diff options
Diffstat (limited to 'drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c')
| -rw-r--r-- | drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 3489 |
1 files changed, 3115 insertions, 374 deletions
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c index 7d820c395375..abdff458b80f 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c @@ -42,7 +42,7 @@ #define DRIVER_NAME "rtl8xxxu" -static int rtl8xxxu_debug; +static int rtl8xxxu_debug = RTL8XXXU_DEBUG_EFUSE; static bool rtl8xxxu_ht40_2g; MODULE_AUTHOR("Jes Sorensen <Jes.Sorensen@redhat.com>"); @@ -54,6 +54,9 @@ MODULE_FIRMWARE("rtlwifi/rtl8723aufw_B_NoBT.bin"); MODULE_FIRMWARE("rtlwifi/rtl8192cufw_A.bin"); MODULE_FIRMWARE("rtlwifi/rtl8192cufw_B.bin"); MODULE_FIRMWARE("rtlwifi/rtl8192cufw_TMSC.bin"); +MODULE_FIRMWARE("rtlwifi/rtl8192eu_nic.bin"); +MODULE_FIRMWARE("rtlwifi/rtl8723bu_nic.bin"); +MODULE_FIRMWARE("rtlwifi/rtl8723bu_bt.bin"); module_param_named(debug, rtl8xxxu_debug, int, 0600); MODULE_PARM_DESC(debug, "Set debug mask"); @@ -150,6 +153,37 @@ static struct rtl8xxxu_reg8val rtl8723a_mac_init_table[] = { {0x70a, 0x65}, {0x70b, 0x87}, {0xffff, 0xff}, }; +static struct rtl8xxxu_reg8val rtl8723b_mac_init_table[] = { + {0x02f, 0x30}, {0x035, 0x00}, {0x039, 0x08}, {0x04e, 0xe0}, + {0x064, 0x00}, {0x067, 0x20}, {0x428, 0x0a}, {0x429, 0x10}, + {0x430, 0x00}, {0x431, 0x00}, + {0x432, 0x00}, {0x433, 0x01}, {0x434, 0x04}, {0x435, 0x05}, + {0x436, 0x07}, {0x437, 0x08}, {0x43c, 0x04}, {0x43d, 0x05}, + {0x43e, 0x07}, {0x43f, 0x08}, {0x440, 0x5d}, {0x441, 0x01}, + {0x442, 0x00}, {0x444, 0x10}, {0x445, 0x00}, {0x446, 0x00}, + {0x447, 0x00}, {0x448, 0x00}, {0x449, 0xf0}, {0x44a, 0x0f}, + {0x44b, 0x3e}, {0x44c, 0x10}, {0x44d, 0x00}, {0x44e, 0x00}, + {0x44f, 0x00}, {0x450, 0x00}, {0x451, 0xf0}, {0x452, 0x0f}, + {0x453, 0x00}, {0x456, 0x5e}, {0x460, 0x66}, {0x461, 0x66}, + {0x4c8, 0xff}, {0x4c9, 0x08}, {0x4cc, 0xff}, + {0x4cd, 0xff}, {0x4ce, 0x01}, {0x500, 0x26}, {0x501, 0xa2}, + {0x502, 0x2f}, {0x503, 0x00}, {0x504, 0x28}, {0x505, 0xa3}, + {0x506, 0x5e}, {0x507, 0x00}, {0x508, 0x2b}, {0x509, 0xa4}, + {0x50a, 0x5e}, {0x50b, 0x00}, {0x50c, 0x4f}, {0x50d, 0xa4}, + {0x50e, 0x00}, {0x50f, 0x00}, {0x512, 0x1c}, {0x514, 0x0a}, + {0x516, 0x0a}, {0x525, 0x4f}, + {0x550, 0x10}, {0x551, 0x10}, {0x559, 0x02}, {0x55c, 0x50}, + {0x55d, 0xff}, {0x605, 0x30}, {0x608, 0x0e}, {0x609, 0x2a}, + {0x620, 0xff}, {0x621, 0xff}, {0x622, 0xff}, {0x623, 0xff}, + {0x624, 0xff}, {0x625, 0xff}, {0x626, 0xff}, {0x627, 0xff}, + {0x638, 0x50}, {0x63c, 0x0a}, {0x63d, 0x0a}, {0x63e, 0x0e}, + {0x63f, 0x0e}, {0x640, 0x40}, {0x642, 0x40}, {0x643, 0x00}, + {0x652, 0xc8}, {0x66e, 0x05}, {0x700, 0x21}, {0x701, 0x43}, + {0x702, 0x65}, {0x703, 0x87}, {0x708, 0x21}, {0x709, 0x43}, + {0x70a, 0x65}, {0x70b, 0x87}, {0x765, 0x18}, {0x76e, 0x04}, + {0xffff, 0xff}, +}; + static struct rtl8xxxu_reg32val rtl8723a_phy_1t_init_table[] = { {0x800, 0x80040000}, {0x804, 0x00000003}, {0x808, 0x0000fc00}, {0x80c, 0x0000000a}, @@ -248,6 +282,107 @@ static struct rtl8xxxu_reg32val rtl8723a_phy_1t_init_table[] = { {0xffff, 0xffffffff}, }; +static struct rtl8xxxu_reg32val rtl8723b_phy_1t_init_table[] = { + {0x800, 0x80040000}, {0x804, 0x00000003}, + {0x808, 0x0000fc00}, {0x80c, 0x0000000a}, + {0x810, 0x10001331}, {0x814, 0x020c3d10}, + {0x818, 0x02200385}, {0x81c, 0x00000000}, + {0x820, 0x01000100}, {0x824, 0x00190204}, + {0x828, 0x00000000}, {0x82c, 0x00000000}, + {0x830, 0x00000000}, {0x834, 0x00000000}, + {0x838, 0x00000000}, {0x83c, 0x00000000}, + {0x840, 0x00010000}, {0x844, 0x00000000}, + {0x848, 0x00000000}, {0x84c, 0x00000000}, + {0x850, 0x00000000}, {0x854, 0x00000000}, + {0x858, 0x569a11a9}, {0x85c, 0x01000014}, + {0x860, 0x66f60110}, {0x864, 0x061f0649}, + {0x868, 0x00000000}, {0x86c, 0x27272700}, + {0x870, 0x07000760}, {0x874, 0x25004000}, + {0x878, 0x00000808}, {0x87c, 0x00000000}, + {0x880, 0xb0000c1c}, {0x884, 0x00000001}, + {0x888, 0x00000000}, {0x88c, 0xccc000c0}, + {0x890, 0x00000800}, {0x894, 0xfffffffe}, + {0x898, 0x40302010}, {0x89c, 0x00706050}, + {0x900, 0x00000000}, {0x904, 0x00000023}, + {0x908, 0x00000000}, {0x90c, 0x81121111}, + {0x910, 0x00000002}, {0x914, 0x00000201}, + {0xa00, 0x00d047c8}, {0xa04, 0x80ff800c}, + {0xa08, 0x8c838300}, {0xa0c, 0x2e7f120f}, + {0xa10, 0x9500bb78}, {0xa14, 0x1114d028}, + {0xa18, 0x00881117}, {0xa1c, 0x89140f00}, + {0xa20, 0x1a1b0000}, {0xa24, 0x090e1317}, + {0xa28, 0x00000204}, {0xa2c, 0x00d30000}, + {0xa70, 0x101fbf00}, {0xa74, 0x00000007}, + {0xa78, 0x00000900}, {0xa7c, 0x225b0606}, + {0xa80, 0x21806490}, {0xb2c, 0x00000000}, + {0xc00, 0x48071d40}, {0xc04, 0x03a05611}, + {0xc08, 0x000000e4}, {0xc0c, 0x6c6c6c6c}, + {0xc10, 0x08800000}, {0xc14, 0x40000100}, + {0xc18, 0x08800000}, {0xc1c, 0x40000100}, + {0xc20, 0x00000000}, {0xc24, 0x00000000}, + {0xc28, 0x00000000}, {0xc2c, 0x00000000}, + {0xc30, 0x69e9ac44}, {0xc34, 0x469652af}, + {0xc38, 0x49795994}, {0xc3c, 0x0a97971c}, + {0xc40, 0x1f7c403f}, {0xc44, 0x000100b7}, + {0xc48, 0xec020107}, {0xc4c, 0x007f037f}, + {0xc50, 0x69553420}, {0xc54, 0x43bc0094}, + {0xc58, 0x00013149}, {0xc5c, 0x00250492}, + {0xc60, 0x00000000}, {0xc64, 0x7112848b}, + {0xc68, 0x47c00bff}, {0xc6c, 0x00000036}, + {0xc70, 0x2c7f000d}, {0xc74, 0x020610db}, + {0xc78, 0x0000001f}, {0xc7c, 0x00b91612}, + {0xc80, 0x390000e4}, {0xc84, 0x20f60000}, + {0xc88, 0x40000100}, {0xc8c, 0x20200000}, + {0xc90, 0x00020e1a}, {0xc94, 0x00000000}, + {0xc98, 0x00020e1a}, {0xc9c, 0x00007f7f}, + {0xca0, 0x00000000}, {0xca4, 0x000300a0}, + {0xca8, 0x00000000}, {0xcac, 0x00000000}, + {0xcb0, 0x00000000}, {0xcb4, 0x00000000}, + {0xcb8, 0x00000000}, {0xcbc, 0x28000000}, + {0xcc0, 0x00000000}, {0xcc4, 0x00000000}, + {0xcc8, 0x00000000}, {0xccc, 0x00000000}, + {0xcd0, 0x00000000}, {0xcd4, 0x00000000}, + {0xcd8, 0x64b22427}, {0xcdc, 0x00766932}, + {0xce0, 0x00222222}, {0xce4, 0x00000000}, + {0xce8, 0x37644302}, {0xcec, 0x2f97d40c}, + {0xd00, 0x00000740}, {0xd04, 0x40020401}, + {0xd08, 0x0000907f}, {0xd0c, 0x20010201}, + {0xd10, 0xa0633333}, {0xd14, 0x3333bc53}, + {0xd18, 0x7a8f5b6f}, {0xd2c, 0xcc979975}, + {0xd30, 0x00000000}, {0xd34, 0x80608000}, + {0xd38, 0x00000000}, {0xd3c, 0x00127353}, + {0xd40, 0x00000000}, {0xd44, 0x00000000}, + {0xd48, 0x00000000}, {0xd4c, 0x00000000}, + {0xd50, 0x6437140a}, {0xd54, 0x00000000}, + {0xd58, 0x00000282}, {0xd5c, 0x30032064}, + {0xd60, 0x4653de68}, {0xd64, 0x04518a3c}, + {0xd68, 0x00002101}, {0xd6c, 0x2a201c16}, + {0xd70, 0x1812362e}, {0xd74, 0x322c2220}, + {0xd78, 0x000e3c24}, {0xe00, 0x2d2d2d2d}, + {0xe04, 0x2d2d2d2d}, {0xe08, 0x0390272d}, + {0xe10, 0x2d2d2d2d}, {0xe14, 0x2d2d2d2d}, + {0xe18, 0x2d2d2d2d}, {0xe1c, 0x2d2d2d2d}, + {0xe28, 0x00000000}, {0xe30, 0x1000dc1f}, + {0xe34, 0x10008c1f}, {0xe38, 0x02140102}, + {0xe3c, 0x681604c2}, {0xe40, 0x01007c00}, + {0xe44, 0x01004800}, {0xe48, 0xfb000000}, + {0xe4c, 0x000028d1}, {0xe50, 0x1000dc1f}, + {0xe54, 0x10008c1f}, {0xe58, 0x02140102}, + {0xe5c, 0x28160d05}, {0xe60, 0x00000008}, + {0xe68, 0x001b2556}, {0xe6c, 0x00c00096}, + {0xe70, 0x00c00096}, {0xe74, 0x01000056}, + {0xe78, 0x01000014}, {0xe7c, 0x01000056}, + {0xe80, 0x01000014}, {0xe84, 0x00c00096}, + {0xe88, 0x01000056}, {0xe8c, 0x00c00096}, + {0xed0, 0x00c00096}, {0xed4, 0x00c00096}, + {0xed8, 0x00c00096}, {0xedc, 0x000000d6}, + {0xee0, 0x000000d6}, {0xeec, 0x01c00016}, + {0xf14, 0x00000003}, {0xf4c, 0x00000000}, + {0xf00, 0x00000300}, + {0x820, 0x01000100}, {0x800, 0x83040000}, + {0xffff, 0xffffffff}, +}; + static struct rtl8xxxu_reg32val rtl8192cu_phy_2t_init_table[] = { {0x024, 0x0011800f}, {0x028, 0x00ffdb83}, {0x800, 0x80040002}, {0x804, 0x00000003}, @@ -613,6 +748,77 @@ static struct rtl8xxxu_reg32val rtl8xxx_agc_highpa_table[] = { {0xffff, 0xffffffff} }; +static struct rtl8xxxu_reg32val rtl8xxx_agc_8723bu_table[] = { + {0xc78, 0xfd000001}, {0xc78, 0xfc010001}, + {0xc78, 0xfb020001}, {0xc78, 0xfa030001}, + {0xc78, 0xf9040001}, {0xc78, 0xf8050001}, + {0xc78, 0xf7060001}, {0xc78, 0xf6070001}, + {0xc78, 0xf5080001}, {0xc78, 0xf4090001}, + {0xc78, 0xf30a0001}, {0xc78, 0xf20b0001}, + {0xc78, 0xf10c0001}, {0xc78, 0xf00d0001}, + {0xc78, 0xef0e0001}, {0xc78, 0xee0f0001}, + {0xc78, 0xed100001}, {0xc78, 0xec110001}, + {0xc78, 0xeb120001}, {0xc78, 0xea130001}, + {0xc78, 0xe9140001}, {0xc78, 0xe8150001}, + {0xc78, 0xe7160001}, {0xc78, 0xe6170001}, + {0xc78, 0xe5180001}, {0xc78, 0xe4190001}, + {0xc78, 0xe31a0001}, {0xc78, 0xa51b0001}, + {0xc78, 0xa41c0001}, {0xc78, 0xa31d0001}, + {0xc78, 0x671e0001}, {0xc78, 0x661f0001}, + {0xc78, 0x65200001}, {0xc78, 0x64210001}, + {0xc78, 0x63220001}, {0xc78, 0x4a230001}, + {0xc78, 0x49240001}, {0xc78, 0x48250001}, + {0xc78, 0x47260001}, {0xc78, 0x46270001}, + {0xc78, 0x45280001}, {0xc78, 0x44290001}, + {0xc78, 0x432a0001}, {0xc78, 0x422b0001}, + {0xc78, 0x292c0001}, {0xc78, 0x282d0001}, + {0xc78, 0x272e0001}, {0xc78, 0x262f0001}, + {0xc78, 0x0a300001}, {0xc78, 0x09310001}, + {0xc78, 0x08320001}, {0xc78, 0x07330001}, + {0xc78, 0x06340001}, {0xc78, 0x05350001}, + {0xc78, 0x04360001}, {0xc78, 0x03370001}, + {0xc78, 0x02380001}, {0xc78, 0x01390001}, + {0xc78, 0x013a0001}, {0xc78, 0x013b0001}, + {0xc78, 0x013c0001}, {0xc78, 0x013d0001}, + {0xc78, 0x013e0001}, {0xc78, 0x013f0001}, + {0xc78, 0xfc400001}, {0xc78, 0xfb410001}, + {0xc78, 0xfa420001}, {0xc78, 0xf9430001}, + {0xc78, 0xf8440001}, {0xc78, 0xf7450001}, + {0xc78, 0xf6460001}, {0xc78, 0xf5470001}, + {0xc78, 0xf4480001}, {0xc78, 0xf3490001}, + {0xc78, 0xf24a0001}, {0xc78, 0xf14b0001}, + {0xc78, 0xf04c0001}, {0xc78, 0xef4d0001}, + {0xc78, 0xee4e0001}, {0xc78, 0xed4f0001}, + {0xc78, 0xec500001}, {0xc78, 0xeb510001}, + {0xc78, 0xea520001}, {0xc78, 0xe9530001}, + {0xc78, 0xe8540001}, {0xc78, 0xe7550001}, + {0xc78, 0xe6560001}, {0xc78, 0xe5570001}, + {0xc78, 0xe4580001}, {0xc78, 0xe3590001}, + {0xc78, 0xa65a0001}, {0xc78, 0xa55b0001}, + {0xc78, 0xa45c0001}, {0xc78, 0xa35d0001}, + {0xc78, 0x675e0001}, {0xc78, 0x665f0001}, + {0xc78, 0x65600001}, {0xc78, 0x64610001}, + {0xc78, 0x63620001}, {0xc78, 0x62630001}, + {0xc78, 0x61640001}, {0xc78, 0x48650001}, + {0xc78, 0x47660001}, {0xc78, 0x46670001}, + {0xc78, 0x45680001}, {0xc78, 0x44690001}, + {0xc78, 0x436a0001}, {0xc78, 0x426b0001}, + {0xc78, 0x286c0001}, {0xc78, 0x276d0001}, + {0xc78, 0x266e0001}, {0xc78, 0x256f0001}, + {0xc78, 0x24700001}, {0xc78, 0x09710001}, + {0xc78, 0x08720001}, {0xc78, 0x07730001}, + {0xc78, 0x06740001}, {0xc78, 0x05750001}, + {0xc78, 0x04760001}, {0xc78, 0x03770001}, + {0xc78, 0x02780001}, {0xc78, 0x01790001}, + {0xc78, 0x017a0001}, {0xc78, 0x017b0001}, + {0xc78, 0x017c0001}, {0xc78, 0x017d0001}, + {0xc78, 0x017e0001}, {0xc78, 0x017f0001}, + {0xc50, 0x69553422}, + {0xc50, 0x69553420}, + {0x824, 0x00390204}, + {0xffff, 0xffffffff} +}; + static struct rtl8xxxu_rfregval rtl8723au_radioa_1t_init_table[] = { {0x00, 0x00030159}, {0x01, 0x00031284}, {0x02, 0x00098000}, {0x03, 0x00039c63}, @@ -688,6 +894,75 @@ static struct rtl8xxxu_rfregval rtl8723au_radioa_1t_init_table[] = { {0xff, 0xffffffff} }; +static struct rtl8xxxu_rfregval rtl8723bu_radioa_1t_init_table[] = { + {0x00, 0x00010000}, {0xb0, 0x000dffe0}, + {0xfe, 0x00000000}, {0xfe, 0x00000000}, + {0xfe, 0x00000000}, {0xb1, 0x00000018}, + {0xfe, 0x00000000}, {0xfe, 0x00000000}, + {0xfe, 0x00000000}, {0xb2, 0x00084c00}, + {0xb5, 0x0000d2cc}, {0xb6, 0x000925aa}, + {0xb7, 0x00000010}, {0xb8, 0x0000907f}, + {0x5c, 0x00000002}, {0x7c, 0x00000002}, + {0x7e, 0x00000005}, {0x8b, 0x0006fc00}, + {0xb0, 0x000ff9f0}, {0x1c, 0x000739d2}, + {0x1e, 0x00000000}, {0xdf, 0x00000780}, + {0x50, 0x00067435}, + /* + * The 8723bu vendor driver indicates that bit 8 should be set in + * 0x51 for package types TFBGA90, TFBGA80, and TFBGA79. However + * they never actually check the package type - and just default + * to not setting it. + */ + {0x51, 0x0006b04e}, + {0x52, 0x000007d2}, {0x53, 0x00000000}, + {0x54, 0x00050400}, {0x55, 0x0004026e}, + {0xdd, 0x0000004c}, {0x70, 0x00067435}, + /* + * 0x71 has same package type condition as for register 0x51 + */ + {0x71, 0x0006b04e}, + {0x72, 0x000007d2}, {0x73, 0x00000000}, + {0x74, 0x00050400}, {0x75, 0x0004026e}, + {0xef, 0x00000100}, {0x34, 0x0000add7}, + {0x35, 0x00005c00}, {0x34, 0x00009dd4}, + {0x35, 0x00005000}, {0x34, 0x00008dd1}, + {0x35, 0x00004400}, {0x34, 0x00007dce}, + {0x35, 0x00003800}, {0x34, 0x00006cd1}, + {0x35, 0x00004400}, {0x34, 0x00005cce}, + {0x35, 0x00003800}, {0x34, 0x000048ce}, + {0x35, 0x00004400}, {0x34, 0x000034ce}, + {0x35, 0x00003800}, {0x34, 0x00002451}, + {0x35, 0x00004400}, {0x34, 0x0000144e}, + {0x35, 0x00003800}, {0x34, 0x00000051}, + {0x35, 0x00004400}, {0xef, 0x00000000}, + {0xef, 0x00000100}, {0xed, 0x00000010}, + {0x44, 0x0000add7}, {0x44, 0x00009dd4}, + {0x44, 0x00008dd1}, {0x44, 0x00007dce}, + {0x44, 0x00006cc1}, {0x44, 0x00005cce}, + {0x44, 0x000044d1}, {0x44, 0x000034ce}, + {0x44, 0x00002451}, {0x44, 0x0000144e}, + {0x44, 0x00000051}, {0xef, 0x00000000}, + {0xed, 0x00000000}, {0x7f, 0x00020080}, + {0xef, 0x00002000}, {0x3b, 0x000380ef}, + {0x3b, 0x000302fe}, {0x3b, 0x00028ce6}, + {0x3b, 0x000200bc}, {0x3b, 0x000188a5}, + {0x3b, 0x00010fbc}, {0x3b, 0x00008f71}, + {0x3b, 0x00000900}, {0xef, 0x00000000}, + {0xed, 0x00000001}, {0x40, 0x000380ef}, + {0x40, 0x000302fe}, {0x40, 0x00028ce6}, + {0x40, 0x000200bc}, {0x40, 0x000188a5}, + {0x40, 0x00010fbc}, {0x40, 0x00008f71}, + {0x40, 0x00000900}, {0xed, 0x00000000}, + {0x82, 0x00080000}, {0x83, 0x00008000}, + {0x84, 0x00048d80}, {0x85, 0x00068000}, + {0xa2, 0x00080000}, {0xa3, 0x00008000}, + {0xa4, 0x00048d80}, {0xa5, 0x00068000}, + {0xed, 0x00000002}, {0xef, 0x00000002}, + {0x56, 0x00000032}, {0x76, 0x00000032}, + {0x01, 0x00000780}, + {0xff, 0xffffffff} +}; + static struct rtl8xxxu_rfregval rtl8192cu_radioa_2t_init_table[] = { {0x00, 0x00030159}, {0x01, 0x00031284}, {0x02, 0x00098000}, {0x03, 0x00018c63}, @@ -1166,6 +1441,11 @@ static u32 rtl8xxxu_read_rfreg(struct rtl8xxxu_priv *priv, return retval; } +/* + * The RTL8723BU driver indicates that registers 0xb2 and 0xb6 can + * have write issues in high temperature conditions. We may have to + * retry writing them. + */ static int rtl8xxxu_write_rfreg(struct rtl8xxxu_priv *priv, enum rtl8xxxu_rfpath path, u8 reg, u32 data) { @@ -1191,7 +1471,8 @@ static int rtl8xxxu_write_rfreg(struct rtl8xxxu_priv *priv, return retval; } -static int rtl8723a_h2c_cmd(struct rtl8xxxu_priv *priv, struct h2c_cmd *h2c) +static int rtl8723a_h2c_cmd(struct rtl8xxxu_priv *priv, + struct h2c_cmd *h2c, int len) { struct device *dev = &priv->udev->dev; int mbox_nr, retry, retval = 0; @@ -1202,7 +1483,8 @@ static int rtl8723a_h2c_cmd(struct rtl8xxxu_priv *priv, struct h2c_cmd *h2c) mbox_nr = priv->next_mbox; mbox_reg = REG_HMBOX_0 + (mbox_nr * 4); - mbox_ext_reg = REG_HMBOX_EXT_0 + (mbox_nr * 2); + mbox_ext_reg = priv->fops->mbox_ext_reg + + (mbox_nr * priv->fops->mbox_ext_width); /* * MBOX ready? @@ -1215,7 +1497,7 @@ static int rtl8723a_h2c_cmd(struct rtl8xxxu_priv *priv, struct h2c_cmd *h2c) } while (retry--); if (!retry) { - dev_dbg(dev, "%s: Mailbox busy\n", __func__); + dev_info(dev, "%s: Mailbox busy\n", __func__); retval = -EBUSY; goto error; } @@ -1223,12 +1505,20 @@ static int rtl8723a_h2c_cmd(struct rtl8xxxu_priv *priv, struct h2c_cmd *h2c) /* * Need to swap as it's being swapped again by rtl8xxxu_write16/32() */ - if (h2c->cmd.cmd & H2C_EXT) { - rtl8xxxu_write16(priv, mbox_ext_reg, - le16_to_cpu(h2c->raw.ext)); - if (rtl8xxxu_debug & RTL8XXXU_DEBUG_H2C) - dev_info(dev, "H2C_EXT %04x\n", - le16_to_cpu(h2c->raw.ext)); + if (len > sizeof(u32)) { + if (priv->fops->mbox_ext_width == 4) { + rtl8xxxu_write32(priv, mbox_ext_reg, + le32_to_cpu(h2c->raw_wide.ext)); + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_H2C) + dev_info(dev, "H2C_EXT %08x\n", + le32_to_cpu(h2c->raw_wide.ext)); + } else { + rtl8xxxu_write16(priv, mbox_ext_reg, + le16_to_cpu(h2c->raw.ext)); + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_H2C) + dev_info(dev, "H2C_EXT %04x\n", + le16_to_cpu(h2c->raw.ext)); + } } rtl8xxxu_write32(priv, mbox_reg, le32_to_cpu(h2c->raw.data)); if (rtl8xxxu_debug & RTL8XXXU_DEBUG_H2C) @@ -1241,6 +1531,27 @@ error: return retval; } +static void rtl8723bu_write_btreg(struct rtl8xxxu_priv *priv, u8 reg, u8 data) +{ + struct h2c_cmd h2c; + int reqnum = 0; + + memset(&h2c, 0, sizeof(struct h2c_cmd)); + h2c.bt_mp_oper.cmd = H2C_8723B_BT_MP_OPER; + h2c.bt_mp_oper.operreq = 0 | (reqnum << 4); + h2c.bt_mp_oper.opcode = BT_MP_OP_WRITE_REG_VALUE; + h2c.bt_mp_oper.data = data; + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_mp_oper)); + + reqnum++; + memset(&h2c, 0, sizeof(struct h2c_cmd)); + h2c.bt_mp_oper.cmd = H2C_8723B_BT_MP_OPER; + h2c.bt_mp_oper.operreq = 0 | (reqnum << 4); + h2c.bt_mp_oper.opcode = BT_MP_OP_WRITE_REG_VALUE; + h2c.bt_mp_oper.addr = reg; + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_mp_oper)); +} + static void rtl8723a_enable_rf(struct rtl8xxxu_priv *priv) { u8 val8; @@ -1365,6 +1676,24 @@ static int rtl8723a_channel_to_group(int channel) return group; } +static int rtl8723b_channel_to_group(int channel) +{ + int group; + + if (channel < 3) + group = 0; + else if (channel < 6) + group = 1; + else if (channel < 9) + group = 2; + else if (channel < 12) + group = 3; + else + group = 4; + + return group; +} + static void rtl8723au_config_channel(struct ieee80211_hw *hw) { struct rtl8xxxu_priv *priv = hw->priv; @@ -1487,6 +1816,136 @@ static void rtl8723au_config_channel(struct ieee80211_hw *hw) } } +static void rtl8723bu_config_channel(struct ieee80211_hw *hw) +{ + struct rtl8xxxu_priv *priv = hw->priv; + u32 val32, rsr; + u8 val8, subchannel; + u16 rf_mode_bw; + bool ht = true; + int sec_ch_above, channel; + int i; + + rf_mode_bw = rtl8xxxu_read16(priv, REG_WMAC_TRXPTCL_CTL); + rf_mode_bw &= ~WMAC_TRXPTCL_CTL_BW_MASK; + rsr = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET); + channel = hw->conf.chandef.chan->hw_value; + +/* Hack */ + subchannel = 0; + + switch (hw->conf.chandef.width) { + case NL80211_CHAN_WIDTH_20_NOHT: + ht = false; + case NL80211_CHAN_WIDTH_20: + rf_mode_bw |= WMAC_TRXPTCL_CTL_BW_20; + subchannel = 0; + + val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); + val32 &= ~FPGA_RF_MODE; + rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32); + + val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE); + val32 &= ~FPGA_RF_MODE; + rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32); + + val32 = rtl8xxxu_read32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT); + val32 &= ~(BIT(30) | BIT(31)); + rtl8xxxu_write32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT, val32); + + break; + case NL80211_CHAN_WIDTH_40: + rf_mode_bw |= WMAC_TRXPTCL_CTL_BW_40; + + if (hw->conf.chandef.center_freq1 > + hw->conf.chandef.chan->center_freq) { + sec_ch_above = 1; + channel += 2; + } else { + sec_ch_above = 0; + channel -= 2; + } + + val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); + val32 |= FPGA_RF_MODE; + rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32); + + val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE); + val32 |= FPGA_RF_MODE; + rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32); + + /* + * Set Control channel to upper or lower. These settings + * are required only for 40MHz + */ + val32 = rtl8xxxu_read32(priv, REG_CCK0_SYSTEM); + val32 &= ~CCK0_SIDEBAND; + if (!sec_ch_above) + val32 |= CCK0_SIDEBAND; + rtl8xxxu_write32(priv, REG_CCK0_SYSTEM, val32); + + val32 = rtl8xxxu_read32(priv, REG_OFDM1_LSTF); + val32 &= ~OFDM_LSTF_PRIME_CH_MASK; /* 0xc00 */ + if (sec_ch_above) + val32 |= OFDM_LSTF_PRIME_CH_LOW; + else + val32 |= OFDM_LSTF_PRIME_CH_HIGH; + rtl8xxxu_write32(priv, REG_OFDM1_LSTF, val32); + + val32 = rtl8xxxu_read32(priv, REG_FPGA0_POWER_SAVE); + val32 &= ~(FPGA0_PS_LOWER_CHANNEL | FPGA0_PS_UPPER_CHANNEL); + if (sec_ch_above) + val32 |= FPGA0_PS_UPPER_CHANNEL; + else + val32 |= FPGA0_PS_LOWER_CHANNEL; + rtl8xxxu_write32(priv, REG_FPGA0_POWER_SAVE, val32); + break; + case NL80211_CHAN_WIDTH_80: + rf_mode_bw |= WMAC_TRXPTCL_CTL_BW_80; + break; + default: + break; + } + + for (i = RF_A; i < priv->rf_paths; i++) { + val32 = rtl8xxxu_read_rfreg(priv, i, RF6052_REG_MODE_AG); + val32 &= ~MODE_AG_CHANNEL_MASK; + val32 |= channel; + rtl8xxxu_write_rfreg(priv, i, RF6052_REG_MODE_AG, val32); + } + + rtl8xxxu_write16(priv, REG_WMAC_TRXPTCL_CTL, rf_mode_bw); + rtl8xxxu_write8(priv, REG_DATA_SUBCHANNEL, subchannel); + + if (ht) + val8 = 0x0e; + else + val8 = 0x0a; + + rtl8xxxu_write8(priv, REG_SIFS_CCK + 1, val8); + rtl8xxxu_write8(priv, REG_SIFS_OFDM + 1, val8); + + rtl8xxxu_write16(priv, REG_R2T_SIFS, 0x0808); + rtl8xxxu_write16(priv, REG_T2T_SIFS, 0x0a0a); + + for (i = RF_A; i < priv->rf_paths; i++) { + val32 = rtl8xxxu_read_rfreg(priv, i, RF6052_REG_MODE_AG); + val32 &= ~MODE_AG_BW_MASK; + switch(hw->conf.chandef.width) { + case NL80211_CHAN_WIDTH_80: + val32 |= MODE_AG_BW_80MHZ_8723B; + break; + case NL80211_CHAN_WIDTH_40: + val32 |= MODE_AG_BW_40MHZ_8723B; + break; + default: + val32 |= MODE_AG_BW_20MHZ_8723B; + break; + } + rtl8xxxu_write_rfreg(priv, i, RF6052_REG_MODE_AG, val32); + } +} + static void rtl8723a_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40) { @@ -1596,12 +2055,51 @@ rtl8723a_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40) } } +static void +rtl8723b_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40) +{ + u32 val32, ofdm, mcs; + u8 cck, ofdmbase, mcsbase; + int group, tx_idx; + + tx_idx = 0; + group = rtl8723b_channel_to_group(channel); + + cck = priv->cck_tx_power_index_B[group]; + val32 = rtl8xxxu_read32(priv, REG_TX_AGC_A_CCK1_MCS32); + val32 &= 0xffff00ff; + val32 |= (cck << 8); + rtl8xxxu_write32(priv, REG_TX_AGC_A_CCK1_MCS32, val32); + + val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11); + val32 &= 0xff; + val32 |= ((cck << 8) | (cck << 16) | (cck << 24)); + rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32); + + ofdmbase = priv->ht40_1s_tx_power_index_B[group]; + ofdmbase += priv->ofdm_tx_power_diff[tx_idx].b; + ofdm = ofdmbase | ofdmbase << 8 | ofdmbase << 16 | ofdmbase << 24; + + rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE18_06, ofdm); + rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE54_24, ofdm); + + mcsbase = priv->ht40_1s_tx_power_index_B[group]; + if (ht40) + mcsbase += priv->ht40_tx_power_diff[tx_idx++].b; + else + mcsbase += priv->ht20_tx_power_diff[tx_idx++].b; + mcs = mcsbase | mcsbase << 8 | mcsbase << 16 | mcsbase << 24; + + rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS03_MCS00, mcs); + rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS07_MCS04, mcs); +} + static void rtl8xxxu_set_linktype(struct rtl8xxxu_priv *priv, enum nl80211_iftype linktype) { - u16 val8; + u8 val8; - val8 = rtl8xxxu_read16(priv, REG_MSR); + val8 = rtl8xxxu_read8(priv, REG_MSR); val8 &= ~MSR_LINKTYPE_MASK; switch (linktype) { @@ -1662,16 +2160,24 @@ static void rtl8xxxu_print_chipinfo(struct rtl8xxxu_priv *priv) case 1: cut = "B"; break; + case 2: + cut = "C"; + break; + case 3: + cut = "D"; + break; + case 4: + cut = "E"; + break; default: cut = "unknown"; } dev_info(dev, "RTL%s rev %s (%s) %iT%iR, TX queues %i, WiFi=%i, BT=%i, GPS=%i, HI PA=%i\n", - priv->chip_name, cut, priv->vendor_umc ? "UMC" : "TSMC", - priv->tx_paths, priv->rx_paths, priv->ep_tx_count, - priv->has_wifi, priv->has_bluetooth, priv->has_gps, - priv->hi_pa); + priv->chip_name, cut, priv->chip_vendor, priv->tx_paths, + priv->rx_paths, priv->ep_tx_count, priv->has_wifi, + priv->has_bluetooth, priv->has_gps, priv->hi_pa); dev_info(dev, "RTL%s MAC: %pM\n", priv->chip_name, priv->mac_addr); } @@ -1691,11 +2197,18 @@ static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv) } if (val32 & SYS_CFG_BT_FUNC) { - sprintf(priv->chip_name, "8723AU"); + if (priv->chip_cut >= 3) { + sprintf(priv->chip_name, "8723BU"); + priv->rtlchip = 0x8723b; + } else { + sprintf(priv->chip_name, "8723AU"); + priv->usb_interrupts = 1; + priv->rtlchip = 0x8723a; + } + priv->rf_paths = 1; priv->rx_paths = 1; priv->tx_paths = 1; - priv->rtlchip = 0x8723a; val32 = rtl8xxxu_read32(priv, REG_MULTI_FUNC_CTRL); if (val32 & MULTI_WIFI_FUNC_EN) @@ -1704,20 +2217,37 @@ static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv) priv->has_bluetooth = 1; if (val32 & MULTI_GPS_FUNC_EN) priv->has_gps = 1; + priv->is_multi_func = 1; } else if (val32 & SYS_CFG_TYPE_ID) { bonding = rtl8xxxu_read32(priv, REG_HPON_FSM); bonding &= HPON_FSM_BONDING_MASK; - if (bonding == HPON_FSM_BONDING_1T2R) { + if (priv->chip_cut >= 3) { + if (bonding == HPON_FSM_BONDING_1T2R) { + sprintf(priv->chip_name, "8191EU"); + priv->rf_paths = 2; + priv->rx_paths = 2; + priv->tx_paths = 1; + priv->rtlchip = 0x8191e; + } else { + sprintf(priv->chip_name, "8192EU"); + priv->rf_paths = 2; + priv->rx_paths = 2; + priv->tx_paths = 2; + priv->rtlchip = 0x8192e; + } + } else if (bonding == HPON_FSM_BONDING_1T2R) { sprintf(priv->chip_name, "8191CU"); priv->rf_paths = 2; priv->rx_paths = 2; priv->tx_paths = 1; + priv->usb_interrupts = 1; priv->rtlchip = 0x8191c; } else { sprintf(priv->chip_name, "8192CU"); priv->rf_paths = 2; priv->rx_paths = 2; priv->tx_paths = 2; + priv->usb_interrupts = 1; priv->rtlchip = 0x8192c; } priv->has_wifi = 1; @@ -1727,11 +2257,38 @@ static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv) priv->rx_paths = 1; priv->tx_paths = 1; priv->rtlchip = 0x8188c; + priv->usb_interrupts = 1; priv->has_wifi = 1; } - if (val32 & SYS_CFG_VENDOR_ID) - priv->vendor_umc = 1; + switch (priv->rtlchip) { + case 0x8188e: + case 0x8192e: + case 0x8723b: + switch (val32 & SYS_CFG_VENDOR_EXT_MASK) { + case SYS_CFG_VENDOR_ID_TSMC: + sprintf(priv->chip_vendor, "TSMC"); + break; + case SYS_CFG_VENDOR_ID_SMIC: + sprintf(priv->chip_vendor, "SMIC"); + priv->vendor_smic = 1; + break; + case SYS_CFG_VENDOR_ID_UMC: + sprintf(priv->chip_vendor, "UMC"); + priv->vendor_umc = 1; + break; + default: + sprintf(priv->chip_vendor, "unknown"); + } + break; + default: + if (val32 & SYS_CFG_VENDOR_ID) { + sprintf(priv->chip_vendor, "UMC"); + priv->vendor_umc = 1; + } else { + sprintf(priv->chip_vendor, "TSMC"); + } + } val32 = rtl8xxxu_read32(priv, REG_GPIO_OUTSTS); priv->rom_rev = (val32 & GPIO_RF_RL_ID) >> 28; @@ -1757,6 +2314,7 @@ static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv) */ if (!priv->ep_tx_count) { switch (priv->nr_out_eps) { + case 4: case 3: priv->ep_tx_low_queue = 1; priv->ep_tx_count++; @@ -1778,43 +2336,126 @@ static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv) static int rtl8723au_parse_efuse(struct rtl8xxxu_priv *priv) { - if (priv->efuse_wifi.efuse8723.rtl_id != cpu_to_le16(0x8129)) + struct rtl8723au_efuse *efuse = &priv->efuse_wifi.efuse8723; + + if (efuse->rtl_id != cpu_to_le16(0x8129)) return -EINVAL; - ether_addr_copy(priv->mac_addr, priv->efuse_wifi.efuse8723.mac_addr); + ether_addr_copy(priv->mac_addr, efuse->mac_addr); memcpy(priv->cck_tx_power_index_A, - priv->efuse_wifi.efuse8723.cck_tx_power_index_A, - sizeof(priv->cck_tx_power_index_A)); + efuse->cck_tx_power_index_A, + sizeof(efuse->cck_tx_power_index_A)); memcpy(priv->cck_tx_power_index_B, - priv->efuse_wifi.efuse8723.cck_tx_power_index_B, - sizeof(priv->cck_tx_power_index_B)); + efuse->cck_tx_power_index_B, + sizeof(efuse->cck_tx_power_index_B)); memcpy(priv->ht40_1s_tx_power_index_A, - priv->efuse_wifi.efuse8723.ht40_1s_tx_power_index_A, - sizeof(priv->ht40_1s_tx_power_index_A)); + efuse->ht40_1s_tx_power_index_A, + sizeof(efuse->ht40_1s_tx_power_index_A)); memcpy(priv->ht40_1s_tx_power_index_B, - priv->efuse_wifi.efuse8723.ht40_1s_tx_power_index_B, - sizeof(priv->ht40_1s_tx_power_index_B)); + efuse->ht40_1s_tx_power_index_B, + sizeof(efuse->ht40_1s_tx_power_index_B)); memcpy(priv->ht20_tx_power_index_diff, - priv->efuse_wifi.efuse8723.ht20_tx_power_index_diff, - sizeof(priv->ht20_tx_power_index_diff)); + efuse->ht20_tx_power_index_diff, + sizeof(efuse->ht20_tx_power_index_diff)); memcpy(priv->ofdm_tx_power_index_diff, - priv->efuse_wifi.efuse8723.ofdm_tx_power_index_diff, - sizeof(priv->ofdm_tx_power_index_diff)); + efuse->ofdm_tx_power_index_diff, + sizeof(efuse->ofdm_tx_power_index_diff)); memcpy(priv->ht40_max_power_offset, - priv->efuse_wifi.efuse8723.ht40_max_power_offset, - sizeof(priv->ht40_max_power_offset)); + efuse->ht40_max_power_offset, + sizeof(efuse->ht40_max_power_offset)); memcpy(priv->ht20_max_power_offset, - priv->efuse_wifi.efuse8723.ht20_max_power_offset, - sizeof(priv->ht20_max_power_offset)); + efuse->ht20_max_power_offset, + sizeof(efuse->ht20_max_power_offset)); + if (priv->efuse_wifi.efuse8723.version >= 0x01) { + priv->has_xtalk = 1; + priv->xtalk = priv->efuse_wifi.efuse8723.xtal_k & 0x3f; + } dev_info(&priv->udev->dev, "Vendor: %.7s\n", - priv->efuse_wifi.efuse8723.vendor_name); + efuse->vendor_name); dev_info(&priv->udev->dev, "Product: %.41s\n", - priv->efuse_wifi.efuse8723.device_name); + efuse->device_name); + return 0; +} + +static int rtl8723bu_parse_efuse(struct rtl8xxxu_priv *priv) +{ + struct rtl8723bu_efuse *efuse = &priv->efuse_wifi.efuse8723bu; + int i; + + if (efuse->rtl_id != cpu_to_le16(0x8129)) + return -EINVAL; + + ether_addr_copy(priv->mac_addr, efuse->mac_addr); + + memcpy(priv->cck_tx_power_index_A, efuse->tx_power_index_A.cck_base, + sizeof(efuse->tx_power_index_A.cck_base)); + memcpy(priv->cck_tx_power_index_B, efuse->tx_power_index_B.cck_base, + sizeof(efuse->tx_power_index_B.cck_base)); + + memcpy(priv->ht40_1s_tx_power_index_A, + efuse->tx_power_index_A.ht40_base, + sizeof(efuse->tx_power_index_A.ht40_base)); + memcpy(priv->ht40_1s_tx_power_index_B, + efuse->tx_power_index_B.ht40_base, + sizeof(efuse->tx_power_index_B.ht40_base)); + + priv->ofdm_tx_power_diff[0].a = + efuse->tx_power_index_A.ht20_ofdm_1s_diff.a; + priv->ofdm_tx_power_diff[0].b = + efuse->tx_power_index_B.ht20_ofdm_1s_diff.a; + + priv->ht20_tx_power_diff[0].a = + efuse->tx_power_index_A.ht20_ofdm_1s_diff.b; + priv->ht20_tx_power_diff[0].b = + efuse->tx_power_index_B.ht20_ofdm_1s_diff.b; + + priv->ht40_tx_power_diff[0].a = 0; + priv->ht40_tx_power_diff[0].b = 0; + + for (i = 1; i < RTL8723B_TX_COUNT; i++) { + priv->ofdm_tx_power_diff[i].a = + efuse->tx_power_index_A.pwr_diff[i - 1].ofdm; + priv->ofdm_tx_power_diff[i].b = + efuse->tx_power_index_B.pwr_diff[i - 1].ofdm; + + priv->ht20_tx_power_diff[i].a = + efuse->tx_power_index_A.pwr_diff[i - 1].ht20; + priv->ht20_tx_power_diff[i].b = + efuse->tx_power_index_B.pwr_diff[i - 1].ht20; + + priv->ht40_tx_power_diff[i].a = + efuse->tx_power_index_A.pwr_diff[i - 1].ht40; + priv->ht40_tx_power_diff[i].b = + efuse->tx_power_index_B.pwr_diff[i - 1].ht40; + } + + priv->has_xtalk = 1; + priv->xtalk = priv->efuse_wifi.efuse8723bu.xtal_k & 0x3f; + + dev_info(&priv->udev->dev, "Vendor: %.7s\n", efuse->vendor_name); + dev_info(&priv->udev->dev, "Product: %.41s\n", efuse->device_name); + + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_EFUSE) { + int i; + unsigned char *raw = priv->efuse_wifi.raw; + + dev_info(&priv->udev->dev, + "%s: dumping efuse (0x%02zx bytes):\n", + __func__, sizeof(struct rtl8723bu_efuse)); + for (i = 0; i < sizeof(struct rtl8723bu_efuse); i += 8) { + dev_info(&priv->udev->dev, "%02x: " + "%02x %02x %02x %02x %02x %02x %02x %02x\n", i, + raw[i], raw[i + 1], raw[i + 2], + raw[i + 3], raw[i + 4], raw[i + 5], + raw[i + 6], raw[i + 7]); + } + } + return 0; } @@ -1822,50 +2463,51 @@ static int rtl8723au_parse_efuse(struct rtl8xxxu_priv *priv) static int rtl8192cu_parse_efuse(struct rtl8xxxu_priv *priv) { + struct rtl8192cu_efuse *efuse = &priv->efuse_wifi.efuse8192; int i; - if (priv->efuse_wifi.efuse8192.rtl_id != cpu_to_le16(0x8129)) + if (efuse->rtl_id != cpu_to_le16(0x8129)) return -EINVAL; - ether_addr_copy(priv->mac_addr, priv->efuse_wifi.efuse8192.mac_addr); + ether_addr_copy(priv->mac_addr, efuse->mac_addr); memcpy(priv->cck_tx_power_index_A, - priv->efuse_wifi.efuse8192.cck_tx_power_index_A, - sizeof(priv->cck_tx_power_index_A)); + efuse->cck_tx_power_index_A, + sizeof(efuse->cck_tx_power_index_A)); memcpy(priv->cck_tx_power_index_B, - priv->efuse_wifi.efuse8192.cck_tx_power_index_B, - sizeof(priv->cck_tx_power_index_B)); + efuse->cck_tx_power_index_B, + sizeof(efuse->cck_tx_power_index_B)); memcpy(priv->ht40_1s_tx_power_index_A, - priv->efuse_wifi.efuse8192.ht40_1s_tx_power_index_A, - sizeof(priv->ht40_1s_tx_power_index_A)); + efuse->ht40_1s_tx_power_index_A, + sizeof(efuse->ht40_1s_tx_power_index_A)); memcpy(priv->ht40_1s_tx_power_index_B, - priv->efuse_wifi.efuse8192.ht40_1s_tx_power_index_B, - sizeof(priv->ht40_1s_tx_power_index_B)); + efuse->ht40_1s_tx_power_index_B, + sizeof(efuse->ht40_1s_tx_power_index_B)); memcpy(priv->ht40_2s_tx_power_index_diff, - priv->efuse_wifi.efuse8192.ht40_2s_tx_power_index_diff, - sizeof(priv->ht40_2s_tx_power_index_diff)); + efuse->ht40_2s_tx_power_index_diff, + sizeof(efuse->ht40_2s_tx_power_index_diff)); memcpy(priv->ht20_tx_power_index_diff, - priv->efuse_wifi.efuse8192.ht20_tx_power_index_diff, - sizeof(priv->ht20_tx_power_index_diff)); + efuse->ht20_tx_power_index_diff, + sizeof(efuse->ht20_tx_power_index_diff)); memcpy(priv->ofdm_tx_power_index_diff, - priv->efuse_wifi.efuse8192.ofdm_tx_power_index_diff, - sizeof(priv->ofdm_tx_power_index_diff)); + efuse->ofdm_tx_power_index_diff, + sizeof(efuse->ofdm_tx_power_index_diff)); memcpy(priv->ht40_max_power_offset, - priv->efuse_wifi.efuse8192.ht40_max_power_offset, - sizeof(priv->ht40_max_power_offset)); + efuse->ht40_max_power_offset, + sizeof(efuse->ht40_max_power_offset)); memcpy(priv->ht20_max_power_offset, - priv->efuse_wifi.efuse8192.ht20_max_power_offset, - sizeof(priv->ht20_max_power_offset)); + efuse->ht20_max_power_offset, + sizeof(efuse->ht20_max_power_offset)); dev_info(&priv->udev->dev, "Vendor: %.7s\n", - priv->efuse_wifi.efuse8192.vendor_name); + efuse->vendor_name); dev_info(&priv->udev->dev, "Product: %.20s\n", - priv->efuse_wifi.efuse8192.device_name); + efuse->device_name); - if (priv->efuse_wifi.efuse8192.rf_regulatory & 0x20) { + if (efuse->rf_regulatory & 0x20) { sprintf(priv->chip_name, "8188RU"); priv->hi_pa = 1; } @@ -1889,6 +2531,44 @@ static int rtl8192cu_parse_efuse(struct rtl8xxxu_priv *priv) #endif +static int rtl8192eu_parse_efuse(struct rtl8xxxu_priv *priv) +{ + struct rtl8192eu_efuse *efuse = &priv->efuse_wifi.efuse8192eu; + int i; + + if (efuse->rtl_id != cpu_to_le16(0x8129)) + return -EINVAL; + + ether_addr_copy(priv->mac_addr, efuse->mac_addr); + + priv->has_xtalk = 1; + priv->xtalk = priv->efuse_wifi.efuse8192eu.xtal_k & 0x3f; + + dev_info(&priv->udev->dev, "Vendor: %.7s\n", efuse->vendor_name); + dev_info(&priv->udev->dev, "Product: %.11s\n", efuse->device_name); + dev_info(&priv->udev->dev, "Serial: %.11s\n", efuse->serial); + + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_EFUSE) { + unsigned char *raw = priv->efuse_wifi.raw; + + dev_info(&priv->udev->dev, + "%s: dumping efuse (0x%02zx bytes):\n", + __func__, sizeof(struct rtl8192eu_efuse)); + for (i = 0; i < sizeof(struct rtl8192eu_efuse); i += 8) { + dev_info(&priv->udev->dev, "%02x: " + "%02x %02x %02x %02x %02x %02x %02x %02x\n", i, + raw[i], raw[i + 1], raw[i + 2], + raw[i + 3], raw[i + 4], raw[i + 5], + raw[i + 6], raw[i + 7]); + } + } + /* + * Temporarily disable 8192eu support + */ + return -EINVAL; + return 0; +} + static int rtl8xxxu_read_efuse8(struct rtl8xxxu_priv *priv, u16 offset, u8 *data) { @@ -1938,9 +2618,11 @@ static int rtl8xxxu_read_efuse(struct rtl8xxxu_priv *priv) if (val16 & EEPROM_BOOT) priv->boot_eeprom = 1; - val32 = rtl8xxxu_read32(priv, REG_EFUSE_TEST); - val32 = (val32 & ~EFUSE_SELECT_MASK) | EFUSE_WIFI_SELECT; - rtl8xxxu_write32(priv, REG_EFUSE_TEST, val32); + if (priv->is_multi_func) { + val32 = rtl8xxxu_read32(priv, REG_EFUSE_TEST); + val32 = (val32 & ~EFUSE_SELECT_MASK) | EFUSE_WIFI_SELECT; + rtl8xxxu_write32(priv, REG_EFUSE_TEST, val32); + } dev_dbg(dev, "Booting from %s\n", priv->boot_eeprom ? "EEPROM" : "EFUSE"); @@ -1970,10 +2652,12 @@ static int rtl8xxxu_read_efuse(struct rtl8xxxu_priv *priv) } /* Default value is 0xff */ - memset(priv->efuse_wifi.raw, 0xff, EFUSE_MAP_LEN_8723A); + memset(priv->efuse_wifi.raw, 0xff, EFUSE_MAP_LEN); efuse_addr = 0; while (efuse_addr < EFUSE_REAL_CONTENT_LEN_8723A) { + u16 map_addr; + ret = rtl8xxxu_read_efuse8(priv, efuse_addr++, &header); if (ret || header == 0xff) goto exit; @@ -1996,45 +2680,34 @@ static int rtl8xxxu_read_efuse(struct rtl8xxxu_priv *priv) word_mask = header & 0x0f; } - if (offset < EFUSE_MAX_SECTION_8723A) { - u16 map_addr; - /* Get word enable value from PG header */ + /* Get word enable value from PG header */ - /* We have 8 bits to indicate validity */ - map_addr = offset * 8; - if (map_addr >= EFUSE_MAP_LEN_8723A) { - dev_warn(dev, "%s: Illegal map_addr (%04x), " - "efuse corrupt!\n", - __func__, map_addr); - ret = -EINVAL; - goto exit; - } - for (i = 0; i < EFUSE_MAX_WORD_UNIT; i++) { - /* Check word enable condition in the section */ - if (!(word_mask & BIT(i))) { - ret = rtl8xxxu_read_efuse8(priv, - efuse_addr++, - &val8); - if (ret) - goto exit; - priv->efuse_wifi.raw[map_addr++] = val8; - - ret = rtl8xxxu_read_efuse8(priv, - efuse_addr++, - &val8); - if (ret) - goto exit; - priv->efuse_wifi.raw[map_addr++] = val8; - } else - map_addr += 2; - } - } else { - dev_warn(dev, - "%s: Illegal offset (%04x), efuse corrupt!\n", - __func__, offset); + /* We have 8 bits to indicate validity */ + map_addr = offset * 8; + if (map_addr >= EFUSE_MAP_LEN) { + dev_warn(dev, "%s: Illegal map_addr (%04x), " + "efuse corrupt!\n", + __func__, map_addr); ret = -EINVAL; goto exit; } + for (i = 0; i < EFUSE_MAX_WORD_UNIT; i++) { + /* Check word enable condition in the section */ + if (word_mask & BIT(i)) { + map_addr += 2; + continue; + } + + ret = rtl8xxxu_read_efuse8(priv, efuse_addr++, &val8); + if (ret) + goto exit; + priv->efuse_wifi.raw[map_addr++] = val8; + + ret = rtl8xxxu_read_efuse8(priv, efuse_addr++, &val8); + if (ret) + goto exit; + priv->efuse_wifi.raw[map_addr++] = val8; + } } exit: @@ -2043,6 +2716,56 @@ exit: return ret; } +static void rtl8xxxu_reset_8051(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u16 sys_func; + + val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1); + val8 &= ~BIT(0); + rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8); + + sys_func = rtl8xxxu_read16(priv, REG_SYS_FUNC); + sys_func &= ~SYS_FUNC_CPU_ENABLE; + rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func); + + val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1); + val8 |= BIT(0); + rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8); + + sys_func |= SYS_FUNC_CPU_ENABLE; + rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func); +} + +static void rtl8723bu_reset_8051(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u16 sys_func; + + val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL); + val8 &= ~BIT(1); + rtl8xxxu_write8(priv, REG_RSV_CTRL, val8); + + val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1); + val8 &= ~BIT(0); + rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8); + + sys_func = rtl8xxxu_read16(priv, REG_SYS_FUNC); + sys_func &= ~SYS_FUNC_CPU_ENABLE; + rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func); + + val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL); + val8 &= ~BIT(1); + rtl8xxxu_write8(priv, REG_RSV_CTRL, val8); + + val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1); + val8 |= BIT(0); + rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8); + + sys_func |= SYS_FUNC_CPU_ENABLE; + rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func); +} + static int rtl8xxxu_start_firmware(struct rtl8xxxu_priv *priv) { struct device *dev = &priv->udev->dev; @@ -2067,6 +2790,12 @@ static int rtl8xxxu_start_firmware(struct rtl8xxxu_priv *priv) val32 &= ~MCU_WINT_INIT_READY; rtl8xxxu_write32(priv, REG_MCU_FW_DL, val32); + /* + * Reset the 8051 in order for the firmware to start running, + * otherwise it won't come up on the 8192eu + */ + priv->fops->reset_8051(priv); + /* Wait for firmware to become ready */ for (i = 0; i < RTL8XXXU_FIRMWARE_POLL_MAX; i++) { val32 = rtl8xxxu_read32(priv, REG_MCU_FW_DL); @@ -2082,6 +2811,11 @@ static int rtl8xxxu_start_firmware(struct rtl8xxxu_priv *priv) goto exit; } + /* + * Init H2C command + */ + if (priv->rtlchip == 0x8723b) + rtl8xxxu_write8(priv, REG_HMTFR, 0x0f); exit: return ret; } @@ -2100,19 +2834,30 @@ static int rtl8xxxu_download_firmware(struct rtl8xxxu_priv *priv) /* 8051 enable */ val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); - rtl8xxxu_write16(priv, REG_SYS_FUNC, val16 | SYS_FUNC_CPU_ENABLE); + val16 |= SYS_FUNC_CPU_ENABLE; + rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); + + val8 = rtl8xxxu_read8(priv, REG_MCU_FW_DL); + if (val8 & MCU_FW_RAM_SEL) { + pr_info("do the RAM reset\n"); + rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00); + priv->fops->reset_8051(priv); + } /* MCU firmware download enable */ val8 = rtl8xxxu_read8(priv, REG_MCU_FW_DL); - rtl8xxxu_write8(priv, REG_MCU_FW_DL, val8 | MCU_FW_DL_ENABLE); + val8 |= MCU_FW_DL_ENABLE; + rtl8xxxu_write8(priv, REG_MCU_FW_DL, val8); /* 8051 reset */ val32 = rtl8xxxu_read32(priv, REG_MCU_FW_DL); - rtl8xxxu_write32(priv, REG_MCU_FW_DL, val32 & ~BIT(19)); + val32 &= ~BIT(19); + rtl8xxxu_write32(priv, REG_MCU_FW_DL, val32); /* Reset firmware download checksum */ val8 = rtl8xxxu_read8(priv, REG_MCU_FW_DL); - rtl8xxxu_write8(priv, REG_MCU_FW_DL, val8 | MCU_FW_DL_CSUM_REPORT); + val8 |= MCU_FW_DL_CSUM_REPORT; + rtl8xxxu_write8(priv, REG_MCU_FW_DL, val8); pages = priv->fw_size / RTL_FW_PAGE_SIZE; remainder = priv->fw_size % RTL_FW_PAGE_SIZE; @@ -2121,7 +2866,8 @@ static int rtl8xxxu_download_firmware(struct rtl8xxxu_priv *priv) for (i = 0; i < pages; i++) { val8 = rtl8xxxu_read8(priv, REG_MCU_FW_DL + 2) & 0xF8; - rtl8xxxu_write8(priv, REG_MCU_FW_DL + 2, val8 | i); + val8 |= i; + rtl8xxxu_write8(priv, REG_MCU_FW_DL + 2, val8); ret = rtl8xxxu_writeN(priv, REG_FW_START_ADDRESS, fwptr, RTL_FW_PAGE_SIZE); @@ -2135,7 +2881,8 @@ static int rtl8xxxu_download_firmware(struct rtl8xxxu_priv *priv) if (remainder) { val8 = rtl8xxxu_read8(priv, REG_MCU_FW_DL + 2) & 0xF8; - rtl8xxxu_write8(priv, REG_MCU_FW_DL + 2, val8 | i); + val8 |= i; + rtl8xxxu_write8(priv, REG_MCU_FW_DL + 2, val8); ret = rtl8xxxu_writeN(priv, REG_FW_START_ADDRESS, fwptr, remainder); if (ret != remainder) { @@ -2148,8 +2895,8 @@ static int rtl8xxxu_download_firmware(struct rtl8xxxu_priv *priv) fw_abort: /* MCU firmware download disable */ val16 = rtl8xxxu_read16(priv, REG_MCU_FW_DL); - rtl8xxxu_write16(priv, REG_MCU_FW_DL, - val16 & (~MCU_FW_DL_ENABLE & 0xff)); + val16 &= ~MCU_FW_DL_ENABLE; + rtl8xxxu_write16(priv, REG_MCU_FW_DL, val16); return ret; } @@ -2174,12 +2921,18 @@ static int rtl8xxxu_load_firmware(struct rtl8xxxu_priv *priv, char *fw_name) } priv->fw_data = kmemdup(fw->data, fw->size, GFP_KERNEL); + if (!priv->fw_data) { + ret = -ENOMEM; + goto exit; + } priv->fw_size = fw->size - sizeof(struct rtl8xxxu_firmware_header); signature = le16_to_cpu(priv->fw_data->signature); switch (signature & 0xfff0) { + case 0x92e0: case 0x92c0: case 0x88c0: + case 0x5300: case 0x2300: break; default: @@ -2221,6 +2974,20 @@ static int rtl8723au_load_firmware(struct rtl8xxxu_priv *priv) return ret; } +static int rtl8723bu_load_firmware(struct rtl8xxxu_priv *priv) +{ + char *fw_name; + int ret; + + if (priv->enable_bluetooth) + fw_name = "rtlwifi/rtl8723bu_bt.bin"; + else + fw_name = "rtlwifi/rtl8723bu_nic.bin"; + + ret = rtl8xxxu_load_firmware(priv, fw_name); + return ret; +} + #ifdef CONFIG_RTL8XXXU_UNTESTED static int rtl8192cu_load_firmware(struct rtl8xxxu_priv *priv) @@ -2242,6 +3009,18 @@ static int rtl8192cu_load_firmware(struct rtl8xxxu_priv *priv) #endif +static int rtl8192eu_load_firmware(struct rtl8xxxu_priv *priv) +{ + char *fw_name; + int ret; + + fw_name = "rtlwifi/rtl8192eu_nic.bin"; + + ret = rtl8xxxu_load_firmware(priv, fw_name); + + return ret; +} + static void rtl8xxxu_firmware_self_reset(struct rtl8xxxu_priv *priv) { u16 val16; @@ -2269,6 +3048,44 @@ static void rtl8xxxu_firmware_self_reset(struct rtl8xxxu_priv *priv) } } +static void rtl8723bu_phy_init_antenna_selection(struct rtl8xxxu_priv *priv) +{ + u32 val32; + + val32 = rtl8xxxu_read32(priv, 0x64); + val32 &= ~(BIT(20) | BIT(24)); + rtl8xxxu_write32(priv, 0x64, val32); + + val32 = rtl8xxxu_read32(priv, REG_GPIO_MUXCFG); + val32 &= ~BIT(4); + rtl8xxxu_write32(priv, REG_GPIO_MUXCFG, val32); + + val32 = rtl8xxxu_read32(priv, REG_GPIO_MUXCFG); + val32 |= BIT(3); + rtl8xxxu_write32(priv, REG_GPIO_MUXCFG, val32); + + val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); + val32 |= BIT(24); + rtl8xxxu_write32(priv, REG_LEDCFG0, val32); + + val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); + val32 &= ~BIT(23); + rtl8xxxu_write32(priv, REG_LEDCFG0, val32); + + val32 = rtl8xxxu_read32(priv, REG_RFE_BUFFER); + val32 |= (BIT(0) | BIT(1)); + rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32); + + val32 = rtl8xxxu_read32(priv, REG_RFE_CTRL_ANTA_SRC); + val32 &= 0xffffff00; + val32 |= 0x77; + rtl8xxxu_write32(priv, REG_RFE_CTRL_ANTA_SRC, val32); + + val32 = rtl8xxxu_read32(priv, REG_PWR_DATA); + val32 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN; + rtl8xxxu_write32(priv, REG_PWR_DATA, val32); +} + static int rtl8xxxu_init_mac(struct rtl8xxxu_priv *priv, struct rtl8xxxu_reg8val *array) { @@ -2291,7 +3108,8 @@ rtl8xxxu_init_mac(struct rtl8xxxu_priv *priv, struct rtl8xxxu_reg8val *array) } } - rtl8xxxu_write8(priv, REG_MAX_AGGR_NUM, 0x0a); + if (priv->rtlchip != 0x8723b) + rtl8xxxu_write8(priv, REG_MAX_AGGR_NUM, 0x0a); return 0; } @@ -2328,6 +3146,7 @@ static int rtl8xxxu_init_phy_regs(struct rtl8xxxu_priv *priv, static int rtl8xxxu_init_phy_bb(struct rtl8xxxu_priv *priv) { u8 val8, ldoa15, ldov12d, lpldo, ldohci12; + u16 val16; u32 val32; /* @@ -2335,25 +3154,36 @@ static int rtl8xxxu_init_phy_bb(struct rtl8xxxu_priv *priv) * addresses, which is initialized here. Do we need this? */ - val8 = rtl8xxxu_read8(priv, REG_AFE_PLL_CTRL); - udelay(2); - val8 |= AFE_PLL_320_ENABLE; - rtl8xxxu_write8(priv, REG_AFE_PLL_CTRL, val8); - udelay(2); + if (priv->rtlchip == 0x8723b) { + val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); + val16 |= SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB | + SYS_FUNC_DIO_RF; + rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); - rtl8xxxu_write8(priv, REG_AFE_PLL_CTRL + 1, 0xff); - udelay(2); + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00); + } else { + val8 = rtl8xxxu_read8(priv, REG_AFE_PLL_CTRL); + udelay(2); + val8 |= AFE_PLL_320_ENABLE; + rtl8xxxu_write8(priv, REG_AFE_PLL_CTRL, val8); + udelay(2); - val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC); - val8 |= SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB; - rtl8xxxu_write8(priv, REG_SYS_FUNC, val8); + rtl8xxxu_write8(priv, REG_AFE_PLL_CTRL + 1, 0xff); + udelay(2); + + val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); + val16 |= SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB; + rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); + } - /* AFE_XTAL_RF_GATE (bit 14) if addressing as 32 bit register */ - val32 = rtl8xxxu_read32(priv, REG_AFE_XTAL_CTRL); - val32 &= ~AFE_XTAL_RF_GATE; - if (priv->has_bluetooth) - val32 &= ~AFE_XTAL_BT_GATE; - rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, val32); + if (priv->rtlchip != 0x8723b) { + /* AFE_XTAL_RF_GATE (bit 14) if addressing as 32 bit register */ + val32 = rtl8xxxu_read32(priv, REG_AFE_XTAL_CTRL); + val32 &= ~AFE_XTAL_RF_GATE; + if (priv->has_bluetooth) + val32 &= ~AFE_XTAL_BT_GATE; + rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, val32); + } /* 6. 0x1f[7:0] = 0x07 */ val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB; @@ -2363,7 +3193,14 @@ static int rtl8xxxu_init_phy_bb(struct rtl8xxxu_priv *priv) rtl8xxxu_init_phy_regs(priv, rtl8188ru_phy_1t_highpa_table); else if (priv->tx_paths == 2) rtl8xxxu_init_phy_regs(priv, rtl8192cu_phy_2t_init_table); - else + else if (priv->rtlchip == 0x8723b) { + /* + * Why? + */ + rtl8xxxu_write8(priv, REG_SYS_FUNC, 0xe3); + rtl8xxxu_write8(priv, REG_AFE_XTAL_CTRL + 1, 0x80); + rtl8xxxu_init_phy_regs(priv, rtl8723b_phy_1t_init_table); + } else rtl8xxxu_init_phy_regs(priv, rtl8723a_phy_1t_init_table); @@ -2429,29 +3266,33 @@ static int rtl8xxxu_init_phy_bb(struct rtl8xxxu_priv *priv) rtl8xxxu_write32(priv, REG_TX_TO_TX, val32); } - if (priv->hi_pa) + if (priv->rtlchip == 0x8723b) + rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_8723bu_table); + else if (priv->hi_pa) rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_highpa_table); else rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_standard_table); - if (priv->rtlchip == 0x8723a && - priv->efuse_wifi.efuse8723.version >= 0x01) { + if (priv->has_xtalk) { val32 = rtl8xxxu_read32(priv, REG_MAC_PHY_CTRL); - val8 = priv->efuse_wifi.efuse8723.xtal_k & 0x3f; + val8 = priv->xtalk; val32 &= 0xff000fff; val32 |= ((val8 | (val8 << 6)) << 12); rtl8xxxu_write32(priv, REG_MAC_PHY_CTRL, val32); } - ldoa15 = LDOA15_ENABLE | LDOA15_OBUF; - ldov12d = LDOV12D_ENABLE | BIT(2) | (2 << LDOV12D_VADJ_SHIFT); - ldohci12 = 0x57; - lpldo = 1; - val32 = (lpldo << 24) | (ldohci12 << 16) | (ldov12d << 8) | ldoa15; + if (priv->rtlchip != 0x8723bu) { + ldoa15 = LDOA15_ENABLE | LDOA15_OBUF; + ldov12d = LDOV12D_ENABLE | BIT(2) | (2 << LDOV12D_VADJ_SHIFT); + ldohci12 = 0x57; + lpldo = 1; + val32 = (lpldo << 24) | (ldohci12 << 16) | + (ldov12d << 8) | ldoa15; - rtl8xxxu_write32(priv, REG_LDOA15_CTRL, val32); + rtl8xxxu_write32(priv, REG_LDOA15_CTRL, val32); + } return 0; } @@ -2492,8 +3333,6 @@ static int rtl8xxxu_init_rf_regs(struct rtl8xxxu_priv *priv, continue; } - reg &= 0x3f; - ret = rtl8xxxu_write_rfreg(priv, path, reg, val); if (ret) { dev_warn(&priv->udev->dev, @@ -2623,6 +3462,31 @@ exit: return ret; } +static int rtl8xxxu_auto_llt_table(struct rtl8xxxu_priv *priv, u8 last_tx_page) +{ + u32 val32; + int ret = 0; + int i; + + val32 = rtl8xxxu_read32(priv, REG_AUTO_LLT); + val32 |= AUTO_LLT_INIT_LLT; + rtl8xxxu_write32(priv, REG_AUTO_LLT, val32); + + for (i = 500; i; i--) { + val32 = rtl8xxxu_read32(priv, REG_AUTO_LLT); + if (!(val32 & AUTO_LLT_INIT_LLT)) + break; + usleep_range(2, 4); + } + + if (!i) { + ret = -EBUSY; + dev_warn(&priv->udev->dev, "LLT table init failed\n"); + } + + return ret; +} + static int rtl8xxxu_init_queue_priority(struct rtl8xxxu_priv *priv) { u16 val16, hi, lo; @@ -2954,6 +3818,91 @@ static bool rtl8xxxu_simularity_compare(struct rtl8xxxu_priv *priv, return false; } +static bool rtl8723bu_simularity_compare(struct rtl8xxxu_priv *priv, + int result[][8], int c1, int c2) +{ + u32 i, j, diff, simubitmap, bound = 0; + int candidate[2] = {-1, -1}; /* for path A and path B */ + int tmp1, tmp2; + bool retval = true; + + if (priv->tx_paths > 1) + bound = 8; + else + bound = 4; + + simubitmap = 0; + + for (i = 0; i < bound; i++) { + if (i & 1) { + if ((result[c1][i] & 0x00000200)) + tmp1 = result[c1][i] | 0xfffffc00; + else + tmp1 = result[c1][i]; + + if ((result[c2][i]& 0x00000200)) + tmp2 = result[c2][i] | 0xfffffc00; + else + tmp2 = result[c2][i]; + } else { + tmp1 = result[c1][i]; + tmp2 = result[c2][i]; + } + + diff = (tmp1 > tmp2) ? (tmp1 - tmp2) : (tmp2 - tmp1); + + if (diff > MAX_TOLERANCE) { + if ((i == 2 || i == 6) && !simubitmap) { + if (result[c1][i] + result[c1][i + 1] == 0) + candidate[(i / 4)] = c2; + else if (result[c2][i] + result[c2][i + 1] == 0) + candidate[(i / 4)] = c1; + else + simubitmap = simubitmap | (1 << i); + } else { + simubitmap = simubitmap | (1 << i); + } + } + } + + if (simubitmap == 0) { + for (i = 0; i < (bound / 4); i++) { + if (candidate[i] >= 0) { + for (j = i * 4; j < (i + 1) * 4 - 2; j++) + result[3][j] = result[candidate[i]][j]; + retval = false; + } + } + return retval; + } else { + if (!(simubitmap & 0x03)) { + /* path A TX OK */ + for (i = 0; i < 2; i++) + result[3][i] = result[c1][i]; + } + + if (!(simubitmap & 0x0c)) { + /* path A RX OK */ + for (i = 2; i < 4; i++) + result[3][i] = result[c1][i]; + } + + if (!(simubitmap & 0x30) && priv->tx_paths > 1) { + /* path B RX OK */ + for (i = 4; i < 6; i++) + result[3][i] = result[c1][i]; + } + + if (!(simubitmap & 0x30) && priv->tx_paths > 1) { + /* path B RX OK */ + for (i = 6; i < 8; i++) + result[3][i] = result[c1][i]; + } + } + + return false; +} + static void rtl8xxxu_save_mac_regs(struct rtl8xxxu_priv *priv, const u32 *reg, u32 *backup) { @@ -3001,11 +3950,13 @@ static void rtl8xxxu_path_adda_on(struct rtl8xxxu_priv *priv, const u32 *regs, u32 path_on; int i; - path_on = path_a_on ? 0x04db25a4 : 0x0b1b25a4; if (priv->tx_paths == 1) { - path_on = 0x0bdb25a0; - rtl8xxxu_write32(priv, regs[0], 0x0b1b25a0); + path_on = priv->fops->adda_1t_path_on; + rtl8xxxu_write32(priv, regs[0], priv->fops->adda_1t_init); } else { + path_on = path_a_on ? priv->fops->adda_2t_path_on_a : + priv->fops->adda_2t_path_on_b; + rtl8xxxu_write32(priv, regs[0], path_on); } @@ -3119,6 +4070,369 @@ out: return result; } +static int rtl8723bu_iqk_path_a(struct rtl8xxxu_priv *priv) +{ + u32 reg_eac, reg_e94, reg_e9c, path_sel, val32; + int result = 0; + + path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH); + + /* + * Leave IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* + * Enable path A PA in TX IQK mode + */ + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); + val32 |= 0x80000; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x20000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0003f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xc7f87); + + /* + * Tx IQK setting + */ + rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + /* path-A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x821403ea); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28110000); + rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911); + + /* + * Enter IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + val32 |= 0x80800000; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* + * The vendor driver indicates the USB module is always using + * S0S1 path 1 for the 8723bu. This may be different for 8192eu + */ + if (priv->rf_paths > 1) + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000); + else + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280); + + /* + * Bit 12 seems to be BT_GRANT, and is only found in the 8723bu. + * No trace of this in the 8192eu or 8188eu vendor drivers. + */ + rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(1); + + /* Restore Ant Path */ + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel); +#ifdef RTL8723BU_BT + /* GNT_BT = 1 */ + rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800); +#endif + + /* + * Leave IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A); + reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A); + + val32 = (reg_e9c >> 16) & 0x3ff; + if (val32 & 0x200) + val32 = 0x400 - val32; + + if (!(reg_eac & BIT(28)) && + ((reg_e94 & 0x03ff0000) != 0x01420000) && + ((reg_e9c & 0x03ff0000) != 0x00420000) && + ((reg_e94 & 0x03ff0000) < 0x01100000) && + ((reg_e94 & 0x03ff0000) > 0x00f00000) && + val32 < 0xf) + result |= 0x01; + else /* If TX not OK, ignore RX */ + goto out; + +out: + return result; +} + +static int rtl8723bu_rx_iqk_path_a(struct rtl8xxxu_priv *priv) +{ + u32 reg_ea4, reg_eac, reg_e94, reg_e9c, path_sel, val32; + int result = 0; + + path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH); + + /* + * Leave IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* + * Enable path A PA in TX IQK mode + */ + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); + val32 |= 0x80000; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7fb7); + + /* + * Tx IQK setting + */ + rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + /* path-A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160ff0); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28110000); + rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911); + + /* + * Enter IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + val32 |= 0x80800000; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* + * The vendor driver indicates the USB module is always using + * S0S1 path 1 for the 8723bu. This may be different for 8192eu + */ + if (priv->rf_paths > 1) + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000); + else + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280); + + /* + * Bit 12 seems to be BT_GRANT, and is only found in the 8723bu. + * No trace of this in the 8192eu or 8188eu vendor drivers. + */ + rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(1); + + /* Restore Ant Path */ + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel); +#ifdef RTL8723BU_BT + /* GNT_BT = 1 */ + rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800); +#endif + + /* + * Leave IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A); + reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A); + + val32 = (reg_e9c >> 16) & 0x3ff; + if (val32 & 0x200) + val32 = 0x400 - val32; + + if (!(reg_eac & BIT(28)) && + ((reg_e94 & 0x03ff0000) != 0x01420000) && + ((reg_e9c & 0x03ff0000) != 0x00420000) && + ((reg_e94 & 0x03ff0000) < 0x01100000) && + ((reg_e94 & 0x03ff0000) > 0x00f00000) && + val32 < 0xf) + result |= 0x01; + else /* If TX not OK, ignore RX */ + goto out; + + val32 = 0x80007c00 | (reg_e94 &0x3ff0000) | + ((reg_e9c & 0x3ff0000) >> 16); + rtl8xxxu_write32(priv, REG_TX_IQK, val32); + + /* + * Modify RX IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); + val32 |= 0x80000; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7d77); + + /* + * PA, PAD setting + */ + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0xf80); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_55, 0x4021f); + + /* + * RX IQK setting + */ + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + /* path-A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x18008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82110000); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x2816001f); + rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a8d1); + + /* + * Enter IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + val32 |= 0x80800000; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + if (priv->rf_paths > 1) + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000); + else + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280); + + /* + * Disable BT + */ + rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(1); + + /* Restore Ant Path */ + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel); +#ifdef RTL8723BU_BT + /* GNT_BT = 1 */ + rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800); +#endif + + /* + * Leave IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2); + + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x780); + + val32 = (reg_eac >> 16) & 0x3ff; + if (val32 & 0x200) + val32 = 0x400 - val32; + + if (!(reg_eac & BIT(27)) && + ((reg_ea4 & 0x03ff0000) != 0x01320000) && + ((reg_eac & 0x03ff0000) != 0x00360000) && + ((reg_ea4 & 0x03ff0000) < 0x01100000) && + ((reg_ea4 & 0x03ff0000) > 0x00f00000) && + val32 < 0xf) + result |= 0x02; + else /* If TX not OK, ignore RX */ + goto out; +out: + return result; +} + +#ifdef RTL8723BU_PATH_B +static int rtl8723bu_iqk_path_b(struct rtl8xxxu_priv *priv) +{ + u32 reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc, path_sel; + int result = 0; + + path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH); + + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* One shot, path B LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_CONT, 0x00000002); + rtl8xxxu_write32(priv, REG_IQK_AGC_CONT, 0x00000000); + + mdelay(1); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_eb4 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B); + reg_ebc = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B); + reg_ec4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2); + reg_ecc = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2); + + if (!(reg_eac & BIT(31)) && + ((reg_eb4 & 0x03ff0000) != 0x01420000) && + ((reg_ebc & 0x03ff0000) != 0x00420000)) + result |= 0x01; + else + goto out; + + if (!(reg_eac & BIT(30)) && + (((reg_ec4 & 0x03ff0000) >> 16) != 0x132) && + (((reg_ecc & 0x03ff0000) >> 16) != 0x36)) + result |= 0x02; + else + dev_warn(&priv->udev->dev, "%s: Path B RX IQK failed!\n", + __func__); +out: + return result; +} +#endif + static void rtl8xxxu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, int result[][8], int t) { @@ -3321,7 +4635,249 @@ static void rtl8xxxu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, } } -static void rtl8723a_phy_iq_calibrate(struct rtl8xxxu_priv *priv) +static void rtl8723bu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, + int result[][8], int t) +{ + struct device *dev = &priv->udev->dev; + u32 i, val32; + int path_a_ok /*, path_b_ok */; + int retry = 2; + const u32 adda_regs[RTL8XXXU_ADDA_REGS] = { + REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH, + REG_RX_WAIT_CCA, REG_TX_CCK_RFON, + REG_TX_CCK_BBON, REG_TX_OFDM_RFON, + REG_TX_OFDM_BBON, REG_TX_TO_RX, + REG_TX_TO_TX, REG_RX_CCK, + REG_RX_OFDM, REG_RX_WAIT_RIFS, + REG_RX_TO_RX, REG_STANDBY, + REG_SLEEP, REG_PMPD_ANAEN + }; + const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = { + REG_TXPAUSE, REG_BEACON_CTRL, + REG_BEACON_CTRL_1, REG_GPIO_MUXCFG + }; + const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = { + REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR, + REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B, + REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE, + REG_FPGA0_XB_RF_INT_OE, REG_FPGA0_RF_MODE + }; + u8 xa_agc = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1) & 0xff; + u8 xb_agc = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1) & 0xff; + + /* + * Note: IQ calibration must be performed after loading + * PHY_REG.txt , and radio_a, radio_b.txt + */ + + if (t == 0) { + /* Save ADDA parameters, turn Path A ADDA on */ + rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup, + RTL8XXXU_ADDA_REGS); + rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup); + rtl8xxxu_save_regs(priv, iqk_bb_regs, + priv->bb_backup, RTL8XXXU_BB_REGS); + } + + rtl8xxxu_path_adda_on(priv, adda_regs, true); + + /* MAC settings */ + rtl8xxxu_mac_calibration(priv, iqk_mac_regs, priv->mac_backup); + + val32 = rtl8xxxu_read32(priv, REG_CCK0_AFE_SETTING); + val32 |= 0x0f000000; + rtl8xxxu_write32(priv, REG_CCK0_AFE_SETTING, val32); + + rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600); + rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4); + rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x22204000); + +#ifdef RTL8723BU_PATH_B + /* Set RF mode to standby Path B */ + if (priv->tx_paths > 1) + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_AC, 0x10000); +#endif + +#if 0 + /* Page B init */ + rtl8xxxu_write32(priv, REG_CONFIG_ANT_A, 0x0f600000); + + if (priv->tx_paths > 1) + rtl8xxxu_write32(priv, REG_CONFIG_ANT_B, 0x0f600000); +#endif + + /* + * RX IQ calibration setting for 8723B D cut large current issue + * when leaving IPS + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); + val32 |= 0x80000; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); + + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7fb7); + + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED); + val32 |= 0x20; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED, val32); + + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_43, 0x60fbd); + + for (i = 0; i < retry; i++) { + path_a_ok = rtl8723bu_iqk_path_a(priv); + if (path_a_ok == 0x01) { + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + +#if 0 /* Only needed in restore case, we may need this when going to suspend */ + priv->RFCalibrateInfo.TxLOK[RF_A] = + rtl8xxxu_read_rfreg(priv, RF_A, + RF6052_REG_TXM_IDAC); +#endif + + val32 = rtl8xxxu_read32(priv, + REG_TX_POWER_BEFORE_IQK_A); + result[t][0] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, + REG_TX_POWER_AFTER_IQK_A); + result[t][1] = (val32 >> 16) & 0x3ff; + + break; + } + } + + if (!path_a_ok) + dev_dbg(dev, "%s: Path A TX IQK failed!\n", __func__); + + for (i = 0; i < retry; i++) { + path_a_ok = rtl8723bu_rx_iqk_path_a(priv); + if (path_a_ok == 0x03) { + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_BEFORE_IQK_A_2); + result[t][2] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_AFTER_IQK_A_2); + result[t][3] = (val32 >> 16) & 0x3ff; + + break; + } + } + + if (!path_a_ok) + dev_dbg(dev, "%s: Path A RX IQK failed!\n", __func__); + + if (priv->tx_paths > 1) { +#if 1 + dev_warn(dev, "%s: Path B not supported\n", __func__); +#else + + /* + * Path A into standby + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0x10000); + + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + val32 |= 0x80800000; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* Turn Path B ADDA on */ + rtl8xxxu_path_adda_on(priv, adda_regs, false); + + for (i = 0; i < retry; i++) { + path_b_ok = rtl8xxxu_iqk_path_b(priv); + if (path_b_ok == 0x03) { + val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B); + result[t][4] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B); + result[t][5] = (val32 >> 16) & 0x3ff; + break; + } + } + + if (!path_b_ok) + dev_dbg(dev, "%s: Path B IQK failed!\n", __func__); + + for (i = 0; i < retry; i++) { + path_b_ok = rtl8723bu_rx_iqk_path_b(priv); + if (path_a_ok == 0x03) { + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_BEFORE_IQK_B_2); + result[t][6] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_AFTER_IQK_B_2); + result[t][7] = (val32 >> 16) & 0x3ff; + break; + } + } + + if (!path_b_ok) + dev_dbg(dev, "%s: Path B RX IQK failed!\n", __func__); +#endif + } + + /* Back to BB mode, load original value */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + if (t) { + /* Reload ADDA power saving parameters */ + rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup, + RTL8XXXU_ADDA_REGS); + + /* Reload MAC parameters */ + rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup); + + /* Reload BB parameters */ + rtl8xxxu_restore_regs(priv, iqk_bb_regs, + priv->bb_backup, RTL8XXXU_BB_REGS); + + /* Restore RX initial gain */ + val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1); + val32 &= 0xffffff00; + rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | 0x50); + rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | xa_agc); + + if (priv->tx_paths > 1) { + val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1); + val32 &= 0xffffff00; + rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1, + val32 | 0x50); + rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1, + val32 | xb_agc); + } + + /* Load 0xe30 IQC default value */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00); + } +} + +static void rtl8xxxu_prepare_calibrate(struct rtl8xxxu_priv *priv, u8 start) +{ + struct h2c_cmd h2c; + + if (priv->fops->mbox_ext_width < 4) + return; + + memset(&h2c, 0, sizeof(struct h2c_cmd)); + h2c.bt_wlan_calibration.cmd = H2C_8723B_BT_WLAN_CALIBRATION; + h2c.bt_wlan_calibration.data = start; + + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_wlan_calibration)); +} + +static void rtl8723au_phy_iq_calibrate(struct rtl8xxxu_priv *priv) { struct device *dev = &priv->udev->dev; int result[4][8]; /* last is final result */ @@ -3332,6 +4888,8 @@ static void rtl8723a_phy_iq_calibrate(struct rtl8xxxu_priv *priv) s32 reg_tmp = 0; bool simu; + rtl8xxxu_prepare_calibrate(priv, 1); + memset(result, 0, sizeof(result)); candidate = -1; @@ -3419,6 +4977,135 @@ static void rtl8723a_phy_iq_calibrate(struct rtl8xxxu_priv *priv) rtl8xxxu_save_regs(priv, rtl8723au_iqk_phy_iq_bb_reg, priv->bb_recovery_backup, RTL8XXXU_BB_REGS); + + rtl8xxxu_prepare_calibrate(priv, 0); +} + +static void rtl8723bu_phy_iq_calibrate(struct rtl8xxxu_priv *priv) +{ + struct device *dev = &priv->udev->dev; + int result[4][8]; /* last is final result */ + int i, candidate; + bool path_a_ok, path_b_ok; + u32 reg_e94, reg_e9c, reg_ea4, reg_eac; + u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc; + u32 val32, bt_control; + s32 reg_tmp = 0; + bool simu; + + rtl8xxxu_prepare_calibrate(priv, 1); + + memset(result, 0, sizeof(result)); + candidate = -1; + + path_a_ok = false; + path_b_ok = false; + + bt_control = rtl8xxxu_read32(priv, REG_BT_CONTROL_8723BU); + + for (i = 0; i < 3; i++) { + rtl8723bu_phy_iqcalibrate(priv, result, i); + + if (i == 1) { + simu = rtl8723bu_simularity_compare(priv, result, 0, 1); + if (simu) { + candidate = 0; + break; + } + } + + if (i == 2) { + simu = rtl8723bu_simularity_compare(priv, result, 0, 2); + if (simu) { + candidate = 0; + break; + } + + simu = rtl8723bu_simularity_compare(priv, result, 1, 2); + if (simu) { + candidate = 1; + } else { + for (i = 0; i < 8; i++) + reg_tmp += result[3][i]; + + if (reg_tmp) + candidate = 3; + else + candidate = -1; + } + } + } + + for (i = 0; i < 4; i++) { + reg_e94 = result[i][0]; + reg_e9c = result[i][1]; + reg_ea4 = result[i][2]; + reg_eac = result[i][3]; + reg_eb4 = result[i][4]; + reg_ebc = result[i][5]; + reg_ec4 = result[i][6]; + reg_ecc = result[i][7]; + } + + if (candidate >= 0) { + reg_e94 = result[candidate][0]; + priv->rege94 = reg_e94; + reg_e9c = result[candidate][1]; + priv->rege9c = reg_e9c; + reg_ea4 = result[candidate][2]; + reg_eac = result[candidate][3]; + reg_eb4 = result[candidate][4]; + priv->regeb4 = reg_eb4; + reg_ebc = result[candidate][5]; + priv->regebc = reg_ebc; + reg_ec4 = result[candidate][6]; + reg_ecc = result[candidate][7]; + dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate); + dev_dbg(dev, + "%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x " + "ecc=%x\n ", __func__, reg_e94, reg_e9c, + reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc); + path_a_ok = true; + path_b_ok = true; + } else { + reg_e94 = reg_eb4 = priv->rege94 = priv->regeb4 = 0x100; + reg_e9c = reg_ebc = priv->rege9c = priv->regebc = 0x0; + } + + if (reg_e94 && candidate >= 0) + rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result, + candidate, (reg_ea4 == 0)); + + if (priv->tx_paths > 1 && reg_eb4) + rtl8xxxu_fill_iqk_matrix_b(priv, path_b_ok, result, + candidate, (reg_ec4 == 0)); + + rtl8xxxu_save_regs(priv, rtl8723au_iqk_phy_iq_bb_reg, + priv->bb_recovery_backup, RTL8XXXU_BB_REGS); + + rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, bt_control); + + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); + val32 |= 0x80000; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x18000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xe6177); + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED); + val32 |= 0x20; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED, val32); + rtl8xxxu_write_rfreg(priv, RF_A, 0x43, 0x300bd); + + if (priv->rf_paths > 1) { + dev_dbg(dev, "%s: beware 2T not yet supported\n", __func__); +#ifdef RTL8723BU_PATH_B + if (RF_Path == 0x0) //S1 + ODM_SetIQCbyRFpath(pDM_Odm, 0); + else //S0 + ODM_SetIQCbyRFpath(pDM_Odm, 1); +#endif + } + rtl8xxxu_prepare_calibrate(priv, 0); } static void rtl8723a_phy_lc_calibrate(struct rtl8xxxu_priv *priv) @@ -3456,12 +5143,17 @@ static void rtl8723a_phy_lc_calibrate(struct rtl8xxxu_priv *priv) } /* Start LC calibration */ + if (priv->fops->has_s0s1) + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_S0S1, 0xdfbe0); val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_MODE_AG); val32 |= 0x08000; rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, val32); msleep(100); + if (priv->fops->has_s0s1) + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_S0S1, 0xdffe0); + /* Restore original parameters */ if (lstf & OFDM_LSTF_MASK) { /* Path-A */ @@ -3584,6 +5276,64 @@ exit: return ret; } +static int rtl8723bu_active_to_emu(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u16 val16; + u32 val32; + int count, ret; + + /* Turn off RF */ + rtl8xxxu_write8(priv, REG_RF_CTRL, 0); + + /* Enable rising edge triggering interrupt */ + val16 = rtl8xxxu_read16(priv, REG_GPIO_INTM); + val16 &= ~GPIO_INTM_EDGE_TRIG_IRQ; + rtl8xxxu_write16(priv, REG_GPIO_INTM, val16); + + /* Release WLON reset 0x04[16]= 1*/ + val32 = rtl8xxxu_read32(priv, REG_GPIO_INTM); + val32 |= APS_FSMCO_WLON_RESET; + rtl8xxxu_write32(priv, REG_GPIO_INTM, val32); + + /* 0x0005[1] = 1 turn off MAC by HW state machine*/ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 |= BIT(1); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + if ((val8 & BIT(1)) == 0) + break; + udelay(10); + } + + if (!count) { + dev_warn(&priv->udev->dev, "%s: Disabling MAC timed out\n", + __func__); + ret = -EBUSY; + goto exit; + } + + /* Enable BT control XTAL setting */ + val8 = rtl8xxxu_read8(priv, REG_AFE_MISC); + val8 &= ~AFE_MISC_WL_XTAL_CTRL; + rtl8xxxu_write8(priv, REG_AFE_MISC, val8); + + /* 0x0000[5] = 1 analog Ips to digital, 1:isolation */ + val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL); + val8 |= SYS_ISO_ANALOG_IPS; + rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8); + + /* 0x0020[0] = 0 disable LDOA12 MACRO block*/ + val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL); + val8 &= ~LDOA15_ENABLE; + rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8); + +exit: + return ret; +} + static int rtl8xxxu_active_to_lps(struct rtl8xxxu_priv *priv) { u8 val8; @@ -3640,7 +5390,7 @@ exit: return ret; } -static void rtl8xxxu_disabled_to_emu(struct rtl8xxxu_priv *priv) +static void rtl8723a_disabled_to_emu(struct rtl8xxxu_priv *priv) { u8 val8; @@ -3660,7 +5410,82 @@ static void rtl8xxxu_disabled_to_emu(struct rtl8xxxu_priv *priv) rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); } -static int rtl8xxxu_emu_to_active(struct rtl8xxxu_priv *priv) +static void rtl8192e_disabled_to_emu(struct rtl8xxxu_priv *priv) +{ + u8 val8; + + /* Clear suspend enable and power down enable*/ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 &= ~(BIT(3) | BIT(4)); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); +} + +static int rtl8192e_emu_to_active(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u32 val32; + int count, ret = 0; + + /* disable HWPDN 0x04[15]=0*/ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 &= ~BIT(7); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + /* disable SW LPS 0x04[10]= 0 */ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 &= ~BIT(2); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + /* disable WL suspend*/ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 &= ~(BIT(3) | BIT(4)); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + /* wait till 0x04[17] = 1 power ready*/ + for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + if (val32 & BIT(17)) + break; + + udelay(10); + } + + if (!count) { + ret = -EBUSY; + goto exit; + } + + /* We should be able to optimize the following three entries into one */ + + /* release WLON reset 0x04[16]= 1*/ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 2); + val8 |= BIT(0); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 2, val8); + + /* set, then poll until 0 */ + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + val32 |= APS_FSMCO_MAC_ENABLE; + rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); + + for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + if ((val32 & APS_FSMCO_MAC_ENABLE) == 0) { + ret = 0; + break; + } + udelay(10); + } + + if (!count) { + ret = -EBUSY; + goto exit; + } + +exit: + return ret; +} + +static int rtl8723a_emu_to_active(struct rtl8xxxu_priv *priv) { u8 val8; u32 val32; @@ -3752,6 +5577,127 @@ exit: return ret; } +static int rtl8723b_emu_to_active(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u32 val32; + int count, ret = 0; + + /* 0x20[0] = 1 enable LDOA12 MACRO block for all interface */ + val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL); + val8 |= LDOA15_ENABLE; + rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8); + + /* 0x67[0] = 0 to disable BT_GPS_SEL pins*/ + val8 = rtl8xxxu_read8(priv, 0x0067); + val8 &= ~BIT(4); + rtl8xxxu_write8(priv, 0x0067, val8); + + mdelay(1); + + /* 0x00[5] = 0 release analog Ips to digital, 1:isolation */ + val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL); + val8 &= ~SYS_ISO_ANALOG_IPS; + rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8); + + /* Disable SW LPS 0x04[10]= 0 */ + val32 = rtl8xxxu_read8(priv, REG_APS_FSMCO); + val32 &= ~APS_FSMCO_SW_LPS; + rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); + + /* Wait until 0x04[17] = 1 power ready */ + for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + if (val32 & BIT(17)) + break; + + udelay(10); + } + + if (!count) { + ret = -EBUSY; + goto exit; + } + + /* We should be able to optimize the following three entries into one */ + + /* Release WLON reset 0x04[16]= 1*/ + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + val32 |= APS_FSMCO_WLON_RESET; + rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); + + /* Disable HWPDN 0x04[15]= 0*/ + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + val32 &= ~APS_FSMCO_HW_POWERDOWN; + rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); + + /* Disable WL suspend*/ + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + val32 &= ~(APS_FSMCO_HW_SUSPEND | APS_FSMCO_PCIE); + rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); + + /* Set, then poll until 0 */ + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + val32 |= APS_FSMCO_MAC_ENABLE; + rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); + + for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + if ((val32 & APS_FSMCO_MAC_ENABLE) == 0) { + ret = 0; + break; + } + udelay(10); + } + + if (!count) { + ret = -EBUSY; + goto exit; + } + + /* Enable WL control XTAL setting */ + val8 = rtl8xxxu_read8(priv, REG_AFE_MISC); + val8 |= AFE_MISC_WL_XTAL_CTRL; + rtl8xxxu_write8(priv, REG_AFE_MISC, val8); + + /* Enable falling edge triggering interrupt */ + val8 = rtl8xxxu_read8(priv, REG_GPIO_INTM + 1); + val8 |= BIT(1); + rtl8xxxu_write8(priv, REG_GPIO_INTM + 1, val8); + + /* Enable GPIO9 interrupt mode */ + val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL_2 + 1); + val8 |= BIT(1); + rtl8xxxu_write8(priv, REG_GPIO_IO_SEL_2 + 1, val8); + + /* Enable GPIO9 input mode */ + val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL_2); + val8 &= ~BIT(1); + rtl8xxxu_write8(priv, REG_GPIO_IO_SEL_2, val8); + + /* Enable HSISR GPIO[C:0] interrupt */ + val8 = rtl8xxxu_read8(priv, REG_HSIMR); + val8 |= BIT(0); + rtl8xxxu_write8(priv, REG_HSIMR, val8); + + /* Enable HSISR GPIO9 interrupt */ + val8 = rtl8xxxu_read8(priv, REG_HSIMR + 2); + val8 |= BIT(1); + rtl8xxxu_write8(priv, REG_HSIMR + 2, val8); + + val8 = rtl8xxxu_read8(priv, REG_MULTI_FUNC_CTRL); + val8 |= MULTI_WIFI_HW_ROF_EN; + rtl8xxxu_write8(priv, REG_MULTI_FUNC_CTRL, val8); + + /* For GPIO9 internal pull high setting BIT(14) */ + val8 = rtl8xxxu_read8(priv, REG_MULTI_FUNC_CTRL + 1); + val8 |= BIT(6); + rtl8xxxu_write8(priv, REG_MULTI_FUNC_CTRL + 1, val8); + +exit: + return ret; +} + static int rtl8xxxu_emu_to_disabled(struct rtl8xxxu_priv *priv) { u8 val8; @@ -3777,6 +5723,39 @@ static int rtl8xxxu_emu_to_disabled(struct rtl8xxxu_priv *priv) return 0; } +static int rtl8xxxu_flush_fifo(struct rtl8xxxu_priv *priv) +{ + struct device *dev = &priv->udev->dev; + u32 val32; + int retry, retval; + + rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff); + + val32 = rtl8xxxu_read32(priv, REG_RXPKT_NUM); + val32 |= RXPKT_NUM_RW_RELEASE_EN; + rtl8xxxu_write32(priv, REG_RXPKT_NUM, val32); + + retry = 100; + retval = -EBUSY; + + do { + val32 = rtl8xxxu_read32(priv, REG_RXPKT_NUM); + if (val32 & RXPKT_NUM_RXDMA_IDLE) { + retval = 0; + break; + } + } while (retry--); + + rtl8xxxu_write16(priv, REG_RQPN_NPQ, 0); + rtl8xxxu_write32(priv, REG_RQPN, 0x80000000); + mdelay(2); + + if (!retry) + dev_warn(dev, "Failed to flush FIFO\n"); + + return retval; +} + static int rtl8723au_power_on(struct rtl8xxxu_priv *priv) { u8 val8; @@ -3789,9 +5768,9 @@ static int rtl8723au_power_on(struct rtl8xxxu_priv *priv) */ rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x0); - rtl8xxxu_disabled_to_emu(priv); + rtl8723a_disabled_to_emu(priv); - ret = rtl8xxxu_emu_to_active(priv); + ret = rtl8723a_emu_to_active(priv); if (ret) goto exit; @@ -3823,6 +5802,62 @@ exit: return ret; } +static int rtl8723bu_power_on(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u16 val16; + u32 val32; + int ret; + + rtl8723a_disabled_to_emu(priv); + + ret = rtl8723b_emu_to_active(priv); + if (ret) + goto exit; + + /* + * Enable MAC DMA/WMAC/SCHEDULE/SEC block + * Set CR bit10 to enable 32k calibration. + */ + val16 = rtl8xxxu_read16(priv, REG_CR); + val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE | + CR_TXDMA_ENABLE | CR_RXDMA_ENABLE | + CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE | + CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE | + CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE); + rtl8xxxu_write16(priv, REG_CR, val16); + + /* + * BT coexist power on settings. This is identical for 1 and 2 + * antenna parts. + */ + rtl8xxxu_write8(priv, REG_PAD_CTRL1 + 3, 0x20); + + val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); + val16 |= SYS_FUNC_BBRSTB | SYS_FUNC_BB_GLB_RSTN; + rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); + + rtl8xxxu_write8(priv, REG_BT_CONTROL_8723BU + 1, 0x18); + rtl8xxxu_write8(priv, REG_WLAN_ACT_CONTROL_8723B, 0x04); + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00); + /* Antenna inverse */ + rtl8xxxu_write8(priv, 0xfe08, 0x01); + + val16 = rtl8xxxu_read16(priv, REG_PWR_DATA); + val16 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN; + rtl8xxxu_write16(priv, REG_PWR_DATA, val16); + + val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); + val32 |= LEDCFG0_DPDT_SELECT; + rtl8xxxu_write32(priv, REG_LEDCFG0, val32); + + val8 = rtl8xxxu_read8(priv, REG_PAD_CTRL1); + val8 &= ~PAD_CTRL1_SW_DPDT_SEL_DATA; + rtl8xxxu_write8(priv, REG_PAD_CTRL1, val8); +exit: + return ret; +} + #ifdef CONFIG_RTL8XXXU_UNTESTED static int rtl8192cu_power_on(struct rtl8xxxu_priv *priv) @@ -3930,6 +5965,52 @@ static int rtl8192cu_power_on(struct rtl8xxxu_priv *priv) #endif +static int rtl8192eu_power_on(struct rtl8xxxu_priv *priv) +{ + u16 val16; + u32 val32; + int ret; + + ret = 0; + + val32 = rtl8xxxu_read32(priv, REG_SYS_CFG); + if (val32 & SYS_CFG_SPS_LDO_SEL) { + rtl8xxxu_write8(priv, REG_LDO_SW_CTRL, 0xc3); + } else { + /* + * Raise 1.2V voltage + */ + val32 = rtl8xxxu_read32(priv, REG_8192E_LDOV12_CTRL); + val32 &= 0xff0fffff; + val32 |= 0x00500000; + rtl8xxxu_write32(priv, REG_8192E_LDOV12_CTRL, val32); + rtl8xxxu_write8(priv, REG_LDO_SW_CTRL, 0x83); + } + + rtl8192e_disabled_to_emu(priv); + + ret = rtl8192e_emu_to_active(priv); + if (ret) + goto exit; + + rtl8xxxu_write16(priv, REG_CR, 0x0000); + + /* + * Enable MAC DMA/WMAC/SCHEDULE/SEC block + * Set CR bit10 to enable 32k calibration. + */ + val16 = rtl8xxxu_read16(priv, REG_CR); + val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE | + CR_TXDMA_ENABLE | CR_RXDMA_ENABLE | + CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE | + CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE | + CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE); + rtl8xxxu_write16(priv, REG_CR, val16); + +exit: + return ret; +} + static void rtl8xxxu_power_off(struct rtl8xxxu_priv *priv) { u8 val8; @@ -3945,6 +6026,8 @@ static void rtl8xxxu_power_off(struct rtl8xxxu_priv *priv) rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_PARM, val32); } + rtl8xxxu_flush_fifo(priv); + rtl8xxxu_active_to_lps(priv); /* Turn off RF */ @@ -3978,10 +6061,215 @@ static void rtl8xxxu_power_off(struct rtl8xxxu_priv *priv) rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x0e); } -static void rtl8xxxu_init_bt(struct rtl8xxxu_priv *priv) +static void rtl8723bu_power_off(struct rtl8xxxu_priv *priv) { - if (!priv->has_bluetooth) - return; + u8 val8; + u16 val16; + + rtl8xxxu_flush_fifo(priv); + + /* + * Disable TX report timer + */ + val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL); + val8 &= ~TX_REPORT_CTRL_TIMER_ENABLE; + rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8); + + rtl8xxxu_write16(priv, REG_CR, 0x0000); + + rtl8xxxu_active_to_lps(priv); + + /* Reset Firmware if running in RAM */ + if (rtl8xxxu_read8(priv, REG_MCU_FW_DL) & MCU_FW_RAM_SEL) + rtl8xxxu_firmware_self_reset(priv); + + /* Reset MCU */ + val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); + val16 &= ~SYS_FUNC_CPU_ENABLE; + rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); + + /* Reset MCU ready status */ + rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00); + + rtl8723bu_active_to_emu(priv); + rtl8xxxu_emu_to_disabled(priv); +} + +#ifdef NEED_PS_TDMA +static void rtl8723bu_set_ps_tdma(struct rtl8xxxu_priv *priv, + u8 arg1, u8 arg2, u8 arg3, u8 arg4, u8 arg5) +{ + struct h2c_cmd h2c; + + memset(&h2c, 0, sizeof(struct h2c_cmd)); + h2c.b_type_dma.cmd = H2C_8723B_B_TYPE_TDMA; + h2c.b_type_dma.data1 = arg1; + h2c.b_type_dma.data2 = arg2; + h2c.b_type_dma.data3 = arg3; + h2c.b_type_dma.data4 = arg4; + h2c.b_type_dma.data5 = arg5; + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.b_type_dma)); +} +#endif + +static void rtl8723b_enable_rf(struct rtl8xxxu_priv *priv) +{ + struct h2c_cmd h2c; + u32 val32; + u8 val8; + + /* + * No indication anywhere as to what 0x0790 does. The 2 antenna + * vendor code preserves bits 6-7 here. + */ + rtl8xxxu_write8(priv, 0x0790, 0x05); + /* + * 0x0778 seems to be related to enabling the number of antennas + * In the vendor driver halbtc8723b2ant_InitHwConfig() sets it + * to 0x03, while halbtc8723b1ant_InitHwConfig() sets it to 0x01 + */ + rtl8xxxu_write8(priv, 0x0778, 0x01); + + val8 = rtl8xxxu_read8(priv, REG_GPIO_MUXCFG); + val8 |= BIT(5); + rtl8xxxu_write8(priv, REG_GPIO_MUXCFG, val8); + + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_IQADJ_G1, 0x780); + + rtl8723bu_write_btreg(priv, 0x3c, 0x15); /* BT TRx Mask on */ + + /* + * Set BT grant to low + */ + memset(&h2c, 0, sizeof(struct h2c_cmd)); + h2c.bt_grant.cmd = H2C_8723B_BT_GRANT; + h2c.bt_grant.data = 0; + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_grant)); + + /* + * WLAN action by PTA + */ + rtl8xxxu_write8(priv, REG_WLAN_ACT_CONTROL_8723B, 0x04); + + /* + * BT select S0/S1 controlled by WiFi + */ + val8 = rtl8xxxu_read8(priv, 0x0067); + val8 |= BIT(5); + rtl8xxxu_write8(priv, 0x0067, val8); + + val32 = rtl8xxxu_read32(priv, REG_PWR_DATA); + val32 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN; + rtl8xxxu_write32(priv, REG_PWR_DATA, val32); + + /* + * Bits 6/7 are marked in/out ... but for what? + */ + rtl8xxxu_write8(priv, 0x0974, 0xff); + + val32 = rtl8xxxu_read32(priv, REG_RFE_BUFFER); + val32 |= (BIT(0) | BIT(1)); + rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32); + + rtl8xxxu_write8(priv, REG_RFE_CTRL_ANTA_SRC, 0x77); + + val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); + val32 &= ~BIT(24); + val32 |= BIT(23); + rtl8xxxu_write32(priv, REG_LEDCFG0, val32); + + /* + * Fix external switch Main->S1, Aux->S0 + */ + val8 = rtl8xxxu_read8(priv, REG_PAD_CTRL1); + val8 &= ~BIT(0); + rtl8xxxu_write8(priv, REG_PAD_CTRL1, val8); + + memset(&h2c, 0, sizeof(struct h2c_cmd)); + h2c.ant_sel_rsv.cmd = H2C_8723B_ANT_SEL_RSV; + h2c.ant_sel_rsv.ant_inverse = 1; + h2c.ant_sel_rsv.int_switch_type = 0; + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.ant_sel_rsv)); + + /* + * 0x280, 0x00, 0x200, 0x80 - not clear + */ + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00); + + /* + * Software control, antenna at WiFi side + */ +#ifdef NEED_PS_TDMA + rtl8723bu_set_ps_tdma(priv, 0x08, 0x00, 0x00, 0x00, 0x00); +#endif + + rtl8xxxu_write32(priv, REG_BT_COEX_TABLE1, 0x55555555); + rtl8xxxu_write32(priv, REG_BT_COEX_TABLE2, 0x55555555); + rtl8xxxu_write32(priv, REG_BT_COEX_TABLE3, 0x00ffffff); + rtl8xxxu_write8(priv, REG_BT_COEX_TABLE4, 0x03); + + memset(&h2c, 0, sizeof(struct h2c_cmd)); + h2c.bt_info.cmd = H2C_8723B_BT_INFO; + h2c.bt_info.data = BIT(0); + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_info)); + + memset(&h2c, 0, sizeof(struct h2c_cmd)); + h2c.ignore_wlan.cmd = H2C_8723B_BT_IGNORE_WLANACT; + h2c.ignore_wlan.data = 0; + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.ignore_wlan)); +} + +static void rtl8723b_disable_rf(struct rtl8xxxu_priv *priv) +{ + u32 val32; + + rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff); + + val32 = rtl8xxxu_read32(priv, REG_RX_WAIT_CCA); + val32 &= ~(BIT(22) | BIT(23)); + rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, val32); +} + +static void rtl8723bu_init_aggregation(struct rtl8xxxu_priv *priv) +{ + u32 agg_rx; + u8 agg_ctrl; + + /* + * For now simply disable RX aggregation + */ + agg_ctrl = rtl8xxxu_read8(priv, REG_TRXDMA_CTRL); + agg_ctrl &= ~TRXDMA_CTRL_RXDMA_AGG_EN; + + agg_rx = rtl8xxxu_read32(priv, REG_RXDMA_AGG_PG_TH); + agg_rx &= ~RXDMA_USB_AGG_ENABLE; + agg_rx &= ~0xff0f; + + rtl8xxxu_write8(priv, REG_TRXDMA_CTRL, agg_ctrl); + rtl8xxxu_write32(priv, REG_RXDMA_AGG_PG_TH, agg_rx); +} + +static void rtl8723bu_init_statistics(struct rtl8xxxu_priv *priv) +{ + u32 val32; + + /* Time duration for NHM unit: 4us, 0x2710=40ms */ + rtl8xxxu_write16(priv, REG_NHM_TIMER_8723B + 2, 0x2710); + rtl8xxxu_write16(priv, REG_NHM_TH9_TH10_8723B + 2, 0xffff); + rtl8xxxu_write32(priv, REG_NHM_TH3_TO_TH0_8723B, 0xffffff52); + rtl8xxxu_write32(priv, REG_NHM_TH7_TO_TH4_8723B, 0xffffffff); + /* TH8 */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 |= 0xff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + /* Enable CCK */ + val32 = rtl8xxxu_read32(priv, REG_NHM_TH9_TH10_8723B); + val32 |= BIT(8) | BIT(9) | BIT(10); + rtl8xxxu_write32(priv, REG_NHM_TH9_TH10_8723B, val32); + /* Max power amongst all RX antennas */ + val32 = rtl8xxxu_read32(priv, REG_OFDM0_FA_RSTC); + val32 |= BIT(7); + rtl8xxxu_write32(priv, REG_OFDM0_FA_RSTC, val32); } static int rtl8xxxu_init_device(struct ieee80211_hw *hw) @@ -4015,11 +6303,30 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) dev_dbg(dev, "%s: macpower %i\n", __func__, macpower); if (!macpower) { - ret = rtl8xxxu_init_llt_table(priv, TX_TOTAL_PAGE_NUM); + ret = priv->fops->llt_init(priv, TX_TOTAL_PAGE_NUM); if (ret) { dev_warn(dev, "%s: LLT table init failed\n", __func__); goto exit; } + + /* + * Presumably this is for 8188EU as well + * Enable TX report and TX report timer + */ + if (priv->rtlchip == 0x8723bu) { + val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL); + val8 |= TX_REPORT_CTRL_TIMER_ENABLE; + rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8); + /* Set MAX RPT MACID */ + rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL + 1, 0x02); + /* TX report Timer. Unit: 32us */ + rtl8xxxu_write16(priv, REG_TX_REPORT_TIME, 0xcdf0); + + /* tmp ps ? */ + val8 = rtl8xxxu_read8(priv, 0xa3); + val8 &= 0xf8; + rtl8xxxu_write8(priv, 0xa3, val8); + } } ret = rtl8xxxu_download_firmware(priv); @@ -4031,7 +6338,42 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) if (ret) goto exit; - ret = rtl8xxxu_init_mac(priv, rtl8723a_mac_init_table); + /* Solve too many protocol error on USB bus */ + /* Can't do this for 8188/8192 UMC A cut parts */ + if (priv->rtlchip == 0x8723a || + ((priv->rtlchip == 0x8192c || priv->rtlchip == 0x8191c || + priv->rtlchip == 0x8188c) && + (priv->chip_cut || !priv->vendor_umc))) { + rtl8xxxu_write8(priv, 0xfe40, 0xe6); + rtl8xxxu_write8(priv, 0xfe41, 0x94); + rtl8xxxu_write8(priv, 0xfe42, 0x80); + + rtl8xxxu_write8(priv, 0xfe40, 0xe0); + rtl8xxxu_write8(priv, 0xfe41, 0x19); + rtl8xxxu_write8(priv, 0xfe42, 0x80); + + rtl8xxxu_write8(priv, 0xfe40, 0xe5); + rtl8xxxu_write8(priv, 0xfe41, 0x91); + rtl8xxxu_write8(priv, 0xfe42, 0x80); + + rtl8xxxu_write8(priv, 0xfe40, 0xe2); + rtl8xxxu_write8(priv, 0xfe41, 0x81); + rtl8xxxu_write8(priv, 0xfe42, 0x80); + } + + if (priv->rtlchip == 0x8192e) { + rtl8xxxu_write32(priv, REG_HIMR0, 0x00); + rtl8xxxu_write32(priv, REG_HIMR1, 0x00); + } + + if (priv->fops->phy_init_antenna_selection) + priv->fops->phy_init_antenna_selection(priv); + + if (priv->rtlchip == 0x8723b) + ret = rtl8xxxu_init_mac(priv, rtl8723b_mac_init_table); + else + ret = rtl8xxxu_init_mac(priv, rtl8723a_mac_init_table); + dev_dbg(dev, "%s: init_mac %i\n", __func__, ret); if (ret) goto exit; @@ -4046,6 +6388,17 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) rftable = rtl8723au_radioa_1t_init_table; ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A); break; + case 0x8723b: + rftable = rtl8723bu_radioa_1t_init_table; + ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A); + /* + * PHY LCK + */ + rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdfbe0); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, 0x8c01); + msleep(200); + rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdffe0); + break; case 0x8188c: if (priv->hi_pa) rftable = rtl8188ru_radioa_1t_highpa_table; @@ -4072,27 +6425,27 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) if (ret) goto exit; - /* Reduce 80M spur */ - rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, 0x0381808d); - rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83); - rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff82); - rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83); - - /* RFSW Control - clear bit 14 ?? */ - rtl8xxxu_write32(priv, REG_FPGA0_TX_INFO, 0x00000003); - /* 0x07000760 */ - val32 = FPGA0_RF_TRSW | FPGA0_RF_TRSWB | FPGA0_RF_ANTSW | - FPGA0_RF_ANTSWB | FPGA0_RF_PAPE | - ((FPGA0_RF_ANTSW | FPGA0_RF_ANTSWB | FPGA0_RF_PAPE) << - FPGA0_RF_BD_CTRL_SHIFT); - rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_SW_CTRL, val32); - /* 0x860[6:5]= 00 - why? - this sets antenna B */ - rtl8xxxu_write32(priv, REG_FPGA0_XA_RF_INT_OE, 0x66F60210); - - priv->rf_mode_ag[0] = rtl8xxxu_read_rfreg(priv, RF_A, - RF6052_REG_MODE_AG); + /* + * Chip specific quirks + */ + if (priv->rtlchip == 0x8723a) { + /* Fix USB interface interference issue */ + rtl8xxxu_write8(priv, 0xfe40, 0xe0); + rtl8xxxu_write8(priv, 0xfe41, 0x8d); + rtl8xxxu_write8(priv, 0xfe42, 0x80); + rtl8xxxu_write32(priv, REG_TXDMA_OFFSET_CHK, 0xfd0320); + + /* Reduce 80M spur */ + rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, 0x0381808d); + rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83); + rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff82); + rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83); + } else { + val32 = rtl8xxxu_read32(priv, REG_TXDMA_OFFSET_CHK); + val32 |= TXDMA_OFFSET_DROP_DATA_EN; + rtl8xxxu_write32(priv, REG_TXDMA_OFFSET_CHK, val32); + } - dev_dbg(dev, "%s: macpower %i\n", __func__, macpower); if (!macpower) { if (priv->ep_tx_normal_queue) val8 = TX_PAGE_NUM_NORM_PQ; @@ -4114,6 +6467,10 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) * Set TX buffer boundary */ val8 = TX_TOTAL_PAGE_NUM + 1; + + if (priv->rtlchip == 0x8723b) + val8 -= 1; + rtl8xxxu_write8(priv, REG_TXPKTBUF_BCNQ_BDNY, val8); rtl8xxxu_write8(priv, REG_TXPKTBUF_MGQ_BDNY, val8); rtl8xxxu_write8(priv, REG_TXPKTBUF_WMAC_LBK_BF_HD, val8); @@ -4126,15 +6483,37 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) if (ret) goto exit; + /* RFSW Control - clear bit 14 ?? */ + if (priv->rtlchip != 0x8723b) + rtl8xxxu_write32(priv, REG_FPGA0_TX_INFO, 0x00000003); + /* 0x07000760 */ + val32 = FPGA0_RF_TRSW | FPGA0_RF_TRSWB | FPGA0_RF_ANTSW | + FPGA0_RF_ANTSWB | FPGA0_RF_PAPE | + ((FPGA0_RF_ANTSW | FPGA0_RF_ANTSWB | FPGA0_RF_PAPE) << + FPGA0_RF_BD_CTRL_SHIFT); + rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_SW_CTRL, val32); + /* 0x860[6:5]= 00 - why? - this sets antenna B */ + rtl8xxxu_write32(priv, REG_FPGA0_XA_RF_INT_OE, 0x66F60210); + + priv->rf_mode_ag[0] = rtl8xxxu_read_rfreg(priv, RF_A, + RF6052_REG_MODE_AG); + /* * Set RX page boundary */ - rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, 0x27ff); + if (priv->rtlchip == 0x8723b) + rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, 0x3f7f); + else + rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, 0x27ff); /* * Transfer page size is always 128 */ - val8 = (PBP_PAGE_SIZE_128 << PBP_PAGE_SIZE_RX_SHIFT) | - (PBP_PAGE_SIZE_128 << PBP_PAGE_SIZE_TX_SHIFT); + if (priv->rtlchip == 0x8723b) + val8 = (PBP_PAGE_SIZE_256 << PBP_PAGE_SIZE_RX_SHIFT) | + (PBP_PAGE_SIZE_256 << PBP_PAGE_SIZE_TX_SHIFT); + else + val8 = (PBP_PAGE_SIZE_128 << PBP_PAGE_SIZE_RX_SHIFT) | + (PBP_PAGE_SIZE_128 << PBP_PAGE_SIZE_TX_SHIFT); rtl8xxxu_write8(priv, REG_PBP, val8); /* @@ -4155,7 +6534,6 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) * Configure initial WMAC settings */ val32 = RCR_ACCEPT_PHYS_MATCH | RCR_ACCEPT_MCAST | RCR_ACCEPT_BCAST | - /* RCR_CHECK_BSSID_MATCH | RCR_CHECK_BSSID_BEACON | */ RCR_ACCEPT_MGMT_FRAME | RCR_HTC_LOC_CTRL | RCR_APPEND_PHYSTAT | RCR_APPEND_ICV | RCR_APPEND_MIC; rtl8xxxu_write32(priv, REG_RCR, val32); @@ -4220,6 +6598,42 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) rtl8xxxu_write16(priv, REG_BEACON_TCFG, 0x660F); /* + * Initialize burst parameters + */ + if (priv->rtlchip == 0x8723b) { + /* + * For USB high speed set 512B packets + */ + val8 = rtl8xxxu_read8(priv, REG_RXDMA_PRO_8723B); + val8 &= ~(BIT(4) | BIT(5)); + val8 |= BIT(4); + val8 |= BIT(1) | BIT(2) | BIT(3); + rtl8xxxu_write8(priv, REG_RXDMA_PRO_8723B, val8); + + /* + * For USB high speed set 512B packets + */ + val8 = rtl8xxxu_read8(priv, REG_HT_SINGLE_AMPDU_8723B); + val8 |= BIT(7); + rtl8xxxu_write8(priv, REG_HT_SINGLE_AMPDU_8723B, val8); + + rtl8xxxu_write16(priv, REG_MAX_AGGR_NUM, 0x0c14); + rtl8xxxu_write8(priv, REG_AMPDU_MAX_TIME_8723B, 0x5e); + rtl8xxxu_write32(priv, REG_AGGLEN_LMT, 0xffffffff); + rtl8xxxu_write8(priv, REG_RX_PKT_LIMIT, 0x18); + rtl8xxxu_write8(priv, REG_PIFS, 0x00); + rtl8xxxu_write8(priv, REG_USTIME_TSF_8723B, 0x50); + rtl8xxxu_write8(priv, REG_USTIME_EDCA, 0x50); + + val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL); + val8 |= BIT(5) | BIT(6); + rtl8xxxu_write8(priv, REG_RSV_CTRL, val8); + } + + if (priv->fops->init_aggregation) + priv->fops->init_aggregation(priv); + + /* * Enable CCK and OFDM block */ val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); @@ -4234,7 +6648,7 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) /* * Start out with default power levels for channel 6, 20MHz */ - rtl8723a_set_tx_power(priv, 1, false); + priv->fops->set_tx_power(priv, 1, false); /* Let the 8051 take control of antenna setting */ val8 = rtl8xxxu_read8(priv, REG_LEDCFG2); @@ -4248,78 +6662,37 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) rtl8xxxu_write16(priv, REG_FAST_EDCA_CTRL, 0); - /* - * Not sure if we should get into this at all - */ - if (priv->iqk_initialized) { - rtl8xxxu_restore_regs(priv, rtl8723au_iqk_phy_iq_bb_reg, - priv->bb_recovery_backup, - RTL8XXXU_BB_REGS); - } else { - rtl8723a_phy_iq_calibrate(priv); - priv->iqk_initialized = true; - } - - /* - * This should enable thermal meter - */ - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_T_METER, 0x60); + if (priv->fops->init_statistics) + priv->fops->init_statistics(priv); rtl8723a_phy_lc_calibrate(priv); - /* fix USB interface interference issue */ - rtl8xxxu_write8(priv, 0xfe40, 0xe0); - rtl8xxxu_write8(priv, 0xfe41, 0x8d); - rtl8xxxu_write8(priv, 0xfe42, 0x80); - rtl8xxxu_write32(priv, REG_TXDMA_OFFSET_CHK, 0xfd0320); - - /* Solve too many protocol error on USB bus */ - /* Can't do this for 8188/8192 UMC A cut parts */ - rtl8xxxu_write8(priv, 0xfe40, 0xe6); - rtl8xxxu_write8(priv, 0xfe41, 0x94); - rtl8xxxu_write8(priv, 0xfe42, 0x80); - - rtl8xxxu_write8(priv, 0xfe40, 0xe0); - rtl8xxxu_write8(priv, 0xfe41, 0x19); - rtl8xxxu_write8(priv, 0xfe42, 0x80); - - rtl8xxxu_write8(priv, 0xfe40, 0xe5); - rtl8xxxu_write8(priv, 0xfe41, 0x91); - rtl8xxxu_write8(priv, 0xfe42, 0x80); - - rtl8xxxu_write8(priv, 0xfe40, 0xe2); - rtl8xxxu_write8(priv, 0xfe41, 0x81); - rtl8xxxu_write8(priv, 0xfe42, 0x80); - - /* Init BT hw config. */ - rtl8xxxu_init_bt(priv); + priv->fops->phy_iq_calibrate(priv); /* - * Not sure if we really need to save these parameters, but the - * vendor driver does + * This should enable thermal meter */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_HSSI_PARM2); - if (val32 & FPGA0_HSSI_PARM2_CCK_HIGH_PWR) - priv->path_a_hi_power = 1; - - val32 = rtl8xxxu_read32(priv, REG_OFDM0_TRX_PATH_ENABLE); - priv->path_a_rf_paths = val32 & OFDM_RF_PATH_RX_MASK; - - val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1); - priv->path_a_ig_value = val32 & OFDM0_X_AGC_CORE1_IGI_MASK; + if (priv->fops->has_s0s1) + rtl8xxxu_write_rfreg(priv, + RF_A, RF6052_REG_T_METER_8723B, 0x37cf8); + else + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_T_METER, 0x60); /* Set NAV_UPPER to 30000us */ val8 = ((30000 + NAV_UPPER_UNIT - 1) / NAV_UPPER_UNIT); rtl8xxxu_write8(priv, REG_NAV_UPPER, val8); - /* - * 2011/03/09 MH debug only, UMC-B cut pass 2500 S5 test, - * but we need to fin root cause. - */ - val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); - if ((val32 & 0xff000000) != 0x83000000) { - val32 |= FPGA_RF_MODE_CCK; - rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32); + if (priv->rtlchip == 0x8723a) { + /* + * 2011/03/09 MH debug only, UMC-B cut pass 2500 S5 test, + * but we need to find root cause. + * This is 8723au only. + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); + if ((val32 & 0xff000000) != 0x83000000) { + val32 |= FPGA_RF_MODE_CCK; + rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32); + } } val32 = rtl8xxxu_read32(priv, REG_FWHW_TXQ_CTRL); @@ -4335,7 +6708,7 @@ static void rtl8xxxu_disable_device(struct ieee80211_hw *hw) { struct rtl8xxxu_priv *priv = hw->priv; - rtl8xxxu_power_off(priv); + priv->fops->power_off(priv); } static void rtl8xxxu_cam_write(struct rtl8xxxu_priv *priv, @@ -4381,7 +6754,7 @@ static void rtl8xxxu_cam_write(struct rtl8xxxu_priv *priv, } static void rtl8xxxu_sw_scan_start(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, const u8* mac) + struct ieee80211_vif *vif, const u8 *mac) { struct rtl8xxxu_priv *priv = hw->priv; u8 val8; @@ -4402,11 +6775,13 @@ static void rtl8xxxu_sw_scan_complete(struct ieee80211_hw *hw, rtl8xxxu_write8(priv, REG_BEACON_CTRL, val8); } -static void rtl8xxxu_update_rate_mask(struct rtl8xxxu_priv *priv, - u32 ramask, int sgi) +static void rtl8723au_update_rate_mask(struct rtl8xxxu_priv *priv, + u32 ramask, int sgi) { struct h2c_cmd h2c; + memset(&h2c, 0, sizeof(struct h2c_cmd)); + h2c.ramask.cmd = H2C_SET_RATE_MASK; h2c.ramask.mask_lo = cpu_to_le16(ramask & 0xffff); h2c.ramask.mask_hi = cpu_to_le16(ramask >> 16); @@ -4415,9 +6790,68 @@ static void rtl8xxxu_update_rate_mask(struct rtl8xxxu_priv *priv, if (sgi) h2c.ramask.arg |= 0x20; - dev_dbg(&priv->udev->dev, "%s: rate mask %08x, arg %02x\n", __func__, - ramask, h2c.ramask.arg); - rtl8723a_h2c_cmd(priv, &h2c); + dev_dbg(&priv->udev->dev, "%s: rate mask %08x, arg %02x, size %zi\n", + __func__, ramask, h2c.ramask.arg, sizeof(h2c.ramask)); + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.ramask)); +} + +static void rtl8723bu_update_rate_mask(struct rtl8xxxu_priv *priv, + u32 ramask, int sgi) +{ + struct h2c_cmd h2c; + u8 bw = 0; + + memset(&h2c, 0, sizeof(struct h2c_cmd)); + + h2c.b_macid_cfg.cmd = H2C_8723B_MACID_CFG_RAID; + h2c.b_macid_cfg.ramask0 = ramask & 0xff; + h2c.b_macid_cfg.ramask1 = (ramask >> 8) & 0xff; + h2c.b_macid_cfg.ramask2 = (ramask >> 16) & 0xff; + h2c.b_macid_cfg.ramask3 = (ramask >> 24) & 0xff; + + h2c.ramask.arg = 0x80; + h2c.b_macid_cfg.data1 = 0; + if (sgi) + h2c.b_macid_cfg.data1 |= BIT(7); + + h2c.b_macid_cfg.data2 = bw; + + dev_dbg(&priv->udev->dev, "%s: rate mask %08x, arg %02x, size %zi\n", + __func__, ramask, h2c.ramask.arg, sizeof(h2c.b_macid_cfg)); + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.b_macid_cfg)); +} + +static void rtl8723au_report_connect(struct rtl8xxxu_priv *priv, + u8 macid, bool connect) +{ + struct h2c_cmd h2c; + + memset(&h2c, 0, sizeof(struct h2c_cmd)); + + h2c.joinbss.cmd = H2C_JOIN_BSS_REPORT; + + if (connect) + h2c.joinbss.data = H2C_JOIN_BSS_CONNECT; + else + h2c.joinbss.data = H2C_JOIN_BSS_DISCONNECT; + + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.joinbss)); +} + +static void rtl8723bu_report_connect(struct rtl8xxxu_priv *priv, + u8 macid, bool connect) +{ + struct h2c_cmd h2c; + + memset(&h2c, 0, sizeof(struct h2c_cmd)); + + h2c.media_status_rpt.cmd = H2C_8723B_MEDIA_STATUS_RPT; + if (connect) + h2c.media_status_rpt.parm |= BIT(0); + else + h2c.media_status_rpt.parm &= ~BIT(0); + + rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.media_status_rpt)); } static void rtl8xxxu_set_basic_rates(struct rtl8xxxu_priv *priv, u32 rate_cfg) @@ -4452,11 +6886,8 @@ rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u8 val8; if (changed & BSS_CHANGED_ASSOC) { - struct h2c_cmd h2c; - dev_dbg(dev, "Changed ASSOC: %i!\n", bss_conf->assoc); - memset(&h2c, 0, sizeof(struct h2c_cmd)); rtl8xxxu_set_linktype(priv, vif->type); if (bss_conf->assoc) { @@ -4486,14 +6917,7 @@ rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, sgi = 1; rcu_read_unlock(); - rtl8xxxu_update_rate_mask(priv, ramask, sgi); - - val32 = rtl8xxxu_read32(priv, REG_RCR); - val32 |= RCR_CHECK_BSSID_MATCH | RCR_CHECK_BSSID_BEACON; - rtl8xxxu_write32(priv, REG_RCR, val32); - - /* Enable RX of data frames */ - rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0xffff); + priv->fops->update_rate_mask(priv, ramask, sgi); rtl8xxxu_write8(priv, REG_BCN_MAX_ERR, 0xff); @@ -4503,23 +6927,14 @@ rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, rtl8xxxu_write16(priv, REG_BCN_PSR_RPT, 0xc000 | bss_conf->aid); - h2c.joinbss.data = H2C_JOIN_BSS_CONNECT; + priv->fops->report_connect(priv, 0, true); } else { - val32 = rtl8xxxu_read32(priv, REG_RCR); - val32 &= ~(RCR_CHECK_BSSID_MATCH | - RCR_CHECK_BSSID_BEACON); - rtl8xxxu_write32(priv, REG_RCR, val32); - val8 = rtl8xxxu_read8(priv, REG_BEACON_CTRL); val8 |= BEACON_DISABLE_TSF_UPDATE; rtl8xxxu_write8(priv, REG_BEACON_CTRL, val8); - /* Disable RX of data frames */ - rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0x0000); - h2c.joinbss.data = H2C_JOIN_BSS_DISCONNECT; + priv->fops->report_connect(priv, 0, false); } - h2c.joinbss.cmd = H2C_JOIN_BSS_REPORT; - rtl8723a_h2c_cmd(priv, &h2c); } if (changed & BSS_CHANGED_ERP_PREAMBLE) { @@ -4594,7 +7009,12 @@ static u32 rtl8xxxu_queue_select(struct ieee80211_hw *hw, struct sk_buff *skb) return queue; } -static void rtl8xxxu_calc_tx_desc_csum(struct rtl8xxxu_tx_desc *tx_desc) +/* + * Despite newer chips 8723b/8812/8821 having a larger TX descriptor + * format. The descriptor checksum is still only calculated over the + * initial 32 bytes of the descriptor! + */ +static void rtl8xxxu_calc_tx_desc_csum(struct rtl8723au_tx_desc *tx_desc) { __le16 *ptr = (__le16 *)tx_desc; u16 csum = 0; @@ -4606,7 +7026,7 @@ static void rtl8xxxu_calc_tx_desc_csum(struct rtl8xxxu_tx_desc *tx_desc) */ tx_desc->csum = cpu_to_le16(0); - for (i = 0; i < (sizeof(struct rtl8xxxu_tx_desc) / sizeof(u16)); i++) + for (i = 0; i < (sizeof(struct rtl8723au_tx_desc) / sizeof(u16)); i++) csum = csum ^ le16_to_cpu(ptr[i]); tx_desc->csum |= cpu_to_le16(csum); @@ -4675,13 +7095,15 @@ static void rtl8xxxu_tx_complete(struct urb *urb) struct sk_buff *skb = (struct sk_buff *)urb->context; struct ieee80211_tx_info *tx_info; struct ieee80211_hw *hw; + struct rtl8xxxu_priv *priv; struct rtl8xxxu_tx_urb *tx_urb = container_of(urb, struct rtl8xxxu_tx_urb, urb); tx_info = IEEE80211_SKB_CB(skb); hw = tx_info->rate_driver_data[0]; + priv = hw->priv; - skb_pull(skb, sizeof(struct rtl8xxxu_tx_desc)); + skb_pull(skb, priv->fops->tx_desc_size); ieee80211_tx_info_clear_status(tx_info); tx_info->status.rates[0].idx = -1; @@ -4692,7 +7114,7 @@ static void rtl8xxxu_tx_complete(struct urb *urb) ieee80211_tx_status_irqsafe(hw, skb); - rtl8xxxu_free_tx_urb(hw->priv, tx_urb); + rtl8xxxu_free_tx_urb(priv, tx_urb); } static void rtl8xxxu_dump_action(struct device *dev, @@ -4742,7 +7164,8 @@ static void rtl8xxxu_tx(struct ieee80211_hw *hw, struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct ieee80211_rate *tx_rate = ieee80211_get_tx_rate(hw, tx_info); struct rtl8xxxu_priv *priv = hw->priv; - struct rtl8xxxu_tx_desc *tx_desc; + struct rtl8723au_tx_desc *tx_desc; + struct rtl8723bu_tx_desc *tx_desc40; struct rtl8xxxu_tx_urb *tx_urb; struct ieee80211_sta *sta = NULL; struct ieee80211_vif *vif = tx_info->control.vif; @@ -4751,16 +7174,18 @@ static void rtl8xxxu_tx(struct ieee80211_hw *hw, u16 pktlen = skb->len; u16 seq_number; u16 rate_flag = tx_info->control.rates[0].flags; + int tx_desc_size = priv->fops->tx_desc_size; int ret; + bool usedesc40, ampdu_enable; - if (skb_headroom(skb) < sizeof(struct rtl8xxxu_tx_desc)) { + if (skb_headroom(skb) < tx_desc_size) { dev_warn(dev, "%s: Not enough headroom (%i) for tx descriptor\n", __func__, skb_headroom(skb)); goto error; } - if (unlikely(skb->len > (65535 - sizeof(struct rtl8xxxu_tx_desc)))) { + if (unlikely(skb->len > (65535 - tx_desc_size))) { dev_warn(dev, "%s: Trying to send over-sized skb (%i)\n", __func__, skb->len); goto error; @@ -4779,17 +7204,17 @@ static void rtl8xxxu_tx(struct ieee80211_hw *hw, if (ieee80211_is_action(hdr->frame_control)) rtl8xxxu_dump_action(dev, hdr); + usedesc40 = (tx_desc_size == 40); tx_info->rate_driver_data[0] = hw; if (control && control->sta) sta = control->sta; - tx_desc = (struct rtl8xxxu_tx_desc *) - skb_push(skb, sizeof(struct rtl8xxxu_tx_desc)); + tx_desc = (struct rtl8723au_tx_desc *)skb_push(skb, tx_desc_size); - memset(tx_desc, 0, sizeof(struct rtl8xxxu_tx_desc)); + memset(tx_desc, 0, tx_desc_size); tx_desc->pkt_size = cpu_to_le16(pktlen); - tx_desc->pkt_offset = sizeof(struct rtl8xxxu_tx_desc); + tx_desc->pkt_offset = tx_desc_size; tx_desc->txdw0 = TXDESC_OWN | TXDESC_FIRST_SEGMENT | TXDESC_LAST_SEGMENT; @@ -4815,19 +7240,8 @@ static void rtl8xxxu_tx(struct ieee80211_hw *hw, } } - seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl)); - tx_desc->txdw3 = cpu_to_le32((u32)seq_number << TXDESC_SEQ_SHIFT); - - if (rate_flag & IEEE80211_TX_RC_MCS) - rate = tx_info->control.rates[0].idx + DESC_RATE_MCS0; - else - rate = tx_rate->hw_value; - tx_desc->txdw5 = cpu_to_le32(rate); - - if (ieee80211_is_data(hdr->frame_control)) - tx_desc->txdw5 |= cpu_to_le32(0x0001ff00); - /* (tx_info->flags & IEEE80211_TX_CTL_AMPDU) && */ + ampdu_enable = false; if (ieee80211_is_data_qos(hdr->frame_control) && sta) { if (sta->ht_cap.ht_supported) { u32 ampdu, val32; @@ -4835,35 +7249,118 @@ static void rtl8xxxu_tx(struct ieee80211_hw *hw, ampdu = (u32)sta->ht_cap.ampdu_density; val32 = ampdu << TXDESC_AMPDU_DENSITY_SHIFT; tx_desc->txdw2 |= cpu_to_le32(val32); - tx_desc->txdw1 |= cpu_to_le32(TXDESC_AGG_ENABLE); - } else - tx_desc->txdw1 |= cpu_to_le32(TXDESC_BK); - } else - tx_desc->txdw1 |= cpu_to_le32(TXDESC_BK); - if (ieee80211_is_data_qos(hdr->frame_control)) - tx_desc->txdw4 |= cpu_to_le32(TXDESC_QOS); - if (rate_flag & IEEE80211_TX_RC_USE_SHORT_PREAMBLE || - (sta && vif && vif->bss_conf.use_short_preamble)) - tx_desc->txdw4 |= cpu_to_le32(TXDESC_SHORT_PREAMBLE); - if (rate_flag & IEEE80211_TX_RC_SHORT_GI || - (ieee80211_is_data_qos(hdr->frame_control) && - sta && sta->ht_cap.cap & - (IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_SGI_20))) { - tx_desc->txdw5 |= cpu_to_le32(TXDESC_SHORT_GI); - } - if (ieee80211_is_mgmt(hdr->frame_control)) { - tx_desc->txdw5 = cpu_to_le32(tx_rate->hw_value); - tx_desc->txdw4 |= cpu_to_le32(TXDESC_USE_DRIVER_RATE); - tx_desc->txdw5 |= cpu_to_le32(6 << TXDESC_RETRY_LIMIT_SHIFT); - tx_desc->txdw5 |= cpu_to_le32(TXDESC_RETRY_LIMIT_ENABLE); + ampdu_enable = true; + } } - if (rate_flag & IEEE80211_TX_RC_USE_RTS_CTS) { - /* Use RTS rate 24M - does the mac80211 tell us which to use? */ - tx_desc->txdw4 |= cpu_to_le32(DESC_RATE_24M); - tx_desc->txdw4 |= cpu_to_le32(TXDESC_RTS_CTS_ENABLE); - tx_desc->txdw4 |= cpu_to_le32(TXDESC_HW_RTS_ENABLE); + if (rate_flag & IEEE80211_TX_RC_MCS) + rate = tx_info->control.rates[0].idx + DESC_RATE_MCS0; + else + rate = tx_rate->hw_value; + + seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl)); + if (!usedesc40) { + tx_desc->txdw5 = cpu_to_le32(rate); + + if (ieee80211_is_data(hdr->frame_control)) + tx_desc->txdw5 |= cpu_to_le32(0x0001ff00); + + tx_desc->txdw3 = + cpu_to_le32((u32)seq_number << TXDESC_SEQ_SHIFT_8723A); + + if (ampdu_enable) + tx_desc->txdw1 |= cpu_to_le32(TXDESC_AGG_ENABLE_8723A); + else + tx_desc->txdw1 |= cpu_to_le32(TXDESC_AGG_BREAK_8723A); + + if (ieee80211_is_mgmt(hdr->frame_control)) { + tx_desc->txdw5 = cpu_to_le32(tx_rate->hw_value); + tx_desc->txdw4 |= + cpu_to_le32(TXDESC_USE_DRIVER_RATE_8723A); + tx_desc->txdw5 |= + cpu_to_le32(6 << + TXDESC_RETRY_LIMIT_SHIFT_8723A); + tx_desc->txdw5 |= + cpu_to_le32(TXDESC_RETRY_LIMIT_ENABLE_8723A); + } + + if (ieee80211_is_data_qos(hdr->frame_control)) + tx_desc->txdw4 |= cpu_to_le32(TXDESC_QOS_8723A); + + if (rate_flag & IEEE80211_TX_RC_USE_SHORT_PREAMBLE || + (sta && vif && vif->bss_conf.use_short_preamble)) + tx_desc->txdw4 |= + cpu_to_le32(TXDESC_SHORT_PREAMBLE_8723A); + + if (rate_flag & IEEE80211_TX_RC_SHORT_GI || + (ieee80211_is_data_qos(hdr->frame_control) && + sta && sta->ht_cap.cap & + (IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_SGI_20))) { + tx_desc->txdw5 |= cpu_to_le32(TXDESC_SHORT_GI); + } + + if (rate_flag & IEEE80211_TX_RC_USE_RTS_CTS) { + /* + * Use RTS rate 24M - does the mac80211 tell + * us which to use? + */ + tx_desc->txdw4 |= + cpu_to_le32(DESC_RATE_24M << + TXDESC_RTS_RATE_SHIFT_8723A); + tx_desc->txdw4 |= + cpu_to_le32(TXDESC_RTS_CTS_ENABLE_8723A); + tx_desc->txdw4 |= + cpu_to_le32(TXDESC_HW_RTS_ENABLE_8723A); + } + } else { + tx_desc40 = (struct rtl8723bu_tx_desc *)tx_desc; + + tx_desc40->txdw4 = cpu_to_le32(rate); + if (ieee80211_is_data(hdr->frame_control)) { + tx_desc->txdw4 |= + cpu_to_le32(0x1f << + TXDESC_DATA_RATE_FB_SHIFT_8723B); + } + + tx_desc40->txdw9 = + cpu_to_le32((u32)seq_number << TXDESC_SEQ_SHIFT_8723B); + + if (ampdu_enable) + tx_desc40->txdw2 |= + cpu_to_le32(TXDESC_AGG_ENABLE_8723B); + else + tx_desc40->txdw2 |= cpu_to_le32(TXDESC_AGG_BREAK_8723B); + + if (ieee80211_is_mgmt(hdr->frame_control)) { + tx_desc40->txdw4 = cpu_to_le32(tx_rate->hw_value); + tx_desc40->txdw3 |= + cpu_to_le32(TXDESC_USE_DRIVER_RATE_8723B); + tx_desc40->txdw4 |= + cpu_to_le32(6 << + TXDESC_RETRY_LIMIT_SHIFT_8723B); + tx_desc40->txdw4 |= + cpu_to_le32(TXDESC_RETRY_LIMIT_ENABLE_8723B); + } + + if (rate_flag & IEEE80211_TX_RC_USE_SHORT_PREAMBLE || + (sta && vif && vif->bss_conf.use_short_preamble)) + tx_desc40->txdw5 |= + cpu_to_le32(TXDESC_SHORT_PREAMBLE_8723B); + + if (rate_flag & IEEE80211_TX_RC_USE_RTS_CTS) { + /* + * Use RTS rate 24M - does the mac80211 tell + * us which to use? + */ + tx_desc->txdw4 |= + cpu_to_le32(DESC_RATE_24M << + TXDESC_RTS_RATE_SHIFT_8723B); + tx_desc->txdw3 |= + cpu_to_le32(TXDESC_RTS_CTS_ENABLE_8723B); + tx_desc->txdw3 |= + cpu_to_le32(TXDESC_HW_RTS_ENABLE_8723B); + } } rtl8xxxu_calc_tx_desc_csum(tx_desc); @@ -4885,13 +7382,13 @@ error: static void rtl8xxxu_rx_parse_phystats(struct rtl8xxxu_priv *priv, struct ieee80211_rx_status *rx_status, - struct rtl8xxxu_rx_desc *rx_desc, - struct rtl8723au_phy_stats *phy_stats) + struct rtl8723au_phy_stats *phy_stats, + u32 rxmcs) { if (phy_stats->sgi_en) rx_status->flag |= RX_FLAG_SHORT_GI; - if (rx_desc->rxmcs < DESC_RATE_6M) { + if (rxmcs < DESC_RATE_6M) { /* * Handle PHY stats for CCK rates */ @@ -5002,6 +7499,138 @@ static void rtl8xxxu_rx_urb_work(struct work_struct *work) } } +static int rtl8723au_parse_rx_desc(struct rtl8xxxu_priv *priv, + struct sk_buff *skb, + struct ieee80211_rx_status *rx_status) +{ + struct rtl8xxxu_rx_desc *rx_desc = (struct rtl8xxxu_rx_desc *)skb->data; + struct rtl8723au_phy_stats *phy_stats; + int drvinfo_sz, desc_shift; + + skb_pull(skb, sizeof(struct rtl8xxxu_rx_desc)); + + phy_stats = (struct rtl8723au_phy_stats *)skb->data; + + drvinfo_sz = rx_desc->drvinfo_sz * 8; + desc_shift = rx_desc->shift; + skb_pull(skb, drvinfo_sz + desc_shift); + + if (rx_desc->phy_stats) + rtl8xxxu_rx_parse_phystats(priv, rx_status, phy_stats, + rx_desc->rxmcs); + + rx_status->mactime = le32_to_cpu(rx_desc->tsfl); + rx_status->flag |= RX_FLAG_MACTIME_START; + + if (!rx_desc->swdec) + rx_status->flag |= RX_FLAG_DECRYPTED; + if (rx_desc->crc32) + rx_status->flag |= RX_FLAG_FAILED_FCS_CRC; + if (rx_desc->bw) + rx_status->flag |= RX_FLAG_40MHZ; + + if (rx_desc->rxht) { + rx_status->flag |= RX_FLAG_HT; + rx_status->rate_idx = rx_desc->rxmcs - DESC_RATE_MCS0; + } else { + rx_status->rate_idx = rx_desc->rxmcs; + } + + return RX_TYPE_DATA_PKT; +} + +static int rtl8723bu_parse_rx_desc(struct rtl8xxxu_priv *priv, + struct sk_buff *skb, + struct ieee80211_rx_status *rx_status) +{ + struct rtl8723bu_rx_desc *rx_desc = + (struct rtl8723bu_rx_desc *)skb->data; + struct rtl8723au_phy_stats *phy_stats; + int drvinfo_sz, desc_shift; + + skb_pull(skb, sizeof(struct rtl8723bu_rx_desc)); + + phy_stats = (struct rtl8723au_phy_stats *)skb->data; + + drvinfo_sz = rx_desc->drvinfo_sz * 8; + desc_shift = rx_desc->shift; + skb_pull(skb, drvinfo_sz + desc_shift); + + if (rx_desc->rpt_sel) { + struct device *dev = &priv->udev->dev; + dev_dbg(dev, "%s: C2H packet\n", __func__); + return RX_TYPE_C2H; + } + + if (rx_desc->phy_stats) + rtl8xxxu_rx_parse_phystats(priv, rx_status, phy_stats, + rx_desc->rxmcs); + + rx_status->mactime = le32_to_cpu(rx_desc->tsfl); + rx_status->flag |= RX_FLAG_MACTIME_START; + + if (!rx_desc->swdec) + rx_status->flag |= RX_FLAG_DECRYPTED; + if (rx_desc->crc32) + rx_status->flag |= RX_FLAG_FAILED_FCS_CRC; + if (rx_desc->bw) + rx_status->flag |= RX_FLAG_40MHZ; + + if (rx_desc->rxmcs >= DESC_RATE_MCS0) { + rx_status->flag |= RX_FLAG_HT; + rx_status->rate_idx = rx_desc->rxmcs - DESC_RATE_MCS0; + } else { + rx_status->rate_idx = rx_desc->rxmcs; + } + + return RX_TYPE_DATA_PKT; +} + +static void rtl8723bu_handle_c2h(struct rtl8xxxu_priv *priv, + struct sk_buff *skb) +{ + struct rtl8723bu_c2h *c2h = (struct rtl8723bu_c2h *)skb->data; + struct device *dev = &priv->udev->dev; + int len; + + len = skb->len - 2; + + dev_dbg(dev, "C2H ID %02x seq %02x, len %02x source %02x\n", + c2h->id, c2h->seq, len, c2h->bt_info.response_source); + + switch(c2h->id) { + case C2H_8723B_BT_INFO: + if (c2h->bt_info.response_source > + BT_INFO_SRC_8723B_BT_ACTIVE_SEND) + dev_dbg(dev, "C2H_BT_INFO WiFi only firmware\n"); + else + dev_dbg(dev, "C2H_BT_INFO BT/WiFi coexist firmware\n"); + + if (c2h->bt_info.bt_has_reset) + dev_dbg(dev, "BT has been reset\n"); + if (c2h->bt_info.tx_rx_mask) + dev_dbg(dev, "BT TRx mask\n"); + + break; + case C2H_8723B_BT_MP_INFO: + dev_dbg(dev, "C2H_MP_INFO ext ID %02x, status %02x\n", + c2h->bt_mp_info.ext_id, c2h->bt_mp_info.status); + break; + case C2H_8723B_RA_REPORT: + dev_dbg(dev, + "C2H RA RPT: rate %02x, unk %i, macid %02x, noise %i\n", + c2h->ra_report.rate, c2h->ra_report.dummy0_0, + c2h->ra_report.macid, c2h->ra_report.noisy_state); + break; + default: + dev_info(dev, "Unhandled C2H event %02x seq %02x\n", + c2h->id, c2h->seq); + print_hex_dump(KERN_INFO, "C2H content: ", DUMP_PREFIX_NONE, + 16, 1, c2h->raw.payload, len, false); + break; + } +} + static void rtl8xxxu_rx_complete(struct urb *urb) { struct rtl8xxxu_rx_urb *rx_urb = @@ -5009,59 +7638,32 @@ static void rtl8xxxu_rx_complete(struct urb *urb) struct ieee80211_hw *hw = rx_urb->hw; struct rtl8xxxu_priv *priv = hw->priv; struct sk_buff *skb = (struct sk_buff *)urb->context; - struct rtl8xxxu_rx_desc *rx_desc = (struct rtl8xxxu_rx_desc *)skb->data; - struct rtl8723au_phy_stats *phy_stats; struct ieee80211_rx_status *rx_status = IEEE80211_SKB_RXCB(skb); - struct ieee80211_mgmt *mgmt; struct device *dev = &priv->udev->dev; __le32 *_rx_desc_le = (__le32 *)skb->data; u32 *_rx_desc = (u32 *)skb->data; - int cnt, len, drvinfo_sz, desc_shift, i; + int rx_type, i; for (i = 0; i < (sizeof(struct rtl8xxxu_rx_desc) / sizeof(u32)); i++) _rx_desc[i] = le32_to_cpu(_rx_desc_le[i]); - cnt = rx_desc->frag; - len = rx_desc->pktlen; - drvinfo_sz = rx_desc->drvinfo_sz * 8; - desc_shift = rx_desc->shift; skb_put(skb, urb->actual_length); if (urb->status == 0) { - skb_pull(skb, sizeof(struct rtl8xxxu_rx_desc)); - phy_stats = (struct rtl8723au_phy_stats *)skb->data; - - skb_pull(skb, drvinfo_sz + desc_shift); - - mgmt = (struct ieee80211_mgmt *)skb->data; - memset(rx_status, 0, sizeof(struct ieee80211_rx_status)); - if (rx_desc->phy_stats) - rtl8xxxu_rx_parse_phystats(priv, rx_status, - rx_desc, phy_stats); + rx_type = priv->fops->parse_rx_desc(priv, skb, rx_status); rx_status->freq = hw->conf.chandef.chan->center_freq; rx_status->band = hw->conf.chandef.chan->band; - rx_status->mactime = le32_to_cpu(rx_desc->tsfl); - rx_status->flag |= RX_FLAG_MACTIME_START; - - if (!rx_desc->swdec) - rx_status->flag |= RX_FLAG_DECRYPTED; - if (rx_desc->crc32) - rx_status->flag |= RX_FLAG_FAILED_FCS_CRC; - if (rx_desc->bw) - rx_status->flag |= RX_FLAG_40MHZ; - - if (rx_desc->rxht) { - rx_status->flag |= RX_FLAG_HT; - rx_status->rate_idx = rx_desc->rxmcs - DESC_RATE_MCS0; - } else { - rx_status->rate_idx = rx_desc->rxmcs; + if (rx_type == RX_TYPE_DATA_PKT) + ieee80211_rx_irqsafe(hw, skb); + else { + rtl8723bu_handle_c2h(priv, skb); + dev_kfree_skb(skb); } - ieee80211_rx_irqsafe(hw, skb); skb = NULL; rx_urb->urb.context = NULL; rtl8xxxu_queue_rx_urb(priv, rx_urb); @@ -5218,9 +7820,9 @@ static int rtl8xxxu_config(struct ieee80211_hw *hw, u32 changed) channel = hw->conf.chandef.chan->hw_value; - rtl8723a_set_tx_power(priv, channel, ht40); + priv->fops->set_tx_power(priv, channel, ht40); - rtl8723au_config_channel(hw); + priv->fops->config_channel(hw); } exit: @@ -5284,11 +7886,56 @@ static void rtl8xxxu_configure_filter(struct ieee80211_hw *hw, unsigned int *total_flags, u64 multicast) { struct rtl8xxxu_priv *priv = hw->priv; + u32 rcr = rtl8xxxu_read32(priv, REG_RCR); dev_dbg(&priv->udev->dev, "%s: changed_flags %08x, total_flags %08x\n", __func__, changed_flags, *total_flags); - *total_flags &= (FIF_ALLMULTI | FIF_CONTROL | FIF_BCN_PRBRESP_PROMISC); + /* + * FIF_ALLMULTI ignored as all multicast frames are accepted (REG_MAR) + */ + + if (*total_flags & FIF_FCSFAIL) + rcr |= RCR_ACCEPT_CRC32; + else + rcr &= ~RCR_ACCEPT_CRC32; + + /* + * FIF_PLCPFAIL not supported? + */ + + if (*total_flags & FIF_BCN_PRBRESP_PROMISC) + rcr &= ~RCR_CHECK_BSSID_BEACON; + else + rcr |= RCR_CHECK_BSSID_BEACON; + + if (*total_flags & FIF_CONTROL) + rcr |= RCR_ACCEPT_CTRL_FRAME; + else + rcr &= ~RCR_ACCEPT_CTRL_FRAME; + + if (*total_flags & FIF_OTHER_BSS) { + rcr |= RCR_ACCEPT_AP; + rcr &= ~RCR_CHECK_BSSID_MATCH; + } else { + rcr &= ~RCR_ACCEPT_AP; + rcr |= RCR_CHECK_BSSID_MATCH; + } + + if (*total_flags & FIF_PSPOLL) + rcr |= RCR_ACCEPT_PM; + else + rcr &= ~RCR_ACCEPT_PM; + + /* + * FIF_PROBE_REQ ignored as probe requests always seem to be accepted + */ + + rtl8xxxu_write32(priv, REG_RCR, rcr); + + *total_flags &= (FIF_ALLMULTI | FIF_FCSFAIL | FIF_BCN_PRBRESP_PROMISC | + FIF_CONTROL | FIF_OTHER_BSS | FIF_PSPOLL | + FIF_PROBE_REQ); } static int rtl8xxxu_set_rts_threshold(struct ieee80211_hw *hw, u32 rts) @@ -5431,10 +8078,12 @@ static int rtl8xxxu_start(struct ieee80211_hw *hw) init_usb_anchor(&priv->tx_anchor); init_usb_anchor(&priv->int_anchor); - rtl8723a_enable_rf(priv); - ret = rtl8xxxu_submit_int_urb(hw); - if (ret) - goto exit; + priv->fops->enable_rf(priv); + if (priv->usb_interrupts) { + ret = rtl8xxxu_submit_int_urb(hw); + if (ret) + goto exit; + } for (i = 0; i < RTL8XXXU_TX_URBS; i++) { tx_urb = kmalloc(sizeof(struct rtl8xxxu_tx_urb), GFP_KERNEL); @@ -5473,12 +8122,9 @@ static int rtl8xxxu_start(struct ieee80211_hw *hw) } exit: /* - * Disable all data frames - */ - rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0x0000); - /* - * Accept all mgmt frames + * Accept all data and mgmt frames */ + rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0xffff); rtl8xxxu_write16(priv, REG_RXFLTMAP0, 0xffff); rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, 0x6954341e); @@ -5512,14 +8158,16 @@ static void rtl8xxxu_stop(struct ieee80211_hw *hw) usb_kill_anchored_urbs(&priv->rx_anchor); usb_kill_anchored_urbs(&priv->tx_anchor); - usb_kill_anchored_urbs(&priv->int_anchor); + if (priv->usb_interrupts) + usb_kill_anchored_urbs(&priv->int_anchor); - rtl8723a_disable_rf(priv); + priv->fops->disable_rf(priv); /* * Disable interrupts */ - rtl8xxxu_write32(priv, REG_USB_HIMR, 0); + if (priv->usb_interrupts) + rtl8xxxu_write32(priv, REG_USB_HIMR, 0); rtl8xxxu_free_rx_resources(priv); rtl8xxxu_free_tx_resources(priv); @@ -5650,7 +8298,7 @@ static int rtl8xxxu_probe(struct usb_interface *interface, } if (untested) { - rtl8xxxu_debug = RTL8XXXU_DEBUG_EFUSE; + rtl8xxxu_debug |= RTL8XXXU_DEBUG_EFUSE; dev_info(&udev->dev, "This Realtek USB WiFi dongle (0x%04x:0x%04x) is untested!\n", id->idVendor, id->idProduct); @@ -5744,7 +8392,7 @@ static int rtl8xxxu_probe(struct usb_interface *interface, SET_IEEE80211_DEV(priv->hw, &interface->dev); SET_IEEE80211_PERM_ADDR(hw, priv->mac_addr); - hw->extra_tx_headroom = sizeof(struct rtl8xxxu_tx_desc); + hw->extra_tx_headroom = priv->fops->tx_desc_size; ieee80211_hw_set(hw, SIGNAL_DBM); /* * The firmware handles rate control @@ -5792,7 +8440,54 @@ static struct rtl8xxxu_fileops rtl8723au_fops = { .parse_efuse = rtl8723au_parse_efuse, .load_firmware = rtl8723au_load_firmware, .power_on = rtl8723au_power_on, + .power_off = rtl8xxxu_power_off, + .reset_8051 = rtl8xxxu_reset_8051, + .llt_init = rtl8xxxu_init_llt_table, + .phy_iq_calibrate = rtl8723au_phy_iq_calibrate, + .config_channel = rtl8723au_config_channel, + .parse_rx_desc = rtl8723au_parse_rx_desc, + .enable_rf = rtl8723a_enable_rf, + .disable_rf = rtl8723a_disable_rf, + .set_tx_power = rtl8723a_set_tx_power, + .update_rate_mask = rtl8723au_update_rate_mask, + .report_connect = rtl8723au_report_connect, + .writeN_block_size = 1024, + .mbox_ext_reg = REG_HMBOX_EXT_0, + .mbox_ext_width = 2, + .tx_desc_size = sizeof(struct rtl8723au_tx_desc), + .adda_1t_init = 0x0b1b25a0, + .adda_1t_path_on = 0x0bdb25a0, + .adda_2t_path_on_a = 0x04db25a4, + .adda_2t_path_on_b = 0x0b1b25a4, +}; + +static struct rtl8xxxu_fileops rtl8723bu_fops = { + .parse_efuse = rtl8723bu_parse_efuse, + .load_firmware = rtl8723bu_load_firmware, + .power_on = rtl8723bu_power_on, + .power_off = rtl8723bu_power_off, + .reset_8051 = rtl8723bu_reset_8051, + .llt_init = rtl8xxxu_auto_llt_table, + .phy_init_antenna_selection = rtl8723bu_phy_init_antenna_selection, + .phy_iq_calibrate = rtl8723bu_phy_iq_calibrate, + .config_channel = rtl8723bu_config_channel, + .parse_rx_desc = rtl8723bu_parse_rx_desc, + .init_aggregation = rtl8723bu_init_aggregation, + .init_statistics = rtl8723bu_init_statistics, + .enable_rf = rtl8723b_enable_rf, + .disable_rf = rtl8723b_disable_rf, + .set_tx_power = rtl8723b_set_tx_power, + .update_rate_mask = rtl8723bu_update_rate_mask, + .report_connect = rtl8723bu_report_connect, .writeN_block_size = 1024, + .mbox_ext_reg = REG_HMBOX_EXT0_8723B, + .mbox_ext_width = 4, + .tx_desc_size = sizeof(struct rtl8723bu_tx_desc), + .has_s0s1 = 1, + .adda_1t_init = 0x01c00014, + .adda_1t_path_on = 0x01c00014, + .adda_2t_path_on_a = 0x01c00014, + .adda_2t_path_on_b = 0x01c00014, }; #ifdef CONFIG_RTL8XXXU_UNTESTED @@ -5801,11 +8496,55 @@ static struct rtl8xxxu_fileops rtl8192cu_fops = { .parse_efuse = rtl8192cu_parse_efuse, .load_firmware = rtl8192cu_load_firmware, .power_on = rtl8192cu_power_on, + .power_off = rtl8xxxu_power_off, + .reset_8051 = rtl8xxxu_reset_8051, + .llt_init = rtl8xxxu_init_llt_table, + .phy_iq_calibrate = rtl8723au_phy_iq_calibrate, + .config_channel = rtl8723au_config_channel, + .parse_rx_desc = rtl8723au_parse_rx_desc, + .enable_rf = rtl8723a_enable_rf, + .disable_rf = rtl8723a_disable_rf, + .set_tx_power = rtl8723a_set_tx_power, + .update_rate_mask = rtl8723au_update_rate_mask, + .report_connect = rtl8723au_report_connect, .writeN_block_size = 128, + .mbox_ext_reg = REG_HMBOX_EXT_0, + .mbox_ext_width = 2, + .tx_desc_size = sizeof(struct rtl8723au_tx_desc), + .adda_1t_init = 0x0b1b25a0, + .adda_1t_path_on = 0x0bdb25a0, + .adda_2t_path_on_a = 0x04db25a4, + .adda_2t_path_on_b = 0x0b1b25a4, }; #endif +static struct rtl8xxxu_fileops rtl8192eu_fops = { + .parse_efuse = rtl8192eu_parse_efuse, + .load_firmware = rtl8192eu_load_firmware, + .power_on = rtl8192eu_power_on, + .power_off = rtl8xxxu_power_off, + .reset_8051 = rtl8xxxu_reset_8051, + .llt_init = rtl8xxxu_auto_llt_table, + .phy_iq_calibrate = rtl8723bu_phy_iq_calibrate, + .config_channel = rtl8723bu_config_channel, + .parse_rx_desc = rtl8723bu_parse_rx_desc, + .enable_rf = rtl8723b_enable_rf, + .disable_rf = rtl8723b_disable_rf, + .set_tx_power = rtl8723b_set_tx_power, + .update_rate_mask = rtl8723au_update_rate_mask, + .report_connect = rtl8723au_report_connect, + .writeN_block_size = 128, + .mbox_ext_reg = REG_HMBOX_EXT0_8723B, + .mbox_ext_width = 4, + .tx_desc_size = sizeof(struct rtl8723au_tx_desc), + .has_s0s1 = 1, + .adda_1t_init = 0x0fc01616, + .adda_1t_path_on = 0x0fc01616, + .adda_2t_path_on_a = 0x0fc01616, + .adda_2t_path_on_b = 0x0fc01616, +}; + static struct usb_device_id dev_table[] = { {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8724, 0xff, 0xff, 0xff), .driver_info = (unsigned long)&rtl8723au_fops}, @@ -5813,6 +8552,10 @@ static struct usb_device_id dev_table[] = { .driver_info = (unsigned long)&rtl8723au_fops}, {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x0724, 0xff, 0xff, 0xff), .driver_info = (unsigned long)&rtl8723au_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x818b, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192eu_fops}, +{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0xb720, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8723bu_fops}, #ifdef CONFIG_RTL8XXXU_UNTESTED /* Still supported by rtlwifi */ {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8176, 0xff, 0xff, 0xff), @@ -5891,8 +8634,6 @@ static struct usb_device_id dev_table[] = { .driver_info = (unsigned long)&rtl8192cu_fops}, {USB_DEVICE_AND_INTERFACE_INFO(0xcdab, 0x8010, 0xff, 0xff, 0xff), .driver_info = (unsigned long)&rtl8192cu_fops}, -{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x317f, 0xff, 0xff, 0xff), - .driver_info = (unsigned long)&rtl8192cu_fops}, /* Netcore 8188RU */ {USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaff7, 0xff, 0xff, 0xff), .driver_info = (unsigned long)&rtl8192cu_fops}, {USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaff9, 0xff, 0xff, 0xff), |
