summaryrefslogtreecommitdiffstats
path: root/drivers/pci/host/pci-hyperv.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/host/pci-hyperv.c')
-rw-r--r--drivers/pci/host/pci-hyperv.c112
1 files changed, 87 insertions, 25 deletions
diff --git a/drivers/pci/host/pci-hyperv.c b/drivers/pci/host/pci-hyperv.c
index 2faf38eab785..50cdefe3f6d3 100644
--- a/drivers/pci/host/pci-hyperv.c
+++ b/drivers/pci/host/pci-hyperv.c
@@ -447,7 +447,6 @@ struct hv_pcibus_device {
spinlock_t device_list_lock; /* Protect lists below */
void __iomem *cfg_addr;
- struct semaphore enum_sem;
struct list_head resources_for_children;
struct list_head children;
@@ -461,6 +460,8 @@ struct hv_pcibus_device {
struct retarget_msi_interrupt retarget_msi_interrupt_params;
spinlock_t retarget_msi_interrupt_lock;
+
+ struct workqueue_struct *wq;
};
/*
@@ -520,6 +521,8 @@ struct hv_pci_compl {
s32 completion_status;
};
+static void hv_pci_onchannelcallback(void *context);
+
/**
* hv_pci_generic_compl() - Invoked for a completion packet
* @context: Set up by the sender of the packet.
@@ -653,7 +656,7 @@ static void _hv_pcifront_read_config(struct hv_pci_dev *hpdev, int where,
break;
}
/*
- * Make sure the write was done before we release the spinlock
+ * Make sure the read was done before we release the spinlock
* allowing consecutive reads/writes.
*/
mb();
@@ -664,6 +667,31 @@ static void _hv_pcifront_read_config(struct hv_pci_dev *hpdev, int where,
}
}
+static u16 hv_pcifront_get_vendor_id(struct hv_pci_dev *hpdev)
+{
+ u16 ret;
+ unsigned long flags;
+ void __iomem *addr = hpdev->hbus->cfg_addr + CFG_PAGE_OFFSET +
+ PCI_VENDOR_ID;
+
+ spin_lock_irqsave(&hpdev->hbus->config_lock, flags);
+
+ /* Choose the function to be read. (See comment above) */
+ writel(hpdev->desc.win_slot.slot, hpdev->hbus->cfg_addr);
+ /* Make sure the function was chosen before we start reading. */
+ mb();
+ /* Read from that function's config space. */
+ ret = readw(addr);
+ /*
+ * mb() is not required here, because the spin_unlock_irqrestore()
+ * is a barrier.
+ */
+
+ spin_unlock_irqrestore(&hpdev->hbus->config_lock, flags);
+
+ return ret;
+}
+
/**
* _hv_pcifront_write_config() - Internal PCI config write
* @hpdev: The PCI driver's representation of the device
@@ -1106,8 +1134,37 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
* Since this function is called with IRQ locks held, can't
* do normal wait for completion; instead poll.
*/
- while (!try_wait_for_completion(&comp.comp_pkt.host_event))
+ while (!try_wait_for_completion(&comp.comp_pkt.host_event)) {
+ /* 0xFFFF means an invalid PCI VENDOR ID. */
+ if (hv_pcifront_get_vendor_id(hpdev) == 0xFFFF) {
+ dev_err_once(&hbus->hdev->device,
+ "the device has gone\n");
+ goto free_int_desc;
+ }
+
+ /*
+ * When the higher level interrupt code calls us with
+ * interrupt disabled, we must poll the channel by calling
+ * the channel callback directly when channel->target_cpu is
+ * the current CPU. When the higher level interrupt code
+ * calls us with interrupt enabled, let's add the
+ * local_bh_disable()/enable() to avoid race.
+ */
+ local_bh_disable();
+
+ if (hbus->hdev->channel->target_cpu == smp_processor_id())
+ hv_pci_onchannelcallback(hbus);
+
+ local_bh_enable();
+
+ if (hpdev->state == hv_pcichild_ejecting) {
+ dev_err_once(&hbus->hdev->device,
+ "the device is being ejected\n");
+ goto free_int_desc;
+ }
+
udelay(100);
+ }
if (comp.comp_pkt.completion_status < 0) {
dev_err(&hbus->hdev->device,
@@ -1590,12 +1647,8 @@ static struct hv_pci_dev *get_pcichild_wslot(struct hv_pcibus_device *hbus,
* It must also treat the omission of a previously observed device as
* notification that the device no longer exists.
*
- * Note that this function is a work item, and it may not be
- * invoked in the order that it was queued. Back to back
- * updates of the list of present devices may involve queuing
- * multiple work items, and this one may run before ones that
- * were sent later. As such, this function only does something
- * if is the last one in the queue.
+ * Note that this function is serialized with hv_eject_device_work(),
+ * because both are pushed to the ordered workqueue hbus->wq.
*/
static void pci_devices_present_work(struct work_struct *work)
{
@@ -1616,11 +1669,6 @@ static void pci_devices_present_work(struct work_struct *work)
INIT_LIST_HEAD(&removed);
- if (down_interruptible(&hbus->enum_sem)) {
- put_hvpcibus(hbus);
- return;
- }
-
/* Pull this off the queue and process it if it was the last one. */
spin_lock_irqsave(&hbus->device_list_lock, flags);
while (!list_empty(&hbus->dr_list)) {
@@ -1637,7 +1685,6 @@ static void pci_devices_present_work(struct work_struct *work)
spin_unlock_irqrestore(&hbus->device_list_lock, flags);
if (!dr) {
- up(&hbus->enum_sem);
put_hvpcibus(hbus);
return;
}
@@ -1724,7 +1771,6 @@ static void pci_devices_present_work(struct work_struct *work)
break;
}
- up(&hbus->enum_sem);
put_hvpcibus(hbus);
kfree(dr);
}
@@ -1743,6 +1789,7 @@ static void hv_pci_devices_present(struct hv_pcibus_device *hbus,
struct hv_dr_state *dr;
struct hv_dr_work *dr_wrk;
unsigned long flags;
+ bool pending_dr;
dr_wrk = kzalloc(sizeof(*dr_wrk), GFP_NOWAIT);
if (!dr_wrk)
@@ -1766,11 +1813,21 @@ static void hv_pci_devices_present(struct hv_pcibus_device *hbus,
}
spin_lock_irqsave(&hbus->device_list_lock, flags);
+ /*
+ * If pending_dr is true, we have already queued a work,
+ * which will see the new dr. Otherwise, we need to
+ * queue a new work.
+ */
+ pending_dr = !list_empty(&hbus->dr_list);
list_add_tail(&dr->list_entry, &hbus->dr_list);
spin_unlock_irqrestore(&hbus->device_list_lock, flags);
- get_hvpcibus(hbus);
- schedule_work(&dr_wrk->wrk);
+ if (pending_dr) {
+ kfree(dr_wrk);
+ } else {
+ get_hvpcibus(hbus);
+ queue_work(hbus->wq, &dr_wrk->wrk);
+ }
}
/**
@@ -1796,10 +1853,7 @@ static void hv_eject_device_work(struct work_struct *work)
hpdev = container_of(work, struct hv_pci_dev, wrk);
- if (hpdev->state != hv_pcichild_ejecting) {
- put_pcichild(hpdev, hv_pcidev_ref_pnp);
- return;
- }
+ WARN_ON(hpdev->state != hv_pcichild_ejecting);
/*
* Ejection can come before or after the PCI bus has been set up, so
@@ -1848,7 +1902,7 @@ static void hv_pci_eject_device(struct hv_pci_dev *hpdev)
get_pcichild(hpdev, hv_pcidev_ref_pnp);
INIT_WORK(&hpdev->wrk, hv_eject_device_work);
get_hvpcibus(hpdev->hbus);
- schedule_work(&hpdev->wrk);
+ queue_work(hpdev->hbus->wq, &hpdev->wrk);
}
/**
@@ -2461,13 +2515,18 @@ static int hv_pci_probe(struct hv_device *hdev,
spin_lock_init(&hbus->config_lock);
spin_lock_init(&hbus->device_list_lock);
spin_lock_init(&hbus->retarget_msi_interrupt_lock);
- sema_init(&hbus->enum_sem, 1);
init_completion(&hbus->remove_event);
+ hbus->wq = alloc_ordered_workqueue("hv_pci_%x", 0,
+ hbus->sysdata.domain);
+ if (!hbus->wq) {
+ ret = -ENOMEM;
+ goto free_bus;
+ }
ret = vmbus_open(hdev->channel, pci_ring_size, pci_ring_size, NULL, 0,
hv_pci_onchannelcallback, hbus);
if (ret)
- goto free_bus;
+ goto destroy_wq;
hv_set_drvdata(hdev, hbus);
@@ -2536,6 +2595,8 @@ free_config:
hv_free_config_window(hbus);
close:
vmbus_close(hdev->channel);
+destroy_wq:
+ destroy_workqueue(hbus->wq);
free_bus:
free_page((unsigned long)hbus);
return ret;
@@ -2615,6 +2676,7 @@ static int hv_pci_remove(struct hv_device *hdev)
irq_domain_free_fwnode(hbus->sysdata.fwnode);
put_hvpcibus(hbus);
wait_for_completion(&hbus->remove_event);
+ destroy_workqueue(hbus->wq);
free_page((unsigned long)hbus);
return 0;
}
OpenPOWER on IntegriCloud