED_133MHz_PCIX_533; + break; + default: + retval = -ENODEV; + break; + } + + out: + bus->cur_bus_speed = bus_speed; + dbg("Current bus speed = %d\n", bus_speed); + return retval; +} + + static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value) { int retval; @@ -720,6 +789,8 @@ static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value) retval = shpc_write_cmd(slot, 0, cmd); if (retval) ctrl_err(ctrl, "%s: Write command failed!\n", __func__); + else + shpc_get_cur_bus_speed(ctrl); return retval; } @@ -803,10 +874,10 @@ static irqreturn_t shpc_isr(int irq, void *dev_id) return IRQ_HANDLED; } -static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value) +static int shpc_get_max_bus_speed(struct controller *ctrl) { int retval = 0; - struct controller *ctrl = slot->ctrl; + struct pci_bus *bus = ctrl->pci_dev->subordinate; enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN; u8 pi = shpc_readb(ctrl, PROG_INTERFACE); u32 slot_avail1 = shpc_readl(ctrl, SLOT_AVAIL1); @@ -842,79 +913,12 @@ static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value) retval = -ENODEV; } - *value = bus_speed; + bus->max_bus_speed = bus_speed; ctrl_dbg(ctrl, "Max bus speed = %d\n", bus_speed); return retval; } -static int hpc_get_cur_bus_speed (struct slot *slot, enum pci_bus_speed *value) -{ - int retval = 0; - struct controller *ctrl = slot->ctrl; - enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN; - u16 sec_bus_reg = shpc_readw(ctrl, SEC_BUS_CONFIG); - u8 pi = shpc_readb(ctrl, PROG_INTERFACE); - u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7); - - if ((pi == 1) && (speed_mode > 4)) { - *value = PCI_SPEED_UNKNOWN; - return -ENODEV; - } - - switch (speed_mode) { - case 0x0: - *value = PCI_SPEED_33MHz; - break; - case 0x1: - *value = PCI_SPEED_66MHz; - break; - case 0x2: - *value = PCI_SPEED_66MHz_PCIX; - break; - case 0x3: - *value = PCI_SPEED_100MHz_PCIX; - break; - case 0x4: - *value = PCI_SPEED_133MHz_PCIX; - break; - case 0x5: - *value = PCI_SPEED_66MHz_PCIX_ECC; - break; - case 0x6: - *value = PCI_SPEED_100MHz_PCIX_ECC; - break; - case 0x7: - *value = PCI_SPEED_133MHz_PCIX_ECC; - break; - case 0x8: - *value = PCI_SPEED_66MHz_PCIX_266; - break; - case 0x9: - *value = PCI_SPEED_100MHz_PCIX_266; - break; - case 0xa: - *value = PCI_SPEED_133MHz_PCIX_266; - break; - case 0xb: - *value = PCI_SPEED_66MHz_PCIX_533; - break; - case 0xc: - *value = PCI_SPEED_100MHz_PCIX_533; - break; - case 0xd: - *value = PCI_SPEED_133MHz_PCIX_533; - break; - default: - *value = PCI_SPEED_UNKNOWN; - retval = -ENODEV; - break; - } - - ctrl_dbg(ctrl, "Current bus speed = %d\n", bus_speed); - return retval; -} - static struct hpc_ops shpchp_hpc_ops = { .power_on_slot = hpc_power_on_slot, .slot_enable = hpc_slot_enable, @@ -926,8 +930,6 @@ static struct hpc_ops shpchp_hpc_ops = { .get_latch_status = hpc_get_latch_status, .get_adapter_status = hpc_get_adapter_status, - .get_max_bus_speed = hpc_get_max_bus_speed, - .get_cur_bus_speed = hpc_get_cur_bus_speed, .get_adapter_speed = hpc_get_adapter_speed, .get_mode1_ECC_cap = hpc_get_mode1_ECC_cap, .get_prog_int = hpc_get_prog_int, @@ -1086,6 +1088,9 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev) } ctrl_dbg(ctrl, "HPC at %s irq=%x\n", pci_name(pdev), pdev->irq); + shpc_get_max_bus_speed(ctrl); + shpc_get_cur_bus_speed(ctrl); + /* * If this is the first controller to be initialized, * initialize the shpchpd work queue diff --git a/drivers/pci/hotplug/shpchp_sysfs.c b/drivers/pci/hotplug/shpchp_sysfs.c index 29fa9d26adae..071b7dc0094b 100644 --- a/drivers/pci/hotplug/shpchp_sysfs.c +++ b/drivers/pci/hotplug/shpchp_sysfs.c @@ -47,8 +47,7 @@ static ssize_t show_ctrl (struct device *dev, struct device_attribute *attr, cha bus = pdev->subordinate; out += sprintf(buf, "Free resources: memory\n"); - for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) { - res = bus->resource[index]; + pci_bus_for_each_resource(bus, res, index) { if (res && (res->flags & IORESOURCE_MEM) && !(res->flags & IORESOURCE_PREFETCH)) { out += sprintf(out, "start = %8.8llx, " @@ -58,8 +57,7 @@ static ssize_t show_ctrl (struct device *dev, struct device_attribute *attr, cha } } out += sprintf(out, "Free resources: prefetchable memory\n"); - for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) { - res = bus->resource[index]; + pci_bus_for_each_resource(bus, res, index) { if (res && (res->flags & IORESOURCE_MEM) && (res->flags & IORESOURCE_PREFETCH)) { out += sprintf(out, "start = %8.8llx, " @@ -69,8 +67,7 @@ static ssize_t show_ctrl (struct device *dev, struct device_attribute *attr, cha } } out += sprintf(out, "Free resources: IO\n"); - for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) { - res = bus->resource[index]; + pci_bus_for_each_resource(bus, res, index) { if (res && (res->flags & IORESOURCE_IO)) { out += sprintf(out, "start = %8.8llx, " "length = %8.8llx\n", diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c index b2a448e19fe6..3e5ab2bf6a5c 100644 --- a/drivers/pci/iov.c +++ b/drivers/pci/iov.c @@ -706,6 +706,21 @@ irqreturn_t pci_sriov_migration(struct pci_dev *dev) } EXPORT_SYMBOL_GPL(pci_sriov_migration); +/** + * pci_num_vf - return number of VFs associated with a PF device_release_driver + * @dev: the PCI device + * + * Returns number of VFs, or 0 if SR-IOV is not enabled. + */ +int pci_num_vf(struct pci_dev *dev) +{ + if (!dev || !dev->is_physfn) + return 0; + else + return dev->sriov->nr_virtfn; +} +EXPORT_SYMBOL_GPL(pci_num_vf); + static int ats_alloc_one(struct pci_dev *dev, int ps) { int pos; diff --git a/drivers/pci/legacy.c b/drivers/pci/legacy.c deleted file mode 100644 index 871f65c15936..000000000000 --- a/drivers/pci/legacy.c +++ /dev/null @@ -1,34 +0,0 @@ -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include "pci.h" - -/** - * pci_find_device - begin or continue searching for a PCI device by vendor/device id - * @vendor: PCI vendor id to match, or %PCI_ANY_ID to match all vendor ids - * @device: PCI device id to match, or %PCI_ANY_ID to match all device ids - * @from: Previous PCI device found in search, or %NULL for new search. - * - * Iterates through the list of known PCI devices. If a PCI device is found - * with a matching @vendor and @device, a pointer to its device structure is - * returned. Otherwise, %NULL is returned. - * A new search is initiated by passing %NULL as the @from argument. - * Otherwise if @from is not %NULL, searches continue from next device - * on the global list. - * - * NOTE: Do not use this function any more; use pci_get_device() instead, as - * the PCI device returned by this function can disappear at any moment in - * time. - */ -struct pci_dev *pci_find_device(unsigned int vendor, unsigned int device, - struct pci_dev *from) -{ - struct pci_dev *pdev; - - pci_dev_get(from); - pdev = pci_get_subsys(vendor, device, PCI_ANY_ID, PCI_ANY_ID, from); - pci_dev_put(pdev); - return pdev; -} -EXPORT_SYMBOL(pci_find_device); diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 7e2829538a4c..2e7a3bf13824 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -16,8 +16,144 @@ #include <acpi/acpi_bus.h> #include <linux/pci-acpi.h> +#include <linux/pm_runtime.h> #include "pci.h" +static DEFINE_MUTEX(pci_acpi_pm_notify_mtx); + +/** + * pci_acpi_wake_bus - Wake-up notification handler for root buses. + * @handle: ACPI handle of a device the notification is for. + * @event: Type of the signaled event. + * @context: PCI root bus to wake up devices on. + */ +static void pci_acpi_wake_bus(acpi_handle handle, u32 event, void *context) +{ + struct pci_bus *pci_bus = context; + + if (event == ACPI_NOTIFY_DEVICE_WAKE && pci_bus) + pci_pme_wakeup_bus(pci_bus); +} + +/** + * pci_acpi_wake_dev - Wake-up notification handler for PCI devices. + * @handle: ACPI handle of a device the notification is for. + * @event: Type of the signaled event. + * @context: PCI device object to wake up. + */ +static void pci_acpi_wake_dev(acpi_handle handle, u32 event, void *context) +{ + struct pci_dev *pci_dev = context; + + if (event == ACPI_NOTIFY_DEVICE_WAKE && pci_dev) { + pci_check_pme_status(pci_dev); + pm_runtime_resume(&pci_dev->dev); + if (pci_dev->subordinate) + pci_pme_wakeup_bus(pci_dev->subordinate); + } +} + +/** + * add_pm_notifier - Register PM notifier for given ACPI device. + * @dev: ACPI device to add the notifier for. + * @context: PCI device or bus to check for PME status if an event is signaled. + * + * NOTE: @dev need not be a run-wake or wake-up device to be a valid source of + * PM wake-up events. For example, wake-up events may be generated for bridges + * if one of the devices below the bridge is signaling PME, even if the bridge + * itself doesn't have a wake-up GPE associated with it. + */ +static acpi_status add_pm_notifier(struct acpi_device *dev, + acpi_notify_handler handler, + void *context) +{ + acpi_status status = AE_ALREADY_EXISTS; + + mutex_lock(&pci_acpi_pm_notify_mtx); + + if (dev->wakeup.flags.notifier_present) + goto out; + + status = acpi_install_notify_handler(dev->handle, + ACPI_SYSTEM_NOTIFY, + handler, context); + if (ACPI_FAILURE(status)) + goto out; + + dev->wakeup.flags.notifier_present = true; + + out: + mutex_unlock(&pci_acpi_pm_notify_mtx); + return status; +} + +/** + * remove_pm_notifier - Unregister PM notifier from given ACPI device. + * @dev: ACPI device to remove the notifier from. + */ +static acpi_status remove_pm_notifier(struct acpi_device *dev, + acpi_notify_handler handler) +{ + acpi_status status = AE_BAD_PARAMETER; + + mutex_lock(&pci_acpi_pm_notify_mtx); + + if (!dev->wakeup.flags.notifier_present) + goto out; + + status = acpi_remove_notify_handler(dev->handle, + ACPI_SYSTEM_NOTIFY, + handler); + if (ACPI_FAILURE(status)) + goto out; + + dev->wakeup.flags.notifier_present = false; + + out: + mutex_unlock(&pci_acpi_pm_notify_mtx); + return status; +} + +/** + * pci_acpi_add_bus_pm_notifier - Register PM notifier for given PCI bus. + * @dev: ACPI device to add the notifier for. + * @pci_bus: PCI bus to walk checking for PME status if an event is signaled. + */ +acpi_status pci_acpi_add_bus_pm_notifier(struct acpi_device *dev, + struct pci_bus *pci_bus) +{ + return add_pm_notifier(dev, pci_acpi_wake_bus, pci_bus); +} + +/** + * pci_acpi_remove_bus_pm_notifier - Unregister PCI bus PM notifier. + * @dev: ACPI device to remove the notifier from. + */ +acpi_status pci_acpi_remove_bus_pm_notifier(struct acpi_device *dev) +{ + return remove_pm_notifier(dev, pci_acpi_wake_bus); +} + +/** + * pci_acpi_add_pm_notifier - Register PM notifier for given PCI device. + * @dev: ACPI device to add the notifier for. + * @pci_dev: PCI device to check for the PME status if an event is signaled. + */ +acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev, + struct pci_dev *pci_dev) +{ + return add_pm_notifier(dev, pci_acpi_wake_dev, pci_dev); +} + +/** + * pci_acpi_remove_pm_notifier - Unregister PCI device PM notifier. + * @dev: ACPI device to remove the notifier from. + */ +acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev) +{ + return remove_pm_notifier(dev, pci_acpi_wake_dev); +} + /* * _SxD returns the D-state with the highest power * (lowest D-state number) supported in the S-state "x". @@ -131,19 +267,94 @@ static int acpi_pci_sleep_wake(struct pci_dev *dev, bool enable) return 0; } +/** + * acpi_dev_run_wake - Enable/disable wake-up for given device. + * @phys_dev: Device to enable/disable the platform to wake-up the system for. + * @enable: Whether enable or disable the wake-up functionality. + * + * Find the ACPI device object corresponding to @pci_dev and try to + * enable/disable the GPE associated with it. + */ +static int acpi_dev_run_wake(struct device *phys_dev, bool enable) +{ + struct acpi_device *dev; + acpi_handle handle; + int error = -ENODEV; + + if (!device_run_wake(phys_dev)) + return -EINVAL; + + handle = DEVICE_ACPI_HANDLE(phys_dev); + if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &dev))) { + dev_dbg(phys_dev, "ACPI handle has no context in %s!\n", + __func__); + return -ENODEV; + } + + if (enable) { + if (!dev->wakeup.run_wake_count++) { + acpi_enable_wakeup_device_power(dev, ACPI_STATE_S0); + acpi_enable_gpe(dev->wakeup.gpe_device, + dev->wakeup.gpe_number, + ACPI_GPE_TYPE_RUNTIME); + } + } else if (dev->wakeup.run_wake_count > 0) { + if (!--dev->wakeup.run_wake_count) { + acpi_disable_gpe(dev->wakeup.gpe_device, + dev->wakeup.gpe_number, + ACPI_GPE_TYPE_RUNTIME); + acpi_disable_wakeup_device_power(dev); + } + } else { + error = -EALREADY; + } + + return error; +} + +static void acpi_pci_propagate_run_wake(struct pci_bus *bus, bool enable) +{ + while (bus->parent) { + struct pci_dev *bridge = bus->self; + + if (bridge->pme_interrupt) + return; + if (!acpi_dev_run_wake(&bridge->dev, enable)) + return; + bus = bus->parent; + } + + /* We have reached the root bus. */ + if (bus->bridge) + acpi_dev_run_wake(bus->bridge, enable); +} + +static int acpi_pci_run_wake(struct pci_dev *dev, bool enable) +{ + if (dev->pme_interrupt) + return 0; + + if (!acpi_dev_run_wake(&dev->dev, enable)) + return 0; + + acpi_pci_propagate_run_wake(dev->bus, enable); + return 0; +} + static struct pci_platform_pm_ops acpi_pci_platform_pm = { .is_manageable = acpi_pci_power_manageable, .set_state = acpi_pci_set_power_state, .choose_state = acpi_pci_choose_state, .can_wakeup = acpi_pci_can_wakeup, .sleep_wake = acpi_pci_sleep_wake, + .run_wake = acpi_pci_run_wake, }; /* ACPI bus type */ static int acpi_pci_find_device(struct device *dev, acpi_handle *handle) { struct pci_dev * pci_dev; - acpi_integer addr; + u64 addr; pci_dev = to_pci_dev(dev); /* Please ref to ACPI spec for the syntax of _ADR */ diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index e5d47be3c6d7..f9a0aec3abcf 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -17,6 +17,7 @@ #include <linux/slab.h> #include <linux/sched.h> #include <linux/cpu.h> +#include <linux/pm_runtime.h> #include "pci.h" struct pci_dynid { @@ -404,6 +405,35 @@ static void pci_device_shutdown(struct device *dev) pci_msix_shutdown(pci_dev); } +#ifdef CONFIG_PM_OPS + +/* Auxiliary functions used for system resume and run-time resume. */ + +/** + * pci_restore_standard_config - restore standard config registers of PCI device + * @pci_dev: PCI device to handle + */ +static int pci_restore_standard_config(struct pci_dev *pci_dev) +{ + pci_update_current_state(pci_dev, PCI_UNKNOWN); + + if (pci_dev->current_state != PCI_D0) { + int error = pci_set_power_state(pci_dev, PCI_D0); + if (error) + return error; + } + + return pci_restore_state(pci_dev); +} + +static void pci_pm_default_resume_early(struct pci_dev *pci_dev) +{ + pci_restore_standard_config(pci_dev); + pci_fixup_device(pci_fixup_resume_early, pci_dev); +} + +#endif + #ifdef CONFIG_PM_SLEEP /* @@ -520,29 +550,6 @@ static int pci_legacy_resume(struct device *dev) /* Auxiliary functions used by the new power management framework */ -/** - * pci_restore_standard_config - restore standard config registers of PCI device - * @pci_dev: PCI device to handle - */ -static int pci_restore_standard_config(struct pci_dev *pci_dev) -{ - pci_update_current_state(pci_dev, PCI_UNKNOWN); - - if (pci_dev->current_state != PCI_D0) { - int error = pci_set_power_state(pci_dev, PCI_D0); - if (error) - return error; - } - - return pci_restore_state(pci_dev); -} - -static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev) -{ - pci_restore_standard_config(pci_dev); - pci_fixup_device(pci_fixup_resume_early, pci_dev); -} - static void pci_pm_default_resume(struct pci_dev *pci_dev) { pci_fixup_device(pci_fixup_resume, pci_dev); @@ -581,6 +588,17 @@ static int pci_pm_prepare(struct device *dev) struct device_driver *drv = dev->driver; int error = 0; + /* + * PCI devices suspended at run time need to be resumed at this + * point, because in general it is necessary to reconfigure them for + * system suspend. Namely, if the device is supposed to wake up the + * system from the sleep state, we may need to reconfigure it for this + * purpose. In turn, if the device is not supposed to wake up the + * system from the sleep state, we'll have to prevent it from signaling + * wake-up. + */ + pm_runtime_resume(dev); + if (drv && drv->pm && drv->pm->prepare) error = drv->pm->prepare(dev); @@ -595,6 +613,13 @@ static void pci_pm_complete(struct device *dev) drv->pm->complete(dev); } +#else /* !CONFIG_PM_SLEEP */ + +#define pci_pm_prepare NULL +#define pci_pm_complete NULL + +#endif /* !CONFIG_PM_SLEEP */ + #ifdef CONFIG_SUSPEND static int pci_pm_suspend(struct device *dev) @@ -681,7 +706,7 @@ static int pci_pm_resume_noirq(struct device *dev) struct device_driver *drv = dev->driver; int error = 0; - pci_pm_default_resume_noirq(pci_dev); + pci_pm_default_resume_early(pci_dev); if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_resume_early(dev); @@ -879,7 +904,7 @@ static int pci_pm_restore_noirq(struct device *dev) struct device_driver *drv = dev->driver; int error = 0; - pci_pm_default_resume_noirq(pci_dev); + pci_pm_default_resume_early(pci_dev); if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_resume_early(dev); @@ -931,6 +956,84 @@ static int pci_pm_restore(struct device *dev) #endif /* !CONFIG_HIBERNATION */ +#ifdef CONFIG_PM_RUNTIME + +static int pci_pm_runtime_suspend(struct device *dev) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + pci_power_t prev = pci_dev->current_state; + int error; + + if (!pm || !pm->runtime_suspend) + return -ENOSYS; + + error = pm->runtime_suspend(dev); + suspend_report_result(pm->runtime_suspend, error); + if (error) + return error; + + pci_fixup_device(pci_fixup_suspend, pci_dev); + + if (!pci_dev->state_saved && pci_dev->current_state != PCI_D0 + && pci_dev->current_state != PCI_UNKNOWN) { + WARN_ONCE(pci_dev->current_state != prev, + "PCI PM: State of device not saved by %pF\n", + pm->runtime_suspend); + return 0; + } + + if (!pci_dev->state_saved) + pci_save_state(pci_dev); + + pci_finish_runtime_suspend(pci_dev); + + return 0; +} + +static int pci_pm_runtime_resume(struct device *dev) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + + if (!pm || !pm->runtime_resume) + return -ENOSYS; + + pci_pm_default_resume_early(pci_dev); + __pci_enable_wake(pci_dev, PCI_D0, true, false); + pci_fixup_device(pci_fixup_resume, pci_dev); + + return pm->runtime_resume(dev); +} + +static int pci_pm_runtime_idle(struct device *dev) +{ + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + + if (!pm) + return -ENOSYS; + + if (pm->runtime_idle) { + int ret = pm->runtime_idle(dev); + if (ret) + return ret; + } + + pm_runtime_suspend(dev); + + return 0; +} + +#else /* !CONFIG_PM_RUNTIME */ + +#define pci_pm_runtime_suspend NULL +#define pci_pm_runtime_resume NULL +#define pci_pm_runtime_idle NULL + +#endif /* !CONFIG_PM_RUNTIME */ + +#ifdef CONFIG_PM_OPS + const struct dev_pm_ops pci_dev_pm_ops = { .prepare = pci_pm_prepare, .complete = pci_pm_complete, @@ -946,15 +1049,18 @@ const struct dev_pm_ops pci_dev_pm_ops = { .thaw_noirq = pci_pm_thaw_noirq, .poweroff_noirq = pci_pm_poweroff_noirq, .restore_noirq = pci_pm_restore_noirq, + .runtime_suspend = pci_pm_runtime_suspend, + .runtime_resume = pci_pm_runtime_resume, + .runtime_idle = pci_pm_runtime_idle, }; #define PCI_PM_OPS_PTR (&pci_dev_pm_ops) -#else /* !CONFIG_PM_SLEEP */ +#else /* !COMFIG_PM_OPS */ #define PCI_PM_OPS_PTR NULL -#endif /* !CONFIG_PM_SLEEP */ +#endif /* !COMFIG_PM_OPS */ /** * __pci_register_driver - register a new pci driver diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 807224ec8351..de296452c957 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -642,6 +642,7 @@ void pci_create_legacy_files(struct pci_bus *b) if (!b->legacy_io) goto kzalloc_err; + sysfs_bin_attr_init(b->legacy_io); b->legacy_io->attr.name = "legacy_io"; b->legacy_io->size = 0xffff; b->legacy_io->attr.mode = S_IRUSR | S_IWUSR; @@ -654,6 +655,7 @@ void pci_create_legacy_files(struct pci_bus *b) goto legacy_io_err; /* Allocated above after the legacy_io struct */ + sysfs_bin_attr_init(b->legacy_mem); b->legacy_mem = b->legacy_io + 1; b->legacy_mem->attr.name = "legacy_mem"; b->legacy_mem->size = 1024*1024; @@ -800,6 +802,7 @@ static int pci_create_attr(struct pci_dev *pdev, int num, int write_combine) if (res_attr) { char *res_attr_name = (char *)(res_attr + 1); + sysfs_bin_attr_init(res_attr); if (write_combine) { pdev->res_attr_wc[num] = res_attr; sprintf(res_attr_name, "resource%d_wc", num); @@ -972,6 +975,7 @@ static int pci_create_capabilities_sysfs(struct pci_dev *dev) if (!attr) return -ENOMEM; + sysfs_bin_attr_init(attr); attr->size = dev->vpd->len; attr->attr.name = "vpd"; attr->attr.mode = S_IRUSR | S_IWUSR; @@ -1038,6 +1042,7 @@ int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev) retval = -ENOMEM; goto err_resource_files; } + sysfs_bin_attr_init(attr); attr->size = rom_size; attr->attr.name = "rom"; attr->attr.mode = S_IRUSR; diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 315fea47e784..cb1dd5f4988c 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -19,8 +19,8 @@ #include <linux/pci-aspm.h> #include <linux/pm_wakeup.h> #include <linux/interrupt.h> -#include <asm/dma.h> /* isa_dma_bridge_buggy */ #include <linux/device.h> +#include <linux/pm_runtime.h> #include <asm/setup.h> #include "pci.h" @@ -29,6 +29,12 @@ const char *pci_power_names[] = { }; EXPORT_SYMBOL_GPL(pci_power_names); +int isa_dma_bridge_buggy; +EXPORT_SYMBOL(isa_dma_bridge_buggy); + +int pci_pci_problems; +EXPORT_SYMBOL(pci_pci_problems); + unsigned int pci_pm_d3_delay; static void pci_dev_d3_sleep(struct pci_dev *dev) @@ -297,6 +303,49 @@ int pci_find_ext_capability(struct pci_dev *dev, int cap) } EXPORT_SYMBOL_GPL(pci_find_ext_capability); +/** + * pci_bus_find_ext_capability - find an extended capability + * @bus: the PCI bus to query + * @devfn: PCI device to query + * @cap: capability code + * + * Like pci_find_ext_capability() but works for pci devices that do not have a + * pci_dev structure set up yet. + * + * Returns the address of the requested capability structure within the + * device's PCI configuration space or 0 in case the device does not + * support it. + */ +int pci_bus_find_ext_capability(struct pci_bus *bus, unsigned int devfn, + int cap) +{ + u32 header; + int ttl; + int pos = PCI_CFG_SPACE_SIZE; + + /* minimum 8 bytes per capability */ + ttl = (PCI_CFG_SPACE_EXP_SIZE - PCI_CFG_SPACE_SIZE) / 8; + + if (!pci_bus_read_config_dword(bus, devfn, pos, &header)) + return 0; + if (header == 0xffffffff || header == 0) + return 0; + + while (ttl-- > 0) { + if (PCI_EXT_CAP_ID(header) == cap) + return pos; + + pos = PCI_EXT_CAP_NEXT(header); + if (pos < PCI_CFG_SPACE_SIZE) + break; + + if (!pci_bus_read_config_dword(bus, devfn, pos, &header)) + break; + } + + return 0; +} + static int __pci_find_next_ht_cap(struct pci_dev *dev, int pos, int ht_cap) { int rc, ttl = PCI_FIND_CAP_TTL; @@ -380,10 +429,9 @@ pci_find_parent_resource(const struct pci_dev *dev, struct resource *res) { const struct pci_bus *bus = dev->bus; int i; - struct resource *best = NULL; + struct resource *best = NULL, *r; - for(i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { - struct resource *r = bus->resource[i]; + pci_bus_for_each_resource(bus, r, i) { if (!r) continue; if (res->start && !(res->start >= r->start && res->end <= r->end)) @@ -457,6 +505,12 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable) pci_platform_pm->sleep_wake(dev, enable) : -ENODEV; } +static inline int platform_pci_run_wake(struct pci_dev *dev, bool enable) +{ + return pci_platform_pm ? + pci_platform_pm->run_wake(dev, enable) : -ENODEV; +} + /** * pci_raw_set_power_state - Use PCI PM registers to set the power state of * given PCI device @@ -1190,6 +1244,66 @@ int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state) } /** + * pci_check_pme_status - Check if given device has generated PME. + * @dev: Device to check. + * + * Check the PME status of the device and if set, clear it and clear PME enable + * (if set). Return 'true' if PME status and PME enable were both set or + * 'false' otherwise. + */ +bool pci_check_pme_status(struct pci_dev *dev) +{ + int pmcsr_pos; + u16 pmcsr; + bool ret = false; + + if (!dev->pm_cap) + return false; + + pmcsr_pos = dev->pm_cap + PCI_PM_CTRL; + pci_read_config_word(dev, pmcsr_pos, &pmcsr); + if (!(pmcsr & PCI_PM_CTRL_PME_STATUS)) + return false; + + /* Clear PME status. */ + pmcsr |= PCI_PM_CTRL_PME_STATUS; + if (pmcsr & PCI_PM_CTRL_PME_ENABLE) { + /* Disable PME to avoid interrupt flood. */ + pmcsr &= ~PCI_PM_CTRL_PME_ENABLE; + ret = true; + } + + pci_write_config_word(dev, pmcsr_pos, pmcsr); + + return ret; +} + +/** + * pci_pme_wakeup - Wake up a PCI device if its PME Status bit is set. + * @dev: Device to handle. + * @ign: Ignored. + * + * Check if @dev has generated PME and queue a resume request for it in that + * case. + */ +static int pci_pme_wakeup(struct pci_dev *dev, void *ign) +{ + if (pci_check_pme_status(dev)) + pm_request_resume(&dev->dev); + return 0; +} + +/** + * pci_pme_wakeup_bus - Walk given bus and wake up devices on it, if necessary. + * @bus: Top bus of the subtree to walk. + */ +void pci_pme_wakeup_bus(struct pci_bus *bus) +{ + if (bus) + pci_walk_bus(bus, pci_pme_wakeup, NULL); +} + +/** * pci_pme_capable - check the capability of PCI device to generate PME# * @dev: PCI device to handle. * @state: PCI state from which device will issue PME#. @@ -1230,9 +1344,10 @@ void pci_pme_active(struct pci_dev *dev, bool enable) } /** - * pci_enable_wake - enable PCI device as wakeup event source + * __pci_enable_wake - enable PCI device as wakeup event source * @dev: PCI device affected * @state: PCI state from which device will issue wakeup events + * @runtime: True if the events are to be generated at run time * @enable: True to enable event generation; false to disable * * This enables the device as a wakeup event source, or disables it. @@ -1248,11 +1363,12 @@ void pci_pme_active(struct pci_dev *dev, bool enable) * Error code depending on the platform is returned if both the platform and * the native mechanism fail to enable the generation of wake-up events */ -int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable) +int __pci_enable_wake(struct pci_dev *dev, pci_power_t state, + bool runtime, bool enable) { int ret = 0; - if (enable && !device_may_wakeup(&dev->dev)) + if (enable && !runtime && !device_may_wakeup(&dev->dev)) return -EINVAL; /* Don't do the same thing twice in a row for one device. */ @@ -1272,19 +1388,24 @@ int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable) pci_pme_active(dev, true); else ret = 1; - error = platform_pci_sleep_wake(dev, true); + error = runtime ? platform_pci_run_wake(dev, true) : + platform_pci_sleep_wake(dev, true); if (ret) ret = error; if (!ret) dev->wakeup_prepared = true; } else { - platform_pci_sleep_wake(dev, false); + if (runtime) + platform_pci_run_wake(dev, false); + else + platform_pci_sleep_wake(dev, false); pci_pme_active(dev, false); dev->wakeup_prepared = false; } return ret; } +EXPORT_SYMBOL(__pci_enable_wake); /** * pci_wake_from_d3 - enable/disable device to wake up from D3_hot or D3_cold @@ -1394,6 +1515,66 @@ int pci_back_from_sleep(struct pci_dev *dev) } /** + * pci_finish_runtime_suspend - Carry out PCI-specific part of runtime suspend. + * @dev: PCI device being suspended. + * + * Prepare @dev to generate wake-up events at run time and put it into a low + * power state. + */ +int pci_finish_runtime_suspend(struct pci_dev *dev) +{ + pci_power_t target_state = pci_target_state(dev); + int error; + + if (target_state == PCI_POWER_ERROR) + return -EIO; + + __pci_enable_wake(dev, target_state, true, pci_dev_run_wake(dev)); + + error = pci_set_power_state(dev, target_state); + + if (error) + __pci_enable_wake(dev, target_state, true, false); + + return error; +} + +/** + * pci_dev_run_wake - Check if device can generate run-time wake-up events. + * @dev: Device to check. + * + * Return true if the device itself is cabable of generating wake-up events + * (through the platform or using the native PCIe PME) or if the device supports + * PME and one of its upstream bridges can generate wake-up events. + */ +bool pci_dev_run_wake(struct pci_dev *dev) +{ + struct pci_bus *bus = dev->bus; + + if (device_run_wake(&dev->dev)) + return true; + + if (!dev->pme_support) + return false; + + while (bus->parent) { + struct pci_dev *bridge = bus->self; + + if (device_run_wake(&bridge->dev)) + return true; + + bus = bus->parent; + } + + /* We have reached the root bus. */ + if (bus->bridge) + return device_run_wake(bus->bridge); + + return false; +} +EXPORT_SYMBOL_GPL(pci_dev_run_wake); + +/** * pci_pm_init - Initialize PM functions of given PCI device * @dev: PCI device to handle. */ @@ -1402,7 +1583,10 @@ void pci_pm_init(struct pci_dev *dev) int pm; u16 pmc; + pm_runtime_forbid(&dev->dev); + device_enable_async_suspend(&dev->dev); dev->wakeup_prepared = false; + dev->pm_cap = 0; /* find PCI PM capability in list */ @@ -2114,35 +2298,6 @@ void pci_msi_off(struct pci_dev *dev) } } -#ifndef HAVE_ARCH_PCI_SET_DMA_MASK -/* - * These can be overridden by arch-specific implementations - */ -int -pci_set_dma_mask(struct pci_dev *dev, u64 mask) -{ - if (!pci_dma_supported(dev, mask)) - return -EIO; - - dev->dma_mask = mask; - dev_dbg(&dev->dev, "using %dbit DMA mask\n", fls64(mask)); - - return 0; -} - -int -pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask) -{ - if (!pci_dma_supported(dev, mask)) - return -EIO; - - dev->dev.coherent_dma_mask = mask; - dev_dbg(&dev->dev, "using %dbit consistent DMA mask\n", fls64(mask)); - - return 0; -} -#endif - #ifndef HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_SIZE int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size) { @@ -2304,7 +2459,7 @@ static int pci_dev_reset(struct pci_dev *dev, int probe) if (!probe) { pci_block_user_cfg_access(dev); /* block PM suspend, driver probe, etc. */ - down(&dev->dev.sem); + device_lock(&dev->dev); } rc = pci_dev_specific_reset(dev, probe); @@ -2326,7 +2481,7 @@ static int pci_dev_reset(struct pci_dev *dev, int probe) rc = pci_parent_bus_reset(dev, probe); done: if (!probe) { - up(&dev->dev.sem); + device_unlock(&dev->dev); pci_unblock_user_cfg_access(dev); } @@ -2615,6 +2770,23 @@ int pci_resource_bar(struct pci_dev *dev, int resno, enum pci_bar_type *type) return 0; } +/* Some architectures require additional programming to enable VGA */ +static arch_set_vga_state_t arch_set_vga_state; + +void __init pci_register_set_vga_state(arch_set_vga_state_t func) +{ + arch_set_vga_state = func; /* NULL disables */ +} + +static int pci_set_vga_state_arch(struct pci_dev *dev, bool decode, + unsigned int command_bits, bool change_bridge) +{ + if (arch_set_vga_state) + return arch_set_vga_state(dev, decode, command_bits, + change_bridge); + return 0; +} + /** * pci_set_vga_state - set VGA decode state on device and parents if requested * @dev: the PCI device @@ -2628,9 +2800,15 @@ int pci_set_vga_state(struct pci_dev *dev, bool decode, struct pci_bus *bus; struct pci_dev *bridge; u16 cmd; + int rc; WARN_ON(command_bits & ~(PCI_COMMAND_IO|PCI_COMMAND_MEMORY)); + /* ARCH specific VGA enables */ + rc = pci_set_vga_state_arch(dev, decode, command_bits, change_bridge); + if (rc) + return rc; + pci_read_config_word(dev, PCI_COMMAND, &cmd); if (decode == true) cmd |= command_bits; @@ -2845,6 +3023,7 @@ EXPORT_SYMBOL(pcim_pin_device); EXPORT_SYMBOL(pci_disable_device); EXPORT_SYMBOL(pci_find_capability); EXPORT_SYMBOL(pci_bus_find_capability); +EXPORT_SYMBOL(pci_register_set_vga_state); EXPORT_SYMBOL(pci_release_regions); EXPORT_SYMBOL(pci_request_regions); EXPORT_SYMBOL(pci_request_regions_exclusive); @@ -2860,8 +3039,6 @@ EXPORT_SYMBOL(pci_set_mwi); EXPORT_SYMBOL(pci_try_set_mwi); EXPORT_SYMBOL(pci_clear_mwi); EXPORT_SYMBOL_GPL(pci_intx); -EXPORT_SYMBOL(pci_set_dma_mask); -EXPORT_SYMBOL(pci_set_consistent_dma_mask); EXPORT_SYMBOL(pci_assign_resource); EXPORT_SYMBOL(pci_find_parent_resource); EXPORT_SYMBOL(pci_select_bars); @@ -2871,10 +3048,8 @@ EXPORT_SYMBOL(pci_save_state); EXPORT_SYMBOL(pci_restore_state); EXPORT_SYMBOL(pci_pme_capable); EXPORT_SYMBOL(pci_pme_active); -EXPORT_SYMBOL(pci_enable_wake); EXPORT_SYMBOL(pci_wake_from_d3); EXPORT_SYMBOL(pci_target_state); EXPORT_SYMBOL(pci_prepare_to_sleep); EXPORT_SYMBOL(pci_back_from_sleep); EXPORT_SYMBOL_GPL(pci_set_pcie_reset_state); - diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index fbd0e3adbca3..4eb10f48d270 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -35,6 +35,10 @@ int pci_probe_reset_function(struct pci_dev *dev); * * @sleep_wake: enables/disables the system wake up capability of given device * + * @run_wake: enables/disables the platform to generate run-time wake-up events + * for given device (the device's wake-up capability has to be + * enabled by @sleep_wake for this feature to work) + * * If given platform is generally capable of power managing PCI devices, all of * these callbacks are mandatory. */ @@ -44,11 +48,16 @@ struct pci_platform_pm_ops { pci_power_t (*choose_state)(struct pci_dev *dev); bool (*can_wakeup)(struct pci_dev *dev); int (*sleep_wake)(struct pci_dev *dev, bool enable); + int (*run_wake)(struct pci_dev *dev, bool enable); }; extern int pci_set_platform_pm(struct pci_platform_pm_ops *ops); extern void pci_update_current_state(struct pci_dev *dev, pci_power_t state); extern void pci_disable_enabled_device(struct pci_dev *dev); +extern bool pci_check_pme_status(struct pci_dev *dev); +extern int pci_finish_runtime_suspend(struct pci_dev *dev); +extern int __pci_pme_wakeup(struct pci_dev *dev, void *ign); +extern void pci_pme_wakeup_bus(struct pci_bus *bus); extern void pci_pm_init(struct pci_dev *dev); extern void platform_pci_wakeup_init(struct pci_dev *dev); extern void pci_allocate_cap_save_buffers(struct pci_dev *dev); @@ -319,6 +328,13 @@ struct pci_dev_reset_methods { int (*reset)(struct pci_dev *dev, int probe); }; +#ifdef CONFIG_PCI_QUIRKS extern int pci_dev_specific_reset(struct pci_dev *dev, int probe); +#else +static inline int pci_dev_specific_reset(struct pci_dev *dev, int probe) +{ + return -ENOTTY; +} +#endif #endif /* DRIVERS_PCI_H */ diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig index 5a0c6ad53f8e..b8b494b3e0d0 100644 --- a/drivers/pci/pcie/Kconfig +++ b/drivers/pci/pcie/Kconfig @@ -46,3 +46,7 @@ config PCIEASPM_DEBUG help This enables PCI Express ASPM debug support. It will add per-device interface to control ASPM. + +config PCIE_PME + def_bool y + depends on PCIEPORTBUS && PM_RUNTIME && EXPERIMENTAL && ACPI diff --git a/drivers/pci/pcie/Makefile b/drivers/pci/pcie/Makefile index 11f6bb1eae24..ea654545e7c4 100644 --- a/drivers/pci/pcie/Makefile +++ b/drivers/pci/pcie/Makefile @@ -11,3 +11,5 @@ obj-$(CONFIG_PCIEPORTBUS) += pcieportdrv.o # Build PCI Express AER if needed obj-$(CONFIG_PCIEAER) += aer/ + +obj-$(CONFIG_PCIE_PME) += pme/ diff --git a/drivers/pci/pcie/pme/Makefile b/drivers/pci/pcie/pme/Makefile new file mode 100644 index 000000000000..8b9238053080 --- /dev/null +++ b/drivers/pci/pcie/pme/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for PCI-Express Root Port PME signaling driver +# + +obj-$(CONFIG_PCIE_PME) += pmedriver.o + +pmedriver-objs := pcie_pme.o +pmedriver-$(CONFIG_ACPI) += pcie_pme_acpi.o diff --git a/drivers/pci/pcie/pme/pcie_pme.c b/drivers/pci/pcie/pme/pcie_pme.c new file mode 100644 index 000000000000..7b3cbff547ee --- /dev/null +++ b/drivers/pci/pcie/pme/pcie_pme.c @@ -0,0 +1,505 @@ +/* + * PCIe Native PME support + * + * Copyright (C) 2007 - 2009 Intel Corp + * Copyright (C) 2007 - 2009 Shaohua Li <shaohua.li@intel.com> + * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License V2. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/pcieport_if.h> +#include <linux/acpi.h> +#include <linux/pci-acpi.h> +#include <linux/pm_runtime.h> + +#include "../../pci.h" +#include "pcie_pme.h" + +#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */ +#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */ + +/* + * If set, this switch will prevent the PCIe root port PME service driver from + * being registered. Consequently, the interrupt-based PCIe PME signaling will + * not be used by any PCIe root ports in that case. + */ +static bool pcie_pme_disabled; + +/* + * The PCI Express Base Specification 2.0, Section 6.1.8, states the following: + * "In order to maintain compatibility with non-PCI Express-aware system + * software, system power management logic must be configured by firmware to use + * the legacy mechanism of signaling PME by default. PCI Express-aware system + * software must notify the firmware prior to enabling native, interrupt-based + * PME signaling." However, if the platform doesn't provide us with a suitable + * notification mechanism or the notification fails, it is not clear whether or + * not we are supposed to use the interrupt-based PCIe PME signaling. The + * switch below can be used to indicate the desired behaviour. When set, it + * will make the kernel use the interrupt-based PCIe PME signaling regardless of + * the platform notification status, although the kernel will attempt to notify + * the platform anyway. When unset, it will prevent the kernel from using the + * the interrupt-based PCIe PME signaling if the platform notification fails, + * which is the default. + */ +static bool pcie_pme_force_enable; + +/* + * If this switch is set, MSI will not be used for PCIe PME signaling. This + * causes the PCIe port driver to use INTx interrupts only, but it turns out + * that using MSI for PCIe PME signaling doesn't play well with PCIe PME-based + * wake-up from system sleep states. + */ +bool pcie_pme_msi_disabled; + +static int __init pcie_pme_setup(char *str) +{ + if (!strcmp(str, "off")) + pcie_pme_disabled = true; + else if (!strcmp(str, "force")) + pcie_pme_force_enable = true; + else if (!strcmp(str, "nomsi")) + pcie_pme_msi_disabled = true; + return 1; +} +__setup("pcie_pme=", pcie_pme_setup); + +/** + * pcie_pme_platform_setup - Ensure that the kernel controls the PCIe PME. + * @srv: PCIe PME root port service to use for carrying out the check. + * + * Notify the platform that the native PCIe PME is going to be used and return + * 'true' if the control of the PCIe PME registers has been acquired from the + * platform. + */ +static bool pcie_pme_platform_setup(struct pcie_device *srv) +{ + if (!pcie_pme_platform_notify(srv)) + return true; + return pcie_pme_force_enable; +} + +struct pcie_pme_service_data { + spinlock_t lock; + struct pcie_device *srv; + struct work_struct work; + bool noirq; /* Don't enable the PME interrupt used by this service. */ +}; + +/** + * pcie_pme_interrupt_enable - Enable/disable PCIe PME interrupt generation. + * @dev: PCIe root port or event collector. + * @enable: Enable or disable the interrupt. + */ +static void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable) +{ + int rtctl_pos; + u16 rtctl; + + rtctl_pos = pci_pcie_cap(dev) + PCI_EXP_RTCTL; + + pci_read_config_word(dev, rtctl_pos, &rtctl); + if (enable) + rtctl |= PCI_EXP_RTCTL_PMEIE; + else + rtctl &= ~PCI_EXP_RTCTL_PMEIE; + pci_write_config_word(dev, rtctl_pos, rtctl); +} + +/** + * pcie_pme_clear_status - Clear root port PME interrupt status. + * @dev: PCIe root port or event collector. + */ +static void pcie_pme_clear_status(struct pci_dev *dev) +{ + int rtsta_pos; + u32 rtsta; + + rtsta_pos = pci_pcie_cap(dev) + PCI_EXP_RTSTA; + + pci_read_config_dword(dev, rtsta_pos, &rtsta); + rtsta |= PCI_EXP_RTSTA_PME; + pci_write_config_dword(dev, rtsta_pos, rtsta); +} + +/** + * pcie_pme_walk_bus - Scan a PCI bus for devices asserting PME#. + * @bus: PCI bus to scan. + * + * Scan given PCI bus and all buses under it for devices asserting PME#. + */ +static bool pcie_pme_walk_bus(struct pci_bus *bus) +{ + struct pci_dev *dev; + bool ret = false; + + list_for_each_entry(dev, &bus->devices, bus_list) { + /* Skip PCIe devices in case we started from a root port. */ + if (!pci_is_pcie(dev) && pci_check_pme_status(dev)) { + pm_request_resume(&dev->dev); + ret = true; + } + + if (dev->subordinate && pcie_pme_walk_bus(dev->subordinate)) + ret = true; + } + + return ret; +} + +/** + * pcie_pme_from_pci_bridge - Check if PCIe-PCI bridge generated a PME. + * @bus: Secondary bus of the bridge. + * @devfn: Device/function number to check. + * + * PME from PCI devices under a PCIe-PCI bridge may be converted to an in-band + * PCIe PME message. In such that case the bridge should use the Requester ID + * of device/function number 0 on its secondary bus. + */ +static bool pcie_pme_from_pci_bridge(struct pci_bus *bus, u8 devfn) +{ + struct pci_dev *dev; + bool found = false; + + if (devfn) + return false; + + dev = pci_dev_get(bus->self); + if (!dev) + return false; + + if (pci_is_pcie(dev) && dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) { + down_read(&pci_bus_sem); + if (pcie_pme_walk_bus(bus)) + found = true; + up_read(&pci_bus_sem); + } + + pci_dev_put(dev); + return found; +} + +/** + * pcie_pme_handle_request - Find device that generated PME and handle it. + * @port: Root port or event collector that generated the PME interrupt. + * @req_id: PCIe Requester ID of the device that generated the PME. + */ +static void pcie_pme_handle_request(struct pci_dev *port, u16 req_id) +{ + u8 busnr = req_id >> 8, devfn = req_id & 0xff; + struct pci_bus *bus; + struct pci_dev *dev; + bool found = false; + + /* First, check if the PME is from the root port itself. */ + if (port->devfn == devfn && port->bus->number == busnr) { + if (pci_check_pme_status(port)) { + pm_request_resume(&port->dev); + found = true; + } else { + /* + * Apparently, the root port generated the PME on behalf + * of a non-PCIe device downstream. If this is done by + * a root port, the Requester ID field in its status + * register may contain either the root port's, or the + * source device's information (PCI Express Base + * Specification, Rev. 2.0, Section 6.1.9). + */ + down_read(&pci_bus_sem); + found = pcie_pme_walk_bus(port->subordinate); + up_read(&pci_bus_sem); + } + goto out; + } + + /* Second, find the bus the source device is on. */ + bus = pci_find_bus(pci_domain_nr(port->bus), busnr); + if (!bus) + goto out; + + /* Next, check if the PME is from a PCIe-PCI bridge. */ + found = pcie_pme_from_pci_bridge(bus, devfn); + if (found) + goto out; + + /* Finally, try to find the PME source on the bus. */ + down_read(&pci_bus_sem); + list_for_each_entry(dev, &bus->devices, bus_list) { + pci_dev_get(dev); + if (dev->devfn == devfn) { + found = true; + break; + } + pci_dev_put(dev); + } + up_read(&pci_bus_sem); + + if (found) { + /* The device is there, but we have to check its PME status. */ + found = pci_check_pme_status(dev); + if (found) + pm_request_resume(&dev->dev); + pci_dev_put(dev); + } else if (devfn) { + /* + * The device is not there, but we can still try to recover by + * assuming that the PME was reported by a PCIe-PCI bridge that + * used devfn different from zero. + */ + dev_dbg(&port->dev, "PME interrupt generated for " + "non-existent device %02x:%02x.%d\n", + busnr, PCI_SLOT(devfn), PCI_FUNC(devfn)); + found = pcie_pme_from_pci_bridge(bus, 0); + } + + out: + if (!found) + dev_dbg(&port->dev, "Spurious native PME interrupt!\n"); +} + +/** + * pcie_pme_work_fn - Work handler for PCIe PME interrupt. + * @work: Work structure giving access to service data. + */ +static void pcie_pme_work_fn(struct work_struct *work) +{ + struct pcie_pme_service_data *data = + container_of(work, struct pcie_pme_service_data, work); + struct pci_dev *port = data->srv->port; + int rtsta_pos; + u32 rtsta; + + rtsta_pos = pci_pcie_cap(port) + PCI_EXP_RTSTA; + + spin_lock_irq(&data->lock); + + for (;;) { + if (data->noirq) + break; + + pci_read_config_dword(port, rtsta_pos, &rtsta); + if (rtsta & PCI_EXP_RTSTA_PME) { + /* + * Clear PME status of the port. If there are other + * pending PMEs, the status will be set again. + */ + pcie_pme_clear_status(port); + + spin_unlock_irq(&data->lock); + pcie_pme_handle_request(port, rtsta & 0xffff); + spin_lock_irq(&data->lock); + + continue; + } + + /* No need to loop if there are no more PMEs pending. */ + if (!(rtsta & PCI_EXP_RTSTA_PENDING)) + break; + + spin_unlock_irq(&data->lock); + cpu_relax(); + spin_lock_irq(&data->lock); + } + + if (!data->noirq) + pcie_pme_interrupt_enable(port, true); + + spin_unlock_irq(&data->lock); +} + +/** + * pcie_pme_irq - Interrupt handler for PCIe root port PME interrupt. + * @irq: Interrupt vector. + * @context: Interrupt context pointer. + */ +static irqreturn_t pcie_pme_irq(int irq, void *context) +{ + struct pci_dev *port; + struct pcie_pme_service_data *data; + int rtsta_pos; + u32 rtsta; + unsigned long flags; + + port = ((struct pcie_device *)context)->port; + data = get_service_data((struct pcie_device *)context); + + rtsta_pos = pci_pcie_cap(port) + PCI_EXP_RTSTA; + + spin_lock_irqsave(&data->lock, flags); + pci_read_config_dword(port, rtsta_pos, &rtsta); + + if (!(rtsta & PCI_EXP_RTSTA_PME)) { + spin_unlock_irqrestore(&data->lock, flags); + return IRQ_NONE; + } + + pcie_pme_interrupt_enable(port, false); + spin_unlock_irqrestore(&data->lock, flags); + + /* We don't use pm_wq, because it's freezable. */ + schedule_work(&data->work); + + return IRQ_HANDLED; +} + +/** + * pcie_pme_set_native - Set the PME interrupt flag for given device. + * @dev: PCI device to handle. + * @ign: Ignored. + */ +static int pcie_pme_set_native(struct pci_dev *dev, void *ign) +{ + dev_info(&dev->dev, "Signaling PME through PCIe PME interrupt\n"); + + device_set_run_wake(&dev->dev, true); + dev->pme_interrupt = true; + return 0; +} + +/** + * pcie_pme_mark_devices - Set the PME interrupt flag for devices below a port. + * @port: PCIe root port or event collector to handle. + * + * For each device below given root port, including the port itself (or for each + * root complex integrated endpoint if @port is a root complex event collector) + * set the flag indicating that it can signal run-time wake-up events via PCIe + * PME interrupts. + */ +static void pcie_pme_mark_devices(struct pci_dev *port) +{ + pcie_pme_set_native(port, NULL); + if (port->subordinate) { + pci_walk_bus(port->subordinate, pcie_pme_set_native, NULL); + } else { + struct pci_bus *bus = port->bus; + struct pci_dev *dev; + + /* Check if this is a root port event collector. */ + if (port->pcie_type != PCI_EXP_TYPE_RC_EC || !bus) + return; + + down_read(&pci_bus_sem); + list_for_each_entry(dev, &bus->devices, bus_list) + if (pci_is_pcie(dev) + && dev->pcie_type == PCI_EXP_TYPE_RC_END) + pcie_pme_set_native(dev, NULL); + up_read(&pci_bus_sem); + } +} + +/** + * pcie_pme_probe - Initialize PCIe PME service for given root port. + * @srv: PCIe service to initialize. + */ +static int pcie_pme_probe(struct pcie_device *srv) +{ + struct pci_dev *port; + struct pcie_pme_service_data *data; + int ret; + + if (!pcie_pme_platform_setup(srv)) + return -EACCES; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + spin_lock_init(&data->lock); + INIT_WORK(&data->work, pcie_pme_work_fn); + data->srv = srv; + set_service_data(srv, data); + + port = srv->port; + pcie_pme_interrupt_enable(port, false); + pcie_pme_clear_status(port); + + ret = request_irq(srv->irq, pcie_pme_irq, IRQF_SHARED, "PCIe PME", srv); + if (ret) { + kfree(data); + } else { + pcie_pme_mark_devices(port); + pcie_pme_interrupt_enable(port, true); + } + + return ret; +} + +/** + * pcie_pme_suspend - Suspend PCIe PME service device. + * @srv: PCIe service device to suspend. + */ +static int pcie_pme_suspend(struct pcie_device *srv) +{ + struct pcie_pme_service_data *data = get_service_data(srv); + struct pci_dev *port = srv->port; + + spin_lock_irq(&data->lock); + pcie_pme_interrupt_enable(port, false); + pcie_pme_clear_status(port); + data->noirq = true; + spin_unlock_irq(&data->lock); + + synchronize_irq(srv->irq); + + return 0; +} + +/** + * pcie_pme_resume - Resume PCIe PME service device. + * @srv - PCIe service device to resume. + */ +static int pcie_pme_resume(struct pcie_device *srv) +{ + struct pcie_pme_service_data *data = get_service_data(srv); + struct pci_dev *port = srv->port; + + spin_lock_irq(&data->lock); + data->noirq = false; + pcie_pme_clear_status(port); + pcie_pme_interrupt_enable(port, true); + spin_unlock_irq(&data->lock); + + return 0; +} + +/** + * pcie_pme_remove - Prepare PCIe PME service device for removal. + * @srv - PCIe service device to resume. + */ +static void pcie_pme_remove(struct pcie_device *srv) +{ + pcie_pme_suspend(srv); + free_irq(srv->irq, srv); + kfree(get_service_data(srv)); +} + +static struct pcie_port_service_driver pcie_pme_driver = { + .name = "pcie_pme", + .port_type = PCI_EXP_TYPE_ROOT_PORT, + .service = PCIE_PORT_SERVICE_PME, + + .probe = pcie_pme_probe, + .suspend = pcie_pme_suspend, + .resume = pcie_pme_resume, + .remove = pcie_pme_remove, +}; + +/** + * pcie_pme_service_init - Register the PCIe PME service driver. + */ +static int __init pcie_pme_service_init(void) +{ + return pcie_pme_disabled ? + -ENODEV : pcie_port_service_register(&pcie_pme_driver); +} + +module_init(pcie_pme_service_init); diff --git a/drivers/pci/pcie/pme/pcie_pme.h b/drivers/pci/pcie/pme/pcie_pme.h new file mode 100644 index 000000000000..b30d2b7c9775 --- /dev/null +++ b/drivers/pci/pcie/pme/pcie_pme.h @@ -0,0 +1,28 @@ +/* + * drivers/pci/pcie/pme/pcie_pme.h + * + * PCI Express Root Port PME signaling support + * + * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc. + */ + +#ifndef _PCIE_PME_H_ +#define _PCIE_PME_H_ + +struct pcie_device; + +#ifdef CONFIG_ACPI +extern int pcie_pme_acpi_setup(struct pcie_device *srv); + +static inline int pcie_pme_platform_notify(struct pcie_device *srv) +{ + return pcie_pme_acpi_setup(srv); +} +#else /* !CONFIG_ACPI */ +static inline int pcie_pme_platform_notify(struct pcie_device *srv) +{ + return 0; +} +#endif /* !CONFIG_ACPI */ + +#endif diff --git a/drivers/pci/pcie/pme/pcie_pme_acpi.c b/drivers/pci/pcie/pme/pcie_pme_acpi.c new file mode 100644 index 000000000000..83ab2287ae3f --- /dev/null +++ b/drivers/pci/pcie/pme/pcie_pme_acpi.c @@ -0,0 +1,54 @@ +/* + * PCIe Native PME support, ACPI-related part + * + * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License V2. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/acpi.h> +#include <linux/pci-acpi.h> +#include <linux/pcieport_if.h> + +/** + * pcie_pme_acpi_setup - Request the ACPI BIOS to release control over PCIe PME. + * @srv - PCIe PME service for a root port or event collector. + * + * Invoked when the PCIe bus type loads PCIe PME service driver. To avoid + * conflict with the BIOS PCIe support requires the BIOS to yield PCIe PME + * control to the kernel. + */ +int pcie_pme_acpi_setup(struct pcie_device *srv) +{ + acpi_status status = AE_NOT_FOUND; + struct pci_dev *port = srv->port; + acpi_handle handle; + int error = 0; + + if (acpi_pci_disabled) + return -ENOSYS; + + dev_info(&port->dev, "Requesting control of PCIe PME from ACPI BIOS\n"); + + handle = acpi_find_root_bridge_handle(port); + if (!handle) + return -EINVAL; + + status = acpi_pci_osc_control_set(handle, + OSC_PCI_EXPRESS_PME_CONTROL | + OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL); + if (ACPI_FAILURE(status)) { + dev_info(&port->dev, + "Failed to receive control of PCIe PME service: %s\n", + (status == AE_SUPPORT || status == AE_NOT_FOUND) ? + "no _OSC support" : "ACPI _OSC failed"); + error = -ENODEV; + } + + return error; +} diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h index aaeb9d21cba5..813a5c3427b6 100644 --- a/drivers/pci/pcie/portdrv.h +++ b/drivers/pci/pcie/portdrv.h @@ -30,4 +30,21 @@ extern void pcie_port_device_remove(struct pci_dev *dev); extern int __must_check pcie_port_bus_register(void); extern void pcie_port_bus_unregister(void); +#ifdef CONFIG_PCIE_PME +extern bool pcie_pme_msi_disabled; + +static inline void pcie_pme_disable_msi(void) +{ + pcie_pme_msi_disabled = true; +} + +static inline bool pcie_pme_no_msi(void) +{ + return pcie_pme_msi_disabled; +} +#else /* !CONFIG_PCIE_PME */ +static inline void pcie_pme_disable_msi(void) {} +static inline bool pcie_pme_no_msi(void) { return false; } +#endif /* !CONFIG_PCIE_PME */ + #endif /* _PORTDRV_H_ */ diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index b174188ac121..e73effbe402c 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -186,16 +186,24 @@ static int pcie_port_enable_msix(struct pci_dev *dev, int *vectors, int mask) */ static int init_service_irqs(struct pci_dev *dev, int *irqs, int mask) { - int i, irq; + int i, irq = -1; + + /* We have to use INTx if MSI cannot be used for PCIe PME. */ + if ((mask & PCIE_PORT_SERVICE_PME) && pcie_pme_no_msi()) { + if (dev->pin) + irq = dev->irq; + goto no_msi; + } /* Try to use MSI-X if supported */ if (!pcie_port_enable_msix(dev, irqs, mask)) return 0; + /* We're not going to use MSI-X, so try MSI and fall back to INTx */ - irq = -1; if (!pci_enable_msi(dev) || dev->pin) irq = dev->irq; + no_msi: for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++) irqs[i] = irq; irqs[PCIE_PORT_SERVICE_VC_SHIFT] = -1; @@ -277,6 +285,7 @@ static int pcie_device_init(struct pci_dev *pdev, int service, int irq) pci_name(pdev), get_descriptor_id(pdev->pcie_type, service)); device->parent = &pdev->dev; + device_enable_async_suspend(device); retval = device_register(device); if (retval) diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index 13c8972886e6..127e8f169d9c 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -15,6 +15,7 @@ #include <linux/slab.h> #include <linux/pcieport_if.h> #include <linux/aer.h> +#include <linux/dmi.h> #include "portdrv.h" #include "aer/aerdrv.h" @@ -273,10 +274,36 @@ static struct pci_driver pcie_portdriver = { .driver.pm = PCIE_PORTDRV_PM_OPS, }; +static int __init dmi_pcie_pme_disable_msi(const struct dmi_system_id *d) +{ + pr_notice("%s detected: will not use MSI for PCIe PME signaling\n", + d->ident); + pcie_pme_disable_msi(); + return 0; +} + +static struct dmi_system_id __initdata pcie_portdrv_dmi_table[] = { + /* + * Boxes that should not use MSI for PCIe PME signaling. + */ + { + .callback = dmi_pcie_pme_disable_msi, + .ident = "MSI Wind U-100", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, + "MICRO-STAR INTERNATIONAL CO., LTD"), + DMI_MATCH(DMI_PRODUCT_NAME, "U-100"), + }, + }, + {} +}; + static int __init pcie_portdrv_init(void) { int retval; + dmi_check_system(pcie_portdrv_dmi_table); + retval = pcie_port_bus_register(); if (retval) { printk(KERN_WARNING "PCIE: bus_register error: %d\n", retval); diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 446e4a94d7d3..2a943090a3b7 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -89,6 +89,7 @@ static void release_pcibus_dev(struct device *dev) if (pci_bus->bridge) put_device(pci_bus->bridge); + pci_bus_remove_resources(pci_bus); kfree(pci_bus); } @@ -281,26 +282,12 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom) } } -void __devinit pci_read_bridge_bases(struct pci_bus *child) +static void __devinit pci_read_bridge_io(struct pci_bus *child) { struct pci_dev *dev = child->self; u8 io_base_lo, io_limit_lo; - u16 mem_base_lo, mem_limit_lo; unsigned long base, limit; struct resource *res; - int i; - - if (pci_is_root_bus(child)) /* It's a host bus, nothing to read */ - return; - - dev_info(&dev->dev, "PCI bridge to [bus %02x-%02x]%s\n", - child->secondary, child->subordinate, - dev->transparent ? " (subtractive decode)": ""); - - if (dev->transparent) { - for(i = 3; i < PCI_BUS_NUM_RESOURCES; i++) - child->resource[i] = child->parent->resource[i - 3]; - } res = child->resource[0]; pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo); @@ -316,26 +303,50 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) limit |= (io_limit_hi << 16); } - if (base <= limit) { + if (base && base <= limit) { res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO; if (!res->start) res->start = base; if (!res->end) res->end = limit + 0xfff; dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res); + } else { + dev_printk(KERN_DEBUG, &dev->dev, + " bridge window [io %04lx - %04lx] reg reading\n", + base, limit); } +} + +static void __devinit pci_read_bridge_mmio(struct pci_bus *child) +{ + struct pci_dev *dev = child->self; + u16 mem_base_lo, mem_limit_lo; + unsigned long base, limit; + struct resource *res; res = child->resource[1]; pci_read_config_word(dev, PCI_MEMORY_BASE, &mem_base_lo); pci_read_config_word(dev, PCI_MEMORY_LIMIT, &mem_limit_lo); base = (mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16; limit = (mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16; - if (base <= limit) { + if (base && base <= limit) { res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM; res->start = base; res->end = limit + 0xfffff; dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res); + } else { + dev_printk(KERN_DEBUG, &dev->dev, + " bridge window [mem 0x%08lx - 0x%08lx] reg reading\n", + base, limit + 0xfffff); } +} + +static void __devinit pci_read_bridge_mmio_pref(struct pci_bus *child) +{ + struct pci_dev *dev = child->self; + u16 mem_base_lo, mem_limit_lo; + unsigned long base, limit; + struct resource *res; res = child->resource[2]; pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo); @@ -366,7 +377,7 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) #endif } } - if (base <= limit) { + if (base && base <= limit) { res->flags = (mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH; if (res->flags & PCI_PREF_RANGE_TYPE_64) @@ -374,6 +385,44 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) res->start = base; res->end = limit + 0xfffff; dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res); + } else { + dev_printk(KERN_DEBUG, &dev->dev, + " bridge window [mem 0x%08lx - %08lx pref] reg reading\n", + base, limit + 0xfffff); + } +} + +void __devinit pci_read_bridge_bases(struct pci_bus *child) +{ + struct pci_dev *dev = child->self; + struct resource *res; + int i; + + if (pci_is_root_bus(child)) /* It's a host bus, nothing to read */ + return; + + dev_info(&dev->dev, "PCI bridge to [bus %02x-%02x]%s\n", + child->secondary, child->subordinate, + dev->transparent ? " (subtractive decode)" : ""); + + pci_bus_remove_resources(child); + for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) + child->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i]; + + pci_read_bridge_io(child); + pci_read_bridge_mmio(child); + pci_read_bridge_mmio_pref(child); + + if (dev->transparent) { + pci_bus_for_each_resource(child->parent, res, i) { + if (res) { + pci_bus_add_resource(child, res, + PCI_SUBTRACTIVE_DECODE); + dev_printk(KERN_DEBUG, &dev->dev, + " bridge window %pR (subtractive decode)\n", + res); + } + } } } @@ -387,10 +436,147 @@ static struct pci_bus * pci_alloc_bus(void) INIT_LIST_HEAD(&b->children); INIT_LIST_HEAD(&b->devices); INIT_LIST_HEAD(&b->slots); + INIT_LIST_HEAD(&b->resources); + b->max_bus_speed = PCI_SPEED_UNKNOWN; + b->cur_bus_speed = PCI_SPEED_UNKNOWN; } return b; } +static unsigned char pcix_bus_speed[] = { + PCI_SPEED_UNKNOWN, /* 0 */ + PCI_SPEED_66MHz_PCIX, /* 1 */ + PCI_SPEED_100MHz_PCIX, /* 2 */ + PCI_SPEED_133MHz_PCIX, /* 3 */ + PCI_SPEED_UNKNOWN, /* 4 */ + PCI_SPEED_66MHz_PCIX_ECC, /* 5 */ + PCI_SPEED_100MHz_PCIX_ECC, /* 6 */ + PCI_SPEED_133MHz_PCIX_ECC, /* 7 */ + PCI_SPEED_UNKNOWN, /* 8 */ + PCI_SPEED_66MHz_PCIX_266, /* 9 */ + PCI_SPEED_100MHz_PCIX_266, /* A */ + PCI_SPEED_133MHz_PCIX_266, /* B */ + PCI_SPEED_UNKNOWN, /* C */ + PCI_SPEED_66MHz_PCIX_533, /* D */ + PCI_SPEED_100MHz_PCIX_533, /* E */ + PCI_SPEED_133MHz_PCIX_533 /* F */ +}; + +static unsigned char pcie_link_speed[] = { + PCI_SPEED_UNKNOWN, /* 0 */ + PCIE_SPEED_2_5GT, /* 1 */ + PCIE_SPEED_5_0GT, /* 2 */ + PCIE_SPEED_8_0GT, /* 3 */ + PCI_SPEED_UNKNOWN, /* 4 */ + PCI_SPEED_UNKNOWN, /* 5 */ + PCI_SPEED_UNKNOWN, /* 6 */ + PCI_SPEED_UNKNOWN, /* 7 */ + PCI_SPEED_UNKNOWN, /* 8 */ + PCI_SPEED_UNKNOWN, /* 9 */ + PCI_SPEED_UNKNOWN, /* A */ + PCI_SPEED_UNKNOWN, /* B */ + PCI_SPEED_UNKNOWN, /* C */ + PCI_SPEED_UNKNOWN, /* D */ + PCI_SPEED_UNKNOWN, /* E */ + PCI_SPEED_UNKNOWN /* F */ +}; + +void pcie_update_link_speed(struct pci_bus *bus, u16 linksta) +{ + bus->cur_bus_speed = pcie_link_speed[linksta & 0xf]; +} +EXPORT_SYMBOL_GPL(pcie_update_link_speed); + +static unsigned char agp_speeds[] = { + AGP_UNKNOWN, + AGP_1X, + AGP_2X, + AGP_4X, + AGP_8X +}; + +static enum pci_bus_speed agp_speed(int agp3, int agpstat) +{ + int index = 0; + + if (agpstat & 4) + index = 3; + else if (agpstat & 2) + index = 2; + else if (agpstat & 1) + index = 1; + else + goto out; + + if (agp3) { + index += 2; + if (index == 5) + index = 0; + } + + out: + return agp_speeds[index]; +} + + +static void pci_set_bus_speed(struct pci_bus *bus) +{ + struct pci_dev *bridge = bus->self; + int pos; + + pos = pci_find_capability(bridge, PCI_CAP_ID_AGP); + if (!pos) + pos = pci_find_capability(bridge, PCI_CAP_ID_AGP3); + if (pos) { + u32 agpstat, agpcmd; + + pci_read_config_dword(bridge, pos + PCI_AGP_STATUS, &agpstat); + bus->max_bus_speed = agp_speed(agpstat & 8, agpstat & 7); + + pci_read_config_dword(bridge, pos + PCI_AGP_COMMAND, &agpcmd); + bus->cur_bus_speed = agp_speed(agpstat & 8, agpcmd & 7); + } + + pos = pci_find_capability(bridge, PCI_CAP_ID_PCIX); + if (pos) { + u16 status; + enum pci_bus_speed max; + pci_read_config_word(bridge, pos + 2, &status); + + if (status & 0x8000) { + max = PCI_SPEED_133MHz_PCIX_533; + } else if (status & 0x4000) { + max = PCI_SPEED_133MHz_PCIX_266; + } else if (status & 0x0002) { + if (((status >> 12) & 0x3) == 2) { + max = PCI_SPEED_133MHz_PCIX_ECC; + } else { + max = PCI_SPEED_133MHz_PCIX; + } + } else { + max = PCI_SPEED_66MHz_PCIX; + } + + bus->max_bus_speed = max; + bus->cur_bus_speed = pcix_bus_speed[(status >> 6) & 0xf]; + + return; + } + + pos = pci_find_capability(bridge, PCI_CAP_ID_EXP); + if (pos) { + u32 linkcap; + u16 linksta; + + pci_read_config_dword(bridge, pos + PCI_EXP_LNKCAP, &linkcap); + bus->max_bus_speed = pcie_link_speed[linkcap & 0xf]; + + pci_read_config_word(bridge, pos + PCI_EXP_LNKSTA, &linksta); + pcie_update_link_speed(bus, linksta); + } +} + + static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent, struct pci_dev *bridge, int busnr) { @@ -430,6 +616,8 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent, child->self = bridge; child->bridge = get_device(&bridge->dev); + pci_set_bus_speed(child); + /* Set up default resource pointers and names.. */ for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) { child->resource[i] = &bridge->resource[PCI_BRIDGE_RESOURCES+i]; @@ -1081,6 +1269,45 @@ struct pci_dev *__ref pci_scan_single_device(struct pci_bus *bus, int devfn) } EXPORT_SYMBOL(pci_scan_single_device); +static unsigned next_ari_fn(struct pci_dev *dev, unsigned fn) +{ + u16 cap; + unsigned pos, next_fn; + + if (!dev) + return 0; + + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI); + if (!pos) + return 0; + pci_read_config_word(dev, pos + 4, &cap); + next_fn = cap >> 8; + if (next_fn <= fn) + return 0; + return next_fn; +} + +static unsigned next_trad_fn(struct pci_dev *dev, unsigned fn) +{ + return (fn + 1) % 8; +} + +static unsigned no_next_fn(struct pci_dev *dev, unsigned fn) +{ + return 0; +} + +static int only_one_child(struct pci_bus *bus) +{ + struct pci_dev *parent = bus->self; + if (!parent || !pci_is_pcie(parent)) + return 0; + if (parent->pcie_type == PCI_EXP_TYPE_ROOT_PORT || + parent->pcie_type == PCI_EXP_TYPE_DOWNSTREAM) + return 1; + return 0; +} + /** * pci_scan_slot - scan a PCI slot on a bus for devices. * @bus: PCI bus to scan @@ -1094,21 +1321,30 @@ EXPORT_SYMBOL(pci_scan_single_device); */ int pci_scan_slot(struct pci_bus *bus, int devfn) { - int fn, nr = 0; + unsigned fn, nr = 0; struct pci_dev *dev; + unsigned (*next_fn)(struct pci_dev *, unsigned) = no_next_fn; + + if (only_one_child(bus) && (devfn > 0)) + return 0; /* Already scanned the entire slot */ dev = pci_scan_single_device(bus, devfn); - if (dev && !dev->is_added) /* new device? */ + if (!dev) + return 0; + if (!dev->is_added) nr++; - if (dev && dev->multifunction) { - for (fn = 1; fn < 8; fn++) { - dev = pci_scan_single_device(bus, devfn + fn); - if (dev) { - if (!dev->is_added) - nr++; - dev->multifunction = 1; - } + if (pci_ari_enabled(bus)) + next_fn = next_ari_fn; + else if (dev->multifunction) + next_fn = next_trad_fn; + + for (fn = next_fn(dev, 0); fn > 0; fn = next_fn(dev, fn)) { + dev = pci_scan_single_device(bus, devfn + fn); + if (dev) { + if (!dev->is_added) + nr++; + dev->multifunction = 1; } } @@ -1200,6 +1436,7 @@ struct pci_bus * pci_create_bus(struct device *parent, if (error) goto dev_reg_err; b->bridge = get_device(dev); + device_enable_async_suspend(b->bridge); if (!parent) set_dev_node(b->bridge, pcibus_to_node(b)); diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index d58b94030ef3..81d19d5683ac 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -25,14 +25,9 @@ #include <linux/dmi.h> #include <linux/pci-aspm.h> #include <linux/ioport.h> +#include <asm/dma.h> /* isa_dma_bridge_buggy */ #include "pci.h" -int isa_dma_bridge_buggy; -EXPORT_SYMBOL(isa_dma_bridge_buggy); -int pci_pci_problems; -EXPORT_SYMBOL(pci_pci_problems); - -#ifdef CONFIG_PCI_QUIRKS /* * This quirk function disables memory decoding and releases memory resources * of the device specified by kernel's boot parameter 'pci=resource_alignment='. @@ -2534,9 +2529,95 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10e7, quirk_i82576_sriov); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10e8, quirk_i82576_sriov); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x150a, quirk_i82576_sriov); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x150d, quirk_i82576_sriov); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1518, quirk_i82576_sriov); #endif /* CONFIG_PCI_IOV */ +/* + * This is a quirk for the Ricoh MMC controller found as a part of + * some mulifunction chips. + + * This is very similiar and based on the ricoh_mmc driver written by + * Philip Langdale. Thank you for these magic sequences. + * + * These chips implement the four main memory card controllers (SD, MMC, MS, xD) + * and one or both of cardbus or firewire. + * + * It happens that they implement SD and MMC + * support as separate controllers (and PCI functions). The linux SDHCI + * driver supports MMC cards but the chip detects MMC cards in hardware + * and directs them to the MMC controller - so the SDHCI driver never sees + * them. + * + * To get around this, we must disable the useless MMC controller. + * At that point, the SDHCI controller will start seeing them + * It seems to be the case that the relevant PCI registers to deactivate the + * MMC controller live on PCI function 0, which might be the cardbus controller + * or the firewire controller, depending on the particular chip in question + * + * This has to be done early, because as soon as we disable the MMC controller + * other pci functions shift up one level, e.g. function #2 becomes function + * #1, and this will confuse the pci core. + */ + +#ifdef CONFIG_MMC_RICOH_MMC +static void ricoh_mmc_fixup_rl5c476(struct pci_dev *dev) +{ + /* disable via cardbus interface */ + u8 write_enable; + u8 write_target; + u8 disable; + + /* disable must be done via function #0 */ + if (PCI_FUNC(dev->devfn)) + return; + + pci_read_config_byte(dev, 0xB7, &disable); + if (disable & 0x02) + return; + + pci_read_config_byte(dev, 0x8E, &write_enable); + pci_write_config_byte(dev, 0x8E, 0xAA); + pci_read_config_byte(dev, 0x8D, &write_target); + pci_write_config_byte(dev, 0x8D, 0xB7); + pci_write_config_byte(dev, 0xB7, disable | 0x02); + pci_write_config_byte(dev, 0x8E, write_enable); + pci_write_config_byte(dev, 0x8D, write_target); + + dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via cardbus function)\n"); + dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n"); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476); + +static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev) +{ + /* disable via firewire interface */ + u8 write_enable; + u8 disable; + + /* disable must be done via function #0 */ + if (PCI_FUNC(dev->devfn)) + return; + + pci_read_config_byte(dev, 0xCB, &disable); + + if (disable & 0x02) + return; + + pci_read_config_byte(dev, 0xCA, &write_enable); + pci_write_config_byte(dev, 0xCA, 0x57); + pci_write_config_byte(dev, 0xCB, disable | 0x02); + pci_write_config_byte(dev, 0xCA, write_enable); + + dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n"); + dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n"); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); +#endif /*CONFIG_MMC_RICOH_MMC*/ + + static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end) { @@ -2612,6 +2693,7 @@ void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) } pci_do_fixups(dev, start, end); } +EXPORT_SYMBOL(pci_fixup_device); static int __init pci_apply_final_quirks(void) { @@ -2723,9 +2805,3 @@ int pci_dev_specific_reset(struct pci_dev *dev, int probe) return -ENOTTY; } - -#else -void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) {} -int pci_dev_specific_reset(struct pci_dev *dev, int probe) { return -ENOTTY; } -#endif -EXPORT_SYMBOL(pci_fixup_device); diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index c48cd377b3f5..4fe36d2e1049 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -27,37 +27,91 @@ #include <linux/slab.h> #include "pci.h" -static void pbus_assign_resources_sorted(const struct pci_bus *bus) -{ - struct pci_dev *dev; +struct resource_list_x { + struct resource_list_x *next; struct resource *res; - struct resource_list head, *list, *tmp; - int idx; + struct pci_dev *dev; + resource_size_t start; + resource_size_t end; + unsigned long flags; +}; - head.next = NULL; - list_for_each_entry(dev, &bus->devices, bus_list) { - u16 class = dev->class >> 8; +static void add_to_failed_list(struct resource_list_x *head, + struct pci_dev *dev, struct resource *res) +{ + struct resource_list_x *list = head; + struct resource_list_x *ln = list->next; + struct resource_list_x *tmp; - /* Don't touch classless devices or host bridges or ioapics. */ - if (class == PCI_CLASS_NOT_DEFINED || - class == PCI_CLASS_BRIDGE_HOST) - continue; + tmp = kmalloc(sizeof(*tmp), GFP_KERNEL); + if (!tmp) { + pr_warning("add_to_failed_list: kmalloc() failed!\n"); + return; + } - /* Don't touch ioapic devices already enabled by firmware */ - if (class == PCI_CLASS_SYSTEM_PIC) { - u16 command; - pci_read_config_word(dev, PCI_COMMAND, &command); - if (command & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) - continue; - } + tmp->next = ln; + tmp->res = res; + tmp->dev = dev; + tmp->start = res->start; + tmp->end = res->end; + tmp->flags = res->flags; + list->next = tmp; +} + +static void free_failed_list(struct resource_list_x *head) +{ + struct resource_list_x *list, *tmp; - pdev_sort_resources(dev, &head); + for (list = head->next; list;) { + tmp = list; + list = list->next; + kfree(tmp); } - for (list = head.next; list;) { + head->next = NULL; +} + +static void __dev_sort_resources(struct pci_dev *dev, + struct resource_list *head) +{ + u16 class = dev->class >> 8; + + /* Don't touch classless devices or host bridges or ioapics. */ + if (class == PCI_CLASS_NOT_DEFINED || class == PCI_CLASS_BRIDGE_HOST) + return; + + /* Don't touch ioapic devices already enabled by firmware */ + if (class == PCI_CLASS_SYSTEM_PIC) { + u16 command; + pci_read_config_word(dev, PCI_COMMAND, &command); + if (command & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) + return; + } + + pdev_sort_resources(dev, head); +} + +static void __assign_resources_sorted(struct resource_list *head, + struct resource_list_x *fail_head) +{ + struct resource *res; + struct resource_list *list, *tmp; + int idx; + + for (list = head->next; list;) { res = list->res; idx = res - &list->dev->resource[0]; + if (pci_assign_resource(list->dev, idx)) { + if (fail_head && !pci_is_root_bus(list->dev->bus)) { + /* + * if the failed res is for ROM BAR, and it will + * be enabled later, don't add it to the list + */ + if (!((idx == PCI_ROM_RESOURCE) && + (!(res->flags & IORESOURCE_ROM_ENABLE)))) + add_to_failed_list(fail_head, list->dev, res); + } res->start = 0; res->end = 0; res->flags = 0; @@ -68,6 +122,30 @@ static void pbus_assign_resources_sorted(const struct pci_bus *bus) } } +static void pdev_assign_resources_sorted(struct pci_dev *dev, + struct resource_list_x *fail_head) +{ + struct resource_list head; + + head.next = NULL; + __dev_sort_resources(dev, &head); + __assign_resources_sorted(&head, fail_head); + +} + +static void pbus_assign_resources_sorted(const struct pci_bus *bus, + struct resource_list_x *fail_head) +{ + struct pci_dev *dev; + struct resource_list head; + + head.next = NULL; + list_for_each_entry(dev, &bus->devices, bus_list) + __dev_sort_resources(dev, &head); + + __assign_resources_sorted(&head, fail_head); +} + void pci_setup_cardbus(struct pci_bus *bus) { struct pci_dev *bridge = bus->self; @@ -134,18 +212,12 @@ EXPORT_SYMBOL(pci_setup_cardbus); config space writes, so it's quite possible that an I/O window of the bridge will have some undesirable address (e.g. 0) after the first write. Ditto 64-bit prefetchable MMIO. */ -static void pci_setup_bridge(struct pci_bus *bus) +static void pci_setup_bridge_io(struct pci_bus *bus) { struct pci_dev *bridge = bus->self; struct resource *res; struct pci_bus_region region; - u32 l, bu, lu, io_upper16; - - if (pci_is_enabled(bridge)) - return; - - dev_info(&bridge->dev, "PCI bridge to [bus %02x-%02x]\n", - bus->secondary, bus->subordinate); + u32 l, io_upper16; /* Set up the top and bottom of the PCI I/O segment for this bus. */ res = bus->resource[0]; @@ -158,8 +230,7 @@ static void pci_setup_bridge(struct pci_bus *bus) /* Set up upper 16 bits of I/O base/limit. */ io_upper16 = (region.end & 0xffff0000) | (region.start >> 16); dev_info(&bridge->dev, " bridge window %pR\n", res); - } - else { + } else { /* Clear upper 16 bits of I/O base/limit. */ io_upper16 = 0; l = 0x00f0; @@ -171,21 +242,35 @@ static void pci_setup_bridge(struct pci_bus *bus) pci_write_config_dword(bridge, PCI_IO_BASE, l); /* Update upper 16 bits of I/O base/limit. */ pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, io_upper16); +} + +static void pci_setup_bridge_mmio(struct pci_bus *bus) +{ + struct pci_dev *bridge = bus->self; + struct resource *res; + struct pci_bus_region region; + u32 l; - /* Set up the top and bottom of the PCI Memory segment - for this bus. */ + /* Set up the top and bottom of the PCI Memory segment for this bus. */ res = bus->resource[1]; pcibios_resource_to_bus(bridge, ®ion, res); if (res->flags & IORESOURCE_MEM) { l = (region.start >> 16) & 0xfff0; l |= region.end & 0xfff00000; dev_info(&bridge->dev, " bridge window %pR\n", res); - } - else { + } else { l = 0x0000fff0; dev_info(&bridge->dev, " bridge window [mem disabled]\n"); } pci_write_config_dword(bridge, PCI_MEMORY_BASE, l); +} + +static void pci_setup_bridge_mmio_pref(struct pci_bus *bus) +{ + struct pci_dev *bridge = bus->self; + struct resource *res; + struct pci_bus_region region; + u32 l, bu, lu; /* Clear out the upper 32 bits of PREF limit. If PCI_PREF_BASE_UPPER32 was non-zero, this temporarily @@ -204,8 +289,7 @@ static void pci_setup_bridge(struct pci_bus *bus) lu = upper_32_bits(region.end); } dev_info(&bridge->dev, " bridge window %pR\n", res); - } - else { + } else { l = 0x0000fff0; dev_info(&bridge->dev, " bridge window [mem pref disabled]\n"); } @@ -214,10 +298,35 @@ static void pci_setup_bridge(struct pci_bus *bus) /* Set the upper 32 bits of PREF base & limit. */ pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, bu); pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, lu); +} + +static void __pci_setup_bridge(struct pci_bus *bus, unsigned long type) +{ + struct pci_dev *bridge = bus->self; + + dev_info(&bridge->dev, "PCI bridge to [bus %02x-%02x]\n", + bus->secondary, bus->subordinate); + + if (type & IORESOURCE_IO) + pci_setup_bridge_io(bus); + + if (type & IORESOURCE_MEM) + pci_setup_bridge_mmio(bus); + + if (type & IORESOURCE_PREFETCH) + pci_setup_bridge_mmio_pref(bus); pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, bus->bridge_ctl); } +static void pci_setup_bridge(struct pci_bus *bus) +{ + unsigned long type = IORESOURCE_IO | IORESOURCE_MEM | + IORESOURCE_PREFETCH; + + __pci_setup_bridge(bus, type); +} + /* Check whether the bridge supports optional I/O and prefetchable memory ranges. If not, the respective base/limit registers must be read-only and read as 0. */ @@ -253,8 +362,11 @@ static void pci_bridge_check_ranges(struct pci_bus *bus) } if (pmem) { b_res[2].flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH; - if ((pmem & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) + if ((pmem & PCI_PREF_RANGE_TYPE_MASK) == + PCI_PREF_RANGE_TYPE_64) { b_res[2].flags |= IORESOURCE_MEM_64; + b_res[2].flags |= PCI_PREF_RANGE_TYPE_64; + } } /* double check if bridge does support 64 bit pref */ @@ -283,8 +395,7 @@ static struct resource *find_free_bus_resource(struct pci_bus *bus, unsigned lon unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH; - for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { - r = bus->resource[i]; + pci_bus_for_each_resource(bus, r, i) { if (r == &ioport_resource || r == &iomem_resource) continue; if (r && (r->flags & type_mask) == type && !r->parent) @@ -301,7 +412,7 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size) { struct pci_dev *dev; struct resource *b_res = find_free_bus_resource(bus, IORESOURCE_IO); - unsigned long size = 0, size1 = 0; + unsigned long size = 0, size1 = 0, old_size; if (!b_res) return; @@ -326,12 +437,17 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size) } if (size < min_size) size = min_size; + old_size = resource_size(b_res); + if (old_size == 1) + old_size = 0; /* To be fixed in 2.5: we should have sort of HAVE_ISA flag in the struct pci_bus. */ #if defined(CONFIG_ISA) || defined(CONFIG_EISA) size = (size & 0xff) + ((size & ~0xffUL) << 2); #endif size = ALIGN(size + size1, 4096); + if (size < old_size) + size = old_size; if (!size) { if (b_res->start || b_res->end) dev_info(&bus->self->dev, "disabling bridge window " @@ -352,7 +468,7 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, unsigned long type, resource_size_t min_size) { struct pci_dev *dev; - resource_size_t min_align, align, size; + resource_size_t min_align, align, size, old_size; resource_size_t aligns[12]; /* Alignments from 1Mb to 2Gb */ int order, max_order; struct resource *b_res = find_free_bus_resource(bus, type); @@ -402,6 +518,11 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, } if (size < min_size) size = min_size; + old_size = resource_size(b_res); + if (old_size == 1) + old_size = 0; + if (size < old_size) + size = old_size; align = 0; min_align = 0; @@ -538,23 +659,25 @@ void __ref pci_bus_size_bridges(struct pci_bus *bus) } EXPORT_SYMBOL(pci_bus_size_bridges); -void __ref pci_bus_assign_resources(const struct pci_bus *bus) +static void __ref __pci_bus_assign_resources(const struct pci_bus *bus, + struct resource_list_x *fail_head) { struct pci_bus *b; struct pci_dev *dev; - pbus_assign_resources_sorted(bus); + pbus_assign_resources_sorted(bus, fail_head); list_for_each_entry(dev, &bus->devices, bus_list) { b = dev->subordinate; if (!b) continue; - pci_bus_assign_resources(b); + __pci_bus_assign_resources(b, fail_head); switch (dev->class >> 8) { case PCI_CLASS_BRIDGE_PCI: - pci_setup_bridge(b); + if (!pci_is_enabled(dev)) + pci_setup_bridge(b); break; case PCI_CLASS_BRIDGE_CARDBUS: @@ -568,15 +691,130 @@ void __ref pci_bus_assign_resources(const struct pci_bus *bus) } } } + +void __ref pci_bus_assign_resources(const struct pci_bus *bus) +{ + __pci_bus_assign_resources(bus, NULL); +} EXPORT_SYMBOL(pci_bus_assign_resources); +static void __ref __pci_bridge_assign_resources(const struct pci_dev *bridge, + struct resource_list_x *fail_head) +{ + struct pci_bus *b; + + pdev_assign_resources_sorted((struct pci_dev *)bridge, fail_head); + + b = bridge->subordinate; + if (!b) + return; + + __pci_bus_assign_resources(b, fail_head); + + switch (bridge->class >> 8) { + case PCI_CLASS_BRIDGE_PCI: + pci_setup_bridge(b); + break; + + case PCI_CLASS_BRIDGE_CARDBUS: + pci_setup_cardbus(b); + break; + + default: + dev_info(&bridge->dev, "not setting up bridge for bus " + "%04x:%02x\n", pci_domain_nr(b), b->number); + break; + } +} +static void pci_bridge_release_resources(struct pci_bus *bus, + unsigned long type) +{ + int idx; + bool changed = false; + struct pci_dev *dev; + struct resource *r; + unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM | + IORESOURCE_PREFETCH; + + dev = bus->self; + for (idx = PCI_BRIDGE_RESOURCES; idx <= PCI_BRIDGE_RESOURCE_END; + idx++) { + r = &dev->resource[idx]; + if ((r->flags & type_mask) != type) + continue; + if (!r->parent) + continue; + /* + * if there are children under that, we should release them + * all + */ + release_child_resources(r); + if (!release_resource(r)) { + dev_printk(KERN_DEBUG, &dev->dev, + "resource %d %pR released\n", idx, r); + /* keep the old size */ + r->end = resource_size(r) - 1; + r->start = 0; + r->flags = 0; + changed = true; + } + } + + if (changed) { + /* avoiding touch the one without PREF */ + if (type & IORESOURCE_PREFETCH) + type = IORESOURCE_PREFETCH; + __pci_setup_bridge(bus, type); + } +} + +enum release_type { + leaf_only, + whole_subtree, +}; +/* + * try to release pci bridge resources that is from leaf bridge, + * so we can allocate big new one later + */ +static void __ref pci_bus_release_bridge_resources(struct pci_bus *bus, + unsigned long type, + enum release_type rel_type) +{ + struct pci_dev *dev; + bool is_leaf_bridge = true; + + list_for_each_entry(dev, &bus->devices, bus_list) { + struct pci_bus *b = dev->subordinate; + if (!b) + continue; + + is_leaf_bridge = false; + + if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI) + continue; + + if (rel_type == whole_subtree) + pci_bus_release_bridge_resources(b, type, + whole_subtree); + } + + if (pci_is_root_bus(bus)) + return; + + if ((bus->self->class >> 8) != PCI_CLASS_BRIDGE_PCI) + return; + + if ((rel_type == whole_subtree) || is_leaf_bridge) + pci_bridge_release_resources(bus, type); +} + static void pci_bus_dump_res(struct pci_bus *bus) { - int i; + struct resource *res; + int i; - for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { - struct resource *res = bus->resource[i]; - if (!res || !res->end) + pci_bus_for_each_resource(bus, res, i) { + if (!res || !res->end || !res->flags) continue; dev_printk(KERN_DEBUG, &bus->dev, "resource %d %pR\n", i, res); @@ -600,11 +838,65 @@ static void pci_bus_dump_resources(struct pci_bus *bus) } } +static int __init pci_bus_get_depth(struct pci_bus *bus) +{ + int depth = 0; + struct pci_dev *dev; + + list_for_each_entry(dev, &bus->devices, bus_list) { + int ret; + struct pci_bus *b = dev->subordinate; + if (!b) + continue; + + ret = pci_bus_get_depth(b); + if (ret + 1 > depth) + depth = ret + 1; + } + + return depth; +} +static int __init pci_get_max_depth(void) +{ + int depth = 0; + struct pci_bus *bus; + + list_for_each_entry(bus, &pci_root_buses, node) { + int ret; + + ret = pci_bus_get_depth(bus); + if (ret > depth) + depth = ret; + } + + return depth; +} + +/* + * first try will not touch pci bridge res + * second and later try will clear small leaf bridge res + * will stop till to the max deepth if can not find good one + */ void __init pci_assign_unassigned_resources(void) { struct pci_bus *bus; + int tried_times = 0; + enum release_type rel_type = leaf_only; + struct resource_list_x head, *list; + unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM | + IORESOURCE_PREFETCH; + unsigned long failed_type; + int max_depth = pci_get_max_depth(); + int pci_try_num; + + head.next = NULL; + + pci_try_num = max_depth + 1; + printk(KERN_DEBUG "PCI: max bus depth: %d pci_try_num: %d\n", + max_depth, pci_try_num); +again: /* Depth first, calculate sizes and alignments of all subordinate buses. */ list_for_each_entry(bus, &pci_root_buses, node) { @@ -612,12 +904,130 @@ pci_assign_unassigned_resources(void) } /* Depth last, allocate resources and update the hardware. */ list_for_each_entry(bus, &pci_root_buses, node) { - pci_bus_assign_resources(bus); - pci_enable_bridges(bus); + __pci_bus_assign_resources(bus, &head); } + tried_times++; + + /* any device complain? */ + if (!head.next) + goto enable_and_dump; + failed_type = 0; + for (list = head.next; list;) { + failed_type |= list->flags; + list = list->next; + } + /* + * io port are tight, don't try extra + * or if reach the limit, don't want to try more + */ + failed_type &= type_mask; + if ((failed_type == IORESOURCE_IO) || (tried_times >= pci_try_num)) { + free_failed_list(&head); + goto enable_and_dump; + } + + printk(KERN_DEBUG "PCI: No. %d try to assign unassigned res\n", + tried_times + 1); + + /* third times and later will not check if it is leaf */ + if ((tried_times + 1) > 2) + rel_type = whole_subtree; + + /* + * Try to release leaf bridge's resources that doesn't fit resource of + * child device under that bridge + */ + for (list = head.next; list;) { + bus = list->dev->bus; + pci_bus_release_bridge_resources(bus, list->flags & type_mask, + rel_type); + list = list->next; + } + /* restore size and flags */ + for (list = head.next; list;) { + struct resource *res = list->res; + + res->start = list->start; + res->end = list->end; + res->flags = list->flags; + if (list->dev->subordinate) + res->flags = 0; + + list = list->next; + } + free_failed_list(&head); + + goto again; + +enable_and_dump: + /* Depth last, update the hardware. */ + list_for_each_entry(bus, &pci_root_buses, node) + pci_enable_bridges(bus); /* dump the resource on buses */ list_for_each_entry(bus, &pci_root_buses, node) { pci_bus_dump_resources(bus); } } + +void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge) +{ + struct pci_bus *parent = bridge->subordinate; + int tried_times = 0; + struct resource_list_x head, *list; + int retval; + unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM | + IORESOURCE_PREFETCH; + + head.next = NULL; + +again: + pci_bus_size_bridges(parent); + __pci_bridge_assign_resources(bridge, &head); + retval = pci_reenable_device(bridge); + pci_set_master(bridge); + pci_enable_bridges(parent); + + tried_times++; + + if (!head.next) + return; + + if (tried_times >= 2) { + /* still fail, don't need to try more */ + free_failed_list(&head); + return; + } + + printk(KERN_DEBUG "PCI: No. %d try to assign unassigned res\n", + tried_times + 1); + + /* + * Try to release leaf bridge's resources that doesn't fit resource of + * child device under that bridge + */ + for (list = head.next; list;) { + struct pci_bus *bus = list->dev->bus; + unsigned long flags = list->flags; + + pci_bus_release_bridge_resources(bus, flags & type_mask, + whole_subtree); + list = list->next; + } + /* restore size and flags */ + for (list = head.next; list;) { + struct resource *res = list->res; + + res->start = list->start; + res->end = list->end; + res->flags = list->flags; + if (list->dev->subordinate) + res->flags = 0; + + list = list->next; + } + free_failed_list(&head); + + goto again; +} +EXPORT_SYMBOL_GPL(pci_assign_unassigned_bridge_resources); diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c index 8c02b6c53bdb..f75a44d37fbe 100644 --- a/drivers/pci/slot.c +++ b/drivers/pci/slot.c @@ -29,7 +29,7 @@ static ssize_t pci_slot_attr_store(struct kobject *kobj, return attribute->store ? attribute->store(slot, buf, len) : -EIO; } -static struct sysfs_ops pci_slot_sysfs_ops = { +static const struct sysfs_ops pci_slot_sysfs_ops = { .show = pci_slot_attr_show, .store = pci_slot_attr_store, }; @@ -47,6 +47,55 @@ static ssize_t address_read_file(struct pci_slot *slot, char *buf) slot->number); } +/* these strings match up with the values in pci_bus_speed */ +static char *pci_bus_speed_strings[] = { + "33 MHz PCI", /* 0x00 */ + "66 MHz PCI", /* 0x01 */ + "66 MHz PCI-X", /* 0x02 */ + "100 MHz PCI-X", /* 0x03 */ + "133 MHz PCI-X", /* 0x04 */ + NULL, /* 0x05 */ + NULL, /* 0x06 */ + NULL, /* 0x07 */ + NULL, /* 0x08 */ + "66 MHz PCI-X 266", /* 0x09 */ + "100 MHz PCI-X 266", /* 0x0a */ + "133 MHz PCI-X 266", /* 0x0b */ + "Unknown AGP", /* 0x0c */ + "1x AGP", /* 0x0d */ + "2x AGP", /* 0x0e */ + "4x AGP", /* 0x0f */ + "8x AGP", /* 0x10 */ + "66 MHz PCI-X 533", /* 0x11 */ + "100 MHz PCI-X 533", /* 0x12 */ + "133 MHz PCI-X 533", /* 0x13 */ + "2.5 GT/s PCIe", /* 0x14 */ + "5.0 GT/s PCIe", /* 0x15 */ + "8.0 GT/s PCIe", /* 0x16 */ +}; + +static ssize_t bus_speed_read(enum pci_bus_speed speed, char *buf) +{ + const char *speed_string; + + if (speed < ARRAY_SIZE(pci_bus_speed_strings)) + speed_string = pci_bus_speed_strings[speed]; + else + speed_string = "Unknown"; + + return sprintf(buf, "%s\n", speed_string); +} + +static ssize_t max_speed_read_file(struct pci_slot *slot, char *buf) +{ + return bus_speed_read(slot->bus->max_bus_speed, buf); +} + +static ssize_t cur_speed_read_file(struct pci_slot *slot, char *buf) +{ + return bus_speed_read(slot->bus->cur_bus_speed, buf); +} + static void pci_slot_release(struct kobject *kobj) { struct pci_dev *dev; @@ -66,9 +115,15 @@ static void pci_slot_release(struct kobject *kobj) static struct pci_slot_attribute pci_slot_attr_address = __ATTR(address, (S_IFREG | S_IRUGO), address_read_file, NULL); +static struct pci_slot_attribute pci_slot_attr_max_speed = + __ATTR(max_bus_speed, (S_IFREG | S_IRUGO), max_speed_read_file, NULL); +static struct pci_slot_attribute pci_slot_attr_cur_speed = + __ATTR(cur_bus_speed, (S_IFREG | S_IRUGO), cur_speed_read_file, NULL); static struct attribute *pci_slot_default_attrs[] = { &pci_slot_attr_address.attr, + &pci_slot_attr_max_speed.attr, + &pci_slot_attr_cur_speed.attr, NULL, }; diff --git a/drivers/pci/vpd.c b/drivers/pci/vpd.c new file mode 100644 index 000000000000..a5a5ca17cfe6 --- /dev/null +++ b/drivers/pci/vpd.c @@ -0,0 +1,61 @@ +/* + * File: vpd.c + * Purpose: Provide PCI VPD support + * + * Copyright (C) 2010 Broadcom Corporation. + */ + +#include <linux/pci.h> + +int pci_vpd_find_tag(const u8 *buf, unsigned int off, unsigned int len, u8 rdt) +{ + int i; + + for (i = off; i < len; ) { + u8 val = buf[i]; + + if (val & PCI_VPD_LRDT) { + /* Don't return success of the tag isn't complete */ + if (i + PCI_VPD_LRDT_TAG_SIZE > len) + break; + + if (val == rdt) + return i; + + i += PCI_VPD_LRDT_TAG_SIZE + + pci_vpd_lrdt_size(&buf[i]); + } else { + u8 tag = val & ~PCI_VPD_SRDT_LEN_MASK; + + if (tag == rdt) + return i; + + if (tag == PCI_VPD_SRDT_END) + break; + + i += PCI_VPD_SRDT_TAG_SIZE + + pci_vpd_srdt_size(&buf[i]); + } + } + + return -ENOENT; +} +EXPORT_SYMBOL_GPL(pci_vpd_find_tag); + +int pci_vpd_find_info_keyword(const u8 *buf, unsigned int off, + unsigned int len, const char *kw) +{ + int i; + + for (i = off; i + PCI_VPD_INFO_FLD_HDR_SIZE <= off + len;) { + if (buf[i + 0] == kw[0] && + buf[i + 1] == kw[1]) + return i; + + i += PCI_VPD_INFO_FLD_HDR_SIZE + + pci_vpd_info_field_size(&buf[i]); + } + + return -ENOENT; +} +EXPORT_SYMBOL_GPL(pci_vpd_find_info_keyword); |
